Merge pull request #2072 from meshtastic/hotfix-01

Hotfix for user button not working

.github/workflows/update_protobufs.yml

@@ -17,9 +17,9 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.6-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.6-linux-x86.tar.gz
-          mv nanopb-0.4.6-linux-x86 nanopb-0.4.6
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
+          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
 
       - name: Re-generate protocol buffers
         run: |

.gitignore

@@ -29,3 +29,4 @@ __pycache__
 
 venv/
 release/
+.vscode/extensions.json

arch/esp32/esp32.ini

@@ -26,6 +26,7 @@ build_flags =
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
@@ -33,7 +34,8 @@ lib_deps =
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
-   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32s2.ini

@@ -0,0 +1,47 @@
+[esp32s2_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
+upload_speed = 961200
+monitor_speed = 115200
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags} 
+  -Wall 
+  -Wextra 
+  -Isrc/platform/esp32 
+  -std=c++11 
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial 
+  -DCONFIG_BT_NIMBLE_ENABLED 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DHAS_BLUETOOTH=0
+  -DDEBUG_HEAP 
+  
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
+

arch/esp32/esp32s3.ini

@@ -23,9 +23,10 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial 
   -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING  
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DDEBUG_HEAP 
   
 lib_deps =
   ${arduino_base.lib_deps}
@@ -34,6 +35,7 @@ lib_deps =
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
 
 lib_ignore = 
   segger_rtt

arch/rp2040/rp2040.ini

@@ -1,6 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#5ce1a228e7cae453f366deb8962252b9b7356bbc
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#20c7dbfcfe6677c5305fa28ecf5e3870321cb157
+platform_packages = 
+  earlephilhower/toolchain-rp2040-earlephilhower@^5.100300.221223
 extends = arduino_base
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m

bin/device-install.sh

@@ -45,7 +45,7 @@ shift "$((OPTIND-1))"
     shift
 }
 
-if [ -f "${FILENAME}" ] && [[ "${FILENAME}" != *"update"* ]]; then
+if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}

bin/device-update.sh

@@ -43,7 +43,7 @@ shift "$((OPTIND-1))"
     shift
 }
 
-if [ -f "${FILENAME}" ] && [[ $FILENAME == *"update"* ]]; then
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
 	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
 else

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.6\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto
+cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto

bin/regen-protos.sh

@@ -2,13 +2,13 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.6 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.6"
+echo "prebuilt binaries for your computer into nanopb-0.4.7"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.6/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
+../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
 
 #echo "Regenerating protobuf documentation - if you see an error message"
 #echo "you can ignore it unless doing a new protobuf release to github."

boards/tbeam-s3-core.json

@@ -1,6 +1,6 @@
 {
   "build": {
-    "arduino":{
+    "arduino": {
       "ldscript": "esp32s3_out.ld"
     },
     "core": "esp32",
@@ -8,9 +8,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_DFU_ON_BOOT=1",
-      "-DARDUINO_USB_MSC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
@@ -45,4 +43,4 @@
   },
   "url": "http://www.lilygo.cn/",
   "vendor": "LilyGo"
-}
+}

boards/tlora-t3s3-v1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DLILYGO_T3S3_V1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [
+      [
+        "0X303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "tlora-t3s3-v1"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "LilyGo TLora-T3S3-V1",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "http://www.lilygo.cn/",
+  "vendor": "LilyGo"
+}

platformio.ini

@@ -10,7 +10,6 @@
 ;default_envs = heltec-v2.0
 ;default_envs = heltec-v2.1
 ;default_envs = tlora-v1
-;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
 ;default_envs = tlora-v2-1-1.6
@@ -66,7 +65,8 @@ lib_deps =
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   nanopb/Nanopb@^0.4.6
   erriez/ErriezCRC32@^1.0.1
-  jgromes/RadioLib@^5.5.0
+;  jgromes/RadioLib@^5.5.1
+  https://github.com/jgromes/RadioLib.git#395844922c5d88d5db0481a9c91479931172428d
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -82,6 +82,7 @@ framework = arduino
 lib_deps =
   ${env.lib_deps}
   mprograms/QMC5883LCompass@^1.1.1
+  end2endzone/NonBlockingRTTTL@^1.3.0
   https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#52b5282639d08a8cbd4b748363089eed6102dc76
 
 build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
@@ -106,4 +107,5 @@ lib_deps =
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
-  adafruit/Adafruit LPS2X@^2.0.4
+  adafruit/Adafruit LPS2X@^2.0.4
+  adafruit/Adafruit SHT31 Library@^2.2.0

src/ButtonThread.h

@@ -51,6 +51,7 @@ class ButtonThread : public concurrency::OSThread
         pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
+        userButton.setClickTicks(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
@@ -159,9 +160,21 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
+    #if defined(USE_EINK) && defined(PIN_EINK_EN)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
+    #endif
+    #if defined(GPS_POWER_TOGGLE)
+        if(config.position.gps_enabled)
+        {
+        DEBUG_MSG("Flag set to false for gps power\n");
+        } 
+        else 
+        {
+        DEBUG_MSG("Flag set to true to restore power\n");
+        }
+    config.position.gps_enabled = !(config.position.gps_enabled);
+    doGPSpowersave(config.position.gps_enabled);
+    #endif
     }
 
     static void userButtonMultiPressed()

src/GPSStatus.h

@@ -20,16 +20,19 @@ class GPSStatus : public Status
     bool hasLock = false;     // default to false, until we complete our first read
     bool isConnected = false; // Do we have a GPS we are talking to
 
+    bool isPowerSaving = false; //Are we in power saving state
+
     Position p = Position_init_default;
 
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
     // preferred method
-    GPSStatus(bool hasLock, bool isConnected, const Position &pos) : Status()
+    GPSStatus(bool hasLock, bool isConnected, bool isPowerSaving, const Position &pos) : Status()
     {
         this->hasLock = hasLock;
         this->isConnected = isConnected;
+        this->isPowerSaving = isPowerSaving;
 
         // all-in-one struct copy
         this->p = pos;
@@ -44,6 +47,8 @@ class GPSStatus : public Status
 
     bool getIsConnected() const { return isConnected; }
 
+    bool getIsPowerSaving() const { return isPowerSaving;}
+
     int32_t getLatitude() const
     {
         if (config.position.fixed_position) {
@@ -94,7 +99,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
         DEBUG_MSG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
 #endif
-        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
+        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected || newStatus->isPowerSaving !=isPowerSaving ||
                 newStatus->p.latitude_i != p.latitude_i || newStatus->p.longitude_i != p.longitude_i ||
                 newStatus->p.altitude != p.altitude || newStatus->p.altitude_hae != p.altitude_hae ||
                 newStatus->p.PDOP != p.PDOP || newStatus->p.ground_track != p.ground_track ||

src/Power.cpp

@@ -102,6 +102,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #define ADC_MULTIPLIER 2.0
 #endif
 
+#ifndef BATTERY_SENSE_SAMPLES
+#define BATTERY_SENSE_SAMPLES 30
+#endif
+
 #ifdef BATTERY_PIN
         // Override variant or default ADC_MULTIPLIER if we have the override pref
         float operativeAdcMultiplier = config.power.adc_multiplier_override > 0
@@ -112,16 +116,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-#ifdef BATTERY_SENSE_SAMPLES
 //Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic environment.
             uint32_t raw = 0;
-            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES;i++){
+            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES; i++){
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw/BATTERY_SENSE_SAMPLES;
-#else
-            uint32_t raw = analogRead(BATTERY_PIN);
-#endif
 
             float scaled;
 #ifndef VBAT_RAW_TO_SCALED
@@ -182,6 +182,9 @@ Power::Power() : OSThread("Power")
 {
     statusHandler = {};
     low_voltage_counter = 0;
+#ifdef DEBUG_HEAP
+    lastheap = ESP.getFreeHeap();
+#endif
 }
 
 bool Power::analogInit()
@@ -283,6 +286,12 @@ void Power::readPowerStatus()
         DEBUG_MSG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
+#ifdef DEBUG_HEAP
+        if (lastheap != ESP.getFreeHeap()){
+            DEBUG_MSG("Heap status: %d/%d bytes free (%d), running %d threads\n", ESP.getFreeHeap(), ESP.getHeapSize(), ESP.getFreeHeap() - lastheap , concurrency::mainController.size(false));
+            lastheap = ESP.getFreeHeap();
+        }
+#endif
 
 // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
 // Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
@@ -290,8 +299,12 @@ void Power::readPowerStatus()
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                if (low_voltage_counter > 3)
-                    powerFSM.trigger(EVENT_LOW_BATTERY);
+                DEBUG_MSG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                if (low_voltage_counter > 10) {
+                    // We can't trigger deep sleep on NRF52, it's freezing the board
+                    //powerFSM.trigger(EVENT_LOW_BATTERY);
+                    DEBUG_MSG("Low voltage detected, but not triggering deep sleep\n");
+                }
             } else {
                 low_voltage_counter = 0;
             }
@@ -455,6 +468,9 @@ bool Power::axpChipInit()
         // Set constant current charging current
         PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
 
+        //Set up the charging voltage
+        PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
+
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         // t-beam s3 core 
@@ -507,6 +523,8 @@ bool Power::axpChipInit()
         //Set the constant current charging current of AXP2101, temporarily use 500mA by default
         PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
 
+        //Set up the charging voltage
+        PMU->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
     }
     
 
@@ -559,14 +577,15 @@ bool Power::axpChipInit()
     }
     DEBUG_MSG("=======================================================================\n");
 
-
-    //Set up the charging voltage, AXP2101/AXP192 4.2V gear is the same
-    // XPOWERS_AXP192_CHG_VOL_4V2 = XPOWERS_AXP2101_CHG_VOL_4V2
-    PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
+// We can safely ignore this approach for most (or all) boards because MCU turned off
+// earlier than battery discharged to 2.6V.
+//
+// Unfortanly for now we can't use this killswitch for RAK4630-based boards because they have a bug with
+// battery voltage measurement. Probably it sometimes drops to low values.
+#ifndef RAK4630
     // Set PMU shutdown voltage at 2.6V to maximize battery utilization
     PMU->setSysPowerDownVoltage(2600);
-
+#endif
 
 
 #ifdef PMU_IRQ

src/PowerFSM.cpp

@@ -34,7 +34,7 @@ static void sdsEnter()
 {
     DEBUG_MSG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(config.power.sds_secs * 1000);
+    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
 }
 
 extern Power *power;
@@ -324,31 +324,22 @@ void PowerFSM_setup()
 
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
-    // each time we get a new update packet make sure we are staying in the ON state so the screen stays awake (also we don't
-    // shutdown bluetooth if is_router)
-    powerFSM.add_transition(&stateDARK, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
-
     powerFSM.add_timed_transition(&stateON, &stateDARK, getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL, "Screen-on timeout");
 
-    // On most boards we use light-sleep to be our main state, but on NRF52 we just stay in DARK
-    State *lowPowerState = &stateLS;
-
 #ifdef ARCH_ESP32
+    State *lowPowerState = &stateLS;
     // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
     // See: https://github.com/meshtastic/firmware/issues/1071
     if (isRouter || config.power.is_power_saving) {
         powerFSM.add_timed_transition(&stateNB, &stateLS, getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout");
         powerFSM.add_timed_transition(&stateDARK, &stateLS, getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL, "Bluetooth timeout");
-    } 
-
-#elif defined (ARCH_NRF52)
-    lowPowerState = &stateDARK;
-#endif
+    }
 
     if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, config.power.sds_secs * 1000, NULL, "mesh timeout");
+        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL, "mesh timeout");
+#endif
+
 
     powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/PowerFSMThread.h

@@ -26,11 +26,9 @@ class PowerFSMThread : public OSThread
 
         if (powerStatus->getHasUSB()) {
             timeLastPowered = millis();
-        } else if (config.power.on_battery_shutdown_after_secs > 0 &&
-                   millis() >
-                       timeLastPowered +
-                           (1000 *
-                            config.power.on_battery_shutdown_after_secs)) { // shutdown after 30 minutes unpowered
+        } else if (config.power.on_battery_shutdown_after_secs > 0 && 
+            config.power.on_battery_shutdown_after_secs != UINT32_MAX && 
+            millis() > (timeLastPowered + getConfiguredOrDefaultMs(config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 

src/SerialConsole.cpp

@@ -25,7 +25,7 @@ void consolePrintf(const char *format, ...)
 #endif
 }
 
-SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port)
+SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
     assert(!console);
     console = this;
@@ -46,6 +46,10 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port)
     emitRebooted();
 }
 
+int32_t SerialConsole::runOnce()
+{
+    return runOncePart();
+}
 
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()

src/SerialConsole.h

@@ -6,7 +6,7 @@
  * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs
  * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs).
  */
-class SerialConsole : public StreamAPI, public RedirectablePrint
+class SerialConsole : public StreamAPI, public RedirectablePrint, private concurrency::OSThread
 {
   public:
     SerialConsole();
@@ -24,6 +24,8 @@ class SerialConsole : public StreamAPI, public RedirectablePrint
         return RedirectablePrint::write(c);
     }
 
+    virtual int32_t runOnce() override;
+
   protected:
 
     /// Check the current underlying physical link to see if the client is currently connected

src/airtime.cpp

@@ -117,6 +117,20 @@ float AirTime::utilizationTXPercent()
     return (float(sum) / float(MS_IN_HOUR)) * 100;
 }
 
+// Get the amount of minutes we have to be silent before we can send again
+uint8_t AirTime::getSilentMinutes(float txPercent, float dutyCycle) 
+{  
+  float newTxPercent = txPercent;
+  for (int8_t i = MINUTES_IN_HOUR-1; i >= 0; --i) {
+      newTxPercent -= ((float)this->utilizationTX[i] / (MS_IN_MINUTE * MINUTES_IN_HOUR / 100));
+      if (newTxPercent < dutyCycle) 
+          return MINUTES_IN_HOUR-1-i;
+  }
+
+  return MINUTES_IN_HOUR;
+}
+
+
 AirTime::AirTime() : concurrency::OSThread("AirTime"),airtimes({}) {
 }
 

src/airtime.h

@@ -29,6 +29,7 @@
 #define PERIODS_TO_LOG 8
 #define MINUTES_IN_HOUR 60
 #define SECONDS_IN_MINUTE 60
+#define MS_IN_MINUTE (SECONDS_IN_MINUTE * 1000)
 #define MS_IN_HOUR (MINUTES_IN_HOUR * SECONDS_IN_MINUTE * 1000)
 
 
@@ -57,6 +58,7 @@ class AirTime : private concurrency::OSThread
     uint32_t getSecondsPerPeriod();
     uint32_t getSecondsSinceBoot();
     uint32_t *airtimeReport(reportTypes reportType);
+    uint8_t getSilentMinutes(float txPercent, float dutyCycle);
 
   private:
     bool firstTime = true;

src/configuration.h

@@ -114,6 +114,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
+#define SHT31_ADDR 0x44
 
 // -----------------------------------------------------------------------------
 // Security

src/detect/i2cScan.h

@@ -191,6 +191,10 @@ void scanI2Cdevice()
                 nodeTelemetrySensorsMap[TelemetrySensorType_MCP9808] = addr;
                 DEBUG_MSG("MCP9808 sensor found\n");
             }
+            if (addr == SHT31_ADDR) {
+                DEBUG_MSG("SHT31 sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_SHT31] = addr;
+            }
             if (addr == SHTC3_ADDR) {
                 DEBUG_MSG("SHTC3 sensor found\n");
                 nodeTelemetrySensorsMap[TelemetrySensorType_SHTC3] = addr;

src/gps/GPS.cpp

@@ -270,21 +270,30 @@ bool GPS::setup()
     pinMode(PIN_GPS_EN, OUTPUT);
 #endif
 
+#ifdef HAS_PMU
+if(config.position.gps_enabled){
+    setGPSPower(true);
+}
+#endif
+
 #ifdef PIN_GPS_RESET
     digitalWrite(PIN_GPS_RESET, 1); // assert for 10ms
     pinMode(PIN_GPS_RESET, OUTPUT);
     delay(10);
     digitalWrite(PIN_GPS_RESET, 0);
 #endif
-
     setAwake(true); // Wake GPS power before doing any init
     bool ok = setupGPS();
 
     if (ok) {
         notifySleepObserver.observe(&notifySleep);
         notifyDeepSleepObserver.observe(&notifyDeepSleep);
+        notifyGPSSleepObserver.observe(&notifyGPSSleep);
+    }
+    if (config.position.gps_enabled==false) {
+        setAwake(false);
+        doGPSpowersave(false);
     }
-
     return ok;
 }
 
@@ -293,6 +302,7 @@ GPS::~GPS()
     // we really should unregister our sleep observer
     notifySleepObserver.unobserve(&notifySleep);
     notifyDeepSleepObserver.unobserve(&notifyDeepSleep);
+    notifyGPSSleepObserver.observe(&notifyGPSSleep);
 }
 
 bool GPS::hasLock()
@@ -405,7 +415,7 @@ void GPS::publishUpdate()
         DEBUG_MSG("publishing pos@%x:2, hasVal=%d, GPSlock=%d\n", p.timestamp, hasValidLocation, hasLock());
 
         // Notify any status instances that are observing us
-        const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), p);
+        const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), isPowerSaving(), p);
         newStatus.notifyObservers(&status);
     }
 }
@@ -416,7 +426,7 @@ int32_t GPS::runOnce()
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
-        if(gnssModel == GNSS_MODEL_UBLOX){
+        if((config.position.gps_enabled == 1) && (gnssModel == GNSS_MODEL_UBLOX)){
             // reset the GPS on next bootup
             if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
                 DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
@@ -518,6 +528,7 @@ int GPS::prepareDeepSleep(void *unused)
     DEBUG_MSG("GPS deep sleep!\n");
 
     // For deep sleep we also want abandon any lock attempts (because we want minimum power)
+    getSleepTime();
     setAwake(false);
 
     return 0;
@@ -653,6 +664,11 @@ GPS *createGps()
             return new_gps;
         }
     }
+    else{
+        GPS *new_gps = new NMEAGPS();
+        new_gps->setup();
+        return new_gps;
+    }
     return nullptr;
 #endif
 }

src/gps/GPS.h

@@ -49,6 +49,7 @@ class GPS : private concurrency::OSThread
 
     CallbackObserver<GPS, void *> notifySleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareSleep);
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
+    CallbackObserver<GPS, void *> notifyGPSSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
@@ -77,6 +78,8 @@ class GPS : private concurrency::OSThread
     /// Return true if we are connected to a GPS
     bool isConnected() const { return hasGPS; }
 
+    bool isPowerSaving() const { return !config.position.gps_enabled;}
+
     /**
      * Restart our lock attempt - try to get and broadcast a GPS reading ASAP
      * called after the CPU wakes from light-sleep state

src/graphics/Screen.cpp

@@ -35,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "mesh/Channels.h"
 #include "mesh/generated/deviceonly.pb.h"
 #include "modules/TextMessageModule.h"
+#include "modules/ExternalNotificationModule.h"
 #include "sleep.h"
 #include "target_specific.h"
 #include "utils.h"
@@ -42,6 +43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #include "mesh/http/WiFiAPClient.h"
+#include "modules/esp32/StoreForwardModule.h"
 #endif
 
 #ifdef OLED_RU
@@ -95,17 +97,17 @@ static uint16_t displayWidth, displayHeight;
 
 #if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
 // The screen is bigger so use bigger fonts
-#define FONT_SMALL ArialMT_Plain_16
-#define FONT_MEDIUM ArialMT_Plain_24
-#define FONT_LARGE ArialMT_Plain_24
+#define FONT_SMALL ArialMT_Plain_16 // Height: 19
+#define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
+#define FONT_LARGE ArialMT_Plain_24 // Height: 28
 #else
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
-#define FONT_SMALL ArialMT_Plain_10
+#define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
-#define FONT_MEDIUM ArialMT_Plain_16
-#define FONT_LARGE ArialMT_Plain_24
+#define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
+#define FONT_LARGE ArialMT_Plain_24 // Height: 28
 #endif
 
 #define fontHeight(font) ((font)[1] + 1) // height is position 1
@@ -329,11 +331,8 @@ static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, i
     display->drawString(64 + x, y, "Updating");
 
     display->setFont(FONT_SMALL);
-    if ((millis() / 1000) % 2) {
-        display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Please wait . . .");
-    } else {
-        display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Please wait . .  ");
-    }
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->drawStringMaxWidth(0 + x, 2 + y + FONT_HEIGHT_SMALL *2, x + display->getWidth(), "Please be patient and do not power off.");
 }
 
 /// Draw the last text message we received
@@ -364,6 +363,9 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
 {
     displayedNodeNum = 0; // Not currently showing a node pane
 
+    // the max length of this buffer is much longer than we can possibly print
+    static char tempBuf[237];
+
     MeshPacket &mp = devicestate.rx_text_message;
     NodeInfo *node = nodeDB.getNode(getFrom(&mp));
     // DEBUG_MSG("drawing text message from 0x%x: %s\n", mp.from,
@@ -373,16 +375,14 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     // with the third parameter you can define the width after which words will
     // be wrapped. Currently only spaces and "-" are allowed for wrapping
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-    display->setFont(FONT_MEDIUM);
-    String sender = (node && node->has_user) ? node->user.short_name : "???";
-    display->drawString(0 + x, 0 + y, sender);
     display->setFont(FONT_SMALL);
-
-    // the max length of this buffer is much longer than we can possibly print
-    static char tempBuf[96];
-    snprintf(tempBuf, sizeof(tempBuf), "         %s", mp.decoded.payload.bytes);
-
-    display->drawStringMaxWidth(4 + x, 10 + y, SCREEN_WIDTH - (6 + x), tempBuf);
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+    display->drawStringf(0 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+    display->drawStringf(1 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+    display->setColor(WHITE);
+    snprintf(tempBuf, sizeof(tempBuf), "%s", mp.decoded.payload.bytes);
+    display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
 }
 
 /// Draw a series of fields in a column, wrapping to multiple colums if needed
@@ -395,6 +395,10 @@ static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char *
     int xo = x, yo = y;
     while (*f) {
         display->drawString(xo, yo, *f);
+        if (display->getColor() == BLACK)
+            display->drawString(xo + 1, yo, *f);
+
+        display->setColor(WHITE);
         yo += FONT_HEIGHT_SMALL;
         if (yo > SCREEN_HEIGHT - FONT_HEIGHT_SMALL) {
             xo += SCREEN_WIDTH / 2;
@@ -463,8 +467,13 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, NodeStatus *no
 {
     char usersString[20];
     sprintf(usersString, "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+    display->drawFastImage(x, y + 3, 8, 8, imgUser);
+#else
     display->drawFastImage(x, y, 8, 8, imgUser);
+#endif
     display->drawString(x + 10, y - 2, usersString);
+    display->drawString(x + 11, y - 2, usersString);
 }
 
 // Draw GPS status summary
@@ -473,15 +482,18 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
     if (config.position.fixed_position) {
         // GPS coordinates are currently fixed
         display->drawString(x - 1, y - 2, "Fixed GPS");
+        display->drawString(x, y - 2, "Fixed GPS");
         return;
     }
     if (!gps->getIsConnected()) {
         display->drawString(x, y - 2, "No GPS");
+        display->drawString(x + 1, y - 2, "No GPS");
         return;
     }
     display->drawFastImage(x, y, 6, 8, gps->getHasLock() ? imgPositionSolid : imgPositionEmpty);
     if (!gps->getHasLock()) {
         display->drawString(x + 8, y - 2, "No sats");
+        display->drawString(x + 9, y - 2, "No sats");
         return;
     } else {
         char satsString[3];
@@ -506,6 +518,23 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
     }
 }
 
+//Draw status when gps is disabled by PMU
+static void drawGPSpowerstat(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
+{
+#ifdef HAS_PMU    
+    String displayLine = "GPS disabled";
+    int16_t xPos = display->getStringWidth(displayLine);
+
+    if (!config.position.gps_enabled){
+        display->drawString(x + xPos, y, displayLine);
+#ifdef GPS_POWER_TOGGLE 
+        display->drawString(x + xPos, y - 2 + FONT_HEIGHT_SMALL, " by button");
+#endif
+        //display->drawString(x + xPos, y + 2, displayLine);
+    }
+#endif
+}
+
 static void drawGPSAltitude(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
 {
     String displayLine = "";
@@ -669,16 +698,16 @@ static uint16_t getCompassDiam(OLEDDisplay *display)
 {
     uint16_t diam = 0;
     // get the smaller of the 2 dimensions and subtract 20
-    if(display->getWidth() > display->getHeight()) {
-        diam = display->getHeight();
+    if(display->getWidth() > (display->getHeight() - FONT_HEIGHT_SMALL)) {
+        diam = display->getHeight() - FONT_HEIGHT_SMALL;
         // if 2/3 of the other size would be smaller, use that
         if (diam > (display->getWidth() * 2 / 3)) {
             diam = display->getWidth() * 2 / 3;
         }
     } else {
         diam = display->getWidth();
-        if (diam > (display->getHeight() * 2 / 3)) {
-            diam = display->getHeight() * 2 / 3;
+        if (diam > ((display->getHeight() - FONT_HEIGHT_SMALL) * 2 / 3)) {
+            diam = (display->getHeight() - FONT_HEIGHT_SMALL) * 2 / 3;
         }
     }
     
@@ -758,6 +787,8 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+
     const char *username = node->has_user ? node->user.long_name : "Unknown Name";
 
     static char signalStr[20];
@@ -788,7 +819,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     const char *fields[] = {username, distStr, signalStr, lastStr, NULL};
 
     // coordinates for the center of the compass/circle
-    int16_t compassX = x + SCREEN_WIDTH - getCompassDiam(display) / 2 - 5, compassY = y + SCREEN_HEIGHT / 2;
+    int16_t compassX = x + SCREEN_WIDTH - getCompassDiam(display) / 2 - 5, compassY = y + FONT_HEIGHT_SMALL + (SCREEN_HEIGHT - FONT_HEIGHT_SMALL) / 2;
     bool hasNodeHeading = false;
 
     if (ourNode && hasPosition(ourNode)) {
@@ -831,33 +862,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
         display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
     display->drawCircle(compassX, compassY, getCompassDiam(display) / 2);
 
+    display->setColor(BLACK);
     // Must be after distStr is populated
     drawColumns(display, x, y, fields);
 }
 
-#if 0
-void _screen_header()
-{
-    if (!disp)
-        return;
-
-    // Message count
-    //snprintf(buffer, sizeof(buffer), "#%03d", ttn_get_count() % 1000);
-    //display->setTextAlignment(TEXT_ALIGN_LEFT);
-    //display->drawString(0, 2, buffer);
-
-    // Datetime
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(display->getWidth()/2, 2, gps.getTimeStr());
-
-    // Satellite count
-    display->setTextAlignment(TEXT_ALIGN_RIGHT);
-    char buffer[10];
-    display->drawString(display->getWidth() - SATELLITE_IMAGE_WIDTH - 4, 2, itoa(gps.satellites.value(), buffer, 10));
-    display->drawXbm(display->getWidth() - SATELLITE_IMAGE_WIDTH, 0, SATELLITE_IMAGE_WIDTH, SATELLITE_IMAGE_HEIGHT, SATELLITE_IMAGE);
-}
-#endif
-
 // #ifdef RAK4630
 // Screen::Screen(uint8_t address, int sda, int scl) : OSThread("Screen"), cmdQueue(32), dispdev(address, sda, scl),
 // dispdev_oled(address, sda, scl), ui(&dispdev)
@@ -1062,7 +1071,13 @@ int32_t Screen::runOnce()
             handleSetOn(false);
             break;
         case Cmd::ON_PRESS:
-            handleOnPress();
+            // If a nag notification is running, stop it
+            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
+                externalNotificationModule->stopNow();
+            } else {
+                // Don't advance the screen if we just wanted to switch off the nag notification
+                handleOnPress();
+            }
             break;
         case Cmd::START_BLUETOOTH_PIN_SCREEN:
             handleStartBluetoothPinScreen(cmd.bluetooth_pin);
@@ -1357,6 +1372,9 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
     char channelStr[20];
     {
         concurrency::LockGuard guard(&lock);
@@ -1366,18 +1384,54 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     // Display power status
     if (powerStatus->getHasBattery())
-        drawBattery(display, x, y + 2, imgBattery, powerStatus);
+        drawBattery(display, x + 1, y + 3, imgBattery, powerStatus);
     else if (powerStatus->knowsUSB())
-        display->drawFastImage(x, y + 2, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
+        display->drawFastImage(x + 1, y + 3, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
     // Display nodes status
-    drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 2, nodeStatus);
+    drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 3, nodeStatus);
     // Display GPS status
-    drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
+    if (!config.position.gps_enabled){
+        int16_t yPos = y + 2;
+#ifdef GPS_POWER_TOGGLE
+        yPos = (y + 10 + FONT_HEIGHT_SMALL);
+#endif
+        drawGPSpowerstat(display, x, yPos, gpsStatus);
+    } else {
+        drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
+        drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 3, gpsStatus);
+    }
 
+    display->setColor(WHITE);
     // Draw the channel name
     display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
-    // Draw our hardware ID to assist with bluetooth pairing
-    display->drawFastImage(x + SCREEN_WIDTH - (10) - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgInfo);
+    // Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
+    if (moduleConfig.store_forward.enabled) {
+#ifdef ARCH_ESP32        
+        if (millis() - storeForwardModule->lastHeartbeat > (storeForwardModule->heartbeatInterval * 1200)) { //no heartbeat, overlap a bit
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgQuestionL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8, imgQuestionL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgQuestion);
+#endif
+        } else {
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8, imgSFL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 16, 8, imgSFL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 13 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 11, 8, imgSF);
+#endif
+        }
+#endif        
+    } else {
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgInfoL1);
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8, imgInfoL2);
+#else
+        display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgInfo);
+#endif
+    }
+
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(ourId), y + FONT_HEIGHT_SMALL, ourId);
 
     // Draw any log messages
@@ -1404,15 +1458,24 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
     if (WiFi.status() != WL_CONNECTED) {
         display->drawString(x, y, String("WiFi: Not Connected"));
+        display->drawString(x + 1, y, String("WiFi: Not Connected"));
     } else {
         display->drawString(x, y, String("WiFi: Connected"));
+        display->drawString(x + 1, y, String("WiFi: Connected"));
 
         display->drawString(x + SCREEN_WIDTH - display->getStringWidth("RSSI " + String(WiFi.RSSI())), y,
                             "RSSI " + String(WiFi.RSSI()));
+        display->drawString(x + SCREEN_WIDTH - display->getStringWidth("RSSI " + String(WiFi.RSSI())) - 1, y,
+                            "RSSI " + String(WiFi.RSSI()));
     }
 
+        display->setColor(WHITE);
+
     /*
     - WL_CONNECTED: assigned when connected to a WiFi network;
     - WL_NO_SSID_AVAIL: assigned when no SSID are available;
@@ -1521,6 +1584,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
     char batStr[20];
     if (powerStatus->getHasBattery()) {
         int batV = powerStatus->getBatteryVoltageMv() / 1000;
@@ -1531,9 +1597,11 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
         // Line 1
         display->drawString(x, y, batStr);
+        display->drawString(x + 1, y, batStr);
     } else {
         // Line 1
         display->drawString(x, y, String("USB"));
+        display->drawString(x + 1, y, String("USB"));
     }
 
     auto mode = "";
@@ -1566,6 +1634,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     }
 
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
 
     // Line 2
     uint32_t currentMillis = millis();
@@ -1578,6 +1647,8 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // minutes %= 60;
     // hours %= 24;
 
+    display->setColor(WHITE);
+
     // Show uptime as days, hours, minutes OR seconds
     String uptime;
     if (days >= 2)
@@ -1613,7 +1684,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     char chUtil[13];
     sprintf(chUtil, "ChUtil %2.0f%%", airTime->channelUtilizationPercent());
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(chUtil), y + FONT_HEIGHT_SMALL * 1, chUtil);
-
+if (config.position.gps_enabled) {
     // Line 3
     if (config.display.gps_format !=
         Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
@@ -1621,7 +1692,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
     // Line 4
     drawGPScoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
-
+} else {
+    drawGPSpowerstat(display, x - (SCREEN_WIDTH / 4), y + FONT_HEIGHT_SMALL * 2, gpsStatus);
+}
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)

src/graphics/Screen.h

@@ -21,6 +21,7 @@ class Screen
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
     void startRebootScreen() {}
+    void startFirmwareUpdateScreen() {}
 };
 }
 

src/graphics/images.h

@@ -12,36 +12,18 @@ const uint8_t imgPower[] PROGMEM =         { 0x40, 0x40, 0x40, 0x58, 0x48, 0x08,
 const uint8_t imgUser[] PROGMEM =          { 0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3C };
 const uint8_t imgPositionEmpty[] PROGMEM = { 0x20, 0x30, 0x28, 0x24, 0x42, 0xFF };
 const uint8_t imgPositionSolid[] PROGMEM = { 0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF };
-const uint8_t imgInfo[] PROGMEM =          { 0xFF, 0x81, 0x81, 0xB5, 0xB5, 0x81, 0x81, 0xFF }; 
 
-#include "img/icon.xbm"
-
-// We now programmatically draw our compass
-#if 0
-const
-#include "img/compass.xbm"
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+const uint8_t imgQuestionL1[] PROGMEM =        { 0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff };
+const uint8_t imgQuestionL2[] PROGMEM =        { 0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f };
+const uint8_t imgInfoL1[] PROGMEM =        { 0xff, 0x01, 0x01, 0x01, 0x1e, 0x7f, 0x1e, 0x01, 0x01, 0x01, 0x01, 0xff };
+const uint8_t imgInfoL2[] PROGMEM =        { 0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f };
+const uint8_t imgSFL1[] PROGMEM =          { 0xb6, 0x8f, 0x19, 0x11, 0x31, 0xe3, 0xc2, 0x01, 0x01, 0xf9, 0xf9, 0x89, 0x89, 0x89, 0x09, 0xeb};
+const uint8_t imgSFL2[] PROGMEM =          { 0x0e, 0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x00, 0x0f, 0x0f, 0x00, 0x08, 0x08, 0x08, 0x0f};
+#else
+const uint8_t imgInfo[] PROGMEM =          { 0xff, 0x81, 0x00, 0xfb, 0xfb, 0x00, 0x81, 0xff };
+const uint8_t imgQuestion[] PROGMEM =      { 0xbf, 0x41, 0xc0, 0x8b, 0xdb, 0x70, 0xa1, 0xdf };
+const uint8_t imgSF[] PROGMEM =            { 0xd2, 0xb7, 0xad, 0xbb, 0x92, 0x01, 0xfd, 0xfd, 0x15, 0x85, 0xf5};
 #endif
 
-#if 0
-const uint8_t activeSymbol[] PROGMEM = {
-    B00000000,
-    B00000000,
-    B00011000,
-    B00100100,
-    B01000010,
-    B01000010,
-    B00100100,
-    B00011000
-};
-
-const uint8_t inactiveSymbol[] PROGMEM = {
-    B00000000,
-    B00000000,
-    B00000000,
-    B00000000,
-    B00011000,
-    B00011000,
-    B00000000,
-    B00000000
-};
-#endif
+#include "img/icon.xbm"

src/graphics/img/compass.xbm

@@ -1,28 +0,0 @@
-#define compass_width 48
-#define compass_height 48
-static char compass_bits[] = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x01, 0x00, 
-  0x00, 0xC0, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0x00, 
-  0x00, 0xF8, 0xFF, 0xFF, 0x1F, 0x00, 0x00, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 
-  0x00, 0xFE, 0x01, 0x80, 0x7F, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x7F, 0x00, 
-  0x00, 0x7F, 0x00, 0x00, 0xFE, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xFC, 0x01, 
-  0x80, 0x1F, 0x00, 0x00, 0xF8, 0x01, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x01, 
-  0xC0, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 
-  0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x0F, 0x00, 0x00, 0xF0, 0x03, 
-  0x80, 0x0F, 0x00, 0x00, 0xF0, 0x01, 0x80, 0x1F, 0x00, 0x00, 0xF8, 0x01, 
-  0x80, 0x3F, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x7F, 0x00, 0x00, 0xFE, 0x00, 
-  0x00, 0xFE, 0x00, 0x00, 0x7F, 0x00, 0x00, 0xFE, 0x01, 0x80, 0x7F, 0x00, 
-  0x00, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 0x00, 0xF8, 0xFF, 0xFF, 0x1F, 0x00, 
-  0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x03, 0x00, 
-  0x00, 0x80, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
-  };

src/graphics/img/pin.xbm

@@ -1,6 +0,0 @@
-#define pin_width 13
-#define pin_height 13
-static char pin_bits[] = {
-  0x00, 0x00, 0xF0, 0x01, 0xF8, 0x03, 0xFC, 0x07, 0xBC, 0x07, 0xBC, 0x07, 
-  0xFC, 0x07, 0xF8, 0x03, 0xF8, 0x03, 0xF0, 0x01, 0xE0, 0x00, 0xE0, 0x00, 
-  0x00, 0x00, };

src/main.cpp

@@ -8,8 +8,6 @@
 #include "configuration.h"
 #include "error.h"
 #include "power.h"
-// #include "rom/rtc.h"
-//#include "DSRRouter.h"
 #include "ReliableRouter.h"
 // #include "debug.h"
 #include "FSCommon.h"
@@ -217,7 +215,6 @@ void setup()
 
     fsInit();
 
-    // router = new DSRRouter();
     router = new ReliableRouter();
 
 #ifdef I2C_SDA1
@@ -245,7 +242,6 @@ void setup()
     digitalWrite(PIN_3V3_EN, 1);
 #endif
 
-
     // Currently only the tbeam has a PMU
     // PMU initialization needs to be placed before scanI2Cdevice
     power = new Power();
@@ -387,7 +383,7 @@ void setup()
     }
 #endif
 
-#if defined(USE_SX1280) && !defined(ARCH_PORTDUINO)
+#if defined(USE_SX1280)
     if (!rIf) {
         rIf = new SX1280Interface(SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY, SPI);
         if (!rIf->init()) {
@@ -452,6 +448,19 @@ void setup()
     }
 #endif
 
+// check if the radio chip matches the selected region
+
+if((config.lora.region == Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())){
+    DEBUG_MSG("Warning: Radio chip does not support 2.4GHz LoRa. Reverting to unset.\n");
+    config.lora.region = Config_LoRaConfig_RegionCode_UNSET;
+    nodeDB.saveToDisk(SEGMENT_CONFIG);
+    if(!rIf->reconfigure()) {
+        DEBUG_MSG("Reconfigure failed, rebooting\n");
+        screen->startRebootScreen();
+        rebootAtMsec = millis() + 5000;
+    }
+}
+
 #if HAS_WIFI || HAS_ETHERNET
     mqttInit();
 #endif

src/mesh/Channels.cpp

@@ -196,6 +196,17 @@ Channel &Channels::getByIndex(ChannelIndex chIndex)
     return *ch;
 }
 
+Channel &Channels::getByName(const char* chName)
+{
+    for (ChannelIndex i = 0; i < getNumChannels(); i++) {
+        if (strcasecmp(channelFile.channels[i].settings.name, chName) == 0) {
+            return channelFile.channels[i];
+        }
+    }
+
+    return getByIndex(getPrimaryIndex());
+}
+
 void Channels::setChannel(const Channel &c)
 {
     Channel &old = getByIndex(c.index);

src/mesh/Channels.h

@@ -40,6 +40,9 @@ class Channels
     /** Return the Channel for a specified index */
     Channel &getByIndex(ChannelIndex chIndex);
 
+     /** Return the Channel for a specified name, return primary if not found. */
+    Channel &getByName(const char* chName);
+
     /** Using the index inside the channel, update the specified channel's settings and role.  If this channel is being promoted
      * to be primary, force all other channels to be secondary.
      */

src/mesh/FloodingRouter.cpp

@@ -17,7 +17,7 @@ ErrorCode FloodingRouter::send(MeshPacket *p)
     return Router::send(p);
 }
 
-bool FloodingRouter::shouldFilterReceived(MeshPacket *p)
+bool FloodingRouter::shouldFilterReceived(const MeshPacket *p)
 {
     if (wasSeenRecently(p)) { // Note: this will also add a recent packet record
         printPacket("Ignoring incoming msg, because we've already seen it", p);
@@ -34,13 +34,19 @@ void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
         // do not flood direct message that is ACKed 
         DEBUG_MSG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
         Router::cancelSending(p->to, p->decoded.request_id);   // cancel rebroadcast for this DM
-    } else if ((p->to != getNodeNum()) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
+    } 
+    if ((p->to != getNodeNum()) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
         if (p->id != 0) {
             if (config.device.role != Config_DeviceConfig_Role_CLIENT_MUTE) {
                 MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
 
                 tosend->hop_limit--; // bump down the hop count
 
+                // If it is a traceRoute request, update the route that it went via me
+                if (p->which_payload_variant == MeshPacket_decoded_tag && traceRouteModule->wantPacket(p)) {
+                    traceRouteModule->updateRoute(tosend);
+                }
+
                 printPacket("Rebroadcasting received floodmsg to neighbors", p);
                 // Note: we are careful to resend using the original senders node id
                 // We are careful not to call our hooked version of send() - because we don't want to check this again

src/mesh/FloodingRouter.h

@@ -2,6 +2,7 @@
 
 #include "PacketHistory.h"
 #include "Router.h"
+#include "modules/TraceRouteModule.h"
 
 /**
  * This is a mixin that extends Router with the ability to do Naive Flooding (in the standard mesh protocol sense)
@@ -50,7 +51,7 @@ class FloodingRouter : public Router, protected PacketHistory
      * Called immedately on receiption, before any further processing.
      * @return true to abandon the packet
      */
-    virtual bool shouldFilterReceived(MeshPacket *p) override;
+    virtual bool shouldFilterReceived(const MeshPacket *p) override;
 
     /**
      * Look for broadcasts we need to rebroadcast

src/mesh/InterfacesTemplates.cpp

@@ -7,7 +7,4 @@
 template class SX126xInterface<SX1262>;
 template class SX126xInterface<SX1268>;
 template class SX126xInterface<LLCC68>;
-
-#if defined(RADIOLIB_GODMODE)
 template class SX128xInterface<SX1280>;
-#endif

src/mesh/MeshModule.cpp

@@ -44,11 +44,11 @@ MeshPacket *MeshModule::allocAckNak(Routing_Error err, NodeNum to, PacketId idFr
     // auto p = allocDataProtobuf(c);
     MeshPacket *p = router->allocForSending();
     p->decoded.portnum = PortNum_ROUTING_APP;
-    p->decoded.payload.size = pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes), Routing_fields, &c);
+    p->decoded.payload.size = pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes), &Routing_msg, &c);
 
     p->priority = MeshPacket_Priority_ACK;
 
-    p->hop_limit = 0; // Assume just immediate neighbors for now
+    p->hop_limit = config.lora.hop_limit; // Flood ACK back to original sender
     p->to = to;
     p->decoded.request_id = idFrom;
     p->channel = chIndex;

src/mesh/NodeDB.cpp

@@ -162,6 +162,7 @@ void NodeDB::installDefaultConfig()
     config.has_network = true;
     config.has_bluetooth = true;
     config.lora.tx_enabled = true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
+    config.lora.override_duty_cycle = false; 
     config.lora.region = Config_LoRaConfig_RegionCode_UNSET;
     config.lora.modem_preset = Config_LoRaConfig_ModemPreset_LONG_FAST;
     config.lora.hop_limit = HOP_RELIABLE;
@@ -214,9 +215,9 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_external_notification = true;
     moduleConfig.has_canned_message = true;
 
-    strncpy(moduleConfig.mqtt.address, default_mqtt_address, sizeof(default_mqtt_address));
-    strncpy(moduleConfig.mqtt.username, default_mqtt_username, sizeof(default_mqtt_username));
-    strncpy(moduleConfig.mqtt.password, default_mqtt_password, sizeof(default_mqtt_password));
+    strncpy(moduleConfig.mqtt.address, default_mqtt_address, sizeof(moduleConfig.mqtt.address));
+    strncpy(moduleConfig.mqtt.username, default_mqtt_username, sizeof(moduleConfig.mqtt.username));
+    strncpy(moduleConfig.mqtt.password, default_mqtt_password, sizeof(moduleConfig.mqtt.password));
 
     initModuleConfigIntervals();
 }
@@ -400,7 +401,7 @@ bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_
 void NodeDB::loadFromDisk()
 {
     // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
-    if (!loadProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate)) {
+    if (!loadProto(prefFileName, DeviceState_size, sizeof(DeviceState), &DeviceState_msg, &devicestate)) {
         installDefaultDeviceState(); // Our in RAM copy might now be corrupt
     } else {
         if (devicestate.version < DEVICESTATE_MIN_VER) {
@@ -411,7 +412,7 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (!loadProto(configFileName, LocalConfig_size, sizeof(LocalConfig), LocalConfig_fields, &config)) {
+    if (!loadProto(configFileName, LocalConfig_size, sizeof(LocalConfig), &LocalConfig_msg, &config)) {
         installDefaultConfig(); // Our in RAM copy might now be corrupt
     } else {
         if (config.version < DEVICESTATE_MIN_VER) {
@@ -422,7 +423,7 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (!loadProto(moduleConfigFileName, LocalModuleConfig_size, sizeof(LocalModuleConfig), LocalModuleConfig_fields, &moduleConfig)) {
+    if (!loadProto(moduleConfigFileName, LocalModuleConfig_size, sizeof(LocalModuleConfig), &LocalModuleConfig_msg, &moduleConfig)) {
         installDefaultModuleConfig(); // Our in RAM copy might now be corrupt
     } else {
         if (moduleConfig.version < DEVICESTATE_MIN_VER) {
@@ -433,7 +434,7 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (!loadProto(channelFileName, ChannelFile_size, sizeof(ChannelFile), ChannelFile_fields, &channelFile)) {
+    if (!loadProto(channelFileName, ChannelFile_size, sizeof(ChannelFile), &ChannelFile_msg, &channelFile)) {
         installDefaultChannels(); // Our in RAM copy might now be corrupt
     } else {
         if (channelFile.version < DEVICESTATE_MIN_VER) {
@@ -444,12 +445,12 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (loadProto(oemConfigFile, OEMStore_size, sizeof(OEMStore), OEMStore_fields, &oemStore))
+    if (loadProto(oemConfigFile, OEMStore_size, sizeof(OEMStore), &OEMStore_msg, &oemStore))
         DEBUG_MSG("Loaded OEMStore\n");
 }
 
 /** Save a protobuf from a file, return true for success */
-bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, const void *dest_struct)
+bool saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct)
 {
     bool okay = false;
 #ifdef FSCom
@@ -497,7 +498,7 @@ void NodeDB::saveChannelsToDisk()
 #ifdef FSCom
         FSCom.mkdir("/prefs");
 #endif
-        saveProto(channelFileName, ChannelFile_size, sizeof(channelFile), ChannelFile_fields, &channelFile);
+        saveProto(channelFileName, ChannelFile_size, &ChannelFile_msg, &channelFile);
     }
 }
 
@@ -507,7 +508,7 @@ void NodeDB::saveDeviceStateToDisk()
 #ifdef FSCom
         FSCom.mkdir("/prefs");
 #endif
-        saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+        saveProto(prefFileName, DeviceState_size, &DeviceState_msg, &devicestate);
     }
 }
 
@@ -529,7 +530,7 @@ void NodeDB::saveToDisk(int saveWhat)
             config.has_power = true;
             config.has_network = true;
             config.has_bluetooth = true;
-            saveProto(configFileName, LocalConfig_size, sizeof(config), LocalConfig_fields, &config);
+            saveProto(configFileName, LocalConfig_size, &LocalConfig_msg, &config);
         }
 
         if (saveWhat & SEGMENT_MODULECONFIG) {
@@ -540,7 +541,7 @@ void NodeDB::saveToDisk(int saveWhat)
             moduleConfig.has_serial = true;
             moduleConfig.has_store_forward = true;
             moduleConfig.has_telemetry = true;
-            saveProto(moduleConfigFileName, LocalModuleConfig_size, sizeof(moduleConfig), LocalModuleConfig_fields, &moduleConfig);
+            saveProto(moduleConfigFileName, LocalModuleConfig_size, &LocalModuleConfig_msg, &moduleConfig);
         }
 
         if (saveWhat & SEGMENT_CHANNELS) {

src/mesh/PhoneAPI.cpp

@@ -77,7 +77,7 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
     // return (lastContactMsec != 0) &&
 
     memset(&toRadioScratch, 0, sizeof(toRadioScratch));
-    if (pb_decode_from_bytes(buf, bufLength, ToRadio_fields, &toRadioScratch)) {
+    if (pb_decode_from_bytes(buf, bufLength, &ToRadio_msg, &toRadioScratch)) {
         switch (toRadioScratch.which_payload_variant) {
         case ToRadio_packet_tag:
             return handleToRadioPacket(toRadioScratch.packet);
@@ -291,7 +291,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
     // Do we have a message from the mesh?
     if (fromRadioScratch.which_payload_variant != 0) {
         // Encapsulate as a FromRadio packet
-        size_t numbytes = pb_encode_to_bytes(buf, FromRadio_size, FromRadio_fields, &fromRadioScratch);
+        size_t numbytes = pb_encode_to_bytes(buf, FromRadio_size, &FromRadio_msg, &fromRadioScratch);
 
         DEBUG_MSG("encoding toPhone packet to phone variant=%d, %d bytes\n", fromRadioScratch.which_payload_variant, numbytes);
         return numbytes;

src/mesh/RadioInterface.cpp

@@ -175,7 +175,7 @@ uint32_t RadioInterface::getRetransmissionMsec(const MeshPacket *p)
 {
     assert(slotTimeMsec); // Better be non zero
     static uint8_t bytes[MAX_RHPACKETLEN];
-    size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), Data_fields, &p->decoded);
+    size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &Data_msg, &p->decoded);
     uint32_t packetAirtime = getPacketTime(numbytes + sizeof(PacketHeader));
     // Make sure enough time has elapsed for this packet to be sent and an ACK is received.
     // DEBUG_MSG("Waiting for flooding message with airtime %d and slotTime is %d\n", packetAirtime, slotTimeMsec);

src/mesh/RadioInterface.h

@@ -1,6 +1,5 @@
 #pragma once
 
-#include "../concurrency/NotifiedWorkerThread.h"
 #include "MemoryPool.h"
 #include "MeshTypes.h"
 #include "Observer.h"
@@ -97,6 +96,8 @@ class RadioInterface
      */
     virtual bool canSleep() { return true; }
 
+    virtual bool wideLora() { return false; }
+
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() { return true; }
 

src/mesh/RadioLibInterface.cpp

@@ -3,6 +3,7 @@
 #include "NodeDB.h"
 #include "SPILock.h"
 #include "configuration.h"
+#include "main.h"
 #include "error.h"
 #include "mesh-pb-constants.h"
 #include <pb_decode.h>
@@ -87,10 +88,8 @@ bool RadioLibInterface::canSendImmediately()
         if (busyTx && (millis() - lastTxStart > 60000)) {
             DEBUG_MSG("Hardware Failure! busyTx for more than 60s\n");
             RECORD_CRITICALERROR(CriticalErrorCode_TRANSMIT_FAILED);
-#ifdef ARCH_ESP32
-            if (busyTx && (millis() - lastTxStart > 65000)) // After 5s more, reboot
-                ESP.restart();
-#endif
+            // reboot in 5 seconds when this condition occurs.
+            rebootAtMsec = lastTxStart + 65000;
         }
         if (busyRx)
             DEBUG_MSG("Can not send yet, busyRx\n");
@@ -386,6 +385,7 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
             int res = iface->startTransmit(radiobuf, numbytes);
             if (res != RADIOLIB_ERR_NONE) {
+                DEBUG_MSG("startTransmit failed, error=%d\n", res);
                 RECORD_CRITICALERROR(CriticalErrorCode_RADIO_SPI_BUG);
 
                 // This send failed, but make sure to 'complete' it properly

src/mesh/RadioLibInterface.h

@@ -1,10 +1,9 @@
 #pragma once
 
-#include "../concurrency/OSThread.h"
+#include "concurrency/NotifiedWorkerThread.h"
 #include "RadioInterface.h"
 #include "MeshPacketQueue.h"
 
-#define RADIOLIB_EXCLUDE_HTTP
 #include <RadioLib.h>
 
 // ESP32 has special rules about ISR code

src/mesh/RadioLibRF95.h

@@ -66,10 +66,5 @@ class RadioLibRF95: public SX1278 {
     // since default current limit for SX126x/127x in updated RadioLib is 60mA
     // use the previous value
     float currentLimit = 100;
-
-#ifndef RADIOLIB_GODMODE
-  private:
-#endif
-
 };
 

src/mesh/ReliableRouter.cpp

@@ -27,7 +27,7 @@ ErrorCode ReliableRouter::send(MeshPacket *p)
     return FloodingRouter::send(p);
 }
 
-bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
+bool ReliableRouter::shouldFilterReceived(const MeshPacket *p)
 {
     // Note: do not use getFrom() here, because we want to ignore messages sent from phone
     if (p->from == getNodeNum()) {
@@ -37,9 +37,8 @@ bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
         // If this is the first time we saw this, cancel any retransmissions we have queued up and generate an internal ack for
         // the original sending process.
 
-        // FIXME - we might want to turn off this "optimization", it does save lots of airtime but it assumes that once we've
-        // heard one one adjacent node hear our packet that a) probably other adjacent nodes heard it and b) we can trust those
-        // nodes to reach our destination.  Both of which might be incorrect.
+        // This "optimization", does save lots of airtime. For DMs, you also get a real ACK back
+	// from the intended recipient.
         auto key = GlobalPacketId(getFrom(p), p->id);
         auto old = findPendingPacket(key);
         if (old) {
@@ -54,16 +53,11 @@ bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
         }
     }
 
-    /* send acks for repeated packets that want acks and are destined for us
-     * this way if an ACK is dropped and a packet is resent we'll ACK the resent packet
-     * make sure wasSeenRecently _doesn't_ update
-     * finding the channel requires decoding the packet. */
-    if (p->want_ack && (p->to == getNodeNum()) && wasSeenRecently(p, false) && !MeshModule::currentReply) {
-        if (perhapsDecode(p)) {
-            sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
-            DEBUG_MSG("acking a repeated want_ack packet\n");
-        }
-    } else if (wasSeenRecently(p, false) && p->hop_limit == HOP_RELIABLE && !MeshModule::currentReply && p->to != nodeDB.getNodeNum()) {
+    /* Resend implicit ACKs for repeated packets (assuming the original packet was sent with HOP_RELIABLE)
+    * this way if an implicit ACK is dropped and a packet is resent we'll rebroadcast again.
+    * Resending real ACKs is omitted, as you might receive a packet multiple times due to flooding and 
+    * flooding this ACK back to the original sender already adds redundancy. */ 
+    if (wasSeenRecently(p, false) && p->hop_limit == HOP_RELIABLE && !MeshModule::currentReply && p->to != nodeDB.getNodeNum()) {
         // retransmission on broadcast has hop_limit still equal to HOP_RELIABLE
         DEBUG_MSG("Resending implicit ack for a repeated floodmsg\n");
         MeshPacket *tosend = packetPool.allocCopy(*p);
@@ -90,8 +84,7 @@ void ReliableRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
     NodeNum ourNode = getNodeNum();
 
-    if (p->to == ourNode) { // ignore ack/nak/want_ack packets that are not address to us (we only handle 0 hop reliability
-                            // - not DSR routing)
+    if (p->to == ourNode) { // ignore ack/nak/want_ack packets that are not address to us (we only handle 0 hop reliability)
         if (p->want_ack) {
             if (MeshModule::currentReply)
                 DEBUG_MSG("Some other module has replied to this message, no need for a 2nd ack\n");
@@ -200,8 +193,7 @@ int32_t ReliableRouter::doRetransmissions()
                 DEBUG_MSG("Reliable send failed, returning a nak for fr=0x%x,to=0x%x,id=0x%x\n", p.packet->from, p.packet->to,
                           p.packet->id);
                 sendAckNak(Routing_Error_MAX_RETRANSMIT, getFrom(p.packet), p.packet->id, p.packet->channel);
-                // Note: we don't stop retransmission here, instead the Nak packet gets processed in sniffReceived - which
-                // allows the DSR version to still be able to look at the PendingPacket
+                // Note: we don't stop retransmission here, instead the Nak packet gets processed in sniffReceived
                 stopRetransmission(it->first);
                 stillValid = false; // just deleted it
             } else {

src/mesh/ReliableRouter.h

@@ -38,12 +38,6 @@ struct PendingPacket {
     /** Starts at NUM_RETRANSMISSIONS -1(normally 3) and counts down.  Once zero it will be removed from the list */
     uint8_t numRetransmissions = 0;
 
-    /** True if we have started trying to find a route - for DSR usage
-     * While trying to find a route we don't actually send the data packet.  We just leave it here pending until
-     * we have a route or we've failed to find one.
-     */
-    bool wantRoute = false;
-
     PendingPacket() {}
     explicit PendingPacket(MeshPacket *p);
 };
@@ -102,7 +96,7 @@ class ReliableRouter : public FloodingRouter
     /**
      * We hook this method so we can see packets before FloodingRouter says they should be discarded
      */
-    virtual bool shouldFilterReceived(MeshPacket *p) override;
+    virtual bool shouldFilterReceived(const MeshPacket *p) override;
 
     /**
      * Add p to the list of packets to retransmit occasionally.  We will free it once we stop retransmitting.

src/mesh/Router.cpp

@@ -2,6 +2,7 @@
 #include "Channels.h"
 #include "CryptoEngine.h"
 #include "NodeDB.h"
+#include "MeshRadio.h"
 #include "RTC.h"
 #include "configuration.h"
 #include "main.h"
@@ -21,7 +22,6 @@ extern "C" {
  * DONE: Implement basic interface and use it elsewhere in app
  * Add naive flooding mixin (& drop duplicate rx broadcasts), add tools for sending broadcasts with incrementing sequence #s
  * Add an optional adjacent node only 'send with ack' mixin.  If we timeout waiting for the ack, call handleAckTimeout(packet)
- * Add DSR mixin
  *
  **/
 
@@ -188,6 +188,18 @@ ErrorCode Router::send(MeshPacket *p)
 {
     assert(p->to != nodeDB.getNodeNum()); // should have already been handled by sendLocal
 
+    // Abort sending if we are violating the duty cycle
+    if (!config.lora.override_duty_cycle && myRegion->dutyCycle != 100) {
+      float hourlyTxPercent = airTime->utilizationTXPercent();
+      if (hourlyTxPercent > myRegion->dutyCycle) {
+          uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle); 
+          DEBUG_MSG("WARNING: Duty cycle limit exceeded. Aborting send for now, you can send again in %d minutes.\n", silentMinutes);
+          Routing_Error err = Routing_Error_DUTY_CYCLE_LIMIT;
+          abortSendAndNak(err, p);
+          return err;
+      }
+    }
+
     // PacketId nakId = p->decoded.which_ackVariant == SubPacket_fail_id_tag ? p->decoded.ackVariant.fail_id : 0;
     // assert(!nakId); // I don't think we ever send 0hop naks over the wire (other than to the phone), test that assumption with
     // assert
@@ -294,7 +306,7 @@ bool perhapsDecode(MeshPacket *p)
 
             // Take those raw bytes and convert them back into a well structured protobuf we can understand
             memset(&p->decoded, 0, sizeof(p->decoded));
-            if (!pb_decode_from_bytes(bytes, rawSize, Data_fields, &p->decoded)) {
+            if (!pb_decode_from_bytes(bytes, rawSize, &Data_msg, &p->decoded)) {
                 DEBUG_MSG("Invalid protobufs in received mesh packet (bad psk?)!\n");
             } else if (p->decoded.portnum == PortNum_UNKNOWN_APP) {
                 DEBUG_MSG("Invalid portnum (bad psk?)!\n");
@@ -348,7 +360,7 @@ Routing_Error perhapsEncode(MeshPacket *p)
     if (p->which_payload_variant == MeshPacket_decoded_tag) {
         static uint8_t bytes[MAX_RHPACKETLEN]; // we have to use a scratch buffer because a union
 
-        size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), Data_fields, &p->decoded);
+        size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &Data_msg, &p->decoded);
 
         // Only allow encryption on the text message app.
         //  TODO: Allow modules to opt into compression.

src/mesh/Router.h

@@ -90,7 +90,7 @@ class Router : protected concurrency::OSThread
      * Called immedately on receiption, before any further processing.
      * @return true to abandon the packet
      */
-    virtual bool shouldFilterReceived(MeshPacket *p) { return false; }
+    virtual bool shouldFilterReceived(const MeshPacket *p) { return false; }
 
     /**
      * Every (non duplicate) packet this node receives will be passed through this method.  This allows subclasses to

src/mesh/SX1280Interface.cpp

@@ -2,12 +2,8 @@
 #include "SX1280Interface.h"
 #include "error.h"
 
-#if defined(RADIOLIB_GODMODE)
-
 SX1280Interface::SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
                                  SPIClass &spi)
     : SX128xInterface(cs, irq, rst, busy, spi)
 {
 }
-
-#endif

src/mesh/SX1280Interface.h

@@ -6,12 +6,9 @@
  * Our adapter for SX1280 radios
  */
 
-#if defined(RADIOLIB_GODMODE)
 
 class SX1280Interface : public SX128xInterface<SX1280>
 {
   public:
     SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
 };
-
-#endif

src/mesh/SX128xInterface.cpp

@@ -1,9 +1,8 @@
 #include "configuration.h"
 #include "SX128xInterface.h"
+#include "mesh/NodeDB.h"
 #include "error.h"
 
-#if defined(RADIOLIB_GODMODE)
-
 // Particular boards might define a different max power based on what their hardware can do
 #ifndef SX128X_MAX_POWER
 #define SX128X_MAX_POWER 13
@@ -27,11 +26,11 @@ bool SX128xInterface<T>::init()
     pinMode(SX128X_POWER_EN, OUTPUT);
 #endif
 
-#ifdef SX128X_RXEN                  // set not rx or tx mode
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // set not rx or tx mode
     digitalWrite(SX128X_RXEN, LOW); // Set low before becoming an output
     pinMode(SX128X_RXEN, OUTPUT);
 #endif
-#ifdef SX128X_TXEN
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
     digitalWrite(SX128X_TXEN, LOW);
     pinMode(SX128X_TXEN, OUTPUT);
 #endif
@@ -46,20 +45,30 @@ bool SX128xInterface<T>::init()
 
     limitPower();
 
+    preambleLength = 12; // 12 is the default for this chip, 32 does not RX at all
+
     int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength);
     // \todo Display actual typename of the adapter, not just `SX128x`
     DEBUG_MSG("SX128x init result %d\n", res);
 
+    if((config.lora.region != Config_LoRaConfig_RegionCode_LORA_24) && (res == RADIOLIB_ERR_INVALID_FREQUENCY)) {
+        DEBUG_MSG("Warning: Radio chip only supports 2.4GHz LoRa. Adjusting Region and rebooting.\n");
+        config.lora.region = Config_LoRaConfig_RegionCode_LORA_24;
+        nodeDB.saveToDisk(SEGMENT_CONFIG);
+        delay(2000);
+#if defined(ARCH_ESP32)
+        ESP.restart();
+#elif defined(ARCH_NRF52)
+        NVIC_SystemReset();
+#else
+        DEBUG_MSG("FIXME implement reboot for this platform. Skipping for now.\n");
+#endif
+    }
+
     DEBUG_MSG("Frequency set to %f\n", getFreq());    
     DEBUG_MSG("Bandwidth set to %f\n", bw);    
     DEBUG_MSG("Power output set to %d\n", power);    
 
-#ifdef SX128X_TXEN
-    // lora.begin sets Dio2 as RF switch control, which is not true if we are manually controlling RX and TX
-    if (res == RADIOLIB_ERR_NONE)
-        res = lora.setDio2AsRfSwitch(true);
-#endif
-
     if (res == RADIOLIB_ERR_NONE)
         res = lora.setCRC(2);
 
@@ -122,18 +131,28 @@ void INTERRUPT_ATTR SX128xInterface<T>::disableInterrupt()
     lora.clearDio1Action();
 }
 
+template<typename T>
+bool SX128xInterface<T>::wideLora()
+{
+    return true;
+}
+
 template<typename T>
 void SX128xInterface<T>::setStandby()
 {
     checkNotification(); // handle any pending interrupts before we force standby
     
     int err = lora.standby();
+
+    if (err != RADIOLIB_ERR_NONE)
+        DEBUG_MSG("SX128x standby failed with error %d\n", err);
+
     assert(err == RADIOLIB_ERR_NONE);
 
-#ifdef SX128X_RXEN // we have RXEN/TXEN control - turn off RX and TX power
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn off RX and TX power
     digitalWrite(SX128X_RXEN, LOW);
 #endif
-#ifdef SX128X_TXEN
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
     digitalWrite(SX128X_TXEN, LOW);
 #endif
 
@@ -158,10 +177,10 @@ void SX128xInterface<T>::addReceiveMetadata(MeshPacket *mp)
 template<typename T>
 void SX128xInterface<T>::configHardwareForSend()
 {
-#ifdef SX128X_TXEN // we have RXEN/TXEN control - turn on TX power / off RX power
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on TX power / off RX power
     digitalWrite(SX128X_TXEN, HIGH);
 #endif
-#ifdef SX128X_RXEN
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC)
     digitalWrite(SX128X_RXEN, LOW);
 #endif
 
@@ -180,10 +199,10 @@ void SX128xInterface<T>::startReceive()
 
     setStandby();
 
-#ifdef SX128X_RXEN // we have RXEN/TXEN control - turn on RX power / off TX power
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on RX power / off TX power
     digitalWrite(SX128X_RXEN, HIGH);
 #endif
-#ifdef SX128X_TXEN
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
     digitalWrite(SX128X_TXEN, LOW);
 #endif
   
@@ -219,8 +238,6 @@ bool SX128xInterface<T>::isChannelActive()
 template<typename T>
 bool SX128xInterface<T>::isActivelyReceiving()
 {
-    // return isChannelActive();
-
     uint16_t irq = lora.getIrqStatus();
     bool hasPreamble = (irq & RADIOLIB_SX128X_IRQ_HEADER_VALID);
     return hasPreamble;
@@ -248,5 +265,3 @@ bool SX128xInterface<T>::sleep()
 
     return true;
 }
-
-#endif

src/mesh/SX128xInterface.h

@@ -1,7 +1,5 @@
 #pragma once
 
-#if defined(RADIOLIB_GODMODE)
-
 #include "RadioLibInterface.h"
 
 /**
@@ -19,6 +17,8 @@ class SX128xInterface : public RadioLibInterface
     /// \return true if initialisation succeeded.
     virtual bool init() override;
 
+    virtual bool wideLora() override;
+
     /// Apply any radio provisioning changes
     /// Make sure the Driver is properly configured before calling init().
     /// \return true if initialisation succeeded.
@@ -27,9 +27,9 @@ class SX128xInterface : public RadioLibInterface
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() override;
 
-  protected:
+    bool isIRQPending() override { return lora.getIrqStatus() != 0; }
 
-    float currentLimit = 140; // Higher OCP limit for SX128x PA
+  protected:
 
     /**
      * Specific module instance 
@@ -71,5 +71,3 @@ class SX128xInterface : public RadioLibInterface
 
   private:
 };
-
-#endif

src/mesh/StreamAPI.cpp

@@ -6,7 +6,7 @@
 #define START2 0xc3
 #define HEADER_LEN 4
 
-int32_t StreamAPI::runOnce()
+int32_t StreamAPI::runOncePart()
 {
     auto result = readStream();
     writeStream();
@@ -115,7 +115,7 @@ void StreamAPI::emitRebooted()
     fromRadioScratch.rebooted = true;
 
     // DEBUG_MSG("Emitting reboot packet for serial shell\n");
-    emitTxBuffer(pb_encode_to_bytes(txBuf + HEADER_LEN, FromRadio_size, FromRadio_fields, &fromRadioScratch));
+    emitTxBuffer(pb_encode_to_bytes(txBuf + HEADER_LEN, FromRadio_size, &FromRadio_msg, &fromRadioScratch));
 }
 
 /// Hookable to find out when connection changes

src/mesh/StreamAPI.h

@@ -28,7 +28,7 @@ valid utf8 encoding. This makes it a bit easier to start a device outputting reg
 after it has received a valid packet from the PC, turn off unencoded debug printing and switch to this packet encoding.
 
  */
-class StreamAPI : public PhoneAPI, protected concurrency::OSThread
+class StreamAPI : public PhoneAPI
 {
     /**
      * The stream we read/write from
@@ -42,13 +42,13 @@ class StreamAPI : public PhoneAPI, protected concurrency::OSThread
     uint32_t lastRxMsec = 0;
 
   public:
-    StreamAPI(Stream *_stream) : concurrency::OSThread("StreamAPI"), stream(_stream) {}
+    StreamAPI(Stream *_stream) : stream(_stream) {}
 
     /**
      * Currently we require frequent invocation from loop() to check for arrived serial packets and to send new packets to the
      * phone.
      */
-    virtual int32_t runOnce() override;
+    virtual int32_t runOncePart();
 
   private:
     /**

src/mesh/eth/ethServerAPI.cpp

@@ -14,7 +14,7 @@ void initApiServer(int port)
     }
 }
 
-ethServerAPI::ethServerAPI(EthernetClient &_client) : StreamAPI(&client), client(_client)
+ethServerAPI::ethServerAPI(EthernetClient &_client) : StreamAPI(&client), concurrency::OSThread("ethServerAPI"), client(_client)
 {
     DEBUG_MSG("Incoming ethernet connection\n");
 }
@@ -42,7 +42,7 @@ bool ethServerAPI::checkIsConnected()
 int32_t ethServerAPI::runOnce()
 {
     if (client.connected()) {
-        return StreamAPI::runOnce();
+        return StreamAPI::runOncePart();
     } else {
         DEBUG_MSG("Client dropped connection, suspending API service\n");
         enabled = false; // we no longer need to run

src/mesh/eth/ethServerAPI.h

@@ -7,7 +7,7 @@
  * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs
  * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs).
  */
-class ethServerAPI : public StreamAPI
+class ethServerAPI : public StreamAPI, private concurrency::OSThread
 {
   private:
     EthernetClient client;

src/mesh/generated/admin.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "admin.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/admin.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_ADMIN_PB_H_INCLUDED
 #define PB_ADMIN_PB_H_INCLUDED
@@ -15,32 +15,49 @@
 #endif
 
 /* Enum definitions */
-typedef enum _AdminMessage_ConfigType { 
-    AdminMessage_ConfigType_DEVICE_CONFIG = 0, 
-    AdminMessage_ConfigType_POSITION_CONFIG = 1, 
-    AdminMessage_ConfigType_POWER_CONFIG = 2, 
-    AdminMessage_ConfigType_NETWORK_CONFIG = 3, 
-    AdminMessage_ConfigType_DISPLAY_CONFIG = 4, 
-    AdminMessage_ConfigType_LORA_CONFIG = 5, 
-    AdminMessage_ConfigType_BLUETOOTH_CONFIG = 6 
+/* TODO: REPLACE */
+typedef enum _AdminMessage_ConfigType {
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_DEVICE_CONFIG = 0,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_POSITION_CONFIG = 1,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_POWER_CONFIG = 2,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_NETWORK_CONFIG = 3,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_DISPLAY_CONFIG = 4,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_LORA_CONFIG = 5,
+    /* TODO: REPLACE */
+    AdminMessage_ConfigType_BLUETOOTH_CONFIG = 6
 } AdminMessage_ConfigType;
 
-typedef enum _AdminMessage_ModuleConfigType { 
-    AdminMessage_ModuleConfigType_MQTT_CONFIG = 0, 
-    AdminMessage_ModuleConfigType_SERIAL_CONFIG = 1, 
-    AdminMessage_ModuleConfigType_EXTNOTIF_CONFIG = 2, 
-    AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG = 3, 
-    AdminMessage_ModuleConfigType_RANGETEST_CONFIG = 4, 
-    AdminMessage_ModuleConfigType_TELEMETRY_CONFIG = 5, 
-    AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG = 6, 
-    AdminMessage_ModuleConfigType_AUDIO_CONFIG = 7 
+/* TODO: REPLACE */
+typedef enum _AdminMessage_ModuleConfigType {
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_MQTT_CONFIG = 0,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_SERIAL_CONFIG = 1,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_EXTNOTIF_CONFIG = 2,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG = 3,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_RANGETEST_CONFIG = 4,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_TELEMETRY_CONFIG = 5,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG = 6,
+    /* TODO: REPLACE */
+    AdminMessage_ModuleConfigType_AUDIO_CONFIG = 7
 } AdminMessage_ModuleConfigType;
 
 /* Struct definitions */
 /* This message is handled by the Admin module and is responsible for all settings/channel read/write operations.
  This message is used to do settings operations to both remote AND local nodes.
  (Prior to 1.2 these operations were done via special ToRadio operations) */
-typedef struct _AdminMessage { 
+typedef struct _AdminMessage {
     pb_size_t which_payload_variant;
     union {
         /* Send the specified channel in the response to this message
@@ -112,6 +129,10 @@ typedef struct _AdminMessage {
 } AdminMessage;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _AdminMessage_ConfigType_MIN AdminMessage_ConfigType_DEVICE_CONFIG
 #define _AdminMessage_ConfigType_MAX AdminMessage_ConfigType_BLUETOOTH_CONFIG
@@ -121,10 +142,9 @@ typedef struct _AdminMessage {
 #define _AdminMessage_ModuleConfigType_MAX AdminMessage_ModuleConfigType_AUDIO_CONFIG
 #define _AdminMessage_ModuleConfigType_ARRAYSIZE ((AdminMessage_ModuleConfigType)(AdminMessage_ModuleConfigType_AUDIO_CONFIG+1))
 
+#define AdminMessage_payload_variant_get_config_request_ENUMTYPE AdminMessage_ConfigType
+#define AdminMessage_payload_variant_get_module_config_request_ENUMTYPE AdminMessage_ModuleConfigType
 
-#ifdef __cplusplus
-extern "C" {
-#endif
 
 /* Initializer values for message structs */
 #define AdminMessage_init_default                {0, {0}}

src/mesh/generated/apponly.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "apponly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/apponly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_APPONLY_PB_H_INCLUDED
 #define PB_APPONLY_PB_H_INCLUDED
@@ -17,7 +17,7 @@
  any SECONDARY channels.
  No DISABLED channels are included.
  This abstraction is used only on the the 'app side' of the world (ie python, javascript and android etc) to show a group of Channels as a (long) URL */
-typedef struct _ChannelSet { 
+typedef struct _ChannelSet {
     /* Channel list with settings */
     pb_size_t settings_count;
     ChannelSettings settings[8];
@@ -54,7 +54,7 @@ extern const pb_msgdesc_t ChannelSet_msg;
 #define ChannelSet_fields &ChannelSet_msg
 
 /* Maximum encoded size of messages (where known) */
-#define ChannelSet_size                          582
+#define ChannelSet_size                          584
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/cannedmessages.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "cannedmessages.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/cannedmessages.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_CANNEDMESSAGES_PB_H_INCLUDED
 #define PB_CANNEDMESSAGES_PB_H_INCLUDED
@@ -11,7 +11,7 @@
 
 /* Struct definitions */
 /* Canned message module configuration. */
-typedef struct _CannedMessageModuleConfig { 
+typedef struct _CannedMessageModuleConfig {
     /* Predefined messages for canned message module separated by '|' characters. */
     char messages[201];
 } CannedMessageModuleConfig;

src/mesh/generated/channel.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "channel.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/channel.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_CHANNEL_PB_H_INCLUDED
 #define PB_CHANNEL_PB_H_INCLUDED
@@ -10,10 +10,23 @@
 #endif
 
 /* Enum definitions */
-typedef enum _Channel_Role { 
-    Channel_Role_DISABLED = 0, 
-    Channel_Role_PRIMARY = 1, 
-    Channel_Role_SECONDARY = 2 
+/* How this channel is being used (or not).
+ Note: this field is an enum to give us options for the future.
+ In particular, someday we might make a 'SCANNING' option.
+ SCANNING channels could have different frequencies and the radio would
+ occasionally check that freq to see if anything is being transmitted.
+ For devices that have multiple physical radios attached, we could keep multiple PRIMARY/SCANNING channels active at once to allow
+ cross band routing as needed.
+ If a device has only a single radio (the common case) only one channel can be PRIMARY at a time
+ (but any number of SECONDARY channels can't be sent received on that common frequency) */
+typedef enum _Channel_Role {
+    /* This channel is not in use right now */
+    Channel_Role_DISABLED = 0,
+    /* This channel is used to set the frequency for the radio - all other enabled channels must be SECONDARY */
+    Channel_Role_PRIMARY = 1,
+    /* Secondary channels are only used for encryption/decryption/authentication purposes.
+ Their radio settings (freq etc) are ignored, only psk is used. */
+    Channel_Role_SECONDARY = 2
 } Channel_Role;
 
 /* Struct definitions */
@@ -37,7 +50,7 @@ typedef PB_BYTES_ARRAY_T(32) ChannelSettings_psk_t;
  FIXME: Add description of multi-channel support and how primary vs secondary channels are used.
  FIXME: explain how apps use channels for security.
  explain how remote settings and remote gpio are managed as an example */
-typedef struct _ChannelSettings { 
+typedef struct _ChannelSettings {
     /* Deprecated in favor of LoraConfig.channel_num */
     uint32_t channel_num;
     /* A simple pre-shared key for now for crypto.
@@ -79,7 +92,7 @@ typedef struct _ChannelSettings {
 } ChannelSettings;
 
 /* A pair of a channel number, mode and the (sharable) settings for that channel */
-typedef struct _Channel { 
+typedef struct _Channel {
     /* The index of this channel in the channel table (from 0 to MAX_NUM_CHANNELS-1)
  (Someday - not currently implemented) An index of -1 could be used to mean "set by name",
  in which case the target node will find and set the channel by settings.name. */
@@ -92,15 +105,18 @@ typedef struct _Channel {
 } Channel;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _Channel_Role_MIN Channel_Role_DISABLED
 #define _Channel_Role_MAX Channel_Role_SECONDARY
 #define _Channel_Role_ARRAYSIZE ((Channel_Role)(Channel_Role_SECONDARY+1))
 
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+#define Channel_role_ENUMTYPE Channel_Role
+
 
 /* Initializer values for message structs */
 #define ChannelSettings_init_default             {0, {0, {0}}, "", 0, 0, 0}

src/mesh/generated/config.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_CONFIG_PB_H_INCLUDED
 #define PB_CONFIG_PB_H_INCLUDED
@@ -10,168 +10,371 @@
 #endif
 
 /* Enum definitions */
-typedef enum _Config_DeviceConfig_Role { 
-    Config_DeviceConfig_Role_CLIENT = 0, 
-    Config_DeviceConfig_Role_CLIENT_MUTE = 1, 
-    Config_DeviceConfig_Role_ROUTER = 2, 
-    Config_DeviceConfig_Role_ROUTER_CLIENT = 3 
+/* Defines the device's role on the Mesh network */
+typedef enum _Config_DeviceConfig_Role {
+    /* Client device role */
+    Config_DeviceConfig_Role_CLIENT = 0,
+    /* Client Mute device role
+   Same as a client except packets will not hop over this node, does not contribute to routing packets for mesh. */
+    Config_DeviceConfig_Role_CLIENT_MUTE = 1,
+    /* Router device role.
+   Mesh packets will prefer to be routed over this node. This node will not be used by client apps. 
+   The wifi/ble radios and the oled screen will be put to sleep. */
+    Config_DeviceConfig_Role_ROUTER = 2,
+    /* Router Client device role
+   Mesh packets will prefer to be routed over this node. The Router Client can be used as both a Router and an app connected Client. */
+    Config_DeviceConfig_Role_ROUTER_CLIENT = 3
 } Config_DeviceConfig_Role;
 
-typedef enum _Config_PositionConfig_PositionFlags { 
-    Config_PositionConfig_PositionFlags_UNSET = 0, 
-    Config_PositionConfig_PositionFlags_ALTITUDE = 1, 
-    Config_PositionConfig_PositionFlags_ALTITUDE_MSL = 2, 
-    Config_PositionConfig_PositionFlags_GEOIDAL_SEPARATION = 4, 
-    Config_PositionConfig_PositionFlags_DOP = 8, 
-    Config_PositionConfig_PositionFlags_HVDOP = 16, 
-    Config_PositionConfig_PositionFlags_SATINVIEW = 32, 
-    Config_PositionConfig_PositionFlags_SEQ_NO = 64, 
-    Config_PositionConfig_PositionFlags_TIMESTAMP = 128, 
-    Config_PositionConfig_PositionFlags_HEADING = 256, 
-    Config_PositionConfig_PositionFlags_SPEED = 512 
+/* Bit field of boolean configuration options, indicating which optional
+   fields to include when assembling POSITION messages
+ Longitude and latitude are always included (also time if GPS-synced)
+ NOTE: the more fields are included, the larger the message will be -
+   leading to longer airtime and a higher risk of packet loss */
+typedef enum _Config_PositionConfig_PositionFlags {
+    /* Required for compilation */
+    Config_PositionConfig_PositionFlags_UNSET = 0,
+    /* Include an altitude value (if available) */
+    Config_PositionConfig_PositionFlags_ALTITUDE = 1,
+    /* Altitude value is MSL */
+    Config_PositionConfig_PositionFlags_ALTITUDE_MSL = 2,
+    /* Include geoidal separation */
+    Config_PositionConfig_PositionFlags_GEOIDAL_SEPARATION = 4,
+    /* Include the DOP value ; PDOP used by default, see below */
+    Config_PositionConfig_PositionFlags_DOP = 8,
+    /* If POS_DOP set, send separate HDOP / VDOP values instead of PDOP */
+    Config_PositionConfig_PositionFlags_HVDOP = 16,
+    /* Include number of "satellites in view" */
+    Config_PositionConfig_PositionFlags_SATINVIEW = 32,
+    /* Include a sequence number incremented per packet */
+    Config_PositionConfig_PositionFlags_SEQ_NO = 64,
+    /* Include positional timestamp (from GPS solution) */
+    Config_PositionConfig_PositionFlags_TIMESTAMP = 128,
+    /* Include positional heading
+ Intended for use with vehicle not walking speeds
+ walking speeds are likely to be error prone like the compass */
+    Config_PositionConfig_PositionFlags_HEADING = 256,
+    /* Include positional speed
+ Intended for use with vehicle not walking speeds
+ walking speeds are likely to be error prone like the compass */
+    Config_PositionConfig_PositionFlags_SPEED = 512
 } Config_PositionConfig_PositionFlags;
 
-typedef enum _Config_NetworkConfig_EthMode { 
-    Config_NetworkConfig_EthMode_DHCP = 0, 
-    Config_NetworkConfig_EthMode_STATIC = 1 
+typedef enum _Config_NetworkConfig_EthMode {
+    /* obtain ip address via DHCP */
+    Config_NetworkConfig_EthMode_DHCP = 0,
+    /* use static ip address */
+    Config_NetworkConfig_EthMode_STATIC = 1
 } Config_NetworkConfig_EthMode;
 
-typedef enum _Config_DisplayConfig_GpsCoordinateFormat { 
-    Config_DisplayConfig_GpsCoordinateFormat_DEC = 0, 
-    Config_DisplayConfig_GpsCoordinateFormat_DMS = 1, 
-    Config_DisplayConfig_GpsCoordinateFormat_UTM = 2, 
-    Config_DisplayConfig_GpsCoordinateFormat_MGRS = 3, 
-    Config_DisplayConfig_GpsCoordinateFormat_OLC = 4, 
-    Config_DisplayConfig_GpsCoordinateFormat_OSGR = 5 
+/* How the GPS coordinates are displayed on the OLED screen. */
+typedef enum _Config_DisplayConfig_GpsCoordinateFormat {
+    /* GPS coordinates are displayed in the normal decimal degrees format:
+ DD.DDDDDD DDD.DDDDDD */
+    Config_DisplayConfig_GpsCoordinateFormat_DEC = 0,
+    /* GPS coordinates are displayed in the degrees minutes seconds format:
+ DD°MM'SS"C DDD°MM'SS"C, where C is the compass point representing the locations quadrant */
+    Config_DisplayConfig_GpsCoordinateFormat_DMS = 1,
+    /* Universal Transverse Mercator format:
+ ZZB EEEEEE NNNNNNN, where Z is zone, B is band, E is easting, N is northing */
+    Config_DisplayConfig_GpsCoordinateFormat_UTM = 2,
+    /* Military Grid Reference System format:
+ ZZB CD EEEEE NNNNN, where Z is zone, B is band, C is the east 100k square, D is the north 100k square,
+ E is easting, N is northing */
+    Config_DisplayConfig_GpsCoordinateFormat_MGRS = 3,
+    /* Open Location Code (aka Plus Codes). */
+    Config_DisplayConfig_GpsCoordinateFormat_OLC = 4,
+    /* Ordnance Survey Grid Reference (the National Grid System of the UK).
+ Format: AB EEEEE NNNNN, where A is the east 100k square, B is the north 100k square,
+ E is the easting, N is the northing */
+    Config_DisplayConfig_GpsCoordinateFormat_OSGR = 5
 } Config_DisplayConfig_GpsCoordinateFormat;
 
-typedef enum _Config_DisplayConfig_DisplayUnits { 
-    Config_DisplayConfig_DisplayUnits_METRIC = 0, 
-    Config_DisplayConfig_DisplayUnits_IMPERIAL = 1 
+/* Unit display preference */
+typedef enum _Config_DisplayConfig_DisplayUnits {
+    /* Metric (Default) */
+    Config_DisplayConfig_DisplayUnits_METRIC = 0,
+    /* Imperial */
+    Config_DisplayConfig_DisplayUnits_IMPERIAL = 1
 } Config_DisplayConfig_DisplayUnits;
 
-typedef enum _Config_DisplayConfig_OledType { 
-    Config_DisplayConfig_OledType_OLED_AUTO = 0, 
-    Config_DisplayConfig_OledType_OLED_SSD1306 = 1, 
-    Config_DisplayConfig_OledType_OLED_SH1106 = 2 
+/* Override OLED outo detect with this if it fails. */
+typedef enum _Config_DisplayConfig_OledType {
+    /* Default / Auto */
+    Config_DisplayConfig_OledType_OLED_AUTO = 0,
+    /* Default / Auto */
+    Config_DisplayConfig_OledType_OLED_SSD1306 = 1,
+    /* Default / Auto */
+    Config_DisplayConfig_OledType_OLED_SH1106 = 2
 } Config_DisplayConfig_OledType;
 
-typedef enum _Config_LoRaConfig_RegionCode { 
-    Config_LoRaConfig_RegionCode_UNSET = 0, 
-    Config_LoRaConfig_RegionCode_US = 1, 
-    Config_LoRaConfig_RegionCode_EU_433 = 2, 
-    Config_LoRaConfig_RegionCode_EU_868 = 3, 
-    Config_LoRaConfig_RegionCode_CN = 4, 
-    Config_LoRaConfig_RegionCode_JP = 5, 
-    Config_LoRaConfig_RegionCode_ANZ = 6, 
-    Config_LoRaConfig_RegionCode_KR = 7, 
-    Config_LoRaConfig_RegionCode_TW = 8, 
-    Config_LoRaConfig_RegionCode_RU = 9, 
-    Config_LoRaConfig_RegionCode_IN = 10, 
-    Config_LoRaConfig_RegionCode_NZ_865 = 11, 
-    Config_LoRaConfig_RegionCode_TH = 12, 
-    Config_LoRaConfig_RegionCode_LORA_24 = 13 
+typedef enum _Config_LoRaConfig_RegionCode {
+    /* Region is not set */
+    Config_LoRaConfig_RegionCode_UNSET = 0,
+    /* United States */
+    Config_LoRaConfig_RegionCode_US = 1,
+    /* European Union 433mhz */
+    Config_LoRaConfig_RegionCode_EU_433 = 2,
+    /* European Union 433mhz */
+    Config_LoRaConfig_RegionCode_EU_868 = 3,
+    /* China */
+    Config_LoRaConfig_RegionCode_CN = 4,
+    /* Japan */
+    Config_LoRaConfig_RegionCode_JP = 5,
+    /* Australia / New Zealand */
+    Config_LoRaConfig_RegionCode_ANZ = 6,
+    /* Korea */
+    Config_LoRaConfig_RegionCode_KR = 7,
+    /* Taiwan */
+    Config_LoRaConfig_RegionCode_TW = 8,
+    /* Russia */
+    Config_LoRaConfig_RegionCode_RU = 9,
+    /* India */
+    Config_LoRaConfig_RegionCode_IN = 10,
+    /* New Zealand 865mhz */
+    Config_LoRaConfig_RegionCode_NZ_865 = 11,
+    /* Thailand */
+    Config_LoRaConfig_RegionCode_TH = 12,
+    /* WLAN Band */
+    Config_LoRaConfig_RegionCode_LORA_24 = 13
 } Config_LoRaConfig_RegionCode;
 
-typedef enum _Config_LoRaConfig_ModemPreset { 
-    Config_LoRaConfig_ModemPreset_LONG_FAST = 0, 
-    Config_LoRaConfig_ModemPreset_LONG_SLOW = 1, 
-    Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW = 2, 
-    Config_LoRaConfig_ModemPreset_MEDIUM_SLOW = 3, 
-    Config_LoRaConfig_ModemPreset_MEDIUM_FAST = 4, 
-    Config_LoRaConfig_ModemPreset_SHORT_SLOW = 5, 
-    Config_LoRaConfig_ModemPreset_SHORT_FAST = 6 
+/* Standard predefined channel settings
+ Note: these mappings must match ModemPreset Choice in the device code. */
+typedef enum _Config_LoRaConfig_ModemPreset {
+    /* Long Range - Fast */
+    Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
+    /* Long Range - Slow */
+    Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
+    /* Very Long Range - Slow */
+    Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW = 2,
+    /* Medium Range - Slow */
+    Config_LoRaConfig_ModemPreset_MEDIUM_SLOW = 3,
+    /* Medium Range - Fast */
+    Config_LoRaConfig_ModemPreset_MEDIUM_FAST = 4,
+    /* Short Range - Slow */
+    Config_LoRaConfig_ModemPreset_SHORT_SLOW = 5,
+    /* Short Range - Fast */
+    Config_LoRaConfig_ModemPreset_SHORT_FAST = 6
 } Config_LoRaConfig_ModemPreset;
 
-typedef enum _Config_BluetoothConfig_PairingMode { 
-    Config_BluetoothConfig_PairingMode_RANDOM_PIN = 0, 
-    Config_BluetoothConfig_PairingMode_FIXED_PIN = 1, 
-    Config_BluetoothConfig_PairingMode_NO_PIN = 2 
+typedef enum _Config_BluetoothConfig_PairingMode {
+    /* Device generates a random pin that will be shown on the screen of the device for pairing */
+    Config_BluetoothConfig_PairingMode_RANDOM_PIN = 0,
+    /* Device requires a specified fixed pin for pairing */
+    Config_BluetoothConfig_PairingMode_FIXED_PIN = 1,
+    /* Device requires no pin for pairing */
+    Config_BluetoothConfig_PairingMode_NO_PIN = 2
 } Config_BluetoothConfig_PairingMode;
 
 /* Struct definitions */
-typedef struct _Config_BluetoothConfig { 
-    bool enabled;
-    Config_BluetoothConfig_PairingMode mode;
-    uint32_t fixed_pin;
-} Config_BluetoothConfig;
-
-typedef struct _Config_DeviceConfig { 
+/* Configuration */
+typedef struct _Config_DeviceConfig {
+    /* Sets the role of node */
     Config_DeviceConfig_Role role;
+    /* Disabling this will disable the SerialConsole by not initilizing the StreamAPI */
     bool serial_enabled;
+    /* By default we turn off logging as soon as an API client connects (to keep shared serial link quiet).
+ Set this to true to leave the debug log outputting even when API is active. */
     bool debug_log_enabled;
+    /* For boards without a hard wired button, this is the pin number that will be used
+ Boards that have more than one button can swap the function with this one. defaults to BUTTON_PIN if defined. */
     uint32_t button_gpio;
+    /* For boards without a PWM buzzer, this is the pin number that will be used
+ Defaults to PIN_BUZZER if defined. */
     uint32_t buzzer_gpio;
 } Config_DeviceConfig;
 
-typedef struct _Config_DisplayConfig { 
-    uint32_t screen_on_secs;
-    Config_DisplayConfig_GpsCoordinateFormat gps_format;
-    uint32_t auto_screen_carousel_secs;
-    bool compass_north_top;
-    bool flip_screen;
-    Config_DisplayConfig_DisplayUnits units;
-    Config_DisplayConfig_OledType oled;
-} Config_DisplayConfig;
-
-typedef struct _Config_LoRaConfig { 
-    bool use_preset;
-    Config_LoRaConfig_ModemPreset modem_preset;
-    uint16_t bandwidth;
-    uint32_t spread_factor;
-    uint8_t coding_rate;
-    float frequency_offset;
-    Config_LoRaConfig_RegionCode region;
-    uint32_t hop_limit;
-    bool tx_enabled;
-    int8_t tx_power;
-    uint16_t channel_num;
-    pb_size_t ignore_incoming_count;
-    uint32_t ignore_incoming[3];
-} Config_LoRaConfig;
-
-typedef struct _Config_NetworkConfig_IpV4Config { 
-    uint32_t ip;
-    uint32_t gateway;
-    uint32_t subnet;
-    uint32_t dns;
-} Config_NetworkConfig_IpV4Config;
-
-typedef struct _Config_PositionConfig { 
+/* Position Config */
+typedef struct _Config_PositionConfig {
+    /* We should send our position this often (but only if it has changed significantly)
+ Defaults to 15 minutes */
     uint32_t position_broadcast_secs;
+    /* Adaptive position braoadcast, which is now the default. */
     bool position_broadcast_smart_enabled;
+    /* If set, this node is at a fixed position.
+ We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
+ The lat/lon/alt can be set by an internal GPS or with the help of the app. */
     bool fixed_position;
+    /* Is GPS enabled for this node? */
     bool gps_enabled;
+    /* How often should we try to get GPS position (in seconds)
+ or zero for the default of once every 30 seconds
+ or a very large value (maxint) to update only once at boot. */
     uint32_t gps_update_interval;
+    /* How long should we try to get our position during each gps_update_interval attempt?  (in seconds)
+ Or if zero, use the default of 30 seconds.
+ If we don't get a new gps fix in that time, the gps will be put into sleep until  the next gps_update_rate
+ window. */
     uint32_t gps_attempt_time;
+    /* Bit field of boolean configuration options for POSITION messages
+ (bitwise OR of PositionFlags) */
     uint32_t position_flags;
+    /* (Re)define GPS_RX_PIN for your board. */
     uint32_t rx_gpio;
+    /* (Re)define GPS_TX_PIN for your board. */
     uint32_t tx_gpio;
 } Config_PositionConfig;
 
-typedef struct _Config_PowerConfig { 
+/* Power Config\
+ See [Power Config](/docs/settings/config/power) for additional power config details. */
+typedef struct _Config_PowerConfig {
+    /* If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in
+ we should try to minimize power consumption as much as possible.
+ YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).
+ Advanced Option */
     bool is_power_saving;
+    /* If non-zero, the device will fully power off this many seconds after external power is removed. */
     uint32_t on_battery_shutdown_after_secs;
+    /* Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
+ Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
+ Should be set to floating point value between 2 and 4
+ Fixes issues on Heltec v2 */
     float adc_multiplier_override;
+    /* Wait Bluetooth Seconds
+ The number of seconds for to wait before turning off BLE in No Bluetooth states
+ 0 for default of 1 minute */
     uint32_t wait_bluetooth_secs;
+    /* Mesh Super Deep Sleep Timeout Seconds
+ While in Light Sleep if this value is exceeded we will lower into super deep sleep 
+ for sds_secs (default 1 year) or a button press
+ 0 for default of two hours, MAXUINT for disabled */
     uint32_t mesh_sds_timeout_secs;
+    /* Super Deep Sleep Seconds
+ While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
+ for this value (default 1 year) or a button press
+ 0 for default of one year */
     uint32_t sds_secs;
+    /* Light Sleep Seconds
+ In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
+ ESP32 Only
+ 0 for default of 300 */
     uint32_t ls_secs;
+    /* Minimum Wake Seconds
+ While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
+ 0 for default of 10 seconds */
     uint32_t min_wake_secs;
 } Config_PowerConfig;
 
-typedef struct _Config_NetworkConfig { 
+typedef struct _Config_NetworkConfig_IpV4Config {
+    /* Static IP address */
+    uint32_t ip;
+    /* Static gateway address */
+    uint32_t gateway;
+    /* Static subnet mask */
+    uint32_t subnet;
+    /* Static DNS server address */
+    uint32_t dns;
+} Config_NetworkConfig_IpV4Config;
+
+/* Network Config */
+typedef struct _Config_NetworkConfig {
+    /* Enable WiFi (disables Bluetooth) */
     bool wifi_enabled;
+    /* If set, this node will try to join the specified wifi network and
+ acquire an address via DHCP */
     char wifi_ssid[33];
+    /* If set, will be use to authenticate to the named wifi */
     char wifi_psk[64];
+    /* NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org` */
     char ntp_server[33];
+    /* Enable Ethernet */
     bool eth_enabled;
+    /* acquire an address via DHCP or assign static */
     Config_NetworkConfig_EthMode eth_mode;
+    /* struct to keep static address */
     bool has_ipv4_config;
     Config_NetworkConfig_IpV4Config ipv4_config;
 } Config_NetworkConfig;
 
-typedef struct _Config { 
+/* Display Config */
+typedef struct _Config_DisplayConfig {
+    /* Number of seconds the screen stays on after pressing the user button or receiving a message
+ 0 for default of one minute MAXUINT for always on */
+    uint32_t screen_on_secs;
+    /* How the GPS coordinates are formatted on the OLED screen. */
+    Config_DisplayConfig_GpsCoordinateFormat gps_format;
+    /* Automatically toggles to the next page on the screen like a carousel, based the specified interval in seconds.
+ Potentially useful for devices without user buttons. */
+    uint32_t auto_screen_carousel_secs;
+    /* If this is set, the displayed compass will always point north. if unset, the old behaviour 
+ (top of display is heading direction) is used. */
+    bool compass_north_top;
+    /* Flip screen vertically, for cases that mount the screen upside down */
+    bool flip_screen;
+    /* Perferred display units */
+    Config_DisplayConfig_DisplayUnits units;
+    /* Override auto-detect in screen */
+    Config_DisplayConfig_OledType oled;
+} Config_DisplayConfig;
+
+/* Lora Config */
+typedef struct _Config_LoRaConfig {
+    /* When enabled, the `modem_preset` fields will be adheared to, else the `bandwidth`/`spread_factor`/`coding_rate`
+ will be taked from their respective manually defined fields */
+    bool use_preset;
+    /* Either modem_config or bandwidth/spreading/coding will be specified - NOT BOTH.
+ As a heuristic: If bandwidth is specified, do not use modem_config.
+ Because protobufs take ZERO space when the value is zero this works out nicely.
+ This value is replaced by bandwidth/spread_factor/coding_rate.
+ If you'd like to experiment with other options add them to MeshRadio.cpp in the device code. */
+    Config_LoRaConfig_ModemPreset modem_preset;
+    /* Bandwidth in MHz
+ Certain bandwidth numbers are 'special' and will be converted to the
+ appropriate floating point value: 31 -> 31.25MHz */
+    uint16_t bandwidth;
+    /* A number from 7 to 12.
+ Indicates number of chirps per symbol as 1<<spread_factor. */
+    uint32_t spread_factor;
+    /* The denominator of the coding rate.
+ ie for 4/5, the value is 5. 4/8 the value is 8. */
+    uint8_t coding_rate;
+    /* This parameter is for advanced users with advanced test equipment, we do not recommend most users use it.
+ A frequency offset that is added to to the calculated band center frequency.
+ Used to correct for crystal calibration errors. */
+    float frequency_offset;
+    /* The region code for the radio (US, CN, EU433, etc...) */
+    Config_LoRaConfig_RegionCode region;
+    /* Maximum number of hops. This can't be greater than 7.
+ Default of 3 */
+    uint32_t hop_limit;
+    /* Disable TX from the LoRa radio. Useful for hot-swapping antennas and other tests.
+ Defaults to false */
+    bool tx_enabled;
+    /* If zero then, use default max legal continuous power (ie. something that won't
+ burn out the radio hardware)
+ In most cases you should use zero here.
+ Units are in dBm. */
+    int8_t tx_power;
+    /* This is controlling the actual hardware frequency the radio is transmitting on.
+ Most users should never need to be exposed to this field/concept.
+ A channel number between 1 and NUM_CHANNELS (whatever the max is in the current region).
+ If ZERO then the rule is "use the old channel name hash based
+ algorithm to derive the channel number")
+ If using the hash algorithm the channel number will be: hash(channel_name) %
+ NUM_CHANNELS (Where num channels depends on the regulatory region). */
+    uint16_t channel_num;
+    /* If true, duty cycle limits will be exceeded and thus you're possibly not following 
+ the local regulations if you're not a HAM.
+ Has no effect if the duty cycle of the used region is 100%. */
+    bool override_duty_cycle;
+    /* For testing it is useful sometimes to force a node to never listen to
+ particular other nodes (simulating radio out of range). All nodenums listed
+ in ignore_incoming will have packets they send droped on receive (by router.cpp) */
+    pb_size_t ignore_incoming_count;
+    uint32_t ignore_incoming[3];
+} Config_LoRaConfig;
+
+typedef struct _Config_BluetoothConfig {
+    /* Enable Bluetooth on the device */
+    bool enabled;
+    /* Determines the pairing strategy for the device */
+    Config_BluetoothConfig_PairingMode mode;
+    /* Specified pin for PairingMode.FixedPin */
+    uint32_t fixed_pin;
+} Config_BluetoothConfig;
+
+typedef struct _Config {
     pb_size_t which_payload_variant;
     union {
         Config_DeviceConfig device;
@@ -185,6 +388,10 @@ typedef struct _Config {
 } Config;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _Config_DeviceConfig_Role_MIN Config_DeviceConfig_Role_CLIENT
 #define _Config_DeviceConfig_Role_MAX Config_DeviceConfig_Role_ROUTER_CLIENT
@@ -223,9 +430,22 @@ typedef struct _Config {
 #define _Config_BluetoothConfig_PairingMode_ARRAYSIZE ((Config_BluetoothConfig_PairingMode)(Config_BluetoothConfig_PairingMode_NO_PIN+1))
 
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+#define Config_DeviceConfig_role_ENUMTYPE Config_DeviceConfig_Role
+
+
+
+#define Config_NetworkConfig_eth_mode_ENUMTYPE Config_NetworkConfig_EthMode
+
+
+#define Config_DisplayConfig_gps_format_ENUMTYPE Config_DisplayConfig_GpsCoordinateFormat
+#define Config_DisplayConfig_units_ENUMTYPE Config_DisplayConfig_DisplayUnits
+#define Config_DisplayConfig_oled_ENUMTYPE Config_DisplayConfig_OledType
+
+#define Config_LoRaConfig_modem_preset_ENUMTYPE Config_LoRaConfig_ModemPreset
+#define Config_LoRaConfig_region_ENUMTYPE Config_LoRaConfig_RegionCode
+
+#define Config_BluetoothConfig_mode_ENUMTYPE Config_BluetoothConfig_PairingMode
+
 
 /* Initializer values for message structs */
 #define Config_init_default                      {0, {Config_DeviceConfig_init_default}}
@@ -235,7 +455,7 @@ extern "C" {
 #define Config_NetworkConfig_init_default        {0, "", "", "", 0, _Config_NetworkConfig_EthMode_MIN, false, Config_NetworkConfig_IpV4Config_init_default}
 #define Config_NetworkConfig_IpV4Config_init_default {0, 0, 0, 0}
 #define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN}
-#define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, {0, 0, 0}}
+#define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
 #define Config_BluetoothConfig_init_default      {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
 #define Config_init_zero                         {0, {Config_DeviceConfig_init_zero}}
 #define Config_DeviceConfig_init_zero            {_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0}
@@ -244,18 +464,43 @@ extern "C" {
 #define Config_NetworkConfig_init_zero           {0, "", "", "", 0, _Config_NetworkConfig_EthMode_MIN, false, Config_NetworkConfig_IpV4Config_init_zero}
 #define Config_NetworkConfig_IpV4Config_init_zero {0, 0, 0, 0}
 #define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN}
-#define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, {0, 0, 0}}
+#define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
 #define Config_BluetoothConfig_init_zero         {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
-#define Config_BluetoothConfig_enabled_tag       1
-#define Config_BluetoothConfig_mode_tag          2
-#define Config_BluetoothConfig_fixed_pin_tag     3
 #define Config_DeviceConfig_role_tag             1
 #define Config_DeviceConfig_serial_enabled_tag   2
 #define Config_DeviceConfig_debug_log_enabled_tag 3
 #define Config_DeviceConfig_button_gpio_tag      4
 #define Config_DeviceConfig_buzzer_gpio_tag      5
+#define Config_PositionConfig_position_broadcast_secs_tag 1
+#define Config_PositionConfig_position_broadcast_smart_enabled_tag 2
+#define Config_PositionConfig_fixed_position_tag 3
+#define Config_PositionConfig_gps_enabled_tag    4
+#define Config_PositionConfig_gps_update_interval_tag 5
+#define Config_PositionConfig_gps_attempt_time_tag 6
+#define Config_PositionConfig_position_flags_tag 7
+#define Config_PositionConfig_rx_gpio_tag        8
+#define Config_PositionConfig_tx_gpio_tag        9
+#define Config_PowerConfig_is_power_saving_tag   1
+#define Config_PowerConfig_on_battery_shutdown_after_secs_tag 2
+#define Config_PowerConfig_adc_multiplier_override_tag 3
+#define Config_PowerConfig_wait_bluetooth_secs_tag 4
+#define Config_PowerConfig_mesh_sds_timeout_secs_tag 5
+#define Config_PowerConfig_sds_secs_tag          6
+#define Config_PowerConfig_ls_secs_tag           7
+#define Config_PowerConfig_min_wake_secs_tag     8
+#define Config_NetworkConfig_IpV4Config_ip_tag   1
+#define Config_NetworkConfig_IpV4Config_gateway_tag 2
+#define Config_NetworkConfig_IpV4Config_subnet_tag 3
+#define Config_NetworkConfig_IpV4Config_dns_tag  4
+#define Config_NetworkConfig_wifi_enabled_tag    1
+#define Config_NetworkConfig_wifi_ssid_tag       3
+#define Config_NetworkConfig_wifi_psk_tag        4
+#define Config_NetworkConfig_ntp_server_tag      5
+#define Config_NetworkConfig_eth_enabled_tag     6
+#define Config_NetworkConfig_eth_mode_tag        7
+#define Config_NetworkConfig_ipv4_config_tag     8
 #define Config_DisplayConfig_screen_on_secs_tag  1
 #define Config_DisplayConfig_gps_format_tag      2
 #define Config_DisplayConfig_auto_screen_carousel_secs_tag 3
@@ -274,35 +519,11 @@ extern "C" {
 #define Config_LoRaConfig_tx_enabled_tag         9
 #define Config_LoRaConfig_tx_power_tag           10
 #define Config_LoRaConfig_channel_num_tag        11
+#define Config_LoRaConfig_override_duty_cycle_tag 12
 #define Config_LoRaConfig_ignore_incoming_tag    103
-#define Config_NetworkConfig_IpV4Config_ip_tag   1
-#define Config_NetworkConfig_IpV4Config_gateway_tag 2
-#define Config_NetworkConfig_IpV4Config_subnet_tag 3
-#define Config_NetworkConfig_IpV4Config_dns_tag  4
-#define Config_PositionConfig_position_broadcast_secs_tag 1
-#define Config_PositionConfig_position_broadcast_smart_enabled_tag 2
-#define Config_PositionConfig_fixed_position_tag 3
-#define Config_PositionConfig_gps_enabled_tag    4
-#define Config_PositionConfig_gps_update_interval_tag 5
-#define Config_PositionConfig_gps_attempt_time_tag 6
-#define Config_PositionConfig_position_flags_tag 7
-#define Config_PositionConfig_rx_gpio_tag        8
-#define Config_PositionConfig_tx_gpio_tag        9
-#define Config_PowerConfig_is_power_saving_tag   1
-#define Config_PowerConfig_on_battery_shutdown_after_secs_tag 2
-#define Config_PowerConfig_adc_multiplier_override_tag 3
-#define Config_PowerConfig_wait_bluetooth_secs_tag 4
-#define Config_PowerConfig_mesh_sds_timeout_secs_tag 5
-#define Config_PowerConfig_sds_secs_tag          6
-#define Config_PowerConfig_ls_secs_tag           7
-#define Config_PowerConfig_min_wake_secs_tag     8
-#define Config_NetworkConfig_wifi_enabled_tag    1
-#define Config_NetworkConfig_wifi_ssid_tag       3
-#define Config_NetworkConfig_wifi_psk_tag        4
-#define Config_NetworkConfig_ntp_server_tag      5
-#define Config_NetworkConfig_eth_enabled_tag     6
-#define Config_NetworkConfig_eth_mode_tag        7
-#define Config_NetworkConfig_ipv4_config_tag     8
+#define Config_BluetoothConfig_enabled_tag       1
+#define Config_BluetoothConfig_mode_tag          2
+#define Config_BluetoothConfig_fixed_pin_tag     3
 #define Config_device_tag                        1
 #define Config_position_tag                      2
 #define Config_power_tag                         3
@@ -407,6 +628,7 @@ X(a, STATIC,   SINGULAR, UINT32,   hop_limit,         8) \
 X(a, STATIC,   SINGULAR, BOOL,     tx_enabled,        9) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,         10) \
 X(a, STATIC,   SINGULAR, UINT32,   channel_num,      11) \
+X(a, STATIC,   SINGULAR, BOOL,     override_duty_cycle,  12) \
 X(a, STATIC,   REPEATED, UINT32,   ignore_incoming, 103)
 #define Config_LoRaConfig_CALLBACK NULL
 #define Config_LoRaConfig_DEFAULT NULL
@@ -443,7 +665,7 @@ extern const pb_msgdesc_t Config_BluetoothConfig_msg;
 #define Config_BluetoothConfig_size              10
 #define Config_DeviceConfig_size                 18
 #define Config_DisplayConfig_size                22
-#define Config_LoRaConfig_size                   68
+#define Config_LoRaConfig_size                   70
 #define Config_NetworkConfig_IpV4Config_size     20
 #define Config_NetworkConfig_size                161
 #define Config_PositionConfig_size               42

src/mesh/generated/device_metadata.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "device_metadata.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/device_metadata.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_DEVICE_METADATA_PB_H_INCLUDED
 #define PB_DEVICE_METADATA_PB_H_INCLUDED
@@ -11,7 +11,7 @@
 
 /* Struct definitions */
 /* Device metadata response */
-typedef struct _DeviceMetadata { 
+typedef struct _DeviceMetadata {
     /* Device firmware version string */
     char firmware_version[18];
     /* Device state version */

src/mesh/generated/deviceonly.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "deviceonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/deviceonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_DEVICEONLY_PB_H_INCLUDED
 #define PB_DEVICEONLY_PB_H_INCLUDED
@@ -13,33 +13,22 @@
 
 /* Enum definitions */
 /* TODO: REPLACE */
-typedef enum _ScreenFonts { 
+typedef enum _ScreenFonts {
     /* TODO: REPLACE */
-    ScreenFonts_FONT_SMALL = 0, 
+    ScreenFonts_FONT_SMALL = 0,
     /* TODO: REPLACE */
-    ScreenFonts_FONT_MEDIUM = 1, 
+    ScreenFonts_FONT_MEDIUM = 1,
     /* TODO: REPLACE */
-    ScreenFonts_FONT_LARGE = 2 
+    ScreenFonts_FONT_LARGE = 2
 } ScreenFonts;
 
 /* Struct definitions */
-/* The on-disk saved channels */
-typedef struct _ChannelFile { 
-    /* The channels our node knows about */
-    pb_size_t channels_count;
-    Channel channels[8];
-    /* A version integer used to invalidate old save files when we make
- incompatible changes This integer is set at build time and is private to
- NodeDB.cpp in the device code. */
-    uint32_t version;
-} ChannelFile;
-
 /* This message is never sent over the wire, but it is used for serializing DB
  state to flash in the device code
  FIXME, since we write this each time we enter deep sleep (and have infinite
  flash) it would be better to use some sort of append only data structure for
  the receive queue and use the preferences store for the other stuff */
-typedef struct _DeviceState { 
+typedef struct _DeviceState {
     /* Read only settings/info about this node */
     bool has_my_node;
     MyNodeInfo my_node;
@@ -68,11 +57,22 @@ typedef struct _DeviceState {
     bool did_gps_reset;
 } DeviceState;
 
+/* The on-disk saved channels */
+typedef struct _ChannelFile {
+    /* The channels our node knows about */
+    pb_size_t channels_count;
+    Channel channels[8];
+    /* A version integer used to invalidate old save files when we make
+ incompatible changes This integer is set at build time and is private to
+ NodeDB.cpp in the device code. */
+    uint32_t version;
+} ChannelFile;
+
 typedef PB_BYTES_ARRAY_T(2048) OEMStore_oem_icon_bits_t;
 typedef PB_BYTES_ARRAY_T(32) OEMStore_oem_aes_key_t;
 /* This can be used for customizing the firmware distribution. If populated,
  show a secondary bootup screen with cuatom logo and text for 2.5 seconds. */
-typedef struct _OEMStore { 
+typedef struct _OEMStore {
     /* The Logo width in Px */
     uint32_t oem_icon_width;
     /* The Logo height in Px */
@@ -88,15 +88,19 @@ typedef struct _OEMStore {
 } OEMStore;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _ScreenFonts_MIN ScreenFonts_FONT_SMALL
 #define _ScreenFonts_MAX ScreenFonts_FONT_LARGE
 #define _ScreenFonts_ARRAYSIZE ((ScreenFonts)(ScreenFonts_FONT_LARGE+1))
 
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+
+#define OEMStore_oem_font_ENUMTYPE ScreenFonts
+
 
 /* Initializer values for message structs */
 #define DeviceState_init_default                 {false, MyNodeInfo_init_default, false, User_init_default, 0, {NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default, NodeInfo_init_default}, 0, {MeshPacket_init_default}, false, MeshPacket_init_default, 0, 0, 0}
@@ -107,8 +111,6 @@ extern "C" {
 #define OEMStore_init_zero                       {0, 0, {0, {0}}, _ScreenFonts_MIN, "", {0, {0}}}
 
 /* Field tags (for use in manual encoding/decoding) */
-#define ChannelFile_channels_tag                 1
-#define ChannelFile_version_tag                  2
 #define DeviceState_my_node_tag                  2
 #define DeviceState_owner_tag                    3
 #define DeviceState_node_db_tag                  4
@@ -117,6 +119,8 @@ extern "C" {
 #define DeviceState_version_tag                  8
 #define DeviceState_no_save_tag                  9
 #define DeviceState_did_gps_reset_tag            11
+#define ChannelFile_channels_tag                 1
+#define ChannelFile_version_tag                  2
 #define OEMStore_oem_icon_width_tag              1
 #define OEMStore_oem_icon_height_tag             2
 #define OEMStore_oem_icon_bits_tag               3

src/mesh/generated/localonly.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "localonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/localonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_LOCALONLY_PB_H_INCLUDED
 #define PB_LOCALONLY_PB_H_INCLUDED
@@ -12,7 +12,7 @@
 #endif
 
 /* Struct definitions */
-typedef struct _LocalConfig { 
+typedef struct _LocalConfig {
     /* The part of the config that is specific to the Device */
     bool has_device;
     Config_DeviceConfig device;
@@ -40,7 +40,7 @@ typedef struct _LocalConfig {
     uint32_t version;
 } LocalConfig;
 
-typedef struct _LocalModuleConfig { 
+typedef struct _LocalModuleConfig {
     /* The part of the config that is specific to the MQTT module */
     bool has_mqtt;
     ModuleConfig_MQTTConfig mqtt;
@@ -150,8 +150,8 @@ extern const pb_msgdesc_t LocalModuleConfig_msg;
 #define LocalModuleConfig_fields &LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define LocalConfig_size                         385
-#define LocalModuleConfig_size                   361
+#define LocalConfig_size                         387
+#define LocalModuleConfig_size                   376
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/mesh.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "mesh.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/mesh.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_MESH_PB_H_INCLUDED
 #define PB_MESH_PB_H_INCLUDED
@@ -19,348 +19,247 @@
  bin/build-all.sh script.
  Because they will be used to find firmware filenames in the android app for OTA updates.
  To match the old style filenames, _ is converted to -, p is converted to . */
-typedef enum _HardwareModel { 
+typedef enum _HardwareModel {
     /* TODO: REPLACE */
-    HardwareModel_UNSET = 0, 
+    HardwareModel_UNSET = 0,
     /* TODO: REPLACE */
-    HardwareModel_TLORA_V2 = 1, 
+    HardwareModel_TLORA_V2 = 1,
     /* TODO: REPLACE */
-    HardwareModel_TLORA_V1 = 2, 
+    HardwareModel_TLORA_V1 = 2,
     /* TODO: REPLACE */
-    HardwareModel_TLORA_V2_1_1P6 = 3, 
+    HardwareModel_TLORA_V2_1_1P6 = 3,
     /* TODO: REPLACE */
-    HardwareModel_TBEAM = 4, 
+    HardwareModel_TBEAM = 4,
     /* The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
  (see HELTEC_V2 for the new version). */
-    HardwareModel_HELTEC_V2_0 = 5, 
+    HardwareModel_HELTEC_V2_0 = 5,
     /* TODO: REPLACE */
-    HardwareModel_TBEAM_V0P7 = 6, 
+    HardwareModel_TBEAM_V0P7 = 6,
     /* TODO: REPLACE */
-    HardwareModel_T_ECHO = 7, 
+    HardwareModel_T_ECHO = 7,
     /* TODO: REPLACE */
-    HardwareModel_TLORA_V1_1P3 = 8, 
+    HardwareModel_TLORA_V1_1P3 = 8,
     /* TODO: REPLACE */
-    HardwareModel_RAK4631 = 9, 
+    HardwareModel_RAK4631 = 9,
     /* The new version of the heltec WiFi_Lora_32_V2 board that has battery sensing hooked to GPIO 37.
  Sadly they did not update anything on the silkscreen to identify this board */
-    HardwareModel_HELTEC_V2_1 = 10, 
+    HardwareModel_HELTEC_V2_1 = 10,
     /* Ancient heltec WiFi_Lora_32 board */
-    HardwareModel_HELTEC_V1 = 11, 
+    HardwareModel_HELTEC_V1 = 11,
     /* New T-BEAM with ESP32-S3 CPU */
-    HardwareModel_LILYGO_TBEAM_S3_CORE = 12, 
+    HardwareModel_LILYGO_TBEAM_S3_CORE = 12,
     /* RAK WisBlock ESP32 core: https://docs.rakwireless.com/Product-Categories/WisBlock/RAK11200/Overview/ */
-    HardwareModel_RAK11200 = 13, 
+    HardwareModel_RAK11200 = 13,
     /* B&Q Consulting Nano Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:nano */
-    HardwareModel_NANO_G1 = 14, 
+    HardwareModel_NANO_G1 = 14,
     /* TODO: REPLACE */
-    HardwareModel_TLORA_V2_1_1P8 = 15, 
+    HardwareModel_TLORA_V2_1_1P8 = 15,
+    /* TODO: REPLACE */
+    HardwareModel_TLORA_T3_S3 = 16,
     /* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station */
-    HardwareModel_STATION_G1 = 25, 
+    HardwareModel_STATION_G1 = 25,
     /* Less common/prototype boards listed here (needs one more byte over the air) */
-    HardwareModel_LORA_RELAY_V1 = 32, 
+    HardwareModel_LORA_RELAY_V1 = 32,
     /* TODO: REPLACE */
-    HardwareModel_NRF52840DK = 33, 
+    HardwareModel_NRF52840DK = 33,
     /* TODO: REPLACE */
-    HardwareModel_PPR = 34, 
+    HardwareModel_PPR = 34,
     /* TODO: REPLACE */
-    HardwareModel_GENIEBLOCKS = 35, 
+    HardwareModel_GENIEBLOCKS = 35,
     /* TODO: REPLACE */
-    HardwareModel_NRF52_UNKNOWN = 36, 
+    HardwareModel_NRF52_UNKNOWN = 36,
     /* TODO: REPLACE */
-    HardwareModel_PORTDUINO = 37, 
+    HardwareModel_PORTDUINO = 37,
     /* The simulator built into the android app */
-    HardwareModel_ANDROID_SIM = 38, 
+    HardwareModel_ANDROID_SIM = 38,
     /* Custom DIY device based on @NanoVHF schematics: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/Schematics */
-    HardwareModel_DIY_V1 = 39, 
+    HardwareModel_DIY_V1 = 39,
     /* nRF52840 Dongle : https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle/ */
-    HardwareModel_NRF52840_PCA10059 = 40, 
+    HardwareModel_NRF52840_PCA10059 = 40,
     /* Custom Disaster Radio esp32 v3 device https://github.com/sudomesh/disaster-radio/tree/master/hardware/board_esp32_v3 */
-    HardwareModel_DR_DEV = 41, 
+    HardwareModel_DR_DEV = 41,
     /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
-    HardwareModel_M5STACK = 42, 
+    HardwareModel_M5STACK = 42,
     /* New Heltec LoRA32 with ESP32-S3 CPU */
-    HardwareModel_HELTEC_V3 = 43, 
+    HardwareModel_HELTEC_V3 = 43,
     /* New Heltec Wireless Stick Lite with ESP32-S3 CPU */
-    HardwareModel_HELTEC_WSL_V3 = 44, 
+    HardwareModel_HELTEC_WSL_V3 = 44,
     /* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. */
-    HardwareModel_PRIVATE_HW = 255 
+    HardwareModel_PRIVATE_HW = 255
 } HardwareModel;
 
 /* Shared constants between device and phone */
-typedef enum _Constants { 
+typedef enum _Constants {
     /* First enum must be zero, and we are just using this enum to
  pass int constants between two very different environments */
-    Constants_ZERO = 0, 
+    Constants_ZERO = 0,
     /* From mesh.options
  note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
  outside of this envelope */
-    Constants_DATA_PAYLOAD_LEN = 237 
+    Constants_DATA_PAYLOAD_LEN = 237
 } Constants;
 
 /* Error codes for critical errors
  The device might report these fault codes on the screen.
  If you encounter a fault code, please post on the meshtastic.discourse.group
  and we'll try to help. */
-typedef enum _CriticalErrorCode { 
+typedef enum _CriticalErrorCode {
     /* TODO: REPLACE */
-    CriticalErrorCode_NONE = 0, 
+    CriticalErrorCode_NONE = 0,
     /* A software bug was detected while trying to send lora */
-    CriticalErrorCode_TX_WATCHDOG = 1, 
+    CriticalErrorCode_TX_WATCHDOG = 1,
     /* A software bug was detected on entry to sleep */
-    CriticalErrorCode_SLEEP_ENTER_WAIT = 2, 
+    CriticalErrorCode_SLEEP_ENTER_WAIT = 2,
     /* No Lora radio hardware could be found */
-    CriticalErrorCode_NO_RADIO = 3, 
+    CriticalErrorCode_NO_RADIO = 3,
     /* Not normally used */
-    CriticalErrorCode_UNSPECIFIED = 4, 
+    CriticalErrorCode_UNSPECIFIED = 4,
     /* We failed while configuring a UBlox GPS */
-    CriticalErrorCode_UBLOX_UNIT_FAILED = 5, 
+    CriticalErrorCode_UBLOX_UNIT_FAILED = 5,
     /* This board was expected to have a power management chip and it is missing or broken */
-    CriticalErrorCode_NO_AXP192 = 6, 
+    CriticalErrorCode_NO_AXP192 = 6,
     /* The channel tried to set a radio setting which is not supported by this chipset,
  radio comms settings are now undefined. */
-    CriticalErrorCode_INVALID_RADIO_SETTING = 7, 
+    CriticalErrorCode_INVALID_RADIO_SETTING = 7,
     /* Radio transmit hardware failure. We sent data to the radio chip, but it didn't
  reply with an interrupt. */
-    CriticalErrorCode_TRANSMIT_FAILED = 8, 
+    CriticalErrorCode_TRANSMIT_FAILED = 8,
     /* We detected that the main CPU voltage dropped below the minumum acceptable value */
-    CriticalErrorCode_BROWNOUT = 9, 
+    CriticalErrorCode_BROWNOUT = 9,
     /* Selftest of SX1262 radio chip failed */
-    CriticalErrorCode_SX1262_FAILURE = 10, 
+    CriticalErrorCode_SX1262_FAILURE = 10,
     /* A (likely software but possibly hardware) failure was detected while trying to send packets.
  If this occurs on your board, please post in the forum so that we can ask you to collect some information to allow fixing this bug */
-    CriticalErrorCode_RADIO_SPI_BUG = 11 
+    CriticalErrorCode_RADIO_SPI_BUG = 11
 } CriticalErrorCode;
 
-/* Note: these enum names must EXACTLY match the string used in the device
- bin/build-all.sh script.
- Because they will be used to find firmware filenames in the android app for OTA updates.
- To match the old style filenames, _ is converted to -, p is converted to . */
-typedef enum _Position_LocSource { 
+/* How the location was acquired: manual, onboard GPS, external (EUD) GPS */
+typedef enum _Position_LocSource {
     /* TODO: REPLACE */
-    Position_LocSource_LOC_UNSET = 0, 
+    Position_LocSource_LOC_UNSET = 0,
     /* TODO: REPLACE */
-    Position_LocSource_LOC_MANUAL = 1, 
+    Position_LocSource_LOC_MANUAL = 1,
     /* TODO: REPLACE */
-    Position_LocSource_LOC_INTERNAL = 2, 
+    Position_LocSource_LOC_INTERNAL = 2,
     /* TODO: REPLACE */
-    Position_LocSource_LOC_EXTERNAL = 3 
+    Position_LocSource_LOC_EXTERNAL = 3
 } Position_LocSource;
 
-/* Shared constants between device and phone */
-typedef enum _Position_AltSource { 
-    /* First enum must be zero, and we are just using this enum to
- pass int constants between two very different environments */
-    Position_AltSource_ALT_UNSET = 0, 
-    /* From mesh.options
- note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
- outside of this envelope */
-    Position_AltSource_ALT_MANUAL = 1, 
-    Position_AltSource_ALT_INTERNAL = 2, 
-    Position_AltSource_ALT_EXTERNAL = 3, 
-    Position_AltSource_ALT_BAROMETRIC = 4 
+/* How the altitude was acquired: manual, GPS int/ext, etc
+ Default: same as location_source if present */
+typedef enum _Position_AltSource {
+    /* TODO: REPLACE */
+    Position_AltSource_ALT_UNSET = 0,
+    /* TODO: REPLACE */
+    Position_AltSource_ALT_MANUAL = 1,
+    /* TODO: REPLACE */
+    Position_AltSource_ALT_INTERNAL = 2,
+    /* TODO: REPLACE */
+    Position_AltSource_ALT_EXTERNAL = 3,
+    /* TODO: REPLACE */
+    Position_AltSource_ALT_BAROMETRIC = 4
 } Position_AltSource;
 
-/* Note: these enum names must EXACTLY match the string used in the device
- bin/build-all.sh script.
- Because they will be used to find firmware filenames in the android app for OTA updates.
- To match the old style filenames, _ is converted to -, p is converted to . */
-typedef enum _Routing_Error { 
+/* A failure in delivering a message (usually used for routing control messages, but might be provided in addition to ack.fail_id to provide
+ details on the type of failure). */
+typedef enum _Routing_Error {
+    /* This message is not a failure */
+    Routing_Error_NONE = 0,
+    /* Our node doesn't have a route to the requested destination anymore. */
+    Routing_Error_NO_ROUTE = 1,
+    /* We received a nak while trying to forward on your behalf */
+    Routing_Error_GOT_NAK = 2,
     /* TODO: REPLACE */
-    Routing_Error_NONE = 0, 
-    /* TODO: REPLACE */
-    Routing_Error_NO_ROUTE = 1, 
-    /* TODO: REPLACE */
-    Routing_Error_GOT_NAK = 2, 
-    /* TODO: REPLACE */
-    Routing_Error_TIMEOUT = 3, 
-    /* TODO: REPLACE */
-    Routing_Error_NO_INTERFACE = 4, 
-    /* The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
- (see HELTEC_V2 for the new version). */
-    Routing_Error_MAX_RETRANSMIT = 5, 
-    /* TODO: REPLACE */
-    Routing_Error_NO_CHANNEL = 6, 
-    /* TODO: REPLACE */
-    Routing_Error_TOO_LARGE = 7, 
-    /* TODO: REPLACE */
-    Routing_Error_NO_RESPONSE = 8, 
-    /* TODO: REPLACE */
-    Routing_Error_BAD_REQUEST = 32, 
-    /* The new version of the heltec WiFi_Lora_32_V2 board that has battery sensing hooked to GPIO 37.
- Sadly they did not update anything on the silkscreen to identify this board */
-    Routing_Error_NOT_AUTHORIZED = 33 
+    Routing_Error_TIMEOUT = 3,
+    /* No suitable interface could be found for delivering this packet */
+    Routing_Error_NO_INTERFACE = 4,
+    /* We reached the max retransmission count (typically for naive flood routing) */
+    Routing_Error_MAX_RETRANSMIT = 5,
+    /* No suitable channel was found for sending this packet (i.e. was requested channel index disabled?) */
+    Routing_Error_NO_CHANNEL = 6,
+    /* The packet was too big for sending (exceeds interface MTU after encoding) */
+    Routing_Error_TOO_LARGE = 7,
+    /* The request had want_response set, the request reached the destination node, but no service on that node wants to send a response
+ (possibly due to bad channel permissions) */
+    Routing_Error_NO_RESPONSE = 8,
+    /* Cannot send currently because duty cycle regulations will be violated. */
+    Routing_Error_DUTY_CYCLE_LIMIT = 9,
+    /* The application layer service on the remote node received your request, but considered your request somehow invalid */
+    Routing_Error_BAD_REQUEST = 32,
+    /* The application layer service on the remote node received your request, but considered your request not authorized
+ (i.e you did not send the request on the required bound channel) */
+    Routing_Error_NOT_AUTHORIZED = 33
 } Routing_Error;
 
-/* Note: these enum names must EXACTLY match the string used in the device
- bin/build-all.sh script.
- Because they will be used to find firmware filenames in the android app for OTA updates.
- To match the old style filenames, _ is converted to -, p is converted to . */
-typedef enum _MeshPacket_Priority { 
+/* The priority of this message for sending.
+ Higher priorities are sent first (when managing the transmit queue).
+ This field is never sent over the air, it is only used internally inside of a local device node.
+ API clients (either on the local node or connected directly to the node)
+ can set this parameter if necessary.
+ (values must be <= 127 to keep protobuf field to one byte in size.
+ Detailed background on this field:
+ I noticed a funny side effect of lora being so slow: Usually when making
+ a protocol there isn’t much need to use message priority to change the order
+ of transmission (because interfaces are fairly fast).
+ But for lora where packets can take a few seconds each, it is very important
+ to make sure that critical packets are sent ASAP.
+ In the case of meshtastic that means we want to send protocol acks as soon as possible
+ (to prevent unneeded retransmissions), we want routing messages to be sent next,
+ then messages marked as reliable and finally ‘background’ packets like periodic position updates.
+ So I bit the bullet and implemented a new (internal - not sent over the air)
+ field in MeshPacket called ‘priority’.
+ And the transmission queue in the router object is now a priority queue. */
+typedef enum _MeshPacket_Priority {
+    /* Treated as Priority.DEFAULT */
+    MeshPacket_Priority_UNSET = 0,
     /* TODO: REPLACE */
-    MeshPacket_Priority_UNSET = 0, 
+    MeshPacket_Priority_MIN = 1,
+    /* Background position updates are sent with very low priority -
+ if the link is super congested they might not go out at all */
+    MeshPacket_Priority_BACKGROUND = 10,
+    /* This priority is used for most messages that don't have a priority set */
+    MeshPacket_Priority_DEFAULT = 64,
+    /* If priority is unset but the message is marked as want_ack,
+ assume it is important and use a slightly higher priority */
+    MeshPacket_Priority_RELIABLE = 70,
+    /* Ack/naks are sent with very high priority to ensure that retransmission
+ stops as soon as possible */
+    MeshPacket_Priority_ACK = 120,
     /* TODO: REPLACE */
-    MeshPacket_Priority_MIN = 1, 
-    /* TODO: REPLACE */
-    MeshPacket_Priority_BACKGROUND = 10, 
-    /* TODO: REPLACE */
-    MeshPacket_Priority_DEFAULT = 64, 
-    /* TODO: REPLACE */
-    MeshPacket_Priority_RELIABLE = 70, 
-    /* The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
- (see HELTEC_V2 for the new version). */
-    MeshPacket_Priority_ACK = 120, 
-    /* TODO: REPLACE */
-    MeshPacket_Priority_MAX = 127 
+    MeshPacket_Priority_MAX = 127
 } MeshPacket_Priority;
 
-/* Shared constants between device and phone */
-typedef enum _MeshPacket_Delayed { 
-    /* First enum must be zero, and we are just using this enum to
- pass int constants between two very different environments */
-    MeshPacket_Delayed_NO_DELAY = 0, 
-    /* From mesh.options
- note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
- outside of this envelope */
-    MeshPacket_Delayed_DELAYED_BROADCAST = 1, 
-    MeshPacket_Delayed_DELAYED_DIRECT = 2 
+/* Identify if this is a delayed packet */
+typedef enum _MeshPacket_Delayed {
+    /* If unset, the message is being sent in real time. */
+    MeshPacket_Delayed_NO_DELAY = 0,
+    /* The message is delayed and was originally a broadcast */
+    MeshPacket_Delayed_DELAYED_BROADCAST = 1,
+    /* The message is delayed and was originally a direct message */
+    MeshPacket_Delayed_DELAYED_DIRECT = 2
 } MeshPacket_Delayed;
 
-/* Note: these enum names must EXACTLY match the string used in the device
- bin/build-all.sh script.
- Because they will be used to find firmware filenames in the android app for OTA updates.
- To match the old style filenames, _ is converted to -, p is converted to . */
-typedef enum _LogRecord_Level { 
-    /* TODO: REPLACE */
-    LogRecord_Level_UNSET = 0, 
-    /* TODO: REPLACE */
-    LogRecord_Level_CRITICAL = 50, 
-    /* TODO: REPLACE */
-    LogRecord_Level_ERROR = 40, 
-    /* TODO: REPLACE */
-    LogRecord_Level_WARNING = 30, 
-    /* TODO: REPLACE */
-    LogRecord_Level_INFO = 20, 
-    /* The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
- (see HELTEC_V2 for the new version). */
-    LogRecord_Level_DEBUG = 10, 
-    /* TODO: REPLACE */
-    LogRecord_Level_TRACE = 5 
+/* Log levels, chosen to match python logging conventions. */
+typedef enum _LogRecord_Level {
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_UNSET = 0,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_CRITICAL = 50,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_ERROR = 40,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_WARNING = 30,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_INFO = 20,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_DEBUG = 10,
+    /* Log levels, chosen to match python logging conventions. */
+    LogRecord_Level_TRACE = 5
 } LogRecord_Level;
 
 /* Struct definitions */
-typedef PB_BYTES_ARRAY_T(237) Compressed_data_t;
-/* Compressed message payload */
-typedef struct _Compressed { 
-    /* PortNum to determine the how to handle the compressed payload. */
-    PortNum portnum;
-    /* Compressed data. */
-    Compressed_data_t data;
-} Compressed;
-
-typedef PB_BYTES_ARRAY_T(237) Data_payload_t;
-/* (Formerly called SubPacket)
- The payload portion fo a packet, this is the actual bytes that are sent
- inside a radio packet (because from/to are broken out by the comms library) */
-typedef struct _Data { 
-    /* Formerly named typ and of type Type */
-    PortNum portnum;
-    /* TODO: REPLACE */
-    Data_payload_t payload;
-    /* Not normally used, but for testing a sender can request that recipient
- responds in kind (i.e. if it received a position, it should unicast back it's position).
- Note: that if you set this on a broadcast you will receive many replies. */
-    bool want_response;
-    /* The address of the destination node.
- This field is is filled in by the mesh radio device software, application
- layer software should never need it.
- RouteDiscovery messages _must_ populate this.
- Other message types might need to if they are doing multihop routing. */
-    uint32_t dest;
-    /* The address of the original sender for this message.
- This field should _only_ be populated for reliable multihop packets (to keep
- packets small). */
-    uint32_t source;
-    /* Only used in routing or response messages.
- Indicates the original message ID that this message is reporting failure on. (formerly called original_id) */
-    uint32_t request_id;
-    /* If set, this message is intened to be a reply to a previously sent message with the defined id. */
-    uint32_t reply_id;
-    /* Defaults to false. If true, then what is in the payload should be treated as an emoji like giving
- a message a heart or poop emoji. */
-    uint32_t emoji;
-} Data;
-
-/* Debug output from the device.
- To minimize the size of records inside the device code, if a time/source/level is not set
- on the message it is assumed to be a continuation of the previously sent message.
- This allows the device code to use fixed maxlen 64 byte strings for messages,
- and then extend as needed by emitting multiple records. */
-typedef struct _LogRecord { 
-    /* Log levels, chosen to match python logging conventions. */
-    char message[64];
-    /* Seconds since 1970 - or 0 for unknown/unset */
-    uint32_t time;
-    /* Usually based on thread name - if known */
-    char source[8];
-    /* Not yet set */
-    LogRecord_Level level;
-} LogRecord;
-
-/* Unique local debugging info for this node
- Note: we don't include position or the user info, because that will come in the
- Sent to the phone in response to WantNodes. */
-typedef struct _MyNodeInfo { 
-    /* Tells the phone what our node number is, default starting value is
- lowbyte of macaddr, but it will be fixed if that is already in use */
-    uint32_t my_node_num;
-    /* Note: This flag merely means we detected a hardware GPS in our node.
- Not the same as UserPreferences.location_sharing */
-    bool has_gps;
-    /* The maximum number of 'software' channels that can be set on this node. */
-    uint32_t max_channels;
-    /* 0.0.5 etc... */
-    char firmware_version[18];
-    /* An error message we'd like to report back to the mothership through analytics.
- It indicates a serious bug occurred on the device, the device coped with it,
- but we still want to tell the devs about the bug.
- This field will be cleared after the phone reads MyNodeInfo
- (i.e. it will only be reported once)
- a numeric error code to go with error message, zero means no error */
-    CriticalErrorCode error_code;
-    /* A numeric error address (nonzero if available) */
-    uint32_t error_address;
-    /* The total number of errors this node has ever encountered
- (well - since the last time we discarded preferences) */
-    uint32_t error_count;
-    /* The total number of reboots this node has ever encountered
- (well - since the last time we discarded preferences) */
-    uint32_t reboot_count;
-    /* Calculated bitrate of the current channel (in Bytes Per Second) */
-    float bitrate;
-    /* How long before we consider a message abandoned and we can clear our
- caches of any messages in flight Normally quite large to handle the worst case
- message delivery time, 5 minutes.
- Formerly called FLOOD_EXPIRE_TIME in the device code */
-    uint32_t message_timeout_msec;
-    /* The minimum app version that can talk to this device.
- Phone/PC apps should compare this to their build number and if too low tell the user they must update their app */
-    uint32_t min_app_version;
-    /* 24 time windows of 1hr each with the airtime transmitted out of the device per hour. */
-    pb_size_t air_period_tx_count;
-    uint32_t air_period_tx[8];
-    /* 24 time windows of 1hr each with the airtime of valid packets for your mesh. */
-    pb_size_t air_period_rx_count;
-    uint32_t air_period_rx[8];
-    /* Is the device wifi capable? */
-    bool has_wifi;
-    /* Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise). */
-    float channel_utilization;
-    /* Percent of airtime for transmission used within the last hour. */
-    float air_util_tx;
-} MyNodeInfo;
-
 /* a gps position */
-typedef struct _Position { 
+typedef struct _Position {
     /* The new preferred location encoding, multiply by 1e-7 to get degrees
  in floating point */
     int32_t latitude_i;
@@ -427,13 +326,6 @@ typedef struct _Position {
     uint32_t seq_number;
 } Position;
 
-/* A message used in our Dynamic Source Routing protocol (RFC 4728 based) */
-typedef struct _RouteDiscovery { 
-    /* The list of nodenums this packet has visited so far */
-    pb_size_t route_count;
-    uint32_t route[8];
-} RouteDiscovery;
-
 /* Broadcast when a newly powered mesh node wants to find a node num it can use
  Sent from the phone over bluetooth to set the user id for the owner of this node.
  Also sent from nodes to each other when a new node signs on (so all clients can have this info)
@@ -454,7 +346,7 @@ typedef struct _RouteDiscovery {
  A few nodenums are reserved and will never be requested:
  0xff - broadcast
  0 through 3 - for future use */
-typedef struct _User { 
+typedef struct _User {
     /* A globally unique ID string for this user.
  In the case of Signal that would mean +16504442323, for the default macaddr derived id it would be !<8 hexidecimal bytes>.
  Note: app developers are encouraged to also use the following standard
@@ -479,8 +371,62 @@ typedef struct _User {
     bool is_licensed;
 } User;
 
+/* A message used in our Dynamic Source Routing protocol (RFC 4728 based) */
+typedef struct _RouteDiscovery {
+    /* The list of nodenums this packet has visited so far */
+    pb_size_t route_count;
+    uint32_t route[8];
+} RouteDiscovery;
+
+/* A Routing control Data packet handled by the routing module */
+typedef struct _Routing {
+    pb_size_t which_variant;
+    union {
+        /* A route request going from the requester */
+        RouteDiscovery route_request;
+        /* A route reply */
+        RouteDiscovery route_reply;
+        /* A failure in delivering a message (usually used for routing control messages, but might be provided
+     in addition to ack.fail_id to provide details on the type of failure). */
+        Routing_Error error_reason;
+    };
+} Routing;
+
+typedef PB_BYTES_ARRAY_T(237) Data_payload_t;
+/* (Formerly called SubPacket)
+ The payload portion fo a packet, this is the actual bytes that are sent
+ inside a radio packet (because from/to are broken out by the comms library) */
+typedef struct _Data {
+    /* Formerly named typ and of type Type */
+    PortNum portnum;
+    /* TODO: REPLACE */
+    Data_payload_t payload;
+    /* Not normally used, but for testing a sender can request that recipient
+ responds in kind (i.e. if it received a position, it should unicast back it's position).
+ Note: that if you set this on a broadcast you will receive many replies. */
+    bool want_response;
+    /* The address of the destination node.
+ This field is is filled in by the mesh radio device software, application
+ layer software should never need it.
+ RouteDiscovery messages _must_ populate this.
+ Other message types might need to if they are doing multihop routing. */
+    uint32_t dest;
+    /* The address of the original sender for this message.
+ This field should _only_ be populated for reliable multihop packets (to keep
+ packets small). */
+    uint32_t source;
+    /* Only used in routing or response messages.
+ Indicates the original message ID that this message is reporting failure on. (formerly called original_id) */
+    uint32_t request_id;
+    /* If set, this message is intened to be a reply to a previously sent message with the defined id. */
+    uint32_t reply_id;
+    /* Defaults to false. If true, then what is in the payload should be treated as an emoji like giving
+ a message a heart or poop emoji. */
+    uint32_t emoji;
+} Data;
+
 /* Waypoint message, used to share arbitrary locations across the mesh */
-typedef struct _Waypoint { 
+typedef struct _Waypoint {
     /* Id of the waypoint */
     uint32_t id;
     /* latitude_i */
@@ -502,7 +448,7 @@ typedef PB_BYTES_ARRAY_T(256) MeshPacket_encrypted_t;
 /* A packet envelope sent/received over the mesh
  only payload_variant is sent in the payload portion of the LORA packet.
  The other fields are either not sent at all, or sent in the special 16 byte LORA header. */
-typedef struct _MeshPacket { 
+typedef struct _MeshPacket {
     /* The sending node number.
  Note: Our crypto implementation uses this field as well.
  See [crypto](/docs/overview/encryption) for details.
@@ -586,7 +532,7 @@ typedef struct _MeshPacket {
  level etc) SET_CONFIG (switches device to a new set of radio params and
  preshared key, drops all existing nodes, force our node to rejoin this new group)
  Full information about a node on the mesh */
-typedef struct _NodeInfo { 
+typedef struct _NodeInfo {
     /* The node number */
     uint32_t num;
     /* The user info for this node */
@@ -606,25 +552,80 @@ typedef struct _NodeInfo {
     DeviceMetrics device_metrics;
 } NodeInfo;
 
-/* A Routing control Data packet handled by the routing module */
-typedef struct _Routing { 
-    pb_size_t which_variant;
-    union {
-        /* A route request going from the requester */
-        RouteDiscovery route_request;
-        /* A route reply */
-        RouteDiscovery route_reply;
-        /* A failure in delivering a message (usually used for routing control messages, but might be provided
-     in addition to ack.fail_id to provide details on the type of failure). */
-        Routing_Error error_reason;
-    };
-} Routing;
+/* Unique local debugging info for this node
+ Note: we don't include position or the user info, because that will come in the
+ Sent to the phone in response to WantNodes. */
+typedef struct _MyNodeInfo {
+    /* Tells the phone what our node number is, default starting value is
+ lowbyte of macaddr, but it will be fixed if that is already in use */
+    uint32_t my_node_num;
+    /* Note: This flag merely means we detected a hardware GPS in our node.
+ Not the same as UserPreferences.location_sharing */
+    bool has_gps;
+    /* The maximum number of 'software' channels that can be set on this node. */
+    uint32_t max_channels;
+    /* 0.0.5 etc... */
+    char firmware_version[18];
+    /* An error message we'd like to report back to the mothership through analytics.
+ It indicates a serious bug occurred on the device, the device coped with it,
+ but we still want to tell the devs about the bug.
+ This field will be cleared after the phone reads MyNodeInfo
+ (i.e. it will only be reported once)
+ a numeric error code to go with error message, zero means no error */
+    CriticalErrorCode error_code;
+    /* A numeric error address (nonzero if available) */
+    uint32_t error_address;
+    /* The total number of errors this node has ever encountered
+ (well - since the last time we discarded preferences) */
+    uint32_t error_count;
+    /* The total number of reboots this node has ever encountered
+ (well - since the last time we discarded preferences) */
+    uint32_t reboot_count;
+    /* Calculated bitrate of the current channel (in Bytes Per Second) */
+    float bitrate;
+    /* How long before we consider a message abandoned and we can clear our
+ caches of any messages in flight Normally quite large to handle the worst case
+ message delivery time, 5 minutes.
+ Formerly called FLOOD_EXPIRE_TIME in the device code */
+    uint32_t message_timeout_msec;
+    /* The minimum app version that can talk to this device.
+ Phone/PC apps should compare this to their build number and if too low tell the user they must update their app */
+    uint32_t min_app_version;
+    /* 24 time windows of 1hr each with the airtime transmitted out of the device per hour. */
+    pb_size_t air_period_tx_count;
+    uint32_t air_period_tx[8];
+    /* 24 time windows of 1hr each with the airtime of valid packets for your mesh. */
+    pb_size_t air_period_rx_count;
+    uint32_t air_period_rx[8];
+    /* Is the device wifi capable? */
+    bool has_wifi;
+    /* Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise). */
+    float channel_utilization;
+    /* Percent of airtime for transmission used within the last hour. */
+    float air_util_tx;
+} MyNodeInfo;
+
+/* Debug output from the device.
+ To minimize the size of records inside the device code, if a time/source/level is not set
+ on the message it is assumed to be a continuation of the previously sent message.
+ This allows the device code to use fixed maxlen 64 byte strings for messages,
+ and then extend as needed by emitting multiple records. */
+typedef struct _LogRecord {
+    /* Log levels, chosen to match python logging conventions. */
+    char message[64];
+    /* Seconds since 1970 - or 0 for unknown/unset */
+    uint32_t time;
+    /* Usually based on thread name - if known */
+    char source[8];
+    /* Not yet set */
+    LogRecord_Level level;
+} LogRecord;
 
 /* Packets from the radio to the phone will appear on the fromRadio characteristic.
  It will support READ and NOTIFY. When a new packet arrives the device will BLE notify?
  It will sit in that descriptor until consumed by the phone,
  at which point the next item in the FIFO will be populated. */
-typedef struct _FromRadio { 
+typedef struct _FromRadio {
     /* The packet id, used to allow the phone to request missing read packets from the FIFO,
  see our bluetooth docs */
     uint32_t id;
@@ -661,7 +662,7 @@ typedef struct _FromRadio {
 
 /* Packets/commands to the radio will be written (reliably) to the toRadio characteristic.
  Once the write completes the phone can assume it is handled. */
-typedef struct _ToRadio { 
+typedef struct _ToRadio {
     pb_size_t which_payload_variant;
     union {
         /* Send this packet on the mesh */
@@ -682,6 +683,19 @@ typedef struct _ToRadio {
     };
 } ToRadio;
 
+typedef PB_BYTES_ARRAY_T(237) Compressed_data_t;
+/* Compressed message payload */
+typedef struct _Compressed {
+    /* PortNum to determine the how to handle the compressed payload. */
+    PortNum portnum;
+    /* Compressed data. */
+    Compressed_data_t data;
+} Compressed;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 /* Helper constants for enums */
 #define _HardwareModel_MIN HardwareModel_UNSET
@@ -720,10 +734,29 @@ typedef struct _ToRadio {
 #define _LogRecord_Level_MAX LogRecord_Level_CRITICAL
 #define _LogRecord_Level_ARRAYSIZE ((LogRecord_Level)(LogRecord_Level_CRITICAL+1))
 
+#define Position_location_source_ENUMTYPE Position_LocSource
+#define Position_altitude_source_ENUMTYPE Position_AltSource
+
+#define User_hw_model_ENUMTYPE HardwareModel
+
+
+#define Routing_variant_error_reason_ENUMTYPE Routing_Error
+
+#define Data_portnum_ENUMTYPE PortNum
+
+
+#define MeshPacket_priority_ENUMTYPE MeshPacket_Priority
+#define MeshPacket_delayed_ENUMTYPE MeshPacket_Delayed
+
+
+#define MyNodeInfo_error_code_ENUMTYPE CriticalErrorCode
+
+#define LogRecord_level_ENUMTYPE LogRecord_Level
+
+
+
+#define Compressed_portnum_ENUMTYPE PortNum
 
-#ifdef __cplusplus
-extern "C" {
-#endif
 
 /* Initializer values for message structs */
 #define Position_init_default                    {0, 0, 0, 0, _Position_LocSource_MIN, _Position_AltSource_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
@@ -754,36 +787,6 @@ extern "C" {
 #define Compressed_init_zero                     {_PortNum_MIN, {0, {0}}}
 
 /* Field tags (for use in manual encoding/decoding) */
-#define Compressed_portnum_tag                   1
-#define Compressed_data_tag                      2
-#define Data_portnum_tag                         1
-#define Data_payload_tag                         2
-#define Data_want_response_tag                   3
-#define Data_dest_tag                            4
-#define Data_source_tag                          5
-#define Data_request_id_tag                      6
-#define Data_reply_id_tag                        7
-#define Data_emoji_tag                           8
-#define LogRecord_message_tag                    1
-#define LogRecord_time_tag                       2
-#define LogRecord_source_tag                     3
-#define LogRecord_level_tag                      4
-#define MyNodeInfo_my_node_num_tag               1
-#define MyNodeInfo_has_gps_tag                   2
-#define MyNodeInfo_max_channels_tag              3
-#define MyNodeInfo_firmware_version_tag          4
-#define MyNodeInfo_error_code_tag                5
-#define MyNodeInfo_error_address_tag             6
-#define MyNodeInfo_error_count_tag               7
-#define MyNodeInfo_reboot_count_tag              8
-#define MyNodeInfo_bitrate_tag                   9
-#define MyNodeInfo_message_timeout_msec_tag      10
-#define MyNodeInfo_min_app_version_tag           11
-#define MyNodeInfo_air_period_tx_tag             12
-#define MyNodeInfo_air_period_rx_tag             13
-#define MyNodeInfo_has_wifi_tag                  14
-#define MyNodeInfo_channel_utilization_tag       15
-#define MyNodeInfo_air_util_tx_tag               16
 #define Position_latitude_i_tag                  1
 #define Position_longitude_i_tag                 2
 #define Position_altitude_tag                    3
@@ -806,13 +809,24 @@ extern "C" {
 #define Position_sensor_id_tag                   20
 #define Position_next_update_tag                 21
 #define Position_seq_number_tag                  22
-#define RouteDiscovery_route_tag                 1
 #define User_id_tag                              1
 #define User_long_name_tag                       2
 #define User_short_name_tag                      3
 #define User_macaddr_tag                         4
 #define User_hw_model_tag                        5
 #define User_is_licensed_tag                     6
+#define RouteDiscovery_route_tag                 1
+#define Routing_route_request_tag                1
+#define Routing_route_reply_tag                  2
+#define Routing_error_reason_tag                 3
+#define Data_portnum_tag                         1
+#define Data_payload_tag                         2
+#define Data_want_response_tag                   3
+#define Data_dest_tag                            4
+#define Data_source_tag                          5
+#define Data_request_id_tag                      6
+#define Data_reply_id_tag                        7
+#define Data_emoji_tag                           8
 #define Waypoint_id_tag                          1
 #define Waypoint_latitude_i_tag                  2
 #define Waypoint_longitude_i_tag                 3
@@ -839,9 +853,26 @@ extern "C" {
 #define NodeInfo_snr_tag                         4
 #define NodeInfo_last_heard_tag                  5
 #define NodeInfo_device_metrics_tag              6
-#define Routing_route_request_tag                1
-#define Routing_route_reply_tag                  2
-#define Routing_error_reason_tag                 3
+#define MyNodeInfo_my_node_num_tag               1
+#define MyNodeInfo_has_gps_tag                   2
+#define MyNodeInfo_max_channels_tag              3
+#define MyNodeInfo_firmware_version_tag          4
+#define MyNodeInfo_error_code_tag                5
+#define MyNodeInfo_error_address_tag             6
+#define MyNodeInfo_error_count_tag               7
+#define MyNodeInfo_reboot_count_tag              8
+#define MyNodeInfo_bitrate_tag                   9
+#define MyNodeInfo_message_timeout_msec_tag      10
+#define MyNodeInfo_min_app_version_tag           11
+#define MyNodeInfo_air_period_tx_tag             12
+#define MyNodeInfo_air_period_rx_tag             13
+#define MyNodeInfo_has_wifi_tag                  14
+#define MyNodeInfo_channel_utilization_tag       15
+#define MyNodeInfo_air_util_tx_tag               16
+#define LogRecord_message_tag                    1
+#define LogRecord_time_tag                       2
+#define LogRecord_source_tag                     3
+#define LogRecord_level_tag                      4
 #define FromRadio_id_tag                         1
 #define FromRadio_packet_tag                     2
 #define FromRadio_my_info_tag                    3
@@ -855,6 +886,8 @@ extern "C" {
 #define ToRadio_packet_tag                       1
 #define ToRadio_want_config_id_tag               3
 #define ToRadio_disconnect_tag                   4
+#define Compressed_portnum_tag                   1
+#define Compressed_data_tag                      2
 
 /* Struct field encoding specification for nanopb */
 #define Position_FIELDLIST(X, a) \

src/mesh/generated/module_config.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "module_config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/module_config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_MODULE_CONFIG_PB_H_INCLUDED
 #define PB_MODULE_CONFIG_PB_H_INCLUDED
@@ -10,132 +10,244 @@
 #endif
 
 /* Enum definitions */
-typedef enum _ModuleConfig_AudioConfig_Audio_Baud { 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_DEFAULT = 0, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_3200 = 1, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_2400 = 2, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1600 = 3, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1400 = 4, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1300 = 5, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1200 = 6, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_700 = 7, 
-    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_700B = 8 
+/* Baudrate for codec2 voice */
+typedef enum _ModuleConfig_AudioConfig_Audio_Baud {
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_DEFAULT = 0,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_3200 = 1,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_2400 = 2,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1600 = 3,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1400 = 4,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1300 = 5,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_1200 = 6,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_700 = 7,
+    ModuleConfig_AudioConfig_Audio_Baud_CODEC2_700B = 8
 } ModuleConfig_AudioConfig_Audio_Baud;
 
-typedef enum _ModuleConfig_SerialConfig_Serial_Baud { 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_DEFAULT = 0, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_110 = 1, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_300 = 2, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_600 = 3, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_1200 = 4, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_2400 = 5, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_4800 = 6, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_9600 = 7, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_19200 = 8, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_38400 = 9, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_57600 = 10, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_115200 = 11, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_230400 = 12, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_460800 = 13, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_576000 = 14, 
-    ModuleConfig_SerialConfig_Serial_Baud_BAUD_921600 = 15 
+/* TODO: REPLACE */
+typedef enum _ModuleConfig_SerialConfig_Serial_Baud {
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_DEFAULT = 0,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_110 = 1,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_300 = 2,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_600 = 3,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_1200 = 4,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_2400 = 5,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_4800 = 6,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_9600 = 7,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_19200 = 8,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_38400 = 9,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_57600 = 10,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_115200 = 11,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_230400 = 12,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_460800 = 13,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_576000 = 14,
+    ModuleConfig_SerialConfig_Serial_Baud_BAUD_921600 = 15
 } ModuleConfig_SerialConfig_Serial_Baud;
 
-typedef enum _ModuleConfig_SerialConfig_Serial_Mode { 
-    ModuleConfig_SerialConfig_Serial_Mode_DEFAULT = 0, 
-    ModuleConfig_SerialConfig_Serial_Mode_SIMPLE = 1, 
-    ModuleConfig_SerialConfig_Serial_Mode_PROTO = 2, 
-    ModuleConfig_SerialConfig_Serial_Mode_TEXTMSG = 3, 
-    ModuleConfig_SerialConfig_Serial_Mode_NMEA = 4 
+/* TODO: REPLACE */
+typedef enum _ModuleConfig_SerialConfig_Serial_Mode {
+    ModuleConfig_SerialConfig_Serial_Mode_DEFAULT = 0,
+    ModuleConfig_SerialConfig_Serial_Mode_SIMPLE = 1,
+    ModuleConfig_SerialConfig_Serial_Mode_PROTO = 2,
+    ModuleConfig_SerialConfig_Serial_Mode_TEXTMSG = 3,
+    ModuleConfig_SerialConfig_Serial_Mode_NMEA = 4
 } ModuleConfig_SerialConfig_Serial_Mode;
 
-typedef enum _ModuleConfig_CannedMessageConfig_InputEventChar { 
-    ModuleConfig_CannedMessageConfig_InputEventChar_NONE = 0, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_UP = 17, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_DOWN = 18, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_LEFT = 19, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT = 20, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_SELECT = 10, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_BACK = 27, 
-    ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL = 24 
+/* TODO: REPLACE */
+typedef enum _ModuleConfig_CannedMessageConfig_InputEventChar {
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_NONE = 0,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_UP = 17,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_DOWN = 18,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_LEFT = 19,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT = 20,
+    /* '\n' */
+    ModuleConfig_CannedMessageConfig_InputEventChar_SELECT = 10,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_BACK = 27,
+    /* TODO: REPLACE */
+    ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL = 24
 } ModuleConfig_CannedMessageConfig_InputEventChar;
 
 /* Struct definitions */
-typedef struct _ModuleConfig_AudioConfig { 
-    bool codec2_enabled;
-    uint32_t mic_chan;
-    uint32_t amp_pin;
-    uint32_t ptt_pin;
-    ModuleConfig_AudioConfig_Audio_Baud bitrate;
-} ModuleConfig_AudioConfig;
-
-typedef struct _ModuleConfig_CannedMessageConfig { 
-    bool rotary1_enabled;
-    uint32_t inputbroker_pin_a;
-    uint32_t inputbroker_pin_b;
-    uint32_t inputbroker_pin_press;
-    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_cw;
-    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_ccw;
-    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_press;
-    bool updown1_enabled;
-    bool enabled;
-    char allow_input_source[16];
-    bool send_bell;
-} ModuleConfig_CannedMessageConfig;
-
-typedef struct _ModuleConfig_ExternalNotificationConfig { 
-    bool enabled;
-    uint32_t output_ms;
-    uint32_t output;
-    bool active;
-    bool alert_message;
-    bool alert_bell;
-    bool use_pwm;
-} ModuleConfig_ExternalNotificationConfig;
-
-typedef struct _ModuleConfig_MQTTConfig { 
+/* MQTT Client Config */
+typedef struct _ModuleConfig_MQTTConfig {
+    /* If a meshtastic node is able to reach the internet it will normally attempt to gateway any channels that are marked as
+ is_uplink_enabled or is_downlink_enabled. */
     bool enabled;
+    /* The server to use for our MQTT global message gateway feature.
+ If not set, the default server will be used */
     char address[32];
+    /* MQTT username to use (most useful for a custom MQTT server).
+ If using a custom server, this will be honoured even if empty.
+ If using the default server, this will only be honoured if set, otherwise the device will use the default username */
     char username[64];
+    /* MQTT password to use (most useful for a custom MQTT server).
+ If using a custom server, this will be honoured even if empty.
+ If using the default server, this will only be honoured if set, otherwise the device will use the default password */
     char password[64];
+    /* Whether to send encrypted or decrypted packets to MQTT.
+ This parameter is only honoured if you also set server
+ (the default official mqtt.meshtastic.org server can handle encrypted packets)
+ Decrypted packets may be useful for external systems that want to consume meshtastic packets */
     bool encryption_enabled;
+    /* Whether to send / consume json packets on MQTT */
     bool json_enabled;
 } ModuleConfig_MQTTConfig;
 
-typedef struct _ModuleConfig_RangeTestConfig { 
-    bool enabled;
-    uint32_t sender;
-    bool save;
-} ModuleConfig_RangeTestConfig;
+/* Audio Config for codec2 voice */
+typedef struct _ModuleConfig_AudioConfig {
+    /* Whether Audio is enabled */
+    bool codec2_enabled;
+    /* PTT Pin */
+    uint8_t ptt_pin;
+    /* The audio sample rate to use for codec2 */
+    ModuleConfig_AudioConfig_Audio_Baud bitrate;
+    /* I2S Word Select */
+    uint8_t i2s_ws;
+    /* I2S Data IN */
+    uint8_t i2s_sd;
+    /* I2S Data OUT */
+    uint8_t i2s_din;
+    /* I2S Clock */
+    uint8_t i2s_sck;
+} ModuleConfig_AudioConfig;
 
-typedef struct _ModuleConfig_SerialConfig { 
+/* Serial Config */
+typedef struct _ModuleConfig_SerialConfig {
+    /* Preferences for the SerialModule
+ FIXME - Move this out of UserPreferences and into a section for module configuration. */
     bool enabled;
+    /* TODO: REPLACE */
     bool echo;
+    /* TODO: REPLACE */
     uint32_t rxd;
+    /* TODO: REPLACE */
     uint32_t txd;
+    /* TODO: REPLACE */
     ModuleConfig_SerialConfig_Serial_Baud baud;
+    /* TODO: REPLACE */
     uint32_t timeout;
+    /* TODO: REPLACE */
     ModuleConfig_SerialConfig_Serial_Mode mode;
 } ModuleConfig_SerialConfig;
 
-typedef struct _ModuleConfig_StoreForwardConfig { 
+/* External Notifications Config */
+typedef struct _ModuleConfig_ExternalNotificationConfig {
+    /* Enable the ExternalNotificationModule */
     bool enabled;
+    /* When using in On/Off mode, keep the output on for this many
+ milliseconds. Default 1000ms (1 second). */
+    uint32_t output_ms;
+    /* Define the output pin GPIO setting Defaults to
+ EXT_NOTIFY_OUT if set for the board.
+ In standalone devices this pin should drive the LED to match the UI. */
+    uint32_t output;
+    /* IF this is true, the 'output' Pin will be pulled active high, false
+ means active low. */
+    bool active;
+    /* True: Alert when a text message arrives (output) */
+    bool alert_message;
+    /* True: Alert when the bell character is received (output) */
+    bool alert_bell;
+    /* use a PWM output instead of a simple on/off output. This will ignore
+ the 'output', 'output_ms' and 'active' settings and use the
+ device.buzzer_gpio instead. */
+    bool use_pwm;
+    /* Optional: Define a secondary output pin for a vibra motor
+ This is used in standalone devices to match the UI. */
+    uint8_t output_vibra;
+    /* Optional: Define a tertiary output pin for an active buzzer
+ This is used in standalone devices to to match the UI. */
+    uint8_t output_buzzer;
+    /* True: Alert when a text message arrives (output_vibra) */
+    bool alert_message_vibra;
+    /* True: Alert when a text message arrives (output_buzzer) */
+    bool alert_message_buzzer;
+    /* True: Alert when the bell character is received (output_vibra) */
+    bool alert_bell_vibra;
+    /* True: Alert when the bell character is received (output_buzzer) */
+    bool alert_bell_buzzer;
+    /* The notification will toggle with 'output_ms' for this time of seconds.
+ Default is 0 which means don't repeat at all. 60 would mean blink
+ and/or beep for 60 seconds */
+    uint16_t nag_timeout;
+} ModuleConfig_ExternalNotificationConfig;
+
+/* Store and Forward Module Config */
+typedef struct _ModuleConfig_StoreForwardConfig {
+    /* Enable the Store and Forward Module */
+    bool enabled;
+    /* TODO: REPLACE */
     bool heartbeat;
+    /* TODO: REPLACE */
     uint32_t records;
+    /* TODO: REPLACE */
     uint32_t history_return_max;
+    /* TODO: REPLACE */
     uint32_t history_return_window;
 } ModuleConfig_StoreForwardConfig;
 
-typedef struct _ModuleConfig_TelemetryConfig { 
+/* Preferences for the RangeTestModule */
+typedef struct _ModuleConfig_RangeTestConfig {
+    /* Enable the Range Test Module */
+    bool enabled;
+    /* Send out range test messages from this node */
+    uint32_t sender;
+    /* Bool value indicating that this node should save a RangeTest.csv file. 
+ ESP32 Only */
+    bool save;
+} ModuleConfig_RangeTestConfig;
+
+/* Configuration for both device and environment metrics */
+typedef struct _ModuleConfig_TelemetryConfig {
+    /* Interval in seconds of how often we should try to send our
+ device metrics to the mesh */
     uint32_t device_update_interval;
     uint32_t environment_update_interval;
+    /* Preferences for the Telemetry Module (Environment)
+ Enable/Disable the telemetry measurement module measurement collection */
     bool environment_measurement_enabled;
+    /* Enable/Disable the telemetry measurement module on-device display */
     bool environment_screen_enabled;
+    /* We'll always read the sensor in Celsius, but sometimes we might want to
+ display the results in Fahrenheit as a "user preference". */
     bool environment_display_fahrenheit;
 } ModuleConfig_TelemetryConfig;
 
+/* TODO: REPLACE */
+typedef struct _ModuleConfig_CannedMessageConfig {
+    /* Enable the rotary encoder #1. This is a 'dumb' encoder sending pulses on both A and B pins while rotating. */
+    bool rotary1_enabled;
+    /* GPIO pin for rotary encoder A port. */
+    uint32_t inputbroker_pin_a;
+    /* GPIO pin for rotary encoder B port. */
+    uint32_t inputbroker_pin_b;
+    /* GPIO pin for rotary encoder Press port. */
+    uint32_t inputbroker_pin_press;
+    /* Generate input event on CW of this kind. */
+    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_cw;
+    /* Generate input event on CCW of this kind. */
+    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_ccw;
+    /* Generate input event on Press of this kind. */
+    ModuleConfig_CannedMessageConfig_InputEventChar inputbroker_event_press;
+    /* Enable the Up/Down/Select input device. Can be RAK rotary encoder or 3 buttons. Uses the a/b/press definitions from inputbroker. */
+    bool updown1_enabled;
+    /* Enable/disable CannedMessageModule. */
+    bool enabled;
+    /* Input event origin accepted by the canned message module.
+ Can be e.g. "rotEnc1", "upDownEnc1" or keyword "_any" */
+    char allow_input_source[16];
+    /* CannedMessageModule also sends a bell character with the messages.
+ ExternalNotificationModule can benefit from this feature. */
+    bool send_bell;
+} ModuleConfig_CannedMessageConfig;
+
 /* Module Config */
-typedef struct _ModuleConfig { 
+typedef struct _ModuleConfig {
     pb_size_t which_payload_variant;
     union {
         /* TODO: REPLACE */
@@ -158,6 +270,10 @@ typedef struct _ModuleConfig {
 } ModuleConfig;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _ModuleConfig_AudioConfig_Audio_Baud_MIN ModuleConfig_AudioConfig_Audio_Baud_CODEC2_DEFAULT
 #define _ModuleConfig_AudioConfig_Audio_Baud_MAX ModuleConfig_AudioConfig_Audio_Baud_CODEC2_700B
@@ -176,36 +292,89 @@ typedef struct _ModuleConfig {
 #define _ModuleConfig_CannedMessageConfig_InputEventChar_ARRAYSIZE ((ModuleConfig_CannedMessageConfig_InputEventChar)(ModuleConfig_CannedMessageConfig_InputEventChar_BACK+1))
 
 
-#ifdef __cplusplus
-extern "C" {
-#endif
+
+#define ModuleConfig_AudioConfig_bitrate_ENUMTYPE ModuleConfig_AudioConfig_Audio_Baud
+
+#define ModuleConfig_SerialConfig_baud_ENUMTYPE ModuleConfig_SerialConfig_Serial_Baud
+#define ModuleConfig_SerialConfig_mode_ENUMTYPE ModuleConfig_SerialConfig_Serial_Mode
+
+
+
+
+
+#define ModuleConfig_CannedMessageConfig_inputbroker_event_cw_ENUMTYPE ModuleConfig_CannedMessageConfig_InputEventChar
+#define ModuleConfig_CannedMessageConfig_inputbroker_event_ccw_ENUMTYPE ModuleConfig_CannedMessageConfig_InputEventChar
+#define ModuleConfig_CannedMessageConfig_inputbroker_event_press_ENUMTYPE ModuleConfig_CannedMessageConfig_InputEventChar
+
 
 /* Initializer values for message structs */
 #define ModuleConfig_init_default                {0, {ModuleConfig_MQTTConfig_init_default}}
 #define ModuleConfig_MQTTConfig_init_default     {0, "", "", "", 0, 0}
-#define ModuleConfig_AudioConfig_init_default    {0, 0, 0, 0, _ModuleConfig_AudioConfig_Audio_Baud_MIN}
+#define ModuleConfig_AudioConfig_init_default    {0, 0, _ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0}
 #define ModuleConfig_SerialConfig_init_default   {0, 0, 0, 0, _ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _ModuleConfig_SerialConfig_Serial_Mode_MIN}
-#define ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0, 0}
+#define ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define ModuleConfig_StoreForwardConfig_init_default {0, 0, 0, 0, 0}
 #define ModuleConfig_RangeTestConfig_init_default {0, 0, 0}
 #define ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0}
 #define ModuleConfig_CannedMessageConfig_init_default {0, 0, 0, 0, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define ModuleConfig_init_zero                   {0, {ModuleConfig_MQTTConfig_init_zero}}
 #define ModuleConfig_MQTTConfig_init_zero        {0, "", "", "", 0, 0}
-#define ModuleConfig_AudioConfig_init_zero       {0, 0, 0, 0, _ModuleConfig_AudioConfig_Audio_Baud_MIN}
+#define ModuleConfig_AudioConfig_init_zero       {0, 0, _ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0}
 #define ModuleConfig_SerialConfig_init_zero      {0, 0, 0, 0, _ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _ModuleConfig_SerialConfig_Serial_Mode_MIN}
-#define ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0, 0}
+#define ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define ModuleConfig_StoreForwardConfig_init_zero {0, 0, 0, 0, 0}
 #define ModuleConfig_RangeTestConfig_init_zero   {0, 0, 0}
 #define ModuleConfig_TelemetryConfig_init_zero   {0, 0, 0, 0, 0}
 #define ModuleConfig_CannedMessageConfig_init_zero {0, 0, 0, 0, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 
 /* Field tags (for use in manual encoding/decoding) */
+#define ModuleConfig_MQTTConfig_enabled_tag      1
+#define ModuleConfig_MQTTConfig_address_tag      2
+#define ModuleConfig_MQTTConfig_username_tag     3
+#define ModuleConfig_MQTTConfig_password_tag     4
+#define ModuleConfig_MQTTConfig_encryption_enabled_tag 5
+#define ModuleConfig_MQTTConfig_json_enabled_tag 6
 #define ModuleConfig_AudioConfig_codec2_enabled_tag 1
-#define ModuleConfig_AudioConfig_mic_chan_tag    2
-#define ModuleConfig_AudioConfig_amp_pin_tag     3
-#define ModuleConfig_AudioConfig_ptt_pin_tag     4
-#define ModuleConfig_AudioConfig_bitrate_tag     5
+#define ModuleConfig_AudioConfig_ptt_pin_tag     2
+#define ModuleConfig_AudioConfig_bitrate_tag     3
+#define ModuleConfig_AudioConfig_i2s_ws_tag      4
+#define ModuleConfig_AudioConfig_i2s_sd_tag      5
+#define ModuleConfig_AudioConfig_i2s_din_tag     6
+#define ModuleConfig_AudioConfig_i2s_sck_tag     7
+#define ModuleConfig_SerialConfig_enabled_tag    1
+#define ModuleConfig_SerialConfig_echo_tag       2
+#define ModuleConfig_SerialConfig_rxd_tag        3
+#define ModuleConfig_SerialConfig_txd_tag        4
+#define ModuleConfig_SerialConfig_baud_tag       5
+#define ModuleConfig_SerialConfig_timeout_tag    6
+#define ModuleConfig_SerialConfig_mode_tag       7
+#define ModuleConfig_ExternalNotificationConfig_enabled_tag 1
+#define ModuleConfig_ExternalNotificationConfig_output_ms_tag 2
+#define ModuleConfig_ExternalNotificationConfig_output_tag 3
+#define ModuleConfig_ExternalNotificationConfig_active_tag 4
+#define ModuleConfig_ExternalNotificationConfig_alert_message_tag 5
+#define ModuleConfig_ExternalNotificationConfig_alert_bell_tag 6
+#define ModuleConfig_ExternalNotificationConfig_use_pwm_tag 7
+#define ModuleConfig_ExternalNotificationConfig_output_vibra_tag 8
+#define ModuleConfig_ExternalNotificationConfig_output_buzzer_tag 9
+#define ModuleConfig_ExternalNotificationConfig_alert_message_vibra_tag 10
+#define ModuleConfig_ExternalNotificationConfig_alert_message_buzzer_tag 11
+#define ModuleConfig_ExternalNotificationConfig_alert_bell_vibra_tag 12
+#define ModuleConfig_ExternalNotificationConfig_alert_bell_buzzer_tag 13
+#define ModuleConfig_ExternalNotificationConfig_nag_timeout_tag 14
+#define ModuleConfig_StoreForwardConfig_enabled_tag 1
+#define ModuleConfig_StoreForwardConfig_heartbeat_tag 2
+#define ModuleConfig_StoreForwardConfig_records_tag 3
+#define ModuleConfig_StoreForwardConfig_history_return_max_tag 4
+#define ModuleConfig_StoreForwardConfig_history_return_window_tag 5
+#define ModuleConfig_RangeTestConfig_enabled_tag 1
+#define ModuleConfig_RangeTestConfig_sender_tag  2
+#define ModuleConfig_RangeTestConfig_save_tag    3
+#define ModuleConfig_TelemetryConfig_device_update_interval_tag 1
+#define ModuleConfig_TelemetryConfig_environment_update_interval_tag 2
+#define ModuleConfig_TelemetryConfig_environment_measurement_enabled_tag 3
+#define ModuleConfig_TelemetryConfig_environment_screen_enabled_tag 4
+#define ModuleConfig_TelemetryConfig_environment_display_fahrenheit_tag 5
 #define ModuleConfig_CannedMessageConfig_rotary1_enabled_tag 1
 #define ModuleConfig_CannedMessageConfig_inputbroker_pin_a_tag 2
 #define ModuleConfig_CannedMessageConfig_inputbroker_pin_b_tag 3
@@ -217,39 +386,6 @@ extern "C" {
 #define ModuleConfig_CannedMessageConfig_enabled_tag 9
 #define ModuleConfig_CannedMessageConfig_allow_input_source_tag 10
 #define ModuleConfig_CannedMessageConfig_send_bell_tag 11
-#define ModuleConfig_ExternalNotificationConfig_enabled_tag 1
-#define ModuleConfig_ExternalNotificationConfig_output_ms_tag 2
-#define ModuleConfig_ExternalNotificationConfig_output_tag 3
-#define ModuleConfig_ExternalNotificationConfig_active_tag 4
-#define ModuleConfig_ExternalNotificationConfig_alert_message_tag 5
-#define ModuleConfig_ExternalNotificationConfig_alert_bell_tag 6
-#define ModuleConfig_ExternalNotificationConfig_use_pwm_tag 7
-#define ModuleConfig_MQTTConfig_enabled_tag      1
-#define ModuleConfig_MQTTConfig_address_tag      2
-#define ModuleConfig_MQTTConfig_username_tag     3
-#define ModuleConfig_MQTTConfig_password_tag     4
-#define ModuleConfig_MQTTConfig_encryption_enabled_tag 5
-#define ModuleConfig_MQTTConfig_json_enabled_tag 6
-#define ModuleConfig_RangeTestConfig_enabled_tag 1
-#define ModuleConfig_RangeTestConfig_sender_tag  2
-#define ModuleConfig_RangeTestConfig_save_tag    3
-#define ModuleConfig_SerialConfig_enabled_tag    1
-#define ModuleConfig_SerialConfig_echo_tag       2
-#define ModuleConfig_SerialConfig_rxd_tag        3
-#define ModuleConfig_SerialConfig_txd_tag        4
-#define ModuleConfig_SerialConfig_baud_tag       5
-#define ModuleConfig_SerialConfig_timeout_tag    6
-#define ModuleConfig_SerialConfig_mode_tag       7
-#define ModuleConfig_StoreForwardConfig_enabled_tag 1
-#define ModuleConfig_StoreForwardConfig_heartbeat_tag 2
-#define ModuleConfig_StoreForwardConfig_records_tag 3
-#define ModuleConfig_StoreForwardConfig_history_return_max_tag 4
-#define ModuleConfig_StoreForwardConfig_history_return_window_tag 5
-#define ModuleConfig_TelemetryConfig_device_update_interval_tag 1
-#define ModuleConfig_TelemetryConfig_environment_update_interval_tag 2
-#define ModuleConfig_TelemetryConfig_environment_measurement_enabled_tag 3
-#define ModuleConfig_TelemetryConfig_environment_screen_enabled_tag 4
-#define ModuleConfig_TelemetryConfig_environment_display_fahrenheit_tag 5
 #define ModuleConfig_mqtt_tag                    1
 #define ModuleConfig_serial_tag                  2
 #define ModuleConfig_external_notification_tag   3
@@ -292,10 +428,12 @@ X(a, STATIC,   SINGULAR, BOOL,     json_enabled,      6)
 
 #define ModuleConfig_AudioConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BOOL,     codec2_enabled,    1) \
-X(a, STATIC,   SINGULAR, UINT32,   mic_chan,          2) \
-X(a, STATIC,   SINGULAR, UINT32,   amp_pin,           3) \
-X(a, STATIC,   SINGULAR, UINT32,   ptt_pin,           4) \
-X(a, STATIC,   SINGULAR, UENUM,    bitrate,           5)
+X(a, STATIC,   SINGULAR, UINT32,   ptt_pin,           2) \
+X(a, STATIC,   SINGULAR, UENUM,    bitrate,           3) \
+X(a, STATIC,   SINGULAR, UINT32,   i2s_ws,            4) \
+X(a, STATIC,   SINGULAR, UINT32,   i2s_sd,            5) \
+X(a, STATIC,   SINGULAR, UINT32,   i2s_din,           6) \
+X(a, STATIC,   SINGULAR, UINT32,   i2s_sck,           7)
 #define ModuleConfig_AudioConfig_CALLBACK NULL
 #define ModuleConfig_AudioConfig_DEFAULT NULL
 
@@ -317,7 +455,14 @@ X(a, STATIC,   SINGULAR, UINT32,   output,            3) \
 X(a, STATIC,   SINGULAR, BOOL,     active,            4) \
 X(a, STATIC,   SINGULAR, BOOL,     alert_message,     5) \
 X(a, STATIC,   SINGULAR, BOOL,     alert_bell,        6) \
-X(a, STATIC,   SINGULAR, BOOL,     use_pwm,           7)
+X(a, STATIC,   SINGULAR, BOOL,     use_pwm,           7) \
+X(a, STATIC,   SINGULAR, UINT32,   output_vibra,      8) \
+X(a, STATIC,   SINGULAR, UINT32,   output_buzzer,     9) \
+X(a, STATIC,   SINGULAR, BOOL,     alert_message_vibra,  10) \
+X(a, STATIC,   SINGULAR, BOOL,     alert_message_buzzer,  11) \
+X(a, STATIC,   SINGULAR, BOOL,     alert_bell_vibra,  12) \
+X(a, STATIC,   SINGULAR, BOOL,     alert_bell_buzzer,  13) \
+X(a, STATIC,   SINGULAR, UINT32,   nag_timeout,      14)
 #define ModuleConfig_ExternalNotificationConfig_CALLBACK NULL
 #define ModuleConfig_ExternalNotificationConfig_DEFAULT NULL
 
@@ -383,9 +528,9 @@ extern const pb_msgdesc_t ModuleConfig_CannedMessageConfig_msg;
 #define ModuleConfig_CannedMessageConfig_fields &ModuleConfig_CannedMessageConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define ModuleConfig_AudioConfig_size            22
+#define ModuleConfig_AudioConfig_size            19
 #define ModuleConfig_CannedMessageConfig_size    49
-#define ModuleConfig_ExternalNotificationConfig_size 22
+#define ModuleConfig_ExternalNotificationConfig_size 40
 #define ModuleConfig_MQTTConfig_size             169
 #define ModuleConfig_RangeTestConfig_size        10
 #define ModuleConfig_SerialConfig_size           26

src/mesh/generated/mqtt.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "mqtt.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/mqtt.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_MQTT_PB_H_INCLUDED
 #define PB_MQTT_PB_H_INCLUDED
@@ -12,7 +12,7 @@
 
 /* Struct definitions */
 /* This message wraps a MeshPacket with extra metadata about the sender and how it arrived. */
-typedef struct _ServiceEnvelope { 
+typedef struct _ServiceEnvelope {
     /* The (probably encrypted) packet */
     struct _MeshPacket *packet;
     /* The global channel ID it was sent on */

src/mesh/generated/portnums.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "portnums.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/portnums.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_PORTNUMS_PB_H_INCLUDED
 #define PB_PORTNUMS_PB_H_INCLUDED
@@ -22,86 +22,89 @@
  Note: This was formerly a Type enum named 'typ' with the same id #
  We have change to this 'portnum' based scheme for specifying app handlers for particular payloads.
  This change is backwards compatible by treating the legacy OPAQUE/CLEAR_TEXT values identically. */
-typedef enum _PortNum { 
+typedef enum _PortNum {
     /* Deprecated: do not use in new code (formerly called OPAQUE)
  A message sent from a device outside of the mesh, in a form the mesh does not understand
  NOTE: This must be 0, because it is documented in IMeshService.aidl to be so */
-    PortNum_UNKNOWN_APP = 0, 
+    PortNum_UNKNOWN_APP = 0,
     /* A simple UTF-8 text message, which even the little micros in the mesh
  can understand and show on their screen eventually in some circumstances
  even signal might send messages in this form (see below) */
-    PortNum_TEXT_MESSAGE_APP = 1, 
+    PortNum_TEXT_MESSAGE_APP = 1,
     /* Reserved for built-in GPIO/example app.
  See remote_hardware.proto/HardwareMessage for details on the message sent/received to this port number */
-    PortNum_REMOTE_HARDWARE_APP = 2, 
+    PortNum_REMOTE_HARDWARE_APP = 2,
     /* The built-in position messaging app.
  Payload is a [Position](/docs/developers/protobufs/api#position) message */
-    PortNum_POSITION_APP = 3, 
+    PortNum_POSITION_APP = 3,
     /* The built-in user info app.
  Payload is a [User](/docs/developers/protobufs/api#user) message */
-    PortNum_NODEINFO_APP = 4, 
+    PortNum_NODEINFO_APP = 4,
     /* Protocol control packets for mesh protocol use.
  Payload is a [Routing](/docs/developers/protobufs/api#routing) message */
-    PortNum_ROUTING_APP = 5, 
+    PortNum_ROUTING_APP = 5,
     /* Admin control packets.
  Payload is a [AdminMessage](/docs/developers/protobufs/api#adminmessage) message */
-    PortNum_ADMIN_APP = 6, 
+    PortNum_ADMIN_APP = 6,
     /* Compressed TEXT_MESSAGE payloads. */
-    PortNum_TEXT_MESSAGE_COMPRESSED_APP = 7, 
+    PortNum_TEXT_MESSAGE_COMPRESSED_APP = 7,
     /* Waypoint payloads.
  Payload is a [Waypoint](/docs/developers/protobufs/api#waypoint) message */
-    PortNum_WAYPOINT_APP = 8, 
+    PortNum_WAYPOINT_APP = 8,
     /* Audio Payloads.
  Encapsulated codec2 packets. On 2.4 GHZ Bandwidths only for now */
-    PortNum_AUDIO_APP = 9, 
+    PortNum_AUDIO_APP = 9,
     /* Provides a 'ping' service that replies to any packet it receives.
  Also serves as a small example module. */
-    PortNum_REPLY_APP = 32, 
+    PortNum_REPLY_APP = 32,
     /* Used for the python IP tunnel feature */
-    PortNum_IP_TUNNEL_APP = 33, 
+    PortNum_IP_TUNNEL_APP = 33,
     /* Provides a hardware serial interface to send and receive from the Meshtastic network.
  Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic
  network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network.
  Maximum packet size of 240 bytes.
  Module is disabled by default can be turned on by setting SERIAL_MODULE_ENABLED = 1 in SerialPlugh.cpp. */
-    PortNum_SERIAL_APP = 64, 
+    PortNum_SERIAL_APP = 64,
     /* STORE_FORWARD_APP (Work in Progress)
  Maintained by Jm Casler (MC Hamster) : jm@casler.org */
-    PortNum_STORE_FORWARD_APP = 65, 
+    PortNum_STORE_FORWARD_APP = 65,
     /* Optional port for messages for the range test module. */
-    PortNum_RANGE_TEST_APP = 66, 
+    PortNum_RANGE_TEST_APP = 66,
     /* Provides a format to send and receive telemetry data from the Meshtastic network.
  Maintained by Charles Crossan (crossan007) : crossan007@gmail.com */
-    PortNum_TELEMETRY_APP = 67, 
+    PortNum_TELEMETRY_APP = 67,
     /* Experimental tools for estimating node position without a GPS
  Maintained by Github user a-f-G-U-C (a Meshtastic contributor)
  Project files at https://github.com/a-f-G-U-C/Meshtastic-ZPS */
-    PortNum_ZPS_APP = 68, 
+    PortNum_ZPS_APP = 68,
     /* Used to let multiple instances of Linux native applications communicate 
  as if they did using their LoRa chip.
  Maintained by GitHub user GUVWAF. 
  Project files at https://github.com/GUVWAF/Meshtasticator */
-    PortNum_SIMULATOR_APP = 69, 
+    PortNum_SIMULATOR_APP = 69,
+    /* Provides a traceroute functionality to show the route a packet towards
+ a certain destination would take on the mesh. */
+    PortNum_TRACEROUTE_APP = 70,
     /* Private applications should use portnums >= 256.
  To simplify initial development and testing you can use "PRIVATE_APP"
  in your code without needing to rebuild protobuf files (via [regen-protos.sh](https://github.com/meshtastic/firmware/blob/master/bin/regen-protos.sh)) */
-    PortNum_PRIVATE_APP = 256, 
+    PortNum_PRIVATE_APP = 256,
     /* ATAK Forwarder Module https://github.com/paulmandal/atak-forwarder */
-    PortNum_ATAK_FORWARDER = 257, 
+    PortNum_ATAK_FORWARDER = 257,
     /* Currently we limit port nums to no higher than this value */
-    PortNum_MAX = 511 
+    PortNum_MAX = 511
 } PortNum;
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _PortNum_MIN PortNum_UNKNOWN_APP
 #define _PortNum_MAX PortNum_MAX
 #define _PortNum_ARRAYSIZE ((PortNum)(PortNum_MAX+1))
 
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 #ifdef __cplusplus
 } /* extern "C" */
 #endif

src/mesh/generated/remote_hardware.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "remote_hardware.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/remote_hardware.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_REMOTE_HARDWARE_PB_H_INCLUDED
 #define PB_REMOTE_HARDWARE_PB_H_INCLUDED
@@ -10,13 +10,22 @@
 #endif
 
 /* Enum definitions */
-typedef enum _HardwareMessage_Type { 
-    HardwareMessage_Type_UNSET = 0, 
-    HardwareMessage_Type_WRITE_GPIOS = 1, 
-    HardwareMessage_Type_WATCH_GPIOS = 2, 
-    HardwareMessage_Type_GPIOS_CHANGED = 3, 
-    HardwareMessage_Type_READ_GPIOS = 4, 
-    HardwareMessage_Type_READ_GPIOS_REPLY = 5 
+/* TODO: REPLACE */
+typedef enum _HardwareMessage_Type {
+    /* Unset/unused */
+    HardwareMessage_Type_UNSET = 0,
+    /* Set gpio gpios based on gpio_mask/gpio_value */
+    HardwareMessage_Type_WRITE_GPIOS = 1,
+    /* We are now interested in watching the gpio_mask gpios.
+ If the selected gpios change, please broadcast GPIOS_CHANGED.
+ Will implicitly change the gpios requested to be INPUT gpios. */
+    HardwareMessage_Type_WATCH_GPIOS = 2,
+    /* The gpios listed in gpio_mask have changed, the new values are listed in gpio_value */
+    HardwareMessage_Type_GPIOS_CHANGED = 3,
+    /* Read the gpios specified in gpio_mask, send back a READ_GPIOS_REPLY reply with gpio_value populated */
+    HardwareMessage_Type_READ_GPIOS = 4,
+    /* A reply to READ_GPIOS. gpio_mask and gpio_value will be populated */
+    HardwareMessage_Type_READ_GPIOS_REPLY = 5
 } HardwareMessage_Type;
 
 /* Struct definitions */
@@ -29,7 +38,7 @@ typedef enum _HardwareMessage_Type {
  because no security yet (beyond the channel mechanism).
  It should be off by default and then protected based on some TBD mechanism
  (a special channel once multichannel support is included?) */
-typedef struct _HardwareMessage { 
+typedef struct _HardwareMessage {
     /* What type of HardwareMessage is this? */
     HardwareMessage_Type type;
     /* What gpios are we changing. Not used for all MessageTypes, see MessageType for details */
@@ -40,15 +49,17 @@ typedef struct _HardwareMessage {
 } HardwareMessage;
 
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Helper constants for enums */
 #define _HardwareMessage_Type_MIN HardwareMessage_Type_UNSET
 #define _HardwareMessage_Type_MAX HardwareMessage_Type_READ_GPIOS_REPLY
 #define _HardwareMessage_Type_ARRAYSIZE ((HardwareMessage_Type)(HardwareMessage_Type_READ_GPIOS_REPLY+1))
 
+#define HardwareMessage_type_ENUMTYPE HardwareMessage_Type
 
-#ifdef __cplusplus
-extern "C" {
-#endif
 
 /* Initializer values for message structs */
 #define HardwareMessage_init_default             {_HardwareMessage_Type_MIN, 0, 0}

src/mesh/generated/storeforward.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "storeforward.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/storeforward.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_STOREFORWARD_PB_H_INCLUDED
 #define PB_STOREFORWARD_PB_H_INCLUDED
@@ -10,88 +10,126 @@
 #endif
 
 /* Enum definitions */
-typedef enum _StoreAndForward_RequestResponse { 
-    StoreAndForward_RequestResponse_UNSET = 0, 
-    StoreAndForward_RequestResponse_ROUTER_ERROR = 1, 
-    StoreAndForward_RequestResponse_ROUTER_HEARTBEAT = 2, 
-    StoreAndForward_RequestResponse_ROUTER_PING = 3, 
-    StoreAndForward_RequestResponse_ROUTER_PONG = 4, 
-    StoreAndForward_RequestResponse_ROUTER_BUSY = 5, 
-    StoreAndForward_RequestResponse_ROUTER_HISTORY = 6, 
-    StoreAndForward_RequestResponse_CLIENT_ERROR = 101, 
-    StoreAndForward_RequestResponse_CLIENT_HISTORY = 102, 
-    StoreAndForward_RequestResponse_CLIENT_STATS = 103, 
-    StoreAndForward_RequestResponse_CLIENT_PING = 104, 
-    StoreAndForward_RequestResponse_CLIENT_PONG = 105, 
-    StoreAndForward_RequestResponse_CLIENT_ABORT = 106 
+/* 001 - 063 = From Router
+ 064 - 127 = From Client */
+typedef enum _StoreAndForward_RequestResponse {
+    /* Unset/unused */
+    StoreAndForward_RequestResponse_UNSET = 0,
+    /* Router is an in error state. */
+    StoreAndForward_RequestResponse_ROUTER_ERROR = 1,
+    /* Router heartbeat */
+    StoreAndForward_RequestResponse_ROUTER_HEARTBEAT = 2,
+    /* Router has requested the client respond. This can work as a
+ "are you there" message. */
+    StoreAndForward_RequestResponse_ROUTER_PING = 3,
+    /* The response to a "Ping" */
+    StoreAndForward_RequestResponse_ROUTER_PONG = 4,
+    /* Router is currently busy. Please try again later. */
+    StoreAndForward_RequestResponse_ROUTER_BUSY = 5,
+    /* Router is responding to a request for history. */
+    StoreAndForward_RequestResponse_ROUTER_HISTORY = 6,
+    /* Router is responding to a request for stats. */
+    StoreAndForward_RequestResponse_ROUTER_STATS = 7,
+    /* Client is an in error state. */
+    StoreAndForward_RequestResponse_CLIENT_ERROR = 64,
+    /* Client has requested a replay from the router. */
+    StoreAndForward_RequestResponse_CLIENT_HISTORY = 65,
+    /* Client has requested stats from the router. */
+    StoreAndForward_RequestResponse_CLIENT_STATS = 66,
+    /* Client has requested the router respond. This can work as a
+ "are you there" message. */
+    StoreAndForward_RequestResponse_CLIENT_PING = 67,
+    /* The response to a "Ping" */
+    StoreAndForward_RequestResponse_CLIENT_PONG = 68,
+    /* Client has requested that the router abort processing the client's request */
+    StoreAndForward_RequestResponse_CLIENT_ABORT = 106
 } StoreAndForward_RequestResponse;
 
 /* Struct definitions */
-typedef struct _StoreAndForward_Heartbeat { 
-    uint32_t period;
-    uint32_t secondary;
-} StoreAndForward_Heartbeat;
-
-typedef struct _StoreAndForward_History { 
-    uint32_t history_messages;
-    uint32_t window;
-    uint32_t last_request;
-} StoreAndForward_History;
-
-typedef struct _StoreAndForward_Statistics { 
+/* TODO: REPLACE */
+typedef struct _StoreAndForward_Statistics {
+    /* Number of messages we have ever seen */
     uint32_t messages_total;
+    /* Number of messages we have currently saved our history. */
     uint32_t messages_saved;
+    /* Maximum number of messages we will save */
     uint32_t messages_max;
+    /* Router uptime in seconds */
     uint32_t up_time;
+    /* Number of times any client sent a request to the S&F. */
     uint32_t requests;
+    /* Number of times the history was requested. */
     uint32_t requests_history;
+    /* Is the heartbeat enabled on the server? */
     bool heartbeat;
+    /* Is the heartbeat enabled on the server? */
     uint32_t return_max;
+    /* Is the heartbeat enabled on the server? */
     uint32_t return_window;
 } StoreAndForward_Statistics;
 
 /* TODO: REPLACE */
-typedef struct _StoreAndForward { 
+typedef struct _StoreAndForward_History {
+    /* Number of that will be sent to the client */
+    uint32_t history_messages;
+    /* The window of messages that was used to filter the history client requested */
+    uint32_t window;
+    /* The window of messages that was used to filter the history client requested */
+    uint32_t last_request;
+} StoreAndForward_History;
+
+/* TODO: REPLACE */
+typedef struct _StoreAndForward_Heartbeat {
+    /* Number of that will be sent to the client */
+    uint32_t period;
+    /* If set, this is not the primary Store & Forward router on the mesh */
+    uint32_t secondary;
+} StoreAndForward_Heartbeat;
+
+/* TODO: REPLACE */
+typedef struct _StoreAndForward {
     /* TODO: REPLACE */
     StoreAndForward_RequestResponse rr;
-    /* TODO: REPLACE */
-    bool has_stats;
-    StoreAndForward_Statistics stats;
-    /* TODO: REPLACE */
-    bool has_history;
-    StoreAndForward_History history;
-    /* TODO: REPLACE */
-    bool has_heartbeat;
-    StoreAndForward_Heartbeat heartbeat;
+    pb_size_t which_variant;
+    union {
+        /* TODO: REPLACE */
+        StoreAndForward_Statistics stats;
+        /* TODO: REPLACE */
+        StoreAndForward_History history;
+        /* TODO: REPLACE */
+        StoreAndForward_Heartbeat heartbeat;
+        /* Empty Payload */
+        bool empty;
+    } variant;
 } StoreAndForward;
 
 
-/* Helper constants for enums */
-#define _StoreAndForward_RequestResponse_MIN StoreAndForward_RequestResponse_UNSET
-#define _StoreAndForward_RequestResponse_MAX StoreAndForward_RequestResponse_CLIENT_ABORT
-#define _StoreAndForward_RequestResponse_ARRAYSIZE ((StoreAndForward_RequestResponse)(StoreAndForward_RequestResponse_CLIENT_ABORT+1))
-
-
 #ifdef __cplusplus
 extern "C" {
 #endif
 
+/* Helper constants for enums */
+#define _StoreAndForward_RequestResponse_MIN StoreAndForward_RequestResponse_UNSET
+#define _StoreAndForward_RequestResponse_MAX StoreAndForward_RequestResponse_CLIENT_ABORT
+#define _StoreAndForward_RequestResponse_ARRAYSIZE ((StoreAndForward_RequestResponse)(StoreAndForward_RequestResponse_CLIENT_ABORT+1))
+
+#define StoreAndForward_rr_ENUMTYPE StoreAndForward_RequestResponse
+
+
+
+
+
 /* Initializer values for message structs */
-#define StoreAndForward_init_default             {_StoreAndForward_RequestResponse_MIN, false, StoreAndForward_Statistics_init_default, false, StoreAndForward_History_init_default, false, StoreAndForward_Heartbeat_init_default}
+#define StoreAndForward_init_default             {_StoreAndForward_RequestResponse_MIN, 0, {StoreAndForward_Statistics_init_default}}
 #define StoreAndForward_Statistics_init_default  {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define StoreAndForward_History_init_default     {0, 0, 0}
 #define StoreAndForward_Heartbeat_init_default   {0, 0}
-#define StoreAndForward_init_zero                {_StoreAndForward_RequestResponse_MIN, false, StoreAndForward_Statistics_init_zero, false, StoreAndForward_History_init_zero, false, StoreAndForward_Heartbeat_init_zero}
+#define StoreAndForward_init_zero                {_StoreAndForward_RequestResponse_MIN, 0, {StoreAndForward_Statistics_init_zero}}
 #define StoreAndForward_Statistics_init_zero     {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define StoreAndForward_History_init_zero        {0, 0, 0}
 #define StoreAndForward_Heartbeat_init_zero      {0, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
-#define StoreAndForward_Heartbeat_period_tag     1
-#define StoreAndForward_Heartbeat_secondary_tag  2
-#define StoreAndForward_History_history_messages_tag 1
-#define StoreAndForward_History_window_tag       2
-#define StoreAndForward_History_last_request_tag 3
 #define StoreAndForward_Statistics_messages_total_tag 1
 #define StoreAndForward_Statistics_messages_saved_tag 2
 #define StoreAndForward_Statistics_messages_max_tag 3
@@ -101,22 +139,29 @@ extern "C" {
 #define StoreAndForward_Statistics_heartbeat_tag 7
 #define StoreAndForward_Statistics_return_max_tag 8
 #define StoreAndForward_Statistics_return_window_tag 9
+#define StoreAndForward_History_history_messages_tag 1
+#define StoreAndForward_History_window_tag       2
+#define StoreAndForward_History_last_request_tag 3
+#define StoreAndForward_Heartbeat_period_tag     1
+#define StoreAndForward_Heartbeat_secondary_tag  2
 #define StoreAndForward_rr_tag                   1
 #define StoreAndForward_stats_tag                2
 #define StoreAndForward_history_tag              3
 #define StoreAndForward_heartbeat_tag            4
+#define StoreAndForward_empty_tag                5
 
 /* Struct field encoding specification for nanopb */
 #define StoreAndForward_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UENUM,    rr,                1) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  stats,             2) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  history,           3) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  heartbeat,         4)
+X(a, STATIC,   ONEOF,    MESSAGE,  (variant,stats,variant.stats),   2) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (variant,history,variant.history),   3) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (variant,heartbeat,variant.heartbeat),   4) \
+X(a, STATIC,   ONEOF,    BOOL,     (variant,empty,variant.empty),   5)
 #define StoreAndForward_CALLBACK NULL
 #define StoreAndForward_DEFAULT NULL
-#define StoreAndForward_stats_MSGTYPE StoreAndForward_Statistics
-#define StoreAndForward_history_MSGTYPE StoreAndForward_History
-#define StoreAndForward_heartbeat_MSGTYPE StoreAndForward_Heartbeat
+#define StoreAndForward_variant_stats_MSGTYPE StoreAndForward_Statistics
+#define StoreAndForward_variant_history_MSGTYPE StoreAndForward_History
+#define StoreAndForward_variant_heartbeat_MSGTYPE StoreAndForward_Heartbeat
 
 #define StoreAndForward_Statistics_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   messages_total,    1) \
@@ -159,7 +204,7 @@ extern const pb_msgdesc_t StoreAndForward_Heartbeat_msg;
 #define StoreAndForward_Heartbeat_size           12
 #define StoreAndForward_History_size             18
 #define StoreAndForward_Statistics_size          50
-#define StoreAndForward_size                     88
+#define StoreAndForward_size                     54
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/telemetry.pb.c

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #include "telemetry.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/telemetry.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.6 */
+/* Generated by nanopb-0.4.7 */
 
 #ifndef PB_TELEMETRY_PB_H_INCLUDED
 #define PB_TELEMETRY_PB_H_INCLUDED
@@ -11,36 +11,38 @@
 
 /* Enum definitions */
 /* TODO: REPLACE */
-typedef enum _TelemetrySensorType { 
+typedef enum _TelemetrySensorType {
     /* No external telemetry sensor explicitly set */
-    TelemetrySensorType_SENSOR_UNSET = 0, 
+    TelemetrySensorType_SENSOR_UNSET = 0,
     /* High accuracy temperature, pressure, humidity */
-    TelemetrySensorType_BME280 = 1, 
+    TelemetrySensorType_BME280 = 1,
     /* High accuracy temperature, pressure, humidity, and air resistance */
-    TelemetrySensorType_BME680 = 2, 
+    TelemetrySensorType_BME680 = 2,
     /* Very high accuracy temperature */
-    TelemetrySensorType_MCP9808 = 3, 
+    TelemetrySensorType_MCP9808 = 3,
     /* Moderate accuracy current and voltage */
-    TelemetrySensorType_INA260 = 4, 
+    TelemetrySensorType_INA260 = 4,
     /* Moderate accuracy current and voltage */
-    TelemetrySensorType_INA219 = 5, 
+    TelemetrySensorType_INA219 = 5,
     /* High accuracy temperature and pressure */
-    TelemetrySensorType_BMP280 = 6, 
+    TelemetrySensorType_BMP280 = 6,
     /* High accuracy temperature and humidity */
-    TelemetrySensorType_SHTC3 = 7, 
+    TelemetrySensorType_SHTC3 = 7,
     /* High accuracy pressure */
-    TelemetrySensorType_LPS22 = 8, 
+    TelemetrySensorType_LPS22 = 8,
     /* 3-Axis magnetic sensor */
-    TelemetrySensorType_QMC6310 = 9, 
+    TelemetrySensorType_QMC6310 = 9,
     /* 6-Axis inertial measurement sensor */
-    TelemetrySensorType_QMI8658 = 10, 
+    TelemetrySensorType_QMI8658 = 10,
     /* 3-Axis magnetic sensor */
-    TelemetrySensorType_QMC5883L = 11 
+    TelemetrySensorType_QMC5883L = 11,
+    /* High accuracy temperature and humidity */
+    TelemetrySensorType_SHT31 = 12
 } TelemetrySensorType;
 
 /* Struct definitions */
 /* Key native device metrics such as battery level */
-typedef struct _DeviceMetrics { 
+typedef struct _DeviceMetrics {
     /* 1-100 (0 means powered) */
     uint32_t battery_level;
     /* Voltage measured */
@@ -52,7 +54,7 @@ typedef struct _DeviceMetrics {
 } DeviceMetrics;
 
 /* Weather station or other environmental metrics */
-typedef struct _EnvironmentMetrics { 
+typedef struct _EnvironmentMetrics {
     /* Temperature measured */
     float temperature;
     /* Relative humidity percent measured */
@@ -68,7 +70,7 @@ typedef struct _EnvironmentMetrics {
 } EnvironmentMetrics;
 
 /* Types of Measurements the telemetry module is equipped to handle */
-typedef struct _Telemetry { 
+typedef struct _Telemetry {
     /* This is usually not sent over the mesh (to save space), but it is sent
  from the phone so that the local device can set its RTC If it is sent over
  the mesh (because there are devices on the mesh without GPS), it will only
@@ -85,16 +87,19 @@ typedef struct _Telemetry {
 } Telemetry;
 
 
-/* Helper constants for enums */
-#define _TelemetrySensorType_MIN TelemetrySensorType_SENSOR_UNSET
-#define _TelemetrySensorType_MAX TelemetrySensorType_QMC5883L
-#define _TelemetrySensorType_ARRAYSIZE ((TelemetrySensorType)(TelemetrySensorType_QMC5883L+1))
-
-
 #ifdef __cplusplus
 extern "C" {
 #endif
 
+/* Helper constants for enums */
+#define _TelemetrySensorType_MIN TelemetrySensorType_SENSOR_UNSET
+#define _TelemetrySensorType_MAX TelemetrySensorType_SHT31
+#define _TelemetrySensorType_ARRAYSIZE ((TelemetrySensorType)(TelemetrySensorType_SHT31+1))
+
+
+
+
+
 /* Initializer values for message structs */
 #define DeviceMetrics_init_default               {0, 0, 0, 0}
 #define EnvironmentMetrics_init_default          {0, 0, 0, 0, 0, 0}

src/mesh/http/WiFiAPClient.cpp

@@ -1,7 +1,7 @@
-#include "mesh/http/WiFiAPClient.h"
 #include "NodeDB.h"
 #include "RTC.h"
 #include "concurrency/Periodic.h"
+#include "mesh/http/WiFiAPClient.h"
 #include "configuration.h"
 #include "main.h"
 #include "mesh/http/WebServer.h"
@@ -37,9 +37,9 @@ bool APStartupComplete = 0;
 
 unsigned long lastrun_ntp = 0;
 
-static bool needReconnect = true; // If we create our reconnector, run it once at the beginning
+bool needReconnect = true; // If we create our reconnector, run it once at the beginning
 
-static Periodic *wifiReconnect;
+Periodic *wifiReconnect;
 
 static int32_t reconnectWiFi()
 {
@@ -56,29 +56,15 @@ static int32_t reconnectWiFi()
         // Make sure we clear old connection credentials
         WiFi.disconnect(false, true);
 
-        DEBUG_MSG("... Reconnecting to WiFi access point %s\n",wifiName);
-
-        int n = WiFi.scanNetworks();
-
-        if (n > 0) {
-            for (int i = 0; i < n; ++i) {
-                DEBUG_MSG("Found WiFi network %s, signal strength %d\n", WiFi.SSID(i).c_str(), WiFi.RSSI(i));
-                yield();
-            }
-            WiFi.mode(WIFI_MODE_STA);
-            WiFi.begin(wifiName, wifiPsw);
-        } else {
-            DEBUG_MSG("No networks found during site survey. Rebooting MCU...\n");
-            screen->startRebootScreen();
-            rebootAtMsec = millis() + 5000;
-        }
-
+        DEBUG_MSG("Reconnecting to WiFi access point %s\n",wifiName);
 
+        WiFi.mode(WIFI_MODE_STA);
+        WiFi.begin(wifiName, wifiPsw);
     }
 
 #ifndef DISABLE_NTP
     if (WiFi.isConnected() && (((millis() - lastrun_ntp) > 43200000) || (lastrun_ntp == 0))) { // every 12 hours
-        DEBUG_MSG("Updating NTP time\n");
+        DEBUG_MSG("Updating NTP time from %s\n",config.network.ntp_server);
         if (timeClient.update()) {
             DEBUG_MSG("NTP Request Success - Setting RTCQualityNTP if needed\n");
 
@@ -129,7 +115,7 @@ static void onNetworkConnected()
 {
     if (!APStartupComplete) {
         // Start web server
-        DEBUG_MSG("... Starting network services\n");
+        DEBUG_MSG("Starting network services\n");
 
         // start mdns
         if (!MDNS.begin("Meshtastic")) {
@@ -168,6 +154,8 @@ bool initWifi()
 
         createSSLCert();
 
+        esp_wifi_set_storage(WIFI_STORAGE_RAM); // Disable flash storage for WiFi credentials
+
         if (!*wifiPsw) // Treat empty password as no password
             wifiPsw = NULL;
 
@@ -194,7 +182,7 @@ bool initWifi()
 
             WiFi.onEvent(
                 [](WiFiEvent_t event, WiFiEventInfo_t info) {
-                    Serial.print("\nWiFi lost connection. Reason: ");
+                    Serial.print("WiFi lost connection. Reason: ");
                     Serial.println(info.wifi_sta_disconnected.reason);
 
                     /*
@@ -221,91 +209,137 @@ bool initWifi()
 // Called by the Espressif SDK to
 static void WiFiEvent(WiFiEvent_t event)
 {
-    DEBUG_MSG("************ [WiFi-event] event: %d ************\n", event);
+    DEBUG_MSG("WiFi-Event %d: ", event);
 
     switch (event) {
-    case SYSTEM_EVENT_WIFI_READY:
+    case ARDUINO_EVENT_WIFI_READY:
         DEBUG_MSG("WiFi interface ready\n");
         break;
-    case SYSTEM_EVENT_SCAN_DONE:
+    case ARDUINO_EVENT_WIFI_SCAN_DONE:
         DEBUG_MSG("Completed scan for access points\n");
         break;
-    case SYSTEM_EVENT_STA_START:
+    case ARDUINO_EVENT_WIFI_STA_START:
         DEBUG_MSG("WiFi station started\n");
         break;
-    case SYSTEM_EVENT_STA_STOP:
+    case ARDUINO_EVENT_WIFI_STA_STOP:
         DEBUG_MSG("WiFi station stopped\n");
         break;
-    case SYSTEM_EVENT_STA_CONNECTED:
+    case ARDUINO_EVENT_WIFI_STA_CONNECTED:
         DEBUG_MSG("Connected to access point\n");
         break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
+    case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         DEBUG_MSG("Disconnected from WiFi access point\n");
         WiFi.disconnect(false, true);
         needReconnect = true;
         wifiReconnect->setIntervalFromNow(1000);
         break;
-    case SYSTEM_EVENT_STA_AUTHMODE_CHANGE:
+    case ARDUINO_EVENT_WIFI_STA_AUTHMODE_CHANGE:
         DEBUG_MSG("Authentication mode of access point has changed\n");
         break;
-    case SYSTEM_EVENT_STA_GOT_IP:
+    case ARDUINO_EVENT_WIFI_STA_GOT_IP:
         DEBUG_MSG("Obtained IP address: ");
         Serial.println(WiFi.localIP());
         onNetworkConnected();
         break;
-    case SYSTEM_EVENT_STA_LOST_IP:
+    case ARDUINO_EVENT_WIFI_STA_GOT_IP6:
+        DEBUG_MSG("Obtained IP6 address: ");
+        Serial.println(WiFi.localIPv6());
+        break;
+    case ARDUINO_EVENT_WIFI_STA_LOST_IP:
         DEBUG_MSG("Lost IP address and IP address is reset to 0\n");
         WiFi.disconnect(false, true);
         needReconnect = true;
         wifiReconnect->setIntervalFromNow(1000);
         break;
-    case SYSTEM_EVENT_STA_WPS_ER_SUCCESS:
+    case ARDUINO_EVENT_WPS_ER_SUCCESS:
         DEBUG_MSG("WiFi Protected Setup (WPS): succeeded in enrollee mode\n");
         break;
-    case SYSTEM_EVENT_STA_WPS_ER_FAILED:
+    case ARDUINO_EVENT_WPS_ER_FAILED:
         DEBUG_MSG("WiFi Protected Setup (WPS): failed in enrollee mode\n");
         break;
-    case SYSTEM_EVENT_STA_WPS_ER_TIMEOUT:
+    case ARDUINO_EVENT_WPS_ER_TIMEOUT:
         DEBUG_MSG("WiFi Protected Setup (WPS): timeout in enrollee mode\n");
         break;
-    case SYSTEM_EVENT_STA_WPS_ER_PIN:
+    case ARDUINO_EVENT_WPS_ER_PIN:
         DEBUG_MSG("WiFi Protected Setup (WPS): pin code in enrollee mode\n");
         break;
-    case SYSTEM_EVENT_AP_START:
+    case ARDUINO_EVENT_WPS_ER_PBC_OVERLAP:
+        DEBUG_MSG("WiFi Protected Setup (WPS): push button overlap in enrollee mode\n");
+        break;
+    case ARDUINO_EVENT_WIFI_AP_START:
         DEBUG_MSG("WiFi access point started\n");
         break;
-    case SYSTEM_EVENT_AP_STOP:
+    case ARDUINO_EVENT_WIFI_AP_STOP:
         DEBUG_MSG("WiFi access point stopped\n");
         break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
+    case ARDUINO_EVENT_WIFI_AP_STACONNECTED:
         DEBUG_MSG("Client connected\n");
         break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
+    case ARDUINO_EVENT_WIFI_AP_STADISCONNECTED:
         DEBUG_MSG("Client disconnected\n");
         break;
-    case SYSTEM_EVENT_AP_STAIPASSIGNED:
+    case ARDUINO_EVENT_WIFI_AP_STAIPASSIGNED:
         DEBUG_MSG("Assigned IP address to client\n");
         break;
-    case SYSTEM_EVENT_AP_PROBEREQRECVED:
+    case ARDUINO_EVENT_WIFI_AP_PROBEREQRECVED:
         DEBUG_MSG("Received probe request\n");
         break;
-    case SYSTEM_EVENT_GOT_IP6:
+    case ARDUINO_EVENT_WIFI_AP_GOT_IP6:
         DEBUG_MSG("IPv6 is preferred\n");
         break;
-    case SYSTEM_EVENT_ETH_START:
+    case ARDUINO_EVENT_WIFI_FTM_REPORT:
+        DEBUG_MSG("Fast Transition Management report\n");
+        break;
+    case ARDUINO_EVENT_ETH_START:
         DEBUG_MSG("Ethernet started\n");
         break;
-    case SYSTEM_EVENT_ETH_STOP:
+    case ARDUINO_EVENT_ETH_STOP:
         DEBUG_MSG("Ethernet stopped\n");
         break;
-    case SYSTEM_EVENT_ETH_CONNECTED:
+    case ARDUINO_EVENT_ETH_CONNECTED:
         DEBUG_MSG("Ethernet connected\n");
         break;
-    case SYSTEM_EVENT_ETH_DISCONNECTED:
+    case ARDUINO_EVENT_ETH_DISCONNECTED:
         DEBUG_MSG("Ethernet disconnected\n");
         break;
-    case SYSTEM_EVENT_ETH_GOT_IP:
-        DEBUG_MSG("Obtained IP address (SYSTEM_EVENT_ETH_GOT_IP)\n");
+    case ARDUINO_EVENT_ETH_GOT_IP:
+        DEBUG_MSG("Obtained IP address (ARDUINO_EVENT_ETH_GOT_IP)\n");
+        break;
+    case ARDUINO_EVENT_ETH_GOT_IP6:
+        DEBUG_MSG("Obtained IP6 address (ARDUINO_EVENT_ETH_GOT_IP6)\n");
+        break;
+    case ARDUINO_EVENT_SC_SCAN_DONE:
+        DEBUG_MSG("SmartConfig: Scan done\n");
+        break;
+    case ARDUINO_EVENT_SC_FOUND_CHANNEL:
+        DEBUG_MSG("SmartConfig: Found channel\n");
+        break;
+    case ARDUINO_EVENT_SC_GOT_SSID_PSWD:
+        DEBUG_MSG("SmartConfig: Got SSID and password\n");
+        break;
+    case ARDUINO_EVENT_SC_SEND_ACK_DONE:
+        DEBUG_MSG("SmartConfig: Send ACK done\n");
+        break;
+    case ARDUINO_EVENT_PROV_INIT:
+        DEBUG_MSG("Provisioning: Init\n");
+        break;
+    case ARDUINO_EVENT_PROV_DEINIT:
+        DEBUG_MSG("Provisioning: Stopped\n");
+        break;
+    case ARDUINO_EVENT_PROV_START:
+        DEBUG_MSG("Provisioning: Started\n");
+        break;
+    case ARDUINO_EVENT_PROV_END:
+        DEBUG_MSG("Provisioning: End\n");
+        break;
+    case ARDUINO_EVENT_PROV_CRED_RECV:
+        DEBUG_MSG("Provisioning: Credentials received\n");
+        break;
+    case ARDUINO_EVENT_PROV_CRED_FAIL:
+        DEBUG_MSG("Provisioning: Credentials failed\n");
+        break;
+    case ARDUINO_EVENT_PROV_CRED_SUCCESS:
+        DEBUG_MSG("Provisioning: Credentials success\n");
         break;
     default:
         break;

src/mesh/http/WiFiAPClient.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "configuration.h"
+#include "concurrency/Periodic.h"
 #include <Arduino.h>
 #include <functional>
 
@@ -8,6 +9,9 @@
 #include <WiFi.h>
 #endif
 
+extern bool needReconnect;
+extern concurrency::Periodic *wifiReconnect;
+
 /// @return true if wifi is now in use
 bool initWifi();
 

src/mesh/wifi/WiFiServerAPI.cpp

@@ -14,7 +14,7 @@ void initApiServer(int port)
     }
 }
 
-WiFiServerAPI::WiFiServerAPI(WiFiClient &_client) : StreamAPI(&client), client(_client)
+WiFiServerAPI::WiFiServerAPI(WiFiClient &_client) : StreamAPI(&client), concurrency::OSThread("WiFiServerAPI"), client(_client)
 {
     DEBUG_MSG("Incoming wifi connection\n");
 }
@@ -42,7 +42,7 @@ bool WiFiServerAPI::checkIsConnected()
 int32_t WiFiServerAPI::runOnce()
 {
     if (client.connected()) {
-        return StreamAPI::runOnce();
+        return StreamAPI::runOncePart();
     } else {
         DEBUG_MSG("Client dropped connection, suspending API service\n");
         enabled = false; // we no longer need to run

src/mesh/wifi/WiFiServerAPI.h

@@ -7,7 +7,7 @@
  * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs
  * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs).
  */
-class WiFiServerAPI : public StreamAPI
+class WiFiServerAPI : public StreamAPI, private concurrency::OSThread
 {
   private:
     WiFiClient client;

src/modules/AdminModule.cpp

@@ -112,12 +112,15 @@ bool AdminModule::handleReceivedProtobuf(const MeshPacket &mp, AdminMessage *r)
 #ifdef ARCH_ESP32        
         if (BleOta::getOtaAppVersion().isEmpty()) {
             DEBUG_MSG("No OTA firmware available, scheduling regular reboot in %d seconds\n", s);
+            screen->startRebootScreen();
         }else{
+            screen->startFirmwareUpdateScreen();
             BleOta::switchToOtaApp();
             DEBUG_MSG("Rebooting to OTA in %d seconds\n", s);
         }
 #else
         DEBUG_MSG("Not on ESP32, scheduling regular reboot in %d seconds\n", s);
+        screen->startRebootScreen();
 #endif
         rebootAtMsec = (s < 0) ? 0 : (millis() + s * 1000);
         break;
@@ -192,6 +195,7 @@ bool AdminModule::handleReceivedProtobuf(const MeshPacket &mp, AdminMessage *r)
 void AdminModule::handleSetOwner(const User &o)
 {
     int changed = 0;
+    bool licensed_changed = false;
 
     if (*o.long_name) {
         changed |= strcmp(owner.long_name, o.long_name);
@@ -207,12 +211,14 @@ void AdminModule::handleSetOwner(const User &o)
     }
     if (owner.is_licensed != o.is_licensed) {
         changed = 1;
+        licensed_changed = true;
         owner.is_licensed = o.is_licensed;
+        config.lora.override_duty_cycle = owner.is_licensed; // override duty cycle for licensed operators 
     }
 
     if (changed) { // If nothing really changed, don't broadcast on the network or write to flash
         service.reloadOwner(!hasOpenEditTransaction);
-        saveChanges(SEGMENT_DEVICESTATE);
+        licensed_changed ? saveChanges(SEGMENT_CONFIG | SEGMENT_DEVICESTATE) : saveChanges(SEGMENT_DEVICESTATE);
     }
 }
 
@@ -509,7 +515,7 @@ void AdminModule::saveChanges(int saveWhat, bool shouldReboot)
     }
 }
 
-AdminModule::AdminModule() : ProtobufModule("Admin", PortNum_ADMIN_APP, AdminMessage_fields)
+AdminModule::AdminModule() : ProtobufModule("Admin", PortNum_ADMIN_APP, &AdminMessage_msg)
 {
     // restrict to the admin channel for rx
     boundChannel = Channels::adminChannel;

src/modules/CannedMessageModule.cpp

@@ -45,8 +45,7 @@ CannedMessageModule *cannedMessageModule;
 
 // TODO: move it into NodeDB.h!
 extern bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct);
-extern bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields,
-                      const void *dest_struct);
+extern bool saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct);
 
 CannedMessageModule::CannedMessageModule()
     : SinglePortModule("canned", PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("CannedMessageModule")
@@ -451,11 +450,15 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
         if (this->destSelect) {
             display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
             display->setColor(BLACK);
+            display->drawStringf(1 + x, 0 + y, buffer, "To: %s", cannedMessageModule->getNodeName(this->dest));
         }
         display->drawStringf(0 + x, 0 + y, buffer, "To: %s", cannedMessageModule->getNodeName(this->dest));
         // used chars right aligned
         sprintf(buffer, "%d left", Constants_DATA_PAYLOAD_LEN - this->freetext.length());
         display->drawString(x + display->getWidth() - display->getStringWidth(buffer), y + 0, buffer);
+        if (this->destSelect) {
+            display->drawString(x + display->getWidth() - display->getStringWidth(buffer) - 1, y + 0, buffer);
+        }
         display->setColor(WHITE);
         display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), cannedMessageModule->drawWithCursor(cannedMessageModule->freetext, cannedMessageModule->cursor));
     } else {
@@ -476,7 +479,7 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
 void CannedMessageModule::loadProtoForModule()
 {
     if (!loadProto(cannedMessagesConfigFile, CannedMessageModuleConfig_size, sizeof(cannedMessagesConfigFile),
-                   CannedMessageModuleConfig_fields, &cannedMessageModuleConfig)) {
+                   &CannedMessageModuleConfig_msg, &cannedMessageModuleConfig)) {
         installDefaultCannedMessageModuleConfig();
     }
 }
@@ -495,8 +498,8 @@ bool CannedMessageModule::saveProtoForModule()
     FS.mkdir("/prefs");
 #endif
 
-    okay &= saveProto(cannedMessagesConfigFile, CannedMessageModuleConfig_size, sizeof(cannedMessageModuleConfig),
-                      CannedMessageModuleConfig_fields, &cannedMessageModuleConfig);
+    okay &= saveProto(cannedMessagesConfigFile, CannedMessageModuleConfig_size,
+        &CannedMessageModuleConfig_msg, &cannedMessageModuleConfig);
 
     return okay;
 }

src/modules/ExternalNotificationModule.cpp

@@ -11,41 +11,9 @@
 #define PIN_BUZZER false
 #endif
 
-//#include <assert.h>
-
 /*
-
     Documentation:
-        https://github.com/meshtastic/firmware/blob/master/docs/software/modules/ExternalNotificationModule.md
-
-    This module supports:
-        https://github.com/meshtastic/firmware/issues/654
-
-
-    Quick reference:
-
-        moduleConfig.external_notification.enabled
-            0 = Disabled (Default)
-            1 = Enabled
-
-        moduleConfig.external_notification.active
-            0 = Active Low (Default)
-            1 = Active High
-
-        moduleConfig.external_notification.alert_message
-            0 = Disabled (Default)
-            1 = Alert when a text message comes
-
-        moduleConfig.external_notification.alert_bell
-            0 = Disabled (Default)
-            1 = Alert when the bell character is received
-
-        moduleConfig.external_notification.output
-            GPIO of the output. (Default = 13)
-
-        moduleConfig.external_notification.output_ms
-            Amount of time in ms for the alert. Default is 1000.
-
+        https://meshtastic.org/docs/settings/moduleconfig/external-notification
 */
 
 // Default configurations
@@ -58,59 +26,121 @@
 
 #define ASCII_BELL 0x07
 
-bool externalCurrentState = 0;
-uint32_t externalTurnedOn = 0;
+ExternalNotificationModule *externalNotificationModule;
+
+bool externalCurrentState[3] = {};
+
+uint32_t externalTurnedOn[3] = {};
 
 int32_t ExternalNotificationModule::runOnce()
 {
-    /*
-        Uncomment the preferences below if you want to use the module
-        without having to configure it from the PythonAPI or WebUI.
-    */
-
-    // moduleConfig.external_notification.enabled = 1;
-    // moduleConfig.external_notification.alert_message = 1;
-
-    // moduleConfig.external_notification.active = 1;
-    // moduleConfig.external_notification.alert_bell = 1;
-    // moduleConfig.external_notification.output_ms = 1000;
-    // moduleConfig.external_notification.output = 13;
-
-    if (externalCurrentState && !moduleConfig.external_notification.use_pwm) {
+    if (!moduleConfig.external_notification.enabled) {
+        return INT32_MAX; // we don't need this thread here...
+    } else {
+#ifndef ARCH_PORTDUINO
+        if ((nagCycleCutoff < millis()) && !rtttl::isPlaying()) {
+#else
+        if (nagCycleCutoff < millis()) {
+#endif
+            nagCycleCutoff = UINT32_MAX;
+            DEBUG_MSG("Turning off external notification: ");
+            for (int i = 0; i < 2; i++) {
+                if (getExternal(i)) {
+                    setExternalOff(i);
+                    externalTurnedOn[i] = 0;
+                    DEBUG_MSG("%d ", i);
+                }
+            }
+            DEBUG_MSG("\n");
+            return INT32_MAX; // save cycles till we're needed again
+        }
 
         // If the output is turned on, turn it back off after the given period of time.
-        if (externalTurnedOn + (moduleConfig.external_notification.output_ms
+        if (nagCycleCutoff != UINT32_MAX) {
+            if (externalTurnedOn[0] + (moduleConfig.external_notification.output_ms
                                     ? moduleConfig.external_notification.output_ms
-                                    : EXT_NOTIFICATION_MODULE_OUTPUT_MS) <
-            millis()) {
-            DEBUG_MSG("Turning off external notification\n");
-            setExternalOff();
+                                    : EXT_NOTIFICATION_MODULE_OUTPUT_MS) < millis()) {
+                getExternal(0) ? setExternalOff(0) : setExternalOn(0);
+            }
+            if (externalTurnedOn[1] + (moduleConfig.external_notification.output_ms
+                                    ? moduleConfig.external_notification.output_ms
+                                    : EXT_NOTIFICATION_MODULE_OUTPUT_MS) < millis()) {
+                getExternal(1) ? setExternalOff(1) : setExternalOn(1);
+            }
+            if (externalTurnedOn[2] + (moduleConfig.external_notification.output_ms
+                                    ? moduleConfig.external_notification.output_ms
+                                    : EXT_NOTIFICATION_MODULE_OUTPUT_MS) < millis()) {
+                getExternal(2) ? setExternalOff(2) : setExternalOn(2);
+            }
         }
-    }
-    if (moduleConfig.external_notification.use_pwm)
-        return INT32_MAX; // we don't need this thread here...
-    else
+
+        // now let the PWM buzzer play
+#ifndef ARCH_PORTDUINO
+        if (moduleConfig.external_notification.use_pwm) {
+            if (rtttl::isPlaying()) {
+                rtttl::play();
+            } else if (nagCycleCutoff >= millis()) {
+                // start the song again if we have time left
+                rtttl::begin(config.device.buzzer_gpio, pwmRingtone);
+            }
+        }
+#endif        
         return 25;
+    }
 }
 
-void ExternalNotificationModule::setExternalOn()
+void ExternalNotificationModule::setExternalOn(uint8_t index)
 {
-    externalCurrentState = 1;
-    externalTurnedOn = millis();
+    externalCurrentState[index] = 1;
+    externalTurnedOn[index] = millis();
 
-    digitalWrite(output,
-                 (moduleConfig.external_notification.active ? true : false));
+    switch(index) {
+        case 1:
+            if(moduleConfig.external_notification.output_vibra)
+                digitalWrite(moduleConfig.external_notification.output_vibra, true);
+            break;
+        case 2:
+            if(moduleConfig.external_notification.output_buzzer)
+                digitalWrite(moduleConfig.external_notification.output_buzzer, true);
+            break;
+        default:
+            digitalWrite(output, (moduleConfig.external_notification.active ? true : false));
+            break;
+    }
 }
 
-void ExternalNotificationModule::setExternalOff()
+void ExternalNotificationModule::setExternalOff(uint8_t index)
 {
-    externalCurrentState = 0;
+    externalCurrentState[index] = 0;
+    externalTurnedOn[index] = millis();
 
-    digitalWrite(output,
-                 (moduleConfig.external_notification.active ? false : true));
+    switch(index) {
+        case 1:
+            if(moduleConfig.external_notification.output_vibra)
+                digitalWrite(moduleConfig.external_notification.output_vibra, false);
+            break;
+        case 2:
+            if(moduleConfig.external_notification.output_buzzer)
+                digitalWrite(moduleConfig.external_notification.output_buzzer, false);
+            break;
+        default:
+            digitalWrite(output, (moduleConfig.external_notification.active ? false : true));
+            break;
+    }
 }
 
-// --------
+bool ExternalNotificationModule::getExternal(uint8_t index)
+{
+    return externalCurrentState[index];
+}
+
+void ExternalNotificationModule::stopNow() {
+#ifndef ARCH_PORTDUINO    
+    rtttl::stop();
+#endif    
+    nagCycleCutoff = 1; // small value
+    setIntervalFromNow(0);
+}
 
 ExternalNotificationModule::ExternalNotificationModule()
     : SinglePortModule("ExternalNotificationModule", PortNum_TEXT_MESSAGE_APP), concurrency::OSThread(
@@ -121,13 +151,18 @@ ExternalNotificationModule::ExternalNotificationModule()
         without having to configure it from the PythonAPI or WebUI.
     */
 
-    // moduleConfig.external_notification.enabled = 1;
-    // moduleConfig.external_notification.alert_message = 1;
+    // moduleConfig.external_notification.enabled = true;
+    // moduleConfig.external_notification.alert_message = true;
+    // moduleConfig.external_notification.alert_message_buzzer = true;
+    // moduleConfig.external_notification.alert_message_vibra = true;
 
-    // moduleConfig.external_notification.active = 1;
+    // moduleConfig.external_notification.active = true;
     // moduleConfig.external_notification.alert_bell = 1;
     // moduleConfig.external_notification.output_ms = 1000;
-    // moduleConfig.external_notification.output = 13;
+    // moduleConfig.external_notification.output = 4; // RAK4631 IO4
+    // moduleConfig.external_notification.output_buzzer = 10; // RAK4631 IO6
+    // moduleConfig.external_notification.output_vibra = 28; // RAK4631 IO7
+    // moduleConfig.external_notification.nag_timeout = 300;
     
     if (moduleConfig.external_notification.enabled) {
 
@@ -137,19 +172,30 @@ ExternalNotificationModule::ExternalNotificationModule()
                         ? moduleConfig.external_notification.output
                         : EXT_NOTIFICATION_MODULE_OUTPUT;
 
-        if (!moduleConfig.external_notification.use_pwm) {
-            // Set the direction of a pin
-            DEBUG_MSG("Using Pin %i in digital mode\n", output);
-            pinMode(output, OUTPUT);
-            // Turn off the pin
-            setExternalOff();
-        } else {
-            config.device.buzzer_gpio = config.device.buzzer_gpio
-                                ? config.device.buzzer_gpio
-                                : PIN_BUZZER;
-                                
-            // in PWM Mode we force the buzzer pin if it is set
-            DEBUG_MSG("Using Pin %i in PWM mode\n", config.device.buzzer_gpio);
+        // Set the direction of a pin
+        DEBUG_MSG("Using Pin %i in digital mode\n", output);
+        pinMode(output, OUTPUT);
+        setExternalOff(0);
+        externalTurnedOn[0] = 0;
+        if(moduleConfig.external_notification.output_vibra) {
+            DEBUG_MSG("Using Pin %i for vibra motor\n", moduleConfig.external_notification.output_vibra);
+            pinMode(moduleConfig.external_notification.output_vibra, OUTPUT);
+            setExternalOff(1);
+            externalTurnedOn[1] = 0;
+        }
+        if(moduleConfig.external_notification.output_buzzer) {
+            if (!moduleConfig.external_notification.use_pwm) {
+                DEBUG_MSG("Using Pin %i for buzzer\n", moduleConfig.external_notification.output_buzzer);
+                pinMode(moduleConfig.external_notification.output_buzzer, OUTPUT);
+                setExternalOff(2);
+                externalTurnedOn[2] = 0;
+            } else {
+                config.device.buzzer_gpio = config.device.buzzer_gpio
+                    ? config.device.buzzer_gpio
+                    : PIN_BUZZER;
+                // in PWM Mode we force the buzzer pin if it is set
+                DEBUG_MSG("Using Pin %i in PWM mode\n", config.device.buzzer_gpio);
+            }
         }
     } else {
         DEBUG_MSG("External Notification Module Disabled\n");
@@ -163,30 +209,95 @@ ProcessMessage ExternalNotificationModule::handleReceived(const MeshPacket &mp)
 
         if (getFrom(&mp) != nodeDB.getNodeNum()) {
 
-            // TODO: This may be a problem if messages are sent in unicide, but I'm not sure if it will.
-            //   Need to know if and how this could be a problem.
+            // Check if the message contains a bell character. Don't do this loop for every pin, just once.
+            auto &p = mp.decoded;
+            bool containsBell = false;
+            for (int i = 0; i < p.payload.size; i++) {
+                if (p.payload.bytes[i] == ASCII_BELL) {
+                    containsBell = true;
+                }
+            }
+
             if (moduleConfig.external_notification.alert_bell) {
-                auto &p = mp.decoded;
-                DEBUG_MSG("externalNotificationModule - Notification Bell\n");
-                for (int i = 0; i < p.payload.size; i++) {
-                    if (p.payload.bytes[i] == ASCII_BELL) {
-                        if (!moduleConfig.external_notification.use_pwm) {
-                            setExternalOn();
-                        } else {
-                            playBeep();
-                        }
+                if (containsBell) {
+                    DEBUG_MSG("externalNotificationModule - Notification Bell\n");
+                    setExternalOn(0);
+                    if (moduleConfig.external_notification.nag_timeout) {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                    } else {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
+                    }
+                }
+            }
+
+            if (moduleConfig.external_notification.alert_bell_vibra) {
+                if (containsBell) {
+                    DEBUG_MSG("externalNotificationModule - Notification Bell (Vibra)\n");
+                    setExternalOn(1);
+                    if (moduleConfig.external_notification.nag_timeout) {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                    } else {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
+                    }
+                }
+            }
+
+            if (moduleConfig.external_notification.alert_bell_buzzer) {
+                if (containsBell) {
+                    DEBUG_MSG("externalNotificationModule - Notification Bell (Buzzer)\n");
+                    if (!moduleConfig.external_notification.use_pwm) {
+                        setExternalOn(2);
+                    } else {
+#ifndef ARCH_PORTDUINO
+                        rtttl::begin(config.device.buzzer_gpio, pwmRingtone);
+#endif
+                    }
+                    if (moduleConfig.external_notification.nag_timeout) {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                    } else {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
                     }
                 }
             }
 
             if (moduleConfig.external_notification.alert_message) {
                 DEBUG_MSG("externalNotificationModule - Notification Module\n");
-                if (!moduleConfig.external_notification.use_pwm) {
-                    setExternalOn();
+                setExternalOn(0);
+                if (moduleConfig.external_notification.nag_timeout) {
+                    nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
                 } else {
-                    playBeep();
+                    nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
                 }
             }
+
+            if (!moduleConfig.external_notification.use_pwm) {
+                if (moduleConfig.external_notification.alert_message_vibra) {
+                    DEBUG_MSG("externalNotificationModule - Notification Module (Vibra)\n");
+                    setExternalOn(1);
+                    if (moduleConfig.external_notification.nag_timeout) {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                    } else {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
+                    }
+                }
+
+                if (moduleConfig.external_notification.alert_message_buzzer) {
+                    DEBUG_MSG("externalNotificationModule - Notification Module (Buzzer)\n");
+                    if (!moduleConfig.external_notification.use_pwm) {
+                        setExternalOn(2);
+                    } else {
+#ifndef ARCH_PORTDUINO
+                        rtttl::begin(config.device.buzzer_gpio, pwmRingtone);
+#endif
+                    }
+                    if (moduleConfig.external_notification.nag_timeout) {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                    } else {
+                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
+                    }
+                }
+            }
+            setIntervalFromNow(0); // run once so we know if we should do something
         }
 
     } else {

src/modules/ExternalNotificationModule.h

@@ -3,6 +3,9 @@
 #include "SinglePortModule.h"
 #include "concurrency/OSThread.h"
 #include "configuration.h"
+#ifndef ARCH_PORTDUINO
+#include <NonBlockingRtttl.h>
+#endif
 #include <Arduino.h>
 #include <functional>
 
@@ -17,18 +20,23 @@ class ExternalNotificationModule : public SinglePortModule, private concurrency:
   public:
     ExternalNotificationModule();
 
-    void setExternalOn();
-    void setExternalOff();
-    void getExternal();
+    uint32_t nagCycleCutoff = UINT32_MAX;
+
+    void setExternalOn(uint8_t index = 0);
+    void setExternalOff(uint8_t index = 0);
+    bool getExternal(uint8_t index = 0);
+
+    void stopNow();
+
+    char pwmRingtone[Constants_DATA_PAYLOAD_LEN] = "a:d=8,o=5,b=125:4d#6,a#,2d#6,16p,g#,4a#,4d#.,p,16g,16a#,d#6,a#,f6,2d#6,16p,c#.6,16c6,16a#,g#.,2a#";
 
   protected:
-    // virtual MeshPacket *allocReply();
-
     /** Called to handle a particular incoming message
-
     @return ProcessMessage::STOP if you've guaranteed you've handled this message and no other handlers should be considered for it
     */
     virtual ProcessMessage handleReceived(const MeshPacket &mp) override;
 
     virtual int32_t runOnce() override;
 };
+
+extern ExternalNotificationModule *externalNotificationModule;

src/modules/Modules.cpp

@@ -11,6 +11,7 @@
 #include "modules/ReplyModule.h"
 #include "modules/RoutingModule.h"
 #include "modules/TextMessageModule.h"
+#include "modules/TraceRouteModule.h"
 #include "modules/WaypointModule.h"
 #if HAS_TELEMETRY
 #include "modules/Telemetry/DeviceTelemetry.h"
@@ -19,13 +20,11 @@
 #ifdef ARCH_ESP32
 #include "modules/esp32/RangeTestModule.h"
 #include "modules/esp32/StoreForwardModule.h"
-#ifdef USE_SX1280
 #include "modules/esp32/AudioModule.h"
 #endif
-#endif
 #if defined(ARCH_ESP32) || defined(ARCH_NRF52)
 #include "modules/ExternalNotificationModule.h"
-#if !defined(TTGO_T_ECHO)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52)) && !defined(TTGO_T_ECHO) && !defined(CONFIG_IDF_TARGET_ESP32S2)
 #include "modules/SerialModule.h"
 #endif
 #endif
@@ -42,6 +41,7 @@ void setupModules()
     positionModule = new PositionModule();
     waypointModule = new WaypointModule();
     textMessageModule = new TextMessageModule();
+    traceRouteModule = new TraceRouteModule();
     
     // Note: if the rest of meshtastic doesn't need to explicitly use your module, you do not need to assign the instance
     // to a global variable.
@@ -63,15 +63,13 @@ void setupModules()
     new DeviceTelemetryModule();
     new EnvironmentTelemetryModule();
 #endif
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52)) && !defined(TTGO_T_ECHO)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52)) && !defined(TTGO_T_ECHO) && !defined(CONFIG_IDF_TARGET_ESP32S2)
     new SerialModule();
 #endif
 #ifdef ARCH_ESP32
     // Only run on an esp32 based device.
-#ifdef USE_SX1280
-    new AudioModule();
-#endif
-    new ExternalNotificationModule();
+    audioModule = new AudioModule();
+    externalNotificationModule = new ExternalNotificationModule();
 
     storeForwardModule = new StoreForwardModule();
 

src/modules/NodeInfoModule.cpp

@@ -51,7 +51,7 @@ MeshPacket *NodeInfoModule::allocReply()
 }
 
 NodeInfoModule::NodeInfoModule()
-    : ProtobufModule("nodeinfo", PortNum_NODEINFO_APP, User_fields), concurrency::OSThread("NodeInfoModule")
+    : ProtobufModule("nodeinfo", PortNum_NODEINFO_APP, &User_msg), concurrency::OSThread("NodeInfoModule")
 {
     isPromiscuous = true; // We always want to update our nodedb, even if we are sniffing on others
     setIntervalFromNow(30 * 1000); // Send our initial owner announcement 30 seconds after we start (to give network time to setup)

src/modules/PositionModule.cpp

@@ -10,7 +10,7 @@
 PositionModule *positionModule;
 
 PositionModule::PositionModule()
-    : ProtobufModule("position", PortNum_POSITION_APP, Position_fields), concurrency::OSThread("PositionModule")
+    : ProtobufModule("position", PortNum_POSITION_APP, &Position_msg), concurrency::OSThread("PositionModule")
 {
     isPromiscuous = true;          // We always want to update our nodedb, even if we are sniffing on others
     setIntervalFromNow(60 * 1000); // Send our initial position 60 seconds after we start (to give GPS time to setup)

src/modules/RemoteHardwareModule.cpp

@@ -47,7 +47,7 @@ static uint64_t digitalReads(uint64_t mask)
 }
 
 RemoteHardwareModule::RemoteHardwareModule()
-    : ProtobufModule("remotehardware", PortNum_REMOTE_HARDWARE_APP, HardwareMessage_fields), concurrency::OSThread(
+    : ProtobufModule("remotehardware", PortNum_REMOTE_HARDWARE_APP, &HardwareMessage_msg), concurrency::OSThread(
                                                                                                  "remotehardware")
 {
 }