Update protobuf ref

* 2.0

* Catch the right version of the common files

.github/workflows/main_matrix.yml

@@ -33,6 +33,7 @@ jobs:
           - board: heltec-v2.1
           - board: tbeam0.7
           - board: meshtastic-diy-v1
+          - board: meshtastic-dr-dev
           - board: rak4631
           - board: rak4631_eink
           - board: t-echo
@@ -42,7 +43,7 @@ jobs:
           - board: m5stack-coreink
           - board: tbeam-s3-core
         # - board: pico
-          
+
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
@@ -96,6 +97,7 @@ jobs:
           - board: heltec-v2.1
           - board: tbeam0.7
           - board: meshtastic-diy-v1
+          - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
@@ -131,11 +133,11 @@ jobs:
       - name: Upgrade platformio
         run: |
           pio upgrade
-          
+
       - name: Pull web ui
         uses: dsaltares/fetch-gh-release-asset@master
         with:
-          repo: "meshtastic/meshtastic-web"
+          repo: "meshtastic/web"
           file: "build.tar"
           target: "build.tar"
           token: ${{ secrets.GITHUB_TOKEN }}
@@ -147,7 +149,7 @@ jobs:
 
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ matrix.board }}
-         
+
       - name: Pull OTA Firmware
         uses: dsaltares/fetch-gh-release-asset@master
         with:
@@ -155,7 +157,7 @@ jobs:
           file: "firmware.bin"
           target: "release/bleota.bin"
           token: ${{ secrets.GITHUB_TOKEN }}
-          
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
@@ -369,7 +371,7 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-1*/littlefs*.bin ./*tbeam-1*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -392,7 +394,7 @@ jobs:
       # For diagnostics
       - name: Show artifacts
         run: ls -lR
-        
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -427,7 +429,7 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v3
-          
+
       - name: Setup Python
         uses: actions/setup-python@v4
         with:
@@ -441,7 +443,7 @@ jobs:
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
-      
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -454,7 +456,7 @@ jobs:
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
           path: ./elfs
-      
+
       - name: Zip Elfs
         run: zip -j -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
 
@@ -498,10 +500,9 @@ jobs:
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
-          
+
       - name: Create version.properties pull request
         uses: peter-evans/create-pull-request@v3
         with:
           add-paths: |
             version.properties
-

.gitmodules

@@ -1,3 +1,3 @@
 [submodule "protobufs"]
 	path = protobufs
-	url = https://github.com/meshtastic/Meshtastic-protobufs.git
+	url = https://github.com/meshtastic/protobufs.git

README.md

@@ -1,8 +1,8 @@
 # Meshtastic Firmware
 
-![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/meshtastic-device/total)
-[![CI](https://img.shields.io/github/workflow/status/meshtastic/Meshtastic-device/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/repo/actions/workflows/main_matrix.yml)
-[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/Meshtastic-device)](https://cla-assistant.io/meshtastic/Meshtastic-device)
+![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
+[![CI](https://img.shields.io/github/workflow/status/meshtastic/firmware/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/main_matrix.yml)
+[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/firmware)](https://cla-assistant.io/meshtastic/firmware)
 [![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
 [![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
@@ -10,10 +10,9 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-
 **[Building Instructions](https://meshtastic.org/docs/developers/Firmware/build)**
 **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 
-![Alt](https://repobeats.axiom.co/api/embed/99a2cf5622bb4807f9e8c3b86589f1133cce58a2.svg 'Repobeats analytics image')
+![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")

bin/promote-release.sh

@@ -9,9 +9,6 @@ VERSION=`bin/buildinfo.py long`
 # Must have a V prefix to trigger github
 git tag "v${VERSION}"
 
-# Commented out per https://github.com/meshtastic/Meshtastic-device/issues/947
-#git push root "v${VERSION}" # push the tag
-
 git push origin "v${VERSION}" # push the tag
 
 echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/regen-protos.sh

@@ -3,7 +3,7 @@
 set -e
 
 echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.6 to be located in the"
-echo "meshtastic-device root directory if the following step fails, you should download the correct"
+echo "firmware root directory if the following step fails, you should download the correct"
 echo "prebuilt binaries for your computer into nanopb-0.4.6"
 
 # the nanopb tool seems to require that the .options file be in the current directory!

platformio.ini

@@ -22,6 +22,7 @@
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
 ;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
 

src/ButtonThread.h

@@ -159,7 +159,7 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-#if defined(USE_EINK)
+#if defined(USE_EINK) && defined(PIN_EINK_EN)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
     }

src/Power.cpp

@@ -233,11 +233,14 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-
+    screen->setOn(false);
+#if defined(USE_EINK) && defined(PIN_EINK_EN)
+    digitalWrite(PIN_EINK_EN, LOW); //power off backlight first
+#endif
 
 #ifdef HAS_PMU
     DEBUG_MSG("Shutting down\n");
-    if(PMU){
+    if(PMU) {
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
         PMU->shutdown();
     }
@@ -312,7 +315,7 @@ int32_t Power::runOnce()
 #ifdef HAS_PMU
     // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
     // the IRQ status by reading the registers over I2C
-    if(PMU){
+    if(PMU) {
 
         PMU->getIrqStatus();
 
@@ -341,10 +344,11 @@ int32_t Power::runOnce()
         if (PMU->isBatRemoveIrq()) {
             DEBUG_MSG("Battery removed\n");
         }
-        if (PMU->isPekeyShortPressIrq()) {
-            DEBUG_MSG("PEK short button press\n");
-        }
         */
+        if (PMU->isPekeyLongPressIrq()) {
+            DEBUG_MSG("PEK long button press\n");
+            screen->setOn(false);
+        }
 
         PMU->clearIrqStatus();
     }
@@ -451,7 +455,6 @@ bool Power::axpChipInit()
         // Set constant current charging current
         PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
 
-    
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         // t-beam s3 core 

src/PowerFSM.cpp

@@ -337,7 +337,7 @@ void PowerFSM_setup()
 #ifdef ARCH_ESP32
     // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
-    // See: https://github.com/meshtastic/Meshtastic-device/issues/1071
+    // See: https://github.com/meshtastic/firmware/issues/1071
     if (isRouter || config.power.is_power_saving) {
         powerFSM.add_timed_transition(&stateNB, &stateLS, getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout");
         powerFSM.add_timed_transition(&stateDARK, &stateLS, getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL, "Bluetooth timeout");

src/configuration.h

@@ -143,7 +143,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define HAS_WIFI 0
 #endif
 #ifndef HAS_ETHERNET
-    #define ETHERNET 0
+    #define HAS_ETHERNET 0
 #endif
 #ifndef HAS_SCREEN
     #define HAS_SCREEN 0
@@ -166,6 +166,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_RTC
     #define HAS_RTC 0
 #endif
+#ifndef HAS_CPU_SHUTDOWN
+    #define HAS_CPU_SHUTDOWN 0
+#endif
+#ifndef HAS_BLUETOOTH
+    #define HAS_BLUETOOTH 0
+#endif
 
 #include "RF95Configuration.h"
 #include "DebugConfiguration.h"

src/graphics/EInkDisplay2.cpp

@@ -14,8 +14,8 @@
 #define TECHO_DISPLAY_MODEL GxEPD2_154_D67
 #elif defined(RAK4630)
 
-//GxEPD2_213_B74 - RAK14000 2.13 inch b/w 250x128 
-#define TECHO_DISPLAY_MODEL GxEPD2_213_B74
+//GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122 - changed from GxEPD2_213_B74 - which was not going to give partial update support
+#define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 
 //4.2 inch 300x400 - GxEPD2_420_M01
 //#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
@@ -46,9 +46,9 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl)
     setGeometry(GEOMETRY_RAWMODE, TECHO_DISPLAY_MODEL::WIDTH, TECHO_DISPLAY_MODEL::HEIGHT);
     #elif defined(RAK4630)
     
-    //GxEPD2_213_B74 - RAK14000 2.13 inch b/w 250x128 
+    //GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122 
     setGeometry(GEOMETRY_RAWMODE, 250, 122);
-    
+
     //GxEPD2_420_M01
     //setGeometry(GEOMETRY_RAWMODE, 300, 400);
 
@@ -110,14 +110,17 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         adafruitDisplay->display(false); // FIXME, use partial update mode
         #elif defined(RAK4630)
         
-        //RAK14000 2.13 inch b/w 250x122 does not support partial updates
-        adafruitDisplay->display(false); // FIXME, use partial update mode
+        //RAK14000 2.13 inch b/w 250x122 actually now does support partial updates
+        
+        //Full update mode (slow)
+        //adafruitDisplay->display(false); // FIXME, use partial update mode
         
         //Only enable for e-Paper with support for partial updates and comment out above adafruitDisplay->display(false); 
         // 1.54 inch 200x200 - GxEPD2_154_M09
+        // 2.13 inch 250x122 - GxEPD2_213_BN
         // 2.9 inch 296x128 - GxEPD2_290_T5D
         // 4.2 inch 300x400 - GxEPD2_420_M01
-        //adafruitDisplay->nextPage();
+        adafruitDisplay->nextPage();
         
         #elif defined(PCA10059) || defined(M5_COREINK)
         adafruitDisplay->nextPage();
@@ -190,11 +193,11 @@ bool EInkDisplay::connect()
         
         adafruitDisplay->init(115200, true, 10, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
 
-        //RAK14000 2.13 inch b/w 250x122 does not support partial updates 
+        //RAK14000 2.13 inch b/w 250x122 does actually now support partial updates 
         adafruitDisplay->setRotation(3);
-        //For 1.54, 2.9 and 4.2
+        //Partial update support for  1.54, 2.13 RAK14000 b/w , 2.9 and 4.2
         //adafruitDisplay->setRotation(1);
-        //adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     } else {
         (void)adafruitDisplay;
     }      

src/graphics/Screen.h

@@ -131,8 +131,7 @@ class Screen : public concurrency::OSThread
     void setOn(bool on)
     {
         if (!on)
-            handleSetOn(
-                false); // We handle off commands immediately, because they might be called because the CPU is shutting down
+            handleSetOn(false); // We handle off commands immediately, because they might be called because the CPU is shutting down
         else
             enqueueCmd(ScreenCmd{.cmd = on ? Cmd::SET_ON : Cmd::SET_OFF});
     }

src/mesh/Channels.cpp

@@ -218,9 +218,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app fucked up and forgot to set channelSettings.name
 
-        if (config.lora.bandwidth != 0)
-            channelName = "Custom";
-        else
+        if (config.lora.use_preset) {
             switch (config.lora.modem_preset) {
             case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
                 channelName = "ShortSlow";
@@ -247,6 +245,10 @@ const char *Channels::getName(size_t chIndex)
                 channelName = "Invalid";
                 break;
             }
+        }
+        else {
+            channelName = "Custom";
+        }
     }
 
     return channelName;
@@ -265,7 +267,7 @@ their nodes
 *
 * This function will also need to be implemented in GUI apps that talk to the radio.
 *
-* https://github.com/meshtastic/Meshtastic-device/issues/269
+* https://github.com/meshtastic/firmware/issues/269
 */
 const char *Channels::getPrimaryName()
 {

src/mesh/Channels.h

@@ -74,7 +74,7 @@ class Channels
      *
      * This function will also need to be implemented in GUI apps that talk to the radio.
      *
-     * https://github.com/meshtastic/Meshtastic-device/issues/269
+     * https://github.com/meshtastic/firmware/issues/269
     */
     const char *getPrimaryName();
 

src/mesh/generated/device_metadata.pb.h

@@ -16,6 +16,14 @@ typedef struct _DeviceMetadata {
     char firmware_version[18];
     /* Device state version */
     uint32_t device_state_version;
+    /* Indicates whether the device can shutdown CPU natively or via power management chip */
+    bool canShutdown;
+    /* Indicates that the device has native wifi capability */
+    bool hasWifi;
+    /* Indicates that the device has native bluetooth capability */
+    bool hasBluetooth;
+    /* Indicates that the device has an ethernet peripheral */
+    bool hasEthernet;
 } DeviceMetadata;
 
 
@@ -24,17 +32,25 @@ extern "C" {
 #endif
 
 /* Initializer values for message structs */
-#define DeviceMetadata_init_default              {"", 0}
-#define DeviceMetadata_init_zero                 {"", 0}
+#define DeviceMetadata_init_default              {"", 0, 0, 0, 0, 0}
+#define DeviceMetadata_init_zero                 {"", 0, 0, 0, 0, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define DeviceMetadata_firmware_version_tag      1
 #define DeviceMetadata_device_state_version_tag  2
+#define DeviceMetadata_canShutdown_tag           3
+#define DeviceMetadata_hasWifi_tag               4
+#define DeviceMetadata_hasBluetooth_tag          5
+#define DeviceMetadata_hasEthernet_tag           6
 
 /* Struct field encoding specification for nanopb */
 #define DeviceMetadata_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   firmware_version,   1) \
-X(a, STATIC,   SINGULAR, UINT32,   device_state_version,   2)
+X(a, STATIC,   SINGULAR, UINT32,   device_state_version,   2) \
+X(a, STATIC,   SINGULAR, BOOL,     canShutdown,       3) \
+X(a, STATIC,   SINGULAR, BOOL,     hasWifi,           4) \
+X(a, STATIC,   SINGULAR, BOOL,     hasBluetooth,      5) \
+X(a, STATIC,   SINGULAR, BOOL,     hasEthernet,       6)
 #define DeviceMetadata_CALLBACK NULL
 #define DeviceMetadata_DEFAULT NULL
 
@@ -44,7 +60,7 @@ extern const pb_msgdesc_t DeviceMetadata_msg;
 #define DeviceMetadata_fields &DeviceMetadata_msg
 
 /* Maximum encoded size of messages (where known) */
-#define DeviceMetadata_size                      25
+#define DeviceMetadata_size                      33
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/portnums.pb.h

@@ -81,7 +81,7 @@ typedef enum _PortNum {
     PortNum_SIMULATOR_APP = 69, 
     /* Private applications should use portnums >= 256.
  To simplify initial development and testing you can use "PRIVATE_APP"
- in your code without needing to rebuild protobuf files (via [regen-protos.sh](https://github.com/meshtastic/Meshtastic-device/blob/master/bin/regen-protos.sh)) */
+ in your code without needing to rebuild protobuf files (via [regen-protos.sh](https://github.com/meshtastic/firmware/blob/master/bin/regen-protos.sh)) */
     PortNum_PRIVATE_APP = 256, 
     /* ATAK Forwarder Module https://github.com/paulmandal/atak-forwarder */
     PortNum_ATAK_FORWARDER = 257, 

src/mesh/http/ContentHandler.cpp

@@ -58,8 +58,6 @@ char contentTypes[][2][32] = {{".txt", "text/plain"},     {".html", "text/html"}
                               {".css", "text/css"},       {".ico", "image/vnd.microsoft.icon"},
                               {".svg", "image/svg+xml"},  {"", ""}};
 
-// const char *tarURL = "https://www.casler.org/temp/meshtastic-web.tar";
-// const char *tarURL = "https://api-production-871d.up.railway.app/mirror/webui";
 // const char *certificate = NULL; // change this as needed, leave as is for no TLS check (yolo security)
 
 // Our API to handle messages to and from the radio.
@@ -75,8 +73,8 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer)
     ResourceNode *nodeAPIv1ToRadio = new ResourceNode("/api/v1/toradio", "PUT", &handleAPIv1ToRadio);
     ResourceNode *nodeAPIv1FromRadio = new ResourceNode("/api/v1/fromradio", "GET", &handleAPIv1FromRadio);
 
-//    ResourceNode *nodeHotspotApple = new ResourceNode("/hotspot-detect.html", "GET", &handleHotspot);
-//    ResourceNode *nodeHotspotAndroid = new ResourceNode("/generate_204", "GET", &handleHotspot);
+    //    ResourceNode *nodeHotspotApple = new ResourceNode("/hotspot-detect.html", "GET", &handleHotspot);
+    //    ResourceNode *nodeHotspotAndroid = new ResourceNode("/generate_204", "GET", &handleHotspot);
 
     ResourceNode *nodeAdmin = new ResourceNode("/admin", "GET", &handleAdmin);
     //    ResourceNode *nodeAdminSettings = new ResourceNode("/admin/settings", "GET", &handleAdminSettings);
@@ -160,7 +158,7 @@ void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res)
     res->setHeader("Content-Type", "application/x-protobuf");
     res->setHeader("Access-Control-Allow-Origin", "*");
     res->setHeader("Access-Control-Allow-Methods", "GET");
-    res->setHeader("X-Protobuf-Schema", "https://raw.githubusercontent.com/meshtastic/Meshtastic-protobufs/master/mesh.proto");
+    res->setHeader("X-Protobuf-Schema", "https://raw.githubusercontent.com/meshtastic/protobufs/master/mesh.proto");
 
     uint8_t txBuf[MAX_STREAM_BUF_SIZE];
     uint32_t len = 1;
@@ -204,7 +202,7 @@ void handleAPIv1ToRadio(HTTPRequest *req, HTTPResponse *res)
     res->setHeader("Access-Control-Allow-Headers", "Content-Type");
     res->setHeader("Access-Control-Allow-Origin", "*");
     res->setHeader("Access-Control-Allow-Methods", "PUT, OPTIONS");
-    res->setHeader("X-Protobuf-Schema", "https://raw.githubusercontent.com/meshtastic/Meshtastic-protobufs/master/mesh.proto");
+    res->setHeader("X-Protobuf-Schema", "https://raw.githubusercontent.com/meshtastic/protobufs/master/mesh.proto");
 
     if (req->getMethod() == "OPTIONS") {
         res->setStatusCode(204); // Success with no content
@@ -266,7 +264,7 @@ std::vector<std::map<char *, char *>> *htmlListDir(std::vector<std::map<char *,
             if (levels) {
 #ifdef ARCH_ESP32
                 htmlListDir(fileList, file.path(), levels - 1);
-#else                
+#else
                 htmlListDir(fileList, file.name(), levels - 1);
 #endif
                 file.close();
@@ -274,7 +272,7 @@ std::vector<std::map<char *, char *>> *htmlListDir(std::vector<std::map<char *,
         } else {
             std::map<char *, char *> thisFileMap;
             thisFileMap[strdup("size")] = strdup(String(file.size()).c_str());
-#ifdef ARCH_ESP32            
+#ifdef ARCH_ESP32
             thisFileMap[strdup("name")] = strdup(String(file.path()).substring(1).c_str());
 #else
             thisFileMap[strdup("name")] = strdup(String(file.name()).substring(1).c_str());

src/modules/AdminModule.cpp

@@ -441,6 +441,10 @@ void AdminModule::handleGetDeviceMetadata(const MeshPacket &req) {
     DeviceMetadata deviceMetadata;
     strncpy(deviceMetadata.firmware_version, myNodeInfo.firmware_version, 18);
     deviceMetadata.device_state_version = DEVICESTATE_CUR_VER;
+    deviceMetadata.canShutdown = pmu_found || HAS_CPU_SHUTDOWN;
+    deviceMetadata.hasBluetooth = HAS_BLUETOOTH;
+    deviceMetadata.hasWifi = HAS_WIFI;
+    deviceMetadata.hasEthernet = HAS_ETHERNET;
 
     r.get_device_metadata_response = deviceMetadata;
     r.which_payload_variant = AdminMessage_get_device_metadata_response_tag;

src/modules/ExternalNotificationModule.cpp

@@ -16,10 +16,10 @@
 /*
 
     Documentation:
-        https://github.com/meshtastic/Meshtastic-device/blob/master/docs/software/modules/ExternalNotificationModule.md
+        https://github.com/meshtastic/firmware/blob/master/docs/software/modules/ExternalNotificationModule.md
 
     This module supports:
-        https://github.com/meshtastic/Meshtastic-device/issues/654
+        https://github.com/meshtastic/firmware/issues/654
 
 
     Quick reference:

src/platform/esp32/architecture.h

@@ -80,6 +80,8 @@
     #define HW_VENDOR HardwareModel_M5STACK
 #elif defined(STATION_G1)
     #define HW_VENDOR HardwareModel_STATION_G1
+#elif defined(DR_DEV)
+    #define HW_VENDOR HardwareModel_DR_DEV
 #endif
 
 //

src/platform/nrf52/architecture.h

@@ -26,6 +26,9 @@
 #ifndef HAS_RADIO
     #define HAS_RADIO 1
 #endif
+#ifdef HAS_CPU_SHUTDOWN
+    #define HAS_CPU_SHUTDOWN 1
+#endif
 
 //
 // set HW_VENDOR

src/shutdown.h

@@ -17,7 +17,7 @@ void powerCommandsCheck()
 #endif
     }
 
-#if defined(ARCH_NRF52)
+#if defined(ARCH_NRF52) || defined(HAS_PMU)
     if (shutdownAtMsec) {
         screen->startShutdownScreen();
         playBeep();

variants/diy/dr-dev/variant.h

@@ -0,0 +1,69 @@
+// For OLED LCD
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+// GPS
+#undef GPS_RX_PIN
+#define GPS_RX_PIN NOT_A_PIN
+#undef WANT_GPS
+
+#define BUTTON_PIN 2 // The middle button GPIO on the T-Beam
+#define BUTTON_NEED_PULLUP
+#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
+
+#define LORA_DIO0 -1  // a No connect on the SX1262/SX1268 module
+#define LORA_RESET -1 // RST for SX1276, and for SX1262/SX1268
+#define LORA_DIO1 27  // IRQ for SX1262/SX1268 (IO26 FOR 22S)
+#define LORA_DIO2 NOT_A_PIN  // BUSY for SX1262/SX1268
+#define LORA_DIO3     // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
+
+// In transmitting, set TXEN as high communication level，RXEN pin is low level;
+// In receiving, set RXEN as high communication level, TXEN is lowlevel;
+// Before powering off, set TXEN、RXEN as low level.
+#define LORA_RXEN 17  // Input - RF switch RX control, connecting external MCU IO, valid in high level
+#define LORA_TXEN -1 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
+/*  --PINS FOR THE 900M22S
+#undef RF95_SCK
+#define RF95_SCK 18
+#undef RF95_MISO
+#define RF95_MISO 19
+#undef RF95_MOSI
+#define RF95_MOSI 23
+#undef RF95_NSS
+#define RF95_NSS 16
+*/
+
+// PINS FOR THE 900M30S
+#undef RF95_SCK
+#define RF95_SCK 18
+#undef RF95_MISO
+#define RF95_MISO 19
+#undef RF95_MOSI
+#define RF95_MOSI 23
+#undef RF95_NSS
+#define RF95_NSS 33
+
+// RX/TX for RFM95/SX127x
+#define RF95_RXEN LORA_RXEN
+#define RF95_TXEN LORA_TXEN
+// #define RF95_TCXO <GPIO#>
+
+// common pinouts for SX126X modules
+#define SX126X_CS 33
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 35
+#define SX126X_RESET LORA_RESET
+#define SX126X_RXEN LORA_RXEN
+#define SX126X_TXEN LORA_TXEN
+
+// supported modules list
+#define USE_RF95 // RFM95/SX127x
+#define USE_SX1262
+#define USE_SX1268
+#define USE_LLCC68
+
+#ifdef EBYTE_E22
+// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
+// (which is the default for the sx1262interface code)
+#define SX126X_E22
+#endif

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
-major = 1
-minor = 3
-build = 48
+major = 2
+minor = 0
+build = 0