Triple GPS state (#3157)

* Triple state GPS refactoring

* Skip probe

* Move GPS toggle into the GPSThread

* Consolidate

* make all happy (including me)

* corrected screen texts

* NOT_PRESENT guard in main.cpp

---------

Co-authored-by: mverch67 <manuel.verch@gmx.de>

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -37,13 +37,19 @@ body:
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
         - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/actions/setup-base/action.yml

@@ -16,6 +16,19 @@ runs:
       run: |
         sudo apt-get install -y cppcheck
 
+    - name: Install libbluetooth
+      shell: bash
+      run: |
+        sudo apt-get install -y libbluetooth-dev
+    - name: Install libgpiod
+      shell: bash
+      run: |
+        sudo apt-get install -y libgpiod-dev
+    - name: Install libyaml-cpp
+      shell: bash
+      run: |
+        sudo apt-get install -y libyaml-cpp-dev
+
     - name: Setup Python
       uses: actions/setup-python@v4
       with:

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -40,11 +40,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_esp32_s3.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -38,11 +38,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware-s3.bin"
-          target: "release/bleota-s3.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_raspbian.yml

@@ -0,0 +1,45 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_aarch64
+            bin/config-dist.yaml

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -23,9 +26,9 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2-1-1.6
+          - board: tlora-v2-1-1_6
           - board: tbeam
-          - board: heltec-v2.1
+          - board: heltec-v2_1
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
@@ -33,6 +36,9 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          #- board: rak11310
 
     runs-on: ubuntu-latest
     steps:
@@ -43,7 +49,7 @@ jobs:
 
       - name: Trunk Check
         if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -57,20 +63,24 @@ jobs:
           - board: tlora-v2
           - board: tlora-v1
           - board: tlora_v1_3
-          - board: tlora-v2-1-1.6
-          - board: tlora-v2-1-1.8
+          - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_6-tcxo
+          - board: tlora-v2-1-1_8
           - board: tbeam
+          - board: heltec-ht62-esp32c3-sx1262
           - board: heltec-v1
-          - board: heltec-v2.0
-          - board: heltec-v2.1
-          - board: tbeam0.7
+          - board: heltec-v2_0
+          - board: heltec-v2_1
+          - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           - board: nano-g1-explorer
+          - board: chatter2
     uses: ./.github/workflows/build_esp32.yml
     with:
       board: ${{ matrix.board }}
@@ -82,8 +92,13 @@ jobs:
         include:
           - board: heltec-v3
           - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-paper
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          - board: picomputer-s3
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
@@ -91,28 +106,40 @@ jobs:
   build-nrf52:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
 
-  # build-rpi2040:
-  #   strategy:
-  #     fail-fast: false
-  #     max-parallel: 2
-  #     matrix:
-  #       include:
-  #         - board: pico
-  #   uses: ./.github/workflows/build_rpi2040.yml
-  #   with:
-  #     board: ${{ matrix.board }}
+  build-rpi2040:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: pico
+          - board: picow
+          - board: rak11310
+          - board: senselora_rp2040
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-raspbian:
+    strategy:
+      fail-fast: false
+      max-parallel: 1
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml
 
   build-native:
     runs-on: ubuntu-latest
@@ -148,12 +175,14 @@ jobs:
             release/device-*.bat
 
       - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
       - name: Docker build and push tagged versions
@@ -166,7 +195,7 @@ jobs:
           tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
 
       - name: Docker build and push
-        if: github.ref == 'refs/heads/master'
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/build-push-action@v3
         with:
           context: .
@@ -185,8 +214,20 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
   gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-esp32-s3, build-nrf52, build-native] #, build-rpi2040]
+    needs:
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-nrf52,
+        build-raspbian,
+        build-native,
+        build-rpi2040,
+        package-raspbian,
+      ]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -198,12 +239,15 @@ jobs:
         with:
           path: ./
 
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase_v2.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_aarch64 ./firmware-raspbian-*/bin/config-dist.yaml
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -215,6 +259,8 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_arm64
+            ./config-dist.yaml
           retention-days: 90
 
       - uses: actions/download-artifact@v3
@@ -242,15 +288,15 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
           artifacts-repo: meshtastic/artifacts
           artifacts-branch: device
-          artifacts-dir: pr
           artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
@@ -275,6 +321,13 @@ jobs:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
 
+      - uses: actions/download-artifact@v3
+        with:
+          name: artifact-deb
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -301,7 +354,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
@@ -328,6 +381,16 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - name: Add raspbian .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py

.github/workflows/nightly.yml

@@ -14,6 +14,6 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}

.github/workflows/package_raspbian.yml

@@ -0,0 +1,62 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact-deb
+          path: |
+            ./*.deb

.github/workflows/trunk-check.yml

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1

.gitignore

@@ -30,3 +30,4 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
+/compile_commands.json

.trunk/.gitignore

@@ -2,6 +2,7 @@
 *logs
 *actions
 *notifications
+*tools
 plugins
 user_trunk.yaml
 user.yaml

.trunk/configs/.shellcheckrc

@@ -1,7 +1,10 @@
 enable=all
 source-path=SCRIPTDIR
 disable=SC2154
+disable=SC2248
+disable=SC2250
 
 # If you're having issues with shellcheck following source, disable the errors via:
 # disable=SC1090
 # disable=SC1091
+# 

.trunk/configs/.yamllint.yaml

@@ -3,7 +3,7 @@ rules:
     required: only-when-needed
     extra-allowed: ["{|}"]
   empty-values:
-    forbid-in-block-mappings: true
+    forbid-in-block-mappings: false
     forbid-in-flow-mappings: true
   key-duplicates: {}
   octal-values:

.trunk/trunk.yaml

@@ -1,47 +1,43 @@
 version: 0.1
 cli:
-  version: 1.7.0
+  version: 1.17.2
 plugins:
   sources:
     - id: trunk
-      ref: v0.0.14
+      ref: v1.3.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - ruff@0.0.260
-    - yamllint@1.30.0
+    - bandit@1.7.5
+    - checkov@3.1.9
+    - terrascan@1.18.5
+    - trivy@0.47.0
+    #- trufflehog@3.63.2-rc0
+    - taplo@0.8.1
+    - ruff@0.1.6
     - isort@5.12.0
-    - markdownlint@0.33.0
-    - oxipng@8.0.0
-    - svgo@3.0.2
-    - actionlint@1.6.23
-    - flake8@6.0.0
+    - markdownlint@0.37.0
+    - oxipng@9.0.0
+    - svgo@3.0.5
+    - actionlint@1.6.26
+    - flake8@6.1.0
     - hadolint@2.12.0
-    - shfmt@3.5.0
+    - shfmt@3.6.0
     - shellcheck@0.9.0
-    - black@23.3.0
+    - black@23.9.1
     - git-diff-check
-    - gitleaks@8.16.2
-    - clang-format@14.0.0
-    - prettier@2.8.7
-  disabled:
-    - taplo@0.7.0
-    - shellcheck@0.9.0
-    - shfmt@3.5.0
-    - oxipng@8.0.0
-    - actionlint@1.6.22
-    - markdownlint@0.33.0
-    - hadolint@2.12.0
-    - svgo@3.0.2
+    - gitleaks@8.18.1
+    - clang-format@16.0.3
+    - prettier@3.1.0
 runtimes:
   enabled:
     - python@3.10.8
-    - go@1.19.5
+    - go@1.21.0
     - node@18.12.1
 actions:
   disabled:
     - trunk-announce
-    - trunk-check-pre-push
-    - trunk-fmt-pre-commit
   enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
     - trunk-upgrade-available

.vscode/extensions.json

@@ -6,4 +6,4 @@
         "platformio.platformio-ide",
         "trunk.io"
     ],
-}
+}

.vscode/settings.json

@@ -1,4 +1,5 @@
 {
   "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true
 }

Dockerfile

@@ -12,7 +12,7 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 # Install build deps
 USER root
 RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
+	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev
 
 # create a non-priveleged user & group
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
@@ -27,15 +27,15 @@ RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/
 	source ~/.platformio/penv/bin/activate && \
 	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc
+FROM frolvlad/alpine-glibc:glibc-2.31
 
 RUN apk --update add --no-cache g++ shadow && \
 	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
 
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
+COPY --from=builder /tmp/firmware/release/meshtasticd_linux_x86_64 /home/mesh/
 
 USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+CMD sh -cx "./meshtasticd_linux_x86_64 --hwid '${HWID:-$RANDOM}'"
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -10,8 +10,8 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 

arch/esp32/esp32.ini

@@ -1,12 +1,15 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^6.1.0
+platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
+
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
+
 board_build.filesystem = littlefs
 
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@@ -25,7 +28,12 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
   ;-DDEBUG_HEAP
 
 lib_deps =
@@ -33,7 +41,8 @@ lib_deps =
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
+  h2zero/NimBLE-Arduino@^1.4.1
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 
@@ -51,4 +60,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -1,44 +1,5 @@
 [esp32c3_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
 monitor_filters = esp32_c3_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  ;-DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv

arch/esp32/esp32s2.ini

@@ -1,47 +1,16 @@
 [esp32s2_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
+extends = esp32_base
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
-upload_speed = 961200
+  ${esp32_base.build_src_filter} -<nimble/>
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
 
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
-  ;-DDEBUG_HEAP
   
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-
 lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
 

arch/esp32/esp32s3.ini

@@ -1,47 +1,5 @@
 [esp32s3_base]
-extends = arduino_base
-platform = platformio/espressif32@^6.1.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  ;-DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
 

arch/nrf52/nrf52.ini

@@ -1,18 +1,20 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.5.0
-
+platform = platformio/nordicnrf52@^10.1.0
 extends = arduino_base
+
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
   -Isrc/platform/nrf52
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+
 lib_ignore =
-  BluetoothOTA
-  
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832  
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,14 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
+
 build_flags = ${nrf52_base.build_flags} 
+
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-

arch/portduino/portduino.ini

@@ -1,7 +1,8 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#a28dd5a9ccd5c48a9bede46037855ff83915d74b
 framework = arduino
+
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -9,6 +10,7 @@ build_src_filter =
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
   -<platform/rp2040>
+  -<mesh/wifi/>
   -<mesh/http/>
   -<mesh/eth/>
   -<modules/esp32>
@@ -16,8 +18,19 @@ build_src_filter =
   -<modules/Telemetry/AirQualityTelemetry.cpp>
   -<modules/Telemetry/Sensor>
   +<../variants/portduino>
+
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-build_flags = ${arduino_base.build_flags} -fPIC -Isrc/platform/portduino
+  lovyan03/LovyanGFX@^1.1.12
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -1,7 +1,9 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9f8c10e50b5acd18e7bfd32638199c655be73a5b
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#612de5399d68b359053f1307ed223d400aea975c
 extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.6.2
+
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
@@ -10,10 +12,12 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/>
+
 lib_ignore =
   BluetoothOTA
+
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  rweather/Crypto

arch/stm32/stm32wl5e.ini

@@ -1,18 +1,28 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
+
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
-  -DHAL_SUBGHZ_MODULE_ENABLED
-#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
-#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
 lib_deps =
   ${env.lib_deps}
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-lib_ignore = 
-  mathertel/OneButton@^2.0.3
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  mathertel/OneButton

bin/build-native.sh

@@ -2,8 +2,8 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
 
 OUTDIR=release/
 
@@ -13,11 +13,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
-
+platformio pkg update
 pio run --environment native
-cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
-
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(arch)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
-

bin/check-all.sh

@@ -4,23 +4,23 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
+VERSION=$(bin/buildinfo.py long)
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 if [[ $# -gt 0 ]]; then
-    # can override which environment by passing arg
-    BOARDS="$@"
+	# can override which environment by passing arg
+	BOARDS="$@"
 else
-    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
 fi
 
 echo "BOARDS:${BOARDS}"
 
 CHECK=""
 for BOARD in $BOARDS; do
-     CHECK="${CHECK} -e ${BOARD}"
+	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -0,0 +1,107 @@
+### Define your devices here using Broadcom pin numbering
+### Uncomment the block that corresponds to your hardware
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+#  Module: sx1280  # SX1280
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+### Set gpio chip to use in /dev/. Defaults to 0.
+### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
+### Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+### Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0
+
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
+### Set up SPI displays here. Note that I2C displays are generally auto-detected.
+
+Display:
+
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+Touchscreen:
+#  Module: XPT2046
+#  CS: 7
+#  IRQ: 17
+
+### Configure device for direct keyboard input
+
+Input:
+#  KeyboardDevice: /dev/input/event0
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error

bin/device-install.bat

@@ -32,7 +32,7 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% (
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
 	) else (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin

bin/device-install.sh

@@ -50,7 +50,7 @@ if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ]; then
+	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
 		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
 	else
 	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin

bin/exception_decoder.py

@@ -11,19 +11,22 @@ Meshtastic notes:
 * version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
   which adds in ESP32 Backtrace decoding.
 * this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+* also updated the toolchain name, which will be set according to the platform
 
 To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
 $ bin/exception_decoder.py backtrace.txt
+For a platform other than ESP32, use the -p option, e.g.:
+$ bin/exception_decoder.py -p ESP32S3 backtrace.txt
+To specify a specific .elf file, use the -e option, e.g.:
+$ bin/exception_decoder.py -e firmware.elf backtrace.txt
 """
 
 import argparse
+import os
 import re
 import subprocess
-from collections import namedtuple
-
 import sys
-
-import os
+from collections import namedtuple
 
 EXCEPTIONS = [
     "Illegal instruction",
@@ -55,24 +58,39 @@ EXCEPTIONS = [
     "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
     "reserved",
     "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
-    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores",
 ]
 
 PLATFORMS = {
-    "ESP8266": "lx106",
-    "ESP32": "esp32"
+    "ESP8266": "xtensa-lx106",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
+}
+TOOLS = {
+    "ESP8266": "xtensa",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
 }
 
-BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+BACKTRACE_REGEX = re.compile(
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+)
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
-COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
-                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+COUNTER_REGEX = re.compile(
+    "^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) "
+    "excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$"
+)
 CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
-POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
-STACK_BEGIN = '>>>stack>>>'
-STACK_END = '<<<stack<<<'
+POINTER_REGEX = re.compile(
+    "^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$"
+)
+STACK_BEGIN = ">>>stack>>>"
+STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+)
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
 
@@ -96,15 +114,18 @@ class ExceptionDataParser(object):
         self.stack = []
 
     def _parse_backtrace(self, line):
-        if line.startswith('Backtrace:'):
-            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+        if line.startswith("Backtrace:"):
+            self.stack = [
+                StackLine(offset=0, content=(addr,))
+                for addr in BACKTRACE_REGEX.findall(line)
+            ]
             return None
         return self._parse_backtrace
 
     def _parse_exception(self, line):
         match = EXCEPTION_REGEX.match(line)
         if match is not None:
-            self.exception = int(match.group('exc'))
+            self.exception = int(match.group("exc"))
             return self._parse_counters
         return self._parse_exception
 
@@ -144,14 +165,22 @@ class ExceptionDataParser(object):
         if line != STACK_END:
             match = STACK_REGEX.match(line)
             if match is not None:
-                self.stack.append(StackLine(offset=match.group("off"),
-                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
-                                                     match.group("c4"))))
+                self.stack.append(
+                    StackLine(
+                        offset=match.group("off"),
+                        content=(
+                            match.group("c1"),
+                            match.group("c2"),
+                            match.group("c3"),
+                            match.group("c4"),
+                        ),
+                    )
+                )
             return self._parse_stack_line
         return None
 
     def parse_file(self, file, platform, stack_only=False):
-        if platform == 'ESP32':
+        if platform != "ESP8266":
             func = self._parse_backtrace
         else:
             func = self._parse_exception
@@ -175,7 +204,9 @@ class AddressResolver(object):
         self._address_map = {}
 
     def _lookup(self, addresses):
-        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [
+            addr for addr in addresses if addr is not None
+        ]
 
         if sys.version_info[0] < 3:
             output = subprocess.check_output(cmd)
@@ -190,19 +221,27 @@ class AddressResolver(object):
             match = line_regex.match(line)
 
             if match is None:
-                if last is not None and line.startswith('(inlined by)'):
-                    line = line [12:].strip()
-                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                if last is not None and line.startswith("(inlined by)"):
+                    line = line[12:].strip()
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
-            if match.group("result") == '?? ??:0':
+            if match.group("result") == "?? ??:0":
                 continue
 
             self._address_map[match.group("addr")] = match.group("result")
             last = match.group("addr")
 
     def fill(self, parser):
-        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        addresses = [
+            parser.epc1,
+            parser.epc2,
+            parser.epc3,
+            parser.excvaddr,
+            parser.sp,
+            parser.end,
+            parser.offset,
+        ]
         for line in parser.stack:
             addresses.extend(line.content)
 
@@ -257,8 +296,10 @@ def print_stack(lines, resolver):
 
 
 def print_result(parser, resolver, platform, full=True, stack_only=False):
-    if platform == 'ESP8266' and not stack_only:
-        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+    if platform == "ESP8266" and not stack_only:
+        print(
+            "Exception: {} ({})".format(parser.exception, EXCEPTIONS[parser.exception])
+        )
 
         print("")
         print_addr("epc1", parser.epc1, resolver)
@@ -285,15 +326,33 @@ def print_result(parser, resolver, platform, full=True, stack_only=False):
 def parse_args():
     parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")
 
-    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
-                        default="ESP32")
-    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
-                        default="~/.platformio/packages/toolchain-xtensa32/")
-    parser.add_argument("-e", "--elf", help="path to elf file",
-                        default=".pio/build/esp32/firmware.elf")
-    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
-    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
-    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+    parser.add_argument(
+        "-p",
+        "--platform",
+        help="The platform to decode from",
+        choices=PLATFORMS.keys(),
+        default="ESP32",
+    )
+    parser.add_argument(
+        "-t",
+        "--tool",
+        help="Path to the toolchain (without specific platform)",
+        default="~/.platformio/packages/toolchain-",
+    )
+    parser.add_argument(
+        "-e", "--elf", help="path to elf file", default=".pio/build/tbeam/firmware.elf"
+    )
+    parser.add_argument(
+        "-f", "--full", help="Print full stack dump", action="store_true"
+    )
+    parser.add_argument(
+        "-s", "--stack_only", help="Decode only a stractrace", action="store_true"
+    )
+    parser.add_argument(
+        "file",
+        help="The file to read the exception data from ('-' for STDIN)",
+        default="-",
+    )
 
     return parser.parse_args()
 
@@ -309,10 +368,12 @@ if __name__ == "__main__":
             sys.exit(1)
         file = open(args.file, "r")
 
-    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
-                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
-    if os.name == 'nt':
-        addr2line += '.exe'
+    addr2line = os.path.join(
+        os.path.abspath(os.path.expanduser(args.tool + TOOLS[args.platform])),
+        "bin/" + PLATFORMS[args.platform] + "-elf-addr2line",
+    )
+    if os.name == "nt":
+        addr2line += ".exe"
     if not os.path.exists(addr2line):
         print("ERROR: addr2line not found (" + addr2line + ")")
 

bin/meshtasticd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Meshtastic Native Daemon
+After=network-online.target
+
+[Service]
+User=root
+Group=root
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target

bin/native-install.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp "release/meshtasticd_linux_$(arch)" /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/generic_wl5e.json

@@ -20,7 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": ["cmsis-dap"]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/t-deck.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -7,7 +7,10 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x002A"]
+    ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "t-echo",

boards/t-watch-s3.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-s3",
+  "vendor": "LilyGo"
+}

boards/tbeam-s3-core.json

@@ -15,7 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tbeam-s3-core"
   },

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

boards/xiao_ble_sense.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

platformio.ini

@@ -7,12 +7,15 @@ default_envs = tbeam
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
-;default_envs = heltec-v2.0
-;default_envs = heltec-v2.1
+;default_envs = heltec-v2_0
+;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
+;default_envs = chatter2
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1.6
+;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
@@ -21,17 +24,19 @@ default_envs = tbeam
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-diy-v1_1
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+;default_envs = rak10701
+;default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
-extra_scripts = bin/platformio-custom.py 
+extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
@@ -39,8 +44,8 @@ extra_scripts = bin/platformio-custom.py
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format 
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
+  -Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
@@ -48,6 +53,7 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_NRF24
   -DRADIOLIB_EXCLUDE_RF69
   -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
   -DRADIOLIB_EXCLUDE_SI443X
   -DRADIOLIB_EXCLUDE_RFM2X
   -DRADIOLIB_EXCLUDE_AFSK
@@ -55,20 +61,24 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306 
-  mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
+  jgromes/RadioLib@^6.4.0
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
+  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
+  https://github.com/meshtastic/TinyGPSPlus.git#2044b2c51e91ab4cd8cc93b15e40658cd808dd06
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
-  ; temp: do this till > 5.7.0 release to keep (some) SX1262 and SX1280 working - resolves -705 error during init
-  https://github.com/jgromes/RadioLib.git#45c5859338590b7eede23cb2f95284c3fb0cf08e
-  ; jgromes/RadioLib@^5.7.0
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -83,35 +93,38 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
+  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
   https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
-build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
+build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
-; Common libs for communicating over TCP/IP networks such as MQTT 
+; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
   arduino-libraries/NTPClient@^3.1.0
   arcao/Syslog@^2.0.0
 
-; Common libs for environmental measurements in telemetry module 
+; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.9
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BME280 Library@^2.2.2
-  https://github.com/meshtastic/BSEC-Arduino-library.git#452f9a7ffa8b53e1debe2c454fe375dfad98b507
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
+  https://github.com/KodinLanewave/INA3221@^1.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
   adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/BMA423_Library@^0.0.1

src/AccelerometerThread.h

@@ -6,16 +6,43 @@
 
 #include <Adafruit_LIS3DH.h>
 #include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <Wire.h>
+#include <bma.h>
+
+BMA423 bmaSensor;
+bool BMA_IRQ = false;
 
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
 namespace concurrency
 {
 class AccelerometerThread : public concurrency::OSThread
 {
   public:
-    AccelerometerThread(ScanI2C::DeviceType type = ScanI2C::DeviceType::NONE) : OSThread("AccelerometerThread")
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
     {
         if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
             LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
@@ -29,10 +56,10 @@ class AccelerometerThread : public concurrency::OSThread
             return;
         }
 
-        accleremoter_type = type;
+        acceleremoter_type = type;
         LOG_DEBUG("AccelerometerThread initializing\n");
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
             LOG_DEBUG("MPU6050 initializing\n");
             // setup motion detection
             mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
@@ -40,11 +67,60 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshhold, higher numbers are less sensitive
+            // Adjust threshold, higher numbers are less sensitive
             lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            Acfg cfg;
+            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
+            cfg.range = BMA4_ACCEL_RANGE_2G;
+            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
+            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
+            bmaSensor.setAccelConfig(cfg);
+            bmaSensor.enableAccel();
+
+            struct bma4_int_pin_config pin_config;
+            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
+            pin_config.lvl = BMA4_ACTIVE_HIGH;
+            pin_config.od = BMA4_PUSH_PULL;
+            pin_config.output_en = BMA4_OUTPUT_ENABLE;
+            pin_config.input_en = BMA4_INPUT_DISABLE;
+            // The correct trigger interrupt needs to be configured as needed
+            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+            struct bma423_axes_remap remap_data;
+            remap_data.x_axis = 0;
+            remap_data.x_axis_sign = 1;
+            remap_data.y_axis = 1;
+            remap_data.y_axis_sign = 0;
+            remap_data.z_axis = 2;
+            remap_data.z_axis_sign = 1;
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setRemapAxes(&remap_data);
+            // sensor.enableFeature(BMA423_STEP_CNTR, true);
+            bmaSensor.enableFeature(BMA423_TILT, true);
+            bmaSensor.enableFeature(BMA423_WAKEUP, true);
+            // sensor.resetStepCounter();
+
+            // Turn on feature interrupt
+            bmaSensor.enableStepCountInterrupt();
+            bmaSensor.enableTiltInterrupt();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupInterrupt();
         }
     }
 
@@ -53,9 +129,9 @@ class AccelerometerThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
                 wakeScreen();
@@ -65,7 +141,13 @@ class AccelerometerThread : public concurrency::OSThread
                 buttonPress();
                 return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+                wakeScreen();
+                return 500;
+            }
         }
+
         return ACCELEROMETER_CHECK_INTERVAL_MS;
     }
 
@@ -84,9 +166,9 @@ class AccelerometerThread : public concurrency::OSThread
         powerFSM.trigger(EVENT_PRESS);
     }
 
-    ScanI2C::DeviceType accleremoter_type;
+    ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/AmbientLightingThread.h

@@ -0,0 +1,75 @@
+#include "configuration.h"
+
+#ifdef HAS_NCP5623
+#include <graphics/RAKled.h>
+NCP5623 rgb;
+#endif
+
+namespace concurrency
+{
+class AmbientLightingThread : public concurrency::OSThread
+{
+  public:
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    {
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
+        // // Default to a color based on our node number
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
+#ifdef HAS_NCP5623
+        _type = type;
+        if (_type == ScanI2C::DeviceType::NONE) {
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            disable();
+            return;
+        }
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            disable();
+            return;
+        }
+        LOG_DEBUG("AmbientLightingThread initializing\n");
+        if (_type == ScanI2C::NCP5623) {
+            rgb.begin();
+            setLighting();
+        }
+#endif
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+            setLighting();
+            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+        } else {
+            return disable();
+        }
+#else
+        return disable();
+#endif
+    }
+
+  private:
+    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+
+    void setLighting()
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+        rgb.setRed(moduleConfig.ambient_lighting.red);
+        rgb.setGreen(moduleConfig.ambient_lighting.green);
+        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+    }
+};
+
+} // namespace concurrency

src/AudioThread.h

@@ -0,0 +1,77 @@
+#pragma once
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "sleep.h"
+
+#ifdef HAS_I2S
+#include <AudioFileSourcePROGMEM.h>
+#include <AudioGeneratorRTTTL.h>
+#include <AudioOutputI2S.h>
+#include <ESP8266SAM.h>
+
+#define AUDIO_THREAD_INTERVAL_MS 100
+
+class AudioThread : public concurrency::OSThread
+{
+  public:
+    AudioThread() : OSThread("AudioThread") { initOutput(); }
+
+    void beginRttl(const void *data, uint32_t len)
+    {
+        setCPUFast(true);
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
+    }
+
+    bool isPlaying()
+    {
+        if (i2sRtttl != nullptr) {
+            return i2sRtttl->isRunning() && i2sRtttl->loop();
+        }
+        return false;
+    }
+
+    void stop()
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
+        }
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
+
+        setCPUFast(false);
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        // if (i2sRtttl != nullptr && i2sRtttl->isRunning()) {
+        //     i2sRtttl->loop();
+        // }
+        return AUDIO_THREAD_INTERVAL_MS;
+    }
+
+  private:
+    void initOutput()
+    {
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetGain(0.2);
+    };
+
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut;
+
+    AudioFileSourcePROGMEM *rtttlFile;
+};
+
+#endif

src/ButtonThread.h

@@ -4,6 +4,8 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "main.h"
+#include "modules/ExternalNotificationModule.h"
 #include "power.h"
 #include <OneButton.h>
 
@@ -35,6 +37,9 @@ class ButtonThread : public concurrency::OSThread
 #endif
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
+#endif
+#if defined(ARCH_PORTDUINO)
+    OneButton userButton;
 #endif
     static bool shutdown_on_long_stop;
 
@@ -44,21 +49,32 @@ class ButtonThread : public concurrency::OSThread
     // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
     ButtonThread() : OSThread("Button")
     {
-#ifdef BUTTON_PIN
+#if defined(ARCH_PORTDUINO) || defined(BUTTON_PIN)
+#if defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            userButton = OneButton(settingsMap[user], true, true);
+#elif defined(BUTTON_PIN)
+
         userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
+#endif
 #ifdef INPUT_PULLUP_SENSE
         // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
         pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
-        userButton.setClickTicks(300);
+        userButton.setClickMs(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
         userButton.attachLongPressStart(userButtonPressedLongStart);
         userButton.attachLongPressStop(userButtonPressedLongStop);
+#if defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            wakeOnIrq(settingsMap[user], FALLING);
+#else
         wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
 #endif
+#endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
 #ifdef INPUT_PULLUP_SENSE
@@ -86,9 +102,14 @@ class ButtonThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN)
         userButton.tick();
         canSleep &= userButton.isIdle();
+#elif defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+            userButton.tick();
+            canSleep &= userButton.isIdle();
+        }
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt.tick();
@@ -98,10 +119,10 @@ class ButtonThread : public concurrency::OSThread
         userButtonTouch.tick();
         canSleep &= userButtonTouch.isIdle();
 #endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
+        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
         // else LOG_DEBUG("sleep ok\n");
 
-        return 5;
+        return 50;
     }
 
   private:
@@ -117,6 +138,14 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN
         if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
              moduleConfig.canned_message.inputbroker_pin_press) ||
+            !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+            !moduleConfig.canned_message.enabled) {
+            powerFSM.trigger(EVENT_PRESS);
+        }
+#endif
+#if defined(ARCH_PORTDUINO)
+        if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
             !moduleConfig.canned_message.enabled) {
             powerFSM.trigger(EVENT_PRESS);
         }
@@ -157,25 +186,25 @@ class ButtonThread : public concurrency::OSThread
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
         screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
+        service.refreshLocalMeshNode();
         service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
     static void userButtonMultiPressed()
     {
-#if defined(GPS_POWER_TOGGLE)
-        if (config.position.gps_enabled) {
-            LOG_DEBUG("Flag set to false for gps power\n");
-        } else {
-            LOG_DEBUG("Flag set to true to restore power\n");
+        if (!config.device.disable_triple_click && (gps != nullptr)) {
+            gps->toggleGpsMode();
         }
-        config.position.gps_enabled = !(config.position.gps_enabled);
-        doGPSpowersave(config.position.gps_enabled);
-#endif
     }
 
     static void userButtonPressedLongStart()
     {
+#ifdef T_DECK
+        // False positive long-press triggered on T-Deck with i2s audio, so short circuit
+        if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
+            return;
+        }
+#endif
         if (millis() > 30 * 1000) {
             LOG_DEBUG("Long press start!\n");
             longPressTime = millis();
@@ -196,4 +225,4 @@ class ButtonThread : public concurrency::OSThread
     }
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/DebugConfiguration.h

@@ -28,6 +28,7 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
+#define DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)

src/DisplayFormatters.cpp

@@ -0,0 +1,34 @@
+#include "DisplayFormatters.h"
+
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        return useShortName ? "ShortS" : "ShortSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        return useShortName ? "ShortF" : "ShortFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        return useShortName ? "MedS" : "MediumSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        return useShortName ? "MedF" : "MediumFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        return useShortName ? "LongS" : "LongSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
+        return useShortName ? "LongF" : "LongFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        return useShortName ? "LongM" : "LongMod";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
+    default:
+        return useShortName ? "Custom" : "Invalid";
+        break;
+    }
+}

src/DisplayFormatters.h

@@ -0,0 +1,8 @@
+#pragma once
+#include "NodeDB.h"
+
+class DisplayFormatters
+{
+  public:
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+};

src/FSCommon.cpp

@@ -1,3 +1,13 @@
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
 #include "configuration.h"
 
@@ -8,10 +18,19 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
 #endif // HAS_SDCARD
 
+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
 bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
@@ -41,6 +60,14 @@ bool copyFile(const char *from, const char *to)
 #endif
 }
 
+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
@@ -57,7 +84,14 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }
 
-void listDir(const char *dirname, uint8_t levels, boolean del = false)
+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -152,6 +186,13 @@ void listDir(const char *dirname, uint8_t levels, boolean del = false)
 #endif
 }
 
+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
@@ -180,6 +221,9 @@ void fsInit()
 #endif
 }
 
+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
@@ -210,4 +254,4 @@ void setupSDCard()
     LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
     LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
-}
+}

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -42,6 +49,6 @@ using namespace Adafruit_LittleFS_Namespace;
 void fsInit();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
-void listDir(const char *dirname, uint8_t levels, boolean del);
+void listDir(const char *dirname, uint8_t levels, bool del);
 void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -55,7 +55,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +68,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,7 +81,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
@@ -106,7 +106,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -138,8 +138,9 @@ class GPSStatus : public Status
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
-            } else
+            } else {
                 LOG_DEBUG("No GPS lock\n");
+            }
             onNewStatus.notifyObservers(this);
         }
         return 0;
@@ -148,4 +149,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/OSTimer.cpp

@@ -5,7 +5,8 @@
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
     (*tCallback)(tParam1, tParam2);
 }
 
+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
     if (!timer) {

src/Observer.h

@@ -10,12 +10,12 @@ template <class T> class Observable;
  */
 template <class T> class Observer
 {
-    std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observables;
 
   public:
     virtual ~Observer();
 
-    /// Stop watching the obserable
+    /// Stop watching the observable
     void unobserve(Observable<T> *o);
 
     /// Start watching a specified observable
@@ -86,21 +86,21 @@ template <class T> class Observable
 
 template <class T> Observer<T>::~Observer()
 {
-    for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
+    for (typename std::list<Observable<T> *>::const_iterator iterator = observables.begin(); iterator != observables.end();
          ++iterator) {
         (*iterator)->removeObserver(this);
     }
-    observed.clear();
+    observables.clear();
 }
 
 template <class T> void Observer<T>::unobserve(Observable<T> *o)
 {
     o->removeObserver(this);
-    observed.remove(o);
+    observables.remove(o);
 }
 
 template <class T> void Observer<T>::observe(Observable<T> *o)
 {
-    observed.push_back(o);
+    observables.push_back(o);
     o->addObserver(this);
-}
+}

src/Power.cpp

@@ -1,11 +1,28 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
+#include "meshUtils.h"
 #include "sleep.h"
-#include "utils.h"
+
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
 
 #ifdef DEBUG_HEAP_MQTT
 #include "mqtt/MQTT.h"
@@ -17,14 +34,41 @@
 #define DELAY_FOREVER portMAX_DELAY
 #endif
 
+#if defined(BATTERY_PIN) && defined(ARCH_ESP32)
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
+static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_1;
+#else // ADC2
+static const adc2_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_2;
+RTC_NOINIT_ATTR uint64_t RTC_reg_b;
+
+#endif // BAT_MEASURE_ADC_UNIT
+
+esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+#ifndef ADC_ATTENUATION
+static const adc_atten_t atten = ADC_ATTEN_DB_11;
+#else
+static const adc_atten_t atten = ADC_ATTENUATION;
+#endif
+#endif // BATTERY_PIN && ARCH_ESP32
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+INA3221Sensor ina3221Sensor;
+#endif
+
 #ifdef HAS_PMU
 #include "XPowersAXP192.tpp"
 #include "XPowersAXP2101.tpp"
 #include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -108,12 +152,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
 
 #ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 30
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    30 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -125,19 +177,19 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
-            // environment.
             uint32_t raw = 0;
+            float scaled = 0;
+
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
+            raw = espAdcRead();
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
-
-            float scaled;
-#ifndef VBAT_RAW_TO_SCALED
-            scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
-#else
-            scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
+            scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
             // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
             last_read_value = scaled;
@@ -145,18 +197,55 @@ class AnalogBatteryLevel : public HasBatteryLevel
         } else {
             return last_read_value;
         }
-#else
+#endif // BATTERY_PIN
         return 0;
-#endif
     }
 
+#if defined(ARCH_ESP32) && !defined(HAS_PMU) && defined(BATTERY_PIN)
+    /**
+     * ESP32 specific function for getting calibrated ADC reads
+     */
+    uint32_t espAdcRead()
+    {
+
+        uint32_t raw = 0;
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL
+        if (heltec_version == 5) {
+            pinMode(ADC_CTRL, OUTPUT);
+            digitalWrite(ADC_CTRL, HIGH);
+            delay(10);
+        }
+#endif
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            raw += adc1_get_raw(adc_channel);
+        }
+#ifdef ADC_CTRL
+        if (heltec_version == 5) {
+            digitalWrite(ADC_CTRL, LOW);
+        }
+#endif
+#else  // ADC2
+        int32_t adc_buf = 0;
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            // ADC2 wifi bug workaround, see
+            // https://github.com/espressif/arduino-esp32/issues/102
+            WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+            SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+            adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            raw += adc_buf;
+        }
+#endif // BAT_MEASURE_ADC_UNIT
+        raw = raw / BATTERY_SENSE_SAMPLES;
+        return raw;
+    }
+#endif
+
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override
-    {
-        return getBatteryPercent() != -1;
-    }
+    virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
@@ -177,10 +266,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
     /// Assume charging if we have a battery and external power is connected.
     /// we can't be smart enough to say 'full'?
-    virtual bool isCharging() override
-    {
-        return isBatteryConnect() && isVbusIn();
-    }
+    virtual bool isCharging() override { return isBatteryConnect() && isVbusIn(); }
 
   private:
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
@@ -203,6 +289,40 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -228,25 +348,52 @@ bool Power::analogInit()
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifdef ARCH_ESP32
-    // ESP32 needs special analog stuff
-    adcAttachPin(BATTERY_PIN);
+#ifndef BATTERY_SENSE_RESOLUTION_BITS
+#define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
+
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+
+#ifndef ADC_WIDTH // max resolution by default
+    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
+#else
+    static const adc_bits_width_t width = ADC_WIDTH;
+#endif
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+    adc1_config_width(width);
+    adc1_config_channel_atten(adc_channel, atten);
+#else // ADC2
+    adc2_config_channel_atten(adc_channel, atten);
+    // ADC2 wifi bug workaround
+    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
+    // calibrate ADC
+    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
+    // show ADC characterization base
+    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+    } else {
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+    }
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
+    pinMode(37, OUTPUT); // needed for P channel mosfet to work
+    digitalWrite(37, LOW);
+#endif
+#endif // ARCH_ESP32
+
 #ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-#endif
-
-#ifndef BATTERY_SENSE_RESOLUTION_BITS
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#endif
-
-    // adcStart(BATTERY_PIN);
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
                                                          // depending on needed resolution.
+
+#endif // ARCH_NRF52
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -254,13 +401,15 @@ bool Power::analogInit()
 #endif
 }
 
+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
-    bool found = axpChipInit();
+    bool found = axpChipInit() || analogInit();
 
-    if (!found) {
-        found = analogInit();
-    }
     enabled = found;
     low_voltage_counter = 0;
 
@@ -289,9 +438,9 @@ void Power::shutdown()
     ledOff(PIN_LED2);
 #endif
 #ifdef PIN_LED3
-    ledOff(PIN_LED2);
+    ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER);
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }
 
@@ -302,7 +451,7 @@ void Power::readPowerStatus()
 {
     if (batteryLevel) {
         bool hasBattery = batteryLevel->isBatteryConnect();
-        int batteryVoltageMv = 0;
+        uint32_t batteryVoltageMv = 0;
         int8_t batteryChargePercent = 0;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
@@ -319,10 +468,25 @@ void Power::readPowerStatus()
             }
         }
 
+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+            NRF_USB = OptFalse;
+        } else {
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+            NRF_USB = OptTrue;
+        }
+#endif
         // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
@@ -365,8 +529,8 @@ void Power::readPowerStatus()
 
 #endif
 
-        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in a
-        // row
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
+        // a row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
@@ -428,10 +592,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -444,10 +610,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the axp192
- share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
- 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -540,82 +706,88 @@ bool Power::axpChipInit()
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
-#if (HW_VENDOR == meshtastic_HardwareModel_TBEAM)
-        // Unuse power channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2);
-        PMU->disablePowerOutput(XPOWERS_DCDC3);
-        PMU->disablePowerOutput(XPOWERS_DCDC4);
-        PMU->disablePowerOutput(XPOWERS_DCDC5);
-        PMU->disablePowerOutput(XPOWERS_ALDO1);
-        PMU->disablePowerOutput(XPOWERS_ALDO4);
-        PMU->disablePowerOutput(XPOWERS_BLDO1);
-        PMU->disablePowerOutput(XPOWERS_BLDO2);
-        PMU->disablePowerOutput(XPOWERS_DLDO1);
-        PMU->disablePowerOutput(XPOWERS_DLDO2);
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // Unuse power channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_ALDO1);
+            PMU->disablePowerOutput(XPOWERS_ALDO4);
+            PMU->disablePowerOutput(XPOWERS_BLDO1);
+            PMU->disablePowerOutput(XPOWERS_BLDO2);
+            PMU->disablePowerOutput(XPOWERS_DLDO1);
+            PMU->disablePowerOutput(XPOWERS_DLDO2);
 
-        // GNSS RTC PowerVDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
-        PMU->enablePowerOutput(XPOWERS_VBACKUP);
+            // GNSS RTC PowerVDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
 
-        // ESP32 VDD 3300mV
-        //  ! No need to set, automatically open , Don't close it
-        //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
-        //  PMU->setProtectedChannel(XPOWERS_DCDC1);
+            // ESP32 VDD 3300mV
+            //  ! No need to set, automatically open , Don't close it
+            //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+            //  PMU->setProtectedChannel(XPOWERS_DCDC1);
 
-        // LoRa VDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // LoRa VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        // GNSS VDD 3300mV
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // GNSS VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+            // t-beam s3 core
+            /**
+             * gnss module power channel
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
 
-#elif (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE)
-        // t-beam s3 core
-        /**
-         * gnss module power channel
-         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO4);
+            // lora radio power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
 
-        // lora radio power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // m.2 interface
+            PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+            PMU->enablePowerOutput(XPOWERS_DCDC3);
 
-        // m.2 interface
-        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-        PMU->enablePowerOutput(XPOWERS_DCDC3);
+            /**
+             * ALDO2 cannot be turned off.
+             * It is a necessary condition for sensor communication.
+             * It must be turned on to properly access the sensor and screen
+             * It is also responsible for the power supply of PCF8563
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        /**
-         * ALDO2 cannot be turned off.
-         * It is a necessary condition for sensor communication.
-         * It must be turned on to properly access the sensor and screen
-         * It is also responsible for the power supply of PCF8563
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // 6-axis , magnetometer ,bme280 , oled screen power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
 
-        // 6-axis , magnetometer ,bme280 , oled screen power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO1);
-
-        // sdcard power channle
-        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_BLDO1);
-
-        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-        // PMU->enablePowerOutput(XPOWERS_DCDC4);
-
-        // not use channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+            // sdcard power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
 
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
 #endif
 
+            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+            // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+            // not use channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        }
+
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 

src/PowerFSM.cpp

@@ -1,5 +1,13 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
-#include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -35,16 +43,16 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_INFO("Enter state: SDS\n");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
+    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_INFO("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -128,16 +136,16 @@ static void lsIdle()
 static void lsExit()
 {
     LOG_INFO("Exit state: LS\n");
-    // setGPSPower(true); // restore GPS power
-    if (gps)
-        gps->forceWake(true);
 }
 
 static void nbEnter()
 {
-    LOG_INFO("Enter state: NB\n");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
+#endif
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -150,7 +158,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_INFO("Enter state: SERIAL\n");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -158,12 +166,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
 {
-    LOG_INFO("Enter state: POWER\n");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -198,7 +208,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_INFO("Enter state: ON\n");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -218,7 +228,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_INFO("Enter state: BOOT\n");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -235,6 +245,8 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
@@ -242,7 +254,11 @@ void PowerFSM_setup()
 
     // wake timer expired or a packet arrived
     // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
     powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
@@ -279,7 +295,8 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateLS, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_INPUT, NULL, "Input Device");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
+    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device");       // restarts the sleep timer
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
 
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
     powerFSM.add_transition(&stateON, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
@@ -333,12 +350,12 @@ void PowerFSM_setup()
                                   getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
 
+// We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
-    State *lowPowerState = &stateLS;
-    // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
-
     // See: https://github.com/meshtastic/firmware/issues/1071
-    if (isRouter || config.power.is_power_saving) {
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // modules
+    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
@@ -346,11 +363,7 @@ void PowerFSM_setup()
                                       getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
                                       NULL, "Bluetooth timeout");
     }
-
-    if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL,
-                                      "mesh timeout");
 #endif
 
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/PowerFSMThread.h

@@ -21,7 +21,7 @@ class PowerFSMThread : public OSThread
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
         /// cpu for serial rx - FIXME)
-        auto state = powerFSM.getState();
+        const State *state = powerFSM.getState();
         canSleep = (state != &statePOWER) && (state != &stateSERIAL);
 
         if (powerStatus->getHasUSB()) {
@@ -33,7 +33,7 @@ class PowerFSMThread : public OSThread
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 
-        return 10;
+        return 100;
     }
 };
 

src/RedirectablePrint.cpp

@@ -10,6 +10,10 @@
 #include <sys/time.h>
 #include <time.h>
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
 /**
  * A printer that doesn't go anywhere
  */
@@ -18,6 +22,12 @@ NoopPrint noopPrint;
 #if HAS_WIFI || HAS_ETHERNET
 extern Syslog syslog;
 #endif
+void RedirectablePrint::rpInit()
+{
+#ifdef HAS_FREE_RTOS
+    inDebugPrint = xSemaphoreCreateMutexStatic(&this->_MutexStorageSpace);
+#endif
+}
 
 void RedirectablePrint::setDestination(Print *_dest)
 {
@@ -62,10 +72,24 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
+#ifdef ARCH_PORTDUINO
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+        return 0;
+#endif
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        return 0;
+    }
     size_t r = 0;
-
+#ifdef HAS_FREE_RTOS
+    if (inDebugPrint != nullptr && xSemaphoreTake(inDebugPrint, portMAX_DELAY) == pdTRUE) {
+#else
     if (!inDebugPrint) {
         inDebugPrint = true;
+#endif
 
         va_list arg;
         va_start(arg, format);
@@ -87,10 +111,17 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
                 int hour = hms / SEC_PER_HOUR;
                 int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
                 int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
-
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#else
                 r += printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#endif
             } else
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#else
                 r += printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#endif
 
             auto thread = concurrency::OSThread::currentThread;
             if (thread) {
@@ -138,7 +169,11 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
         va_end(arg);
 
         isContinuationMessage = !hasNewline;
+#ifdef HAS_FREE_RTOS
+        xSemaphoreGive(inDebugPrint);
+#else
         inDebugPrint = false;
+#endif
     }
 
     return r;

src/RedirectablePrint.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include "../freertosinc.h"
 #include <Print.h>
 #include <stdarg.h>
 #include <string>
@@ -16,14 +17,19 @@ class RedirectablePrint : public Print
     /// Used to allow multiple logDebug messages to appear on a single log line
     bool isContinuationMessage = false;
 
+#ifdef HAS_FREE_RTOS
+    SemaphoreHandle_t inDebugPrint = nullptr;
+    StaticSemaphore_t _MutexStorageSpace;
+#else
     volatile bool inDebugPrint = false;
-
+#endif
   public:
     explicit RedirectablePrint(Print *_dest) : dest(_dest) {}
 
     /**
      * Set a new destination
      */
+    void rpInit();
     void setDestination(Print *dest);
 
     virtual size_t write(uint8_t c);
@@ -54,4 +60,4 @@ class NoopPrint : public Print
 /**
  * A printer that doesn't go anywhere
  */
-extern NoopPrint noopPrint;
+extern NoopPrint noopPrint;

src/SerialConsole.cpp

@@ -12,6 +12,7 @@ SerialConsole *console;
 void consoleInit()
 {
     new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+    DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
 void consolePrintf(const char *format, ...)
@@ -31,7 +32,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {

src/airtime.cpp

@@ -6,20 +6,22 @@ AirTime *airTime = NULL;
 
 // Don't read out of this directly. Use the helper functions.
 
+uint32_t air_period_tx[PERIODS_TO_LOG];
+uint32_t air_period_rx[PERIODS_TO_LOG];
+
 void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
         LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
-        myNodeInfo.air_period_tx[0] = myNodeInfo.air_period_tx[0] + airtime_ms;
+        air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
-
     } else if (reportType == RX_LOG) {
         LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
-        myNodeInfo.air_period_rx[0] = myNodeInfo.air_period_rx[0] + airtime_ms;
+        air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
         LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
@@ -55,16 +57,16 @@ void AirTime::airtimeRotatePeriod()
             this->airtimes.periodRX[i + 1] = this->airtimes.periodRX[i];
             this->airtimes.periodRX_ALL[i + 1] = this->airtimes.periodRX_ALL[i];
 
-            myNodeInfo.air_period_tx[i + 1] = this->airtimes.periodTX[i];
-            myNodeInfo.air_period_rx[i + 1] = this->airtimes.periodRX[i];
+            air_period_tx[i + 1] = this->airtimes.periodTX[i];
+            air_period_rx[i + 1] = this->airtimes.periodRX[i];
         }
 
         this->airtimes.periodTX[0] = 0;
         this->airtimes.periodRX[0] = 0;
         this->airtimes.periodRX_ALL[0] = 0;
 
-        myNodeInfo.air_period_tx[0] = 0;
-        myNodeInfo.air_period_rx[0] = 0;
+        air_period_tx[0] = 0;
+        air_period_rx[0] = 0;
 
         this->airtimes.lastPeriodIndex = this->currentPeriodIndex();
     }
@@ -179,18 +181,17 @@ int32_t AirTime::runOnce()
         }
 
         // Init airtime windows to all 0
-        for (int i = 0; i < myNodeInfo.air_period_rx_count; i++) {
+        for (int i = 0; i < PERIODS_TO_LOG; i++) {
             this->airtimes.periodTX[i] = 0;
             this->airtimes.periodRX[i] = 0;
             this->airtimes.periodRX_ALL[i] = 0;
 
-            // myNodeInfo.air_period_tx[i] = 0;
-            // myNodeInfo.air_period_rx[i] = 0;
+            // air_period_tx[i] = 0;
+            // air_period_rx[i] = 0;
         }
 
         firstTime = false;
         lastUtilPeriod = utilPeriod;
-
     } else {
         this->airtimeRotatePeriod();
 
@@ -206,12 +207,6 @@ int32_t AirTime::runOnce()
 
             this->utilizationTX[utilPeriodTX] = 0;
         }
-
-        // Update channel_utilization every second.
-        myNodeInfo.channel_utilization = airTime->channelUtilizationPercent();
-
-        // Update channel_utilization every second.
-        myNodeInfo.air_util_tx = airTime->utilizationTXPercent();
     }
     /*
         LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
@@ -223,4 +218,4 @@ int32_t AirTime::runOnce()
         LOG_DEBUG("\n");
     */
     return (1000 * 1);
-}
+}

src/airtime.h

@@ -17,9 +17,9 @@
 
   Example analytics:
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
                     other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.

src/commands.h

@@ -15,4 +15,6 @@ enum class Cmd {
     PRINT,
     START_SHUTDOWN_SCREEN,
     START_REBOOT_SCREEN,
+    SHOW_PREV_FRAME,
+    SHOW_NEXT_FRAME
 };

src/concurrency/InterruptableDelay.h

@@ -18,7 +18,7 @@ namespace concurrency
  *
  * Useful for they top level loop() delay call to keep the CPU powered down until our next scheduled event or some external event.
  *
- * This is implmented for FreeRTOS but should be easy to port to other operating systems.
+ * This is implemented for FreeRTOS but should be easy to port to other operating systems.
  */
 class InterruptableDelay
 {

src/concurrency/NotifiedWorkerThread.cpp

@@ -31,12 +31,14 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
         runASAP = true;
 
         notification = v;
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("setting notification %d\n", v);
+        }
         return true;
     } else {
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("dropping notification %d\n", v);
+        }
         return false;
     }
 }
@@ -64,8 +66,9 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
 
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("delaying notification %u\n", delay);
+        }
     }
 
     return didIt;

src/concurrency/OSThread.cpp

@@ -61,14 +61,17 @@ bool OSThread::shouldRun(unsigned long time)
 {
     bool r = Thread::shouldRun(time);
 
-    if (showRun && r)
+    if (showRun && r) {
         LOG_DEBUG("Thread %s: run\n", ThreadName.c_str());
+    }
 
-    if (showWaiting && enabled && !r)
+    if (showWaiting && enabled && !r) {
         LOG_DEBUG("Thread %s: wait %lu\n", ThreadName.c_str(), interval);
+    }
 
-    if (showDisabled && !enabled)
+    if (showDisabled && !enabled) {
         LOG_DEBUG("Thread %s: disabled\n", ThreadName.c_str());
+    }
 
     return r;
 }

src/concurrency/OSThread.h

@@ -53,7 +53,7 @@ class OSThread : public Thread
 
     static void setup();
 
-    int32_t disable();
+    virtual int32_t disable();
 
     /**
      * Wait a specified number msecs starting from the current time (rather than the last time we were run)
@@ -67,6 +67,7 @@ class OSThread : public Thread
      * Returns desired period for next invocation (or RUN_SAME for no change)
      */
     virtual int32_t runOnce() = 0;
+    bool sleepOnNextExecution = false;
 
     // Do not override this
     virtual void run();
@@ -87,4 +88,4 @@ extern bool hasBeenSetup;
 
 void assertIsSetup();
 
-} // namespace concurrency
+} // namespace concurrency

src/configuration.h

@@ -57,8 +57,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found
 
 /// Convert a preprocessor name into a quoted string
-#define xstr(s) str(s)
-#define str(s) #s
+#define xstr(s) ystr(s)
+#define ystr(s) #s
 
 /// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
 #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
@@ -98,8 +98,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// The m5stack I2C Keyboard (also RAK14004)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
+#define TDECK_KB_ADDR 0x55
+#define BBQ10_KB_ADDR 0x1F
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -109,6 +111,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
 #define QMC5883L_ADDR 0x1E
@@ -123,6 +126,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
+#define BMA423_ADDR 0x19
 
 // -----------------------------------------------------------------------------
 // LED
@@ -142,9 +146,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_BAUDRATE 9600
 
 #ifndef GPS_THREAD_INTERVAL
-#define GPS_THREAD_INTERVAL 100
+#define GPS_THREAD_INTERVAL 200
 #endif
 
+// convert 24-bit color to 16-bit (56K)
+#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
@@ -172,9 +179,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BUTTON
 #define HAS_BUTTON 0
 #endif
+#ifndef HAS_TRACKBALL
+#define HAS_TRACKBALL 0
+#endif
+#ifndef HAS_TOUCHSCREEN
+#define HAS_TOUCHSCREEN 0
+#endif
 #ifndef HAS_TELEMETRY
 #define HAS_TELEMETRY 0
 #endif
+#ifndef HAS_SENSOR
+#define HAS_SENSOR 0
+#endif
 #ifndef HAS_RADIO
 #define HAS_RADIO 0
 #endif
@@ -193,4 +209,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
-#endif
+#endif

src/detect/ScanI2C.cpp

@@ -30,14 +30,14 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, RAK14004};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const
@@ -73,4 +73,4 @@ bool ScanI2C::DeviceAddress::operator<(const ScanI2C::DeviceAddress &other) cons
         || (port != NO_I2C && other.port != NO_I2C && (address < other.address));
 }
 
-ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}
+ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}

src/detect/ScanI2C.h

@@ -16,6 +16,8 @@ class ScanI2C
         RTC_RV3028,
         RTC_PCF8563,
         CARDKB,
+        TDECKKB,
+        BBQ10KB,
         RAK14004,
         PMU_AXP192_AXP2101,
         BME_680,
@@ -23,6 +25,7 @@ class ScanI2C
         BMP_280,
         INA260,
         INA219,
+        INA3221,
         MCP9808,
         SHT31,
         SHTC3,
@@ -33,7 +36,10 @@ class ScanI2C
         PMSA0031,
         MPU6050,
         LIS3DH,
+        BMA423,
+#ifdef HAS_NCP5623
         NCP5623,
+#endif
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -95,4 +101,4 @@ class ScanI2C
 
   private:
     bool shouldSuppressScreen = false;
-};
+};

src/detect/ScanI2CTwoWire.cpp

@@ -2,7 +2,9 @@
 
 #include "concurrency/LockGuard.h"
 #include "configuration.h"
-
+#if defined(ARCH_PORTDUINO)
+#include "linux/LinuxHardwareI2C.h"
+#endif
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 #include "main.h" // atecc
 #endif
@@ -162,7 +164,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
     for (addr.address = 1; addr.address < 127; addr.address++) {
         i2cBus->beginTransmission(addr.address);
+#ifdef ARCH_PORTDUINO
+        if (i2cBus->read() != -1)
+            err = 0;
+        else
+            err = 2;
+#else
         err = i2cBus->endTransmission();
+#endif
         type = NONE;
         if (err == 0) {
             LOG_DEBUG("I2C device found at address 0x%x\n", addr.address);
@@ -212,9 +221,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n")
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
+#ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
-
+#endif
 #ifdef HAS_PMU
                 SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
 #endif
@@ -248,7 +260,10 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                     type = INA219;
                 }
                 break;
-
+            case INA3221_ADDR:
+                LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                type = INA3221;
+                break;
             case MCP9808_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
                 if (registerValue == 0x0400) {
@@ -273,6 +288,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
@@ -291,7 +307,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
 TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 {
-    if (address.port == ScanI2C::I2CPort::WIRE1) {
+    if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;
     } else {
 #ifdef I2C_SDA1
@@ -305,4 +321,4 @@ TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 size_t ScanI2CTwoWire::countDevices() const
 {
     return foundDevices.size();
-}
+}

src/detect/ScanI2CTwoWire.h

@@ -18,6 +18,8 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
@@ -51,6 +53,4 @@ class ScanI2CTwoWire : public ScanI2C
     uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
 
     DeviceType probeOLED(ScanI2C::DeviceAddress) const;
-
-    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
 };

src/detect/einkScan.h

@@ -1,6 +1,6 @@
 #include "../configuration.h"
 
-#ifdef RAK4630
+#ifdef RAK_4631
 #include "../main.h"
 #include <SPI.h>
 
@@ -64,4 +64,4 @@ void scanEInkDevice(void)
         LOG_DEBUG("EInk display not found\n");
     SPI1.end();
 }
-#endif
+#endif

src/error.h

@@ -9,4 +9,4 @@
 
 /// Record an error that should be reported via analytics
 void recordCriticalError(meshtastic_CriticalErrorCode code = meshtastic_CriticalErrorCode_UNSPECIFIED, uint32_t address = 0,
-                         const char *filename = NULL);
+                         const char *filename = NULL);

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>
@@ -44,4 +44,4 @@ typedef uint32_t BaseType_t;
 
 enum eNotifyAction { eNoAction, eSetValueWithoutOverwrite, eSetValueWithOverwrite };
 
-#endif
+#endif

src/gps/GPS.h

@@ -2,7 +2,16 @@
 
 #include "GPSStatus.h"
 #include "Observer.h"
+#include "TinyGPS++.h"
 #include "concurrency/OSThread.h"
+#include "input/RotaryEncoderInterruptImpl1.h"
+#include "input/UpDownInterruptImpl1.h"
+#include "modules/PositionModule.h"
+
+// Allow defining the polarity of the ENABLE output.  default is active high
+#ifndef GPS_EN_ACTIVE
+#define GPS_EN_ACTIVE 1
+#endif
 
 struct uBloxGnssModelInfo {
     char swVersion[30];
@@ -14,9 +23,17 @@ struct uBloxGnssModelInfo {
 typedef enum {
     GNSS_MODEL_MTK,
     GNSS_MODEL_UBLOX,
-    GNSS_MODEL_UNKONW,
+    GNSS_MODEL_UC6580,
+    GNSS_MODEL_UNKNOWN,
 } GnssModel_t;
 
+typedef enum {
+    GNSS_RESPONSE_NONE,
+    GNSS_RESPONSE_NAK,
+    GNSS_RESPONSE_FRAME_ERRORS,
+    GNSS_RESPONSE_OK,
+} GPS_RESPONSE;
+
 // Generate a string representation of DOP
 const char *getDOPString(uint32_t dop);
 
@@ -27,26 +44,49 @@ const char *getDOPString(uint32_t dop);
  */
 class GPS : private concurrency::OSThread
 {
+    TinyGPSPlus reader;
+    uint8_t fixQual = 0; // fix quality from GPGGA
+    uint32_t lastChecksumFailCount = 0;
+
+#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
+    // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
+    // via optional feature "custom fields", currently disabled (bug #525)
+    TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA
+    TinyGPSCustom gsapdop;    // custom extract PDOP from GPGSA
+    uint8_t fixType = 0;      // fix type from GPGSA
+#endif
   private:
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastWhileActiveMsec = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0;
+    const int serialSpeeds[6] = {9600, 4800, 38400, 57600, 115200, 9600};
+
+    uint32_t rx_gpio = 0;
+    uint32_t tx_gpio = 0;
+    uint32_t en_gpio = 0;
+    int32_t averageLockTime = 0;
+    uint32_t GPSCycles = 0;
+
+    int speedSelect = 0;
+    int probeTries = 2;
 
     /**
      * hasValidLocation - indicates that the position variables contain a complete
-     *   GPS location, valid and fresh (< gps_update_interval + gps_attempt_time)
+     *   GPS location, valid and fresh (< gps_update_interval + position_broadcast_secs)
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
     bool isAwake = false; // true if we want a location right now
 
-    bool wakeAllowed = true; // false if gps must be forced to sleep regardless of what time it is
+    bool isInPowersave = false;
 
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
 
     bool hasGPS = false; // Do we have a GPS we are talking to
 
+    bool GPSInitFinished = false; // Init thread finished?
+    bool GPSInitStarted = false;  // Init thread finished?
+
     uint8_t numSatellites = 0;
 
-    CallbackObserver<GPS, void *> notifySleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareSleep);
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
     CallbackObserver<GPS, void *> notifyGPSSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
 
@@ -54,6 +94,25 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
     static HardwareSerial *_serial_gps;
 
+    static uint8_t _message_PMREQ[];
+    static const uint8_t _message_CFG_RXM_PSM[];
+    static const uint8_t _message_CFG_RXM_ECO[];
+    static const uint8_t _message_CFG_PM2[];
+    static const uint8_t _message_GNSS_7[];
+    static const uint8_t _message_GNSS[];
+    static const uint8_t _message_JAM[];
+    static const uint8_t _message_NAVX5[];
+    static const uint8_t _message_1HZ[];
+    static const uint8_t _message_GLL[];
+    static const uint8_t _message_GSA[];
+    static const uint8_t _message_GSV[];
+    static const uint8_t _message_VTG[];
+    static const uint8_t _message_RMC[];
+    static const uint8_t _message_AID[];
+    static const uint8_t _message_GGA[];
+    static const uint8_t _message_PMS[];
+    static const uint8_t _message_SAVE[];
+
     meshtastic_Position p = meshtastic_Position_init_default;
 
     GPS() : concurrency::OSThread("GPS") {}
@@ -68,6 +127,17 @@ class GPS : private concurrency::OSThread
      */
     virtual bool setup();
 
+    // re-enable the thread
+    void enable();
+
+    // Disable the thread
+    int32_t disable() override;
+
+    // toggle between enabled/disabled
+    void toggleGpsMode();
+
+    void setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime);
+
     /// Returns true if we have acquired GPS lock.
     virtual bool hasLock();
 
@@ -77,67 +147,22 @@ class GPS : private concurrency::OSThread
     /// Return true if we are connected to a GPS
     bool isConnected() const { return hasGPS; }
 
-    bool isPowerSaving() const { return !config.position.gps_enabled; }
+    bool isPowerSaving() const { return config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED; }
 
-    /**
-     * Restart our lock attempt - try to get and broadcast a GPS reading ASAP
-     * called after the CPU wakes from light-sleep state
-     *
-     * Or set to false, to disallow any sort of waking
-     * */
-    void forceWake(bool on);
+    // Empty the input buffer as quickly as possible
+    void clearBuffer();
 
-    // Some GPS modules (ublock) require factory reset
-    virtual bool factoryReset() { return true; }
+    // Create a ublox packet for editing in memory
+    uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
 
-  protected:
-    /// Do gps chipset specific init, return true for success
-    virtual bool setupGPS();
+    // scratch space for creating ublox packets
+    uint8_t UBXscratch[250] = {0};
 
-    /// If possible force the GPS into sleep/low power mode
-    virtual void sleep();
+    int rebootsSeen = 0;
 
-    /// wake the GPS into normal operation mode
-    virtual void wake();
-
-    /** Subclasses should look for serial rx characters here and feed it to their GPS parser
-     *
-     * Return true if we received a valid message from the GPS
-     */
-    virtual bool whileIdle() = 0;
-
-    /** Idle processing while GPS is looking for lock, called once per secondish */
-    virtual void whileActive() {}
-
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a time
-     */
-    virtual bool lookForTime() = 0;
-
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a new location
-     */
-    virtual bool lookForLocation() = 0;
-
-    /// Record that we have a GPS
-    void setConnected();
-
-    void setNumSatellites(uint8_t n);
-
-  private:
-    /// Prepare the GPS for the cpu entering deep or light sleep, expect to be gone for at least 100s of msecs
-    /// always returns 0 to indicate okay to sleep
-    int prepareSleep(void *unused);
-
-    /// Prepare the GPS for the cpu entering deep sleep, expect to be gone for at least 100s of msecs
-    /// always returns 0 to indicate okay to sleep
-    int prepareDeepSleep(void *unused);
+    int getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID, uint32_t waitMillis);
+    GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
+    GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
 
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
@@ -145,6 +170,59 @@ class GPS : private concurrency::OSThread
      * calls sleep/wake
      */
     void setAwake(bool on);
+    virtual bool factoryReset();
+
+    // Creates an instance of the GPS class.
+    // Returns the new instance or null if the GPS is not present.
+    static GPS *createGps();
+
+  protected:
+    /**
+     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
+     * Override this method to check for new locations
+     *
+     * @return true if we've acquired a time
+     */
+
+    /**
+     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
+     * Override this method to check for new locations
+     *
+     * @return true if we've acquired a new location
+     */
+
+    /// Record that we have a GPS
+    void setConnected();
+
+    /** Subclasses should look for serial rx characters here and feed it to their GPS parser
+     *
+     * Return true if we received a valid message from the GPS
+     */
+    virtual bool whileIdle();
+
+    /**
+     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
+     * Override this method to check for new locations
+     *
+     * @return true if we've acquired a time
+     */
+    virtual bool lookForTime();
+
+    /**
+     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
+     * Override this method to check for new locations
+     *
+     * @return true if we've acquired a new location
+     */
+    virtual bool lookForLocation();
+
+  private:
+    /// Prepare the GPS for the cpu entering deep sleep, expect to be gone for at least 100s of msecs
+    /// always returns 0 to indicate okay to sleep
+    int prepareDeepSleep(void *unused);
+
+    // Calculate checksum
+    void UBXChecksum(uint8_t *message, size_t length);
 
     /** Get how long we should stay looking for each aquisition
      */
@@ -154,8 +232,6 @@ class GPS : private concurrency::OSThread
      */
     uint32_t getSleepTime() const;
 
-    bool getACK(uint8_t c, uint8_t i);
-
     /**
      * Tell users we have new GPS readings
      */
@@ -164,19 +240,14 @@ class GPS : private concurrency::OSThread
     virtual int32_t runOnce() override;
 
     // Get GNSS model
-    GnssModel_t probe();
-
-    int getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID);
+    String getNMEA();
+    GnssModel_t probe(int serialSpeed);
 
     // delay counter to allow more sats before fixed position stops GPS thread
     uint8_t fixeddelayCtr = 0;
 
   protected:
-    GnssModel_t gnssModel = GNSS_MODEL_UNKONW;
+    GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
 };
 
-// Creates an instance of the GPS class.
-// Returns the new instance or null if the GPS is not present.
-GPS *createGps();
-
-extern GPS *gps;
+extern GPS *gps;

src/gps/GeoCoord.cpp

@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon
 
 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 
 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -41,7 +41,7 @@ void GeoCoord::setCoords()
 
 void GeoCoord::updateCoords(int32_t lat, int32_t lon, int32_t alt)
 {
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != lat || _longitude != lon || _altitude != alt) {
         _dirty = true;
         _latitude = lat;
@@ -55,7 +55,7 @@ void GeoCoord::updateCoords(const double lat, const double lon, const int32_t al
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -69,7 +69,7 @@ void GeoCoord::updateCoords(const float lat, const float lon, const int32_t alt)
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -217,7 +217,7 @@ void GeoCoord::latLongToOSGR(const double lat, const double lon, OSGR &osgr)
     double eta2 = v / rho - 1;
     double mA = (1 + n + (5 / 4) * n * n + (5 / 4) * n * n * n) * (phi - phi0);
     double mB = (3 * n + 3 * n * n + (21 / 8) * n * n * n) * sin(phi - phi0) * cos(phi + phi0);
-    // loss of precision in mC & mD due to floating point rounding can cause innaccuracy of northing by a few meters
+    // loss of precision in mC & mD due to floating point rounding can cause inaccuracy of northing by a few meters
     double mC = (15 / 8 * n * n + 15 / 8 * n * n * n) * sin(2 * (phi - phi0)) * cos(2 * (phi + phi0));
     double mD = (35 / 24) * n * n * n * sin(3 * (phi - phi0)) * cos(3 * (phi + phi0));
     double m = b * f0 * (mA - mB + mC - mD);

src/gps/GeoCoord.h

@@ -65,7 +65,7 @@ struct MGRS {
     uint32_t northing;
 };
 
-// A struct to hold the data for a OSGR coordiante
+// A struct to hold the data for a OSGR coordinate
 struct OSGR {
     char e100k;
     char n100k;

src/gps/NMEAGPS.cpp

@@ -1,255 +0,0 @@
-#include "NMEAGPS.h"
-#include "RTC.h"
-#include "configuration.h"
-
-#include <TinyGPS++.h>
-
-// GPS solutions older than this will be rejected - see TinyGPSDatum::age()
-#define GPS_SOL_EXPIRY_MS 5000 // in millis. give 1 second time to combine different sentences. NMEA Frequency isn't higher anyway
-#define NMEA_MSG_GXGSA "GNGSA" // GSA message (GPGSA, GNGSA etc)
-
-static int32_t toDegInt(RawDegrees d)
-{
-    int32_t degMult = 10000000; // 1e7
-    int32_t r = d.deg * degMult + d.billionths / 100;
-    if (d.negative)
-        r *= -1;
-    return r;
-}
-
-bool NMEAGPS::factoryReset()
-{
-#ifdef PIN_GPS_REINIT
-    // The L76K GNSS on the T-Echo requires the RESET pin to be pulled LOW
-    digitalWrite(PIN_GPS_REINIT, 0);
-    pinMode(PIN_GPS_REINIT, OUTPUT);
-    delay(150); // The L76K datasheet calls for at least 100MS delay
-    digitalWrite(PIN_GPS_REINIT, 1);
-#endif
-
-    // send the UBLOX Factory Reset Command regardless of detect state, something is very wrong, just assume it's UBLOX.
-    // Factory Reset
-    byte _message_reset[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFB, 0x00, 0x00, 0x00,
-                             0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x17, 0x2B, 0x7E};
-    _serial_gps->write(_message_reset, sizeof(_message_reset));
-    delay(1000);
-    return true;
-}
-
-bool NMEAGPS::setupGPS()
-{
-    GPS::setupGPS();
-
-#ifdef PIN_GPS_PPS
-    // pulse per second
-    // FIXME - move into shared GPS code
-    pinMode(PIN_GPS_PPS, INPUT);
-#endif
-
-// Currently disabled per issue #525 (TinyGPS++ crash bug)
-// when fixed upstream, can be un-disabled to enable 3D FixType and PDOP
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    // see NMEAGPS.h
-    gsafixtype.begin(reader, NMEA_MSG_GXGSA, 2);
-    gsapdop.begin(reader, NMEA_MSG_GXGSA, 15);
-    LOG_DEBUG("Using " NMEA_MSG_GXGSA " for 3DFIX and PDOP\n");
-#else
-    LOG_DEBUG("GxGSA NOT available\n");
-#endif
-
-    return true;
-}
-
-/**
- * Perform any processing that should be done only while the GPS is awake and looking for a fix.
- * Override this method to check for new locations
- *
- * @return true if we've acquired a new location
- */
-bool NMEAGPS::lookForTime()
-{
-    auto ti = reader.time;
-    auto d = reader.date;
-    if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
-        /* Convert to unix time
-The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
-(midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
-*/
-        struct tm t;
-        t.tm_sec = ti.second();
-        t.tm_min = ti.minute();
-        t.tm_hour = ti.hour();
-        t.tm_mday = d.day();
-        t.tm_mon = d.month() - 1;
-        t.tm_year = d.year() - 1900;
-        t.tm_isdst = false;
-        if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d\n", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec);
-            perhapsSetRTC(RTCQualityGPS, t);
-            return true;
-        } else
-            return false;
-    } else
-        return false;
-}
-
-/**
- * Perform any processing that should be done only while the GPS is awake and looking for a fix.
- * Override this method to check for new locations
- *
- * @return true if we've acquired a new location
- */
-bool NMEAGPS::lookForLocation()
-{
-    // By default, TinyGPS++ does not parse GPGSA lines, which give us
-    //   the 2D/3D fixType (see NMEAGPS.h)
-    // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)
-    fixQual = reader.fixQuality();
-
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    fixType = atoi(gsafixtype.value()); // will set to zero if no data
-    // LOG_DEBUG("FIX QUAL=%d, TYPE=%d\n", fixQual, fixType);
-#endif
-
-    // check if GPS has an acceptable lock
-    if (!hasLock())
-        return false;
-
-#ifdef GPS_EXTRAVERBOSE
-    LOG_DEBUG("AGE: LOC=%d FIX=%d DATE=%d TIME=%d\n", reader.location.age(),
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-              gsafixtype.age(),
-#else
-              0,
-#endif
-              reader.date.age(), reader.time.age());
-#endif // GPS_EXTRAVERBOSE
-
-    // check if a complete GPS solution set is available for reading
-    //   tinyGPSDatum::age() also includes isValid() test
-    // FIXME
-    if (!((reader.location.age() < GPS_SOL_EXPIRY_MS) &&
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-          (gsafixtype.age() < GPS_SOL_EXPIRY_MS) &&
-#endif
-          (reader.time.age() < GPS_SOL_EXPIRY_MS) && (reader.date.age() < GPS_SOL_EXPIRY_MS))) {
-        LOG_WARN("SOME data is TOO OLD: LOC %u, TIME %u, DATE %u\n", reader.location.age(), reader.time.age(), reader.date.age());
-        return false;
-    }
-
-    // Is this a new point or are we re-reading the previous one?
-    if (!reader.location.isUpdated())
-        return false;
-
-    // We know the solution is fresh and valid, so just read the data
-    auto loc = reader.location.value();
-
-    // Bail out EARLY to avoid overwriting previous good data (like #857)
-    if (toDegInt(loc.lat) > 900000000) {
-#ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("Bail out EARLY on LAT %i\n", toDegInt(loc.lat));
-#endif
-        return false;
-    }
-    if (toDegInt(loc.lng) > 1800000000) {
-#ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("Bail out EARLY on LNG %i\n", toDegInt(loc.lng));
-#endif
-        return false;
-    }
-
-    p.location_source = meshtastic_Position_LocSource_LOC_INTERNAL;
-
-    // Dilution of precision (an accuracy metric) is reported in 10^2 units, so we need to scale down when we use it
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    p.HDOP = reader.hdop.value();
-    p.PDOP = TinyGPSPlus::parseDecimal(gsapdop.value());
-    // LOG_DEBUG("PDOP=%d, HDOP=%d\n", p.PDOP, p.HDOP);
-#else
-    // FIXME! naive PDOP emulation (assumes VDOP==HDOP)
-    // correct formula is PDOP = SQRT(HDOP^2 + VDOP^2)
-    p.HDOP = reader.hdop.value();
-    p.PDOP = 1.41 * reader.hdop.value();
-#endif
-
-    // Discard incomplete or erroneous readings
-    if (reader.hdop.value() == 0)
-        return false;
-
-    p.latitude_i = toDegInt(loc.lat);
-    p.longitude_i = toDegInt(loc.lng);
-
-    p.altitude_geoidal_separation = reader.geoidHeight.meters();
-    p.altitude_hae = reader.altitude.meters() + p.altitude_geoidal_separation;
-    p.altitude = reader.altitude.meters();
-
-    p.fix_quality = fixQual;
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    p.fix_type = fixType;
-#endif
-
-    // positional timestamp
-    struct tm t;
-    t.tm_sec = reader.time.second();
-    t.tm_min = reader.time.minute();
-    t.tm_hour = reader.time.hour();
-    t.tm_mday = reader.date.day();
-    t.tm_mon = reader.date.month() - 1;
-    t.tm_year = reader.date.year() - 1900;
-    t.tm_isdst = false;
-    p.timestamp = mktime(&t);
-
-    // Nice to have, if available
-    if (reader.satellites.isUpdated()) {
-        p.sats_in_view = reader.satellites.value();
-    }
-
-    if (reader.course.isUpdated() && reader.course.isValid()) {
-        if (reader.course.value() < 36000) { // sanity check
-            p.ground_track =
-                reader.course.value() * 1e3; // Scale the heading (in degrees * 10^-2) to match the expected degrees * 10^-5
-        } else {
-            LOG_WARN("BOGUS course.value() REJECTED: %d\n", reader.course.value());
-        }
-    }
-
-    if (reader.speed.isUpdated() && reader.speed.isValid()) {
-        p.ground_speed = reader.speed.kmph();
-    }
-
-    return true;
-}
-
-bool NMEAGPS::hasLock()
-{
-    // Using GPGGA fix quality indicator
-    if (fixQual >= 1 && fixQual <= 5) {
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-        // Use GPGSA fix type 2D/3D (better) if available
-        if (fixType == 3 || fixType == 0) // zero means "no data received"
-#endif
-            return true;
-    }
-
-    return false;
-}
-
-bool NMEAGPS::hasFlow()
-{
-    return reader.passedChecksum() > 0;
-}
-
-bool NMEAGPS::whileIdle()
-{
-    bool isValid = false;
-
-    // First consume any chars that have piled up at the receiver
-    while (_serial_gps->available() > 0) {
-        int c = _serial_gps->read();
-        // LOG_DEBUG("%c", c);
-        isValid |= reader.encode(c);
-    }
-
-    return isValid;
-}

src/gps/NMEAGPS.h

@@ -1,56 +0,0 @@
-#pragma once
-
-#include "GPS.h"
-#include "Observer.h"
-#include "TinyGPS++.h"
-
-/**
- * A gps class thatreads from a NMEA GPS stream (and FIXME - eventually keeps the gps powered down except when reading)
- *
- * When new data is available it will notify observers.
- */
-class NMEAGPS : public GPS
-{
-    TinyGPSPlus reader;
-    uint8_t fixQual = 0; // fix quality from GPGGA
-
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
-    // via optional feature "custom fields", currently disabled (bug #525)
-    TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA
-    TinyGPSCustom gsapdop;    // custom extract PDOP from GPGSA
-    uint8_t fixType = 0;      // fix type from GPGSA
-#endif
-
-  public:
-    virtual bool setupGPS() override;
-
-    virtual bool factoryReset() override;
-
-  protected:
-    /** Subclasses should look for serial rx characters here and feed it to their GPS parser
-     *
-     * Return true if we received a valid message from the GPS
-     */
-    virtual bool whileIdle() override;
-
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a time
-     */
-    virtual bool lookForTime() override;
-
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a new location
-     */
-    virtual bool lookForLocation() override;
-
-    virtual bool hasLock() override;
-
-    virtual bool hasFlow() override;
-};

src/gps/NMEAWPL.cpp

@@ -18,10 +18,11 @@
  * -------------------------------------------
  */
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name)
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    uint32_t len = snprintf(buf, bufsz, "$GNWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", geoCoord.getDMSLatDeg(),
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
                             (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
                             geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
                             geoCoord.getDMSLonCP(), name);
@@ -33,6 +34,21 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
     return len;
 }
 
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode)
+{
+    GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
+                            (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
+                            geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
+                            geoCoord.getDMSLonCP(), name);
+    uint32_t chk = 0;
+    for (uint32_t i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += snprintf(buf + len, bufsz - len, "*%02X\r\n", chk);
+    return len;
+}
 /* -------------------------------------------
  *        1         2       3 4       5 6 7  8   9  10 11 12 13  14   15
  *        |         |       | |       | | |  |   |   | |   | |   |    |

src/gps/NMEAWPL.h

@@ -3,5 +3,6 @@
 #include "main.h"
 #include <Arduino.h>
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name);
-uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);

src/gps/RTC.cpp

@@ -17,9 +17,13 @@ static uint32_t
     timeStartMsec; // Once we have a GPS lock, this is where we hold the initial msec clock that corresponds to that time
 static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only updated once on initial lock
 
+/**
+ * Reads the current date and time from the RTC module and updates the system time.
+ * @return True if the RTC was successfully read and the system time was updated, false otherwise.
+ */
 void readFromRTC()
 {
-    struct timeval tv; /* btw settimeofday() is helpfull here too*/
+    struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
     if (rtc_found.address == RV3028_RTC) {
         uint32_t now = millis();
@@ -83,7 +87,15 @@ void readFromRTC()
 #endif
 }
 
-/// If we haven't yet set our RTC this boot, set it from a GPS derived time
+/**
+ * Sets the RTC (Real-Time Clock) if the provided time is of higher quality than the current RTC time.
+ *
+ * @param q The quality of the provided time.
+ * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
+ * @return True if the RTC was set, false otherwise.
+ *
+ * If we haven't yet set our RTC this boot, set it from a GPS derived time
+ */
 bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 {
     static uint32_t lastSetMsec = 0;
@@ -91,9 +103,8 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 
     bool shouldSet;
     if (q > currentQuality) {
-        currentQuality = q;
         shouldSet = true;
-        LOG_DEBUG("Upgrading time to RTC %ld secs (quality %d)\n", tv->tv_sec, q);
+        LOG_DEBUG("Upgrading time to quality %d\n", q);
     } else if (q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
         // Every 12 hrs we will slam in a new GPS time, to correct for local RTC clock drift
         shouldSet = true;
@@ -102,12 +113,12 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
         shouldSet = false;
 
     if (shouldSet) {
+        currentQuality = q;
         lastSetMsec = now;
 
         // This delta value works on all platforms
         timeStartMsec = now;
         zeroOffsetSecs = tv->tv_sec;
-
         // If this platform has a setable RTC, set it
 #ifdef RV3028_RTC
         if (rtc_found.address == RV3028_RTC) {
@@ -141,7 +152,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #endif
 
         // nrf52 doesn't have a readable RTC (yet - software not written)
-#ifdef HAS_RTC
+#if HAS_RTC
         readFromRTC();
 #endif
 
@@ -151,6 +162,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     }
 }
 
+/**
+ * Sets the RTC time if the provided time is of higher quality than the current RTC time.
+ *
+ * @param q The quality of the provided time.
+ * @param t The time to potentially set the RTC to.
+ * @return True if the RTC was set to the provided time, false otherwise.
+ */
 bool perhapsSetRTC(RTCQuality q, struct tm &t)
 {
     /* Convert to unix time
@@ -171,11 +189,22 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     }
 }
 
+/**
+ * Returns the current time in seconds since the Unix epoch (January 1, 1970).
+ *
+ * @return The current time in seconds since the Unix epoch.
+ */
 uint32_t getTime()
 {
     return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
 }
 
+/**
+ * Returns the current time from the RTC if the quality of the time is at least minQuality.
+ *
+ * @param minQuality The minimum quality of the RTC time required for it to be considered valid.
+ * @return The current time from the RTC if it meets the minimum quality requirement, or 0 if the time is not valid.
+ */
 uint32_t getValidTime(RTCQuality minQuality)
 {
     return (currentQuality >= minQuality) ? getTime() : 0;

src/gps/ubx.h

@@ -0,0 +1,238 @@
+uint8_t GPS::_message_PMREQ[] PROGMEM = {
+    0x00, 0x00, // 4 bytes duration of request task
+    0x00, 0x00, // (milliseconds)
+    0x02, 0x00, // Task flag bitfield
+    0x00, 0x00  // byte index 1 = sleep mode
+};
+
+const uint8_t GPS::_message_CFG_RXM_PSM[] PROGMEM = {
+    0x08, // Reserved
+    0x01  // Power save mode
+};
+
+// only for Neo-6
+const uint8_t GPS::_message_CFG_RXM_ECO[] PROGMEM = {
+    0x08, // Reserved
+    0x04  // eco mode
+};
+
+const uint8_t GPS::_message_CFG_PM2[] PROGMEM = {
+    0x01,                   // version
+    0x00,                   // Reserved 1, set to 0x06 by u-Center
+    0x00,                   // Reserved 2
+    0x00,                   // Reserved 1
+    0x00, 0x11, 0x03, 0x00, // flags-> cyclic mode, wait for normal fix ok, do not wake to update RTC or EPH, doNotEnterOff,
+                            //    LimitPeakCurrent
+    0xE8, 0x03, 0x00, 0x00, // update period 1000 ms
+    0x10, 0x27, 0x00, 0x00, // search period 10s
+    0x00, 0x00, 0x00, 0x00, // Grid offset 0
+    0x01, 0x00,             // onTime 1 second
+    0x00, 0x00,             // min search time 0
+    0x00, 0x00,             // 0x2C, 0x01,  // reserved 4
+    0x00, 0x00,             // 0x00, 0x00,  // reserved 5
+    0x00, 0x00, 0x00, 0x00, // 0x4F, 0xC1, 0x03, 0x00, // reserved 6
+    0x00, 0x00, 0x00, 0x00, // 0x87, 0x02, 0x00, 0x00, // reserved 7
+    0x00,                   // 0xFF,        // reserved 8
+    0x00,                   // 0x00,        // reserved 9
+    0x00, 0x00,             // 0x00, 0x00,  // reserved 10
+    0x00, 0x00, 0x00, 0x00  // 0x64, 0x40, 0x01, 0x00  // reserved 11
+};
+
+const uint8_t GPS::_message_GNSS_7[] = {
+    0x00, // msgVer (0 for this version)
+    0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0)
+    0xff, // numTrkChUse (max number of channels to use, 0xff = max available)
+    0x02, // numConfigBlocks (number of GNSS systems), most modules support maximum 3 GNSS systems
+    // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
+    0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x00, 0x01, // GPS
+    0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x00, 0x01  // SBAS
+};
+
+// It's not critical if the module doesn't acknowledge this configuration.
+// The module should operate adequately with its factory or previously saved settings.
+// It appears that there is a firmware bug in some GPS modules: When an attempt is made
+// to overwrite a saved state with identical values, no ACK/NAK is received, contrary to
+// what is specified in the Ublox documentation.
+// There is also a possibility that the module may be GPS-only.
+const uint8_t GPS::_message_GNSS[] = {
+    0x00, // msgVer (0 for this version)
+    0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0)
+    0xff, // numTrkChUse (max number of channels to use, 0xff = max available)
+    0x03, // numConfigBlocks (number of GNSS systems), most modules support maximum 3 GNSS systems
+    // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
+    0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // GPS
+    0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // SBAS
+    0x06, 0x08, 0x0e, 0x00, 0x01, 0x00, 0x01, 0x01  // GLONASS
+};
+// Enable jamming/interference monitor
+
+// For Neo-6
+const uint8_t GPS::_message_JAM[] = {
+    0xf3, 0xac, 0x62, 0xad, // config1 bbThreshold = 3, cwThreshold = 15, enable = 1, reserved bits 0x16B156
+    0x1e, 0x03, 0x00, 0x00  // config2 antennaSetting Unknown = 0, reserved 3, = 0x00,0x00, reserved 2 = 0x31E
+};
+/* // WIP GPS reconfig
+// For Neo-6, Max-7 and Neo-7
+const uint8_t GPS::_message_JAM_6_7[] = {
+    0xf3, 0xac, 0x62, 0xad,  // config1 bbThreshold = 3, cwThreshold = 15, enable = 1, reserved bits 0x16B156
+    0x1e, 0x03, 0x00, 0x00   // config2 antennaSetting Unknown = 0, reserved 3, = 0x00,0x00, reserved 2 = 0x31E
+};
+
+// For M8
+const uint8_t GPS::_message_JAM_8[] = {
+    0xf3, 0xac, 0x62, 0xad,  // config1 bbThreshold = 3, cwThreshold = 15, enable1 = 1, reserved bits 0x16B156
+    0x1e, 0x43, 0x00, 0x00   // config2 antennaSetting Unknown = 0, enable2 = 1, generalBits = 0x31E
+};
+*/
+
+// Configure navigation engine expert settings:
+// there are many variations of what were Reserved fields for the Neo-6 in later versions
+// ToDo: check UBX-MON-VER for module type and protocol version
+
+// For the Neo-6
+const uint8_t GPS::_message_NAVX5[] = {
+    0x00, 0x00,             // msgVer (0 for this version)
+    0x4c, 0x66,             // mask1
+    0x00, 0x00, 0x00, 0x00, // Reserved 0
+    0x00,                   // Reserved 1
+    0x00,                   // Reserved 2
+    0x03,                   // minSVs (Minimum number of satellites for navigation) = 3
+    0x10,                   // maxSVs (Maximum number of satellites for navigation) = 16
+    0x06,                   // minCNO (Minimum satellite signal level for navigation) = 6 dBHz
+    0x00,                   // Reserved 5
+    0x00,                   // iniFix3D (Initial fix must be 3D) (0 = false 1 = true)
+    0x00,                   // Reserved 6
+    0x00,                   // Reserved 7
+    0x00,                   // Reserved 8
+    0x00, 0x00,             // wknRollover 0 = firmware default
+    0x00, 0x00, 0x00, 0x00, // Reserved 9
+    0x00,                   // Reserved 10
+    0x00,                   // Reserved 11
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
+    0x01,                   // useAOP  (AssistNow Autonomous configuration) = 1 (enabled)
+    0x00,                   // Reserved 12
+    0x00,                   // Reserved 13
+    0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
+    0x00,                   // Reserved 14
+    0x00,                   // Reserved 15
+    0x00, 0x00,             // Reserved 3
+    0x00, 0x00, 0x00, 0x00  // Reserved 4
+};
+
+// Set GPS update rate to 1Hz
+// Lowering the update rate helps to save power.
+// Additionally, for some new modules like the M9/M10, an update rate lower than 5Hz
+// is recommended to avoid a known issue with satellites disappearing.
+const uint8_t GPS::_message_1HZ[] = {
+    0xE8, 0x03, // Measurement Rate (1000ms for 1Hz)
+    0x01, 0x00, // Navigation rate, always 1 in GPS mode
+    0x01, 0x00  // Time reference
+};
+
+// Disable GLL. GLL - Geographic position (latitude and longitude), which provides the current geographical
+// coordinates.
+const uint8_t GPS::_message_GLL[] = {
+    0xF0, 0x01, // NMEA ID for GLL
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Enable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
+// the DOP (Dilution of Precision)
+const uint8_t GPS::_message_GSA[] = {
+    0xF0, 0x02, // NMEA ID for GSA
+    0x00,       // Rate for DDC
+    0x01,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Disable GSV. GSV - Satellites in view, details the number and location of satellites in view.
+const uint8_t GPS::_message_GSV[] = {
+    0xF0, 0x03, // NMEA ID for GSV
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Disable VTG. VTG - Track made good and ground speed, which provides course and speed information relative to
+// the ground.
+const uint8_t GPS::_message_VTG[] = {
+    0xF0, 0x05, // NMEA ID for VTG
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Enable RMC. RMC - Recommended Minimum data, the essential gps pvt (position, velocity, time) data.
+const uint8_t GPS::_message_RMC[] = {
+    0xF0, 0x04, // NMEA ID for RMC
+    0x00,       // Rate for DDC
+    0x01,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Enable GGA. GGA - Global Positioning System Fix Data, which provides 3D location and accuracy data.
+const uint8_t GPS::_message_GGA[] = {
+    0xF0, 0x00, // NMEA ID for GGA
+    0x00,       // Rate for DDC
+    0x01,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Disable UBX-AID-ALPSRV as it may confuse TinyGPS. The Neo-6 seems to send this message
+// whether the AID Autonomous is enabled or not
+const uint8_t GPS::_message_AID[] = {
+    0x0B, 0x32, // NMEA ID for UBX-AID-ALPSRV
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// The Power Management configuration allows the GPS module to operate in different power modes for optimized
+// power consumption. The modes supported are: 0x00 = Full power: The module operates at full power with no power
+// saving. 0x01 = Balanced: The module dynamically adjusts the tracking behavior to balance power consumption.
+// 0x02 = Interval: The module operates in a periodic mode, cycling between tracking and power saving states.
+// 0x03 = Aggressive with 1 Hz: The module operates in a power saving mode with a 1 Hz update rate.
+// 0x04 = Aggressive with 2 Hz: The module operates in a power saving mode with a 2 Hz update rate.
+// 0x05 = Aggressive with 4 Hz: The module operates in a power saving mode with a 4 Hz update rate.
+// The 'period' field specifies the position update and search period. It is only valid when the powerSetupValue
+// is set to Interval; otherwise, it must be set to '0'. The 'onTime' field specifies the duration of the ON phase
+// and must be smaller than the period. It is only valid when the powerSetupValue is set to Interval; otherwise,
+// it must be set to '0'.
+// This command applies to M8 and higher products
+const uint8_t GPS::_message_PMS[] = {
+    0x00,       // Version (0)
+    0x03,       // Power setup value 3 = Agresssive 1Hz
+    0x00, 0x00, // period: not applicable, set to 0
+    0x00, 0x00, // onTime: not applicable, set to 0
+    0x00, 0x00  // reserved, generated by u-center
+};
+
+const uint8_t GPS::_message_SAVE[] = {
+    0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared
+    0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections
+    0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded
+    0x17                    // deviceMask: BBR, Flash, EEPROM, and SPI Flash
+};

src/graphics/EInkDisplay2.cpp

@@ -7,6 +7,10 @@
 #include "main.h"
 #include <SPI.h>
 
+#ifdef HELTEC_WIRELESS_PAPER
+SPIClass *hspi = NULL;
+#endif
+
 #define COLORED GxEPD_BLACK
 #define UNCOLORED GxEPD_WHITE
 
@@ -19,13 +23,13 @@
 #define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 
 // 4.2 inch 300x400 - GxEPD2_420_M01
-//#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
+// #define TECHO_DISPLAY_MODEL GxEPD2_420_M01
 
 // 2.9 inch 296x128 - GxEPD2_290_T5D
-//#define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
+// #define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
 
 // 1.54 inch 200x200 - GxEPD2_154_M09
-//#define TECHO_DISPLAY_MODEL GxEPD2_154_M09
+// #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
 
 #elif defined(MAKERPYTHON)
 // 2.9 inch 296x128 - GxEPD2_290_T5D
@@ -41,6 +45,9 @@
 // 1.54 inch 200x200 - GxEPD2_154_M09
 #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
 
+#elif defined(HELTEC_WIRELESS_PAPER)
+// #define TECHO_DISPLAY_MODEL GxEPD2_213_T5D
+#define TECHO_DISPLAY_MODEL GxEPD2_213_FC1
 #endif
 
 GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT> *adafruitDisplay;
@@ -48,7 +55,7 @@ GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT> *adafruitDisplay;
 EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
 #if defined(TTGO_T_ECHO)
-    setGeometry(GEOMETRY_RAWMODE, TECHO_DISPLAY_MODEL::WIDTH, TECHO_DISPLAY_MODEL::HEIGHT);
+    setGeometry(GEOMETRY_RAWMODE, 200, 200);
 #elif defined(RAK4630)
 
     // GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122
@@ -62,6 +69,10 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY
 
     // GxEPD2_154_M09
     // setGeometry(GEOMETRY_RAWMODE, 200, 200);
+
+#elif defined(HELTEC_WIRELESS_PAPER)
+    // GxEPD2_213_BN - 2.13 inch b/w 250x122
+    setGeometry(GEOMETRY_RAWMODE, 250, 122);
 #elif defined(MAKERPYTHON)
     // GxEPD2_290_T5D
     setGeometry(GEOMETRY_RAWMODE, 296, 128);
@@ -108,8 +119,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         // tft.drawBitmap(0, 0, buffer, 128, 64, TFT_YELLOW, TFT_BLACK);
         for (uint32_t y = 0; y < displayHeight; y++) {
             for (uint32_t x = 0; x < displayWidth; x++) {
-
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
                 auto b = buffer[x + (y / 8) * displayWidth];
                 auto isset = b & (1 << (y & 7));
                 adafruitDisplay->drawPixel(x, y, isset ? COLORED : UNCOLORED);
@@ -119,8 +129,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         LOG_DEBUG("Updating E-Paper... ");
 
 #if defined(TTGO_T_ECHO)
-        // ePaper.Reset(); // wake the screen from sleep
-        adafruitDisplay->display(false); // FIXME, use partial update mode
+        adafruitDisplay->nextPage();
 #elif defined(RAK4630) || defined(MAKERPYTHON)
 
         // RAK14000 2.13 inch b/w 250x122 actually now does support partial updates
@@ -137,7 +146,8 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
 #elif defined(PCA10059) || defined(M5_COREINK)
         adafruitDisplay->nextPage();
-
+#elif defined(HELTEC_WIRELESS_PAPER)
+        adafruitDisplay->nextPage();
 #elif defined(PRIVATE_HW) || defined(my)
         adafruitDisplay->nextPage();
 
@@ -182,14 +192,14 @@ bool EInkDisplay::connect()
     LOG_INFO("Doing EInk init\n");
 
 #ifdef PIN_EINK_PWR_ON
-    digitalWrite(PIN_EINK_PWR_ON, HIGH); // If we need to assert a pin to power external peripherals
     pinMode(PIN_EINK_PWR_ON, OUTPUT);
+    digitalWrite(PIN_EINK_PWR_ON, HIGH); // If we need to assert a pin to power external peripherals
 #endif
 
 #ifdef PIN_EINK_EN
     // backlight power, HIGH is backlight on, LOW is off
-    digitalWrite(PIN_EINK_EN, LOW);
     pinMode(PIN_EINK_EN, OUTPUT);
+    digitalWrite(PIN_EINK_EN, LOW);
 #endif
 
 #if defined(TTGO_T_ECHO)
@@ -199,6 +209,7 @@ bool EInkDisplay::connect()
         adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(RAK4630) || defined(MAKERPYTHON)
     {
@@ -218,6 +229,19 @@ bool EInkDisplay::connect()
             (void)adafruitDisplay;
         }
     }
+#elif defined(HELTEC_WIRELESS_PAPER)
+    {
+        hspi = new SPIClass(HSPI);
+        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+        delay(100);
+        pinMode(Vext, OUTPUT);
+        digitalWrite(Vext, LOW);
+        delay(100);
+        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
+        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        adafruitDisplay->init();
+        adafruitDisplay->setRotation(3);
+    }
 #elif defined(PCA10059)
     {
         auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
@@ -250,4 +274,4 @@ bool EInkDisplay::connect()
     return true;
 }
 
-#endif
+#endif

src/graphics/EInkDisplay2.h

@@ -3,7 +3,7 @@
 #include <OLEDDisplay.h>
 
 /**
- * An adapter class that allows using the TFT_eSPI library as if it was an OLEDDisplay implementation.
+ * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
  * Remaining TODO:
  * optimize display() to only draw changed pixels (see other OLED subclasses for examples)

src/graphics/RAKled.h

@@ -0,0 +1,5 @@
+#ifdef HAS_NCP5623
+#include <NCP5623.h>
+extern NCP5623 rgb;
+
+#endif

src/graphics/Screen.h

@@ -19,7 +19,6 @@ class Screen
     void setup() {}
     void setOn(bool) {}
     void print(const char *) {}
-    void adjustBrightness() {}
     void doDeepSleep() {}
     void forceDisplay() {}
     void startBluetoothPinScreen(uint32_t pin) {}
@@ -53,6 +52,7 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
+#include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "power.h"
 #include <string>
@@ -118,6 +118,8 @@ class Screen : public concurrency::OSThread
         CallbackObserver<Screen, const meshtastic_MeshPacket *>(this, &Screen::handleTextMessage);
     CallbackObserver<Screen, const UIFrameEvent *> uiFrameEventObserver =
         CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent);
+    CallbackObserver<Screen, const InputEvent *> inputObserver =
+        CallbackObserver<Screen, const InputEvent *>(this, &Screen::handleInputEvent);
 
   public:
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
@@ -152,11 +154,12 @@ class Screen : public concurrency::OSThread
 
     void blink();
 
-    /// Handles a button press.
+    /// Handle button press, trackball or swipe action)
     void onPress() { enqueueCmd(ScreenCmd{.cmd = Cmd::ON_PRESS}); }
+    void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
+    void showNextFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_NEXT_FRAME}); }
 
     // Implementation to Adjust Brightness
-    void adjustBrightness();
     uint8_t brightness = BRIGHTNESS_DEFAULT;
 
     /// Starts showing the Bluetooth PIN screen.
@@ -301,9 +304,11 @@ class Screen : public concurrency::OSThread
     // Use this handle to set things like battery status, user count, GPS status, etc.
     DebugInfo *debug_info() { return &debugInfo; }
 
+    // Handle observer events
     int handleStatusUpdate(const meshtastic::Status *arg);
     int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
+    int handleInputEvent(const InputEvent *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
     void forceDisplay();
@@ -319,6 +324,8 @@ class Screen : public concurrency::OSThread
     // Called periodically from the main loop.
     int32_t runOnce() final;
 
+    bool isAUTOOled = false;
+
   private:
     struct ScreenCmd {
         Cmd cmd;
@@ -343,6 +350,8 @@ class Screen : public concurrency::OSThread
     // Implementations of various commands, called from doTask().
     void handleSetOn(bool on);
     void handleOnPress();
+    void handleShowNextFrame();
+    void handleShowPrevFrame();
     void handleStartBluetoothPinScreen(uint32_t pin);
     void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
@@ -354,6 +363,9 @@ class Screen : public concurrency::OSThread
     /// Try to start drawing ASAP
     void setFastFramerate();
 
+    // Sets frame up for immediate drawing
+    void setFrameImmediateDraw(FrameCallback *drawFrames);
+
     /// Called when debug screen is to be drawn, calls through to debugInfo.drawFrame.
     static void drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
@@ -375,23 +387,11 @@ class Screen : public concurrency::OSThread
     DebugInfo debugInfo;
 
     /// Display device
+    OLEDDisplay *dispdev;
 
-#if defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
-    SH1106Wire dispdev;
-#elif defined(USE_SSD1306)
-    SSD1306Wire dispdev;
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
-    TFTDisplay dispdev;
-#elif defined(USE_EINK)
-    EInkDisplay dispdev;
-#elif defined(USE_ST7567)
-    ST7567Wire dispdev;
-#else
-    AutoOLEDWire dispdev;
-#endif
     /// UI helper for rendering to frames and switching between them
-    OLEDDisplayUi ui;
+    OLEDDisplayUi *ui;
 };
 
 } // namespace graphics
-#endif
+#endif

src/graphics/TFTDisplay.cpp

@@ -1,16 +1,423 @@
 #include "configuration.h"
+#include "main.h"
+#if ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
 
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER)
+#ifndef TFT_BACKLIGHT_ON
+#define TFT_BACKLIGHT_ON HIGH
+#endif
+
+#ifndef TFT_MESH
+#define TFT_MESH COLOR565(0x67, 0xEA, 0x94)
+#endif
+
+#if defined(ST7735S)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7735_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7735_BACKLIGHT_EN
+#endif
+
+#ifndef TFT_INVERT
+#define TFT_INVERT true
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7735S _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = ST7735_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7735_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7735_SDA;          // Set SPI MOSI pin number
+            cfg.pin_miso = ST7735_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7735_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7735_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7735_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7735_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = TFT_INVERT;       // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+#ifdef ST7735_BL_V03
+            if (heltec_version == 3) {
+                cfg.pin_bl = ST7735_BL_V03;
+            } else {
+                cfg.pin_bl = ST7735_BL_V05;
+            }
+#else
+            cfg.pin_bl = ST7735_BL; // Pin number to which the backlight is connected
+#endif
+            cfg.invert = true; // true to invert the brightness of the backlight
+            // cfg.freq = 44100;    // PWM frequency of backlight
+            // cfg.pwm_channel = 1; // PWM channel number to use
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#elif defined(RAK14014)
+#include <TFT_eSPI.h>
+TFT_eSPI *tft = nullptr;
+
+#elif defined(ST7789_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7789_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7789 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+#if HAS_TOUCHSCREEN
+#ifdef T_WATCH_S3
+    lgfx::Touch_FT5x06 _touch_instance;
+#else
+    lgfx::Touch_GT911 _touch_instance;
+#endif
+#endif
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // SPI
+            cfg.spi_host = ST7789_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;
+            cfg.use_lock = true;               // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                               // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7789_SCK;         // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7789_SDA;         // Set SPI MOSI pin number
+            cfg.pin_miso = ST7789_MISO;        // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7789_RS;            // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;               // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;             // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;               // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;               // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
+            cfg.dummy_read_pixel = 9;                  // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;                   // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;                       // Set to true if data can be read
+            cfg.invert = true;                         // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;                     // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            // cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            // cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control. (delete if not necessary)
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7789_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;     // true to invert the brightness of the backlight
+            // cfg.pwm_channel = 0;
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+#if HAS_TOUCHSCREEN
+        // Configure settings for touch screen control.
+        {
+            auto cfg = _touch_instance.config();
+
+            cfg.pin_cs = -1;
+            cfg.x_min = 0;
+            cfg.x_max = TFT_HEIGHT - 1;
+            cfg.y_min = 0;
+            cfg.y_max = TFT_WIDTH - 1;
+            cfg.pin_int = SCREEN_TOUCH_INT;
+            cfg.bus_shared = true;
+            cfg.offset_rotation = TFT_OFFSET_ROTATION;
+            // cfg.freq = 2500000;
+
+            // I2C
+            cfg.i2c_port = TOUCH_I2C_PORT;
+            cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+#ifdef SCREEN_TOUCH_USE_I2C1
+            cfg.pin_sda = I2C_SDA1;
+            cfg.pin_scl = I2C_SCL1;
+#else
+            cfg.pin_sda = I2C_SDA;
+            cfg.pin_scl = I2C_SCL;
+#endif
+            // cfg.freq = 400000;
+
+            _touch_instance.config(cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+#endif
+
+        setPanel(&_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#elif defined(ILI9341_DRIVER)
+
+#include <LovyanGFX.hpp> // Graphics and font library for ILI9341 driver chip
+
+#if defined(ILI9341_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ILI9341_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ILI9341 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = ILI9341_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = TFT_SCLK;            // Set SPI SCLK pin number
+            cfg.pin_mosi = TFT_MOSI;            // Set SPI MOSI pin number
+            cfg.pin_miso = TFT_MISO;            // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = TFT_DC;                // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = TFT_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = TFT_RST;   // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = TFT_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = false;            // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;  // true to invert the brightness of the backlight
+            // cfg.freq = 44100;    // PWM frequency of backlight
+            // cfg.pwm_channel = 1; // PWM channel number to use
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#elif defined(ST7735_CS)
+#include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
+
+static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
+#elif ARCH_PORTDUINO
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_LCD *_panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+
+    lgfx::ITouch *_touch_instance;
+
+  public:
+    LGFX(void)
+    {
+        if (settingsMap[displayPanel] == st7789)
+            _panel_instance = new lgfx::Panel_ST7789;
+        else if (settingsMap[displayPanel] == st7735)
+            _panel_instance = new lgfx::Panel_ST7735;
+        else if (settingsMap[displayPanel] == st7735s)
+            _panel_instance = new lgfx::Panel_ST7735S;
+        auto buscfg = _bus_instance.config();
+        buscfg.spi_mode = 0;
+
+        buscfg.pin_dc = settingsMap[displayDC]; // Set SPI DC pin number (-1 = disable)
+
+        _bus_instance.config(buscfg);            // applies the set value to the bus.
+        _panel_instance->setBus(&_bus_instance); // set the bus on the panel.
+
+        auto cfg = _panel_instance->config(); // Gets a structure for display panel settings.
+        LOG_DEBUG("Height: %d, Width: %d \n", settingsMap[displayHeight], settingsMap[displayWidth]);
+        cfg.pin_cs = settingsMap[displayCS]; // Pin number where CS is connected (-1 = disable)
+        cfg.pin_rst = settingsMap[displayReset];
+        cfg.panel_width = settingsMap[displayWidth];   // actual displayable width
+        cfg.panel_height = settingsMap[displayHeight]; // actual displayable height
+        cfg.offset_x = settingsMap[displayOffsetX];    // Panel offset amount in X direction
+        cfg.offset_y = settingsMap[displayOffsetY];    // Panel offset amount in Y direction
+        cfg.offset_rotation = 0;                       // Rotation direction value offset 0~7 (4~7 is mirrored)
+        cfg.invert = settingsMap[displayInvert];       // Set to true if the light/darkness of the panel is reversed
+
+        _panel_instance->config(cfg);
+
+        // Configure settings for touch  control.
+        if (settingsMap[touchscreenModule]) {
+            if (settingsMap[touchscreenModule] == xpt2046) {
+                _touch_instance = new lgfx::Touch_XPT2046;
+            }
+            auto touch_cfg = _touch_instance->config();
+
+            touch_cfg.pin_cs = settingsMap[touchscreenCS];
+            touch_cfg.x_min = 0;
+            touch_cfg.x_max = settingsMap[displayHeight] - 1;
+            touch_cfg.y_min = 0;
+            touch_cfg.y_max = settingsMap[displayWidth] - 1;
+            touch_cfg.pin_int = settingsMap[touchscreenIRQ];
+            touch_cfg.bus_shared = true;
+            touch_cfg.offset_rotation = 1;
+
+            _touch_instance->config(touch_cfg);
+            _panel_instance->setTouch(_touch_instance);
+        }
+
+        setPanel(_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX *tft = nullptr;
+#endif
+
+#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || ARCH_PORTDUINO
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
-#include <TFT_eSPI.h> // Graphics and font library for ST7735 driver chip
-
-static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup.h
 
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
-#ifdef SCREEN_ROTATE
+    LOG_DEBUG("TFTDisplay!\n");
+#if ARCH_PORTDUINO
+    if (settingsMap[displayRotate]) {
+        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
+    } else {
+        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayWidth], settingsMap[configNames::displayHeight]);
+    }
+
+#elif defined(SCREEN_ROTATE)
     setGeometry(GEOMETRY_RAWMODE, TFT_HEIGHT, TFT_WIDTH);
 #else
     setGeometry(GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
@@ -18,19 +425,26 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 }
 
 // Write the buffer to the display memory
-void TFTDisplay::display(void)
+void TFTDisplay::display(bool fromBlank)
 {
+    if (fromBlank)
+        tft->fillScreen(TFT_BLACK);
+    // tft->clear();
     concurrency::LockGuard g(spiLock);
 
     uint16_t x, y;
 
     for (y = 0; y < displayHeight; y++) {
         for (x = 0; x < displayWidth; x++) {
-            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
             auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
-            auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
-            if (isset != dblbuf_isset) {
-                tft.drawPixel(x, y, isset ? TFT_WHITE : TFT_BLACK);
+            if (!fromBlank) {
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
+                if (isset != dblbuf_isset) {
+                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
+                }
+            } else if (isset) {
+                tft->drawPixel(x, y, TFT_MESH);
             }
         }
     }
@@ -46,8 +460,104 @@ void TFTDisplay::display(void)
 // Send a command to the display (low level function)
 void TFTDisplay::sendCommand(uint8_t com)
 {
-    (void)com;
-    // Drop all commands to device (we just update the buffer)
+    // handle display on/off directly
+    switch (com) {
+    case DISPLAYON: {
+#if ARCH_PORTDUINO
+        display(true);
+        if (settingsMap[displayBacklight] > 0)
+            digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
+#elif defined(ST7735_BACKLIGHT_EN_V03) && defined(TFT_BACKLIGHT_ON)
+        if (heltec_version == 3) {
+            digitalWrite(ST7735_BACKLIGHT_EN_V03, TFT_BACKLIGHT_ON);
+        } else {
+            digitalWrite(ST7735_BACKLIGHT_EN_V05, TFT_BACKLIGHT_ON);
+        }
+#endif
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL_V03
+        if (heltec_version == 3) {
+            digitalWrite(VTFT_CTRL_V03, LOW);
+        } else {
+            digitalWrite(VTFT_CTRL_V05, LOW);
+        }
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, LOW);
+#endif
+
+#ifdef RAK14014
+#elif !defined(M5STACK)
+        tft->setBrightness(128);
+#endif
+        break;
+    }
+    case DISPLAYOFF: {
+#if ARCH_PORTDUINO
+        tft->clear();
+        if (settingsMap[displayBacklight] > 0)
+            digitalWrite(settingsMap[displayBacklight], !TFT_BACKLIGHT_ON);
+#elif defined(ST7735_BACKLIGHT_EN_V03) && defined(TFT_BACKLIGHT_ON)
+        if (heltec_version == 3) {
+            digitalWrite(ST7735_BACKLIGHT_EN_V03, !TFT_BACKLIGHT_ON);
+        } else {
+            digitalWrite(ST7735_BACKLIGHT_EN_V05, !TFT_BACKLIGHT_ON);
+        }
+#endif
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL_V03
+        if (heltec_version == 3) {
+            digitalWrite(VTFT_CTRL_V03, HIGH);
+        } else {
+            digitalWrite(VTFT_CTRL_V05, HIGH);
+        }
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, HIGH);
+#endif
+#ifdef RAK14014
+#elif !defined(M5STACK)
+        tft->setBrightness(0);
+#endif
+        break;
+    }
+    default:
+        break;
+    }
+
+    // Drop all other commands to device (we just update the buffer)
+}
+
+void TFTDisplay::flipScreenVertically()
+{
+#if defined(T_WATCH_S3)
+    LOG_DEBUG("Flip TFT vertically\n"); // T-Watch S3 right-handed orientation
+    tft->setRotation(0);
+#endif
+}
+
+bool TFTDisplay::hasTouch(void)
+{
+#ifdef RAK14014
+#elif !defined(M5STACK)
+    return tft->touch() != nullptr;
+#else
+    return false;
+#endif
+}
+
+bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
+{
+#ifdef RAK14014
+#elif !defined(M5STACK)
+    return tft->getTouch(x, y);
+#else
+    return false;
+#endif
 }
 
 void TFTDisplay::setDetected(uint8_t detected)
@@ -60,25 +570,48 @@ bool TFTDisplay::connect()
 {
     concurrency::LockGuard g(spiLock);
     LOG_INFO("Doing TFT init\n");
+#ifdef RAK14014
+    tft = new TFT_eSPI;
+#else
+    tft = new LGFX;
+#endif
 
 #ifdef TFT_BL
-    digitalWrite(TFT_BL, HIGH);
     pinMode(TFT_BL, OUTPUT);
+    digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
+    // pinMode(PIN_3V3_EN, OUTPUT);
+    // digitalWrite(PIN_3V3_EN, HIGH);
+    LOG_INFO("Power to TFT Backlight\n");
 #endif
 
-#ifdef ST7735_BACKLIGHT_EN
-    digitalWrite(ST7735_BACKLIGHT_EN, HIGH);
-    pinMode(ST7735_BACKLIGHT_EN, OUTPUT);
+#ifdef ST7735_BACKLIGHT_EN_V03
+    if (heltec_version == 3) {
+        pinMode(ST7735_BACKLIGHT_EN_V03, OUTPUT);
+        digitalWrite(ST7735_BACKLIGHT_EN_V03, TFT_BACKLIGHT_ON);
+    } else {
+        pinMode(ST7735_BACKLIGHT_EN_V05, OUTPUT);
+        digitalWrite(ST7735_BACKLIGHT_EN_V05, TFT_BACKLIGHT_ON);
+    }
 #endif
-    tft.init();
-#ifdef M5STACK
-    tft.setRotation(1); // M5Stack has the TFT in landscape
+
+    tft->init();
+
+#if defined(M5STACK)
+    tft->setRotation(0);
+#elif defined(RAK14014)
+    tft->setRotation(1);
+    tft->setSwapBytes(true);
+//    tft->fillScreen(TFT_BLACK);
+#elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
+    tft->setRotation(1); // T-Deck has the TFT in landscape
+#elif defined(T_WATCH_S3)
+    tft->setRotation(2); // T-Watch S3 left-handed orientation
 #else
-    tft.setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
+    tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
-    tft.fillScreen(TFT_BLACK);
-    // tft.drawRect(0, 0, 40, 10, TFT_PURPLE); // wide rectangle in upper left
+    tft->fillScreen(TFT_BLACK);
+
     return true;
 }
 
-#endif
+#endif

src/graphics/TFTDisplay.h

@@ -3,11 +3,10 @@
 #include <OLEDDisplay.h>
 
 /**
- * An adapter class that allows using the TFT_eSPI library as if it was an OLEDDisplay implementation.
+ * An adapter class that allows using the LovyanGFX library as if it was an OLEDDisplay implementation.
  *
  * Remaining TODO:
  * optimize display() to only draw changed pixels (see other OLED subclasses for examples)
- * implement displayOn/displayOff to turn off the TFT device (and backlight)
  * Use the fast NRF52 SPI API rather than the slow standard arduino version
  *
  * turn radio back on - currently with both on spi bus is fucked? or are we leaving chip select asserted?
@@ -21,7 +20,15 @@ class TFTDisplay : public OLEDDisplay
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
     // Write the buffer to the display memory
-    virtual void display(void) override;
+    virtual void display() override { display(false); };
+    virtual void display(bool fromBlank);
+
+    // Turn the display upside down
+    virtual void flipScreenVertically();
+
+    // Touch screen (static handlers)
+    static bool hasTouch(void);
+    static bool getTouch(int16_t *x, int16_t *y);
 
     /**
      * shim to make the abstraction happy
@@ -38,4 +45,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-};
+};