Merge pull request #2053 from meshtastic/upstream-heltec

Move to upstream espressif arduino

.github/ISSUE_TEMPLATE/feature.yml

@@ -0,0 +1,27 @@
+name: Feature Request
+description: Request a new feature
+title: "[Feature Request]: "
+labels: ["enhancement"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for your request this will not gurantee that we will implement it, but it will be reviewed.
+  - type: dropdown
+    id: soc
+    attributes:
+      label: Platform
+      description: What device platform will support your feature?
+      multiple: true
+      options:
+        - NRF52
+        - ESP32
+    validations:
+      required: true
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide details about your enhancement.
+    validations:
+      required: true

.github/actions/setup-base/action.yml

@@ -0,0 +1,41 @@
+name: 'Setup Build Base Composite Action'
+description: 'Base build actions for Meshtastic Platform IO steps'
+
+runs:
+  using: "composite"
+  steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+      with:
+        submodules: "recursive"
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+    
+    - name: Install cppcheck
+      shell: bash
+      run: |
+        sudo apt-get install -y cppcheck
+
+    - name: Setup Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v3
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      shell: bash
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio adafruit-nrfutil
+        pip install -U meshtastic --pre
+
+    - name: Upgrade platformio
+      shell: bash
+      run: |
+        pio upgrade

.github/workflows/build_esp32.yml

@@ -0,0 +1,54 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-esp32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/web"
+          file: "build.tar"
+          target: "build.tar"
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/firmware-ota"
+          file: "firmware.bin"
+          target: "release/bleota.bin"
+          token: ${{ secrets.GITHUB_TOKEN }}
+      
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_nrf52.yml

@@ -0,0 +1,33 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-nrf52:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build NRF52
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.zip

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,32 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs: 
+  build-rpi2040:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build Raspberry Pi 2040
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/main_matrix.yml

@@ -2,14 +2,14 @@ name: CI
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches: [master]
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       - "version.properties"
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches: [master]
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -23,59 +23,22 @@ jobs:
       matrix:
         include:
           - board: rak11200
-          - board: tlora-v2
-          - board: tlora-v1
-          - board: tlora_v1_3
           - board: tlora-v2-1-1.6
           - board: tbeam
-          - board: heltec-v1
-          - board: heltec-v2.0
           - board: heltec-v2.1
-          - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: rak4631
-          - board: rak4631_eink
           - board: t-echo
-          - board: nano-g1
           - board: station-g1
-          - board: m5stack-core
           - board: m5stack-coreink
           - board: tbeam-s3-core
-        # - board: pico
-          
+
     runs-on: ubuntu-latest
     steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install cppcheck
-        run: |
-          sudo apt-get install -y cppcheck
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Cache python libs
-        uses: actions/cache@v1
-        id: cache-pip # needed in if test
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip
-
-      - name: Upgrade python tools and install platformio
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -94,80 +57,19 @@ jobs:
           - board: heltec-v1
           - board: heltec-v2.0
           - board: heltec-v2.1
+          - board: heltec-v3
+          - board: heltec-wsl-v3
           - board: tbeam0.7
           - board: meshtastic-diy-v1
+          - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           - board: tbeam-s3-core
-
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Cache python libs
-        uses: actions/cache@v1
-        id: cache-pip # needed in if test
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip
-
-      - name: Upgrade python tools
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
-          
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: "meshtastic/meshtastic-web"
-          file: "build.tar"
-          target: "build.tar"
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ matrix.board }}
-         
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: "meshtastic/Meshtastic-OTA"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          
-      - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
-        with:
-          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
-          path: |
-            release/*.bin
-            release/*.elf
-          retention-days: 90
+    uses: ./.github/workflows/build_esp32.yml
+    with:
+      board: ${{ matrix.board }}
 
   build-nrf52:
     strategy:
@@ -179,53 +81,10 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: pca10059_diy_eink
-
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Cache python libs
-        uses: actions/cache@v1
-        id: cache-pip # needed in if test
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip
-
-      - name: Upgrade python tools
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
-
-      - name: Build NRF52
-        run: bin/build-nrf52.sh ${{ matrix.board }}
-
-      - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
-        with:
-          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
-          path: |
-            release/*.uf2
-            release/*.elf
-            release/*.zip
-          retention-days: 90
+          - board: feather_diy
+    uses: ./.github/workflows/build_nrf52.yml
+    with:
+      board: ${{ matrix.board }}
 
   build-rpi2040:
     strategy:
@@ -234,84 +93,17 @@ jobs:
       matrix:
         include:
           - board: pico
-
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Cache python libs
-        uses: actions/cache@v1
-        id: cache-pip # needed in if test
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip
-
-      - name: Upgrade python tools
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
-
-      - name: Build Raspberry Pi 2040
-        run: ./bin/build-rpi2040.sh ${{ matrix.board }}
-
-      - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
-        with:
-          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
-          path: |
-            release/*.uf2
-            release/*.elf
-          retention-days: 90
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
 
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Cache python libs
-        uses: actions/cache@v1
-        id: cache-pip # needed in if test
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip
-
-      - name: Upgrade python tools
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-          pip install -U meshtastic --pre
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       # We now run integration test before other build steps (to quickly see runtime failures)
       - name: Build for native
@@ -327,19 +119,37 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-native-${{ steps.version.outputs.version }}.zip
           path: |
-            release/meshtasticd_linux_amd64
             release/device-*.sh
             release/device-*.bat
-          retention-days: 90
+      
+      - name: Docker login
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/login-action@v2
+        with: 
+          username: meshtastic
+          password: ${{ secrets.DOCKER_TOKEN }}
 
+      - name: Docker setup
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/setup-buildx-action@v2
+
+      - name: Docker build and push
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/build-push-action@v3
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest
+      
   after-checks:
     runs-on: ubuntu-latest
     needs: [check]
@@ -360,31 +170,30 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           path: ./
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-1*/littlefs*.bin ./*tbeam-1*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: |
             ./*.bin
             ./*.uf2
             ./firmware-*-ota.zip
-            ./meshtasticd_linux_amd64
             ./device-*.sh
             ./device-*.bat
           retention-days: 90
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
@@ -392,21 +201,21 @@ jobs:
       # For diagnostics
       - name: Show artifacts
         run: ls -lR
-        
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
           path: ./*.elf
-          retention-days: 90
+          retention-days: 30
 
       - name: Create request artifacts
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
@@ -426,37 +235,37 @@ jobs:
     needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
-          
+        uses: actions/checkout@v3
+
       - name: Setup Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3.x
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
-      
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
           path: ./elfs
-      
+
       - name: Zip Elfs
-        run: zip -j -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
 
       # For diagnostics
       - name: Show artifacts
@@ -468,7 +277,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Device ${{ steps.version.outputs.version }} alpha - Public Preview
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
@@ -498,10 +307,9 @@ jobs:
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
-          
+
       - name: Create version.properties pull request
         uses: peter-evans/create-pull-request@v3
         with:
           add-paths: |
             version.properties
-

.github/workflows/sec_sast_flawfinder.yml

@@ -0,0 +1,40 @@
+---
+name: Flawfinder Scan
+
+on:
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - "version.properties"
+
+jobs:
+  flawfinder:
+      runs-on: ubuntu-latest
+      name: Flawfinder
+
+      steps:
+        # step 1
+        - name: clone application source code
+          uses: actions/checkout@v3
+
+        # step 2
+        - name: flawfinder_scan
+          uses: david-a-wheeler/flawfinder@2.0.19
+          with:
+            arguments: '--sarif ./'
+            output: 'flawfinder_report.sarif'
+
+        # step 3
+        - name: save report as pipeline artifact
+          uses: actions/upload-artifact@v3
+          with:
+            name: flawfinder_report.sarif
+            path: flawfinder_report.sarif
+
+        # step 4
+        - name: publish code scanning alerts
+          uses: github/codeql-action/upload-sarif@v2
+          with:
+            sarif_file: flawfinder_report.sarif
+            category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -0,0 +1,44 @@
+---
+name: Semgrep Full Scan
+
+on:
+  workflow_dispatch:
+    branches:
+      - master
+  schedule:
+    - cron:  '0 1 * * 6'
+
+jobs:
+
+  semgrep-full:
+      runs-on: ubuntu-latest
+      container:
+        image: returntocorp/semgrep
+
+      steps:
+
+        # step 1
+        - name: clone application source code
+          uses: actions/checkout@v3
+
+        # step 2
+        - name: full scan
+          run: |
+            semgrep \
+              --sarif --output report.sarif \
+              --metrics=off \
+              --config="p/default"
+
+        # step 3
+        - name: save report as pipeline artifact
+          uses: actions/upload-artifact@v3
+          with:
+            name: report.sarif
+            path: report.sarif
+
+        # step 4
+        - name: publish code scanning alerts
+          uses: github/codeql-action/upload-sarif@v2
+          with:
+            sarif_file: report.sarif
+            category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -0,0 +1,28 @@
+---
+name: Semgrep Differential Scan
+on:
+  pull_request
+
+jobs:
+
+  semgrep-diff:
+    runs-on: ubuntu-latest
+    container:
+      image: returntocorp/semgrep
+
+    steps:
+
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+
+      # step 2
+      - name: differential scan
+        run: |
+          semgrep scan \
+            --error \
+            --metrics=off \
+            --baseline-commit ${{ github.event.pull_request.base.sha }} \
+            --config="p/default"

.github/workflows/update_protobufs.yml

@@ -17,9 +17,9 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.6-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.6-linux-x86.tar.gz
-          mv nanopb-0.4.6-linux-x86 nanopb-0.4.6
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
+          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
 
       - name: Re-generate protocol buffers
         run: |

.gitignore

@@ -29,3 +29,4 @@ __pycache__
 
 venv/
 release/
+.vscode/extensions.json

.gitmodules

@@ -1,3 +1,3 @@
 [submodule "protobufs"]
 	path = protobufs
-	url = https://github.com/meshtastic/Meshtastic-protobufs.git
+	url = https://github.com/meshtastic/protobufs.git

.semgrepignore

@@ -0,0 +1,2 @@
+.github/workflows/main_matrix.yml
+src/mesh/compression/unishox2.c

Dockerfile

@@ -0,0 +1,41 @@
+FROM debian:bullseye-slim AS builder
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# http://bugs.python.org/issue19846
+# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
+ENV LANG C.UTF-8
+
+SHELL ["/bin/bash", "-o", "pipefail", "-c"]
+
+# Install build deps
+USER root
+RUN apt-get update && \
+	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
+
+# create a non-priveleged user & group
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+
+USER mesh
+RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
+	chmod +x /tmp/get-platformio.py && \
+	python3 /tmp/get-platformio.py && \
+	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
+	cd /tmp/firmware && \
+	chmod +x /tmp/firmware/bin/build-native.sh && \
+	source ~/.platformio/penv/bin/activate && \
+	./bin/build-native.sh
+
+FROM frolvlad/alpine-glibc
+
+RUN apk --update add --no-cache g++ shadow && \
+	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+
+COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
+
+USER mesh
+WORKDIR /home/mesh
+CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+
+HEALTHCHECK NONE

README.md

@@ -1,8 +1,8 @@
 # Meshtastic Firmware
 
-![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/meshtastic-device/total)
-[![CI](https://img.shields.io/github/workflow/status/meshtastic/Meshtastic-device/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/repo/actions/workflows/main_matrix.yml)
-[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/Meshtastic-device)](https://cla-assistant.io/meshtastic/Meshtastic-device)
+![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
+[![CI](https://img.shields.io/github/workflow/status/meshtastic/firmware/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/main_matrix.yml)
+[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/firmware)](https://cla-assistant.io/meshtastic/firmware)
 [![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
 [![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
@@ -10,10 +10,9 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-
-**[Building Instructions](https://meshtastic.org/docs/developers/Firmware/build)**
+**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
 **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 
-![Alt](https://repobeats.axiom.co/api/embed/99a2cf5622bb4807f9e8c3b86589f1133cce58a2.svg 'Repobeats analytics image')
+![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")

arch/esp32/esp32.ini

@@ -3,7 +3,7 @@
 extends = arduino_base
 platform = platformio/espressif32@^5.2.0
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
 upload_speed = 921600
 debug_init_break = tbreak setup
 monitor_filters = esp32_exception_decoder
@@ -26,15 +26,16 @@ build_flags =
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#657509856ce97e9dddeffb89a559f544faefd5cd
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
-  arduino-libraries/NTPClient@^3.1.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32s2.ini

@@ -0,0 +1,47 @@
+[esp32s2_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
+upload_speed = 961200
+monitor_speed = 115200
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags} 
+  -Wall 
+  -Wextra 
+  -Isrc/platform/esp32 
+  -std=c++11 
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial 
+  -DCONFIG_BT_NIMBLE_ENABLED 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DHAS_BLUETOOTH=0
+  -DDEBUG_HEAP 
+  
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
+

arch/esp32/esp32s3.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform = platformio/espressif32@^5.2.0
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
 upload_speed = 961200
 monitor_speed = 115200
 debug_init_break = tbreak setup
@@ -23,18 +23,19 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial 
   -DCONFIG_BT_NIMBLE_ENABLED 
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING  
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DDEBUG_HEAP 
   
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#657509856ce97e9dddeffb89a559f544faefd5cd
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.0
-  arduino-libraries/NTPClient@^3.1.0
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  caveman99/ESP32 Codec2@^1.0.1
 
 lib_ignore = 
   segger_rtt

arch/nrf52/nrf52.ini

@@ -8,7 +8,7 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable 
   -Isrc/platform/nrf52
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
 lib_ignore =
   BluetoothOTA
   

arch/portduino/portduino.ini

@@ -1,5 +1,7 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
+platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+framework = arduino
 build_src_filter = 
   ${env.build_src_filter} 
   -<platform/esp32/> 
@@ -7,7 +9,8 @@ build_src_filter =
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
   -<platform/rp2040>
-  -<mesh/http/> 
+  -<mesh/http/>
+  -<mesh/eth/>
   -<modules/esp32>
   -<modules/Telemetry>
   +<../variants/portduino>
@@ -15,5 +18,4 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74
 build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino

arch/rp2040/rp2040.ini

@@ -1,6 +1,6 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#5ce1a228e7cae453f366deb8962252b9b7356bbc
 extends = arduino_base
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -10,7 +10,7 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
 lib_ignore =
   BluetoothOTA
 lib_deps =

arch/stm32/stm32wl5e.ini

@@ -10,7 +10,7 @@ build_flags =
 #  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
 #  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
 lib_deps =
   ${env.lib_deps}
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

bin/build-all.sh.legacy

@@ -1,109 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
-
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
-#BOARDS_ESP32=tbeam
-
-# FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine
-BOARDS_NRF52="rak4631 rak4631_eink t-echo pca10059_diy_eink"
-#BOARDS_NRF52=""
-
-OUTDIR=release/latest
-
-# We keep all old builds (and their map files in the archive dir)
-ARCHIVEDIR=release/archive 
-
-rm -f $OUTDIR/firmware*
-
-mkdir -p $OUTDIR/bins $ARCHIVEDIR
-rm -r $OUTDIR/bins/* || true
-mkdir -p $OUTDIR/bins/universal $OUTDIR/elfs/universal
-
-# build the named environment and copy the bins to the release directory
-function do_build() {
-	BOARD=$1
-	isNrf=$3
-	
-    echo "Building for $BOARD ($isNrf) with $PLATFORMIO_BUILD_FLAGS"
-    rm -f .pio/build/$BOARD/firmware.*
-
-    # The shell vars the build tool expects to find
-    export APP_VERSION=$VERSION
-
-    basename=universal/firmware-$BOARD-$VERSION
-
-    pio run --environment $BOARD # -v
-    SRCELF=.pio/build/$BOARD/firmware.elf
-    cp $SRCELF $OUTDIR/elfs/$basename.elf
-
-    if [ "$isNrf" = "false" ]
-    then
-        echo "Copying ESP32 bin file"
-        SRCBIN=.pio/build/$BOARD/firmware.bin
-        cp $SRCBIN $OUTDIR/bins/$basename.bin
-    else
-        echo "Generating NRF52 uf2 file"
-        SRCHEX=.pio/build/$BOARD/firmware.hex
-        bin/uf2conv.py $SRCHEX -c -o $OUTDIR/bins/$basename.uf2 -f 0xADA52840
-    fi
-}
-
-function do_boards() {
-	declare boards=$1
-	declare isNrf=$2
-	for board in $boards; do
-		# Build universal
-        echo "about to build $board $isNrf"
-		do_build $board "" "$isNrf" 
-	done
-}
-
-# Make sure our submodules are current
-git submodule update 
-
-# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
-
-do_boards "$BOARDS_ESP32" "false"
-do_boards "$BOARDS_NRF52" "true"
-
-pio run --environment native
-cp .pio/build/native/program $OUTDIR/bins/universal/meshtasticd_linux_amd64
-
-echo "Building Filesystem for ESP32 targets"
-pio run --environment tbeam -t buildfs
-cp .pio/build/tbeam/spiffs.bin $OUTDIR/bins/universal/littlefs-$VERSION.bin
-
-# keep the bins in archive also
-cp $OUTDIR/bins/universal/littlefs* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
-
-echo Updating android bins $OUTDIR/forandroid
-rm -rf $OUTDIR/forandroid
-mkdir -p $OUTDIR/forandroid
-cp -a $OUTDIR/bins/universal/*.bin $OUTDIR/forandroid/
-
-cat >$OUTDIR/curfirmwareversion.xml <<XML
-<?xml version="1.0" encoding="utf-8"?>
-
-<!-- This file is kept in source control because it reflects the last stable
-release.  It is used by the android app for forcing software updates.  Do not edit.
-Generated by bin/buildall.sh -->
-
-<resources>
-    <string name="cur_firmware_version" translatable="false">$VERSION</string>
-    <string name="short_firmware_version" translatable="false">$SHORT_VERSION</string>
-</resources>
-XML
-
-echo Generating $ARCHIVEDIR/firmware-$VERSION.zip
-rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $ARCHIVEDIR/littlefs-$VERSION.bin $OUTDIR/bins/universal/firmware-*-$VERSION.* $OUTDIR/bins/universal/meshtasticd* images/system-info.bin bin/device-install.* bin/device-update.*
-echo Generating $ARCHIVEDIR/elfs-$VERSION.zip
-rm -f $ARCHIVEDIR/elfs-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/elfs-$VERSION.zip $OUTDIR/elfs/universal/firmware-*-$VERSION.*
-
-echo BUILT ALL

bin/build-esp32.sh

@@ -10,11 +10,8 @@ OUTDIR=release/
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
-# Make sure our submodules are current
-git submodule update 
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
+platformio pkg update 
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -32,6 +29,10 @@ echo "Copying ESP32 bin file"
 SRCBIN=.pio/build/$1/firmware.factory.bin
 cp $SRCBIN $OUTDIR/$basename.bin
 
+echo "Copying ESP32 update bin file"
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
+
 echo "Building Filesystem for ESP32 targets"
 pio run --environment tbeam -t buildfs
 cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin

bin/build-native.sh

@@ -12,11 +12,8 @@ rm -f $OUTDIR/firmware*
 mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
-# Make sure our submodules are current
-git submodule update 
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
+platformio pkg update 
 
 pio run --environment native
 cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64

bin/build-nrf52.sh

@@ -10,11 +10,8 @@ OUTDIR=release/
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
-# Make sure our submodules are current
-git submodule update 
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
+platformio pkg update 
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rpi2040.sh

@@ -10,11 +10,8 @@ OUTDIR=release/
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
-# Make sure our submodules are current
-git submodule update 
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio lib update 
+platformio pkg update 
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/device-install.bat

@@ -26,7 +26,7 @@ IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
 	goto HELP
 )
-IF EXIST %FILENAME% (
+IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
@@ -37,6 +37,9 @@ IF EXIST %FILENAME% (
 ) else (
     echo "Invalid file: %FILENAME%"
 	goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -14,6 +14,7 @@ Flash image file to device, but first erasing and writing system information"
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+
 EOF
 }
 
@@ -44,7 +45,7 @@ shift "$((OPTIND-1))"
     shift
 }
 
-if [ -f "${FILENAME}" ]; then
+if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
 	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
@@ -52,8 +53,8 @@ if [ -f "${FILENAME}" ]; then
 	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
 
 else
-	echo "Invalid file: ${FILENAME}"
 	show_help
+	echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/device-update.bat

@@ -10,7 +10,7 @@ echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
-echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
 goto EOF
 
 :GETOPTS
@@ -26,9 +26,12 @@ IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
 	goto HELP
 )
-IF EXIST %FILENAME% (
+IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
 	goto HELP

bin/device-update.sh

@@ -11,7 +11,8 @@ Flash image file to device, leave existing system intact."
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+    
 EOF
 }
 
@@ -42,12 +43,12 @@ shift "$((OPTIND-1))"
     shift
 }
 
-if [ -f "${FILENAME}" ]; then
-	echo "Trying to flash update ${FILENAME}."
-	$PYTHON -m esptool --baud 115200 write_flash 0x00 ${FILENAME}
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
+	printf "Trying to flash update ${FILENAME}"
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
 else
-	echo "Invalid file: ${FILENAME}"
 	show_help
+	echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/promote-release.sh

@@ -9,9 +9,6 @@ VERSION=`bin/buildinfo.py long`
 # Must have a V prefix to trigger github
 git tag "v${VERSION}"
 
-# Commented out per https://github.com/meshtastic/Meshtastic-device/issues/947
-#git push root "v${VERSION}" # push the tag
-
 git push origin "v${VERSION}" # push the tag
 
 echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.6\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto
+cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto

bin/regen-protos.sh

@@ -2,13 +2,13 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.6 to be located in the"
-echo "meshtastic-device root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.6"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "firmware root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.7"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.6/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
+../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
 
 #echo "Regenerating protobuf documentation - if you see an error message"
 #echo "you can ignore it unless doing a new protobuf release to github."

boards/tbeam-s3-core.json

@@ -1,6 +1,6 @@
 {
   "build": {
-    "arduino":{
+    "arduino": {
       "ldscript": "esp32s3_out.ld"
     },
     "core": "esp32",
@@ -8,9 +8,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_DFU_ON_BOOT=1",
-      "-DARDUINO_USB_MSC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
@@ -45,4 +43,4 @@
   },
   "url": "http://www.lilygo.cn/",
   "vendor": "LilyGo"
-}
+}

docker-compose.yml

@@ -0,0 +1,13 @@
+version: "3.7"
+
+services:
+  meshtastic-node:
+    build: .
+    deploy:
+      mode: replicated
+      replicas: 4
+    networks:
+      - mesh
+    
+networks:
+  mesh:

platformio.ini

@@ -22,6 +22,7 @@
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
 ;default_envs = meshtastic-diy-v1.1
+;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
 
@@ -36,12 +37,24 @@ extra_scripts = bin/platformio-custom.py
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
+; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
   -Wno-format 
   -Isrc -Isrc/mesh -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map 
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
+  -DRADIOLIB_EXCLUDE_CC1101
+  -DRADIOLIB_EXCLUDE_NRF24
+  -DRADIOLIB_EXCLUDE_RF69
+  -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SI443X
+  -DRADIOLIB_EXCLUDE_RFM2X
+  -DRADIOLIB_EXCLUDE_AFSK
+  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
+  -DRADIOLIB_EXCLUDE_MORSE
+  -DRADIOLIB_EXCLUDE_RTTY
+  -DRADIOLIB_EXCLUDE_SSTV
 
 monitor_speed = 115200
 
@@ -49,33 +62,36 @@ lib_deps =
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#53580644255b48ebb7a737343c6b4e71c7e11cf2 ; ESP8266_SSD1306 
   mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#2f0d0528d737000043e949f4c3bdfb623cf0b902
+  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   nanopb/Nanopb@^0.4.6
   erriez/ErriezCRC32@^1.0.1
+  jgromes/RadioLib@^5.5.0
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
+check_flags =
+  -DAPP_VERSION=1.0.0
+  --suppressions-list=suppressions.txt
+  --inline-suppr
 
 ; Common settings for conventional (non Portduino) Arduino targets
 [arduino_base]
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  ; Portduino is using meshtastic fork for now
-  jgromes/RadioLib@5.4.1
+  mprograms/QMC5883LCompass@^1.1.1
+  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#52b5282639d08a8cbd4b748363089eed6102dc76
 
-build_flags = ${env.build_flags} -Os 
-  -DRADIOLIB_SPI_PARANOID=0
-# -DRADIOLIB_GODMODE
+build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT 
 [networking_base]
 lib_deps =
   knolleary/PubSubClient@^2.8
-  meshtastic/json11@^1.0.2
+  arduino-libraries/NTPClient@^3.1.0
 
 ; Common libs for environmental measurements in telemetry module 
 ; (not included in native / portduino)
@@ -89,4 +105,5 @@ lib_deps =
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
-
+  adafruit/Adafruit SHTC3 Library@^1.0.0
+  adafruit/Adafruit LPS2X@^2.0.4

src/BluetoothCommon.cpp

@@ -7,7 +7,7 @@ const uint8_t MESH_SERVICE_UUID_16[16u] = {0xfd, 0xea, 0x73, 0xe2, 0xca, 0x5d, 0
                                            0x1f, 0x46, 0xa8, 0x15, 0x18, 0xb2, 0xa1, 0x6b};
 const uint8_t TORADIO_UUID_16[16u] = {0xe7, 0x01, 0x44, 0x12, 0x66, 0x78, 0xdd, 0xa1,
                                       0xad, 0x4d, 0x9e, 0x12, 0xd2, 0x76, 0x5c, 0xf7};
-const uint8_t FROMRADIO_UUID_16[16u] = {0xd5, 0x54, 0xe4, 0xc5, 0x25, 0xc5, 0x31, 0xa5,
-                                        0x55, 0x4a, 0x02, 0xee, 0xc2, 0xbc, 0xa2, 0x8b};
+const uint8_t FROMRADIO_UUID_16[16u] = {0x02, 0x00, 0x12, 0xac, 0x42, 0x02, 0x78, 0xb8,
+                                        0xed, 0x11, 0x93, 0x49, 0x9e, 0xe6, 0x55, 0x2c};
 const uint8_t FROMNUM_UUID_16[16u] = {0x53, 0x44, 0xe3, 0x47, 0x75, 0xaa, 0x70, 0xa6,
                                       0x66, 0x4f, 0x00, 0xa8, 0x8c, 0xa1, 0x9d, 0xed};

src/ButtonThread.h

@@ -51,6 +51,7 @@ class ButtonThread : public concurrency::OSThread
         pinMode(BUTTON_PIN, INPUT_PULLUP_SENSE);
 #endif
         userButton.attachClick(userButtonPressed);
+        userButton.setClickTicks(300);
         userButton.attachDuringLongPress(userButtonPressedLong);
         userButton.attachDoubleClick(userButtonDoublePressed);
         userButton.attachMultiClick(userButtonMultiPressed);
@@ -159,21 +160,28 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-#ifdef ARCH_ESP32
-        disablePin();
-#elif defined(USE_EINK)
+    #if defined(USE_EINK) && defined(PIN_EINK_EN)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
+    #endif
+    #if defined(GPS_POWER_TOGGLE)
+        if(config.position.gps_enabled)
+        {
+        DEBUG_MSG("Flag set to false for gps power\n");
+        } 
+        else 
+        {
+        DEBUG_MSG("Flag set to true to restore power\n");
+        }
+    config.position.gps_enabled = !(config.position.gps_enabled);
+    doGPSpowersave(config.position.gps_enabled);
+    #endif
     }
 
     static void userButtonMultiPressed()
     {
-#ifdef ARCH_ESP32
-        clearNVS();
-#endif
-#ifdef ARCH_NRF52
-        clearBonds();
-#endif
+        screen->print("Sent ad-hoc ping\n");
+        service.refreshMyNodeInfo();
+        service.sendNetworkPing(NODENUM_BROADCAST, true);
     }
 
     static void userButtonPressedLongStart()

src/FSCommon.cpp

@@ -1,6 +1,18 @@
 #include "configuration.h"
 #include "FSCommon.h"
 
+#ifdef HAS_SDCARD
+#include <SPI.h>
+#include <SD.h>
+
+
+#ifdef SDCARD_USE_SPI1  
+SPIClass SPI1(HSPI);
+#define SDHandler SPI1
+#endif
+
+
+#endif  //HAS_SDCARD
 
 bool copyFile(const char* from, const char* to)
 {
@@ -169,3 +181,39 @@ void fsInit()
     listDir("/", 10);
 #endif
 }
+
+
+void setupSDCard()
+{
+#ifdef HAS_SDCARD
+    SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
+
+    if (!SD.begin(SDCARD_CS, SDHandler)) {
+        DEBUG_MSG("No SD_MMC card detected\n");
+        return ;
+    }
+    uint8_t cardType = SD.cardType();
+    if (cardType == CARD_NONE) {
+        DEBUG_MSG("No SD_MMC card attached\n");
+        return ;
+    }
+    DEBUG_MSG("SD_MMC Card Type: ");
+    if (cardType == CARD_MMC) {
+        DEBUG_MSG("MMC\n");
+    } else if (cardType == CARD_SD) {
+        DEBUG_MSG("SDSC\n");
+    } else if (cardType == CARD_SDHC) {
+        DEBUG_MSG("SDHC\n");
+    } else {
+        DEBUG_MSG("UNKNOWN\n");
+    }
+
+    uint64_t cardSize = SD.cardSize() / (1024 * 1024);
+    DEBUG_MSG("SD Card Size: %lluMB\n", cardSize);
+    DEBUG_MSG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
+    DEBUG_MSG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
+#endif
+}
+
+
+

src/FSCommon.h

@@ -44,3 +44,4 @@ bool copyFile(const char* from, const char* to);
 bool renameFile(const char* pathFrom, const char* pathTo);
 void listDir(const char * dirname, uint8_t levels, boolean del);
 void rmDir(const char * dirname);
+void setupSDCard();

src/GPSStatus.h

@@ -20,32 +20,19 @@ class GPSStatus : public Status
     bool hasLock = false;     // default to false, until we complete our first read
     bool isConnected = false; // Do we have a GPS we are talking to
 
+    bool isPowerSaving = false; //Are we in power saving state
+
     Position p = Position_init_default;
 
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
-    // // proposed for deprecation
-    // GPSStatus(bool hasLock, bool isConnected, int32_t latitude, int32_t longitude, int32_t altitude, uint32_t dop,
-    //           uint32_t heading, uint32_t numSatellites)
-    //     : Status()
-    // {
-    //     this->hasLock = hasLock;
-    //     this->isConnected = isConnected;
-
-    //     this->p.latitude_i = latitude;
-    //     this->p.longitude_i = longitude;
-    //     this->p.altitude = altitude;
-    //     this->p.PDOP = dop;
-    //     this->p.ground_track = heading;
-    //     this->p.sats_in_view = numSatellites;
-    // }
-
     // preferred method
-    GPSStatus(bool hasLock, bool isConnected, const Position &pos) : Status()
+    GPSStatus(bool hasLock, bool isConnected, bool isPowerSaving, const Position &pos) : Status()
     {
         this->hasLock = hasLock;
         this->isConnected = isConnected;
+        this->isPowerSaving = isPowerSaving;
 
         // all-in-one struct copy
         this->p = pos;
@@ -60,6 +47,8 @@ class GPSStatus : public Status
 
     bool getIsConnected() const { return isConnected; }
 
+    bool getIsPowerSaving() const { return isPowerSaving;}
+
     int32_t getLatitude() const
     {
         if (config.position.fixed_position) {
@@ -110,7 +99,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
         DEBUG_MSG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
 #endif
-        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
+        return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected || newStatus->isPowerSaving !=isPowerSaving ||
                 newStatus->p.latitude_i != p.latitude_i || newStatus->p.longitude_i != p.longitude_i ||
                 newStatus->p.altitude != p.altitude || newStatus->p.altitude_hae != p.altitude_hae ||
                 newStatus->p.PDOP != p.PDOP || newStatus->p.ground_track != p.ground_track ||

src/Power.cpp

@@ -102,6 +102,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #define ADC_MULTIPLIER 2.0
 #endif
 
+#ifndef BATTERY_SENSE_SAMPLES
+#define BATTERY_SENSE_SAMPLES 30
+#endif
+
 #ifdef BATTERY_PIN
         // Override variant or default ADC_MULTIPLIER if we have the override pref
         float operativeAdcMultiplier = config.power.adc_multiplier_override > 0
@@ -112,16 +116,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-#ifdef BATTERY_SENSE_SAMPLES
 //Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic environment.
             uint32_t raw = 0;
-            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES;i++){
+            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES; i++){
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw/BATTERY_SENSE_SAMPLES;
-#else
-            uint32_t raw = analogRead(BATTERY_PIN);
-#endif
 
             float scaled;
 #ifndef VBAT_RAW_TO_SCALED
@@ -182,6 +182,9 @@ Power::Power() : OSThread("Power")
 {
     statusHandler = {};
     low_voltage_counter = 0;
+#ifdef DEBUG_HEAP
+    lastheap = ESP.getFreeHeap();
+#endif
 }
 
 bool Power::analogInit()
@@ -233,11 +236,14 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-
+    screen->setOn(false);
+#if defined(USE_EINK) && defined(PIN_EINK_EN)
+    digitalWrite(PIN_EINK_EN, LOW); //power off backlight first
+#endif
 
 #ifdef HAS_PMU
     DEBUG_MSG("Shutting down\n");
-    if(PMU){
+    if(PMU) {
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
         PMU->shutdown();
     }
@@ -280,6 +286,12 @@ void Power::readPowerStatus()
         DEBUG_MSG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
+#ifdef DEBUG_HEAP
+        if (lastheap != ESP.getFreeHeap()){
+            DEBUG_MSG("Heap status: %d/%d bytes free (%d), running %d threads\n", ESP.getFreeHeap(), ESP.getHeapSize(), ESP.getFreeHeap() - lastheap , concurrency::mainController.size(false));
+            lastheap = ESP.getFreeHeap();
+        }
+#endif
 
 // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
 // Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
@@ -287,8 +299,12 @@ void Power::readPowerStatus()
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
-                if (low_voltage_counter > 3)
-                    powerFSM.trigger(EVENT_LOW_BATTERY);
+                DEBUG_MSG("Warning RAK4631 Low voltage counter: %d/10\n", low_voltage_counter);
+                if (low_voltage_counter > 10) {
+                    // We can't trigger deep sleep on NRF52, it's freezing the board
+                    //powerFSM.trigger(EVENT_LOW_BATTERY);
+                    DEBUG_MSG("Low voltage detected, but not triggering deep sleep\n");
+                }
             } else {
                 low_voltage_counter = 0;
             }
@@ -312,7 +328,7 @@ int32_t Power::runOnce()
 #ifdef HAS_PMU
     // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
     // the IRQ status by reading the registers over I2C
-    if(PMU){
+    if(PMU) {
 
         PMU->getIrqStatus();
 
@@ -341,10 +357,11 @@ int32_t Power::runOnce()
         if (PMU->isBatRemoveIrq()) {
             DEBUG_MSG("Battery removed\n");
         }
-        if (PMU->isPekeyShortPressIrq()) {
-            DEBUG_MSG("PEK short button press\n");
-        }
         */
+        if (PMU->isPekeyLongPressIrq()) {
+            DEBUG_MSG("PEK long button press\n");
+            screen->setOn(false);
+        }
 
         PMU->clearIrqStatus();
     }
@@ -451,7 +468,9 @@ bool Power::axpChipInit()
         // Set constant current charging current
         PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
 
-    
+        //Set up the charging voltage
+        PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
+
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
         // t-beam s3 core 
@@ -504,6 +523,8 @@ bool Power::axpChipInit()
         //Set the constant current charging current of AXP2101, temporarily use 500mA by default
         PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
 
+        //Set up the charging voltage
+        PMU->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
     }
     
 
@@ -556,14 +577,15 @@ bool Power::axpChipInit()
     }
     DEBUG_MSG("=======================================================================\n");
 
-
-    //Set up the charging voltage, AXP2101/AXP192 4.2V gear is the same
-    // XPOWERS_AXP192_CHG_VOL_4V2 = XPOWERS_AXP2101_CHG_VOL_4V2
-    PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
-
+// We can safely ignore this approach for most (or all) boards because MCU turned off
+// earlier than battery discharged to 2.6V.
+//
+// Unfortanly for now we can't use this killswitch for RAK4630-based boards because they have a bug with
+// battery voltage measurement. Probably it sometimes drops to low values.
+#ifndef RAK4630
     // Set PMU shutdown voltage at 2.6V to maximize battery utilization
     PMU->setSysPowerDownVoltage(2600);
-
+#endif
 
 
 #ifdef PMU_IRQ

src/PowerFSM.cpp

@@ -34,7 +34,7 @@ static void sdsEnter()
 {
     DEBUG_MSG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(config.power.sds_secs * 1000);
+    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
 }
 
 extern Power *power;
@@ -324,31 +324,24 @@ void PowerFSM_setup()
 
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
-    // each time we get a new update packet make sure we are staying in the ON state so the screen stays awake (also we don't
-    // shutdown bluetooth if is_router)
-    powerFSM.add_transition(&stateDARK, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
-
     powerFSM.add_timed_transition(&stateON, &stateDARK, getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL, "Screen-on timeout");
 
+#ifdef ARCH_ESP32
     // On most boards we use light-sleep to be our main state, but on NRF52 we just stay in DARK
     State *lowPowerState = &stateLS;
 
-#ifdef ARCH_ESP32
     // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
-    // See: https://github.com/meshtastic/Meshtastic-device/issues/1071
+    // See: https://github.com/meshtastic/firmware/issues/1071
     if (isRouter || config.power.is_power_saving) {
         powerFSM.add_timed_transition(&stateNB, &stateLS, getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout");
         powerFSM.add_timed_transition(&stateDARK, &stateLS, getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL, "Bluetooth timeout");
-    } 
-
-#elif defined (ARCH_NRF52)
-    lowPowerState = &stateDARK;
-#endif
+    }
 
     if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, config.power.sds_secs * 1000, NULL, "mesh timeout");
+        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL, "mesh timeout");
+#endif
+
 
     powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/PowerFSMThread.h

@@ -26,11 +26,9 @@ class PowerFSMThread : public OSThread
 
         if (powerStatus->getHasUSB()) {
             timeLastPowered = millis();
-        } else if (config.power.on_battery_shutdown_after_secs > 0 &&
-                   millis() >
-                       timeLastPowered +
-                           (1000 *
-                            config.power.on_battery_shutdown_after_secs)) { // shutdown after 30 minutes unpowered
+        } else if (config.power.on_battery_shutdown_after_secs > 0 && 
+            config.power.on_battery_shutdown_after_secs != UINT32_MAX && 
+            millis() > (timeLastPowered + getConfiguredOrDefaultMs(config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 

src/RedirectablePrint.cpp

@@ -44,10 +44,15 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
     static char printBuf[160];
 
     va_copy(copy, arg);
-    int len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
+    size_t len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
     va_end(copy);
 
-    if (len < 0) return 0;
+    // If the resulting string is longer than sizeof(printBuf)-1 characters, the remaining characters are still counted for the return value
+
+    if (len > sizeof(printBuf) - 1) {
+        len = sizeof(printBuf) - 1;
+        printBuf[sizeof(printBuf) - 2] = '\n';
+    }
 
     len = Print::write(printBuf, len);
     return len;
@@ -103,4 +108,4 @@ size_t RedirectablePrint::logDebug(const char *format, ...)
     }
 
     return r;
-}
+}

src/airtime.cpp

@@ -117,6 +117,20 @@ float AirTime::utilizationTXPercent()
     return (float(sum) / float(MS_IN_HOUR)) * 100;
 }
 
+// Get the amount of minutes we have to be silent before we can send again
+uint8_t AirTime::getSilentMinutes(float txPercent, float dutyCycle) 
+{  
+  float newTxPercent = txPercent;
+  for (int8_t i = MINUTES_IN_HOUR-1; i >= 0; --i) {
+      newTxPercent -= ((float)this->utilizationTX[i] / (MS_IN_MINUTE * MINUTES_IN_HOUR / 100));
+      if (newTxPercent < dutyCycle) 
+          return MINUTES_IN_HOUR-1-i;
+  }
+
+  return MINUTES_IN_HOUR;
+}
+
+
 AirTime::AirTime() : concurrency::OSThread("AirTime"),airtimes({}) {
 }
 

src/airtime.h

@@ -29,6 +29,7 @@
 #define PERIODS_TO_LOG 8
 #define MINUTES_IN_HOUR 60
 #define SECONDS_IN_MINUTE 60
+#define MS_IN_MINUTE (SECONDS_IN_MINUTE * 1000)
 #define MS_IN_HOUR (MINUTES_IN_HOUR * SECONDS_IN_MINUTE * 1000)
 
 
@@ -57,6 +58,7 @@ class AirTime : private concurrency::OSThread
     uint32_t getSecondsPerPeriod();
     uint32_t getSecondsSinceBoot();
     uint32_t *airtimeReport(reportTypes reportType);
+    uint8_t getSilentMinutes(float txPercent, float dutyCycle);
 
   private:
     bool firstTime = true;

src/buzz/buzz.cpp

@@ -1,22 +1,14 @@
 #include "buzz.h"
 #include "configuration.h"
+#include "NodeDB.h"
 
-#ifndef PIN_BUZZER
-
-// Noop methods for boards w/o buzzer
-void playBeep(){};
-void playStartMelody(){};
-void playShutdownMelody(){};
-
-#else
-#ifdef M5STACK
-#include "Speaker.h"
-TONE Tone;
-#else
+#if !defined(ARCH_ESP32) && !defined(ARCH_RP2040) && !defined(ARCH_PORTDUINO)
 #include "Tone.h"
 #endif
 
+#if !defined(ARCH_PORTDUINO)
 extern "C" void delay(uint32_t dwMs);
+#endif
 
 struct ToneDuration {
   int frequency_khz;
@@ -42,28 +34,25 @@ const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
 
 void playTones(const ToneDuration *tone_durations, int size) {
-  for (int i = 0; i < size; i++) {
-    const auto &tone_duration = tone_durations[i];
-#ifdef M5STACK
-    Tone.tone(tone_duration.frequency_khz);
-    delay(tone_duration.duration_ms);
-    Tone.mute();
-#else
-    tone(PIN_BUZZER, tone_duration.frequency_khz, tone_duration.duration_ms);
+#ifdef PIN_BUZZER
+  if (!config.device.buzzer_gpio)
+    config.device.buzzer_gpio = PIN_BUZZER;
 #endif
-    // to distinguish the notes, set a minimum time between them.
-    delay(1.3 * tone_duration.duration_ms);
+  if (config.device.buzzer_gpio) {
+    for (int i = 0; i < size; i++) {
+      const auto &tone_duration = tone_durations[i];
+      tone(config.device.buzzer_gpio, tone_duration.frequency_khz, tone_duration.duration_ms);
+      // to distinguish the notes, set a minimum time between them.
+      delay(1.3 * tone_duration.duration_ms);
+    }
   }
 }
 
-#ifdef M5STACK
+
 void playBeep() {
   ToneDuration melody[] = {{NOTE_B3, DURATION_1_4}};
   playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
-#else
-void playBeep() { tone(PIN_BUZZER, NOTE_B3, DURATION_1_4); }
-#endif
 
 void playStartMelody() {
   ToneDuration melody[] = {{NOTE_FS3, DURATION_1_8},
@@ -72,11 +61,9 @@ void playStartMelody() {
   playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
-
 void playShutdownMelody() {
   ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8},
                            {NOTE_AS3, DURATION_1_8},
                            {NOTE_FS3, DURATION_1_4}};
   playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
-#endif

src/configuration.h

@@ -110,6 +110,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA_ADDR_ALTERNATE 0x41
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
+#define QMC5883L_ADDR 0x1E
+#define SHTC3_ADDR 0x70
+#define LPS22HB_ADDR 0x5C
+#define LPS22HB_ADDR_ALT 0x5D
+
+// -----------------------------------------------------------------------------
+// Security
+// -----------------------------------------------------------------------------
+
+#define ATECC608B_ADDR 0x35
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
@@ -132,6 +143,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_WIFI
     #define HAS_WIFI 0
 #endif
+#ifndef HAS_ETHERNET
+    #define HAS_ETHERNET 0
+#endif
 #ifndef HAS_SCREEN
     #define HAS_SCREEN 0
 #endif
@@ -153,6 +167,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_RTC
     #define HAS_RTC 0
 #endif
+#ifndef HAS_CPU_SHUTDOWN
+    #define HAS_CPU_SHUTDOWN 0
+#endif
+#ifndef HAS_BLUETOOTH
+    #define HAS_BLUETOOTH 0
+#endif
 
 #include "RF95Configuration.h"
 #include "DebugConfiguration.h"

src/detect/i2cScan.h

@@ -9,6 +9,41 @@
 #endif
 
 #if HAS_WIRE
+
+void printATECCInfo()
+{
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+    atecc.readConfigZone(false);
+
+    DEBUG_MSG("ATECC608B Serial Number: ");
+    for (int i = 0 ; i < 9 ; i++) {
+        DEBUG_MSG("%02x",atecc.serialNumber[i]);
+    }
+
+    DEBUG_MSG(", Rev Number: ");
+    for (int i = 0 ; i < 4 ; i++) {
+        DEBUG_MSG("%02x",atecc.revisionNumber[i]);
+    }
+    DEBUG_MSG("\n");
+
+    DEBUG_MSG("ATECC608B Config %s",atecc.configLockStatus ? "Locked" : "Unlocked");
+    DEBUG_MSG(", Data %s",atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
+    DEBUG_MSG(", Slot 0 %s\n",atecc.slot0LockStatus ? "Locked" : "Unlocked");
+
+    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
+        if (atecc.generatePublicKey() == false) {
+            DEBUG_MSG("ATECC608B Error generating public key\n");
+        } else {
+            DEBUG_MSG("ATECC608B Public Key: ");
+            for (int i = 0 ; i < 64 ; i++) {
+                DEBUG_MSG("%02x",atecc.publicKey64Bytes[i]);
+            }
+            DEBUG_MSG("\n");
+        }
+    }
+#endif
+}
+
 uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length) {
     uint16_t value = 0x00;
     Wire.beginTransmission(address);
@@ -55,7 +90,7 @@ uint8_t oled_probe(byte addr)
     return o_probe;
 }
 
-void scanI2Cdevice(void)
+void scanI2Cdevice()
 {
     byte err, addr;
     uint16_t registerValue = 0x00;
@@ -71,14 +106,25 @@ void scanI2Cdevice(void)
             if (addr == SSD1306_ADDRESS) {
                 screen_found = addr;
                 screen_model = oled_probe(addr);
-                if (screen_model == 1){
+                if (screen_model == 1) {
                     DEBUG_MSG("ssd1306 display found\n");
-                } else if (screen_model == 2){
+                } else if (screen_model == 2) {
                     DEBUG_MSG("sh1106 display found\n");
                 } else {
                     DEBUG_MSG("unknown display found\n");
                 }
             }
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+            if (addr == ATECC608B_ADDR) {
+                keystore_found = addr;
+                if (atecc.begin(keystore_found) == true) {
+                    DEBUG_MSG("ATECC608B initialized\n");
+                } else {
+                    DEBUG_MSG("ATECC608B initialization failed\n");
+                }
+                printATECCInfo();
+            }
+#endif
 #ifdef RV3028_RTC
             if (addr == RV3028_RTC){
                 rtc_found = addr;
@@ -117,42 +163,56 @@ void scanI2Cdevice(void)
                 DEBUG_MSG("axp192/axp2101 PMU found\n");
             }
 #endif
-        if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {
-            registerValue = getRegisterValue(addr, 0xD0, 1); // GET_ID
-            if (registerValue == 0x61) {
-                DEBUG_MSG("BME-680 sensor found at address 0x%x\n", (uint8_t)addr);
-                nodeTelemetrySensorsMap[TelemetrySensorType_BME680] = addr;
-            } else if (registerValue == 0x60) {
-                DEBUG_MSG("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                nodeTelemetrySensorsMap[TelemetrySensorType_BME280] = addr;
-            } else {
-                DEBUG_MSG("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
-                nodeTelemetrySensorsMap[TelemetrySensorType_BMP280] = addr;
+            if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {
+                registerValue = getRegisterValue(addr, 0xD0, 1); // GET_ID
+                if (registerValue == 0x61) {
+                    DEBUG_MSG("BME-680 sensor found at address 0x%x\n", (uint8_t)addr);
+                    nodeTelemetrySensorsMap[TelemetrySensorType_BME680] = addr;
+                } else if (registerValue == 0x60) {
+                    DEBUG_MSG("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
+                    nodeTelemetrySensorsMap[TelemetrySensorType_BME280] = addr;
+                } else {
+                    DEBUG_MSG("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
+                    nodeTelemetrySensorsMap[TelemetrySensorType_BMP280] = addr;
+                }
             }
-        }
-        if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {
-            registerValue = getRegisterValue(addr, 0xFE, 2);
-            DEBUG_MSG("Register MFG_UID: 0x%x\n", registerValue);
-            if (registerValue == 0x5449) {
-                DEBUG_MSG("INA260 sensor found at address 0x%x\n", (uint8_t)addr);
-                nodeTelemetrySensorsMap[TelemetrySensorType_INA260] = addr;
-            } else { // Assume INA219 if INA260 ID is not found
-                DEBUG_MSG("INA219 sensor found at address 0x%x\n", (uint8_t)addr);
-                nodeTelemetrySensorsMap[TelemetrySensorType_INA219] = addr;
+            if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {
+                registerValue = getRegisterValue(addr, 0xFE, 2);
+                DEBUG_MSG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    DEBUG_MSG("INA260 sensor found at address 0x%x\n", (uint8_t)addr);
+                    nodeTelemetrySensorsMap[TelemetrySensorType_INA260] = addr;
+                } else { // Assume INA219 if INA260 ID is not found
+                    DEBUG_MSG("INA219 sensor found at address 0x%x\n", (uint8_t)addr);
+                    nodeTelemetrySensorsMap[TelemetrySensorType_INA219] = addr;
+                }
+            }
+            if (addr == MCP9808_ADDR) {
+                nodeTelemetrySensorsMap[TelemetrySensorType_MCP9808] = addr;
+                DEBUG_MSG("MCP9808 sensor found\n");
+            }
+            if (addr == SHTC3_ADDR) {
+                DEBUG_MSG("SHTC3 sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_SHTC3] = addr;
+            }
+            if (addr == LPS22HB_ADDR || addr == LPS22HB_ADDR_ALT) {
+                DEBUG_MSG("LPS22HB sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_LPS22] = addr;
+            }
+
+            // High rate sensors, will be processed internally
+            if (addr == QMC6310_ADDR) {
+                DEBUG_MSG("QMC6310 Highrate 3-Axis magnetic sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_QMC6310] = addr;
+            }
+            if (addr == QMI8658_ADDR) {
+                DEBUG_MSG("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658] = addr;
+            }
+            if (addr == QMC5883L_ADDR) {
+                DEBUG_MSG("QMC5883L Highrate 3-Axis magnetic sensor found\n");
+                nodeTelemetrySensorsMap[TelemetrySensorType_QMC5883L] = addr;
             }
-        }
-        if (addr == MCP9808_ADDR) {
-            nodeTelemetrySensorsMap[TelemetrySensorType_MCP9808] = addr;
-            DEBUG_MSG("MCP9808 sensor found at address 0x%x\n", (uint8_t)addr);
-        }
-        if(addr == QMC6310_ADDR){
-            DEBUG_MSG("QMC6310 3-Axis magnetic sensor found at address 0x%x\n", (uint8_t)addr);
-            nodeTelemetrySensorsMap[TelemetrySensorType_QMC6310] = addr;
-        }
-        if(addr == QMI8658_ADDR){
-            DEBUG_MSG("QMI8658 6-Axis inertial measurement sensor found at address 0x%x\n", (uint8_t)addr);
-            nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658] = addr;
-        }
         } else if (err == 4) {
             DEBUG_MSG("Unknow error at address 0x%x\n", addr);
         }
@@ -164,5 +224,5 @@ void scanI2Cdevice(void)
         DEBUG_MSG("%i I2C devices found\n",nDevices);
 }
 #else
-void scanI2Cdevice(void) {}
+void scanI2Cdevice() {}
 #endif

src/gps/GPS.cpp

@@ -150,9 +150,21 @@ bool GPS::setupGPS()
     _serial_gps->setRxBufferSize(2048); // the default is 256
 #endif
 
+// if the overrides are not dialled in, set them from the board definitions, if they exist
+
+#if defined(GPS_RX_PIN)
+if (!config.position.rx_gpio)
+    config.position.rx_gpio = GPS_RX_PIN;
+#endif
+#if defined(GPS_TX_PIN)
+if (!config.position.tx_gpio)
+    config.position.tx_gpio = GPS_TX_PIN;
+#endif
+
 // ESP32 has a special set of parameters vs other arduino ports
-#if defined(GPS_RX_PIN) && defined(ARCH_ESP32)
-        _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
+#if defined(ARCH_ESP32)
+        if(config.position.rx_gpio)
+            _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, config.position.rx_gpio, config.position.tx_gpio);
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -258,21 +270,30 @@ bool GPS::setup()
     pinMode(PIN_GPS_EN, OUTPUT);
 #endif
 
+#ifdef HAS_PMU
+if(config.position.gps_enabled){
+    setGPSPower(true);
+}
+#endif
+
 #ifdef PIN_GPS_RESET
     digitalWrite(PIN_GPS_RESET, 1); // assert for 10ms
     pinMode(PIN_GPS_RESET, OUTPUT);
     delay(10);
     digitalWrite(PIN_GPS_RESET, 0);
 #endif
-
     setAwake(true); // Wake GPS power before doing any init
     bool ok = setupGPS();
 
     if (ok) {
         notifySleepObserver.observe(&notifySleep);
         notifyDeepSleepObserver.observe(&notifyDeepSleep);
+        notifyGPSSleepObserver.observe(&notifyGPSSleep);
+    }
+    if (config.position.gps_enabled==false) {
+        setAwake(false);
+        doGPSpowersave(false);
     }
-
     return ok;
 }
 
@@ -281,6 +302,7 @@ GPS::~GPS()
     // we really should unregister our sleep observer
     notifySleepObserver.unobserve(&notifySleep);
     notifyDeepSleepObserver.unobserve(&notifyDeepSleep);
+    notifyGPSSleepObserver.observe(&notifyGPSSleep);
 }
 
 bool GPS::hasLock()
@@ -393,7 +415,7 @@ void GPS::publishUpdate()
         DEBUG_MSG("publishing pos@%x:2, hasVal=%d, GPSlock=%d\n", p.timestamp, hasValidLocation, hasLock());
 
         // Notify any status instances that are observing us
-        const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), p);
+        const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), isPowerSaving(), p);
         newStatus.notifyObservers(&status);
     }
 }
@@ -404,7 +426,7 @@ int32_t GPS::runOnce()
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
-        if(gnssModel == GNSS_MODEL_UBLOX){
+        if((config.position.gps_enabled == 1) && (gnssModel == GNSS_MODEL_UBLOX)){
             // reset the GPS on next bootup
             if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
                 DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
@@ -506,6 +528,7 @@ int GPS::prepareDeepSleep(void *unused)
     DEBUG_MSG("GPS deep sleep!\n");
 
     // For deep sleep we also want abandon any lock attempts (because we want minimum power)
+    getSleepTime();
     setAwake(false);
 
     return 0;
@@ -641,6 +664,11 @@ GPS *createGps()
             return new_gps;
         }
     }
+    else{
+        GPS *new_gps = new NMEAGPS();
+        new_gps->setup();
+        return new_gps;
+    }
     return nullptr;
 #endif
 }

src/gps/GPS.h

@@ -49,6 +49,7 @@ class GPS : private concurrency::OSThread
 
     CallbackObserver<GPS, void *> notifySleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareSleep);
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
+    CallbackObserver<GPS, void *> notifyGPSSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
@@ -77,6 +78,8 @@ class GPS : private concurrency::OSThread
     /// Return true if we are connected to a GPS
     bool isConnected() const { return hasGPS; }
 
+    bool isPowerSaving() const { return !config.position.gps_enabled;}
+
     /**
      * Restart our lock attempt - try to get and broadcast a GPS reading ASAP
      * called after the CPU wakes from light-sleep state

src/gps/NMEAGPS.cpp

@@ -109,7 +109,7 @@ bool NMEAGPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     fixType = atoi(gsafixtype.value());  // will set to zero if no data
-    DEBUG_MSG("FIX QUAL=%d, TYPE=%d\n", fixQual, fixType);
+    // DEBUG_MSG("FIX QUAL=%d, TYPE=%d\n", fixQual, fixType);
 #endif
 
     // check if GPS has an acceptable lock
@@ -168,7 +168,7 @@ bool NMEAGPS::lookForLocation()
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     p.HDOP = reader.hdop.value();
     p.PDOP = TinyGPSPlus::parseDecimal(gsapdop.value());
-    DEBUG_MSG("PDOP=%d, HDOP=%d\n", dop, reader.hdop.value());
+    // DEBUG_MSG("PDOP=%d, HDOP=%d\n", p.PDOP, p.HDOP);
 #else
     // FIXME! naive PDOP emulation (assumes VDOP==HDOP)
     // correct formula is PDOP = SQRT(HDOP^2 + VDOP^2)

src/gps/NMEAWPL.cpp

@@ -0,0 +1,90 @@
+#include "NMEAWPL.h"
+#include "GeoCoord.h"
+
+/* -------------------------------------------
+ *        1       2 3        4 5    6
+ *        |       | |        | |    |
+ * $--WPL,llll.ll,a,yyyyy.yy,a,c--c*hh<CR><LF>
+ *
+ * Field Number:
+ * 1 Latitude
+ * 2 N or S (North or South)
+ * 3 Longitude
+ * 4 E or W (East or West)
+ * 5 Waypoint name
+ * 6 Checksum
+ * -------------------------------------------
+ */
+
+uint32_t printWPL(char *buf, const Position &pos, const char *name)
+{
+    GeoCoord geoCoord(pos.latitude_i,pos.longitude_i,pos.altitude);
+    uint32_t len = sprintf(buf, "$GNWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s",
+        geoCoord.getDMSLatDeg(),
+        (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6,
+        geoCoord.getDMSLatCP(),
+        geoCoord.getDMSLonDeg(),
+        (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
+        geoCoord.getDMSLonCP(),
+        name);
+    uint32_t chk = 0;
+    for (uint32_t i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += sprintf(buf + len, "*%02X\r\n", chk);
+    return len;
+}
+
+/* -------------------------------------------
+ *        1         2       3 4       5 6 7  8   9  10 11 12 13  14   15
+ *        |         |       | |       | | |  |   |   | |   | |   |    |
+ * $--GGA,hhmmss.ss,ddmm.mm,a,ddmm.mm,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh<CR><LF>
+ *
+ * Field Number:
+ *  1 UTC of this position report, hh is hours, mm is minutes, ss.ss is seconds.
+ *  2 Latitude
+ *  3 N or S (North or South)
+ *  4 Longitude
+ *  5 E or W (East or West)
+ *  6 GPS Quality Indicator (non null)
+ *  7 Number of satellites in use, 00 - 12
+ *  8 Horizontal Dilution of precision (meters)
+ *  9 Antenna Altitude above/below mean-sea-level (geoid) (in meters)
+ * 10 Units of antenna altitude, meters
+ * 11 Geoidal separation, the difference between the WGS-84 earth ellipsoid and mean-sea-level (geoid), "-" means mean-sea-level below ellipsoid
+ * 12 Units of geoidal separation, meters
+ * 13 Age of differential GPS data, time in seconds since last SC104 type 1 or 9 update, null field when DGPS is not used
+ * 14 Differential reference station ID, 0000-1023
+ * 15 Checksum
+ * -------------------------------------------
+ */
+
+uint32_t printGGA(char *buf, const Position &pos)
+{
+    GeoCoord geoCoord(pos.latitude_i,pos.longitude_i,pos.altitude);
+    uint32_t len = sprintf(buf, "$GNGGA,%06u.%03u,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d",
+        pos.time / 1000,
+        pos.time % 1000,
+        geoCoord.getDMSLatDeg(),
+        (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6,
+        geoCoord.getDMSLatCP(),
+        geoCoord.getDMSLonDeg(),
+        (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6,
+        geoCoord.getDMSLonCP(),
+        pos.fix_type,
+        pos.sats_in_view,
+        pos.HDOP,
+        geoCoord.getAltitude(),
+        'M',
+        pos.altitude_geoidal_separation,
+        'M',
+        0,
+        0);
+
+    uint32_t chk = 0;
+    for (uint32_t i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += sprintf(buf + len, "*%02X\r\n", chk);
+    return len;
+}

src/gps/NMEAWPL.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#include <Arduino.h>
+#include "main.h"
+
+uint32_t printWPL(char *buf, const Position &pos, const char *name);
+uint32_t printGGA(char *buf, const Position &pos);

src/gps/RTC.cpp

@@ -44,7 +44,11 @@ void readFromRTC()
     if(rtc_found == PCF8563_RTC) {
         uint32_t now = millis();
         PCF8563_Class rtc;
+#ifdef RTC_USE_WIRE1
+        rtc.begin(Wire1);
+#else
         rtc.begin();
+#endif
         auto tc = rtc.getDateTime();
         tm t;
         t.tm_year = tc.year - 1900;
@@ -110,7 +114,11 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #elif defined(PCF8563_RTC)
         if(rtc_found == PCF8563_RTC) {
             PCF8563_Class rtc;
-            rtc.begin();
+#ifdef RTC_USE_WIRE1
+        rtc.begin(Wire1);
+#else
+        rtc.begin();
+#endif
             tm *t = localtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             DEBUG_MSG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);

src/gps/RTC.h

@@ -16,7 +16,7 @@ enum RTCQuality {
     RTCQualityFromNet = 2,
 
     /// Our time is based on NTP
-    RTCQualityNTP= 3,
+    RTCQualityNTP = 3,
 
     /// Our time is based on our own GPS
     RTCQualityGPS = 4

src/graphics/EInkDisplay2.cpp

@@ -14,8 +14,8 @@
 #define TECHO_DISPLAY_MODEL GxEPD2_154_D67
 #elif defined(RAK4630)
 
-//GxEPD2_213_B74 - RAK14000 2.13 inch b/w 250x128 
-#define TECHO_DISPLAY_MODEL GxEPD2_213_B74
+//GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122 - changed from GxEPD2_213_B74 - which was not going to give partial update support
+#define TECHO_DISPLAY_MODEL GxEPD2_213_BN
 
 //4.2 inch 300x400 - GxEPD2_420_M01
 //#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
@@ -46,9 +46,9 @@ EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl)
     setGeometry(GEOMETRY_RAWMODE, TECHO_DISPLAY_MODEL::WIDTH, TECHO_DISPLAY_MODEL::HEIGHT);
     #elif defined(RAK4630)
     
-    //GxEPD2_213_B74 - RAK14000 2.13 inch b/w 250x128 
+    //GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122 
     setGeometry(GEOMETRY_RAWMODE, 250, 122);
-    
+
     //GxEPD2_420_M01
     //setGeometry(GEOMETRY_RAWMODE, 300, 400);
 
@@ -110,14 +110,17 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
         adafruitDisplay->display(false); // FIXME, use partial update mode
         #elif defined(RAK4630)
         
-        //RAK14000 2.13 inch b/w 250x122 does not support partial updates
-        adafruitDisplay->display(false); // FIXME, use partial update mode
+        //RAK14000 2.13 inch b/w 250x122 actually now does support partial updates
+        
+        //Full update mode (slow)
+        //adafruitDisplay->display(false); // FIXME, use partial update mode
         
         //Only enable for e-Paper with support for partial updates and comment out above adafruitDisplay->display(false); 
         // 1.54 inch 200x200 - GxEPD2_154_M09
+        // 2.13 inch 250x122 - GxEPD2_213_BN
         // 2.9 inch 296x128 - GxEPD2_290_T5D
         // 4.2 inch 300x400 - GxEPD2_420_M01
-        //adafruitDisplay->nextPage();
+        adafruitDisplay->nextPage();
         
         #elif defined(PCA10059) || defined(M5_COREINK)
         adafruitDisplay->nextPage();
@@ -190,11 +193,11 @@ bool EInkDisplay::connect()
         
         adafruitDisplay->init(115200, true, 10, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
 
-        //RAK14000 2.13 inch b/w 250x122 does not support partial updates 
+        //RAK14000 2.13 inch b/w 250x122 does actually now support partial updates 
         adafruitDisplay->setRotation(3);
-        //For 1.54, 2.9 and 4.2
+        //Partial update support for  1.54, 2.13 RAK14000 b/w , 2.9 and 4.2
         //adafruitDisplay->setRotation(1);
-        //adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     } else {
         (void)adafruitDisplay;
     }      

src/graphics/Screen.cpp

@@ -35,6 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "mesh/Channels.h"
 #include "mesh/generated/deviceonly.pb.h"
 #include "modules/TextMessageModule.h"
+
 #include "sleep.h"
 #include "target_specific.h"
 #include "utils.h"
@@ -42,6 +43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #include "mesh/http/WiFiAPClient.h"
+#include "modules/esp32/StoreForwardModule.h"
 #endif
 
 #ifdef OLED_RU
@@ -50,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 using namespace meshtastic; /** @todo remove */
 
-extern bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct);
-
 namespace graphics
 {
 
@@ -67,6 +67,8 @@ namespace graphics
 static FrameCallback normalFrames[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 static uint32_t targetFramerate = IDLE_FRAMERATE;
 static char btPIN[16] = "888888";
+
+uint32_t logo_timeout = 5000; // 4 seconds for EACH logo
     
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
@@ -84,10 +86,6 @@ static char ourId[5];
 // GeoCoord object for the screen
 GeoCoord geoCoord;
 
-// OEM Config File
-static const char *oemConfigFile = "/oem/oem.proto";
-OEMStore oemStore;
-
 #ifdef SHOW_REDRAWS
 static bool heartbeat = false;
 #endif
@@ -99,17 +97,17 @@ static uint16_t displayWidth, displayHeight;
 
 #if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
 // The screen is bigger so use bigger fonts
-#define FONT_SMALL ArialMT_Plain_16
-#define FONT_MEDIUM ArialMT_Plain_24
-#define FONT_LARGE ArialMT_Plain_24
+#define FONT_SMALL ArialMT_Plain_16 // Height: 19
+#define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
+#define FONT_LARGE ArialMT_Plain_24 // Height: 28
 #else
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
-#define FONT_SMALL ArialMT_Plain_10
+#define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
-#define FONT_MEDIUM ArialMT_Plain_16
-#define FONT_LARGE ArialMT_Plain_24
+#define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
+#define FONT_LARGE ArialMT_Plain_24 // Height: 28
 #endif
 
 #define fontHeight(font) ((font)[1] + 1) // height is position 1
@@ -287,27 +285,27 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 
 static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    int x_offset = display->width() / 2;
+    int y_offset = display->height() == 64 ? 0 : 32;
     display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setFont(FONT_MEDIUM);
-    display->drawString(64 + x, y, "Bluetooth");
+    display->drawString(x_offset + x, y_offset + y, "Bluetooth");
 
     display->setFont(FONT_SMALL);
-    display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Enter this code");
+    y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM -4   : y_offset + FONT_HEIGHT_MEDIUM + 5;
+    display->drawString(x_offset + x, y_offset + y, "Enter this code");
 
     display->setFont(FONT_LARGE);
+    String displayPin(btPIN);
+    String pin = displayPin.substring(0, 3) + " " + displayPin.substring(3, 6);
+    y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_SMALL - 5 : y_offset + FONT_HEIGHT_SMALL + 5;
+    display->drawString(x_offset + x, y_offset + y, pin);
 
-    auto displayPin = new String(btPIN);
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-    display->drawString(12 + x, 26 + y, displayPin->substring(0, 3));
-    display->drawString(72 + x, 26 + y, displayPin->substring(3, 6));
-    
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setFont(FONT_SMALL);
-    char buf[30];
-    const char *name = "Name: ";
-    strcpy(buf, name);
-    strcat(buf, getDeviceName());
-    display->drawString(64 + x, 48 + y, buf);
+    String deviceName =  "Name: ";
+    deviceName.concat(getDeviceName());
+    y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_LARGE - 6 : y_offset + FONT_HEIGHT_LARGE + 5;
+    display->drawString(x_offset + x, y_offset + y, deviceName);
 }
 
 static void drawFrameShutdown(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
@@ -333,11 +331,8 @@ static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, i
     display->drawString(64 + x, y, "Updating");
 
     display->setFont(FONT_SMALL);
-    if ((millis() / 1000) % 2) {
-        display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Please wait . . .");
-    } else {
-        display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Please wait . .  ");
-    }
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->drawStringMaxWidth(0 + x, 2 + y + FONT_HEIGHT_SMALL *2, x + display->getWidth(), "Please be patient and do not power off.");
 }
 
 /// Draw the last text message we received
@@ -368,6 +363,9 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
 {
     displayedNodeNum = 0; // Not currently showing a node pane
 
+    // the max length of this buffer is much longer than we can possibly print
+    static char tempBuf[237];
+
     MeshPacket &mp = devicestate.rx_text_message;
     NodeInfo *node = nodeDB.getNode(getFrom(&mp));
     // DEBUG_MSG("drawing text message from 0x%x: %s\n", mp.from,
@@ -377,16 +375,14 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     // with the third parameter you can define the width after which words will
     // be wrapped. Currently only spaces and "-" are allowed for wrapping
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-    display->setFont(FONT_MEDIUM);
-    String sender = (node && node->has_user) ? node->user.short_name : "???";
-    display->drawString(0 + x, 0 + y, sender);
     display->setFont(FONT_SMALL);
-
-    // the max length of this buffer is much longer than we can possibly print
-    static char tempBuf[96];
-    snprintf(tempBuf, sizeof(tempBuf), "         %s", mp.decoded.payload.bytes);
-
-    display->drawStringMaxWidth(4 + x, 10 + y, SCREEN_WIDTH - (6 + x), tempBuf);
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+    display->drawStringf(0 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+    display->drawStringf(1 + x, 0 + y, tempBuf, "From: %s", (node && node->has_user) ? node->user.short_name : "???");
+    display->setColor(WHITE);
+    snprintf(tempBuf, sizeof(tempBuf), "%s", mp.decoded.payload.bytes);
+    display->drawStringMaxWidth(0 + x, 0 + y + FONT_HEIGHT_SMALL, x + display->getWidth(), tempBuf);
 }
 
 /// Draw a series of fields in a column, wrapping to multiple colums if needed
@@ -399,6 +395,10 @@ static void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char *
     int xo = x, yo = y;
     while (*f) {
         display->drawString(xo, yo, *f);
+        if (display->getColor() == BLACK)
+            display->drawString(xo + 1, yo, *f);
+
+        display->setColor(WHITE);
         yo += FONT_HEIGHT_SMALL;
         if (yo > SCREEN_HEIGHT - FONT_HEIGHT_SMALL) {
             xo += SCREEN_WIDTH / 2;
@@ -467,8 +467,13 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, NodeStatus *no
 {
     char usersString[20];
     sprintf(usersString, "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+    display->drawFastImage(x, y + 3, 8, 8, imgUser);
+#else
     display->drawFastImage(x, y, 8, 8, imgUser);
+#endif
     display->drawString(x + 10, y - 2, usersString);
+    display->drawString(x + 11, y - 2, usersString);
 }
 
 // Draw GPS status summary
@@ -477,15 +482,18 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
     if (config.position.fixed_position) {
         // GPS coordinates are currently fixed
         display->drawString(x - 1, y - 2, "Fixed GPS");
+        display->drawString(x, y - 2, "Fixed GPS");
         return;
     }
     if (!gps->getIsConnected()) {
         display->drawString(x, y - 2, "No GPS");
+        display->drawString(x + 1, y - 2, "No GPS");
         return;
     }
     display->drawFastImage(x, y, 6, 8, gps->getHasLock() ? imgPositionSolid : imgPositionEmpty);
     if (!gps->getHasLock()) {
         display->drawString(x + 8, y - 2, "No sats");
+        display->drawString(x + 9, y - 2, "No sats");
         return;
     } else {
         char satsString[3];
@@ -510,6 +518,23 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
     }
 }
 
+//Draw status when gps is disabled by PMU
+static void drawGPSpowerstat(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
+{
+#ifdef HAS_PMU    
+    String displayLine = "GPS disabled";
+    int16_t xPos = display->getStringWidth(displayLine);
+
+    if (!config.position.gps_enabled){
+        display->drawString(x + xPos, y, displayLine);
+#ifdef GPS_POWER_TOGGLE 
+        display->drawString(x + xPos, y - 2 + FONT_HEIGHT_SMALL, " by button");
+#endif
+        //display->drawString(x + xPos, y + 2, displayLine);
+    }
+#endif
+}
+
 static void drawGPSAltitude(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus *gps)
 {
     String displayLine = "";
@@ -542,9 +567,10 @@ static void drawGPScoordinates(OLEDDisplay *display, int16_t x, int16_t y, const
         display->drawString(x + (SCREEN_WIDTH - (display->getStringWidth(displayLine))) / 2, y, displayLine);
     } else {
 
+        geoCoord.updateCoords(int32_t(gps->getLatitude()), int32_t(gps->getLongitude()), int32_t(gps->getAltitude()));
+
         if (gpsFormat != Config_DisplayConfig_GpsCoordinateFormat_DMS) {
             char coordinateLine[22];
-            geoCoord.updateCoords(int32_t(gps->getLatitude()), int32_t(gps->getLongitude()), int32_t(gps->getAltitude()));
             if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_DEC) { // Decimal Degrees
                 sprintf(coordinateLine, "%f %f", geoCoord.getLatitude() * 1e-7, geoCoord.getLongitude() * 1e-7);
             } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_UTM) { // Universal Transverse Mercator
@@ -672,16 +698,16 @@ static uint16_t getCompassDiam(OLEDDisplay *display)
 {
     uint16_t diam = 0;
     // get the smaller of the 2 dimensions and subtract 20
-    if(display->getWidth() > display->getHeight()) {
-        diam = display->getHeight();
+    if(display->getWidth() > (display->getHeight() - FONT_HEIGHT_SMALL)) {
+        diam = display->getHeight() - FONT_HEIGHT_SMALL;
         // if 2/3 of the other size would be smaller, use that
         if (diam > (display->getWidth() * 2 / 3)) {
             diam = display->getWidth() * 2 / 3;
         }
     } else {
         diam = display->getWidth();
-        if (diam > (display->getHeight() * 2 / 3)) {
-            diam = display->getHeight() * 2 / 3;
+        if (diam > ((display->getHeight() - FONT_HEIGHT_SMALL) * 2 / 3)) {
+            diam = (display->getHeight() - FONT_HEIGHT_SMALL) * 2 / 3;
         }
     }
     
@@ -761,6 +787,8 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+
     const char *username = node->has_user ? node->user.long_name : "Unknown Name";
 
     static char signalStr[20];
@@ -791,7 +819,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     const char *fields[] = {username, distStr, signalStr, lastStr, NULL};
 
     // coordinates for the center of the compass/circle
-    int16_t compassX = x + SCREEN_WIDTH - getCompassDiam(display) / 2 - 5, compassY = y + SCREEN_HEIGHT / 2;
+    int16_t compassX = x + SCREEN_WIDTH - getCompassDiam(display) / 2 - 5, compassY = y + FONT_HEIGHT_SMALL + (SCREEN_HEIGHT - FONT_HEIGHT_SMALL) / 2;
     bool hasNodeHeading = false;
 
     if (ourNode && hasPosition(ourNode)) {
@@ -834,33 +862,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
         display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
     display->drawCircle(compassX, compassY, getCompassDiam(display) / 2);
 
+    display->setColor(BLACK);
     // Must be after distStr is populated
     drawColumns(display, x, y, fields);
 }
 
-#if 0
-void _screen_header()
-{
-    if (!disp)
-        return;
-
-    // Message count
-    //snprintf(buffer, sizeof(buffer), "#%03d", ttn_get_count() % 1000);
-    //display->setTextAlignment(TEXT_ALIGN_LEFT);
-    //display->drawString(0, 2, buffer);
-
-    // Datetime
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(display->getWidth()/2, 2, gps.getTimeStr());
-
-    // Satellite count
-    display->setTextAlignment(TEXT_ALIGN_RIGHT);
-    char buffer[10];
-    display->drawString(display->getWidth() - SATELLITE_IMAGE_WIDTH - 4, 2, itoa(gps.satellites.value(), buffer, 10));
-    display->drawXbm(display->getWidth() - SATELLITE_IMAGE_WIDTH, 0, SATELLITE_IMAGE_WIDTH, SATELLITE_IMAGE_HEIGHT, SATELLITE_IMAGE);
-}
-#endif
-
 // #ifdef RAK4630
 // Screen::Screen(uint8_t address, int sda, int scl) : OSThread("Screen"), cmdQueue(32), dispdev(address, sda, scl),
 // dispdev_oled(address, sda, scl), ui(&dispdev)
@@ -928,9 +934,6 @@ void Screen::setup()
     dispdev.setDetected(screen_model);
 #endif
 
-    // Load OEM config from Proto file if existent
-    loadProto(oemConfigFile, OEMStore_size, sizeof(oemConfigFile), OEMStore_fields, &oemStore);
-
     // Initialising the UI will init the display too.
     ui.init();
 
@@ -951,6 +954,9 @@ void Screen::setup()
     // Set the utf8 conversion function
     dispdev.setFontTableLookupFunction(customFontTableLookup);
 
+    if (strlen(oemStore.oem_text) > 0)
+        logo_timeout *= 2;
+
     // Add frames.
     static FrameCallback bootFrames[] = {drawBootScreen};
     static const int bootFrameCount = sizeof(bootFrames) / sizeof(bootFrames[0]);
@@ -1019,26 +1025,28 @@ int32_t Screen::runOnce()
         return RUN_SAME;
     }
 
-    // Show boot screen for first 5 seconds, then switch to normal operation.
+    // Show boot screen for first logo_timeout seconds, then switch to normal operation.
     // serialSinceMsec adjusts for additional serial wait time during nRF52 bootup
     static bool showingBootScreen = true;
-    if (showingBootScreen && (millis() > (5000 + serialSinceMsec))) {
+    if (showingBootScreen && (millis() > (logo_timeout + serialSinceMsec))) {
         DEBUG_MSG("Done with boot screen...\n");
         stopBootScreen();
         showingBootScreen = false;
     }
 
-    // If we have an OEM Boot screen, toggle after 2,5 seconds
+    // If we have an OEM Boot screen, toggle after logo_timeout seconds
     if (strlen(oemStore.oem_text) > 0) {
         static bool showingOEMBootScreen = true;
-        if (showingOEMBootScreen && (millis() > (2500 + serialSinceMsec))) {
+        if (showingOEMBootScreen && (millis() > ((logo_timeout / 2) + serialSinceMsec))) {
             DEBUG_MSG("Switch to OEM screen...\n");
             // Change frames.
             static FrameCallback bootOEMFrames[] = {drawOEMBootScreen};
             static const int bootOEMFrameCount = sizeof(bootOEMFrames) / sizeof(bootOEMFrames[0]);
             ui.setFrames(bootOEMFrames, bootOEMFrameCount);
             ui.update();
+#ifndef USE_EINK            
             ui.update();
+#endif
             showingOEMBootScreen = false;
         }
     }
@@ -1358,6 +1366,9 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
     char channelStr[20];
     {
         concurrency::LockGuard guard(&lock);
@@ -1367,18 +1378,54 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     // Display power status
     if (powerStatus->getHasBattery())
-        drawBattery(display, x, y + 2, imgBattery, powerStatus);
+        drawBattery(display, x + 1, y + 3, imgBattery, powerStatus);
     else if (powerStatus->knowsUSB())
-        display->drawFastImage(x, y + 2, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
+        display->drawFastImage(x + 1, y + 3, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
     // Display nodes status
-    drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 2, nodeStatus);
+    drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 3, nodeStatus);
     // Display GPS status
-    drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
+    if (!config.position.gps_enabled){
+        int16_t yPos = y + 2;
+#ifdef GPS_POWER_TOGGLE
+        yPos = (y + 10 + FONT_HEIGHT_SMALL);
+#endif
+        drawGPSpowerstat(display, x, yPos, gpsStatus);
+    } else {
+        drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
+        drawGPS(display, x + (SCREEN_WIDTH * 0.63), y + 3, gpsStatus);
+    }
 
+    display->setColor(WHITE);
     // Draw the channel name
     display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
-    // Draw our hardware ID to assist with bluetooth pairing
-    display->drawFastImage(x + SCREEN_WIDTH - (10) - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgInfo);
+    // Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
+    if (moduleConfig.store_forward.enabled) {
+#if 0        
+        if (millis() - storeForwardModule->lastHeartbeat > (storeForwardModule->heartbeatInterval * 1200)) { //no heartbeat, overlap a bit
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgQuestionL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8, imgQuestionL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgQuestion);
+#endif
+        } else {
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8, imgSFL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 16, 8, imgSFL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 13 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 11, 8, imgSF);
+#endif
+        }
+#endif        
+    } else {
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8, imgInfoL1);
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8, imgInfoL2);
+#else
+        display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8, imgInfo);
+#endif
+    }
+
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(ourId), y + FONT_HEIGHT_SMALL, ourId);
 
     // Draw any log messages
@@ -1397,7 +1444,6 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 {
 #if HAS_WIFI
     const char *wifiName = config.network.wifi_ssid;
-    const char *wifiPsw = config.network.wifi_psk;
 
     displayedNodeNum = 0; // Not currently showing a node pane
 
@@ -1406,19 +1452,24 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
-    if (isSoftAPForced()) {
-        display->drawString(x, y, String("WiFi: Software AP (Admin)"));
-    } else if (config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
-        display->drawString(x, y, String("WiFi: Software AP"));
-    } else if (WiFi.status() != WL_CONNECTED) {
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
+    if (WiFi.status() != WL_CONNECTED) {
         display->drawString(x, y, String("WiFi: Not Connected"));
+        display->drawString(x + 1, y, String("WiFi: Not Connected"));
     } else {
         display->drawString(x, y, String("WiFi: Connected"));
+        display->drawString(x + 1, y, String("WiFi: Connected"));
 
         display->drawString(x + SCREEN_WIDTH - display->getStringWidth("RSSI " + String(WiFi.RSSI())), y,
                             "RSSI " + String(WiFi.RSSI()));
+        display->drawString(x + SCREEN_WIDTH - display->getStringWidth("RSSI " + String(WiFi.RSSI())) - 1, y,
+                            "RSSI " + String(WiFi.RSSI()));
     }
 
+        display->setColor(WHITE);
+
     /*
     - WL_CONNECTED: assigned when connected to a WiFi network;
     - WL_NO_SSID_AVAIL: assigned when no SSID are available;
@@ -1431,25 +1482,14 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     - WL_NO_SHIELD: assigned when no WiFi shield is present;
 
     */
-    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
-        if (config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN || isSoftAPForced()) {
-            display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
-
-            // Number of connections to the AP. Default max for the esp32 is 4
-            display->drawString(x + SCREEN_WIDTH - display->getStringWidth("(" + String(WiFi.softAPgetStationNum()) + "/4)"),
-                                y + FONT_HEIGHT_SMALL * 1, "(" + String(WiFi.softAPgetStationNum()) + "/4)");
-        } else {
-            display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.localIP().toString().c_str()));
-        }
-
+    if (WiFi.status() == WL_CONNECTED) {
+        display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.localIP().toString().c_str()));
     } else if (WiFi.status() == WL_NO_SSID_AVAIL) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "SSID Not Found");
     } else if (WiFi.status() == WL_CONNECTION_LOST) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "Connection Lost");
     } else if (WiFi.status() == WL_CONNECT_FAILED) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "Connection Failed");
-        //} else if (WiFi.status() == WL_DISCONNECTED) {
-        //    display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "Disconnected");
     } else if (WiFi.status() == WL_IDLE_STATUS) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "Idle ... Reconnecting");
     } else {
@@ -1516,24 +1556,8 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         }
     }
 
-    if (isSoftAPForced()) {
-        if ((millis() / 10000) % 2) {
-            display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: meshtasticAdmin");
-        } else {
-            display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "PWD: 12345678");
-        }
+    display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
 
-    } else {
-        if (config.network.wifi_mode== Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
-            if ((millis() / 10000) % 2) {
-                display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
-            } else {
-                display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "PWD: " + String(wifiPsw));
-            }
-        } else {
-            display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
-        }
-    }
     display->drawString(x, y + FONT_HEIGHT_SMALL * 3, "http://meshtastic.local");
 
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
@@ -1554,6 +1578,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // The coordinates define the left starting point of the text
     display->setTextAlignment(TEXT_ALIGN_LEFT);
 
+    display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+    display->setColor(BLACK);
+
     char batStr[20];
     if (powerStatus->getHasBattery()) {
         int batV = powerStatus->getBatteryVoltageMv() / 1000;
@@ -1564,9 +1591,11 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
         // Line 1
         display->drawString(x, y, batStr);
+        display->drawString(x + 1, y, batStr);
     } else {
         // Line 1
         display->drawString(x, y, String("USB"));
+        display->drawString(x + 1, y, String("USB"));
     }
 
     auto mode = "";
@@ -1599,6 +1628,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     }
 
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
 
     // Line 2
     uint32_t currentMillis = millis();
@@ -1611,6 +1641,8 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // minutes %= 60;
     // hours %= 24;
 
+    display->setColor(WHITE);
+
     // Show uptime as days, hours, minutes OR seconds
     String uptime;
     if (days >= 2)
@@ -1646,7 +1678,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     char chUtil[13];
     sprintf(chUtil, "ChUtil %2.0f%%", airTime->channelUtilizationPercent());
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(chUtil), y + FONT_HEIGHT_SMALL * 1, chUtil);
-
+if (config.position.gps_enabled) {
     // Line 3
     if (config.display.gps_format !=
         Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
@@ -1654,7 +1686,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
     // Line 4
     drawGPScoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
-
+} else {
+    drawGPSpowerstat(display, x - (SCREEN_WIDTH / 4), y + FONT_HEIGHT_SMALL * 2, gpsStatus);
+}
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)

src/graphics/Screen.h

@@ -10,7 +10,7 @@ namespace graphics
 class Screen 
 {
   public:
-    Screen(char){}
+    explicit Screen(char){}
     void onPress() {}
     void setup() {}
     void setOn(bool) {}
@@ -21,6 +21,7 @@ class Screen
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
     void startRebootScreen() {}
+    void startFirmwareUpdateScreen() {}
 };
 }
 
@@ -131,8 +132,7 @@ class Screen : public concurrency::OSThread
     void setOn(bool on)
     {
         if (!on)
-            handleSetOn(
-                false); // We handle off commands immediately, because they might be called because the CPU is shutting down
+            handleSetOn(false); // We handle off commands immediately, because they might be called because the CPU is shutting down
         else
             enqueueCmd(ScreenCmd{.cmd = on ? Cmd::SET_ON : Cmd::SET_OFF});
     }

src/graphics/images.h

@@ -12,36 +12,18 @@ const uint8_t imgPower[] PROGMEM =         { 0x40, 0x40, 0x40, 0x58, 0x48, 0x08,
 const uint8_t imgUser[] PROGMEM =          { 0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3C };
 const uint8_t imgPositionEmpty[] PROGMEM = { 0x20, 0x30, 0x28, 0x24, 0x42, 0xFF };
 const uint8_t imgPositionSolid[] PROGMEM = { 0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF };
-const uint8_t imgInfo[] PROGMEM =          { 0xFF, 0x81, 0x81, 0xB5, 0xB5, 0x81, 0x81, 0xFF }; 
 
-#include "img/icon.xbm"
-
-// We now programmatically draw our compass
-#if 0
-const
-#include "img/compass.xbm"
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
+const uint8_t imgQuestionL1[] PROGMEM =        { 0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff };
+const uint8_t imgQuestionL2[] PROGMEM =        { 0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f };
+const uint8_t imgInfoL1[] PROGMEM =        { 0xff, 0x01, 0x01, 0x01, 0x1e, 0x7f, 0x1e, 0x01, 0x01, 0x01, 0x01, 0xff };
+const uint8_t imgInfoL2[] PROGMEM =        { 0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f };
+const uint8_t imgSFL1[] PROGMEM =          { 0xb6, 0x8f, 0x19, 0x11, 0x31, 0xe3, 0xc2, 0x01, 0x01, 0xf9, 0xf9, 0x89, 0x89, 0x89, 0x09, 0xeb};
+const uint8_t imgSFL2[] PROGMEM =          { 0x0e, 0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x00, 0x0f, 0x0f, 0x00, 0x08, 0x08, 0x08, 0x0f};
+#else
+const uint8_t imgInfo[] PROGMEM =          { 0xff, 0x81, 0x00, 0xfb, 0xfb, 0x00, 0x81, 0xff };
+const uint8_t imgQuestion[] PROGMEM =      { 0xbf, 0x41, 0xc0, 0x8b, 0xdb, 0x70, 0xa1, 0xdf };
+const uint8_t imgSF[] PROGMEM =            { 0xd2, 0xb7, 0xad, 0xbb, 0x92, 0x01, 0xfd, 0xfd, 0x15, 0x85, 0xf5};
 #endif
 
-#if 0
-const uint8_t activeSymbol[] PROGMEM = {
-    B00000000,
-    B00000000,
-    B00011000,
-    B00100100,
-    B01000010,
-    B01000010,
-    B00100100,
-    B00011000
-};
-
-const uint8_t inactiveSymbol[] PROGMEM = {
-    B00000000,
-    B00000000,
-    B00000000,
-    B00000000,
-    B00011000,
-    B00011000,
-    B00000000,
-    B00000000
-};
-#endif
+#include "img/icon.xbm"

src/graphics/img/compass.xbm

@@ -1,28 +0,0 @@
-#define compass_width 48
-#define compass_height 48
-static char compass_bits[] = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x01, 0x00, 
-  0x00, 0xC0, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0x00, 
-  0x00, 0xF8, 0xFF, 0xFF, 0x1F, 0x00, 0x00, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 
-  0x00, 0xFE, 0x01, 0x80, 0x7F, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x7F, 0x00, 
-  0x00, 0x7F, 0x00, 0x00, 0xFE, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xFC, 0x01, 
-  0x80, 0x1F, 0x00, 0x00, 0xF8, 0x01, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x01, 
-  0xC0, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 
-  0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 0xFC, 0x07, 0x00, 0x00, 0xE0, 0x3F, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 
-  0xC0, 0x07, 0x00, 0x00, 0xE0, 0x03, 0xC0, 0x0F, 0x00, 0x00, 0xF0, 0x03, 
-  0x80, 0x0F, 0x00, 0x00, 0xF0, 0x01, 0x80, 0x1F, 0x00, 0x00, 0xF8, 0x01, 
-  0x80, 0x3F, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x7F, 0x00, 0x00, 0xFE, 0x00, 
-  0x00, 0xFE, 0x00, 0x00, 0x7F, 0x00, 0x00, 0xFE, 0x01, 0x80, 0x7F, 0x00, 
-  0x00, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 0x00, 0xF8, 0xFF, 0xFF, 0x1F, 0x00, 
-  0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x03, 0x00, 
-  0x00, 0x80, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
-  };

src/graphics/img/pin.xbm

@@ -1,6 +0,0 @@
-#define pin_width 13
-#define pin_height 13
-static char pin_bits[] = {
-  0x00, 0x00, 0xF0, 0x01, 0xF8, 0x03, 0xFC, 0x07, 0xBC, 0x07, 0xBC, 0x07, 
-  0xFC, 0x07, 0xF8, 0x03, 0xF8, 0x03, 0xF0, 0x01, 0xE0, 0x00, 0xE0, 0x00, 
-  0x00, 0x00, };

src/main.cpp

@@ -8,8 +8,6 @@
 #include "configuration.h"
 #include "error.h"
 #include "power.h"
-// #include "rom/rtc.h"
-//#include "DSRRouter.h"
 #include "ReliableRouter.h"
 // #include "debug.h"
 #include "FSCommon.h"
@@ -30,21 +28,28 @@
 // #include <driver/rtc_io.h>
 
 #include "mesh/http/WiFiAPClient.h"
+#include "mesh/eth/ethClient.h"
 
 #ifdef ARCH_ESP32
 #include "mesh/http/WebServer.h"
 #include "nimble/NimbleBluetooth.h"
 #endif
 
-#if HAS_WIFI || defined(ARCH_PORTDUINO)
+#if HAS_WIFI
 #include "mesh/wifi/WiFiServerAPI.h"
 #include "mqtt/MQTT.h"
 #endif
 
+#if HAS_ETHERNET
+#include "mesh/eth/ethServerAPI.h"
+#include "mqtt/MQTT.h"
+#endif
+
 #include "LLCC68Interface.h"
 #include "RF95Interface.h"
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
+#include "SX1280Interface.h"
 #if !HAS_RADIO && defined(ARCH_PORTDUINO)
 #include "platform/portduino/SimRadio.h"
 #endif
@@ -80,6 +85,12 @@ uint8_t kb_model;
 // The I2C address of the RTC Module (if found)
 uint8_t rtc_found;
 
+// Keystore Chips
+uint8_t keystore_found;
+#ifndef ARCH_PORTDUINO
+ATECCX08A atecc;
+#endif
+
 bool eink_found = true;
 
 uint32_t serialSinceMsec;
@@ -87,7 +98,7 @@ uint32_t serialSinceMsec;
 bool pmu_found;
 
 // Array map of sensor types (as array index) and i2c address as value we'll find in the i2c scan
-uint8_t nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658+1] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+uint8_t nodeTelemetrySensorsMap[_TelemetrySensorType_MAX + 1] = { 0 }; // one is enough, missing elements will be initialized to 0 anyway.
 
 Router *router = NULL; // Users of router don't care what sort of subclass implements that API
 
@@ -127,8 +138,9 @@ bool ButtonThread::shutdown_on_long_stop = false;
 #endif
 
 static Periodic *ledPeriodic;
-static OSThread *powerFSMthread, *buttonThread;
+static OSThread *powerFSMthread;
 #if HAS_BUTTON
+static OSThread *buttonThread;
 uint32_t ButtonThread::longPressTime = 0;
 #endif
 
@@ -182,8 +194,6 @@ void setup()
     digitalWrite(RESET_OLED, 1);
 #endif
 
-    bool forceSoftAP = 0;
-
 #ifdef BUTTON_PIN
 #ifdef ARCH_ESP32
 
@@ -196,12 +206,6 @@ void setup()
     delay(10);
 #endif
 
-    // BUTTON_PIN is pulled high by a 12k resistor.
-    if (!digitalRead(BUTTON_PIN)) {
-        forceSoftAP = 1;
-        DEBUG_MSG("Setting forceSoftAP = 1\n");
-    }
-
 #endif
 #endif
 
@@ -211,7 +215,6 @@ void setup()
 
     fsInit();
 
-    // router = new DSRRouter();
     router = new ReliableRouter();
 
 #ifdef I2C_SDA1
@@ -233,8 +236,38 @@ void setup()
     delay(1);
 #endif
 
+#ifdef RAK4630
+    // We need to enable 3.3V periphery in order to scan it
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, 1);
+#endif
+
+
+    // Currently only the tbeam has a PMU
+    // PMU initialization needs to be placed before scanI2Cdevice
+    power = new Power();
+    power->setStatusHandler(powerStatus);
+    powerStatus->observe(&power->newStatus);
+    power->setup(); // Must be after status handler is installed, so that handler gets notified of the initial configuration
+
+
+#ifdef LILYGO_TBEAM_S3_CORE
+    // In T-Beam-S3-core, the I2C device cannot be scanned before power initialization, otherwise the device will be stuck
+    // PCF8563 RTC in tbeam-s3 uses Wire1 to share I2C bus
+    Wire1.beginTransmission(PCF8563_RTC);
+    if (Wire1.endTransmission() == 0){
+        rtc_found = PCF8563_RTC;
+        DEBUG_MSG("PCF8563 RTC found\n");
+    }
+#endif
+
     // We need to scan here to decide if we have a screen for nodeDB.init()
     scanI2Cdevice();
+
+#ifdef HAS_SDCARD
+    setupSDCard();
+#endif
+
 #ifdef RAK4630
     // scanEInkDevice();
 #endif
@@ -263,25 +296,16 @@ void setup()
 #ifdef ARCH_NRF52
     nrf52Setup();
 #endif
-    playStartMelody();
     // We do this as early as possible because this loads preferences from flash
     // but we need to do this after main cpu iniot (esp32setup), because we need the random seed set
     nodeDB.init();
 
-    // Currently only the tbeam has a PMU
-    power = new Power();
-    power->setStatusHandler(powerStatus);
-    powerStatus->observe(&power->newStatus);
-    power->setup(); // Must be after status handler is installed, so that handler gets notified of the initial configuration
+    playStartMelody();
+
+    // fixed screen override?
+    if (config.display.oled != Config_DisplayConfig_OledType_OLED_AUTO)
+        screen_model = config.display.oled;
 
-    /*
-    * Repeat the scanning for I2C devices after power initialization. 
-    * Boards with an PMU need to be powered on to correctly scan to the device address, such as t-beam-s3-core
-    */
-    if ((HW_VENDOR == HardwareModel_LILYGO_TBEAM_S3_CORE) || (HW_VENDOR == HardwareModel_TBEAM)) {
-        scanI2Cdevice();
-    }
-    
     // Init our SPI controller (must be before screen and lora)
     initSPI();
 #ifndef ARCH_ESP32
@@ -360,6 +384,19 @@ void setup()
     }
 #endif
 
+#if defined(USE_SX1280)
+    if (!rIf) {
+        rIf = new SX1280Interface(SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY, SPI);
+        if (!rIf->init()) {
+            DEBUG_MSG("Warning: Failed to find SX1280 radio\n");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            DEBUG_MSG("SX1280 Radio init succeeded, using SX1280 radio\n");
+        }
+    }
+#endif
+
 #if defined(USE_SX1262)
     if (!rIf) {
         rIf = new SX1262Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
@@ -412,12 +449,41 @@ void setup()
     }
 #endif
 
-#if HAS_WIFI
+// check if the radio chip matches the selected region
+
+if((config.lora.region == Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())){
+    DEBUG_MSG("Warning: Radio chip does not support 2.4GHz LoRa. Reverting to unset.\n");
+    config.lora.region = Config_LoRaConfig_RegionCode_UNSET;
+    nodeDB.saveToDisk(SEGMENT_CONFIG);
+    if(!rIf->reconfigure()) {
+        DEBUG_MSG("Reconfigure failed, rebooting\n");
+        screen->startRebootScreen();
+        rebootAtMsec = millis() + 5000;
+    }
+}
+
+if((config.lora.region != Config_LoRaConfig_RegionCode_LORA_24) && (rIf->wideLora())){
+    DEBUG_MSG("Warning: Radio chip only supports 2.4GHz LoRa. Adjusting Region.\n");
+    config.lora.region = Config_LoRaConfig_RegionCode_LORA_24;
+    nodeDB.saveToDisk(SEGMENT_CONFIG);
+    if(!rIf->reconfigure()) {
+        DEBUG_MSG("Reconfigure failed, rebooting\n");
+        screen->startRebootScreen();
+        rebootAtMsec = millis() + 5000;
+    }
+}
+
+#if HAS_WIFI || HAS_ETHERNET
     mqttInit();
 #endif
 
+#ifndef ARCH_PORTDUINO
     // Initialize Wifi
-    initWifi(forceSoftAP);
+    initWifi();
+
+    // Initialize Ethernet
+    initEthernet();
+#endif
 
 #ifdef ARCH_ESP32
     // Start web server thread.

src/main.h

@@ -6,19 +6,27 @@
 #include "PowerStatus.h"
 #include "graphics/Screen.h"
 #include "mesh/generated/telemetry.pb.h"
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#include <SparkFun_ATECCX08a_Arduino_Library.h>
+#endif
 
 extern uint8_t screen_found;
 extern uint8_t screen_model;
 extern uint8_t cardkb_found;
 extern uint8_t kb_model;
 extern uint8_t rtc_found;
+extern uint8_t keystore_found;
 
 extern bool eink_found;
 extern bool pmu_found;
 extern bool isCharging;
 extern bool isUSBPowered;
 
-extern uint8_t nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658+1];
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+extern ATECCX08A atecc;
+#endif
+
+extern uint8_t nodeTelemetrySensorsMap[_TelemetrySensorType_MAX + 1];
 
 extern int TCPPort; // set by Portduino
 

src/mesh/Channels.cpp

@@ -62,13 +62,6 @@ Channel &Channels::fixupChannel(ChannelIndex chIndex)
         // Convert the old string "Default" to our new short representation
         if (strcmp(channelSettings.name, "Default") == 0)
             *channelSettings.name = '\0';
-
-        /* Convert any old usage of the defaultpsk into our new short representation.
-        if (channelSettings.psk.size == sizeof(defaultpsk) &&
-            memcmp(channelSettings.psk.bytes, defaultpsk, sizeof(defaultpsk)) == 0) {
-            *channelSettings.psk.bytes = 1;
-            channelSettings.psk.size = 1;
-        } */
     }
 
     hashes[chIndex] = generateHash(chIndex);
@@ -86,7 +79,7 @@ void Channels::initDefaultChannel(ChannelIndex chIndex)
     Config_LoRaConfig &loraConfig = config.lora;
 
     loraConfig.modem_preset = Config_LoRaConfig_ModemPreset_LONG_FAST; // Default to Long Range & Fast
-
+    loraConfig.use_preset = true;
     loraConfig.tx_power = 0; // default
     uint8_t defaultpskIndex = 1;
     channelSettings.psk.bytes[0] = defaultpskIndex;
@@ -124,7 +117,22 @@ CryptoKey Channels::getKey(ChannelIndex chIndex)
             DEBUG_MSG("Expanding short PSK #%d\n", pskIndex);
             if (pskIndex == 0)
                 k.length = 0; // Turn off encryption
-            else {
+            else if (oemStore.oem_aes_key.size > 1) {
+                // Use the OEM key
+                DEBUG_MSG("Using OEM Key with %d bytes\n", oemStore.oem_aes_key.size);
+                memcpy(k.bytes, oemStore.oem_aes_key.bytes , oemStore.oem_aes_key.size);
+                k.length = oemStore.oem_aes_key.size;
+                // Bump up the last byte of PSK as needed
+                uint8_t *last = k.bytes + oemStore.oem_aes_key.size - 1;
+                *last = *last + pskIndex - 1; // index of 1 means no change vs defaultPSK
+                if (k.length < 16) {
+                    DEBUG_MSG("Warning: OEM provided a too short AES128 key - padding\n");
+                    k.length = 16;
+                } else if (k.length < 32 && k.length != 16) {
+                    DEBUG_MSG("Warning: OEM provided a too short AES256 key - padding\n");
+                    k.length = 32;
+                }
+            } else {
                 memcpy(k.bytes, defaultpsk, sizeof(defaultpsk));
                 k.length = sizeof(defaultpsk);
                 // Bump up the last byte of PSK as needed
@@ -188,6 +196,17 @@ Channel &Channels::getByIndex(ChannelIndex chIndex)
     return *ch;
 }
 
+Channel &Channels::getByName(const char* chName)
+{
+    for (ChannelIndex i = 0; i < getNumChannels(); i++) {
+        if (strcasecmp(channelFile.channels[i].settings.name, chName) == 0) {
+            return channelFile.channels[i];
+        }
+    }
+
+    return getByIndex(getPrimaryIndex());
+}
+
 void Channels::setChannel(const Channel &c)
 {
     Channel &old = getByIndex(c.index);
@@ -210,9 +229,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app fucked up and forgot to set channelSettings.name
 
-        if (config.lora.bandwidth != 0)
-            channelName = "Custom";
-        else
+        if (config.lora.use_preset) {
             switch (config.lora.modem_preset) {
             case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
                 channelName = "ShortSlow";
@@ -239,6 +256,10 @@ const char *Channels::getName(size_t chIndex)
                 channelName = "Invalid";
                 break;
             }
+        }
+        else {
+            channelName = "Custom";
+        }
     }
 
     return channelName;
@@ -257,7 +278,7 @@ their nodes
 *
 * This function will also need to be implemented in GUI apps that talk to the radio.
 *
-* https://github.com/meshtastic/Meshtastic-device/issues/269
+* https://github.com/meshtastic/firmware/issues/269
 */
 const char *Channels::getPrimaryName()
 {

src/mesh/Channels.h

@@ -40,6 +40,9 @@ class Channels
     /** Return the Channel for a specified index */
     Channel &getByIndex(ChannelIndex chIndex);
 
+     /** Return the Channel for a specified name, return primary if not found. */
+    Channel &getByName(const char* chName);
+
     /** Using the index inside the channel, update the specified channel's settings and role.  If this channel is being promoted
      * to be primary, force all other channels to be secondary.
      */
@@ -74,7 +77,7 @@ class Channels
      *
      * This function will also need to be implemented in GUI apps that talk to the radio.
      *
-     * https://github.com/meshtastic/Meshtastic-device/issues/269
+     * https://github.com/meshtastic/firmware/issues/269
     */
     const char *getPrimaryName();
 

src/mesh/FloodingRouter.cpp

@@ -29,8 +29,8 @@ bool FloodingRouter::shouldFilterReceived(MeshPacket *p)
 
 void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
-    PacketId ackId = ((c && c->error_reason == Routing_Error_NONE) || !c) ? p->decoded.request_id : 0;
-    if (ackId && p->to != getNodeNum()) {
+    bool isAck = ((c && c->error_reason == Routing_Error_NONE)); // consider only ROUTING_APP message without error as ACK
+    if (isAck && p->to != getNodeNum()) {
         // do not flood direct message that is ACKed 
         DEBUG_MSG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
         Router::cancelSending(p->to, p->decoded.request_id);   // cancel rebroadcast for this DM
@@ -41,6 +41,11 @@ void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 
                 tosend->hop_limit--; // bump down the hop count
 
+                // If it is a traceRoute request, update the route that it went via me
+                if (p->which_payload_variant == MeshPacket_decoded_tag && traceRouteModule->wantPacket(p)) {
+                    traceRouteModule->updateRoute(tosend);
+                }
+
                 printPacket("Rebroadcasting received floodmsg to neighbors", p);
                 // Note: we are careful to resend using the original senders node id
                 // We are careful not to call our hooked version of send() - because we don't want to check this again

src/mesh/FloodingRouter.h

@@ -2,6 +2,7 @@
 
 #include "PacketHistory.h"
 #include "Router.h"
+#include "modules/TraceRouteModule.h"
 
 /**
  * This is a mixin that extends Router with the ability to do Naive Flooding (in the standard mesh protocol sense)

src/mesh/InterfacesTemplates.cpp

@@ -1,7 +1,10 @@
 #include "SX126xInterface.h"
 #include "SX126xInterface.cpp"
+#include "SX128xInterface.h"
+#include "SX128xInterface.cpp"
 
 // We need this declaration for proper linking in derived classes
 template class SX126xInterface<SX1262>;
 template class SX126xInterface<SX1268>;
-template class SX126xInterface<LLCC68>;
+template class SX126xInterface<LLCC68>;
+template class SX128xInterface<SX1280>;

src/mesh/MeshModule.cpp

@@ -109,10 +109,7 @@ void MeshModule::callPlugins(const MeshPacket &mp, RxSource src)
             /// Also: if a packet comes in on the local PC interface, we don't check for bound channels, because it is TRUSTED and it needs to
             /// to be able to fetch the initial admin packets without yet knowing any channels.
 
-            bool rxChannelOk = !pi.boundChannel || (mp.from == 0) ||
-                !ch ||
-                strlen(ch->settings.name) > 0 ||
-                (strcasecmp(ch->settings.name, pi.boundChannel) == 0);
+            bool rxChannelOk = !pi.boundChannel || (mp.from == 0) || (strcasecmp(ch->settings.name, pi.boundChannel) == 0);
 
             if (!rxChannelOk) {
                 // no one should have already replied!

src/mesh/MeshRadio.h

@@ -15,6 +15,7 @@ struct RegionInfo {
     uint8_t powerLimit; // Or zero for not set
     bool audioPermitted;
     bool freqSwitching;
+    bool wideLora;
     const char *name; // EU433 etc
 };
 

src/mesh/MeshService.cpp

@@ -104,16 +104,17 @@ bool MeshService::reloadConfig(int saveWhat)
 }
 
 /// The owner User record just got updated, update our node DB and broadcast the info into the mesh
-void MeshService::reloadOwner()
+void MeshService::reloadOwner(bool shouldSave)
 {
     // DEBUG_MSG("reloadOwner()\n");
     // update our local data directly
     nodeDB.updateUser(nodeDB.getNodeNum(), owner);
     assert(nodeInfoModule);
-    // update everyone else
-    if (nodeInfoModule)
+    // update everyone else and save to disk
+    if (nodeInfoModule && shouldSave) {
         nodeInfoModule->sendOurNodeInfo();
-    nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
+        nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
+    }
 }
 
 /**
@@ -283,3 +284,8 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
 
     return 0;
 }
+
+bool MeshService::isToPhoneQueueEmpty() 
+{
+    return toPhoneQueue.isEmpty();
+}

src/mesh/MeshService.h

@@ -69,7 +69,7 @@ class MeshService
     bool reloadConfig(int saveWhat=SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS);
 
     /// The owner User record just got updated, update our node DB and broadcast the info into the mesh
-    void reloadOwner();
+    void reloadOwner(bool shouldSave = true);
 
     /// Called when the user wakes up our GUI, normally sends our latest location to the mesh (if we have it), otherwise at least
     /// sends our owner
@@ -89,6 +89,8 @@ class MeshService
       /// Send a packet to the phone
     void sendToPhone(MeshPacket *p);
 
+    bool isToPhoneQueueEmpty();
+
   private:
     /// Called when our gps position has changed - updates nodedb and sends Location message out into the mesh
     /// returns 0 to allow futher processing

src/mesh/NodeDB.cpp

@@ -38,6 +38,7 @@ MyNodeInfo &myNodeInfo = devicestate.my_node;
 LocalConfig config;
 LocalModuleConfig moduleConfig;
 ChannelFile channelFile;
+OEMStore oemStore;
 
 /** The current change # for radio settings.  Starts at 0 on boot and any time the radio settings
  * might have changed is incremented.  Allows others to detect they might now be on a new channel.
@@ -129,6 +130,8 @@ bool NodeDB::factoryReset()
     // second, install default state (this will deal with the duplicate mac address issue)
     installDefaultDeviceState();
     installDefaultConfig();
+    installDefaultModuleConfig();
+    installDefaultChannels();
     // third, write everything to disk
     saveToDisk();
 #ifdef ARCH_ESP32
@@ -159,6 +162,7 @@ void NodeDB::installDefaultConfig()
     config.has_network = true;
     config.has_bluetooth = true;
     config.lora.tx_enabled = true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
+    config.lora.override_duty_cycle = false; 
     config.lora.region = Config_LoRaConfig_RegionCode_UNSET;
     config.lora.modem_preset = Config_LoRaConfig_ModemPreset_LONG_FAST;
     config.lora.hop_limit = HOP_RELIABLE;
@@ -201,6 +205,7 @@ void NodeDB::installDefaultModuleConfig()
 {
     DEBUG_MSG("Installing default ModuleConfig\n");
     memset(&moduleConfig, 0, sizeof(ModuleConfig));
+    
     moduleConfig.version = DEVICESTATE_CUR_VER;
     moduleConfig.has_mqtt = true;
     moduleConfig.has_range_test = true;
@@ -210,6 +215,10 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_external_notification = true;
     moduleConfig.has_canned_message = true;
 
+    strncpy(moduleConfig.mqtt.address, default_mqtt_address, sizeof(moduleConfig.mqtt.address));
+    strncpy(moduleConfig.mqtt.username, default_mqtt_username, sizeof(moduleConfig.mqtt.username));
+    strncpy(moduleConfig.mqtt.password, default_mqtt_password, sizeof(moduleConfig.mqtt.password));
+
     initModuleConfigIntervals();
 }
 
@@ -354,6 +363,8 @@ static const char *prefFileName = "/prefs/db.proto";
 static const char *configFileName = "/prefs/config.proto";
 static const char *moduleConfigFileName = "/prefs/module.proto";
 static const char *channelFileName = "/prefs/channels.proto";
+static const char *oemConfigFile = "/oem/oem.proto";
+
 
 /** Load a protobuf from a file, return true for success */
 bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct)
@@ -433,6 +444,9 @@ void NodeDB::loadFromDisk()
             DEBUG_MSG("Loaded saved channelFile version %d\n", channelFile.version);
         }
     }
+
+    if (loadProto(oemConfigFile, OEMStore_size, sizeof(OEMStore), OEMStore_fields, &oemStore))
+        DEBUG_MSG("Loaded OEMStore\n");
 }
 
 /** Save a protobuf from a file, return true for success */
@@ -462,6 +476,15 @@ bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_
             DEBUG_MSG("Error: can't rename new pref file\n");
     } else {
         DEBUG_MSG("Can't write prefs\n");
+#ifdef ARCH_NRF52
+        static uint8_t failedCounter = 0;
+        failedCounter++;
+        if(failedCounter >= 2){
+            FSCom.format();
+            //After formatting, the device needs to be restarted
+            nodeDB.resetRadioConfig(true);
+        }
+#endif
     }
 #else
     DEBUG_MSG("ERROR: Filesystem not implemented\n");
@@ -733,9 +756,9 @@ void recordCriticalError(CriticalErrorCode code, uint32_t address, const char *f
     String lcd = String("Critical error ") + code + "!\n";
     screen->print(lcd.c_str());
     if (filename)
-        DEBUG_MSG("NOTE! Recording critical error %d at %s:%lx\n", code, filename, address);
+        DEBUG_MSG("NOTE! Recording critical error %d at %s:%lu\n", code, filename, address);
     else
-        DEBUG_MSG("NOTE! Recording critical error %d, address=%lx\n", code, address);
+        DEBUG_MSG("NOTE! Recording critical error %d, address=0x%lx\n", code, address);
 
     // Record error to DB
     myNodeInfo.error_code = code;

src/mesh/NodeDB.h

@@ -18,7 +18,7 @@ DeviceState versions used to be defined in the .proto file but really only this
 #define SEGMENT_DEVICESTATE 4
 #define SEGMENT_CHANNELS 8
 
-#define DEVICESTATE_CUR_VER 19
+#define DEVICESTATE_CUR_VER 20
 #define DEVICESTATE_MIN_VER DEVICESTATE_CUR_VER
 
 extern DeviceState devicestate;
@@ -26,6 +26,7 @@ extern ChannelFile channelFile;
 extern MyNodeInfo &myNodeInfo;
 extern LocalConfig config;
 extern LocalModuleConfig moduleConfig;
+extern OEMStore oemStore;
 extern User &owner;
 
 /// Given a node, return how many seconds in the past (vs now) that we last heard from it
@@ -57,7 +58,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(int saveWhat=SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS), saveChannelsToDisk(), saveDeviceStateToDisk();
+    void saveToDisk(int saveWhat = SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or
@@ -193,6 +194,10 @@ extern NodeDB nodeDB;
 #define default_min_wake_secs 10
 #define default_screen_on_secs 60 * 10
 
+#define default_mqtt_address "mqtt.meshtastic.org"
+#define default_mqtt_username "meshdev"
+#define default_mqtt_password "large4cats"
+
 inline uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval)
 {
     if (configuredInterval > 0) return configuredInterval * 1000;

src/mesh/PhoneAPI.cpp

@@ -249,11 +249,15 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
             fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_canned_message_tag;
             fromRadioScratch.moduleConfig.payload_variant.canned_message = moduleConfig.canned_message;
             break;
+        case ModuleConfig_audio_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_audio_tag;
+            fromRadioScratch.moduleConfig.payload_variant.audio = moduleConfig.audio;
+            break;
         }
 
         config_state++;
         // Advance when we have sent all of our ModuleConfig objects
-        if (config_state > ModuleConfig_canned_message_tag) {
+        if (config_state > ModuleConfig_audio_tag) {
             state = STATE_SEND_COMPLETE_ID;
             config_state = 0;
         }

src/mesh/RF95Interface.cpp

@@ -129,6 +129,7 @@ bool RF95Interface::reconfigure()
 
     if (power > MAX_POWER) // This chip has lower power limits than some
         power = MAX_POWER;
+        
     err = lora->setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);

src/mesh/RadioInterface.cpp

@@ -6,15 +6,16 @@
 #include "Router.h"
 #include "assert.h"
 #include "configuration.h"
+#include "main.h"
 #include "sleep.h"
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
 
-#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching)                 \
+#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching, wide_lora)                 \
     {                                                                                                                            \
         Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted,            \
-            frequency_switching, #name                                                                                           \
+            frequency_switching, wide_lora, #name                                                                                           \
     }
 
 const RegionInfo regions[] = {
@@ -22,12 +23,12 @@ const RegionInfo regions[] = {
         https://link.springer.com/content/pdf/bbm%3A978-1-4842-4357-2%2F1.pdf
         https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
     */
-    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false),
+    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(EU_433, 433.0f, 434.0f, 10, 0, 12, true, false),
+    RDEF(EU_433, 433.0f, 434.0f, 10, 0, 12, true, false, false),
 
     /*
         https://www.thethingsnetwork.org/docs/lorawan/duty-cycle/
@@ -43,23 +44,23 @@ const RegionInfo regions[] = {
         (Please refer to section 4.21 in the following document)
         https://ec.europa.eu/growth/tools-databases/tris/index.cfm/ro/search/?trisaction=search.detail&year=2021&num=528&dLang=EN
      */
-    RDEF(EU_868, 869.4f, 869.65f, 10, 0, 27, false, false),
+    RDEF(EU_868, 869.4f, 869.65f, 10, 0, 27, false, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false),
+    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(JP, 920.8f, 927.8f, 100, 0, 16, true, false),
+    RDEF(JP, 920.8f, 927.8f, 100, 0, 16, true, false, false),
 
     /*
         https://www.iot.org.au/wp/wp-content/uploads/2016/12/IoTSpectrumFactSheet.pdf
         https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
      */
-    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false),
+    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         https://digital.gov.ru/uploaded/files/prilozhenie-12-k-reshenyu-gkrch-18-46-03-1.pdf
@@ -67,38 +68,44 @@ const RegionInfo regions[] = {
         Note:
             - We do LBT, so 100% is allowed.
      */
-    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false),
+    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false, false),
 
     /*
         ???
      */
-    RDEF(KR, 920.0f, 923.0f, 100, 0, 0, true, false),
+    RDEF(KR, 920.0f, 923.0f, 100, 0, 0, true, false, false),
 
     /*
         ???
      */
-    RDEF(TW, 920.0f, 925.0f, 100, 0, 0, true, false),
+    RDEF(TW, 920.0f, 925.0f, 100, 0, 0, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false),
+    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false, false),
 
     /*
          https://rrf.rsm.govt.nz/smart-web/smart/page/-smart/domain/licence/LicenceSummary.wdk?id=219752
          https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
       */
-    RDEF(NZ_865, 864.0f, 868.0f, 100, 0, 0, true, false),
+    RDEF(NZ_865, 864.0f, 868.0f, 100, 0, 36, true, false, false),
 
     /*
        https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
     */
-    RDEF(TH, 920.0f, 925.0f, 100, 0, 16, true, false),
+    RDEF(TH, 920.0f, 925.0f, 100, 0, 16, true, false, false),
+
+    /*
+       2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
+    */
+
+    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 0, 10, true, false, true),
 
     /*
         This needs to be last. Same as US.
     */
-    RDEF(UNSET, 902.0f, 928.0f, 100, 0, 30, true, false)
+    RDEF(UNSET, 902.0f, 928.0f, 100, 0, 30, true, false, false)
 
 };
 
@@ -170,7 +177,7 @@ uint32_t RadioInterface::getRetransmissionMsec(const MeshPacket *p)
     static uint8_t bytes[MAX_RHPACKETLEN];
     size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), Data_fields, &p->decoded);
     uint32_t packetAirtime = getPacketTime(numbytes + sizeof(PacketHeader));
-    // Make sure enough time has elapsed for this packet to be sent and an ACK is received. 
+    // Make sure enough time has elapsed for this packet to be sent and an ACK is received.
     // DEBUG_MSG("Waiting for flooding message with airtime %d and slotTime is %d\n", packetAirtime, slotTimeMsec);
     float channelUtil = airTime->channelUtilizationPercent();
     uint8_t CWsize = map(channelUtil, 0, 100, CWmin, CWmax);
@@ -182,7 +189,7 @@ uint32_t RadioInterface::getRetransmissionMsec(const MeshPacket *p)
 uint32_t RadioInterface::getTxDelayMsec()
 {
     /** We wait a random multiple of 'slotTimes' (see definition in header file) in order to avoid collisions.
-    The pool to take a random multiple from is the contention window (CW), which size depends on the 
+    The pool to take a random multiple from is the contention window (CW), which size depends on the
     current channel utilization. */
     float channelUtil = airTime->channelUtilizationPercent();
     uint8_t CWsize = map(channelUtil, 0, 100, CWmin, CWmax);
@@ -218,7 +225,7 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr)
 
 void printPacket(const char *prefix, const MeshPacket *p)
 {
-    DEBUG_MSG("%s (id=0x%08x Fr0x%02x To0x%02x, WantAck%d, HopLim%d Ch0x%x", prefix, p->id, p->from & 0xff, p->to & 0xff,
+    DEBUG_MSG("%s (id=0x%08x fr=0x%02x to=0x%02x, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id, p->from & 0xff, p->to & 0xff,
               p->want_ack, p->hop_limit, p->channel);
     if (p->which_payload_variant == MeshPacket_decoded_tag) {
         auto &s = p->decoded;
@@ -354,40 +361,41 @@ void RadioInterface::applyModemConfig()
     // Set up default configuration
     // No Sync Words in LORA mode
     Config_LoRaConfig &loraConfig = config.lora;
-    if (loraConfig.spread_factor == 0) {
+    if (loraConfig.use_preset) {
+
         switch (loraConfig.modem_preset) {
         case Config_LoRaConfig_ModemPreset_SHORT_FAST:
-            bw = 250;
+            bw = (myRegion->wideLora) ? 812.5 : 250;
             cr = 8;
             sf = 7;
             break;
         case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-            bw = 250;
+            bw = (myRegion->wideLora) ? 812.5 : 250;
             cr = 8;
             sf = 8;
             break;
         case Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-            bw = 250;
+            bw = (myRegion->wideLora) ? 812.5 : 250;
             cr = 8;
             sf = 9;
             break;
         case Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-            bw = 250;
+            bw = (myRegion->wideLora) ? 812.5 : 250;
             cr = 8;
             sf = 10;
             break;
         case Config_LoRaConfig_ModemPreset_LONG_FAST:
-            bw = 250;
+            bw = (myRegion->wideLora) ? 812.5 : 250;
             cr = 8;
             sf = 11;
             break;
         case Config_LoRaConfig_ModemPreset_LONG_SLOW:
-            bw = 125;
+            bw = (myRegion->wideLora) ? 406.25 : 125;
             cr = 8;
             sf = 12;
             break;
         case Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
-            bw = 31.25;
+            bw = (myRegion->wideLora) ? 203.125 : 31.25;
             cr = 8;
             sf = 12;
             break;
@@ -403,20 +411,28 @@ void RadioInterface::applyModemConfig()
             bw = 31.25;
         if (bw == 62) // Fix for 62.5Khz bandwidth
             bw = 62.5;
+        if (bw == 200)
+            bw = 203.125;
+        if (bw == 400)
+            bw = 406.25;
+        if (bw == 800)
+            bw = 812.5;
+        if (bw == 1600)
+            bw = 1625.0;
     }
 
     power = loraConfig.tx_power;
     assert(myRegion); // Should have been found in init
 
-    if ((power == 0) || (power > myRegion->powerLimit))
+    if ((power == 0) || ((power > myRegion->powerLimit) && !devicestate.owner.is_licensed))
         power = myRegion->powerLimit;
 
     if (power == 0)
         power = 17; // Default to default power if we don't have a valid power
 
     // Set final tx_power back onto config
-    loraConfig.tx_power = power;
-    
+    loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
+
     // Calculate the number of channels
     uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
 
@@ -433,9 +449,10 @@ void RadioInterface::applyModemConfig()
     saveChannelNum(channel_num);
     saveFreq(freq + config.lora.frequency_offset);
 
+    DEBUG_MSG("Radio freq=%.3f, config.lora.frequency_offset=%.3f\n", freq, config.lora.frequency_offset);
     DEBUG_MSG("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d\n", myRegion->name, channelName, loraConfig.modem_preset, channel_num, power);
-    DEBUG_MSG("Radio myRegion->freqStart / myRegion->freqEnd: %f -> %f (%f mhz)\n", myRegion->freqStart, myRegion->freqEnd, myRegion->freqEnd - myRegion->freqStart);
-    DEBUG_MSG("Radio myRegion->numChannels: %d\n", numChannels);
+    DEBUG_MSG("Radio myRegion->freqStart -> myRegion->freqEnd: %f -> %f (%f mhz)\n", myRegion->freqStart, myRegion->freqEnd, myRegion->freqEnd - myRegion->freqStart);
+    DEBUG_MSG("Radio myRegion->numChannels: %d x %.3fkHz\n", numChannels, bw);
     DEBUG_MSG("Radio channel_num: %d\n", channel_num);
     DEBUG_MSG("Radio frequency: %f\n", getFreq());
     DEBUG_MSG("Slot time: %u msec\n", slotTimeMsec);
@@ -452,7 +469,7 @@ void RadioInterface::limitPower()
     if (myRegion->powerLimit)
         maxPower = myRegion->powerLimit;
 
-    if (power > maxPower) {
+    if ((power > maxPower) && !devicestate.owner.is_licensed) {
         DEBUG_MSG("Lowering transmit power because of regulatory limits\n");
         power = maxPower;
     }

src/mesh/RadioInterface.h

@@ -1,6 +1,5 @@
 #pragma once
 
-#include "../concurrency/NotifiedWorkerThread.h"
 #include "MemoryPool.h"
 #include "MeshTypes.h"
 #include "Observer.h"
@@ -97,6 +96,8 @@ class RadioInterface
      */
     virtual bool canSleep() { return true; }
 
+    virtual bool wideLora() { return false; }
+
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() { return true; }
 

src/mesh/RadioLibInterface.cpp

@@ -3,6 +3,7 @@
 #include "NodeDB.h"
 #include "SPILock.h"
 #include "configuration.h"
+#include "main.h"
 #include "error.h"
 #include "mesh-pb-constants.h"
 #include <pb_decode.h>
@@ -11,17 +12,6 @@
 // FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
 static SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
-#ifdef ARCH_PORTDUINO
-
-void LockingModule::SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes)
-{
-    concurrency::LockGuard g(spiLock);
-
-    Module::SPItransfer(cmd, reg, dataOut, dataIn, numBytes);
-}
-
-#else
-
 void LockingModule::SPIbeginTransaction()
 {
     spiLock->lock();
@@ -36,8 +26,6 @@ void LockingModule::SPIendTransaction()
     Module::SPIendTransaction();
 }
 
-#endif
-
 RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
                                      SPIClass &spi, PhysicalLayer *_iface)
     : NotifiedWorkerThread("RadioIf"), module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
@@ -100,10 +88,8 @@ bool RadioLibInterface::canSendImmediately()
         if (busyTx && (millis() - lastTxStart > 60000)) {
             DEBUG_MSG("Hardware Failure! busyTx for more than 60s\n");
             RECORD_CRITICALERROR(CriticalErrorCode_TRANSMIT_FAILED);
-#ifdef ARCH_ESP32
-            if (busyTx && (millis() - lastTxStart > 65000)) // After 5s more, reboot
-                ESP.restart();
-#endif
+            // reboot in 5 seconds when this condition occurs.
+            rebootAtMsec = lastTxStart + 65000;
         }
         if (busyRx)
             DEBUG_MSG("Can not send yet, busyRx\n");
@@ -317,7 +303,13 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
     void RadioLibInterface::handleReceiveInterrupt()
     {
         uint32_t xmitMsec;
-        assert(isReceiving);
+        
+        // when this is called, we should be in receive mode - if we are not, just jump out instead of bombing. Possible Race Condition?
+        if (!isReceiving) {
+            DEBUG_MSG("*** WAS_ASSERT *** handleReceiveInterrupt called when not in receive mode\n");
+            return;
+        }
+        
         isReceiving = false;
 
         // read the number of actually received bytes
@@ -393,6 +385,7 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
             int res = iface->startTransmit(radiobuf, numbytes);
             if (res != RADIOLIB_ERR_NONE) {
+                DEBUG_MSG("startTransmit failed, error=%d\n", res);
                 RECORD_CRITICALERROR(CriticalErrorCode_RADIO_SPI_BUG);
 
                 // This send failed, but make sure to 'complete' it properly

src/mesh/RadioLibInterface.h

@@ -1,10 +1,9 @@
 #pragma once
 
-#include "../concurrency/OSThread.h"
+#include "concurrency/NotifiedWorkerThread.h"
 #include "RadioInterface.h"
 #include "MeshPacketQueue.h"
 
-#define RADIOLIB_EXCLUDE_HTTP
 #include <RadioLib.h>
 
 // ESP32 has special rules about ISR code
@@ -41,12 +40,8 @@ class LockingModule : public Module
     {
     }
     
-#ifdef ARCH_PORTDUINO
-    void SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes) override;
-#else
     void SPIbeginTransaction() override;
     void SPIendTransaction() override;
-#endif
 };
 
 class RadioLibInterface : public RadioInterface, protected concurrency::NotifiedWorkerThread

src/mesh/ReliableRouter.cpp

@@ -63,7 +63,7 @@ bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
             sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
             DEBUG_MSG("acking a repeated want_ack packet\n");
         }
-    } else if (wasSeenRecently(p, false) && p->hop_limit == HOP_RELIABLE && !MeshModule::currentReply) {
+    } else if (wasSeenRecently(p, false) && p->hop_limit == HOP_RELIABLE && !MeshModule::currentReply && p->to != nodeDB.getNodeNum()) {
         // retransmission on broadcast has hop_limit still equal to HOP_RELIABLE
         DEBUG_MSG("Resending implicit ack for a repeated floodmsg\n");
         MeshPacket *tosend = packetPool.allocCopy(*p);
@@ -90,13 +90,16 @@ void ReliableRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
     NodeNum ourNode = getNodeNum();
 
-    if (p->to == ourNode) { // ignore ack/nak/want_ack packets that are not address to us (we only handle 0 hop reliability
-                            // - not DSR routing)
+    if (p->to == ourNode) { // ignore ack/nak/want_ack packets that are not address to us (we only handle 0 hop reliability)
         if (p->want_ack) {
             if (MeshModule::currentReply)
                 DEBUG_MSG("Some other module has replied to this message, no need for a 2nd ack\n");
             else
-                sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
+                if (p->which_payload_variant == MeshPacket_decoded_tag)
+                    sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
+                else
+                    // Send a 'NO_CHANNEL' error on the primary channel if want_ack packet destined for us cannot be decoded
+                    sendAckNak(Routing_Error_NO_CHANNEL, getFrom(p), p->id, channels.getPrimaryIndex());
         }
 
         // We consider an ack to be either a !routing packet with a request ID or a routing packet with !error
@@ -196,8 +199,7 @@ int32_t ReliableRouter::doRetransmissions()
                 DEBUG_MSG("Reliable send failed, returning a nak for fr=0x%x,to=0x%x,id=0x%x\n", p.packet->from, p.packet->to,
                           p.packet->id);
                 sendAckNak(Routing_Error_MAX_RETRANSMIT, getFrom(p.packet), p.packet->id, p.packet->channel);
-                // Note: we don't stop retransmission here, instead the Nak packet gets processed in sniffReceived - which
-                // allows the DSR version to still be able to look at the PendingPacket
+                // Note: we don't stop retransmission here, instead the Nak packet gets processed in sniffReceived
                 stopRetransmission(it->first);
                 stillValid = false; // just deleted it
             } else {

src/mesh/ReliableRouter.h

@@ -38,12 +38,6 @@ struct PendingPacket {
     /** Starts at NUM_RETRANSMISSIONS -1(normally 3) and counts down.  Once zero it will be removed from the list */
     uint8_t numRetransmissions = 0;
 
-    /** True if we have started trying to find a route - for DSR usage
-     * While trying to find a route we don't actually send the data packet.  We just leave it here pending until
-     * we have a route or we've failed to find one.
-     */
-    bool wantRoute = false;
-
     PendingPacket() {}
     explicit PendingPacket(MeshPacket *p);
 };

src/mesh/Router.cpp

@@ -2,6 +2,7 @@
 #include "Channels.h"
 #include "CryptoEngine.h"
 #include "NodeDB.h"
+#include "MeshRadio.h"
 #include "RTC.h"
 #include "configuration.h"
 #include "main.h"
@@ -11,7 +12,7 @@ extern "C" {
 #include "mesh/compression/unishox2.h"
 }
 
-#if HAS_WIFI
+#if HAS_WIFI || HAS_ETHERNET
 #include "mqtt/MQTT.h"
 #endif
 
@@ -21,7 +22,6 @@ extern "C" {
  * DONE: Implement basic interface and use it elsewhere in app
  * Add naive flooding mixin (& drop duplicate rx broadcasts), add tools for sending broadcasts with incrementing sequence #s
  * Add an optional adjacent node only 'send with ack' mixin.  If we timeout waiting for the ack, call handleAckTimeout(packet)
- * Add DSR mixin
  *
  **/
 
@@ -188,6 +188,18 @@ ErrorCode Router::send(MeshPacket *p)
 {
     assert(p->to != nodeDB.getNodeNum()); // should have already been handled by sendLocal
 
+    // Abort sending if we are violating the duty cycle
+    if (!config.lora.override_duty_cycle && myRegion->dutyCycle != 100) {
+      float hourlyTxPercent = airTime->utilizationTXPercent();
+      if (hourlyTxPercent > myRegion->dutyCycle) {
+          uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle); 
+          DEBUG_MSG("WARNING: Duty cycle limit exceeded. Aborting send for now, you can send again in %d minutes.\n", silentMinutes);
+          Routing_Error err = Routing_Error_DUTY_CYCLE_LIMIT;
+          abortSendAndNak(err, p);
+          return err;
+      }
+    }
+
     // PacketId nakId = p->decoded.which_ackVariant == SubPacket_fail_id_tag ? p->decoded.ackVariant.fail_id : 0;
     // assert(!nakId); // I don't think we ever send 0hop naks over the wire (other than to the phone), test that assumption with
     // assert
@@ -209,7 +221,7 @@ ErrorCode Router::send(MeshPacket *p)
     if (p->which_payload_variant == MeshPacket_decoded_tag) {
         ChannelIndex chIndex = p->channel; // keep as a local because we are about to change it
 
-#if HAS_WIFI
+#if HAS_WIFI || HAS_ETHERNET
         // check if we should send decrypted packets to mqtt
 
         // truth table:
@@ -240,7 +252,7 @@ ErrorCode Router::send(MeshPacket *p)
             return encodeResult; // FIXME - this isn't a valid ErrorCode
         }
 
-#if HAS_WIFI
+#if HAS_WIFI || HAS_ETHERNET
         // the packet is now encrypted.
         // check if we should send encrypted packets to mqtt
         if (mqtt && shouldActuallyEncrypt)

src/mesh/SX126xInterface.cpp

@@ -12,6 +12,7 @@ SX126xInterface<T>::SX126xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq,
                                  SPIClass &spi)
     : RadioLibInterface(cs, irq, rst, busy, spi, &lora), lora(&module)
 {
+    DEBUG_MSG("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
 }
 
 /// Initialise the Driver transport hardware and software.
@@ -25,11 +26,11 @@ bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
-#ifdef SX126X_RXEN                  // set not rx or tx mode
+#if defined(SX126X_RXEN) && (SX126X_RXEN != RADIOLIB_NC) // set not rx or tx mode
     digitalWrite(SX126X_RXEN, LOW); // Set low before becoming an output
     pinMode(SX126X_RXEN, OUTPUT);
 #endif
-#ifdef SX126X_TXEN
+#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC)
     digitalWrite(SX126X_TXEN, LOW);
     pinMode(SX126X_TXEN, OUTPUT);
 #endif
@@ -56,9 +57,9 @@ bool SX126xInterface<T>::init()
     // \todo Display actual typename of the adapter, not just `SX126x`
     DEBUG_MSG("SX126x init result %d\n", res);
 
-    DEBUG_MSG("Frequency set to %f\n", getFreq());    
-    DEBUG_MSG("Bandwidth set to %f\n", bw);    
-    DEBUG_MSG("Power output set to %d\n", power);    
+    DEBUG_MSG("Frequency set to %f\n", getFreq());
+    DEBUG_MSG("Bandwidth set to %f\n", bw);
+    DEBUG_MSG("Power output set to %d\n", power);
 
     // current limit was removed from module' ctor
     // override default value (60 mA)
@@ -66,10 +67,10 @@ bool SX126xInterface<T>::init()
     DEBUG_MSG("Current limit set to %f\n", currentLimit);
     DEBUG_MSG("Current limit set result %d\n", res);
 
-#ifdef SX126X_TXEN
+#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC)
     // lora.begin sets Dio2 as RF switch control, which is not true if we are manually controlling RX and TX
     if (res == RADIOLIB_ERR_NONE)
-        res = lora.setDio2AsRfSwitch(true);
+        res = lora.setDio2AsRfSwitch(false);
 #endif
 
 #if 0
@@ -81,11 +82,11 @@ bool SX126xInterface<T>::init()
 
     //if(crcLSB != 0x0f)
     //    RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
-    
+
     crcLSB = 0x5a;
     err = lora.writeRegister(SX126X_REG_CRC_POLYNOMIAL_LSB, &crcLSB, 1);
     if(err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);  
+        RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
 
     err = lora.readRegister(SX126X_REG_CRC_POLYNOMIAL_LSB, &crcLSB, 1);
     if(err != RADIOLIB_ERR_NONE)
@@ -144,8 +145,9 @@ bool SX126xInterface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    if (power > 22) // This chip has lower power limits than some
-        power = 22;
+    if (power > SX126X_MAX_POWER) // This chip has lower power limits than some
+        power = SX126X_MAX_POWER;
+
     err = lora.setOutputPower(power);
     assert(err == RADIOLIB_ERR_NONE);
 
@@ -164,14 +166,18 @@ template<typename T>
 void SX126xInterface<T>::setStandby()
 {
     checkNotification(); // handle any pending interrupts before we force standby
-    
+
     int err = lora.standby();
+
+    if (err != RADIOLIB_ERR_NONE)
+        DEBUG_MSG("SX126x standby failed with error %d\n", err);
+
     assert(err == RADIOLIB_ERR_NONE);
 
-#ifdef SX126X_RXEN // we have RXEN/TXEN control - turn off RX and TX power
+#if defined(SX126X_RXEN) && (SX126X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn off RX and TX power
     digitalWrite(SX126X_RXEN, LOW);
 #endif
-#ifdef SX126X_TXEN
+#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC)
     digitalWrite(SX126X_TXEN, LOW);
 #endif
 
@@ -196,10 +202,10 @@ void SX126xInterface<T>::addReceiveMetadata(MeshPacket *mp)
 template<typename T>
 void SX126xInterface<T>::configHardwareForSend()
 {
-#ifdef SX126X_TXEN // we have RXEN/TXEN control - turn on TX power / off RX power
+#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on TX power / off RX power
     digitalWrite(SX126X_TXEN, HIGH);
 #endif
-#ifdef SX126X_RXEN
+#if defined(SX126X_RXEN) && (SX126X_RXEN != RADIOLIB_NC)
     digitalWrite(SX126X_RXEN, LOW);
 #endif
 
@@ -218,13 +224,13 @@ void SX126xInterface<T>::startReceive()
 
     setStandby();
 
-#ifdef SX126X_RXEN // we have RXEN/TXEN control - turn on RX power / off TX power
+#if defined(SX126X_RXEN) && (SX126X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on RX power / off TX power
     digitalWrite(SX126X_RXEN, HIGH);
 #endif
-#ifdef SX126X_TXEN
+#if defined(SX126X_TXEN) && (SX126X_TXEN != RADIOLIB_NC)
     digitalWrite(SX126X_TXEN, LOW);
 #endif
-  
+
     // int err = lora.startReceive();
     int err = lora.startReceiveDutyCycleAuto(); // We use a 32 bit preamble so this should save some power by letting radio sit in
                                                 // standby mostly.
@@ -244,13 +250,13 @@ bool SX126xInterface<T>::isChannelActive()
     // check if we can detect a LoRa preamble on the current channel
     int16_t result;
 
-    setStandby(); 
+    setStandby();
     result = lora.scanChannel();
-    if (result == RADIOLIB_PREAMBLE_DETECTED) 
+    if (result == RADIOLIB_PREAMBLE_DETECTED)
         return true;
-    
+
     assert(result != RADIOLIB_ERR_WRONG_MODEM);
-    
+
     return false;
 }
 

src/mesh/SX1280Interface.cpp

@@ -0,0 +1,9 @@
+#include "configuration.h"
+#include "SX1280Interface.h"
+#include "error.h"
+
+SX1280Interface::SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
+                                 SPIClass &spi)
+    : SX128xInterface(cs, irq, rst, busy, spi)
+{
+}

src/mesh/SX1280Interface.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "SX128xInterface.h"
+
+/**
+ * Our adapter for SX1280 radios
+ */
+
+
+class SX1280Interface : public SX128xInterface<SX1280>
+{
+  public:
+    SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
+};

src/mesh/SX128xInterface.cpp

@@ -0,0 +1,256 @@
+#include "configuration.h"
+#include "SX128xInterface.h"
+#include "error.h"
+
+// Particular boards might define a different max power based on what their hardware can do
+#ifndef SX128X_MAX_POWER
+#define SX128X_MAX_POWER 13
+#endif
+
+template<typename T>
+SX128xInterface<T>::SX128xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
+                                 SPIClass &spi)
+    : RadioLibInterface(cs, irq, rst, busy, spi, &lora), lora(&module)
+{
+}
+
+/// Initialise the Driver transport hardware and software.
+/// Make sure the Driver is properly configured before calling init().
+/// \return true if initialisation succeeded.
+template<typename T>
+bool SX128xInterface<T>::init()
+{
+#ifdef SX128X_POWER_EN
+    digitalWrite(SX128X_POWER_EN, HIGH);
+    pinMode(SX128X_POWER_EN, OUTPUT);
+#endif
+
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // set not rx or tx mode
+    digitalWrite(SX128X_RXEN, LOW); // Set low before becoming an output
+    pinMode(SX128X_RXEN, OUTPUT);
+#endif
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
+    digitalWrite(SX128X_TXEN, LOW);
+    pinMode(SX128X_TXEN, OUTPUT);
+#endif
+
+    RadioLibInterface::init();
+
+    if (power == 0)
+        power = SX128X_MAX_POWER;
+
+    if (power > SX128X_MAX_POWER) // This chip has lower power limits than some
+        power = SX128X_MAX_POWER;
+
+    limitPower();
+
+    preambleLength = 12; // 12 is the default for this chip, 32 does not RX at all
+
+    int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength);
+    // \todo Display actual typename of the adapter, not just `SX128x`
+    DEBUG_MSG("SX128x init result %d\n", res);
+
+    DEBUG_MSG("Frequency set to %f\n", getFreq());    
+    DEBUG_MSG("Bandwidth set to %f\n", bw);    
+    DEBUG_MSG("Power output set to %d\n", power);    
+
+    if (res == RADIOLIB_ERR_NONE)
+        res = lora.setCRC(2);
+
+    if (res == RADIOLIB_ERR_NONE)
+        startReceive(); // start receiving
+
+    return res == RADIOLIB_ERR_NONE;
+}
+
+template<typename T>
+bool SX128xInterface<T>::reconfigure()
+{
+    RadioLibInterface::reconfigure();
+
+    // set mode to standby
+    setStandby();
+
+    // configure publicly accessible settings
+    int err = lora.setSpreadingFactor(sf);
+    if (err != RADIOLIB_ERR_NONE)
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
+
+    err = lora.setBandwidth(bw);
+    if (err != RADIOLIB_ERR_NONE)
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
+
+    err = lora.setCodingRate(cr);
+    if (err != RADIOLIB_ERR_NONE)
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
+
+    // Hmm - seems to lower SNR when the signal levels are high.  Leaving off for now...
+    // TODO: Confirm gain registers are okay now
+    // err = lora.setRxGain(true);
+    // assert(err == RADIOLIB_ERR_NONE);
+
+    err = lora.setSyncWord(syncWord);
+    assert(err == RADIOLIB_ERR_NONE);
+
+    err = lora.setPreambleLength(preambleLength);
+    assert(err == RADIOLIB_ERR_NONE);
+
+    err = lora.setFrequency(getFreq());
+    if (err != RADIOLIB_ERR_NONE)
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
+
+    if (power > SX128X_MAX_POWER) // This chip has lower power limits than some
+        power = SX128X_MAX_POWER;
+
+    err = lora.setOutputPower(power);
+    assert(err == RADIOLIB_ERR_NONE);
+
+    startReceive(); // restart receiving
+
+    return RADIOLIB_ERR_NONE;
+}
+
+template<typename T>
+void INTERRUPT_ATTR SX128xInterface<T>::disableInterrupt()
+{
+    lora.clearDio1Action();
+}
+
+template<typename T>
+bool SX128xInterface<T>::wideLora()
+{
+    return true;
+}
+
+template<typename T>
+void SX128xInterface<T>::setStandby()
+{
+    checkNotification(); // handle any pending interrupts before we force standby
+    
+    int err = lora.standby();
+
+    if (err != RADIOLIB_ERR_NONE)
+        DEBUG_MSG("SX128x standby failed with error %d\n", err);
+
+    assert(err == RADIOLIB_ERR_NONE);
+
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn off RX and TX power
+    digitalWrite(SX128X_RXEN, LOW);
+#endif
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
+    digitalWrite(SX128X_TXEN, LOW);
+#endif
+
+    isReceiving = false; // If we were receiving, not any more
+    disableInterrupt();
+    completeSending(); // If we were sending, not anymore
+}
+
+/**
+ * Add SNR data to received messages
+ */
+template<typename T>
+void SX128xInterface<T>::addReceiveMetadata(MeshPacket *mp)
+{
+    // DEBUG_MSG("PacketStatus %x\n", lora.getPacketStatus());
+    mp->rx_snr = lora.getSNR();
+    mp->rx_rssi = lround(lora.getRSSI());
+}
+
+/** We override to turn on transmitter power as needed.
+ */
+template<typename T>
+void SX128xInterface<T>::configHardwareForSend()
+{
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on TX power / off RX power
+    digitalWrite(SX128X_TXEN, HIGH);
+#endif
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC)
+    digitalWrite(SX128X_RXEN, LOW);
+#endif
+
+    RadioLibInterface::configHardwareForSend();
+}
+
+// For power draw measurements, helpful to force radio to stay sleeping
+// #define SLEEP_ONLY
+
+template<typename T>
+void SX128xInterface<T>::startReceive()
+{
+#ifdef SLEEP_ONLY
+    sleep();
+#else
+
+    setStandby();
+
+#if defined(SX128X_RXEN) && (SX128X_RXEN != RADIOLIB_NC) // we have RXEN/TXEN control - turn on RX power / off TX power
+    digitalWrite(SX128X_RXEN, HIGH);
+#endif
+#if defined(SX128X_TXEN) && (SX128X_TXEN != RADIOLIB_NC)
+    digitalWrite(SX128X_TXEN, LOW);
+#endif
+  
+    int err = lora.startReceive();
+
+    assert(err == RADIOLIB_ERR_NONE);
+
+    isReceiving = true;
+
+    // Must be done AFTER, starting transmit, because startTransmit clears (possibly stale) interrupt pending register bits
+    enableInterrupt(isrRxLevel0);
+#endif
+}
+
+/** Could we send right now (i.e. either not actively receving or transmitting)? */
+template<typename T>
+bool SX128xInterface<T>::isChannelActive()
+{
+    // check if we can detect a LoRa preamble on the current channel
+    int16_t result;
+
+    setStandby(); 
+    result = lora.scanChannel();
+    if (result == RADIOLIB_PREAMBLE_DETECTED) 
+        return true;
+    
+    assert(result != RADIOLIB_ERR_WRONG_MODEM);
+    
+    return false;
+}
+
+/** Could we send right now (i.e. either not actively receving or transmitting)? */
+template<typename T>
+bool SX128xInterface<T>::isActivelyReceiving()
+{
+#ifdef RADIOLIB_GODMODE
+    uint16_t irq = lora.getIrqStatus();
+    bool hasPreamble = (irq & RADIOLIB_SX128X_IRQ_HEADER_VALID);
+    return hasPreamble;
+#else
+    return isChannelActive();
+#endif
+}
+
+template<typename T>
+bool SX128xInterface<T>::sleep()
+{
+    // Not keeping config is busted - next time nrf52 board boots lora sending fails  tcxo related? - see datasheet
+    // \todo Display actual typename of the adapter, not just `SX128x`
+    DEBUG_MSG("SX128x entering sleep mode (FIXME, don't keep config)\n");
+    setStandby(); // Stop any pending operations
+
+    // turn off TCXO if it was powered
+    // FIXME - this isn't correct
+    // lora.setTCXO(0);
+
+    // put chipset into sleep mode (we've already disabled interrupts by now)
+    bool keepConfig = true;
+    lora.sleep(keepConfig); // Note: we do not keep the config, full reinit will be needed
+
+#ifdef SX128X_POWER_EN
+    digitalWrite(SX128X_POWER_EN, LOW);
+#endif
+
+    return true;
+}

src/mesh/SX128xInterface.h

@@ -0,0 +1,75 @@
+#pragma once
+
+#include "RadioLibInterface.h"
+
+/**
+ * \brief Adapter for SX128x radio family. Implements common logic for child classes.
+ * \tparam T RadioLib module type for SX128x: SX1280.
+ */
+template<class T>
+class SX128xInterface : public RadioLibInterface
+{
+  public:
+    SX128xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
+
+    /// Initialise the Driver transport hardware and software.
+    /// Make sure the Driver is properly configured before calling init().
+    /// \return true if initialisation succeeded.
+    virtual bool init() override;
+
+    virtual bool wideLora() override;
+
+    /// Apply any radio provisioning changes
+    /// Make sure the Driver is properly configured before calling init().
+    /// \return true if initialisation succeeded.
+    virtual bool reconfigure() override;
+
+    /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
+    virtual bool sleep() override;
+
+#ifdef RADIOLIB_GODMODE
+    bool isIRQPending() override { return lora.getIrqStatus() != 0; }
+#endif
+
+  protected:
+
+    /**
+     * Specific module instance 
+     */
+    T lora;
+
+    /**
+     * Glue functions called from ISR land
+     */
+    virtual void disableInterrupt() override;
+
+    /**
+     * Enable a particular ISR callback glue function
+     */
+    virtual void enableInterrupt(void (*callback)()) { lora.setDio1Action(callback); }
+
+    /** can we detect a LoRa preamble on the current channel? */
+    virtual bool isChannelActive() override;
+
+    /** are we actively receiving a packet (only called during receiving state) */
+    virtual bool isActivelyReceiving() override;
+
+    /**
+     * Start waiting to receive a message
+     */
+    virtual void startReceive() override;
+
+    /**
+     *  We override to turn on transmitter power as needed.
+     */
+    virtual void configHardwareForSend() override;
+
+    /**
+     * Add SNR data to received messages
+     */
+    virtual void addReceiveMetadata(MeshPacket *mp) override;
+
+    virtual void setStandby() override;
+
+  private:
+};

src/mesh/eth/ethClient.cpp

@@ -0,0 +1,148 @@
+#include "mesh/eth/ethClient.h"
+#include "NodeDB.h"
+#include "RTC.h"
+#include "concurrency/Periodic.h"
+#include <SPI.h>
+#include <RAK13800_W5100S.h>
+#include "target_specific.h"
+#include "mesh/eth/ethServerAPI.h"
+#include "mqtt/MQTT.h"
+
+#ifndef DISABLE_NTP
+#include <NTPClient.h>
+
+// NTP
+EthernetUDP ntpUDP;
+NTPClient timeClient(ntpUDP, config.network.ntp_server);
+uint32_t ntp_renew = 0;
+#endif
+
+bool ethStartupComplete = 0;
+
+using namespace concurrency;
+
+static Periodic *ethEvent;
+
+static int32_t reconnectETH()
+{
+    if (config.network.eth_enabled) {
+        Ethernet.maintain();
+        if (!ethStartupComplete) {
+            // Start web server
+            DEBUG_MSG("... Starting network services\n");
+
+#ifndef DISABLE_NTP
+            DEBUG_MSG("Starting NTP time client\n");
+            timeClient.begin();
+            timeClient.setUpdateInterval(60 * 60); // Update once an hour
+#endif            
+            // initWebServer();
+            initApiServer();
+
+            ethStartupComplete = true;
+        }
+
+        // FIXME this is kinda yucky, instead we should just have an observable for 'wifireconnected'
+        if (mqtt && !mqtt->connected()) {
+            mqtt->reconnect();
+        }
+    }
+
+#ifndef DISABLE_NTP
+    if (isEthernetAvailable() && (ntp_renew < millis())) {
+	    
+        DEBUG_MSG("Updating NTP time from %s\n", config.network.ntp_server);
+        if (timeClient.update()) {
+            DEBUG_MSG("NTP Request Success - Setting RTCQualityNTP if needed\n");
+
+            struct timeval tv;
+            tv.tv_sec = timeClient.getEpochTime();
+            tv.tv_usec = 0;
+
+            perhapsSetRTC(RTCQualityNTP, &tv);
+
+            ntp_renew = millis() + 43200 * 1000; // success, refresh every 12 hours
+
+        } else {
+            DEBUG_MSG("NTP Update failed\n");
+            ntp_renew = millis() + 300 * 1000; // failure, retry every 5 minutes
+        }
+    }
+#endif
+
+    return 5000; // every 5 seconds
+}
+
+// Startup Ethernet
+bool initEthernet()
+{
+    if (config.network.eth_enabled) {
+
+#ifdef PIN_ETHERNET_RESET
+        pinMode(PIN_ETHERNET_RESET, OUTPUT);
+        digitalWrite(PIN_ETHERNET_RESET, LOW);  // Reset Time.
+        delay(100);
+        digitalWrite(PIN_ETHERNET_RESET, HIGH);  // Reset Time.
+#endif
+
+        Ethernet.init( ETH_SPI_PORT, PIN_ETHERNET_SS );
+
+        uint8_t mac[6];
+
+        int status = 0;
+
+        //        createSSLCert();
+
+        getMacAddr(mac); // FIXME use the BLE MAC for now...
+
+        if (config.network.eth_mode == Config_NetworkConfig_EthMode_DHCP) {
+            DEBUG_MSG("starting Ethernet DHCP\n");
+            status = Ethernet.begin(mac);
+        } else if (config.network.eth_mode == Config_NetworkConfig_EthMode_STATIC) {
+            DEBUG_MSG("starting Ethernet Static\n");
+            Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.subnet);
+        } else {
+            DEBUG_MSG("Ethernet Disabled\n");
+            return false;
+        }
+
+        if (status == 0) {
+            if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+                DEBUG_MSG("Ethernet shield was not found.\n");
+                return false;
+            } else if (Ethernet.linkStatus() == LinkOFF) {
+                DEBUG_MSG("Ethernet cable is not connected.\n");
+                return false;
+            } else{
+                DEBUG_MSG("Unknown Ethernet error.\n");
+                return false;
+            }
+        } else {
+            DEBUG_MSG("Local IP %u.%u.%u.%u\n",Ethernet.localIP()[0], Ethernet.localIP()[1], Ethernet.localIP()[2], Ethernet.localIP()[3]);
+            DEBUG_MSG("Subnet Mask %u.%u.%u.%u\n",Ethernet.subnetMask()[0], Ethernet.subnetMask()[1], Ethernet.subnetMask()[2], Ethernet.subnetMask()[3]);
+            DEBUG_MSG("Gateway IP %u.%u.%u.%u\n",Ethernet.gatewayIP()[0], Ethernet.gatewayIP()[1], Ethernet.gatewayIP()[2], Ethernet.gatewayIP()[3]);
+            DEBUG_MSG("DNS Server IP %u.%u.%u.%u\n",Ethernet.dnsServerIP()[0], Ethernet.dnsServerIP()[1], Ethernet.dnsServerIP()[2], Ethernet.dnsServerIP()[3]);
+        }
+
+        ethEvent = new Periodic("ethConnect", reconnectETH);
+
+        return true;
+
+    } else {
+        DEBUG_MSG("Not using Ethernet\n");
+        return false;
+    }
+}
+
+bool isEthernetAvailable() {
+
+    if (!config.network.eth_enabled) {
+        return false;
+    } else if (Ethernet.hardwareStatus() == EthernetNoHardware) {
+        return false;
+    } else if (Ethernet.linkStatus() == LinkOFF) {
+        return false;
+    } else {
+        return true;
+    }
+}

src/mesh/eth/ethClient.h

@@ -0,0 +1,8 @@
+#pragma once
+
+#include "configuration.h"
+#include <Arduino.h>
+#include <functional>
+
+bool initEthernet();
+bool isEthernetAvailable();

src/mesh/eth/ethServerAPI.cpp

@@ -0,0 +1,82 @@
+#include "ethServerAPI.h"
+#include "configuration.h"
+#include <Arduino.h>
+
+static ethServerPort *apiPort;
+
+void initApiServer(int port)
+{
+    // Start API server on port 4403
+    if (!apiPort) {
+        apiPort = new ethServerPort(port);
+        DEBUG_MSG("API server listening on TCP port %d\n", port);
+        apiPort->init();
+    }
+}
+
+ethServerAPI::ethServerAPI(EthernetClient &_client) : StreamAPI(&client), client(_client)
+{
+    DEBUG_MSG("Incoming ethernet connection\n");
+}
+
+ethServerAPI::~ethServerAPI()
+{
+    client.stop();
+
+    // FIXME - delete this if the client dropps the connection!
+}
+
+/// override close to also shutdown the TCP link
+void ethServerAPI::close()
+{
+    client.stop(); // drop tcp connection
+    StreamAPI::close();
+}
+
+/// Check the current underlying physical link to see if the client is currently connected
+bool ethServerAPI::checkIsConnected()
+{
+    return client.connected();
+}
+
+int32_t ethServerAPI::runOnce()
+{
+    if (client.connected()) {
+        return StreamAPI::runOnce();
+    } else {
+        DEBUG_MSG("Client dropped connection, suspending API service\n");
+        enabled = false; // we no longer need to run
+        return 0;
+    }
+}
+
+/// If an api server is running, we try to spit out debug 'serial' characters there
+void ethServerPort::debugOut(char c)
+{
+    if (apiPort && apiPort->openAPI)
+        apiPort->openAPI->debugOut(c);
+}
+
+
+ethServerPort::ethServerPort(int port) : EthernetServer(port), concurrency::OSThread("ApiServer") {}
+
+void ethServerPort::init()
+{
+    begin();
+}
+
+int32_t ethServerPort::runOnce()
+{
+    auto client = available();
+    if (client) {
+        // Close any previous connection (see FIXME in header file)
+        if (openAPI) {
+            DEBUG_MSG("Force closing previous TCP connection\n");
+            delete openAPI;
+        }
+
+        openAPI = new ethServerAPI(client);
+    }
+
+    return 100; // only check occasionally for incoming connections
+}

src/mesh/eth/ethServerAPI.h

@@ -0,0 +1,58 @@
+#pragma once
+
+#include "StreamAPI.h"
+#include <RAK13800_W5100S.h>
+
+/**
+ * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs
+ * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs).
+ */
+class ethServerAPI : public StreamAPI
+{
+  private:
+    EthernetClient client;
+
+  public:
+    explicit ethServerAPI(EthernetClient &_client);
+
+    virtual ~ethServerAPI();
+
+    /// override close to also shutdown the TCP link
+    virtual void close();
+
+  protected:
+    /// We override this method to prevent publishing EVENT_SERIAL_CONNECTED/DISCONNECTED for wifi links (we want the board to
+    /// stay in the POWERED state to prevent disabling wifi)
+    virtual void onConnectionChanged(bool connected) override {}
+
+    virtual int32_t runOnce() override; // Check for dropped client connections
+
+    /// Check the current underlying physical link to see if the client is currently connected
+    virtual bool checkIsConnected() override;
+};
+
+/**
+ * Listens for incoming connections and does accepts and creates instances of WiFiServerAPI as needed
+ */
+class ethServerPort : public EthernetServer, private concurrency::OSThread
+{
+    /** The currently open port
+     *
+     * FIXME: We currently only allow one open TCP connection at a time, because we depend on the loop() call in this class to
+     * delegate to the worker.  Once coroutines are implemented we can relax this restriction.
+     */
+    ethServerAPI *openAPI = NULL;
+
+  public:
+    explicit ethServerPort(int port);
+
+    void init();
+
+    /// If an api server is running, we try to spit out debug 'serial' characters there
+    static void debugOut(char c);
+    
+  protected:
+    int32_t runOnce() override;
+};
+
+void initApiServer(int port=4403);

src/mesh/generated/admin.pb.h

@@ -32,7 +32,8 @@ typedef enum _AdminMessage_ModuleConfigType {
     AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG = 3, 
     AdminMessage_ModuleConfigType_RANGETEST_CONFIG = 4, 
     AdminMessage_ModuleConfigType_TELEMETRY_CONFIG = 5, 
-    AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG = 6 
+    AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG = 6, 
+    AdminMessage_ModuleConfigType_AUDIO_CONFIG = 7 
 } AdminMessage_ModuleConfigType;
 
 /* Struct definitions */
@@ -81,10 +82,11 @@ typedef struct _AdminMessage {
         ModuleConfig set_module_config;
         /* Set the Canned Message Module messages text. */
         char set_canned_message_module_messages[201];
-        /* Sent immediatly after a config change has been sent to ensure comms, if this is not recieved, the config will be reverted after 10 mins */
-        bool confirm_set_config;
-        /* Sent immediatly after a config change has been sent to ensure comms, if this is not recieved, the config will be reverted after 10 mins */
-        bool confirm_set_module_config;
+        /* Begins an edit transaction for config, module config, owner, and channel settings changes
+     This will delay the standard *implicit* save to the file system and subsequent reboot behavior until committed (commit_edit_settings) */
+        bool begin_edit_settings;
+        /* Commits an open transaction for any edits made to config, module config, owner, and channel settings */
+        bool commit_edit_settings;
         /* Setting channels/radio config remotely carries the risk that you might send an invalid config and the radio never talks to your mesh again.
      Therefore if setting either of these properties remotely, you must send a confirm_xxx message within 10 minutes.
      If you fail to do so, the radio will assume loss of comms and revert your changes.
@@ -116,8 +118,8 @@ typedef struct _AdminMessage {
 #define _AdminMessage_ConfigType_ARRAYSIZE ((AdminMessage_ConfigType)(AdminMessage_ConfigType_BLUETOOTH_CONFIG+1))
 
 #define _AdminMessage_ModuleConfigType_MIN AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _AdminMessage_ModuleConfigType_MAX AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG
-#define _AdminMessage_ModuleConfigType_ARRAYSIZE ((AdminMessage_ModuleConfigType)(AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG+1))
+#define _AdminMessage_ModuleConfigType_MAX AdminMessage_ModuleConfigType_AUDIO_CONFIG
+#define _AdminMessage_ModuleConfigType_ARRAYSIZE ((AdminMessage_ModuleConfigType)(AdminMessage_ModuleConfigType_AUDIO_CONFIG+1))
 
 
 #ifdef __cplusplus
@@ -146,8 +148,8 @@ extern "C" {
 #define AdminMessage_set_config_tag              34
 #define AdminMessage_set_module_config_tag       35
 #define AdminMessage_set_canned_message_module_messages_tag 36
-#define AdminMessage_confirm_set_config_tag      64
-#define AdminMessage_confirm_set_module_config_tag 65
+#define AdminMessage_begin_edit_settings_tag     64
+#define AdminMessage_commit_edit_settings_tag    65
 #define AdminMessage_confirm_set_channel_tag     66
 #define AdminMessage_confirm_set_radio_tag       67
 #define AdminMessage_reboot_ota_seconds_tag      95
@@ -176,8 +178,8 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_channel,set_channel),  3
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_config,set_config),  34) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_module_config,set_module_config),  35) \
 X(a, STATIC,   ONEOF,    STRING,   (payload_variant,set_canned_message_module_messages,set_canned_message_module_messages),  36) \
-X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,confirm_set_config,confirm_set_config),  64) \
-X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,confirm_set_module_config,confirm_set_module_config),  65) \
+X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,begin_edit_settings,begin_edit_settings),  64) \
+X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,commit_edit_settings,commit_edit_settings),  65) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,confirm_set_channel,confirm_set_channel),  66) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,confirm_set_radio,confirm_set_radio),  67) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_ota_seconds,reboot_ota_seconds),  95) \

src/mesh/generated/apponly.pb.h

@@ -54,7 +54,7 @@ extern const pb_msgdesc_t ChannelSet_msg;
 #define ChannelSet_fields &ChannelSet_msg
 
 /* Maximum encoded size of messages (where known) */
-#define ChannelSet_size                          581
+#define ChannelSet_size                          584
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/config.pb.c

@@ -21,6 +21,9 @@ PB_BIND(Config_PowerConfig, Config_PowerConfig, AUTO)
 PB_BIND(Config_NetworkConfig, Config_NetworkConfig, AUTO)
 
 
+PB_BIND(Config_NetworkConfig_IpV4Config, Config_NetworkConfig_IpV4Config, AUTO)
+
+
 PB_BIND(Config_DisplayConfig, Config_DisplayConfig, AUTO)
 
 
@@ -39,3 +42,4 @@ PB_BIND(Config_BluetoothConfig, Config_BluetoothConfig, AUTO)
 
 
 
+

src/mesh/generated/config.pb.h

@@ -31,11 +31,10 @@ typedef enum _Config_PositionConfig_PositionFlags {
     Config_PositionConfig_PositionFlags_SPEED = 512 
 } Config_PositionConfig_PositionFlags;
 
-typedef enum _Config_NetworkConfig_WiFiMode { 
-    Config_NetworkConfig_WiFiMode_CLIENT = 0, 
-    Config_NetworkConfig_WiFiMode_ACCESS_POINT = 1, 
-    Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN = 2 
-} Config_NetworkConfig_WiFiMode;
+typedef enum _Config_NetworkConfig_EthMode { 
+    Config_NetworkConfig_EthMode_DHCP = 0, 
+    Config_NetworkConfig_EthMode_STATIC = 1 
+} Config_NetworkConfig_EthMode;
 
 typedef enum _Config_DisplayConfig_GpsCoordinateFormat { 
     Config_DisplayConfig_GpsCoordinateFormat_DEC = 0, 
@@ -51,6 +50,12 @@ typedef enum _Config_DisplayConfig_DisplayUnits {
     Config_DisplayConfig_DisplayUnits_IMPERIAL = 1 
 } Config_DisplayConfig_DisplayUnits;
 
+typedef enum _Config_DisplayConfig_OledType { 
+    Config_DisplayConfig_OledType_OLED_AUTO = 0, 
+    Config_DisplayConfig_OledType_OLED_SSD1306 = 1, 
+    Config_DisplayConfig_OledType_OLED_SH1106 = 2 
+} Config_DisplayConfig_OledType;
+
 typedef enum _Config_LoRaConfig_RegionCode { 
     Config_LoRaConfig_RegionCode_UNSET = 0, 
     Config_LoRaConfig_RegionCode_US = 1, 
@@ -64,7 +69,8 @@ typedef enum _Config_LoRaConfig_RegionCode {
     Config_LoRaConfig_RegionCode_RU = 9, 
     Config_LoRaConfig_RegionCode_IN = 10, 
     Config_LoRaConfig_RegionCode_NZ_865 = 11, 
-    Config_LoRaConfig_RegionCode_TH = 12 
+    Config_LoRaConfig_RegionCode_TH = 12, 
+    Config_LoRaConfig_RegionCode_LORA_24 = 13 
 } Config_LoRaConfig_RegionCode;
 
 typedef enum _Config_LoRaConfig_ModemPreset { 
@@ -94,6 +100,8 @@ typedef struct _Config_DeviceConfig {
     Config_DeviceConfig_Role role;
     bool serial_enabled;
     bool debug_log_enabled;
+    uint32_t button_gpio;
+    uint32_t buzzer_gpio;
 } Config_DeviceConfig;
 
 typedef struct _Config_DisplayConfig { 
@@ -103,6 +111,7 @@ typedef struct _Config_DisplayConfig {
     bool compass_north_top;
     bool flip_screen;
     Config_DisplayConfig_DisplayUnits units;
+    Config_DisplayConfig_OledType oled;
 } Config_DisplayConfig;
 
 typedef struct _Config_LoRaConfig { 
@@ -116,18 +125,18 @@ typedef struct _Config_LoRaConfig {
     uint32_t hop_limit;
     bool tx_enabled;
     int8_t tx_power;
-    uint8_t channel_num;
+    uint16_t channel_num;
+    bool override_duty_cycle;
     pb_size_t ignore_incoming_count;
     uint32_t ignore_incoming[3];
 } Config_LoRaConfig;
 
-typedef struct _Config_NetworkConfig { 
-    bool wifi_enabled;
-    Config_NetworkConfig_WiFiMode wifi_mode;
-    char wifi_ssid[33];
-    char wifi_psk[64];
-    char ntp_server[33];
-} Config_NetworkConfig;
+typedef struct _Config_NetworkConfig_IpV4Config { 
+    uint32_t ip;
+    uint32_t gateway;
+    uint32_t subnet;
+    uint32_t dns;
+} Config_NetworkConfig_IpV4Config;
 
 typedef struct _Config_PositionConfig { 
     uint32_t position_broadcast_secs;
@@ -137,6 +146,8 @@ typedef struct _Config_PositionConfig {
     uint32_t gps_update_interval;
     uint32_t gps_attempt_time;
     uint32_t position_flags;
+    uint32_t rx_gpio;
+    uint32_t tx_gpio;
 } Config_PositionConfig;
 
 typedef struct _Config_PowerConfig { 
@@ -150,6 +161,17 @@ typedef struct _Config_PowerConfig {
     uint32_t min_wake_secs;
 } Config_PowerConfig;
 
+typedef struct _Config_NetworkConfig { 
+    bool wifi_enabled;
+    char wifi_ssid[33];
+    char wifi_psk[64];
+    char ntp_server[33];
+    bool eth_enabled;
+    Config_NetworkConfig_EthMode eth_mode;
+    bool has_ipv4_config;
+    Config_NetworkConfig_IpV4Config ipv4_config;
+} Config_NetworkConfig;
+
 typedef struct _Config { 
     pb_size_t which_payload_variant;
     union {
@@ -173,9 +195,9 @@ typedef struct _Config {
 #define _Config_PositionConfig_PositionFlags_MAX Config_PositionConfig_PositionFlags_SPEED
 #define _Config_PositionConfig_PositionFlags_ARRAYSIZE ((Config_PositionConfig_PositionFlags)(Config_PositionConfig_PositionFlags_SPEED+1))
 
-#define _Config_NetworkConfig_WiFiMode_MIN Config_NetworkConfig_WiFiMode_CLIENT
-#define _Config_NetworkConfig_WiFiMode_MAX Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN
-#define _Config_NetworkConfig_WiFiMode_ARRAYSIZE ((Config_NetworkConfig_WiFiMode)(Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN+1))
+#define _Config_NetworkConfig_EthMode_MIN Config_NetworkConfig_EthMode_DHCP
+#define _Config_NetworkConfig_EthMode_MAX Config_NetworkConfig_EthMode_STATIC
+#define _Config_NetworkConfig_EthMode_ARRAYSIZE ((Config_NetworkConfig_EthMode)(Config_NetworkConfig_EthMode_STATIC+1))
 
 #define _Config_DisplayConfig_GpsCoordinateFormat_MIN Config_DisplayConfig_GpsCoordinateFormat_DEC
 #define _Config_DisplayConfig_GpsCoordinateFormat_MAX Config_DisplayConfig_GpsCoordinateFormat_OSGR
@@ -185,9 +207,13 @@ typedef struct _Config {
 #define _Config_DisplayConfig_DisplayUnits_MAX Config_DisplayConfig_DisplayUnits_IMPERIAL
 #define _Config_DisplayConfig_DisplayUnits_ARRAYSIZE ((Config_DisplayConfig_DisplayUnits)(Config_DisplayConfig_DisplayUnits_IMPERIAL+1))
 
+#define _Config_DisplayConfig_OledType_MIN Config_DisplayConfig_OledType_OLED_AUTO
+#define _Config_DisplayConfig_OledType_MAX Config_DisplayConfig_OledType_OLED_SH1106
+#define _Config_DisplayConfig_OledType_ARRAYSIZE ((Config_DisplayConfig_OledType)(Config_DisplayConfig_OledType_OLED_SH1106+1))
+
 #define _Config_LoRaConfig_RegionCode_MIN Config_LoRaConfig_RegionCode_UNSET
-#define _Config_LoRaConfig_RegionCode_MAX Config_LoRaConfig_RegionCode_TH
-#define _Config_LoRaConfig_RegionCode_ARRAYSIZE ((Config_LoRaConfig_RegionCode)(Config_LoRaConfig_RegionCode_TH+1))
+#define _Config_LoRaConfig_RegionCode_MAX Config_LoRaConfig_RegionCode_LORA_24
+#define _Config_LoRaConfig_RegionCode_ARRAYSIZE ((Config_LoRaConfig_RegionCode)(Config_LoRaConfig_RegionCode_LORA_24+1))
 
 #define _Config_LoRaConfig_ModemPreset_MIN Config_LoRaConfig_ModemPreset_LONG_FAST
 #define _Config_LoRaConfig_ModemPreset_MAX Config_LoRaConfig_ModemPreset_SHORT_FAST
@@ -204,20 +230,22 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define Config_init_default                      {0, {Config_DeviceConfig_init_default}}
-#define Config_DeviceConfig_init_default         {_Config_DeviceConfig_Role_MIN, 0, 0}
-#define Config_PositionConfig_init_default       {0, 0, 0, 0, 0, 0, 0}
+#define Config_DeviceConfig_init_default         {_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0}
+#define Config_PositionConfig_init_default       {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_default          {0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_NetworkConfig_init_default        {0, _Config_NetworkConfig_WiFiMode_MIN, "", "", ""}
-#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN}
-#define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, {0, 0, 0}}
+#define Config_NetworkConfig_init_default        {0, "", "", "", 0, _Config_NetworkConfig_EthMode_MIN, false, Config_NetworkConfig_IpV4Config_init_default}
+#define Config_NetworkConfig_IpV4Config_init_default {0, 0, 0, 0}
+#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN}
+#define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
 #define Config_BluetoothConfig_init_default      {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
 #define Config_init_zero                         {0, {Config_DeviceConfig_init_zero}}
-#define Config_DeviceConfig_init_zero            {_Config_DeviceConfig_Role_MIN, 0, 0}
-#define Config_PositionConfig_init_zero          {0, 0, 0, 0, 0, 0, 0}
+#define Config_DeviceConfig_init_zero            {_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0}
+#define Config_PositionConfig_init_zero          {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_zero             {0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_NetworkConfig_init_zero           {0, _Config_NetworkConfig_WiFiMode_MIN, "", "", ""}
-#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN}
-#define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, {0, 0, 0}}
+#define Config_NetworkConfig_init_zero           {0, "", "", "", 0, _Config_NetworkConfig_EthMode_MIN, false, Config_NetworkConfig_IpV4Config_init_zero}
+#define Config_NetworkConfig_IpV4Config_init_zero {0, 0, 0, 0}
+#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _Config_DisplayConfig_DisplayUnits_MIN, _Config_DisplayConfig_OledType_MIN}
+#define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, {0, 0, 0}}
 #define Config_BluetoothConfig_init_zero         {0, _Config_BluetoothConfig_PairingMode_MIN, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
@@ -227,12 +255,15 @@ extern "C" {
 #define Config_DeviceConfig_role_tag             1
 #define Config_DeviceConfig_serial_enabled_tag   2
 #define Config_DeviceConfig_debug_log_enabled_tag 3
+#define Config_DeviceConfig_button_gpio_tag      4
+#define Config_DeviceConfig_buzzer_gpio_tag      5
 #define Config_DisplayConfig_screen_on_secs_tag  1
 #define Config_DisplayConfig_gps_format_tag      2
 #define Config_DisplayConfig_auto_screen_carousel_secs_tag 3
 #define Config_DisplayConfig_compass_north_top_tag 4
 #define Config_DisplayConfig_flip_screen_tag     5
 #define Config_DisplayConfig_units_tag           6
+#define Config_DisplayConfig_oled_tag            7
 #define Config_LoRaConfig_use_preset_tag         1
 #define Config_LoRaConfig_modem_preset_tag       2
 #define Config_LoRaConfig_bandwidth_tag          3
@@ -244,12 +275,12 @@ extern "C" {
 #define Config_LoRaConfig_tx_enabled_tag         9
 #define Config_LoRaConfig_tx_power_tag           10
 #define Config_LoRaConfig_channel_num_tag        11
+#define Config_LoRaConfig_override_duty_cycle_tag 12
 #define Config_LoRaConfig_ignore_incoming_tag    103
-#define Config_NetworkConfig_wifi_enabled_tag    1
-#define Config_NetworkConfig_wifi_mode_tag       2
-#define Config_NetworkConfig_wifi_ssid_tag       3
-#define Config_NetworkConfig_wifi_psk_tag        4
-#define Config_NetworkConfig_ntp_server_tag      5
+#define Config_NetworkConfig_IpV4Config_ip_tag   1
+#define Config_NetworkConfig_IpV4Config_gateway_tag 2
+#define Config_NetworkConfig_IpV4Config_subnet_tag 3
+#define Config_NetworkConfig_IpV4Config_dns_tag  4
 #define Config_PositionConfig_position_broadcast_secs_tag 1
 #define Config_PositionConfig_position_broadcast_smart_enabled_tag 2
 #define Config_PositionConfig_fixed_position_tag 3
@@ -257,6 +288,8 @@ extern "C" {
 #define Config_PositionConfig_gps_update_interval_tag 5
 #define Config_PositionConfig_gps_attempt_time_tag 6
 #define Config_PositionConfig_position_flags_tag 7
+#define Config_PositionConfig_rx_gpio_tag        8
+#define Config_PositionConfig_tx_gpio_tag        9
 #define Config_PowerConfig_is_power_saving_tag   1
 #define Config_PowerConfig_on_battery_shutdown_after_secs_tag 2
 #define Config_PowerConfig_adc_multiplier_override_tag 3
@@ -265,6 +298,13 @@ extern "C" {
 #define Config_PowerConfig_sds_secs_tag          6
 #define Config_PowerConfig_ls_secs_tag           7
 #define Config_PowerConfig_min_wake_secs_tag     8
+#define Config_NetworkConfig_wifi_enabled_tag    1
+#define Config_NetworkConfig_wifi_ssid_tag       3
+#define Config_NetworkConfig_wifi_psk_tag        4
+#define Config_NetworkConfig_ntp_server_tag      5
+#define Config_NetworkConfig_eth_enabled_tag     6
+#define Config_NetworkConfig_eth_mode_tag        7
+#define Config_NetworkConfig_ipv4_config_tag     8
 #define Config_device_tag                        1
 #define Config_position_tag                      2
 #define Config_power_tag                         3
@@ -295,7 +335,9 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,bluetooth,payload_variant.bl
 #define Config_DeviceConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UENUM,    role,              1) \
 X(a, STATIC,   SINGULAR, BOOL,     serial_enabled,    2) \
-X(a, STATIC,   SINGULAR, BOOL,     debug_log_enabled,   3)
+X(a, STATIC,   SINGULAR, BOOL,     debug_log_enabled,   3) \
+X(a, STATIC,   SINGULAR, UINT32,   button_gpio,       4) \
+X(a, STATIC,   SINGULAR, UINT32,   buzzer_gpio,       5)
 #define Config_DeviceConfig_CALLBACK NULL
 #define Config_DeviceConfig_DEFAULT NULL
 
@@ -306,7 +348,9 @@ X(a, STATIC,   SINGULAR, BOOL,     fixed_position,    3) \
 X(a, STATIC,   SINGULAR, BOOL,     gps_enabled,       4) \
 X(a, STATIC,   SINGULAR, UINT32,   gps_update_interval,   5) \
 X(a, STATIC,   SINGULAR, UINT32,   gps_attempt_time,   6) \
-X(a, STATIC,   SINGULAR, UINT32,   position_flags,    7)
+X(a, STATIC,   SINGULAR, UINT32,   position_flags,    7) \
+X(a, STATIC,   SINGULAR, UINT32,   rx_gpio,           8) \
+X(a, STATIC,   SINGULAR, UINT32,   tx_gpio,           9)
 #define Config_PositionConfig_CALLBACK NULL
 #define Config_PositionConfig_DEFAULT NULL
 
@@ -324,12 +368,23 @@ X(a, STATIC,   SINGULAR, UINT32,   min_wake_secs,     8)
 
 #define Config_NetworkConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BOOL,     wifi_enabled,      1) \
-X(a, STATIC,   SINGULAR, UENUM,    wifi_mode,         2) \
 X(a, STATIC,   SINGULAR, STRING,   wifi_ssid,         3) \
 X(a, STATIC,   SINGULAR, STRING,   wifi_psk,          4) \
-X(a, STATIC,   SINGULAR, STRING,   ntp_server,        5)
+X(a, STATIC,   SINGULAR, STRING,   ntp_server,        5) \
+X(a, STATIC,   SINGULAR, BOOL,     eth_enabled,       6) \
+X(a, STATIC,   SINGULAR, UENUM,    eth_mode,          7) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  ipv4_config,       8)
 #define Config_NetworkConfig_CALLBACK NULL
 #define Config_NetworkConfig_DEFAULT NULL
+#define Config_NetworkConfig_ipv4_config_MSGTYPE Config_NetworkConfig_IpV4Config
+
+#define Config_NetworkConfig_IpV4Config_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, FIXED32,  ip,                1) \
+X(a, STATIC,   SINGULAR, FIXED32,  gateway,           2) \
+X(a, STATIC,   SINGULAR, FIXED32,  subnet,            3) \
+X(a, STATIC,   SINGULAR, FIXED32,  dns,               4)
+#define Config_NetworkConfig_IpV4Config_CALLBACK NULL
+#define Config_NetworkConfig_IpV4Config_DEFAULT NULL
 
 #define Config_DisplayConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   screen_on_secs,    1) \
@@ -337,7 +392,8 @@ X(a, STATIC,   SINGULAR, UENUM,    gps_format,        2) \
 X(a, STATIC,   SINGULAR, UINT32,   auto_screen_carousel_secs,   3) \
 X(a, STATIC,   SINGULAR, BOOL,     compass_north_top,   4) \
 X(a, STATIC,   SINGULAR, BOOL,     flip_screen,       5) \
-X(a, STATIC,   SINGULAR, UENUM,    units,             6)
+X(a, STATIC,   SINGULAR, UENUM,    units,             6) \
+X(a, STATIC,   SINGULAR, UENUM,    oled,              7)
 #define Config_DisplayConfig_CALLBACK NULL
 #define Config_DisplayConfig_DEFAULT NULL
 
@@ -353,6 +409,7 @@ X(a, STATIC,   SINGULAR, UINT32,   hop_limit,         8) \
 X(a, STATIC,   SINGULAR, BOOL,     tx_enabled,        9) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,         10) \
 X(a, STATIC,   SINGULAR, UINT32,   channel_num,      11) \
+X(a, STATIC,   SINGULAR, BOOL,     override_duty_cycle,  12) \
 X(a, STATIC,   REPEATED, UINT32,   ignore_incoming, 103)
 #define Config_LoRaConfig_CALLBACK NULL
 #define Config_LoRaConfig_DEFAULT NULL
@@ -369,6 +426,7 @@ extern const pb_msgdesc_t Config_DeviceConfig_msg;
 extern const pb_msgdesc_t Config_PositionConfig_msg;
 extern const pb_msgdesc_t Config_PowerConfig_msg;
 extern const pb_msgdesc_t Config_NetworkConfig_msg;
+extern const pb_msgdesc_t Config_NetworkConfig_IpV4Config_msg;
 extern const pb_msgdesc_t Config_DisplayConfig_msg;
 extern const pb_msgdesc_t Config_LoRaConfig_msg;
 extern const pb_msgdesc_t Config_BluetoothConfig_msg;
@@ -379,19 +437,21 @@ extern const pb_msgdesc_t Config_BluetoothConfig_msg;
 #define Config_PositionConfig_fields &Config_PositionConfig_msg
 #define Config_PowerConfig_fields &Config_PowerConfig_msg
 #define Config_NetworkConfig_fields &Config_NetworkConfig_msg
+#define Config_NetworkConfig_IpV4Config_fields &Config_NetworkConfig_IpV4Config_msg
 #define Config_DisplayConfig_fields &Config_DisplayConfig_msg
 #define Config_LoRaConfig_fields &Config_LoRaConfig_msg
 #define Config_BluetoothConfig_fields &Config_BluetoothConfig_msg
 
 /* Maximum encoded size of messages (where known) */
 #define Config_BluetoothConfig_size              10
-#define Config_DeviceConfig_size                 6
-#define Config_DisplayConfig_size                20
-#define Config_LoRaConfig_size                   67
-#define Config_NetworkConfig_size                137
-#define Config_PositionConfig_size               30
+#define Config_DeviceConfig_size                 18
+#define Config_DisplayConfig_size                22
+#define Config_LoRaConfig_size                   70
+#define Config_NetworkConfig_IpV4Config_size     20
+#define Config_NetworkConfig_size                161
+#define Config_PositionConfig_size               42
 #define Config_PowerConfig_size                  43
-#define Config_size                              140
+#define Config_size                              164
 
 #ifdef __cplusplus
 } /* extern "C" */