Update version.properties

Combine WIFI state into an enum

.github/workflows/main_matrix.yml

@@ -38,6 +38,7 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           
@@ -95,6 +96,7 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
 

bin/build-all.sh

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

platformio.ini

@@ -103,13 +103,13 @@ debug_init_break = tbreak setup
 build_flags =
   ${arduino_base.build_flags} -Wall -Wextra -Isrc/esp32 -Isrc/esp32-mfix-esp32-psram-cache-issue -lnimble -std=c++11 
   -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial -DUSE_NEW_ESP32_BLUETOOTH
+  -DAXP_DEBUG_PORT=Serial -DUSE_NEW_ESP32_BLUETOOTH -DCONFIG_BT_NIMBLE_ENABLED -DCONFIG_NIMBLE_CPP_LOG_LEVEL=1
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git
-  h2zero/NimBLE-Arduino@1.3.7
+  h2zero/NimBLE-Arduino@1.4.0
   arduino-libraries/NTPClient@^3.1.0
   lorol/LittleFS_esp32@^1.0.6
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460

src/ButtonThread.h

@@ -144,8 +144,15 @@ class ButtonThread : public concurrency::OSThread
                 screen->startShutdownScreen();
                 DEBUG_MSG("Shutdown from long press");
                 playBeep();
+#ifdef PIN_LED1
                 ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
                 ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+                ledOff(PIN_LED3);
+#endif
                 shutdown_on_long_stop = true;
             }
 #endif

src/FSCommon.cpp

@@ -1,6 +1,46 @@
 #include "configuration.h"
 #include "FSCommon.h"
 
+
+bool copyFile(const char* from, const char* to)
+{
+#ifdef FSCom
+    unsigned char cbuffer[16];
+   
+    File f1 = FSCom.open(from, FILE_O_READ);
+    if (!f1){
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+
+    File f2 = FSCom.open(to, FILE_O_WRITE);
+    if (!f2) {
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+   
+    while (f1.available() > 0) {
+        byte i = f1.read(cbuffer, 16);
+        f2.write(cbuffer, i);
+    }
+   
+    f2.close();
+    f1.close();
+    return true;
+#endif
+}
+
+bool renameFile(const char* pathFrom, const char* pathTo)
+{
+#ifdef FSCom
+    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom) ) {
+        return true;
+    } else{
+        return false;
+    }
+#endif
+}
+
 void listDir(const char * dirname, uint8_t levels)
 {
 #ifdef FSCom

src/FSCommon.h

@@ -31,5 +31,6 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
+bool renameFile(const char* pathFrom, const char* pathTo);
 void listDir(const char * dirname, uint8_t levels);
 void rmDir(const char * dirname);

src/esp32/ESP32Bluetooth.cpp

@@ -62,9 +62,9 @@ PhoneAPI *bluetoothPhoneAPI;
 class ESP32BluetoothToRadioCallback : public NimBLECharacteristicCallbacks {
     virtual void onWrite(NimBLECharacteristic *pCharacteristic) {
         DEBUG_MSG("To Radio onwrite\n");
-        auto valueString = pCharacteristic->getValue();
+        auto val = pCharacteristic->getValue();
         
-        bluetoothPhoneAPI->handleToRadio(reinterpret_cast<const uint8_t*>(&valueString[0]), pCharacteristic->getDataLength());
+        bluetoothPhoneAPI->handleToRadio(val.data(), val.length());
     }
 };
 

src/esp32/architecture.h

@@ -70,6 +70,8 @@
     #define HW_VENDOR HardwareModel_NANO_G1
 #elif defined(M5STACK)
     #define HW_VENDOR HardwareModel_M5STACK
+#elif defined(STATION_G1)
+    #define HW_VENDOR HardwareModel_STATION_G1
 #endif
 
 //
@@ -101,3 +103,4 @@
 #endif
 
 #define SERIAL0_RX_GPIO 3 // Always GPIO3 on ESP32
+

src/gps/GPS.cpp

@@ -330,7 +330,7 @@ int32_t GPS::runOnce()
         if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
             DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
             devicestate.did_gps_reset = false;
-            nodeDB.saveToDisk();
+            nodeDB.saveDeviceStateToDisk();
         }
 #endif
     }

src/graphics/Screen.cpp

@@ -65,6 +65,11 @@ static FrameCallback normalFrames[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 static uint32_t targetFramerate = IDLE_FRAMERATE;
 static char btPIN[16] = "888888";
     
+// This defines the layout of the compass.
+// If true, North with remain static at the top of the compass.
+// If false, your current heading is static at the top of the compass.
+bool compassNorthTop = false;
+
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
 
@@ -595,7 +600,7 @@ class Point
     void rotate(float radian)
     {
         float cos = cosf(radian), sin = sinf(radian);
-        float rx = x * cos - y * sin, ry = x * sin + y * cos;
+        float rx = x * cos + y * sin, ry = -x * sin + y * cos;
 
         x = rx;
         y = ry;
@@ -609,8 +614,10 @@ class Point
 
     void scale(float f)
     {
+        //We use -f here to counter the flip that happens
+        //on the y axis when drawing and rotating on screen
         x *= f;
-        y *= f;
+        y *= -f;
     }
 };
 
@@ -682,16 +689,21 @@ static void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t comp
     drawLine(display, rightArrow, tip);
 }
 
-// Draw the compass heading
+// Draw north
-static void drawCompassHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
+static void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
 {
-    Point N1(-0.04f, -0.65f), N2(0.04f, -0.65f);
+    //If north is supposed to be at the top of the compass we want rotation to be +0
-    Point N3(-0.04f, -0.55f), N4(0.04f, -0.55f);
+    if(compassNorthTop)
+        myHeading = -0;
+    
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
     Point *rosePoints[] = {&N1, &N2, &N3, &N4};
 
     for (int i = 0; i < 4; i++) {
-        rosePoints[i]->rotate(myHeading);
+        // North on compass will be negative of heading
-        rosePoints[i]->scale(-1 * COMPASS_DIAM);
+        rosePoints[i]->rotate(-myHeading);
+        rosePoints[i]->scale(COMPASS_DIAM);
         rosePoints[i]->translate(compassX, compassY);
     }
     drawLine(display, N1, N3);
@@ -762,7 +774,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (ourNode && hasPosition(ourNode)) {
         Position &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
-        drawCompassHeading(display, compassX, compassY, myHeading);
+        drawCompassNorth(display, compassX, compassY, myHeading);
 
         if (hasPosition(node)) {
             // display direction toward node
@@ -775,12 +787,13 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
             else
                 snprintf(distStr, sizeof(distStr), "%.1f km", d / 1000);
 
-            // FIXME, also keep the guess at the operators heading and add/substract
-            // it.  currently we don't do this and instead draw north up only.
             float bearingToOther =
-                GeoCoord::bearing(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+                GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
-            float headingRadian = bearingToOther - myHeading;
+            // If the top of the compass is a static north then bearingToOther can be drawn on the compass directly
-            drawNodeHeading(display, compassX, compassY, headingRadian);
+            // If the top of the compass is not a static north we need adjust bearingToOther based on heading
+            if(!compassNorthTop)
+                bearingToOther -= myHeading;
+            drawNodeHeading(display, compassX, compassY, bearingToOther);
         }
     }
     if (!hasNodeHeading)
@@ -935,9 +948,11 @@ void Screen::setup()
     handleSetOn(true);
 
     // On some ssd1306 clones, the first draw command is discarded, so draw it
-    // twice initially.
+    // twice initially. Skip this for EINK Displays to save a few seconds during boot
     ui.update();
+#ifndef USE_EINK
     ui.update();
+#endif
     serialSinceMsec = millis();
 
     // Subscribe to status updates
@@ -1355,7 +1370,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 
     if (isSoftAPForced()) {
         display->drawString(x, y, String("WiFi: Software AP (Admin)"));
-    } else if (config.wifi.ap_mode) {
+    } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
         display->drawString(x, y, String("WiFi: Software AP"));
     } else if (WiFi.status() != WL_CONNECTED) {
         display->drawString(x, y, String("WiFi: Not Connected"));
@@ -1378,8 +1393,8 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     - WL_NO_SHIELD: assigned when no WiFi shield is present;
 
     */
-    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.wifi.ap_mode) {
+    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
-        if (config.wifi.ap_mode || isSoftAPForced()) {
+        if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
 
             // Number of connections to the AP. Default max for the esp32 is 4
@@ -1471,7 +1486,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         }
 
     } else {
-        if (config.wifi.ap_mode) {
+        if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
             if ((millis() / 10000) % 2) {
                 display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
             } else {
@@ -1665,4 +1680,5 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 }
 
 } // namespace graphics
+
 #endif // HAS_SCREEN

src/mesh/NodeDB.cpp

@@ -414,7 +414,7 @@ bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_
         // brief window of risk here ;-)
         if (FSCom.exists(filename) && !FSCom.remove(filename))
             DEBUG_MSG("Warning: Can't remove old pref file\n");
-        if (!FSCom.rename(filenameTmp.c_str(), filename))
+        if (!renameFile(filenameTmp.c_str(), filename))
             DEBUG_MSG("Error: can't rename new pref file\n");
     } else {
         DEBUG_MSG("Can't write prefs\n");
@@ -435,6 +435,16 @@ void NodeDB::saveChannelsToDisk()
     }
 }
 
+void NodeDB::saveDeviceStateToDisk() 
+{
+    if (!devicestate.no_save) {
+#ifdef FSCom
+        FSCom.mkdir("/prefs");
+#endif
+        saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+    }
+}
+
 void NodeDB::saveToDisk()
 {
     if (!devicestate.no_save) {

src/mesh/NodeDB.h

@@ -44,7 +44,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(), saveChannelsToDisk();
+    void saveToDisk(), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or

src/mesh/generated/config.pb.c

@@ -34,3 +34,4 @@ PB_BIND(Config_LoRaConfig, Config_LoRaConfig, 2)
 
 
 
+

src/mesh/generated/config.pb.h

@@ -51,6 +51,12 @@ typedef enum _Config_PowerConfig_ChargeCurrent {
     Config_PowerConfig_ChargeCurrent_MA1320 = 16 
 } Config_PowerConfig_ChargeCurrent;
 
+typedef enum _Config_WiFiConfig_WiFiMode { 
+    Config_WiFiConfig_WiFiMode_Client = 0, 
+    Config_WiFiConfig_WiFiMode_AccessPoint = 1, 
+    Config_WiFiConfig_WiFiMode_AccessPointHidden = 2 
+} Config_WiFiConfig_WiFiMode;
+
 typedef enum _Config_DisplayConfig_GpsCoordinateFormat { 
     Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDec = 0, 
     Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDMS = 1, 
@@ -99,6 +105,7 @@ typedef struct _Config_DisplayConfig {
     uint32_t screen_on_secs;
     Config_DisplayConfig_GpsCoordinateFormat gps_format;
     uint32_t auto_screen_carousel_secs;
+    bool compass_north_top;
 } Config_DisplayConfig;
 
 typedef struct _Config_LoRaConfig { 
@@ -138,10 +145,10 @@ typedef struct _Config_PowerConfig {
 } Config_PowerConfig;
 
 typedef struct _Config_WiFiConfig { 
+    bool enabled;
+    Config_WiFiConfig_WiFiMode mode;
     char ssid[33];
     char psk[64];
-    bool ap_mode;
-    bool ap_hidden;
 } Config_WiFiConfig;
 
 typedef struct _Config { 
@@ -170,6 +177,10 @@ typedef struct _Config {
 #define _Config_PowerConfig_ChargeCurrent_MAX Config_PowerConfig_ChargeCurrent_MA1320
 #define _Config_PowerConfig_ChargeCurrent_ARRAYSIZE ((Config_PowerConfig_ChargeCurrent)(Config_PowerConfig_ChargeCurrent_MA1320+1))
 
+#define _Config_WiFiConfig_WiFiMode_MIN Config_WiFiConfig_WiFiMode_Client
+#define _Config_WiFiConfig_WiFiMode_MAX Config_WiFiConfig_WiFiMode_AccessPointHidden
+#define _Config_WiFiConfig_WiFiMode_ARRAYSIZE ((Config_WiFiConfig_WiFiMode)(Config_WiFiConfig_WiFiMode_AccessPointHidden+1))
+
 #define _Config_DisplayConfig_GpsCoordinateFormat_MIN Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDec
 #define _Config_DisplayConfig_GpsCoordinateFormat_MAX Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOSGR
 #define _Config_DisplayConfig_GpsCoordinateFormat_ARRAYSIZE ((Config_DisplayConfig_GpsCoordinateFormat)(Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOSGR+1))
@@ -192,15 +203,15 @@ extern "C" {
 #define Config_DeviceConfig_init_default         {_Config_DeviceConfig_Role_MIN, 0, 0, 0, ""}
 #define Config_PositionConfig_init_default       {0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_default          {_Config_PowerConfig_ChargeCurrent_MIN, 0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_WiFiConfig_init_default           {"", "", 0, 0}
+#define Config_WiFiConfig_init_default           {0, _Config_WiFiConfig_WiFiMode_MIN, "", ""}
-#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0}
+#define Config_DisplayConfig_init_default        {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0}
 #define Config_LoRaConfig_init_default           {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, {0, 0, 0}}
 #define Config_init_zero                         {0, {Config_DeviceConfig_init_zero}}
 #define Config_DeviceConfig_init_zero            {_Config_DeviceConfig_Role_MIN, 0, 0, 0, ""}
 #define Config_PositionConfig_init_zero          {0, 0, 0, 0, 0, 0, 0}
 #define Config_PowerConfig_init_zero             {_Config_PowerConfig_ChargeCurrent_MIN, 0, 0, 0, 0, 0, 0, 0, 0}
-#define Config_WiFiConfig_init_zero              {"", "", 0, 0}
+#define Config_WiFiConfig_init_zero              {0, _Config_WiFiConfig_WiFiMode_MIN, "", ""}
-#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0}
+#define Config_DisplayConfig_init_zero           {0, _Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0}
 #define Config_LoRaConfig_init_zero              {0, _Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, {0, 0, 0}}
 
 /* Field tags (for use in manual encoding/decoding) */
@@ -212,6 +223,7 @@ extern "C" {
 #define Config_DisplayConfig_screen_on_secs_tag  1
 #define Config_DisplayConfig_gps_format_tag      2
 #define Config_DisplayConfig_auto_screen_carousel_secs_tag 3
+#define Config_DisplayConfig_compass_north_top_tag 4
 #define Config_LoRaConfig_tx_power_tag           1
 #define Config_LoRaConfig_modem_preset_tag       2
 #define Config_LoRaConfig_bandwidth_tag          3
@@ -238,10 +250,10 @@ extern "C" {
 #define Config_PowerConfig_sds_secs_tag          10
 #define Config_PowerConfig_ls_secs_tag           11
 #define Config_PowerConfig_min_wake_secs_tag     12
-#define Config_WiFiConfig_ssid_tag               1
+#define Config_WiFiConfig_enabled_tag            1
-#define Config_WiFiConfig_psk_tag                2
+#define Config_WiFiConfig_mode_tag               2
-#define Config_WiFiConfig_ap_mode_tag            3
+#define Config_WiFiConfig_ssid_tag               3
-#define Config_WiFiConfig_ap_hidden_tag          4
+#define Config_WiFiConfig_psk_tag                4
 #define Config_device_tag                        1
 #define Config_position_tag                      2
 #define Config_power_tag                         3
@@ -300,17 +312,18 @@ X(a, STATIC,   SINGULAR, UINT32,   min_wake_secs,    12)
 #define Config_PowerConfig_DEFAULT NULL
 
 #define Config_WiFiConfig_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, STRING,   ssid,              1) \
+X(a, STATIC,   SINGULAR, BOOL,     enabled,           1) \
-X(a, STATIC,   SINGULAR, STRING,   psk,               2) \
+X(a, STATIC,   SINGULAR, UENUM,    mode,              2) \
-X(a, STATIC,   SINGULAR, BOOL,     ap_mode,           3) \
+X(a, STATIC,   SINGULAR, STRING,   ssid,              3) \
-X(a, STATIC,   SINGULAR, BOOL,     ap_hidden,         4)
+X(a, STATIC,   SINGULAR, STRING,   psk,               4)
 #define Config_WiFiConfig_CALLBACK NULL
 #define Config_WiFiConfig_DEFAULT NULL
 
 #define Config_DisplayConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   screen_on_secs,    1) \
 X(a, STATIC,   SINGULAR, UENUM,    gps_format,        2) \
-X(a, STATIC,   SINGULAR, UINT32,   auto_screen_carousel_secs,   3)
+X(a, STATIC,   SINGULAR, UINT32,   auto_screen_carousel_secs,   3) \
+X(a, STATIC,   SINGULAR, BOOL,     compass_north_top,   4)
 #define Config_DisplayConfig_CALLBACK NULL
 #define Config_DisplayConfig_DEFAULT NULL
 
@@ -347,7 +360,7 @@ extern const pb_msgdesc_t Config_LoRaConfig_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define Config_DeviceConfig_size                 42
-#define Config_DisplayConfig_size                14
+#define Config_DisplayConfig_size                16
 #define Config_LoRaConfig_size                   67
 #define Config_PositionConfig_size               30
 #define Config_PowerConfig_size                  45

src/mesh/generated/localonly.pb.h

@@ -138,7 +138,7 @@ extern const pb_msgdesc_t LocalModuleConfig_msg;
 #define LocalModuleConfig_fields &LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define LocalConfig_size                         319
+#define LocalConfig_size                         321
 #define LocalModuleConfig_size                   268
 
 #ifdef __cplusplus

src/mesh/generated/mesh.pb.h

@@ -71,6 +71,8 @@ typedef enum _HardwareModel {
     HardwareModel_DR_DEV = 43, 
     /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
     HardwareModel_M5STACK = 44, 
+    /* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station */
+    HardwareModel_STATION_G1 = 45, 
     /* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. */
     HardwareModel_PRIVATE_HW = 255 
 } HardwareModel;

src/mesh/http/ContentHandler.cpp

@@ -610,7 +610,7 @@ void handleReport(HTTPRequest *req, HTTPResponse *res)
 
     // data->wifi
     String ipStr;
-    if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
         ipStr = String(WiFi.softAPIP().toString());
     } else {
         ipStr = String(WiFi.localIP().toString());

src/mesh/http/WiFiAPClient.cpp

@@ -191,10 +191,14 @@ bool initWifi(bool forceSoftAP)
 
         if (forceSoftAP) {
             DEBUG_MSG("WiFi ... Forced AP Mode\n");
-        } else if (config.wifi.ap_mode) {
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint) {
             DEBUG_MSG("WiFi ... AP Mode\n");
-        } else {
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
+            DEBUG_MSG("WiFi ... Hidden AP Mode\n");
+        } else if (config.wifi.mode == Config_WiFiConfig_WiFiMode_Client) {
             DEBUG_MSG("WiFi ... Client Mode\n");
+        } else {
+            DEBUG_MSG("WiFi ... WiFi Disabled\n");
         }
 
         createSSLCert();
@@ -203,7 +207,7 @@ bool initWifi(bool forceSoftAP)
             wifiPsw = NULL;
 
         if (*wifiName || forceSoftAP) {
-            if (config.wifi.ap_mode || forceSoftAP) {
+            if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || forceSoftAP) {
 
                 IPAddress apIP(192, 168, 42, 1);
                 WiFi.onEvent(WiFiEvent);
@@ -218,7 +222,7 @@ bool initWifi(bool forceSoftAP)
                 } else {
 
                     // If AP is configured to be hidden hidden
-                    if (config.wifi.ap_hidden) {
+                    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden) {
 
                         // The configurations on softAP are from the espresif library
                         int ok = WiFi.softAP(wifiName, wifiPsw, 1, 1, 4);
@@ -373,7 +377,7 @@ static void WiFiEvent(WiFiEvent_t event)
 
 void handleDNSResponse()
 {
-    if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPoint || config.wifi.mode == Config_WiFiConfig_WiFiMode_AccessPointHidden || isSoftAPForced()) {
         dnsServer.processNextRequest();
     }
 }

src/modules/RoutingModule.cpp

@@ -44,4 +44,5 @@ void RoutingModule::sendAckNak(Routing_Error err, NodeNum to, PacketId idFrom, C
 RoutingModule::RoutingModule() : ProtobufModule("routing", PortNum_ROUTING_APP, Routing_fields)
 {
     isPromiscuous = true;
+    encryptedOk = true;
 }

src/shutdown.h

@@ -21,8 +21,15 @@ void powerCommandsCheck()
     if (shutdownAtMsec) {
         screen->startShutdownScreen();
         playBeep();
+#ifdef PIN_LED1
         ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
         ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+        ledOff(PIN_LED3);
+#endif
     }
 #endif
 

variants/station-g1/platformio.ini

@@ -0,0 +1,8 @@
+; The 1.0 release of the nano-g1 board 
+[env:station-g1]
+extends = esp32_base
+board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
+build_flags = 
+  ${esp32_base.build_flags} -D STATION_G1  -I variants/station-g1

variants/station-g1/variant.h

@@ -0,0 +1,36 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+#define BUTTON_PIN 36     // The middle button GPIO on the Nano G1
+//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
+#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
+
+// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_RF95
+#define USE_SX1262
+
+#define LORA_DIO0 26 // a No connect on the SX1262 module
+#define LORA_RESET 23
+#define LORA_DIO1 33 // SX1262 IRQ
+#define LORA_DIO2 32 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+//#define SX126X_E22 // Not really an E22 
+// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+#endif
+
+#define BATTERY_PIN 35    // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_SENSE_SAMPLES 30  //Set the number of samples, It has an effect of increasing sensitivity.
+#define ADC_MULTIPLIER 2.15
+
+// different screen
+#define USE_SH1106

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 1
 minor = 3
-build = 28
+build = 32