1.3.30

Update Screen.cpp

.github/workflows/main_matrix.yml

@@ -38,6 +38,7 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           
@@ -95,6 +96,7 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
 

bin/build-all.sh

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

bin/platformio-custom.py

@@ -17,7 +17,7 @@ Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmare version " + verObj['long'])
+print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
 # print("path is" + ','.join(sys.path))
 
 # General options that are passed to the C and C++ compilers

bin/readprops.py

@@ -32,6 +32,6 @@ def readProps(prefsLoc):
         # traceback.print_exc()
         verObj['long'] = verObj['short']
 
-    # print("firmare version " + verStr)
+    # print("firmware version " + verStr)
     return verObj
 # print("path is" + ','.join(sys.path))

platformio.ini

@@ -78,10 +78,10 @@ lib_deps =
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/DHT sensor library@^1.4.1
   adafruit/Adafruit Unified Sensor@^1.1.4
   paulstoffregen/OneWire@^2.3.5
   robtillaart/DS18B20@^0.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.3
   adafruit/Adafruit BME280 Library@^2.2.2
   adafruit/Adafruit BME680 Library@^2.0.1
   adafruit/Adafruit MCP9808 Library@^2.0.0
@@ -92,7 +92,7 @@ lib_deps =
 extends = arduino_base
 platform = espressif32@3.5.0
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<nrf52/>
+  ${arduino_base.build_src_filter} -<nrf52/> -<stm32wl>
 upload_speed = 115200
 debug_init_break = tbreak setup
 
@@ -144,7 +144,7 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable 
   -Isrc/nrf52
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/>
+  ${arduino_base.build_src_filter} -<esp32/> -<stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/>
 lib_ignore =
   BluetoothOTA
 

src/ButtonThread.h

@@ -7,7 +7,7 @@
 #include "power.h"
 #include <OneButton.h>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "nimble/BluetoothUtil.h"
 #endif
 
@@ -127,7 +127,7 @@ class ButtonThread : public concurrency::OSThread
     static void userButtonPressedLong()
     {
         // DEBUG_MSG("Long press!\n");
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
         screen->adjustBrightness();
 #endif
         // If user button is held down for 5 seconds, shutdown the device.
@@ -137,15 +137,22 @@ class ButtonThread : public concurrency::OSThread
                 setLed(false);
                 power->shutdown();
             }
-#elif NRF52_SERIES
+#elif defined(ARCH_NRF52)
             // Do actual shutdown when button released, otherwise the button release
             // may wake the board immediatedly.
             if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
                 screen->startShutdownScreen();
                 DEBUG_MSG("Shutdown from long press");
                 playBeep();
+#ifdef PIN_LED1
                 ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
                 ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+                ledOff(PIN_LED3);
+#endif
                 shutdown_on_long_stop = true;
             }
 #endif
@@ -156,19 +163,19 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         disablePin();
-#elif defined(HAS_EINK)
+#elif defined(USE_EINK)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
     }
 
     static void userButtonMultiPressed()
     {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         clearNVS();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
         clearBonds();
 #endif
     }

src/DebugConfiguration.h

@@ -17,29 +17,6 @@
 
 #define DEBUG_PORT (*console) // Serial debug port
 
-// What platforms should use SEGGER?
-#ifdef NRF52_SERIES
-
-// Always include the SEGGER code on NRF52 - because useful for debugging
-#include "SEGGER_RTT.h"
-
-// The channel we send stdout data to
-#define SEGGER_STDOUT_CH 0
-
-// Debug printing to segger console
-#define SEGGER_MSG(...) SEGGER_RTT_printf(SEGGER_STDOUT_CH, __VA_ARGS__)
-
-// If we are not on a NRF52840 (which has built in USB-ACM serial support) and we don't have serial pins hooked up, then we MUST
-// use SEGGER for debug output
-#if !defined(PIN_SERIAL_RX) && !defined(NRF52840_XXAA)
-// No serial ports on this board - ONLY use segger in memory console
-#define USE_SEGGER
-#endif
-
-#else
-#define SERIAL0_RX_GPIO 3 // Always GPIO3 on ESP32
-#endif
-
 #ifdef USE_SEGGER
 #define DEBUG_MSG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else

src/FSCommon.cpp

@@ -1,6 +1,46 @@
 #include "configuration.h"
 #include "FSCommon.h"
 
+
+bool copyFile(const char* from, const char* to)
+{
+#ifdef FSCom
+    unsigned char cbuffer[16];
+   
+    File f1 = FSCom.open(from, FILE_O_READ);
+    if (!f1){
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+
+    File f2 = FSCom.open(to, FILE_O_WRITE);
+    if (!f2) {
+        DEBUG_MSG("Failed to open file");
+        return false;
+    }
+   
+    while (f1.available() > 0) {
+        byte i = f1.read(cbuffer, 16);
+        f2.write(cbuffer, i);
+    }
+   
+    f2.close();
+    f1.close();
+    return true;
+#endif
+}
+
+bool renameFile(const char* pathFrom, const char* pathTo)
+{
+#ifdef FSCom
+    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom) ) {
+        return true;
+    } else{
+        return false;
+    }
+#endif
+}
+
 void listDir(const char * dirname, uint8_t levels)
 {
 #ifdef FSCom

src/FSCommon.h

@@ -4,21 +4,25 @@
 
 // Cross platform filesystem API
 
-#ifdef PORTDUINO
+#if defined(ARCH_PORTDUINO)
 // Portduino version
 #include "PortduinoFS.h"
 #define FSCom PortduinoFS
 #define FSBegin() true
 #define FILE_O_WRITE "w"
 #define FILE_O_READ "r"
-#elif !defined(NO_ESP32)
+#endif
+
+#if defined(ARCH_ESP32)
 // ESP32 version
 #include "LITTLEFS.h"
 #define FSCom LITTLEFS
 #define FSBegin() FSCom.begin(true)
 #define FILE_O_WRITE "w"
 #define FILE_O_READ "r"
-#else
+#endif
+
+#if defined(ARCH_NRF52)
 // NRF52 version
 #include "InternalFileSystem.h"
 #define FSCom InternalFS
@@ -27,5 +31,6 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
+bool renameFile(const char* pathFrom, const char* pathTo);
 void listDir(const char * dirname, uint8_t levels);
 void rmDir(const char * dirname);

src/OSTimer.cpp

@@ -15,7 +15,7 @@ bool scheduleOSCallback(PendableFunction callback, void *param1, uint32_t param2
     return xTimerPendFunctionCall(callback, param1, param2, pdMS_TO_TICKS(delayMsec));
 } */
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
 // Super skanky quick hack to use hardware timers of the ESP32
 static hw_timer_t *timer;

src/Power.cpp

@@ -46,7 +46,7 @@ Power *power;
 using namespace meshtastic;
 
 #ifndef AREF_VOLTAGE
-#if defined(NRF52_SERIES)
+#if defined(ARCH_NRF52)
 /*
  * Internal Reference is +/-0.6V, with an adjustable gain of 1/6, 1/5, 1/4,
  * 1/3, 1/2 or 1, meaning 3.6, 3.0, 2.4, 1.8, 1.2 or 0.6V for the ADC levels.
@@ -84,7 +84,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (v < noBatVolt)
             return -1; // If voltage is super low assume no battery installed
 
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
         // This does not work on a RAK4631 with battery connected
         if (v > chargingVolt)
             return 0; // While charging we can't report % full on the battery
@@ -112,7 +112,18 @@ class AnalogBatteryLevel : public HasBatteryLevel
         const uint32_t min_read_interval = 5000;
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
+
+#ifdef BATTERY_SENSE_SAMPLES
+//Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic environment.
+            uint32_t raw = 0;
+            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES;i++){
+                raw += analogRead(BATTERY_PIN);
+            }
+            raw = raw/BATTERY_SENSE_SAMPLES;
+#else
             uint32_t raw = analogRead(BATTERY_PIN);
+#endif
+
             float scaled;
 #ifndef VBAT_RAW_TO_SCALED
             scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
@@ -169,11 +180,11 @@ bool Power::analogInit()
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // ESP32 needs special analog stuff
     adcAttachPin(BATTERY_PIN);
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
@@ -214,7 +225,7 @@ void Power::shutdown()
     DEBUG_MSG("Shutting down\n");
     axp.setChgLEDMode(AXP20X_LED_OFF);
     axp.shutdown();
-#elif NRF52_SERIES
+#elif defined(ARCH_NRF52)
     playBeep();
     ledOff(PIN_LED1);
     ledOff(PIN_LED2);
@@ -256,7 +267,7 @@ void Power::readPowerStatus()
 
 // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
 // Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;

src/PowerFSM.cpp

@@ -63,7 +63,7 @@ static void lsIdle()
 {
     // DEBUG_MSG("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     // Do we have more sleeping to do?
     if (secsSlept < config.power.ls_secs ? config.power.ls_secs : default_ls_secs * 1000) {
@@ -343,7 +343,7 @@ void PowerFSM_setup()
 
     uint32_t meshSds = 0;
 
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
     // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
     // See: https://github.com/meshtastic/Meshtastic-device/issues/1071

src/SerialConsole.cpp

@@ -30,7 +30,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port)
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {

src/configuration.h

@@ -62,79 +62,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
 #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
 
-#ifdef PORTDUINO
-
-#define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth)
-
-#elif defined(NRF52_SERIES) // All of the NRF52 targets are configured using variant.h, so this section shouldn't need to be
-// board specific
-
-//
-// Standard definitions for NRF52 targets
-//
-
-#define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth)
-
-// We bind to the GPS using variant.h instead for this platform (Serial1)
-
-#define LED_PIN PIN_LED1 // LED1 on nrf52840-DK
-
-// If the variant filed defines as standard button
-#ifdef PIN_BUTTON1
-#define BUTTON_PIN PIN_BUTTON1
+// Nop definition for these attributes that are specific to ESP32
+#ifndef EXT_RAM_ATTR
+    #define EXT_RAM_ATTR
 #endif
-
-#ifdef PIN_BUTTON2
-#define BUTTON_PIN_ALT PIN_BUTTON2
+#ifndef IRAM_ATTR
+    #define IRAM_ATTR
 #endif
-
-#ifdef PIN_BUTTON_TOUCH
-#define BUTTON_PIN_TOUCH PIN_BUTTON_TOUCH
-#endif
-
-#else
-
-//
-// Standard definitions for ESP32 targets
-//
-
-#define HAS_WIFI
-
-#define GPS_SERIAL_NUM 1
-#define GPS_RX_PIN 34
-#ifdef USE_JTAG
-#define GPS_TX_PIN -1
-#else
-#define GPS_TX_PIN 12
-#endif
-
-// -----------------------------------------------------------------------------
-// LoRa SPI
-// -----------------------------------------------------------------------------
-
-// NRF52 boards will define this in variant.h
-#ifndef RF95_SCK
-#define RF95_SCK 5
-#define RF95_MISO 19
-#define RF95_MOSI 27
-#define RF95_NSS 18
-#endif
-
-#endif
-
-#ifndef TTGO_T_ECHO
-#define GPS_UBLOX
-#endif
-
-//
-// Standard definitions for !ESP32 targets
-//
-
-#ifdef NO_ESP32
-// Nop definition for these attributes - not used on NRF52
-#define EXT_RAM_ATTR
-#define IRAM_ATTR
-#define RTC_DATA_ATTR
+#ifndef RTC_DATA_ATTR
+    #define RTC_DATA_ATTR
 #endif
 
 // -----------------------------------------------------------------------------
@@ -190,109 +126,43 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_THREAD_INTERVAL 100
 #endif
 
-#if defined(TBEAM_V10)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TBEAM
-
-#elif defined(TBEAM_V07)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TBEAM0p7
-
-#elif defined(DIY_V1)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_DIY_V1
-
-#elif defined(RAK_11200)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_RAK11200
-
-#elif defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
-
-#ifdef HELTEC_V2_0
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_HELTEC_V2_0
-
-#endif
-
-#ifdef HELTEC_V2_1
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_HELTEC_V2_1
-
-#endif
-
-#elif defined(ARDUINO_HELTEC_WIFI_LORA_32)
-
-#define HW_VENDOR HardwareModel_HELTEC_V1
-
-#elif defined(TLORA_V1)
-
-#define HW_VENDOR HardwareModel_TLORA_V1
-
-#elif defined(TLORA_V2)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V2
-
-#elif defined(TLORA_V1_3)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V1_1p3
-
-#elif defined(TLORA_V2_1_16)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V2_1_1p6
-
-#elif defined(GENIEBLOCKS)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_GENIEBLOCKS
-
-#elif defined(PRIVATE_HW)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_PRIVATE_HW
-
-#endif
-
-#ifdef ARDUINO_NRF52840_PCA10056
-
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_NRF52840DK
-
-// This board uses 0 to be mean LED on
-#undef LED_INVERTED
-#define LED_INVERTED 1
-
-#elif defined(ARDUINO_NRF52840_PPR)
-
-#define HW_VENDOR HardwareModel_PPR
-
-#elif defined(RAK4630)
-
-#define HW_VENDOR HardwareModel_RAK4631
-
-#elif defined(TTGO_T_ECHO)
-
-#define HW_VENDOR HardwareModel_T_ECHO
-
-#elif defined(NANO_G1)
-
-#define HW_VENDOR HardwareModel_NANO_G1
-
-#elif defined(NORDIC_PCA10059)
-
-#define HW_VENDOR HardwareModel_NRF52840_PCA10059
-
-#elif defined(M5STACK)
-
-#define HW_VENDOR HardwareModel_M5STACK
-
-#elif NRF52_SERIES
-
-#define HW_VENDOR HardwareModel_NRF52_UNKNOWN
-
-#elif PORTDUINO
-
-#define HW_VENDOR HardwareModel_PORTDUINO
-
-#endif
-
+/* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
+
+/* Step #2: follow with defines common to the architecture; 
+   also enable HAS_ option not specifically disabled by variant.h */
+#include "architecture.h"
+
+/* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
+
+#ifndef HAS_WIFI
+    #define HAS_WIFI 0
+#endif
+#ifndef HAS_SCREEN
+    #define HAS_SCREEN 0
+#endif
+#ifndef HAS_WIRE
+    #define HAS_WIRE 0
+#endif
+#ifndef HAS_GPS
+    #define HAS_GPS 0
+#endif
+#ifndef HAS_BUTTON
+    #define HAS_BUTTON 0
+#endif
+#ifndef HAS_TELEMETRY
+    #define HAS_TELEMETRY 0
+#endif
+#ifndef HAS_RADIO
+    #define HAS_RADIO 0
+#endif
+#ifndef HAS_RTC
+    #define HAS_RTC 0
+#endif
+
 #include "RF95Configuration.h"
 #include "DebugConfiguration.h"
+
+#ifndef HW_VENDOR
+    #error HW_VENDOR must be defined
+#endif

src/debug/i2cScan.h

@@ -3,7 +3,7 @@
 #include <Wire.h>
 #include "mesh/generated/telemetry.pb.h"
 
-#ifndef NO_WIRE
+#if HAS_WIRE
 uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length) {
     uint16_t value = 0x00;
     Wire.beginTransmission(address);
@@ -124,6 +124,9 @@ void scanI2Cdevice(void)
             } else if (registerValue == 0x60) {
                 DEBUG_MSG("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
                 nodeTelemetrySensorsMap[TelemetrySensorType_BME280] = addr;
+            } else {
+                DEBUG_MSG("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
+                nodeTelemetrySensorsMap[TelemetrySensorType_BMP280] = addr;
             }
         }
         if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {

src/esp32/architecture.h

@@ -0,0 +1,105 @@
+#pragma once
+
+#define ARCH_ESP32
+
+//
+// defaults for ESP32 architecture
+//
+
+#ifndef HAS_WIFI
+    #define HAS_WIFI 1
+#endif
+#ifndef HAS_SCREEN
+    #define HAS_SCREEN 1
+#endif
+#ifndef HAS_WIRE
+    #define HAS_WIRE 1
+#endif
+#ifndef HAS_GPS
+    #define HAS_GPS 1
+#endif
+#ifndef HAS_BUTTON
+    #define HAS_BUTTON 1
+#endif
+#ifndef HAS_TELEMETRY
+    #define HAS_TELEMETRY 1
+#endif
+#ifndef HAS_RADIO
+    #define HAS_RADIO 1
+#endif
+#ifndef HAS_RTC
+    #define HAS_RTC 1
+#endif
+
+//
+// set HW_VENDOR
+//
+
+// This string must exactly match the case used in release file names or the android updater won't work
+
+#if defined(TBEAM_V10)
+    #define HW_VENDOR HardwareModel_TBEAM
+#elif defined(TBEAM_V07)
+    #define HW_VENDOR HardwareModel_TBEAM0p7
+#elif defined(DIY_V1)
+    #define HW_VENDOR HardwareModel_DIY_V1
+#elif defined(RAK_11200)
+    #define HW_VENDOR HardwareModel_RAK11200
+#elif defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
+    #ifdef HELTEC_V2_0
+        #define HW_VENDOR HardwareModel_HELTEC_V2_0
+    #endif
+    #ifdef HELTEC_V2_1
+        #define HW_VENDOR HardwareModel_HELTEC_V2_1
+    #endif
+#elif defined(ARDUINO_HELTEC_WIFI_LORA_32)
+    #define HW_VENDOR HardwareModel_HELTEC_V1
+#elif defined(TLORA_V1)
+    #define HW_VENDOR HardwareModel_TLORA_V1
+#elif defined(TLORA_V2)
+    #define HW_VENDOR HardwareModel_TLORA_V2
+#elif defined(TLORA_V1_3)
+    #define HW_VENDOR HardwareModel_TLORA_V1_1p3
+#elif defined(TLORA_V2_1_16)
+    #define HW_VENDOR HardwareModel_TLORA_V2_1_1p6
+#elif defined(GENIEBLOCKS)
+    #define HW_VENDOR HardwareModel_GENIEBLOCKS
+#elif defined(PRIVATE_HW)
+    #define HW_VENDOR HardwareModel_PRIVATE_HW
+#elif defined(NANO_G1)
+    #define HW_VENDOR HardwareModel_NANO_G1
+#elif defined(M5STACK)
+    #define HW_VENDOR HardwareModel_M5STACK
+#elif defined(STATION_G1)
+    #define HW_VENDOR HardwareModel_STATION_G1
+#endif
+
+//
+// Standard definitions for ESP32 targets
+//
+
+#define GPS_SERIAL_NUM 1
+#ifndef GPS_RX_PIN
+#define GPS_RX_PIN 34
+#endif
+#ifndef GPS_TX_PIN
+#ifdef USE_JTAG
+#define GPS_TX_PIN -1
+#else
+#define GPS_TX_PIN 12
+#endif
+#endif
+
+// -----------------------------------------------------------------------------
+// LoRa SPI
+// -----------------------------------------------------------------------------
+
+// NRF52 boards will define this in variant.h
+#ifndef RF95_SCK
+#define RF95_SCK 5
+#define RF95_MISO 19
+#define RF95_MOSI 27
+#define RF95_NSS 18
+#endif
+
+#define SERIAL0_RX_GPIO 3 // Always GPIO3 on ESP32

src/gps/GPS.cpp

@@ -65,12 +65,12 @@ bool GPS::setupGPS()
         didSerialInit = true;
 
 // ESP32 has a special set of parameters vs other arduino ports
-#if defined(GPS_RX_PIN) && !defined(NO_ESP32)
+#if defined(GPS_RX_PIN) && defined(ARCH_ESP32)
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         _serial_gps->setRxBufferSize(2048); // the default is 256
 #endif
 #ifdef TTGO_T_ECHO
@@ -330,7 +330,7 @@ int32_t GPS::runOnce()
         if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
             DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
             devicestate.did_gps_reset = false;
-            nodeDB.saveToDisk();
+            nodeDB.saveDeviceStateToDisk();
         }
 #endif
     }
@@ -432,14 +432,14 @@ int GPS::prepareDeepSleep(void *unused)
     return 0;
 }
 
-#ifndef NO_GPS
+#if HAS_GPS
 #include "NMEAGPS.h"
 #endif
 
 GPS *createGps()
 {
 
-#ifdef NO_GPS
+#if !HAS_GPS
     return nullptr;
 #else
     if (!config.position.gps_disabled) {

src/gps/RTC.cpp

@@ -115,12 +115,12 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_hour, t->tm_min, t->tm_sec);
             DEBUG_MSG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
         }
-#elif !defined(NO_ESP32)
+#elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
 #endif
 
         // nrf52 doesn't have a readable RTC (yet - software not written)
-#if defined(PORTDUINO) || !defined(NO_ESP32) || defined(RV3028_RTC) || defined(PCF8563_RTC)
+#ifdef HAS_RTC
         readFromRTC();
 #endif
 

src/graphics/EInkDisplay2.cpp

@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#ifdef HAS_EINK
+#ifdef USE_EINK
 #include "main.h"
 #include "EInkDisplay2.h"
 #include "SPILock.h"

src/graphics/Screen.cpp

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
 #include "configuration.h"
-#ifndef NO_SCREEN
+#if HAS_SCREEN
 #include <OLEDDisplay.h>
 
 #include "GPS.h"
@@ -39,7 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "target_specific.h"
 #include "utils.h"
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #include "mesh/http/WiFiAPClient.h"
 #endif
@@ -64,6 +64,11 @@ namespace graphics
 static FrameCallback normalFrames[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 static uint32_t targetFramerate = IDLE_FRAMERATE;
 static char btPIN[16] = "888888";
+    
+// This defines the layout of the compass.
+// If true, North with remain static at the top of the compass.
+// If false, your current heading is static at the top of the compass.
+bool compassNorthTop = false;
 
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
@@ -94,7 +99,7 @@ static uint16_t displayWidth, displayHeight;
 #define SCREEN_WIDTH displayWidth
 #define SCREEN_HEIGHT displayHeight
 
-#if defined(HAS_EINK) || defined(ILI9341_DRIVER)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16
 #define FONT_MEDIUM ArialMT_Plain_24
@@ -212,7 +217,7 @@ static void drawSSLScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     display->setFont(FONT_SMALL);
     display->drawString(64 + x, y, "Creating SSL certificate");
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     yield();
     esp_task_wdt_reset();
 #endif
@@ -253,13 +258,13 @@ static void drawWelcomeScreen(OLEDDisplay *display, OLEDDisplayUiState *state, i
         display->drawString(x, y + FONT_HEIGHT_SMALL * 4 - 3, "");
     }
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     yield();
     esp_task_wdt_reset();
 #endif
 }
 
-#ifdef HAS_EINK
+#ifdef USE_EINK
 /// Used on eink displays while in deep sleep
 static void drawSleepScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -595,7 +600,7 @@ class Point
     void rotate(float radian)
     {
         float cos = cosf(radian), sin = sinf(radian);
-        float rx = x * cos - y * sin, ry = x * sin + y * cos;
+        float rx = x * cos + y * sin, ry = -x * sin + y * cos;
 
         x = rx;
         y = ry;
@@ -609,8 +614,10 @@ class Point
 
     void scale(float f)
     {
+        //We use -f here to counter the flip that happens
+        //on the y axis when drawing and rotating on screen
         x *= f;
-        y *= f;
+        y *= -f;
     }
 };
 
@@ -682,16 +689,21 @@ static void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t comp
     drawLine(display, rightArrow, tip);
 }
 
-// Draw the compass heading
-static void drawCompassHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
+// Draw north
+static void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
 {
-    Point N1(-0.04f, -0.65f), N2(0.04f, -0.65f);
-    Point N3(-0.04f, -0.55f), N4(0.04f, -0.55f);
+    //If north is supposed to be at the top of the compass we want rotation to be +0
+    if(compassNorthTop)
+        myHeading = -0;
+    
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
     Point *rosePoints[] = {&N1, &N2, &N3, &N4};
 
     for (int i = 0; i < 4; i++) {
-        rosePoints[i]->rotate(myHeading);
-        rosePoints[i]->scale(-1 * COMPASS_DIAM);
+        // North on compass will be negative of heading
+        rosePoints[i]->rotate(-myHeading);
+        rosePoints[i]->scale(COMPASS_DIAM);
         rosePoints[i]->translate(compassX, compassY);
     }
     drawLine(display, N1, N3);
@@ -762,7 +774,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     if (ourNode && hasPosition(ourNode)) {
         Position &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
-        drawCompassHeading(display, compassX, compassY, myHeading);
+        drawCompassNorth(display, compassX, compassY, myHeading);
 
         if (hasPosition(node)) {
             // display direction toward node
@@ -775,12 +787,13 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
             else
                 snprintf(distStr, sizeof(distStr), "%.1f km", d / 1000);
 
-            // FIXME, also keep the guess at the operators heading and add/substract
-            // it.  currently we don't do this and instead draw north up only.
             float bearingToOther =
-                GeoCoord::bearing(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
-            float headingRadian = bearingToOther - myHeading;
-            drawNodeHeading(display, compassX, compassY, headingRadian);
+                GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            // If the top of the compass is a static north then bearingToOther can be drawn on the compass directly
+            // If the top of the compass is not a static north we need adjust bearingToOther based on heading
+            if(!compassNorthTop)
+                bearingToOther -= myHeading;
+            drawNodeHeading(display, compassX, compassY, bearingToOther);
         }
     }
     if (!hasNodeHeading)
@@ -843,7 +856,7 @@ Screen::Screen(uint8_t address, int sda, int scl) : OSThread("Screen"), cmdQueue
  */
 void Screen::doDeepSleep()
 {
-#ifdef HAS_EINK
+#ifdef USE_EINK
     static FrameCallback sleepFrames[] = {drawSleepScreen};
     static const int sleepFrameCount = sizeof(sleepFrames) / sizeof(sleepFrames[0]);
     ui.setFrames(sleepFrames, sleepFrameCount);
@@ -935,9 +948,11 @@ void Screen::setup()
     handleSetOn(true);
 
     // On some ssd1306 clones, the first draw command is discarded, so draw it
-    // twice initially.
+    // twice initially. Skip this for EINK Displays to save a few seconds during boot
     ui.update();
+#ifndef USE_EINK
     ui.update();
+#endif
     serialSinceMsec = millis();
 
     // Subscribe to status updates
@@ -954,7 +969,7 @@ void Screen::setup()
 void Screen::forceDisplay()
 {
     // Nasty hack to force epaper updates for 'key' frames.  FIXME, cleanup.
-#ifdef HAS_EINK
+#ifdef USE_EINK
     dispdev.forceDisplay();
 #endif
 }
@@ -1055,7 +1070,7 @@ int32_t Screen::runOnce()
         DEBUG_MSG("Setting idle framerate\n");
         targetFramerate = IDLE_FRAMERATE;
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         setCPUFast(false); // Turn up the CPU to improve screen animations
 #endif
 
@@ -1180,7 +1195,7 @@ void Screen::setFrames()
     // call a method on debugInfoScreen object (for more details)
     normalFrames[numframes++] = &Screen::drawDebugInfoSettingsTrampoline;
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     if (isWifiAvailable()) {
         // call a method on debugInfoScreen object (for more details)
         normalFrames[numframes++] = &Screen::drawDebugInfoWiFiTrampoline;
@@ -1287,7 +1302,7 @@ void Screen::setFastFramerate()
     // We are about to start a transition so speed up fps
     targetFramerate = SCREEN_TRANSITION_FRAMERATE;
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     setCPUFast(true); // Turn up the CPU to improve screen animations
 #endif
 
@@ -1342,7 +1357,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 // Jm
 void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-#ifdef HAS_WIFI
+#if HAS_WIFI
     const char *wifiName = config.wifi.ssid;
     const char *wifiPsw = config.wifi.psk;
 
@@ -1665,4 +1680,5 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 }
 
 } // namespace graphics
-#endif // NO_SCREEN
+
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -1,6 +1,8 @@
 #pragma once
 
-#ifdef NO_SCREEN
+#include "configuration.h"
+
+#if !HAS_SCREEN
 #include "power.h"
 namespace graphics
 {
@@ -315,7 +317,7 @@ class Screen : public concurrency::OSThread
     SSD1306Wire dispdev;
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
     TFTDisplay dispdev;
-#elif defined(HAS_EINK)
+#elif defined(USE_EINK)
     EInkDisplay dispdev;
 #elif defined(USE_ST7567)
     ST7567Wire dispdev;

src/main.cpp

@@ -31,7 +31,7 @@
 
 #include "mesh/http/WiFiAPClient.h"
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "mesh/http/WebServer.h"
 
 #ifdef USE_NEW_ESP32_BLUETOOTH
@@ -42,7 +42,7 @@
 
 #endif
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
 #include "mesh/wifi/WiFiServerAPI.h"
 #include "mqtt/MQTT.h"
 #endif
@@ -52,7 +52,9 @@
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
 
+#if HAS_BUTTON
 #include "ButtonThread.h"
+#endif
 #include "PowerFSMThread.h"
 
 using namespace concurrency;
@@ -91,7 +93,7 @@ uint32_t serialSinceMsec;
 bool axp192_found;
 
 // Array map of sensor types (as array index) and i2c address as value we'll find in the i2c scan
-uint8_t nodeTelemetrySensorsMap[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+uint8_t nodeTelemetrySensorsMap[7] = { 0, 0, 0, 0, 0, 0, 0 };
 
 Router *router = NULL; // Users of router don't care what sort of subclass implements that API
 
@@ -126,11 +128,15 @@ static int32_t ledBlinker()
 
 uint32_t timeLastPowered = 0;
 
+#if HAS_BUTTON
 bool ButtonThread::shutdown_on_long_stop = false;
+#endif
 
 static Periodic *ledPeriodic;
 static OSThread *powerFSMthread, *buttonThread;
+#if HAS_BUTTON
 uint32_t ButtonThread::longPressTime = 0;
+#endif
 
 RadioInterface *rIf = NULL;
 
@@ -187,7 +193,7 @@ void setup()
     bool forceSoftAP = 0;
 
 #ifdef BUTTON_PIN
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     // If the button is connected to GPIO 12, don't enable the ability to use
     // meshtasticAdmin on the device.
@@ -218,7 +224,7 @@ void setup()
 
 #ifdef I2C_SDA
     Wire.begin(I2C_SDA, I2C_SCL);
-#elif !defined(NO_WIRE)
+#elif HAS_WIRE
     Wire.begin();
 #endif
 
@@ -236,8 +242,10 @@ void setup()
     // scanEInkDevice();
 #endif
 
+#if HAS_BUTTON
     // Buttons & LED
     buttonThread = new ButtonThread();
+#endif
 
 #ifdef LED_PIN
     pinMode(LED_PIN, OUTPUT);
@@ -247,7 +255,7 @@ void setup()
     // Hello
     DEBUG_MSG("Meshtastic hwvendor=%d, swver=%s\n", HW_VENDOR, optstr(APP_VERSION));
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // Don't init display if we don't have one or we are waking headless due to a timer event
     if (wakeCause == ESP_SLEEP_WAKEUP_TIMER)
         screen_found = 0; // forget we even have the hardware
@@ -255,7 +263,7 @@ void setup()
     esp32Setup();
 #endif
 
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     nrf52Setup();
 #endif
     playStartMelody();
@@ -271,7 +279,7 @@ void setup()
 
     // Init our SPI controller (must be before screen and lora)
     initSPI();
-#ifdef NO_ESP32
+#ifndef ARCH_ESP32
     SPI.begin();
 #else
     // ESP32
@@ -306,7 +314,7 @@ void setup()
 
         // Don't call screen setup until after nodedb is setup (because we need
         // the current region name)
-#if defined(ST7735_CS) || defined(HAS_EINK) || defined(ILI9341_DRIVER)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
     screen->setup();
 #else
     if (screen_found)
@@ -386,7 +394,7 @@ void setup()
     }
 #endif
 
-#ifdef USE_SIM_RADIO
+#if !HAS_RADIO
     if (!rIf) {
         rIf = new SimRadio;
         if (!rIf->init()) {
@@ -399,19 +407,19 @@ void setup()
     }
 #endif
 
-#if defined(PORTDUINO) || defined(HAS_WIFI)
+#if HAS_WIFI
     mqttInit();
 #endif
 
     // Initialize Wifi
     initWifi(forceSoftAP);
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // Start web server thread.
     webServerThread = new WebServerThread();
 #endif
 
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     initApiServer();
 #endif
 
@@ -452,10 +460,10 @@ void loop()
 
     // heap_caps_check_integrity_all(true); // FIXME - disable this expensive check
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     esp32Loop();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     nrf52Loop();
 #endif
     powerCommandsCheck();

src/main.h

@@ -19,7 +19,7 @@ extern bool axp192_found;
 extern bool isCharging;
 extern bool isUSBPowered;
 
-extern uint8_t nodeTelemetrySensorsMap[12];
+extern uint8_t nodeTelemetrySensorsMap[7];
 
 // Global Screen singleton.
 extern graphics::Screen *screen;

src/mesh/FloodingRouter.cpp

@@ -29,8 +29,12 @@ bool FloodingRouter::shouldFilterReceived(MeshPacket *p)
 
 void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
-
-    if ((p->to == NODENUM_BROADCAST) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
+    PacketId ackId = ((c && c->error_reason == Routing_Error_NONE) || !c) ? p->decoded.request_id : 0;
+    if (ackId && p->to != getNodeNum()) {
+        // do not flood direct message that is ACKed 
+        DEBUG_MSG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
+        Router::cancelSending(p->to, p->decoded.request_id);   // cancel rebroadcast for this DM
+    } else if ((p->to != getNodeNum()) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
         if (p->id != 0) {
             if (config.device.role != Config_DeviceConfig_Role_ClientMute) {
                 MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it

src/mesh/MeshModule.h

@@ -4,7 +4,7 @@
 #include "mesh/MeshTypes.h"
 #include <vector>
 
-#ifndef NO_SCREEN
+#if HAS_SCREEN
 #include <OLEDDisplay.h>
 #include <OLEDDisplayUi.h>
 #endif
@@ -72,7 +72,7 @@ class MeshModule
     static void observeUIEvents(Observer<const UIFrameEvent *> *observer);
     static AdminMessageHandleResult handleAdminMessageForAllPlugins(
         const MeshPacket &mp, AdminMessage *request, AdminMessage *response);
-#ifndef NO_SCREEN
+#if HAS_SCREEN
     virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) { return; }
 #endif
   protected:

src/mesh/NodeDB.cpp

@@ -17,14 +17,14 @@
 #include <pb_decode.h>
 #include <pb_encode.h>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "mesh/http/WiFiAPClient.h"
 #include "modules/esp32/StoreForwardModule.h"
 #include <Preferences.h>
 #include <nvs_flash.h>
 #endif
 
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
 #include <bluefruit.h>
 #include <utility/bonding.h>
 #endif
@@ -132,11 +132,11 @@ bool NodeDB::factoryReset()
     installDefaultDeviceState();
     // third, write to disk
     saveToDisk();
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // This will erase what's in NVS including ssl keys, persistant variables and ble pairing
     nvs_flash_erase();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     Bluefruit.begin();
     DEBUG_MSG("Clearing bluetooth bonds!\n");
     bond_print_list(BLE_GAP_ROLE_PERIPH);
@@ -248,7 +248,7 @@ void NodeDB::init()
 
     strncpy(myNodeInfo.firmware_version, optstr(APP_VERSION), sizeof(myNodeInfo.firmware_version));
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     Preferences preferences;
     preferences.begin("meshtastic", false);
     myNodeInfo.reboot_count = preferences.getUInt("rebootCounter", 0);
@@ -339,11 +339,11 @@ void NodeDB::loadFromDisk()
         if (devicestate.version < DEVICESTATE_MIN_VER) {
             DEBUG_MSG("Warn: devicestate %d is old, discarding\n", devicestate.version);
             installDefaultDeviceState();
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
             // This will erase what's in NVS including ssl keys, persistant variables and ble pairing
             nvs_flash_erase();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
             Bluefruit.begin();
             DEBUG_MSG("Clearing bluetooth bonds!\n");
             bond_print_list(BLE_GAP_ROLE_PERIPH);
@@ -414,7 +414,7 @@ bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_
         // brief window of risk here ;-)
         if (FSCom.exists(filename) && !FSCom.remove(filename))
             DEBUG_MSG("Warning: Can't remove old pref file\n");
-        if (!FSCom.rename(filenameTmp.c_str(), filename))
+        if (!renameFile(filenameTmp.c_str(), filename))
             DEBUG_MSG("Error: can't rename new pref file\n");
     } else {
         DEBUG_MSG("Can't write prefs\n");
@@ -435,6 +435,16 @@ void NodeDB::saveChannelsToDisk()
     }
 }
 
+void NodeDB::saveDeviceStateToDisk() 
+{
+    if (!devicestate.no_save) {
+#ifdef FSCom
+        FSCom.mkdir("/prefs");
+#endif
+        saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+    }
+}
+
 void NodeDB::saveToDisk()
 {
     if (!devicestate.no_save) {
@@ -669,7 +679,7 @@ void recordCriticalError(CriticalErrorCode code, uint32_t address, const char *f
     myNodeInfo.error_count++;
 
     // Currently portuino is mostly used for simulation.  Make sue the user notices something really bad happend
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     DEBUG_MSG("A critical failure occurred, portduino is exiting...");
     exit(2);
 #endif

src/mesh/NodeDB.h

@@ -44,7 +44,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(), saveChannelsToDisk();
+    void saveToDisk(), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or

src/mesh/RadioLibInterface.cpp

@@ -11,7 +11,7 @@
 // FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
 static SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
 
 void LockingModule::SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes)
 {
@@ -45,7 +45,7 @@ RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq
     instance = this;
 }
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 // ESP32 doesn't use that flag
 #define YIELD_FROM_ISR(x) portYIELD_FROM_ISR()
 #else
@@ -96,7 +96,7 @@ bool RadioLibInterface::canSendImmediately()
         if (busyTx && (millis() - lastTxStart > 60000)) {
             DEBUG_MSG("Hardware Failure! busyTx for more than 60s\n");
             RECORD_CRITICALERROR(CriticalErrorCode_TransmitFailed);
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
             if (busyTx && (millis() - lastTxStart > 65000)) // After 5s more, reboot
                 ESP.restart();
 #endif

src/mesh/RadioLibInterface.h

@@ -41,7 +41,7 @@ class LockingModule : public Module
     {
     }
     
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     void SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes) override;
 #else
     void SPIbeginTransaction() override;

src/mesh/ReliableRouter.cpp

@@ -16,7 +16,7 @@ ErrorCode ReliableRouter::send(MeshPacket *p)
         // If someone asks for acks on broadcast, we need the hop limit to be at least one, so that first node that receives our
         // message will rebroadcast.  But asking for hop_limit 0 in that context means the client app has no preference on hop
         // counts and we want this message to get through the whole mesh, so use the default.
-        if (p->to == NODENUM_BROADCAST && p->hop_limit == 0) {
+        if (p->hop_limit == 0) {
             if (config.lora.hop_limit && config.lora.hop_limit <= HOP_MAX) {
                 p->hop_limit = (config.lora.hop_limit >= HOP_MAX) ? HOP_MAX : config.lora.hop_limit;
             } else {
@@ -34,7 +34,7 @@ ErrorCode ReliableRouter::send(MeshPacket *p)
 bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
 {
     // Note: do not use getFrom() here, because we want to ignore messages sent from phone
-    if (p->to == NODENUM_BROADCAST && p->from == getNodeNum()) {
+    if (p->from == getNodeNum()) {
         printPacket("Rx someone rebroadcasting for us", p);
 
         // We are seeing someone rebroadcast one of our broadcast attempts.
@@ -231,4 +231,4 @@ void ReliableRouter::setNextTx(PendingPacket *pending)
     DEBUG_MSG("Setting next retransmission in %u msecs: ", d);
     printPacket("", pending->packet);
     setReceivedMessage(); // Run ASAP, so we can figure out our correct sleep time
-}
+}

src/mesh/Router.cpp

@@ -11,7 +11,7 @@ extern "C" {
 #include "mesh/compression/unishox2.h"
 }
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
 #include "mqtt/MQTT.h"
 #endif
 
@@ -213,7 +213,7 @@ ErrorCode Router::send(MeshPacket *p)
     if (p->which_payloadVariant == MeshPacket_decoded_tag) {
         ChannelIndex chIndex = p->channel; // keep as a local because we are about to change it
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
         // check if we should send decrypted packets to mqtt
 
         // truth table:
@@ -244,7 +244,7 @@ ErrorCode Router::send(MeshPacket *p)
             return encodeResult; // FIXME - this isn't a valid ErrorCode
         }
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
         // the packet is now encrypted.
         // check if we should send encrypted packets to mqtt
         if (mqtt && shouldActuallyEncrypt)

src/mesh/generated/localonly.pb.h

@@ -139,7 +139,7 @@ extern const pb_msgdesc_t LocalModuleConfig_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define LocalConfig_size                         319
-#define LocalModuleConfig_size                   288
+#define LocalModuleConfig_size                   268
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/mesh.pb.h

@@ -71,6 +71,8 @@ typedef enum _HardwareModel {
     HardwareModel_DR_DEV = 43, 
     /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
     HardwareModel_M5STACK = 44, 
+    /* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station */
+    HardwareModel_STATION_G1 = 45, 
     /* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. */
     HardwareModel_PRIVATE_HW = 255 
 } HardwareModel;

src/mesh/generated/module_config.pb.h

@@ -108,11 +108,7 @@ typedef struct _ModuleConfig_TelemetryConfig {
     uint32_t environment_update_interval;
     bool environment_measurement_enabled;
     bool environment_screen_enabled;
-    uint32_t environment_read_error_count_threshold;
-    uint32_t environment_recovery_interval;
     bool environment_display_fahrenheit;
-    TelemetrySensorType environment_sensor_type;
-    uint32_t environment_sensor_pin;
 } ModuleConfig_TelemetryConfig;
 
 /* Module Config */
@@ -162,7 +158,7 @@ extern "C" {
 #define ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0}
 #define ModuleConfig_StoreForwardConfig_init_default {0, 0, 0, 0, 0}
 #define ModuleConfig_RangeTestConfig_init_default {0, 0, 0}
-#define ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0, 0, 0, _TelemetrySensorType_MIN, 0}
+#define ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0}
 #define ModuleConfig_CannedMessageConfig_init_default {0, 0, 0, 0, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define ModuleConfig_init_zero                   {0, {ModuleConfig_MQTTConfig_init_zero}}
 #define ModuleConfig_MQTTConfig_init_zero        {0, "", "", "", 0}
@@ -170,7 +166,7 @@ extern "C" {
 #define ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0}
 #define ModuleConfig_StoreForwardConfig_init_zero {0, 0, 0, 0, 0}
 #define ModuleConfig_RangeTestConfig_init_zero   {0, 0, 0}
-#define ModuleConfig_TelemetryConfig_init_zero   {0, 0, 0, 0, 0, 0, 0, _TelemetrySensorType_MIN, 0}
+#define ModuleConfig_TelemetryConfig_init_zero   {0, 0, 0, 0, 0}
 #define ModuleConfig_CannedMessageConfig_init_zero {0, 0, 0, 0, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 
 /* Field tags (for use in manual encoding/decoding) */
@@ -215,11 +211,7 @@ extern "C" {
 #define ModuleConfig_TelemetryConfig_environment_update_interval_tag 2
 #define ModuleConfig_TelemetryConfig_environment_measurement_enabled_tag 3
 #define ModuleConfig_TelemetryConfig_environment_screen_enabled_tag 4
-#define ModuleConfig_TelemetryConfig_environment_read_error_count_threshold_tag 5
-#define ModuleConfig_TelemetryConfig_environment_recovery_interval_tag 6
 #define ModuleConfig_TelemetryConfig_environment_display_fahrenheit_tag 7
-#define ModuleConfig_TelemetryConfig_environment_sensor_type_tag 8
-#define ModuleConfig_TelemetryConfig_environment_sensor_pin_tag 9
 #define ModuleConfig_mqtt_tag                    1
 #define ModuleConfig_serial_tag                  2
 #define ModuleConfig_external_notification_tag   3
@@ -298,11 +290,7 @@ X(a, STATIC,   SINGULAR, UINT32,   device_update_interval,   1) \
 X(a, STATIC,   SINGULAR, UINT32,   environment_update_interval,   2) \
 X(a, STATIC,   SINGULAR, BOOL,     environment_measurement_enabled,   3) \
 X(a, STATIC,   SINGULAR, BOOL,     environment_screen_enabled,   4) \
-X(a, STATIC,   SINGULAR, UINT32,   environment_read_error_count_threshold,   5) \
-X(a, STATIC,   SINGULAR, UINT32,   environment_recovery_interval,   6) \
-X(a, STATIC,   SINGULAR, BOOL,     environment_display_fahrenheit,   7) \
-X(a, STATIC,   SINGULAR, UENUM,    environment_sensor_type,   8) \
-X(a, STATIC,   SINGULAR, UINT32,   environment_sensor_pin,   9)
+X(a, STATIC,   SINGULAR, BOOL,     environment_display_fahrenheit,   7)
 #define ModuleConfig_TelemetryConfig_CALLBACK NULL
 #define ModuleConfig_TelemetryConfig_DEFAULT NULL
 
@@ -347,7 +335,7 @@ extern const pb_msgdesc_t ModuleConfig_CannedMessageConfig_msg;
 #define ModuleConfig_RangeTestConfig_size        10
 #define ModuleConfig_SerialConfig_size           26
 #define ModuleConfig_StoreForwardConfig_size     22
-#define ModuleConfig_TelemetryConfig_size        38
+#define ModuleConfig_TelemetryConfig_size        18
 #define ModuleConfig_size                        105
 
 #ifdef __cplusplus

src/mesh/generated/telemetry.pb.h

@@ -14,28 +14,18 @@
 typedef enum _TelemetrySensorType { 
     /* No external telemetry sensor explicitly set */
     TelemetrySensorType_NotSet = 0, 
-    /* Moderate accuracy temperature */
-    TelemetrySensorType_DHT11 = 1, 
-    /* High accuracy temperature */
-    TelemetrySensorType_DS18B20 = 2, 
-    /* Moderate accuracy temperature and humidity */
-    TelemetrySensorType_DHT12 = 3, 
-    /* Moderate accuracy temperature and humidity */
-    TelemetrySensorType_DHT21 = 4, 
-    /* Moderate accuracy temperature and humidity */
-    TelemetrySensorType_DHT22 = 5, 
     /* High accuracy temperature, pressure, humidity */
-    TelemetrySensorType_BME280 = 6, 
+    TelemetrySensorType_BME280 = 1, 
     /* High accuracy temperature, pressure, humidity, and air resistance */
-    TelemetrySensorType_BME680 = 7, 
+    TelemetrySensorType_BME680 = 2, 
     /* Very high accuracy temperature */
-    TelemetrySensorType_MCP9808 = 8, 
-    /* Moderate accuracy temperature and humidity */
-    TelemetrySensorType_SHTC3 = 9, 
+    TelemetrySensorType_MCP9808 = 3, 
     /* Moderate accuracy current and voltage */
-    TelemetrySensorType_INA260 = 10, 
+    TelemetrySensorType_INA260 = 4, 
     /* Moderate accuracy current and voltage */
-    TelemetrySensorType_INA219 = 11 
+    TelemetrySensorType_INA219 = 5, 
+    /* High accuracy temperature and pressure */
+    TelemetrySensorType_BMP280 = 6 
 } TelemetrySensorType;
 
 /* Struct definitions */
@@ -87,8 +77,8 @@ typedef struct _Telemetry {
 
 /* Helper constants for enums */
 #define _TelemetrySensorType_MIN TelemetrySensorType_NotSet
-#define _TelemetrySensorType_MAX TelemetrySensorType_INA219
-#define _TelemetrySensorType_ARRAYSIZE ((TelemetrySensorType)(TelemetrySensorType_INA219+1))
+#define _TelemetrySensorType_MAX TelemetrySensorType_BMP280
+#define _TelemetrySensorType_ARRAYSIZE ((TelemetrySensorType)(TelemetrySensorType_BMP280+1))
 
 
 #ifdef __cplusplus

src/mesh/http/ContentHandler.cpp

@@ -14,7 +14,7 @@
 #include <HTTPURLEncodedBodyParser.hpp>
 #include <json11.hpp>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #endif
 
@@ -787,7 +787,7 @@ void handleBlinkLED(HTTPRequest *req, HTTPResponse *res)
             count = count - 1;
         }
     } else {
-#ifndef NO_SCREEN
+#if HAS_SCREEN
         screen->blink();
 #endif
     }

src/mesh/http/WebServer.cpp

@@ -11,7 +11,7 @@
 #include <WebServer.h>
 #include <WiFi.h>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #endif
 
@@ -152,7 +152,7 @@ void createSSLCert()
 
                     yield();
                     esp_task_wdt_reset();
-#ifndef NO_SCREEN
+#if HAS_SCREEN
                     if (millis() / 1000 >= 3) {
                         screen->setSSLFrames();
                     }

src/mesh/http/WiFiAPClient.h

@@ -4,7 +4,7 @@
 #include <Arduino.h>
 #include <functional>
 
-#ifdef HAS_WIFI
+#ifdef ARCH_ESP32
 #include <DNSServer.h>
 #include <WiFi.h>
 #endif

src/mesh/mesh-pb-constants.cpp

@@ -32,6 +32,7 @@ bool pb_decode_from_bytes(const uint8_t *srcbuf, size_t srcbufsize, const pb_msg
     }
 }
 
+#ifdef FSCom
 /// Read from an Arduino File
 bool readcb(pb_istream_t *stream, uint8_t *buf, size_t count)
 {
@@ -59,6 +60,7 @@ bool writecb(pb_ostream_t *stream, const uint8_t *buf, size_t count)
     // DEBUG_MSG("writing %d bytes to protobuf file\n", count);
     return file->write(buf, count) == count;
 }
+#endif
 
 bool is_in_helper(uint32_t n, const uint32_t *array, pb_size_t count)
 {

src/modules/AdminModule.cpp

@@ -6,7 +6,7 @@
 #include "configuration.h"
 #include "main.h"
 
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
 #include "unistd.h"
 #endif
 
@@ -110,7 +110,7 @@ bool AdminModule::handleReceivedProtobuf(const MeshPacket &mp, AdminMessage *r)
         break;
     }
 
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     case AdminMessage_exit_simulator_tag:
         DEBUG_MSG("Exiting simulator\n");
         _exit(0);

src/modules/CannedMessageModule.cpp

@@ -1,5 +1,5 @@
 #include "configuration.h"
-#ifndef NO_SCREEN
+#if HAS_SCREEN
 #include "CannedMessageModule.h"
 #include "FSCommon.h"
 #include "MeshService.h"

src/modules/CannedMessageModule.h

@@ -1,6 +1,5 @@
 #pragma once
-#ifdef NO_SCREEN
-#else
+#if HAS_SCREEN
 #include "ProtobufModule.h"
 #include "input/InputBroker.h"
 

src/modules/ExternalNotificationModule.cpp

@@ -116,7 +116,7 @@ ExternalNotificationModule::ExternalNotificationModule()
     // restrict to the admin channel for rx
     boundChannel = Channels::gpioChannel;
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #ifdef EXT_NOTIFY_OUT
 
     /*
@@ -154,7 +154,7 @@ ExternalNotificationModule::ExternalNotificationModule()
 
 ProcessMessage ExternalNotificationModule::handleReceived(const MeshPacket &mp)
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #ifdef EXT_NOTIFY_OUT
 
     if (moduleConfig.external_notification.enabled) {

src/modules/Modules.cpp

@@ -14,10 +14,10 @@
 #include "modules/RoutingModule.h"
 #include "modules/TextMessageModule.h"
 #include "modules/Telemetry/DeviceTelemetry.h"
-#ifndef PORTDUINO
+#if HAS_TELEMETRY
 #include "modules/Telemetry/EnvironmentTelemetry.h"
 #endif
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "modules/esp32/RangeTestModule.h"
 #include "modules/esp32/SerialModule.h"
 #include "modules/esp32/StoreForwardModule.h"
@@ -28,7 +28,9 @@
  */
 void setupModules()
 {
+#if HAS_BUTTON
     inputBroker = new InputBroker();
+#endif
     adminModule = new AdminModule();
     nodeInfoModule = new NodeInfoModule();
     positionModule = new PositionModule();
@@ -39,6 +41,7 @@ void setupModules()
 
     new RemoteHardwareModule();
     new ReplyModule();
+#if HAS_BUTTON
     rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
     rotaryEncoderInterruptImpl1->init();
     upDownInterruptImpl1 = new UpDownInterruptImpl1();
@@ -47,14 +50,15 @@ void setupModules()
     cardKbI2cImpl->init();
     facesKbI2cImpl = new FacesKbI2cImpl();
     facesKbI2cImpl->init();
-#ifndef NO_SCREEN    
+#endif
+#if HAS_SCREEN
     cannedMessageModule = new CannedMessageModule();
 #endif
-#ifndef PORTDUINO
+#if HAS_TELEMETRY
     new DeviceTelemetryModule();
     new EnvironmentTelemetryModule();
 #endif
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // Only run on an esp32 based device.
 
     /*

src/modules/PositionModule.cpp

@@ -133,22 +133,22 @@ int32_t PositionModule::runOnce()
 
         // Only send packets if the channel is less than 40% utilized.
         if (airTime->channelUtilizationPercent() < 40) {
+            if (node->has_position && (node->position.latitude_i != 0 || node->position.longitude_i != 0)) {
+                lastGpsSend = now;
 
-            lastGpsSend = now;
+                lastGpsLatitude = node->position.latitude_i;
+                lastGpsLongitude = node->position.longitude_i;
 
-            lastGpsLatitude = node->position.latitude_i;
-            lastGpsLongitude = node->position.longitude_i;
+                // If we changed channels, ask everyone else for their latest info
+                bool requestReplies = currentGeneration != radioGeneration;
+                currentGeneration = radioGeneration;
 
-            // If we changed channels, ask everyone else for their latest info
-            bool requestReplies = currentGeneration != radioGeneration;
-            currentGeneration = radioGeneration;
-
-            DEBUG_MSG("Sending pos@%x:6 to mesh (wantReplies=%d)\n", node->position.pos_timestamp, requestReplies);
-
-            sendOurPosition(NODENUM_BROADCAST, requestReplies);
+                DEBUG_MSG("Sending pos@%x:6 to mesh (wantReplies=%d)\n", node->position.pos_timestamp, requestReplies);
 
+                sendOurPosition(NODENUM_BROADCAST, requestReplies);
+            }
         } else {
-            DEBUG_MSG("Channel utilization is >50 percent. Skipping this opportunity to send.\n");
+            DEBUG_MSG("Channel utilization is >40 percent. Skipping this opportunity to send.\n");
         }
 
     } else if (!config.position.position_broadcast_smart_disabled) {

src/modules/RoutingModule.cpp

@@ -44,4 +44,5 @@ void RoutingModule::sendAckNak(Routing_Error err, NodeNum to, PacketId idFrom, C
 RoutingModule::RoutingModule() : ProtobufModule("routing", PortNum_ROUTING_APP, Routing_fields)
 {
     isPromiscuous = true;
+    encryptedOk = true;
 }

src/modules/Telemetry/DeviceTelemetry.cpp

@@ -12,7 +12,7 @@
 
 int32_t DeviceTelemetryModule::runOnce()
 {
-#ifndef PORTDUINO
+#ifndef ARCH_PORTDUINO
     if (firstTime) {
         // This is the first time the OSThread library has called this function, so do some setup
         firstTime = 0;
@@ -72,7 +72,7 @@ bool DeviceTelemetryModule::sendOurTelemetry(NodeNum dest, bool wantReplies)
 
     lastMeasurementPacket = packetPool.allocCopy(*p);
     DEBUG_MSG("Device Telemetry: Sending packet to mesh\n");
-    service.sendToMesh(p);
+    service.sendToMesh(p, RX_SRC_LOCAL, true);
     nodeDB.updateTelemetry(nodeDB.getNodeNum(), t, RX_SRC_LOCAL);
     return true;
 }

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -11,19 +11,16 @@
 #include <OLEDDisplayUi.h>
 
 // Sensors
+#include "Sensor/BMP280Sensor.h"
 #include "Sensor/BME280Sensor.h"
 #include "Sensor/BME680Sensor.h"
-#include "Sensor/DHTSensor.h"
-#include "Sensor/DallasSensor.h"
 #include "Sensor/MCP9808Sensor.h"
 #include "Sensor/INA260Sensor.h"
 #include "Sensor/INA219Sensor.h"
 
-
+BMP280Sensor bmp280Sensor;
 BME280Sensor bme280Sensor;
 BME680Sensor bme680Sensor;
-DHTSensor dhtSensor;
-DallasSensor dallasSensor;
 MCP9808Sensor mcp9808Sensor;
 INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
@@ -31,7 +28,7 @@ INA219Sensor ina219Sensor;
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
 
-#ifdef HAS_EINK
+#ifdef USE_EINK
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16
 #define FONT_MEDIUM ArialMT_Plain_24
@@ -49,22 +46,16 @@ INA219Sensor ina219Sensor;
 
 int32_t EnvironmentTelemetryModule::runOnce()
 {
-#ifndef PORTDUINO
+#ifndef ARCH_PORTDUINO
     int32_t result = INT32_MAX;
     /*
         Uncomment the preferences below if you want to use the module
         without having to configure it from the PythonAPI or WebUI.
     */
    
-    /*
-    moduleConfig.telemetry.environment_measurement_enabled = 1;
-    moduleConfig.telemetry.environment_screen_enabled = 1;
-    moduleConfig.telemetry.environment_read_error_count_threshold = 5;
-    moduleConfig.telemetry.environment_update_interval = 600;
-    moduleConfig.telemetry.environment_recovery_interval = 60;
-    moduleConfig.telemetry.environment_sensor_pin = 13; // If one-wire
-    moduleConfig.telemetry.environment_sensor_type = TelemetrySensorType::TelemetrySensorType_BME280;
-    */
+    // moduleConfig.telemetry.environment_measurement_enabled = 1;
+    // moduleConfig.telemetry.environment_screen_enabled = 1;
+    // moduleConfig.telemetry.environment_update_interval = 45;
 
     if (!(moduleConfig.telemetry.environment_measurement_enabled ||
           moduleConfig.telemetry.environment_screen_enabled)) {
@@ -80,25 +71,12 @@ int32_t EnvironmentTelemetryModule::runOnce()
             DEBUG_MSG("Environment Telemetry: Initializing\n");
             // it's possible to have this module enabled, only for displaying values on the screen.
             // therefore, we should only enable the sensor loop if measurement is also enabled
-            
-            switch (moduleConfig.telemetry.environment_sensor_type) {
-                case TelemetrySensorType_DHT11:
-                case TelemetrySensorType_DHT12:
-                case TelemetrySensorType_DHT21:
-                case TelemetrySensorType_DHT22:
-                    result = dhtSensor.runOnce();
-                break;
-                case TelemetrySensorType_DS18B20:
-                    result = dallasSensor.runOnce();
-                break;
-                default:
-                    DEBUG_MSG("Environment Telemetry: No sensor type specified; Checking for detected i2c sensors\n");
-                break;
-            }
-            if (bme680Sensor.hasSensor()) 
-                result = bme680Sensor.runOnce();
+            if (bmp280Sensor.hasSensor()) 
+                result = bmp280Sensor.runOnce();
             if (bme280Sensor.hasSensor()) 
                 result = bme280Sensor.runOnce();
+            if (bme680Sensor.hasSensor()) 
+                result = bme680Sensor.runOnce();
             if (mcp9808Sensor.hasSensor()) 
                 result = mcp9808Sensor.runOnce();
             if (ina260Sensor.hasSensor()) 
@@ -113,26 +91,6 @@ int32_t EnvironmentTelemetryModule::runOnce()
             return result;
         // this is not the first time OSThread library has called this function
         // so just do what we intend to do on the interval
-        if (sensor_read_error_count > moduleConfig.telemetry.environment_read_error_count_threshold) {
-            if (moduleConfig.telemetry.environment_recovery_interval > 0) {
-                DEBUG_MSG("Environment Telemetry: TEMPORARILY DISABLED; The "
-                          "telemetry_module_environment_read_error_count_threshold has been exceed: %d. Will retry reads in "
-                          "%d seconds\n",
-                          moduleConfig.telemetry.environment_read_error_count_threshold,
-                          moduleConfig.telemetry.environment_recovery_interval);
-                sensor_read_error_count = 0;
-                return (moduleConfig.telemetry.environment_recovery_interval * 1000);
-            }
-            DEBUG_MSG("Environment Telemetry: DISABLED; The telemetry_module_environment_read_error_count_threshold has "
-                      "been exceed: %d. Reads will not be retried until after device reset\n",
-                      moduleConfig.telemetry.environment_read_error_count_threshold);
-            return result;
-
-        } else if (sensor_read_error_count > 0) {
-            DEBUG_MSG("Environment Telemetry: There have been %d sensor read failures. Will retry %d more times\n",
-                      sensor_read_error_count, sensor_read_error_count, sensor_read_error_count,
-                      moduleConfig.telemetry.environment_read_error_count_threshold - sensor_read_error_count);
-        }
         if (!sendOurTelemetry()) {
             // if we failed to read the sensor, then try again
             // as soon as we can according to the maximum polling frequency
@@ -242,21 +200,8 @@ bool EnvironmentTelemetryModule::sendOurTelemetry(NodeNum dest, bool wantReplies
     DEBUG_MSG("-----------------------------------------\n");
     DEBUG_MSG("Environment Telemetry: Read data\n");
 
-    switch (moduleConfig.telemetry.environment_sensor_type) {
-        case TelemetrySensorType_DS18B20:
-            if (!dallasSensor.getMetrics(&m))
-                sensor_read_error_count++;
-            break;
-        case TelemetrySensorType_DHT11:
-        case TelemetrySensorType_DHT12:
-        case TelemetrySensorType_DHT21:
-        case TelemetrySensorType_DHT22:
-            if (!dhtSensor.getMetrics(&m))
-                sensor_read_error_count++;
-            break;
-        default:
-            DEBUG_MSG("Environment Telemetry: No specified sensor type; Trying any detected i2c sensors\n");
-    }
+    if (bmp280Sensor.hasSensor())
+        bmp280Sensor.getMetrics(&m);
     if (bme280Sensor.hasSensor())
         bme280Sensor.getMetrics(&m);
     if (bme680Sensor.hasSensor())
@@ -284,6 +229,6 @@ bool EnvironmentTelemetryModule::sendOurTelemetry(NodeNum dest, bool wantReplies
 
     lastMeasurementPacket = packetPool.allocCopy(*p);
     DEBUG_MSG("Environment Telemetry: Sending packet to mesh");
-    service.sendToMesh(p);
+    service.sendToMesh(p, RX_SRC_LOCAL, true);
     return true;
 }

src/modules/Telemetry/EnvironmentTelemetry.h

@@ -15,7 +15,7 @@ class EnvironmentTelemetryModule : private concurrency::OSThread, public Protobu
         lastMeasurementPacket = nullptr;
     }
     virtual bool wantUIFrame() override;
-#ifdef NO_SCREEN
+#if !HAS_SCREEN
     void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 #else
     virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) override;

src/modules/Telemetry/Sensor/BMP280Sensor.cpp

@@ -0,0 +1,30 @@
+#include "../mesh/generated/telemetry.pb.h"
+#include "configuration.h"
+#include "TelemetrySensor.h"
+#include "BMP280Sensor.h"
+#include <Adafruit_BMP280.h>
+#include <typeinfo>
+
+BMP280Sensor::BMP280Sensor() : 
+    TelemetrySensor(TelemetrySensorType_BME280, "BMP280")
+{
+}
+
+int32_t BMP280Sensor::runOnce() {
+    DEBUG_MSG("Init sensor: %s\n", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+    status = bmp280.begin(nodeTelemetrySensorsMap[sensorType]); 
+    return initI2CSensor();
+}
+
+void BMP280Sensor::setup() { }
+
+bool BMP280Sensor::getMetrics(Telemetry *measurement) {
+    DEBUG_MSG("BMP280Sensor::getMetrics\n");
+    measurement->variant.environment_metrics.temperature = bmp280.readTemperature();
+    measurement->variant.environment_metrics.barometric_pressure = bmp280.readPressure() / 100.0F;
+
+    return true;
+}    

src/modules/Telemetry/Sensor/BMP280Sensor.h

@@ -1,16 +1,16 @@
 #include "../mesh/generated/telemetry.pb.h"
 #include "TelemetrySensor.h"
-#include <DHT.h>
+#include <Adafruit_BMP280.h>
 
-class DHTSensor : virtual public TelemetrySensor {
+class BMP280Sensor : virtual public TelemetrySensor {
 private:
-    DHT *dht = NULL;
+    Adafruit_BMP280 bmp280;
 
 protected:
     virtual void setup() override;
 
 public:
-    DHTSensor();
+    BMP280Sensor();
     virtual int32_t runOnce() override;
     virtual bool getMetrics(Telemetry *measurement) override;
 };    

src/modules/Telemetry/Sensor/DHTSensor.cpp

@@ -1,39 +0,0 @@
-#include "DHTSensor.h"
-#include "./mesh/generated/telemetry.pb.h"
-#include "MeshService.h"
-#include "TelemetrySensor.h"
-#include "configuration.h"
-#include <DHT.h>
-
-DHTSensor::DHTSensor() : 
-    TelemetrySensor(TelemetrySensorType_NotSet, "DHT") 
-{
-}
-
-int32_t DHTSensor::runOnce() {
-    if (moduleConfig.telemetry.environment_sensor_type == TelemetrySensorType_DHT11 || 
-        moduleConfig.telemetry.environment_sensor_type == TelemetrySensorType_DHT12) {
-        dht = new DHT(moduleConfig.telemetry.environment_sensor_pin, DHT11);
-    } else {
-        dht = new DHT(moduleConfig.telemetry.environment_sensor_pin, DHT22);
-    }
-
-    dht->begin();
-    dht->read();
-    DEBUG_MSG("Opened DHT11/DHT12 on pin: %d\n", moduleConfig.telemetry.environment_sensor_pin);
-
-    return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
-}
-
-void DHTSensor::setup() { }
-
-bool DHTSensor::getMetrics(Telemetry *measurement) {
-    DEBUG_MSG("DHTSensor::getMetrics\n");
-    if (!dht->read(true)) {
-        DEBUG_MSG("Telemetry: FAILED TO READ DATA\n");
-        return false;
-    }
-    measurement->variant.environment_metrics.relative_humidity = dht->readHumidity();
-    measurement->variant.environment_metrics.temperature = dht->readTemperature();
-    return true;
-}

src/modules/Telemetry/Sensor/DallasSensor.cpp

@@ -1,35 +0,0 @@
-#include "DallasSensor.h"
-#include "../mesh/generated/telemetry.pb.h"
-#include "MeshService.h"
-#include "TelemetrySensor.h"
-#include "configuration.h"
-#include <DS18B20.h>
-#include <OneWire.h>
-
-DallasSensor::DallasSensor() : 
-    TelemetrySensor(TelemetrySensorType_DS18B20, "DS18B20") 
-{
-}
-
-int32_t DallasSensor::runOnce() {
-    oneWire = new OneWire(moduleConfig.telemetry.environment_sensor_pin);
-    ds18b20 = new DS18B20(oneWire);
-    ds18b20->begin();
-    ds18b20->setResolution(12);
-    ds18b20->requestTemperatures();
-    DEBUG_MSG("Opened DS18B20 on pin: %d\n", moduleConfig.telemetry.environment_sensor_pin);
-    return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
-}
-
-void DallasSensor::setup() {}
-
-bool DallasSensor::getMetrics(Telemetry *measurement){
-    DEBUG_MSG("DallasSensor::getMetrics\n");
-    if (ds18b20->isConversionComplete()) {
-        measurement->variant.environment_metrics.temperature = ds18b20->getTempC();
-        measurement->variant.environment_metrics.relative_humidity = 0;
-        ds18b20->requestTemperatures();
-        return true;
-    }
-    return false;
-}

src/modules/Telemetry/Sensor/DallasSensor.h

@@ -1,18 +0,0 @@
-#include "../mesh/generated/telemetry.pb.h"
-#include "TelemetrySensor.h"
-#include <DS18B20.h>
-#include <OneWire.h>
-
-class DallasSensor : virtual public TelemetrySensor {
-private:
-    OneWire *oneWire = NULL;
-    DS18B20 *ds18b20 = NULL;
-
-protected:
-    virtual void setup() override;
-
-public:
-    DallasSensor();
-    virtual int32_t runOnce() override;
-    virtual bool getMetrics(Telemetry *measurement) override;
-};    

src/modules/esp32/RangeTestModule.cpp

@@ -29,7 +29,7 @@ uint32_t packetSequence = 0;
 
 int32_t RangeTestModule::runOnce()
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     /*
         Uncomment the preferences below if you want to use the module
@@ -129,7 +129,7 @@ void RangeTestModuleRadio::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage RangeTestModuleRadio::handleReceived(const MeshPacket &mp)
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     if (moduleConfig.range_test.enabled) {
 

src/modules/esp32/SerialModule.cpp

@@ -69,7 +69,7 @@ SerialModuleRadio::SerialModuleRadio() : SinglePortModule("SerialModuleRadio", P
 
 int32_t SerialModule::runOnce()
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     /*
         Uncomment the preferences below if you want to use the module
@@ -209,7 +209,7 @@ void SerialModuleRadio::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage SerialModuleRadio::handleReceived(const MeshPacket &mp)
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     if (moduleConfig.serial.enabled) {
 

src/modules/esp32/StoreForwardModule.cpp

@@ -17,7 +17,7 @@ StoreForwardModule *storeForwardModule;
 int32_t StoreForwardModule::runOnce()
 {
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     if (moduleConfig.store_forward.enabled) {
 
@@ -241,7 +241,7 @@ void StoreForwardModule::sendMessage(NodeNum dest, char *str)
 
 ProcessMessage StoreForwardModule::handleReceived(const MeshPacket &mp)
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     if (moduleConfig.store_forward.enabled) {
 
         DEBUG_MSG("--- S&F Received something\n");
@@ -381,7 +381,7 @@ StoreForwardModule::StoreForwardModule()
     : SinglePortModule("StoreForwardModule", PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("StoreForwardModule")
 {
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     isPromiscuous = true; // Brown chicken brown cow
 

src/nimble/BluetoothUtil.cpp

@@ -15,7 +15,7 @@
 #include "sleep.h"
 #include <WiFi.h>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "mesh/http/WiFiAPClient.h"
 #include <nvs_flash.h>
 #endif
@@ -508,7 +508,7 @@ void disablePin()
 // This should go somewhere else.
 void clearNVS()
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     // As soon as the LED flashing from double click is done, immediately do a tripple click to
     // erase nvs memory.

src/nrf52/architecture.h

@@ -0,0 +1,91 @@
+#pragma once
+
+#define ARCH_NRF52
+
+//
+// defaults for NRF52 architecture
+//
+
+#ifndef HAS_SCREEN
+    #define HAS_SCREEN 1
+#endif
+#ifndef HAS_WIRE
+    #define HAS_WIRE 1
+#endif
+#ifndef HAS_GPS
+    #define HAS_GPS 1
+#endif
+#ifndef HAS_BUTTON
+    #define HAS_BUTTON 1
+#endif
+#ifndef HAS_TELEMETRY
+    #define HAS_TELEMETRY 1
+#endif
+#ifndef HAS_RADIO
+    #define HAS_RADIO 1
+#endif
+
+//
+// set HW_VENDOR
+//
+
+// This string must exactly match the case used in release file names or the android updater won't work
+#ifdef ARDUINO_NRF52840_PCA10056
+    #define HW_VENDOR HardwareModel_NRF52840DK
+#elif defined(ARDUINO_NRF52840_PPR)
+    #define HW_VENDOR HardwareModel_PPR
+#elif defined(RAK4630)
+    #define HW_VENDOR HardwareModel_RAK4631
+#elif defined(TTGO_T_ECHO)
+    #define HW_VENDOR HardwareModel_T_ECHO
+#elif defined(NORDIC_PCA10059)
+    #define HW_VENDOR HardwareModel_NRF52840_PCA10059
+#else
+    #define HW_VENDOR HardwareModel_NRF52_UNKNOWN
+#endif
+
+//
+// Standard definitions for NRF52 targets
+//
+
+#ifdef ARDUINO_NRF52840_PCA10056
+
+// This board uses 0 to be mean LED on
+#undef LED_INVERTED
+#define LED_INVERTED 1
+
+#endif
+
+#ifndef TTGO_T_ECHO
+#define GPS_UBLOX
+#endif
+
+#define LED_PIN PIN_LED1 // LED1 on nrf52840-DK
+
+#ifdef PIN_BUTTON1
+#define BUTTON_PIN PIN_BUTTON1
+#endif
+
+#ifdef PIN_BUTTON2
+#define BUTTON_PIN_ALT PIN_BUTTON2
+#endif
+
+#ifdef PIN_BUTTON_TOUCH
+#define BUTTON_PIN_TOUCH PIN_BUTTON_TOUCH
+#endif
+
+// Always include the SEGGER code on NRF52 - because useful for debugging
+#include "SEGGER_RTT.h"
+
+// The channel we send stdout data to
+#define SEGGER_STDOUT_CH 0
+
+// Debug printing to segger console
+#define SEGGER_MSG(...) SEGGER_RTT_printf(SEGGER_STDOUT_CH, __VA_ARGS__)
+
+// If we are not on a NRF52840 (which has built in USB-ACM serial support) and we don't have serial pins hooked up, then we MUST
+// use SEGGER for debug output
+#if !defined(PIN_SERIAL_RX) && !defined(NRF52840_XXAA)
+// No serial ports on this board - ONLY use segger in memory console
+#define USE_SEGGER
+#endif

src/nrf52/main-nrf52.cpp

@@ -161,7 +161,7 @@ void cpuDeepSleep(uint64_t msecToWake)
 {
     // FIXME, configure RTC or button press to wake us
     // FIXME, power down SPI, I2C, RAMs
-#ifndef NO_WIRE
+#if HAS_WIRE
     Wire.end();
 #endif
     SPI.end();

src/portduino/architecture.h

@@ -0,0 +1,16 @@
+#pragma once
+
+#define ARCH_PORTDUINO
+
+//
+// defaults for NRF52 architecture
+//
+
+//
+// set HW_VENDOR
+//
+
+#define HW_VENDOR HardwareModel_PORTDUINO
+
+#define HAS_RTC 1
+#define HAS_WIFI 1

src/shutdown.h

@@ -8,21 +8,28 @@ void powerCommandsCheck()
 {
     if (rebootAtMsec && millis() > rebootAtMsec) {
         DEBUG_MSG("Rebooting\n");
-#ifndef NO_ESP32
+#if defined(ARCH_ESP32)
         ESP.restart();
-#elif NRF52_SERIES
+#elif defined(ARCH_NRF52)
         NVIC_SystemReset();
 #else
         DEBUG_MSG("FIXME implement reboot for this platform");
 #endif
     }
 
-#if NRF52_SERIES
+#if defined(ARCH_NRF52)
     if (shutdownAtMsec) {
         screen->startShutdownScreen();
         playBeep();
+#ifdef PIN_LED1
         ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
         ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+        ledOff(PIN_LED3);
+#endif
     }
 #endif
 
@@ -33,7 +40,7 @@ void powerCommandsCheck()
             playShutdownMelody();
             power->shutdown();
         }
-#elif NRF52_SERIES
+#elif defined(ARCH_NRF52)
         playShutdownMelody();
         power->shutdown();
 #else

src/sleep.cpp

@@ -8,7 +8,7 @@
 #include "main.h"
 #include "target_specific.h"
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp32/pm.h"
 #include "esp_pm.h"
 #include "mesh/http/WiFiAPClient.h"
@@ -48,7 +48,7 @@ RTC_DATA_ATTR int bootCount = 0;
  */
 void setCPUFast(bool on)
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     if (isWifiAvailable()) {
         /*
@@ -101,7 +101,7 @@ void setGPSPower(bool on)
 // Perform power on init that we do on each wake from deep sleep
 void initDeepSleep()
 {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     bootCount++;
     wakeCause = esp_sleep_get_wakeup_cause();
     /*
@@ -207,7 +207,7 @@ void doDeepSleep(uint64_t msecToWake)
     cpuDeepSleep(msecToWake);
 }
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 /**
  * enter light sleep (preserves ram but stops everything about CPU).
  *

src/sleep.h

@@ -6,7 +6,7 @@
 
 void doDeepSleep(uint64_t msecToWake), cpuDeepSleep(uint64_t msecToWake);
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp_sleep.h"
 esp_sleep_wakeup_cause_t doLightSleep(uint64_t msecToWake);
 

src/wifi-stubs.cpp

@@ -1,7 +1,7 @@
 //#include "mesh/wifi/WebServer.h"
 #include "configuration.h"
 
-#ifdef NO_ESP32
+#ifndef ARCH_ESP32
 
 //#include "mesh/wifi/WiFiAPClient.h"
 

variants/Dongle_nRF52840-pca10059-v1/variant.h

@@ -123,7 +123,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_SCLK  (9)           // EPD_SCLK	
 #define PIN_EINK_MOSI  (10)          // EPD_MOSI	
 
-#define HAS_EINK
+#define USE_EINK
 
 /*
  * Wire Interfaces

variants/lora_isp4520/variant.h

@@ -90,7 +90,4 @@
 
 #define SX126X_E22 // Not really an E22 but this board clones using DIO3 for tcxo control
 
-#define NO_WIRE
-#define NO_GPS
-#define NO_SCREEN
 #endif

variants/m5stack_coreink/variant.h

@@ -32,12 +32,11 @@
 #define LORA_DIO1 RADIOLIB_NC
 #define LORA_DIO2 RADIOLIB_NC
 
-#define NO_GPS
 // This board has no GPS for now
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 
-#define HAS_EINK
+#define USE_EINK
 //https://docs.m5stack.com/en/core/coreink
 //https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/coreink/coreink_sch.pdf
 #define PIN_EINK_EN    -1
@@ -47,3 +46,5 @@
 #define PIN_EINK_RES   -1          // Connected to GPIO0 but no needed !!!! maybe causing issue ?
 #define PIN_EINK_SCLK  18           // EPD_SCLK
 #define PIN_EINK_MOSI  23          // EPD_MOSI
+
+#define HAS_RTC 1

variants/portduino/platformio.ini

@@ -5,6 +5,7 @@ build_src_filter =
   -<esp32/> 
   -<nimble/> 
   -<nrf52/> 
+  -<stm32wl/> 
   -<mesh/http/> 
   -<modules/esp32>
   -<modules/Telemetry>
@@ -14,10 +15,11 @@ lib_deps =
   ${networking_base.lib_deps}
   rweather/Crypto
   https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74
+build_flags = ${arduino_base.build_flags} -Isrc/portduino
 
 [env:native]
 platform = https://github.com/meshtastic/platform-native.git 
-build_flags = ${arduino_base.build_flags} -O0 -I variants/portduino
+build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino
 framework = arduino
 board = cross_platform
 lib_deps = ${portduino_base.lib_deps}
@@ -26,8 +28,8 @@ build_src_filter = ${portduino_base.build_src_filter}
 ; The Portduino based sim environment on top of a linux OS and touching linux hardware devices
 [env:linux]
 platform = https://github.com/meshtastic/platform-native.git 
-build_flags = ${arduino_base.build_flags} -O0 -lgpiod -I variants/portduino
+build_flags = ${portduino_base.build_flags} -O0 -lgpiod -I variants/portduino
 framework = arduino
 board = linux_hardware
 lib_deps = ${portduino_base.lib_deps}
-build_src_filter = ${portduino_base.build_src_filter}
+build_src_filter = ${portduino_base.build_src_filter}

variants/portduino/variant.h

@@ -1,5 +1,3 @@
-#define USE_SIM_RADIO
-
 // Pine64 uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
 // not found then probe for SX1262.  Currently the RF95 code is disabled because I think the RF95 module won't need to ship.
 // #define USE_RF95
@@ -37,4 +35,4 @@
 #define RADIOLIB_SX127X_REG_TCXO SX127X_REG_TCXO
 #define RADIOLIB_SX127X_REG_MODEM_STAT SX127X_REG_MODEM_STAT
 #define RADIOLIB_SX127X_SYNC_WORD SX127X_SYNC_WORD
-#define RADIOLIB_SX127X_MASK_IRQ_FLAG_VALID_HEADER SX127X_MASK_IRQ_FLAG_VALID_HEADER
+#define RADIOLIB_SX127X_MASK_IRQ_FLAG_VALID_HEADER SX127X_MASK_IRQ_FLAG_VALID_HEADER

variants/rak4631/platformio.ini

@@ -1,4 +1,4 @@
-; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmare for 5005/19003, with or without OLED RAK 1921
+; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:rak4631]
 extends = nrf52840_base
 board = wiscore_rak4631

variants/rak4631/variant.h

@@ -139,7 +139,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 // FIXME - I think this is actually just the board power enable - it enables power to the CPU also 
 //#define PIN_EINK_PWR_ON (-1)
 
-// #define HAS_EINK
+// #define USE_EINK
 
 /*
  * Wire Interfaces
@@ -224,6 +224,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define ADC_MULTIPLIER VBAT_DIVIDER_COMP //REAL_VBAT_MV_PER_LSB
 #define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
 
+#define HAS_RTC 1
+
 #ifdef __cplusplus
 }
 #endif

variants/rak4631_epaper/variant.h

@@ -139,7 +139,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 // FIXME - I think this is actually just the board power enable - it enables power to the CPU also 
 //#define PIN_EINK_PWR_ON (-1)
 
-#define HAS_EINK
+#define USE_EINK
 
 /*
  * Wire Interfaces
@@ -221,6 +221,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define ADC_MULTIPLIER VBAT_DIVIDER_COMP //REAL_VBAT_MV_PER_LSB
 #define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
 
+#define HAS_RTC 1
+
 #ifdef __cplusplus
 }
 #endif

variants/station-g1/platformio.ini

@@ -0,0 +1,8 @@
+; The 1.0 release of the nano-g1 board 
+[env:station-g1]
+extends = esp32_base
+board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
+build_flags = 
+  ${esp32_base.build_flags} -D STATION_G1  -I variants/station-g1

variants/station-g1/variant.h

@@ -0,0 +1,36 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+#define BUTTON_PIN 36     // The middle button GPIO on the Nano G1
+//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
+#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
+
+// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_RF95
+#define USE_SX1262
+
+#define LORA_DIO0 26 // a No connect on the SX1262 module
+#define LORA_RESET 23
+#define LORA_DIO1 33 // SX1262 IRQ
+#define LORA_DIO2 32 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+//#define SX126X_E22 // Not really an E22 
+// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+#endif
+
+#define BATTERY_PIN 35    // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_SENSE_SAMPLES 30  //Set the number of samples, It has an effect of increasing sensitivity.
+#define ADC_MULTIPLIER 2.15
+
+// different screen
+#define USE_SH1106

variants/t-echo/variant.h

@@ -139,7 +139,6 @@ External serial flash WP25R1635FZUIL0
 // #define LORA_DISABLE_SENDING // Define this to disable transmission for testing (power testing etc...)
 
 // #undef SX126X_CS
-// #define USE_SIM_RADIO // define to not use the lora radio hardware at all
 
 /*
  * eink display pins
@@ -157,7 +156,7 @@ External serial flash WP25R1635FZUIL0
 // FIXME - I think this is actually just the board power enable - it enables power to the CPU also 
 #define PIN_EINK_PWR_ON (0 + 12)
 
-#define HAS_EINK
+#define USE_EINK
 
 // No screen wipes on eink
 #define SCREEN_TRANSITION_MSECS 0
@@ -220,6 +219,8 @@ External serial flash WP25R1635FZUIL0
 #define ADC_MULTIPLIER VBAT_DIVIDER_COMP 
 #define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
 
+#define HAS_RTC 1
+
 #ifdef __cplusplus
 }
 #endif

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 1
 minor = 3
-build = 27
+build = 30