Missed the version bump apparently

* Pico W: Initial WiFi support: connects, but freezes after a while

* Update arduino-pico core to fix hang with Wi-Fi

* Add `picow` to workflow since it's different from `pico` now

.gitattributes

@@ -0,0 +1,4 @@
+* text=auto eol=lf
+*.{cmd,[cC][mM][dD]} text eol=crlf
+*.{bat,[bB][aA][tT]} text eol=crlf
+*.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -32,16 +32,24 @@ body:
       options:
         - Not Applicable
         - T-Beam
+        - T-Beam S3
         - T-Beam 0.7
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
+        - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/ISSUE_TEMPLATE/New Board.yml

@@ -28,7 +28,7 @@ body:
       description: What LoRa IC does the board have?
     validations:
       required: true
-      
+
   - type: input
     id: link
     attributes:

.github/actions/setup-base/action.yml

@@ -1,5 +1,5 @@
-name: 'Setup Build Base Composite Action'
-description: 'Base build actions for Meshtastic Platform IO steps'
+name: "Setup Build Base Composite Action"
+description: "Base build actions for Meshtastic Platform IO steps"
 
 runs:
   using: "composite"
@@ -10,7 +10,7 @@ runs:
         submodules: "recursive"
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
-    
+
     - name: Install cppcheck
       shell: bash
       run: |
@@ -38,4 +38,4 @@ runs:
     - name: Upgrade platformio
       shell: bash
       run: |
-        pio upgrade
+        pio upgrade

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -7,7 +7,7 @@ on:
         required: true
         type: string
 
-jobs: 
+jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -31,7 +31,7 @@ jobs:
 
       - name: Remove debug flags for release
         if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: | 
+        run: |
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
@@ -40,13 +40,13 @@ jobs:
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
-      
+
       - name: Get release version string
         shell: bash
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,59 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_nrf52.yml

@@ -7,7 +7,7 @@ on:
         required: true
         type: string
 
-jobs: 
+jobs:
   build-nrf52:
     runs-on: ubuntu-latest
     steps:
@@ -30,4 +30,4 @@ jobs:
           path: |
             release/*.uf2
             release/*.elf
-            release/*.zip
+            release/*.zip

.github/workflows/build_raspbian.yml

@@ -0,0 +1,45 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_arm64
+            bin/config-dist.yaml

.github/workflows/build_rpi2040.yml

@@ -7,7 +7,7 @@ on:
         required: true
         type: string
 
-jobs: 
+jobs:
   build-rpi2040:
     runs-on: ubuntu-latest
     steps:
@@ -29,4 +29,4 @@ jobs:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
           path: |
             release/*.uf2
-            release/*.elf
+            release/*.elf

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -23,9 +26,9 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2-1-1.6
+          - board: tlora-v2-1-1_6
           - board: tbeam
-          - board: heltec-v2.1
+          - board: heltec-v2_1
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
@@ -33,7 +36,10 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
-          
+          - board: t-watch-s3
+          - board: t-deck
+          #- board: rak11310
+
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v3
@@ -41,6 +47,10 @@ jobs:
         id: base
         uses: ./.github/actions/setup-base
 
+      - name: Trunk Check
+        if: ${{ github.event_name != 'workflow_dispatch' }}
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
+
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
 
@@ -53,38 +63,55 @@ jobs:
           - board: tlora-v2
           - board: tlora-v1
           - board: tlora_v1_3
-          - board: tlora-v2-1-1.6
-          - board: tlora-v2-1-1.8
+          - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_8
           - board: tbeam
           - board: heltec-v1
-          - board: heltec-v2.0
-          - board: heltec-v2.1
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: tbeam0.7
+          - board: heltec-v2_0
+          - board: heltec-v2_1
+          - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+          - board: nano-g1-explorer
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-s3:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: heltec-v3
+          - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-paper
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
-    uses: ./.github/workflows/build_esp32.yml
+          - board: t-watch-s3
+          - board: t-deck
+          - board: picomputer-s3
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
   build-nrf52:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
@@ -96,10 +123,21 @@ jobs:
       matrix:
         include:
           - board: pico
+          - board: picow
+          - board: rak11310
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
 
+  build-raspbian:
+    strategy:
+      fail-fast: false
+      max-parallel: 1
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml
+
   build-native:
     runs-on: ubuntu-latest
     steps:
@@ -109,14 +147,14 @@ jobs:
         uses: ./.github/actions/setup-base
 
       # We now run integration test before other build steps (to quickly see runtime failures)
-      - name: Build for native
-        run: platformio run -e native
-      - name: Integration test
-        run: |
-          .pio/build/native/program &
-          sleep 20 # 5 seconds was not enough
-          echo "Simulator started, launching python test..."
-          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+      #- name: Build for native
+      #  run: platformio run -e native
+      #- name: Integration test
+      # run: |
+      #.pio/build/native/program
+      #& sleep 20 # 5 seconds was not enough
+      #echo "Simulator started, launching python test..."
+      #python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
 
       - name: Build Native
         run: bin/build-native.sh
@@ -132,27 +170,36 @@ jobs:
           path: |
             release/device-*.sh
             release/device-*.bat
-      
+
       - name: Docker login
-        if: ${{ github.event_name == 'workflow_dispatch' }}
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
-        with: 
+        with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
-        if: ${{ github.event_name == 'workflow_dispatch' }}
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
-      - name: Docker build and push
+      - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         uses: docker/build-push-action@v3
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/build-push-action@v3
         with:
           context: .
           file: ./Dockerfile
           push: true
           tags: meshtastic/device-simulator:latest
-      
+
   after-checks:
     runs-on: ubuntu-latest
     needs: [check]
@@ -165,7 +212,16 @@ jobs:
 
   gather-artifacts:
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
+    needs:
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-nrf52,
+        build-raspbian,
+        build-native,
+        build-rpi2040,
+        package-raspbian,
+      ]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -177,12 +233,15 @@ jobs:
         with:
           path: ./
 
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_arm64 ./firmware-raspbian-*/bin/config-dist.yaml
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -194,6 +253,8 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_arm64
+            ./config-dist.yaml
           retention-days: 90
 
       - uses: actions/download-artifact@v3
@@ -221,8 +282,9 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v1.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
@@ -254,6 +316,13 @@ jobs:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
 
+      - uses: actions/download-artifact@v3
+        with:
+          name: artifact-deb
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -280,7 +349,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
@@ -307,6 +376,16 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - name: Add raspbian .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py

.github/workflows/nightly.yml

@@ -0,0 +1,19 @@
+name: Nightly
+on:
+  schedule:
+    - cron: 0 8 * * 1-5
+  workflow_dispatch: {}
+
+jobs:
+  trunk_check:
+    name: Trunk Check Upload
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
+        with:
+          trunk-token: ${{ secrets.TRUNK_TOKEN }}

.github/workflows/package_raspbian.yml

@@ -0,0 +1,62 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          cp release/meshtasticd_linux_arm64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact-deb
+          path: |
+            ./*.deb

.github/workflows/sec_sast_flawfinder.yml

@@ -10,31 +10,31 @@ on:
 
 jobs:
   flawfinder:
-      runs-on: ubuntu-latest
-      name: Flawfinder
+    runs-on: ubuntu-latest
+    name: Flawfinder
 
-      steps:
-        # step 1
-        - name: clone application source code
-          uses: actions/checkout@v3
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v3
 
-        # step 2
-        - name: flawfinder_scan
-          uses: david-a-wheeler/flawfinder@2.0.19
-          with:
-            arguments: '--sarif ./'
-            output: 'flawfinder_report.sarif'
+      # step 2
+      - name: flawfinder_scan
+        uses: david-a-wheeler/flawfinder@2.0.19
+        with:
+          arguments: "--sarif ./"
+          output: "flawfinder_report.sarif"
 
-        # step 3
-        - name: save report as pipeline artifact
-          uses: actions/upload-artifact@v3
-          with:
-            name: flawfinder_report.sarif
-            path: flawfinder_report.sarif
+      # step 3
+      - name: save report as pipeline artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: flawfinder_report.sarif
+          path: flawfinder_report.sarif
 
-        # step 4
-        - name: publish code scanning alerts
-          uses: github/codeql-action/upload-sarif@v2
-          with:
-            sarif_file: flawfinder_report.sarif
-            category: flawfinder
+      # step 4
+      - name: publish code scanning alerts
+        uses: github/codeql-action/upload-sarif@v2
+        with:
+          sarif_file: flawfinder_report.sarif
+          category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -6,39 +6,37 @@ on:
     branches:
       - master
   schedule:
-    - cron:  '0 1 * * 6'
+    - cron: "0 1 * * 6"
 
 jobs:
-
   semgrep-full:
-      runs-on: ubuntu-latest
-      container:
-        image: returntocorp/semgrep
+    runs-on: ubuntu-latest
+    container:
+      image: returntocorp/semgrep
 
-      steps:
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v3
 
-        # step 1
-        - name: clone application source code
-          uses: actions/checkout@v3
+      # step 2
+      - name: full scan
+        run: |
+          semgrep \
+            --sarif --output report.sarif \
+            --metrics=off \
+            --config="p/default"
 
-        # step 2
-        - name: full scan
-          run: |
-            semgrep \
-              --sarif --output report.sarif \
-              --metrics=off \
-              --config="p/default"
+      # step 3
+      - name: save report as pipeline artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: report.sarif
+          path: report.sarif
 
-        # step 3
-        - name: save report as pipeline artifact
-          uses: actions/upload-artifact@v3
-          with:
-            name: report.sarif
-            path: report.sarif
-
-        # step 4
-        - name: publish code scanning alerts
-          uses: github/codeql-action/upload-sarif@v2
-          with:
-            sarif_file: report.sarif
-            category: semgrep
+      # step 4
+      - name: publish code scanning alerts
+        uses: github/codeql-action/upload-sarif@v2
+        with:
+          sarif_file: report.sarif
+          category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -1,17 +1,14 @@
 ---
 name: Semgrep Differential Scan
-on:
-  pull_request
+on: pull_request
 
 jobs:
-
   semgrep-diff:
     runs-on: ubuntu-latest
     container:
       image: returntocorp/semgrep
 
     steps:
-
       # step 1
       - name: clone application source code
         uses: actions/checkout@v3

.github/workflows/trunk-check.yml

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1

.gitignore

@@ -30,3 +30,4 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
+/compile_commands.json

.trunk/.gitignore

@@ -0,0 +1,8 @@
+*out
+*logs
+*actions
+*notifications
+*tools
+plugins
+user_trunk.yaml
+user.yaml

.trunk/configs/.flake8

@@ -0,0 +1,3 @@
+# Autoformatter friendly flake8 config (all formatting rules disabled)
+[flake8]
+extend-ignore = D1, D2, E1, E2, E3, E501, W1, W2, W3, W5

.trunk/configs/.hadolint.yaml

@@ -0,0 +1,4 @@
+# Following source doesn't work in most setups
+ignored:
+  - SC1090
+  - SC1091

.trunk/configs/.isort.cfg

@@ -0,0 +1,2 @@
+[settings]
+profile=black

.trunk/configs/.markdownlint.yaml

@@ -0,0 +1,10 @@
+# Autoformatter friendly markdownlint config (all formatting rules disabled)
+default: true
+blank_lines: false
+bullet: false
+html: false
+indentation: false
+line_length: false
+spaces: false
+url: false
+whitespace: false

.trunk/configs/.shellcheckrc

@@ -0,0 +1,10 @@
+enable=all
+source-path=SCRIPTDIR
+disable=SC2154
+disable=SC2248
+disable=SC2250
+
+# If you're having issues with shellcheck following source, disable the errors via:
+# disable=SC1090
+# disable=SC1091
+# 

.trunk/configs/.yamllint.yaml

@@ -0,0 +1,10 @@
+rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed: ["{|}"]
+  empty-values:
+    forbid-in-block-mappings: false
+    forbid-in-flow-mappings: true
+  key-duplicates: {}
+  octal-values:
+    forbid-implicit-octal: true

.trunk/configs/ruff.toml

@@ -0,0 +1,5 @@
+# Generic, formatter-friendly config.
+select = ["B", "D3", "D4", "E", "F"]
+
+# Never enforce `E501` (line length violations). This should be handled by formatters.
+ignore = ["E501"]

.trunk/configs/svgo.config.js

@@ -0,0 +1,14 @@
+module.exports = {
+  plugins: [
+    {
+      name: "preset-default",
+      params: {
+        overrides: {
+          removeViewBox: false, // https://github.com/svg/svgo/issues/1128
+          sortAttrs: true,
+          removeOffCanvasPaths: true,
+        },
+      },
+    },
+  ],
+};

.trunk/trunk.yaml

@@ -0,0 +1,44 @@
+version: 0.1
+cli:
+  version: 1.17.1
+plugins:
+  sources:
+    - id: trunk
+      ref: v1.2.6
+      uri: https://github.com/trunk-io/plugins
+lint:
+  enabled:
+    - bandit@1.7.5
+    - checkov@3.0.16
+    - terrascan@1.18.3
+    - trivy@0.46.1
+    - trufflehog@3.62.1
+    - taplo@0.8.1
+    - ruff@0.1.3
+    - yamllint@1.32.0
+    - isort@5.12.0
+    - markdownlint@0.37.0
+    - oxipng@9.0.0
+    - svgo@3.0.2
+    - actionlint@1.6.26
+    - flake8@6.1.0
+    - hadolint@2.12.0
+    - shfmt@3.6.0
+    - shellcheck@0.9.0
+    - black@23.9.1
+    - git-diff-check
+    - gitleaks@8.18.0
+    - clang-format@16.0.3
+    - prettier@3.0.3
+runtimes:
+  enabled:
+    - python@3.10.8
+    - go@1.21.0
+    - node@18.12.1
+actions:
+  disabled:
+    - trunk-announce
+  enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
+    - trunk-upgrade-available

.vscode/extensions.json

@@ -2,10 +2,8 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
+        "ms-vscode.cpptools",
         "platformio.platformio-ide",
-        "xaver.clang-format"
+        "trunk.io"
     ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
-}
+}

.vscode/settings.json

@@ -1,80 +1,5 @@
 {
-    "files.associations": {
-        "type_traits": "cpp",
-        "array": "cpp",
-        "*.tcc": "cpp",
-        "cctype": "cpp",
-        "clocale": "cpp",
-        "cmath": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "deque": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "vector": "cpp",
-        "exception": "cpp",
-        "algorithm": "cpp",
-        "functional": "cpp",
-        "system_error": "cpp",
-        "tuple": "cpp",
-        "fstream": "cpp",
-        "initializer_list": "cpp",
-        "iomanip": "cpp",
-        "iosfwd": "cpp",
-        "istream": "cpp",
-        "limits": "cpp",
-        "memory": "cpp",
-        "new": "cpp",
-        "ostream": "cpp",
-        "numeric": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "streambuf": "cpp",
-        "cinttypes": "cpp",
-        "utility": "cpp",
-        "typeinfo": "cpp",
-        "string": "cpp",
-        "*.xbm": "cpp",
-        "list": "cpp",
-        "atomic": "cpp",
-        "memory_resource": "cpp",
-        "optional": "cpp",
-        "string_view": "cpp",
-        "cassert": "cpp",
-        "iterator": "cpp",
-        "shared_mutex": "cpp",
-        "iostream": "cpp",
-        "esp_nimble_hci.h": "c",
-        "map": "cpp",
-        "random": "cpp",
-        "*.tpp": "cpp"
-    },
-    "cSpell.words": [
-        "Blox",
-        "EINK",
-        "HFSR",
-        "Meshtastic",
-        "NEMAGPS",
-        "NMEAGPS",
-        "RDEF",
-        "Ublox",
-        "bkpt",
-        "cfsr",
-        "descs",
-        "ocrypto",
-        "protobufs",
-        "wifi"
-    ],
-    "C_Cpp.dimInactiveRegions": true,
-    "cmake.configureOnOpen": true,
-    "protoc": {
-        "compile_on_save": false,
-    }
-}
+  "editor.formatOnSave": true,
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true
+}

.vscode/tasks.json

@@ -1,17 +1,15 @@
 {
-	"version": "2.0.0",
-	"tasks": [
-		{
-			"type": "PlatformIO",
-			"task": "Build",
-			"problemMatcher": [
-				"$platformio"
-			],
-			"group": {
-				"kind": "build",
-				"isDefault": true
-			},
-			"label": "PlatformIO: Build"
-		}
-	]
-}
+  "version": "2.0.0",
+  "tasks": [
+    {
+      "type": "PlatformIO",
+      "task": "Build",
+      "problemMatcher": ["$platformio"],
+      "group": {
+        "kind": "build",
+        "isDefault": true
+      },
+      "label": "PlatformIO: Build"
+    }
+  ]
+}

README.md

@@ -10,8 +10,8 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 

arch/esp32/esp32.ini

@@ -1,12 +1,15 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
+
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
+
 board_build.filesystem = littlefs
 
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@@ -25,17 +28,20 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
+  -DSERIAL_BUFFER_SIZE=4096
+  ;-DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
+  h2zero/NimBLE-Arduino@^1.4.1
+  jgromes/RadioLib@^6.2.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 
 lib_ignore = 
   segger_rtt
@@ -51,4 +57,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -0,0 +1,5 @@
+[esp32c3_base]
+extends = esp32_base
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -1,47 +1,16 @@
 [esp32s2_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
+extends = esp32_base
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
-upload_speed = 961200
+  ${esp32_base.build_src_filter} -<nimble/>
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
 
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
-  -DDEBUG_HEAP
   
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
 lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
 

arch/esp32/esp32s3.ini

@@ -1,47 +1,5 @@
 [esp32s3_base]
-extends = arduino_base
-platform = platformio/espressif32@^5.2.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
-upload_speed = 961200
+extends = esp32_base
+
 monitor_speed = 115200
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_flags =
-  ${arduino_base.build_flags} 
-  -Wall 
-  -Wextra 
-  -Isrc/platform/esp32 
-  -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial 
-  -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DDEBUG_HEAP
-  
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
-  caveman99/ESP32 Codec2@^1.0.1
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
 

arch/nrf52/nrf52.ini

@@ -1,18 +1,21 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.4.0
-
+platform = platformio/nordicnrf52@^10.1.0
 extends = arduino_base
+
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
   -Isrc/platform/nrf52
+
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+  jgromes/RadioLib@^6.2.0
+
 lib_ignore =
-  BluetoothOTA
-  
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832  
+  BluetoothOTA

arch/nrf52/nrf52832.ini

@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,14 +1,9 @@
 [nrf52840_base]
 extends = nrf52_base
+
 build_flags = ${nrf52_base.build_flags} 
+
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-

arch/portduino/portduino.ini

@@ -1,7 +1,8 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#05255283879a0c65a7d3eba6c468b9186438bb14
 framework = arduino
+
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -9,13 +10,24 @@ build_src_filter =
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
   -<platform/rp2040>
+  -<mesh/wifi/>
   -<mesh/http/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
+
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino
+  jgromes/RadioLib@^6.1.0
+
+build_flags =
+  ${arduino_base.build_flags}
+  -fPIC
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  

arch/rp2040/rp2040.ini

@@ -1,9 +1,9 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#20c7dbfcfe6677c5305fa28ecf5e3870321cb157
-platform_packages = 
-  earlephilhower/toolchain-rp2040-earlephilhower@^5.100300.221223
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#612de5399d68b359053f1307ed223d400aea975c
 extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#d2461a14ad5aa920e44508d236c2f459e3befbf8
+
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
@@ -12,10 +12,13 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/>
+
 lib_ignore =
   BluetoothOTA
+
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  jgromes/RadioLib@^6.2.0
+  rweather/Crypto

arch/stm32/stm32wl5e.ini

@@ -1,18 +1,29 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
+
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
-  -DHAL_SUBGHZ_MODULE_ENABLED
-#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
-#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
 lib_deps =
   ${env.lib_deps}
+  jgromes/RadioLib@^6.2.0
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-lib_ignore = 
-  mathertel/OneButton@^2.0.3
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  https://github.com/mathertel/OneButton#2.1.0

bin/build-esp32.sh

@@ -34,7 +34,7 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment tbeam -t buildfs
-cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -2,8 +2,8 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
 
 OUTDIR=release/
 
@@ -13,11 +13,15 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update
 
-pio run --environment native
-cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
+if command -v raspi-config &>/dev/null; then
+	pio run --environment raspbian
+	cp .pio/build/raspbian/program $OUTDIR/meshtasticd_linux_arm64
+else
+	pio run --environment native
+	cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
+fi
 
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
-

bin/check-all.sh

@@ -4,23 +4,23 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
+VERSION=$(bin/buildinfo.py long)
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 if [[ $# -gt 0 ]]; then
-    # can override which environment by passing arg
-    BOARDS="$@"
+	# can override which environment by passing arg
+	BOARDS="$@"
 else
-    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
 fi
 
 echo "BOARDS:${BOARDS}"
 
 CHECK=""
 for BOARD in $BOARDS; do
-     CHECK="${CHECK} -e ${BOARD}"
+	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -0,0 +1,40 @@
+# Define your devices here using Broadcom pin numbering
+# Uncomment the block that corresponds to your hardware
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+# Set gpio chip to use in /dev/. Defaults to 0.
+# Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+# Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+# Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0

bin/device-install.bat

@@ -30,7 +30,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
-	%PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+    
+    @REM Account for S3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    )
     for %%f in (littlefs-*.bin) do (
         %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )

bin/device-install.sh

@@ -49,7 +49,12 @@ if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
-    "$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	# Account for S3 board's different OTA partition
+	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
+		"$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	else
+	    "$PYTHON" -m esptool  write_flash 0x260000 bleota-s3.bin
+	fi
 	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
 
 else

bin/generate_ci_matrix.py

@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+
+"""Generate the CI matrix"""
+
+import configparser
+import json
+import os
+import sys
+
+rootdir = "variants/"
+
+options = sys.argv[1:]
+
+outlist = []
+
+if len(options) < 1:
+    print(json.dumps(outlist))
+    exit()
+
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if config[config[c].name]["extends"] == options[0] + "_base":
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+
+print(json.dumps(outlist))

bin/meshtasticd.service

@@ -0,0 +1,9 @@
+[unit]
+description=Meshtastic Native Daemon
+
+[Service]
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target

bin/native-install.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp release/meshtasticd_linux_arm64 /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service

bin/readprops.py

@@ -22,9 +22,9 @@ def readProps(prefsLoc):
         isDirty = subprocess.check_output(
             ['git', 'diff', 'HEAD']).decode("utf-8").strip()
         suffix = sha
-        if isDirty:
-            # short for 'dirty', we want to keep our verstrings source for protobuf reasons
-            suffix = sha + "-d"
+        # if isDirty:
+        #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+        #     suffix = sha + "-d"
         verObj['long'] = "{}.{}.{}.{}".format(
             version["major"], version["minor"], version["build"], suffix)
     except:

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto
+cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -8,7 +8,12 @@ echo "prebuilt binaries for your computer into nanopb-0.4.7"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
+../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
+
+# cd ../src/mesh/generated/meshtastic
+# sed -i 's/#include "meshtastic/#include "./g' -- *
+
+# sed -i 's/meshtastic_//g' -- *
 
 #echo "Regenerating protobuf documentation - if you see an error message"
 #echo "you can ignore it unless doing a new protobuf release to github."

boards/bpi_picow_esp32_s3.json

@@ -0,0 +1,36 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "bpi_picow_esp32_s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BPI-PicoW-S3 (8 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.banana-pi.org/BPI-PicoW-S3",
+  "vendor": "BPI"
+}

boards/eink0.1.json

@@ -7,12 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
-      [
-        "0x239A",
-        "0x4405"
-      ]
-    ],
+    "hwids": [["0x239A", "0x4405"]],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "eink0.1",
@@ -30,19 +25,13 @@
       "settings_addr": "0xFF000"
     }
   },
-  "connectivity": [
-    "bluetooth"
-  ],
+  "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": [
-      "jlink"
-    ],
+    "onboard_tools": ["jlink"],
     "svd_path": "nrf52840.svd"
   },
-  "frameworks": [
-    "arduino"
-  ],
+  "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",
   "upload": {
     "maximum_ram_size": 248832,
@@ -50,12 +39,8 @@
     "require_upload_port": true,
     "speed": 115200,
     "protocol": "jlink",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "stlink"
-    ]
+    "protocols": ["jlink", "nrfjprog", "stlink"]
   },
   "url": "FIXME",
   "vendor": "TTGO"
-}
+}

boards/generic_wl5e.json

@@ -9,9 +9,7 @@
     "product_line": "STM32WLE5xx"
   },
   "debug": {
-    "default_tools": [
-      "stlink"
-    ],
+    "default_tools": ["stlink"],
     "jlink_device": "STM32WLE5CC",
     "openocd_target": "stm32wlx",
     "svd_path": "STM32WLE5_CM4.svd"
@@ -22,9 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": [
-      "cmsis-dap"
-    ]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/lora_isp4520.json

@@ -19,16 +19,12 @@
       "sd_fwid": "0x00B7"
     }
   },
-  "connectivity": [
-    "bluetooth"
-  ],
+  "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
     "svd_path": "nrf52.svd"
   },
-  "frameworks": [
-    "arduino"
-  ],
+  "frameworks": ["arduino"],
   "name": "lora ISP4520",
   "upload": {
     "maximum_ram_size": 65536,
@@ -36,13 +32,8 @@
     "require_upload_port": true,
     "speed": 115200,
     "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink"
-    ]
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
   },
   "url": "",
   "vendor": "PsiSoft"
-}
+}

boards/my-esp32s3-diy-oled.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my-esp32s3-diy-oled"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/my_esp32s3_diy_eink.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "my_esp32s3_diy_eink"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Clone ESP32-S3-DevKitC-1 v1.1 (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/nordic_pca10059.json

@@ -1,72 +1,51 @@
 {
-    "build": {
-        "arduino": {
-            "ldscript": "nrf52840_s140_v6.ld"
-        },
-        "core": "nRF5",
-        "cpu": "cortex-m4",
-        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-        "f_cpu": "64000000L",
-        "hwids": [
-            [
-                "0x239A",
-                "0x8029"
-            ],
-            [
-                "0x239A",
-                "0x0029"
-            ],
-            [
-                "0x239A",
-                "0x002A"
-            ],
-            [
-                "0x239A",
-                "0x802A"
-            ]
-        ],
-        "usb_product": "PCA10059",
-        "mcu": "nrf52840",
-        "variant": "nRF52840 Dongle",
-        "bsp": {
-            "name": "adafruit"
-        },
-        "softdevice": {
-            "sd_flags": "-DS140",
-            "sd_name": "s140",
-            "sd_version": "6.1.1",
-            "sd_fwid": "0x00B6"
-        },
-        "bootloader": {
-            "settings_addr": "0xFF000"
-        }
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
     },
-    "connectivity": [
-        "bluetooth"
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
     ],
-    "debug": {
-        "jlink_device": "nRF52840_xxAA",
-        "svd_path": "nrf52840.svd"
+    "usb_product": "PCA10059",
+    "mcu": "nrf52840",
+    "variant": "nRF52840 Dongle",
+    "bsp": {
+      "name": "adafruit"
     },
-    "frameworks": [
-        "arduino"
-    ],
-    "name": "nRF52840 Dongle",
-    "upload": {
-        "maximum_ram_size": 248832,
-        "maximum_size": 815104,
-        "speed": 115200,
-        "protocol": "nrfutil",
-        "protocols": [
-            "jlink",
-            "nrfjprog",
-            "nrfutil",
-            "stlink"
-        ],
-        "use_1200bps_touch": true,
-        "require_upload_port": true,
-        "wait_for_upload_port": true
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
     },
-    "url": "https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle",
-    "vendor": "Nordic Semiconductor"
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "nRF52840 Dongle",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle",
+  "vendor": "Nordic Semiconductor"
 }

boards/nrf52840_dk.json

@@ -1,47 +1,46 @@
 {
-    "build": {
-      "arduino": {
-        "ldscript": "nrf52840_s140_v6.ld"
-      },
-      "core": "nRF5",
-      "cpu": "cortex-m4",
-      "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
-      "f_cpu": "64000000L",
-      "hwids": [["0x239A", "0x4404"]],
-      "usb_product": "nrf52840dk",
-      "mcu": "nrf52840",
-      "variant": "pca10056",
-      "variants_dir": "variants",
-      "bsp": {
-        "name": "adafruit"
-      },
-      "softdevice": {
-        "sd_flags": "-DS140",
-        "sd_name": "s140",
-        "sd_version": "6.1.1",
-        "sd_fwid": "0x00B6"
-      },
-      "bootloader": {
-        "settings_addr": "0xFF000"
-      }
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
     },
-    "connectivity": ["bluetooth"],
-    "debug": {
-      "jlink_device": "nRF52840_xxAA",
-      "onboard_tools": ["jlink"],
-      "svd_path": "nrf52840.svd"
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
     },
-    "frameworks": ["arduino"],
-    "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
-    "upload": {
-      "maximum_ram_size": 248832,
-      "maximum_size": 815104,
-      "require_upload_port": true,
-      "speed": 115200,
-      "protocol": "jlink",
-      "protocols": ["jlink", "nrfjprog", "stlink"]
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
     },
-    "url": "https://meshtastic.org/",
-    "vendor": "Nordic Semi"
-  }
-  
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/t-deck.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -8,10 +8,8 @@
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
-      [
-        "0x239A",
-        "0x4405"
-      ]
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x002A"]
     ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
@@ -30,35 +28,24 @@
       "settings_addr": "0xFF000"
     }
   },
-  "connectivity": [
-    "bluetooth"
-  ],
+  "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": [
-      "jlink"
-    ],
+    "onboard_tools": ["jlink"],
     "svd_path": "nrf52840.svd"
   },
-  "frameworks": [
-    "arduino"
-  ],
+  "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",
-    "upload": {
-      "maximum_ram_size": 248832,
-      "maximum_size": 815104,
-      "speed": 115200,
-      "protocol": "nrfutil",
-      "protocols": [
-          "jlink",
-          "nrfjprog",
-          "nrfutil",
-          "stlink"
-      ],
-      "use_1200bps_touch": true,
-      "require_upload_port": true,
-      "wait_for_upload_port": true
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
   },
   "url": "FIXME",
   "vendor": "TTGO"
-}
+}

boards/t-watch-s3.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-s3",
+  "vendor": "LilyGo"
+}

boards/tbeam-s3-core.json

@@ -15,24 +15,15 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [
-      [
-        "0X303A",
-        "0x1001"
-      ]
-    ],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tbeam-s3-core"
   },
-  "connectivity": [
-    "wifi"
-  ],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
-  "frameworks": [
-    "arduino"
-  ],
+  "frameworks": ["arduino"],
   "name": "LilyGo TBeam-S3-Core",
   "upload": {
     "flash_size": "8MB",
@@ -43,4 +34,4 @@
   },
   "url": "http://www.lilygo.cn/",
   "vendor": "LilyGo"
-}
+}

boards/tlora-t3s3-v1.json

@@ -9,30 +9,21 @@
       "-DARDUINO_USB_CDC_ON_BOOT=1",
       "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [
-      [
-        "0X303A",
-        "0x1001"
-      ]
-    ],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": [
-    "wifi"
-  ],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
-  "frameworks": [
-    "arduino",
-    "espidf"
-  ],
+  "frameworks": ["arduino", "espidf"],
   "name": "LilyGo TLora-T3S3-V1",
   "upload": {
     "flash_size": "4MB",
@@ -44,4 +35,4 @@
   },
   "url": "http://www.lilygo.cn/",
   "vendor": "LilyGo"
-}
+}

boards/wiscore_rak11200.json

@@ -1,6 +1,6 @@
 {
   "build": {
-    "arduino":{
+    "arduino": {
       "ldscript": "esp32_out.ld"
     },
     "core": "esp32",
@@ -11,26 +11,14 @@
     "mcu": "esp32",
     "variant": "WisCore_RAK11200_Board"
   },
-  "connectivity": [
-    "wifi",
-    "bluetooth",
-    "ethernet",
-    "can"
-  ],
-  "frameworks": [
-    "arduino",
-    "espidf"
-  ],
+  "connectivity": ["wifi", "bluetooth", "ethernet", "can"],
+  "frameworks": ["arduino", "espidf"],
   "name": "WisCore RAK11200 Board",
   "upload": {
     "flash_size": "4MB",
     "maximum_ram_size": 327680,
     "maximum_size": 4194304,
-    "protocols": [
-      "esptool",
-      "espota",
-      "ftdi"
-    ],
+    "protocols": ["esptool", "espota", "ftdi"],
     "require_upload_port": true,
     "speed": 460800
   },

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

boards/wiscore_rak4600.json

@@ -8,22 +8,10 @@
     "extra_flags": "-DNRF52832_XXAA -DNRF52",
     "f_cpu": "64000000L",
     "hwids": [
-      [
-        "0x239A",
-        "0x8029"
-      ],
-      [
-        "0x239A",
-        "0x0029"
-      ],
-      [
-        "0x239A",
-        "0x002A"
-      ],
-      [
-        "0x239A",
-        "0x802A"
-      ]
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
     ],
     "usb_product": "Feather nRF52832 Express",
     "mcu": "nrf52832",
@@ -41,17 +29,12 @@
       "variant": "nrf52_adafruit_feather"
     }
   },
-  "connectivity": [
-    "bluetooth"
-  ],
+  "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
     "svd_path": "nrf52.svd"
   },
-  "frameworks": [
-    "arduino",
-    "zephyr"
-  ],
+  "frameworks": ["arduino", "zephyr"],
   "name": "Adafruit Bluefruit nRF52832 Feather",
   "upload": {
     "maximum_ram_size": 65536,
@@ -59,13 +42,8 @@
     "require_upload_port": true,
     "speed": 115200,
     "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink"
-    ]
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
   },
   "url": "https://www.adafruit.com/product/3406",
   "vendor": "Adafruit"
-}
+}

boards/wiscore_rak4631.json

@@ -1,72 +1,51 @@
 {
-    "build": {
-        "arduino": {
-            "ldscript": "nrf52840_s140_v6.ld"
-        },
-        "core": "nRF5",
-        "cpu": "cortex-m4",
-        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-        "f_cpu": "64000000L",
-        "hwids": [
-            [
-                "0x239A",
-                "0x8029"
-            ],
-            [
-                "0x239A",
-                "0x0029"
-            ],
-            [
-                "0x239A",
-                "0x002A"
-            ],
-            [
-                "0x239A",
-                "0x802A"
-            ]
-        ],
-        "usb_product": "WisCore RAK4631 Board",
-        "mcu": "nrf52840",
-        "variant": "WisCore_RAK4631_Board",
-        "bsp": {
-            "name": "adafruit"
-        },
-        "softdevice": {
-            "sd_flags": "-DS140",
-            "sd_name": "s140",
-            "sd_version": "6.1.1",
-            "sd_fwid": "0x00B6"
-        },
-        "bootloader": {
-            "settings_addr": "0xFF000"
-        }
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
     },
-    "connectivity": [
-        "bluetooth"
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
     ],
-    "debug": {
-        "jlink_device": "nRF52840_xxAA",
-        "svd_path": "nrf52840.svd"
+    "usb_product": "WisCore RAK4631 Board",
+    "mcu": "nrf52840",
+    "variant": "WisCore_RAK4631_Board",
+    "bsp": {
+      "name": "adafruit"
     },
-    "frameworks": [
-        "arduino"
-    ],
-    "name": "WisCore RAK4631 Board",
-    "upload": {
-        "maximum_ram_size": 248832,
-        "maximum_size": 815104,
-        "speed": 115200,
-        "protocol": "nrfutil",
-        "protocols": [
-            "jlink",
-            "nrfjprog",
-            "nrfutil",
-            "stlink"
-        ],
-        "use_1200bps_touch": true,
-        "require_upload_port": true,
-        "wait_for_upload_port": true
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
     },
-    "url": "https://www.rakwireless.com",
-    "vendor": "RAKwireless"
-}
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisCore RAK4631 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

boards/xiao_ble_sense.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

docker-compose.yml

@@ -8,6 +8,6 @@ services:
       replicas: 4
     networks:
       - mesh
-    
+
 networks:
-  mesh:
+  mesh:

monitor/filter_c3_exception_decoder.py

@@ -0,0 +1,155 @@
+# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import os
+import re
+import subprocess
+import sys
+
+from platformio.project.exception import PlatformioException
+from platformio.public import (
+    DeviceMonitorFilterBase,
+    load_build_metadata,
+)
+
+# By design, __init__ is called inside miniterm and we can't pass context to it.
+# pylint: disable=attribute-defined-outside-init
+
+IS_WINDOWS = sys.platform.startswith("win")
+
+
+class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
+    NAME = "esp32_c3_exception_decoder"
+
+    PCADDR_PATTERN = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
+
+    def __call__(self):
+        self.buffer = ""
+        self.pcaddr_re = self.PCADDR_PATTERN
+
+        self.firmware_path = None
+        self.addr2line_path = None
+        self.enabled = self.setup_paths()
+
+        if self.config.get("env:" + self.environment, "build_type") != "debug":
+            print(
+                """
+Please build project in debug configuration to get more details about an exception.
+See https://docs.platformio.org/page/projectconf/build_configurations.html
+
+"""
+            )
+
+        return self
+
+    def setup_paths(self):
+        self.project_dir = os.path.abspath(self.project_dir)
+        try:
+            data = load_build_metadata(self.project_dir, self.environment)
+            self.firmware_path = data["prog_path"]
+            if not os.path.isfile(self.firmware_path):
+                sys.stderr.write(
+                    "%s: disabling, firmware at %s does not exist, rebuild the project?\n"
+                    % (self.__class__.__name__, self.firmware_path)
+                )
+                return False
+
+            if self.addr2line_path is None:
+                cc_path = data.get("cc_path", "")
+                if "-gcc" in cc_path:
+                    self.addr2line_path = cc_path.replace("-gcc", "-addr2line")
+                else:
+                    sys.stderr.write(
+                        "%s: disabling, failed to find addr2line.\n"
+                        % self.__class__.__name__
+                    )
+                    return False
+                
+            if not os.path.isfile(self.addr2line_path):
+                sys.stderr.write(
+                    "%s: disabling, addr2line at %s does not exist\n"
+                    % (self.__class__.__name__, self.addr2line_path)
+                )
+                return False
+                
+            return True
+        except PlatformioException as e:
+            sys.stderr.write(
+                "%s: disabling, exception while looking for addr2line: %s\n"
+                % (self.__class__.__name__, e)
+            )
+            return False
+
+    def rx(self, text):
+        if not self.enabled:
+            return text
+
+        last = 0
+        while True:
+            idx = text.find("\n", last)
+            if idx == -1:
+                if len(self.buffer) < 4096:
+                    self.buffer += text[last:]
+                break
+
+            line = text[last:idx]
+            if self.buffer:
+                line = self.buffer + line
+                self.buffer = ""
+            last = idx + 1
+
+            # Output each trace on a separate line below ours
+            # Logic identical to https://github.com/espressif/esp-idf/blob/master/tools/idf_monitor_base/logger.py#L131
+            for m in re.finditer(self.pcaddr_re, line):
+                if m is None:
+                    continue
+
+                trace = self.get_backtrace(m)
+                if len(trace) != "":
+                    text = text[: last] + trace + text[last :]
+                    last += len(trace)
+
+        return text
+
+    def get_backtrace(self, match):
+        trace = "\n"
+        enc = "mbcs" if IS_WINDOWS else "utf-8"
+        args = [self.addr2line_path, u"-fipC", u"-e", self.firmware_path]
+        try:
+            addr = match.group()
+            output = (
+                subprocess.check_output(args + [addr])
+                .decode(enc)
+                .strip()
+            )
+            output = output.replace(
+                "\n", "\n     "
+            )  # newlines happen with inlined methods
+            output = self.strip_project_dir(output)
+            # Output the trace in yellow color so that it is easier to spot
+            trace += "\033[33m=> %s: %s\033[0m\n" % (addr, output)
+        except subprocess.CalledProcessError as e:
+            sys.stderr.write(
+                "%s: failed to call %s: %s\n"
+                % (self.__class__.__name__, self.addr2line_path, e)
+            )
+        return trace
+
+    def strip_project_dir(self, trace):
+        while True:
+            idx = trace.find(self.project_dir)
+            if idx == -1:
+                break
+            trace = trace[:idx] + trace[idx + len(self.project_dir) + 1 :]
+        return trace

platformio.ini

@@ -7,12 +7,14 @@
 ;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
-;default_envs = heltec-v2.0
-;default_envs = heltec-v2.1
+;default_envs = heltec-v2_0
+;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1.6
+;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = nrf52840dk-geeksville
@@ -20,17 +22,19 @@
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-diy-v1_1
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+;default_envs = rak10701
+default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
-extra_scripts = bin/platformio-custom.py 
+extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
@@ -38,8 +42,8 @@ extra_scripts = bin/platformio-custom.py
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format 
-  -Isrc -Isrc/mesh -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
+  -Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
@@ -54,19 +58,23 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#53580644255b48ebb7a737343c6b4e71c7e11cf2 ; ESP8266_SSD1306 
-  mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
+  https://github.com/mathertel/OneButton#2.1.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
+  https://github.com/meshtastic/TinyGPSPlus.git#076e8d2c8fb702d9be5b08c55b93ff76f8af7e61
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
-  nanopb/Nanopb@^0.4.6
+  nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
-;  jgromes/RadioLib@^5.5.1
-  https://github.com/jgromes/RadioLib.git#395844922c5d88d5db0481a9c91479931172428d
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -81,31 +89,38 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
+  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
-  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#52b5282639d08a8cbd4b748363089eed6102dc76
+  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
-build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
+build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
-; Common libs for communicating over TCP/IP networks such as MQTT 
+; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
   arduino-libraries/NTPClient@^3.1.0
+  arcao/Syslog@^2.0.0
 
-; Common libs for environmental measurements in telemetry module 
+; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.4
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BME680 Library@^2.0.1
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
+  https://github.com/Tinyu-Zhao/INA3221@^0.0.1
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
+  adafruit/Adafruit MPU6050@^2.2.4
+  adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/BMA423_Library@^0.0.1

src/AccelerometerThread.h

@@ -0,0 +1,174 @@
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <Wire.h>
+#include <bma.h>
+
+BMA423 bmaSensor;
+bool BMA_IRQ = false;
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+namespace concurrency
+{
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    AccelerometerThread(ScanI2C::DeviceType type = ScanI2C::DeviceType::NONE) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+
+        acceleremoter_type = type;
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            Acfg cfg;
+            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
+            cfg.range = BMA4_ACCEL_RANGE_2G;
+            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
+            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
+            bmaSensor.setAccelConfig(cfg);
+            bmaSensor.enableAccel();
+
+            struct bma4_int_pin_config pin_config;
+            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
+            pin_config.lvl = BMA4_ACTIVE_HIGH;
+            pin_config.od = BMA4_PUSH_PULL;
+            pin_config.output_en = BMA4_OUTPUT_ENABLE;
+            pin_config.input_en = BMA4_INPUT_DISABLE;
+            // The correct trigger interrupt needs to be configured as needed
+            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+            struct bma423_axes_remap remap_data;
+            remap_data.x_axis = 0;
+            remap_data.x_axis_sign = 1;
+            remap_data.y_axis = 1;
+            remap_data.y_axis_sign = 0;
+            remap_data.z_axis = 2;
+            remap_data.z_axis_sign = 1;
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setRemapAxes(&remap_data);
+            // sensor.enableFeature(BMA423_STEP_CNTR, true);
+            bmaSensor.enableFeature(BMA423_TILT, true);
+            bmaSensor.enableFeature(BMA423_WAKEUP, true);
+            // sensor.resetStepCounter();
+
+            // Turn on feature interrupt
+            bmaSensor.enableStepCountInterrupt();
+            bmaSensor.enableTiltInterrupt();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupInterrupt();
+        }
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+                wakeScreen();
+                return 500;
+            }
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+};
+
+} // namespace concurrency

src/AmbientLightingThread.h

@@ -0,0 +1,75 @@
+#include "configuration.h"
+
+#ifdef HAS_NCP5623
+#include <graphics/RAKled.h>
+NCP5623 rgb;
+#endif
+
+namespace concurrency
+{
+class AmbientLightingThread : public concurrency::OSThread
+{
+  public:
+    AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    {
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
+        // // Default to a color based on our node number
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
+#ifdef HAS_NCP5623
+        _type = type;
+        if (_type == ScanI2C::DeviceType::NONE) {
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            disable();
+            return;
+        }
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            disable();
+            return;
+        }
+        LOG_DEBUG("AmbientLightingThread initializing\n");
+        if (_type == ScanI2C::NCP5623) {
+            rgb.begin();
+            setLighting();
+        }
+#endif
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+            setLighting();
+            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+        } else {
+            return disable();
+        }
+#else
+        return disable();
+#endif
+    }
+
+  private:
+    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+
+    void setLighting()
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+        rgb.setRed(moduleConfig.ambient_lighting.red);
+        rgb.setGreen(moduleConfig.ambient_lighting.green);
+        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+    }
+};
+
+} // namespace concurrency

src/BluetoothCommon.cpp

@@ -1,5 +1,5 @@
-#include "configuration.h"
 #include "BluetoothCommon.h"
+#include "configuration.h"
 
 // NRF52 wants these constants as byte arrays
 // Generated here https://yupana-engineering.com/online-uuid-to-c-array-converter - but in REVERSE BYTE ORDER

src/BluetoothCommon.h

@@ -17,4 +17,14 @@
 extern const uint8_t MESH_SERVICE_UUID_16[], TORADIO_UUID_16[16u], FROMRADIO_UUID_16[], FROMNUM_UUID_16[];
 
 /// Given a level between 0-100, update the BLE attribute
-void updateBatteryLevel(uint8_t level);
+void updateBatteryLevel(uint8_t level);
+
+class BluetoothApi
+{
+  public:
+    virtual void setup();
+    virtual void shutdown();
+    virtual void clearBonds();
+    virtual bool isConnected();
+    virtual int getRssi() = 0;
+};

src/ButtonThread.h

@@ -4,6 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "graphics/Screen.h"
+#include "main.h"
 #include "power.h"
 #include <OneButton.h>
 
@@ -35,6 +36,9 @@ class ButtonThread : public concurrency::OSThread
 #endif
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
+#endif
+#if defined(ARCH_RASPBERRY_PI)
+    OneButton userButton;
 #endif
     static bool shutdown_on_long_stop;
 
@@ -44,20 +48,31 @@ class ButtonThread : public concurrency::OSThread
     // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
     ButtonThread() : OSThread("Button")
     {
-#ifdef BUTTON_PIN
-        userButton = OneButton(BUTTON_PIN, true, true);
+#if defined(ARCH_RASPBERRY_PI) || defined(BUTTON_PIN)
+#if defined(ARCH_RASPBERRY_PI)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            userButton = OneButton(settingsMap[user], true, true);
+#elif defined(BUTTON_PIN)
+
+        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
+#endif
 #ifdef INPUT_PULLUP_SENSE
         // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
+        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
-        userButton.setClickTicks(300);
+        userButton.setClickMs(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
         userButton.attachLongPressStart(userButtonPressedLongStart);
         userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN, FALLING);
+#if defined(ARCH_RASPBERRY_PI)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+            wakeOnIrq(settingsMap[user], FALLING);
+#else
+        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
+#endif
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
@@ -86,9 +101,14 @@ class ButtonThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN)
         userButton.tick();
         canSleep &= userButton.isIdle();
+#elif defined(ARCH_RASPBERRY_PI)
+        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+            userButton.tick();
+            canSleep &= userButton.isIdle();
+        }
 #endif
 #ifdef BUTTON_PIN_ALT
         userButtonAlt.tick();
@@ -98,10 +118,10 @@ class ButtonThread : public concurrency::OSThread
         userButtonTouch.tick();
         canSleep &= userButtonTouch.isIdle();
 #endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
+        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
         // else LOG_DEBUG("sleep ok\n");
 
-        return 5;
+        return 50;
     }
 
   private:
@@ -115,7 +135,15 @@ class ButtonThread : public concurrency::OSThread
     {
         // LOG_DEBUG("press!\n");
 #ifdef BUTTON_PIN
-        if ((BUTTON_PIN != moduleConfig.canned_message.inputbroker_pin_press) ||
+        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+             moduleConfig.canned_message.inputbroker_pin_press) ||
+            !moduleConfig.canned_message.enabled) {
+            powerFSM.trigger(EVENT_PRESS);
+        }
+#endif
+#if defined(ARCH_RASPBERRY_PI)
+        if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
             !moduleConfig.canned_message.enabled) {
             powerFSM.trigger(EVENT_PRESS);
         }
@@ -124,17 +152,9 @@ class ButtonThread : public concurrency::OSThread
     static void userButtonPressedLong()
     {
         // LOG_DEBUG("Long press!\n");
-#ifdef ARCH_ESP32
-        screen->adjustBrightness();
-#endif
         // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
-#ifdef HAS_PMU
-            if (pmu_found == true) {
-                setLed(false);
-                power->shutdown();
-            }
-#elif defined(ARCH_NRF52)
+        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
             // Do actual shutdown when button released, otherwise the button release
             // may wake the board immediatedly.
             if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
@@ -144,10 +164,10 @@ class ButtonThread : public concurrency::OSThread
 #ifdef PIN_LED1
                 ledOff(PIN_LED1);
 #endif
-#ifdef PIN_LED2        
+#ifdef PIN_LED2
                 ledOff(PIN_LED2);
 #endif
-#ifdef PIN_LED3        
+#ifdef PIN_LED3
                 ledOff(PIN_LED3);
 #endif
                 shutdown_on_long_stop = true;
@@ -160,28 +180,27 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-    #if defined(USE_EINK) && defined(PIN_EINK_EN)
+#if defined(USE_EINK) && defined(PIN_EINK_EN)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-    #endif
-    #if defined(GPS_POWER_TOGGLE)
-        if(config.position.gps_enabled)
-        {
-        LOG_DEBUG("Flag set to false for gps power\n");
-        } 
-        else 
-        {
-        LOG_DEBUG("Flag set to true to restore power\n");
-        }
-    config.position.gps_enabled = !(config.position.gps_enabled);
-    doGPSpowersave(config.position.gps_enabled);
-    #endif
+#endif
+        screen->print("Sent ad-hoc ping\n");
+        service.refreshLocalMeshNode();
+        service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
     static void userButtonMultiPressed()
     {
-        screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
-        service.sendNetworkPing(NODENUM_BROADCAST, true);
+        if (!config.device.disable_triple_click && (gps != nullptr)) {
+            config.position.gps_enabled = !(config.position.gps_enabled);
+            if (config.position.gps_enabled) {
+                LOG_DEBUG("Flag set to true to restore power\n");
+                gps->enable();
+
+            } else {
+                LOG_DEBUG("Flag set to false for gps power\n");
+                gps->disable();
+            }
+        }
     }
 
     static void userButtonPressedLongStart()

src/DebugConfiguration.cpp

@@ -0,0 +1,172 @@
+/* based on https://github.com/arcao/Syslog
+
+MIT License
+
+Copyright (c) 2016 Martin Sloup
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.*/
+
+#include "configuration.h"
+
+#include "DebugConfiguration.h"
+
+#if HAS_WIFI || HAS_ETHERNET
+
+Syslog::Syslog(UDP &client)
+{
+    this->_client = &client;
+    this->_server = NULL;
+    this->_port = 0;
+    this->_deviceHostname = SYSLOG_NILVALUE;
+    this->_appName = SYSLOG_NILVALUE;
+    this->_priDefault = LOGLEVEL_KERN;
+}
+
+Syslog &Syslog::server(const char *server, uint16_t port)
+{
+    if (this->_ip.fromString(server)) {
+        this->_server = NULL;
+    } else {
+        this->_server = server;
+    }
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::server(IPAddress ip, uint16_t port)
+{
+    this->_ip = ip;
+    this->_server = NULL;
+    this->_port = port;
+    return *this;
+}
+
+Syslog &Syslog::deviceHostname(const char *deviceHostname)
+{
+    this->_deviceHostname = (deviceHostname == NULL) ? SYSLOG_NILVALUE : deviceHostname;
+    return *this;
+}
+
+Syslog &Syslog::appName(const char *appName)
+{
+    this->_appName = (appName == NULL) ? SYSLOG_NILVALUE : appName;
+    return *this;
+}
+
+Syslog &Syslog::defaultPriority(uint16_t pri)
+{
+    this->_priDefault = pri;
+    return *this;
+}
+
+Syslog &Syslog::logMask(uint8_t priMask)
+{
+    this->_priMask = priMask;
+    return *this;
+}
+
+void Syslog::enable()
+{
+    this->_enabled = true;
+}
+
+void Syslog::disable()
+{
+    this->_enabled = false;
+}
+
+bool Syslog::isEnabled()
+{
+    return this->_enabled;
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *fmt, va_list args)
+{
+    return this->vlogf(pri, this->_appName, fmt, args);
+}
+
+bool Syslog::vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args)
+{
+    char *message;
+    size_t initialLen;
+    size_t len;
+    bool result;
+
+    initialLen = strlen(fmt);
+
+    message = new char[initialLen + 1];
+
+    len = vsnprintf(message, initialLen + 1, fmt, args);
+    if (len > initialLen) {
+        delete[] message;
+        message = new char[len + 1];
+
+        vsnprintf(message, len + 1, fmt, args);
+    }
+
+    result = this->_sendLog(pri, appName, message);
+
+    delete[] message;
+    return result;
+}
+
+inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *message)
+{
+    int result;
+
+    if (!this->_enabled)
+        return false;
+
+    if ((this->_server == NULL && this->_ip == INADDR_NONE) || this->_port == 0)
+        return false;
+
+    // Check priority against priMask values.
+    if ((LOG_MASK(LOG_PRI(pri)) & this->_priMask) == 0)
+        return true;
+
+    // Set default facility if none specified.
+    if ((pri & LOG_FACMASK) == 0)
+        pri = LOG_MAKEPRI(LOG_FAC(this->_priDefault), pri);
+
+    if (this->_server != NULL) {
+        result = this->_client->beginPacket(this->_server, this->_port);
+    } else {
+        result = this->_client->beginPacket(this->_ip, this->_port);
+    }
+
+    if (result != 1)
+        return false;
+
+    this->_client->print('<');
+    this->_client->print(pri);
+    this->_client->print(F(">1 - "));
+    this->_client->print(this->_deviceHostname);
+    this->_client->print(' ');
+    this->_client->print(appName);
+    this->_client->print(F(" - - - \xEF\xBB\xBF"));
+    this->_client->print(F("["));
+    this->_client->print(int(millis() / 1000));
+    this->_client->print(F("]: "));
+    this->_client->print(message);
+    this->_client->endPacket();
+
+    return true;
+}
+
+#endif

src/DebugConfiguration.h

@@ -1,3 +1,6 @@
+#ifndef SYSLOG_H
+#define SYSLOG_H
+
 // DEBUG LED
 #ifndef LED_INVERTED
 #define LED_INVERTED 0 // define as 1 if LED is active low (on)
@@ -17,6 +20,7 @@
 #define MESHTASTIC_LOG_LEVEL_INFO "INFO "
 #define MESHTASTIC_LOG_LEVEL_WARN "WARN "
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
+#define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
 
 #include "SerialConsole.h"
@@ -24,25 +28,77 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
+#define DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_ERROR(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
+#define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
 #ifdef DEBUG_PORT
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
 #define LOG_ERROR(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_ERROR, __VA_ARGS__)
-#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_TRACE, __VA_ARGS__)
+#define LOG_CRIT(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_CRIT, __VA_ARGS__)
+#define LOG_TRACE(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_TRACE, __VA_ARGS__)
 #else
 #define LOG_DEBUG(...)
 #define LOG_INFO(...)
 #define LOG_WARN(...)
 #define LOG_ERROR(...)
+#define LOG_CRIT(...)
+#define LOG_TRACE(...)
 #endif
 #endif
 
+#define SYSLOG_NILVALUE "-"
+
+#define SYSLOG_CRIT 2  /* critical conditions */
+#define SYSLOG_ERR 3   /* error conditions */
+#define SYSLOG_WARN 4  /* warning conditions */
+#define SYSLOG_INFO 6  /* informational */
+#define SYSLOG_DEBUG 7 /* debug-level messages */
+// trace does not go out to syslog (yet?)
+
+#define LOG_PRIMASK 0x07 /* mask to extract priority part (internal) */
+                         /* extract priority */
+#define LOG_PRI(p) ((p)&LOG_PRIMASK)
+#define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri))
+
+/* facility codes */
+#define LOGLEVEL_KERN (0 << 3)      /* kernel messages */
+#define LOGLEVEL_USER (1 << 3)      /* random user-level messages */
+#define LOGLEVEL_MAIL (2 << 3)      /* mail system */
+#define LOGLEVEL_DAEMON (3 << 3)    /* system daemons */
+#define LOGLEVEL_AUTH (4 << 3)      /* security/authorization messages */
+#define LOGLEVEL_SYSLOG (5 << 3)    /* messages generated internally by syslogd */
+#define LOGLEVEL_LPR (6 << 3)       /* line printer subsystem */
+#define LOGLEVEL_NEWS (7 << 3)      /* network news subsystem */
+#define LOGLEVEL_UUCP (8 << 3)      /* UUCP subsystem */
+#define LOGLEVEL_CRON (9 << 3)      /* clock daemon */
+#define LOGLEVEL_AUTHPRIV (10 << 3) /* security/authorization messages (private) */
+#define LOGLEVEL_FTP (11 << 3)      /* ftp daemon */
+
+/* other codes through 15 reserved for system use */
+#define LOGLEVEL_LOCAL0 (16 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL1 (17 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL2 (18 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL3 (19 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL4 (20 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL5 (21 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL6 (22 << 3) /* reserved for local use */
+#define LOGLEVEL_LOCAL7 (23 << 3) /* reserved for local use */
+
+#define LOG_NFACILITIES 24 /* current number of facilities */
+#define LOG_FACMASK 0x03f8 /* mask to extract facility part */
+                           /* facility of pri */
+#define LOG_FAC(p) (((p)&LOG_FACMASK) >> 3)
+
+#define LOG_MASK(pri) (1 << (pri))             /* mask for one priority */
+#define LOG_UPTO(pri) ((1 << ((pri) + 1)) - 1) /* all priorities through pri */
+
 // -----------------------------------------------------------------------------
 // AXP192 (Rev1-specific options)
 // -----------------------------------------------------------------------------
@@ -52,3 +108,50 @@
 
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
+
+#if HAS_ETHERNET
+#include <RAK13800_W5100S.h>
+#endif // HAS_ETHERNET
+
+#if HAS_WIFI
+#include <WiFi.h>
+#endif // HAS_WIFI
+
+#if HAS_WIFI || HAS_ETHERNET
+
+class Syslog
+{
+  private:
+    UDP *_client;
+    IPAddress _ip;
+    const char *_server;
+    uint16_t _port;
+    const char *_deviceHostname;
+    const char *_appName;
+    uint16_t _priDefault;
+    uint8_t _priMask = 0xff;
+    bool _enabled = false;
+
+    bool _sendLog(uint16_t pri, const char *appName, const char *message);
+
+  public:
+    explicit Syslog(UDP &client);
+
+    Syslog &server(const char *server, uint16_t port);
+    Syslog &server(IPAddress ip, uint16_t port);
+    Syslog &deviceHostname(const char *deviceHostname);
+    Syslog &appName(const char *appName);
+    Syslog &defaultPriority(uint16_t pri = LOGLEVEL_KERN);
+    Syslog &logMask(uint8_t priMask);
+
+    void enable();
+    void disable();
+    bool isEnabled();
+
+    bool vlogf(uint16_t pri, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+    bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
+};
+
+#endif // HAS_ETHERNET || HAS_WIFI
+
+#endif // SYSLOG_H

src/DisplayFormatters.cpp

@@ -0,0 +1,34 @@
+#include "DisplayFormatters.h"
+
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        return useShortName ? "ShortS" : "ShortSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        return useShortName ? "ShortF" : "ShortFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        return useShortName ? "MedS" : "MediumSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        return useShortName ? "MedF" : "MediumFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        return useShortName ? "LongS" : "LongSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
+        return useShortName ? "LongF" : "LongFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        return useShortName ? "LongM" : "LongMod";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
+    default:
+        return useShortName ? "Custom" : "Invalid";
+        break;
+    }
+}

src/DisplayFormatters.h

@@ -0,0 +1,8 @@
+#pragma once
+#include "NodeDB.h"
+
+class DisplayFormatters
+{
+  public:
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+};

src/FSCommon.cpp

@@ -1,26 +1,43 @@
-#include "configuration.h"
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
+#include "configuration.h"
 
 #ifdef HAS_SDCARD
-#include <SPI.h>
 #include <SD.h>
+#include <SPI.h>
 
-
-#ifdef SDCARD_USE_SPI1  
+#ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
+#endif // HAS_SDCARD
 
-#endif  //HAS_SDCARD
-
-bool copyFile(const char* from, const char* to)
+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
+bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
     unsigned char cbuffer[16];
-   
+
     File f1 = FSCom.open(from, FILE_O_READ);
-    if (!f1){
+    if (!f1) {
         LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     }
@@ -30,92 +47,108 @@ bool copyFile(const char* from, const char* to)
         LOG_ERROR("Failed to open destination file %s\n", to);
         return false;
     }
-   
+
     while (f1.available() > 0) {
         byte i = f1.read(cbuffer, 16);
         f2.write(cbuffer, i);
     }
-   
+
+    f2.flush();
     f2.close();
     f1.close();
     return true;
 #endif
 }
 
-bool renameFile(const char* pathFrom, const char* pathTo)
+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
+bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
 #ifdef ARCH_ESP32
     // rename was fixed for ESP32 IDF LittleFS in April
     return FSCom.rename(pathFrom, pathTo);
 #else
-    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom) ) {
+    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom)) {
         return true;
-    } else{
+    } else {
         return false;
     }
 #endif
 #endif
 }
 
-void listDir(const char * dirname, uint8_t levels, boolean del = false)
+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     char buffer[255];
 #endif
     File root = FSCom.open(dirname, FILE_O_READ);
-    if(!root){
+    if (!root) {
         return;
     }
-    if(!root.isDirectory()){
+    if (!root.isDirectory()) {
         return;
     }
 
     File file = root.openNextFile();
-    while(file){
-        if(file.isDirectory() && !String(file.name()).endsWith(".")) {
-            if(levels){
+    while (file) {
+        if (file.isDirectory() && !String(file.name()).endsWith(".")) {
+            if (levels) {
 #ifdef ARCH_ESP32
-                listDir(file.path(), levels -1, del);
-                if(del) { 
+                listDir(file.path(), levels - 1, del);
+                if (del) {
                     LOG_DEBUG("Removing %s\n", file.path());
-                    strcpy(buffer, file.path());
+                    strncpy(buffer, file.path(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
                 } else {
                     file.close();
                 }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
-                listDir(file.name(), levels -1, del);
-                if(del) { 
+                listDir(file.name(), levels - 1, del);
+                if (del) {
                     LOG_DEBUG("Removing %s\n", file.name());
-                    strcpy(buffer, file.name());
+                    strncpy(buffer, file.name(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
                 } else {
                     file.close();
-                }                
+                }
 #else
-                listDir(file.name(), levels -1, del);
+                listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
             }
         } else {
 #ifdef ARCH_ESP32
-            if(del) {
+            if (del) {
                 LOG_DEBUG("Deleting %s\n", file.path());
-                strcpy(buffer, file.path());
+                strncpy(buffer, file.path(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-            LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
                 file.close();
             }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
-            if(del) {
+            if (del) {
                 LOG_DEBUG("Deleting %s\n", file.name());
-                strcpy(buffer, file.name());
+                strncpy(buffer, file.name(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
@@ -125,23 +158,23 @@ void listDir(const char * dirname, uint8_t levels, boolean del = false)
 #else
             LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
             file.close();
-#endif            
+#endif
         }
         file = root.openNextFile();
     }
-#ifdef ARCH_ESP32    
-    if(del) { 
+#ifdef ARCH_ESP32
+    if (del) {
         LOG_DEBUG("Removing %s\n", root.path());
-        strcpy(buffer, root.path());
+        strncpy(buffer, root.path(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
     } else {
         root.close();
     }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
-    if(del) { 
+    if (del) {
         LOG_DEBUG("Removing %s\n", root.name());
-        strcpy(buffer, root.name());
+        strncpy(buffer, root.name(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
     } else {
@@ -153,7 +186,14 @@ void listDir(const char * dirname, uint8_t levels, boolean del = false)
 #endif
 }
 
-void rmDir(const char * dirname)
+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
+void rmDir(const char *dirname)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -168,8 +208,7 @@ void rmDir(const char * dirname)
 void fsInit()
 {
 #ifdef FSCom
-    if (!FSBegin())
-    {
+    if (!FSBegin()) {
         LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
@@ -182,7 +221,9 @@ void fsInit()
 #endif
 }
 
-
+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
@@ -190,12 +231,12 @@ void setupSDCard()
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
         LOG_DEBUG("No SD_MMC card detected\n");
-        return ;
+        return;
     }
     uint8_t cardType = SD.cardType();
     if (cardType == CARD_NONE) {
         LOG_DEBUG("No SD_MMC card attached\n");
-        return ;
+        return;
     }
     LOG_DEBUG("SD_MMC Card Type: ");
     if (cardType == CARD_MMC) {
@@ -213,7 +254,4 @@ void setupSDCard()
     LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
     LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
-}
-
-
-
+}

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -40,8 +47,8 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
-bool copyFile(const char* from, const char* to);
-bool renameFile(const char* pathFrom, const char* pathTo);
-void listDir(const char * dirname, uint8_t levels, boolean del);
-void rmDir(const char * dirname);
+bool copyFile(const char *from, const char *to);
+bool renameFile(const char *pathFrom, const char *pathTo);
+void listDir(const char *dirname, uint8_t levels, bool del);
+void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -20,15 +20,15 @@ class GPSStatus : public Status
     bool hasLock = false;     // default to false, until we complete our first read
     bool isConnected = false; // Do we have a GPS we are talking to
 
-    bool isPowerSaving = false; //Are we in power saving state
+    bool isPowerSaving = false; // Are we in power saving state
 
-    Position p = Position_init_default;
+    meshtastic_Position p = meshtastic_Position_init_default;
 
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
     // preferred method
-    GPSStatus(bool hasLock, bool isConnected, bool isPowerSaving, const Position &pos) : Status()
+    GPSStatus(bool hasLock, bool isConnected, bool isPowerSaving, const meshtastic_Position &pos) : Status()
     {
         this->hasLock = hasLock;
         this->isConnected = isConnected;
@@ -47,7 +47,7 @@ class GPSStatus : public Status
 
     bool getIsConnected() const { return isConnected; }
 
-    bool getIsPowerSaving() const { return isPowerSaving;}
+    bool getIsPowerSaving() const { return isPowerSaving; }
 
     int32_t getLatitude() const
     {
@@ -55,7 +55,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +68,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,29 +81,38 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
         }
     }
 
-    uint32_t getDOP() const { return p.PDOP; }
+    uint32_t getDOP() const
+    {
+        return p.PDOP;
+    }
 
-    uint32_t getHeading() const { return p.ground_track; }
+    uint32_t getHeading() const
+    {
+        return p.ground_track;
+    }
 
-    uint32_t getNumSatellites() const { return p.sats_in_view; }
+    uint32_t getNumSatellites() const
+    {
+        return p.sats_in_view;
+    }
 
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
-        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected || newStatus->isPowerSaving !=isPowerSaving ||
-                newStatus->p.latitude_i != p.latitude_i || newStatus->p.longitude_i != p.longitude_i ||
-                newStatus->p.altitude != p.altitude || newStatus->p.altitude_hae != p.altitude_hae ||
-                newStatus->p.PDOP != p.PDOP || newStatus->p.ground_track != p.ground_track ||
-                newStatus->p.ground_speed != p.ground_speed ||
+        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
+                newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
+                newStatus->p.longitude_i != p.longitude_i || newStatus->p.altitude != p.altitude ||
+                newStatus->p.altitude_hae != p.altitude_hae || newStatus->p.PDOP != p.PDOP ||
+                newStatus->p.ground_track != p.ground_track || newStatus->p.ground_speed != p.ground_speed ||
                 newStatus->p.sats_in_view != p.sats_in_view);
     }
 
@@ -129,8 +138,9 @@ class GPSStatus : public Status
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
-            } else
+            } else {
                 LOG_DEBUG("No GPS lock\n");
+            }
             onNewStatus.notifyObservers(this);
         }
         return 0;
@@ -139,4 +149,4 @@ class GPSStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::GPSStatus *gpsStatus;
+extern meshtastic::GPSStatus *gpsStatus;

src/NodeStatus.h

@@ -1,83 +1,68 @@
 #pragma once
-#include <Arduino.h>
 #include "Status.h"
 #include "configuration.h"
+#include <Arduino.h>
 
-namespace meshtastic {
+namespace meshtastic
+{
 
-    /// Describes the state of the NodeDB system.
-    class NodeStatus : public Status
+/// Describes the state of the NodeDB system.
+class NodeStatus : public Status
+{
+
+  private:
+    CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
+        CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
+
+    uint8_t numOnline = 0;
+    uint8_t numTotal = 0;
+
+    uint8_t lastNumTotal = 0;
+
+  public:
+    bool forceUpdate = false;
+
+    NodeStatus() { statusType = STATUS_TYPE_NODE; }
+    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
     {
+        this->forceUpdate = forceUpdate;
+        this->numOnline = numOnline;
+        this->numTotal = numTotal;
+    }
+    NodeStatus(const NodeStatus &);
+    NodeStatus &operator=(const NodeStatus &);
 
-       private:
-        CallbackObserver<NodeStatus, const NodeStatus *> statusObserver = CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
+    void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-        uint8_t numOnline = 0;
-        uint8_t numTotal = 0;
+    uint8_t getNumOnline() const { return numOnline; }
 
-        uint8_t lastNumTotal = 0;
+    uint8_t getNumTotal() const { return numTotal; }
 
-       public:
-        bool forceUpdate = false;
+    uint8_t getLastNumTotal() const { return lastNumTotal; }
 
-        NodeStatus() {
-            statusType = STATUS_TYPE_NODE;
-        }
-        NodeStatus( uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false ) : Status()
+    bool matches(const NodeStatus *newStatus) const
+    {
+        return (newStatus->getNumOnline() != numOnline || newStatus->getNumTotal() != numTotal);
+    }
+    int updateStatus(const NodeStatus *newStatus)
+    {
+        // Only update the status if values have actually changed
+        lastNumTotal = numTotal;
+        bool isDirty;
         {
-            this->forceUpdate = forceUpdate;
-            this->numOnline = numOnline;
-            this->numTotal = numTotal;
+            isDirty = matches(newStatus);
+            initialized = true;
+            numOnline = newStatus->getNumOnline();
+            numTotal = newStatus->getNumTotal();
         }
-        NodeStatus(const NodeStatus &);
-        NodeStatus &operator=(const NodeStatus &);
-
-        void observe(Observable<const NodeStatus *> *source)
-        {
-            statusObserver.observe(source);
+        if (isDirty || newStatus->forceUpdate) {
+            LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);
+            onNewStatus.notifyObservers(this);
         }
+        return 0;
+    }
+};
 
-        uint8_t getNumOnline() const
-        { 
-            return numOnline; 
-        }
-
-        uint8_t getNumTotal() const
-        { 
-            return numTotal; 
-        }
-
-        uint8_t getLastNumTotal() const
-        {
-            return lastNumTotal;
-        }
-
-        bool matches(const NodeStatus *newStatus) const
-        {
-            return (
-                newStatus->getNumOnline() != numOnline ||
-                newStatus->getNumTotal() != numTotal
-            );
-        }
-        int updateStatus(const NodeStatus *newStatus) {
-            // Only update the status if values have actually changed
-            lastNumTotal = numTotal;
-            bool isDirty;
-            {
-                isDirty = matches(newStatus);
-                initialized = true; 
-                numOnline = newStatus->getNumOnline();
-                numTotal = newStatus->getNumTotal();
-            }
-            if(isDirty || newStatus->forceUpdate) {
-                LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);            
-                onNewStatus.notifyObservers(this);
-            }
-            return 0;
-        }
-
-    };
-
-}
+} // namespace meshtastic
 
 extern meshtastic::NodeStatus *nodeStatus;

src/OSTimer.cpp

@@ -1,11 +1,12 @@
-#include "configuration.h"
 #include "OSTimer.h"
+#include "configuration.h"
 
 /**
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
     (*tCallback)(tParam1, tParam2);
 }
 
+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
     if (!timer) {

src/Observer.cpp

@@ -1,3 +1,2 @@
-#include "configuration.h"
 #include "Observer.h"
-
+#include "configuration.h"

src/Observer.h

@@ -10,7 +10,7 @@ template <class T> class Observable;
  */
 template <class T> class Observer
 {
-  std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observed;
 
   public:
     virtual ~Observer();
@@ -87,7 +87,7 @@ template <class T> class Observable
 template <class T> Observer<T>::~Observer()
 {
     for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
-        ++iterator) {
+         ++iterator) {
         (*iterator)->removeObserver(this);
     }
     observed.clear();

src/Power.cpp

@@ -1,20 +1,74 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
+#include "meshUtils.h"
 #include "sleep.h"
-#include "utils.h"
-#include "buzz/buzz.h"
+
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
+
+#ifdef DEBUG_HEAP_MQTT
+#include "mqtt/MQTT.h"
+#include "target_specific.h"
+#include <WiFi.h>
+#endif
+
+#ifndef DELAY_FOREVER
+#define DELAY_FOREVER portMAX_DELAY
+#endif
+
+#if defined(BATTERY_PIN) && defined(ARCH_ESP32)
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
+static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_1;
+#else // ADC2
+static const adc2_channel_t adc_channel = ADC_CHANNEL;
+static const adc_unit_t unit = ADC_UNIT_2;
+RTC_NOINIT_ATTR uint64_t RTC_reg_b;
+
+#endif // BAT_MEASURE_ADC_UNIT
+
+esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+#ifndef ADC_ATTENUATION
+static const adc_atten_t atten = ADC_ATTEN_DB_11;
+#else
+static const adc_atten_t atten = ADC_ATTENUATION;
+#endif
+#endif // BATTERY_PIN && ARCH_ESP32
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+INA3221Sensor ina3221Sensor;
+#endif
 
 #ifdef HAS_PMU
-#include "XPowersLibInterface.hpp"
-#include "XPowersAXP2101.tpp"
 #include "XPowersAXP192.tpp"
+#include "XPowersAXP2101.tpp"
+#include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -98,6 +152,13 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
@@ -108,28 +169,63 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
 #ifdef BATTERY_PIN
         // Override variant or default ADC_MULTIPLIER if we have the override pref
-        float operativeAdcMultiplier = config.power.adc_multiplier_override > 0
-                                           ? config.power.adc_multiplier_override
-                                           : ADC_MULTIPLIER;
+        float operativeAdcMultiplier =
+            config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-//Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic environment.
+            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
+            // environment.
             uint32_t raw = 0;
-            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES; i++){
+#ifdef ARCH_ESP32
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL
+            if (heltec_version == 5) {
+                pinMode(ADC_CTRL, OUTPUT);
+                digitalWrite(ADC_CTRL, HIGH);
+                delay(10);
+            }
+#endif
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                raw += adc1_get_raw(adc_channel);
+            }
+#ifdef ADC_CTRL
+            if (heltec_version == 5) {
+                digitalWrite(ADC_CTRL, LOW);
+            }
+#endif
+#else  // ADC2
+            int32_t adc_buf = 0;
+            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                // ADC2 wifi bug workaround, see
+                // https://github.com/espressif/arduino-esp32/issues/102
+                WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
+                SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
+                adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+                raw += adc_buf;
+            }
+#endif // BAT_MEASURE_ADC_UNIT
+#else  // !ARCH_ESP32
+            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
-            raw = raw/BATTERY_SENSE_SAMPLES;
-
+#endif
+            raw = raw / BATTERY_SENSE_SAMPLES;
             float scaled;
+#ifdef ARCH_ESP32
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else
 #ifndef VBAT_RAW_TO_SCALED
             scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
 #else
             scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+#endif // VBAT RAW TO SCALED
+#endif // ARCH_ESP32
+       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
+
             last_read_value = scaled;
             return scaled;
         } else {
@@ -137,7 +233,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #else
         return 0;
-#endif
+#endif // BATTERY_PIN
     }
 
     /**
@@ -147,7 +243,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
-    virtual bool isVbusIn() override { return getBattVoltage() > chargingVolt; }
+    /// On some boards we don't have the power management chip (like AXPxxxx)
+    /// so we use EXT_PWR_DETECT GPIO pin to detect external power source
+    virtual bool isVbusIn() override
+    {
+#ifdef EXT_PWR_DETECT
+        // if external powered that pin will be pulled up
+        if (digitalRead(EXT_PWR_DETECT) == HIGH) {
+            return true;
+        }
+        // if it's not HIGH - check the battery
+#endif
+
+        return getBattVoltage() > chargingVolt;
+    }
 
     /// Assume charging if we have a battery and external power is connected.
     /// we can't be smart enough to say 'full'?
@@ -159,21 +268,55 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
 #ifndef BAT_FULLVOLT
 #define BAT_FULLVOLT 4200
-#endif 
+#endif
 #ifndef BAT_EMPTYVOLT
 #define BAT_EMPTYVOLT 3270
-#endif 
+#endif
 #ifndef BAT_CHARGINGVOLT
 #define BAT_CHARGINGVOLT 4210
-#endif 
+#endif
 #ifndef BAT_NOBATVOLT
 #define BAT_NOBATVOLT 2230
-#endif 
+#endif
 
     /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
     const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -183,37 +326,68 @@ Power::Power() : OSThread("Power")
     statusHandler = {};
     low_voltage_counter = 0;
 #ifdef DEBUG_HEAP
-    lastheap = ESP.getFreeHeap();
+    lastheap = memGet.getFreeHeap();
 #endif
 }
 
 bool Power::analogInit()
 {
+#ifdef EXT_PWR_DETECT
+    pinMode(EXT_PWR_DETECT, INPUT);
+#endif
+
 #ifdef BATTERY_PIN
     LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifdef ARCH_ESP32
-    // ESP32 needs special analog stuff
-    adcAttachPin(BATTERY_PIN);
+#ifndef BATTERY_SENSE_RESOLUTION_BITS
+#define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
+
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+
+#ifndef ADC_WIDTH // max resolution by default
+    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
+#else
+    static const adc_bits_width_t width = ADC_WIDTH;
+#endif
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+    adc1_config_width(width);
+    adc1_config_channel_atten(adc_channel, atten);
+#else // ADC2
+    adc2_config_channel_atten(adc_channel, atten);
+    // ADC2 wifi bug workaround
+    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
+    // calibrate ADC
+    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
+    // show ADC characterization base
+    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
+    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
+    } else {
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
+    }
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
+    pinMode(37, OUTPUT); // needed for P channel mosfet to work
+    digitalWrite(37, LOW);
+#endif
+#endif // ARCH_ESP32
+
 #ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-#endif
-
-#ifndef BATTERY_SENSE_RESOLUTION_BITS
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#endif
-
-    // adcStart(BATTERY_PIN);
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
                                                          // depending on needed resolution.
+
+#endif // ARCH_NRF52
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -221,6 +395,11 @@ bool Power::analogInit()
 #endif
 }
 
+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
     bool found = axpChipInit();
@@ -238,20 +417,27 @@ void Power::shutdown()
 {
     screen->setOn(false);
 #if defined(USE_EINK) && defined(PIN_EINK_EN)
-    digitalWrite(PIN_EINK_EN, LOW); //power off backlight first
+    digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
 #endif
 
-#ifdef HAS_PMU
     LOG_INFO("Shutting down\n");
-    if(PMU) {
+
+#ifdef HAS_PMU
+    if (pmu_found == true) {
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
         PMU->shutdown();
     }
-#elif defined(ARCH_NRF52)
-    playBeep();
+#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#ifdef PIN_LED1
     ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2
     ledOff(PIN_LED2);
-    doDeepSleep(DELAY_FOREVER);
+#endif
+#ifdef PIN_LED3
+    ledOff(PIN_LED3);
+#endif
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }
 
@@ -262,7 +448,7 @@ void Power::readPowerStatus()
 {
     if (batteryLevel) {
         bool hasBattery = batteryLevel->isBatteryConnect();
-        int batteryVoltageMv = 0;
+        uint32_t batteryVoltageMv = 0;
         int8_t batteryChargePercent = 0;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
@@ -279,51 +465,86 @@ void Power::readPowerStatus()
             }
         }
 
+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+            NRF_USB = OptFalse;
+        } else {
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+            NRF_USB = OptTrue;
+        }
+#endif
         // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
-        if (lastheap != ESP.getFreeHeap()) {
+        if (lastheap != memGet.getFreeHeap()) {
             LOG_DEBUG("Threads running:");
             int running = 0;
-            for(int i = 0; i < MAX_THREADS; i++){
+            for (int i = 0; i < MAX_THREADS; i++) {
                 auto thread = concurrency::mainController.get(i);
-                if((thread != nullptr) && (thread->enabled)) {
+                if ((thread != nullptr) && (thread->enabled)) {
                     LOG_DEBUG(" %s", thread->ThreadName.c_str());
                     running++;
                 }
             }
             LOG_DEBUG("\n");
-            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", ESP.getFreeHeap(), ESP.getHeapSize(), ESP.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
-            lastheap = ESP.getFreeHeap();
+            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+                      memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+            lastheap = memGet.getFreeHeap();
+        }
+#ifdef DEBUG_HEAP_MQTT
+        if (mqtt) {
+            // send MQTT-Packet with Heap-Size
+            uint8_t dmac[6];
+            getMacAddr(dmac); // Get our hardware ID
+            char mac[18];
+            sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
+
+            auto newHeap = memGet.getFreeHeap();
+            std::string heapTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+            std::string heapString = std::to_string(newHeap);
+            mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+            auto wifiRSSI = WiFi.RSSI();
+            std::string wifiTopic =
+                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+            std::string wifiString = std::to_string(wifiRSSI);
+            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
         }
 #endif
 
-// If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
-// Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef ARCH_NRF52
+#endif
+
+        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
+        // a row
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                LOG_DEBUG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
                     // We can't trigger deep sleep on NRF52, it's freezing the board
-                    //powerFSM.trigger(EVENT_LOW_BATTERY);
                     LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+#else
+                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                    powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
                 }
             } else {
                 low_voltage_counter = 0;
             }
         }
-#else
-        // If we have a battery at all and it is less than 10% full, force deep sleep
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB() && batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS)
-            powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
     } else {
         // No power sensing on this board - tell everyone else we have no idea what is happening
         const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
@@ -338,11 +559,11 @@ int32_t Power::runOnce()
 #ifdef HAS_PMU
     // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
     // the IRQ status by reading the registers over I2C
-    if(PMU) {
+    if (PMU) {
 
         PMU->getIrqStatus();
 
-        if(PMU->isVbusRemoveIrq()){
+        if (PMU->isVbusRemoveIrq()) {
             LOG_INFO("USB unplugged\n");
             powerFSM.trigger(EVENT_POWER_DISCONNECTED);
         }
@@ -368,10 +589,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -384,28 +607,28 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the axp192
- share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
- 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
- * 
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+ *
  */
 bool Power::axpChipInit()
 {
 
 #ifdef HAS_PMU
 
-        TwoWire * w = NULL;
+    TwoWire *w = NULL;
 
     // Use macro to distinguish which wire is used by PMU
 #ifdef PMU_USE_WIRE1
-        w = &Wire1;
+    w = &Wire1;
 #else
-        w = &Wire;
+    w = &Wire;
 #endif
 
     /**
-     * It is not necessary to specify the wire pin, 
+     * It is not necessary to specify the wire pin,
      * just input the wire, because the wire has been initialized in main.cpp
      */
     if (!PMU) {
@@ -431,11 +654,11 @@ bool Power::axpChipInit()
     }
 
     if (!PMU) {
-                /*
-        * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time. 
-        * In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once, 
-        * if there are multiple devices sharing the bus.
-        * * */
+        /*
+         * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time.
+         * In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once,
+         * if there are multiple devices sharing the bus.
+         * * */
 #ifndef PMU_USE_WIRE1
         w->begin(I2C_SDA, I2C_SCL);
 #endif
@@ -445,102 +668,136 @@ bool Power::axpChipInit()
     batteryLevel = PMU;
 
     if (PMU->getChipModel() == XPOWERS_AXP192) {
-        
+
         // lora radio power channel
         PMU->setPowerChannelVoltage(XPOWERS_LDO2, 3300);
         PMU->enablePowerOutput(XPOWERS_LDO2);
 
-
         // oled module power channel,
-        // disable it will cause abnormal communication between boot and AXP power supply, 
+        // disable it will cause abnormal communication between boot and AXP power supply,
         // do not turn it off
         PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
         // enable oled power
         PMU->enablePowerOutput(XPOWERS_DCDC1);
 
-
         // gnss module power channel -  now turned on in setGpsPower
         PMU->setPowerChannelVoltage(XPOWERS_LDO3, 3300);
         // PMU->enablePowerOutput(XPOWERS_LDO3);
 
-
-        //protected oled power source
+        // protected oled power source
         PMU->setProtectedChannel(XPOWERS_DCDC1);
-        //protected esp32 power source
+        // protected esp32 power source
         PMU->setProtectedChannel(XPOWERS_DCDC3);
 
-        //disable not use channel
+        // disable not use channel
         PMU->disablePowerOutput(XPOWERS_DCDC2);
 
-        //disable all axp chip interrupt
+        // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
 
         // Set constant current charging current
         PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
 
-        //Set up the charging voltage
+        // Set up the charging voltage
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
-        // t-beam s3 core 
+        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // Unuse power channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2);
+            PMU->disablePowerOutput(XPOWERS_DCDC3);
+            PMU->disablePowerOutput(XPOWERS_DCDC4);
+            PMU->disablePowerOutput(XPOWERS_DCDC5);
+            PMU->disablePowerOutput(XPOWERS_ALDO1);
+            PMU->disablePowerOutput(XPOWERS_ALDO4);
+            PMU->disablePowerOutput(XPOWERS_BLDO1);
+            PMU->disablePowerOutput(XPOWERS_BLDO2);
+            PMU->disablePowerOutput(XPOWERS_DLDO1);
+            PMU->disablePowerOutput(XPOWERS_DLDO2);
 
-        /**
-         * gnss module power channel 
-         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
-         */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO4);
+            // GNSS RTC PowerVDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
+            PMU->enablePowerOutput(XPOWERS_VBACKUP);
 
-        // lora radio power channel
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO3);
+            // ESP32 VDD 3300mV
+            //  ! No need to set, automatically open , Don't close it
+            //  PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+            //  PMU->setProtectedChannel(XPOWERS_DCDC1);
 
-        // m.2 interface 
-        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
-        PMU->enablePowerOutput(XPOWERS_DCDC3);
+            // LoRa VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        /**
-        * ALDO2 cannot be turned off. 
-        * It is a necessary condition for sensor communication. 
-        * It must be turned on to properly access the sensor and screen
-        * It is also responsible for the power supply of PCF8563
-        */
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO2);
+            // GNSS VDD 3300mV
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
+            // t-beam s3 core
+            /**
+             * gnss module power channel
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO4);
 
-        // 6-axis , magnetometer ,bme280 , oled screen power channel 
-        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_ALDO1);
+            // lora radio power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO3);
 
-        // sdcard power channle 
-        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-        PMU->enablePowerOutput(XPOWERS_BLDO1);
-        
-        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
-        // PMU->enablePowerOutput(XPOWERS_DCDC4);
+            // m.2 interface
+            PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+            PMU->enablePowerOutput(XPOWERS_DCDC3);
 
-        //not use channel
-        PMU->disablePowerOutput(XPOWERS_DCDC2); //not elicited
-        PMU->disablePowerOutput(XPOWERS_DCDC5); //not elicited
-        PMU->disablePowerOutput(XPOWERS_DLDO1); //Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_DLDO2); //Invalid power channel, it does not exist
-        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+            /**
+             * ALDO2 cannot be turned off.
+             * It is a necessary condition for sensor communication.
+             * It must be turned on to properly access the sensor and screen
+             * It is also responsible for the power supply of PCF8563
+             */
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO2);
 
-        //disable all axp chip interrupt
+            // 6-axis , magnetometer ,bme280 , oled screen power channel
+            PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_ALDO1);
+
+            // sdcard power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO1);
+
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+#endif
+
+            // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+            // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+            // not use channel
+            PMU->disablePowerOutput(XPOWERS_DCDC2); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DCDC5); // not elicited
+            PMU->disablePowerOutput(XPOWERS_DLDO1); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_DLDO2); // Invalid power channel, it does not exist
+            PMU->disablePowerOutput(XPOWERS_VBACKUP);
+        }
+
+        // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 
-        //Set the constant current charging current of AXP2101, temporarily use 500mA by default
+        // Set the constant current charging current of AXP2101, temporarily use 500mA by default
         PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
 
-        //Set up the charging voltage
+        // Set up the charging voltage
         PMU->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
     }
-    
 
     PMU->clearIrqStatus();
 
-    // TBeam1.1 /T-Beam S3-Core has no external TS detection, 
+    // TBeam1.1 /T-Beam S3-Core has no external TS detection,
     // it needs to be disabled, otherwise it will cause abnormal charging
     PMU->disableTSPinMeasure();
 
@@ -550,40 +807,52 @@ bool Power::axpChipInit()
 
     LOG_DEBUG("=======================================================================\n");
     if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
-        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
+        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
-        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
+        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
-        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC3)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
+        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
-        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC4)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
+        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
-        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_LDO2)   ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_LDO2));
+        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_LDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
-        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_LDO3)   ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_LDO3));
+        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_LDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
-        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
+        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
-        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
+        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
-        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO3)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
+        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
-        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO4)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
+        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
-        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_BLDO1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
+        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
-        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_BLDO2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
+        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
+                  PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
     LOG_DEBUG("=======================================================================\n");
 
@@ -597,30 +866,29 @@ bool Power::axpChipInit()
     PMU->setSysPowerDownVoltage(2600);
 #endif
 
-
 #ifdef PMU_IRQ
-        uint64_t pmuIrqMask = 0;
+    uint64_t pmuIrqMask = 0;
 
-        if (PMU->getChipModel() == XPOWERS_AXP192) {
-            pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
-        } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
-            pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
-        }
+    if (PMU->getChipModel() == XPOWERS_AXP192) {
+        pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
+    } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
+        pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
+    }
 
-        pinMode(PMU_IRQ, INPUT);
-        attachInterrupt(
-            PMU_IRQ, [] { pmu_irq = true; }, FALLING);
+    pinMode(PMU_IRQ, INPUT);
+    attachInterrupt(
+        PMU_IRQ, [] { pmu_irq = true; }, FALLING);
 
-        // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
-        // no battery also it could cause inadvertent waking from light sleep just because the battery filled
-        // we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
-        // we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
-        PMU->enableIRQ(pmuIrqMask);
+    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
+    // no battery also it could cause inadvertent waking from light sleep just because the battery filled
+    // we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
+    // we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
+    PMU->enableIRQ(pmuIrqMask);
 
-        PMU->clearIrqStatus();
+    PMU->clearIrqStatus();
 #endif /*PMU_IRQ*/
 
-            readPowerStatus();
+    readPowerStatus();
 
     pmu_found = true;
 

src/PowerFSM.cpp

@@ -1,5 +1,13 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
-#include "GPS.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -11,12 +19,12 @@
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
-    // Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
-    #if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
-        return true;
-    #endif
+// Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
+#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
+    return true;
+#endif
 
-    bool isRouter = (config.device.role == Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
 
     // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
     // We assume routers might be powered all the time, but from a low current (solar) source
@@ -26,22 +34,25 @@ static bool isPowered()
         1) If we're powered up and there's no battery, we must be getting power externally. (because we'd be dead otherwise)
 
         2) If we detect USB power from the power management chip, we must be getting power externally.
+
+        3) On some boards we don't have the power management chip (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect
+       external power source (see `isVbusIn()` in `Power.cpp`)
     */
     return !isPowerSavingMode && powerStatus && (!powerStatus->getHasBattery() || powerStatus->getHasUSB());
 }
 
 static void sdsEnter()
 {
-    LOG_INFO("Enter state: SDS\n");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
+    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_INFO("Enter state: SHUTDOWN\n");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -66,11 +77,11 @@ static void lsIdle()
 
     // Do we have more sleeping to do?
     if (secsSlept < config.power.ls_secs) {
-        // Briefly come out of sleep long enough to blink the led once every few seconds
-        uint32_t sleepTime = 30;
-
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
+            // Briefly come out of sleep long enough to blink the led once every few seconds
+            uint32_t sleepTime = 30;
+
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
 
@@ -78,8 +89,8 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                setLed(true);                 // briefly turn on led
-                wakeCause2 = doLightSleep(1); // leave led on for 1ms
+                setLed(true);                   // briefly turn on led
+                wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
                 // LOG_INFO("sleeping, flash led!\n");
@@ -96,12 +107,11 @@ static void lsIdle()
                 LOG_INFO("wakeCause2 %d\n", wakeCause2);
 
 #ifdef BUTTON_PIN
-                bool pressed = !digitalRead(BUTTON_PIN);
+                bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #else
                 bool pressed = false;
 #endif
-                if (pressed) // If we woke because of press, instead generate a PRESS event.
-                {
+                if (pressed) { // If we woke because of press, instead generate a PRESS event.
                     powerFSM.trigger(EVENT_PRESS);
                 } else {
                     // Otherwise let the NB state handle the IRQ (and that state will handle stuff like IRQs etc)
@@ -126,16 +136,16 @@ static void lsIdle()
 static void lsExit()
 {
     LOG_INFO("Exit state: LS\n");
-    // setGPSPower(true); // restore GPS power
-    if (gps)
-        gps->forceWake(true);
 }
 
 static void nbEnter()
 {
-    LOG_INFO("Enter state: NB\n");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
+#endif
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -148,7 +158,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_INFO("Enter state: SERIAL\n");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -156,12 +166,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
 {
-    LOG_INFO("Enter state: POWER\n");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -169,7 +181,11 @@ static void powerEnter()
     } else {
         screen->setOn(true);
         setBluetoothEnable(true);
-        screen->print("Powered...\n");
+        // within enter() the function getState() returns the state we came from
+        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+            strcmp(powerFSM.getState()->name, "DARK") != 0) {
+            screen->print("Powered...\n");
+        }
     }
 }
 
@@ -186,24 +202,15 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    screen->print("Unpowered...\n");
+    if (!isPowered())
+        screen->print("Unpowered...\n");
 }
 
 static void onEnter()
 {
-    LOG_INFO("Enter state: ON\n");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
-
-    static uint32_t lastPingMs;
-
-    uint32_t now = millis();
-
-    if ((now - lastPingMs) > 30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
-        if (displayedNodeNum)
-            service.sendNetworkPing(displayedNodeNum, true); // Refresh the currently displayed node
-        lastPingMs = now;
-    }
 }
 
 static void onIdle()
@@ -221,7 +228,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_INFO("Enter state: BOOT\n");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -237,7 +244,9 @@ Fsm powerFSM(&stateBOOT);
 
 void PowerFSM_setup()
 {
-    bool isRouter = (config.device.role == Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
@@ -245,20 +254,26 @@ void PowerFSM_setup()
 
     // wake timer expired or a packet arrived
     // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
     powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
-    powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Received packet, exiting light sleep");
+    powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_PACKET_FOR_PHONE, NULL,
+                            "Received packet, exiting light sleep");
     powerFSM.add_transition(&stateNB, &stateNB, EVENT_PACKET_FOR_PHONE, NULL, "Received packet, resetting win wake");
 
     // Handle press events - note: we ignore button presses when in API mode
     powerFSM.add_transition(&stateLS, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_PRESS, NULL, "Press");
-    powerFSM.add_transition(&stateDARK, &stateON, EVENT_PRESS, NULL, "Press");
+    powerFSM.add_transition(&stateDARK, isPowered() ? &statePOWER : &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
     powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
-    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress, "Press"); // Allow button to work while in serial API
+    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
+                            "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
     powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
@@ -280,7 +295,8 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateLS, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_INPUT, NULL, "Input Device");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
+    powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device");       // restarts the sleep timer
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
 
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
     powerFSM.add_transition(&stateON, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
@@ -296,10 +312,10 @@ void PowerFSM_setup()
         powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
-        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_TEXT_MSG, NULL, "Received text"); // restarts the sleep timer
+        powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateDARK, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
+        powerFSM.add_transition(&stateON, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text"); // restarts the sleep timer
     }
 
     // If we are not in statePOWER but get a serial connection, suppress sleep (and keep the screen on) while connected
@@ -324,22 +340,30 @@ void PowerFSM_setup()
 
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
-    powerFSM.add_timed_transition(&stateON, &stateDARK, getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL, "Screen-on timeout");
+    powerFSM.add_timed_transition(&stateON, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
+    powerFSM.add_timed_transition(&statePOWER, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 
+// We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
-    State *lowPowerState = &stateLS;
-    // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
-
     // See: https://github.com/meshtastic/firmware/issues/1071
-    if (isRouter || config.power.is_power_saving) {
-        powerFSM.add_timed_transition(&stateNB, &stateLS, getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout");
-        powerFSM.add_timed_transition(&stateDARK, &stateLS, getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL, "Bluetooth timeout");
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // modules
+    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
+        powerFSM.add_timed_transition(&stateNB, &stateLS,
+                                      getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
+                                      "Min wake timeout");
+        powerFSM.add_timed_transition(&stateDARK, &stateLS,
+                                      getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
+                                      NULL, "Bluetooth timeout");
     }
-
-    if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL, "mesh timeout");
 #endif
 
-
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
-}
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
+}

src/PowerFSM.h

@@ -8,7 +8,7 @@
 #define EVENT_WAKE_TIMER 2
 // #define EVENT_RECEIVED_PACKET 3
 #define EVENT_PACKET_FOR_PHONE 4
-#define EVENT_RECEIVED_TEXT_MSG 5
+#define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
 #define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen
@@ -19,10 +19,10 @@
 #define EVENT_POWER_CONNECTED 13
 #define EVENT_POWER_DISCONNECTED 14
 #define EVENT_FIRMWARE_UPDATE 15 // We just received a new firmware update packet from the phone
-#define EVENT_SHUTDOWN 16 //force a full shutdown now (not just sleep)
-#define EVENT_INPUT 17 // input broker wants something, we need to wake up and enable screen
+#define EVENT_SHUTDOWN 16        // force a full shutdown now (not just sleep)
+#define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
 extern Fsm powerFSM;
-extern State statePOWER, stateSERIAL;
+extern State stateON, statePOWER, stateSERIAL, stateDARK;
 
 void PowerFSM_setup();

src/PowerFSMThread.h

@@ -21,14 +21,15 @@ class PowerFSMThread : public OSThread
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
         /// cpu for serial rx - FIXME)
-        auto state = powerFSM.getState();
+        const auto state = powerFSM.getState();
         canSleep = (state != &statePOWER) && (state != &stateSERIAL);
 
         if (powerStatus->getHasUSB()) {
             timeLastPowered = millis();
-        } else if (config.power.on_battery_shutdown_after_secs > 0 && 
-            config.power.on_battery_shutdown_after_secs != UINT32_MAX && 
-            millis() > (timeLastPowered + getConfiguredOrDefaultMs(config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
+        } else if (config.power.on_battery_shutdown_after_secs > 0 && config.power.on_battery_shutdown_after_secs != UINT32_MAX &&
+                   millis() > (timeLastPowered +
+                               getConfiguredOrDefaultMs(
+                                   config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 

src/RF95Configuration.h

@@ -2,6 +2,6 @@
 #ifdef USE_RF95
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
-#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95
+#define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
 #define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
 #endif