Platform / dep updates (#2684)

* Update nordic platform

* Update sensor libs

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -32,16 +32,24 @@ body:
       options:
         - Not Applicable
         - T-Beam
+        - T-Beam S3
         - T-Beam 0.7
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
+        - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (WSL2 is required on windows),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -40,11 +40,11 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,59 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -23,9 +26,9 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2-1-1.6
+          - board: tlora-v2-1-1_6
           - board: tbeam
-          - board: heltec-v2.1
+          - board: heltec-v2_1
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
@@ -33,6 +36,9 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          #- board: rak11310
 
     runs-on: ubuntu-latest
     steps:
@@ -42,7 +48,8 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        if: ${{ github.event_name != 'workflow_dispatch' }}
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -56,24 +63,39 @@ jobs:
           - board: tlora-v2
           - board: tlora-v1
           - board: tlora_v1_3
-          - board: tlora-v2-1-1.6
-          - board: tlora-v2-1-1.8
+          - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_8
           - board: tbeam
           - board: heltec-v1
-          - board: heltec-v2.0
-          - board: heltec-v2.1
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: tbeam0.7
+          - board: heltec-v2_0
+          - board: heltec-v2_1
+          - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+          - board: nano-g1-explorer
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-s3:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: heltec-v3
+          - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-paper
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
-    uses: ./.github/workflows/build_esp32.yml
+          - board: t-watch-s3
+          - board: t-deck
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
@@ -85,9 +107,11 @@ jobs:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
@@ -99,6 +123,7 @@ jobs:
       matrix:
         include:
           - board: pico
+          - board: rak11310
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
@@ -137,12 +162,14 @@ jobs:
             release/device-*.bat
 
       - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
       - name: Docker build and push tagged versions
@@ -155,7 +182,7 @@ jobs:
           tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
 
       - name: Docker build and push
-        if: github.ref == 'refs/heads/master'
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/build-push-action@v3
         with:
           context: .
@@ -175,7 +202,8 @@ jobs:
 
   gather-artifacts:
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
+    needs:
+      [build-esp32, build-esp32-s3, build-nrf52, build-native, build-rpi2040]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -192,7 +220,7 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -231,8 +259,9 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v1.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
@@ -290,7 +319,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...

.github/workflows/nightly.yml

@@ -14,6 +14,6 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}

.gitignore

@@ -30,3 +30,4 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
+/compile_commands.json

.trunk/.gitignore

@@ -5,3 +5,4 @@
 plugins
 user_trunk.yaml
 user.yaml
+shims

.trunk/configs/.flake8

@@ -0,0 +1,3 @@
+# Autoformatter friendly flake8 config (all formatting rules disabled)
+[flake8]
+extend-ignore = D1, D2, E1, E2, E3, E501, W1, W2, W3, W5

.trunk/configs/.isort.cfg

@@ -0,0 +1,2 @@
+[settings]
+profile=black

.trunk/configs/.yamllint.yaml

@@ -0,0 +1,10 @@
+rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed: ["{|}"]
+  empty-values:
+    forbid-in-block-mappings: true
+    forbid-in-flow-mappings: true
+  key-duplicates: {}
+  octal-values:
+    forbid-implicit-octal: true

.trunk/configs/ruff.toml

@@ -0,0 +1,5 @@
+# Generic, formatter-friendly config.
+select = ["B", "D3", "D4", "E", "F"]
+
+# Never enforce `E501` (line length violations). This should be handled by formatters.
+ignore = ["E501"]

.trunk/trunk.yaml

@@ -1,28 +1,43 @@
 version: 0.1
 cli:
-  version: 1.3.1
+  version: 1.9.1
 plugins:
   sources:
     - id: trunk
-      ref: v0.0.8
+      ref: v0.0.17
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
+    - taplo@0.7.0
+    - ruff@0.0.265
+    - yamllint@1.31.0
+    - isort@5.12.0
+    - markdownlint@0.34.0
+    - oxipng@8.0.0
+    - svgo@3.0.2
+    - actionlint@1.6.24
+    - flake8@6.0.0
+    - hadolint@2.12.0
+    - shfmt@3.5.0
+    - shellcheck@0.9.0
+    - black@23.3.0
     - git-diff-check
-    - gitleaks@8.15.2
+    - gitleaks@8.16.3
     - clang-format@14.0.0
-    - prettier@2.8.3
+    - prettier@2.8.8
   disabled:
+    - taplo@0.7.0
     - shellcheck@0.9.0
     - shfmt@3.5.0
     - oxipng@8.0.0
     - actionlint@1.6.22
-    - markdownlint@0.33.0
+    - markdownlint@0.34.0
     - hadolint@2.12.0
     - svgo@3.0.2
 runtimes:
   enabled:
-    - go@1.18.3
+    - python@3.10.8
+    - go@1.19.5
     - node@18.12.1
 actions:
   disabled:

.vscode/extensions.json

@@ -6,4 +6,4 @@
         "platformio.platformio-ide",
         "trunk.io"
     ],
-}
+}

.vscode/settings.json

@@ -1,4 +1,5 @@
 {
   "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true
 }

arch/esp32/esp32.ini

@@ -1,12 +1,15 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+platform = platformio/espressif32@^6.3.2
+
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
+
 board_build.filesystem = littlefs
 
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@@ -25,8 +28,9 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
+  ;-DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
@@ -34,8 +38,9 @@ lib_deps =
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
+  jgromes/RadioLib@^6.1.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 
 lib_ignore = 
   segger_rtt
@@ -51,4 +56,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -0,0 +1,5 @@
+[esp32c3_base]
+extends = esp32_base
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -1,47 +1,16 @@
 [esp32s2_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+extends = esp32_base
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
-upload_speed = 961200
+  ${esp32_base.build_src_filter} -<nimble/>
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
 
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
-  -DDEBUG_HEAP
   
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
 lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
 

arch/esp32/esp32s3.ini

@@ -1,47 +1,5 @@
 [esp32s3_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
 

arch/nrf52/nrf52.ini

@@ -1,18 +1,21 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.4.0
-
+platform = platformio/nordicnrf52@^10.1.0
 extends = arduino_base
+
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
   -Isrc/platform/nrf52
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+  jgromes/RadioLib@^6.1.0
+
 lib_ignore =
-  BluetoothOTA
-  
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832  
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,14 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
+
 build_flags = ${nrf52_base.build_flags} 
+
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-

arch/portduino/portduino.ini

@@ -1,7 +1,8 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#489ff929dca0bb768256ba2de45f95815111490f
 framework = arduino
+
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -12,10 +13,18 @@ build_src_filter =
   -<mesh/http/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
+
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino
+  jgromes/RadioLib@6.1.0
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino

arch/rp2040/rp2040.ini

@@ -1,9 +1,9 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#20c7dbfcfe6677c5305fa28ecf5e3870321cb157
-platform_packages = 
-  earlephilhower/toolchain-rp2040-earlephilhower@^5.100300.221223
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#0c33219f53faa035e188925ea1324f472e8b93d2
 extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.2.2
+
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
@@ -12,10 +12,13 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+
 lib_ignore =
   BluetoothOTA
+
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  jgromes/RadioLib@^6.1.0
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

arch/stm32/stm32wl5e.ini

@@ -1,18 +1,29 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
+
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
-  -DHAL_SUBGHZ_MODULE_ENABLED
-#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
-#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
 lib_deps =
   ${env.lib_deps}
+  jgromes/RadioLib@^6.1.0
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-lib_ignore = 
-  mathertel/OneButton@^2.0.3
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  https://github.com/mathertel/OneButton#2.1.0

bin/build-esp32.sh

@@ -34,7 +34,7 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment tbeam -t buildfs
-cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/device-install.bat

@@ -30,7 +30,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
-	%PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+    
+    @REM Account for S3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    )
     for %%f in (littlefs-*.bin) do (
         %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )

bin/device-install.sh

@@ -49,7 +49,12 @@ if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
-    "$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	# Account for S3 board's different OTA partition
+	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
+		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	else
+	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin
+	fi
 	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
 
 else

bin/generate_ci_matrix.py

@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+"""Generate the CI matrix"""
+
+import configparser
+import json
+import os
+import sys
+
+rootdir = "variants/"
+
+options = sys.argv[1:]
+
+outlist = []
+
+if len(options) < 1:
+    print(json.dumps(outlist))
+    exit()
+
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if config[config[c].name]["extends"] == options[0] + "_base":
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+
+print(json.dumps(outlist))

bin/readprops.py

@@ -22,9 +22,9 @@ def readProps(prefsLoc):
         isDirty = subprocess.check_output(
             ['git', 'diff', 'HEAD']).decode("utf-8").strip()
         suffix = sha
-        if isDirty:
-            # short for 'dirty', we want to keep our verstrings source for protobuf reasons
-            suffix = sha + "-d"
+        # if isDirty:
+        #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+        #     suffix = sha + "-d"
         verObj['long'] = "{}.{}.{}.{}".format(
             version["major"], version["minor"], version["build"], suffix)
     except:

bin/regen-protos.bat

@@ -1,5 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
-
-@REM cd ../src/mesh/generated/meshtastic
-@REM sed -i 's/#include "meshtastic/#include "./g' *
-@REM sed -i 's/meshtastic_//g' *
+cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -8,7 +8,7 @@ echo "prebuilt binaries for your computer into nanopb-0.4.7"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
 
 # cd ../src/mesh/generated/meshtastic
 # sed -i 's/#include "meshtastic/#include "./g' -- *

boards/bpi_picow_esp32_s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "bpi_picow_esp32_s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BPI-PicoW-S3 (8 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.banana-pi.org/BPI-PicoW-S3",
+  "vendor": "BPI"
+}

boards/generic_wl5e.json

@@ -20,7 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": ["cmsis-dap"]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/my-esp32s3-diy-oled.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my-esp32s3-diy-oled"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/my_esp32s3_diy_eink.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my_esp32s3_diy_eink"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/t-deck.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -7,7 +7,10 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x002A"]
+    ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "t-echo",

boards/t-watch-s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0X303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.lilygo.cn/",
+  "vendor": "LilyGo"
+}

boards/tlora-t3s3-v1.json

@@ -9,12 +9,13 @@
       "-DARDUINO_USB_CDC_ON_BOOT=1",
       "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

boards/xiao_ble_sense.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

monitor/filter_c3_exception_decoder.py

@@ -0,0 +1,155 @@
+# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import re
+import subprocess
+import sys
+
+from platformio.project.exception import PlatformioException
+from platformio.public import (
+    DeviceMonitorFilterBase,
+    load_build_metadata,
+)
+
+# By design, __init__ is called inside miniterm and we can't pass context to it.
+# pylint: disable=attribute-defined-outside-init
+
+IS_WINDOWS = sys.platform.startswith("win")
+
+
+class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
+    NAME = "esp32_c3_exception_decoder"
+
+    PCADDR_PATTERN = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
+
+    def __call__(self):
+        self.buffer = ""
+        self.pcaddr_re = self.PCADDR_PATTERN
+
+        self.firmware_path = None
+        self.addr2line_path = None
+        self.enabled = self.setup_paths()
+
+        if self.config.get("env:" + self.environment, "build_type") != "debug":
+            print(
+                """
+Please build project in debug configuration to get more details about an exception.
+See https://docs.platformio.org/page/projectconf/build_configurations.html
+
+"""
+            )
+
+        return self
+
+    def setup_paths(self):
+        self.project_dir = os.path.abspath(self.project_dir)
+        try:
+            data = load_build_metadata(self.project_dir, self.environment)
+            self.firmware_path = data["prog_path"]
+            if not os.path.isfile(self.firmware_path):
+                sys.stderr.write(
+                    "%s: disabling, firmware at %s does not exist, rebuild the project?\n"
+                    % (self.__class__.__name__, self.firmware_path)
+                )
+                return False
+
+            if self.addr2line_path is None:
+                cc_path = data.get("cc_path", "")
+                if "-gcc" in cc_path:
+                    self.addr2line_path = cc_path.replace("-gcc", "-addr2line")
+                else:
+                    sys.stderr.write(
+                        "%s: disabling, failed to find addr2line.\n"
+                        % self.__class__.__name__
+                    )
+                    return False
+                
+            if not os.path.isfile(self.addr2line_path):
+                sys.stderr.write(
+                    "%s: disabling, addr2line at %s does not exist\n"
+                    % (self.__class__.__name__, self.addr2line_path)
+                )
+                return False
+                
+            return True
+        except PlatformioException as e:
+            sys.stderr.write(
+                "%s: disabling, exception while looking for addr2line: %s\n"
+                % (self.__class__.__name__, e)
+            )
+            return False
+
+    def rx(self, text):
+        if not self.enabled:
+            return text
+
+        last = 0
+        while True:
+            idx = text.find("\n", last)
+            if idx == -1:
+                if len(self.buffer) < 4096:
+                    self.buffer += text[last:]
+                break
+
+            line = text[last:idx]
+            if self.buffer:
+                line = self.buffer + line
+                self.buffer = ""
+            last = idx + 1
+
+            # Output each trace on a separate line below ours
+            # Logic identical to https://github.com/espressif/esp-idf/blob/master/tools/idf_monitor_base/logger.py#L131
+            for m in re.finditer(self.pcaddr_re, line):
+                if m is None:
+                    continue
+
+                trace = self.get_backtrace(m)
+                if len(trace) != "":
+                    text = text[: last] + trace + text[last :]
+                    last += len(trace)
+
+        return text
+
+    def get_backtrace(self, match):
+        trace = "\n"
+        enc = "mbcs" if IS_WINDOWS else "utf-8"
+        args = [self.addr2line_path, u"-fipC", u"-e", self.firmware_path]
+        try:
+            addr = match.group()
+            output = (
+                subprocess.check_output(args + [addr])
+                .decode(enc)
+                .strip()
+            )
+            output = output.replace(
+                "\n", "\n     "
+            )  # newlines happen with inlined methods
+            output = self.strip_project_dir(output)
+            # Output the trace in yellow color so that it is easier to spot
+            trace += "\033[33m=> %s: %s\033[0m\n" % (addr, output)
+        except subprocess.CalledProcessError as e:
+            sys.stderr.write(
+                "%s: failed to call %s: %s\n"
+                % (self.__class__.__name__, self.addr2line_path, e)
+            )
+        return trace
+
+    def strip_project_dir(self, trace):
+        while True:
+            idx = trace.find(self.project_dir)
+            if idx == -1:
+                break
+            trace = trace[:idx] + trace[idx + len(self.project_dir) + 1 :]
+        return trace

platformio.ini

@@ -7,12 +7,14 @@
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
-;default_envs = heltec-v2.0
-;default_envs = heltec-v2.1
+;default_envs = heltec-v2_0
+;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1.6
+;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = nrf52840dk-geeksville
@@ -20,17 +22,18 @@
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-diy-v1_1
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
-extra_scripts = bin/platformio-custom.py 
+extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
@@ -38,8 +41,8 @@ extra_scripts = bin/platformio-custom.py
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format 
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
+  -Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
@@ -54,19 +57,23 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#da1ede4dfcd91074283b029080759fd744120909 ; ESP8266_SSD1306 
-  mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
+  https://github.com/mathertel/OneButton#2.1.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
-  nanopb/Nanopb@^0.4.6
+  nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
-;  jgromes/RadioLib@^5.5.1
-  https://github.com/jgromes/RadioLib.git#7a25b27c3183ffe3627c5c221243c378d8951da7
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -81,31 +88,37 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
+  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
-  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#52b5282639d08a8cbd4b748363089eed6102dc76
+  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
 build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
-; Common libs for communicating over TCP/IP networks such as MQTT 
+; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
   arduino-libraries/NTPClient@^3.1.0
+  arcao/Syslog@^2.0.0
 
-; Common libs for environmental measurements in telemetry module 
+; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.4
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BME680 Library@^2.0.1
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
+  adafruit/Adafruit MPU6050@^2.2.4
+  adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/BMA423_Library@^0.0.1

src/AccelerometerThread.h

@@ -0,0 +1,174 @@
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <Wire.h>
+#include <bma.h>
+
+BMA423 bmaSensor;
+bool BMA_IRQ = false;
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+namespace concurrency
+{
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    AccelerometerThread(ScanI2C::DeviceType type = ScanI2C::DeviceType::NONE) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+
+        acceleremoter_type = type;
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            Acfg cfg;
+            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
+            cfg.range = BMA4_ACCEL_RANGE_2G;
+            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
+            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
+            bmaSensor.setAccelConfig(cfg);
+            bmaSensor.enableAccel();
+
+            struct bma4_int_pin_config pin_config;
+            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
+            pin_config.lvl = BMA4_ACTIVE_HIGH;
+            pin_config.od = BMA4_PUSH_PULL;
+            pin_config.output_en = BMA4_OUTPUT_ENABLE;
+            pin_config.input_en = BMA4_INPUT_DISABLE;
+            // The correct trigger interrupt needs to be configured as needed
+            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+            struct bma423_axes_remap remap_data;
+            remap_data.x_axis = 0;
+            remap_data.x_axis_sign = 1;
+            remap_data.y_axis = 1;
+            remap_data.y_axis_sign = 0;
+            remap_data.z_axis = 2;
+            remap_data.z_axis_sign = 1;
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setRemapAxes(&remap_data);
+            // sensor.enableFeature(BMA423_STEP_CNTR, true);
+            bmaSensor.enableFeature(BMA423_TILT, true);
+            bmaSensor.enableFeature(BMA423_WAKEUP, true);
+            // sensor.resetStepCounter();
+
+            // Turn on feature interrupt
+            bmaSensor.enableStepCountInterrupt();
+            bmaSensor.enableTiltInterrupt();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupInterrupt();
+        }
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+                wakeScreen();
+                return 500;
+            }
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+};
+
+} // namespace concurrency

src/BluetoothCommon.h

@@ -17,4 +17,14 @@
 extern const uint8_t MESH_SERVICE_UUID_16[], TORADIO_UUID_16[16u], FROMRADIO_UUID_16[], FROMNUM_UUID_16[];
 
 /// Given a level between 0-100, update the BLE attribute
-void updateBatteryLevel(uint8_t level);
+void updateBatteryLevel(uint8_t level);
+
+class BluetoothApi
+{
+  public:
+    virtual void setup();
+    virtual void shutdown();
+    virtual void clearBonds();
+    virtual bool isConnected();
+    virtual int getRssi() = 0;
+};

src/ButtonThread.h

@@ -4,6 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "main.h"
 #include "power.h"
 #include <OneButton.h>
 
@@ -45,19 +46,19 @@ class ButtonThread : public concurrency::OSThread
     ButtonThread() : OSThread("Button")
     {
 #ifdef BUTTON_PIN
-        userButton = OneButton(BUTTON_PIN, true, true);
+        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
 #ifdef INPUT_PULLUP_SENSE
         // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
+        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
-        userButton.setClickTicks(300);
+        userButton.setClickMs(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
         userButton.attachLongPressStart(userButtonPressedLongStart);
         userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN, FALLING);
+        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
@@ -98,10 +99,10 @@ class ButtonThread : public concurrency::OSThread
         userButtonTouch.tick();
         canSleep &= userButtonTouch.isIdle();
 #endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
+        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
         // else LOG_DEBUG("sleep ok\n");
 
-        return 5;
+        return 50;
     }
 
   private:
@@ -115,7 +116,9 @@ class ButtonThread : public concurrency::OSThread
     {
         // LOG_DEBUG("press!\n");
 #ifdef BUTTON_PIN
-        if ((BUTTON_PIN != moduleConfig.canned_message.inputbroker_pin_press) || !moduleConfig.canned_message.enabled) {
+        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+             moduleConfig.canned_message.inputbroker_pin_press) ||
+            !moduleConfig.canned_message.enabled) {
             powerFSM.trigger(EVENT_PRESS);
         }
 #endif
@@ -123,17 +126,9 @@ class ButtonThread : public concurrency::OSThread
     static void userButtonPressedLong()
     {
         // LOG_DEBUG("Long press!\n");
-#ifdef ARCH_ESP32
-        screen->adjustBrightness();
-#endif
         // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
-#ifdef HAS_PMU
-            if (pmu_found == true) {
-                setLed(false);
-                power->shutdown();
-            }
-#elif defined(ARCH_NRF52)
+        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
             // Do actual shutdown when button released, otherwise the button release
             // may wake the board immediatedly.
             if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
@@ -163,7 +158,7 @@ class ButtonThread : public concurrency::OSThread
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
         screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
+        service.refreshLocalMeshNode();
         service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
@@ -202,4 +197,4 @@ class ButtonThread : public concurrency::OSThread
     }
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/DebugConfiguration.cpp

@@ -0,0 +1,172 @@
+/* based on https://github.com/arcao/Syslog
+
+MIT License
+
+Copyright (c) 2016 Martin Sloup
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.*/
+
+#include "configuration.h"
+
+#include "DebugConfiguration.h"
+
+#if HAS_WIFI || HAS_ETHERNET
+
+Syslog::Syslog(UDP &client)
+{
+    this->_client = &client;
+    this->_server = NULL;
+    this->_port = 0;
+    this->_deviceHostname = SYSLOG_NILVALUE;
+    this->_appName = SYSLOG_NILVALUE;
+    this->_priDefault = LOGLEVEL_KERN;
+}
+
+Syslog &Syslog::server(const char *server, uint16_t port)
+{
+    if (this->_ip.fromString(server)) {
+        this->_server = NULL;
+    } else {
+        this->_server = server;
+    }
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::server(IPAddress ip, uint16_t port)
+{
+    this->_ip = ip;
+    this->_server = NULL;
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::deviceHostname(const char *deviceHostname)
+{
+    this->_deviceHostname = (deviceHostname == NULL) ? SYSLOG_NILVALUE : deviceHostname;
+    return *this;
+}
+
+Syslog &Syslog::appName(const char *appName)
+{
+    this->_appName = (appName == NULL) ? SYSLOG_NILVALUE : appName;
+    return *this;
+}
+
+Syslog &Syslog::defaultPriority(uint16_t pri)
+{
+    this->_priDefault = pri;
+    return *this;
+}
+
+Syslog &Syslog::logMask(uint8_t priMask)
+{
+    this->_priMask = priMask;
+    return *this;
+}
+
+void Syslog::enable()
+{
+    this->_enabled = true;
+}
+
+void Syslog::disable()
+{
+    this->_enabled = false;
+}
+
+bool Syslog::isEnabled()
+{
+    return this->_enabled;
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *fmt, va_list args)
+{
+    return this->vlogf(pri, this->_appName, fmt, args);
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args)
+{
+    char *message;
+    size_t initialLen;
+    size_t len;
+    bool result;
+
+    initialLen = strlen(fmt);
+
+    message = new char[initialLen + 1];
+
+    len = vsnprintf(message, initialLen + 1, fmt, args);
+    if (len > initialLen) {
+        delete[] message;
+        message = new char[len + 1];
+
+        vsnprintf(message, len + 1, fmt, args);
+    }
+
+    result = this->_sendLog(pri, appName, message);
+
+    delete[] message;
+    return result;
+}
+
+inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *message)
+{
+    int result;
+
+    if (!this->_enabled)
+        return false;
+
+    if ((this->_server == NULL && this->_ip == INADDR_NONE) || this->_port == 0)
+        return false;
+
+    // Check priority against priMask values.
+    if ((LOG_MASK(LOG_PRI(pri)) & this->_priMask) == 0)
+        return true;
+
+    // Set default facility if none specified.
+    if ((pri & LOG_FACMASK) == 0)
+        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
+
+    if (this->_server != NULL) {
+        result = this->_client->beginPacket(this->_server, this->_port);
+    } else {
+        result = this->_client->beginPacket(this->_ip, this->_port);
+    }
+
+    if (result != 1)
+        return false;
+
+    this->_client->print('<');
+    this->_client->print(pri);
+    this->_client->print(F(">1 - "));
+    this->_client->print(this->_deviceHostname);
+    this->_client->print(' ');
+    this->_client->print(appName);
+    this->_client->print(F(" - - - \xEF\xBB\xBF"));
+    this->_client->print(F("["));
+    this->_client->print(int(millis() / 1000));
+    this->_client->print(F("]: "));
+    this->_client->print(message);
+    this->_client->endPacket();
+
+    return true;
+}
+
+#endif

src/DebugConfiguration.h

@@ -1,3 +1,6 @@
+#ifndef SYSLOG_H
+#define SYSLOG_H
+
 // DEBUG LED
 #ifndef LED_INVERTED
 #define LED_INVERTED 0 // define as 1 if LED is active low (on)
@@ -17,6 +20,7 @@
 #define MESHTASTIC_LOG_LEVEL_INFO "INFO "
 #define MESHTASTIC_LOG_LEVEL_WARN "WARN "
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
+#define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
 
 #include "SerialConsole.h"
@@ -24,25 +28,77 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
+#define DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_ERROR(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
 #ifdef DEBUG_PORT
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
 #define LOG_ERROR(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_ERROR, __VA_ARGS__)
-#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_TRACE, __VA_ARGS__)
+#define LOG_CRIT(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_CRIT, __VA_ARGS__)
+#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_TRACE, __VA_ARGS__)
 #else
 #define LOG_DEBUG(...)
 #define LOG_INFO(...)
 #define LOG_WARN(...)
 #define LOG_ERROR(...)
+#define LOG_CRIT(...)
+#define LOG_TRACE(...)
 #endif
 #endif
 
+#define SYSLOG_NILVALUE "-"
+
+#define SYSLOG_CRIT 2  /* critical conditions */
+#define SYSLOG_ERR 3   /* error conditions */
+#define SYSLOG_WARN 4  /* warning conditions */
+#define SYSLOG_INFO 6  /* informational */
+#define SYSLOG_DEBUG 7 /* debug-level messages */
+// trace does not go out to syslog (yet?)
+
+#define LOG_PRIMASK 0x07 /* mask to extract priority part (internal) */
+                         /* extract priority */
+#define LOG_PRI(p) ((p)&LOG_PRIMASK)
+#define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri))
+
+/* facility codes */
+#define LOGLEVEL_KERN (0 << 3)      /* kernel messages */
+#define LOGLEVEL_USER (1 << 3)      /* random user-level messages */
+#define LOGLEVEL_MAIL (2 << 3)      /* mail system */
+#define LOGLEVEL_DAEMON (3 << 3)    /* system daemons */
+#define LOGLEVEL_AUTH (4 << 3)      /* security/authorization messages */
+#define LOGLEVEL_SYSLOG (5 << 3)    /* messages generated internally by syslogd */
+#define LOGLEVEL_LPR (6 << 3)       /* line printer subsystem */
+#define LOGLEVEL_NEWS (7 << 3)      /* network news subsystem */
+#define LOGLEVEL_UUCP (8 << 3)      /* UUCP subsystem */
+#define LOGLEVEL_CRON (9 << 3)      /* clock daemon */
+#define LOGLEVEL_AUTHPRIV (10 << 3) /* security/authorization messages (private) */
+#define LOGLEVEL_FTP (11 << 3)      /* ftp daemon */
+
+/* other codes through 15 reserved for system use */
+#define LOGLEVEL_LOCAL0 (16 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL1 (17 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL2 (18 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL3 (19 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL4 (20 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL5 (21 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL6 (22 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL7 (23 << 3) /* reserved for local use */
+
+#define LOG_NFACILITIES 24 /* current number of facilities */
+#define LOG_FACMASK 0x03f8 /* mask to extract facility part */
+                           /* facility of pri */
+#define LOG_FAC(p) (((p)&LOG_FACMASK) >> 3)
+
+#define LOG_MASK(pri) (1 << (pri))             /* mask for one priority */
+#define LOG_UPTO(pri) ((1 << ((pri) + 1)) - 1) /* all priorities through pri */
+
 // -----------------------------------------------------------------------------
 // AXP192 (Rev1-specific options)
 // -----------------------------------------------------------------------------
@@ -52,3 +108,50 @@
 
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
+
+#if HAS_ETHERNET
+#include <RAK13800_W5100S.h>
+#endif // HAS_ETHERNET
+
+#if HAS_WIFI
+#include <WiFi.h>
+#endif // HAS_WIFI
+
+#if HAS_WIFI || HAS_ETHERNET
+
+class Syslog
+{
+  private:
+    UDP *_client;
+    IPAddress _ip;
+    const char *_server;
+    uint16_t _port;
+    const char *_deviceHostname;
+    const char *_appName;
+    uint16_t _priDefault;
+    uint8_t _priMask = 0xff;
+    bool _enabled = false;
+
+    bool _sendLog(uint16_t pri, const char *appName, const char *message);
+
+  public:
+    explicit Syslog(UDP &client);
+
+    Syslog &server(const char *server, uint16_t port);
+    Syslog &server(IPAddress ip, uint16_t port);
+    Syslog &deviceHostname(const char *deviceHostname);
+    Syslog &appName(const char *appName);
+    Syslog &defaultPriority(uint16_t pri = LOGLEVEL_KERN);
+    Syslog &logMask(uint8_t priMask);
+
+    void enable();
+    void disable();
+    bool isEnabled();
+
+    bool vlogf(uint16_t pri, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+    bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+};
+
+#endif // HAS_ETHERNET || HAS_WIFI
+
+#endif // SYSLOG_H

src/FSCommon.cpp

@@ -1,3 +1,13 @@
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
 #include "configuration.h"
 
@@ -8,10 +18,19 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
 #endif // HAS_SDCARD
 
+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
 bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
@@ -34,12 +53,21 @@ bool copyFile(const char *from, const char *to)
         f2.write(cbuffer, i);
     }
 
+    f2.flush();
     f2.close();
     f1.close();
     return true;
 #endif
 }
 
+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
@@ -56,7 +84,14 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }
 
-void listDir(const char *dirname, uint8_t levels, boolean del = false)
+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -151,6 +186,13 @@ void listDir(const char *dirname, uint8_t levels, boolean del = false)
 #endif
 }
 
+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
@@ -179,6 +221,9 @@ void fsInit()
 #endif
 }
 
+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
@@ -209,4 +254,4 @@ void setupSDCard()
     LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
     LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
-}
+}

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -42,6 +49,6 @@ using namespace Adafruit_LittleFS_Namespace;
 void fsInit();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
-void listDir(const char *dirname, uint8_t levels, boolean del);
+void listDir(const char *dirname, uint8_t levels, bool del);
 void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -55,7 +55,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +68,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,7 +81,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
@@ -106,7 +106,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -138,8 +138,9 @@ class GPSStatus : public Status
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
-            } else
+            } else {
                 LOG_DEBUG("No GPS lock\n");
+            }
             onNewStatus.notifyObservers(this);
         }
         return 0;
@@ -148,4 +149,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/OSTimer.cpp

@@ -5,7 +5,8 @@
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
     (*tCallback)(tParam1, tParam2);
 }
 
+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
     if (!timer) {

src/Power.cpp

@@ -1,3 +1,15 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
@@ -7,14 +19,50 @@
 #include "sleep.h"
 #include "utils.h"
 
+#ifdef DEBUG_HEAP_MQTT
+#include "mqtt/MQTT.h"
+#include "target_specific.h"
+#include <WiFi.h>
+#endif
+
+#ifndef DELAY_FOREVER
+#define DELAY_FOREVER portMAX_DELAY
+#endif
+
+#if defined(BATTERY_PIN) && defined(ARCH_ESP32)
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
+static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_1;
+#else // ADC2
+static const adc2_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_2;
+RTC_NOINIT_ATTR uint64_t RTC_reg_b;
+
+#endif // BAT_MEASURE_ADC_UNIT
+
+esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+#ifndef ADC_ATTENUATION
+static const adc_atten_t atten = ADC_ATTEN_DB_11;
+#else
+static const adc_atten_t atten = ADC_ATTENUATION;
+#endif
+#endif // BATTERY_PIN && ARCH_ESP32
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+#endif
+
 #ifdef HAS_PMU
 #include "XPowersAXP192.tpp"
 #include "XPowersAXP2101.tpp"
 #include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -98,6 +146,13 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
@@ -118,18 +173,41 @@ class AnalogBatteryLevel : public HasBatteryLevel
             // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
             // environment.
             uint32_t raw = 0;
+#ifdef ARCH_ESP32
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                raw += adc1_get_raw(adc_channel);
+            }
+#else  // ADC2
+            int32_t adc_buf = 0;
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                // ADC2 wifi bug workaround, see
+                // https://github.com/espressif/arduino-esp32/issues/102
+                WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+                SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+                adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+                raw += adc_buf;
+            }
+#endif // BAT_MEASURE_ADC_UNIT
+#else  // !ARCH_ESP32
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
+#endif
             raw = raw / BATTERY_SENSE_SAMPLES;
-
             float scaled;
+#ifdef ARCH_ESP32
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else
 #ifndef VBAT_RAW_TO_SCALED
             scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
 #else
             scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+#endif // VBAT RAW TO SCALED
+#endif // ARCH_ESP32
+       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+
             last_read_value = scaled;
             return scaled;
         } else {
@@ -137,7 +215,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #else
         return 0;
-#endif
+#endif // BATTERY_PIN
     }
 
     /**
@@ -150,8 +228,18 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
+    /// On some boards we don't have the power management chip (like AXPxxxx)
+    /// so we use EXT_PWR_DETECT GPIO pin to detect external power source
     virtual bool isVbusIn() override
     {
+#ifdef EXT_PWR_DETECT
+        // if external powered that pin will be pulled up
+        if (digitalRead(EXT_PWR_DETECT) == HIGH) {
+            return true;
+        }
+        // if it's not HIGH - check the battery
+#endif
+
         return getBattVoltage() > chargingVolt;
     }
 
@@ -183,6 +271,35 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] == config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -192,37 +309,68 @@ Power::Power() : OSThread("Power")
     statusHandler = {};
     low_voltage_counter = 0;
 #ifdef DEBUG_HEAP
-    lastheap = ESP.getFreeHeap();
+    lastheap = memGet.getFreeHeap();
 #endif
 }
 
 bool Power::analogInit()
 {
+#ifdef EXT_PWR_DETECT
+    pinMode(EXT_PWR_DETECT, INPUT);
+#endif
+
 #ifdef BATTERY_PIN
     LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifdef ARCH_ESP32
-    // ESP32 needs special analog stuff
-    adcAttachPin(BATTERY_PIN);
+#ifndef BATTERY_SENSE_RESOLUTION_BITS
+#define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
+
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+
+#ifndef ADC_WIDTH // max resolution by default
+    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
+#else
+    static const adc_bits_width_t width = ADC_WIDTH;
+#endif
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+    adc1_config_width(width);
+    adc1_config_channel_atten(adc_channel, atten);
+#else // ADC2
+    adc2_config_channel_atten(adc_channel, atten);
+    // ADC2 wifi bug workaround
+    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
+    // calibrate ADC
+    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
+    // show ADC characterization base
+    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+    } else {
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+    }
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
+    pinMode(37, OUTPUT); // needed for P channel mosfet to work
+    digitalWrite(37, LOW);
+#endif
+#endif // ARCH_ESP32
+
 #ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-#endif
-
-#ifndef BATTERY_SENSE_RESOLUTION_BITS
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#endif
-
-    // adcStart(BATTERY_PIN);
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
                                                          // depending on needed resolution.
+
+#endif // ARCH_NRF52
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -230,6 +378,11 @@ bool Power::analogInit()
 #endif
 }
 
+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
     bool found = axpChipInit();
@@ -250,16 +403,23 @@ void Power::shutdown()
     digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
 #endif
 
-#ifdef HAS_PMU
     LOG_INFO("Shutting down\n");
-    if (PMU) {
+
+#ifdef HAS_PMU
+    if (pmu_found == true) {
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
         PMU->shutdown();
     }
-#elif defined(ARCH_NRF52)
-    playBeep();
+#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#ifdef PIN_LED1
     ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2
     ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3
+    ledOff(PIN_LED2);
+#endif
     doDeepSleep(DELAY_FOREVER);
 #endif
 }
@@ -271,7 +431,7 @@ void Power::readPowerStatus()
 {
     if (batteryLevel) {
         bool hasBattery = batteryLevel->isBatteryConnect();
-        int batteryVoltageMv = 0;
+        uint32_t batteryVoltageMv = 0;
         int8_t batteryChargePercent = 0;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
@@ -296,7 +456,7 @@ void Power::readPowerStatus()
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
-        if (lastheap != ESP.getFreeHeap()) {
+        if (lastheap != memGet.getFreeHeap()) {
             LOG_DEBUG("Threads running:");
             int running = 0;
             for (int i = 0; i < MAX_THREADS; i++) {
@@ -307,33 +467,52 @@ void Power::readPowerStatus()
                 }
             }
             LOG_DEBUG("\n");
-            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", ESP.getFreeHeap(), ESP.getHeapSize(),
-                      ESP.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
-            lastheap = ESP.getFreeHeap();
+            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+                      memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+            lastheap = memGet.getFreeHeap();
+        }
+#ifdef DEBUG_HEAP_MQTT
+        if (mqtt) {
+            // send MQTT-Packet with Heap-Size
+            uint8_t dmac[6];
+            getMacAddr(dmac); // Get our hardware ID
+            char mac[18];
+            sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
+
+            auto newHeap = memGet.getFreeHeap();
+            std::string heapTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+            std::string heapString = std::to_string(newHeap);
+            mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+            auto wifiRSSI = WiFi.RSSI();
+            std::string wifiTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+            std::string wifiString = std::to_string(wifiRSSI);
+            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
         }
 #endif
 
-// If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
-// Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef ARCH_NRF52
+#endif
+
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
+        // a row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                LOG_DEBUG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
                     // We can't trigger deep sleep on NRF52, it's freezing the board
-                    // powerFSM.trigger(EVENT_LOW_BATTERY);
                     LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+#else
+                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                    powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
                 }
             } else {
                 low_voltage_counter = 0;
             }
         }
-#else
-        // If we have a battery at all and it is less than 10% full, force deep sleep
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB() && batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS)
-            powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
     } else {
         // No power sensing on this board - tell everyone else we have no idea what is happening
         const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
@@ -378,10 +557,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -394,10 +575,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the axp192
- share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
- 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -487,52 +668,90 @@ bool Power::axpChipInit()
 
         // Set up the charging voltage
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
-        // t-beam s3 core
+        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // Unuse power channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_ALDO1);
+            PMU->disablePowerOutput(XPOWERS_ALDO4);
+            PMU->disablePowerOutput(XPOWERS_BLDO1);
+            PMU->disablePowerOutput(XPOWERS_BLDO2);
+            PMU->disablePowerOutput(XPOWERS_DLDO1);
+            PMU->disablePowerOutput(XPOWERS_DLDO2);
 
-        /**
-         * gnss module power channel
-         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO4);
+            // GNSS RTC PowerVDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
 
-        // lora radio power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // ESP32 VDD 3300mV
+            //  ! No need to set, automatically open , Don't close it
+            //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+            //  PMU->setProtectedChannel(XPOWERS_DCDC1);
 
-        // m.2 interface
-        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-        PMU->enablePowerOutput(XPOWERS_DCDC3);
+            // LoRa VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        /**
-         * ALDO2 cannot be turned off.
-         * It is a necessary condition for sensor communication.
-         * It must be turned on to properly access the sensor and screen
-         * It is also responsible for the power supply of PCF8563
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // GNSS VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+            // t-beam s3 core
+            /**
+             * gnss module power channel
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
 
-        // 6-axis , magnetometer ,bme280 , oled screen power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO1);
+            // lora radio power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
 
-        // sdcard power channle
-        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_BLDO1);
+            // m.2 interface
+            PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+            PMU->enablePowerOutput(XPOWERS_DCDC3);
 
-        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-        // PMU->enablePowerOutput(XPOWERS_DCDC4);
+            /**
+             * ALDO2 cannot be turned off.
+             * It is a necessary condition for sensor communication.
+             * It must be turned on to properly access the sensor and screen
+             * It is also responsible for the power supply of PCF8563
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        // not use channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
-        PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+            // 6-axis , magnetometer ,bme280 , oled screen power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
+
+            // sdcard power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
+
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+#endif
+
+            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+            // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+            // not use channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        }
 
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
@@ -646,4 +865,4 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
+}

src/PowerFSM.cpp

@@ -1,3 +1,12 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
 #include "GPS.h"
 #include "MeshService.h"
@@ -26,13 +35,16 @@ static bool isPowered()
         1) If we're powered up and there's no battery, we must be getting power externally. (because we'd be dead otherwise)
 
         2) If we detect USB power from the power management chip, we must be getting power externally.
+
+        3) On some boards we don't have the power management chip (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect
+       external power source (see `isVbusIn()` in `Power.cpp`)
     */
     return !isPowerSavingMode && powerStatus && (!powerStatus->getHasBattery() || powerStatus->getHasUSB());
 }
 
 static void sdsEnter()
 {
-    LOG_INFO("Enter state: SDS\n");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
 }
@@ -41,7 +53,7 @@ extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_INFO("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -66,11 +78,11 @@ static void lsIdle()
 
     // Do we have more sleeping to do?
     if (secsSlept < config.power.ls_secs) {
-        // Briefly come out of sleep long enough to blink the led once every few seconds
-        uint32_t sleepTime = 30;
-
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
+            // Briefly come out of sleep long enough to blink the led once every few seconds
+            uint32_t sleepTime = 30;
+
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
 
@@ -78,8 +90,8 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                setLed(true);                 // briefly turn on led
-                wakeCause2 = doLightSleep(1); // leave led on for 1ms
+                setLed(true);                   // briefly turn on led
+                wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
                 // LOG_INFO("sleeping, flash led!\n");
@@ -96,12 +108,11 @@ static void lsIdle()
                 LOG_INFO("wakeCause2 %d\n", wakeCause2);
 
 #ifdef BUTTON_PIN
-                bool pressed = !digitalRead(BUTTON_PIN);
+                bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #else
                 bool pressed = false;
 #endif
-                if (pressed) // If we woke because of press, instead generate a PRESS event.
-                {
+                if (pressed) { // If we woke because of press, instead generate a PRESS event.
                     powerFSM.trigger(EVENT_PRESS);
                 } else {
                     // Otherwise let the NB state handle the IRQ (and that state will handle stuff like IRQs etc)
@@ -133,9 +144,12 @@ static void lsExit()
 
 static void nbEnter()
 {
-    LOG_INFO("Enter state: NB\n");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
+#endif
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -148,7 +162,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_INFO("Enter state: SERIAL\n");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -156,12 +170,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
 {
-    LOG_INFO("Enter state: POWER\n");
+    LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -169,7 +185,11 @@ static void powerEnter()
     } else {
         screen->setOn(true);
         setBluetoothEnable(true);
-        screen->print("Powered...\n");
+        // within enter() the function getState() returns the state we came from
+        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+            strcmp(powerFSM.getState()->name, "DARK") != 0) {
+            screen->print("Powered...\n");
+        }
     }
 }
 
@@ -186,25 +206,15 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    screen->print("Unpowered...\n");
+    if (!isPowered())
+        screen->print("Unpowered...\n");
 }
 
 static void onEnter()
 {
-    LOG_INFO("Enter state: ON\n");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
-
-    static uint32_t lastPingMs;
-
-    uint32_t now = millis();
-
-    if ((now - lastPingMs) >
-        30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
-        if (displayedNodeNum)
-            service.sendNetworkPing(displayedNodeNum, true); // Refresh the currently displayed node
-        lastPingMs = now;
-    }
 }
 
 static void onIdle()
@@ -222,7 +232,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_INFO("Enter state: BOOT\n");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -246,7 +256,11 @@ void PowerFSM_setup()
 
     // wake timer expired or a packet arrived
     // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
     powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
@@ -257,7 +271,7 @@ void PowerFSM_setup()
     // Handle press events - note: we ignore button presses when in API mode
     powerFSM.add_transition(&stateLS, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_PRESS, NULL, "Press");
-    powerFSM.add_transition(&stateDARK, &stateON, EVENT_PRESS, NULL, "Press");
+    powerFSM.add_transition(&stateDARK, isPowered() ? &statePOWER : &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
     powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
     powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
@@ -299,10 +313,10 @@ void PowerFSM_setup()
         powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
-        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text"); // restarts the sleep timer
+        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text"); // restarts the sleep timer
     }
 
     // If we are not in statePOWER but get a serial connection, suppress sleep (and keep the screen on) while connected
@@ -330,6 +344,12 @@ void PowerFSM_setup()
     powerFSM.add_timed_transition(&stateON, &stateDARK,
                                   getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
+    powerFSM.add_timed_transition(&statePOWER, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 
 #ifdef ARCH_ESP32
     State *lowPowerState = &stateLS;
@@ -350,5 +370,5 @@ void PowerFSM_setup()
                                       "mesh timeout");
 #endif
 
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
-}
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
+}

src/PowerFSM.h

@@ -8,7 +8,7 @@
 #define EVENT_WAKE_TIMER 2
 // #define EVENT_RECEIVED_PACKET 3
 #define EVENT_PACKET_FOR_PHONE 4
-#define EVENT_RECEIVED_TEXT_MSG 5
+#define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
 #define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen
@@ -23,6 +23,6 @@
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
 extern Fsm powerFSM;
-extern State statePOWER, stateSERIAL;
+extern State stateON, statePOWER, stateSERIAL, stateDARK;
 
 void PowerFSM_setup();

src/RF95Configuration.h

@@ -2,6 +2,6 @@
 #ifdef USE_RF95
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
-#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95
+#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
 #define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
 #endif

src/RedirectablePrint.cpp

@@ -5,6 +5,8 @@
 #include "configuration.h"
 #include <assert.h>
 #include <cstring>
+#include <memory>
+#include <stdexcept>
 #include <sys/time.h>
 #include <time.h>
 
@@ -13,6 +15,10 @@
  */
 NoopPrint noopPrint;
 
+#if HAS_WIFI || HAS_ETHERNET
+extern Syslog syslog;
+#endif
+
 void RedirectablePrint::setDestination(Print *_dest)
 {
     assert(_dest);
@@ -56,6 +62,9 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, "DEBUG") == 0) {
+        return 0;
+    }
     size_t r = 0;
 
     if (!inDebugPrint) {
@@ -96,6 +105,39 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
         }
         r += vprintf(format, arg);
+
+#if (HAS_WIFI || HAS_ETHERNET) && !defined(ARCH_PORTDUINO)
+        // if syslog is in use, collect the log messages and send them to syslog
+        if (syslog.isEnabled()) {
+            int ll = 0;
+            switch (logLevel[0]) {
+            case 'D':
+                ll = SYSLOG_DEBUG;
+                break;
+            case 'I':
+                ll = SYSLOG_INFO;
+                break;
+            case 'W':
+                ll = SYSLOG_WARN;
+                break;
+            case 'E':
+                ll = SYSLOG_ERR;
+                break;
+            case 'C':
+                ll = SYSLOG_CRIT;
+                break;
+            default:
+                ll = 0;
+            }
+            auto thread = concurrency::OSThread::currentThread;
+            if (thread) {
+                syslog.vlogf(ll, thread->ThreadName.c_str(), format, arg);
+            } else {
+                syslog.vlogf(ll, format, arg);
+            }
+        }
+#endif
+
         va_end(arg);
 
         isContinuationMessage = !hasNewline;
@@ -136,3 +178,22 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
     }
     log(logLevel, "   +------------------------------------------------+ +----------------+\n");
 }
+
+std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)
+{
+    int n = ((int)fmt_str.size()) * 2; /* Reserve two times as much as the length of the fmt_str */
+    std::unique_ptr<char[]> formatted;
+    va_list ap;
+    while (1) {
+        formatted.reset(new char[n]); /* Wrap the plain char array into the unique_ptr */
+        strcpy(&formatted[0], fmt_str.c_str());
+        va_start(ap, fmt_str);
+        int final_n = vsnprintf(&formatted[0], n, fmt_str.c_str(), ap);
+        va_end(ap);
+        if (final_n < 0 || final_n >= n)
+            n += abs(final_n - n + 1);
+        else
+            break;
+    }
+    return std::string(formatted.get());
+}

src/RedirectablePrint.h

@@ -2,6 +2,7 @@
 
 #include <Print.h>
 #include <stdarg.h>
+#include <string>
 
 /**
  * A Printable that can be switched to squirt its bytes to a different sink.
@@ -40,6 +41,8 @@ class RedirectablePrint : public Print
     size_t vprintf(const char *format, va_list arg);
 
     void hexDump(const char *logLevel, unsigned char *buf, uint16_t len);
+
+    std::string mt_sprintf(const std::string fmt_str, ...);
 };
 
 class NoopPrint : public Print

src/SerialConsole.cpp

@@ -31,7 +31,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {

src/airtime.cpp

@@ -6,20 +6,22 @@ AirTime *airTime = NULL;
 
 // Don't read out of this directly. Use the helper functions.
 
+uint32_t air_period_tx[PERIODS_TO_LOG];
+uint32_t air_period_rx[PERIODS_TO_LOG];
+
 void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
         LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
-        myNodeInfo.air_period_tx[0] = myNodeInfo.air_period_tx[0] + airtime_ms;
+        air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
-
     } else if (reportType == RX_LOG) {
         LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
-        myNodeInfo.air_period_rx[0] = myNodeInfo.air_period_rx[0] + airtime_ms;
+        air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
         LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
@@ -55,16 +57,16 @@ void AirTime::airtimeRotatePeriod()
             this->airtimes.periodRX[i + 1] = this->airtimes.periodRX[i];
             this->airtimes.periodRX_ALL[i + 1] = this->airtimes.periodRX_ALL[i];
 
-            myNodeInfo.air_period_tx[i + 1] = this->airtimes.periodTX[i];
-            myNodeInfo.air_period_rx[i + 1] = this->airtimes.periodRX[i];
+            air_period_tx[i + 1] = this->airtimes.periodTX[i];
+            air_period_rx[i + 1] = this->airtimes.periodRX[i];
         }
 
         this->airtimes.periodTX[0] = 0;
         this->airtimes.periodRX[0] = 0;
         this->airtimes.periodRX_ALL[0] = 0;
 
-        myNodeInfo.air_period_tx[0] = 0;
-        myNodeInfo.air_period_rx[0] = 0;
+        air_period_tx[0] = 0;
+        air_period_rx[0] = 0;
 
         this->airtimes.lastPeriodIndex = this->currentPeriodIndex();
     }
@@ -179,18 +181,17 @@ int32_t AirTime::runOnce()
         }
 
         // Init airtime windows to all 0
-        for (int i = 0; i < myNodeInfo.air_period_rx_count; i++) {
+        for (int i = 0; i < PERIODS_TO_LOG; i++) {
             this->airtimes.periodTX[i] = 0;
             this->airtimes.periodRX[i] = 0;
             this->airtimes.periodRX_ALL[i] = 0;
 
-            // myNodeInfo.air_period_tx[i] = 0;
-            // myNodeInfo.air_period_rx[i] = 0;
+            // air_period_tx[i] = 0;
+            // air_period_rx[i] = 0;
         }
 
         firstTime = false;
         lastUtilPeriod = utilPeriod;
-
     } else {
         this->airtimeRotatePeriod();
 
@@ -206,12 +207,6 @@ int32_t AirTime::runOnce()
 
             this->utilizationTX[utilPeriodTX] = 0;
         }
-
-        // Update channel_utilization every second.
-        myNodeInfo.channel_utilization = airTime->channelUtilizationPercent();
-
-        // Update channel_utilization every second.
-        myNodeInfo.air_util_tx = airTime->utilizationTXPercent();
     }
     /*
         LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
@@ -223,4 +218,4 @@ int32_t AirTime::runOnce()
         LOG_DEBUG("\n");
     */
     return (1000 * 1);
-}
+}

src/airtime.h

@@ -17,9 +17,9 @@
 
   Example analytics:
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
                     other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.

src/commands.h

@@ -15,4 +15,6 @@ enum class Cmd {
     PRINT,
     START_SHUTDOWN_SCREEN,
     START_REBOOT_SCREEN,
+    SHOW_PREV_FRAME,
+    SHOW_NEXT_FRAME
 };

src/concurrency/InterruptableDelay.h

@@ -18,7 +18,7 @@ namespace concurrency
  *
  * Useful for they top level loop() delay call to keep the CPU powered down until our next scheduled event or some external event.
  *
- * This is implmented for FreeRTOS but should be easy to port to other operating systems.
+ * This is implemented for FreeRTOS but should be easy to port to other operating systems.
  */
 class InterruptableDelay
 {

src/concurrency/NotifiedWorkerThread.cpp

@@ -31,12 +31,14 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
         runASAP = true;
 
         notification = v;
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("setting notification %d\n", v);
+        }
         return true;
     } else {
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("dropping notification %d\n", v);
+        }
         return false;
     }
 }
@@ -64,8 +66,9 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
 
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
-        if (debugNotification)
+        if (debugNotification) {
             LOG_DEBUG("delaying notification %u\n", delay);
+        }
     }
 
     return didIt;

src/concurrency/OSThread.cpp

@@ -1,5 +1,6 @@
 #include "OSThread.h"
 #include "configuration.h"
+#include "memGet.h"
 #include <assert.h>
 
 namespace concurrency
@@ -60,14 +61,17 @@ bool OSThread::shouldRun(unsigned long time)
 {
     bool r = Thread::shouldRun(time);
 
-    if (showRun && r)
+    if (showRun && r) {
         LOG_DEBUG("Thread %s: run\n", ThreadName.c_str());
+    }
 
-    if (showWaiting && enabled && !r)
+    if (showWaiting && enabled && !r) {
         LOG_DEBUG("Thread %s: wait %lu\n", ThreadName.c_str(), interval);
+    }
 
-    if (showDisabled && !enabled)
+    if (showDisabled && !enabled) {
         LOG_DEBUG("Thread %s: disabled\n", ThreadName.c_str());
+    }
 
     return r;
 }
@@ -75,12 +79,12 @@ bool OSThread::shouldRun(unsigned long time)
 void OSThread::run()
 {
 #ifdef DEBUG_HEAP
-    auto heap = ESP.getFreeHeap();
+    auto heap = memGet.getFreeHeap();
 #endif
     currentThread = this;
     auto newDelay = runOnce();
 #ifdef DEBUG_HEAP
-    auto newHeap = ESP.getFreeHeap();
+    auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
         LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------\n", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)

src/configuration.h

@@ -82,7 +82,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define DISABLE_NTP
 
 // Disable the welcome screen and allow
-//#define DISABLE_WELCOME_UNSET
+// #define DISABLE_WELCOME_UNSET
 
 // -----------------------------------------------------------------------------
 // OLED & Input
@@ -93,13 +93,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // The SH1106 controller is almost, but not quite, the same as SSD1306
 // Define this if you know you have that controller or your "SSD1306" misbehaves.
-//#define USE_SH1106
+// #define USE_SH1106
 
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// The m5stack I2C Keyboard (also RAK14004)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
+#define TDECK_KB_ADDR 0x55
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -116,6 +117,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_ADDR 0x44
+#define PMSA0031_ADDR 0x12
+
+// -----------------------------------------------------------------------------
+// ACCELEROMETER
+// -----------------------------------------------------------------------------
+#define MPU6050_ADDR 0x68
+#define LIS3DH_ADR 0x18
+#define BMA423_ADDR 0x19
+
+// -----------------------------------------------------------------------------
+// LED
+// -----------------------------------------------------------------------------
+#define NCP5623_ADDR 0x38
 
 // -----------------------------------------------------------------------------
 // Security
@@ -160,6 +174,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BUTTON
 #define HAS_BUTTON 0
 #endif
+#ifndef HAS_TRACKBALL
+#define HAS_TRACKBALL 0
+#endif
+#ifndef HAS_TOUCHSCREEN
+#define HAS_TOUCHSCREEN 0
+#endif
 #ifndef HAS_TELEMETRY
 #define HAS_TELEMETRY 0
 #endif
@@ -181,4 +201,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
-#endif
+#endif

src/detect/ScanI2C.cpp

@@ -0,0 +1,76 @@
+#include "ScanI2C.h"
+
+const ScanI2C::DeviceAddress ScanI2C::ADDRESS_NONE = ScanI2C::DeviceAddress();
+const ScanI2C::FoundDevice ScanI2C::DEVICE_NONE = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE, ADDRESS_NONE);
+
+ScanI2C::ScanI2C() = default;
+
+void ScanI2C::scanPort(ScanI2C::I2CPort port) {}
+
+void ScanI2C::setSuppressScreen()
+{
+    shouldSuppressScreen = true;
+}
+
+ScanI2C::FoundDevice ScanI2C::firstScreen() const
+{
+    // Allow to override the scanner results for screen
+    if (shouldSuppressScreen)
+        return DEVICE_NONE;
+
+    ScanI2C::DeviceType types[] = {SCREEN_SSD1306, SCREEN_SH1106, SCREEN_ST7567, SCREEN_UNKNOWN};
+    return firstOfOrNONE(4, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstRTC() const
+{
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
+    return firstOfOrNONE(2, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
+{
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, RAK14004};
+    return firstOfOrNONE(3, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
+{
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
+    return firstOfOrNONE(3, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const
+{
+    return DEVICE_NONE;
+}
+
+bool ScanI2C::exists(ScanI2C::DeviceType) const
+{
+    return false;
+}
+
+ScanI2C::FoundDevice ScanI2C::firstOfOrNONE(size_t count, ScanI2C::DeviceType *types) const
+{
+    return DEVICE_NONE;
+}
+
+size_t ScanI2C::countDevices() const
+{
+    return 0;
+}
+
+ScanI2C::DeviceAddress::DeviceAddress(ScanI2C::I2CPort port, uint8_t address) : port(port), address(address) {}
+
+ScanI2C::DeviceAddress::DeviceAddress() : DeviceAddress(I2CPort::NO_I2C, 0) {}
+
+bool ScanI2C::DeviceAddress::operator<(const ScanI2C::DeviceAddress &other) const
+{
+    return
+        // If this one has no port and other has a port
+        (port == NO_I2C && other.port != NO_I2C)
+        // if both have a port and this one's address is lower
+        || (port != NO_I2C && other.port != NO_I2C && (address < other.address));
+}
+
+ScanI2C::FoundDevice::FoundDevice(ScanI2C::DeviceType type, ScanI2C::DeviceAddress address) : type(type), address(address) {}

src/detect/ScanI2C.h

@@ -0,0 +1,102 @@
+#pragma once
+
+#include <stddef.h>
+#include <stdint.h>
+
+class ScanI2C
+{
+  public:
+    typedef enum DeviceType {
+        NONE,
+        SCREEN_SSD1306,
+        SCREEN_SH1106,
+        SCREEN_UNKNOWN, // has the same address as the two above but does not respond to the same commands
+        SCREEN_ST7567,
+        ATECC608B,
+        RTC_RV3028,
+        RTC_PCF8563,
+        CARDKB,
+        TDECKKB,
+        RAK14004,
+        PMU_AXP192_AXP2101,
+        BME_680,
+        BME_280,
+        BMP_280,
+        INA260,
+        INA219,
+        MCP9808,
+        SHT31,
+        SHTC3,
+        LPS22HB,
+        QMC6310,
+        QMI8658,
+        QMC5883L,
+        PMSA0031,
+        MPU6050,
+        LIS3DH,
+        BMA423,
+#ifdef HAS_NCP5623
+        NCP5623,
+#endif
+    } DeviceType;
+
+    // typedef uint8_t DeviceAddress;
+    typedef enum I2CPort {
+        NO_I2C,
+        WIRE,
+        WIRE1,
+    } I2CPort;
+
+    typedef struct DeviceAddress {
+        I2CPort port;
+        uint8_t address;
+
+        explicit DeviceAddress(I2CPort port, uint8_t address);
+        DeviceAddress();
+
+        bool operator<(const DeviceAddress &other) const;
+    } DeviceAddress;
+
+    static const DeviceAddress ADDRESS_NONE;
+
+    typedef uint8_t RegisterAddress;
+
+    typedef struct FoundDevice {
+        DeviceType type;
+        DeviceAddress address;
+
+        explicit FoundDevice(DeviceType = DeviceType::NONE, DeviceAddress = ADDRESS_NONE);
+    } FoundDevice;
+
+    static const FoundDevice DEVICE_NONE;
+
+  public:
+    ScanI2C();
+
+    virtual void scanPort(ScanI2C::I2CPort);
+
+    /*
+     * A bit of a hack, this tells the scanner not to tell later systems there is a screen to avoid enabling it.
+     */
+    void setSuppressScreen();
+
+    FoundDevice firstScreen() const;
+
+    FoundDevice firstRTC() const;
+
+    FoundDevice firstKeyboard() const;
+
+    FoundDevice firstAccelerometer() const;
+
+    virtual FoundDevice find(DeviceType) const;
+
+    virtual bool exists(DeviceType) const;
+
+    virtual size_t countDevices() const;
+
+  protected:
+    virtual FoundDevice firstOfOrNONE(size_t, DeviceType[]) const;
+
+  private:
+    bool shouldSuppressScreen = false;
+};

src/detect/ScanI2CTwoWire.cpp

@@ -0,0 +1,311 @@
+#include "ScanI2CTwoWire.h"
+
+#include "concurrency/LockGuard.h"
+#include "configuration.h"
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#include "main.h" // atecc
+#endif
+
+// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
+#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
+#endif
+
+ScanI2C::FoundDevice ScanI2CTwoWire::find(ScanI2C::DeviceType type) const
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    return exists(type) ? ScanI2C::FoundDevice(type, deviceAddresses.at(type)) : DEVICE_NONE;
+}
+
+bool ScanI2CTwoWire::exists(ScanI2C::DeviceType type) const
+{
+    return deviceAddresses.find(type) != deviceAddresses.end();
+}
+
+ScanI2C::FoundDevice ScanI2CTwoWire::firstOfOrNONE(size_t count, DeviceType types[]) const
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    for (size_t k = 0; k < count; k++) {
+        ScanI2C::DeviceType current = types[k];
+
+        if (exists(current)) {
+            return ScanI2C::FoundDevice(current, deviceAddresses.at(current));
+        }
+    }
+
+    return DEVICE_NONE;
+}
+
+ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
+{
+    TwoWire *i2cBus = fetchI2CBus(addr);
+
+    uint8_t r = 0;
+    uint8_t r_prev = 0;
+    uint8_t c = 0;
+    ScanI2C::DeviceType o_probe = ScanI2C::DeviceType::SCREEN_UNKNOWN;
+    do {
+        r_prev = r;
+        i2cBus->beginTransmission(addr.address);
+        i2cBus->write((uint8_t)0x00);
+        i2cBus->endTransmission();
+        i2cBus->requestFrom((int)addr.address, 1);
+        if (i2cBus->available()) {
+            r = i2cBus->read();
+        }
+        r &= 0x0f;
+
+        if (r == 0x08 || r == 0x00) {
+            LOG_INFO("sh1106 display found\n");
+            o_probe = SCREEN_SH1106; // SH1106
+        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
+            LOG_INFO("ssd1306 display found\n");
+            o_probe = SCREEN_SSD1306; // SSD1306
+        }
+        c++;
+    } while ((r != r_prev) && (c < 4));
+    LOG_DEBUG("0x%x subtype probed in %i tries \n", r, c);
+
+    return o_probe;
+}
+void ScanI2CTwoWire::printATECCInfo() const
+{
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+    atecc.readConfigZone(false);
+
+    LOG_DEBUG("ATECC608B Serial Number: ");
+    for (int i = 0; i < 9; i++) {
+        LOG_DEBUG("%02x", atecc.serialNumber[i]);
+    }
+
+    LOG_DEBUG(", Rev Number: ");
+    for (int i = 0; i < 4; i++) {
+        LOG_DEBUG("%02x", atecc.revisionNumber[i]);
+    }
+    LOG_DEBUG("\n");
+
+    LOG_DEBUG("ATECC608B Config %s", atecc.configLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Data %s", atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Slot 0 %s\n", atecc.slot0LockStatus ? "Locked" : "Unlocked");
+
+    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
+        if (atecc.generatePublicKey() == false) {
+            LOG_DEBUG("ATECC608B Error generating public key\n");
+        } else {
+            LOG_DEBUG("ATECC608B Public Key: ");
+            for (int i = 0; i < 64; i++) {
+                LOG_DEBUG("%02x", atecc.publicKey64Bytes[i]);
+            }
+            LOG_DEBUG("\n");
+        }
+    }
+#endif
+}
+
+uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation &registerLocation,
+                                          ScanI2CTwoWire::ResponseWidth responseWidth) const
+{
+    uint16_t value = 0x00;
+    TwoWire *i2cBus = fetchI2CBus(registerLocation.i2cAddress);
+
+    i2cBus->beginTransmission(registerLocation.i2cAddress.address);
+    i2cBus->write(registerLocation.registerAddress);
+    i2cBus->endTransmission();
+    delay(20);
+    i2cBus->requestFrom(registerLocation.i2cAddress.address, responseWidth);
+    LOG_DEBUG("Wire.available() = %d\n", i2cBus->available());
+    if (i2cBus->available() == 2) {
+        // Read MSB, then LSB
+        value = (uint16_t)i2cBus->read() << 8;
+        value |= i2cBus->read();
+    } else if (i2cBus->available()) {
+        value = i2cBus->read();
+    }
+    return value;
+}
+
+#define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
+    case ADDR:                                                                                                                   \
+        LOG_INFO(__VA_ARGS__);                                                                                                   \
+        type = T;                                                                                                                \
+        break;
+
+void ScanI2CTwoWire::scanPort(I2CPort port)
+{
+    concurrency::LockGuard guard((concurrency::Lock *)&lock);
+
+    LOG_DEBUG("Scanning for i2c devices on port %d\n", port);
+
+    uint8_t err;
+
+    DeviceAddress addr(port, 0x00);
+
+    uint16_t registerValue = 0x00;
+    ScanI2C::DeviceType type;
+    TwoWire *i2cBus;
+#ifdef RV3028_RTC
+    Melopero_RV3028 rtc;
+#endif
+
+#ifdef I2C_SDA1
+    if (port == I2CPort::WIRE1) {
+        i2cBus = &Wire1;
+    } else {
+#endif
+        i2cBus = &Wire;
+#ifdef I2C_SDA1
+    }
+#endif
+
+    for (addr.address = 1; addr.address < 127; addr.address++) {
+        i2cBus->beginTransmission(addr.address);
+        err = i2cBus->endTransmission();
+        type = NONE;
+        if (err == 0) {
+            LOG_DEBUG("I2C device found at address 0x%x\n", addr.address);
+
+            switch (addr.address) {
+            case SSD1306_ADDRESS:
+                type = probeOLED(addr);
+                break;
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+            case ATECC608B_ADDR:
+                type = ATECC608B;
+                if (atecc.begin(addr.address) == true) {
+                    LOG_INFO("ATECC608B initialized\n");
+                } else {
+                    LOG_WARN("ATECC608B initialization failed\n");
+                }
+                printATECCInfo();
+                break;
+#endif
+
+#ifdef RV3028_RTC
+            case RV3028_RTC:
+                // foundDevices[addr] = RTC_RV3028;
+                type = RTC_RV3028;
+                LOG_INFO("RV3028 RTC found\n");
+                rtc.initI2C(*i2cBus);
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
+                break;
+#endif
+
+#ifdef PCF8563_RTC
+                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found\n")
+#endif
+
+            case CARDKB_ADDR:
+                // Do we have the RAK14006 instead?
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
+                if (registerValue == 0x02) {
+                    // KEYPAD_VERSION
+                    LOG_INFO("RAK14004 found\n");
+                    type = RAK14004;
+                } else {
+                    LOG_INFO("m5 cardKB found\n");
+                    type = CARDKB;
+                }
+                break;
+
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
+#ifdef HAS_NCP5623
+                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
+#endif
+#ifdef HAS_PMU
+                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
+#endif
+            case BME_ADDR:
+            case BME_ADDR_ALTERNATE:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID
+                switch (registerValue) {
+                case 0x61:
+                    LOG_INFO("BME-680 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BME_680;
+                    break;
+                case 0x60:
+                    LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BME_280;
+                    break;
+                default:
+                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BMP_280;
+                }
+                break;
+
+            case INA_ADDR:
+            case INA_ADDR_ALTERNATE:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    LOG_INFO("INA260 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA260;
+                } else { // Assume INA219 if INA260 ID is not found
+                    LOG_INFO("INA219 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA219;
+                }
+                break;
+
+            case MCP9808_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
+                if (registerValue == 0x0400) {
+                    type = MCP9808;
+                    LOG_INFO("MCP9808 sensor found\n");
+                } else {
+                    type = LIS3DH;
+                    LOG_INFO("LIS3DH accelerometer found\n");
+                }
+
+                break;
+
+                SCAN_SIMPLE_CASE(SHT31_ADDR, SHT31, "SHT31 sensor found\n")
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found\n")
+
+            case LPS22HB_ADDR_ALT:
+                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
+
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
+                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
+
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
+                SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+
+            default:
+                LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
+            }
+        } else if (err == 4) {
+            LOG_ERROR("Unknown error at address 0x%x\n", addr);
+        }
+
+        // Check if a type was found for the enumerated device - save, if so
+        if (type != NONE) {
+            deviceAddresses[type] = addr;
+            foundDevices[addr] = type;
+        }
+    }
+}
+
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
+{
+    if (address.port == ScanI2C::I2CPort::WIRE) {
+        return &Wire;
+    } else {
+#ifdef I2C_SDA1
+        return &Wire1;
+#else
+        return &Wire;
+#endif
+    }
+}
+
+size_t ScanI2CTwoWire::countDevices() const
+{
+    return foundDevices.size();
+}

src/detect/ScanI2CTwoWire.h

@@ -0,0 +1,56 @@
+#pragma once
+
+#include <map>
+#include <memory>
+#include <stddef.h>
+#include <stdint.h>
+
+#include <Wire.h>
+
+#include "ScanI2C.h"
+
+#include "../concurrency/Lock.h"
+
+class ScanI2CTwoWire : public ScanI2C
+{
+  public:
+    void scanPort(ScanI2C::I2CPort) override;
+
+    ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
+
+    bool exists(ScanI2C::DeviceType) const override;
+
+    size_t countDevices() const override;
+
+  protected:
+    FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
+
+  private:
+    typedef struct RegisterLocation {
+        DeviceAddress i2cAddress;
+        RegisterAddress registerAddress;
+
+        RegisterLocation(DeviceAddress deviceAddress, RegisterAddress registerAddress)
+            : i2cAddress(deviceAddress), registerAddress(registerAddress)
+        {
+        }
+
+    } RegisterLocation;
+
+    typedef uint8_t ResponseWidth;
+
+    std::map<ScanI2C::DeviceAddress, ScanI2C::DeviceType> foundDevices;
+
+    // note: prone to overwriting if multiple devices of a type are added at different addresses (rare?)
+    std::map<ScanI2C::DeviceType, ScanI2C::DeviceAddress> deviceAddresses;
+
+    concurrency::Lock lock;
+
+    void printATECCInfo() const;
+
+    uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
+
+    DeviceType probeOLED(ScanI2C::DeviceAddress) const;
+
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+};

src/detect/einkScan.h

@@ -1,6 +1,6 @@
 #include "../configuration.h"
 
-#ifdef RAK4630
+#ifdef RAK_4631
 #include "../main.h"
 #include <SPI.h>
 
@@ -64,4 +64,4 @@ void scanEInkDevice(void)
         LOG_DEBUG("EInk display not found\n");
     SPI1.end();
 }
-#endif
+#endif

src/detect/i2cScan.h

@@ -1,233 +0,0 @@
-#include "../configuration.h"
-#include "../main.h"
-#include "mesh/generated/meshtastic/telemetry.pb.h"
-#include <Wire.h>
-
-// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
-#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
-#endif
-
-#if HAS_WIRE
-
-void printATECCInfo()
-{
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-    atecc.readConfigZone(false);
-
-    LOG_DEBUG("ATECC608B Serial Number: ");
-    for (int i = 0; i < 9; i++) {
-        LOG_DEBUG("%02x", atecc.serialNumber[i]);
-    }
-
-    LOG_DEBUG(", Rev Number: ");
-    for (int i = 0; i < 4; i++) {
-        LOG_DEBUG("%02x", atecc.revisionNumber[i]);
-    }
-    LOG_DEBUG("\n");
-
-    LOG_DEBUG("ATECC608B Config %s", atecc.configLockStatus ? "Locked" : "Unlocked");
-    LOG_DEBUG(", Data %s", atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
-    LOG_DEBUG(", Slot 0 %s\n", atecc.slot0LockStatus ? "Locked" : "Unlocked");
-
-    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
-        if (atecc.generatePublicKey() == false) {
-            LOG_DEBUG("ATECC608B Error generating public key\n");
-        } else {
-            LOG_DEBUG("ATECC608B Public Key: ");
-            for (int i = 0; i < 64; i++) {
-                LOG_DEBUG("%02x", atecc.publicKey64Bytes[i]);
-            }
-            LOG_DEBUG("\n");
-        }
-    }
-#endif
-}
-
-uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length)
-{
-    uint16_t value = 0x00;
-    Wire.beginTransmission(address);
-    Wire.write(reg);
-    Wire.endTransmission();
-    delay(20);
-    Wire.requestFrom(address, length);
-    LOG_DEBUG("Wire.available() = %d\n", Wire.available());
-    if (Wire.available() == 2) {
-        // Read MSB, then LSB
-        value = (uint16_t)Wire.read() << 8;
-        value |= Wire.read();
-    } else if (Wire.available()) {
-        value = Wire.read();
-    }
-    return value;
-}
-
-uint8_t oled_probe(byte addr)
-{
-    uint8_t r = 0;
-    uint8_t r_prev = 0;
-    uint8_t c = 0;
-    uint8_t o_probe = 0;
-    do {
-        r_prev = r;
-        Wire.beginTransmission(addr);
-        Wire.write(0x00);
-        Wire.endTransmission();
-        Wire.requestFrom((int)addr, 1);
-        if (Wire.available()) {
-            r = Wire.read();
-        }
-        r &= 0x0f;
-
-        if (r == 0x08 || r == 0x00) {
-            o_probe = 2; // SH1106
-        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
-            o_probe = 1; // SSD1306
-        }
-        c++;
-    } while ((r != r_prev) && (c < 4));
-    LOG_DEBUG("0x%x subtype probed in %i tries \n", r, c);
-    return o_probe;
-}
-
-void scanI2Cdevice()
-{
-    byte err, addr;
-    uint16_t registerValue = 0x00;
-    int nDevices = 0;
-    for (addr = 1; addr < 127; addr++) {
-        Wire.beginTransmission(addr);
-        err = Wire.endTransmission();
-        if (err == 0) {
-            LOG_DEBUG("I2C device found at address 0x%x\n", addr);
-
-            nDevices++;
-
-            if (addr == SSD1306_ADDRESS) {
-                screen_found = addr;
-                screen_model = oled_probe(addr);
-                if (screen_model == 1) {
-                    LOG_INFO("ssd1306 display found\n");
-                } else if (screen_model == 2) {
-                    LOG_INFO("sh1106 display found\n");
-                } else {
-                    LOG_INFO("unknown display found\n");
-                }
-            }
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-            if (addr == ATECC608B_ADDR) {
-                keystore_found = addr;
-                if (atecc.begin(keystore_found) == true) {
-                    LOG_INFO("ATECC608B initialized\n");
-                } else {
-                    LOG_WARN("ATECC608B initialization failed\n");
-                }
-                printATECCInfo();
-            }
-#endif
-#ifdef RV3028_RTC
-            if (addr == RV3028_RTC) {
-                rtc_found = addr;
-                LOG_INFO("RV3028 RTC found\n");
-                Melopero_RV3028 rtc;
-                rtc.initI2C();
-                rtc.writeToRegister(0x35, 0x07); // no Clkout
-                rtc.writeToRegister(0x37, 0xB4);
-            }
-#endif
-#ifdef PCF8563_RTC
-            if (addr == PCF8563_RTC) {
-                rtc_found = addr;
-                LOG_INFO("PCF8563 RTC found\n");
-            }
-#endif
-            if (addr == CARDKB_ADDR) {
-                cardkb_found = addr;
-                // Do we have the RAK14006 instead?
-                registerValue = getRegisterValue(addr, 0x04, 1);
-                if (registerValue == 0x02) { // KEYPAD_VERSION
-                    LOG_INFO("RAK14004 found\n");
-                    kb_model = 0x02;
-                } else {
-                    LOG_INFO("m5 cardKB found\n");
-                    kb_model = 0x00;
-                }
-            }
-            if (addr == ST7567_ADDRESS) {
-                screen_found = addr;
-                LOG_INFO("st7567 display found\n");
-            }
-#ifdef HAS_PMU
-            if (addr == XPOWERS_AXP192_AXP2101_ADDRESS) {
-                pmu_found = true;
-                LOG_INFO("axp192/axp2101 PMU found\n");
-            }
-#endif
-            if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {
-                registerValue = getRegisterValue(addr, 0xD0, 1); // GET_ID
-                if (registerValue == 0x61) {
-                    LOG_INFO("BME-680 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BME680] = addr;
-                } else if (registerValue == 0x60) {
-                    LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BME280] = addr;
-                } else {
-                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_BMP280] = addr;
-                }
-            }
-            if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {
-                registerValue = getRegisterValue(addr, 0xFE, 2);
-                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
-                if (registerValue == 0x5449) {
-                    LOG_INFO("INA260 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260] = addr;
-                } else { // Assume INA219 if INA260 ID is not found
-                    LOG_INFO("INA219 sensor found at address 0x%x\n", (uint8_t)addr);
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219] = addr;
-                }
-            }
-            if (addr == MCP9808_ADDR) {
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MCP9808] = addr;
-                LOG_INFO("MCP9808 sensor found\n");
-            }
-            if (addr == SHT31_ADDR) {
-                LOG_INFO("SHT31 sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_SHT31] = addr;
-            }
-            if (addr == SHTC3_ADDR) {
-                LOG_INFO("SHTC3 sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_SHTC3] = addr;
-            }
-            if (addr == LPS22HB_ADDR || addr == LPS22HB_ADDR_ALT) {
-                LOG_INFO("LPS22HB sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_LPS22] = addr;
-            }
-
-            // High rate sensors, will be processed internally
-            if (addr == QMC6310_ADDR) {
-                LOG_INFO("QMC6310 Highrate 3-Axis magnetic sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMC6310] = addr;
-            }
-            if (addr == QMI8658_ADDR) {
-                LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMI8658] = addr;
-            }
-            if (addr == QMC5883L_ADDR) {
-                LOG_INFO("QMC5883L Highrate 3-Axis magnetic sensor found\n");
-                nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_QMC5883L] = addr;
-            }
-        } else if (err == 4) {
-            LOG_ERROR("Unknow error at address 0x%x\n", addr);
-        }
-    }
-
-    if (nDevices == 0)
-        LOG_INFO("No I2C devices found\n");
-    else
-        LOG_INFO("%i I2C devices found\n", nDevices);
-}
-#else
-void scanI2Cdevice() {}
-#endif

src/error.h

@@ -9,4 +9,4 @@
 
 /// Record an error that should be reported via analytics
 void recordCriticalError(meshtastic_CriticalErrorCode code = meshtastic_CriticalErrorCode_UNSPECIFIED, uint32_t address = 0,
-                         const char *filename = NULL);
+                         const char *filename = NULL);

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>
@@ -44,4 +44,4 @@ typedef uint32_t BaseType_t;
 
 enum eNotifyAction { eNoAction, eSetValueWithoutOverwrite, eSetValueWithOverwrite };
 
-#endif
+#endif

src/gps/GPS.cpp

@@ -4,6 +4,10 @@
 #include "configuration.h"
 #include "sleep.h"
 
+#ifndef GPS_RESET_MODE
+#define GPS_RESET_MODE HIGH
+#endif
+
 // If we have a serial GPS port it will not be null
 #ifdef GPS_SERIAL_NUM
 HardwareSerial _serial_gps_real(GPS_SERIAL_NUM);
@@ -21,11 +25,29 @@ GPS *gps;
 /// only init that port once.
 static bool didSerialInit;
 
-bool GPS::getACK(uint8_t c, uint8_t i)
+struct uBloxGnssModelInfo info;
+uint8_t uBloxProtocolVersion;
+
+void GPS::UBXChecksum(byte *message, size_t length)
+{
+    uint8_t CK_A = 0, CK_B = 0;
+
+    // Calculate the checksum, starting from the CLASS field (which is message[2])
+    for (size_t i = 2; i < length - 2; i++) {
+        CK_A = (CK_A + message[i]) & 0xFF;
+        CK_B = (CK_B + CK_A) & 0xFF;
+    }
+
+    // Place the calculated checksum values in the message
+    message[length - 2] = CK_A;
+    message[length - 1] = CK_B;
+}
+
+bool GPS::getACK(uint8_t class_id, uint8_t msg_id)
 {
     uint8_t b;
     uint8_t ack = 0;
-    const uint8_t ackP[2] = {c, i};
+    const uint8_t ackP[2] = {class_id, msg_id};
     uint8_t buf[10] = {0xB5, 0x62, 0x05, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00};
     unsigned long startTime = millis();
 
@@ -42,17 +64,23 @@ bool GPS::getACK(uint8_t c, uint8_t i)
 
     while (1) {
         if (ack > 9) {
-            return true;
+            // LOG_INFO("Got ACK for class %02X message %02X\n", class_id, msg_id);
+            return true; // ACK received
         }
-        if (millis() - startTime > 1000) {
-            return false;
+        if (millis() - startTime > 3000) {
+            LOG_WARN("No response for class %02X message %02X\n", class_id, msg_id);
+            return false; // No response received within 3 seconds
         }
         if (_serial_gps->available()) {
             b = _serial_gps->read();
             if (b == buf[ack]) {
                 ack++;
             } else {
-                ack = 0;
+                ack = 0;              // Reset the acknowledgement counter
+                if (buf[3] == 0x00) { // UBX-ACK-NAK message
+                    LOG_WARN("Got NAK for class %02X message %02X\n", class_id, msg_id);
+                    return false; // NAK received
+                }
             }
         }
     }
@@ -73,7 +101,7 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
     uint32_t startTime = millis();
     uint16_t needRead;
 
-    while (millis() - startTime < 800) {
+    while (millis() - startTime < 1200) {
         while (_serial_gps->available()) {
             int c = _serial_gps->read();
             switch (ubxFrameCounter) {
@@ -108,12 +136,12 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
                 }
                 break;
             case 4:
-                // Payload lenght lsb
+                // Payload length lsb
                 needRead = c;
                 ubxFrameCounter++;
                 break;
             case 5:
-                // Payload lenght msb
+                // Payload length msb
                 needRead |= (c << 8);
                 ubxFrameCounter++;
                 break;
@@ -126,7 +154,7 @@ int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
                 if (_serial_gps->readBytes(buffer, needRead) != needRead) {
                     ubxFrameCounter = 0;
                 } else {
-                    // return payload lenght
+                    // return payload length
                     return needRead;
                 }
                 break;
@@ -160,10 +188,14 @@ bool GPS::setupGPS()
             config.position.tx_gpio = GPS_TX_PIN;
 #endif
 
+//#define BAUD_RATE 115200
 // ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
-        if (config.position.rx_gpio)
+        if (config.position.rx_gpio) {
+            LOG_DEBUG("Using GPIO%d for GPS RX\n", config.position.rx_gpio);
+            LOG_DEBUG("Using GPIO%d for GPS TX\n", config.position.tx_gpio);
             _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, config.position.rx_gpio, config.position.tx_gpio);
+        }
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -181,8 +213,8 @@ bool GPS::setupGPS()
             // _serial_gps->begin(9600);    //The baud rate of 9600 has been initialized at the beginning of setupGPS, this line
             // is the redundant part delay(250);
 
-            // Initialize the L76K Chip, use GPS + GLONASS
-            _serial_gps->write("$PCAS04,5*1C\r\n");
+            // Initialize the L76K Chip, use GPS + GLONASS + BEIDOU
+            _serial_gps->write("$PCAS04,7*1E\r\n");
             delay(250);
             // only ask for RMC and GGA
             _serial_gps->write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
@@ -190,9 +222,131 @@ bool GPS::setupGPS()
             // Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
             _serial_gps->write("$PCAS11,3*1E\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_UC6850) {
 
+            // use GPS + GLONASS
+            _serial_gps->write("$CFGSYS,h15\r\n");
+            delay(250);
         } else if (gnssModel == GNSS_MODEL_UBLOX) {
 
+            // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
+            // We need set it because by default it is GPS only, and we want to use GLONASS too
+            // Also we need SBAS for better accuracy and extra features
+            // ToDo: Dynamic configure GNSS systems depending of LoRa region
+            byte _message_GNSS[36] = {
+                0xb5, 0x62, // Sync message for UBX protocol
+                0x06, 0x3e, // Message class and ID (UBX-CFG-GNSS)
+                0x1c, 0x00, // Length of payload (28 bytes)
+                0x00,       // msgVer (0 for this version)
+                0x00,       // numTrkChHw (max number of hardware channels, read only, so it's always 0)
+                0xff,       // numTrkChUse (max number of channels to use, 0xff = max available)
+                0x03,       // numConfigBlocks (number of GNSS systems), most modules support maximum 3 GNSS systems
+                // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
+                0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // GPS
+                0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // SBAS
+                0x06, 0x08, 0x0e, 0x00, 0x01, 0x00, 0x01, 0x01, // GLONASS
+                0x00, 0x00                                      // Checksum (to be calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_GNSS, sizeof(_message_GNSS));
+
+            // Send the message to the module
+            _serial_gps->write(_message_GNSS, sizeof(_message_GNSS));
+
+            if (!getACK(0x06, 0x3e)) {
+                // It's not critical if the module doesn't acknowledge this configuration.
+                // The module should operate adequately with its factory or previously saved settings.
+                // It appears that there is a firmware bug in some GPS modules: When an attempt is made
+                // to overwrite a saved state with identical values, no ACK/NAK is received, contrary to
+                // what is specified in the Ublox documentation.
+                // There is also a possibility that the module may be GPS-only.
+                LOG_INFO("Unable to reconfigure GNSS - defaults maintained. Is this module GPS-only?\n");
+                return true;
+            } else {
+                LOG_INFO("GNSS configured for GPS+SBAS+GLONASS. Pause for 0.75s before sending next command.\n");
+                // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next commands
+                delay(750);
+                return true;
+            }
+
+            // Enable interference resistance, because we are using LoRa, WiFi and Bluetooth on same board,
+            // and we need to reduce interference from them
+            byte _message_JAM[16] = {
+                0xB5, 0x62, // UBX protocol sync characters
+                0x06, 0x39, // Message class and ID (UBX-CFG-ITFM)
+                0x08, 0x00, // Length of payload (8 bytes)
+                // bbThreshold (Broadband jamming detection threshold) is set to 0x3F (63 in decimal)
+                // cwThreshold (CW jamming detection threshold) is set to 0x10 (16 in decimal)
+                // algorithmBits (Reserved algorithm settings) is set to 0x16B156 as recommended
+                // enable (Enable interference detection) is set to 1 (enabled)
+                0x3F, 0x10, 0xB1, 0x56, // config: Interference config word
+                // generalBits (General settings) is set to 0x31E as recommended
+                // antSetting (Antenna setting, 0=unknown, 1=passive, 2=active) is set to 0 (unknown)
+                // ToDo: Set to 1 (passive) or 2 (active) if known, for example from UBX-MON-HW, or from board info
+                // enable2 (Set to 1 to scan auxiliary bands, u-blox 8 / u-blox M8 only, otherwise ignored) is set to 1
+                // (enabled)
+                0x1E, 0x03, 0x00, 0x01, // config2: Extra settings for jamming/interference monitor
+                0x00, 0x00              // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_JAM, sizeof(_message_JAM));
+
+            // Send the message to the module
+            _serial_gps->write(_message_JAM, sizeof(_message_JAM));
+
+            if (!getACK(0x06, 0x39)) {
+                LOG_WARN("Unable to enable interference resistance.\n");
+                return true;
+            }
+
+            // Configure navigation engine expert settings:
+            byte _message_NAVX5[48] = {
+                0xb5, 0x62, // UBX protocol sync characters
+                0x06, 0x23, // Message class and ID (UBX-CFG-NAVX5)
+                0x28, 0x00, // Length of payload (40 bytes)
+                0x00, 0x00, // msgVer (0 for this version)
+                // minMax flag = 1: apply min/max SVs settings
+                // minCno flag = 1: apply minimum C/N0 setting
+                // initial3dfix flag = 0: apply initial 3D fix settings
+                // aop flag = 1: apply aopCfg (useAOP flag) settings (AssistNow Autonomous)
+                0x1B, 0x00, // mask1 (First parameters bitmask)
+                // adr flag = 0: apply ADR sensor fusion on/off setting (useAdr flag)
+                // If firmware is not ADR/UDR, enabling this flag will fail configuration
+                // ToDo: check this with UBX-MON-VER
+                0x00, 0x00, 0x00, 0x00, // mask2 (Second parameters bitmask)
+                0x00, 0x00,             // Reserved
+                0x03,                   // minSVs (Minimum number of satellites for navigation) = 3
+                0x10,                   // maxSVs (Maximum number of satellites for navigation) = 16
+                0x06,                   // minCNO (Minimum satellite signal level for navigation) = 6 dBHz
+                0x00,                   // Reserved
+                0x00,                   // iniFix3D (Initial fix must be 3D) = 0 (disabled)
+                0x00, 0x00,             // Reserved
+                0x00,                   // ackAiding (Issue acknowledgements for assistance message input) = 0 (disabled)
+                0x00, 0x00,             // Reserved
+                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
+                0x00,                               // Reserved
+                0x01,                               // aopCfg (AssistNow Autonomous configuration) = 1 (enabled)
+                0x00, 0x00,                         // Reserved
+                0x00, 0x00,                         // Reserved
+                0x00, 0x00, 0x00, 0x00,             // Reserved
+                0x00, 0x00, 0x00,                   // Reserved
+                0x01,                               // useAdr (Enable/disable ADR sensor fusion) = 1 (enabled)
+                0x00, 0x00                          // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_NAVX5, sizeof(_message_NAVX5));
+
+            // Send the message to the module
+            _serial_gps->write(_message_NAVX5, sizeof(_message_NAVX5));
+
+            if (!getACK(0x06, 0x23)) {
+                LOG_WARN("Unable to configure extra settings.\n");
+                return true;
+            }
+
             /*
                 tips: NMEA Only should not be set here, otherwise initializing Ublox gnss module again after
                 setting will not output command messages in UART1, resulting in unrecognized module information
@@ -209,57 +363,205 @@ bool GPS::setupGPS()
 
             // ublox-M10S can be compatible with UBLOX traditional protocol, so the following sentence settings are also valid
 
-            // disable GGL
-            byte _message_GGL[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x01,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x05, 0x3A};
+            // Set GPS update rate to 1Hz
+            // Lowering the update rate helps to save power.
+            // Additionally, for some new modules like the M9/M10, an update rate lower than 5Hz
+            // is recommended to avoid a known issue with satellites disappearing.
+            byte _message_1Hz[] = {
+                0xB5, 0x62, // UBX protocol sync characters
+                0x06, 0x08, // Message class and ID (UBX-CFG-RATE)
+                0x06, 0x00, // Length of payload (6 bytes)
+                0xE8, 0x03, // Measurement Rate (1000ms for 1Hz)
+                0x01, 0x00, // Navigation rate, always 1 in GPS mode
+                0x01, 0x00, // Time reference
+                0x00, 0x00  // Placeholder for checksum, will be calculated next
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_1Hz, sizeof(_message_1Hz));
+
+            // Send the message to the module
+            _serial_gps->write(_message_1Hz, sizeof(_message_1Hz));
+
+            if (!getACK(0x06, 0x08)) {
+                LOG_WARN("Unable to set GPS update rate.\n");
+                return true;
+            }
+
+            // Disable GGL. GGL - Geographic position (latitude and longitude), which provides the current geographical
+            // coordinates.
+            byte _message_GGL[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x01,             // NMEA ID for GLL
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_GGL, sizeof(_message_GGL));
+
+            // Send the message to the module
             _serial_gps->write(_message_GGL, sizeof(_message_GGL));
+
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA GGL.\n");
                 return true;
             }
 
-            // disable GSA
-            byte _message_GSA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x02,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x06, 0x41};
+            // Enable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
+            // the DOP (Dilution of Precision)
+            byte _message_GSA[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x02,             // NMEA ID for GSA
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GSA, sizeof(_message_GSA));
             _serial_gps->write(_message_GSA, sizeof(_message_GSA));
             if (!getACK(0x06, 0x01)) {
-                LOG_WARN("Unable to disable NMEA GSA.\n");
+                LOG_WARN("Unable to Enable NMEA GSA.\n");
                 return true;
             }
 
-            // disable GSV
-            byte _message_GSV[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x03,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x07, 0x48};
+            // Disable GSV. GSV - Satellites in view, details the number and location of satellites in view.
+            byte _message_GSV[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x03,             // NMEA ID for GSV
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GSV, sizeof(_message_GSV));
             _serial_gps->write(_message_GSV, sizeof(_message_GSV));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA GSV.\n");
                 return true;
             }
 
-            // disable VTG
-            byte _message_VTG[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x05,
-                                   0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x09, 0x56};
+            // Disable VTG. VTG - Track made good and ground speed, which provides course and speed information relative to
+            // the ground.
+            byte _message_VTG[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x05,             // NMEA ID for VTG
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x00,                   // Disable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_VTG, sizeof(_message_VTG));
             _serial_gps->write(_message_VTG, sizeof(_message_VTG));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to disable NMEA VTG.\n");
                 return true;
             }
 
-            // enable RMC
-            byte _message_RMC[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x04,
-                                   0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x09, 0x54};
+            // Enable RMC. RMC - Recommended Minimum data, the essential gps pvt (position, velocity, time) data.
+            byte _message_RMC[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x04,             // NMEA ID for RMC
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_RMC, sizeof(_message_RMC));
             _serial_gps->write(_message_RMC, sizeof(_message_RMC));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to enable NMEA RMC.\n");
                 return true;
             }
 
-            // enable GGA
-            byte _message_GGA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x00,
-                                   0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x05, 0x38};
+            // Enable GGA. GGA - Global Positioning System Fix Data, which provides 3D location and accuracy data.
+            byte _message_GGA[] = {
+                0xB5, 0x62,             // UBX sync characters
+                0x06, 0x01,             // Message class and ID (UBX-CFG-MSG)
+                0x08, 0x00,             // Length of payload (8 bytes)
+                0xF0, 0x00,             // NMEA ID for GGA
+                0x01,                   // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
+                0x01,                   // Enable
+                0x01, 0x01, 0x01, 0x01, // Reserved
+                0x00, 0x00              // CK_A and CK_B (Checksum)
+            };
+            UBXChecksum(_message_GGA, sizeof(_message_GGA));
             _serial_gps->write(_message_GGA, sizeof(_message_GGA));
             if (!getACK(0x06, 0x01)) {
                 LOG_WARN("Unable to enable NMEA GGA.\n");
+                return true;
+            }
+
+            // The Power Management configuration allows the GPS module to operate in different power modes for optimized power
+            // consumption.
+            // The modes supported are:
+            // 0x00 = Full power: The module operates at full power with no power saving.
+            // 0x01 = Balanced: The module dynamically adjusts the tracking behavior to balance power consumption.
+            // 0x02 = Interval: The module operates in a periodic mode, cycling between tracking and power saving states.
+            // 0x03 = Aggressive with 1 Hz: The module operates in a power saving mode with a 1 Hz update rate.
+            // 0x04 = Aggressive with 2 Hz: The module operates in a power saving mode with a 2 Hz update rate.
+            // 0x05 = Aggressive with 4 Hz: The module operates in a power saving mode with a 4 Hz update rate.
+            // The 'period' field specifies the position update and search period. It is only valid when the powerSetupValue is
+            // set to Interval; otherwise, it must be set to '0'. The 'onTime' field specifies the duration of the ON phase and
+            // must be smaller than the period. It is only valid when the powerSetupValue is set to Interval; otherwise, it must
+            // be set to '0'.
+            byte UBX_CFG_PMS[14] = {
+                0xB5, 0x62, // UBX sync characters
+                0x06, 0x86, // Message class and ID (UBX-CFG-PMS)
+                0x06, 0x00, // Length of payload (6 bytes)
+                0x00,       // Version (0)
+                0x03,       // Power setup value
+                0x00, 0x00, // period: not applicable, set to 0
+                0x00, 0x00, // onTime: not applicable, set to 0
+                0x00, 0x00  // Placeholder for checksum, will be calculated next
+            };
+
+            // Calculate the checksum and update the message
+            UBXChecksum(UBX_CFG_PMS, sizeof(UBX_CFG_PMS));
+
+            // Send the message to the module
+            _serial_gps->write(UBX_CFG_PMS, sizeof(UBX_CFG_PMS));
+            if (!getACK(0x06, 0x86)) {
+                LOG_WARN("Unable to enable powersaving for GPS.\n");
+                return true;
+            }
+
+            // We need save configuration to flash to make our config changes persistent
+            byte _message_SAVE[21] = {
+                0xB5, 0x62,             // UBX protocol header
+                0x06, 0x09,             // UBX class ID (Configuration Input Messages), message ID (UBX-CFG-CFG)
+                0x0D, 0x00,             // Length of payload (13 bytes)
+                0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared
+                0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections
+                0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded
+                0x0F,                   // deviceMask: BBR, Flash, EEPROM, and SPI Flash
+                0x00, 0x00              // Checksum (calculated below)
+            };
+
+            // Calculate the checksum and update the message.
+            UBXChecksum(_message_SAVE, sizeof(_message_SAVE));
+
+            // Send the message to the module
+            _serial_gps->write(_message_SAVE, sizeof(_message_SAVE));
+
+            if (!getACK(0x06, 0x09)) {
+                LOG_WARN("Unable to save GNSS module configuration.\n");
+                return true;
+            } else {
+                LOG_INFO("GNSS module configuration saved!\n");
+                return true;
             }
         }
     }
@@ -270,22 +572,21 @@ bool GPS::setupGPS()
 bool GPS::setup()
 {
     // Master power for the GPS
-#ifdef PIN_GPS_EN
-    digitalWrite(PIN_GPS_EN, 1);
-    pinMode(PIN_GPS_EN, OUTPUT);
-#endif
 
-#ifdef HAS_PMU
+#if defined(HAS_PMU) || defined(PIN_GPS_EN)
     if (config.position.gps_enabled) {
+#ifdef PIN_GPS_EN
+        pinMode(PIN_GPS_EN, OUTPUT);
+#endif
         setGPSPower(true);
     }
 #endif
 
 #ifdef PIN_GPS_RESET
-    digitalWrite(PIN_GPS_RESET, 1); // assert for 10ms
+    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
     pinMode(PIN_GPS_RESET, OUTPUT);
     delay(10);
-    digitalWrite(PIN_GPS_RESET, 0);
+    digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
     setAwake(true); // Wake GPS power before doing any init
     bool ok = setupGPS();
@@ -385,7 +686,7 @@ void GPS::setAwake(bool on)
     }
 }
 
-/** Get how long we should stay looking for each aquisition in msecs
+/** Get how long we should stay looking for each acquisition in msecs
  */
 uint32_t GPS::getWakeTime() const
 {
@@ -429,6 +730,10 @@ void GPS::publishUpdate()
 
 int32_t GPS::runOnce()
 {
+    // Repeaters have no need for GPS
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER)
+        disable();
+
     if (whileIdle()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
@@ -552,21 +857,17 @@ int GPS::prepareDeepSleep(void *unused)
 
 GnssModel_t GPS::probe()
 {
-    // return immediately if the model is set by the variant.h file
-#ifdef GPS_UBLOX
-    return GNSS_MODEL_UBLOX;
-#elif defined(GPS_L76K)
-    return GNSS_MODEL_MTK;
-#else
-    // we use autodetect, only T-BEAM S3 for now...
-    uint8_t buffer[256];
-    /*
-     * The GNSS module information variable is temporarily placed inside the function body,
-     * if it needs to be used elsewhere, it can be moved to the outside
-     * */
-    struct uBloxGnssModelInfo info;
-
     memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
+// return immediately if the model is set by the variant.h file
+//#ifdef GPS_UBLOX               (unless it's a ublox, because we might want to know the module info!
+//    return GNSS_MODEL_UBLOX;    think about removing this macro and return)
+#if defined(GPS_L76K)
+    return GNSS_MODEL_MTK;
+#elif defined(GPS_UC6580)
+    _serial_gps->updateBaudRate(115200);
+    return GNSS_MODEL_UC6850;
+#else
+    uint8_t buffer[384] = {0};
 
     // Close all NMEA sentences , Only valid for MTK platform
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
@@ -594,31 +895,37 @@ GnssModel_t GPS::probe()
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x0E, 0x30};
     _serial_gps->write(cfg_rate, sizeof(cfg_rate));
     // Check that the returned response class and message ID are correct
-    if (!getAck(buffer, 256, 0x06, 0x08)) {
+    if (!getAck(buffer, 384, 0x06, 0x08)) {
         LOG_WARN("Failed to find UBlox & MTK GNSS Module\n");
-        return GNSS_MODEL_UNKONW;
+        return GNSS_MODEL_UNKNOWN;
     }
-
+    memset(buffer, 0, sizeof(buffer));
+    byte _message_MONVER[8] = {
+        0xB5, 0x62, // Sync message for UBX protocol
+        0x0A, 0x04, // Message class and ID (UBX-MON-VER)
+        0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
+        0x00, 0x00  // Checksum
+    };
     //  Get Ublox gnss module hardware and software info
-    uint8_t cfg_get_hw[] = {0xB5, 0x62, 0x0A, 0x04, 0x00, 0x00, 0x0E, 0x34};
-    _serial_gps->write(cfg_get_hw, sizeof(cfg_get_hw));
+    UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
+    _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
 
-    uint16_t len = getAck(buffer, 256, 0x0A, 0x04);
+    uint16_t len = getAck(buffer, 384, 0x0A, 0x04);
     if (len) {
-
+        // LOG_DEBUG("monver reply size = %d\n", len);
         uint16_t position = 0;
         for (int i = 0; i < 30; i++) {
             info.swVersion[i] = buffer[position];
             position++;
         }
         for (int i = 0; i < 10; i++) {
-            info.hwVersion[i] = buffer[position];
+            info.hwVersion[i] = buffer[position - 1];
             position++;
         }
 
         while (len >= position + 30) {
             for (int i = 0; i < 30; i++) {
-                info.extension[info.extensionNo][i] = buffer[position];
+                info.extension[info.extensionNo][i] = buffer[position - 1];
                 position++;
             }
             info.extensionNo++;
@@ -628,6 +935,7 @@ GnssModel_t GPS::probe()
 
         LOG_DEBUG("Module Info : \n");
         LOG_DEBUG("Soft version: %s\n", info.swVersion);
+        LOG_DEBUG("first char is %c\n", (char)info.swVersion[0]);
         LOG_DEBUG("Hard version: %s\n", info.hwVersion);
         LOG_DEBUG("Extensions:%d\n", info.extensionNo);
         for (int i = 0; i < info.extensionNo; i++) {
@@ -638,19 +946,29 @@ GnssModel_t GPS::probe()
 
         // tips: extensionNo field is 0 on some 6M GNSS modules
         for (int i = 0; i < info.extensionNo; ++i) {
-            if (!strncmp(info.extension[i], "OD=", 3)) {
-                strncpy((char *)buffer, &(info.extension[i][3]), sizeof(buffer));
-                LOG_DEBUG("GetModel:%s\n", (char *)buffer);
+            if (!strncmp(info.extension[i], "MOD=", 4)) {
+                strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer));
+                // LOG_DEBUG("GetModel:%s\n", (char *)buffer);
+                if (strlen((char *)buffer)) {
+                    LOG_INFO("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n", (char *)buffer);
+                } else {
+                    LOG_INFO("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
+                }
+            } else if (!strncmp(info.extension[i], "PROTVER=", 8)) {
+                char *ptr = nullptr;
+                memset(buffer, 0, sizeof(buffer));
+                strncpy((char *)buffer, &(info.extension[i][8]), sizeof(buffer));
+                LOG_DEBUG("Protocol Version:%s\n", (char *)buffer);
+                if (strlen((char *)buffer)) {
+                    uBloxProtocolVersion = strtoul((char *)buffer, &ptr, 10);
+                    LOG_DEBUG("ProtVer=%d\n", uBloxProtocolVersion);
+                } else {
+                    uBloxProtocolVersion = 0;
+                }
             }
         }
     }
 
-    if (strlen((char *)buffer)) {
-        LOG_INFO("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n", buffer);
-    } else {
-        LOG_INFO("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
-    }
-
     return GNSS_MODEL_UBLOX;
 #endif
 }
@@ -672,8 +990,8 @@ GPS *createGps()
         LOG_DEBUG("Using MSL altitude model\n");
 #endif
         if (GPS::_serial_gps) {
-            // Some boards might have only the TX line from the GPS connected, in that case, we can't configure it at all.  Just
-            // assume NMEA at 9600 baud.
+            // Some boards might have only the TX line from the GPS connected, in that case, we can't configure it at all.
+            // Just assume NMEA at 9600 baud.
             GPS *new_gps = new NMEAGPS();
             new_gps->setup();
             return new_gps;
@@ -685,4 +1003,4 @@ GPS *createGps()
     }
     return nullptr;
 #endif
-}
+}

src/gps/GPS.h

@@ -14,7 +14,8 @@ struct uBloxGnssModelInfo {
 typedef enum {
     GNSS_MODEL_MTK,
     GNSS_MODEL_UBLOX,
-    GNSS_MODEL_UNKONW,
+    GNSS_MODEL_UC6850,
+    GNSS_MODEL_UNKNOWN,
 } GnssModel_t;
 
 // Generate a string representation of DOP
@@ -139,6 +140,9 @@ class GPS : private concurrency::OSThread
     /// always returns 0 to indicate okay to sleep
     int prepareDeepSleep(void *unused);
 
+    // Calculate checksum
+    void UBXChecksum(byte *message, size_t length);
+
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
      *
@@ -164,6 +168,7 @@ class GPS : private concurrency::OSThread
     virtual int32_t runOnce() override;
 
     // Get GNSS model
+    String getNMEA();
     GnssModel_t probe();
 
     int getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID);
@@ -172,11 +177,11 @@ class GPS : private concurrency::OSThread
     uint8_t fixeddelayCtr = 0;
 
   protected:
-    GnssModel_t gnssModel = GNSS_MODEL_UNKONW;
+    GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
 };
 
 // Creates an instance of the GPS class.
 // Returns the new instance or null if the GPS is not present.
 GPS *createGps();
 
-extern GPS *gps;
+extern GPS *gps;

src/gps/GeoCoord.cpp

@@ -12,7 +12,7 @@ GeoCoord::GeoCoord(int32_t lat, int32_t lon, int32_t alt) : _latitude(lat), _lon
 
 GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -20,7 +20,7 @@ GeoCoord::GeoCoord(float lat, float lon, int32_t alt) : _altitude(alt)
 
 GeoCoord::GeoCoord(double lat, double lon, int32_t alt) : _altitude(alt)
 {
-    // Change decimial reprsentation to int32_t. I.e., 12.345 becomes 123450000
+    // Change decimial representation to int32_t. I.e., 12.345 becomes 123450000
     _latitude = int32_t(lat * 1e+7);
     _longitude = int32_t(lon * 1e+7);
     GeoCoord::setCoords();
@@ -41,7 +41,7 @@ void GeoCoord::setCoords()
 
 void GeoCoord::updateCoords(int32_t lat, int32_t lon, int32_t alt)
 {
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != lat || _longitude != lon || _altitude != alt) {
         _dirty = true;
         _latitude = lat;
@@ -55,7 +55,7 @@ void GeoCoord::updateCoords(const double lat, const double lon, const int32_t al
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -69,7 +69,7 @@ void GeoCoord::updateCoords(const float lat, const float lon, const int32_t alt)
 {
     int32_t iLat = lat * 1e+7;
     int32_t iLon = lon * 1e+7;
-    // If marked dirty or new coordiantes
+    // If marked dirty or new coordinates
     if (_dirty || _latitude != iLat || _longitude != iLon || _altitude != alt) {
         _dirty = true;
         _latitude = iLat;
@@ -217,7 +217,7 @@ void GeoCoord::latLongToOSGR(const double lat, const double lon, OSGR &osgr)
     double eta2 = v / rho - 1;
     double mA = (1 + n + (5 / 4) * n * n + (5 / 4) * n * n * n) * (phi - phi0);
     double mB = (3 * n + 3 * n * n + (21 / 8) * n * n * n) * sin(phi - phi0) * cos(phi + phi0);
-    // loss of precision in mC & mD due to floating point rounding can cause innaccuracy of northing by a few meters
+    // loss of precision in mC & mD due to floating point rounding can cause inaccuracy of northing by a few meters
     double mC = (15 / 8 * n * n + 15 / 8 * n * n * n) * sin(2 * (phi - phi0)) * cos(2 * (phi + phi0));
     double mD = (35 / 24) * n * n * n * sin(3 * (phi - phi0)) * cos(3 * (phi + phi0));
     double m = b * f0 * (mA - mB + mC - mD);

src/gps/GeoCoord.h

@@ -65,7 +65,7 @@ struct MGRS {
     uint32_t northing;
 };
 
-// A struct to hold the data for a OSGR coordiante
+// A struct to hold the data for a OSGR coordinate
 struct OSGR {
     char e100k;
     char n100k;

src/gps/NMEAGPS.cpp

@@ -107,6 +107,14 @@ bool NMEAGPS::lookForLocation()
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)
     fixQual = reader.fixQuality();
 
+#ifndef TINYGPS_OPTION_NO_STATISTICS
+    if (reader.failedChecksum() > lastChecksumFailCount) {
+        LOG_WARN("Warning, %u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
+                 reader.failedChecksum());
+        lastChecksumFailCount = reader.failedChecksum();
+    }
+#endif
+
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     fixType = atoi(gsafixtype.value()); // will set to zero if no data
     // LOG_DEBUG("FIX QUAL=%d, TYPE=%d\n", fixQual, fixType);
@@ -174,8 +182,10 @@ bool NMEAGPS::lookForLocation()
 #endif
 
     // Discard incomplete or erroneous readings
-    if (reader.hdop.value() == 0)
+    if (reader.hdop.value() == 0) {
+        LOG_WARN("BOGUS hdop.value() REJECTED: %d\n", reader.hdop.value());
         return false;
+    }
 
     p.latitude_i = toDegInt(loc.lat);
     p.longitude_i = toDegInt(loc.lng);
@@ -243,7 +253,8 @@ bool NMEAGPS::hasFlow()
 bool NMEAGPS::whileIdle()
 {
     bool isValid = false;
-
+    // if (_serial_gps->available() > 0)
+    // LOG_DEBUG("GPS Bytes Waiting: %u\n", _serial_gps->available());
     // First consume any chars that have piled up at the receiver
     while (_serial_gps->available() > 0) {
         int c = _serial_gps->read();

src/gps/NMEAGPS.h

@@ -13,6 +13,7 @@ class NMEAGPS : public GPS
 {
     TinyGPSPlus reader;
     uint8_t fixQual = 0; // fix quality from GPGGA
+    uint32_t lastChecksumFailCount = 0;
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
@@ -53,4 +54,4 @@ class NMEAGPS : public GPS
     virtual bool hasLock() override;
 
     virtual bool hasFlow() override;
-};
+};

src/gps/NMEAWPL.cpp

@@ -1,5 +1,7 @@
 #include "NMEAWPL.h"
 #include "GeoCoord.h"
+#include "RTC.h"
+#include <time.h>
 
 /* -------------------------------------------
  *        1       2 3        4 5    6
@@ -16,10 +18,11 @@
  * -------------------------------------------
  */
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name)
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    uint32_t len = snprintf(buf, bufsz, "$GNWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", geoCoord.getDMSLatDeg(),
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
                             (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
                             geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
                             geoCoord.getDMSLonCP(), name);
@@ -31,6 +34,21 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
     return len;
 }
 
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode)
+{
+    GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
+    char type = isCaltopoMode ? 'P' : 'N';
+    uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(),
+                            (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(),
+                            geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
+                            geoCoord.getDMSLonCP(), name);
+    uint32_t chk = 0;
+    for (uint32_t i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += snprintf(buf + len, bufsz - len, "*%02X\r\n", chk);
+    return len;
+}
 /* -------------------------------------------
  *        1         2       3 4       5 6 7  8   9  10 11 12 13  14   15
  *        |         |       | |       | | |  |   |   | |   | |   |    |
@@ -56,12 +74,18 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
 uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    uint32_t len =
-        snprintf(buf, bufsz, "$GNGGA,%06u.%03u,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", pos.time / 1000,
-                 pos.time % 1000, geoCoord.getDMSLatDeg(), (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6,
-                 geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
-                 (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_type,
-                 pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
+    tm *t = localtime((time_t *)&pos.timestamp);
+    if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
+        uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+        t = localtime((time_t *)&rtc_sec);
+    }
+
+    uint32_t len = snprintf(
+        buf, bufsz, "$GNGGA,%02d%02d%02d.%02d,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", t->tm_hour,
+        t->tm_min, t->tm_sec, pos.timestamp_millis_adjust, geoCoord.getDMSLatDeg(),
+        (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
+        (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_quality,
+        pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
 
     uint32_t chk = 0;
     for (uint32_t i = 1; i < len; i++) {

src/gps/NMEAWPL.h

@@ -3,5 +3,6 @@
 #include "main.h"
 #include <Arduino.h>
 
-uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name);
-uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, const char *name, bool isCaltopoMode = false);
+uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos);

src/gps/RTC.cpp

@@ -1,5 +1,6 @@
 #include "RTC.h"
 #include "configuration.h"
+#include "detect/ScanI2C.h"
 #include "main.h"
 #include <sys/time.h>
 #include <time.h>
@@ -16,14 +17,22 @@ static uint32_t
     timeStartMsec; // Once we have a GPS lock, this is where we hold the initial msec clock that corresponds to that time
 static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only updated once on initial lock
 
+/**
+ * Reads the current date and time from the RTC module and updates the system time.
+ * @return True if the RTC was successfully read and the system time was updated, false otherwise.
+ */
 void readFromRTC()
 {
-    struct timeval tv; /* btw settimeofday() is helpfull here too*/
+    struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
-    if (rtc_found == RV3028_RTC) {
+    if (rtc_found.address == RV3028_RTC) {
         uint32_t now = millis();
         Melopero_RV3028 rtc;
+#ifdef I2C_SDA1
+        rtc.initI2C(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
+#else
         rtc.initI2C();
+#endif
         tm t;
         t.tm_year = rtc.getYear() - 1900;
         t.tm_mon = rtc.getMonth() - 1;
@@ -41,14 +50,16 @@ void readFromRTC()
         }
     }
 #elif defined(PCF8563_RTC)
-    if (rtc_found == PCF8563_RTC) {
+    if (rtc_found.address == PCF8563_RTC) {
         uint32_t now = millis();
         PCF8563_Class rtc;
-#ifdef RTC_USE_WIRE1
-        rtc.begin(Wire1);
+
+#ifdef I2C_SDA1
+        rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
         rtc.begin();
 #endif
+
         auto tc = rtc.getDateTime();
         tm t;
         t.tm_year = tc.year - 1900;
@@ -76,7 +87,15 @@ void readFromRTC()
 #endif
 }
 
-/// If we haven't yet set our RTC this boot, set it from a GPS derived time
+/**
+ * Sets the RTC (Real-Time Clock) if the provided time is of higher quality than the current RTC time.
+ *
+ * @param q The quality of the provided time.
+ * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
+ * @return True if the RTC was set, false otherwise.
+ *
+ * If we haven't yet set our RTC this boot, set it from a GPS derived time
+ */
 bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 {
     static uint32_t lastSetMsec = 0;
@@ -103,19 +122,24 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 
         // If this platform has a setable RTC, set it
 #ifdef RV3028_RTC
-        if (rtc_found == RV3028_RTC) {
+        if (rtc_found.address == RV3028_RTC) {
             Melopero_RV3028 rtc;
+#ifdef I2C_SDA1
+            rtc.initI2C(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
+#else
             rtc.initI2C();
+#endif
             tm *t = localtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
         }
 #elif defined(PCF8563_RTC)
-        if (rtc_found == PCF8563_RTC) {
+        if (rtc_found.address == PCF8563_RTC) {
             PCF8563_Class rtc;
-#ifdef RTC_USE_WIRE1
-            rtc.begin(Wire1);
+
+#ifdef I2C_SDA1
+            rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
             rtc.begin();
 #endif
@@ -139,6 +163,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     }
 }
 
+/**
+ * Sets the RTC time if the provided time is of higher quality than the current RTC time.
+ *
+ * @param q The quality of the provided time.
+ * @param t The time to potentially set the RTC to.
+ * @return True if the RTC was set to the provided time, false otherwise.
+ */
 bool perhapsSetRTC(RTCQuality q, struct tm &t)
 {
     /* Convert to unix time
@@ -159,11 +190,22 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     }
 }
 
+/**
+ * Returns the current time in seconds since the Unix epoch (January 1, 1970).
+ *
+ * @return The current time in seconds since the Unix epoch.
+ */
 uint32_t getTime()
 {
     return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
 }
 
+/**
+ * Returns the current time from the RTC if the quality of the time is at least minQuality.
+ *
+ * @param minQuality The minimum quality of the RTC time required for it to be considered valid.
+ * @return The current time from the RTC if it meets the minimum quality requirement, or 0 if the time is not valid.
+ */
 uint32_t getValidTime(RTCQuality minQuality)
 {
     return (currentQuality >= minQuality) ? getTime() : 0;

src/graphics/EInkDisplay2.cpp

@@ -7,6 +7,10 @@
 #include "main.h"
 #include <SPI.h>
 
+// #ifdef HELTEC_WIRELESS_PAPER
+// SPIClass *hspi = NULL;
+// #endif
+
 #define COLORED GxEPD_BLACK
 #define UNCOLORED GxEPD_WHITE
 
@@ -19,13 +23,17 @@
 #define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 
 // 4.2 inch 300x400 - GxEPD2_420_M01
-//#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
+// #define TECHO_DISPLAY_MODEL GxEPD2_420_M01
 
 // 2.9 inch 296x128 - GxEPD2_290_T5D
-//#define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
+// #define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
 
 // 1.54 inch 200x200 - GxEPD2_154_M09
-//#define TECHO_DISPLAY_MODEL GxEPD2_154_M09
+// #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
+
+#elif defined(MAKERPYTHON)
+// 2.9 inch 296x128 - GxEPD2_290_T5D
+#define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
 
 #elif defined(PCA10059)
 
@@ -37,11 +45,14 @@
 // 1.54 inch 200x200 - GxEPD2_154_M09
 #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
 
+#elif defined(HELTEC_WIRELESS_PAPER)
+//#define TECHO_DISPLAY_MODEL GxEPD2_213_T5D
+#define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 #endif
 
 GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT> *adafruitDisplay;
 
-EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, uint8_t screen_model)
+EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
 #if defined(TTGO_T_ECHO)
     setGeometry(GEOMETRY_RAWMODE, TECHO_DISPLAY_MODEL::WIDTH, TECHO_DISPLAY_MODEL::HEIGHT);
@@ -59,6 +70,13 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, uint8_t screen_model
     // GxEPD2_154_M09
     // setGeometry(GEOMETRY_RAWMODE, 200, 200);
 
+#elif defined(HELTEC_WIRELESS_PAPER)
+    // setGeometry(GEOMETRY_RAWMODE, 212, 104);
+    setGeometry(GEOMETRY_RAWMODE, 250, 122);
+#elif defined(MAKERPYTHON)
+    // GxEPD2_290_T5D
+    setGeometry(GEOMETRY_RAWMODE, 296, 128);
+
 #elif defined(PCA10059)
 
     // GxEPD2_420_M01
@@ -69,6 +87,11 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, uint8_t screen_model
     // M5Stack_CoreInk 200x200
     // 1.54 inch 200x200 - GxEPD2_154_M09
     setGeometry(GEOMETRY_RAWMODE, EPD_HEIGHT, EPD_WIDTH);
+#elif defined(my)
+
+    // GxEPD2_290_T5D
+    setGeometry(GEOMETRY_RAWMODE, 296, 128);
+    LOG_DEBUG("GEOMETRY_RAWMODE, 296, 128\n");
 
 #endif
     // setGeometry(GEOMETRY_RAWMODE, 128, 64); // old resolution
@@ -97,7 +120,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         for (uint32_t y = 0; y < displayHeight; y++) {
             for (uint32_t x = 0; x < displayWidth; x++) {
 
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
                 auto b = buffer[x + (y / 8) * displayWidth];
                 auto isset = b & (1 << (y & 7));
                 adafruitDisplay->drawPixel(x, y, isset ? COLORED : UNCOLORED);
@@ -109,7 +132,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 #if defined(TTGO_T_ECHO)
         // ePaper.Reset(); // wake the screen from sleep
         adafruitDisplay->display(false); // FIXME, use partial update mode
-#elif defined(RAK4630)
+#elif defined(RAK4630) || defined(MAKERPYTHON)
 
         // RAK14000 2.13 inch b/w 250x122 actually now does support partial updates
 
@@ -125,6 +148,10 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
 #elif defined(PCA10059) || defined(M5_COREINK)
         adafruitDisplay->nextPage();
+
+#elif defined(PRIVATE_HW) || defined(my)
+        adafruitDisplay->nextPage();
+
 #endif
 
         // Put screen to sleep to save power (possibly not necessary because we already did poweroff inside of display)
@@ -184,7 +211,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
     }
-#elif defined(RAK4630)
+#elif defined(RAK4630) || defined(MAKERPYTHON)
     {
         if (eink_found) {
             auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
@@ -202,6 +229,16 @@ bool EInkDisplay::connect()
             (void)adafruitDisplay;
         }
     }
+#elif defined(HELTEC_WIRELESS_PAPER)
+    {
+        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        // hspi = new SPIClass(HSPI);
+        // hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+        adafruitDisplay->init(115200, true, 10, false, SPI, SPISettings(6000000, MSBFIRST, SPI_MODE0));
+        adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+    }
 #elif defined(PCA10059)
     {
         auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
@@ -216,6 +253,14 @@ bool EInkDisplay::connect()
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
     adafruitDisplay->setRotation(0);
     adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
+#elif defined(my)
+    {
+        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
+        adafruitDisplay->setRotation(1);
+        adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
+    }
 #endif
 
     // adafruitDisplay->setFullWindow();

src/graphics/EInkDisplay2.h

@@ -3,7 +3,7 @@
 #include <OLEDDisplay.h>
 
 /**
- * An adapter class that allows using the TFT_eSPI library as if it was an OLEDDisplay implementation.
+ * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
  * Remaining TODO:
  * optimize display() to only draw changed pixels (see other OLED subclasses for examples)
@@ -22,7 +22,7 @@ class EInkDisplay : public OLEDDisplay
     /* constructor
     FIXME - the parameters are not used, just a temporary hack to keep working like the old displays
     */
-    EInkDisplay(uint8_t address, int sda, int scl, uint8_t screen_model);
+    EInkDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
     // Write the buffer to the display memory (for eink we only do this occasionally)
     virtual void display(void) override;

src/graphics/RAKled.h

@@ -0,0 +1,7 @@
+#include "main.h"
+
+#ifdef HAS_NCP5623
+#include <NCP5623.h>
+extern NCP5623 rgb;
+
+#endif

src/graphics/Screen.cpp

@@ -19,6 +19,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
+#include "Screen.h"
 #include "configuration.h"
 #if HAS_SCREEN
 #include <OLEDDisplay.h>
@@ -26,10 +27,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
-#include "Screen.h"
+#include "error.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h"
 #include "graphics/images.h"
+#include "input/TouchScreenImpl1.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
@@ -50,6 +52,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "fonts/OLEDDisplayFontsRU.h"
 #endif
 
+#ifdef OLED_UA
+#include "fonts/OLEDDisplayFontsUA.h"
+#endif
+
 using namespace meshtastic; /** @todo remove */
 
 namespace graphics
@@ -70,6 +76,8 @@ static char btPIN[16] = "888888";
 
 uint32_t logo_timeout = 5000; // 4 seconds for EACH logo
 
+uint32_t hours_in_month = 730;
+
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
 
@@ -95,7 +103,8 @@ static uint16_t displayWidth, displayHeight;
 #define SCREEN_WIDTH displayWidth
 #define SCREEN_HEIGHT displayHeight
 
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19
 #define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
@@ -104,8 +113,12 @@ static uint16_t displayWidth, displayHeight;
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
+#ifdef OLED_UA
+#define FONT_SMALL ArialMT_Plain_10_UA
+#else
 #define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
+#endif
 #define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #endif
@@ -285,7 +298,7 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     int x_offset = display->width() / 2;
-    int y_offset = display->height() == 64 ? 0 : 32;
+    int y_offset = display->height() <= 80 ? 0 : 32;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setFont(FONT_MEDIUM);
     display->drawString(x_offset + x, y_offset + y, "Bluetooth");
@@ -309,18 +322,18 @@ static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state,
 
 static void drawFrameShutdown(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    uint16_t x_offset = display->width() / 2;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
-
     display->setFont(FONT_MEDIUM);
-    display->drawString(64 + x, 26 + y, "Shutting down...");
+    display->drawString(x_offset + x, 26 + y, "Shutting down...");
 }
 
 static void drawFrameReboot(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    uint16_t x_offset = display->width() / 2;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
-
     display->setFont(FONT_MEDIUM);
-    display->drawString(64 + x, 26 + y, "Rebooting...");
+    display->drawString(x_offset + x, 26 + y, "Rebooting...");
 }
 
 static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
@@ -338,20 +351,18 @@ static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, i
 /// Draw the last text message we received
 static void drawCriticalFaultFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    displayedNodeNum = 0; // Not currently showing a node pane
-
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_MEDIUM);
 
     char tempBuf[24];
-    snprintf(tempBuf, sizeof(tempBuf), "Critical fault #%d", myNodeInfo.error_code);
+    snprintf(tempBuf, sizeof(tempBuf), "Critical fault #%d", error_code);
     display->drawString(0 + x, 0 + y, tempBuf);
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
     display->drawString(0 + x, FONT_HEIGHT_MEDIUM + y, "For help, please visit \nmeshtastic.org");
 }
 
-// Ignore messages orginating from phone (from the current node 0x0) unless range test or store and forward module are enabled
+// Ignore messages originating from phone (from the current node 0x0) unless range test or store and forward module are enabled
 static bool shouldDrawMessage(const meshtastic_MeshPacket *packet)
 {
     return packet->from != 0 && !moduleConfig.range_test.enabled && !moduleConfig.store_forward.enabled;
@@ -360,13 +371,11 @@ static bool shouldDrawMessage(const meshtastic_MeshPacket *packet)
 /// Draw the last text message we received
 static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    displayedNodeNum = 0; // Not currently showing a node pane
-
     // the max length of this buffer is much longer than we can possibly print
     static char tempBuf[237];
 
     meshtastic_MeshPacket &mp = devicestate.rx_text_message;
-    meshtastic_NodeInfo *node = nodeDB.getNode(getFrom(&mp));
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(getFrom(&mp));
     // LOG_DEBUG("drawing text message from 0x%x: %s\n", mp.from,
     // mp.decoded.variant.data.decoded.bytes);
 
@@ -379,16 +388,63 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
         display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
         display->setColor(BLACK);
     }
-    display->drawStringf(0 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+
+    uint32_t seconds = sinceReceived(&mp);
+    uint32_t minutes = seconds / 60;
+    uint32_t hours = minutes / 60;
+    uint32_t days = hours / 24;
+
     if (config.display.heading_bold) {
-        display->drawStringf(1 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+        display->drawStringf(1 + x, 0 + y, tempBuf, "%s ago from %s",
+                             screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                             (node && node->has_user) ? node->user.short_name : "???");
     }
+    display->drawStringf(0 + x, 0 + y, tempBuf, "%s ago from %s", screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                         (node && node->has_user) ? node->user.short_name : "???");
+
     display->setColor(WHITE);
     snprintf(tempBuf, sizeof(tempBuf), "%s", mp.decoded.payload.bytes);
     display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
 }
 
-/// Draw a series of fields in a column, wrapping to multiple colums if needed
+/// Draw the last waypoint we received
+static void drawWaypointFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    static char tempBuf[237];
+
+    meshtastic_MeshPacket &mp = devicestate.rx_waypoint;
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(getFrom(&mp));
+
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
+        display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+        display->setColor(BLACK);
+    }
+
+    uint32_t seconds = sinceReceived(&mp);
+    uint32_t minutes = seconds / 60;
+    uint32_t hours = minutes / 60;
+    uint32_t days = hours / 24;
+
+    if (config.display.heading_bold) {
+        display->drawStringf(1 + x, 0 + y, tempBuf, "%s ago from %s",
+                             screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                             (node && node->has_user) ? node->user.short_name : "???");
+    }
+    display->drawStringf(0 + x, 0 + y, tempBuf, "%s ago from %s", screen->drawTimeDelta(days, hours, minutes, seconds).c_str(),
+                         (node && node->has_user) ? node->user.short_name : "???");
+
+    display->setColor(WHITE);
+    meshtastic_Waypoint scratch;
+    memset(&scratch, 0, sizeof(scratch));
+    if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, &meshtastic_Waypoint_msg, &scratch)) {
+        snprintf(tempBuf, sizeof(tempBuf), "Received waypoint: %s", scratch.name);
+        display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
+    }
+}
+
+/// Draw a series of fields in a column, wrapping to multiple columns if needed
 static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
 {
     // The coordinates define the left starting point of the text
@@ -411,38 +467,6 @@ static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char *
     }
 }
 
-#if 0
-    /// Draw a series of fields in a row, wrapping to multiple rows if needed
-    /// @return the max y we ended up printing to
-    static uint32_t drawRows(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
-    {
-        // The coordinates define the left starting point of the text
-        display->setTextAlignment(TEXT_ALIGN_LEFT);
-
-        const char **f = fields;
-        int xo = x, yo = y;
-        const int COLUMNS = 2; // hardwired for two columns per row....
-        int col = 0;           // track which column we are on
-        while (*f) {
-            display->drawString(xo, yo, *f);
-            xo += SCREEN_WIDTH / COLUMNS;
-            // Wrap to next row, if needed.
-            if (++col >= COLUMNS) {
-                xo = x;
-                yo += FONT_HEIGHT_SMALL;
-                col = 0;
-            }
-            f++;
-        }
-        if (col != 0) {
-            // Include last incomplete line in our total.
-            yo += FONT_HEIGHT_SMALL;
-        }
-
-        return yo;
-    }
-#endif
-
 // Draw power bars or a charging indicator on an image of a battery, determined by battery charge voltage or percentage.
 static void drawBattery(OLEDDisplay *display, int16_t x, int16_t y, uint8_t *imgBuffer, const PowerStatus *powerStatus)
 {
@@ -470,7 +494,8 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, NodeStatus *no
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
     display->drawFastImage(x, y, 8, 8, imgUser);
@@ -530,18 +555,12 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
 // Draw status when gps is disabled by PMU
 static void drawGPSpowerstat(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
 {
-#ifdef HAS_PMU
     String displayLine = "GPS disabled";
     int16_t xPos = display->getStringWidth(displayLine);
 
     if (!config.position.gps_enabled) {
         display->drawString(x + xPos, y, displayLine);
-#ifdef GPS_POWER_TOGGLE
-        display->drawString(x + xPos, y - 2 + FONT_HEIGHT_SMALL, " by button");
-#endif
-        // display->drawString(x + xPos, y + 2, displayLine);
     }
-#endif
 }
 
 static void drawGPSAltitude(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
@@ -610,7 +629,6 @@ static void drawGPScoordinates(OLEDDisplay *display, int16_t x, int16_t y, const
             } else {
                 display->drawString(x + (SCREEN_WIDTH - (display->getStringWidth(coordinateLine))) / 2, y, coordinateLine);
             }
-
         } else {
             char latLine[22];
             char lonLine[22];
@@ -697,13 +715,6 @@ static float estimatedHeading(double lat, double lon)
     return b;
 }
 
-/// Sometimes we will have Position objects that only have a time, so check for
-/// valid lat/lon
-static bool hasPosition(meshtastic_NodeInfo *n)
-{
-    return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0);
-}
-
 static uint16_t getCompassDiam(OLEDDisplay *display)
 {
     uint16_t diam = 0;
@@ -785,17 +796,16 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (state->currentFrame != prevFrame) {
         prevFrame = state->currentFrame;
 
-        nodeIndex = (nodeIndex + 1) % nodeDB.getNumNodes();
-        meshtastic_NodeInfo *n = nodeDB.getNodeByIndex(nodeIndex);
+        nodeIndex = (nodeIndex + 1) % nodeDB.getNumMeshNodes();
+        meshtastic_NodeInfoLite *n = nodeDB.getMeshNodeByIndex(nodeIndex);
         if (n->num == nodeDB.getNodeNum()) {
             // Don't show our node, just skip to next
-            nodeIndex = (nodeIndex + 1) % nodeDB.getNumNodes();
-            n = nodeDB.getNodeByIndex(nodeIndex);
+            nodeIndex = (nodeIndex + 1) % nodeDB.getNumMeshNodes();
+            n = nodeDB.getMeshNodeByIndex(nodeIndex);
         }
-        displayedNodeNum = n->num;
     }
 
-    meshtastic_NodeInfo *node = nodeDB.getNodeByIndex(nodeIndex);
+    meshtastic_NodeInfoLite *node = nodeDB.getMeshNodeByIndex(nodeIndex);
 
     display->setFont(FONT_SMALL);
 
@@ -818,9 +828,6 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     else if (agoSecs < 120 * 60) // last 2 hrs
         snprintf(lastStr, sizeof(lastStr), "%u minutes ago", agoSecs / 60);
     else {
-
-        uint32_t hours_in_month = 730;
-
         // Only show hours ago if it's been less than 6 months. Otherwise, we may have bad
         //   data.
         if ((agoSecs / 60 / 60) < (hours_in_month * 6)) {
@@ -831,8 +838,12 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     }
 
     static char distStr[20];
-    strncpy(distStr, "? km", sizeof(distStr)); // might not have location data
-    meshtastic_NodeInfo *ourNode = nodeDB.getNode(nodeDB.getNodeNum());
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+        strncpy(distStr, "? mi", sizeof(distStr)); // might not have location data
+    } else {
+        strncpy(distStr, "? km", sizeof(distStr));
+    }
+    meshtastic_NodeInfoLite *ourNode = nodeDB.getMeshNode(nodeDB.getNodeNum());
     const char *fields[] = {username, distStr, signalStr, lastStr, NULL};
     int16_t compassX = 0, compassY = 0;
 
@@ -846,15 +857,15 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     }
     bool hasNodeHeading = false;
 
-    if (ourNode && hasPosition(ourNode)) {
-        meshtastic_Position &op = ourNode->position;
+    if (ourNode && hasValidPosition(ourNode)) {
+        meshtastic_PositionLite &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
         drawCompassNorth(display, compassX, compassY, myHeading);
 
-        if (hasPosition(node)) {
+        if (hasValidPosition(node)) {
             // display direction toward node
             hasNodeHeading = true;
-            meshtastic_Position &p = node->position;
+            meshtastic_PositionLite &p = node->position;
             float d =
                 GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
 
@@ -882,7 +893,8 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (!hasNodeHeading) {
         // direction to node is unknown so display question mark
         // Debug info for gps lock errors
-        // LOG_DEBUG("ourNode %d, ourPos %d, theirPos %d\n", !!ourNode, ourNode && hasPosition(ourNode), hasPosition(node));
+        // LOG_DEBUG("ourNode %d, ourPos %d, theirPos %d\n", !!ourNode, ourNode && hasValidPosition(ourNode),
+        // hasValidPosition(node));
         display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
     }
     display->drawCircle(compassX, compassY, getCompassDiam(display) / 2);
@@ -908,13 +920,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
 //     }
 // }
 // #else
-Screen::Screen(uint8_t address, int sda, int scl)
-    : OSThread("Screen"), cmdQueue(32),
-      dispdev(address, sda, scl,
-              screen_model == meshtastic_Config_DisplayConfig_OledType_OLED_SH1107 ? GEOMETRY_128_128 : GEOMETRY_128_64),
+Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_OledType screenType, OLEDDISPLAY_GEOMETRY geometry)
+    : concurrency::OSThread("Screen"), address_found(address), model(screenType), geometry(geometry), cmdQueue(32),
+      dispdev(address.address, -1, -1, geometry, (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE),
       ui(&dispdev)
 {
-    address_found = address;
     cmdQueue.setReader(this);
 }
 // #endif
@@ -941,6 +951,9 @@ void Screen::handleSetOn(bool on)
     if (on != screenOn) {
         if (on) {
             LOG_INFO("Turning on screen\n");
+#ifdef T_WATCH_S3
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
+#endif
             dispdev.displayOn();
             dispdev.displayOn();
             enabled = true;
@@ -949,6 +962,9 @@ void Screen::handleSetOn(bool on)
         } else {
             LOG_INFO("Turning off screen\n");
             dispdev.displayOff();
+#ifdef T_WATCH_S3
+            PMU->disablePowerOutput(XPOWERS_ALDO2);
+#endif
             enabled = false;
         }
         screenOn = on;
@@ -962,9 +978,11 @@ void Screen::setup()
     useDisplay = true;
 
 #ifdef AutoOLEDWire_h
-    if (screen_model == meshtastic_Config_DisplayConfig_OledType_OLED_SH1107)
-        screen_model = meshtastic_Config_DisplayConfig_OledType_OLED_SH1106;
-    dispdev.setDetected(screen_model);
+    dispdev.setDetected(model);
+#endif
+
+#ifdef USE_SH1107_128_64
+    dispdev.setSubtype(7);
 #endif
 
     // Initialising the UI will init the display too.
@@ -1029,12 +1047,18 @@ void Screen::setup()
 #endif
     serialSinceMsec = millis();
 
+#if HAS_TOUCHSCREEN
+    touchScreenImpl1 = new TouchScreenImpl1(dispdev.getWidth(), dispdev.getHeight(), dispdev.getTouch);
+    touchScreenImpl1->init();
+#endif
+
     // Subscribe to status updates
     powerStatusObserver.observe(&powerStatus->onNewStatus);
     gpsStatusObserver.observe(&gpsStatus->onNewStatus);
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
     if (textMessageModule)
         textMessageObserver.observe(textMessageModule);
+    inputObserver.observe(inputBroker);
 
     // Modules can notify screen about refresh
     MeshModule::observeUIEvents(&uiFrameEventObserver);
@@ -1112,6 +1136,12 @@ int32_t Screen::runOnce()
                 handleOnPress();
             }
             break;
+        case Cmd::SHOW_PREV_FRAME:
+            handleShowPrevFrame();
+            break;
+        case Cmd::SHOW_NEXT_FRAME:
+            handleShowNextFrame();
+            break;
         case Cmd::START_BLUETOOTH_PIN_SCREEN:
             handleStartBluetoothPinScreen(cmd.bluetooth_pin);
             break;
@@ -1199,7 +1229,7 @@ void Screen::drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiStat
  * it is expected that this will be used during the boot phase */
 void Screen::setSSLFrames()
 {
-    if (address_found) {
+    if (address_found.address) {
         // LOG_DEBUG("showing SSL frames\n");
         static FrameCallback sslFrames[] = {drawSSLScreen};
         ui.setFrames(sslFrames, 1);
@@ -1211,7 +1241,7 @@ void Screen::setSSLFrames()
  * it is expected that this will be used during the boot phase */
 void Screen::setWelcomeFrames()
 {
-    if (address_found) {
+    if (address_found.address) {
         // LOG_DEBUG("showing Welcome frames\n");
         ui.disableAllIndicators();
 
@@ -1229,13 +1259,15 @@ void Screen::setFrames()
 
     moduleFrames = MeshModule::GetMeshModulesWithUIFrames();
     LOG_DEBUG("Showing %d module frames\n", moduleFrames.size());
+#ifdef DEBUG_PORT
     int totalFrameCount = MAX_NUM_NODES + NUM_EXTRA_FRAMES + moduleFrames.size();
     LOG_DEBUG("Total frame count: %d\n", totalFrameCount);
+#endif
 
     // We don't show the node info our our node (if we have it yet - we should)
-    size_t numnodes = nodeStatus->getNumTotal();
-    if (numnodes > 0)
-        numnodes--;
+    size_t numMeshNodes = nodeDB.getNumMeshNodes();
+    if (numMeshNodes > 0)
+        numMeshNodes--;
 
     size_t numframes = 0;
 
@@ -1252,17 +1284,21 @@ void Screen::setFrames()
     LOG_DEBUG("Added modules.  numframes: %d\n", numframes);
 
     // If we have a critical fault, show it first
-    if (myNodeInfo.error_code)
+    if (error_code)
         normalFrames[numframes++] = drawCriticalFaultFrame;
 
     // If we have a text message - show it next, unless it's a phone message and we aren't using any special modules
     if (devicestate.has_rx_text_message && shouldDrawMessage(&devicestate.rx_text_message)) {
         normalFrames[numframes++] = drawTextMessageFrame;
     }
+    // If we have a waypoint - show it next, unless it's a phone message and we aren't using any special modules
+    if (devicestate.has_rx_waypoint && shouldDrawMessage(&devicestate.rx_waypoint)) {
+        normalFrames[numframes++] = drawWaypointFrame;
+    }
 
     // then all the nodes
     // We only show a few nodes in our scrolling list - because meshes with many nodes would have too many screens
-    size_t numToShow = min(numnodes, 4U);
+    size_t numToShow = min(numMeshNodes, 4U);
     for (size_t i = 0; i < numToShow; i++)
         normalFrames[numframes++] = drawNodeInfo;
 
@@ -1360,6 +1396,23 @@ void Screen::blink()
     dispdev.setBrightness(brightness);
 }
 
+std::string Screen::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t minutes, uint32_t seconds)
+{
+    std::string uptime;
+
+    if (days > (hours_in_month * 6))
+        uptime = "?";
+    else if (days >= 2)
+        uptime = std::to_string(days) + "d";
+    else if (hours >= 2)
+        uptime = std::to_string(hours) + "h";
+    else if (minutes >= 1)
+        uptime = std::to_string(minutes) + "m";
+    else
+        uptime = std::to_string(seconds) + "s";
+    return uptime;
+}
+
 void Screen::handlePrint(const char *text)
 {
     // the string passed into us probably has a newline, but that would confuse the logging system
@@ -1382,6 +1435,28 @@ void Screen::handleOnPress()
     }
 }
 
+void Screen::handleShowPrevFrame()
+{
+    // If screen was off, just wake it, otherwise go back to previous frame
+    // If we are in a transition, the press must have bounced, drop it.
+    if (ui.getUiState()->frameState == FIXED) {
+        ui.previousFrame();
+        lastScreenTransition = millis();
+        setFastFramerate();
+    }
+}
+
+void Screen::handleShowNextFrame()
+{
+    // If screen was off, just wake it, otherwise advance to next frame
+    // If we are in a transition, the press must have bounced, drop it.
+    if (ui.getUiState()->frameState == FIXED) {
+        ui.nextFrame();
+        lastScreenTransition = millis();
+        setFastFramerate();
+    }
+}
+
 #ifndef SCREEN_TRANSITION_FRAMERATE
 #define SCREEN_TRANSITION_FRAMERATE 30 // fps
 #endif
@@ -1398,8 +1473,6 @@ void Screen::setFastFramerate()
 
 void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    displayedNodeNum = 0; // Not currently showing a node pane
-
     display->setFont(FONT_SMALL);
 
     // The coordinates define the left starting point of the text
@@ -1439,11 +1512,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     }
     // Display GPS status
     if (!config.position.gps_enabled) {
-        int16_t yPos = y + 2;
-#ifdef GPS_POWER_TOGGLE
-        yPos = (y + 10 + FONT_HEIGHT_SMALL);
-#endif
-        drawGPSpowerstat(display, x, yPos, gpsStatus);
+        drawGPSpowerstat(display, x, y + 2, gpsStatus);
     } else {
         if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
             drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
@@ -1460,7 +1529,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #ifdef ARCH_ESP32
         if (millis() - storeForwardModule->lastHeartbeat >
             (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
@@ -1470,7 +1540,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 16, 8,
@@ -1482,7 +1553,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         }
 #endif
     } else {
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
@@ -1511,8 +1583,6 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 #if HAS_WIFI
     const char *wifiName = config.network.wifi_ssid;
 
-    displayedNodeNum = 0; // Not currently showing a node pane
-
     display->setFont(FONT_SMALL);
 
     // The coordinates define the left starting point of the text
@@ -1643,8 +1713,6 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 
 void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    displayedNodeNum = 0; // Not currently showing a node pane
-
     display->setFont(FONT_SMALL);
 
     // The coordinates define the left starting point of the text
@@ -1695,6 +1763,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         mode = "LongF";
         break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        mode = "LongM";
+        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
         mode = "VeryL";
         break;
@@ -1721,15 +1792,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     display->setColor(WHITE);
 
     // Show uptime as days, hours, minutes OR seconds
-    String uptime;
-    if (days >= 2)
-        uptime += String(days) + "d ";
-    else if (hours >= 2)
-        uptime += String(hours) + "h ";
-    else if (minutes >= 1)
-        uptime += String(minutes) + "m ";
-    else
-        uptime += String(seconds) + "s ";
+    std::string uptime = screen->drawTimeDelta(days, hours, minutes, seconds);
 
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
     if (rtc_sec > 0) {
@@ -1744,12 +1807,12 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
         int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
         int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
 
-        char timebuf[9];
-        snprintf(timebuf, sizeof(timebuf), "%02d:%02d:%02d", hour, min, sec);
+        char timebuf[10];
+        snprintf(timebuf, sizeof(timebuf), " %02d:%02d:%02d", hour, min, sec);
         uptime += timebuf;
     }
 
-    display->drawString(x, y + FONT_HEIGHT_SMALL * 1, uptime);
+    display->drawString(x, y + FONT_HEIGHT_SMALL * 1, uptime.c_str());
 
     // Display Channel Utilization
     char chUtil[13];
@@ -1765,6 +1828,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
         drawGPScoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
     } else {
         drawGPSpowerstat(display, x - (SCREEN_WIDTH / 4), y + FONT_HEIGHT_SMALL * 2, gpsStatus);
+#ifdef GPS_POWER_TOGGLE
+        display->drawString(x + 30, (y + FONT_HEIGHT_SMALL * 3), " by button");
+#endif
     }
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
@@ -1773,7 +1839,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     heartbeat = !heartbeat;
 #endif
 }
-// adjust Brightness cycle trough 1 to 254 as long as attachDuringLongPress is true
+// adjust Brightness cycle through 1 to 254 as long as attachDuringLongPress is true
 void Screen::adjustBrightness()
 {
     if (!useDisplay)
@@ -1831,6 +1897,21 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
     return 0;
 }
 
-} // namespace graphics
+int Screen::handleInputEvent(const InputEvent *event)
+{
+    if (showingNormalScreen && moduleFrames.size() == 0) {
+        LOG_DEBUG("Screen::handleInputEvent from %s\n", event->source);
+        if (event->inputEvent == static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) {
+            showPrevFrame();
+        } else if (event->inputEvent == static_cast<char>(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT)) {
+            showNextFrame();
+        }
+    }
 
-#endif // HAS_SCREEN
+    return 0;
+}
+
+} // namespace graphics
+#else
+graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -2,6 +2,10 @@
 
 #include "configuration.h"
 
+#include "detect/ScanI2C.h"
+#include "mesh/generated/meshtastic/config.pb.h"
+#include <OLEDDisplay.h>
+
 #if !HAS_SCREEN
 #include "power.h"
 namespace graphics
@@ -10,7 +14,7 @@ namespace graphics
 class Screen
 {
   public:
-    explicit Screen(char) {}
+    explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
     void onPress() {}
     void setup() {}
     void setOn(bool) {}
@@ -21,10 +25,10 @@ class Screen
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
     void startRebootScreen() {}
+    void startShutdownScreen() {}
     void startFirmwareUpdateScreen() {}
 };
 } // namespace graphics
-
 #else
 #include <cstring>
 
@@ -34,7 +38,7 @@ class Screen
 
 #ifdef USE_ST7567
 #include <ST7567Wire.h>
-#elif defined(USE_SH1106) || defined(USE_SH1107)
+#elif defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
 #include <SH1106Wire.h>
 #elif defined(USE_SSD1306)
 #include <SSD1306Wire.h>
@@ -49,6 +53,7 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
+#include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "power.h"
 #include <string>
@@ -114,14 +119,18 @@ class Screen : public concurrency::OSThread
         CallbackObserver<Screen, const meshtastic_MeshPacket *>(this, &Screen::handleTextMessage);
     CallbackObserver<Screen, const UIFrameEvent *> uiFrameEventObserver =
         CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent);
+    CallbackObserver<Screen, const InputEvent *> inputObserver =
+        CallbackObserver<Screen, const InputEvent *>(this, &Screen::handleInputEvent);
 
   public:
-    explicit Screen(uint8_t address, int sda = -1, int scl = -1);
+    explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
 
     Screen(const Screen &) = delete;
     Screen &operator=(const Screen &) = delete;
 
-    uint8_t address_found;
+    ScanI2C::DeviceAddress address_found;
+    meshtastic_Config_DisplayConfig_OledType model;
+    OLEDDISPLAY_GEOMETRY geometry;
 
     /// Initializes the UI, turns on the display, starts showing boot screen.
     //
@@ -146,8 +155,10 @@ class Screen : public concurrency::OSThread
 
     void blink();
 
-    /// Handles a button press.
+    /// Handle button press, trackball or swipe action)
     void onPress() { enqueueCmd(ScreenCmd{.cmd = Cmd::ON_PRESS}); }
+    void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
+    void showNextFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_NEXT_FRAME}); }
 
     // Implementation to Adjust Brightness
     void adjustBrightness();
@@ -206,6 +217,9 @@ class Screen : public concurrency::OSThread
         }
     }
 
+    /// generates a very brief time delta display
+    std::string drawTimeDelta(uint32_t days, uint32_t hours, uint32_t minutes, uint32_t seconds);
+
     /// Overrides the default utf8 character conversion, to replace empty space with question marks
     static char customFontTableLookup(const uint8_t ch)
     {
@@ -237,6 +251,12 @@ class Screen : public concurrency::OSThread
         // library have empty chars for non-latin ASCII symbols
         case 0xD0: {
             SKIPREST = false;
+            if (ch == 132)
+                return (uint8_t)(170); // Є
+            if (ch == 134)
+                return (uint8_t)(178); // І
+            if (ch == 135)
+                return (uint8_t)(175); // Ї
             if (ch == 129)
                 return (uint8_t)(168); // Ё
             if (ch > 143 && ch < 192)
@@ -245,12 +265,26 @@ class Screen : public concurrency::OSThread
         }
         case 0xD1: {
             SKIPREST = false;
+            if (ch == 148)
+                return (uint8_t)(186); // є
+            if (ch == 150)
+                return (uint8_t)(179); // і
+            if (ch == 151)
+                return (uint8_t)(191); // ї
             if (ch == 145)
                 return (uint8_t)(184); // ё
             if (ch > 127 && ch < 144)
                 return (uint8_t)(ch + 112);
             break;
         }
+        case 0xD2: {
+            SKIPREST = false;
+            if (ch == 144)
+                return (uint8_t)(165); // Ґ
+            if (ch == 145)
+                return (uint8_t)(180); // ґ
+            break;
+        }
         }
 
         // We want to strip out prefix chars for two-byte char formats
@@ -272,9 +306,11 @@ class Screen : public concurrency::OSThread
     // Use this handle to set things like battery status, user count, GPS status, etc.
     DebugInfo *debug_info() { return &debugInfo; }
 
+    // Handle observer events
     int handleStatusUpdate(const meshtastic::Status *arg);
     int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
+    int handleInputEvent(const InputEvent *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
     void forceDisplay();
@@ -314,6 +350,8 @@ class Screen : public concurrency::OSThread
     // Implementations of various commands, called from doTask().
     void handleSetOn(bool on);
     void handleOnPress();
+    void handleShowNextFrame();
+    void handleShowPrevFrame();
     void handleStartBluetoothPinScreen(uint32_t pin);
     void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
@@ -347,11 +385,11 @@ class Screen : public concurrency::OSThread
 
     /// Display device
 
-#if defined(USE_SH1106) || defined(USE_SH1107)
+#if defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
     SH1106Wire dispdev;
 #elif defined(USE_SSD1306)
     SSD1306Wire dispdev;
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
     TFTDisplay dispdev;
 #elif defined(USE_EINK)
     EInkDisplay dispdev;
@@ -365,4 +403,4 @@ class Screen : public concurrency::OSThread
 };
 
 } // namespace graphics
-#endif
+#endif

src/graphics/TFTDisplay.cpp

@@ -1,14 +1,324 @@
 #include "configuration.h"
 
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER)
-#include "SPILock.h"
-#include "TFTDisplay.h"
-#include <SPI.h>
-#include <TFT_eSPI.h> // Graphics and font library for ST7735 driver chip
+#ifndef TFT_BACKLIGHT_ON
+#define TFT_BACKLIGHT_ON HIGH
+#endif
+
+// convert 24-bit color to 16-bit (56K)
+#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+#define TFT_MESH COLOR565(0x67, 0xEA, 0x94)
+
+#if defined(ST7735S)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7735_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7735_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7735S _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = ST7735_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7735_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7735_SDA;          // Set SPI MOSI pin number
+            cfg.pin_miso = ST7735_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7735_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7735_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7735_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7735_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = true;             // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7735_BL; // Pin number to which the backlight is connected
+            cfg.invert = true;      // true to invert the brightness of the backlight
+            // cfg.freq = 44100;    // PWM frequency of backlight
+            // cfg.pwm_channel = 1; // PWM channel number to use
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX tft;
+
+#elif defined(ST7789_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+
+#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ST7789_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7789 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+#ifdef T_WATCH_S3
+    lgfx::Touch_FT5x06 _touch_instance;
+#else
+    lgfx::Touch_GT911 _touch_instance;
+#endif
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // SPI
+            cfg.spi_host = ST7789_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+            cfg.pin_sclk = ST7789_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7789_SDA;          // Set SPI MOSI pin number
+            cfg.pin_miso = ST7789_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7789_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is mirrored)
+            cfg.dummy_read_pixel = 9;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = true;             // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            // cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            // cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control. (delete if not necessary)
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7789_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;     // true to invert the brightness of the backlight
+            // cfg.pwm_channel = 0;
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        // Configure settings for touch screen control.
+        {
+            auto cfg = _touch_instance.config();
+
+            cfg.pin_cs = -1;
+            cfg.x_min = 0;
+            cfg.x_max = TFT_HEIGHT - 1;
+            cfg.y_min = 0;
+            cfg.y_max = TFT_WIDTH - 1;
+            cfg.pin_int = SCREEN_TOUCH_INT;
+            cfg.bus_shared = true;
+            cfg.offset_rotation = 0;
+            // cfg.freq = 2500000;
+
+            // I2C
+            cfg.i2c_port = TOUCH_I2C_PORT;
+            cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+#ifdef SCREEN_TOUCH_USE_I2C1
+            cfg.pin_sda = I2C_SDA1;
+            cfg.pin_scl = I2C_SCL1;
+#else
+            cfg.pin_sda = I2C_SDA;
+            cfg.pin_scl = I2C_SCL;
+#endif
+            // cfg.freq = 400000;
+
+            _touch_instance.config(cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+
+        setPanel(&_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX tft;
+
+#elif defined(ILI9341_DRIVER)
+
+#include <LovyanGFX.hpp> // Graphics and font library for ILI9341 driver chip
+
+#if defined(ILI9341_BACKLIGHT_EN) && !defined(TFT_BL)
+#define TFT_BL ILI9341_BACKLIGHT_EN
+#endif
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ILI9341 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // configure SPI
+            cfg.spi_host = ILI9341_SPI_HOST; // ESP32-S2,S3,C3 : SPI2_HOST or SPI3_HOST / ESP32 : VSPI_HOST or HSPI_HOST
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = TFT_SCLK;            // Set SPI SCLK pin number
+            cfg.pin_mosi = TFT_MOSI;            // Set SPI MOSI pin number
+            cfg.pin_miso = TFT_MISO;            // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = TFT_DC;                // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = TFT_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = TFT_RST;   // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = TFT_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // The following setting values ​​are general initial values ​​for each panel, so please comment out any
+            // unknown items and try them.
+
+            cfg.panel_width = TFT_WIDTH;   // actual displayable width
+            cfg.panel_height = TFT_HEIGHT; // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;   // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;   // Panel offset amount in Y direction
+            cfg.offset_rotation = 0;       // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;           // Set to true if data can be read
+            cfg.invert = false;            // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            // Set the following only when the display is shifted with a driver with a variable number of pixels, such as the
+            // ST7735 or ILI9163.
+            cfg.memory_width = TFT_WIDTH;   // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT; // Maximum height supported by the driver IC
+            _panel_instance.config(cfg);
+        }
+
+        // Set the backlight control
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;  // true to invert the brightness of the backlight
+            // cfg.freq = 44100;    // PWM frequency of backlight
+            // cfg.pwm_channel = 1; // PWM channel number to use
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX tft;
+
+#elif defined(ST7735_CS)
+#include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
 
 static TFT_eSPI tft = TFT_eSPI(); // Invoke library, pins defined in User_Setup.h
 
-TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, uint8_t screen_model)
+#endif
+
+#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER)
+#include "SPILock.h"
+#include "TFTDisplay.h"
+#include <SPI.h>
+
+TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
 #ifdef SCREEN_ROTATE
     setGeometry(GEOMETRY_RAWMODE, TFT_HEIGHT, TFT_WIDTH);
@@ -30,7 +340,7 @@ void TFTDisplay::display(void)
             auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
             auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
             if (isset != dblbuf_isset) {
-                tft.drawPixel(x, y, isset ? TFT_WHITE : TFT_BLACK);
+                tft.drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
             }
         }
     }
@@ -46,8 +356,55 @@ void TFTDisplay::display(void)
 // Send a command to the display (low level function)
 void TFTDisplay::sendCommand(uint8_t com)
 {
-    (void)com;
-    // Drop all commands to device (we just update the buffer)
+    // handle display on/off directly
+    switch (com) {
+    case DISPLAYON: {
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, LOW);
+#endif
+#ifndef M5STACK
+        tft.setBrightness(128);
+#endif
+        break;
+    }
+    case DISPLAYOFF: {
+#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+        digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
+#endif
+#ifdef VTFT_CTRL
+        digitalWrite(VTFT_CTRL, HIGH);
+#endif
+#ifndef M5STACK
+        tft.setBrightness(0);
+#endif
+        break;
+    }
+    default:
+        break;
+    }
+
+    // Drop all other commands to device (we just update the buffer)
+}
+
+bool TFTDisplay::hasTouch(void)
+{
+#ifndef M5STACK
+    return tft.touch() != nullptr;
+#else
+    return false;
+#endif
+}
+
+bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
+{
+#ifndef M5STACK
+    return tft.getTouch(x, y);
+#else
+    return false;
+#endif
 }
 
 void TFTDisplay::setDetected(uint8_t detected)
@@ -62,23 +419,20 @@ bool TFTDisplay::connect()
     LOG_INFO("Doing TFT init\n");
 
 #ifdef TFT_BL
-    digitalWrite(TFT_BL, HIGH);
+    digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
     pinMode(TFT_BL, OUTPUT);
 #endif
 
-#ifdef ST7735_BACKLIGHT_EN
-    digitalWrite(ST7735_BACKLIGHT_EN, HIGH);
-    pinMode(ST7735_BACKLIGHT_EN, OUTPUT);
-#endif
     tft.init();
-#ifdef M5STACK
-    tft.setRotation(1); // M5Stack has the TFT in landscape
+#if defined(T_DECK)
+    tft.setRotation(1); // M5Stack/T-Deck have the TFT in landscape
+#elif defined(M5STACK) || defined(T_WATCH_S3)
+    tft.setRotation(0); // T-Watch S3 has the TFT in portrait
 #else
     tft.setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft.fillScreen(TFT_BLACK);
-    // tft.drawRect(0, 0, 40, 10, TFT_PURPLE); // wide rectangle in upper left
     return true;
 }
 
-#endif
+#endif

src/graphics/TFTDisplay.h

@@ -3,11 +3,10 @@
 #include <OLEDDisplay.h>
 
 /**
- * An adapter class that allows using the TFT_eSPI library as if it was an OLEDDisplay implementation.
+ * An adapter class that allows using the LovyanGFX library as if it was an OLEDDisplay implementation.
  *
  * Remaining TODO:
  * optimize display() to only draw changed pixels (see other OLED subclasses for examples)
- * implement displayOn/displayOff to turn off the TFT device (and backlight)
  * Use the fast NRF52 SPI API rather than the slow standard arduino version
  *
  * turn radio back on - currently with both on spi bus is fucked? or are we leaving chip select asserted?
@@ -18,11 +17,15 @@ class TFTDisplay : public OLEDDisplay
     /* constructor
     FIXME - the parameters are not used, just a temporary hack to keep working like the old displays
     */
-    TFTDisplay(uint8_t address, int sda, int scl, uint8_t screen_model);
+    TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
     // Write the buffer to the display memory
     virtual void display(void) override;
 
+    // Touch screen (static handlers)
+    static bool hasTouch(void);
+    static bool getTouch(int16_t *x, int16_t *y);
+
     /**
      * shim to make the abstraction happy
      *
@@ -38,4 +41,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-};
+};

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -0,0 +1,424 @@
+#include "OLEDDisplayFontsUA.h"
+
+// Font generated or edited with the glyphEditor
+const uint8_t ArialMT_Plain_10_UA[] PROGMEM = {
+    0x0A, // Width: 10
+    0x0D, // Height: 13
+    0x20, // First char: 32
+    0xE0, // Number of chars: 224
+    // Jump Table:
+    0xFF, 0xFF, 0x00, 0x0A, // 32
+    0x00, 0x00, 0x04, 0x03, // 33
+    0x00, 0x04, 0x05, 0x04, // 34
+    0x00, 0x09, 0x09, 0x06, // 35
+    0x00, 0x12, 0x0A, 0x06, // 36
+    0x00, 0x1C, 0x10, 0x09, // 37
+    0x00, 0x2C, 0x0E, 0x08, // 38
+    0x00, 0x3A, 0x01, 0x02, // 39
+    0x00, 0x3B, 0x06, 0x04, // 40
+    0x00, 0x41, 0x06, 0x04, // 41
+    0x00, 0x47, 0x05, 0x04, // 42
+    0x00, 0x4C, 0x09, 0x06, // 43
+    0x00, 0x55, 0x04, 0x03, // 44
+    0x00, 0x59, 0x03, 0x03, // 45
+    0x00, 0x5C, 0x04, 0x03, // 46
+    0x00, 0x60, 0x05, 0x04, // 47
+    0x00, 0x65, 0x0A, 0x06, // 48
+    0x00, 0x6F, 0x08, 0x05, // 49
+    0x00, 0x77, 0x0A, 0x06, // 50
+    0x00, 0x81, 0x0A, 0x06, // 51
+    0x00, 0x8B, 0x0B, 0x07, // 52
+    0x00, 0x96, 0x0A, 0x06, // 53
+    0x00, 0xA0, 0x0A, 0x06, // 54
+    0x00, 0xAA, 0x09, 0x06, // 55
+    0x00, 0xB3, 0x0A, 0x06, // 56
+    0x00, 0xBD, 0x0A, 0x06, // 57
+    0x00, 0xC7, 0x04, 0x03, // 58
+    0x00, 0xCB, 0x04, 0x03, // 59
+    0x00, 0xCF, 0x0A, 0x06, // 60
+    0x00, 0xD9, 0x09, 0x06, // 61
+    0x00, 0xE2, 0x09, 0x06, // 62
+    0x00, 0xEB, 0x0B, 0x07, // 63
+    0x00, 0xF6, 0x14, 0x0B, // 64
+    0x01, 0x0A, 0x0E, 0x08, // 65
+    0x01, 0x18, 0x0C, 0x07, // 66
+    0x01, 0x24, 0x0C, 0x07, // 67
+    0x01, 0x30, 0x0B, 0x07, // 68
+    0x01, 0x3B, 0x0C, 0x07, // 69
+    0x01, 0x47, 0x09, 0x06, // 70
+    0x01, 0x50, 0x0D, 0x08, // 71
+    0x01, 0x5D, 0x0C, 0x07, // 72
+    0x01, 0x69, 0x04, 0x03, // 73
+    0x01, 0x6D, 0x08, 0x05, // 74
+    0x01, 0x75, 0x0E, 0x08, // 75
+    0x01, 0x83, 0x0C, 0x07, // 76
+    0x01, 0x8F, 0x10, 0x09, // 77
+    0x01, 0x9F, 0x0C, 0x07, // 78
+    0x01, 0xAB, 0x0E, 0x08, // 79
+    0x01, 0xB9, 0x0B, 0x07, // 80
+    0x01, 0xC4, 0x0E, 0x08, // 81
+    0x01, 0xD2, 0x0C, 0x07, // 82
+    0x01, 0xDE, 0x0C, 0x07, // 83
+    0x01, 0xEA, 0x0B, 0x07, // 84
+    0x01, 0xF5, 0x0C, 0x07, // 85
+    0x02, 0x01, 0x0D, 0x08, // 86
+    0x02, 0x0E, 0x11, 0x0A, // 87
+    0x02, 0x1F, 0x0E, 0x08, // 88
+    0x02, 0x2D, 0x0D, 0x08, // 89
+    0x02, 0x3A, 0x0C, 0x07, // 90
+    0x02, 0x46, 0x06, 0x04, // 91
+    0x02, 0x4C, 0x06, 0x04, // 92
+    0x02, 0x52, 0x04, 0x03, // 93
+    0x02, 0x56, 0x09, 0x06, // 94
+    0x02, 0x5F, 0x0C, 0x07, // 95
+    0x02, 0x6B, 0x03, 0x03, // 96
+    0x02, 0x6E, 0x0A, 0x06, // 97
+    0x02, 0x78, 0x0A, 0x06, // 98
+    0x02, 0x82, 0x0A, 0x06, // 99
+    0x02, 0x8C, 0x0A, 0x06, // 100
+    0x02, 0x96, 0x0A, 0x06, // 101
+    0x02, 0xA0, 0x05, 0x04, // 102
+    0x02, 0xA5, 0x0A, 0x06, // 103
+    0x02, 0xAF, 0x0A, 0x06, // 104
+    0x02, 0xB9, 0x04, 0x03, // 105
+    0x02, 0xBD, 0x04, 0x03, // 106
+    0x02, 0xC1, 0x08, 0x05, // 107
+    0x02, 0xC9, 0x04, 0x03, // 108
+    0x02, 0xCD, 0x10, 0x09, // 109
+    0x02, 0xDD, 0x0A, 0x06, // 110
+    0x02, 0xE7, 0x0A, 0x06, // 111
+    0x02, 0xF1, 0x0A, 0x06, // 112
+    0x02, 0xFB, 0x0A, 0x06, // 113
+    0x03, 0x05, 0x05, 0x04, // 114
+    0x03, 0x0A, 0x08, 0x05, // 115
+    0x03, 0x12, 0x06, 0x04, // 116
+    0x03, 0x18, 0x0A, 0x06, // 117
+    0x03, 0x22, 0x09, 0x06, // 118
+    0x03, 0x2B, 0x0E, 0x08, // 119
+    0x03, 0x39, 0x0A, 0x06, // 120
+    0x03, 0x43, 0x09, 0x06, // 121
+    0x03, 0x4C, 0x0A, 0x06, // 122
+    0x03, 0x56, 0x06, 0x04, // 123
+    0x03, 0x5C, 0x04, 0x03, // 124
+    0x03, 0x60, 0x05, 0x04, // 125
+    0x03, 0x65, 0x09, 0x06, // 126
+    0xFF, 0xFF, 0x00, 0x0A, // 127
+    0xFF, 0xFF, 0x00, 0x0A, // 128
+    0xFF, 0xFF, 0x00, 0x0A, // 129
+    0xFF, 0xFF, 0x00, 0x0A, // 130
+    0xFF, 0xFF, 0x00, 0x0A, // 131
+    0xFF, 0xFF, 0x00, 0x0A, // 132
+    0xFF, 0xFF, 0x00, 0x0A, // 133
+    0xFF, 0xFF, 0x00, 0x0A, // 134
+    0xFF, 0xFF, 0x00, 0x0A, // 135
+    0xFF, 0xFF, 0x00, 0x0A, // 136
+    0xFF, 0xFF, 0x00, 0x0A, // 137
+    0xFF, 0xFF, 0x00, 0x0A, // 138
+    0xFF, 0xFF, 0x00, 0x0A, // 139
+    0xFF, 0xFF, 0x00, 0x0A, // 140
+    0xFF, 0xFF, 0x00, 0x0A, // 141
+    0xFF, 0xFF, 0x00, 0x0A, // 142
+    0xFF, 0xFF, 0x00, 0x0A, // 143
+    0xFF, 0xFF, 0x00, 0x0A, // 144
+    0xFF, 0xFF, 0x00, 0x0A, // 145
+    0xFF, 0xFF, 0x00, 0x0A, // 146
+    0xFF, 0xFF, 0x00, 0x0A, // 147
+    0xFF, 0xFF, 0x00, 0x0A, // 148
+    0xFF, 0xFF, 0x00, 0x0A, // 149
+    0xFF, 0xFF, 0x00, 0x0A, // 150
+    0xFF, 0xFF, 0x00, 0x0A, // 151
+    0xFF, 0xFF, 0x00, 0x0A, // 152
+    0xFF, 0xFF, 0x00, 0x0A, // 153
+    0xFF, 0xFF, 0x00, 0x0A, // 154
+    0xFF, 0xFF, 0x00, 0x0A, // 155
+    0xFF, 0xFF, 0x00, 0x0A, // 156
+    0xFF, 0xFF, 0x00, 0x0A, // 157
+    0xFF, 0xFF, 0x00, 0x0A, // 158
+    0xFF, 0xFF, 0x00, 0x0A, // 159
+    0xFF, 0xFF, 0x00, 0x0A, // 160
+    0x03, 0x6E, 0x04, 0x03, // 161
+    0x03, 0x72, 0x0A, 0x06, // 162
+    0x03, 0x7C, 0x0C, 0x07, // 163
+    0x03, 0x88, 0x0A, 0x06, // 164
+    0x03, 0x92, 0x09, 0x06, // 165
+    0x03, 0x9B, 0x04, 0x03, // 166
+    0x03, 0x9F, 0x0A, 0x06, // 167
+    0x03, 0xA9, 0x0C, 0x07, // 168
+    0x03, 0xB5, 0x0D, 0x08, // 169
+    0x03, 0xC2, 0x0C, 0x07, // 170
+    0x03, 0xCE, 0x0A, 0x06, // 171
+    0x03, 0xD8, 0x09, 0x06, // 172
+    0x03, 0xE1, 0x03, 0x03, // 173
+    0x03, 0xE4, 0x0D, 0x08, // 174
+    0x03, 0xF1, 0x0C, 0x07, // 175
+    0x03, 0xFD, 0x07, 0x05, // 176
+    0x04, 0x04, 0x0A, 0x06, // 177
+    0x04, 0x0E, 0x0C, 0x07, // 178
+    0x04, 0x1A, 0x0C, 0x07, // 179
+    0x04, 0x26, 0x07, 0x05, // 180
+    0x04, 0x2D, 0x0A, 0x06, // 181
+    0x04, 0x37, 0x09, 0x06, // 182
+    0x04, 0x40, 0x03, 0x03, // 183
+    0x04, 0x43, 0x0B, 0x07, // 184
+    0x04, 0x4E, 0x0B, 0x07, // 185
+    0x04, 0x59, 0x0C, 0x07, // 186
+    0x04, 0x65, 0x0A, 0x06, // 187
+    0x04, 0x6F, 0x10, 0x09, // 188
+    0x04, 0x7F, 0x10, 0x09, // 189
+    0x04, 0x8F, 0x10, 0x09, // 190
+    0x04, 0x9F, 0x0A, 0x06, // 191
+    0x04, 0xA9, 0x0C, 0x07, // 192
+    0x04, 0xB5, 0x0C, 0x07, // 193
+    0x04, 0xC1, 0x0C, 0x07, // 194
+    0x04, 0xCD, 0x0B, 0x07, // 195
+    0x04, 0xD8, 0x0C, 0x07, // 196
+    0x04, 0xE4, 0x0C, 0x07, // 197
+    0x04, 0xF0, 0x0C, 0x07, // 198
+    0x04, 0xFC, 0x0C, 0x07, // 199
+    0x05, 0x08, 0x0C, 0x07, // 200
+    0x05, 0x14, 0x0C, 0x07, // 201
+    0x05, 0x20, 0x0C, 0x07, // 202
+    0x05, 0x2C, 0x0C, 0x07, // 203
+    0x05, 0x38, 0x0C, 0x07, // 204
+    0x05, 0x44, 0x0C, 0x07, // 205
+    0x05, 0x50, 0x0C, 0x07, // 206
+    0x05, 0x5C, 0x0C, 0x07, // 207
+    0x05, 0x68, 0x0B, 0x07, // 208
+    0x05, 0x73, 0x0C, 0x07, // 209
+    0x05, 0x7F, 0x0B, 0x07, // 210
+    0x05, 0x8A, 0x0C, 0x07, // 211
+    0x05, 0x96, 0x0B, 0x07, // 212
+    0x05, 0xA1, 0x0C, 0x07, // 213
+    0x05, 0xAD, 0x0C, 0x07, // 214
+    0x05, 0xB9, 0x0C, 0x07, // 215
+    0x05, 0xC5, 0x0C, 0x07, // 216
+    0x05, 0xD1, 0x0E, 0x08, // 217
+    0x05, 0xDF, 0x0C, 0x07, // 218
+    0x05, 0xEB, 0x0C, 0x07, // 219
+    0x05, 0xF7, 0x0C, 0x07, // 220
+    0x06, 0x03, 0x0C, 0x07, // 221
+    0x06, 0x0F, 0x0C, 0x07, // 222
+    0x06, 0x1B, 0x0C, 0x07, // 223
+    0x06, 0x27, 0x0C, 0x07, // 224
+    0x06, 0x33, 0x0C, 0x07, // 225
+    0x06, 0x3F, 0x0C, 0x07, // 226
+    0x06, 0x4B, 0x0B, 0x07, // 227
+    0x06, 0x56, 0x0C, 0x07, // 228
+    0x06, 0x62, 0x0B, 0x07, // 229
+    0x06, 0x6D, 0x0C, 0x07, // 230
+    0x06, 0x79, 0x0C, 0x07, // 231
+    0x06, 0x85, 0x0C, 0x07, // 232
+    0x06, 0x91, 0x0C, 0x07, // 233
+    0x06, 0x9D, 0x0C, 0x07, // 234
+    0x06, 0xA9, 0x0C, 0x07, // 235
+    0x06, 0xB5, 0x0C, 0x07, // 236
+    0x06, 0xC1, 0x0C, 0x07, // 237
+    0x06, 0xCD, 0x0C, 0x07, // 238
+    0x06, 0xD9, 0x0C, 0x07, // 239
+    0x06, 0xE5, 0x0B, 0x07, // 240
+    0x06, 0xF0, 0x0C, 0x07, // 241
+    0x06, 0xFC, 0x0B, 0x07, // 242
+    0x07, 0x07, 0x0C, 0x07, // 243
+    0x07, 0x13, 0x0B, 0x07, // 244
+    0x07, 0x1E, 0x0C, 0x07, // 245
+    0x07, 0x2A, 0x0C, 0x07, // 246
+    0x07, 0x36, 0x0C, 0x07, // 247
+    0x07, 0x42, 0x0C, 0x07, // 248
+    0x07, 0x4E, 0x0E, 0x08, // 249
+    0x07, 0x5C, 0x0C, 0x07, // 250
+    0x07, 0x68, 0x0C, 0x07, // 251
+    0x07, 0x74, 0x0C, 0x07, // 252
+    0x07, 0x80, 0x0C, 0x07, // 253
+    0x07, 0x8C, 0x0C, 0x07, // 254
+    0x07, 0x98, 0x0C, 0x07, // 255
+    // Font Data:
+    0x00, 0x00, 0xF8, 0x02,                                                                                                 // 33
+    0x38, 0x00, 0x00, 0x00, 0x38,                                                                                           // 34
+    0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8,                                                                   // 35
+    0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01,                                                             // 36
+    0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01,                         // 37
+    0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02,                                     // 38
+    0x38,                                                                                                                   // 39
+    0xE0, 0x03, 0x10, 0x04, 0x08, 0x08,                                                                                     // 40
+    0x08, 0x08, 0x10, 0x04, 0xE0, 0x03,                                                                                     // 41
+    0x28, 0x00, 0x18, 0x00, 0x28,                                                                                           // 42
+    0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40,                                                                   // 43
+    0x00, 0x00, 0x00, 0x06,                                                                                                 // 44
+    0x80, 0x00, 0x80,                                                                                                       // 45
+    0x00, 0x00, 0x00, 0x02,                                                                                                 // 46
+    0x00, 0x03, 0xE0, 0x00, 0x18,                                                                                           // 47
+    0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                                             // 48
+    0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                                         // 49
+    0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02,                                                             // 50
+    0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 51
+    0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80,                                                       // 52
+    0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01,                                                             // 53
+    0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01,                                                             // 54
+    0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08,                                                                   // 55
+    0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 56
+    0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01,                                                             // 57
+    0x00, 0x00, 0x20, 0x02,                                                                                                 // 58
+    0x00, 0x00, 0x20, 0x06,                                                                                                 // 59
+    0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 60
+    0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0,                                                                   // 61
+    0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                                                   // 62
+    0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30,                                                       // 63
+    0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 65
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                                                 // 66
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 67
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0,                                                       // 68
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 69
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08,                                                                   // 70
+    0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0,                                           // 71
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 72
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 73
+    0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                                         // 74
+    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 75
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 76
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03,                         // 77
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                                                 // 78
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 79
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                       // 80
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02,                                     // 81
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03,                                                 // 82
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                                                 // 83
+    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                                       // 84
+    0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 85
+    0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08,                                           // 86
+    0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18,                   // 87
+    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 88
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                                           // 89
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 90
+    0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08,                                                                                     // 91
+    0x18, 0x00, 0xE0, 0x00, 0x00, 0x03,                                                                                     // 92
+    0x08, 0x08, 0xF8, 0x0F,                                                                                                 // 93
+    0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40,                                                                   // 94
+    0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08,                                                 // 95
+    0x08, 0x00, 0x10,                                                                                                       // 96
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,                                                             // 97
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 98
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01,                                                             // 99
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03,                                                             // 100
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                                                             // 101
+    0x20, 0x00, 0xF0, 0x03, 0x28,                                                                                           // 102
+    0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07,                                                             // 103
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 104
+    0x00, 0x00, 0xE8, 0x03,                                                                                                 // 105
+    0x00, 0x08, 0xE8, 0x07,                                                                                                 // 106
+    0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02,                                                                         // 107
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 108
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                         // 109
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 110
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 111
+    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 112
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F,                                                             // 113
+    0x00, 0x00, 0xE0, 0x03, 0x20,                                                                                           // 114
+    0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01,                                                                         // 115
+    0x20, 0x00, 0xF8, 0x03, 0x20, 0x02,                                                                                     // 116
+    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 117
+    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20,                                                                   // 118
+    0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01,                                     // 119
+    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                             // 120
+    0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20,                                                                   // 121
+    0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 122
+    0x80, 0x00, 0x78, 0x0F, 0x08, 0x08,                                                                                     // 123
+    0x00, 0x00, 0xF8, 0x0F,                                                                                                 // 124
+    0x08, 0x08, 0x78, 0x0F, 0x80,                                                                                           // 125
+    0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0,                                                                   // 126
+    0x00, 0x00, 0xA0, 0x0F,                                                                                                 // 161
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01,                                                             // 162
+    0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02,                                                 // 163
+    0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01,                                                             // 164
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x0C,                                                                   // 165
+    0x00, 0x00, 0x38, 0x0F,                                                                                                 // 166
+    0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05,                                                             // 167
+    0x00, 0x00, 0xE0, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0x20, 0x02,                                                 // 168
+    0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0,                                           // 169
+    0x00, 0x00, 0xF0, 0x01, 0x58, 0x03, 0x48, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 170
+    0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02,                                                             // 171
+    0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0,                                                                   // 172
+    0x80, 0x00, 0x80,                                                                                                       // 173
+    0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0,                                           // 174
+    0x00, 0x00, 0x08, 0x02, 0x0A, 0x02, 0xF8, 0x03, 0x0A, 0x02, 0x08, 0x02,                                                 // 175
+    0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38,                                                                               // 176
+    0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02,                                                             // 177
+    0x00, 0x00, 0x08, 0x02, 0x08, 0x02, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02,                                                 // 178
+    0x00, 0x00, 0x20, 0x02, 0x20, 0x02, 0xE8, 0x03, 0x20, 0x02, 0x20, 0x02,                                                 // 179
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x30,                                                                               // 180
+    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 181
+    0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08,                                                                   // 182
+    0x00, 0x00, 0x40,                                                                                                       // 183
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0xC0,                                                       // 184
+    0x00, 0x00, 0xF0, 0x03, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x03, 0x08,                                                       // 185
+    0x00, 0x00, 0xE0, 0x01, 0x50, 0x02, 0x50, 0x02, 0x10, 0x02, 0x20, 0x01,                                                 // 186
+    0x00, 0x00, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01,                                                             // 187
+    0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0xC0, 0x00, 0x20, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01,                         // 188
+    0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02,                         // 189
+    0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01,                         // 190
+    0x00, 0x00, 0x00, 0x00, 0x28, 0x02, 0xE0, 0x03, 0x28, 0x02,                                                             // 191
+    0x00, 0x00, 0xF0, 0x03, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x03,                                                 // 192
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x88, 0x01,                                                 // 193
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                 // 194
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x18,                                                       // 195
+    0x00, 0x00, 0x00, 0x02, 0xFC, 0x03, 0x04, 0x02, 0xFC, 0x03, 0x00, 0x02,                                                 // 196
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x08, 0x02,                                                 // 197
+    0x00, 0x00, 0xB8, 0x03, 0x40, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xB8, 0x03,                                                 // 198
+    0x00, 0x00, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                 // 199
+    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x40, 0x00, 0x20, 0x00, 0xF8, 0x03,                                                 // 200
+    0x00, 0x00, 0xE0, 0x03, 0x08, 0x01, 0x90, 0x00, 0x48, 0x00, 0xE0, 0x03,                                                 // 201
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xA0, 0x00, 0x10, 0x01, 0x08, 0x02,                                                 // 202
+    0x00, 0x00, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03,                                                 // 203
+    0x00, 0x00, 0xF8, 0x03, 0x10, 0x00, 0x60, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                 // 204
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 205
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                                 // 206
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03,                                                 // 207
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                       // 208
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 209
+    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                                       // 210
+    0x00, 0x00, 0x38, 0x00, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0xF8, 0x01,                                                 // 211
+    0x00, 0x00, 0x70, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x88, 0x00, 0x70,                                                       // 212
+    0x00, 0x00, 0x18, 0x03, 0xA0, 0x00, 0x40, 0x00, 0xA0, 0x00, 0x18, 0x03,                                                 // 213
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02,                                                 // 214
+    0x00, 0x00, 0x38, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 215
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03,                                                 // 216
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x06,                                     // 217
+    0x00, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01,                                                 // 218
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, 0xF8, 0x03,                                                 // 219
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01,                                                 // 220
+    0x00, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                                                 // 221
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xF0, 0x01, 0x08, 0x02, 0xF0, 0x01,                                                 // 222
+    0x00, 0x00, 0x30, 0x02, 0x48, 0x01, 0xC8, 0x00, 0x48, 0x00, 0xF8, 0x03,                                                 // 223
+    0x00, 0x00, 0x00, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x03,                                                 // 224
+    0x00, 0x00, 0xE0, 0x01, 0x50, 0x02, 0x50, 0x02, 0x48, 0x02, 0x88, 0x01,                                                 // 225
+    0x00, 0x00, 0xE0, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01,                                                 // 226
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x60,                                                       // 227
+    0x00, 0x00, 0x00, 0x02, 0xC0, 0x03, 0x20, 0x02, 0xE0, 0x03, 0x00, 0x02,                                                 // 228
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0,                                                       // 229
+    0x00, 0x00, 0x60, 0x03, 0x80, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x60, 0x03,                                                 // 230
+    0x00, 0x00, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01,                                                 // 231
+    0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03,                                                 // 232
+    0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x98, 0x00, 0x40, 0x00, 0xE0, 0x03,                                                 // 233
+    0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                 // 234
+    0x00, 0x00, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03,                                                 // 235
+    0x00, 0x00, 0xE0, 0x03, 0x40, 0x00, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03,                                                 // 236
+    0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03,                                                 // 237
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                 // 238
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03,                                                 // 239
+    0x00, 0x00, 0xE0, 0x03, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                                       // 240
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0x40, 0x02,                                                 // 241
+    0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20,                                                       // 242
+    0x00, 0x00, 0x60, 0x00, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0xE0, 0x01,                                                 // 243
+    0x00, 0x00, 0xC0, 0x00, 0x20, 0x01, 0xE0, 0x03, 0x20, 0x01, 0xC0,                                                       // 244
+    0x00, 0x00, 0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                 // 245
+    0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02,                                                 // 246
+    0x00, 0x00, 0x60, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03,                                                 // 247
+    0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03,                                                 // 248
+    0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x06,                                     // 249
+    0x00, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01,                                                 // 250
+    0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, 0xE0, 0x03,                                                 // 251
+    0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01,                                                 // 252
+    0x00, 0x00, 0x40, 0x01, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01,                                                 // 253
+    0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, 0xC0, 0x01,                                                 // 254
+    0x00, 0x00, 0x40, 0x02, 0xA0, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0xE0, 0x03,                                                 // 255
+};

src/graphics/fonts/OLEDDisplayFontsUA.h

@@ -0,0 +1,11 @@
+#ifndef OLEDDISPLAYFONTSUA_h
+#define OLEDDISPLAYFONTSUA_h
+
+#ifdef ARDUINO
+#include <Arduino.h>
+#elif __MBED__
+#define PROGMEM
+#endif
+
+extern const uint8_t ArialMT_Plain_10_UA[] PROGMEM;
+#endif

src/graphics/images.h

@@ -14,7 +14,8 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3
 const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF};
 const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF};
 
-#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
 const uint8_t imgInfoL1[] PROGMEM = {0xff, 0x01, 0x01, 0x01, 0x1e, 0x7f, 0x1e, 0x01, 0x01, 0x01, 0x01, 0xff};

src/input/RotaryEncoderInterruptBase.h

@@ -1,7 +1,8 @@
 #pragma once
 
 #include "InputBroker.h"
-#include "SinglePortModule.h" // TODO: what header file to include?
+#include "concurrency/OSThread.h"
+#include "mesh/NodeDB.h"
 
 enum RotaryEncoderInterruptBaseStateType { ROTARY_EVENT_OCCURRED, ROTARY_EVENT_CLEARED };
 

src/input/TouchScreenBase.cpp

@@ -0,0 +1,137 @@
+#include "TouchScreenBase.h"
+#include "main.h"
+
+#ifndef TIME_LONG_PRESS
+#define TIME_LONG_PRESS 400
+#endif
+
+// move a minimum distance over the screen to detect a "swipe"
+#ifndef TOUCH_THRESHOLD_X
+#define TOUCH_THRESHOLD_X 30
+#endif
+
+#ifndef TOUCH_THRESHOLD_Y
+#define TOUCH_THRESHOLD_Y 20
+#endif
+
+TouchScreenBase::TouchScreenBase(const char *name, uint16_t width, uint16_t height)
+    : concurrency::OSThread(name), _display_width(width), _display_height(height), _first_x(0), _last_x(0), _first_y(0),
+      _last_y(0), _start(0), _tapped(false), _originName(name)
+{
+}
+
+void TouchScreenBase::init(bool hasTouch)
+{
+    if (hasTouch) {
+        LOG_INFO("TouchScreen initialized %d %d\n", TOUCH_THRESHOLD_X, TOUCH_THRESHOLD_Y);
+        this->setInterval(100);
+    } else {
+        disable();
+        this->setInterval(UINT_MAX);
+    }
+}
+
+int32_t TouchScreenBase::runOnce()
+{
+    TouchEvent e;
+    e.touchEvent = static_cast<char>(TOUCH_ACTION_NONE);
+
+    // process touch events
+    int16_t x, y;
+    bool touched = getTouch(x, y);
+    if (touched) {
+        hapticFeedback();
+        this->setInterval(20);
+        _last_x = x;
+        _last_y = y;
+    }
+    if (touched != _touchedOld) {
+        if (touched) {
+            _state = TOUCH_EVENT_OCCURRED;
+            _start = millis();
+            _first_x = x;
+            _first_y = y;
+        } else {
+            _state = TOUCH_EVENT_CLEARED;
+            time_t duration = millis() - _start;
+            x = _last_x;
+            y = _last_y;
+            this->setInterval(50);
+
+            // compute distance
+            int16_t dx = x - _first_x;
+            int16_t dy = y - _first_y;
+            uint16_t adx = abs(dx);
+            uint16_t ady = abs(dy);
+
+            // swipe horizontal
+            if (adx > ady && adx > TOUCH_THRESHOLD_X) {
+                if (0 > dx) { // swipe right to left
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_LEFT);
+                    LOG_DEBUG("action SWIPE: right to left\n");
+                } else { // swipe left to right
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_RIGHT);
+                    LOG_DEBUG("action SWIPE: left to right\n");
+                }
+            }
+            // swipe vertical
+            else if (ady > adx && ady > TOUCH_THRESHOLD_Y) {
+                if (0 > dy) { // swipe bottom to top
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_UP);
+                    LOG_DEBUG("action SWIPE: bottom to top\n");
+                } else { // swipe top to bottom
+                    e.touchEvent = static_cast<char>(TOUCH_ACTION_DOWN);
+                    LOG_DEBUG("action SWIPE: top to bottom\n");
+                }
+            }
+            // tap
+            else {
+                if (duration > 0 && duration < TIME_LONG_PRESS) {
+                    if (_tapped) {
+                        _tapped = false;
+                        e.touchEvent = static_cast<char>(TOUCH_ACTION_DOUBLE_TAP);
+                        LOG_DEBUG("action DOUBLE TAP(%d/%d)\n", x, y);
+                    } else {
+                        _tapped = true;
+                    }
+                } else {
+                    _tapped = false;
+                }
+            }
+        }
+    }
+    _touchedOld = touched;
+
+    // fire TAP event when no 2nd tap occured within time
+    if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) {
+        _tapped = false;
+        e.touchEvent = static_cast<char>(TOUCH_ACTION_TAP);
+        LOG_DEBUG("action TAP(%d/%d)\n", _last_x, _last_y);
+    }
+
+    // fire LONG_PRESS event without the need for release
+    if (touched && (time_t(millis()) - _start) > TIME_LONG_PRESS) {
+        // tricky: prevent reoccurring events and another touch event when releasing
+        _start = millis() + 30000;
+        e.touchEvent = static_cast<char>(TOUCH_ACTION_LONG_PRESS);
+        LOG_DEBUG("action LONG PRESS(%d/%d)\n", _last_x, _last_y);
+    }
+
+    if (e.touchEvent != TOUCH_ACTION_NONE) {
+        e.source = this->_originName;
+        e.x = _last_x;
+        e.y = _last_y;
+        onEvent(e);
+    }
+
+    return interval;
+}
+
+void TouchScreenBase::hapticFeedback()
+{
+#ifdef T_WATCH_S3
+    drv.setWaveform(0, 75);
+    drv.setWaveform(1, 0); // end waveform
+    drv.go();
+#endif
+}

src/input/TouchScreenBase.h

@@ -0,0 +1,55 @@
+#pragma once
+
+#include "InputBroker.h"
+#include "concurrency/OSThread.h"
+#include "mesh/NodeDB.h"
+
+typedef struct _TouchEvent {
+    const char *source;
+    char touchEvent;
+    uint16_t x;
+    uint16_t y;
+} TouchEvent;
+
+class TouchScreenBase : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  public:
+    explicit TouchScreenBase(const char *name, uint16_t width, uint16_t height);
+    void init(bool hasTouch);
+
+  protected:
+    enum TouchScreenBaseStateType { TOUCH_EVENT_OCCURRED, TOUCH_EVENT_CLEARED };
+
+    enum TouchScreenBaseEventType {
+        TOUCH_ACTION_NONE,
+        TOUCH_ACTION_UP,
+        TOUCH_ACTION_DOWN,
+        TOUCH_ACTION_LEFT,
+        TOUCH_ACTION_RIGHT,
+        TOUCH_ACTION_TAP,
+        TOUCH_ACTION_DOUBLE_TAP,
+        TOUCH_ACTION_LONG_PRESS
+    };
+
+    virtual int32_t runOnce() override;
+
+    virtual bool getTouch(int16_t &x, int16_t &y) = 0;
+    virtual void onEvent(const TouchEvent &event) = 0;
+
+    volatile TouchScreenBaseStateType _state = TOUCH_EVENT_CLEARED;
+    volatile TouchScreenBaseEventType _action = TOUCH_ACTION_NONE;
+    void hapticFeedback();
+
+  protected:
+    uint16_t _display_width;
+    uint16_t _display_height;
+
+  private:
+    bool _touchedOld = false;  // previous touch state
+    int16_t _first_x, _last_x; // horizontal swipe direction
+    int16_t _first_y, _last_y; // vertical swipe direction
+    time_t _start;             // for LONG_PRESS
+    bool _tapped;              // for DOUBLE_TAP
+
+    const char *_originName;
+};