Add initial screen for receiving waypoints (#2452)

* Add files via upload

* Add files via upload

bpi_picow_esp32_s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "bpi_picow_esp32_s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BPI-PicoW-S3 (8 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.banana-pi.org/BPI-PicoW-S3",
+  "vendor": "BPI"
+}

platformio.ini

@@ -105,7 +105,7 @@ lib_deps =
   adafruit/Adafruit Unified Sensor@^1.1.9
   adafruit/Adafruit BMP280 Library@^2.6.6
   adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BME680 Library@^2.0.1
+  https://github.com/meshtastic/BSEC-Arduino-library.git#452f9a7ffa8b53e1debe2c454fe375dfad98b507
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0

src/ButtonThread.h

@@ -45,10 +45,10 @@ class ButtonThread : public concurrency::OSThread
     ButtonThread() : OSThread("Button")
     {
 #ifdef BUTTON_PIN
-        userButton = OneButton(BUTTON_PIN, true, true);
+        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
 #ifdef INPUT_PULLUP_SENSE
         // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
+        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
         userButton.setClickTicks(300);
@@ -57,7 +57,7 @@ class ButtonThread : public concurrency::OSThread
         userButton.attachMultiClick(userButtonMultiPressed);
         userButton.attachLongPressStart(userButtonPressedLongStart);
         userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN, FALLING);
+        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
@@ -115,7 +115,9 @@ class ButtonThread : public concurrency::OSThread
     {
         // LOG_DEBUG("press!\n");
 #ifdef BUTTON_PIN
-        if ((BUTTON_PIN != moduleConfig.canned_message.inputbroker_pin_press) || !moduleConfig.canned_message.enabled) {
+        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+             moduleConfig.canned_message.inputbroker_pin_press) ||
+            !moduleConfig.canned_message.enabled) {
             powerFSM.trigger(EVENT_PRESS);
         }
 #endif

src/Power.cpp

@@ -351,40 +351,39 @@ void Power::readPowerStatus()
             sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
             auto newHeap = memGet.getFreeHeap();
-            std::string heapTopic = (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + "/2/heap/" + std::string(mac);
+            std::string heapTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
             std::string heapString = std::to_string(newHeap);
             mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
-            // auto fragHeap = memGet.getHeapFragmentation();
             auto wifiRSSI = WiFi.RSSI();
-            heapTopic = (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + "/2/wifi/" + std::string(mac);
+            std::string wifiTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
             std::string wifiString = std::to_string(wifiRSSI);
-            mqtt->pubSub.publish(heapTopic.c_str(), wifiString.c_str(), false);
+            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
         }
 #endif
 
 #endif
 
-// If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
-// Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef ARCH_NRF52
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in a
+        // row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                LOG_DEBUG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
                     // We can't trigger deep sleep on NRF52, it's freezing the board
-                    // powerFSM.trigger(EVENT_LOW_BATTERY);
                     LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+#else
+                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                    powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
                 }
             } else {
                 low_voltage_counter = 0;
             }
         }
-#else
-        // If we have a battery at all and it is less than 10% full, force deep sleep
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB() && batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS)
-            powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
     } else {
         // No power sensing on this board - tell everyone else we have no idea what is happening
         const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
@@ -538,7 +537,6 @@ bool Power::axpChipInit()
 
         // Set up the charging voltage
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
@@ -730,4 +728,4 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
+}

src/PowerFSM.cpp

@@ -99,7 +99,7 @@ static void lsIdle()
                 LOG_INFO("wakeCause2 %d\n", wakeCause2);
 
 #ifdef BUTTON_PIN
-                bool pressed = !digitalRead(BUTTON_PIN);
+                bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #else
                 bool pressed = false;
 #endif
@@ -295,10 +295,10 @@ void PowerFSM_setup()
         powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
-        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text"); // restarts the sleep timer
+        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text"); // restarts the sleep timer
     }
 
     // If we are not in statePOWER but get a serial connection, suppress sleep (and keep the screen on) while connected

src/PowerFSM.h

@@ -8,7 +8,7 @@
 #define EVENT_WAKE_TIMER 2
 // #define EVENT_RECEIVED_PACKET 3
 #define EVENT_PACKET_FOR_PHONE 4
-#define EVENT_RECEIVED_TEXT_MSG 5
+#define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
 #define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen

src/graphics/Screen.cpp

@@ -404,6 +404,43 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
 }
 
+/// Draw the last waypoint we received
+static void drawWaypointFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    static char tempBuf[237];
+
+    meshtastic_MeshPacket &mp = devicestate.rx_waypoint;
+    meshtastic_NodeInfo *node = nodeDB.getNode(getFrom(&mp));
+
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
+        display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+        display->setColor(BLACK);
+    }
+
+    uint32_t seconds = sinceReceived(&mp);
+    uint32_t minutes = seconds / 60;
+    uint32_t hours = minutes / 60;
+    uint32_t days = hours / 24;
+
+    if (config.display.heading_bold) {
+        display->drawStringf(1 + x, 0 + y, tempBuf, "%s ago from %s",
+                             screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                             (node && node->has_user) ? node->user.short_name : "???");
+    }
+    display->drawStringf(0 + x, 0 + y, tempBuf, "%s ago from %s", screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                         (node && node->has_user) ? node->user.short_name : "???");
+
+    display->setColor(WHITE);
+    meshtastic_Waypoint scratch;
+    memset(&scratch, 0, sizeof(scratch));
+    if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, &meshtastic_Waypoint_msg, &scratch)) {
+        snprintf(tempBuf, sizeof(tempBuf), "Received waypoint: %s", scratch.name);
+        display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
+    }
+}
+
 /// Draw a series of fields in a column, wrapping to multiple colums if needed
 static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
 {
@@ -1232,6 +1269,10 @@ void Screen::setFrames()
     if (devicestate.has_rx_text_message && shouldDrawMessage(&devicestate.rx_text_message)) {
         normalFrames[numframes++] = drawTextMessageFrame;
     }
+    // If we have a waypoint - show it next, unless it's a phone message and we aren't using any special modules
+    if (devicestate.has_rx_waypoint && shouldDrawMessage(&devicestate.rx_waypoint)) {
+        normalFrames[numframes++] = drawWaypointFrame;
+    }
 
     // then all the nodes
     // We only show a few nodes in our scrolling list - because meshes with many nodes would have too many screens

src/main.cpp

@@ -218,10 +218,10 @@ void setup()
 
     // If the button is connected to GPIO 12, don't enable the ability to use
     // meshtasticAdmin on the device.
-    pinMode(BUTTON_PIN, INPUT);
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT);
 
 #ifdef BUTTON_NEED_PULLUP
-    gpio_pullup_en((gpio_num_t)BUTTON_PIN);
+    gpio_pullup_en((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
     delay(10);
 #endif
 
@@ -389,10 +389,7 @@ void setup()
     // scanEInkDevice();
 #endif
 
-#if HAS_BUTTON
-    // Buttons & LED
-    buttonThread = new ButtonThread();
-#endif
+    // LED init
 
 #ifdef LED_PIN
     pinMode(LED_PIN, OUTPUT);
@@ -417,6 +414,11 @@ void setup()
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER)
         router = new FloodingRouter();
 
+#if HAS_BUTTON
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    buttonThread = new ButtonThread();
+#endif
+
     playStartMelody();
 
     // fixed screen override?

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -56,6 +56,11 @@ typedef struct _meshtastic_DeviceState {
     bool no_save;
     /* Some GPS receivers seem to have bogus settings from the factory, so we always do one factory reset. */
     bool did_gps_reset;
+    /* We keep the last received waypoint stored in the device flash,
+ so we can show it on the screen.
+ Might be null */
+    bool has_rx_waypoint;
+    meshtastic_MeshPacket rx_waypoint;
 } meshtastic_DeviceState;
 
 /* The on-disk saved channels */
@@ -110,10 +115,10 @@ extern "C" {
 
 
 /* Initializer values for message structs */
-#define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default}, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0}
+#define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default, meshtastic_NodeInfo_init_default}, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default}
 #define meshtastic_ChannelFile_init_default      {0, {meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default}, 0}
 #define meshtastic_OEMStore_init_default         {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_default, false, meshtastic_LocalModuleConfig_init_default}
-#define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero}, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0}
+#define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero, meshtastic_NodeInfo_init_zero}, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero}
 #define meshtastic_ChannelFile_init_zero         {0, {meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero}, 0}
 #define meshtastic_OEMStore_init_zero            {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_zero, false, meshtastic_LocalModuleConfig_init_zero}
 
@@ -126,6 +131,7 @@ extern "C" {
 #define meshtastic_DeviceState_version_tag       8
 #define meshtastic_DeviceState_no_save_tag       9
 #define meshtastic_DeviceState_did_gps_reset_tag 11
+#define meshtastic_DeviceState_rx_waypoint_tag   12
 #define meshtastic_ChannelFile_channels_tag      1
 #define meshtastic_ChannelFile_version_tag       2
 #define meshtastic_OEMStore_oem_icon_width_tag   1
@@ -146,7 +152,8 @@ X(a, STATIC,   REPEATED, MESSAGE,  receive_queue,     5) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  rx_text_message,   7) \
 X(a, STATIC,   SINGULAR, UINT32,   version,           8) \
 X(a, STATIC,   SINGULAR, BOOL,     no_save,           9) \
-X(a, STATIC,   SINGULAR, BOOL,     did_gps_reset,    11)
+X(a, STATIC,   SINGULAR, BOOL,     did_gps_reset,    11) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  rx_waypoint,      12)
 #define meshtastic_DeviceState_CALLBACK NULL
 #define meshtastic_DeviceState_DEFAULT NULL
 #define meshtastic_DeviceState_my_node_MSGTYPE meshtastic_MyNodeInfo
@@ -154,6 +161,7 @@ X(a, STATIC,   SINGULAR, BOOL,     did_gps_reset,    11)
 #define meshtastic_DeviceState_node_db_MSGTYPE meshtastic_NodeInfo
 #define meshtastic_DeviceState_receive_queue_MSGTYPE meshtastic_MeshPacket
 #define meshtastic_DeviceState_rx_text_message_MSGTYPE meshtastic_MeshPacket
+#define meshtastic_DeviceState_rx_waypoint_MSGTYPE meshtastic_MeshPacket
 
 #define meshtastic_ChannelFile_FIELDLIST(X, a) \
 X(a, STATIC,   REPEATED, MESSAGE,  channels,          1) \
@@ -187,7 +195,7 @@ extern const pb_msgdesc_t meshtastic_OEMStore_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define meshtastic_ChannelFile_size              638
-#define meshtastic_DeviceState_size              22040
+#define meshtastic_DeviceState_size              22364
 #define meshtastic_OEMStore_size                 3041
 
 #ifdef __cplusplus

src/modules/AdminModule.cpp

@@ -39,9 +39,9 @@ static void writeSecret(char *buf, size_t bufsz, const char *currentVal)
 }
 
 /**
- * @brief Handle recieved protobuf message
+ * @brief Handle received protobuf message
  *
- * @param mp Recieved MeshPacket
+ * @param mp Received MeshPacket
  * @param r Decoded AdminMessage
  * @return bool
  */

src/modules/Telemetry/Sensor/BME680Sensor.cpp

@@ -1,18 +1,26 @@
 #include "BME680Sensor.h"
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "FSCommon.h"
 #include "TelemetrySensor.h"
 #include "configuration.h"
-#include <Adafruit_BME680.h>
 
 BME680Sensor::BME680Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_BME680, "BME680") {}
 
 int32_t BME680Sensor::runOnce()
 {
-    LOG_INFO("Init sensor: %s\n", sensorName);
+    LOG_INFO("Init sensor: %s with the BSEC Library\n", sensorName);
     if (!hasSensor()) {
         return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
     }
-    status = bme680.begin(nodeTelemetrySensorsMap[sensorType]);
+    bme680.begin(nodeTelemetrySensorsMap[sensorType], Wire);
+    if (bme680.bsecStatus == BSEC_OK) {
+        bme680.setConfig(bsec_config_iaq);
+        loadState();
+        bme680.updateSubscription(sensorList, 13, BSEC_SAMPLE_RATE_LP);
+        status = 1;
+    } else {
+        status = 0;
+    }
 
     return initI2CSensor();
 }
@@ -21,11 +29,76 @@ void BME680Sensor::setup() {}
 
 bool BME680Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
-    bme680.performReading();
+    bme680.run();
     measurement->variant.environment_metrics.temperature = bme680.temperature;
     measurement->variant.environment_metrics.relative_humidity = bme680.humidity;
     measurement->variant.environment_metrics.barometric_pressure = bme680.pressure / 100.0F;
-    measurement->variant.environment_metrics.gas_resistance = bme680.gas_resistance / 1000.0;
-
+    measurement->variant.environment_metrics.gas_resistance = bme680.gasResistance / 1000.0;
+    // Check if we need to save state to filesystem (every STATE_SAVE_PERIOD ms)
+    updateState();
     return true;
+}
+
+void BME680Sensor::loadState()
+{
+#ifdef FSCom
+    auto file = FSCom.open(bsecConfigFileName, FILE_O_READ);
+    if (file) {
+        file.read((uint8_t *)&bsecState, BSEC_MAX_STATE_BLOB_SIZE);
+        file.close();
+        bme680.setState(bsecState);
+        LOG_INFO("%s state read from %s.\n", sensorName, bsecConfigFileName);
+    } else {
+        LOG_INFO("No %s state found (File: %s).\n", sensorName, bsecConfigFileName);
+    }
+#else
+    LOG_ERROR("ERROR: Filesystem not implemented\n");
+#endif
+}
+
+void BME680Sensor::updateState()
+{
+#ifdef FSCom
+    bool update = false;
+    if (stateUpdateCounter == 0) {
+        /* First state update when IAQ accuracy is >= 3 */
+        if (bme680.iaqAccuracy >= 3) {
+            LOG_DEBUG("%s state update IAQ accuracy %u >= 3\n", sensorName, bme680.iaqAccuracy);
+            update = true;
+            stateUpdateCounter++;
+        } else {
+            LOG_DEBUG("%s not updated, IAQ accuracy is %u >= 3\n", sensorName, bme680.iaqAccuracy);
+        }
+    } else {
+        /* Update every STATE_SAVE_PERIOD minutes */
+        if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) {
+            LOG_DEBUG("%s state update every %d minutes\n", sensorName, STATE_SAVE_PERIOD);
+            update = true;
+            stateUpdateCounter++;
+        }
+    }
+
+    if (update) {
+        bme680.getState(bsecState);
+        std::string filenameTmp = bsecConfigFileName;
+        filenameTmp += ".tmp";
+        auto file = FSCom.open(bsecConfigFileName, FILE_O_WRITE);
+        if (file) {
+            LOG_INFO("%s state write to %s.\n", sensorName, bsecConfigFileName);
+            file.write((uint8_t *)&bsecState, BSEC_MAX_STATE_BLOB_SIZE);
+            file.flush();
+            file.close();
+            // brief window of risk here ;-)
+            if (FSCom.exists(bsecConfigFileName) && !FSCom.remove(bsecConfigFileName))
+                LOG_WARN("Can't remove old state file\n");
+            if (!renameFile(filenameTmp.c_str(), bsecConfigFileName))
+                LOG_ERROR("Error: can't rename new state file\n");
+
+        } else {
+            LOG_INFO("Can't write %s state (File: %s).\n", sensorName, bsecConfigFileName);
+        }
+    }
+#else
+    LOG_ERROR("ERROR: Filesystem not implemented\n");
+#endif
 }

src/modules/Telemetry/Sensor/BME680Sensor.h

@@ -1,14 +1,38 @@
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
-#include <Adafruit_BME680.h>
+#include <bsec.h>
+
+#define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // That's 6 hours worth of millis()
+
+const uint8_t bsec_config_iaq[] = {
+#include <config/generic_33v_3s_4d/bsec_iaq.txt>
+};
 
 class BME680Sensor : virtual public TelemetrySensor
 {
   private:
-    Adafruit_BME680 bme680;
+    Bsec bme680;
 
   protected:
     virtual void setup() override;
+    const char *bsecConfigFileName = "/prefs/bsec.dat";
+    uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
+    uint16_t stateUpdateCounter = 0;
+    bsec_virtual_sensor_t sensorList[13] = {BSEC_OUTPUT_IAQ,
+                                            BSEC_OUTPUT_STATIC_IAQ,
+                                            BSEC_OUTPUT_CO2_EQUIVALENT,
+                                            BSEC_OUTPUT_BREATH_VOC_EQUIVALENT,
+                                            BSEC_OUTPUT_RAW_TEMPERATURE,
+                                            BSEC_OUTPUT_RAW_PRESSURE,
+                                            BSEC_OUTPUT_RAW_HUMIDITY,
+                                            BSEC_OUTPUT_RAW_GAS,
+                                            BSEC_OUTPUT_STABILIZATION_STATUS,
+                                            BSEC_OUTPUT_RUN_IN_STATUS,
+                                            BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
+                                            BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
+                                            BSEC_OUTPUT_GAS_PERCENTAGE};
+    void loadState();
+    void updateState();
 
   public:
     BME680Sensor();

src/modules/TextMessageModule.cpp

@@ -15,7 +15,7 @@ ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp
     devicestate.rx_text_message = mp;
     devicestate.has_rx_text_message = true;
 
-    powerFSM.trigger(EVENT_RECEIVED_TEXT_MSG);
+    powerFSM.trigger(EVENT_RECEIVED_MSG);
     notifyObservers(&mp);
 
     return ProcessMessage::CONTINUE; // Let others look at this message also if they want

src/modules/WaypointModule.cpp

@@ -10,6 +10,12 @@ ProcessMessage WaypointModule::handleReceived(const meshtastic_MeshPacket &mp)
     auto &p = mp.decoded;
     LOG_INFO("Received waypoint msg from=0x%0x, id=0x%x, msg=%.*s\n", mp.from, mp.id, p.payload.size, p.payload.bytes);
 
+    // We only store/display messages destined for us.
+    // Keep a copy of the most recent text message.
+    devicestate.rx_waypoint = mp;
+    devicestate.has_rx_waypoint = true;
+
+    powerFSM.trigger(EVENT_RECEIVED_MSG);
     notifyObservers(&mp);
 
     return ProcessMessage::CONTINUE; // Let others look at this message also if they want

src/platform/esp32/main-esp32.cpp

@@ -202,7 +202,7 @@ void cpuDeepSleep(uint32_t msecToWake)
 #ifdef BUTTON_PIN
     // Only GPIOs which are have RTC functionality can be used in this bit map: 0,2,4,12-15,25-27,32-39.
 #if SOC_RTCIO_HOLD_SUPPORTED
-    uint64_t gpioMask = (1ULL << BUTTON_PIN);
+    uint64_t gpioMask = (1ULL << config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #endif
 
 #ifdef BUTTON_NEED_PULLUP

src/sleep.cpp

@@ -309,7 +309,8 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     // assert(esp_sleep_enable_uart_wakeup(0) == ESP_OK);
 #endif
 #ifdef BUTTON_PIN
-    esp_sleep_enable_ext0_wakeup((gpio_num_t)BUTTON_PIN, LOW); // when user presses, this button goes low
+    esp_sleep_enable_ext0_wakeup((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN),
+                                 LOW); // when user presses, this button goes low
 #endif
 #if defined(LORA_DIO1) && (LORA_DIO1 != RADIOLIB_NC)
     gpio_wakeup_enable((gpio_num_t)LORA_DIO1, GPIO_INTR_HIGH_LEVEL); // SX126x/SX128x interrupt, active high
@@ -338,7 +339,8 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
 #ifdef BUTTON_PIN
     if (cause == ESP_SLEEP_WAKEUP_GPIO)
-        LOG_INFO("Exit light sleep gpio: btn=%d\n", !digitalRead(BUTTON_PIN));
+        LOG_INFO("Exit light sleep gpio: btn=%d\n",
+                 !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
 #endif
 
     return cause;

variants/bpi_picow_esp32_s3/pins_arduino.h

@@ -0,0 +1,37 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS 48
+#define NUM_ANALOG_INPUTS 20
+
+#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
+#define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
+#define digitalPinHasPWM(p) (p < 46)
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 12;
+static const uint8_t SCL = 14;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 39;
+static const uint8_t SCK = 21;
+static const uint8_t MOSI = 38;
+static const uint8_t SS = 17;
+
+//#define SPI_MOSI                    (11)
+//#define SPI_SCK                     (14)
+//#define SPI_MISO                    (2)
+//#define SPI_CS                      (13)
+
+//#define SDCARD_CS                   SPI_CS
+
+#endif /* Pins_Arduino_h */

variants/bpi_picow_esp32_s3/platformio.ini

@@ -0,0 +1,14 @@
+[env:bpi_picow_esp32_s3]
+extends = esp32s3_base
+board = bpi_picow_esp32_s3
+board_level = extra
+;OpenOCD flash method
+;upload_protocol = esp-builtin
+;Normal method
+upload_protocol = esptool
+upload_port = /dev/ttyACM2
+lib_deps =
+  ${esp32_base.lib_deps}
+  caveman99/ESP32 Codec2@^1.0.1
+build_flags = 
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/bpi_picow_esp32_s3

variants/bpi_picow_esp32_s3/variant.h

@@ -0,0 +1,73 @@
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+//#define HAS_SCREEN 0
+
+//#define HAS_SDCARD
+//#define SDCARD_USE_SPI1
+
+#define USE_SSD1306
+#define I2C_SDA 12
+#define I2C_SCL 14
+
+#define LED_PIN 46
+#define LED_STATE_ON 0 // State when LED is litted
+
+//#define BUTTON_PIN 15 // Pico OLED 1.3 User key 0 - removed User key 1 (17)
+
+#define BUTTON_PIN 40
+//#define BUTTON_PIN 0 // This is the BOOT button pad at the moment
+//#define BUTTON_NEED_PULLUP
+
+//#define USE_RF95   // RFM95/SX127x
+
+#undef RF95_SCK
+#undef RF95_MISO
+#undef RF95_MOSI
+#undef RF95_NSS
+
+// WaveShare Core1262-868M OK
+// https://www.waveshare.com/wiki/Core1262-868M
+#define USE_SX1262
+
+#ifdef USE_SX1262
+#define RF95_MISO 39
+#define RF95_SCK 21
+#define RF95_MOSI 38
+#define RF95_NSS 17
+#define LORA_RESET 42
+#define LORA_DIO1 5
+#define LORA_BUSY 47
+#define SX126X_CS RF95_NSS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_BUSY
+#define SX126X_RESET LORA_RESET
+#define SX126X_E22
+#endif
+
+//#define USE_SX1280
+#ifdef USE_SX1280
+#define RF95_MISO 1
+#define RF95_SCK 3
+#define RF95_MOSI 4
+#define RF95_NSS 2
+#define LORA_RESET 17
+#define LORA_DIO1 12
+#define LORA_BUSY 47
+#define SX128X_CS RF95_NSS
+#define SX128X_DIO1 LORA_DIO1
+#define SX128X_BUSY LORA_BUSY
+#define SX128X_RESET LORA_RESET
+#endif
+
+//#define USE_EINK
+/*
+ * eink display pins
+ */
+//#define PIN_EINK_CS
+//#define PIN_EINK_BUSY
+//#define PIN_EINK_DC
+//#define PIN_EINK_RES    (-1)
+//#define PIN_EINK_SCLK   3
+//#define PIN_EINK_MOSI   4

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 1
-build = 9
+build = 10