Fix - Add GeoChat To field to payloads and handle compression (#3199)

* WIP ATAK plugin message handling

* Log

* Update size and regen

* Rework protos and remove compression

* Track

* Altitude

* Protos

* Protos and formatting

* Add to column

* Fixes / updates

* Doh!

* S

* Refactoring and compression fixes

* Fix missing (to) from ATAK geochat

* Trunk

* Explicitly set has_to

* Fmt

* Protobufs

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -32,16 +32,24 @@ body:
       options:
         - Not Applicable
         - T-Beam
+        - T-Beam S3
         - T-Beam 0.7
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
+        - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/actions/setup-base/action.yml

@@ -16,6 +16,19 @@ runs:
       run: |
         sudo apt-get install -y cppcheck
 
+    - name: Install libbluetooth
+      shell: bash
+      run: |
+        sudo apt-get install -y libbluetooth-dev
+    - name: Install libgpiod
+      shell: bash
+      run: |
+        sudo apt-get install -y libgpiod-dev
+    - name: Install libyaml-cpp
+      shell: bash
+      run: |
+        sudo apt-get install -y libyaml-cpp-dev
+
     - name: Setup Python
       uses: actions/setup-python@v4
       with:

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -40,11 +40,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,59 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_raspbian.yml

@@ -0,0 +1,45 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_aarch64
+            bin/config-dist.yaml

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -23,9 +26,9 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2-1-1.6
+          - board: tlora-v2-1-1_6
           - board: tbeam
-          - board: heltec-v2.1
+          - board: heltec-v2_1
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
@@ -33,6 +36,9 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          #- board: rak11310
 
     runs-on: ubuntu-latest
     steps:
@@ -42,7 +48,8 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        if: ${{ github.event_name != 'workflow_dispatch' }}
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -56,38 +63,58 @@ jobs:
           - board: tlora-v2
           - board: tlora-v1
           - board: tlora_v1_3
-          - board: tlora-v2-1-1.6
-          - board: tlora-v2-1-1.8
+          - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_6-tcxo
+          - board: tlora-v2-1-1_8
           - board: tbeam
+          - board: heltec-ht62-esp32c3-sx1262
           - board: heltec-v1
-          - board: heltec-v2.0
-          - board: heltec-v2.1
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: tbeam0.7
+          - board: heltec-v2_0
+          - board: heltec-v2_1
+          - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+          - board: nano-g1-explorer
+          - board: chatter2
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-s3:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: heltec-v3
+          - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-paper
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
-    uses: ./.github/workflows/build_esp32.yml
+          - board: t-watch-s3
+          - board: t-deck
+          - board: picomputer-s3
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
   build-nrf52:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
@@ -95,14 +122,25 @@ jobs:
   build-rpi2040:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: pico
+          - board: picow
+          - board: rak11310
+          - board: senselora_rp2040
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
 
+  build-raspbian:
+    strategy:
+      fail-fast: false
+      max-parallel: 1
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml
+
   build-native:
     runs-on: ubuntu-latest
     steps:
@@ -137,12 +175,14 @@ jobs:
             release/device-*.bat
 
       - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
       - name: Docker build and push tagged versions
@@ -155,7 +195,7 @@ jobs:
           tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
 
       - name: Docker build and push
-        if: github.ref == 'refs/heads/master'
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/build-push-action@v3
         with:
           context: .
@@ -174,8 +214,20 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
   gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
+    needs:
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-nrf52,
+        build-raspbian,
+        build-native,
+        build-rpi2040,
+        package-raspbian,
+      ]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -187,12 +239,15 @@ jobs:
         with:
           path: ./
 
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase_v2.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_aarch64 ./firmware-raspbian-*/bin/config-dist.yaml
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -204,6 +259,8 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_arm64
+            ./config-dist.yaml
           retention-days: 90
 
       - uses: actions/download-artifact@v3
@@ -231,15 +288,15 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
           artifacts-repo: meshtastic/artifacts
           artifacts-branch: device
-          artifacts-dir: pr
           artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
@@ -264,6 +321,13 @@ jobs:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
 
+      - uses: actions/download-artifact@v3
+        with:
+          name: artifact-deb
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -290,7 +354,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
@@ -317,6 +381,16 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - name: Add raspbian .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py

.github/workflows/nightly.yml

@@ -14,6 +14,6 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}

.github/workflows/package_raspbian.yml

@@ -0,0 +1,62 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact-deb
+          path: |
+            ./*.deb

.github/workflows/trunk-check.yml

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1

.gitignore

@@ -30,3 +30,4 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
+/compile_commands.json

.trunk/.gitignore

@@ -2,6 +2,7 @@
 *logs
 *actions
 *notifications
+*tools
 plugins
 user_trunk.yaml
 user.yaml

.trunk/configs/.flake8

@@ -0,0 +1,3 @@
+# Autoformatter friendly flake8 config (all formatting rules disabled)
+[flake8]
+extend-ignore = D1, D2, E1, E2, E3, E501, W1, W2, W3, W5

.trunk/configs/.isort.cfg

@@ -0,0 +1,2 @@
+[settings]
+profile=black

.trunk/configs/.shellcheckrc

@@ -1,7 +1,10 @@
 enable=all
 source-path=SCRIPTDIR
 disable=SC2154
+disable=SC2248
+disable=SC2250
 
 # If you're having issues with shellcheck following source, disable the errors via:
 # disable=SC1090
 # disable=SC1091
+# 

.trunk/configs/.yamllint.yaml

@@ -0,0 +1,10 @@
+rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed: ["{|}"]
+  empty-values:
+    forbid-in-block-mappings: false
+    forbid-in-flow-mappings: true
+  key-duplicates: {}
+  octal-values:
+    forbid-implicit-octal: true

.trunk/configs/ruff.toml

@@ -0,0 +1,5 @@
+# Generic, formatter-friendly config.
+select = ["B", "D3", "D4", "E", "F"]
+
+# Never enforce `E501` (line length violations). This should be handled by formatters.
+ignore = ["E501"]

.trunk/trunk.yaml

@@ -1,33 +1,43 @@
 version: 0.1
 cli:
-  version: 1.3.1
+  version: 1.17.2
 plugins:
   sources:
     - id: trunk
-      ref: v0.0.8
+      ref: v1.3.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - git-diff-check
-    - gitleaks@8.15.2
-    - clang-format@14.0.0
-    - prettier@2.8.3
-  disabled:
-    - shellcheck@0.9.0
-    - shfmt@3.5.0
-    - oxipng@8.0.0
-    - actionlint@1.6.22
-    - markdownlint@0.33.0
+    - bandit@1.7.5
+    - checkov@3.1.9
+    - terrascan@1.18.5
+    - trivy@0.47.0
+    #- trufflehog@3.63.2-rc0
+    - taplo@0.8.1
+    - ruff@0.1.6
+    - isort@5.12.0
+    - markdownlint@0.37.0
+    - oxipng@9.0.0
+    - svgo@3.0.5
+    - actionlint@1.6.26
+    - flake8@6.1.0
     - hadolint@2.12.0
-    - svgo@3.0.2
+    - shfmt@3.6.0
+    - shellcheck@0.9.0
+    - black@23.9.1
+    - git-diff-check
+    - gitleaks@8.18.1
+    - clang-format@16.0.3
+    - prettier@3.1.0
 runtimes:
   enabled:
-    - go@1.18.3
+    - python@3.10.8
+    - go@1.21.0
     - node@18.12.1
 actions:
   disabled:
     - trunk-announce
-    - trunk-check-pre-push
-    - trunk-fmt-pre-commit
   enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
     - trunk-upgrade-available

.vscode/extensions.json

@@ -6,4 +6,4 @@
         "platformio.platformio-ide",
         "trunk.io"
     ],
-}
+}

.vscode/settings.json

@@ -1,4 +1,5 @@
 {
   "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true
 }

Dockerfile

@@ -12,7 +12,7 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 # Install build deps
 USER root
 RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
+	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev
 
 # create a non-priveleged user & group
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
@@ -27,15 +27,15 @@ RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/
 	source ~/.platformio/penv/bin/activate && \
 	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc
+FROM frolvlad/alpine-glibc:glibc-2.31
 
 RUN apk --update add --no-cache g++ shadow && \
 	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
 
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
+COPY --from=builder /tmp/firmware/release/meshtasticd_linux_x86_64 /home/mesh/
 
 USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+CMD sh -cx "./meshtasticd_linux_x86_64 --hwid '${HWID:-$RANDOM}'"
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -10,8 +10,8 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 

arch/esp32/esp32.ini

@@ -1,12 +1,15 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
+
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
+
 board_build.filesystem = littlefs
 
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@@ -25,17 +28,23 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  ;-DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
+  h2zero/NimBLE-Arduino@^1.4.1
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 
 lib_ignore = 
   segger_rtt
@@ -51,4 +60,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -0,0 +1,5 @@
+[esp32c3_base]
+extends = esp32_base
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -1,47 +1,16 @@
 [esp32s2_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+extends = esp32_base
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
-upload_speed = 961200
+  ${esp32_base.build_src_filter} -<nimble/>
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
 
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
-  -DDEBUG_HEAP
   
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
 lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
 

arch/esp32/esp32s3.ini

@@ -1,47 +1,5 @@
 [esp32s3_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
 

arch/nrf52/nrf52.ini

@@ -1,18 +1,20 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.4.0
-
+platform = platformio/nordicnrf52@^10.1.0
 extends = arduino_base
+
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
   -Isrc/platform/nrf52
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+
 lib_ignore =
-  BluetoothOTA
-  
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832  
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,14 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
+
 build_flags = ${nrf52_base.build_flags} 
+
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-

arch/portduino/portduino.ini

@@ -1,7 +1,8 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#a28dd5a9ccd5c48a9bede46037855ff83915d74b
 framework = arduino
+
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -9,13 +10,27 @@ build_src_filter =
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
   -<platform/rp2040>
+  -<mesh/wifi/>
   -<mesh/http/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
+
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino
+  lovyan03/LovyanGFX@^1.1.12
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -1,9 +1,9 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#20c7dbfcfe6677c5305fa28ecf5e3870321cb157
-platform_packages = 
-  earlephilhower/toolchain-rp2040-earlephilhower@^5.100300.221223
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#612de5399d68b359053f1307ed223d400aea975c
 extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.6.2
+
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
@@ -12,10 +12,12 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/>
+
 lib_ignore =
   BluetoothOTA
+
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  rweather/Crypto

arch/stm32/stm32wl5e.ini

@@ -1,18 +1,28 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
+
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
-  -DHAL_SUBGHZ_MODULE_ENABLED
-#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
-#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
 lib_deps =
   ${env.lib_deps}
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-lib_ignore = 
-  mathertel/OneButton@^2.0.3
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  mathertel/OneButton

bin/build-esp32.sh

@@ -34,7 +34,7 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment tbeam -t buildfs
-cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -2,8 +2,8 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
 
 OUTDIR=release/
 
@@ -13,11 +13,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
-
+platformio pkg update
 pio run --environment native
-cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
-
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(arch)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
-

bin/check-all.sh

@@ -4,23 +4,23 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
+VERSION=$(bin/buildinfo.py long)
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 if [[ $# -gt 0 ]]; then
-    # can override which environment by passing arg
-    BOARDS="$@"
+	# can override which environment by passing arg
+	BOARDS="$@"
 else
-    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
 fi
 
 echo "BOARDS:${BOARDS}"
 
 CHECK=""
 for BOARD in $BOARDS; do
-     CHECK="${CHECK} -e ${BOARD}"
+	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -0,0 +1,119 @@
+### Define your devices here using Broadcom pin numbering
+### Uncomment the block that corresponds to your hardware
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+#  Module: sx1280  # SX1280
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+### Set gpio chip to use in /dev/. Defaults to 0.
+### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
+### Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+### Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0
+
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
+### Set up SPI displays here. Note that I2C displays are generally auto-detected.
+
+Display:
+
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+### Adafruit PiTFT 2.8 TFT+Touchscreen
+#  Panel: ILI9341
+#  CS: 8
+#  DC: 25
+#  Backlight: 2
+#  Width: 320
+#  Height: 240
+
+Touchscreen:
+#  Module: STMPE610
+#  CS: 7
+#  IRQ: 24
+
+#  Module: XPT2046
+#  CS: 7
+#  IRQ: 17
+
+### Configure device for direct keyboard input
+
+Input:
+#  KeyboardDevice: /dev/input/event0
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error

bin/device-install.bat

@@ -30,7 +30,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
-	%PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+    
+    @REM Account for S3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    )
     for %%f in (littlefs-*.bin) do (
         %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )

bin/device-install.sh

@@ -49,7 +49,12 @@ if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
-    "$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	# Account for S3 board's different OTA partition
+	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
+		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	else
+	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin
+	fi
 	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
 
 else

bin/exception_decoder.py

@@ -11,19 +11,22 @@ Meshtastic notes:
 * version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
   which adds in ESP32 Backtrace decoding.
 * this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+* also updated the toolchain name, which will be set according to the platform
 
 To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
 $ bin/exception_decoder.py backtrace.txt
+For a platform other than ESP32, use the -p option, e.g.:
+$ bin/exception_decoder.py -p ESP32S3 backtrace.txt
+To specify a specific .elf file, use the -e option, e.g.:
+$ bin/exception_decoder.py -e firmware.elf backtrace.txt
 """
 
 import argparse
+import os
 import re
 import subprocess
-from collections import namedtuple
-
 import sys
-
-import os
+from collections import namedtuple
 
 EXCEPTIONS = [
     "Illegal instruction",
@@ -55,24 +58,39 @@ EXCEPTIONS = [
     "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
     "reserved",
     "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
-    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores",
 ]
 
 PLATFORMS = {
-    "ESP8266": "lx106",
-    "ESP32": "esp32"
+    "ESP8266": "xtensa-lx106",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
+}
+TOOLS = {
+    "ESP8266": "xtensa",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
 }
 
-BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+BACKTRACE_REGEX = re.compile(
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+)
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
-COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
-                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+COUNTER_REGEX = re.compile(
+    "^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) "
+    "excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$"
+)
 CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
-POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
-STACK_BEGIN = '>>>stack>>>'
-STACK_END = '<<<stack<<<'
+POINTER_REGEX = re.compile(
+    "^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$"
+)
+STACK_BEGIN = ">>>stack>>>"
+STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+)
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
 
@@ -96,15 +114,18 @@ class ExceptionDataParser(object):
         self.stack = []
 
     def _parse_backtrace(self, line):
-        if line.startswith('Backtrace:'):
-            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+        if line.startswith("Backtrace:"):
+            self.stack = [
+                StackLine(offset=0, content=(addr,))
+                for addr in BACKTRACE_REGEX.findall(line)
+            ]
             return None
         return self._parse_backtrace
 
     def _parse_exception(self, line):
         match = EXCEPTION_REGEX.match(line)
         if match is not None:
-            self.exception = int(match.group('exc'))
+            self.exception = int(match.group("exc"))
             return self._parse_counters
         return self._parse_exception
 
@@ -144,14 +165,22 @@ class ExceptionDataParser(object):
         if line != STACK_END:
             match = STACK_REGEX.match(line)
             if match is not None:
-                self.stack.append(StackLine(offset=match.group("off"),
-                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
-                                                     match.group("c4"))))
+                self.stack.append(
+                    StackLine(
+                        offset=match.group("off"),
+                        content=(
+                            match.group("c1"),
+                            match.group("c2"),
+                            match.group("c3"),
+                            match.group("c4"),
+                        ),
+                    )
+                )
             return self._parse_stack_line
         return None
 
     def parse_file(self, file, platform, stack_only=False):
-        if platform == 'ESP32':
+        if platform != "ESP8266":
             func = self._parse_backtrace
         else:
             func = self._parse_exception
@@ -175,7 +204,9 @@ class AddressResolver(object):
         self._address_map = {}
 
     def _lookup(self, addresses):
-        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [
+            addr for addr in addresses if addr is not None
+        ]
 
         if sys.version_info[0] < 3:
             output = subprocess.check_output(cmd)
@@ -190,19 +221,27 @@ class AddressResolver(object):
             match = line_regex.match(line)
 
             if match is None:
-                if last is not None and line.startswith('(inlined by)'):
-                    line = line [12:].strip()
-                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                if last is not None and line.startswith("(inlined by)"):
+                    line = line[12:].strip()
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
-            if match.group("result") == '?? ??:0':
+            if match.group("result") == "?? ??:0":
                 continue
 
             self._address_map[match.group("addr")] = match.group("result")
             last = match.group("addr")
 
     def fill(self, parser):
-        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        addresses = [
+            parser.epc1,
+            parser.epc2,
+            parser.epc3,
+            parser.excvaddr,
+            parser.sp,
+            parser.end,
+            parser.offset,
+        ]
         for line in parser.stack:
             addresses.extend(line.content)
 
@@ -257,8 +296,10 @@ def print_stack(lines, resolver):
 
 
 def print_result(parser, resolver, platform, full=True, stack_only=False):
-    if platform == 'ESP8266' and not stack_only:
-        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+    if platform == "ESP8266" and not stack_only:
+        print(
+            "Exception: {} ({})".format(parser.exception, EXCEPTIONS[parser.exception])
+        )
 
         print("")
         print_addr("epc1", parser.epc1, resolver)
@@ -285,15 +326,33 @@ def print_result(parser, resolver, platform, full=True, stack_only=False):
 def parse_args():
     parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")
 
-    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
-                        default="ESP32")
-    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
-                        default="~/.platformio/packages/toolchain-xtensa32/")
-    parser.add_argument("-e", "--elf", help="path to elf file",
-                        default=".pio/build/esp32/firmware.elf")
-    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
-    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
-    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+    parser.add_argument(
+        "-p",
+        "--platform",
+        help="The platform to decode from",
+        choices=PLATFORMS.keys(),
+        default="ESP32",
+    )
+    parser.add_argument(
+        "-t",
+        "--tool",
+        help="Path to the toolchain (without specific platform)",
+        default="~/.platformio/packages/toolchain-",
+    )
+    parser.add_argument(
+        "-e", "--elf", help="path to elf file", default=".pio/build/tbeam/firmware.elf"
+    )
+    parser.add_argument(
+        "-f", "--full", help="Print full stack dump", action="store_true"
+    )
+    parser.add_argument(
+        "-s", "--stack_only", help="Decode only a stractrace", action="store_true"
+    )
+    parser.add_argument(
+        "file",
+        help="The file to read the exception data from ('-' for STDIN)",
+        default="-",
+    )
 
     return parser.parse_args()
 
@@ -309,10 +368,12 @@ if __name__ == "__main__":
             sys.exit(1)
         file = open(args.file, "r")
 
-    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
-                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
-    if os.name == 'nt':
-        addr2line += '.exe'
+    addr2line = os.path.join(
+        os.path.abspath(os.path.expanduser(args.tool + TOOLS[args.platform])),
+        "bin/" + PLATFORMS[args.platform] + "-elf-addr2line",
+    )
+    if os.name == "nt":
+        addr2line += ".exe"
     if not os.path.exists(addr2line):
         print("ERROR: addr2line not found (" + addr2line + ")")
 

bin/generate_ci_matrix.py

@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+"""Generate the CI matrix"""
+
+import configparser
+import json
+import os
+import sys
+
+rootdir = "variants/"
+
+options = sys.argv[1:]
+
+outlist = []
+
+if len(options) < 1:
+    print(json.dumps(outlist))
+    exit()
+
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if config[config[c].name]["extends"] == options[0] + "_base":
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+
+print(json.dumps(outlist))

bin/meshtasticd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Meshtastic Native Daemon
+After=network-online.target
+
+[Service]
+User=root
+Group=root
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target

bin/native-install.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp "release/meshtasticd_linux_$(arch)" /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service

bin/regen-protos.bat

@@ -1,5 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
-
-@REM cd ../src/mesh/generated/meshtastic
-@REM sed -i 's/#include "meshtastic/#include "./g' *
-@REM sed -i 's/meshtastic_//g' *
+cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -8,7 +8,7 @@ echo "prebuilt binaries for your computer into nanopb-0.4.7"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
 
 # cd ../src/mesh/generated/meshtastic
 # sed -i 's/#include "meshtastic/#include "./g' -- *

boards/bpi_picow_esp32_s3.json

@@ -0,0 +1,36 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "bpi_picow_esp32_s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BPI-PicoW-S3 (8 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.banana-pi.org/BPI-PicoW-S3",
+  "vendor": "BPI"
+}

boards/generic_wl5e.json

@@ -20,7 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": ["cmsis-dap"]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/my-esp32s3-diy-oled.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my-esp32s3-diy-oled"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/my_esp32s3_diy_eink.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my_esp32s3_diy_eink"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/t-deck.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -7,7 +7,11 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "t-echo",

boards/t-watch-s3.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-s3",
+  "vendor": "LilyGo"
+}

boards/tbeam-s3-core.json

@@ -15,7 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tbeam-s3-core"
   },

boards/tlora-t3s3-v1.json

@@ -9,12 +9,13 @@
       "-DARDUINO_USB_CDC_ON_BOOT=1",
       "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

boards/xiao_ble_sense.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

monitor/filter_c3_exception_decoder.py

@@ -0,0 +1,155 @@
+# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import re
+import subprocess
+import sys
+
+from platformio.project.exception import PlatformioException
+from platformio.public import (
+    DeviceMonitorFilterBase,
+    load_build_metadata,
+)
+
+# By design, __init__ is called inside miniterm and we can't pass context to it.
+# pylint: disable=attribute-defined-outside-init
+
+IS_WINDOWS = sys.platform.startswith("win")
+
+
+class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
+    NAME = "esp32_c3_exception_decoder"
+
+    PCADDR_PATTERN = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
+
+    def __call__(self):
+        self.buffer = ""
+        self.pcaddr_re = self.PCADDR_PATTERN
+
+        self.firmware_path = None
+        self.addr2line_path = None
+        self.enabled = self.setup_paths()
+
+        if self.config.get("env:" + self.environment, "build_type") != "debug":
+            print(
+                """
+Please build project in debug configuration to get more details about an exception.
+See https://docs.platformio.org/page/projectconf/build_configurations.html
+
+"""
+            )
+
+        return self
+
+    def setup_paths(self):
+        self.project_dir = os.path.abspath(self.project_dir)
+        try:
+            data = load_build_metadata(self.project_dir, self.environment)
+            self.firmware_path = data["prog_path"]
+            if not os.path.isfile(self.firmware_path):
+                sys.stderr.write(
+                    "%s: disabling, firmware at %s does not exist, rebuild the project?\n"
+                    % (self.__class__.__name__, self.firmware_path)
+                )
+                return False
+
+            if self.addr2line_path is None:
+                cc_path = data.get("cc_path", "")
+                if "-gcc" in cc_path:
+                    self.addr2line_path = cc_path.replace("-gcc", "-addr2line")
+                else:
+                    sys.stderr.write(
+                        "%s: disabling, failed to find addr2line.\n"
+                        % self.__class__.__name__
+                    )
+                    return False
+                
+            if not os.path.isfile(self.addr2line_path):
+                sys.stderr.write(
+                    "%s: disabling, addr2line at %s does not exist\n"
+                    % (self.__class__.__name__, self.addr2line_path)
+                )
+                return False
+                
+            return True
+        except PlatformioException as e:
+            sys.stderr.write(
+                "%s: disabling, exception while looking for addr2line: %s\n"
+                % (self.__class__.__name__, e)
+            )
+            return False
+
+    def rx(self, text):
+        if not self.enabled:
+            return text
+
+        last = 0
+        while True:
+            idx = text.find("\n", last)
+            if idx == -1:
+                if len(self.buffer) < 4096:
+                    self.buffer += text[last:]
+                break
+
+            line = text[last:idx]
+            if self.buffer:
+                line = self.buffer + line
+                self.buffer = ""
+            last = idx + 1
+
+            # Output each trace on a separate line below ours
+            # Logic identical to https://github.com/espressif/esp-idf/blob/master/tools/idf_monitor_base/logger.py#L131
+            for m in re.finditer(self.pcaddr_re, line):
+                if m is None:
+                    continue
+
+                trace = self.get_backtrace(m)
+                if len(trace) != "":
+                    text = text[: last] + trace + text[last :]
+                    last += len(trace)
+
+        return text
+
+    def get_backtrace(self, match):
+        trace = "\n"
+        enc = "mbcs" if IS_WINDOWS else "utf-8"
+        args = [self.addr2line_path, u"-fipC", u"-e", self.firmware_path]
+        try:
+            addr = match.group()
+            output = (
+                subprocess.check_output(args + [addr])
+                .decode(enc)
+                .strip()
+            )
+            output = output.replace(
+                "\n", "\n     "
+            )  # newlines happen with inlined methods
+            output = self.strip_project_dir(output)
+            # Output the trace in yellow color so that it is easier to spot
+            trace += "\033[33m=> %s: %s\033[0m\n" % (addr, output)
+        except subprocess.CalledProcessError as e:
+            sys.stderr.write(
+                "%s: failed to call %s: %s\n"
+                % (self.__class__.__name__, self.addr2line_path, e)
+            )
+        return trace
+
+    def strip_project_dir(self, trace):
+        while True:
+            idx = trace.find(self.project_dir)
+            if idx == -1:
+                break
+            trace = trace[:idx] + trace[idx + len(self.project_dir) + 1 :]
+        return trace

platformio.ini

@@ -2,17 +2,21 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-;default_envs = tbeam
+default_envs = tbeam
 ;default_envs = pico
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
-;default_envs = heltec-v2.0
-;default_envs = heltec-v2.1
+;default_envs = heltec-v2_0
+;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
+;default_envs = chatter2
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1.6
+;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-v2-1-1_6-tcxo
+;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = nrf52840dk-geeksville
@@ -20,17 +24,19 @@
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-diy-v1_1
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+;default_envs = rak10701
+;default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
-extra_scripts = bin/platformio-custom.py 
+extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
@@ -38,8 +44,8 @@ extra_scripts = bin/platformio-custom.py
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format 
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
+  -Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
@@ -47,6 +53,7 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_NRF24
   -DRADIOLIB_EXCLUDE_RF69
   -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
   -DRADIOLIB_EXCLUDE_SI443X
   -DRADIOLIB_EXCLUDE_RFM2X
   -DRADIOLIB_EXCLUDE_AFSK
@@ -54,19 +61,24 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#da1ede4dfcd91074283b029080759fd744120909 ; ESP8266_SSD1306 
-  mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
+  jgromes/RadioLib@^6.4.0
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
+  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
+  https://github.com/meshtastic/TinyGPSPlus.git#2044b2c51e91ab4cd8cc93b15e40658cd808dd06
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
-  nanopb/Nanopb@^0.4.6
+  nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
-;  jgromes/RadioLib@^5.5.1
-  https://github.com/jgromes/RadioLib.git#1afa947030c5637f71f6563bc22aa75032e53a57
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -81,31 +93,38 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
+  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
-  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#52b5282639d08a8cbd4b748363089eed6102dc76
+  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
-build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
+build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
-; Common libs for communicating over TCP/IP networks such as MQTT 
+; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
   arduino-libraries/NTPClient@^3.1.0
+  arcao/Syslog@^2.0.0
 
-; Common libs for environmental measurements in telemetry module 
+; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.4
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BME680 Library@^2.0.1
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
+  https://github.com/KodinLanewave/INA3221@^1.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
+  adafruit/Adafruit MPU6050@^2.2.4
+  adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/BMA423_Library@^0.0.1

src/AccelerometerThread.h

@@ -0,0 +1,174 @@
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <Wire.h>
+#include <bma.h>
+
+BMA423 bmaSensor;
+bool BMA_IRQ = false;
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+namespace concurrency
+{
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+
+        acceleremoter_type = type;
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            Acfg cfg;
+            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
+            cfg.range = BMA4_ACCEL_RANGE_2G;
+            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
+            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
+            bmaSensor.setAccelConfig(cfg);
+            bmaSensor.enableAccel();
+
+            struct bma4_int_pin_config pin_config;
+            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
+            pin_config.lvl = BMA4_ACTIVE_HIGH;
+            pin_config.od = BMA4_PUSH_PULL;
+            pin_config.output_en = BMA4_OUTPUT_ENABLE;
+            pin_config.input_en = BMA4_INPUT_DISABLE;
+            // The correct trigger interrupt needs to be configured as needed
+            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+            struct bma423_axes_remap remap_data;
+            remap_data.x_axis = 0;
+            remap_data.x_axis_sign = 1;
+            remap_data.y_axis = 1;
+            remap_data.y_axis_sign = 0;
+            remap_data.z_axis = 2;
+            remap_data.z_axis_sign = 1;
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setRemapAxes(&remap_data);
+            // sensor.enableFeature(BMA423_STEP_CNTR, true);
+            bmaSensor.enableFeature(BMA423_TILT, true);
+            bmaSensor.enableFeature(BMA423_WAKEUP, true);
+            // sensor.resetStepCounter();
+
+            // Turn on feature interrupt
+            bmaSensor.enableStepCountInterrupt();
+            bmaSensor.enableTiltInterrupt();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupInterrupt();
+        }
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+                wakeScreen();
+                return 500;
+            }
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+};
+
+} // namespace concurrency

src/AmbientLightingThread.h

@@ -0,0 +1,75 @@
+#include "configuration.h"
+
+#ifdef HAS_NCP5623
+#include <graphics/RAKled.h>
+NCP5623 rgb;
+#endif
+
+namespace concurrency
+{
+class AmbientLightingThread : public concurrency::OSThread
+{
+  public:
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    {
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
+        // // Default to a color based on our node number
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
+#ifdef HAS_NCP5623
+        _type = type;
+        if (_type == ScanI2C::DeviceType::NONE) {
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            disable();
+            return;
+        }
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            disable();
+            return;
+        }
+        LOG_DEBUG("AmbientLightingThread initializing\n");
+        if (_type == ScanI2C::NCP5623) {
+            rgb.begin();
+            setLighting();
+        }
+#endif
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+            setLighting();
+            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+        } else {
+            return disable();
+        }
+#else
+        return disable();
+#endif
+    }
+
+  private:
+    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+
+    void setLighting()
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+        rgb.setRed(moduleConfig.ambient_lighting.red);
+        rgb.setGreen(moduleConfig.ambient_lighting.green);
+        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+    }
+};
+
+} // namespace concurrency

src/AudioThread.h

@@ -0,0 +1,77 @@
+#pragma once
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "sleep.h"
+
+#ifdef HAS_I2S
+#include <AudioFileSourcePROGMEM.h>
+#include <AudioGeneratorRTTTL.h>
+#include <AudioOutputI2S.h>
+#include <ESP8266SAM.h>
+
+#define AUDIO_THREAD_INTERVAL_MS 100
+
+class AudioThread : public concurrency::OSThread
+{
+  public:
+    AudioThread() : OSThread("AudioThread") { initOutput(); }
+
+    void beginRttl(const void *data, uint32_t len)
+    {
+        setCPUFast(true);
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
+    }
+
+    bool isPlaying()
+    {
+        if (i2sRtttl != nullptr) {
+            return i2sRtttl->isRunning() && i2sRtttl->loop();
+        }
+        return false;
+    }
+
+    void stop()
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
+        }
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
+
+        setCPUFast(false);
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        // if (i2sRtttl != nullptr && i2sRtttl->isRunning()) {
+        //     i2sRtttl->loop();
+        // }
+        return AUDIO_THREAD_INTERVAL_MS;
+    }
+
+  private:
+    void initOutput()
+    {
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetGain(0.2);
+    };
+
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut;
+
+    AudioFileSourcePROGMEM *rtttlFile;
+};
+
+#endif

src/BluetoothCommon.h

@@ -17,4 +17,14 @@
 extern const uint8_t MESH_SERVICE_UUID_16[], TORADIO_UUID_16[16u], FROMRADIO_UUID_16[], FROMNUM_UUID_16[];
 
 /// Given a level between 0-100, update the BLE attribute
-void updateBatteryLevel(uint8_t level);
+void updateBatteryLevel(uint8_t level);
+
+class BluetoothApi
+{
+  public:
+    virtual void setup();
+    virtual void shutdown();
+    virtual void clearBonds();
+    virtual bool isConnected();
+    virtual int getRssi() = 0;
+};

src/ButtonThread.h

@@ -4,6 +4,8 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "main.h"
+#include "modules/ExternalNotificationModule.h"
 #include "power.h"
 #include <OneButton.h>
 
@@ -35,6 +37,9 @@ class ButtonThread : public concurrency::OSThread
 #endif
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
+#endif
+#if defined(ARCH_PORTDUINO)
+    OneButton userButton;
 #endif
     static bool shutdown_on_long_stop;
 
@@ -44,20 +49,42 @@ class ButtonThread : public concurrency::OSThread
     // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
     ButtonThread() : OSThread("Button")
     {
-#ifdef BUTTON_PIN
-        userButton = OneButton(BUTTON_PIN, true, true);
+#if defined(ARCH_PORTDUINO) || defined(BUTTON_PIN)
+#if defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            userButton = OneButton(settingsMap[user], true, true);
+#elif defined(BUTTON_PIN)
+        int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
+        userButton = OneButton(pin, true, true);
+#endif
+
 #ifdef INPUT_PULLUP_SENSE
         // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
+        pinMode(pin, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
-        userButton.setClickTicks(300);
+        userButton.setClickMs(400);
+        userButton.setPressMs(1000);
+        userButton.setDebounceMs(10);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
         userButton.attachLongPressStart(userButtonPressedLongStart);
         userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN, FALLING);
+#if defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            wakeOnIrq(settingsMap[user], FALLING);
+#else
+        static OneButton *pBtn = &userButton; // only one instance of ButtonThread is created, so static is safe
+        attachInterrupt(
+            pin,
+            []() {
+                BaseType_t higherWake = 0;
+                mainDelay.interruptFromISR(&higherWake);
+                pBtn->tick();
+            },
+            CHANGE);
+#endif
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
@@ -86,9 +113,14 @@ class ButtonThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN)
         userButton.tick();
         canSleep &= userButton.isIdle();
+#elif defined(ARCH_PORTDUINO)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+            userButton.tick();
+            canSleep &= userButton.isIdle();
+        }
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt.tick();
@@ -98,10 +130,10 @@ class ButtonThread : public concurrency::OSThread
         userButtonTouch.tick();
         canSleep &= userButtonTouch.isIdle();
 #endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
+        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
         // else LOG_DEBUG("sleep ok\n");
 
-        return 5;
+        return 50;
     }
 
   private:
@@ -115,7 +147,17 @@ class ButtonThread : public concurrency::OSThread
     {
         // LOG_DEBUG("press!\n");
 #ifdef BUTTON_PIN
-        if ((BUTTON_PIN != moduleConfig.canned_message.inputbroker_pin_press) || !moduleConfig.canned_message.enabled) {
+        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+             moduleConfig.canned_message.inputbroker_pin_press) ||
+            !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+            !moduleConfig.canned_message.enabled) {
+            powerFSM.trigger(EVENT_PRESS);
+        }
+#endif
+#if defined(ARCH_PORTDUINO)
+        if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+            !moduleConfig.canned_message.enabled) {
             powerFSM.trigger(EVENT_PRESS);
         }
 #endif
@@ -123,17 +165,9 @@ class ButtonThread : public concurrency::OSThread
     static void userButtonPressedLong()
     {
         // LOG_DEBUG("Long press!\n");
-#ifdef ARCH_ESP32
-        screen->adjustBrightness();
-#endif
         // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
-#ifdef HAS_PMU
-            if (pmu_found == true) {
-                setLed(false);
-                power->shutdown();
-            }
-#elif defined(ARCH_NRF52)
+        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
             // Do actual shutdown when button released, otherwise the button release
             // may wake the board immediatedly.
             if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
@@ -163,25 +197,26 @@ class ButtonThread : public concurrency::OSThread
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
         screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
+        service.refreshLocalMeshNode();
         service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
     static void userButtonMultiPressed()
     {
-#if defined(GPS_POWER_TOGGLE)
-        if (config.position.gps_enabled) {
-            LOG_DEBUG("Flag set to false for gps power\n");
-        } else {
-            LOG_DEBUG("Flag set to true to restore power\n");
+        if (!config.device.disable_triple_click && (gps != nullptr)) {
+            gps->toggleGpsMode();
+            screen->forceDisplay();
         }
-        config.position.gps_enabled = !(config.position.gps_enabled);
-        doGPSpowersave(config.position.gps_enabled);
-#endif
     }
 
     static void userButtonPressedLongStart()
     {
+#ifdef T_DECK
+        // False positive long-press triggered on T-Deck with i2s audio, so short circuit
+        if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
+            return;
+        }
+#endif
         if (millis() > 30 * 1000) {
             LOG_DEBUG("Long press start!\n");
             longPressTime = millis();
@@ -202,4 +237,4 @@ class ButtonThread : public concurrency::OSThread
     }
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/DebugConfiguration.cpp

@@ -0,0 +1,172 @@
+/* based on https://github.com/arcao/Syslog
+
+MIT License
+
+Copyright (c) 2016 Martin Sloup
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.*/
+
+#include "configuration.h"
+
+#include "DebugConfiguration.h"
+
+#if HAS_WIFI || HAS_ETHERNET
+
+Syslog::Syslog(UDP &client)
+{
+    this->_client = &client;
+    this->_server = NULL;
+    this->_port = 0;
+    this->_deviceHostname = SYSLOG_NILVALUE;
+    this->_appName = SYSLOG_NILVALUE;
+    this->_priDefault = LOGLEVEL_KERN;
+}
+
+Syslog &Syslog::server(const char *server, uint16_t port)
+{
+    if (this->_ip.fromString(server)) {
+        this->_server = NULL;
+    } else {
+        this->_server = server;
+    }
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::server(IPAddress ip, uint16_t port)
+{
+    this->_ip = ip;
+    this->_server = NULL;
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::deviceHostname(const char *deviceHostname)
+{
+    this->_deviceHostname = (deviceHostname == NULL) ? SYSLOG_NILVALUE : deviceHostname;
+    return *this;
+}
+
+Syslog &Syslog::appName(const char *appName)
+{
+    this->_appName = (appName == NULL) ? SYSLOG_NILVALUE : appName;
+    return *this;
+}
+
+Syslog &Syslog::defaultPriority(uint16_t pri)
+{
+    this->_priDefault = pri;
+    return *this;
+}
+
+Syslog &Syslog::logMask(uint8_t priMask)
+{
+    this->_priMask = priMask;
+    return *this;
+}
+
+void Syslog::enable()
+{
+    this->_enabled = true;
+}
+
+void Syslog::disable()
+{
+    this->_enabled = false;
+}
+
+bool Syslog::isEnabled()
+{
+    return this->_enabled;
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *fmt, va_list args)
+{
+    return this->vlogf(pri, this->_appName, fmt, args);
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args)
+{
+    char *message;
+    size_t initialLen;
+    size_t len;
+    bool result;
+
+    initialLen = strlen(fmt);
+
+    message = new char[initialLen + 1];
+
+    len = vsnprintf(message, initialLen + 1, fmt, args);
+    if (len > initialLen) {
+        delete[] message;
+        message = new char[len + 1];
+
+        vsnprintf(message, len + 1, fmt, args);
+    }
+
+    result = this->_sendLog(pri, appName, message);
+
+    delete[] message;
+    return result;
+}
+
+inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *message)
+{
+    int result;
+
+    if (!this->_enabled)
+        return false;
+
+    if ((this->_server == NULL && this->_ip == INADDR_NONE) || this->_port == 0)
+        return false;
+
+    // Check priority against priMask values.
+    if ((LOG_MASK(LOG_PRI(pri)) & this->_priMask) == 0)
+        return true;
+
+    // Set default facility if none specified.
+    if ((pri & LOG_FACMASK) == 0)
+        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
+
+    if (this->_server != NULL) {
+        result = this->_client->beginPacket(this->_server, this->_port);
+    } else {
+        result = this->_client->beginPacket(this->_ip, this->_port);
+    }
+
+    if (result != 1)
+        return false;
+
+    this->_client->print('<');
+    this->_client->print(pri);
+    this->_client->print(F(">1 - "));
+    this->_client->print(this->_deviceHostname);
+    this->_client->print(' ');
+    this->_client->print(appName);
+    this->_client->print(F(" - - - \xEF\xBB\xBF"));
+    this->_client->print(F("["));
+    this->_client->print(int(millis() / 1000));
+    this->_client->print(F("]: "));
+    this->_client->print(message);
+    this->_client->endPacket();
+
+    return true;
+}
+
+#endif

src/DebugConfiguration.h

@@ -1,3 +1,6 @@
+#ifndef SYSLOG_H
+#define SYSLOG_H
+
 // DEBUG LED
 #ifndef LED_INVERTED
 #define LED_INVERTED 0 // define as 1 if LED is active low (on)
@@ -17,6 +20,7 @@
 #define MESHTASTIC_LOG_LEVEL_INFO "INFO "
 #define MESHTASTIC_LOG_LEVEL_WARN "WARN "
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
+#define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
 
 #include "SerialConsole.h"
@@ -24,25 +28,77 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
+#define DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_ERROR(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
 #ifdef DEBUG_PORT
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
 #define LOG_ERROR(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_ERROR, __VA_ARGS__)
-#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_TRACE, __VA_ARGS__)
+#define LOG_CRIT(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_CRIT, __VA_ARGS__)
+#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_TRACE, __VA_ARGS__)
 #else
 #define LOG_DEBUG(...)
 #define LOG_INFO(...)
 #define LOG_WARN(...)
 #define LOG_ERROR(...)
+#define LOG_CRIT(...)
+#define LOG_TRACE(...)
 #endif
 #endif
 
+#define SYSLOG_NILVALUE "-"
+
+#define SYSLOG_CRIT 2  /* critical conditions */
+#define SYSLOG_ERR 3   /* error conditions */
+#define SYSLOG_WARN 4  /* warning conditions */
+#define SYSLOG_INFO 6  /* informational */
+#define SYSLOG_DEBUG 7 /* debug-level messages */
+// trace does not go out to syslog (yet?)
+
+#define LOG_PRIMASK 0x07 /* mask to extract priority part (internal) */
+                         /* extract priority */
+#define LOG_PRI(p) ((p)&LOG_PRIMASK)
+#define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri))
+
+/* facility codes */
+#define LOGLEVEL_KERN (0 << 3)      /* kernel messages */
+#define LOGLEVEL_USER (1 << 3)      /* random user-level messages */
+#define LOGLEVEL_MAIL (2 << 3)      /* mail system */
+#define LOGLEVEL_DAEMON (3 << 3)    /* system daemons */
+#define LOGLEVEL_AUTH (4 << 3)      /* security/authorization messages */
+#define LOGLEVEL_SYSLOG (5 << 3)    /* messages generated internally by syslogd */
+#define LOGLEVEL_LPR (6 << 3)       /* line printer subsystem */
+#define LOGLEVEL_NEWS (7 << 3)      /* network news subsystem */
+#define LOGLEVEL_UUCP (8 << 3)      /* UUCP subsystem */
+#define LOGLEVEL_CRON (9 << 3)      /* clock daemon */
+#define LOGLEVEL_AUTHPRIV (10 << 3) /* security/authorization messages (private) */
+#define LOGLEVEL_FTP (11 << 3)      /* ftp daemon */
+
+/* other codes through 15 reserved for system use */
+#define LOGLEVEL_LOCAL0 (16 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL1 (17 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL2 (18 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL3 (19 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL4 (20 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL5 (21 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL6 (22 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL7 (23 << 3) /* reserved for local use */
+
+#define LOG_NFACILITIES 24 /* current number of facilities */
+#define LOG_FACMASK 0x03f8 /* mask to extract facility part */
+                           /* facility of pri */
+#define LOG_FAC(p) (((p)&LOG_FACMASK) >> 3)
+
+#define LOG_MASK(pri) (1 << (pri))             /* mask for one priority */
+#define LOG_UPTO(pri) ((1 << ((pri) + 1)) - 1) /* all priorities through pri */
+
 // -----------------------------------------------------------------------------
 // AXP192 (Rev1-specific options)
 // -----------------------------------------------------------------------------
@@ -52,3 +108,50 @@
 
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
+
+#if HAS_ETHERNET
+#include <RAK13800_W5100S.h>
+#endif // HAS_ETHERNET
+
+#if HAS_WIFI
+#include <WiFi.h>
+#endif // HAS_WIFI
+
+#if HAS_WIFI || HAS_ETHERNET
+
+class Syslog
+{
+  private:
+    UDP *_client;
+    IPAddress _ip;
+    const char *_server;
+    uint16_t _port;
+    const char *_deviceHostname;
+    const char *_appName;
+    uint16_t _priDefault;
+    uint8_t _priMask = 0xff;
+    bool _enabled = false;
+
+    bool _sendLog(uint16_t pri, const char *appName, const char *message);
+
+  public:
+    explicit Syslog(UDP &client);
+
+    Syslog &server(const char *server, uint16_t port);
+    Syslog &server(IPAddress ip, uint16_t port);
+    Syslog &deviceHostname(const char *deviceHostname);
+    Syslog &appName(const char *appName);
+    Syslog &defaultPriority(uint16_t pri = LOGLEVEL_KERN);
+    Syslog &logMask(uint8_t priMask);
+
+    void enable();
+    void disable();
+    bool isEnabled();
+
+    bool vlogf(uint16_t pri, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+    bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+};
+
+#endif // HAS_ETHERNET || HAS_WIFI
+
+#endif // SYSLOG_H

src/DisplayFormatters.cpp

@@ -0,0 +1,34 @@
+#include "DisplayFormatters.h"
+
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        return useShortName ? "ShortS" : "ShortSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        return useShortName ? "ShortF" : "ShortFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        return useShortName ? "MedS" : "MediumSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        return useShortName ? "MedF" : "MediumFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        return useShortName ? "LongS" : "LongSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
+        return useShortName ? "LongF" : "LongFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        return useShortName ? "LongM" : "LongMod";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
+    default:
+        return useShortName ? "Custom" : "Invalid";
+        break;
+    }
+}

src/DisplayFormatters.h

@@ -0,0 +1,8 @@
+#pragma once
+#include "NodeDB.h"
+
+class DisplayFormatters
+{
+  public:
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+};

src/FSCommon.cpp

@@ -1,3 +1,13 @@
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
 #include "configuration.h"
 
@@ -8,10 +18,19 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
 #endif // HAS_SDCARD
 
+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
 bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
@@ -34,12 +53,21 @@ bool copyFile(const char *from, const char *to)
         f2.write(cbuffer, i);
     }
 
+    f2.flush();
     f2.close();
     f1.close();
     return true;
 #endif
 }
 
+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
@@ -56,7 +84,14 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }
 
-void listDir(const char *dirname, uint8_t levels, boolean del = false)
+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -151,6 +186,13 @@ void listDir(const char *dirname, uint8_t levels, boolean del = false)
 #endif
 }
 
+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
@@ -179,6 +221,9 @@ void fsInit()
 #endif
 }
 
+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
@@ -209,4 +254,4 @@ void setupSDCard()
     LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
     LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
-}
+}

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -42,6 +49,6 @@ using namespace Adafruit_LittleFS_Namespace;
 void fsInit();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
-void listDir(const char *dirname, uint8_t levels, boolean del);
+void listDir(const char *dirname, uint8_t levels, bool del);
 void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -55,7 +55,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +68,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,7 +81,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
@@ -106,7 +106,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -138,8 +138,9 @@ class GPSStatus : public Status
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
-            } else
+            } else {
                 LOG_DEBUG("No GPS lock\n");
+            }
             onNewStatus.notifyObservers(this);
         }
         return 0;
@@ -148,4 +149,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/OSTimer.cpp

@@ -5,7 +5,8 @@
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
     (*tCallback)(tParam1, tParam2);
 }
 
+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
     if (!timer) {

src/Observer.h

@@ -10,12 +10,12 @@ template <class T> class Observable;
  */
 template <class T> class Observer
 {
-    std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observables;
 
   public:
     virtual ~Observer();
 
-    /// Stop watching the obserable
+    /// Stop watching the observable
     void unobserve(Observable<T> *o);
 
     /// Start watching a specified observable
@@ -86,21 +86,21 @@ template <class T> class Observable
 
 template <class T> Observer<T>::~Observer()
 {
-    for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
+    for (typename std::list<Observable<T> *>::const_iterator iterator = observables.begin(); iterator != observables.end();
          ++iterator) {
         (*iterator)->removeObserver(this);
     }
-    observed.clear();
+    observables.clear();
 }
 
 template <class T> void Observer<T>::unobserve(Observable<T> *o)
 {
     o->removeObserver(this);
-    observed.remove(o);
+    observables.remove(o);
 }
 
 template <class T> void Observer<T>::observe(Observable<T> *o)
 {
-    observed.push_back(o);
+    observables.push_back(o);
     o->addObserver(this);
-}
+}

src/Power.cpp

@@ -1,11 +1,64 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
+#include "meshUtils.h"
 #include "sleep.h"
-#include "utils.h"
+
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
+
+#ifdef DEBUG_HEAP_MQTT
+#include "mqtt/MQTT.h"
+#include "target_specific.h"
+#include <WiFi.h>
+#endif
+
+#ifndef DELAY_FOREVER
+#define DELAY_FOREVER portMAX_DELAY
+#endif
+
+#if defined(BATTERY_PIN) && defined(ARCH_ESP32)
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
+static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_1;
+#else // ADC2
+static const adc2_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_2;
+RTC_NOINIT_ATTR uint64_t RTC_reg_b;
+
+#endif // BAT_MEASURE_ADC_UNIT
+
+esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+#ifndef ADC_ATTENUATION
+static const adc_atten_t atten = ADC_ATTEN_DB_11;
+#else
+static const adc_atten_t atten = ADC_ATTENUATION;
+#endif
+#endif // BATTERY_PIN && ARCH_ESP32
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+INA3221Sensor ina3221Sensor;
+#endif
 
 #ifdef HAS_PMU
 #include "XPowersAXP192.tpp"
@@ -13,8 +66,9 @@
 #include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -98,12 +152,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
 
 #ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 30
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    30 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -115,19 +177,19 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
-            // environment.
             uint32_t raw = 0;
+            float scaled = 0;
+
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
+            raw = espAdcRead();
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
-
-            float scaled;
-#ifndef VBAT_RAW_TO_SCALED
-            scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
-#else
-            scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
+            scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
             // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
             last_read_value = scaled;
@@ -135,32 +197,76 @@ class AnalogBatteryLevel : public HasBatteryLevel
         } else {
             return last_read_value;
         }
-#else
+#endif // BATTERY_PIN
         return 0;
-#endif
     }
 
+#if defined(ARCH_ESP32) && !defined(HAS_PMU) && defined(BATTERY_PIN)
+    /**
+     * ESP32 specific function for getting calibrated ADC reads
+     */
+    uint32_t espAdcRead()
+    {
+
+        uint32_t raw = 0;
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL
+        if (heltec_version == 5) {
+            pinMode(ADC_CTRL, OUTPUT);
+            digitalWrite(ADC_CTRL, HIGH);
+            delay(10);
+        }
+#endif
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            raw += adc1_get_raw(adc_channel);
+        }
+#ifdef ADC_CTRL
+        if (heltec_version == 5) {
+            digitalWrite(ADC_CTRL, LOW);
+        }
+#endif
+#else  // ADC2
+        int32_t adc_buf = 0;
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            // ADC2 wifi bug workaround, see
+            // https://github.com/espressif/arduino-esp32/issues/102
+            WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+            SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+            adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            raw += adc_buf;
+        }
+#endif // BAT_MEASURE_ADC_UNIT
+        raw = raw / BATTERY_SENSE_SAMPLES;
+        return raw;
+    }
+#endif
+
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override
-    {
-        return getBatteryPercent() != -1;
-    }
+    virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
+    /// On some boards we don't have the power management chip (like AXPxxxx)
+    /// so we use EXT_PWR_DETECT GPIO pin to detect external power source
     virtual bool isVbusIn() override
     {
+#ifdef EXT_PWR_DETECT
+        // if external powered that pin will be pulled up
+        if (digitalRead(EXT_PWR_DETECT) == HIGH) {
+            return true;
+        }
+        // if it's not HIGH - check the battery
+#endif
+
         return getBattVoltage() > chargingVolt;
     }
 
     /// Assume charging if we have a battery and external power is connected.
     /// we can't be smart enough to say 'full'?
-    virtual bool isCharging() override
-    {
-        return isBatteryConnect() && isVbusIn();
-    }
+    virtual bool isCharging() override { return isBatteryConnect() && isVbusIn(); }
 
   private:
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
@@ -183,6 +289,40 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -192,37 +332,66 @@ Power::Power() : OSThread("Power")
     statusHandler = {};
     low_voltage_counter = 0;
 #ifdef DEBUG_HEAP
-    lastheap = ESP.getFreeHeap();
+    lastheap = memGet.getFreeHeap();
 #endif
 }
 
 bool Power::analogInit()
 {
+#ifdef EXT_PWR_DETECT
+    pinMode(EXT_PWR_DETECT, INPUT);
+#endif
+
 #ifdef BATTERY_PIN
     LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifdef ARCH_ESP32
-    // ESP32 needs special analog stuff
-    adcAttachPin(BATTERY_PIN);
+#ifndef BATTERY_SENSE_RESOLUTION_BITS
+#define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
+
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+
+#ifndef ADC_WIDTH // max resolution by default
+    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
+#else
+    static const adc_bits_width_t width = ADC_WIDTH;
+#endif
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+    adc1_config_width(width);
+    adc1_config_channel_atten(adc_channel, atten);
+#else // ADC2
+    adc2_config_channel_atten(adc_channel, atten);
+    // ADC2 wifi bug workaround
+    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
+    // calibrate ADC
+    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
+    // show ADC characterization base
+    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+    } else {
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+    }
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
+    pinMode(37, OUTPUT); // needed for P channel mosfet to work
+    digitalWrite(37, LOW);
+#endif
+#endif // ARCH_ESP32
+
 #ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-#endif
+#endif // ARCH_NRF52
+    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
 
-#ifndef BATTERY_SENSE_RESOLUTION_BITS
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#endif
-
-    // adcStart(BATTERY_PIN);
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
-                                                         // depending on needed resolution.
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -230,13 +399,15 @@ bool Power::analogInit()
 #endif
 }
 
+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
-    bool found = axpChipInit();
+    bool found = axpChipInit() || analogInit();
 
-    if (!found) {
-        found = analogInit();
-    }
     enabled = found;
     low_voltage_counter = 0;
 
@@ -250,17 +421,24 @@ void Power::shutdown()
     digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
 #endif
 
-#ifdef HAS_PMU
     LOG_INFO("Shutting down\n");
-    if (PMU) {
+
+#ifdef HAS_PMU
+    if (pmu_found == true) {
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
         PMU->shutdown();
     }
-#elif defined(ARCH_NRF52)
-    playBeep();
+#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#ifdef PIN_LED1
     ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2
     ledOff(PIN_LED2);
-    doDeepSleep(DELAY_FOREVER);
+#endif
+#ifdef PIN_LED3
+    ledOff(PIN_LED3);
+#endif
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }
 
@@ -271,7 +449,7 @@ void Power::readPowerStatus()
 {
     if (batteryLevel) {
         bool hasBattery = batteryLevel->isBatteryConnect();
-        int batteryVoltageMv = 0;
+        uint32_t batteryVoltageMv = 0;
         int8_t batteryChargePercent = 0;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
@@ -288,15 +466,30 @@ void Power::readPowerStatus()
             }
         }
 
+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+            NRF_USB = OptFalse;
+        } else {
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+            NRF_USB = OptTrue;
+        }
+#endif
         // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
-        if (lastheap != ESP.getFreeHeap()) {
+        if (lastheap != memGet.getFreeHeap()) {
             LOG_DEBUG("Threads running:");
             int running = 0;
             for (int i = 0; i < MAX_THREADS; i++) {
@@ -307,33 +500,52 @@ void Power::readPowerStatus()
                 }
             }
             LOG_DEBUG("\n");
-            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", ESP.getFreeHeap(), ESP.getHeapSize(),
-                      ESP.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
-            lastheap = ESP.getFreeHeap();
+            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+                      memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+            lastheap = memGet.getFreeHeap();
+        }
+#ifdef DEBUG_HEAP_MQTT
+        if (mqtt) {
+            // send MQTT-Packet with Heap-Size
+            uint8_t dmac[6];
+            getMacAddr(dmac); // Get our hardware ID
+            char mac[18];
+            sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
+
+            auto newHeap = memGet.getFreeHeap();
+            std::string heapTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+            std::string heapString = std::to_string(newHeap);
+            mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+            auto wifiRSSI = WiFi.RSSI();
+            std::string wifiTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+            std::string wifiString = std::to_string(wifiRSSI);
+            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
         }
 #endif
 
-// If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
-// Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef ARCH_NRF52
+#endif
+
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
+        // a row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                LOG_DEBUG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
                     // We can't trigger deep sleep on NRF52, it's freezing the board
-                    // powerFSM.trigger(EVENT_LOW_BATTERY);
                     LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+#else
+                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                    powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
                 }
             } else {
                 low_voltage_counter = 0;
             }
         }
-#else
-        // If we have a battery at all and it is less than 10% full, force deep sleep
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB() && batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS)
-            powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
     } else {
         // No power sensing on this board - tell everyone else we have no idea what is happening
         const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
@@ -378,10 +590,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -394,10 +608,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the axp192
- share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
- 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -487,52 +701,90 @@ bool Power::axpChipInit()
 
         // Set up the charging voltage
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
-        // t-beam s3 core
+        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // Unuse power channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_ALDO1);
+            PMU->disablePowerOutput(XPOWERS_ALDO4);
+            PMU->disablePowerOutput(XPOWERS_BLDO1);
+            PMU->disablePowerOutput(XPOWERS_BLDO2);
+            PMU->disablePowerOutput(XPOWERS_DLDO1);
+            PMU->disablePowerOutput(XPOWERS_DLDO2);
 
-        /**
-         * gnss module power channel
-         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO4);
+            // GNSS RTC PowerVDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
 
-        // lora radio power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // ESP32 VDD 3300mV
+            //  ! No need to set, automatically open , Don't close it
+            //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+            //  PMU->setProtectedChannel(XPOWERS_DCDC1);
 
-        // m.2 interface
-        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-        PMU->enablePowerOutput(XPOWERS_DCDC3);
+            // LoRa VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        /**
-         * ALDO2 cannot be turned off.
-         * It is a necessary condition for sensor communication.
-         * It must be turned on to properly access the sensor and screen
-         * It is also responsible for the power supply of PCF8563
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // GNSS VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+            // t-beam s3 core
+            /**
+             * gnss module power channel
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
 
-        // 6-axis , magnetometer ,bme280 , oled screen power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO1);
+            // lora radio power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
 
-        // sdcard power channle
-        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_BLDO1);
+            // m.2 interface
+            PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+            PMU->enablePowerOutput(XPOWERS_DCDC3);
 
-        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-        // PMU->enablePowerOutput(XPOWERS_DCDC4);
+            /**
+             * ALDO2 cannot be turned off.
+             * It is a necessary condition for sensor communication.
+             * It must be turned on to properly access the sensor and screen
+             * It is also responsible for the power supply of PCF8563
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        // not use channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+            // 6-axis , magnetometer ,bme280 , oled screen power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
+
+            // sdcard power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
+
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+#endif
+
+            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+            // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+            // not use channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        }
 
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);

src/PowerFSM.cpp

@@ -1,5 +1,13 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
-#include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -26,22 +34,25 @@ static bool isPowered()
         1) If we're powered up and there's no battery, we must be getting power externally. (because we'd be dead otherwise)
 
         2) If we detect USB power from the power management chip, we must be getting power externally.
+
+        3) On some boards we don't have the power management chip (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect
+       external power source (see `isVbusIn()` in `Power.cpp`)
     */
     return !isPowerSavingMode && powerStatus && (!powerStatus->getHasBattery() || powerStatus->getHasUSB());
 }
 
 static void sdsEnter()
 {
-    LOG_INFO("Enter state: SDS\n");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
+    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_INFO("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -66,11 +77,11 @@ static void lsIdle()
 
     // Do we have more sleeping to do?
     if (secsSlept < config.power.ls_secs) {
-        // Briefly come out of sleep long enough to blink the led once every few seconds
-        uint32_t sleepTime = 30;
-
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
+            // Briefly come out of sleep long enough to blink the led once every few seconds
+            uint32_t sleepTime = 30;
+
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
 
@@ -78,8 +89,8 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                setLed(true);                 // briefly turn on led
-                wakeCause2 = doLightSleep(1); // leave led on for 1ms
+                setLed(true);                   // briefly turn on led
+                wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
                 // LOG_INFO("sleeping, flash led!\n");
@@ -96,12 +107,11 @@ static void lsIdle()
                 LOG_INFO("wakeCause2 %d\n", wakeCause2);
 
 #ifdef BUTTON_PIN
-                bool pressed = !digitalRead(BUTTON_PIN);
+                bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #else
                 bool pressed = false;
 #endif
-                if (pressed) // If we woke because of press, instead generate a PRESS event.
-                {
+                if (pressed) { // If we woke because of press, instead generate a PRESS event.
                     powerFSM.trigger(EVENT_PRESS);
                 } else {
                     // Otherwise let the NB state handle the IRQ (and that state will handle stuff like IRQs etc)
@@ -126,16 +136,16 @@ static void lsIdle()
 static void lsExit()
 {
     LOG_INFO("Exit state: LS\n");
-    // setGPSPower(true); // restore GPS power
-    if (gps)
-        gps->forceWake(true);
 }
 
 static void nbEnter()
 {
-    LOG_INFO("Enter state: NB\n");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
+#endif
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -148,7 +158,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_INFO("Enter state: SERIAL\n");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -156,12 +166,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
 {
-    LOG_INFO("Enter state: POWER\n");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -169,7 +181,11 @@ static void powerEnter()
     } else {
         screen->setOn(true);
         setBluetoothEnable(true);
-        screen->print("Powered...\n");
+        // within enter() the function getState() returns the state we came from
+        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+            strcmp(powerFSM.getState()->name, "DARK") != 0) {
+            screen->print("Powered...\n");
+        }
     }
 }
 
@@ -186,25 +202,15 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    screen->print("Unpowered...\n");
+    if (!isPowered())
+        screen->print("Unpowered...\n");
 }
 
 static void onEnter()
 {
-    LOG_INFO("Enter state: ON\n");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
-
-    static uint32_t lastPingMs;
-
-    uint32_t now = millis();
-
-    if ((now - lastPingMs) >
-        30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
-        if (displayedNodeNum)
-            service.sendNetworkPing(displayedNodeNum, true); // Refresh the currently displayed node
-        lastPingMs = now;
-    }
 }
 
 static void onIdle()
@@ -222,7 +228,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_INFO("Enter state: BOOT\n");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -239,6 +245,8 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
@@ -246,7 +254,11 @@ void PowerFSM_setup()
 
     // wake timer expired or a packet arrived
     // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
     powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
@@ -257,7 +269,7 @@ void PowerFSM_setup()
     // Handle press events - note: we ignore button presses when in API mode
     powerFSM.add_transition(&stateLS, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_PRESS, NULL, "Press");
-    powerFSM.add_transition(&stateDARK, &stateON, EVENT_PRESS, NULL, "Press");
+    powerFSM.add_transition(&stateDARK, isPowered() ? &statePOWER : &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
     powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
     powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
@@ -283,7 +295,8 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateLS, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_INPUT, NULL, "Input Device");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
+    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device");       // restarts the sleep timer
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
 
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
     powerFSM.add_transition(&stateON, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
@@ -299,10 +312,10 @@ void PowerFSM_setup()
         powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
-        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text"); // restarts the sleep timer
+        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text"); // restarts the sleep timer
     }
 
     // If we are not in statePOWER but get a serial connection, suppress sleep (and keep the screen on) while connected
@@ -330,13 +343,19 @@ void PowerFSM_setup()
     powerFSM.add_timed_transition(&stateON, &stateDARK,
                                   getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
+    powerFSM.add_timed_transition(&statePOWER, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 
+// We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
-    State *lowPowerState = &stateLS;
-    // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
-
     // See: https://github.com/meshtastic/firmware/issues/1071
-    if (isRouter || config.power.is_power_saving) {
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // modules
+    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
@@ -344,11 +363,7 @@ void PowerFSM_setup()
                                       getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
                                       NULL, "Bluetooth timeout");
     }
-
-    if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL,
-                                      "mesh timeout");
 #endif
 
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
-}
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
+}

src/PowerFSM.h

@@ -8,7 +8,7 @@
 #define EVENT_WAKE_TIMER 2
 // #define EVENT_RECEIVED_PACKET 3
 #define EVENT_PACKET_FOR_PHONE 4
-#define EVENT_RECEIVED_TEXT_MSG 5
+#define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
 #define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen
@@ -23,6 +23,6 @@
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
 extern Fsm powerFSM;
-extern State statePOWER, stateSERIAL;
+extern State stateON, statePOWER, stateSERIAL, stateDARK;
 
 void PowerFSM_setup();

src/PowerFSMThread.h

@@ -21,7 +21,7 @@ class PowerFSMThread : public OSThread
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
         /// cpu for serial rx - FIXME)
-        auto state = powerFSM.getState();
+        const State *state = powerFSM.getState();
         canSleep = (state != &statePOWER) && (state != &stateSERIAL);
 
         if (powerStatus->getHasUSB()) {
@@ -33,7 +33,7 @@ class PowerFSMThread : public OSThread
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 
-        return 10;
+        return 100;
     }
 };
 

src/RF95Configuration.h

@@ -2,6 +2,6 @@
 #ifdef USE_RF95
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
-#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95
+#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
 #define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
 #endif

src/RedirectablePrint.cpp

@@ -5,14 +5,30 @@
 #include "configuration.h"
 #include <assert.h>
 #include <cstring>
+#include <memory>
+#include <stdexcept>
 #include <sys/time.h>
 #include <time.h>
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
 /**
  * A printer that doesn't go anywhere
  */
 NoopPrint noopPrint;
 
+#if HAS_WIFI || HAS_ETHERNET
+extern Syslog syslog;
+#endif
+void RedirectablePrint::rpInit()
+{
+#ifdef HAS_FREE_RTOS
+    inDebugPrint = xSemaphoreCreateMutexStatic(&this->_MutexStorageSpace);
+#endif
+}
+
 void RedirectablePrint::setDestination(Print *_dest)
 {
     assert(_dest);
@@ -56,10 +72,24 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
+#ifdef ARCH_PORTDUINO
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+        return 0;
+#endif
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+        return 0;
+    }
     size_t r = 0;
-
+#ifdef HAS_FREE_RTOS
+    if (inDebugPrint != nullptr && xSemaphoreTake(inDebugPrint, portMAX_DELAY) == pdTRUE) {
+#else
     if (!inDebugPrint) {
         inDebugPrint = true;
+#endif
 
         va_list arg;
         va_start(arg, format);
@@ -81,10 +111,17 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
                 int hour = hms / SEC_PER_HOUR;
                 int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
                 int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
-
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#else
                 r += printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#endif
             } else
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#else
                 r += printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#endif
 
             auto thread = concurrency::OSThread::currentThread;
             if (thread) {
@@ -96,10 +133,47 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
         }
         r += vprintf(format, arg);
+
+#if (HAS_WIFI || HAS_ETHERNET) && !defined(ARCH_PORTDUINO)
+        // if syslog is in use, collect the log messages and send them to syslog
+        if (syslog.isEnabled()) {
+            int ll = 0;
+            switch (logLevel[0]) {
+            case 'D':
+                ll = SYSLOG_DEBUG;
+                break;
+            case 'I':
+                ll = SYSLOG_INFO;
+                break;
+            case 'W':
+                ll = SYSLOG_WARN;
+                break;
+            case 'E':
+                ll = SYSLOG_ERR;
+                break;
+            case 'C':
+                ll = SYSLOG_CRIT;
+                break;
+            default:
+                ll = 0;
+            }
+            auto thread = concurrency::OSThread::currentThread;
+            if (thread) {
+                syslog.vlogf(ll, thread->ThreadName.c_str(), format, arg);
+            } else {
+                syslog.vlogf(ll, format, arg);
+            }
+        }
+#endif
+
         va_end(arg);
 
         isContinuationMessage = !hasNewline;
+#ifdef HAS_FREE_RTOS
+        xSemaphoreGive(inDebugPrint);
+#else
         inDebugPrint = false;
+#endif
     }
 
     return r;
@@ -136,3 +210,22 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
     }
     log(logLevel, "   +------------------------------------------------+ +----------------+\n");
 }
+
+std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)
+{
+    int n = ((int)fmt_str.size()) * 2; /* Reserve two times as much as the length of the fmt_str */
+    std::unique_ptr<char[]> formatted;
+    va_list ap;
+    while (1) {
+        formatted.reset(new char[n]); /* Wrap the plain char array into the unique_ptr */
+        strcpy(&formatted[0], fmt_str.c_str());
+        va_start(ap, fmt_str);
+        int final_n = vsnprintf(&formatted[0], n, fmt_str.c_str(), ap);
+        va_end(ap);
+        if (final_n < 0 || final_n >= n)
+            n += abs(final_n - n + 1);
+        else
+            break;
+    }
+    return std::string(formatted.get());
+}

src/RedirectablePrint.h

@@ -1,7 +1,9 @@
 #pragma once
 
+#include "../freertosinc.h"
 #include <Print.h>
 #include <stdarg.h>
+#include <string>
 
 /**
  * A Printable that can be switched to squirt its bytes to a different sink.
@@ -15,14 +17,19 @@ class RedirectablePrint : public Print
     /// Used to allow multiple logDebug messages to appear on a single log line
     bool isContinuationMessage = false;
 
+#ifdef HAS_FREE_RTOS
+    SemaphoreHandle_t inDebugPrint = nullptr;
+    StaticSemaphore_t _MutexStorageSpace;
+#else
     volatile bool inDebugPrint = false;
-
+#endif
   public:
     explicit RedirectablePrint(Print *_dest) : dest(_dest) {}
 
     /**
      * Set a new destination
      */
+    void rpInit();
     void setDestination(Print *dest);
 
     virtual size_t write(uint8_t c);
@@ -40,6 +47,8 @@ class RedirectablePrint : public Print
     size_t vprintf(const char *format, va_list arg);
 
     void hexDump(const char *logLevel, unsigned char *buf, uint16_t len);
+
+    std::string mt_sprintf(const std::string fmt_str, ...);
 };
 
 class NoopPrint : public Print
@@ -51,4 +60,4 @@ class NoopPrint : public Print
 /**
  * A printer that doesn't go anywhere
  */
-extern NoopPrint noopPrint;
+extern NoopPrint noopPrint;

src/SerialConsole.cpp

@@ -12,6 +12,7 @@ SerialConsole *console;
 void consoleInit()
 {
     new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+    DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
 void consolePrintf(const char *format, ...)
@@ -31,7 +32,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {

src/airtime.cpp

@@ -6,20 +6,22 @@ AirTime *airTime = NULL;
 
 // Don't read out of this directly. Use the helper functions.
 
+uint32_t air_period_tx[PERIODS_TO_LOG];
+uint32_t air_period_rx[PERIODS_TO_LOG];
+
 void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
         LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
-        myNodeInfo.air_period_tx[0] = myNodeInfo.air_period_tx[0] + airtime_ms;
+        air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
-
     } else if (reportType == RX_LOG) {
         LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
-        myNodeInfo.air_period_rx[0] = myNodeInfo.air_period_rx[0] + airtime_ms;
+        air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
         LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
@@ -55,16 +57,16 @@ void AirTime::airtimeRotatePeriod()
             this->airtimes.periodRX[i + 1] = this->airtimes.periodRX[i];
             this->airtimes.periodRX_ALL[i + 1] = this->airtimes.periodRX_ALL[i];
 
-            myNodeInfo.air_period_tx[i + 1] = this->airtimes.periodTX[i];
-            myNodeInfo.air_period_rx[i + 1] = this->airtimes.periodRX[i];
+            air_period_tx[i + 1] = this->airtimes.periodTX[i];
+            air_period_rx[i + 1] = this->airtimes.periodRX[i];
         }
 
         this->airtimes.periodTX[0] = 0;
         this->airtimes.periodRX[0] = 0;
         this->airtimes.periodRX_ALL[0] = 0;
 
-        myNodeInfo.air_period_tx[0] = 0;
-        myNodeInfo.air_period_rx[0] = 0;
+        air_period_tx[0] = 0;
+        air_period_rx[0] = 0;
 
         this->airtimes.lastPeriodIndex = this->currentPeriodIndex();
     }
@@ -179,18 +181,17 @@ int32_t AirTime::runOnce()
         }
 
         // Init airtime windows to all 0
-        for (int i = 0; i < myNodeInfo.air_period_rx_count; i++) {
+        for (int i = 0; i < PERIODS_TO_LOG; i++) {
             this->airtimes.periodTX[i] = 0;
             this->airtimes.periodRX[i] = 0;
             this->airtimes.periodRX_ALL[i] = 0;
 
-            // myNodeInfo.air_period_tx[i] = 0;
-            // myNodeInfo.air_period_rx[i] = 0;
+            // air_period_tx[i] = 0;
+            // air_period_rx[i] = 0;
         }
 
         firstTime = false;
         lastUtilPeriod = utilPeriod;
-
     } else {
         this->airtimeRotatePeriod();
 
@@ -206,12 +207,6 @@ int32_t AirTime::runOnce()
 
             this->utilizationTX[utilPeriodTX] = 0;
         }
-
-        // Update channel_utilization every second.
-        myNodeInfo.channel_utilization = airTime->channelUtilizationPercent();
-
-        // Update channel_utilization every second.
-        myNodeInfo.air_util_tx = airTime->utilizationTXPercent();
     }
     /*
         LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
@@ -223,4 +218,4 @@ int32_t AirTime::runOnce()
         LOG_DEBUG("\n");
     */
     return (1000 * 1);
-}
+}

src/airtime.h

@@ -17,9 +17,9 @@
 
   Example analytics:
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
                     other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.

src/commands.h

@@ -15,4 +15,6 @@ enum class Cmd {
     PRINT,
     START_SHUTDOWN_SCREEN,
     START_REBOOT_SCREEN,
+    SHOW_PREV_FRAME,
+    SHOW_NEXT_FRAME
 };

src/concurrency/InterruptableDelay.h

@@ -18,7 +18,7 @@ namespace concurrency
  *
  * Useful for they top level loop() delay call to keep the CPU powered down until our next scheduled event or some external event.
  *
- * This is implmented for FreeRTOS but should be easy to port to other operating systems.
+ * This is implemented for FreeRTOS but should be easy to port to other operating systems.
  */
 class InterruptableDelay
 {

src/concurrency/NotifiedWorkerThread.cpp

@@ -31,12 +31,14 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
         runASAP = true;
 
         notification = v;
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("setting notification %d\n", v);
+        }
         return true;
     } else {
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("dropping notification %d\n", v);
+        }
         return false;
     }
 }
@@ -64,8 +66,9 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
 
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("delaying notification %u\n", delay);
+        }
     }
 
     return didIt;

src/concurrency/OSThread.cpp

@@ -1,5 +1,6 @@
 #include "OSThread.h"
 #include "configuration.h"
+#include "memGet.h"
 #include <assert.h>
 
 namespace concurrency
@@ -60,14 +61,17 @@ bool OSThread::shouldRun(unsigned long time)
 {
     bool r = Thread::shouldRun(time);
 
-    if (showRun && r)
+    if (showRun && r) {
         LOG_DEBUG("Thread %s: run\n", ThreadName.c_str());
+    }
 
-    if (showWaiting && enabled && !r)
+    if (showWaiting && enabled && !r) {
         LOG_DEBUG("Thread %s: wait %lu\n", ThreadName.c_str(), interval);
+    }
 
-    if (showDisabled && !enabled)
+    if (showDisabled && !enabled) {
         LOG_DEBUG("Thread %s: disabled\n", ThreadName.c_str());
+    }
 
     return r;
 }
@@ -75,12 +79,12 @@ bool OSThread::shouldRun(unsigned long time)
 void OSThread::run()
 {
 #ifdef DEBUG_HEAP
-    auto heap = ESP.getFreeHeap();
+    auto heap = memGet.getFreeHeap();
 #endif
     currentThread = this;
     auto newDelay = runOnce();
 #ifdef DEBUG_HEAP
-    auto newHeap = ESP.getFreeHeap();
+    auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
         LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------\n", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)

src/concurrency/OSThread.h

@@ -53,7 +53,7 @@ class OSThread : public Thread
 
     static void setup();
 
-    int32_t disable();
+    virtual int32_t disable();
 
     /**
      * Wait a specified number msecs starting from the current time (rather than the last time we were run)
@@ -67,6 +67,7 @@ class OSThread : public Thread
      * Returns desired period for next invocation (or RUN_SAME for no change)
      */
     virtual int32_t runOnce() = 0;
+    bool sleepOnNextExecution = false;
 
     // Do not override this
     virtual void run();
@@ -87,4 +88,4 @@ extern bool hasBeenSetup;
 
 void assertIsSetup();
 
-} // namespace concurrency
+} // namespace concurrency

src/configuration.h

@@ -57,8 +57,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found
 
 /// Convert a preprocessor name into a quoted string
-#define xstr(s) str(s)
-#define str(s) #s
+#define xstr(s) ystr(s)
+#define ystr(s) #s
 
 /// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
 #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
@@ -82,7 +82,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define DISABLE_NTP
 
 // Disable the welcome screen and allow
-//#define DISABLE_WELCOME_UNSET
+// #define DISABLE_WELCOME_UNSET
 
 // -----------------------------------------------------------------------------
 // OLED & Input
@@ -93,13 +93,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // The SH1106 controller is almost, but not quite, the same as SSD1306
 // Define this if you know you have that controller or your "SSD1306" misbehaves.
-//#define USE_SH1106
+// #define USE_SH1106
 
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// The m5stack I2C Keyboard (also RAK14004)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
+#define TDECK_KB_ADDR 0x55
+#define BBQ10_KB_ADDR 0x1F
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -109,6 +111,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
 #define QMC5883L_ADDR 0x1E
@@ -116,6 +119,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_ADDR 0x44
+#define PMSA0031_ADDR 0x12
+
+// -----------------------------------------------------------------------------
+// ACCELEROMETER
+// -----------------------------------------------------------------------------
+#define MPU6050_ADDR 0x68
+#define LIS3DH_ADR 0x18
+#define BMA423_ADDR 0x19
+
+// -----------------------------------------------------------------------------
+// LED
+// -----------------------------------------------------------------------------
+#define NCP5623_ADDR 0x38
 
 // -----------------------------------------------------------------------------
 // Security
@@ -130,9 +146,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_BAUDRATE 9600
 
 #ifndef GPS_THREAD_INTERVAL
-#define GPS_THREAD_INTERVAL 100
+#define GPS_THREAD_INTERVAL 200
 #endif
 
+// convert 24-bit color to 16-bit (56K)
+#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
@@ -160,9 +179,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BUTTON
 #define HAS_BUTTON 0
 #endif
+#ifndef HAS_TRACKBALL
+#define HAS_TRACKBALL 0
+#endif
+#ifndef HAS_TOUCHSCREEN
+#define HAS_TOUCHSCREEN 0
+#endif
 #ifndef HAS_TELEMETRY
 #define HAS_TELEMETRY 0
 #endif
+#ifndef HAS_SENSOR
+#define HAS_SENSOR 0
+#endif
 #ifndef HAS_RADIO
 #define HAS_RADIO 0
 #endif
@@ -181,4 +209,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
-#endif
+#endif

src/detect/ScanI2C.cpp

@@ -0,0 +1,76 @@
+#include "ScanI2C.h"
+
+const ScanI2C::DeviceAddress ScanI2C::ADDRESS_NONE = ScanI2C::DeviceAddress();
+const ScanI2C::FoundDevice ScanI2C::DEVICE_NONE = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE, ADDRESS_NONE);
+
+ScanI2C::ScanI2C() = default;
+
+void ScanI2C::scanPort(ScanI2C::I2CPort port) {}
+
+void ScanI2C::setSuppressScreen()
+{
+    shouldSuppressScreen = true;
+}
+
+ScanI2C::FoundDevice ScanI2C::firstScreen() const
+{
+    // Allow to override the scanner results for screen
+    if (shouldSuppressScreen)
+        return DEVICE_NONE;
+
+    ScanI2C::DeviceType types[] = {SCREEN_SSD1306, SCREEN_SH1106, SCREEN_ST7567, SCREEN_UNKNOWN};
+    return firstOfOrNONE(4, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstRTC() const
+{
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
+    return firstOfOrNONE(2, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
+{
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004};
+    return firstOfOrNONE(4, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
+{
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
+    return firstOfOrNONE(3, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const
+{
+    return DEVICE_NONE;
+}
+
+bool ScanI2C::exists(ScanI2C::DeviceType) const
+{
+    return false;
+}
+
+ScanI2C::FoundDevice ScanI2C::firstOfOrNONE(size_t count, ScanI2C::DeviceType *types) const
+{
+    return DEVICE_NONE;
+}
+
+size_t ScanI2C::countDevices() const
+{
+    return 0;
+}
+
+ScanI2C::DeviceAddress::DeviceAddress(ScanI2C::I2CPort port, uint8_t address) : port(port), address(address) {}
+
+ScanI2C::DeviceAddress::DeviceAddress() : DeviceAddress(I2CPort::NO_I2C, 0) {}
+
+bool ScanI2C::DeviceAddress::operator<(const ScanI2C::DeviceAddress &other) const
+{
+    return
+        // If this one has no port and other has a port
+        (port == NO_I2C && other.port != NO_I2C)
+        // if both have a port and this one's address is lower
+        || (port != NO_I2C && other.port != NO_I2C && (address < other.address));
+}
+
+ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}

src/detect/ScanI2C.h

@@ -0,0 +1,104 @@
+#pragma once
+
+#include <stddef.h>
+#include <stdint.h>
+
+class ScanI2C
+{
+  public:
+    typedef enum DeviceType {
+        NONE,
+        SCREEN_SSD1306,
+        SCREEN_SH1106,
+        SCREEN_UNKNOWN, // has the same address as the two above but does not respond to the same commands
+        SCREEN_ST7567,
+        ATECC608B,
+        RTC_RV3028,
+        RTC_PCF8563,
+        CARDKB,
+        TDECKKB,
+        BBQ10KB,
+        RAK14004,
+        PMU_AXP192_AXP2101,
+        BME_680,
+        BME_280,
+        BMP_280,
+        INA260,
+        INA219,
+        INA3221,
+        MCP9808,
+        SHT31,
+        SHTC3,
+        LPS22HB,
+        QMC6310,
+        QMI8658,
+        QMC5883L,
+        PMSA0031,
+        MPU6050,
+        LIS3DH,
+        BMA423,
+#ifdef HAS_NCP5623
+        NCP5623,
+#endif
+    } DeviceType;
+
+    // typedef uint8_t DeviceAddress;
+    typedef enum I2CPort {
+        NO_I2C,
+        WIRE,
+        WIRE1,
+    } I2CPort;
+
+    typedef struct DeviceAddress {
+        I2CPort port;
+        uint8_t address;
+
+        explicit DeviceAddress(I2CPort port, uint8_t address);
+        DeviceAddress();
+
+        bool operator<(const DeviceAddress &other) const;
+    } DeviceAddress;
+
+    static const DeviceAddress ADDRESS_NONE;
+
+    typedef uint8_t RegisterAddress;
+
+    typedef struct FoundDevice {
+        DeviceType type;
+        DeviceAddress address;
+
+        explicit FoundDevice(DeviceType = DeviceType::NONE, DeviceAddress = ADDRESS_NONE);
+    } FoundDevice;
+
+    static const FoundDevice DEVICE_NONE;
+
+  public:
+    ScanI2C();
+
+    virtual void scanPort(ScanI2C::I2CPort);
+
+    /*
+     * A bit of a hack, this tells the scanner not to tell later systems there is a screen to avoid enabling it.
+     */
+    void setSuppressScreen();
+
+    FoundDevice firstScreen() const;
+
+    FoundDevice firstRTC() const;
+
+    FoundDevice firstKeyboard() const;
+
+    FoundDevice firstAccelerometer() const;
+
+    virtual FoundDevice find(DeviceType) const;
+
+    virtual bool exists(DeviceType) const;
+
+    virtual size_t countDevices() const;
+
+  protected:
+    virtual FoundDevice firstOfOrNONE(size_t, DeviceType[]) const;
+
+  private:
+    bool shouldSuppressScreen = false;
+};

src/detect/ScanI2CTwoWire.cpp

@@ -0,0 +1,324 @@
+#include "ScanI2CTwoWire.h"
+
+#include "concurrency/LockGuard.h"
+#include "configuration.h"
+#if defined(ARCH_PORTDUINO)
+#include "linux/LinuxHardwareI2C.h"
+#endif
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#include "main.h" // atecc
+#endif
+
+// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
+#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
+#endif
+
+ScanI2C::FoundDevice ScanI2CTwoWire::find(ScanI2C::DeviceType type) const
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    return exists(type) ? ScanI2C::FoundDevice(type, deviceAddresses.at(type)) : DEVICE_NONE;
+}
+
+bool ScanI2CTwoWire::exists(ScanI2C::DeviceType type) const
+{
+    return deviceAddresses.find(type) != deviceAddresses.end();
+}
+
+ScanI2C::FoundDevice ScanI2CTwoWire::firstOfOrNONE(size_t count, DeviceType types[]) const
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    for (size_t k = 0; k < count; k++) {
+        ScanI2C::DeviceType current = types[k];
+
+        if (exists(current)) {
+            return ScanI2C::FoundDevice(current, deviceAddresses.at(current));
+        }
+    }
+
+    return DEVICE_NONE;
+}
+
+ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
+{
+    TwoWire *i2cBus = fetchI2CBus(addr);
+
+    uint8_t r = 0;
+    uint8_t r_prev = 0;
+    uint8_t c = 0;
+    ScanI2C::DeviceType o_probe = ScanI2C::DeviceType::SCREEN_UNKNOWN;
+    do {
+        r_prev = r;
+        i2cBus->beginTransmission(addr.address);
+        i2cBus->write((uint8_t)0x00);
+        i2cBus->endTransmission();
+        i2cBus->requestFrom((int)addr.address, 1);
+        if (i2cBus->available()) {
+            r = i2cBus->read();
+        }
+        r &= 0x0f;
+
+        if (r == 0x08 || r == 0x00) {
+            LOG_INFO("sh1106 display found\n");
+            o_probe = SCREEN_SH1106; // SH1106
+        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
+            LOG_INFO("ssd1306 display found\n");
+            o_probe = SCREEN_SSD1306; // SSD1306
+        }
+        c++;
+    } while ((r != r_prev) && (c < 4));
+    LOG_DEBUG("0x%x subtype probed in %i tries \n", r, c);
+
+    return o_probe;
+}
+void ScanI2CTwoWire::printATECCInfo() const
+{
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+    atecc.readConfigZone(false);
+
+    LOG_DEBUG("ATECC608B Serial Number: ");
+    for (int i = 0; i < 9; i++) {
+        LOG_DEBUG("%02x", atecc.serialNumber[i]);
+    }
+
+    LOG_DEBUG(", Rev Number: ");
+    for (int i = 0; i < 4; i++) {
+        LOG_DEBUG("%02x", atecc.revisionNumber[i]);
+    }
+    LOG_DEBUG("\n");
+
+    LOG_DEBUG("ATECC608B Config %s", atecc.configLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Data %s", atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Slot 0 %s\n", atecc.slot0LockStatus ? "Locked" : "Unlocked");
+
+    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
+        if (atecc.generatePublicKey() == false) {
+            LOG_DEBUG("ATECC608B Error generating public key\n");
+        } else {
+            LOG_DEBUG("ATECC608B Public Key: ");
+            for (int i = 0; i < 64; i++) {
+                LOG_DEBUG("%02x", atecc.publicKey64Bytes[i]);
+            }
+            LOG_DEBUG("\n");
+        }
+    }
+#endif
+}
+
+uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation &registerLocation,
+                                          ScanI2CTwoWire::ResponseWidth responseWidth) const
+{
+    uint16_t value = 0x00;
+    TwoWire *i2cBus = fetchI2CBus(registerLocation.i2cAddress);
+
+    i2cBus->beginTransmission(registerLocation.i2cAddress.address);
+    i2cBus->write(registerLocation.registerAddress);
+    i2cBus->endTransmission();
+    delay(20);
+    i2cBus->requestFrom(registerLocation.i2cAddress.address, responseWidth);
+    LOG_DEBUG("Wire.available() = %d\n", i2cBus->available());
+    if (i2cBus->available() == 2) {
+        // Read MSB, then LSB
+        value = (uint16_t)i2cBus->read() << 8;
+        value |= i2cBus->read();
+    } else if (i2cBus->available()) {
+        value = i2cBus->read();
+    }
+    return value;
+}
+
+#define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
+    case ADDR:                                                                                                                   \
+        LOG_INFO(__VA_ARGS__);                                                                                                   \
+        type = T;                                                                                                                \
+        break;
+
+void ScanI2CTwoWire::scanPort(I2CPort port)
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    LOG_DEBUG("Scanning for i2c devices on port %d\n", port);
+
+    uint8_t err;
+
+    DeviceAddress addr(port, 0x00);
+
+    uint16_t registerValue = 0x00;
+    ScanI2C::DeviceType type;
+    TwoWire *i2cBus;
+#ifdef RV3028_RTC
+    Melopero_RV3028 rtc;
+#endif
+
+#ifdef I2C_SDA1
+    if (port == I2CPort::WIRE1) {
+        i2cBus = &Wire1;
+    } else {
+#endif
+        i2cBus = &Wire;
+#ifdef I2C_SDA1
+    }
+#endif
+
+    for (addr.address = 1; addr.address < 127; addr.address++) {
+        i2cBus->beginTransmission(addr.address);
+#ifdef ARCH_PORTDUINO
+        if (i2cBus->read() != -1)
+            err = 0;
+        else
+            err = 2;
+#else
+        err = i2cBus->endTransmission();
+#endif
+        type = NONE;
+        if (err == 0) {
+            LOG_DEBUG("I2C device found at address 0x%x\n", addr.address);
+
+            switch (addr.address) {
+            case SSD1306_ADDRESS:
+                type = probeOLED(addr);
+                break;
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+            case ATECC608B_ADDR:
+                type = ATECC608B;
+                if (atecc.begin(addr.address) == true) {
+                    LOG_INFO("ATECC608B initialized\n");
+                } else {
+                    LOG_WARN("ATECC608B initialization failed\n");
+                }
+                printATECCInfo();
+                break;
+#endif
+
+#ifdef RV3028_RTC
+            case RV3028_RTC:
+                // foundDevices[addr] = RTC_RV3028;
+                type = RTC_RV3028;
+                LOG_INFO("RV3028 RTC found\n");
+                rtc.initI2C(*i2cBus);
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
+                break;
+#endif
+
+#ifdef PCF8563_RTC
+                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found\n")
+#endif
+
+            case CARDKB_ADDR:
+                // Do we have the RAK14006 instead?
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
+                if (registerValue == 0x02) {
+                    // KEYPAD_VERSION
+                    LOG_INFO("RAK14004 found\n");
+                    type = RAK14004;
+                } else {
+                    LOG_INFO("m5 cardKB found\n");
+                    type = CARDKB;
+                }
+                break;
+
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
+#ifdef HAS_NCP5623
+                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
+#endif
+#ifdef HAS_PMU
+                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
+#endif
+            case BME_ADDR:
+            case BME_ADDR_ALTERNATE:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID
+                switch (registerValue) {
+                case 0x61:
+                    LOG_INFO("BME-680 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BME_680;
+                    break;
+                case 0x60:
+                    LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BME_280;
+                    break;
+                default:
+                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BMP_280;
+                }
+                break;
+
+            case INA_ADDR:
+            case INA_ADDR_ALTERNATE:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    LOG_INFO("INA260 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA260;
+                } else { // Assume INA219 if INA260 ID is not found
+                    LOG_INFO("INA219 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA219;
+                }
+                break;
+            case INA3221_ADDR:
+                LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                type = INA3221;
+                break;
+            case MCP9808_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
+                if (registerValue == 0x0400) {
+                    type = MCP9808;
+                    LOG_INFO("MCP9808 sensor found\n");
+                } else {
+                    type = LIS3DH;
+                    LOG_INFO("LIS3DH accelerometer found\n");
+                }
+
+                break;
+
+                SCAN_SIMPLE_CASE(SHT31_ADDR, SHT31, "SHT31 sensor found\n")
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found\n")
+
+            case LPS22HB_ADDR_ALT:
+                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
+
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
+                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
+
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
+                SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+
+            default:
+                LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
+            }
+        } else if (err == 4) {
+            LOG_ERROR("Unknown error at address 0x%x\n", addr);
+        }
+
+        // Check if a type was found for the enumerated device - save, if so
+        if (type != NONE) {
+            deviceAddresses[type] = addr;
+            foundDevices[addr] = type;
+        }
+    }
+}
+
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
+{
+    if (address.port == ScanI2C::I2CPort::WIRE) {
+        return &Wire;
+    } else {
+#ifdef I2C_SDA1
+        return &Wire1;
+#else
+        return &Wire;
+#endif
+    }
+}
+
+size_t ScanI2CTwoWire::countDevices() const
+{
+    return foundDevices.size();
+}

src/detect/ScanI2CTwoWire.h

@@ -0,0 +1,56 @@
+#pragma once
+
+#include <map>
+#include <memory>
+#include <stddef.h>
+#include <stdint.h>
+
+#include <Wire.h>
+
+#include "ScanI2C.h"
+
+#include "../concurrency/Lock.h"
+
+class ScanI2CTwoWire : public ScanI2C
+{
+  public:
+    void scanPort(ScanI2C::I2CPort) override;
+
+    ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
+
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
+    bool exists(ScanI2C::DeviceType) const override;
+
+    size_t countDevices() const override;
+
+  protected:
+    FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
+
+  private:
+    typedef struct RegisterLocation {
+        DeviceAddress i2cAddress;
+        RegisterAddress registerAddress;
+
+        RegisterLocation(DeviceAddress deviceAddress, RegisterAddress registerAddress)
+            : i2cAddress(deviceAddress), registerAddress(registerAddress)
+        {
+        }
+
+    } RegisterLocation;
+
+    typedef uint8_t ResponseWidth;
+
+    std::map<ScanI2C::DeviceAddress, ScanI2C::DeviceType> foundDevices;
+
+    // note: prone to overwriting if multiple devices of a type are added at different addresses (rare?)
+    std::map<ScanI2C::DeviceType, ScanI2C::DeviceAddress> deviceAddresses;
+
+    concurrency::Lock lock;
+
+    void printATECCInfo() const;
+
+    uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
+
+    DeviceType probeOLED(ScanI2C::DeviceAddress) const;
+};

src/detect/einkScan.h

@@ -1,6 +1,6 @@
 #include "../configuration.h"
 
-#ifdef RAK4630
+#ifdef RAK_4631
 #include "../main.h"
 #include <SPI.h>
 
@@ -64,4 +64,4 @@ void scanEInkDevice(void)
         LOG_DEBUG("EInk display not found\n");
     SPI1.end();
 }
-#endif
+#endif

src/detect/i2cScan.h

@@ -1,233 +0,0 @@
-#include "../configuration.h"
-#include "../main.h"
-#include "mesh/generated/meshtastic/telemetry.pb.h"
-#include <Wire.h>
-
-// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
-#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
-#endif
-
-#if HAS_WIRE
-
-void printATECCInfo()
-{
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-    atecc.readConfigZone(false);
-
-    LOG_DEBUG("ATECC608B Serial Number: ");
-    for (int i = 0; i < 9; i++) {
-        LOG_DEBUG("%02x", atecc.serialNumber[i]);
-    }
-
-    LOG_DEBUG(", Rev Number: ");
-    for (int i = 0; i < 4; i++) {
-        LOG_DEBUG("%02x", atecc.revisionNumber[i]);
-    }
-    LOG_DEBUG("\n");
-
-    LOG_DEBUG("ATECC608B Config %s", atecc.configLockStatus ? "Locked" : "Unlocked");
-    LOG_DEBUG(", Data %s", atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
-    LOG_DEBUG(", Slot 0 %s\n", atecc.slot0LockStatus ? "Locked" : "Unlocked");
-
-    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
-        if (atecc.generatePublicKey() == false) {
-            LOG_DEBUG("ATECC608B Error generating public key\n");
-        } else {
-            LOG_DEBUG("ATECC608B Public Key: ");
-            for (int i = 0; i < 64; i++) {
-                LOG_DEBUG("%02x", atecc.publicKey64Bytes[i]);
-            }
-            LOG_DEBUG("\n");
-        }
-    }
-#endif
-}
-
-uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length)
-{
-    uint16_t value = 0x00;
-    Wire.beginTransmission(address);
-    Wire.write(reg);
-    Wire.endTransmission();
-    delay(20);
-    Wire.requestFrom(address, length);
-    LOG_DEBUG("Wire.available() = %d\n", Wire.available());
-    if (Wire.available() == 2) {
-        // Read MSB, then LSB
-        value = (uint16_t)Wire.read() << 8;
-        value |= Wire.read();
-    } else if (Wire.available()) {
-        value = Wire.read();
-    }
-    return value;
-}
-
-uint8_t oled_probe(byte addr)
-{
-    uint8_t r = 0;
-    uint8_t r_prev = 0;
-    uint8_t c = 0;
-    uint8_t o_probe = 0;
-    do {
-        r_prev = r;
-        Wire.beginTransmission(addr);
-        Wire.write(0x00);
-        Wire.endTransmission();
-        Wire.requestFrom((int)addr, 1);
-        if (Wire.available()) {
-            r = Wire.read();
-        }
-        r &= 0x0f;
-
-        if (r == 0x08 || r == 0x00) {
-            o_probe = 2; // SH1106
-        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
-            o_probe = 1; // SSD1306
-        }
-        c++;
-    } while ((r != r_prev) && (c < 4));
-    LOG_DEBUG("0x%x subtype probed in %i tries \n", r, c);
-    return o_probe;
-}
-
-void scanI2Cdevice()
-{
-    byte err, addr;
-    uint16_t registerValue = 0x00;
-    int nDevices = 0;
-    for (addr = 1; addr < 127; addr++) {
-        Wire.beginTransmission(addr);
-        err = Wire.endTransmission();
-        if (err == 0) {
-            LOG_DEBUG("I2C device found at address 0x%x\n", addr);
-
-            nDevices++;
-
-            if (addr == SSD1306_ADDRESS) {
-                screen_found = addr;
-                screen_model = oled_probe(addr);
-                if (screen_model == 1) {
-                    LOG_INFO("ssd1306 display found\n");
-                } else if (screen_model == 2) {
-                    LOG_INFO("sh1106 display found\n");
-                } else {
-                    LOG_INFO("unknown display found\n");
-                }
-            }
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-            if (addr == ATECC608B_ADDR) {
-                keystore_found = addr;
-                if (atecc.begin(keystore_found) == true) {
-                    LOG_INFO("ATECC608B initialized\n");
-                } else {
-                    LOG_WARN("ATECC608B initialization failed\n");
-                }
-                printATECCInfo();
-            }
-#endif
-#ifdef RV3028_RTC
-            if (addr == RV3028_RTC) {
-                rtc_found = addr;
-                LOG_INFO("RV3028 RTC found\n");
-                Melopero_RV3028 rtc;
-                rtc.initI2C();
-                rtc.writeToRegister(0x35, 0x07); // no Clkout
-                rtc.writeToRegister(0x37, 0xB4);
-            }
-#endif
-#ifdef PCF8563_RTC
-            if (addr == PCF8563_RTC) {
-                rtc_found = addr;
-                LOG_INFO("PCF8563 RTC found\n");
-            }
-#endif
-            if (addr == CARDKB_ADDR) {
-                cardkb_found = addr;
-                // Do we have the RAK14006 instead?
-                registerValue = getRegisterValue(addr, 0x04, 1);
-                if (registerValue == 0x02) { // KEYPAD_VERSION
-                    LOG_INFO("RAK14004 found\n");
-                    kb_model = 0x02;
-                } else {
-                    LOG_INFO("m5 cardKB found\n");
-                    kb_model = 0x00;
-                }
-            }
-            if (addr == ST7567_ADDRESS) {
-                screen_found = addr;
-                LOG_INFO("st7567 display found\n");
-            }
-#ifdef HAS_PMU
-            if (addr == XPOWERS_AXP192_AXP2101_ADDRESS) {
-                pmu_found = true;
-                LOG_INFO("axp192/axp2101 PMU found\n");
-            }
-#endif
-            if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {
-                registerValue = getRegisterValue(addr, 0xD0, 1); // GET_ID
-                if (registerValue == 0x61) {
-                    LOG_INFO("BME-680 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BME680] = addr;
-                } else if (registerValue == 0x60) {
-                    LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BME280] = addr;
-                } else {
-                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BMP280] = addr;
-                }
-            }
-            if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {
-                registerValue = getRegisterValue(addr, 0xFE, 2);
-                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
-                if (registerValue == 0x5449) {
-                    LOG_INFO("INA260 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] = addr;
-                } else { // Assume INA219 if INA260 ID is not found
-                    LOG_INFO("INA219 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] = addr;
-                }
-            }
-            if (addr == MCP9808_ADDR) {
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MCP9808] = addr;
-                LOG_INFO("MCP9808 sensor found\n");
-            }
-            if (addr == SHT31_ADDR) {
-                LOG_INFO("SHT31 sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_SHT31] = addr;
-            }
-            if (addr == SHTC3_ADDR) {
-                LOG_INFO("SHTC3 sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_SHTC3] = addr;
-            }
-            if (addr == LPS22HB_ADDR || addr == LPS22HB_ADDR_ALT) {
-                LOG_INFO("LPS22HB sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_LPS22] = addr;
-            }
-
-            // High rate sensors, will be processed internally
-            if (addr == QMC6310_ADDR) {
-                LOG_INFO("QMC6310 Highrate 3-Axis magnetic sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMC6310] = addr;
-            }
-            if (addr == QMI8658_ADDR) {
-                LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMI8658] = addr;
-            }
-            if (addr == QMC5883L_ADDR) {
-                LOG_INFO("QMC5883L Highrate 3-Axis magnetic sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMC5883L] = addr;
-            }
-        } else if (err == 4) {
-            LOG_ERROR("Unknow error at address 0x%x\n", addr);
-        }
-    }
-
-    if (nDevices == 0)
-        LOG_INFO("No I2C devices found\n");
-    else
-        LOG_INFO("%i I2C devices found\n", nDevices);
-}
-#else
-void scanI2Cdevice() {}
-#endif

src/error.h

@@ -9,4 +9,4 @@
 
 /// Record an error that should be reported via analytics
 void recordCriticalError(meshtastic_CriticalErrorCode code = meshtastic_CriticalErrorCode_UNSPECIFIED, uint32_t address = 0,
-                         const char *filename = NULL);
+                         const char *filename = NULL);

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>
@@ -44,4 +44,4 @@ typedef uint32_t BaseType_t;
 
 enum eNotifyAction { eNoAction, eSetValueWithoutOverwrite, eSetValueWithOverwrite };
 
-#endif
+#endif