Update ESP32Bluetooth.cpp (#1625)

* Update ESP32Bluetooth.cpp

* Update ESP32Bluetooth.h

.github/workflows/main_matrix.yml

@@ -38,8 +38,10 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+        # - board: pico
           
     runs-on: ubuntu-latest
     steps:
@@ -95,6 +97,7 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
 
@@ -123,7 +126,6 @@ jobs:
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio adafruit-nrfutil littlefs-python
-          pip install -U --pre meshtastic
 
       - name: Upgrade platformio
         run: |
@@ -194,7 +196,6 @@ jobs:
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio adafruit-nrfutil
-          pip install -U --pre meshtastic
 
       - name: Upgrade platformio
         run: |
@@ -216,6 +217,60 @@ jobs:
             release/*.elf
           retention-days: 90
 
+  build-rpi2040:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: pico
+
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v1
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Build Raspberry Pi 2040
+        run: ./bin/build-rpi2040.sh ${{ matrix.board }}
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v2
+        with:
+          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf
+          retention-days: 90
+
   build-native:
     runs-on: ubuntu-latest
     steps:
@@ -287,7 +342,7 @@ jobs:
 
   gather-artifacts:
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-nrf52, build-native]
+    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -348,3 +403,88 @@ jobs:
           artifacts-branch: device
           artifacts-dir: pr
           artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [gather-artifacts, after-checks]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2
+          
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - uses: actions/download-artifact@v2
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: ./output
+
+      - name: Zip firmware
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - uses: actions/download-artifact@v2
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./elfs
+      
+      - name: Zip Elfs
+        run: zip -j -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: Meshtastic Device ${{ steps.version.outputs.version }} alpha - Public Preview
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+          
+      - name: Commit updated version.properties
+        id: commit_updated
+        run: |
+          git config --global user.name 'thebentern'
+          git config --global user.email 'benmmeadors@gmail.com'
+          git remote set-url origin https://x-access-token:${{ secrets.ARTIFACTS_TOKEN }}@github.com/${{ github.repository }}
+          git add version.properties
+          git commit -m "Bump version" && git push -f || echo "No changes to commit"
+          git log -n 1 --pretty=format:"%H" | tail -n 1 | awk '{print "::set-output name=sha::"$0}'
+

.github/workflows/release.yml

@@ -1,92 +0,0 @@
-name: Make Release
-on:
-  # Can optionally take parameters from the github UI, more info here https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/#:~:text=You%20can%20now%20create%20workflows,the%20workflow%20is%20run%20on.
-  workflow_dispatch:
-  #  inputs:
-
-  # Only want to run if version.properties is bumped in master
-  push:
-    branches:
-      - master
-    paths:
-      - "version.properties"
-
-jobs:
-  release-build:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      # Will be available in steps.version.outputs.version
-      - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
-        id: version
-      # Note: we don't use caches on release builds because we don't want to accidentally not have a virgin build machine
-
-      - name: Upgrade python tools
-        # We actually want to run this every time
-        # if: steps.cache-pip.outputs.cache-hit != 'true'
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio meshtastic adafruit-nrfutil littlefs-python
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: "meshtastic/meshtastic-web"
-          file: "build.tar"
-          target: "build.tar"
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Build everything
-        run: bin/build-all.sh
-
-      - name: Create release
-        uses: actions/create-release@v1
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          release_name: ${{ steps.version.outputs.version }} alpha
-          tag_name: v${{ steps.version.outputs.version }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: release/archive/elfs-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

bin/build-all.sh.legacy

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

bin/build-rpi2040.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Make sure our submodules are current
+git submodule update 
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio lib update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying uf2 file"
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/bump_version.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python
+"""Bump the version number"""
+
+lines = None
+
+with open('version.properties', 'r', encoding='utf-8') as f:
+    lines = f.readlines()
+
+with open('version.properties', 'w', encoding='utf-8') as f:
+    for line in lines:
+        if line.lstrip().startswith("build = "):
+            words = line.split(" = ")
+            ver = f'build = {int(words[1]) + 1}'
+            f.write(f'{ver}\n')
+        else:
+            f.write(line)

platformio.ini

@@ -65,7 +65,7 @@ lib_deps =
 
 build_flags = ${env.build_flags} -Os 
 # -DRADIOLIB_GODMODE
-build_src_filter = ${env.build_src_filter} -<portduino/>
+build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT 
 [networking_base]
@@ -92,7 +92,7 @@ lib_deps =
 extends = arduino_base
 platform = espressif32@3.5.0
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<nrf52/> -<stm32wl>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
 upload_speed = 115200
 debug_init_break = tbreak setup
 
@@ -101,15 +101,15 @@ debug_init_break = tbreak setup
 # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
 # -DUSE_NEW_ESP32_BLUETOOTH will enable the new NimBLE C++ api
 build_flags =
-  ${arduino_base.build_flags} -Wall -Wextra -Isrc/esp32 -Isrc/esp32-mfix-esp32-psram-cache-issue -lnimble -std=c++11 
+  ${arduino_base.build_flags} -Wall -Wextra -Isrc/platform/esp32 -lnimble -std=c++11 
   -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial -DUSE_NEW_ESP32_BLUETOOTH
+  -DAXP_DEBUG_PORT=Serial -DUSE_NEW_ESP32_BLUETOOTH -DCONFIG_BT_NIMBLE_ENABLED -DCONFIG_NIMBLE_CPP_LOG_LEVEL=1
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git
-  h2zero/NimBLE-Arduino@1.3.7
+  h2zero/NimBLE-Arduino@1.4.0
   arduino-libraries/NTPClient@^3.1.0
   lorol/LittleFS_esp32@^1.0.6
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
@@ -142,9 +142,9 @@ build_type = debug ; I'm debugging with ICE a lot now
 ; note: liboberon provides the AES256 implementation for NRF52 (though not using the hardware acceleration of the NRF52840 - FIXME)
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/nrf52
+  -Isrc/platform/nrf52
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<esp32/> -<stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040>
 lib_ignore =
   BluetoothOTA
 
@@ -165,3 +165,23 @@ board = nrf52840_dk
 [env:feather_nrf52832]
 extends = nrf52_base
 board = adafruit_feather_nrf52832
+
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git
+extends = arduino_base
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2040
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl>
+lib_ignore =
+  BluetoothOTA
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git

src/ButtonThread.h

@@ -132,7 +132,7 @@ class ButtonThread : public concurrency::OSThread
 #endif
         // If user button is held down for 5 seconds, shutdown the device.
         if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
             if (axp192_found == true) {
                 setLed(false);
                 power->shutdown();
@@ -144,8 +144,15 @@ class ButtonThread : public concurrency::OSThread
                 screen->startShutdownScreen();
                 DEBUG_MSG("Shutdown from long press");
                 playBeep();
+#ifdef PIN_LED1
                 ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
                 ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+                ledOff(PIN_LED3);
+#endif
                 shutdown_on_long_stop = true;
             }
 #endif

src/FSCommon.cpp

@@ -1,10 +1,50 @@
 #include "configuration.h"
 #include "FSCommon.h"
 
+
+bool copyFile(const char* from, const char* to)
+{
+#ifdef FSCom
+    unsigned char cbuffer[16];
+   
+    File f1 = FSCom.open(from, FILE_O_READ);
+    if (!f1){
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+
+    File f2 = FSCom.open(to, FILE_O_WRITE);
+    if (!f2) {
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+   
+    while (f1.available() > 0) {
+        byte i = f1.read(cbuffer, 16);
+        f2.write(cbuffer, i);
+    }
+   
+    f2.close();
+    f1.close();
+    return true;
+#endif
+}
+
+bool renameFile(const char* pathFrom, const char* pathTo)
+{
+#ifdef FSCom
+    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom) ) {
+        return true;
+    } else{
+        return false;
+    }
+#endif
+}
+
 void listDir(const char * dirname, uint8_t levels)
 {
 #ifdef FSCom
-    File root = FSCom.open(dirname);
+    File root = FSCom.open(dirname, FILE_O_READ);
     if(!root){
         return;
     }
@@ -31,7 +71,7 @@ void listDir(const char * dirname, uint8_t levels)
 void rmDir(const char * dirname)
 {
 #ifdef FSCom
-    File file = FSCom.open(dirname);
+    File file = FSCom.open(dirname, FILE_O_READ);
     if(!file){
         return;
     }

src/FSCommon.h

@@ -13,6 +13,15 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_RP2040)
+// RP2040
+#include "LittleFS.h"
+#define FSCom LittleFS
+#define FSBegin() FSCom.begin()
+#define FILE_O_WRITE "w"
+#define FILE_O_READ "r"
+#endif
+
 #if defined(ARCH_ESP32)
 // ESP32 version
 #include "LITTLEFS.h"
@@ -31,5 +40,6 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
+bool renameFile(const char* pathFrom, const char* pathTo);
 void listDir(const char * dirname, uint8_t levels);
 void rmDir(const char * dirname);

src/Power.cpp

@@ -7,9 +7,7 @@
 #include "utils.h"
 #include "buzz/buzz.h"
 
-#ifdef TBEAM_V10
-// FIXME. nasty hack cleanup how we load axp192
-#undef AXP192_SLAVE_ADDRESS
+#ifdef HAS_AXP192
 #include "axp20x.h"
 
 AXP20X_Class axp;
@@ -158,8 +156,21 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
 
+#ifndef BAT_FULLVOLT
+#define BAT_FULLVOLT 4200
+#endif 
+#ifndef BAT_EMPTYVOLT
+#define BAT_EMPTYVOLT 3270
+#endif 
+#ifndef BAT_CHARGINGVOLT
+#define BAT_CHARGINGVOLT 4210
+#endif 
+#ifndef BAT_NOBATVOLT
+#define BAT_NOBATVOLT 2230
+#endif 
+
     /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
-    const float fullVolt = 4200, emptyVolt = 3270, chargingVolt = 4210, noBatVolt = 2230;
+    const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
 };
@@ -221,7 +232,7 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     DEBUG_MSG("Shutting down\n");
     axp.setChgLEDMode(AXP20X_LED_OFF);
     axp.shutdown();
@@ -293,7 +304,7 @@ int32_t Power::runOnce()
 {
     readPowerStatus();
 
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
     // the IRQ status by reading the registers over I2C
     axp.readIRQ();
@@ -343,7 +354,7 @@ int32_t Power::runOnce()
  */
 bool Power::axp192Init()
 {
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     if (axp192_found) {
         if (!axp.begin(Wire, AXP192_SLAVE_ADDRESS)) {
             batteryLevel = &axp;

src/PowerFSM.cpp

@@ -12,7 +12,7 @@
 static bool isPowered()
 {
     // Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
-    #if !defined(BATTERY_PIN) && !defined(AXP192_SLAVE_ADDRESS)
+    #if !defined(BATTERY_PIN) && !defined(HAS_AXP192)
         return true;
     #endif
 

src/RedirectablePrint.cpp

@@ -38,20 +38,13 @@ size_t RedirectablePrint::write(uint8_t c)
 size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 {
     va_list copy;
+    static char printBuf[160];
 
     va_copy(copy, arg);
-    int len = vsnprintf(printBuf, printBufLen, format, copy);
+    int len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
     va_end(copy);
-    if (len < 0) {
-        va_end(arg);
-        return 0;
-    };
-    if (len >= (int)printBufLen) {
-        delete[] printBuf;
-        printBufLen *= 2;
-        printBuf = new char[printBufLen];
-        len = vsnprintf(printBuf, printBufLen, format, arg);
-    }
+
+    if (len < 0) return 0;
 
     len = Print::write(printBuf, len);
     return len;

src/RedirectablePrint.h

@@ -12,10 +12,6 @@ class RedirectablePrint : public Print
 {
     Print *dest;
 
-    /// We dynamically grow this scratch buffer if necessary
-    char *printBuf = new char[64];
-    size_t printBufLen = 64;
-
     /// Used to allow multiple logDebug messages to appear on a single log line
     bool isContinuationMessage = false;
 

src/configuration.h

@@ -81,7 +81,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define DISABLE_NTP
 
 // Disable the welcome screen and allow 
-#define DISABLE_WELCOME_UNSET
+//#define DISABLE_WELCOME_UNSET
 
 // -----------------------------------------------------------------------------
 // OLED & Input

src/cubecell/FS.h

@@ -1 +0,0 @@
-// Placeholder FIXME

src/detect/i2cScan.h

@@ -3,6 +3,10 @@
 #include <Wire.h>
 #include "mesh/generated/telemetry.pb.h"
 
+#ifdef HAS_AXP192
+#include "axp20x.h"
+#endif
+
 #if HAS_WIRE
 uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length) {
     uint16_t value = 0x00;
@@ -110,7 +114,7 @@ void scanI2Cdevice(void)
                 screen_found = addr;
                 DEBUG_MSG("st7567 display found\n");
             }
-#ifdef AXP192_SLAVE_ADDRESS
+#ifdef HAS_AXP192
             if (addr == AXP192_SLAVE_ADDRESS) {
                 axp192_found = true;
                 DEBUG_MSG("axp192 PMU found\n");

src/esp32/ESP32Bluetooth.cpp

@@ -1,259 +0,0 @@
-#ifdef USE_NEW_ESP32_BLUETOOTH
-
-#include "configuration.h"
-#include "ESP32Bluetooth.h"
-#include "BluetoothCommon.h"
-#include "PowerFSM.h"
-#include "sleep.h"
-#include "main.h"
-#include "mesh/PhoneAPI.h"
-#include "mesh/mesh-pb-constants.h"
-#include <NimBLEDevice.h>
-
-//static BLEService meshBleService = BLEService(BLEUuid(MESH_SERVICE_UUID_16));
-//static BLECharacteristic fromNum = BLECharacteristic(BLEUuid(FROMNUM_UUID_16));
-//static BLECharacteristic fromRadio = BLECharacteristic(BLEUuid(FROMRADIO_UUID_16));
-//static BLECharacteristic toRadio = BLECharacteristic(BLEUuid(TORADIO_UUID_16));
-
-//static BLEDis bledis; // DIS (Device Information Service) helper class instance
-//static BLEBas blebas; // BAS (Battery Service) helper class instance
-//static BLEDfu bledfu; // DFU software update helper service
-
-// This scratch buffer is used for various bluetooth reads/writes - but it is safe because only one bt operation can be in
-// proccess at once
-// static uint8_t trBytes[_max(_max(_max(_max(ToRadio_size, RadioConfig_size), User_size), MyNodeInfo_size), FromRadio_size)];
-static uint8_t fromRadioBytes[FromRadio_size];
-
-NimBLECharacteristic *FromNumCharacteristic;
-NimBLEServer *bleServer;
-
-static bool passkeyShowing;
-static uint32_t doublepressed;
-
-/**
- * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
- */
-void BluetoothPhoneAPI::onNowHasData(uint32_t fromRadioNum)
-{
-    PhoneAPI::onNowHasData(fromRadioNum);
-
-    DEBUG_MSG("BLE notify fromNum\n");
-    //fromNum.notify32(fromRadioNum);
-    
-    uint8_t val[4];
-    put_le32(val, fromRadioNum);
-
-    std::string fromNumByteString(&val[0], &val[0] + sizeof(val));
-
-    FromNumCharacteristic->setValue(fromNumByteString);
-    FromNumCharacteristic->notify();
-}
-
-/// Check the current underlying physical link to see if the client is currently connected
-bool BluetoothPhoneAPI::checkIsConnected() {
-    if (bleServer && bleServer->getConnectedCount() > 0) {
-        return true;
-    }
-    return false;
-}
-
-PhoneAPI *bluetoothPhoneAPI;
-
-class ESP32BluetoothToRadioCallback : public NimBLECharacteristicCallbacks {
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic) {
-        DEBUG_MSG("To Radio onwrite\n");
-        auto valueString = pCharacteristic->getValue();
-        
-        bluetoothPhoneAPI->handleToRadio(reinterpret_cast<const uint8_t*>(&valueString[0]), pCharacteristic->getDataLength());
-    }
-};
-
-class ESP32BluetoothFromRadioCallback : public NimBLECharacteristicCallbacks {
-    virtual void onRead(NimBLECharacteristic *pCharacteristic) {
-        DEBUG_MSG("From Radio onread\n");
-        size_t numBytes = bluetoothPhoneAPI->getFromRadio(fromRadioBytes);
-
-        std::string fromRadioByteString(fromRadioBytes, fromRadioBytes + numBytes);
-
-        pCharacteristic->setValue(fromRadioByteString);
-    }
-};
-
-class ESP32BluetoothServerCallback : public NimBLEServerCallbacks {
-    virtual uint32_t onPassKeyRequest() {
-
-        uint32_t passkey = 0;
-
-        if (doublepressed > 0 && (doublepressed + (30 * 1000)) > millis()) {
-            DEBUG_MSG("User has overridden passkey\n");
-            passkey = defaultBLEPin;
-        } else {
-            DEBUG_MSG("Using random passkey\n");
-            passkey = random(
-                100000, 999999); // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
-        }
-        DEBUG_MSG("*** Enter passkey %d on the peer side ***\n", passkey);
-
-        powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
-        screen->startBluetoothPinScreen(passkey);
-        passkeyShowing = true;
-
-        return passkey;
-    }
-
-    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc) {
-        DEBUG_MSG("BLE authentication complete\n");
-
-        if (passkeyShowing) {
-            passkeyShowing = false;
-            screen->stopBluetoothPinScreen();
-        }
-    }
-};
-
-
-static ESP32BluetoothToRadioCallback *toRadioCallbacks;
-static ESP32BluetoothFromRadioCallback *fromRadioCallbacks;
-
-void ESP32Bluetooth::shutdown()
-{
-    // Shutdown bluetooth for minimum power draw
-    DEBUG_MSG("Disable bluetooth\n");
-    //Bluefruit.Advertising.stop();
-}
-
-void ESP32Bluetooth::setup()
-{
-    // Initialise the Bluefruit module
-    DEBUG_MSG("Initialise the ESP32 bluetooth module\n");
-    //Bluefruit.autoConnLed(false);
-    //Bluefruit.begin();
-
-    // Set the advertised device name (keep it short!)
-    //Bluefruit.setName(getDeviceName());
-
-    // Set the connect/disconnect callback handlers
-    //Bluefruit.Periph.setConnectCallback(connect_callback);
-    //Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-    // Configure and Start the Device Information Service
-    DEBUG_MSG("Configuring the Device Information Service\n");
-    // FIXME, we should set a mfg string based on our HW_VENDOR enum
-    // bledis.setManufacturer(HW_VENDOR);
-    //bledis.setModel(optstr(HW_VERSION));
-    //bledis.setFirmwareRev(optstr(APP_VERSION));
-    //bledis.begin();
-
-    // Start the BLE Battery Service and set it to 100%
-    //DEBUG_MSG("Configuring the Battery Service\n");
-    //blebas.begin();
-    //blebas.write(0); // Unknown battery level for now
-
-    //bledfu.begin(); // Install the DFU helper
-
-    // Setup the Heart Rate Monitor service using
-    // BLEService and BLECharacteristic classes
-    DEBUG_MSG("Configuring the Mesh bluetooth service\n");
-    //setupMeshService();
-
-    // Supposedly debugging works with soft device if you disable advertising
-    //if (isSoftDeviceAllowed) {
-        // Setup the advertising packet(s)
-    //    DEBUG_MSG("Setting up the advertising payload(s)\n");
-    //    startAdv();
-
-    //    DEBUG_MSG("Advertising\n");
-    //}
-
-    //NimBLEDevice::deleteAllBonds();
-
-    NimBLEDevice::init(getDeviceName());
-    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
-
-    NimBLEDevice::setSecurityAuth(true, true, true);
-    NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
-    bleServer = NimBLEDevice::createServer();
-    
-    ESP32BluetoothServerCallback *serverCallbacks = new ESP32BluetoothServerCallback();
-    bleServer->setCallbacks(serverCallbacks);
-
-    NimBLEService *bleService = bleServer->createService(MESH_SERVICE_UUID);
-    //NimBLECharacteristic *pNonSecureCharacteristic = bleService->createCharacteristic("1234", NIMBLE_PROPERTY::READ );
-    //NimBLECharacteristic *pSecureCharacteristic = bleService->createCharacteristic("1235", NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_ENC | NIMBLE_PROPERTY::READ_AUTHEN);
-
-    //define the characteristics that the app is looking for
-    NimBLECharacteristic *ToRadioCharacteristic = bleService->createCharacteristic(TORADIO_UUID, NIMBLE_PROPERTY::WRITE | NIMBLE_PROPERTY::WRITE_AUTHEN | NIMBLE_PROPERTY::WRITE_ENC);
-    NimBLECharacteristic *FromRadioCharacteristic = bleService->createCharacteristic(FROMRADIO_UUID, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
-    FromNumCharacteristic = bleService->createCharacteristic(FROMNUM_UUID, NIMBLE_PROPERTY::NOTIFY | NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
-    
-    bluetoothPhoneAPI = new BluetoothPhoneAPI();
-
-    toRadioCallbacks = new ESP32BluetoothToRadioCallback();
-    ToRadioCharacteristic->setCallbacks(toRadioCallbacks);
-
-    fromRadioCallbacks = new ESP32BluetoothFromRadioCallback();
-    FromRadioCharacteristic->setCallbacks(fromRadioCallbacks);
-
-    //uint8_t val[4];
-    //uint32_t zero = 0;
-    //put_le32(val, zero);
-    //std::string fromNumByteString(&val[0], &val[0] + sizeof(val));
-    //FromNumCharacteristic->setValue(fromNumByteString);
-
-    bleService->start();
-    //pNonSecureCharacteristic->setValue("Hello Non Secure BLE");
-    //pSecureCharacteristic->setValue("Hello Secure BLE");
-
-    //FromRadioCharacteristic->setValue("FromRadioString");
-    //ToRadioCharacteristic->setCallbacks()
-
-    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
-    pAdvertising->start();
-
-}
-
-
-/// Given a level between 0-100, update the BLE attribute
-void updateBatteryLevel(uint8_t level)
-{
-    //blebas.write(level);
-}
-
-void ESP32Bluetooth::clearBonds()
-{
-    DEBUG_MSG("Clearing bluetooth bonds!\n");
-    //bond_print_list(BLE_GAP_ROLE_PERIPH);
-    //bond_print_list(BLE_GAP_ROLE_CENTRAL);
-
-    //Bluefruit.Periph.clearBonds();
-    //Bluefruit.Central.clearBonds();
-    
-}
-
-void clearNVS() {
-    NimBLEDevice::deleteAllBonds();
-    ESP.restart();
-}
-
-void disablePin() {
-    DEBUG_MSG("User Override, disabling bluetooth pin requirement\n");
-    // keep track of when it was pressed, so we know it was within X seconds
-
-    // Flash the LED
-    setLed(true);
-    delay(100);
-    setLed(false);
-    delay(100);
-    setLed(true);
-    delay(100);
-    setLed(false);
-    delay(100);
-    setLed(true);
-    delay(100);
-    setLed(false);
-
-    doublepressed = millis();
-}
-
-#endif

src/esp32/ESP32Bluetooth.h

@@ -1,33 +0,0 @@
-#ifdef USE_NEW_ESP32_BLUETOOTH
-
-#pragma once
-
-extern uint16_t fromNumValHandle;
-
-class BluetoothPhoneAPI : public PhoneAPI
-{
-protected: 
-    /**
-     * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
-     */
-    virtual void onNowHasData(uint32_t fromRadioNum) override;
-
-    /// Check the current underlying physical link to see if the client is currently connected
-    virtual bool checkIsConnected() override;
-};
-
-extern PhoneAPI *bluetoothPhoneAPI;
-
-class ESP32Bluetooth
-{
-  public:
-    void setup();
-    void shutdown();
-    void clearBonds();
-};
-
-void setBluetoothEnable(bool on);
-void clearNVS();
-void disablePin();
-
-#endif

src/gps/GPS.cpp

@@ -330,7 +330,7 @@ int32_t GPS::runOnce()
         if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
             DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
             devicestate.did_gps_reset = false;
-            nodeDB.saveToDisk();
+            nodeDB.saveDeviceStateToDisk();
         }
 #endif
     }

src/graphics/Screen.cpp

@@ -64,7 +64,7 @@ namespace graphics
 static FrameCallback normalFrames[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 static uint32_t targetFramerate = IDLE_FRAMERATE;
 static char btPIN[16] = "888888";
-
+    
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
 
@@ -595,7 +595,7 @@ class Point
     void rotate(float radian)
     {
         float cos = cosf(radian), sin = sinf(radian);
-        float rx = x * cos - y * sin, ry = x * sin + y * cos;
+        float rx = x * cos + y * sin, ry = -x * sin + y * cos;
 
         x = rx;
         y = ry;
@@ -609,8 +609,10 @@ class Point
 
     void scale(float f)
     {
+        //We use -f here to counter the flip that happens
+        //on the y axis when drawing and rotating on screen
         x *= f;
-        y *= f;
+        y *= -f;
     }
 };
 
@@ -682,16 +684,21 @@ static void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t comp
     drawLine(display, rightArrow, tip);
 }
 
-// Draw the compass heading
-static void drawCompassHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
+// Draw north
+static void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
 {
-    Point N1(-0.04f, -0.65f), N2(0.04f, -0.65f);
-    Point N3(-0.04f, -0.55f), N4(0.04f, -0.55f);
+    //If north is supposed to be at the top of the compass we want rotation to be +0
+    if(config.display.compass_north_top)
+        myHeading = -0;
+    
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
     Point *rosePoints[] = {&N1, &N2, &N3, &N4};
 
     for (int i = 0; i < 4; i++) {
-        rosePoints[i]->rotate(myHeading);
-        rosePoints[i]->scale(-1 * COMPASS_DIAM);
+        // North on compass will be negative of heading
+        rosePoints[i]->rotate(-myHeading);
+        rosePoints[i]->scale(COMPASS_DIAM);
         rosePoints[i]->translate(compassX, compassY);
     }
     drawLine(display, N1, N3);
@@ -762,7 +769,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (ourNode && hasPosition(ourNode)) {
         Position &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
-        drawCompassHeading(display, compassX, compassY, myHeading);
+        drawCompassNorth(display, compassX, compassY, myHeading);
 
         if (hasPosition(node)) {
             // display direction toward node
@@ -775,12 +782,13 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
             else
                 snprintf(distStr, sizeof(distStr), "%.1f km", d / 1000);
 
-            // FIXME, also keep the guess at the operators heading and add/substract
-            // it.  currently we don't do this and instead draw north up only.
             float bearingToOther =
-                GeoCoord::bearing(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
-            float headingRadian = bearingToOther - myHeading;
-            drawNodeHeading(display, compassX, compassY, headingRadian);
+                GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            // If the top of the compass is a static north then bearingToOther can be drawn on the compass directly
+            // If the top of the compass is not a static north we need adjust bearingToOther based on heading
+            if(!config.display.compass_north_top)
+                bearingToOther -= myHeading;
+            drawNodeHeading(display, compassX, compassY, bearingToOther);
         }
     }
     if (!hasNodeHeading)
@@ -935,9 +943,11 @@ void Screen::setup()
     handleSetOn(true);
 
     // On some ssd1306 clones, the first draw command is discarded, so draw it
-    // twice initially.
+    // twice initially. Skip this for EINK Displays to save a few seconds during boot
     ui.update();
+#ifndef USE_EINK
     ui.update();
+#endif
     serialSinceMsec = millis();
 
     // Subscribe to status updates
@@ -1355,7 +1365,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 
     if (isSoftAPForced()) {
         display->drawString(x, y, String("WiFi: Software AP (Admin)"));
-    } else if (config.wifi.ap_mode) {
+    } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
         display->drawString(x, y, String("WiFi: Software AP"));
     } else if (WiFi.status() != WL_CONNECTED) {
         display->drawString(x, y, String("WiFi: Not Connected"));
@@ -1378,8 +1388,8 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     - WL_NO_SHIELD: assigned when no WiFi shield is present;
 
     */
-    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.wifi.ap_mode) {
-        if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
+        if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
 
             // Number of connections to the AP. Default max for the esp32 is 4
@@ -1471,7 +1481,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         }
 
     } else {
-        if (config.wifi.ap_mode) {
+        if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
             if ((millis() / 10000) % 2) {
                 display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
             } else {
@@ -1665,4 +1675,5 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 }
 
 } // namespace graphics
-#endif // HAS_SCREEN
+
+#endif // HAS_SCREEN

src/main.cpp

@@ -17,9 +17,9 @@
 #include "SPILock.h"
 #include "concurrency/OSThread.h"
 #include "concurrency/Periodic.h"
-#include "debug/axpDebug.h"
-#include "debug/einkScan.h"
-#include "debug/i2cScan.h"
+#include "detect/axpDebug.h"
+#include "detect/einkScan.h"
+#include "detect/i2cScan.h"
 #include "graphics/Screen.h"
 #include "main.h"
 #include "modules/Modules.h"
@@ -35,7 +35,7 @@
 #include "mesh/http/WebServer.h"
 
 #ifdef USE_NEW_ESP32_BLUETOOTH
-#include "esp32/ESP32Bluetooth.h"
+#include "platform/esp32/ESP32Bluetooth.h"
 #else
 #include "nimble/BluetoothUtil.h"
 #endif
@@ -307,7 +307,7 @@ void setup()
     setupModules();
 
     // Do this after service.init (because that clears error_code)
-#ifdef AXP192_SLAVE_ADDRESS
+#ifdef HAS_AXP192
     if (!axp192_found)
         RECORD_CRITICALERROR(CriticalErrorCode_NoAXP192); // Record a hardware fault for missing hardware
 #endif

src/mesh/MeshService.cpp

@@ -168,7 +168,7 @@ void MeshService::sendNetworkPing(NodeNum dest, bool wantReplies)
     NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
     assert(node);
 
-    if (node->has_position) {
+    if (node->has_position && (node->position.latitude_i != 0 || node->position.longitude_i != 0)) {
         if (positionModule) {
             DEBUG_MSG("Sending position ping to 0x%x, wantReplies=%d\n", dest, wantReplies);
             positionModule->sendOurPosition(dest, wantReplies);

src/mesh/NodeDB.cpp

@@ -43,14 +43,6 @@ ChannelFile channelFile;
  */
 uint32_t radioGeneration;
 
-/*
-DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
-#define here.
-*/
-
-#define DEVICESTATE_CUR_VER 13
-#define DEVICESTATE_MIN_VER DEVICESTATE_CUR_VER
-
 // FIXME - move this somewhere else
 extern void getMacAddr(uint8_t *dmac);
 
@@ -305,7 +297,7 @@ bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_
 #ifdef FSCom
     // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
 
-    auto f = FSCom.open(filename);
+    auto f = FSCom.open(filename, FILE_O_READ);
 
     if (f) {
         DEBUG_MSG("Loading %s\n", filename);
@@ -414,7 +406,7 @@ bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_
         // brief window of risk here ;-)
         if (FSCom.exists(filename) && !FSCom.remove(filename))
             DEBUG_MSG("Warning: Can't remove old pref file\n");
-        if (!FSCom.rename(filenameTmp.c_str(), filename))
+        if (!renameFile(filenameTmp.c_str(), filename))
             DEBUG_MSG("Error: can't rename new pref file\n");
     } else {
         DEBUG_MSG("Can't write prefs\n");
@@ -435,6 +427,16 @@ void NodeDB::saveChannelsToDisk()
     }
 }
 
+void NodeDB::saveDeviceStateToDisk() 
+{
+    if (!devicestate.no_save) {
+#ifdef FSCom
+        FSCom.mkdir("/prefs");
+#endif
+        saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+    }
+}
+
 void NodeDB::saveToDisk()
 {
     if (!devicestate.no_save) {

src/mesh/NodeDB.h

@@ -8,6 +8,14 @@
 #include "NodeStatus.h"
 #include "mesh-pb-constants.h"
 
+/*
+DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
+#define here.
+*/
+
+#define DEVICESTATE_CUR_VER 14
+#define DEVICESTATE_MIN_VER DEVICESTATE_CUR_VER
+
 extern DeviceState devicestate;
 extern ChannelFile channelFile;
 extern MyNodeInfo &myNodeInfo;
@@ -44,7 +52,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(), saveChannelsToDisk();
+    void saveToDisk(), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or

src/mesh/PhoneAPI.cpp

@@ -79,20 +79,17 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
     memset(&toRadioScratch, 0, sizeof(toRadioScratch));
     if (pb_decode_from_bytes(buf, bufLength, ToRadio_fields, &toRadioScratch)) {
         switch (toRadioScratch.which_payloadVariant) {
-        case ToRadio_packet_tag:
-            return handleToRadioPacket(toRadioScratch.packet);
-
-        case ToRadio_want_config_id_tag:
-            config_nonce = toRadioScratch.want_config_id;
-            DEBUG_MSG("Client wants config, nonce=%u\n", config_nonce);
-
-            handleStartConfig();
-            break;
-
-        case ToRadio_disconnect_tag:
-            close();
-            break;
+            case ToRadio_packet_tag:
+                return handleToRadioPacket(toRadioScratch.packet);
+            case ToRadio_want_config_id_tag:
+                config_nonce = toRadioScratch.want_config_id;
+                DEBUG_MSG("Client wants config, nonce=%u\n", config_nonce);
 
+                handleStartConfig();
+                break;
+            case ToRadio_disconnect_tag:
+                close();
+                break;
         default:
             // Ignore nop messages
             // DEBUG_MSG("Error: unexpected ToRadio variant\n");
@@ -112,9 +109,8 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
  *
  * Our sending states progress in the following sequence (the client app ASSUMES THIS SEQUENCE, DO NOT CHANGE IT):
  *      STATE_SEND_MY_INFO, // send our my info record
- *      STATE_SEND_GROUPS
+ *      STATE_SEND_NODEINFO, // states progress in this order as the device sends to the client
         STATE_SEND_CONFIG,
-        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
         STATE_SEND_COMPLETE_ID,
         STATE_SEND_PACKETS // send packets or debug strings
  */
@@ -141,11 +137,30 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         myNodeInfo.has_gps = gps && gps->isConnected(); // Update with latest GPS connect info
         fromRadioScratch.which_payloadVariant = FromRadio_my_info_tag;
         fromRadioScratch.my_info = myNodeInfo;
-        state = STATE_SEND_CONFIG;
+        state = STATE_SEND_NODEINFO;
 
         service.refreshMyNodeInfo(); // Update my NodeInfo because the client will be asking for it soon.
         break;
 
+    case STATE_SEND_NODEINFO: {
+        const NodeInfo *info = nodeInfoForPhone;
+        nodeInfoForPhone = NULL; // We just consumed a nodeinfo, will need a new one next time
+
+        if (info) {
+            DEBUG_MSG("Sending nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s\n", info->num, info->last_heard, info->user.id,
+                      info->user.long_name);
+            fromRadioScratch.which_payloadVariant = FromRadio_node_info_tag;
+            fromRadioScratch.node_info = *info;
+            // Stay in current state until done sending nodeinfos
+        } else {
+            DEBUG_MSG("Done sending nodeinfos\n");
+            state = STATE_SEND_CONFIG;
+            // Go ahead and send that ID right now
+            return getFromRadio(buf);
+        }
+        break;
+    }
+
     case STATE_SEND_CONFIG:
         fromRadioScratch.which_payloadVariant = FromRadio_config_tag;
         switch (config_state) {
@@ -220,28 +235,10 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         config_state++;
         // Advance when we have sent all of our ModuleConfig objects
         if (config_state > ModuleConfig_canned_message_tag) {
-            state = STATE_SEND_NODEINFO;
+            state = STATE_SEND_COMPLETE_ID;
             config_state = Config_device_tag;
         }
         break;
-    case STATE_SEND_NODEINFO: {
-        const NodeInfo *info = nodeInfoForPhone;
-        nodeInfoForPhone = NULL; // We just consumed a nodeinfo, will need a new one next time
-
-        if (info) {
-            DEBUG_MSG("Sending nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s\n", info->num, info->last_heard, info->user.id,
-                      info->user.long_name);
-            fromRadioScratch.which_payloadVariant = FromRadio_node_info_tag;
-            fromRadioScratch.node_info = *info;
-            // Stay in current state until done sending nodeinfos
-        } else {
-            DEBUG_MSG("Done sending nodeinfos\n");
-            state = STATE_SEND_COMPLETE_ID;
-            // Go ahead and send that ID right now
-            return getFromRadio(buf);
-        }
-        break;
-    }
 
     case STATE_SEND_COMPLETE_ID:
         fromRadioScratch.which_payloadVariant = FromRadio_config_complete_id_tag;

src/mesh/PhoneAPI.h

@@ -22,10 +22,9 @@ class PhoneAPI
     enum State {
         STATE_SEND_NOTHING, // Initial state, don't send anything until the client starts asking for config
         STATE_SEND_MY_INFO, // send our my info record
-        STATE_SEND_GROUPS, // new in 1.3?
+        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
         STATE_SEND_CONFIG, // Replacement for the old Radioconfig
         STATE_SEND_MODULECONFIG, // Send Module specific config
-        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
         STATE_SEND_COMPLETE_ID,
         STATE_SEND_PACKETS // send packets or debug strings
     };

src/mesh/generated/admin.pb.h

@@ -6,6 +6,7 @@
 #include <pb.h>
 #include "channel.pb.h"
 #include "config.pb.h"
+#include "device_metadata.pb.h"
 #include "mesh.pb.h"
 #include "module_config.pb.h"
 
@@ -73,6 +74,8 @@ typedef struct _AdminMessage {
         ModuleConfig set_module_config;
         /* Sent immediatly after a config change has been sent to ensure comms, if this is not recieved, the config will be reverted after 10 mins */
         bool confirm_set_module_config;
+        /* Send all channels in the response to this message */
+        bool get_all_channel_request;
         /* Setting channels/radio config remotely carries the risk that you might send an invalid config and the radio never talks to your mesh again.
      Therefore if setting either of these properties remotely, you must send a confirm_xxx message within 10 minutes.
      If you fail to do so, the radio will assume loss of comms and revert your changes.
@@ -111,6 +114,10 @@ typedef struct _AdminMessage {
         char set_canned_message_module_part4[201];
         /* Tell the node to shutdown in this many seconds (or <0 to cancel shutdown) */
         int32_t shutdown_seconds;
+        /* Request the node to send device metadata (firmware, protobuf version, etc) */
+        uint32_t get_device_metadata_request;
+        /* Device metadata response */
+        DeviceMetadata get_device_metadata_response;
     };
 } AdminMessage;
 
@@ -148,6 +155,7 @@ extern "C" {
 #define AdminMessage_get_module_config_response_tag 15
 #define AdminMessage_set_module_config_tag       16
 #define AdminMessage_confirm_set_module_config_tag 17
+#define AdminMessage_get_all_channel_request_tag 18
 #define AdminMessage_confirm_set_channel_tag     32
 #define AdminMessage_confirm_set_radio_tag       33
 #define AdminMessage_exit_simulator_tag          34
@@ -165,6 +173,8 @@ extern "C" {
 #define AdminMessage_set_canned_message_module_part3_tag 46
 #define AdminMessage_set_canned_message_module_part4_tag 47
 #define AdminMessage_shutdown_seconds_tag        51
+#define AdminMessage_get_device_metadata_request_tag 52
+#define AdminMessage_get_device_metadata_response_tag 53
 
 /* Struct field encoding specification for nanopb */
 #define AdminMessage_FIELDLIST(X, a) \
@@ -182,6 +192,7 @@ X(a, STATIC,   ONEOF,    UENUM,    (variant,get_module_config_request,get_module
 X(a, STATIC,   ONEOF,    MESSAGE,  (variant,get_module_config_response,get_module_config_response),  15) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (variant,set_module_config,set_module_config),  16) \
 X(a, STATIC,   ONEOF,    BOOL,     (variant,confirm_set_module_config,confirm_set_module_config),  17) \
+X(a, STATIC,   ONEOF,    BOOL,     (variant,get_all_channel_request,get_all_channel_request),  18) \
 X(a, STATIC,   ONEOF,    BOOL,     (variant,confirm_set_channel,confirm_set_channel),  32) \
 X(a, STATIC,   ONEOF,    BOOL,     (variant,confirm_set_radio,confirm_set_radio),  33) \
 X(a, STATIC,   ONEOF,    BOOL,     (variant,exit_simulator,exit_simulator),  34) \
@@ -198,7 +209,9 @@ X(a, STATIC,   ONEOF,    STRING,   (variant,set_canned_message_module_part1,set_
 X(a, STATIC,   ONEOF,    STRING,   (variant,set_canned_message_module_part2,set_canned_message_module_part2),  45) \
 X(a, STATIC,   ONEOF,    STRING,   (variant,set_canned_message_module_part3,set_canned_message_module_part3),  46) \
 X(a, STATIC,   ONEOF,    STRING,   (variant,set_canned_message_module_part4,set_canned_message_module_part4),  47) \
-X(a, STATIC,   ONEOF,    INT32,    (variant,shutdown_seconds,shutdown_seconds),  51)
+X(a, STATIC,   ONEOF,    INT32,    (variant,shutdown_seconds,shutdown_seconds),  51) \
+X(a, STATIC,   ONEOF,    UINT32,   (variant,get_device_metadata_request,get_device_metadata_request),  52) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (variant,get_device_metadata_response,get_device_metadata_response),  53)
 #define AdminMessage_CALLBACK NULL
 #define AdminMessage_DEFAULT NULL
 #define AdminMessage_variant_set_owner_MSGTYPE User
@@ -209,6 +222,7 @@ X(a, STATIC,   ONEOF,    INT32,    (variant,shutdown_seconds,shutdown_seconds),
 #define AdminMessage_variant_set_config_MSGTYPE Config
 #define AdminMessage_variant_get_module_config_response_MSGTYPE ModuleConfig
 #define AdminMessage_variant_set_module_config_MSGTYPE ModuleConfig
+#define AdminMessage_variant_get_device_metadata_response_MSGTYPE DeviceMetadata
 
 extern const pb_msgdesc_t AdminMessage_msg;
 

src/mesh/generated/config.pb.c

@@ -34,3 +34,4 @@ PB_BIND(Config_LoRaConfig, Config_LoRaConfig, 2)
 
 
 
+

src/mesh/generated/config.pb.h

@@ -51,6 +51,12 @@ typedef enum _Config_PowerConfig_ChargeCurrent {
     Config_PowerConfig_ChargeCurrent_MA1320 = 16 
 } Config_PowerConfig_ChargeCurrent;
 
+typedef enum _Config_WiFiConfig_WiFiMode { 
+    Config_WiFiConfig_WiFiMode_Client = 0, 
+    Config_WiFiConfig_WiFiMode_AccessPoint = 1, 
+    Config_WiFiConfig_WiFiMode_AccessPointHidden = 2 
+} Config_WiFiConfig_WiFiMode;
+
 typedef enum _Config_DisplayConfig_GpsCoordinateFormat { 
     Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDec = 0, 
     Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDMS = 1, 
@@ -99,6 +105,7 @@ typedef struct _Config_DisplayConfig {
     uint32_t screen_on_secs;
     Config_DisplayConfig_GpsCoordinateFormat gps_format;
     uint32_t auto_screen_carousel_secs;
+    bool compass_north_top;
 } Config_DisplayConfig;
 
 typedef struct _Config_LoRaConfig { 
@@ -138,10 +145,10 @@ typedef struct _Config_PowerConfig {
 } Config_PowerConfig;
 
 typedef struct _Config_WiFiConfig { 
+    bool enabled;
+    Config_WiFiConfig_WiFiMode mode;
     char ssid[33];
     char psk[64];
-    bool ap_mode;
-    bool ap_hidden;
 } Config_WiFiConfig;
 
 typedef struct _Config { 
@@ -170,6 +177,10 @@ typedef struct _Config {
 #define _Config_PowerConfig_ChargeCurrent_MAX Config_PowerConfig_ChargeCurrent_MA1320
 #define _Config_PowerConfig_ChargeCurrent_ARRAYSIZE ((Config_PowerConfig_ChargeCurrent)(Config_PowerConfig_ChargeCurrent_MA1320+1))
 
+#define _Config_WiFiConfig_WiFiMode_MIN Config_WiFiConfig_WiFiMode_Client
+#define _Config_WiFiConfig_WiFiMode_MAX Config_WiFiConfig_WiFiMode_AccessPointHidden
+#define _Config_WiFiConfig_WiFiMode_ARRAYSIZE ((Config_WiFiConfig_WiFiMode)(Config_WiFiConfig_WiFiMode_AccessPointHidden+1))
+
 #define _Config_DisplayConfig_GpsCoordinateFormat_MIN Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDec
 #define _Config_DisplayConfig_GpsCoordinateFormat_MAX Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOSGR
 #define _Config_DisplayConfig_GpsCoordinateFormat_ARRAYSIZE ((Config_DisplayConfig_GpsCoordinateFormat)(Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOSGR+1))
@@ -192,15 +203,15 @@ extern "C" {
 #define Config_DeviceConfig_init_default         {_Config_DeviceConfig_Role_MIN, 0, 0, 0, ""}
 #define Config_PositionConfig_init_default       {0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_default          {_Config_PowerConfig_ChargeCurrent_MIN, 0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_WiFiConfig_init_default           {"", "", 0, 0}
-#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0}
+#define Config_WiFiConfig_init_default           {0, _Config_WiFiConfig_WiFiMode_MIN, "", ""}
+#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0}
 #define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, {0, 0, 0}}
 #define Config_init_zero                         {0, {Config_DeviceConfig_init_zero}}
 #define Config_DeviceConfig_init_zero            {_Config_DeviceConfig_Role_MIN, 0, 0, 0, ""}
 #define Config_PositionConfig_init_zero          {0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_zero             {_Config_PowerConfig_ChargeCurrent_MIN, 0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_WiFiConfig_init_zero              {"", "", 0, 0}
-#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0}
+#define Config_WiFiConfig_init_zero              {0, _Config_WiFiConfig_WiFiMode_MIN, "", ""}
+#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0}
 #define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, {0, 0, 0}}
 
 /* Field tags (for use in manual encoding/decoding) */
@@ -212,6 +223,7 @@ extern "C" {
 #define Config_DisplayConfig_screen_on_secs_tag  1
 #define Config_DisplayConfig_gps_format_tag      2
 #define Config_DisplayConfig_auto_screen_carousel_secs_tag 3
+#define Config_DisplayConfig_compass_north_top_tag 4
 #define Config_LoRaConfig_tx_power_tag           1
 #define Config_LoRaConfig_modem_preset_tag       2
 #define Config_LoRaConfig_bandwidth_tag          3
@@ -238,10 +250,10 @@ extern "C" {
 #define Config_PowerConfig_sds_secs_tag          10
 #define Config_PowerConfig_ls_secs_tag           11
 #define Config_PowerConfig_min_wake_secs_tag     12
-#define Config_WiFiConfig_ssid_tag               1
-#define Config_WiFiConfig_psk_tag                2
-#define Config_WiFiConfig_ap_mode_tag            3
-#define Config_WiFiConfig_ap_hidden_tag          4
+#define Config_WiFiConfig_enabled_tag            1
+#define Config_WiFiConfig_mode_tag               2
+#define Config_WiFiConfig_ssid_tag               3
+#define Config_WiFiConfig_psk_tag                4
 #define Config_device_tag                        1
 #define Config_position_tag                      2
 #define Config_power_tag                         3
@@ -300,17 +312,18 @@ X(a, STATIC,   SINGULAR, UINT32,   min_wake_secs,    12)
 #define Config_PowerConfig_DEFAULT NULL
 
 #define Config_WiFiConfig_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, STRING,   ssid,              1) \
-X(a, STATIC,   SINGULAR, STRING,   psk,               2) \
-X(a, STATIC,   SINGULAR, BOOL,     ap_mode,           3) \
-X(a, STATIC,   SINGULAR, BOOL,     ap_hidden,         4)
+X(a, STATIC,   SINGULAR, BOOL,     enabled,           1) \
+X(a, STATIC,   SINGULAR, UENUM,    mode,              2) \
+X(a, STATIC,   SINGULAR, STRING,   ssid,              3) \
+X(a, STATIC,   SINGULAR, STRING,   psk,               4)
 #define Config_WiFiConfig_CALLBACK NULL
 #define Config_WiFiConfig_DEFAULT NULL
 
 #define Config_DisplayConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   screen_on_secs,    1) \
 X(a, STATIC,   SINGULAR, UENUM,    gps_format,        2) \
-X(a, STATIC,   SINGULAR, UINT32,   auto_screen_carousel_secs,   3)
+X(a, STATIC,   SINGULAR, UINT32,   auto_screen_carousel_secs,   3) \
+X(a, STATIC,   SINGULAR, BOOL,     compass_north_top,   4)
 #define Config_DisplayConfig_CALLBACK NULL
 #define Config_DisplayConfig_DEFAULT NULL
 
@@ -347,7 +360,7 @@ extern const pb_msgdesc_t Config_LoRaConfig_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define Config_DeviceConfig_size                 42
-#define Config_DisplayConfig_size                14
+#define Config_DisplayConfig_size                16
 #define Config_LoRaConfig_size                   67
 #define Config_PositionConfig_size               30
 #define Config_PowerConfig_size                  45

src/mesh/generated/device_metadata.pb.c

@@ -0,0 +1,12 @@
+/* Automatically generated nanopb constant definitions */
+/* Generated by nanopb-0.4.6 */
+
+#include "device_metadata.pb.h"
+#if PB_PROTO_HEADER_VERSION != 40
+#error Regenerate this file with the current version of nanopb generator.
+#endif
+
+PB_BIND(DeviceMetadata, DeviceMetadata, AUTO)
+
+
+

src/mesh/generated/device_metadata.pb.h

@@ -0,0 +1,53 @@
+/* Automatically generated nanopb header */
+/* Generated by nanopb-0.4.6 */
+
+#ifndef PB_DEVICE_METADATA_PB_H_INCLUDED
+#define PB_DEVICE_METADATA_PB_H_INCLUDED
+#include <pb.h>
+
+#if PB_PROTO_HEADER_VERSION != 40
+#error Regenerate this file with the current version of nanopb generator.
+#endif
+
+/* Struct definitions */
+/* Device metadata response */
+typedef struct _DeviceMetadata { 
+    /* Device firmware version string */
+    char firmware_version[18];
+    /* Device state version */
+    uint32_t device_state_version;
+} DeviceMetadata;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Initializer values for message structs */
+#define DeviceMetadata_init_default              {"", 0}
+#define DeviceMetadata_init_zero                 {"", 0}
+
+/* Field tags (for use in manual encoding/decoding) */
+#define DeviceMetadata_firmware_version_tag      1
+#define DeviceMetadata_device_state_version_tag  2
+
+/* Struct field encoding specification for nanopb */
+#define DeviceMetadata_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, STRING,   firmware_version,   1) \
+X(a, STATIC,   SINGULAR, UINT32,   device_state_version,   2)
+#define DeviceMetadata_CALLBACK NULL
+#define DeviceMetadata_DEFAULT NULL
+
+extern const pb_msgdesc_t DeviceMetadata_msg;
+
+/* Defines for backwards compatibility with code written before nanopb-0.4.0 */
+#define DeviceMetadata_fields &DeviceMetadata_msg
+
+/* Maximum encoded size of messages (where known) */
+#define DeviceMetadata_size                      25
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif

src/mesh/generated/deviceonly.pb.h

@@ -165,7 +165,7 @@ extern const pb_msgdesc_t OEMStore_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define ChannelFile_size                         630
-#define DeviceState_size                         23728
+#define DeviceState_size                         23994
 #define OEMStore_size                            2106
 
 #ifdef __cplusplus

src/mesh/generated/localonly.pb.h

@@ -138,7 +138,7 @@ extern const pb_msgdesc_t LocalModuleConfig_msg;
 #define LocalModuleConfig_fields &LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define LocalConfig_size                         319
+#define LocalConfig_size                         321
 #define LocalModuleConfig_size                   268
 
 #ifdef __cplusplus

src/mesh/generated/mesh.pb.h

@@ -71,6 +71,8 @@ typedef enum _HardwareModel {
     HardwareModel_DR_DEV = 43, 
     /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
     HardwareModel_M5STACK = 44, 
+    /* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station */
+    HardwareModel_STATION_G1 = 45, 
     /* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. */
     HardwareModel_PRIVATE_HW = 255 
 } HardwareModel;
@@ -255,6 +257,11 @@ typedef struct _Location {
     uint32_t expire;
     /* If true, only allow the original sender to update the location. */
     bool locked;
+    /* Name of the location - max 30 chars */
+    char name[30];
+    /* *
+ Description of the location - max 100 chars */
+    char description[100];
 } Location;
 
 /* Debug output from the device.
@@ -735,7 +742,7 @@ extern "C" {
 #define RouteDiscovery_init_default              {0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define Routing_init_default                     {0, {RouteDiscovery_init_default}}
 #define Data_init_default                        {_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, Location_init_default}
-#define Location_init_default                    {0, 0, 0, 0, 0}
+#define Location_init_default                    {0, 0, 0, 0, 0, "", ""}
 #define MeshPacket_init_default                  {0, 0, 0, 0, {Data_init_default}, 0, 0, 0, 0, 0, _MeshPacket_Priority_MIN, 0, _MeshPacket_Delayed_MIN}
 #define NodeInfo_init_default                    {0, false, User_init_default, false, Position_init_default, 0, 0, false, DeviceMetrics_init_default}
 #define MyNodeInfo_init_default                  {0, 0, "", _CriticalErrorCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, 0, 0}
@@ -749,7 +756,7 @@ extern "C" {
 #define RouteDiscovery_init_zero                 {0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define Routing_init_zero                        {0, {RouteDiscovery_init_zero}}
 #define Data_init_zero                           {_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, Location_init_zero}
-#define Location_init_zero                       {0, 0, 0, 0, 0}
+#define Location_init_zero                       {0, 0, 0, 0, 0, "", ""}
 #define MeshPacket_init_zero                     {0, 0, 0, 0, {Data_init_zero}, 0, 0, 0, 0, 0, _MeshPacket_Priority_MIN, 0, _MeshPacket_Delayed_MIN}
 #define NodeInfo_init_zero                       {0, false, User_init_zero, false, Position_init_zero, 0, 0, false, DeviceMetrics_init_zero}
 #define MyNodeInfo_init_zero                     {0, 0, "", _CriticalErrorCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, 0, 0}
@@ -767,6 +774,8 @@ extern "C" {
 #define Location_longitude_i_tag                 3
 #define Location_expire_tag                      4
 #define Location_locked_tag                      5
+#define Location_name_tag                        6
+#define Location_description_tag                 7
 #define LogRecord_message_tag                    1
 #define LogRecord_time_tag                       2
 #define LogRecord_source_tag                     3
@@ -939,7 +948,9 @@ X(a, STATIC,   SINGULAR, UINT32,   id,                1) \
 X(a, STATIC,   SINGULAR, SFIXED32, latitude_i,        2) \
 X(a, STATIC,   SINGULAR, SFIXED32, longitude_i,       3) \
 X(a, STATIC,   SINGULAR, UINT32,   expire,            4) \
-X(a, STATIC,   SINGULAR, BOOL,     locked,            5)
+X(a, STATIC,   SINGULAR, BOOL,     locked,            5) \
+X(a, STATIC,   SINGULAR, STRING,   name,              6) \
+X(a, STATIC,   SINGULAR, STRING,   description,       7)
 #define Location_CALLBACK NULL
 #define Location_DEFAULT NULL
 
@@ -1076,18 +1087,18 @@ extern const pb_msgdesc_t Compressed_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define Compressed_size                          243
-#define Data_size                                296
-#define FromRadio_size                           356
-#define Location_size                            24
+#define Data_size                                429
+#define FromRadio_size                           489
+#define Location_size                            156
 #define LogRecord_size                           81
-#define MeshPacket_size                          347
+#define MeshPacket_size                          480
 #define MyNodeInfo_size                          197
 #define NodeInfo_size                            281
 #define Position_size                            142
 #define RouteDiscovery_size                      40
 #define Routing_size                             42
 #define ToRadio_PeerInfo_size                    8
-#define ToRadio_size                             350
+#define ToRadio_size                             483
 #define User_size                                95
 
 #ifdef __cplusplus

src/mesh/http/ContentHandler.cpp

@@ -610,7 +610,7 @@ void handleReport(HTTPRequest *req, HTTPResponse *res)
 
     // data->wifi
     String ipStr;
-    if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
         ipStr = String(WiFi.softAPIP().toString());
     } else {
         ipStr = String(WiFi.localIP().toString());

src/mesh/http/WiFiAPClient.cpp

@@ -191,10 +191,14 @@ bool initWifi(bool forceSoftAP)
 
         if (forceSoftAP) {
             DEBUG_MSG("WiFi ... Forced AP Mode\n");
-        } else if (config.wifi.ap_mode) {
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint) {
             DEBUG_MSG("WiFi ... AP Mode\n");
-        } else {
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
+            DEBUG_MSG("WiFi ... Hidden AP Mode\n");
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_Client) {
             DEBUG_MSG("WiFi ... Client Mode\n");
+        } else {
+            DEBUG_MSG("WiFi ... WiFi Disabled\n");
         }
 
         createSSLCert();
@@ -203,7 +207,7 @@ bool initWifi(bool forceSoftAP)
             wifiPsw = NULL;
 
         if (*wifiName || forceSoftAP) {
-            if (config.wifi.ap_mode || forceSoftAP) {
+            if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || forceSoftAP) {
 
                 IPAddress apIP(192, 168, 42, 1);
                 WiFi.onEvent(WiFiEvent);
@@ -218,7 +222,7 @@ bool initWifi(bool forceSoftAP)
                 } else {
 
                     // If AP is configured to be hidden hidden
-                    if (config.wifi.ap_hidden) {
+                    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
 
                         // The configurations on softAP are from the espresif library
                         int ok = WiFi.softAP(wifiName, wifiPsw, 1, 1, 4);
@@ -373,7 +377,7 @@ static void WiFiEvent(WiFiEvent_t event)
 
 void handleDNSResponse()
 {
-    if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
         dnsServer.processNextRequest();
     }
 }

src/modules/AdminModule.cpp

@@ -109,6 +109,11 @@ bool AdminModule::handleReceivedProtobuf(const MeshPacket &mp, AdminMessage *r)
         shutdownAtMsec = (s < 0) ? 0 : (millis() + s * 1000);
         break;
     }
+    case AdminMessage_get_device_metadata_request_tag: {
+        DEBUG_MSG("Client is getting device metadata\n");
+        handleGetDeviceMetadata(mp);
+        break;
+    }
 
 #ifdef ARCH_PORTDUINO
     case AdminMessage_exit_simulator_tag:
@@ -374,6 +379,18 @@ void AdminModule::handleGetModuleConfig(const MeshPacket &req, const uint32_t co
     }
 }
 
+void AdminModule::handleGetDeviceMetadata(const MeshPacket &req) {
+    AdminMessage r = AdminMessage_init_default;
+    
+    DeviceMetadata deviceMetadata;
+    strncpy(deviceMetadata.firmware_version, myNodeInfo.firmware_version, 18);
+    deviceMetadata.device_state_version = DEVICESTATE_CUR_VER;
+
+    r.get_device_metadata_response = deviceMetadata;
+    r.which_variant = AdminMessage_get_device_metadata_response_tag;
+    myReply = allocDataProtobuf(r);
+}
+
 void AdminModule::handleGetChannel(const MeshPacket &req, uint32_t channelIndex)
 {
     if (req.decoded.want_response) {

src/modules/AdminModule.h

@@ -27,6 +27,7 @@ class AdminModule : public ProtobufModule<AdminMessage>
     void handleGetConfig(const MeshPacket &req, uint32_t configType);
     void handleGetModuleConfig(const MeshPacket &req, uint32_t configType);
     void handleGetChannel(const MeshPacket &req, uint32_t channelIndex);
+    void handleGetDeviceMetadata(const MeshPacket &req);
 
     /**
      * Setters

src/modules/PositionModule.cpp

@@ -103,6 +103,8 @@ MeshPacket *PositionModule::allocReply()
     } else
         DEBUG_MSG("Providing time to mesh %u\n", p.time);
 
+    DEBUG_MSG("Position reply: time=%i, latI=%i, lonI=-%i\n", p.time, p.latitude_i, p.longitude_i);
+
     return allocDataProtobuf(p);
 }
 
@@ -144,7 +146,6 @@ int32_t PositionModule::runOnce()
                 currentGeneration = radioGeneration;
 
                 DEBUG_MSG("Sending pos@%x:6 to mesh (wantReplies=%d)\n", node->position.pos_timestamp, requestReplies);
-
                 sendOurPosition(NODENUM_BROADCAST, requestReplies);
             }
         } else {

src/modules/RoutingModule.cpp

@@ -44,4 +44,5 @@ void RoutingModule::sendAckNak(Routing_Error err, NodeNum to, PacketId idFrom, C
 RoutingModule::RoutingModule() : ProtobufModule("routing", PortNum_ROUTING_APP, Routing_fields)
 {
     isPromiscuous = true;
+    encryptedOk = true;
 }

src/platform/esp32/ESP32Bluetooth.cpp

@@ -0,0 +1,206 @@
+#ifdef USE_NEW_ESP32_BLUETOOTH
+
+#include "configuration.h"
+#include "ESP32Bluetooth.h"
+#include "BluetoothCommon.h"
+#include "PowerFSM.h"
+#include "sleep.h"
+#include "main.h"
+#include "mesh/PhoneAPI.h"
+#include "mesh/mesh-pb-constants.h"
+#include <NimBLEDevice.h>
+
+NimBLECharacteristic *fromNumCharacteristic;
+NimBLEServer *bleServer;
+
+static bool passkeyShowing;
+static uint32_t doublepressed;
+
+class BluetoothPhoneAPI : public PhoneAPI
+{
+    /**
+     * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
+     */
+    virtual void onNowHasData(uint32_t fromRadioNum) 
+    {
+        PhoneAPI::onNowHasData(fromRadioNum);
+
+        DEBUG_MSG("BLE notify fromNum\n");
+        
+        uint8_t val[4];
+        put_le32(val, fromRadioNum);
+
+        fromNumCharacteristic->setValue(val, sizeof(val));
+        fromNumCharacteristic->notify();
+    }
+
+    /// Check the current underlying physical link to see if the client is currently connected
+    virtual bool checkIsConnected() 
+    {
+        return bleServer && bleServer->getConnectedCount() > 0;
+    }
+};
+
+static BluetoothPhoneAPI *bluetoothPhoneAPI;
+/**
+ * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
+ */
+
+class ESP32BluetoothToRadioCallback : public NimBLECharacteristicCallbacks 
+{
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic) {
+        DEBUG_MSG("To Radio onwrite\n");
+        auto val = pCharacteristic->getValue();
+        
+        bluetoothPhoneAPI->handleToRadio(val.data(), val.length());
+    }
+};
+
+class ESP32BluetoothFromRadioCallback : public NimBLECharacteristicCallbacks {
+    virtual void onRead(NimBLECharacteristic *pCharacteristic) {
+        DEBUG_MSG("From Radio onread\n");
+        uint8_t fromRadioBytes[FromRadio_size];
+        size_t numBytes = bluetoothPhoneAPI->getFromRadio(fromRadioBytes);
+
+        std::string fromRadioByteString(fromRadioBytes, fromRadioBytes + numBytes);
+
+        pCharacteristic->setValue(fromRadioByteString);
+    }
+};
+
+class ESP32BluetoothServerCallback : public NimBLEServerCallbacks 
+{
+    virtual uint32_t onPassKeyRequest() {
+
+        uint32_t passkey = 0;
+
+        if (doublepressed > 0 && (doublepressed + (30 * 1000)) > millis()) {
+            DEBUG_MSG("User has overridden passkey\n");
+            passkey = defaultBLEPin;
+        } else {
+            DEBUG_MSG("Using random passkey\n");
+            // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
+            passkey = random(100000, 999999); 
+        }
+        DEBUG_MSG("*** Enter passkey %d on the peer side ***\n", passkey);
+
+        powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
+        screen->startBluetoothPinScreen(passkey);
+        passkeyShowing = true;
+
+        return passkey;
+    }
+
+    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc) {
+        DEBUG_MSG("BLE authentication complete\n");
+
+        if (passkeyShowing) {
+            passkeyShowing = false;
+            screen->stopBluetoothPinScreen();
+        }
+    }
+
+    virtual void onDisconnect(NimBLEServer* pServer, ble_gap_conn_desc *desc) {
+        DEBUG_MSG("BLE disconnect\n");
+    }
+};
+
+static ESP32BluetoothToRadioCallback *toRadioCallbacks;
+static ESP32BluetoothFromRadioCallback *fromRadioCallbacks;
+
+void ESP32Bluetooth::shutdown()
+{
+    // Shutdown bluetooth for minimum power draw
+    DEBUG_MSG("Disable bluetooth\n");
+    //Bluefruit.Advertising.stop();
+    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    pAdvertising->reset();
+    pAdvertising->stop();
+}
+
+void ESP32Bluetooth::setup()
+{
+    DEBUG_MSG("Initialise the ESP32 bluetooth module\n");
+
+    NimBLEDevice::init(getDeviceName());
+    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
+
+    NimBLEDevice::setSecurityAuth(true, true, true);
+    NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
+    bleServer = NimBLEDevice::createServer();
+    
+    ESP32BluetoothServerCallback *serverCallbacks = new ESP32BluetoothServerCallback();
+    bleServer->setCallbacks(serverCallbacks, true);
+
+    setupService();
+    startAdvertising();
+}
+
+void ESP32Bluetooth::setupService() 
+{
+    NimBLEService *bleService = bleServer->createService(MESH_SERVICE_UUID);
+
+    //define the characteristics that the app is looking for
+    NimBLECharacteristic *ToRadioCharacteristic = bleService->createCharacteristic(TORADIO_UUID, NIMBLE_PROPERTY::WRITE | NIMBLE_PROPERTY::WRITE_AUTHEN | NIMBLE_PROPERTY::WRITE_ENC);
+    NimBLECharacteristic *FromRadioCharacteristic = bleService->createCharacteristic(FROMRADIO_UUID, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
+    fromNumCharacteristic = bleService->createCharacteristic(FROMNUM_UUID, NIMBLE_PROPERTY::NOTIFY | NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
+    
+    bluetoothPhoneAPI = new BluetoothPhoneAPI();
+
+    toRadioCallbacks = new ESP32BluetoothToRadioCallback();
+    ToRadioCharacteristic->setCallbacks(toRadioCallbacks);
+
+    fromRadioCallbacks = new ESP32BluetoothFromRadioCallback();
+    FromRadioCharacteristic->setCallbacks(fromRadioCallbacks);
+
+    bleService->start();
+}
+
+void ESP32Bluetooth::startAdvertising() 
+{
+    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    pAdvertising->reset();
+    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
+    pAdvertising->start(0);
+}
+
+/// Given a level between 0-100, update the BLE attribute
+void updateBatteryLevel(uint8_t level)
+{
+    //blebas.write(level);
+}
+
+void ESP32Bluetooth::clearBonds()
+{
+    DEBUG_MSG("Clearing bluetooth bonds!\n");
+    NimBLEDevice::deleteAllBonds();
+}
+
+void clearNVS() 
+{
+    NimBLEDevice::deleteAllBonds();
+    ESP.restart();
+}
+
+void disablePin() 
+{
+    DEBUG_MSG("User Override, disabling bluetooth pin requirement\n");
+    // keep track of when it was pressed, so we know it was within X seconds
+
+    // Flash the LED
+    setLed(true);
+    delay(100);
+    setLed(false);
+    delay(100);
+    setLed(true);
+    delay(100);
+    setLed(false);
+    delay(100);
+    setLed(true);
+    delay(100);
+    setLed(false);
+
+    doublepressed = millis();
+}
+
+#endif

src/platform/esp32/ESP32Bluetooth.h

@@ -0,0 +1,21 @@
+#ifdef USE_NEW_ESP32_BLUETOOTH
+
+#pragma once
+
+class ESP32Bluetooth
+{
+  public:
+    void setup();
+    void shutdown();
+    void clearBonds();
+
+  private:
+    void setupService();
+    void startAdvertising();
+};
+
+void setBluetoothEnable(bool on);
+void clearNVS();
+void disablePin();
+
+#endif

src/platform/esp32/architecture.h

@@ -70,6 +70,8 @@
     #define HW_VENDOR HardwareModel_NANO_G1
 #elif defined(M5STACK)
     #define HW_VENDOR HardwareModel_M5STACK
+#elif defined(STATION_G1)
+    #define HW_VENDOR HardwareModel_STATION_G1
 #endif
 
 //
@@ -101,3 +103,4 @@
 #endif
 
 #define SERIAL0_RX_GPIO 3 // Always GPIO3 on ESP32
+

src/platform/nrf52/JLINK_MONITOR.c

@@ -1,120 +1,120 @@
-/*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
-*                        The Embedded Experts                        *
-**********************************************************************
-*                                                                    *
-*       (c) 1995 - 2015  SEGGER Microcontroller GmbH & Co. KG        *
-*                                                                    *
-*       www.segger.com     Support: support@segger.com               *
-*                                                                    *
-**********************************************************************
- 
-----------------------------------------------------------------------
-File    : JLINK_MONITOR.c
-Purpose : Implementation of debug monitor for J-Link monitor mode debug on Cortex-M devices.
---------  END-OF-HEADER  ---------------------------------------------
-*/
-
-#include "JLINK_MONITOR.h"
-
-/*********************************************************************
-*
-*       Configuration
-*
-**********************************************************************
-*/
-
-/*********************************************************************
-*
-*       Defines
-*
-**********************************************************************
-*/
-
-/*********************************************************************
-*
-*       Types
-*
-**********************************************************************
-*/
-
-/*********************************************************************
-*
-*       Static data
-*
-**********************************************************************
-*/
-
-volatile int MAIN_MonCnt;   // Incremented in JLINK_MONITOR_OnPoll() while CPU is in debug mode
-
-/*********************************************************************
-*
-*       Local functions
-*
-**********************************************************************
-*/
-
-/*********************************************************************
-*
-*       Global functions
-*
-**********************************************************************
-*/
-
-/********************************************************************* 
-* 
-*       JLINK_MONITOR_OnExit()
-* 
-*  Function description 
-*    Called from DebugMon_Handler(), once per debug exit.
-*    May perform some target specific operations to be done on debug mode exit.
-* 
-*  Notes 
-*    (1) Must not keep the CPU busy for more than 100 ms
-*/ 
-void JLINK_MONITOR_OnExit(void) {
-  //
-  // Add custom code here
-  //
-//  BSP_ClrLED(0);
-}
-
-/********************************************************************* 
-* 
-*       JLINK_MONITOR_OnEnter()
-* 
-*  Function description 
-*    Called from DebugMon_Handler(), once per debug entry.
-*    May perform some target specific operations to be done on debug mode entry
-* 
-*  Notes 
-*    (1) Must not keep the CPU busy for more than 100 ms
-*/ 
-void JLINK_MONITOR_OnEnter(void) {
-  //
-  // Add custom code here
-  //
-//  BSP_SetLED(0);
-//  BSP_ClrLED(1);
-}
-
-/********************************************************************* 
-* 
-*       JLINK_MONITOR_OnPoll()
-* 
-*  Function description 
-*    Called periodically from DebugMon_Handler(), to perform some actions that need to be performed periodically during debug mode.
-* 
-*  Notes 
-*    (1) Must not keep the CPU busy for more than 100 ms
-*/
-void JLINK_MONITOR_OnPoll(void) {
-  //
-  // Add custom code here
-  //
-  MAIN_MonCnt++;
-//  BSP_ToggleLED(0);
-//  _Delay(500000);
-}
-
-/****** End Of File *************************************************/
+/*********************************************************************
+*                SEGGER Microcontroller GmbH & Co. KG                *
+*                        The Embedded Experts                        *
+**********************************************************************
+*                                                                    *
+*       (c) 1995 - 2015  SEGGER Microcontroller GmbH & Co. KG        *
+*                                                                    *
+*       www.segger.com     Support: support@segger.com               *
+*                                                                    *
+**********************************************************************
+ 
+----------------------------------------------------------------------
+File    : JLINK_MONITOR.c
+Purpose : Implementation of debug monitor for J-Link monitor mode debug on Cortex-M devices.
+--------  END-OF-HEADER  ---------------------------------------------
+*/
+
+#include "JLINK_MONITOR.h"
+
+/*********************************************************************
+*
+*       Configuration
+*
+**********************************************************************
+*/
+
+/*********************************************************************
+*
+*       Defines
+*
+**********************************************************************
+*/
+
+/*********************************************************************
+*
+*       Types
+*
+**********************************************************************
+*/
+
+/*********************************************************************
+*
+*       Static data
+*
+**********************************************************************
+*/
+
+volatile int MAIN_MonCnt;   // Incremented in JLINK_MONITOR_OnPoll() while CPU is in debug mode
+
+/*********************************************************************
+*
+*       Local functions
+*
+**********************************************************************
+*/
+
+/*********************************************************************
+*
+*       Global functions
+*
+**********************************************************************
+*/
+
+/********************************************************************* 
+* 
+*       JLINK_MONITOR_OnExit()
+* 
+*  Function description 
+*    Called from DebugMon_Handler(), once per debug exit.
+*    May perform some target specific operations to be done on debug mode exit.
+* 
+*  Notes 
+*    (1) Must not keep the CPU busy for more than 100 ms
+*/ 
+void JLINK_MONITOR_OnExit(void) {
+  //
+  // Add custom code here
+  //
+//  BSP_ClrLED(0);
+}
+
+/********************************************************************* 
+* 
+*       JLINK_MONITOR_OnEnter()
+* 
+*  Function description 
+*    Called from DebugMon_Handler(), once per debug entry.
+*    May perform some target specific operations to be done on debug mode entry
+* 
+*  Notes 
+*    (1) Must not keep the CPU busy for more than 100 ms
+*/ 
+void JLINK_MONITOR_OnEnter(void) {
+  //
+  // Add custom code here
+  //
+//  BSP_SetLED(0);
+//  BSP_ClrLED(1);
+}
+
+/********************************************************************* 
+* 
+*       JLINK_MONITOR_OnPoll()
+* 
+*  Function description 
+*    Called periodically from DebugMon_Handler(), to perform some actions that need to be performed periodically during debug mode.
+* 
+*  Notes 
+*    (1) Must not keep the CPU busy for more than 100 ms
+*/
+void JLINK_MONITOR_OnPoll(void) {
+  //
+  // Add custom code here
+  //
+  MAIN_MonCnt++;
+//  BSP_ToggleLED(0);
+//  _Delay(500000);
+}
+
+/****** End Of File *************************************************/

src/platform/nrf52/JLINK_MONITOR.h

@@ -1,27 +1,27 @@
-/*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
-*                        The Embedded Experts                        *
-**********************************************************************
-*                                                                    *
-*       (c) 1995 - 2015  SEGGER Microcontroller GmbH & Co. KG        *
-*                                                                    *
-*       www.segger.com     Support: support@segger.com               *
-*                                                                    *
-**********************************************************************
- 
-----------------------------------------------------------------------
-File    : JLINK_MONITOR.h
-Purpose : Header file of debug monitor for J-Link monitor mode debug on Cortex-M devices.
---------  END-OF-HEADER  ---------------------------------------------
-*/
-
-#ifndef JLINK_MONITOR_H
-#define JLINK_MONITOR_H
-
-void JLINK_MONITOR_OnExit  (void);
-void JLINK_MONITOR_OnEnter (void);
-void JLINK_MONITOR_OnPoll  (void);
-
-#endif
-
-/****** End Of File *************************************************/
+/*********************************************************************
+*                SEGGER Microcontroller GmbH & Co. KG                *
+*                        The Embedded Experts                        *
+**********************************************************************
+*                                                                    *
+*       (c) 1995 - 2015  SEGGER Microcontroller GmbH & Co. KG        *
+*                                                                    *
+*       www.segger.com     Support: support@segger.com               *
+*                                                                    *
+**********************************************************************
+ 
+----------------------------------------------------------------------
+File    : JLINK_MONITOR.h
+Purpose : Header file of debug monitor for J-Link monitor mode debug on Cortex-M devices.
+--------  END-OF-HEADER  ---------------------------------------------
+*/
+
+#ifndef JLINK_MONITOR_H
+#define JLINK_MONITOR_H
+
+void JLINK_MONITOR_OnExit  (void);
+void JLINK_MONITOR_OnEnter (void);
+void JLINK_MONITOR_OnPoll  (void);
+
+#endif
+
+/****** End Of File *************************************************/

src/platform/nrf52/architecture.h

@@ -40,6 +40,8 @@
     #define HW_VENDOR HardwareModel_T_ECHO
 #elif defined(NORDIC_PCA10059)
     #define HW_VENDOR HardwareModel_NRF52840_PCA10059
+#elif defined(PRIVATE_HW)
+    #define HW_VENDOR HardwareModel_PRIVATE_HW
 #else
     #define HW_VENDOR HardwareModel_NRF52_UNKNOWN
 #endif

src/platform/rp2040/architecture.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#define ARCH_RP2040
+
+#if defined(PRIVATE_HW)
+    #define HW_VENDOR HardwareModel_PRIVATE_HW
+#endif

src/platform/rp2040/main-rp2040.cpp

@@ -0,0 +1,30 @@
+#include "configuration.h"
+#include <stdio.h>
+#include <pico/unique_id.h>
+
+void setBluetoothEnable(bool on)
+{
+    // not needed
+}
+
+void cpuDeepSleep(uint64_t msecs)
+{
+    // not needed
+}
+
+void updateBatteryLevel(uint8_t level)
+{
+    // not needed
+}
+
+void getMacAddr(uint8_t *dmac)
+{
+    pico_unique_board_id_t src;
+    pico_get_unique_board_id(&src);
+    dmac[5] = src.id[0];
+    dmac[4] = src.id[1];
+    dmac[3] = src.id[2];
+    dmac[2] = src.id[3];
+    dmac[1] = src.id[4];
+    dmac[0] = src.id[5];
+}

src/platform/rp2040/rp2040CryptoEngine.cpp

@@ -0,0 +1,36 @@
+#include "configuration.h"
+#include "CryptoEngine.h"
+#include "aes.hpp"
+
+class RP2040CryptoEngine : public CryptoEngine
+{
+  public:
+    RP2040CryptoEngine() {}
+
+    ~RP2040CryptoEngine() {}
+
+    /**
+     * Encrypt a packet
+     *
+     * @param bytes is updated in place
+     */
+    virtual void encrypt(uint32_t fromNode, uint64_t packetNum, size_t numBytes, uint8_t *bytes) override
+    {
+        if (key.length > 0) {
+            AES_ctx ctx;
+            initNonce(fromNode, packetNum);
+            AES_init_ctx_iv(&ctx, key.bytes, nonce);
+            AES_CTR_xcrypt_buffer(&ctx, bytes, numBytes);
+        }
+    }
+
+    virtual void decrypt(uint32_t fromNode, uint64_t packetNum, size_t numBytes, uint8_t *bytes) override
+    {
+        // For CTR, the implementation is the same
+        encrypt(fromNode, packetNum, numBytes, bytes);
+    }
+
+  private:
+};
+
+CryptoEngine *crypto = new RP2040CryptoEngine();

src/shutdown.h

@@ -21,14 +21,21 @@ void powerCommandsCheck()
     if (shutdownAtMsec) {
         screen->startShutdownScreen();
         playBeep();
+#ifdef PIN_LED1
         ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
         ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+        ledOff(PIN_LED3);
+#endif
     }
 #endif
 
     if (shutdownAtMsec && millis() > shutdownAtMsec) {
         DEBUG_MSG("Shutting down from admin command\n");
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
         if (axp192_found == true) {
             playShutdownMelody();
             power->shutdown();

src/sleep.cpp

@@ -21,7 +21,7 @@
 esp_sleep_source_t wakeCause; // the reason we booted this time
 #endif
 
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
 #include "axp20x.h"
 extern AXP20X_Class axp;
 #endif
@@ -80,7 +80,7 @@ void setLed(bool ledOn)
     digitalWrite(LED_PIN, ledOn ^ LED_INVERTED);
 #endif
 
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     if (axp192_found) {
         // blink the axp led
         axp.setChgLEDMode(ledOn ? AXP20X_LED_LOW_LEVEL : AXP20X_LED_OFF);
@@ -92,7 +92,7 @@ void setGPSPower(bool on)
 {
     DEBUG_MSG("Setting GPS power=%d\n", on);
 
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     if (axp192_found)
         axp.setPowerOutPut(AXP192_LDO3, on ? AXP202_ON : AXP202_OFF); // GPS main power
 #endif
@@ -187,7 +187,7 @@ void doDeepSleep(uint64_t msecToWake)
     digitalWrite(VEXT_ENABLE, 1); // turn off the display power
 #endif
 
-#ifdef TBEAM_V10
+#ifdef HAS_AXP192
     if (axp192_found) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
         // We no longer do that, because our light-sleep current draws are low enough and it provides fast start/low cost

variants/pico/platformio.ini

@@ -0,0 +1,17 @@
+[env:pico]
+extends = rp2040_base
+board = pico
+upload_protocol = picotool
+
+# add our variants files to the include and src paths
+build_flags = ${rp2040_base.build_flags} 
+  -DPRIVATE_HW
+  -Ivariants/pico
+  -DARDUINO_AVR_NANO_EVERY
+  -DDEBUG_RP2040_WIRE
+  -DDEBUG_RP2040_SPI
+  -DDEBUG_RP2040_CORE
+  -DDEBUG_RP2040_PORT=Serial
+  -DUSE_TINYUSB
+lib_deps =
+  ${rp2040_base.lib_deps}

variants/pico/variant.h

@@ -0,0 +1,52 @@
+// #define RADIOLIB_CUSTOM_ARDUINO 1
+// #define RADIOLIB_TONE_UNSUPPORTED 1
+// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
+
+#define ARDUINO_ARCH_AVR
+
+#define CBC 0
+#define CTR 1
+#define ECB 0
+
+#define NO_GPS 1
+#define USE_SH1106 1
+#undef GPS_SERIAL_NUM
+
+// #define I2C_SDA 6
+// #define I2C_SCL 7
+
+#define BUTTON_PIN 17
+#define EXT_NOTIFY_OUT 4
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+
+#define USE_RF95
+#define USE_SX1262
+
+#undef RF95_SCK
+#undef RF95_MISO
+#undef RF95_MOSI
+#undef RF95_NSS
+
+#define RF95_SCK 10
+#define RF95_MISO 12
+#define RF95_MOSI 11
+#define RF95_NSS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_E22
+#endif
+
+#include <Adafruit_TinyUSB.h>

variants/portduino/platformio.ini

@@ -2,10 +2,11 @@
 [portduino_base]
 build_src_filter = 
   ${env.build_src_filter} 
-  -<esp32/> 
+  -<platform/esp32/> 
   -<nimble/> 
-  -<nrf52/> 
-  -<stm32wl/> 
+  -<platform/nrf52/> 
+  -<platform/stm32wl/> 
+  -<platform/rp2040>
   -<mesh/http/> 
   -<modules/esp32>
   -<modules/Telemetry>
@@ -15,7 +16,7 @@ lib_deps =
   ${networking_base.lib_deps}
   rweather/Crypto
   https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74
-build_flags = ${arduino_base.build_flags} -Isrc/portduino
+build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino
 
 [env:native]
 platform = https://github.com/meshtastic/platform-native.git 

variants/station-g1/platformio.ini

@@ -0,0 +1,8 @@
+; The 1.0 release of the nano-g1 board 
+[env:station-g1]
+extends = esp32_base
+board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
+build_flags = 
+  ${esp32_base.build_flags} -D STATION_G1  -I variants/station-g1

variants/station-g1/variant.h

@@ -0,0 +1,41 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+#define BUTTON_PIN 36     // The middle button GPIO on the Nano G1
+//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
+#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
+
+// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_RF95
+#define USE_SX1262
+
+#define LORA_DIO0 26 // a No connect on the SX1262 module
+#define LORA_RESET 23
+#define LORA_DIO1 33 // SX1262 IRQ
+#define LORA_DIO2 32 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+//#define SX126X_E22 // Not really an E22 
+// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+#define SX126X_MAX_POWER 16  //Ensure the PA does not exceed the saturation output power. More Info:https://uniteng.com/wiki/doku.php?id=meshtastic:station#rf_design_-_lora_station_edition_g1
+#endif
+
+#define BATTERY_PIN 35    // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_SENSE_SAMPLES 30  //Set the number of samples, It has an effect of increasing sensitivity.
+#define ADC_MULTIPLIER 6.45
+#define BAT_FULLVOLT 12600
+#define BAT_EMPTYVOLT 8200
+#define BAT_CHARGINGVOLT 12600
+#define BAT_NOBATVOLT 6690
+
+// different screen
+#define USE_SH1106

variants/tbeam/variant.h

@@ -34,4 +34,4 @@
 // Leave undefined to disable our PMU IRQ handler.  DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
 // and waking from light sleep
 // #define PMU_IRQ 35
-#define AXP192_SLAVE_ADDRESS 0x34
+#define HAS_AXP192

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 1
 minor = 3
-build = 28
+build = 37