Merge pull request #1839 from meshtastic/pwm-notify

use PWM buzzer on notification module.

.github/workflows/main_matrix.yml

@@ -5,7 +5,6 @@ on:
     branches: [master]
     paths-ignore:
       - "**.md"
-      - "**.yml"
       - "version.properties"
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
@@ -13,7 +12,7 @@ on:
     branches: [master]
     paths-ignore:
       - "**.md"
-      - "**.yml"
+      #- "**.yml"
 
   workflow_dispatch:
 
@@ -38,8 +37,11 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+          - board: tbeam-s3-core
+        # - board: pico
           
     runs-on: ubuntu-latest
     steps:
@@ -55,12 +57,12 @@ jobs:
           sudo apt-get install -y cppcheck
 
       - name: Setup Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3.x
 
       - name: Cache python libs
-        uses: actions/cache@v1
+        uses: actions/cache@v3
         id: cache-pip # needed in if test
         with:
           path: ~/.cache/pip
@@ -95,8 +97,10 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
+          - board: tbeam-s3-core
 
     runs-on: ubuntu-latest
     steps:
@@ -108,12 +112,12 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3.x
 
       - name: Cache python libs
-        uses: actions/cache@v1
+        uses: actions/cache@v3
         id: cache-pip # needed in if test
         with:
           path: ~/.cache/pip
@@ -122,13 +126,12 @@ jobs:
       - name: Upgrade python tools
         run: |
           python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil littlefs-python
-          pip install -U --pre meshtastic
+          pip install -U platformio adafruit-nrfutil
 
       - name: Upgrade platformio
         run: |
           pio upgrade
-
+          
       - name: Pull web ui
         uses: dsaltares/fetch-gh-release-asset@master
         with:
@@ -144,13 +147,21 @@ jobs:
 
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ matrix.board }}
-
+         
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/Meshtastic-OTA"
+          file: "firmware.bin"
+          target: "release/bleota.bin"
+          token: ${{ secrets.GITHUB_TOKEN }}
+          
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
           path: |
@@ -179,12 +190,12 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3.x
 
       - name: Cache python libs
-        uses: actions/cache@v1
+        uses: actions/cache@v3
         id: cache-pip # needed in if test
         with:
           path: ~/.cache/pip
@@ -194,7 +205,6 @@ jobs:
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio adafruit-nrfutil
-          pip install -U --pre meshtastic
 
       - name: Upgrade platformio
         run: |
@@ -204,11 +214,66 @@ jobs:
         run: bin/build-nrf52.sh ${{ matrix.board }}
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.zip
+          retention-days: 90
+
+  build-rpi2040:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: pico
+
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Setup Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v3
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Build Raspberry Pi 2040
+        run: ./bin/build-rpi2040.sh ${{ matrix.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
           path: |
@@ -227,12 +292,12 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3.x
 
       - name: Cache python libs
-        uses: actions/cache@v1
+        uses: actions/cache@v3
         id: cache-pip # needed in if test
         with:
           path: ~/.cache/pip
@@ -242,7 +307,7 @@ jobs:
         run: |
           python -m pip install --upgrade pip
           pip install -U platformio adafruit-nrfutil
-          pip install -U --pre meshtastic
+          pip install -U meshtastic --pre
 
       - name: Upgrade platformio
         run: |
@@ -262,11 +327,11 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-native-${{ steps.version.outputs.version }}.zip
           path: |
@@ -287,7 +352,7 @@ jobs:
 
   gather-artifacts:
     runs-on: ubuntu-latest
-    needs: [build-esp32, build-nrf52, build-native]
+    needs: [build-esp32, build-nrf52, build-native, build-rpi2040]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -295,30 +360,31 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           path: ./
 
       - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-*/littlefs*.bin ./*tbeam-*/system-info.bin ./**/firmware*.bin ./**/*.uf2 ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-1*/littlefs*.bin ./*tbeam-1*/bleota.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: |
             ./*.bin
             ./*.uf2
+            ./firmware-*-ota.zip
             ./meshtasticd_linux_amd64
             ./device-*.sh
             ./device-*.bat
           retention-days: 90
 
-      - uses: actions/download-artifact@v2
+      - uses: actions/download-artifact@v3
         with:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
@@ -326,12 +392,17 @@ jobs:
       # For diagnostics
       - name: Show artifacts
         run: ls -lR
+        
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v3
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
           path: ./*.elf
@@ -348,3 +419,89 @@ jobs:
           artifacts-branch: device
           artifacts-dir: pr
           artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [gather-artifacts, after-checks]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+          
+      - name: Setup Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v3
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: ./output
+      
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - uses: actions/download-artifact@v3
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./elfs
+      
+      - name: Zip Elfs
+        run: zip -j -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: Meshtastic Device ${{ steps.version.outputs.version }} Alpha
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+          
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v3
+        with:
+          add-paths: |
+            version.properties
+

.github/workflows/release.yml

@@ -1,92 +0,0 @@
-name: Make Release
-on:
-  # Can optionally take parameters from the github UI, more info here https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/#:~:text=You%20can%20now%20create%20workflows,the%20workflow%20is%20run%20on.
-  workflow_dispatch:
-  #  inputs:
-
-  # Only want to run if version.properties is bumped in master
-  push:
-    branches:
-      - master
-    paths:
-      - "version.properties"
-
-jobs:
-  release-build:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v3
-        with:
-          submodules: "recursive"
-
-      - name: Setup Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      # Will be available in steps.version.outputs.version
-      - name: Get release version string
-        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
-        id: version
-      # Note: we don't use caches on release builds because we don't want to accidentally not have a virgin build machine
-
-      - name: Upgrade python tools
-        # We actually want to run this every time
-        # if: steps.cache-pip.outputs.cache-hit != 'true'
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio meshtastic adafruit-nrfutil littlefs-python
-
-      - name: Upgrade platformio
-        run: |
-          pio upgrade
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: "meshtastic/meshtastic-web"
-          file: "build.tar"
-          target: "build.tar"
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Build everything
-        run: bin/build-all.sh
-
-      - name: Create release
-        uses: actions/create-release@v1
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          release_name: ${{ steps.version.outputs.version }} alpha
-          tag_name: v${{ steps.version.outputs.version }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: release/archive/elfs-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

.vscode/settings.json

@@ -52,7 +52,9 @@
         "shared_mutex": "cpp",
         "iostream": "cpp",
         "esp_nimble_hci.h": "c",
-        "map": "cpp"
+        "map": "cpp",
+        "random": "cpp",
+        "*.tpp": "cpp"
     },
     "cSpell.words": [
         "Blox",

arch/esp32/esp32.ini

@@ -0,0 +1,53 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#657509856ce97e9dddeffb89a559f544faefd5cd
+  h2zero/NimBLE-Arduino@^1.4.0
+  arduino-libraries/NTPClient@^3.1.0
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv

arch/esp32/esp32s3.ini

@@ -0,0 +1,46 @@
+[esp32s3_base]
+extends = arduino_base
+platform = platformio/espressif32@^5.2.0
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
+upload_speed = 961200
+monitor_speed = 115200
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_flags =
+  ${arduino_base.build_flags} 
+  -Wall 
+  -Wextra 
+  -Isrc/platform/esp32 
+  -std=c++11 
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG 
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG 
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial 
+  -DCONFIG_BT_NIMBLE_ENABLED 
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING  
+  
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git#657509856ce97e9dddeffb89a559f544faefd5cd
+  h2zero/NimBLE-Arduino@^1.4.0
+  arduino-libraries/NTPClient@^3.1.0
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
+

arch/nrf52/nrf52.ini

@@ -0,0 +1,18 @@
+[nrf52_base]
+; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
+platform = platformio/nordicnrf52@^9.4.0
+
+extends = arduino_base
+build_type = debug ; I'm debugging with ICE a lot now
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/nrf52
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040>
+lib_ignore =
+  BluetoothOTA
+  
+; Note: By default no lora device is created for this build - it uses a simulated interface
+[env:feather_nrf52832]
+extends = nrf52_base
+board = adafruit_feather_nrf52832  

arch/nrf52/nrf52840.ini

@@ -0,0 +1,14 @@
+[nrf52840_base]
+extends = nrf52_base
+build_flags = ${nrf52_base.build_flags} 
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+
+; Note: By default no lora device is created for this build - it uses a simulated interface
+[env:nrf52840dk]
+extends = nrf52840_base
+board = nrf52840_dk
+
+

arch/portduino/portduino.ini

@@ -0,0 +1,19 @@
+; The Portduino based sim environment on top of any host OS, all hardware will be simulated
+[portduino_base]
+build_src_filter = 
+  ${env.build_src_filter} 
+  -<platform/esp32/> 
+  -<nimble/> 
+  -<platform/nrf52/> 
+  -<platform/stm32wl/> 
+  -<platform/rp2040>
+  -<mesh/http/> 
+  -<modules/esp32>
+  -<modules/Telemetry>
+  +<../variants/portduino>
+lib_deps =
+  ${env.lib_deps}
+  ${networking_base.lib_deps}
+  rweather/Crypto@^0.4.0
+  https://github.com/meshtastic/RadioLib.git#5582ac30578ff3f53f20630a00b2a8a4b8f92c74
+build_flags = ${arduino_base.build_flags} -Isrc/platform/portduino

arch/rp2040/rp2040.ini

@@ -0,0 +1,19 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#5ce1a228e7cae453f366deb8962252b9b7356bbc
+extends = arduino_base
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2040
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl>
+lib_ignore =
+  BluetoothOTA
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

arch/stm32/stm32wl5e.ini

@@ -0,0 +1,18 @@
+[stm32wl5e_base]
+platform = platformio/ststm32@^15.4.1
+board = generic_wl5e
+framework = arduino
+build_type = debug
+build_flags = 
+  ${arduino_base.build_flags}
+  -Isrc/platform/stm32wl -g
+  -DHAL_SUBGHZ_MODULE_ENABLED
+#  Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
+#  -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+lib_deps =
+  ${env.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+lib_ignore = 
+  mathertel/OneButton@^2.0.3

bin/build-all.sh.legacy

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

bin/build-esp32.sh

@@ -29,13 +29,11 @@ SRCELF=.pio/build/$1/firmware.elf
 cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying ESP32 bin file"
-SRCBIN=.pio/build/$1/firmware.bin
+SRCBIN=.pio/build/$1/firmware.factory.bin
 cp $SRCBIN $OUTDIR/$basename.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment tbeam -t buildfs
-cp .pio/build/tbeam/spiffs.bin $OUTDIR/littlefs-$VERSION.bin
-cp images/system-info.bin $OUTDIR/system-info.bin
-
+cp .pio/build/tbeam/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-nrf52.sh

@@ -26,7 +26,9 @@ basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
 SRCELF=.pio/build/$1/firmware.elf
+DFUPKG=.pio/build/$1/firmware.zip
 cp $SRCELF $OUTDIR/$basename.elf
+cp $DFUPKG $OUTDIR/$basename-ota.zip
 
 echo "Generating NRF52 uf2 file"
 SRCHEX=.pio/build/$1/firmware.hex
@@ -34,3 +36,4 @@ bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
 
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
+cp bin/*.uf2 $OUTDIR

bin/build-rpi2040.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Make sure our submodules are current
+git submodule update 
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio lib update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying uf2 file"
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/bump_version.py

@@ -0,0 +1,16 @@
+#!/usr/bin/env python
+"""Bump the version number"""
+
+lines = None
+
+with open('version.properties', 'r', encoding='utf-8') as f:
+    lines = f.readlines()
+
+with open('version.properties', 'w', encoding='utf-8') as f:
+    for line in lines:
+        if line.lstrip().startswith("build = "):
+            words = line.split(" = ")
+            ver = f'build = {int(words[1]) + 1}'
+            f.write(f'{ver}\n')
+        else:
+            f.write(line)

bin/check-dependencies.sh

@@ -0,0 +1,23 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+if [[ $# -gt 0 ]]; then
+    # can override which environment by passing arg
+    BOARDS="$@"
+else
+    BOARDS="rak4631 rak4631_eink t-echo pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+     CHECK="${CHECK} -e ${BOARD}"
+done
+
+echo $CHECK
+
+pio pkg outdated -e $CHECK

bin/device-install.bat

@@ -29,14 +29,14 @@ IF "__%FILENAME%__" == "____" (
 IF EXIST %FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
 	%PYTHON% -m esptool --baud 115200 erase_flash
-	%PYTHON% -m esptool --baud 115200 write_flash 0x1000 system-info.bin
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+	%PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
     for %%f in (littlefs-*.bin) do (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x00390000 %%f
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )
-	%PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
 	goto HELP
 )
 
-:EOF
+:EOF

bin/device-install.sh

@@ -47,9 +47,10 @@ shift "$((OPTIND-1))"
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool  erase_flash
-	"$PYTHON" -m esptool  write_flash 0x1000 system-info.bin
-	"$PYTHON" -m esptool  write_flash 0x00390000 littlefs-*.bin
-	"$PYTHON" -m esptool  write_flash 0x10000 ${FILENAME}
+	"$PYTHON" -m esptool  write_flash 0x00 ${FILENAME}
+    "$PYTHON" -m esptool  write_flash 0x260000 bleota.bin
+	"$PYTHON" -m esptool  write_flash 0x300000 littlefs-*.bin
+
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/device-update.bat

@@ -28,12 +28,10 @@ IF "__%FILENAME%__" == "____" (
 )
 IF EXIST %FILENAME% (
     echo Trying to flash update %FILENAME%
-    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
-    echo Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used
-    %PYTHON% -m esptool --baud 115200 erase_region 0xe000 0x2000
+    %PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
 	goto HELP
 )
 
-:EOF
+:EOF

bin/device-update.sh

@@ -44,9 +44,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash update ${FILENAME}."
-	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
-	echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
-	$PYTHON -m esptool --baud 115200 erase_region 0xe000 0x2000
+	$PYTHON -m esptool --baud 115200 write_flash 0x00 ${FILENAME}
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/mklittlefs.py

@@ -1,51 +0,0 @@
-#!/usr/bin/env python3
-import getopt
-import sys
-import os
-from littlefs import LittleFS
-from pathlib import Path
-
-print( "Building LittleFS image..." )
-
-argList = sys.argv[1:]
-arxx = { argList[i]: argList[i+1] for i in range(0, len(argList)-1, 2) }
-
-dataPath = arxx["-c"]
-blockSize = int(arxx["-b"])
-blockCount = int(arxx["-s"]) / blockSize
-
-cwd = os.getcwd()
-
-os.chdir(dataPath)
-
-fileList = []
-dirList = []
-
-for (dirpath, dirnames, filenames) in os.walk('.'):
-    for f in filenames:
-        if (f[:1] != '.'):
-            fileList.append( os.path.join(dirpath, f) )
-    for d in dirnames:
-        if (d[:1] != '.'):
-            dirList.append( os.path.join(dirpath, d) )
-
-fs = LittleFS(block_size=blockSize, block_count=blockCount) # create a 448kB partition
-
-for curDir in dirList:
-    print( "Creating dir " + curDir )
-    fs.mkdir( curDir )
-        
-for curFile in fileList:
-    print( "Adding file " + curFile )
-    with open( curFile, 'rb' ) as f:
-        data = f.read()
-
-    with fs.open( curFile, 'wb') as fh:
-        fh.write( data )
-
-outName = argList[-1]
-
-os.chdir(cwd)
-
-with open(outName, 'wb') as fh:
-    fh.write(fs.context.buffer)

bin/platformio-custom.py

@@ -1,24 +1,70 @@
-
-
 import subprocess
 import configparser
 import traceback
 import sys
+from os.path import join
 from readprops import readProps
 
 Import("env")
-env.Replace( MKSPIFFSTOOL=env.get("PROJECT_DIR") + '/bin/mklittlefs.py' )
-try:
-    import littlefs
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install littlefs-python")
+platform = env.PioPlatform()
+
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
+
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
+    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
+    ]
+
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
+
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+
+    esptool.main(cmd)
+
+if (platform.name == "espressif32"):
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)    
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmare version " + verObj['long'])
-# print("path is" + ','.join(sys.path))
+print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
 
 # General options that are passed to the C and C++ compilers
 projenv.Append(CCFLAGS=[

bin/readprops.py

@@ -32,6 +32,6 @@ def readProps(prefsLoc):
         # traceback.print_exc()
         verObj['long'] = verObj['short']
 
-    # print("firmare version " + verStr)
+    # print("firmware version " + verStr)
     return verObj
 # print("path is" + ','.join(sys.path))

boards/generic_wl5e.json

@@ -0,0 +1,31 @@
+{
+  "build": {
+    "core": "stm32",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
+    "f_cpu": "48000000L",
+    "mcu": "stm32wle5ccu",
+    "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",
+    "product_line": "STM32WLE5xx"
+  },
+  "debug": {
+    "default_tools": [
+      "stlink"
+    ],
+    "jlink_device": "STM32WLE5CC",
+    "openocd_target": "stm32wlx",
+    "svd_path": "STM32WLE5_CM4.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BB-STM32WL",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 262144,
+    "protocol": "cmsis-dap",
+    "protocols": [
+      "cmsis-dap"
+    ]
+  },
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
+  "vendor": "ST"
+}

boards/tbeam-s3-core.json

@@ -0,0 +1,48 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DLILYGO_TBEAM_S3_CORE",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_DFU_ON_BOOT=1",
+      "-DARDUINO_USB_MSC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [
+      [
+        "0X303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "tbeam-s3-core"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "LilyGo TBeam-S3-Core",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "http://www.lilygo.cn/",
+  "vendor": "LilyGo"
+}

partition-table.csv

@@ -1,8 +1,8 @@
 # FIXME! using the genpartitions based table doesn't work on TTGO so for now I stay with my old memory map
 # This is a layout for 4MB of flash
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x1c0000,
-app1,     app,  ota_1,   0x1d0000,0x1c0000,
-spiffs,   data, spiffs,  0x390000,0x070000,
+nvs,      data, nvs,     0x009000, 0x005000,
+otadata,  data, ota,     0x00e000, 0x002000,
+app,      app,  ota_0,   0x010000, 0x250000,
+flashApp, app,  ota_1,   0x260000, 0x0A0000,
+spiffs,   data, spiffs,  0x300000, 0x100000,

platformio.ini

@@ -2,7 +2,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = tbeam
+;default_envs = tbeam
+;default_envs = pico
+;default_envs = tbeam-s3-core
 ;default_envs = tbeam0.7
 ;default_envs = heltec-v1
 ;default_envs = heltec-v2.0
@@ -21,8 +23,11 @@ default_envs = tbeam
 ;default_envs = meshtastic-diy-v1
 ;default_envs = meshtastic-diy-v1.1
 ;default_envs = m5stack-coreink
+;default_envs = rak4631
 
-extra_configs = variants/*/platformio.ini
+extra_configs =
+  arch/*/*.ini
+  variants/*/platformio.ini
 
 [env]
 extra_scripts = bin/platformio-custom.py 
@@ -43,17 +48,18 @@ monitor_speed = 115200
 lib_deps =
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#53580644255b48ebb7a737343c6b4e71c7e11cf2 ; ESP8266_SSD1306 
   mathertel/OneButton@^2.0.3 ; OneButton library for non-blocking button debounce
-  1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
-  https://github.com/meshtastic/arduino-fsm.git
-  https://github.com/meshtastic/TinyGPSPlus.git
-  Wire ; explicitly needed here because the AXP202 library forgets to add it
-  SPI
+  https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+  https://github.com/meshtastic/TinyGPSPlus.git#2f0d0528d737000043e949f4c3bdfb623cf0b902
   https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   nanopb/Nanopb@^0.4.6
+  erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
+check_flags =
+  --common-flag
+  cppcheck: --enable=--inline-suppr
 
 ; Common settings for conventional (non Portduino) Arduino targets
 [arduino_base]
@@ -61,16 +67,18 @@ framework = arduino
 lib_deps =
   ${env.lib_deps}
   ; Portduino is using meshtastic fork for now
-  https://github.com/jgromes/RadioLib.git
+  jgromes/RadioLib@5.4.1
+  https://github.com/caveman99/SparkFun_ATECCX08a_Arduino_Library.git#008e7f9d40bad66b2f7a0074aaac05b7c424339d
 
 build_flags = ${env.build_flags} -Os 
+  -DRADIOLIB_SPI_PARANOID=0
 # -DRADIOLIB_GODMODE
-build_src_filter = ${env.build_src_filter} -<portduino/>
+build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT 
 [networking_base]
 lib_deps =
-  PubSubClient
+  knolleary/PubSubClient@^2.8
   meshtastic/json11@^1.0.2
 
 ; Common libs for environmental measurements in telemetry module 
@@ -78,90 +86,12 @@ lib_deps =
 [environmental_base]
 lib_deps =
   adafruit/Adafruit BusIO@^1.11.4
-  adafruit/DHT sensor library@^1.4.1
   adafruit/Adafruit Unified Sensor@^1.1.4
-  paulstoffregen/OneWire@^2.3.5
-  robtillaart/DS18B20@^0.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.6
   adafruit/Adafruit BME280 Library@^2.2.2
   adafruit/Adafruit BME680 Library@^2.0.1
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
-; Common settings for ESP targes, mixin with extends = esp32_base
-[esp32_base]
-extends = arduino_base
-platform = espressif32@3.5.0
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<nrf52/>
-upload_speed = 115200
-debug_init_break = tbreak setup
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-# -DUSE_NEW_ESP32_BLUETOOTH will enable the new NimBLE C++ api
-build_flags =
-  ${arduino_base.build_flags} -Wall -Wextra -Isrc/esp32 -Isrc/esp32-mfix-esp32-psram-cache-issue -lnimble -std=c++11 
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial -DUSE_NEW_ESP32_BLUETOOTH
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git
-  h2zero/NimBLE-Arduino@1.3.7
-  arduino-libraries/NTPClient@^3.1.0
-  lorol/LittleFS_esp32@^1.0.6
-  https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-platform_packages =
-    framework-arduinoespressif32@https://github.com/meshtastic/arduino-esp32.git#4cde0f5d412d2695184f32e8a47e9bea57b45276
-
-; leave this commented out to avoid breaking Windows
-;upload_port = /dev/ttyUSB0
-;monitor_port = /dev/ttyUSB0
-
-; Please don't delete these lines. JM uses them.
-;upload_port = /dev/cu.SLAB_USBtoUART
-;monitor_port = /dev/cu.SLAB_USBtoUART
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
-
-[nrf52_base]
-; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-; platform = nordicnrf52 ;pending https://github.com/platformio/builder-framework-arduino-nrf5/pull/7
-platform = https://github.com/meshtastic/platform-nordicnrf52.git#merge
-
-extends = arduino_base
-build_type = debug ; I'm debugging with ICE a lot now
-; note: liboberon provides the AES256 implementation for NRF52 (though not using the hardware acceleration of the NRF52840 - FIXME)
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/nrf52
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mqtt/>
-lib_ignore =
-  BluetoothOTA
-
-[nrf52840_base]
-extends = nrf52_base
-build_flags = ${nrf52_base.build_flags} 
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto.git
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:nrf52840dk]
-extends = nrf52840_base
-board = nrf52840_dk
-
-; Note: By default no lora device is created for this build - it uses a simulated interface
-[env:feather_nrf52832]
-extends = nrf52_base
-board = adafruit_feather_nrf52832
+  adafruit/Adafruit SHTC3 Library@^1.0.0
+  adafruit/Adafruit LPS2X@^2.0.4

src/BluetoothCommon.cpp

@@ -7,7 +7,7 @@ const uint8_t MESH_SERVICE_UUID_16[16u] = {0xfd, 0xea, 0x73, 0xe2, 0xca, 0x5d, 0
                                            0x1f, 0x46, 0xa8, 0x15, 0x18, 0xb2, 0xa1, 0x6b};
 const uint8_t TORADIO_UUID_16[16u] = {0xe7, 0x01, 0x44, 0x12, 0x66, 0x78, 0xdd, 0xa1,
                                       0xad, 0x4d, 0x9e, 0x12, 0xd2, 0x76, 0x5c, 0xf7};
-const uint8_t FROMRADIO_UUID_16[16u] = {0xd5, 0x54, 0xe4, 0xc5, 0x25, 0xc5, 0x31, 0xa5,
-                                        0x55, 0x4a, 0x02, 0xee, 0xc2, 0xbc, 0xa2, 0x8b};
+const uint8_t FROMRADIO_UUID_16[16u] = {0x02, 0x00, 0x12, 0xac, 0x42, 0x02, 0x78, 0xb8,
+                                        0xed, 0x11, 0x93, 0x49, 0x9e, 0xe6, 0x55, 0x2c};
 const uint8_t FROMNUM_UUID_16[16u] = {0x53, 0x44, 0xe3, 0x47, 0x75, 0xaa, 0x70, 0xa6,
                                       0x66, 0x4f, 0x00, 0xa8, 0x8c, 0xa1, 0x9d, 0xed};

src/BluetoothCommon.h

@@ -9,7 +9,7 @@
 #define MESH_SERVICE_UUID "6ba1b218-15a8-461f-9fa8-5dcae273eafd"
 
 #define TORADIO_UUID "f75c76d2-129e-4dad-a1dd-7866124401e7"
-#define FROMRADIO_UUID "8ba2bcc2-ee02-4a55-a531-c525c5e454d5"
+#define FROMRADIO_UUID "2c55e69e-4993-11ed-b878-0242ac120002"
 #define FROMNUM_UUID "ed9da18c-a800-4f66-a670-aa7547e34453"
 
 // NRF52 wants these constants as byte arrays

src/ButtonThread.h

@@ -7,10 +7,6 @@
 #include "power.h"
 #include <OneButton.h>
 
-#ifndef NO_ESP32
-#include "nimble/BluetoothUtil.h"
-#endif
-
 namespace concurrency
 {
 /**
@@ -127,25 +123,32 @@ class ButtonThread : public concurrency::OSThread
     static void userButtonPressedLong()
     {
         // DEBUG_MSG("Long press!\n");
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
         screen->adjustBrightness();
 #endif
         // If user button is held down for 5 seconds, shutdown the device.
         if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
-#ifdef TBEAM_V10
-            if (axp192_found == true) {
+#ifdef HAS_PMU
+            if (pmu_found == true) {
                 setLed(false);
                 power->shutdown();
             }
-#elif NRF52_SERIES
+#elif defined(ARCH_NRF52)
             // Do actual shutdown when button released, otherwise the button release
             // may wake the board immediatedly.
             if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
                 screen->startShutdownScreen();
                 DEBUG_MSG("Shutdown from long press");
                 playBeep();
+#ifdef PIN_LED1
                 ledOff(PIN_LED1);
+#endif
+#ifdef PIN_LED2        
                 ledOff(PIN_LED2);
+#endif
+#ifdef PIN_LED3        
+                ledOff(PIN_LED3);
+#endif
                 shutdown_on_long_stop = true;
             }
 #endif
@@ -156,19 +159,19 @@ class ButtonThread : public concurrency::OSThread
 
     static void userButtonDoublePressed()
     {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         disablePin();
-#elif defined(HAS_EINK)
+#elif defined(USE_EINK)
         digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
 #endif
     }
 
     static void userButtonMultiPressed()
     {
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
         clearNVS();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
         clearBonds();
 #endif
     }

src/DebugConfiguration.h

@@ -17,29 +17,6 @@
 
 #define DEBUG_PORT (*console) // Serial debug port
 
-// What platforms should use SEGGER?
-#ifdef NRF52_SERIES
-
-// Always include the SEGGER code on NRF52 - because useful for debugging
-#include "SEGGER_RTT.h"
-
-// The channel we send stdout data to
-#define SEGGER_STDOUT_CH 0
-
-// Debug printing to segger console
-#define SEGGER_MSG(...) SEGGER_RTT_printf(SEGGER_STDOUT_CH, __VA_ARGS__)
-
-// If we are not on a NRF52840 (which has built in USB-ACM serial support) and we don't have serial pins hooked up, then we MUST
-// use SEGGER for debug output
-#if !defined(PIN_SERIAL_RX) && !defined(NRF52840_XXAA)
-// No serial ports on this board - ONLY use segger in memory console
-#define USE_SEGGER
-#endif
-
-#else
-#define SERIAL0_RX_GPIO 3 // Always GPIO3 on ESP32
-#endif
-
 #ifdef USE_SEGGER
 #define DEBUG_MSG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else

src/FSCommon.cpp

@@ -1,10 +1,58 @@
 #include "configuration.h"
 #include "FSCommon.h"
 
-void listDir(const char * dirname, uint8_t levels)
+
+bool copyFile(const char* from, const char* to)
 {
 #ifdef FSCom
-    File root = FSCom.open(dirname);
+    unsigned char cbuffer[16];
+   
+    File f1 = FSCom.open(from, FILE_O_READ);
+    if (!f1){
+        DEBUG_MSG("Failed to open source file %s\n", from);
+        return false;
+    }
+
+    File f2 = FSCom.open(to, FILE_O_WRITE);
+    if (!f2) {
+        DEBUG_MSG("Failed to open destination file %s\n", to);
+        return false;
+    }
+   
+    while (f1.available() > 0) {
+        byte i = f1.read(cbuffer, 16);
+        f2.write(cbuffer, i);
+    }
+   
+    f2.close();
+    f1.close();
+    return true;
+#endif
+}
+
+bool renameFile(const char* pathFrom, const char* pathTo)
+{
+#ifdef FSCom
+#ifdef ARCH_ESP32
+    // rename was fixed for ESP32 IDF LittleFS in April
+    return FSCom.rename(pathFrom, pathTo);
+#else
+    if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom) ) {
+        return true;
+    } else{
+        return false;
+    }
+#endif
+#endif
+}
+
+void listDir(const char * dirname, uint8_t levels, boolean del = false)
+{
+#ifdef FSCom
+#if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
+    char buffer[255];
+#endif
+    File root = FSCom.open(dirname, FILE_O_READ);
     if(!root){
         return;
     }
@@ -16,55 +64,92 @@ void listDir(const char * dirname, uint8_t levels)
     while(file){
         if(file.isDirectory() && !String(file.name()).endsWith(".")) {
             if(levels){
-                listDir(file.name(), levels -1);
+#ifdef ARCH_ESP32
+                listDir(file.path(), levels -1, del);
+                if(del) { 
+                    DEBUG_MSG("Removing %s\n", file.path());
+                    strcpy(buffer, file.path());
+                    file.close();
+                    FSCom.rmdir(buffer);
+                } else {
+                    file.close();
+                }
+#elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
+                listDir(file.name(), levels -1, del);
+                if(del) { 
+                    DEBUG_MSG("Removing %s\n", file.name());
+                    strcpy(buffer, file.name());
+                    file.close();
+                    FSCom.rmdir(buffer);
+                } else {
+                    file.close();
+                }                
+#else
+                listDir(file.name(), levels -1, del);
+                file.close();
+#endif
             }
         } else {
-            DEBUG_MSG("  %s (%i Bytes)\n", file.name(), file.size());
+#ifdef ARCH_ESP32
+            if(del) {
+                DEBUG_MSG("Deleting %s\n", file.path());
+                strcpy(buffer, file.path());
+                file.close();
+                FSCom.remove(buffer);
+            } else {
+            DEBUG_MSG(" %s (%i Bytes)\n", file.path(), file.size());
+                file.close();
+            }
+#elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
+            if(del) {
+                DEBUG_MSG("Deleting %s\n", file.name());
+                strcpy(buffer, file.name());
+                file.close();
+                FSCom.remove(buffer);
+            } else {
+                DEBUG_MSG(" %s (%i Bytes)\n", file.name(), file.size());
+                file.close();
+            }
+#else
+            DEBUG_MSG(" %s (%i Bytes)\n", file.name(), file.size());
+            file.close();
+#endif            
         }
-        file.close();
         file = root.openNextFile();
     }
-    file.close();
+#ifdef ARCH_ESP32    
+    if(del) { 
+        DEBUG_MSG("Removing %s\n", root.path());
+        strcpy(buffer, root.path());
+        root.close();
+        FSCom.rmdir(buffer);
+    } else {
+        root.close();
+    }
+#elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
+    if(del) { 
+        DEBUG_MSG("Removing %s\n", root.name());
+        strcpy(buffer, root.name());
+        root.close();
+        FSCom.rmdir(buffer);
+    } else {
+        root.close();
+    }
+#else
+    root.close();
+#endif
 #endif
 }
 
 void rmDir(const char * dirname)
 {
 #ifdef FSCom
-    File file = FSCom.open(dirname);
-    if(!file){
-        return;
-    }
-    if(!file.isDirectory()){
-        file.close();
-        FSCom.remove(file.name());
-      //  DEBUG_MSG("Remove FILE  %s\n", file.name());
-        return;
-    }
-
-    file.rewindDirectory();
-    while (true) {
-        File entry = file.openNextFile();
-        if (!entry) {
-          break;
-        }
-        char dirpath[100];   // array to hold the result.
-        strcpy(dirpath, dirname); // copy string one into the result.
-        strcat(dirpath,"/"); // append string two to the result.
-        strcat(dirpath,entry.name()); // append string two to the result.
-        if(entry.isDirectory() && !String(entry.name()).endsWith(".")) {
-            entry.close();
-         //   DEBUG_MSG("Descend DIR  %s\n", dirpath);
-            rmDir(dirpath);
-        } else {
-            entry.close();
-         //   DEBUG_MSG("Remove FILE  %s\n", entry.name());
-            FSCom.remove(entry.name());
-        }
-    }
-    FSCom.rmdir(dirname);
-   // DEBUG_MSG("Remove DIR  %s\n", dirname);
-    file.close();
+#if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
+    listDir(dirname, 10, true);
+#elif defined(ARCH_NRF52)
+    // nRF52 implementation of LittleFS has a recursive delete function
+    FSCom.rmdir_r(dirname);
+#endif
 #endif
 }
 
@@ -76,8 +161,11 @@ void fsInit()
         DEBUG_MSG("ERROR filesystem mount Failed. Formatting...\n");
         assert(0); // FIXME - report failure to phone
     }
-
+#ifdef ARCH_ESP32
+    DEBUG_MSG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
+#else
     DEBUG_MSG("Filesystem files:\n");
+#endif
     listDir("/", 10);
 #endif
 }

src/FSCommon.h

@@ -4,21 +4,34 @@
 
 // Cross platform filesystem API
 
-#ifdef PORTDUINO
+#if defined(ARCH_PORTDUINO)
 // Portduino version
 #include "PortduinoFS.h"
 #define FSCom PortduinoFS
 #define FSBegin() true
 #define FILE_O_WRITE "w"
 #define FILE_O_READ "r"
-#elif !defined(NO_ESP32)
+#endif
+
+#if defined(ARCH_RP2040)
+// RP2040
+#include "LittleFS.h"
+#define FSCom LittleFS
+#define FSBegin() FSCom.begin()
+#define FILE_O_WRITE "w"
+#define FILE_O_READ "r"
+#endif
+
+#if defined(ARCH_ESP32)
 // ESP32 version
-#include "LITTLEFS.h"
-#define FSCom LITTLEFS
+#include "LittleFS.h"
+#define FSCom LittleFS
 #define FSBegin() FSCom.begin(true)
 #define FILE_O_WRITE "w"
 #define FILE_O_READ "r"
-#else
+#endif
+
+#if defined(ARCH_NRF52)
 // NRF52 version
 #include "InternalFileSystem.h"
 #define FSCom InternalFS
@@ -27,5 +40,7 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
-void listDir(const char * dirname, uint8_t levels);
+bool copyFile(const char* from, const char* to);
+bool renameFile(const char* pathFrom, const char* pathTo);
+void listDir(const char * dirname, uint8_t levels, boolean del);
 void rmDir(const char * dirname);

src/GPSStatus.h

@@ -25,21 +25,21 @@ class GPSStatus : public Status
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
-    // proposed for deprecation
-    GPSStatus(bool hasLock, bool isConnected, int32_t latitude, int32_t longitude, int32_t altitude, uint32_t dop,
-              uint32_t heading, uint32_t numSatellites)
-        : Status()
-    {
-        this->hasLock = hasLock;
-        this->isConnected = isConnected;
+    // // proposed for deprecation
+    // GPSStatus(bool hasLock, bool isConnected, int32_t latitude, int32_t longitude, int32_t altitude, uint32_t dop,
+    //           uint32_t heading, uint32_t numSatellites)
+    //     : Status()
+    // {
+    //     this->hasLock = hasLock;
+    //     this->isConnected = isConnected;
 
-        this->p.latitude_i = latitude;
-        this->p.longitude_i = longitude;
-        this->p.altitude = altitude;
-        this->p.PDOP = dop;
-        this->p.ground_track = heading;
-        this->p.sats_in_view = numSatellites;
-    }
+    //     this->p.latitude_i = latitude;
+    //     this->p.longitude_i = longitude;
+    //     this->p.altitude = altitude;
+    //     this->p.PDOP = dop;
+    //     this->p.ground_track = heading;
+    //     this->p.sats_in_view = numSatellites;
+    // }
 
     // preferred method
     GPSStatus(bool hasLock, bool isConnected, const Position &pos) : Status()
@@ -114,6 +114,7 @@ class GPSStatus : public Status
                 newStatus->p.latitude_i != p.latitude_i || newStatus->p.longitude_i != p.longitude_i ||
                 newStatus->p.altitude != p.altitude || newStatus->p.altitude_hae != p.altitude_hae ||
                 newStatus->p.PDOP != p.PDOP || newStatus->p.ground_track != p.ground_track ||
+                newStatus->p.ground_speed != p.ground_speed ||
                 newStatus->p.sats_in_view != p.sats_in_view);
     }
 
@@ -122,7 +123,7 @@ class GPSStatus : public Status
         // Only update the status if values have actually changed
         bool isDirty = matches(newStatus);
 
-        if (isDirty && p.pos_timestamp && (newStatus->p.pos_timestamp == p.pos_timestamp)) {
+        if (isDirty && p.timestamp && (newStatus->p.timestamp == p.timestamp)) {
             // We can NEVER be in two locations at the same time! (also PR #886)
             DEBUG_MSG("BUG!! positional timestamp unchanged from prev solution\n");
         }
@@ -136,9 +137,9 @@ class GPSStatus : public Status
         if (isDirty) {
             if (hasLock) {
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
-                DEBUG_MSG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, sats=%d\n", p.pos_timestamp,
+                DEBUG_MSG("New GPS pos@%x:3 lat=%f, lon=%f, alt=%d, pdop=%.2f, track=%.2f, speed=%.2f, sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
-                          p.sats_in_view);
+                          p.ground_speed * 1e-2, p.sats_in_view);
             } else
                 DEBUG_MSG("No GPS lock\n");
             onNewStatus.notifyObservers(this);

src/OSTimer.cpp

@@ -15,7 +15,7 @@ bool scheduleOSCallback(PendableFunction callback, void *param1, uint32_t param2
     return xTimerPendFunctionCall(callback, param1, param2, pdMS_TO_TICKS(delayMsec));
 } */
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
 // Super skanky quick hack to use hardware timers of the ESP32
 static hw_timer_t *timer;

src/Power.cpp

@@ -7,12 +7,11 @@
 #include "utils.h"
 #include "buzz/buzz.h"
 
-#ifdef TBEAM_V10
-// FIXME. nasty hack cleanup how we load axp192
-#undef AXP192_SLAVE_ADDRESS
-#include "axp20x.h"
-
-AXP20X_Class axp;
+#ifdef HAS_PMU
+#include "XPowersLibInterface.hpp"
+#include "XPowersAXP2101.tpp"
+#include "XPowersAXP192.tpp"
+XPowersLibInterface *PMU = NULL;
 #else
 // Copy of the base class defined in axp20x.h.
 // I'd rather not inlude axp20x.h as it brings Wire dependency.
@@ -22,20 +21,20 @@ class HasBatteryLevel
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
      */
-    virtual int getBattPercentage() { return -1; }
+    virtual int getBatteryPercent() { return -1; }
 
     /**
      * The raw voltage of the battery or NAN if unknown
      */
-    virtual float getBattVoltage() { return NAN; }
+    virtual uint16_t getBattVoltage() { return 0; }
 
     /**
      * return true if there is a battery installed in this unit
      */
     virtual bool isBatteryConnect() { return false; }
 
-    virtual bool isVBUSPlug() { return false; }
-    virtual bool isChargeing() { return false; }
+    virtual bool isVbusIn() { return false; }
+    virtual bool isCharging() { return false; }
 };
 #endif
 
@@ -46,7 +45,7 @@ Power *power;
 using namespace meshtastic;
 
 #ifndef AREF_VOLTAGE
-#if defined(NRF52_SERIES)
+#if defined(ARCH_NRF52)
 /*
  * Internal Reference is +/-0.6V, with an adjustable gain of 1/6, 1/5, 1/4,
  * 1/3, 1/2 or 1, meaning 3.6, 3.0, 2.4, 1.8, 1.2 or 0.6V for the ADC levels.
@@ -77,14 +76,14 @@ class AnalogBatteryLevel : public HasBatteryLevel
      *
      * FIXME - use a lipo lookup table, the current % full is super wrong
      */
-    virtual int getBattPercentage() override
+    virtual int getBatteryPercent() override
     {
         float v = getBattVoltage();
 
         if (v < noBatVolt)
             return -1; // If voltage is super low assume no battery installed
 
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
         // This does not work on a RAK4631 with battery connected
         if (v > chargingVolt)
             return 0; // While charging we can't report % full on the battery
@@ -96,7 +95,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * The raw voltage of the batteryin millivolts or NAN if unknown
      */
-    virtual float getBattVoltage() override
+    virtual uint16_t getBattVoltage() override
     {
 
 #ifndef ADC_MULTIPLIER
@@ -112,7 +111,18 @@ class AnalogBatteryLevel : public HasBatteryLevel
         const uint32_t min_read_interval = 5000;
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
+
+#ifdef BATTERY_SENSE_SAMPLES
+//Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic environment.
+            uint32_t raw = 0;
+            for(uint32_t i=0; i<BATTERY_SENSE_SAMPLES;i++){
+                raw += analogRead(BATTERY_PIN);
+            }
+            raw = raw/BATTERY_SENSE_SAMPLES;
+#else
             uint32_t raw = analogRead(BATTERY_PIN);
+#endif
+
             float scaled;
 #ifndef VBAT_RAW_TO_SCALED
             scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
@@ -126,29 +136,42 @@ class AnalogBatteryLevel : public HasBatteryLevel
             return last_read_value;
         }
 #else
-        return NAN;
+        return 0;
 #endif
     }
 
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return getBattPercentage() != -1; }
+    virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
-    virtual bool isVBUSPlug() override { return getBattVoltage() > chargingVolt; }
+    virtual bool isVbusIn() override { return getBattVoltage() > chargingVolt; }
 
     /// Assume charging if we have a battery and external power is connected.
     /// we can't be smart enough to say 'full'?
-    virtual bool isChargeing() override { return isBatteryConnect() && isVBUSPlug(); }
+    virtual bool isCharging() override { return isBatteryConnect() && isVbusIn(); }
 
   private:
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
 
+#ifndef BAT_FULLVOLT
+#define BAT_FULLVOLT 4200
+#endif 
+#ifndef BAT_EMPTYVOLT
+#define BAT_EMPTYVOLT 3270
+#endif 
+#ifndef BAT_CHARGINGVOLT
+#define BAT_CHARGINGVOLT 4210
+#endif 
+#ifndef BAT_NOBATVOLT
+#define BAT_NOBATVOLT 2230
+#endif 
+
     /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
-    const float fullVolt = 4200, emptyVolt = 3270, chargingVolt = 4210, noBatVolt = 2230;
+    const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
     float last_read_value = 0.0;
     uint32_t last_read_time_ms = 0;
 };
@@ -169,11 +192,11 @@ bool Power::analogInit()
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // ESP32 needs special analog stuff
     adcAttachPin(BATTERY_PIN);
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
 #ifdef VBAT_AR_INTERNAL
     analogReference(VBAT_AR_INTERNAL);
 #else
@@ -197,7 +220,7 @@ bool Power::analogInit()
 
 bool Power::setup()
 {
-    bool found = axp192Init();
+    bool found = axpChipInit();
 
     if (!found) {
         found = analogInit();
@@ -210,11 +233,15 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-#ifdef TBEAM_V10
+
+
+#ifdef HAS_PMU
     DEBUG_MSG("Shutting down\n");
-    axp.setChgLEDMode(AXP20X_LED_OFF);
-    axp.shutdown();
-#elif NRF52_SERIES
+    if(PMU){
+        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
+        PMU->shutdown();
+    }
+#elif defined(ARCH_NRF52)
     playBeep();
     ledOff(PIN_LED1);
     ledOff(PIN_LED2);
@@ -234,8 +261,8 @@ void Power::readPowerStatus()
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
-            if (batteryLevel->getBattPercentage() >= 0) {
-                batteryChargePercent = batteryLevel->getBattPercentage();
+            if (batteryLevel->getBatteryPercent() >= 0) {
+                batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
                 // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
                 // In that case, we compute an estimate of the charge percent based on maximum and minimum voltages defined in
@@ -248,15 +275,15 @@ void Power::readPowerStatus()
 
         // Notify any status instances that are observing us
         const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVBUSPlug() ? OptTrue : OptFalse,
-                        batteryLevel->isChargeing() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
+                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         DEBUG_MSG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
 
 // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 3 low readings in a row
 // Supect fluctuating voltage on the RAK4631 to force it to deep sleep even if battery is at 85% after only a few days
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
             if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
                 low_voltage_counter++;
@@ -282,41 +309,46 @@ int32_t Power::runOnce()
 {
     readPowerStatus();
 
-#ifdef TBEAM_V10
+#ifdef HAS_PMU
     // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
     // the IRQ status by reading the registers over I2C
-    axp.readIRQ();
+    if(PMU){
 
-    if (axp.isVbusRemoveIRQ()) {
-        DEBUG_MSG("USB unplugged\n");
-        powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-    }
-    if (axp.isVbusPlugInIRQ()) {
-        DEBUG_MSG("USB plugged In\n");
-        powerFSM.trigger(EVENT_POWER_CONNECTED);
-    }
-    /*
-    Other things we could check if we cared...
+        PMU->getIrqStatus();
 
-    if (axp.isChargingIRQ()) {
-        DEBUG_MSG("Battery start charging\n");
+        if(PMU->isVbusRemoveIrq()){
+            DEBUG_MSG("USB unplugged\n");
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+        }
+
+        if (PMU->isVbusInsertIrq()) {
+            DEBUG_MSG("USB plugged In\n");
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+        }
+
+        /*
+        Other things we could check if we cared...
+
+        if (PMU->isBatChagerStartIrq()) {
+            DEBUG_MSG("Battery start charging\n");
+        }
+        if (PMU->isBatChagerDoneIrq()) {
+            DEBUG_MSG("Battery fully charged\n");
+        }
+        if (PMU->isBatInsertIrq()) {
+            DEBUG_MSG("Battery inserted\n");
+        }
+        if (PMU->isBatRemoveIrq()) {
+            DEBUG_MSG("Battery removed\n");
+        }
+        if (PMU->isPekeyShortPressIrq()) {
+            DEBUG_MSG("PEK short button press\n");
+        }
+        */
+
+        PMU->clearIrqStatus();
     }
-    if (axp.isChargingDoneIRQ()) {
-        DEBUG_MSG("Battery fully charged\n");
-    }
-    if (axp.isBattPlugInIRQ()) {
-        DEBUG_MSG("Battery inserted\n");
-    }
-    if (axp.isBattRemoveIRQ()) {
-        DEBUG_MSG("Battery removed\n");
-    }
-    if (axp.isPEKShortPressIRQ()) {
-        DEBUG_MSG("PEK short button press\n");
-    }
-    */
-    axp.clearIRQ();
 #endif
-
     // Only read once every 20 seconds once the power status for the app has been initialized
     return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
@@ -329,128 +361,239 @@ int32_t Power::runOnce()
  share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
  30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
  not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+ * 
  */
-bool Power::axp192Init()
+bool Power::axpChipInit()
 {
-#ifdef TBEAM_V10
-    if (axp192_found) {
-        if (!axp.begin(Wire, AXP192_SLAVE_ADDRESS)) {
-            batteryLevel = &axp;
 
-            DEBUG_MSG("AXP192 Begin PASS\n");
+#ifdef HAS_PMU
 
-            // axp.setChgLEDMode(LED_BLINK_4HZ);
-            DEBUG_MSG("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("----------------------------------------\n");
+        TwoWire * w = NULL;
 
-            axp.setPowerOutPut(AXP192_LDO2, AXP202_ON); // LORA radio
-            // axp.setPowerOutPut(AXP192_LDO3, AXP202_ON); // GPS main power - now turned on in setGpsPower
-            axp.setPowerOutPut(AXP192_DCDC2, AXP202_ON);
-            axp.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
-            axp.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
-            axp.setDCDC1Voltage(3300); // for the OLED power
-
-            DEBUG_MSG("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
-            DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
-
-            switch (config.power.charge_current) {
-            case Config_PowerConfig_ChargeCurrent_MAUnset:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA100:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_100MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA190:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_190MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA280:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_280MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA360:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_360MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA450:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA550:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_550MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA630:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_630MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA700:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_700MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA780:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_780MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA880:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_880MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA960:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_960MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA1000:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1000MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA1080:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1080MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA1160:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1160MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA1240:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1240MA);
-                break;
-            case Config_PowerConfig_ChargeCurrent_MA1320:
-                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1320MA);
-                break;
-            }
-
-#if 0
-
-      // Not connected
-      //val = 0xfc;
-      //axp._writeByte(AXP202_VHTF_CHGSET, 1, &val); // Set temperature protection
-
-      //not used
-      //val = 0x46;
-      //axp._writeByte(AXP202_OFF_CTL, 1, &val); // enable bat detection
+    // Use macro to distinguish which wire is used by PMU
+#ifdef PMU_USE_WIRE1
+        w = &Wire1;
+#else
+        w = &Wire;
 #endif
-            axp.debugCharging();
 
-#ifdef PMU_IRQ
-            pinMode(PMU_IRQ, INPUT);
-            attachInterrupt(
-                PMU_IRQ, [] { pmu_irq = true; }, FALLING);
-
-            axp.adc1Enable(AXP202_BATT_CUR_ADC1, 1);
-            // we do not look for AXP202_CHARGING_FINISHED_IRQ & AXP202_CHARGING_IRQ because it occurs repeatedly while there is
-            // no battery also it could cause inadvertent waking from light sleep just because the battery filled
-            // we don't look for AXP202_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
-            // we don't look at AXP202_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
-            axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ, 1);
-
-            axp.clearIRQ();
-#endif
-            readPowerStatus();
+    /**
+     * It is not necessary to specify the wire pin, 
+     * just input the wire, because the wire has been initialized in main.cpp
+     */
+    if (!PMU) {
+        PMU = new XPowersAXP2101(*w);
+        if (!PMU->init()) {
+            DEBUG_MSG("Warning: Failed to find AXP2101 power management\n");
+            delete PMU;
+            PMU = NULL;
         } else {
-            DEBUG_MSG("AXP192 Begin FAIL\n");
+            DEBUG_MSG("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
         }
-    } else {
-        DEBUG_MSG("AXP192 not found\n");
     }
 
-    return axp192_found;
+    if (!PMU) {
+        PMU = new XPowersAXP192(*w);
+        if (!PMU->init()) {
+            DEBUG_MSG("Warning: Failed to find AXP192 power management\n");
+            delete PMU;
+            PMU = NULL;
+        } else {
+            DEBUG_MSG("AXP192 PMU init succeeded, using AXP192 PMU\n");
+        }
+    }
+
+    if (!PMU) {
+                /*
+        * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time. 
+        * In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once, 
+        * if there are multiple devices sharing the bus.
+        * * */
+#ifndef PMU_USE_WIRE1
+        w->begin(I2C_SDA, I2C_SCL);
+#endif
+        return false;
+    }
+
+    batteryLevel = PMU;
+
+    if (PMU->getChipModel() == XPOWERS_AXP192) {
+        
+        // lora radio power channel
+        PMU->setPowerChannelVoltage(XPOWERS_LDO2, 3300);
+        PMU->enablePowerOutput(XPOWERS_LDO2);
+
+
+        // oled module power channel,
+        // disable it will cause abnormal communication between boot and AXP power supply, 
+        // do not turn it off
+        PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
+        // enable oled power
+        PMU->enablePowerOutput(XPOWERS_DCDC1);
+
+
+        // gnss module power channel -  now turned on in setGpsPower
+        PMU->setPowerChannelVoltage(XPOWERS_LDO3, 3300);
+        // PMU->enablePowerOutput(XPOWERS_LDO3);
+
+
+        //protected oled power source
+        PMU->setProtectedChannel(XPOWERS_DCDC1);
+        //protected esp32 power source
+        PMU->setProtectedChannel(XPOWERS_DCDC3);
+
+        //disable not use channel
+        PMU->disablePowerOutput(XPOWERS_DCDC2);
+
+        //disable all axp chip interrupt
+        PMU->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
+
+        // Set constant current charging current
+        PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
+
+    
+    } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
+
+        // t-beam s3 core 
+
+        /**
+         * gnss module power channel 
+         * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during initialization
+         */
+        PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
+        PMU->enablePowerOutput(XPOWERS_ALDO4);
+
+        // lora radio power channel
+        PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
+        PMU->enablePowerOutput(XPOWERS_ALDO3);
+
+        // m.2 interface 
+        PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
+        PMU->enablePowerOutput(XPOWERS_DCDC3);
+
+        /**
+        * ALDO2 cannot be turned off. 
+        * It is a necessary condition for sensor communication. 
+        * It must be turned on to properly access the sensor and screen
+        * It is also responsible for the power supply of PCF8563
+        */
+        PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
+        PMU->enablePowerOutput(XPOWERS_ALDO2);
+
+        // 6-axis , magnetometer ,bme280 , oled screen power channel 
+        PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
+        PMU->enablePowerOutput(XPOWERS_ALDO1);
+
+        // sdcard power channle 
+        PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
+        PMU->enablePowerOutput(XPOWERS_BLDO1);
+        
+        // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
+        // PMU->enablePowerOutput(XPOWERS_DCDC4);
+
+        //not use channel
+        PMU->disablePowerOutput(XPOWERS_DCDC2); //not elicited
+        PMU->disablePowerOutput(XPOWERS_DCDC5); //not elicited
+        PMU->disablePowerOutput(XPOWERS_DLDO1); //Invalid power channel, it does not exist
+        PMU->disablePowerOutput(XPOWERS_DLDO2); //Invalid power channel, it does not exist
+        PMU->disablePowerOutput(XPOWERS_VBACKUP);
+
+        //disable all axp chip interrupt
+        PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
+
+        //Set the constant current charging current of AXP2101, temporarily use 500mA by default
+        PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
+
+    }
+    
+
+    PMU->clearIrqStatus();
+
+    // TBeam1.1 /T-Beam S3-Core has no external TS detection, 
+    // it needs to be disabled, otherwise it will cause abnormal charging
+    PMU->disableTSPinMeasure();
+
+    // PMU->enableSystemVoltageMeasure();
+    PMU->enableVbusVoltageMeasure();
+    PMU->enableBattVoltageMeasure();
+
+    DEBUG_MSG("=======================================================================\n");
+    if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
+        DEBUG_MSG("DC1  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
+        DEBUG_MSG("DC2  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
+        DEBUG_MSG("DC3  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC3)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
+        DEBUG_MSG("DC4  : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_DCDC4)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
+        DEBUG_MSG("LDO2 : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_LDO2)   ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_LDO2));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
+        DEBUG_MSG("LDO3 : %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_LDO3)   ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_LDO3));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
+        DEBUG_MSG("ALDO1: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
+        DEBUG_MSG("ALDO2: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
+        DEBUG_MSG("ALDO3: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO3)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
+        DEBUG_MSG("ALDO4: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_ALDO4)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
+        DEBUG_MSG("BLDO1: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_BLDO1)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
+    }
+    if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
+        DEBUG_MSG("BLDO2: %s   Voltage:%u mV \n",  PMU->isPowerChannelEnable(XPOWERS_BLDO2)  ? "+" : "-",  PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
+    }
+    DEBUG_MSG("=======================================================================\n");
+
+
+    //Set up the charging voltage, AXP2101/AXP192 4.2V gear is the same
+    // XPOWERS_AXP192_CHG_VOL_4V2 = XPOWERS_AXP2101_CHG_VOL_4V2
+    PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
+
+    // Set PMU shutdown voltage at 2.6V to maximize battery utilization
+    PMU->setSysPowerDownVoltage(2600);
+
+
+
+#ifdef PMU_IRQ
+        uint64_t pmuIrqMask = 0;
+
+        if (PMU->getChipModel() == XPOWERS_AXP192) {
+            pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
+        } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
+            pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
+        }
+
+        pinMode(PMU_IRQ, INPUT);
+        attachInterrupt(
+            PMU_IRQ, [] { pmu_irq = true; }, FALLING);
+
+        // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
+        // no battery also it could cause inadvertent waking from light sleep just because the battery filled
+        // we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
+        // we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
+        PMU->enableIRQ(pmuIrqMask);
+
+        PMU->clearIrqStatus();
+#endif /*PMU_IRQ*/
+
+            readPowerStatus();
+
+    pmu_found = true;
+
+    return pmu_found;
+
 #else
     return false;
 #endif

src/PowerFSM.cpp

@@ -12,11 +12,11 @@
 static bool isPowered()
 {
     // Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
-    #if !defined(BATTERY_PIN) && !defined(AXP192_SLAVE_ADDRESS)
+    #if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
         return true;
     #endif
 
-    bool isRouter = (config.device.role == Config_DeviceConfig_Role_Router ? 1 : 0);
+    bool isRouter = (config.device.role == Config_DeviceConfig_Role_ROUTER ? 1 : 0);
 
     // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
     // We assume routers might be powered all the time, but from a low current (solar) source
@@ -34,7 +34,7 @@ static void sdsEnter()
 {
     DEBUG_MSG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(config.power.sds_secs ? config.power.sds_secs : default_sds_secs * 1000LL);
+    doDeepSleep(config.power.sds_secs * 1000);
 }
 
 extern Power *power;
@@ -51,8 +51,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    DEBUG_MSG("lsEnter begin, ls_secs=%u\n",
-              config.power.ls_secs ? config.power.ls_secs : default_ls_secs);
+    DEBUG_MSG("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
@@ -63,10 +62,10 @@ static void lsIdle()
 {
     // DEBUG_MSG("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     // Do we have more sleeping to do?
-    if (secsSlept < config.power.ls_secs ? config.power.ls_secs : default_ls_secs * 1000) {
+    if (secsSlept < config.power.ls_secs) {
         // Briefly come out of sleep long enough to blink the led once every few seconds
         uint32_t sleepTime = 30;
 
@@ -200,8 +199,7 @@ static void onEnter()
 
     uint32_t now = millis();
 
-    if (now - lastPingMs >
-        30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
+    if ((now - lastPingMs) > 30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
         if (displayedNodeNum)
             service.sendNetworkPing(displayedNodeNum, true); // Refresh the currently displayed node
         lastPingMs = now;
@@ -239,10 +237,10 @@ Fsm powerFSM(&stateBOOT);
 
 void PowerFSM_setup()
 {
-    bool isRouter = (config.device.role == Config_DeviceConfig_Role_Router ? 1 : 0);
+    bool isRouter = (config.device.role == Config_DeviceConfig_Role_ROUTER ? 1 : 0);
     bool hasPower = isPowered();
 
-    DEBUG_MSG("PowerFSM init, USB power=%d\n", hasPower);
+    DEBUG_MSG("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
     // wake timer expired or a packet arrived
@@ -251,8 +249,7 @@ void PowerFSM_setup()
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
-    powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_PACKET_FOR_PHONE, NULL,
-                            "Received packet, exiting light sleep");
+    powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Received packet, exiting light sleep");
     powerFSM.add_transition(&stateNB, &stateNB, EVENT_PACKET_FOR_PHONE, NULL, "Received packet, resetting win wake");
 
     // Handle press events - note: we ignore button presses when in API mode
@@ -261,8 +258,7 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
     powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
-    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
-                            "Press"); // Allow button to work while in serial API
+    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress, "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
     powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
@@ -333,45 +329,26 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
     powerFSM.add_transition(&stateON, &stateON, EVENT_FIRMWARE_UPDATE, NULL, "Got firmware update");
 
-    powerFSM.add_timed_transition(&stateON, &stateDARK,
-                                  config.display.screen_on_secs ? config.display.screen_on_secs
-                                                                               : 60 * 1000 * 10,
-                                  NULL, "Screen-on timeout");
+    powerFSM.add_timed_transition(&stateON, &stateDARK, getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL, "Screen-on timeout");
 
     // On most boards we use light-sleep to be our main state, but on NRF52 we just stay in DARK
     State *lowPowerState = &stateLS;
 
-    uint32_t meshSds = 0;
-
-#ifndef NRF52_SERIES
+#ifdef ARCH_ESP32
     // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
     // See: https://github.com/meshtastic/Meshtastic-device/issues/1071
     if (isRouter || config.power.is_power_saving) {
-        powerFSM.add_timed_transition(&stateNB, &stateLS,
-                                      config.power.min_wake_secs ? config.power.min_wake_secs
-                                                                                : default_min_wake_secs * 1000,
-                                      NULL, "Min wake timeout");
-        powerFSM.add_timed_transition(&stateDARK, &stateLS,
-                                      config.power.wait_bluetooth_secs
-                                          ? config.power.wait_bluetooth_secs
-                                          : default_wait_bluetooth_secs * 1000,
-                                      NULL, "Bluetooth timeout");
-        meshSds = config.power.mesh_sds_timeout_secs ? config.power.mesh_sds_timeout_secs
-                                                                    : default_mesh_sds_timeout_secs;
+        powerFSM.add_timed_transition(&stateNB, &stateLS, getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout");
+        powerFSM.add_timed_transition(&stateDARK, &stateLS, getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL, "Bluetooth timeout");
+    } 
 
-    } else {
-
-        meshSds = UINT32_MAX;
-    }
-
-#else
+#elif defined (ARCH_NRF52)
     lowPowerState = &stateDARK;
-    meshSds = UINT32_MAX; // Workaround for now: Don't go into deep sleep on the RAK4631
 #endif
 
-    if (meshSds != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, meshSds * 1000, NULL, "mesh timeout");
+    if (config.power.sds_secs != UINT32_MAX)
+        powerFSM.add_timed_transition(lowPowerState, &stateSDS, config.power.sds_secs * 1000, NULL, "mesh timeout");
 
     powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/RedirectablePrint.cpp

@@ -1,6 +1,7 @@
 #include "configuration.h"
 #include "RedirectablePrint.h"
 #include "RTC.h"
+#include "NodeDB.h"
 #include "concurrency/OSThread.h"
 // #include "wifi/WiFiServerAPI.h"
 #include <assert.h>
@@ -30,7 +31,9 @@ size_t RedirectablePrint::write(uint8_t c)
     // optionally send chars to TCP also
     //WiFiServerPort::debugOut(c);
 
-    dest->write(c);
+    if (!config.has_lora || config.device.serial_enabled)
+        dest->write(c);
+
     return 1; // We always claim one was written, rather than trusting what the
               // serial port said (which could be zero)
 }
@@ -38,19 +41,19 @@ size_t RedirectablePrint::write(uint8_t c)
 size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 {
     va_list copy;
+    static char printBuf[160];
 
     va_copy(copy, arg);
-    int len = vsnprintf(printBuf, printBufLen, format, copy);
+    int len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
     va_end(copy);
-    if (len < 0) {
-        va_end(arg);
-        return 0;
-    };
-    if (len >= (int)printBufLen) {
-        delete[] printBuf;
-        printBufLen *= 2;
-        printBuf = new char[printBufLen];
-        len = vsnprintf(printBuf, printBufLen, format, arg);
+
+    if (len < 0) return 0;
+
+    // If the resulting string is longer than sizeof(printBuf)-1 characters, the remaining characters are still counted for the return value
+
+    if (len > sizeof(printBuf) - 1) {
+        len = sizeof(printBuf) - 1;
+        printBuf[sizeof(printBuf) - 2] = '\n';
     }
 
     len = Print::write(printBuf, len);
@@ -107,4 +110,4 @@ size_t RedirectablePrint::logDebug(const char *format, ...)
     }
 
     return r;
-}
+}

src/RedirectablePrint.h

@@ -12,10 +12,6 @@ class RedirectablePrint : public Print
 {
     Print *dest;
 
-    /// We dynamically grow this scratch buffer if necessary
-    char *printBuf = new char[64];
-    size_t printBufLen = 64;
-
     /// Used to allow multiple logDebug messages to appear on a single log line
     bool isContinuationMessage = false;
 

src/SerialConsole.cpp

@@ -20,6 +20,9 @@ void consolePrintf(const char *format, ...)
     va_start(arg, format);
     console->vprintf(format, arg);
     va_end(arg);
+#ifdef ARCH_ESP32
+    console->flush();
+#endif
 }
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port)
@@ -30,7 +33,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port)
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
     Port.begin(SERIAL_BAUD);
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     time_t timeout = millis();
     while (!Port) {
         if ((millis() - timeout) < 5000) {
@@ -57,10 +60,15 @@ bool SerialConsole::checkIsConnected()
  */
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {
-    // Turn off debug serial printing once the API is activated, because other threads could print and corrupt packets
-    if (!config.device.debug_log_enabled)
-        setDestination(&noopPrint);
-    canWrite = true;
+    // only talk to the API once the configuration has been loaded and we're sure the serial port is not disabled.
+    if (config.has_lora && config.device.serial_enabled) {
+        // Turn off debug serial printing once the API is activated, because other threads could print and corrupt packets
+        if (!config.device.debug_log_enabled)
+            setDestination(&noopPrint);
+        canWrite = true;
 
-    return StreamAPI::handleToRadio(buf, len);
-}
+        return StreamAPI::handleToRadio(buf, len);
+    }else{
+        return false;
+    }
+}

src/buzz/buzz.cpp

@@ -36,6 +36,7 @@ struct ToneDuration {
 #define NOTE_A3 220
 #define NOTE_AS3 233
 #define NOTE_B3 247
+#define NOTE_CS4 277
 
 const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
@@ -65,16 +66,17 @@ void playBeep() { tone(PIN_BUZZER, NOTE_B3, DURATION_1_4); }
 #endif
 
 void playStartMelody() {
-  ToneDuration melody[] = {{NOTE_B3, DURATION_1_4},
-                           {NOTE_B3, DURATION_1_8},
-                           {NOTE_B3, DURATION_1_8}};
+  ToneDuration melody[] = {{NOTE_FS3, DURATION_1_8},
+                           {NOTE_AS3, DURATION_1_8},
+                           {NOTE_CS4, DURATION_1_4}};
   playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
+
 void playShutdownMelody() {
-  ToneDuration melody[] = {{NOTE_B3, DURATION_1_4},
-                           {NOTE_G3, DURATION_1_8},
-                           {NOTE_D3, DURATION_1_8}};
+  ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8},
+                           {NOTE_AS3, DURATION_1_8},
+                           {NOTE_FS3, DURATION_1_4}};
   playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 #endif

src/commands.h

@@ -14,4 +14,5 @@ enum class Cmd {
         STOP_BOOT_SCREEN,
         PRINT,
         START_SHUTDOWN_SCREEN,
+        START_REBOOT_SCREEN,
 };

src/configuration.h

@@ -62,79 +62,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
 #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
 
-#ifdef PORTDUINO
-
-#define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth)
-
-#elif defined(NRF52_SERIES) // All of the NRF52 targets are configured using variant.h, so this section shouldn't need to be
-// board specific
-
-//
-// Standard definitions for NRF52 targets
-//
-
-#define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth)
-
-// We bind to the GPS using variant.h instead for this platform (Serial1)
-
-#define LED_PIN PIN_LED1 // LED1 on nrf52840-DK
-
-// If the variant filed defines as standard button
-#ifdef PIN_BUTTON1
-#define BUTTON_PIN PIN_BUTTON1
+// Nop definition for these attributes that are specific to ESP32
+#ifndef EXT_RAM_ATTR
+    #define EXT_RAM_ATTR
 #endif
-
-#ifdef PIN_BUTTON2
-#define BUTTON_PIN_ALT PIN_BUTTON2
+#ifndef IRAM_ATTR
+    #define IRAM_ATTR
 #endif
-
-#ifdef PIN_BUTTON_TOUCH
-#define BUTTON_PIN_TOUCH PIN_BUTTON_TOUCH
-#endif
-
-#else
-
-//
-// Standard definitions for ESP32 targets
-//
-
-#define HAS_WIFI
-
-#define GPS_SERIAL_NUM 1
-#define GPS_RX_PIN 34
-#ifdef USE_JTAG
-#define GPS_TX_PIN -1
-#else
-#define GPS_TX_PIN 12
-#endif
-
-// -----------------------------------------------------------------------------
-// LoRa SPI
-// -----------------------------------------------------------------------------
-
-// NRF52 boards will define this in variant.h
-#ifndef RF95_SCK
-#define RF95_SCK 5
-#define RF95_MISO 19
-#define RF95_MOSI 27
-#define RF95_NSS 18
-#endif
-
-#endif
-
-#ifndef TTGO_T_ECHO
-#define GPS_UBLOX
-#endif
-
-//
-// Standard definitions for !ESP32 targets
-//
-
-#ifdef NO_ESP32
-// Nop definition for these attributes - not used on NRF52
-#define EXT_RAM_ATTR
-#define IRAM_ATTR
-#define RTC_DATA_ATTR
+#ifndef RTC_DATA_ATTR
+    #define RTC_DATA_ATTR
 #endif
 
 // -----------------------------------------------------------------------------
@@ -145,7 +81,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define DISABLE_NTP
 
 // Disable the welcome screen and allow 
-#define DISABLE_WELCOME_UNSET
+//#define DISABLE_WELCOME_UNSET
 
 // -----------------------------------------------------------------------------
 // OLED & Input
@@ -158,19 +94,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define this if you know you have that controller or your "SSD1306" misbehaves.
 //#define USE_SH1106
 
-// Flip the screen upside down by default as it makes more sense on T-BEAM
-// devices. Comment this out to not rotate screen 180 degrees.
-#define SCREEN_FLIP_VERTICALLY
-
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
 // The m5stack I2C Keyboard (also RAK14004)
 #define CARDKB_ADDR 0x5F
 
-// The older M5 Faces I2C Keyboard
-#define FACESKB_ADDR 0x88
-
 // -----------------------------------------------------------------------------
 // SENSOR
 // -----------------------------------------------------------------------------
@@ -179,6 +108,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define QMC6310_ADDR 0x1C
+#define QMI8658_ADDR 0x6B
+#define SHTC3_ADDR 0x70
+#define LPS22HB_ADDR 0x5C
+#define LPS22HB_ADDR_ALT 0x5D
+
+// -----------------------------------------------------------------------------
+// Security
+// -----------------------------------------------------------------------------
+
+#define ATECC608B_ADDR 0x35
 
 // -----------------------------------------------------------------------------
 // GPS
@@ -190,109 +130,43 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_THREAD_INTERVAL 100
 #endif
 
-#if defined(TBEAM_V10)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TBEAM
-
-#elif defined(TBEAM_V07)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TBEAM0p7
-
-#elif defined(DIY_V1)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_DIY_V1
-
-#elif defined(RAK_11200)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_RAK11200
-
-#elif defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
-
-#ifdef HELTEC_V2_0
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_HELTEC_V2_0
-
-#endif
-
-#ifdef HELTEC_V2_1
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_HELTEC_V2_1
-
-#endif
-
-#elif defined(ARDUINO_HELTEC_WIFI_LORA_32)
-
-#define HW_VENDOR HardwareModel_HELTEC_V1
-
-#elif defined(TLORA_V1)
-
-#define HW_VENDOR HardwareModel_TLORA_V1
-
-#elif defined(TLORA_V2)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V2
-
-#elif defined(TLORA_V1_3)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V1_1p3
-
-#elif defined(TLORA_V2_1_16)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_TLORA_V2_1_1p6
-
-#elif defined(GENIEBLOCKS)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_GENIEBLOCKS
-
-#elif defined(PRIVATE_HW)
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_PRIVATE_HW
-
-#endif
-
-#ifdef ARDUINO_NRF52840_PCA10056
-
-// This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR HardwareModel_NRF52840DK
-
-// This board uses 0 to be mean LED on
-#undef LED_INVERTED
-#define LED_INVERTED 1
-
-#elif defined(ARDUINO_NRF52840_PPR)
-
-#define HW_VENDOR HardwareModel_PPR
-
-#elif defined(RAK4630)
-
-#define HW_VENDOR HardwareModel_RAK4631
-
-#elif defined(TTGO_T_ECHO)
-
-#define HW_VENDOR HardwareModel_T_ECHO
-
-#elif defined(NANO_G1)
-
-#define HW_VENDOR HardwareModel_NANO_G1
-
-#elif defined(NORDIC_PCA10059)
-
-#define HW_VENDOR HardwareModel_NRF52840_PCA10059
-
-#elif defined(M5STACK)
-
-#define HW_VENDOR HardwareModel_M5STACK
-
-#elif NRF52_SERIES
-
-#define HW_VENDOR HardwareModel_NRF52_UNKNOWN
-
-#elif PORTDUINO
-
-#define HW_VENDOR HardwareModel_PORTDUINO
-
-#endif
-
+/* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
+
+/* Step #2: follow with defines common to the architecture; 
+   also enable HAS_ option not specifically disabled by variant.h */
+#include "architecture.h"
+
+/* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
+
+#ifndef HAS_WIFI
+    #define HAS_WIFI 0
+#endif
+#ifndef HAS_SCREEN
+    #define HAS_SCREEN 0
+#endif
+#ifndef HAS_WIRE
+    #define HAS_WIRE 0
+#endif
+#ifndef HAS_GPS
+    #define HAS_GPS 0
+#endif
+#ifndef HAS_BUTTON
+    #define HAS_BUTTON 0
+#endif
+#ifndef HAS_TELEMETRY
+    #define HAS_TELEMETRY 0
+#endif
+#ifndef HAS_RADIO
+    #define HAS_RADIO 0
+#endif
+#ifndef HAS_RTC
+    #define HAS_RTC 0
+#endif
+
 #include "RF95Configuration.h"
 #include "DebugConfiguration.h"
+
+#ifndef HW_VENDOR
+    #error HW_VENDOR must be defined
+#endif

src/cubecell/FS.h

@@ -1 +0,0 @@
-// Placeholder FIXME

src/detect/i2cScan.h

@@ -3,7 +3,47 @@
 #include <Wire.h>
 #include "mesh/generated/telemetry.pb.h"
 
-#ifndef NO_WIRE
+// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
+#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
+#define XPOWERS_AXP192_AXP2101_ADDRESS      0x34
+#endif
+
+#if HAS_WIRE
+
+void printATECCInfo()
+{
+#ifndef ARCH_PORTDUINO
+    atecc.readConfigZone(false);
+
+    DEBUG_MSG("ATECC608B Serial Number: ");
+    for (int i = 0 ; i < 9 ; i++) {
+        DEBUG_MSG("%02x",atecc.serialNumber[i]);
+    }
+
+    DEBUG_MSG(", Rev Number: ");
+    for (int i = 0 ; i < 4 ; i++) {
+        DEBUG_MSG("%02x",atecc.revisionNumber[i]);
+    }
+    DEBUG_MSG("\n");
+
+    DEBUG_MSG("ATECC608B Config %s",atecc.configLockStatus ? "Locked" : "Unlocked");
+    DEBUG_MSG(", Data %s",atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
+    DEBUG_MSG(", Slot 0 %s\n",atecc.slot0LockStatus ? "Locked" : "Unlocked");
+
+    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
+        if (atecc.generatePublicKey() == false) {
+            DEBUG_MSG("ATECC608B Error generating public key\n");
+        } else {
+            DEBUG_MSG("ATECC608B Public Key: ");
+            for (int i = 0 ; i < 64 ; i++) {
+                DEBUG_MSG("%02x",atecc.publicKey64Bytes[i]);
+            }
+            DEBUG_MSG("\n");
+        }
+    }
+#endif
+}
+
 uint16_t getRegisterValue(uint8_t address, uint8_t reg, uint8_t length) {
     uint16_t value = 0x00;
     Wire.beginTransmission(address);
@@ -41,7 +81,7 @@ uint8_t oled_probe(byte addr)
 
         if (r == 0x08 || r == 0x00) {
             o_probe = 2; // SH1106
-        } else if ( r == 0x03 || r == 0x06 || r == 0x07) {
+        } else if ( r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
             o_probe = 1; // SSD1306
         }
         c++;
@@ -74,6 +114,17 @@ void scanI2Cdevice(void)
                     DEBUG_MSG("unknown display found\n");
                 }
             }
+#ifndef ARCH_PORTDUINO
+            if (addr == ATECC608B_ADDR){
+                keystore_found = addr;
+                if (atecc.begin(keystore_found) == true) {
+                    DEBUG_MSG("ATECC608B initialized\n");
+                } else {
+                    DEBUG_MSG("ATECC608B initialization failed\n");
+                }
+                printATECCInfo();
+            }
+#endif
 #ifdef RV3028_RTC
             if (addr == RV3028_RTC){
                 rtc_found = addr;
@@ -102,18 +153,14 @@ void scanI2Cdevice(void)
                     kb_model = 0x00;
                 }
             }
-            if (addr == FACESKB_ADDR) {
-                faceskb_found = addr;
-                DEBUG_MSG("m5 Faces found\n");
-            }
             if (addr == ST7567_ADDRESS) {
                 screen_found = addr;
                 DEBUG_MSG("st7567 display found\n");
             }
-#ifdef AXP192_SLAVE_ADDRESS
-            if (addr == AXP192_SLAVE_ADDRESS) {
-                axp192_found = true;
-                DEBUG_MSG("axp192 PMU found\n");
+#ifdef HAS_PMU
+            if (addr == XPOWERS_AXP192_AXP2101_ADDRESS) {
+                pmu_found = true;
+                DEBUG_MSG("axp192/axp2101 PMU found\n");
             }
 #endif
         if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {
@@ -124,6 +171,9 @@ void scanI2Cdevice(void)
             } else if (registerValue == 0x60) {
                 DEBUG_MSG("BME-280 sensor found at address 0x%x\n", (uint8_t)addr);
                 nodeTelemetrySensorsMap[TelemetrySensorType_BME280] = addr;
+            } else {
+                DEBUG_MSG("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr);
+                nodeTelemetrySensorsMap[TelemetrySensorType_BMP280] = addr;
             }
         }
         if (addr == INA_ADDR || addr == INA_ADDR_ALTERNATE) {
@@ -141,6 +191,22 @@ void scanI2Cdevice(void)
             nodeTelemetrySensorsMap[TelemetrySensorType_MCP9808] = addr;
             DEBUG_MSG("MCP9808 sensor found at address 0x%x\n", (uint8_t)addr);
         }
+        if (addr == QMC6310_ADDR) {
+            DEBUG_MSG("QMC6310 3-Axis magnetic sensor found at address 0x%x\n", (uint8_t)addr);
+            nodeTelemetrySensorsMap[TelemetrySensorType_QMC6310] = addr;
+        }
+        if (addr == QMI8658_ADDR) {
+            DEBUG_MSG("QMI8658 6-Axis inertial measurement sensor found at address 0x%x\n", (uint8_t)addr);
+            nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658] = addr;
+        }
+        if (addr == SHTC3_ADDR) {
+            DEBUG_MSG("SHTC3 sensor found at address 0x%x\n", (uint8_t)addr);
+            nodeTelemetrySensorsMap[TelemetrySensorType_SHTC3] = addr;
+        }
+        if (addr == LPS22HB_ADDR || addr == LPS22HB_ADDR_ALT) {
+            DEBUG_MSG("LPS22HB sensor found at address 0x%x\n", (uint8_t)addr);
+            nodeTelemetrySensorsMap[TelemetrySensorType_LPS22] = addr;
+        }
         } else if (err == 4) {
             DEBUG_MSG("Unknow error at address 0x%x\n", addr);
         }

src/error.h

@@ -8,4 +8,4 @@
 #define RECORD_CRITICALERROR(code) recordCriticalError(code, __LINE__, __FILE__)
 
 /// Record an error that should be reported via analytics
-void recordCriticalError(CriticalErrorCode code = CriticalErrorCode_Unspecified, uint32_t address = 0, const char *filename = NULL);
+void recordCriticalError(CriticalErrorCode code = CriticalErrorCode_UNSPECIFIED, uint32_t address = 0, const char *filename = NULL);

src/esp32/BluetoothSoftwareUpdate.cpp

@@ -1,160 +0,0 @@
-#ifndef USE_NEW_ESP32_BLUETOOTH
-
-#include <Arduino.h>
-
-#include "../concurrency/LockGuard.h"
-#include "../graphics/Screen.h"
-#include "../main.h"
-#include "BluetoothSoftwareUpdate.h"
-#include "NodeDB.h"
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "configuration.h"
-#include "nimble/BluetoothUtil.h"
-
-#include <CRC32.h>
-#include <Update.h>
-
-int16_t updateResultHandle = -1;
-
-static CRC32 crc;
-
-static uint32_t updateExpectedSize, updateActualSize;
-static uint8_t update_result;
-static uint8_t update_region;
-
-static concurrency::Lock *updateLock;
-
-/// Handle writes & reads to total size
-int update_size_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
-{
-    concurrency::LockGuard g(updateLock);
-
-    // Check if there is enough to OTA Update
-    chr_readwrite32le(&updateExpectedSize, ctxt);
-
-    if (ctxt->op == BLE_GATT_ACCESS_OP_WRITE_CHR && updateExpectedSize != 0) {
-        updateActualSize = 0;
-        crc.reset();
-        if (Update.isRunning())
-            Update.abort();
-        bool canBegin = Update.begin(updateExpectedSize, update_region);
-        DEBUG_MSG("Setting region %d update size %u, result %d\n", update_region, updateExpectedSize, canBegin);
-        if (!canBegin) {
-            // Indicate failure by forcing the size to 0 (client will read it back)
-            updateExpectedSize = 0;
-        } else {
-            // This totally breaks abstraction to up up into the app layer for this, but quick hack to make sure we only
-            // talk to one service during the sw update.
-            // DEBUG_MSG("FIXME, crufty shutdown of mesh bluetooth for sw update.");
-            // void stopMeshBluetoothService();
-            // stopMeshBluetoothService();
-
-            screen->startFirmwareUpdateScreen();
-            if (RadioLibInterface::instance)
-                RadioLibInterface::instance->disable(); // FIXME, nasty hack - the RF95 ISR/SPI code on ESP32 can fail while we
-                                                        // are writing flash - shut the radio off during updates
-        }
-    }
-
-    return 0;
-}
-
-#define MAX_BLOCKSIZE_FOR_BT 512
-
-/// Handle writes to data
-int update_data_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
-{
-    concurrency::LockGuard g(updateLock);
-
-    static uint8_t
-        data[MAX_BLOCKSIZE_FOR_BT]; // we temporarily copy here because I'm worried that a fast sender might be able overwrite srcbuf
-
-    uint16_t len = 0;
-
-    auto rc = ble_hs_mbuf_to_flat(ctxt->om, data, sizeof(data), &len);
-    assert(rc == 0);
-
-    // DEBUG_MSG("Writing %u\n", len);
-    crc.update(data, len);
-    Update.write(data, len);
-    updateActualSize += len;
-    powerFSM.trigger(EVENT_FIRMWARE_UPDATE);
-
-    return 0;
-}
-
-/// Handle writes to crc32
-int update_crc32_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
-{
-    concurrency::LockGuard g(updateLock);
-    uint32_t expectedCRC = 0;
-    chr_readwrite32le(&expectedCRC, ctxt);
-
-    uint32_t actualCRC = crc.finalize();
-    DEBUG_MSG("expected CRC %u\n", expectedCRC);
-
-    uint8_t result = 0xff;
-
-    if (updateActualSize != updateExpectedSize) {
-        DEBUG_MSG("Expected %u bytes, but received %u bytes!\n", updateExpectedSize, updateActualSize);
-        result = 0xe1;                   // FIXME, use real error codes
-    } else if (actualCRC != expectedCRC) // Check the CRC before asking the update to happen.
-    {
-        DEBUG_MSG("Invalid CRC! expected=%u, actual=%u\n", expectedCRC, actualCRC);
-        result = 0xe0; // FIXME, use real error codes
-    } else {
-        if (Update.end()) {
-            if (update_region == U_SPIFFS) {
-                DEBUG_MSG("Filesystem updated!\n");
-                nodeDB.saveToDisk(); // Since we just wiped the filesystem, we need to save our current state
-            } else {
-                DEBUG_MSG("Appload updated, rebooting in 5 seconds!\n");
-                rebootAtMsec = millis() + 5000;
-            }
-        } else {
-            DEBUG_MSG("Error Occurred. Error #: %d\n", Update.getError());
-        }
-        result = Update.getError();
-    }
-
-    if (RadioLibInterface::instance)
-        RadioLibInterface::instance->startReceive(); // Resume radio
-
-    assert(updateResultHandle >= 0);
-    update_result = result;
-    DEBUG_MSG("BLE notify update result\n");
-    auto res = ble_gattc_notify(curConnectionHandle, updateResultHandle);
-    assert(res == 0);
-
-    return 0;
-}
-
-int update_result_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
-{
-    return chr_readwrite8(&update_result, sizeof(update_result), ctxt);
-}
-
-int update_region_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg)
-{
-    return chr_readwrite8(&update_region, sizeof(update_region), ctxt);
-}
-
-/*
-See bluetooth-api.md
-
- */
-void reinitUpdateService()
-{
-    if (!updateLock)
-        updateLock = new concurrency::Lock();
-
-    auto res = ble_gatts_count_cfg(gatt_update_svcs); // assigns handles?  see docstring for note about clearing the handle list
-                                                      // before calling SLEEP SUPPORT
-    assert(res == 0);
-
-    res = ble_gatts_add_svcs(gatt_update_svcs);
-    assert(res == 0);
-}
-
-#endif //#ifndef USE_NEW_ESP32_BLUETOOTH

src/esp32/BluetoothSoftwareUpdate.h

@@ -1,29 +0,0 @@
-#ifndef USE_NEW_ESP32_BLUETOOTH
-
-#pragma once
-
-#include "nimble/NimbleDefs.h"
-
-void reinitUpdateService();
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-int update_size_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg);
-int update_data_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg);
-int update_result_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg);
-int update_crc32_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg);
-int update_region_callback(uint16_t conn_handle, uint16_t attr_handle, struct ble_gatt_access_ctxt *ctxt, void *arg);
-
-extern const struct ble_gatt_svc_def gatt_update_svcs[];
-
-extern const ble_uuid128_t update_result_uuid, update_region_uuid;
-
-extern int16_t updateResultHandle;
-
-#ifdef __cplusplus
-};
-#endif
-
-#endif //#ifndef USE_NEW_ESP32_BLUETOOTH

src/esp32/ESP32Bluetooth.cpp

@@ -1,259 +0,0 @@
-#ifdef USE_NEW_ESP32_BLUETOOTH
-
-#include "configuration.h"
-#include "ESP32Bluetooth.h"
-#include "BluetoothCommon.h"
-#include "PowerFSM.h"
-#include "sleep.h"
-#include "main.h"
-#include "mesh/PhoneAPI.h"
-#include "mesh/mesh-pb-constants.h"
-#include <NimBLEDevice.h>
-
-//static BLEService meshBleService = BLEService(BLEUuid(MESH_SERVICE_UUID_16));
-//static BLECharacteristic fromNum = BLECharacteristic(BLEUuid(FROMNUM_UUID_16));
-//static BLECharacteristic fromRadio = BLECharacteristic(BLEUuid(FROMRADIO_UUID_16));
-//static BLECharacteristic toRadio = BLECharacteristic(BLEUuid(TORADIO_UUID_16));
-
-//static BLEDis bledis; // DIS (Device Information Service) helper class instance
-//static BLEBas blebas; // BAS (Battery Service) helper class instance
-//static BLEDfu bledfu; // DFU software update helper service
-
-// This scratch buffer is used for various bluetooth reads/writes - but it is safe because only one bt operation can be in
-// proccess at once
-// static uint8_t trBytes[_max(_max(_max(_max(ToRadio_size, RadioConfig_size), User_size), MyNodeInfo_size), FromRadio_size)];
-static uint8_t fromRadioBytes[FromRadio_size];
-
-NimBLECharacteristic *FromNumCharacteristic;
-NimBLEServer *bleServer;
-
-static bool passkeyShowing;
-static uint32_t doublepressed;
-
-/**
- * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
- */
-void BluetoothPhoneAPI::onNowHasData(uint32_t fromRadioNum)
-{
-    PhoneAPI::onNowHasData(fromRadioNum);
-
-    DEBUG_MSG("BLE notify fromNum\n");
-    //fromNum.notify32(fromRadioNum);
-    
-    uint8_t val[4];
-    put_le32(val, fromRadioNum);
-
-    std::string fromNumByteString(&val[0], &val[0] + sizeof(val));
-
-    FromNumCharacteristic->setValue(fromNumByteString);
-    FromNumCharacteristic->notify();
-}
-
-/// Check the current underlying physical link to see if the client is currently connected
-bool BluetoothPhoneAPI::checkIsConnected() {
-    if (bleServer && bleServer->getConnectedCount() > 0) {
-        return true;
-    }
-    return false;
-}
-
-PhoneAPI *bluetoothPhoneAPI;
-
-class ESP32BluetoothToRadioCallback : public NimBLECharacteristicCallbacks {
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic) {
-        DEBUG_MSG("To Radio onwrite\n");
-        auto valueString = pCharacteristic->getValue();
-        
-        bluetoothPhoneAPI->handleToRadio(reinterpret_cast<const uint8_t*>(&valueString[0]), pCharacteristic->getDataLength());
-    }
-};
-
-class ESP32BluetoothFromRadioCallback : public NimBLECharacteristicCallbacks {
-    virtual void onRead(NimBLECharacteristic *pCharacteristic) {
-        DEBUG_MSG("From Radio onread\n");
-        size_t numBytes = bluetoothPhoneAPI->getFromRadio(fromRadioBytes);
-
-        std::string fromRadioByteString(fromRadioBytes, fromRadioBytes + numBytes);
-
-        pCharacteristic->setValue(fromRadioByteString);
-    }
-};
-
-class ESP32BluetoothServerCallback : public NimBLEServerCallbacks {
-    virtual uint32_t onPassKeyRequest() {
-
-        uint32_t passkey = 0;
-
-        if (doublepressed > 0 && (doublepressed + (30 * 1000)) > millis()) {
-            DEBUG_MSG("User has overridden passkey\n");
-            passkey = defaultBLEPin;
-        } else {
-            DEBUG_MSG("Using random passkey\n");
-            passkey = random(
-                100000, 999999); // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
-        }
-        DEBUG_MSG("*** Enter passkey %d on the peer side ***\n", passkey);
-
-        powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
-        screen->startBluetoothPinScreen(passkey);
-        passkeyShowing = true;
-
-        return passkey;
-    }
-
-    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc) {
-        DEBUG_MSG("BLE authentication complete\n");
-
-        if (passkeyShowing) {
-            passkeyShowing = false;
-            screen->stopBluetoothPinScreen();
-        }
-    }
-};
-
-
-static ESP32BluetoothToRadioCallback *toRadioCallbacks;
-static ESP32BluetoothFromRadioCallback *fromRadioCallbacks;
-
-void ESP32Bluetooth::shutdown()
-{
-    // Shutdown bluetooth for minimum power draw
-    DEBUG_MSG("Disable bluetooth\n");
-    //Bluefruit.Advertising.stop();
-}
-
-void ESP32Bluetooth::setup()
-{
-    // Initialise the Bluefruit module
-    DEBUG_MSG("Initialise the ESP32 bluetooth module\n");
-    //Bluefruit.autoConnLed(false);
-    //Bluefruit.begin();
-
-    // Set the advertised device name (keep it short!)
-    //Bluefruit.setName(getDeviceName());
-
-    // Set the connect/disconnect callback handlers
-    //Bluefruit.Periph.setConnectCallback(connect_callback);
-    //Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
-
-    // Configure and Start the Device Information Service
-    DEBUG_MSG("Configuring the Device Information Service\n");
-    // FIXME, we should set a mfg string based on our HW_VENDOR enum
-    // bledis.setManufacturer(HW_VENDOR);
-    //bledis.setModel(optstr(HW_VERSION));
-    //bledis.setFirmwareRev(optstr(APP_VERSION));
-    //bledis.begin();
-
-    // Start the BLE Battery Service and set it to 100%
-    //DEBUG_MSG("Configuring the Battery Service\n");
-    //blebas.begin();
-    //blebas.write(0); // Unknown battery level for now
-
-    //bledfu.begin(); // Install the DFU helper
-
-    // Setup the Heart Rate Monitor service using
-    // BLEService and BLECharacteristic classes
-    DEBUG_MSG("Configuring the Mesh bluetooth service\n");
-    //setupMeshService();
-
-    // Supposedly debugging works with soft device if you disable advertising
-    //if (isSoftDeviceAllowed) {
-        // Setup the advertising packet(s)
-    //    DEBUG_MSG("Setting up the advertising payload(s)\n");
-    //    startAdv();
-
-    //    DEBUG_MSG("Advertising\n");
-    //}
-
-    //NimBLEDevice::deleteAllBonds();
-
-    NimBLEDevice::init(getDeviceName());
-    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
-
-    NimBLEDevice::setSecurityAuth(true, true, true);
-    NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
-    bleServer = NimBLEDevice::createServer();
-    
-    ESP32BluetoothServerCallback *serverCallbacks = new ESP32BluetoothServerCallback();
-    bleServer->setCallbacks(serverCallbacks);
-
-    NimBLEService *bleService = bleServer->createService(MESH_SERVICE_UUID);
-    //NimBLECharacteristic *pNonSecureCharacteristic = bleService->createCharacteristic("1234", NIMBLE_PROPERTY::READ );
-    //NimBLECharacteristic *pSecureCharacteristic = bleService->createCharacteristic("1235", NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_ENC | NIMBLE_PROPERTY::READ_AUTHEN);
-
-    //define the characteristics that the app is looking for
-    NimBLECharacteristic *ToRadioCharacteristic = bleService->createCharacteristic(TORADIO_UUID, NIMBLE_PROPERTY::WRITE | NIMBLE_PROPERTY::WRITE_AUTHEN | NIMBLE_PROPERTY::WRITE_ENC);
-    NimBLECharacteristic *FromRadioCharacteristic = bleService->createCharacteristic(FROMRADIO_UUID, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
-    FromNumCharacteristic = bleService->createCharacteristic(FROMNUM_UUID, NIMBLE_PROPERTY::NOTIFY | NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::READ_AUTHEN | NIMBLE_PROPERTY::READ_ENC);
-    
-    bluetoothPhoneAPI = new BluetoothPhoneAPI();
-
-    toRadioCallbacks = new ESP32BluetoothToRadioCallback();
-    ToRadioCharacteristic->setCallbacks(toRadioCallbacks);
-
-    fromRadioCallbacks = new ESP32BluetoothFromRadioCallback();
-    FromRadioCharacteristic->setCallbacks(fromRadioCallbacks);
-
-    //uint8_t val[4];
-    //uint32_t zero = 0;
-    //put_le32(val, zero);
-    //std::string fromNumByteString(&val[0], &val[0] + sizeof(val));
-    //FromNumCharacteristic->setValue(fromNumByteString);
-
-    bleService->start();
-    //pNonSecureCharacteristic->setValue("Hello Non Secure BLE");
-    //pSecureCharacteristic->setValue("Hello Secure BLE");
-
-    //FromRadioCharacteristic->setValue("FromRadioString");
-    //ToRadioCharacteristic->setCallbacks()
-
-    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
-    pAdvertising->start();
-
-}
-
-
-/// Given a level between 0-100, update the BLE attribute
-void updateBatteryLevel(uint8_t level)
-{
-    //blebas.write(level);
-}
-
-void ESP32Bluetooth::clearBonds()
-{
-    DEBUG_MSG("Clearing bluetooth bonds!\n");
-    //bond_print_list(BLE_GAP_ROLE_PERIPH);
-    //bond_print_list(BLE_GAP_ROLE_CENTRAL);
-
-    //Bluefruit.Periph.clearBonds();
-    //Bluefruit.Central.clearBonds();
-    
-}
-
-void clearNVS() {
-    NimBLEDevice::deleteAllBonds();
-    ESP.restart();
-}
-
-void disablePin() {
-    DEBUG_MSG("User Override, disabling bluetooth pin requirement\n");
-    // keep track of when it was pressed, so we know it was within X seconds
-
-    // Flash the LED
-    setLed(true);
-    delay(100);
-    setLed(false);
-    delay(100);
-    setLed(true);
-    delay(100);
-    setLed(false);
-    delay(100);
-    setLed(true);
-    delay(100);
-    setLed(false);
-
-    doublepressed = millis();
-}
-
-#endif

src/esp32/ESP32Bluetooth.h

@@ -1,33 +0,0 @@
-#ifdef USE_NEW_ESP32_BLUETOOTH
-
-#pragma once
-
-extern uint16_t fromNumValHandle;
-
-class BluetoothPhoneAPI : public PhoneAPI
-{
-protected: 
-    /**
-     * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
-     */
-    virtual void onNowHasData(uint32_t fromRadioNum) override;
-
-    /// Check the current underlying physical link to see if the client is currently connected
-    virtual bool checkIsConnected() override;
-};
-
-extern PhoneAPI *bluetoothPhoneAPI;
-
-class ESP32Bluetooth
-{
-  public:
-    void setup();
-    void shutdown();
-    void clearBonds();
-};
-
-void setBluetoothEnable(bool on);
-void clearNVS();
-void disablePin();
-
-#endif

src/esp32/NimbleSoftwareUpdate.c

@@ -1,73 +0,0 @@
-#ifndef USE_NEW_ESP32_BLUETOOTH
-#include "BluetoothSoftwareUpdate.h"
-
-// NRF52 wants these constants as byte arrays
-// Generated here https://yupana-engineering.com/online-uuid-to-c-array-converter - but in REVERSE BYTE ORDER
-
-// "cb0b9a0b-a84c-4c0d-bdbb-442e3144ee30"
-const ble_uuid128_t update_service_uuid =
-    BLE_UUID128_INIT(0x30, 0xee, 0x44, 0x31, 0x2e, 0x44, 0xbb, 0xbd, 0x0d, 0x4c, 0x4c, 0xa8, 0x0b, 0x9a, 0x0b, 0xcb);
-
-// "e74dd9c0-a301-4a6f-95a1-f0e1dbea8e1e" write|read
-const ble_uuid128_t update_size_uuid =
-    BLE_UUID128_INIT(0x1e, 0x8e, 0xea, 0xdb, 0xe1, 0xf0, 0xa1, 0x95, 0x6f, 0x4a, 0x01, 0xa3, 0xc0, 0xd9, 0x4d, 0xe7);
-
-// "e272ebac-d463-4b98-bc84-5cc1a39ee517" write
-const ble_uuid128_t update_data_uuid =
-    BLE_UUID128_INIT(0x17, 0xe5, 0x9e, 0xa3, 0xc1, 0x5c, 0x84, 0xbc, 0x98, 0x4b, 0x63, 0xd4, 0xac, 0xeb, 0x72, 0xe2);
-
-// "4826129c-c22a-43a3-b066-ce8f0d5bacc6" write
-const ble_uuid128_t update_crc32_uuid =
-    BLE_UUID128_INIT(0xc6, 0xac, 0x5b, 0x0d, 0x8f, 0xce, 0x66, 0xb0, 0xa3, 0x43, 0x2a, 0xc2, 0x9c, 0x12, 0x26, 0x48);
-
-// "5e134862-7411-4424-ac4a-210937432c77" read|notify
-const ble_uuid128_t update_result_uuid =
-    BLE_UUID128_INIT(0x77, 0x2c, 0x43, 0x37, 0x09, 0x21, 0x4a, 0xac, 0x24, 0x44, 0x11, 0x74, 0x62, 0x48, 0x13, 0x5e);
-
-// "5e134862-7411-4424-ac4a-210937432c67" write
-const ble_uuid128_t update_region_uuid =
-    BLE_UUID128_INIT(0x67, 0x2c, 0x43, 0x37, 0x09, 0x21, 0x4a, 0xac, 0x24, 0x44, 0x11, 0x74, 0x62, 0x48, 0x13, 0x5e);
-
-const struct ble_gatt_svc_def gatt_update_svcs[] = {
-    {
-        /*** Service: Security test. */
-        .type = BLE_GATT_SVC_TYPE_PRIMARY,
-        .uuid = &update_service_uuid.u,
-        .characteristics =
-            (struct ble_gatt_chr_def[]){{
-                                            .uuid = &update_size_uuid.u,
-                                            .access_cb = update_size_callback,
-                                            .flags = BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_WRITE_AUTHEN | BLE_GATT_CHR_F_READ |
-                                                     BLE_GATT_CHR_F_READ_AUTHEN,
-                                        },
-                                        {
-                                            .uuid = &update_data_uuid.u,
-                                            .access_cb = update_data_callback,
-                                            .flags = BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_WRITE_AUTHEN,
-                                        },
-                                        {
-                                            .uuid = &update_crc32_uuid.u,
-                                            .access_cb = update_crc32_callback,
-                                            .flags = BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_WRITE_AUTHEN,
-                                        },
-                                        {
-                                            .uuid = &update_result_uuid.u,
-                                            .access_cb = update_result_callback,
-                                            .flags = BLE_GATT_CHR_F_READ | BLE_GATT_CHR_F_READ_AUTHEN | BLE_GATT_CHR_F_NOTIFY,
-                                        },
-                                        {
-                                            .uuid = &update_region_uuid.u,
-                                            .access_cb = update_region_callback,
-                                            .flags = BLE_GATT_CHR_F_WRITE | BLE_GATT_CHR_F_WRITE_AUTHEN,
-                                        },
-                                        {
-                                            0, /* No more characteristics in this service. */
-                                        }},
-    },
-
-    {
-        0, /* No more services. */
-    },
-};
-
-#endif //#ifndef USE_NEW_ESP32_BLUETOOTH

src/gps/GPS.cpp

@@ -59,98 +59,192 @@ bool GPS::getACK(uint8_t c, uint8_t i) {
   }
 }
 
+/**
+ * @brief  
+ * @note   New method, this method can wait for the specified class and message ID, and return the payload
+ * @param  *buffer: The message buffer, if there is a response payload message, it will be returned through the buffer parameter
+ * @param  size:    size of buffer
+ * @param  requestedClass:  request class constant
+ * @param  requestedID:     request message ID constant
+ * @retval length of payload message
+ */
+int GPS::getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID)
+{
+    uint16_t    ubxFrameCounter = 0;
+    uint32_t    startTime = millis();
+    uint16_t    needRead;
+
+    while (millis() - startTime < 800) {
+        while (_serial_gps->available()) {
+            int c = _serial_gps->read();
+            switch (ubxFrameCounter) {
+            case 0:
+                //ubxFrame 'μ'
+                if (c == 0xB5) {    
+                    ubxFrameCounter++;
+                }
+                break;
+            case 1:
+                //ubxFrame 'b'
+                if (c == 0x62) {
+                    ubxFrameCounter++;
+                } else {
+                    ubxFrameCounter = 0;
+                }
+                break;
+            case 2:
+                //Class
+                if (c == requestedClass) {
+                    ubxFrameCounter++;
+                } else {
+                    ubxFrameCounter = 0;
+                }
+                break;
+            case 3:
+                 //Message ID
+                if (c == requestedID) {
+                    ubxFrameCounter++;
+                } else {
+                    ubxFrameCounter = 0;
+                }
+                break;
+            case 4:
+                //Payload lenght lsb
+                needRead = c;
+                ubxFrameCounter++;
+                break;
+            case 5:
+                //Payload lenght msb
+                needRead |=  (c << 8);
+                ubxFrameCounter++;
+                break;
+            case 6:
+                // Check for buffer overflow
+                if (needRead >= size) {
+                    ubxFrameCounter = 0;
+                    break;
+                }
+                if (_serial_gps->readBytes(buffer, needRead) != needRead) {
+                    ubxFrameCounter = 0;
+                } else {
+                    // return payload lenght
+                    return needRead;
+                }
+                break;
+
+            default:
+                break;
+            }
+        }
+    }
+    return 0;
+}
+
 bool GPS::setupGPS()
 {
     if (_serial_gps && !didSerialInit) {
         didSerialInit = true;
 
+#ifdef ARCH_ESP32
+    // In esp32 framework, setRxBufferSize needs to be initialized before Serial
+    _serial_gps->setRxBufferSize(2048); // the default is 256
+#endif
+
 // ESP32 has a special set of parameters vs other arduino ports
-#if defined(GPS_RX_PIN) && !defined(NO_ESP32)
+#if defined(GPS_RX_PIN) && defined(ARCH_ESP32)
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
-#ifndef NO_ESP32
-        _serial_gps->setRxBufferSize(2048); // the default is 256
-#endif
-#ifdef TTGO_T_ECHO
-        // Switch to 9600 baud, then close and reopen port
-        _serial_gps->end();
-        delay(250);
-        _serial_gps->begin(4800);
-        delay(250);
-        _serial_gps->write("$PCAS01,1*1D\r\n");
-        delay(250);
-        _serial_gps->end();
-        delay(250);
-        _serial_gps->begin(9600);
-        delay(250);
-        // Initialize the L76K Chip, use GPS + GLONASS
-        _serial_gps->write("$PCAS04,5*1C\r\n");
-        delay(250);
-        // only ask for RMC and GGA
-        _serial_gps->write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
-        delay(250);
-        // Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
-        _serial_gps->write("$PCAS11,3*1E\r\n");
-        delay(250);
-#endif
-#ifdef GPS_UBLOX
-        delay(250);
-        // Set the UART port to output NMEA only
-        byte _message_nmea[] = {0xB5, 0x62, 0x06, 0x00, 0x14, 0x00, 0x01, 0x00, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
-                                0x80, 0x25, 0x00, 0x00, 0x07, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0xAF};
-        _serial_gps->write(_message_nmea, sizeof(_message_nmea));
-        if (!getACK(0x06, 0x00)) {
-            DEBUG_MSG("WARNING: Unable to enable NMEA Mode.\n");
-            return true;
-        }  
 
-        // disable GGL
-        byte _message_GGL[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x05, 0x3A};
-        _serial_gps->write(_message_GGL, sizeof(_message_GGL));
-        if (!getACK(0x06, 0x01)) {
-            DEBUG_MSG("WARNING: Unable to disable NMEA GGL.\n");
-            return true;
+        /*
+        * T-Beam-S3-Core will be preset to use gps Probe here, and other boards will not be changed first
+        */
+        gnssModel =  probe();
+
+        if(gnssModel == GNSS_MODEL_MTK){
+            /*
+            * t-beam-s3-core uses the same L76K GNSS module as t-echo. 
+            * Unlike t-echo, L76K uses 9600 baud rate for communication by default.
+            * */
+            // _serial_gps->begin(9600);    //The baud rate of 9600 has been initialized at the beginning of setupGPS, this line is the redundant part
+            // delay(250);
+
+            // Initialize the L76K Chip, use GPS + GLONASS
+            _serial_gps->write("$PCAS04,5*1C\r\n");
+            delay(250);
+            // only ask for RMC and GGA
+            _serial_gps->write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
+            delay(250);
+            // Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
+            _serial_gps->write("$PCAS11,3*1E\r\n");
+            delay(250);
+
+        }else if(gnssModel == GNSS_MODEL_UBLOX){
+
+            /*
+                tips: NMEA Only should not be set here, otherwise initializing Ublox gnss module again after 
+                setting will not output command messages in UART1, resulting in unrecognized module information
+
+                // Set the UART port to output NMEA only
+                byte _message_nmea[] = {0xB5, 0x62, 0x06, 0x00, 0x14, 0x00, 0x01, 0x00, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
+                                        0x80, 0x25, 0x00, 0x00, 0x07, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0xAF};
+                _serial_gps->write(_message_nmea, sizeof(_message_nmea));
+                if (!getACK(0x06, 0x00)) {
+                    DEBUG_MSG("WARNING: Unable to enable NMEA Mode.\n");
+                    return true;
+                }  
+            */
+
+           // ublox-M10S can be compatible with UBLOX traditional protocol, so the following sentence settings are also valid
+
+            // disable GGL
+            byte _message_GGL[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x05, 0x3A};
+            _serial_gps->write(_message_GGL, sizeof(_message_GGL));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to disable NMEA GGL.\n");
+                return true;
+            }
+
+            // disable GSA
+            byte _message_GSA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x02, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x06, 0x41};
+            _serial_gps->write(_message_GSA, sizeof(_message_GSA));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to disable NMEA GSA.\n");
+                return true;
+            }
+
+            // disable GSV
+            byte _message_GSV[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x03, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x07, 0x48};
+            _serial_gps->write(_message_GSV, sizeof(_message_GSV));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to disable NMEA GSV.\n");
+                return true;
+            }
+
+            // disable VTG
+            byte _message_VTG[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x05, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x09, 0x56};
+            _serial_gps->write(_message_VTG, sizeof(_message_VTG));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to disable NMEA VTG.\n");
+                return true;
+            }
+
+            // enable RMC
+            byte _message_RMC[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x09, 0x54};
+            _serial_gps->write(_message_RMC, sizeof(_message_RMC));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to enable NMEA RMC.\n");
+                return true;
+            }
+
+            // enable GGA
+            byte _message_GGA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x05, 0x38};
+            _serial_gps->write(_message_GGA, sizeof(_message_GGA));
+            if (!getACK(0x06, 0x01)) {
+                DEBUG_MSG("WARNING: Unable to enable NMEA GGA.\n");
+            }
         }
-
-        // disable GSA
-        byte _message_GSA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x02, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x06, 0x41};
-        _serial_gps->write(_message_GSA, sizeof(_message_GSA));
-        if (!getACK(0x06, 0x01)) {
-            DEBUG_MSG("WARNING: Unable to disable NMEA GSA.\n");
-            return true;
-        }
-
-        // disable GSV
-        byte _message_GSV[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x03, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x07, 0x48};
-        _serial_gps->write(_message_GSV, sizeof(_message_GSV));
-        if (!getACK(0x06, 0x01)) {
-            DEBUG_MSG("WARNING: Unable to disable NMEA GSV.\n");
-            return true;
-        }
-
-        // disable VTG
-        byte _message_VTG[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x05, 0x01, 0x00, 0x01, 0x01, 0x01, 0x01, 0x09, 0x56};
-        _serial_gps->write(_message_VTG, sizeof(_message_VTG));
-        if (!getACK(0x06, 0x01)) {
-            DEBUG_MSG("WARNING: Unable to disable NMEA VTG.\n");
-            return true;
-        }
-
-        // enable RMC
-        byte _message_RMC[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x09, 0x54};
-        _serial_gps->write(_message_RMC, sizeof(_message_RMC));
-        if (!getACK(0x06, 0x01)) {
-            DEBUG_MSG("WARNING: Unable to enable NMEA RMC.\n");
-            return true;
-        }
-
-        // enable GGA
-        byte _message_GGA[] = {0xB5, 0x62, 0x06, 0x01, 0x08, 0x00, 0xF0, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x05, 0x38};
-        _serial_gps->write(_message_GGA, sizeof(_message_GGA));
-        if (!getACK(0x06, 0x01)) DEBUG_MSG("WARNING: Unable to enable NMEA GGA.\n");
-#endif
     }
 
     return true;
@@ -271,16 +365,7 @@ uint32_t GPS::getWakeTime() const
 
     if (t == UINT32_MAX)
         return t; // already maxint
-
-    if (t == 0)
-        t = (config.device.role == Config_DeviceConfig_Role_Router)
-                ? 5 * 60
-                : 15 * 60; // Allow up to 15 mins for each attempt (probably will be much
-                           // less if we can find sats) or less if a router
-
-    t *= 1000; // msecs
-
-    return t;
+    return t * 1000;
 }
 
 /** Get how long we should sleep between aqusition attempts in msecs
@@ -288,21 +373,15 @@ uint32_t GPS::getWakeTime() const
 uint32_t GPS::getSleepTime() const
 {
     uint32_t t = config.position.gps_update_interval;
-    bool gps_disabled = config.position.gps_disabled;
+    bool gps_enabled = config.position.gps_enabled;
 
-    if (gps_disabled)
+    if (!gps_enabled)
         t = UINT32_MAX; // Sleep forever now
 
     if (t == UINT32_MAX)
         return t; // already maxint
-
-    if (t == 0) // default - unset in preferences
-        t = (config.device.role == Config_DeviceConfig_Role_Router) ? 24 * 60 * 60
-                                                                                   : 2 * 60; // 2 mins or once per day for routers
-
-    t *= 1000;
-
-    return t;
+    
+    return t * 1000;
 }
 
 void GPS::publishUpdate()
@@ -311,7 +390,7 @@ void GPS::publishUpdate()
         shouldPublish = false;
 
         // In debug logs, identify position by @timestamp:stage (stage 2 = publish)
-        DEBUG_MSG("publishing pos@%x:2, hasVal=%d, GPSlock=%d\n", p.pos_timestamp, hasValidLocation, hasLock());
+        DEBUG_MSG("publishing pos@%x:2, hasVal=%d, GPSlock=%d\n", p.timestamp, hasValidLocation, hasLock());
 
         // Notify any status instances that are observing us
         const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), p);
@@ -325,14 +404,14 @@ int32_t GPS::runOnce()
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
-#ifdef GPS_UBLOX        
-        // reset the GPS on next bootup
-        if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
-            DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
-            devicestate.did_gps_reset = false;
-            nodeDB.saveToDisk();
+        if(gnssModel == GNSS_MODEL_UBLOX){
+            // reset the GPS on next bootup
+            if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
+                DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
+                devicestate.did_gps_reset = false;
+                nodeDB.saveDeviceStateToDisk();
+            }
         }
-#endif
     }
 
     // If we are overdue for an update, turn on the GPS and at least publish the current status
@@ -432,17 +511,123 @@ int GPS::prepareDeepSleep(void *unused)
     return 0;
 }
 
-#ifndef NO_GPS
+GnssModel_t GPS::probe()
+{
+    // return immediately if the model is set by the variant.h file
+#ifdef GPS_UBLOX
+    return GNSS_MODEL_UBLOX;
+#elif defined(GPS_L76K)
+    return GNSS_MODEL_MTK;
+#else
+    // we use autodetect, only T-BEAM S3 for now...
+    uint8_t buffer[256];
+    /*
+    * The GNSS module information variable is temporarily placed inside the function body, 
+    * if it needs to be used elsewhere, it can be moved to the outside
+    * */
+    struct uBloxGnssModelInfo info ;
+
+    memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
+
+    // Close all NMEA sentences , Only valid for MTK platform
+    _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
+    delay(20);
+
+    // Get version information
+    _serial_gps->write("$PCAS06,0*1B\r\n");
+    uint32_t startTimeout = millis() + 500;
+    while (millis() < startTimeout) {
+        if (_serial_gps->available()) {
+            String ver = _serial_gps->readStringUntil('\r');
+            // Get module info , If the correct header is returned, 
+            // it can be determined that it is the MTK chip
+            int index = ver.indexOf("$");
+            if(index != -1){
+                ver = ver.substring(index);
+                if (ver.startsWith("$GPTXT,01,01,02")) {
+                    DEBUG_MSG("L76K GNSS init succeeded, using L76K GNSS Module\n");
+                    return GNSS_MODEL_MTK;
+                }
+            }
+        }
+    }
+  
+
+    uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x0E, 0x30};
+    _serial_gps->write(cfg_rate, sizeof(cfg_rate));
+    // Check that the returned response class and message ID are correct
+    if (!getAck(buffer, 256, 0x06, 0x08)) {
+        DEBUG_MSG("Warning: Failed to find UBlox & MTK GNSS Module\n");
+        return GNSS_MODEL_UNKONW;
+    } 
+
+    //  Get Ublox gnss module hardware and software info
+    uint8_t cfg_get_hw[] =  {0xB5, 0x62, 0x0A, 0x04, 0x00, 0x00, 0x0E, 0x34};
+    _serial_gps->write(cfg_get_hw, sizeof(cfg_get_hw));
+
+    uint16_t len = getAck(buffer, 256, 0x0A, 0x04);
+    if (len) {
+
+        uint16_t position = 0;
+        for (int i = 0; i < 30; i++) {
+            info.swVersion[i] = buffer[position];
+            position++;
+        }
+        for (int i = 0; i < 10; i++) {
+            info.hwVersion[i] = buffer[position];
+            position++;
+        }
+
+        while (len >= position + 30) {
+            for (int i = 0; i < 30; i++) {
+                info.extension[info.extensionNo][i] = buffer[position];
+                position++;
+            }
+            info.extensionNo++;
+            if (info.extensionNo > 9)
+                break;
+        }
+
+        DEBUG_MSG("Module Info : \n");
+        DEBUG_MSG("Soft version: %s\n",info.swVersion);
+        DEBUG_MSG("Hard version: %s\n",info.hwVersion);
+        DEBUG_MSG("Extensions:%d\n",info.extensionNo);
+        for (int i = 0; i < info.extensionNo; i++) {
+            DEBUG_MSG("  %s\n",info.extension[i]);
+        }
+
+        memset(buffer,0,sizeof(buffer));
+
+        //tips: extensionNo field is 0 on some 6M GNSS modules
+        for (int i = 0; i < info.extensionNo; ++i) {
+            if (!strncmp(info.extension[i], "OD=", 3)) {
+                strcpy((char *)buffer, &(info.extension[i][3]));
+                DEBUG_MSG("GetModel:%s\n",(char *)buffer);
+            }
+        }
+    }
+
+    if (strlen((char*)buffer)) {
+        DEBUG_MSG("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n" , buffer);
+    }else{
+        DEBUG_MSG("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
+    }
+
+    return GNSS_MODEL_UBLOX;
+#endif
+}
+
+#if HAS_GPS
 #include "NMEAGPS.h"
 #endif
 
 GPS *createGps()
 {
 
-#ifdef NO_GPS
+#if !HAS_GPS
     return nullptr;
 #else
-    if (!config.position.gps_disabled) {
+    if (config.position.gps_enabled) {
 #ifdef GPS_ALTITUDE_HAE
         DEBUG_MSG("Using HAE altitude model\n");
 #else

src/gps/GPS.h

@@ -4,6 +4,20 @@
 #include "Observer.h"
 #include "concurrency/OSThread.h"
 
+
+struct uBloxGnssModelInfo { 
+    char    swVersion[30];
+    char    hwVersion[10];
+    uint8_t extensionNo;
+    char    extension[10][30];
+} ;
+
+typedef enum{
+  GNSS_MODEL_MTK,
+  GNSS_MODEL_UBLOX,
+  GNSS_MODEL_UNKONW,
+}GnssModel_t;
+
 // Generate a string representation of DOP
 const char *getDOPString(uint32_t dop);
 
@@ -146,6 +160,14 @@ class GPS : private concurrency::OSThread
     void publishUpdate();
 
     virtual int32_t runOnce() override;
+
+  // Get GNSS model
+    GnssModel_t probe();
+
+    int getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID);
+
+  protected:
+    GnssModel_t gnssModel = GNSS_MODEL_UNKONW;
 };
 
 // Creates an instance of the GPS class. 

src/gps/NMEAGPS.cpp

@@ -19,14 +19,21 @@ static int32_t toDegInt(RawDegrees d)
 
 bool NMEAGPS::factoryReset()
 {
-#ifdef GPS_UBLOX
+#ifdef PIN_GPS_REINIT
+    //The L76K GNSS on the T-Echo requires the RESET pin to be pulled LOW
+    digitalWrite(PIN_GPS_REINIT, 0);
+    pinMode(PIN_GPS_REINIT, OUTPUT);
+    delay(150); //The L76K datasheet calls for at least 100MS delay
+    digitalWrite(PIN_GPS_REINIT, 1);
+#endif  
+
+    // send the UBLOX Factory Reset Command regardless of detect state, something is very wrong, just assume it's UBLOX.
     // Factory Reset
     byte _message_reset[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF,
         0xFB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
         0xFF, 0xFF, 0x00, 0x00, 0x17, 0x2B, 0x7E};
     _serial_gps->write(_message_reset,sizeof(_message_reset));
     delay(1000);
-#endif
     return true;
 }
 
@@ -155,7 +162,7 @@ bool NMEAGPS::lookForLocation()
         return false;
     }
 
-    p.location_source = Position_LocSource_LOCSRC_GPS_INTERNAL;
+    p.location_source = Position_LocSource_LOC_INTERNAL;
 
     // Dilution of precision (an accuracy metric) is reported in 10^2 units, so we need to scale down when we use it
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
@@ -176,8 +183,8 @@ bool NMEAGPS::lookForLocation()
     p.latitude_i = toDegInt(loc.lat);
     p.longitude_i = toDegInt(loc.lng);
 
-    p.alt_geoid_sep = reader.geoidHeight.meters();
-    p.altitude_hae = reader.altitude.meters() + p.alt_geoid_sep;
+    p.altitude_geoidal_separation = reader.geoidHeight.meters();
+    p.altitude_hae = reader.altitude.meters() + p.altitude_geoidal_separation;
     p.altitude = reader.altitude.meters();
 
     p.fix_quality = fixQual;
@@ -194,7 +201,7 @@ bool NMEAGPS::lookForLocation()
     t.tm_mon = reader.date.month() - 1;
     t.tm_year = reader.date.year() - 1900;
     t.tm_isdst = false;
-    p.pos_timestamp = mktime(&t);
+    p.timestamp = mktime(&t);
 
     // Nice to have, if available
     if (reader.satellites.isUpdated()) {
@@ -210,13 +217,10 @@ bool NMEAGPS::lookForLocation()
         }
     }
 
-/*
-    // REDUNDANT?
-    // expect gps pos lat=37.520825, lon=-122.309162, alt=158
-    DEBUG_MSG("new NMEA GPS pos lat=%f, lon=%f, alt=%d, dop=%g, heading=%f\n",
-              latitude * 1e-7, longitude * 1e-7, altitude, dop * 1e-2,
-              heading * 1e-5);
-*/
+    if (reader.speed.isUpdated() && reader.speed.isValid()) {
+        p.ground_speed = reader.speed.kmph();
+    }
+
     return true;
 }
 

src/gps/NMEAWPL.cpp

@@ -0,0 +1,76 @@
+#include "NMEAWPL.h"
+
+/* -------------------------------------------
+ *        1       2 3        4 5    6
+ *        |       | |        | |    |
+ * $--WPL,llll.ll,a,yyyyy.yy,a,c--c*hh<CR><LF>
+ *
+ * Field Number:
+ * 1 Latitude
+ * 2 N or S (North or South)
+ * 3 Longitude
+ * 4 E or W (East or West)
+ * 5 Waypoint name
+ * 6 Checksum
+ * -------------------------------------------
+ */
+
+uint printWPL(char *buf, const Position &pos, const char *name)
+{
+    uint len = sprintf(buf, "$GNWPL,%07.2f,%c,%08.2f,%c,%s", pos.latitude_i * 1e-5, pos.latitude_i < 0 ? 'S' : 'N', pos.longitude_i * 1e-5, pos.longitude_i < 0 ? 'W' : 'E', name);
+    uint chk = 0;
+    for (uint i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += sprintf(buf + len, "*%02X\r\n", chk);
+    return len;
+}
+
+/* -------------------------------------------
+ *        1         2       3 4       5 6 7  8   9  10 11 12 13  14   15
+ *        |         |       | |       | | |  |   |   | |   | |   |    |
+ * $--GGA,hhmmss.ss,ddmm.mm,a,ddmm.mm,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx*hh<CR><LF>
+ *
+ * Field Number:
+ *  1 UTC of this position report, hh is hours, mm is minutes, ss.ss is seconds.
+ *  2 Latitude
+ *  3 N or S (North or South)
+ *  4 Longitude
+ *  5 E or W (East or West)
+ *  6 GPS Quality Indicator (non null)
+ *  7 Number of satellites in use, 00 - 12
+ *  8 Horizontal Dilution of precision (meters)
+ *  9 Antenna Altitude above/below mean-sea-level (geoid) (in meters)
+ * 10 Units of antenna altitude, meters
+ * 11 Geoidal separation, the difference between the WGS-84 earth ellipsoid and mean-sea-level (geoid), "-" means mean-sea-level below ellipsoid
+ * 12 Units of geoidal separation, meters
+ * 13 Age of differential GPS data, time in seconds since last SC104 type 1 or 9 update, null field when DGPS is not used
+ * 14 Differential reference station ID, 0000-1023
+ * 15 Checksum
+ * -------------------------------------------
+ */
+
+uint printGGA(char *buf, const Position &pos)
+{
+    uint len = sprintf(buf, "$GNGGA,%06u.%03u,%07.2f,%c,%08.2f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d",
+        pos.time / 1000,
+        pos.time % 1000,
+        pos.latitude_i * 1e-5, pos.latitude_i < 0 ? 'S' : 'N',
+        pos.longitude_i * 1e-5, pos.longitude_i < 0 ? 'W' : 'E',
+        pos.fix_type,
+        pos.sats_in_view,
+        pos.HDOP,
+        pos.altitude,
+        'M',
+        pos.altitude_geoidal_separation,
+        'M',
+        0,
+        0);
+
+    uint chk = 0;
+    for (uint i = 1; i < len; i++) {
+        chk ^= buf[i];
+    }
+    len += sprintf(buf + len, "*%02X\r\n", chk);
+    return len;
+}

src/gps/NMEAWPL.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#include <Arduino.h>
+#include "main.h"
+
+uint printWPL(char *buf, const Position &pos, const char *name);
+uint printGGA(char *buf, const Position &pos);

src/gps/RTC.cpp

@@ -47,8 +47,8 @@ void readFromRTC()
         rtc.begin();
         auto tc = rtc.getDateTime();
         tm t;
-        t.tm_year = tc.year;
-        t.tm_mon = tc.month;
+        t.tm_year = tc.year - 1900;
+        t.tm_mon = tc.month - 1;
         t.tm_mday = tc.day;
         t.tm_hour = tc.hour;
         t.tm_min = tc.minute;
@@ -112,15 +112,15 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
             PCF8563_Class rtc;
             rtc.begin();
             tm *t = localtime(&tv->tv_sec);
-            rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_hour, t->tm_min, t->tm_sec);
+            rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             DEBUG_MSG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
         }
-#elif !defined(NO_ESP32)
+#elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
 #endif
 
         // nrf52 doesn't have a readable RTC (yet - software not written)
-#if defined(PORTDUINO) || !defined(NO_ESP32) || defined(RV3028_RTC) || defined(PCF8563_RTC)
+#ifdef HAS_RTC
         readFromRTC();
 #endif
 

src/gps/RTC.h

@@ -16,7 +16,7 @@ enum RTCQuality {
     RTCQualityFromNet = 2,
 
     /// Our time is based on NTP
-    RTCQualityNTP= 3,
+    RTCQualityNTP = 3,
 
     /// Our time is based on our own GPS
     RTCQualityGPS = 4

src/graphics/EInkDisplay2.cpp

@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#ifdef HAS_EINK
+#ifdef USE_EINK
 #include "main.h"
 #include "EInkDisplay2.h"
 #include "SPILock.h"

src/graphics/Screen.cpp

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
 #include "configuration.h"
-#ifndef NO_SCREEN
+#if HAS_SCREEN
 #include <OLEDDisplay.h>
 
 #include "GPS.h"
@@ -39,11 +39,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "target_specific.h"
 #include "utils.h"
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "esp_task_wdt.h"
 #include "mesh/http/WiFiAPClient.h"
 #endif
 
+#ifdef OLED_RU
+#include "fonts/OLEDDisplayFontsRU.h"
+#endif
+
 using namespace meshtastic; /** @todo remove */
 
 extern bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct);
@@ -53,7 +57,6 @@ namespace graphics
 
 // This means the *visible* area (sh1106 can address 132, but shows 128 for example)
 #define IDLE_FRAMERATE 1 // in fps
-#define COMPASS_DIAM 44
 
 // DEBUG
 #define NUM_EXTRA_FRAMES 3 // text message and debug frame
@@ -64,7 +67,7 @@ namespace graphics
 static FrameCallback normalFrames[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 static uint32_t targetFramerate = IDLE_FRAMERATE;
 static char btPIN[16] = "888888";
-
+    
 // This image definition is here instead of images.h because it's modified dynamically by the drawBattery function
 uint8_t imgBattery[16] = {0xFF, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0xE7, 0x3C};
 
@@ -81,10 +84,6 @@ static char ourId[5];
 // GeoCoord object for the screen
 GeoCoord geoCoord;
 
-// OEM Config File
-static const char *oemConfigFile = "/prefs/oem.proto";
-OEMStore oemStore;
-
 #ifdef SHOW_REDRAWS
 static bool heartbeat = false;
 #endif
@@ -94,13 +93,17 @@ static uint16_t displayWidth, displayHeight;
 #define SCREEN_WIDTH displayWidth
 #define SCREEN_HEIGHT displayHeight
 
-#if defined(HAS_EINK) || defined(ILI9341_DRIVER)
+#if defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16
 #define FONT_MEDIUM ArialMT_Plain_24
 #define FONT_LARGE ArialMT_Plain_24
 #else
+#ifdef OLED_RU
+#define FONT_SMALL ArialMT_Plain_10_RU
+#else
 #define FONT_SMALL ArialMT_Plain_10
+#endif
 #define FONT_MEDIUM ArialMT_Plain_16
 #define FONT_LARGE ArialMT_Plain_24
 #endif
@@ -109,12 +112,10 @@ static uint16_t displayWidth, displayHeight;
 
 #define FONT_HEIGHT_SMALL fontHeight(FONT_SMALL)
 #define FONT_HEIGHT_MEDIUM fontHeight(FONT_MEDIUM)
+#define FONT_HEIGHT_LARGE fontHeight(FONT_LARGE)
 
 #define getStringCenteredX(s) ((SCREEN_WIDTH - display->getStringWidth(s)) / 2)
 
-#ifndef SCREEN_TRANSITION_MSECS
-#define SCREEN_TRANSITION_MSECS 300
-#endif
 
 /**
  * Draw the icon with extra info printed around the corners
@@ -212,7 +213,7 @@ static void drawSSLScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     display->setFont(FONT_SMALL);
     display->drawString(64 + x, y, "Creating SSL certificate");
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     yield();
     esp_task_wdt_reset();
 #endif
@@ -228,38 +229,29 @@ static void drawSSLScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 // Used when booting without a region set
 static void drawWelcomeScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-
+    display->setFont(FONT_SMALL);
+    display->setTextAlignment(TEXT_ALIGN_CENTER);
+    display->drawString(64 + x, y, "//\\ E S H T /\\ S T / C");
+    display->drawString(64 + x, y + FONT_HEIGHT_SMALL, getDeviceName());
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    
     if ((millis() / 10000) % 2) {
-        display->setFont(FONT_SMALL);
-
-        display->setTextAlignment(TEXT_ALIGN_CENTER);
-        display->drawString(64 + x, y, "//\\ E S H T /\\ S T / C");
-
-        display->setTextAlignment(TEXT_ALIGN_LEFT);
-
         display->drawString(x, y + FONT_HEIGHT_SMALL * 2 - 3, "Set the region using the");
         display->drawString(x, y + FONT_HEIGHT_SMALL * 3 - 3, "Meshtastic Android, iOS,");
         display->drawString(x, y + FONT_HEIGHT_SMALL * 4 - 3, "Flasher or CLI client.");
     } else {
-        display->setFont(FONT_SMALL);
-
-        display->setTextAlignment(TEXT_ALIGN_CENTER);
-        display->drawString(64 + x, y, "//\\ E S H T /\\ S T / C");
-
-        display->setTextAlignment(TEXT_ALIGN_LEFT);
-
         display->drawString(x, y + FONT_HEIGHT_SMALL * 2 - 3, "Visit meshtastic.org");
         display->drawString(x, y + FONT_HEIGHT_SMALL * 3 - 3, "for more information.");
         display->drawString(x, y + FONT_HEIGHT_SMALL * 4 - 3, "");
     }
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     yield();
     esp_task_wdt_reset();
 #endif
 }
 
-#ifdef HAS_EINK
+#ifdef USE_EINK
 /// Used on eink displays while in deep sleep
 static void drawSleepScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -299,8 +291,13 @@ static void drawFrameBluetooth(OLEDDisplay *display, OLEDDisplayUiState *state,
     display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Enter this code");
 
     display->setFont(FONT_LARGE);
-    display->drawString(64 + x, 26 + y, btPIN);
 
+    auto displayPin = new String(btPIN);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->drawString(12 + x, 26 + y, displayPin->substring(0, 3));
+    display->drawString(72 + x, 26 + y, displayPin->substring(3, 6));
+    
+    display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setFont(FONT_SMALL);
     char buf[30];
     const char *name = "Name: ";
@@ -317,6 +314,14 @@ static void drawFrameShutdown(OLEDDisplay *display, OLEDDisplayUiState *state, i
     display->drawString(64 + x, 26 + y, "Shutting down...");
 }
 
+static void drawFrameReboot(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->setTextAlignment(TEXT_ALIGN_CENTER);
+
+    display->setFont(FONT_MEDIUM);
+    display->drawString(64 + x, 26 + y, "Rebooting...");
+}
+
 static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     display->setTextAlignment(TEXT_ALIGN_CENTER);
@@ -329,9 +334,6 @@ static void drawFrameFirmware(OLEDDisplay *display, OLEDDisplayUiState *state, i
     } else {
         display->drawString(64 + x, FONT_HEIGHT_SMALL + y + 2, "Please wait . .  ");
     }
-
-    // display->setFont(FONT_LARGE);
-    // display->drawString(64 + x, 26 + y, btPIN);
 }
 
 /// Draw the last text message we received
@@ -516,6 +518,8 @@ static void drawGPSAltitude(OLEDDisplay *display, int16_t x, int16_t y, const GP
     } else {
         geoCoord.updateCoords(int32_t(gps->getLatitude()), int32_t(gps->getLongitude()), int32_t(gps->getAltitude()));
         displayLine = "Altitude: " + String(geoCoord.getAltitude()) + "m";
+        if (config.display.units == Config_DisplayConfig_DisplayUnits_IMPERIAL)
+            displayLine = "Altitude: " + String(geoCoord.getAltitude() * METERS_TO_FEET) + "ft";
         display->drawString(x + (SCREEN_WIDTH - (display->getStringWidth(displayLine))) / 2, y, displayLine);
     }
 }
@@ -534,21 +538,21 @@ static void drawGPScoordinates(OLEDDisplay *display, int16_t x, int16_t y, const
         display->drawString(x + (SCREEN_WIDTH - (display->getStringWidth(displayLine))) / 2, y, displayLine);
     } else {
 
-        if (gpsFormat != Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDMS) {
+        if (gpsFormat != Config_DisplayConfig_GpsCoordinateFormat_DMS) {
             char coordinateLine[22];
             geoCoord.updateCoords(int32_t(gps->getLatitude()), int32_t(gps->getLongitude()), int32_t(gps->getAltitude()));
-            if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDec) { // Decimal Degrees
+            if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_DEC) { // Decimal Degrees
                 sprintf(coordinateLine, "%f %f", geoCoord.getLatitude() * 1e-7, geoCoord.getLongitude() * 1e-7);
-            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_GpsFormatUTM) { // Universal Transverse Mercator
+            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_UTM) { // Universal Transverse Mercator
                 sprintf(coordinateLine, "%2i%1c %06u %07u", geoCoord.getUTMZone(), geoCoord.getUTMBand(),
                         geoCoord.getUTMEasting(), geoCoord.getUTMNorthing());
-            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_GpsFormatMGRS) { // Military Grid Reference System
+            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_MGRS) { // Military Grid Reference System
                 sprintf(coordinateLine, "%2i%1c %1c%1c %05u %05u", geoCoord.getMGRSZone(), geoCoord.getMGRSBand(),
                         geoCoord.getMGRSEast100k(), geoCoord.getMGRSNorth100k(), geoCoord.getMGRSEasting(),
                         geoCoord.getMGRSNorthing());
-            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOLC) { // Open Location Code
+            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_OLC) { // Open Location Code
                 geoCoord.getOLCCode(coordinateLine);
-            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_GpsFormatOSGR) { // Ordnance Survey Grid Reference
+            } else if (gpsFormat == Config_DisplayConfig_GpsCoordinateFormat_OSGR) { // Ordnance Survey Grid Reference
                 if (geoCoord.getOSGRE100k() == 'I' || geoCoord.getOSGRN100k() == 'I') // OSGR is only valid around the UK region
                     sprintf(coordinateLine, "%s", "Out of Boundary");
                 else
@@ -595,7 +599,7 @@ class Point
     void rotate(float radian)
     {
         float cos = cosf(radian), sin = sinf(radian);
-        float rx = x * cos - y * sin, ry = x * sin + y * cos;
+        float rx = x * cos + y * sin, ry = -x * sin + y * cos;
 
         x = rx;
         y = ry;
@@ -609,8 +613,10 @@ class Point
 
     void scale(float f)
     {
+        //We use -f here to counter the flip that happens
+        //on the y axis when drawing and rotating on screen
         x *= f;
-        y *= f;
+        y *= -f;
     }
 };
 
@@ -658,6 +664,26 @@ static bool hasPosition(NodeInfo *n)
     return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0);
 }
 
+static uint16_t getCompassDiam(OLEDDisplay *display)
+{
+    uint16_t diam = 0;
+    // get the smaller of the 2 dimensions and subtract 20
+    if(display->getWidth() > display->getHeight()) {
+        diam = display->getHeight();
+        // if 2/3 of the other size would be smaller, use that
+        if (diam > (display->getWidth() * 2 / 3)) {
+            diam = display->getWidth() * 2 / 3;
+        }
+    } else {
+        diam = display->getWidth();
+        if (diam > (display->getHeight() * 2 / 3)) {
+            diam = display->getHeight() * 2 / 3;
+        }
+    }
+    
+    return diam - 20;
+};
+
 /// We will skip one node - the one for us, so we just blindly loop over all
 /// nodes
 static size_t nodeIndex;
@@ -674,7 +700,7 @@ static void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t comp
 
     for (int i = 0; i < 4; i++) {
         arrowPoints[i]->rotate(headingRadian);
-        arrowPoints[i]->scale(COMPASS_DIAM * 0.6);
+        arrowPoints[i]->scale(getCompassDiam(display) * 0.6);
         arrowPoints[i]->translate(compassX, compassY);
     }
     drawLine(display, tip, tail);
@@ -682,16 +708,21 @@ static void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t comp
     drawLine(display, rightArrow, tip);
 }
 
-// Draw the compass heading
-static void drawCompassHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
+// Draw north
+static void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading)
 {
-    Point N1(-0.04f, -0.65f), N2(0.04f, -0.65f);
-    Point N3(-0.04f, -0.55f), N4(0.04f, -0.55f);
+    //If north is supposed to be at the top of the compass we want rotation to be +0
+    if(config.display.compass_north_top)
+        myHeading = -0;
+    
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
     Point *rosePoints[] = {&N1, &N2, &N3, &N4};
 
     for (int i = 0; i < 4; i++) {
-        rosePoints[i]->rotate(myHeading);
-        rosePoints[i]->scale(-1 * COMPASS_DIAM);
+        // North on compass will be negative of heading
+        rosePoints[i]->rotate(-myHeading);
+        rosePoints[i]->scale(getCompassDiam(display));
         rosePoints[i]->translate(compassX, compassY);
     }
     drawLine(display, N1, N3);
@@ -756,13 +787,13 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     const char *fields[] = {username, distStr, signalStr, lastStr, NULL};
 
     // coordinates for the center of the compass/circle
-    int16_t compassX = x + SCREEN_WIDTH - COMPASS_DIAM / 2 - 5, compassY = y + SCREEN_HEIGHT / 2;
+    int16_t compassX = x + SCREEN_WIDTH - getCompassDiam(display) / 2 - 5, compassY = y + SCREEN_HEIGHT / 2;
     bool hasNodeHeading = false;
 
     if (ourNode && hasPosition(ourNode)) {
         Position &op = ourNode->position;
         float myHeading = estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
-        drawCompassHeading(display, compassX, compassY, myHeading);
+        drawCompassNorth(display, compassX, compassY, myHeading);
 
         if (hasPosition(node)) {
             // display direction toward node
@@ -770,17 +801,26 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
             Position &p = node->position;
             float d =
                 GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
-            if (d < 2000)
-                snprintf(distStr, sizeof(distStr), "%.0f m", d);
-            else
-                snprintf(distStr, sizeof(distStr), "%.1f km", d / 1000);
 
-            // FIXME, also keep the guess at the operators heading and add/substract
-            // it.  currently we don't do this and instead draw north up only.
+            if (config.display.units == Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+                if (d < (2 * MILES_TO_FEET))
+                    snprintf(distStr, sizeof(distStr), "%.0f ft", d * METERS_TO_FEET);
+                else
+                    snprintf(distStr, sizeof(distStr), "%.1f mi", d * METERS_TO_FEET / MILES_TO_FEET);
+            } else {
+                if (d < 2000)
+                    snprintf(distStr, sizeof(distStr), "%.0f m", d);
+                else
+                    snprintf(distStr, sizeof(distStr), "%.1f km", d / 1000);
+            }
+
             float bearingToOther =
-                GeoCoord::bearing(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
-            float headingRadian = bearingToOther - myHeading;
-            drawNodeHeading(display, compassX, compassY, headingRadian);
+                GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            // If the top of the compass is a static north then bearingToOther can be drawn on the compass directly
+            // If the top of the compass is not a static north we need adjust bearingToOther based on heading
+            if(!config.display.compass_north_top)
+                bearingToOther -= myHeading;
+            drawNodeHeading(display, compassX, compassY, bearingToOther);
         }
     }
     if (!hasNodeHeading)
@@ -788,7 +828,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
         // Debug info for gps lock errors
         // DEBUG_MSG("ourNode %d, ourPos %d, theirPos %d\n", !!ourNode, ourNode && hasPosition(ourNode), hasPosition(node));
         display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
-    display->drawCircle(compassX, compassY, COMPASS_DIAM / 2);
+    display->drawCircle(compassX, compassY, getCompassDiam(display) / 2);
 
     // Must be after distStr is populated
     drawColumns(display, x, y, fields);
@@ -843,7 +883,7 @@ Screen::Screen(uint8_t address, int sda, int scl) : OSThread("Screen"), cmdQueue
  */
 void Screen::doDeepSleep()
 {
-#ifdef HAS_EINK
+#ifdef USE_EINK
     static FrameCallback sleepFrames[] = {drawSleepScreen};
     static const int sleepFrameCount = sizeof(sleepFrames) / sizeof(sleepFrames[0]);
     ui.setFrames(sleepFrames, sleepFrameCount);
@@ -884,16 +924,13 @@ void Screen::setup()
     dispdev.setDetected(screen_model);
 #endif
 
-    // Load OEM config from Proto file if existent
-    loadProto(oemConfigFile, OEMStore_size, sizeof(oemConfigFile), OEMStore_fields, &oemStore);
-
     // Initialising the UI will init the display too.
     ui.init();
 
     displayWidth = dispdev.width();
     displayHeight = dispdev.height();
 
-    ui.setTimePerTransition(SCREEN_TRANSITION_MSECS);
+    ui.setTimePerTransition(0);
 
     ui.setIndicatorPosition(BOTTOM);
     // Defines where the first frame is located in the bar.
@@ -922,8 +959,12 @@ void Screen::setup()
 
 #ifdef SCREEN_MIRROR
     dispdev.mirrorScreen();
-#elif defined(SCREEN_FLIP_VERTICALLY)
-    dispdev.flipScreenVertically();
+#else
+    // Standard behaviour is to FLIP the screen (needed on T-Beam). If this config item is set, unflip it, and thereby logically flip it.
+    // If you have a headache now, you're welcome.
+    if (!config.display.flip_screen) {
+        dispdev.flipScreenVertically();
+    }
 #endif
 
     // Get our hardware ID
@@ -935,9 +976,11 @@ void Screen::setup()
     handleSetOn(true);
 
     // On some ssd1306 clones, the first draw command is discarded, so draw it
-    // twice initially.
+    // twice initially. Skip this for EINK Displays to save a few seconds during boot
     ui.update();
+#ifndef USE_EINK
     ui.update();
+#endif
     serialSinceMsec = millis();
 
     // Subscribe to status updates
@@ -954,7 +997,7 @@ void Screen::setup()
 void Screen::forceDisplay()
 {
     // Nasty hack to force epaper updates for 'key' frames.  FIXME, cleanup.
-#ifdef HAS_EINK
+#ifdef USE_EINK
     dispdev.forceDisplay();
 #endif
 }
@@ -994,7 +1037,7 @@ int32_t Screen::runOnce()
     }
 
 #ifndef DISABLE_WELCOME_UNSET
-    if (showingNormalScreen && config.lora.region == Config_LoRaConfig_RegionCode_Unset) {
+    if (showingNormalScreen && config.lora.region == Config_LoRaConfig_RegionCode_UNSET) {
         setWelcomeFrames();
     }
 #endif
@@ -1032,6 +1075,9 @@ int32_t Screen::runOnce()
         case Cmd::START_SHUTDOWN_SCREEN:
             handleShutdownScreen();
             break;
+        case Cmd::START_REBOOT_SCREEN:
+            handleRebootScreen();
+            break;
         default:
             DEBUG_MSG("BUG: invalid cmd\n");
         }
@@ -1052,13 +1098,8 @@ int32_t Screen::runOnce()
     // otherwise that breaks animations.
     if (targetFramerate != IDLE_FRAMERATE && ui.getUiState()->frameState == FIXED) {
         // oldFrameState = ui.getUiState()->frameState;
-        DEBUG_MSG("Setting idle framerate\n");
         targetFramerate = IDLE_FRAMERATE;
 
-#ifndef NO_ESP32
-        setCPUFast(false); // Turn up the CPU to improve screen animations
-#endif
-
         ui.setTargetFPS(targetFramerate);
         forceDisplay();
     }
@@ -1180,7 +1221,7 @@ void Screen::setFrames()
     // call a method on debugInfoScreen object (for more details)
     normalFrames[numframes++] = &Screen::drawDebugInfoSettingsTrampoline;
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     if (isWifiAvailable()) {
         // call a method on debugInfoScreen object (for more details)
         normalFrames[numframes++] = &Screen::drawDebugInfoWiFiTrampoline;
@@ -1224,6 +1265,18 @@ void Screen::handleShutdownScreen()
     setFastFramerate();
 }
 
+void Screen::handleRebootScreen()
+{
+    DEBUG_MSG("showing reboot screen\n");
+    showingNormalScreen = false;
+
+    static FrameCallback rebootFrames[] = {drawFrameReboot};
+
+    ui.disableAllIndicators();
+    ui.setFrames(rebootFrames, 1);
+    setFastFramerate();
+}
+
 void Screen::handleStartFirmwareUpdateScreen()
 {
     DEBUG_MSG("showing firmware screen\n");
@@ -1270,7 +1323,6 @@ void Screen::handleOnPress()
     // If we are in a transition, the press must have bounced, drop it.
     if (ui.getUiState()->frameState == FIXED) {
         ui.nextFrame();
-        DEBUG_MSG("Setting LastScreenTransition\n");
         lastScreenTransition = millis();
         setFastFramerate();
     }
@@ -1282,15 +1334,9 @@ void Screen::handleOnPress()
 
 void Screen::setFastFramerate()
 {
-    DEBUG_MSG("Setting fast framerate\n");
-
     // We are about to start a transition so speed up fps
     targetFramerate = SCREEN_TRANSITION_FRAMERATE;
 
-#ifndef NO_ESP32
-    setCPUFast(true); // Turn up the CPU to improve screen animations
-#endif
-
     ui.setTargetFPS(targetFramerate);
     setInterval(0); // redraw ASAP
     runASAP = true;
@@ -1342,9 +1388,9 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 // Jm
 void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-#ifdef HAS_WIFI
-    const char *wifiName = config.wifi.ssid;
-    const char *wifiPsw = config.wifi.psk;
+#if HAS_WIFI
+    const char *wifiName = config.network.wifi_ssid;
+    const char *wifiPsw = config.network.wifi_psk;
 
     displayedNodeNum = 0; // Not currently showing a node pane
 
@@ -1355,7 +1401,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 
     if (isSoftAPForced()) {
         display->drawString(x, y, String("WiFi: Software AP (Admin)"));
-    } else if (config.wifi.ap_mode) {
+    } else if (config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
         display->drawString(x, y, String("WiFi: Software AP"));
     } else if (WiFi.status() != WL_CONNECTED) {
         display->drawString(x, y, String("WiFi: Not Connected"));
@@ -1378,8 +1424,8 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     - WL_NO_SHIELD: assigned when no WiFi shield is present;
 
     */
-    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.wifi.ap_mode) {
-        if (config.wifi.ap_mode || isSoftAPForced()) {
+    if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
+        if (config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN || isSoftAPForced()) {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
 
             // Number of connections to the AP. Default max for the esp32 is 4
@@ -1471,7 +1517,7 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         }
 
     } else {
-        if (config.wifi.ap_mode) {
+        if (config.network.wifi_mode== Config_NetworkConfig_WiFiMode_ACCESS_POINT || config.network.wifi_mode == Config_NetworkConfig_WiFiMode_ACCESS_POINT_HIDDEN) {
             if ((millis() / 10000) % 2) {
                 display->drawString(x, y + FONT_HEIGHT_SMALL * 2, "SSID: " + String(wifiName));
             } else {
@@ -1519,25 +1565,25 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     auto mode = "";
 
     switch (config.lora.modem_preset) {
-    case Config_LoRaConfig_ModemPreset_ShortSlow:
+    case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
         mode = "ShortS";
         break;
-    case Config_LoRaConfig_ModemPreset_ShortFast:
+    case Config_LoRaConfig_ModemPreset_SHORT_FAST:
         mode = "ShortF";
         break;
-    case Config_LoRaConfig_ModemPreset_MedSlow:
+    case Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
         mode = "MedS";
         break;
-    case Config_LoRaConfig_ModemPreset_MedFast:
+    case Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
         mode = "MedF";
         break;
-    case Config_LoRaConfig_ModemPreset_LongSlow:
+    case Config_LoRaConfig_ModemPreset_LONG_SLOW:
         mode = "LongS";
         break;
-    case Config_LoRaConfig_ModemPreset_LongFast:
+    case Config_LoRaConfig_ModemPreset_LONG_FAST:
         mode = "LongF";
         break;
-    case Config_LoRaConfig_ModemPreset_VLongSlow:
+    case Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
         mode = "VeryL";
         break;
     default:
@@ -1596,7 +1642,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
     // Line 3
     if (config.display.gps_format !=
-        Config_DisplayConfig_GpsCoordinateFormat_GpsFormatDMS) // if DMS then don't draw altitude
+        Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
         drawGPSAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
 
     // Line 4
@@ -1612,6 +1658,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 // adjust Brightness cycle trough 1 to 254 as long as attachDuringLongPress is true
 void Screen::adjustBrightness()
 {
+    if (!useDisplay)
+        return;
+
     if (brightness == 254) {
         brightness = 0;
     } else {
@@ -1665,4 +1714,5 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 }
 
 } // namespace graphics
-#endif // NO_SCREEN
+
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -1,6 +1,8 @@
 #pragma once
 
-#ifdef NO_SCREEN
+#include "configuration.h"
+
+#if !HAS_SCREEN
 #include "power.h"
 namespace graphics
 {
@@ -18,6 +20,7 @@ class Screen
     void forceDisplay() {}
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
+    void startRebootScreen() {}
 };
 }
 
@@ -54,6 +57,16 @@ class Screen
 #define BRIGHTNESS_DEFAULT 150
 #endif
 
+// Meters to feet conversion
+#ifndef METERS_TO_FEET
+#define METERS_TO_FEET 3.28
+#endif
+
+// Feet to miles conversion
+#ifndef MILES_TO_FEET
+#define MILES_TO_FEET 5280
+#endif
+
 namespace graphics
 {
 
@@ -165,6 +178,13 @@ class Screen : public concurrency::OSThread
         enqueueCmd(cmd);
     }
 
+    void startRebootScreen()
+    {
+        ScreenCmd cmd;
+        cmd.cmd = Cmd::START_REBOOT_SCREEN;
+        enqueueCmd(cmd);
+    }
+
     /// Stops showing the bluetooth PIN screen.
     void stopBluetoothPinScreen() { enqueueCmd(ScreenCmd{.cmd = Cmd::STOP_BLUETOOTH_PIN_SCREEN}); }
 
@@ -202,19 +222,34 @@ class Screen : public concurrency::OSThread
         uint8_t last = LASTCHAR; // get last char
         LASTCHAR = ch;
 
-        switch (last) { // conversion depnding on first UTF8-character
-        case 0xC2: {
-            SKIPREST = false;
-            return (uint8_t)ch;
-        }
-        case 0xC3: {
-            SKIPREST = false;
-            return (uint8_t)(ch | 0xC0);
-        }
+        switch (last) { // conversion depending on first UTF8-character
+            case 0xC2: {
+                SKIPREST = false;
+                return (uint8_t)ch;
+            }
+            case 0xC3: {
+                SKIPREST = false;
+                return (uint8_t)(ch | 0xC0);
+            }
+            // map UTF-8 cyrillic chars to it Windows-1251 (CP-1251) ASCII codes
+            // note: in this case we must use compatible font - provided ArialMT_Plain_10/16/24 by 'ThingPulse/esp8266-oled-ssd1306' library
+            // have empty chars for non-latin ASCII symbols
+            case 0xD0: {
+                SKIPREST = false;
+                if (ch == 129) return (uint8_t)(168); // Ё
+                if (ch > 143 && ch < 192) return (uint8_t)(ch + 48);
+                break;
+            }
+            case 0xD1: {
+                SKIPREST = false;
+                if (ch == 145) return (uint8_t)(184); // ё
+                if (ch > 127 && ch < 144) return (uint8_t)(ch + 112);
+                break;
+            }
         }
 
         // We want to strip out prefix chars for two-byte char formats
-        if (ch == 0xC2 || ch == 0xC3 || ch == 0x82)
+        if (ch == 0xC2 || ch == 0xC3 || ch == 0x82 || ch == 0xD0 || ch == 0xD1)
             return (uint8_t)0;
 
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
@@ -278,6 +313,7 @@ class Screen : public concurrency::OSThread
     void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
     void handleShutdownScreen();
+    void handleRebootScreen();
     /// Rebuilds our list of frames (screens) to default ones.
     void setFrames();
 
@@ -315,7 +351,7 @@ class Screen : public concurrency::OSThread
     SSD1306Wire dispdev;
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER)
     TFTDisplay dispdev;
-#elif defined(HAS_EINK)
+#elif defined(USE_EINK)
     EInkDisplay dispdev;
 #elif defined(USE_ST7567)
     ST7567Wire dispdev;

src/graphics/TFTDisplay.cpp

@@ -22,13 +22,23 @@ void TFTDisplay::display(void)
 {
     concurrency::LockGuard g(spiLock);
 
-    // FIXME - only draw bits have changed (use backbuf similar to the other displays)
-    // tft.drawBitmap(0, 0, buffer, 128, 64, TFT_YELLOW, TFT_BLACK);
-    for (uint16_t y = 0; y < displayHeight; y++) {
-        for (uint16_t x = 0; x < displayWidth; x++) {
+    uint16_t x,y;
+
+    for (y = 0; y < displayHeight; y++) {
+        for (x = 0; x < displayWidth; x++) {
             // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
             auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
-            tft.drawPixel(x, y, isset ? TFT_WHITE : TFT_BLACK);
+            auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
+            if (isset != dblbuf_isset) {
+                tft.drawPixel(x, y, isset ? TFT_WHITE : TFT_BLACK);
+            }
+        }
+    }
+    // Copy the Buffer to the Back Buffer
+    for (y = 0; y < (displayHeight / 8); y++) {
+        for (x = 0; x < displayWidth; x++) {
+            uint16_t pos = x + y * displayWidth;
+            buffer_back[pos] = buffer[pos];
         }
     }
 }

src/graphics/fonts/OLEDDisplayFontsRU.cpp

@@ -0,0 +1,426 @@
+#include "OLEDDisplayFontsRU.h"
+
+// Font generated or edited with the glyphEditor
+const uint8_t ArialMT_Plain_10_RU[] PROGMEM = {
+	0x0A, // Width: 10
+	0x0D, // Height: 13
+	0x20, // First char: 32
+	0xE0, // Number of chars: 224
+	
+	// Jump Table:
+	0xFF, 0xFF, 0x00, 0x0A, // 32
+	0x00, 0x00, 0x04, 0x03, // 33
+	0x00, 0x04, 0x05, 0x04, // 34
+	0x00, 0x09, 0x09, 0x06, // 35
+	0x00, 0x12, 0x0A, 0x06, // 36
+	0x00, 0x1C, 0x10, 0x09, // 37
+	0x00, 0x2C, 0x0E, 0x08, // 38
+	0x00, 0x3A, 0x01, 0x02, // 39
+	0x00, 0x3B, 0x06, 0x04, // 40
+	0x00, 0x41, 0x06, 0x04, // 41
+	0x00, 0x47, 0x05, 0x04, // 42
+	0x00, 0x4C, 0x09, 0x06, // 43
+	0x00, 0x55, 0x04, 0x03, // 44
+	0x00, 0x59, 0x03, 0x03, // 45
+	0x00, 0x5C, 0x04, 0x03, // 46
+	0x00, 0x60, 0x05, 0x04, // 47
+	0x00, 0x65, 0x0A, 0x06, // 48
+	0x00, 0x6F, 0x08, 0x05, // 49
+	0x00, 0x77, 0x0A, 0x06, // 50
+	0x00, 0x81, 0x0A, 0x06, // 51
+	0x00, 0x8B, 0x0B, 0x07, // 52
+	0x00, 0x96, 0x0A, 0x06, // 53
+	0x00, 0xA0, 0x0A, 0x06, // 54
+	0x00, 0xAA, 0x09, 0x06, // 55
+	0x00, 0xB3, 0x0A, 0x06, // 56
+	0x00, 0xBD, 0x0A, 0x06, // 57
+	0x00, 0xC7, 0x04, 0x03, // 58
+	0x00, 0xCB, 0x04, 0x03, // 59
+	0x00, 0xCF, 0x0A, 0x06, // 60
+	0x00, 0xD9, 0x09, 0x06, // 61
+	0x00, 0xE2, 0x09, 0x06, // 62
+	0x00, 0xEB, 0x0B, 0x07, // 63
+	0x00, 0xF6, 0x14, 0x0B, // 64
+	0x01, 0x0A, 0x0E, 0x08, // 65
+	0x01, 0x18, 0x0C, 0x07, // 66
+	0x01, 0x24, 0x0C, 0x07, // 67
+	0x01, 0x30, 0x0B, 0x07, // 68
+	0x01, 0x3B, 0x0C, 0x07, // 69
+	0x01, 0x47, 0x09, 0x06, // 70
+	0x01, 0x50, 0x0D, 0x08, // 71
+	0x01, 0x5D, 0x0C, 0x07, // 72
+	0x01, 0x69, 0x04, 0x03, // 73
+	0x01, 0x6D, 0x08, 0x05, // 74
+	0x01, 0x75, 0x0E, 0x08, // 75
+	0x01, 0x83, 0x0C, 0x07, // 76
+	0x01, 0x8F, 0x10, 0x09, // 77
+	0x01, 0x9F, 0x0C, 0x07, // 78
+	0x01, 0xAB, 0x0E, 0x08, // 79
+	0x01, 0xB9, 0x0B, 0x07, // 80
+	0x01, 0xC4, 0x0E, 0x08, // 81
+	0x01, 0xD2, 0x0C, 0x07, // 82
+	0x01, 0xDE, 0x0C, 0x07, // 83
+	0x01, 0xEA, 0x0B, 0x07, // 84
+	0x01, 0xF5, 0x0C, 0x07, // 85
+	0x02, 0x01, 0x0D, 0x08, // 86
+	0x02, 0x0E, 0x11, 0x0A, // 87
+	0x02, 0x1F, 0x0E, 0x08, // 88
+	0x02, 0x2D, 0x0D, 0x08, // 89
+	0x02, 0x3A, 0x0C, 0x07, // 90
+	0x02, 0x46, 0x06, 0x04, // 91
+	0x02, 0x4C, 0x06, 0x04, // 92
+	0x02, 0x52, 0x04, 0x03, // 93
+	0x02, 0x56, 0x09, 0x06, // 94
+	0x02, 0x5F, 0x0C, 0x07, // 95
+	0x02, 0x6B, 0x03, 0x03, // 96
+	0x02, 0x6E, 0x0A, 0x06, // 97
+	0x02, 0x78, 0x0A, 0x06, // 98
+	0x02, 0x82, 0x0A, 0x06, // 99
+	0x02, 0x8C, 0x0A, 0x06, // 100
+	0x02, 0x96, 0x0A, 0x06, // 101
+	0x02, 0xA0, 0x05, 0x04, // 102
+	0x02, 0xA5, 0x0A, 0x06, // 103
+	0x02, 0xAF, 0x0A, 0x06, // 104
+	0x02, 0xB9, 0x04, 0x03, // 105
+	0x02, 0xBD, 0x04, 0x03, // 106
+	0x02, 0xC1, 0x08, 0x05, // 107
+	0x02, 0xC9, 0x04, 0x03, // 108
+	0x02, 0xCD, 0x10, 0x09, // 109
+	0x02, 0xDD, 0x0A, 0x06, // 110
+	0x02, 0xE7, 0x0A, 0x06, // 111
+	0x02, 0xF1, 0x0A, 0x06, // 112
+	0x02, 0xFB, 0x0A, 0x06, // 113
+	0x03, 0x05, 0x05, 0x04, // 114
+	0x03, 0x0A, 0x08, 0x05, // 115
+	0x03, 0x12, 0x06, 0x04, // 116
+	0x03, 0x18, 0x0A, 0x06, // 117
+	0x03, 0x22, 0x09, 0x06, // 118
+	0x03, 0x2B, 0x0E, 0x08, // 119
+	0x03, 0x39, 0x0A, 0x06, // 120
+	0x03, 0x43, 0x09, 0x06, // 121
+	0x03, 0x4C, 0x0A, 0x06, // 122
+	0x03, 0x56, 0x06, 0x04, // 123
+	0x03, 0x5C, 0x04, 0x03, // 124
+	0x03, 0x60, 0x05, 0x04, // 125
+	0x03, 0x65, 0x09, 0x06, // 126
+	0xFF, 0xFF, 0x00, 0x0A, // 127
+	0xFF, 0xFF, 0x00, 0x0A, // 128
+	0xFF, 0xFF, 0x00, 0x0A, // 129
+	0xFF, 0xFF, 0x00, 0x0A, // 130
+	0xFF, 0xFF, 0x00, 0x0A, // 131
+	0xFF, 0xFF, 0x00, 0x0A, // 132
+	0xFF, 0xFF, 0x00, 0x0A, // 133
+	0xFF, 0xFF, 0x00, 0x0A, // 134
+	0xFF, 0xFF, 0x00, 0x0A, // 135
+	0xFF, 0xFF, 0x00, 0x0A, // 136
+	0xFF, 0xFF, 0x00, 0x0A, // 137
+	0xFF, 0xFF, 0x00, 0x0A, // 138
+	0xFF, 0xFF, 0x00, 0x0A, // 139
+	0xFF, 0xFF, 0x00, 0x0A, // 140
+	0xFF, 0xFF, 0x00, 0x0A, // 141
+	0xFF, 0xFF, 0x00, 0x0A, // 142
+	0xFF, 0xFF, 0x00, 0x0A, // 143
+	0xFF, 0xFF, 0x00, 0x0A, // 144
+	0xFF, 0xFF, 0x00, 0x0A, // 145
+	0xFF, 0xFF, 0x00, 0x0A, // 146
+	0xFF, 0xFF, 0x00, 0x0A, // 147
+	0xFF, 0xFF, 0x00, 0x0A, // 148
+	0xFF, 0xFF, 0x00, 0x0A, // 149
+	0xFF, 0xFF, 0x00, 0x0A, // 150
+	0xFF, 0xFF, 0x00, 0x0A, // 151
+	0xFF, 0xFF, 0x00, 0x0A, // 152
+	0xFF, 0xFF, 0x00, 0x0A, // 153
+	0xFF, 0xFF, 0x00, 0x0A, // 154
+	0xFF, 0xFF, 0x00, 0x0A, // 155
+	0xFF, 0xFF, 0x00, 0x0A, // 156
+	0xFF, 0xFF, 0x00, 0x0A, // 157
+	0xFF, 0xFF, 0x00, 0x0A, // 158
+	0xFF, 0xFF, 0x00, 0x0A, // 159
+	0xFF, 0xFF, 0x00, 0x0A, // 160
+	0x03, 0x6E, 0x04, 0x03, // 161
+	0x03, 0x72, 0x0A, 0x06, // 162
+	0x03, 0x7C, 0x0C, 0x07, // 163
+	0x03, 0x88, 0x0A, 0x06, // 164
+	0x03, 0x92, 0x0A, 0x06, // 165
+	0x03, 0x9C, 0x04, 0x03, // 166
+	0x03, 0xA0, 0x0A, 0x06, // 167
+	0x03, 0xAA, 0x0C, 0x07, // 168
+	0x03, 0xB6, 0x0D, 0x08, // 169
+	0x03, 0xC3, 0x07, 0x05, // 170
+	0x03, 0xCA, 0x0A, 0x06, // 171
+	0x03, 0xD4, 0x09, 0x06, // 172
+	0x03, 0xDD, 0x03, 0x03, // 173
+	0x03, 0xE0, 0x0D, 0x08, // 174
+	0x03, 0xED, 0x0B, 0x07, // 175
+	0x03, 0xF8, 0x07, 0x05, // 176
+	0x03, 0xFF, 0x0A, 0x06, // 177
+	0x04, 0x09, 0x05, 0x04, // 178
+	0x04, 0x0E, 0x05, 0x04, // 179
+	0x04, 0x13, 0x05, 0x04, // 180
+	0x04, 0x18, 0x0A, 0x06, // 181
+	0x04, 0x22, 0x09, 0x06, // 182
+	0x04, 0x2B, 0x03, 0x03, // 183
+	0x04, 0x2E, 0x0B, 0x07, // 184
+	0x04, 0x39, 0x0B, 0x07, // 185
+	0x04, 0x44, 0x07, 0x05, // 186
+	0x04, 0x4B, 0x0A, 0x06, // 187
+	0x04, 0x55, 0x10, 0x09, // 188
+	0x04, 0x65, 0x10, 0x09, // 189
+	0x04, 0x75, 0x10, 0x09, // 190
+	0x04, 0x85, 0x0A, 0x06, // 191
+	0x04, 0x8F, 0x0C, 0x07, // 192
+	0x04, 0x9B, 0x0C, 0x07, // 193
+	0x04, 0xA7, 0x0C, 0x07, // 194
+	0x04, 0xB3, 0x0B, 0x07, // 195
+	0x04, 0xBE, 0x0C, 0x07, // 196
+	0x04, 0xCA, 0x0C, 0x07, // 197
+	0x04, 0xD6, 0x0C, 0x07, // 198
+	0x04, 0xE2, 0x0C, 0x07, // 199
+	0x04, 0xEE, 0x0C, 0x07, // 200
+	0x04, 0xFA, 0x0C, 0x07, // 201
+	0x05, 0x06, 0x0C, 0x07, // 202
+	0x05, 0x12, 0x0C, 0x07, // 203
+	0x05, 0x1E, 0x0C, 0x07, // 204
+	0x05, 0x2A, 0x0C, 0x07, // 205
+	0x05, 0x36, 0x0C, 0x07, // 206
+	0x05, 0x42, 0x0C, 0x07, // 207
+	0x05, 0x4E, 0x0B, 0x07, // 208
+	0x05, 0x59, 0x0C, 0x07, // 209
+	0x05, 0x65, 0x0B, 0x07, // 210
+	0x05, 0x70, 0x0C, 0x07, // 211
+	0x05, 0x7C, 0x0B, 0x07, // 212
+	0x05, 0x87, 0x0C, 0x07, // 213
+	0x05, 0x93, 0x0C, 0x07, // 214
+	0x05, 0x9F, 0x0C, 0x07, // 215
+	0x05, 0xAB, 0x0C, 0x07, // 216
+	0x05, 0xB7, 0x0E, 0x08, // 217
+	0x05, 0xC5, 0x0C, 0x07, // 218
+	0x05, 0xD1, 0x0C, 0x07, // 219
+	0x05, 0xDD, 0x0C, 0x07, // 220
+	0x05, 0xE9, 0x0C, 0x07, // 221
+	0x05, 0xF5, 0x0C, 0x07, // 222
+	0x06, 0x01, 0x0C, 0x07, // 223
+	0x06, 0x0D, 0x0C, 0x07, // 224
+	0x06, 0x19, 0x0C, 0x07, // 225
+	0x06, 0x25, 0x0C, 0x07, // 226
+	0x06, 0x31, 0x0B, 0x07, // 227
+	0x06, 0x3C, 0x0C, 0x07, // 228
+	0x06, 0x48, 0x0B, 0x07, // 229
+	0x06, 0x53, 0x0C, 0x07, // 230
+	0x06, 0x5F, 0x0C, 0x07, // 231
+	0x06, 0x6B, 0x0C, 0x07, // 232
+	0x06, 0x77, 0x0C, 0x07, // 233
+	0x06, 0x83, 0x0C, 0x07, // 234
+	0x06, 0x8F, 0x0C, 0x07, // 235
+	0x06, 0x9B, 0x0C, 0x07, // 236
+	0x06, 0xA7, 0x0C, 0x07, // 237
+	0x06, 0xB3, 0x0C, 0x07, // 238
+	0x06, 0xBF, 0x0C, 0x07, // 239
+	0x06, 0xCB, 0x0B, 0x07, // 240
+	0x06, 0xD6, 0x0C, 0x07, // 241
+	0x06, 0xE2, 0x0B, 0x07, // 242
+	0x06, 0xED, 0x0C, 0x07, // 243
+	0x06, 0xF9, 0x0B, 0x07, // 244
+	0x07, 0x04, 0x0C, 0x07, // 245
+	0x07, 0x10, 0x0C, 0x07, // 246
+	0x07, 0x1C, 0x0C, 0x07, // 247
+	0x07, 0x28, 0x0C, 0x07, // 248
+	0x07, 0x34, 0x0E, 0x08, // 249
+	0x07, 0x42, 0x0C, 0x07, // 250
+	0x07, 0x4E, 0x0C, 0x07, // 251
+	0x07, 0x5A, 0x0C, 0x07, // 252
+	0x07, 0x66, 0x0C, 0x07, // 253
+	0x07, 0x72, 0x0C, 0x07, // 254
+	0x07, 0x7E, 0x0C, 0x07, // 255
+	
+	// Font Data:
+	0x00, 0x00, 0xF8, 0x02, // 33
+	0x38, 0x00, 0x00, 0x00, 0x38, // 34
+	0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8, // 35
+	0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01, // 36
+	0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01, // 37
+	0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02, // 38
+	0x38, // 39
+	0xE0, 0x03, 0x10, 0x04, 0x08, 0x08, // 40
+	0x08, 0x08, 0x10, 0x04, 0xE0, 0x03, // 41
+	0x28, 0x00, 0x18, 0x00, 0x28, // 42
+	0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40, // 43
+	0x00, 0x00, 0x00, 0x06, // 44
+	0x80, 0x00, 0x80, // 45
+	0x00, 0x00, 0x00, 0x02, // 46
+	0x00, 0x03, 0xE0, 0x00, 0x18, // 47
+	0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 48
+	0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03, // 49
+	0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02, // 50
+	0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 51
+	0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80, // 52
+	0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01, // 53
+	0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01, // 54
+	0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08, // 55
+	0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 56
+	0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01, // 57
+	0x00, 0x00, 0x20, 0x02, // 58
+	0x00, 0x00, 0x20, 0x06, // 59
+	0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01, // 60
+	0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, // 61
+	0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40, // 62
+	0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30, // 63
+	0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64
+	0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02, // 65
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01, // 66
+	0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, // 67
+	0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0, // 68
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, // 69
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08, // 70
+	0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0, // 71
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 72
+	0x00, 0x00, 0xF8, 0x03, // 73
+	0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01, // 74
+	0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02, // 75
+	0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, // 76
+	0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03, // 77
+	0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03, // 78
+	0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 79
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 80
+	0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02, // 81
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03, // 82
+	0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01, // 83
+	0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, // 84
+	0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01, // 85
+	0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08, // 86
+	0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18, // 87
+	0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02, // 88
+	0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08, // 89
+	0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02, // 90
+	0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08, // 91
+	0x18, 0x00, 0xE0, 0x00, 0x00, 0x03, // 92
+	0x08, 0x08, 0xF8, 0x0F, // 93
+	0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40, // 94
+	0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, // 95
+	0x08, 0x00, 0x10, // 96
+	0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03, // 97
+	0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 98
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01, // 99
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03, // 100
+	0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02, // 101
+	0x20, 0x00, 0xF0, 0x03, 0x28, // 102
+	0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07, // 103
+	0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 104
+	0x00, 0x00, 0xE8, 0x03, // 105
+	0x00, 0x08, 0xE8, 0x07, // 106
+	0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, // 107
+	0x00, 0x00, 0xF8, 0x03, // 108
+	0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 109
+	0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 110
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 111
+	0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 112
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F, // 113
+	0x00, 0x00, 0xE0, 0x03, 0x20, // 114
+	0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01, // 115
+	0x20, 0x00, 0xF8, 0x03, 0x20, 0x02, // 116
+	0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, // 117
+	0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, // 118
+	0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01, // 119
+	0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 120
+	0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20, // 121
+	0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02, // 122
+	0x80, 0x00, 0x78, 0x0F, 0x08, 0x08, // 123
+	0x00, 0x00, 0xF8, 0x0F, // 124
+	0x08, 0x08, 0x78, 0x0F, 0x80, // 125
+	0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0, // 126
+	0x00, 0x00, 0xA0, 0x0F, // 161
+	0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01, // 162
+	0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02, // 163
+	0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01, // 164
+	0x48, 0x01, 0x70, 0x01, 0xC0, 0x03, 0x70, 0x01, 0x48, 0x01, // 165
+	0x00, 0x00, 0x38, 0x0F, // 166
+	0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05, // 167
+	0x00, 0x00, 0xE0, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0x20, 0x02, // 168
+	0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0, // 169
+	0x68, 0x00, 0x68, 0x00, 0x68, 0x00, 0x78, // 170
+	0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02, // 171
+	0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, // 172
+	0x80, 0x00, 0x80, // 173
+	0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0, // 174
+	0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, // 175
+	0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38, // 176
+	0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02, // 177
+	0x48, 0x00, 0x68, 0x00, 0x58, // 178
+	0x48, 0x00, 0x58, 0x00, 0x68, // 179
+	0x00, 0x00, 0x10, 0x00, 0x08, // 180
+	0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, // 181
+	0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08, // 182
+	0x00, 0x00, 0x40, // 183
+	0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0xC0, // 184
+	0x00, 0x00, 0xF0, 0x03, 0x40, 0x00, 0x80, 0x00, 0xF8, 0x03, 0x08, // 185
+	0x30, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 186
+	0x00, 0x00, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, // 187
+	0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0xC0, 0x00, 0x20, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 188
+	0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02, // 189
+	0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 190
+	0x00, 0x00, 0x00, 0x06, 0x00, 0x09, 0xA0, 0x09, 0x00, 0x04, // 191
+	0x00, 0x00, 0xF0, 0x03, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x03, // 192
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x88, 0x01, // 193
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 194
+	0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x18, // 195
+	0x00, 0x00, 0x00, 0x02, 0xFC, 0x03, 0x04, 0x02, 0xFC, 0x03, 0x00, 0x02, // 196
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x08, 0x02, // 197
+	0x00, 0x00, 0xB8, 0x03, 0x40, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xB8, 0x03, // 198
+	0x00, 0x00, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 199
+	0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x40, 0x00, 0x20, 0x00, 0xF8, 0x03, // 200
+	0x00, 0x00, 0xE0, 0x03, 0x08, 0x01, 0x90, 0x00, 0x48, 0x00, 0xE0, 0x03, // 201
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xA0, 0x00, 0x10, 0x01, 0x08, 0x02, // 202
+	0x00, 0x00, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 203
+	0x00, 0x00, 0xF8, 0x03, 0x10, 0x00, 0x60, 0x00, 0x10, 0x00, 0xF8, 0x03, // 204
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 205
+	0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 206
+	0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 207
+	0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 208
+	0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, // 209
+	0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, // 210
+	0x00, 0x00, 0x38, 0x00, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0xF8, 0x01, // 211
+	0x00, 0x00, 0x70, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x88, 0x00, 0x70, // 212
+	0x00, 0x00, 0x18, 0x03, 0xA0, 0x00, 0x40, 0x00, 0xA0, 0x00, 0x18, 0x03, // 213
+	0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, // 214
+	0x00, 0x00, 0x38, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 215
+	0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, // 216
+	0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x06, // 217
+	0x00, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 218
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, 0xF8, 0x03, // 219
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 220
+	0x00, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01, // 221
+	0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xF0, 0x01, 0x08, 0x02, 0xF0, 0x01, // 222
+	0x00, 0x00, 0x30, 0x02, 0x48, 0x01, 0xC8, 0x00, 0x48, 0x00, 0xF8, 0x03, // 223
+	0x00, 0x00, 0x00, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x03, // 224
+	0x00, 0x00, 0xE0, 0x01, 0x50, 0x02, 0x50, 0x02, 0x48, 0x02, 0x88, 0x01, // 225
+	0x00, 0x00, 0xE0, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 226
+	0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x60, // 227
+	0x00, 0x00, 0x00, 0x02, 0xC0, 0x03, 0x20, 0x02, 0xE0, 0x03, 0x00, 0x02, // 228
+	0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, // 229
+	0x00, 0x00, 0x60, 0x03, 0x80, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x60, 0x03, // 230
+	0x00, 0x00, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 231
+	0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 232
+	0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x98, 0x00, 0x40, 0x00, 0xE0, 0x03, // 233
+	0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 234
+	0x00, 0x00, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, // 235
+	0x00, 0x00, 0xE0, 0x03, 0x40, 0x00, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 236
+	0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 237
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 238
+	0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, // 239
+	0x00, 0x00, 0xE0, 0x03, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x40, // 240
+	0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0x40, 0x02, // 241
+	0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, // 242
+	0x00, 0x00, 0x60, 0x00, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0xE0, 0x01, // 243
+	0x00, 0x00, 0xC0, 0x00, 0x20, 0x01, 0xE0, 0x03, 0x20, 0x01, 0xC0, // 244
+	0x00, 0x00, 0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 245
+	0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, // 246
+	0x00, 0x00, 0x60, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 247
+	0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, // 248
+	0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x06, // 249
+	0x00, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, // 250
+	0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, 0xE0, 0x03, // 251
+	0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, // 252
+	0x00, 0x00, 0x40, 0x01, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, // 253
+	0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, 0xC0, 0x01, // 254
+	0x00, 0x00, 0x40, 0x02, 0xA0, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0xE0, 0x03, // 255
+};

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -0,0 +1,11 @@
+#ifndef OLEDDISPLAYFONTSRU_h
+#define OLEDDISPLAYFONTSRU_h
+
+#ifdef ARDUINO
+#include <Arduino.h>
+#elif __MBED__
+#define PROGMEM
+#endif
+
+extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
+#endif

src/input/InputBroker.h

@@ -1,9 +1,13 @@
 #pragma once
 #include "Observer.h"
 
+#define ANYKEY 0xFF
+#define MATRIXKEY 0xFE
+
 typedef struct _InputEvent {
     const char* source;
     char inputEvent;
+    char kbchar;
 } InputEvent;
 class InputBroker :
     public Observable<const InputEvent *>

src/input/RotaryEncoderInterruptBase.cpp

@@ -34,7 +34,7 @@ void RotaryEncoderInterruptBase::init(
 int32_t RotaryEncoderInterruptBase::runOnce()
 {
     InputEvent e;
-    e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
+    e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
     e.source = this->_originName;
 
     if (this->action == ROTARY_ACTION_PRESSED) {
@@ -48,7 +48,7 @@ int32_t RotaryEncoderInterruptBase::runOnce()
         e.inputEvent = this->_eventCcw;
     }
 
-    if (e.inputEvent != ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE) {
+    if (e.inputEvent != ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
         this->notifyObservers(&e);
     }
 

src/input/RotaryEncoderInterruptBase.h

@@ -33,8 +33,8 @@ class RotaryEncoderInterruptBase : public Observable<const InputEvent *>, privat
   private:
     uint8_t _pinA = 0;
     uint8_t _pinB = 0;
-    char _eventCw = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
-    char _eventCcw = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
-    char _eventPressed = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
+    char _eventCw = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventCcw = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventPressed = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
     const char *_originName;
 };

src/input/UpDownInterruptBase.h

@@ -16,8 +16,8 @@ class UpDownInterruptBase : public Observable<const InputEvent *>
   private:
     uint8_t _pinDown = 0;
     uint8_t _pinUp = 0;
-    char _eventDown = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
-    char _eventUp = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
-    char _eventPressed = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
+    char _eventDown = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventUp = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+    char _eventPressed = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
     const char *_originName;
 };

src/input/UpDownInterruptImpl1.cpp

@@ -17,9 +17,9 @@ void UpDownInterruptImpl1::init()
     uint8_t pinDown = moduleConfig.canned_message.inputbroker_pin_b;
     uint8_t pinPress = moduleConfig.canned_message.inputbroker_pin_press;
 
-    char eventDown = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_KEY_DOWN);
-    char eventUp = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_KEY_UP);
-    char eventPressed = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_KEY_SELECT);
+    char eventDown = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_DOWN);
+    char eventUp = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_UP);
+    char eventPressed = static_cast<char>(ModuleConfig_CannedMessageConfig_InputEventChar_SELECT);
 
     UpDownInterruptBase::init(pinDown, pinUp, pinPress, eventDown, eventUp, eventPressed, UpDownInterruptImpl1::handleIntDown,
                               UpDownInterruptImpl1::handleIntUp, UpDownInterruptImpl1::handleIntPressed);

src/input/cardKbI2cImpl.cpp

@@ -16,6 +16,5 @@ void CardKbI2cImpl::init()
         return;
     }
 
-    DEBUG_MSG("registerSource\n");
     inputBroker->registerSource(this);
 }

src/input/facesKbI2cImpl.cpp

@@ -1,20 +0,0 @@
-#include "facesKbI2cImpl.h"
-#include "InputBroker.h"
-
-FacesKbI2cImpl *facesKbI2cImpl;
-
-FacesKbI2cImpl::FacesKbI2cImpl() :
-    KbI2cBase("facesKB")
-{
-}
-
-void FacesKbI2cImpl::init()
-{
-    if (faceskb_found != FACESKB_ADDR)
-    {
-        // Input device is not detected.
-        return;
-    }
-
-    inputBroker->registerSource(this);
-}

src/input/facesKbI2cImpl.h

@@ -1,20 +0,0 @@
-#pragma once
-#include "kbI2cBase.h"
-#include "main.h"
-
-/**
- * @brief The idea behind this class to have static methods for the event handlers.
- *      Check attachInterrupt() at RotaryEncoderInteruptBase.cpp
- *      Technically you can have as many rotary encoders hardver attached
- *      to your device as you wish, but you always need to have separate event
- *      handlers, thus you need to have a RotaryEncoderInterrupt implementation.
- */
-class FacesKbI2cImpl :
-    public KbI2cBase
-{
-  public:
-    FacesKbI2cImpl();
-    void init();
-};
-
-extern FacesKbI2cImpl *facesKbI2cImpl;

src/input/kbI2cBase.cpp

@@ -2,48 +2,114 @@
 #include "configuration.h"
 #include <Wire.h>
 
+extern uint8_t cardkb_found;
+extern uint8_t kb_model;
+
 KbI2cBase::KbI2cBase(const char *name) : concurrency::OSThread(name)
 {
     this->_originName = name;
 }
 
+uint8_t read_from_14004(uint8_t reg, uint8_t *data, uint8_t length)
+{
+  uint8_t readflag = 0;
+  Wire.beginTransmission(CARDKB_ADDR);
+  Wire.write(reg);
+  Wire.endTransmission();    // stop transmitting
+  delay(20);
+  Wire.requestFrom(CARDKB_ADDR, (int)length);
+  int i = 0;
+  while ( Wire.available() ) // slave may send less than requested
+  {
+    data[i++] = Wire.read(); // receive a byte as a proper uint8_t
+    readflag = 1;
+  }
+  return readflag;
+}
+
+void write_to_14004(uint8_t reg, uint8_t data)
+{
+  Wire.beginTransmission(CARDKB_ADDR);
+  Wire.write(reg);
+  Wire.write(data);
+  Wire.endTransmission();    // stop transmitting
+}
+
 int32_t KbI2cBase::runOnce()
 {
-    InputEvent e;
-    e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE;
-    e.source = this->_originName;
-
-    Wire.requestFrom(CARDKB_ADDR, 1);
-
-    while (Wire.available()) {
-        char c = Wire.read();
-        switch (c) {
-        case 0x1b: // ESC
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_CANCEL;
-            break;
-        case 0x08: // Back
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_BACK;
-            break;
-        case 0xb5: // Up
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_UP;
-            break;
-        case 0xb6: // Down
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_DOWN;
-            break;
-        case 0xb4: // Left
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_LEFT;
-            break;
-        case 0xb7: // Right
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_RIGHT;
-            break;
-        case 0x0d: // Enter
-            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_KEY_SELECT;
-            break;
-        }
+    if (cardkb_found != CARDKB_ADDR){
+        // Input device is not detected.
+        return INT32_MAX;
     }
 
-    if (e.inputEvent != ModuleConfig_CannedMessageConfig_InputEventChar_KEY_NONE) {
-        this->notifyObservers(&e);
+    if (kb_model == 0x02) {
+        // RAK14004
+        uint8_t rDataBuf[8] = {0};
+        uint8_t PrintDataBuf = 0;
+        if (read_from_14004(0x01, rDataBuf, 0x04) == 1) {
+            for (uint8_t aCount = 0; aCount < 0x04; aCount++) {
+                for (uint8_t bCount = 0; bCount < 0x04; bCount++ ) {
+                    if (((rDataBuf[aCount] >> bCount) & 0x01) == 0x01) {
+                        PrintDataBuf = aCount * 0x04 + bCount + 1;
+                    }
+                }
+            }
+        }
+        if (PrintDataBuf != 0) {
+            DEBUG_MSG("RAK14004 key 0x%x pressed\n", PrintDataBuf);
+            InputEvent e;
+            e.inputEvent = MATRIXKEY;
+            e.source = this->_originName;
+            e.kbchar = PrintDataBuf;
+            this->notifyObservers(&e);
+        }
+    } else {
+        // m5 cardkb
+        Wire.requestFrom(CARDKB_ADDR, 1);
+
+        while (Wire.available()) {
+            char c = Wire.read();
+            InputEvent e;
+            e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+            e.source = this->_originName;
+            switch (c) {
+            case 0x1b: // ESC
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
+                break;
+            case 0x08: // Back
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_BACK;
+                e.kbchar = c;
+                break;
+            case 0xb5: // Up
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_UP;
+                break;
+            case 0xb6: // Down
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
+                break;
+            case 0xb4: // Left
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
+                e.kbchar = c;
+                break;
+            case 0xb7: // Right
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
+                e.kbchar = c;
+                break;
+            case 0x0d: // Enter
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
+                break;
+            case 0x00: //nopress
+                e.inputEvent = ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+                break;
+            default: // all other keys
+                e.inputEvent = ANYKEY;
+                e.kbchar = c;
+                break;
+            }
+
+            if (e.inputEvent != ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
+                this->notifyObservers(&e);
+            }
+        }
     }
     return 500;
 }

src/main.cpp

@@ -17,9 +17,9 @@
 #include "SPILock.h"
 #include "concurrency/OSThread.h"
 #include "concurrency/Periodic.h"
-#include "debug/axpDebug.h"
-#include "debug/einkScan.h"
-#include "debug/i2cScan.h"
+#include "detect/axpDebug.h"
+#include "detect/einkScan.h"
+#include "detect/i2cScan.h"
 #include "graphics/Screen.h"
 #include "main.h"
 #include "modules/Modules.h"
@@ -31,18 +31,12 @@
 
 #include "mesh/http/WiFiAPClient.h"
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "mesh/http/WebServer.h"
-
-#ifdef USE_NEW_ESP32_BLUETOOTH
-#include "esp32/ESP32Bluetooth.h"
-#else
-#include "nimble/BluetoothUtil.h"
+#include "nimble/NimbleBluetooth.h"
 #endif
 
-#endif
-
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI || defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiServerAPI.h"
 #include "mqtt/MQTT.h"
 #endif
@@ -51,8 +45,14 @@
 #include "RF95Interface.h"
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
+#include "SX1281Interface.h"
+#if !HAS_RADIO && defined(ARCH_PORTDUINO)
+#include "platform/portduino/SimRadio.h"
+#endif
 
+#if HAS_BUTTON
 #include "ButtonThread.h"
+#endif
 #include "PowerFSMThread.h"
 
 using namespace concurrency;
@@ -78,20 +78,25 @@ uint8_t cardkb_found;
 // 0x02 for RAK14004 and 0x00 for cardkb
 uint8_t kb_model;
 
-// The I2C address of the Faces Keyboard (if found)
-uint8_t faceskb_found;
-
 // The I2C address of the RTC Module (if found)
 uint8_t rtc_found;
 
+bool rIf_wide_lora = false;
+
+// Keystore Chips
+uint8_t keystore_found;
+#ifndef ARCH_PORTDUINO
+ATECCX08A atecc;
+#endif
+
 bool eink_found = true;
 
 uint32_t serialSinceMsec;
 
-bool axp192_found;
+bool pmu_found;
 
 // Array map of sensor types (as array index) and i2c address as value we'll find in the i2c scan
-uint8_t nodeTelemetrySensorsMap[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+uint8_t nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658+1] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
 
 Router *router = NULL; // Users of router don't care what sort of subclass implements that API
 
@@ -126,11 +131,15 @@ static int32_t ledBlinker()
 
 uint32_t timeLastPowered = 0;
 
+#if HAS_BUTTON
 bool ButtonThread::shutdown_on_long_stop = false;
+#endif
 
 static Periodic *ledPeriodic;
 static OSThread *powerFSMthread, *buttonThread;
+#if HAS_BUTTON
 uint32_t ButtonThread::longPressTime = 0;
+#endif
 
 RadioInterface *rIf = NULL;
 
@@ -157,9 +166,7 @@ void setup()
 #endif
 
 #ifdef DEBUG_PORT
-    if (!config.device.serial_disabled) {
         consoleInit(); // Set serial baud rate and init our mesh console
-    }
 #endif
 
     serialSinceMsec = millis();
@@ -187,7 +194,7 @@ void setup()
     bool forceSoftAP = 0;
 
 #ifdef BUTTON_PIN
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 
     // If the button is connected to GPIO 12, don't enable the ability to use
     // meshtasticAdmin on the device.
@@ -216,9 +223,13 @@ void setup()
     // router = new DSRRouter();
     router = new ReliableRouter();
 
+#ifdef I2C_SDA1
+    Wire1.begin(I2C_SDA1, I2C_SCL1);
+#endif
+
 #ifdef I2C_SDA
     Wire.begin(I2C_SDA, I2C_SCL);
-#elif !defined(NO_WIRE)
+#elif HAS_WIRE
     Wire.begin();
 #endif
 
@@ -231,13 +242,16 @@ void setup()
     delay(1);
 #endif
 
+    // We need to scan here to decide if we have a screen for nodeDB.init()
     scanI2Cdevice();
 #ifdef RAK4630
     // scanEInkDevice();
 #endif
 
+#if HAS_BUTTON
     // Buttons & LED
     buttonThread = new ButtonThread();
+#endif
 
 #ifdef LED_PIN
     pinMode(LED_PIN, OUTPUT);
@@ -247,7 +261,7 @@ void setup()
     // Hello
     DEBUG_MSG("Meshtastic hwvendor=%d, swver=%s\n", HW_VENDOR, optstr(APP_VERSION));
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // Don't init display if we don't have one or we are waking headless due to a timer event
     if (wakeCause == ESP_SLEEP_WAKEUP_TIMER)
         screen_found = 0; // forget we even have the hardware
@@ -255,7 +269,7 @@ void setup()
     esp32Setup();
 #endif
 
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     nrf52Setup();
 #endif
     playStartMelody();
@@ -269,9 +283,15 @@ void setup()
     powerStatus->observe(&power->newStatus);
     power->setup(); // Must be after status handler is installed, so that handler gets notified of the initial configuration
 
+    /*
+    * Repeat the scanning for I2C devices after power initialization or look for 'latecomers'. 
+    * Boards with an PMU need to be powered on to correctly scan to the device address, such as t-beam-s3-core
+    */
+    scanI2Cdevice();
+    
     // Init our SPI controller (must be before screen and lora)
     initSPI();
-#ifdef NO_ESP32
+#ifndef ARCH_ESP32
     SPI.begin();
 #else
     // ESP32
@@ -299,14 +319,14 @@ void setup()
     setupModules();
 
     // Do this after service.init (because that clears error_code)
-#ifdef AXP192_SLAVE_ADDRESS
-    if (!axp192_found)
-        RECORD_CRITICALERROR(CriticalErrorCode_NoAXP192); // Record a hardware fault for missing hardware
+#ifdef HAS_PMU
+    if (!pmu_found)
+        RECORD_CRITICALERROR(CriticalErrorCode_NO_AXP192); // Record a hardware fault for missing hardware
 #endif
 
         // Don't call screen setup until after nodedb is setup (because we need
         // the current region name)
-#if defined(ST7735_CS) || defined(HAS_EINK) || defined(ILI9341_DRIVER)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
     screen->setup();
 #else
     if (screen_found)
@@ -322,7 +342,7 @@ void setup()
         DEBUG_MSG("GPS FactoryReset requested\n");
         if (gps->factoryReset()) { // If we don't succeed try again next time
             devicestate.did_gps_reset = true;
-            nodeDB.saveToDisk();
+            nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
         }
     }
 
@@ -347,6 +367,20 @@ void setup()
     }
 #endif
 
+#if defined(USE_SX1281) && !defined(ARCH_PORTDUINO)
+    if (!rIf) {
+        rIf = new SX1281Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
+        if (!rIf->init()) {
+            DEBUG_MSG("Warning: Failed to find SX1281 radio\n");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            DEBUG_MSG("SX1281 Radio init succeeded, using SX1281 radio\n");
+            rIf_wide_lora = true;
+        }
+    }
+#endif
+
 #if defined(USE_SX1262)
     if (!rIf) {
         rIf = new SX1262Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
@@ -386,7 +420,7 @@ void setup()
     }
 #endif
 
-#ifdef USE_SIM_RADIO
+#ifdef ARCH_PORTDUINO
     if (!rIf) {
         rIf = new SimRadio;
         if (!rIf->init()) {
@@ -399,27 +433,27 @@ void setup()
     }
 #endif
 
-#if defined(PORTDUINO) || defined(HAS_WIFI)
+#if HAS_WIFI
     mqttInit();
 #endif
 
     // Initialize Wifi
     initWifi(forceSoftAP);
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // Start web server thread.
     webServerThread = new WebServerThread();
 #endif
 
-#ifdef PORTDUINO
-    initApiServer();
+#ifdef ARCH_PORTDUINO
+    initApiServer(TCPPort);
 #endif
 
     // Start airtime logger thread.
     airTime = new AirTime();
 
     if (!rIf)
-        RECORD_CRITICALERROR(CriticalErrorCode_NoRadio);
+        RECORD_CRITICALERROR(CriticalErrorCode_NO_RADIO);
     else {
         router->addInterface(rIf);
 
@@ -452,10 +486,10 @@ void loop()
 
     // heap_caps_check_integrity_all(true); // FIXME - disable this expensive check
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     esp32Loop();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     nrf52Loop();
 #endif
     powerCommandsCheck();

src/main.h

@@ -6,20 +6,30 @@
 #include "PowerStatus.h"
 #include "graphics/Screen.h"
 #include "mesh/generated/telemetry.pb.h"
+#ifndef ARCH_PORTDUINO
+#include <SparkFun_ATECCX08a_Arduino_Library.h>
+#endif
 
 extern uint8_t screen_found;
 extern uint8_t screen_model;
 extern uint8_t cardkb_found;
 extern uint8_t kb_model;
-extern uint8_t faceskb_found;
 extern uint8_t rtc_found;
+extern uint8_t keystore_found;
 
+extern bool rIf_wide_lora;
 extern bool eink_found;
-extern bool axp192_found;
+extern bool pmu_found;
 extern bool isCharging;
 extern bool isUSBPowered;
 
-extern uint8_t nodeTelemetrySensorsMap[12];
+#ifndef ARCH_PORTDUINO
+extern ATECCX08A atecc;
+#endif
+
+extern uint8_t nodeTelemetrySensorsMap[TelemetrySensorType_QMI8658+1];
+
+extern int TCPPort; // set by Portduino
 
 // Global Screen singleton.
 extern graphics::Screen *screen;

src/mesh/Channels.cpp

@@ -62,13 +62,6 @@ Channel &Channels::fixupChannel(ChannelIndex chIndex)
         // Convert the old string "Default" to our new short representation
         if (strcmp(channelSettings.name, "Default") == 0)
             *channelSettings.name = '\0';
-
-        /* Convert any old usage of the defaultpsk into our new short representation.
-        if (channelSettings.psk.size == sizeof(defaultpsk) &&
-            memcmp(channelSettings.psk.bytes, defaultpsk, sizeof(defaultpsk)) == 0) {
-            *channelSettings.psk.bytes = 1;
-            channelSettings.psk.size = 1;
-        } */
     }
 
     hashes[chIndex] = generateHash(chIndex);
@@ -85,7 +78,7 @@ void Channels::initDefaultChannel(ChannelIndex chIndex)
     ChannelSettings &channelSettings = ch.settings;
     Config_LoRaConfig &loraConfig = config.lora;
 
-    loraConfig.modem_preset = Config_LoRaConfig_ModemPreset_LongFast; // Default to Long Range & Fast
+    loraConfig.modem_preset = Config_LoRaConfig_ModemPreset_LONG_FAST; // Default to Long Range & Fast
 
     loraConfig.tx_power = 0; // default
     uint8_t defaultpskIndex = 1;
@@ -124,7 +117,22 @@ CryptoKey Channels::getKey(ChannelIndex chIndex)
             DEBUG_MSG("Expanding short PSK #%d\n", pskIndex);
             if (pskIndex == 0)
                 k.length = 0; // Turn off encryption
-            else {
+            else if (oemStore.oem_aes_key.size > 1) {
+                // Use the OEM key
+                DEBUG_MSG("Using OEM Key with %d bytes\n", oemStore.oem_aes_key.size);
+                memcpy(k.bytes, oemStore.oem_aes_key.bytes , oemStore.oem_aes_key.size);
+                k.length = oemStore.oem_aes_key.size;
+                // Bump up the last byte of PSK as needed
+                uint8_t *last = k.bytes + oemStore.oem_aes_key.size - 1;
+                *last = *last + pskIndex - 1; // index of 1 means no change vs defaultPSK
+                if (k.length < 16) {
+                    DEBUG_MSG("Warning: OEM provided a too short AES128 key - padding\n");
+                    k.length = 16;
+                } else if (k.length < 32 && k.length != 16) {
+                    DEBUG_MSG("Warning: OEM provided a too short AES256 key - padding\n");
+                    k.length = 32;
+                }
+            } else {
                 memcpy(k.bytes, defaultpsk, sizeof(defaultpsk));
                 k.length = sizeof(defaultpsk);
                 // Bump up the last byte of PSK as needed
@@ -214,26 +222,26 @@ const char *Channels::getName(size_t chIndex)
             channelName = "Custom";
         else
             switch (config.lora.modem_preset) {
-            case Config_LoRaConfig_ModemPreset_ShortSlow:
-                channelName = "ShortS";
+            case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+                channelName = "ShortSlow";
                 break;
-            case Config_LoRaConfig_ModemPreset_ShortFast:
-                channelName = "ShortF";
+            case Config_LoRaConfig_ModemPreset_SHORT_FAST:
+                channelName = "ShortFast";
                 break;
-            case Config_LoRaConfig_ModemPreset_MedSlow:
-                channelName = "MedS";
+            case Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+                channelName = "MediumSlow";
                 break;
-            case Config_LoRaConfig_ModemPreset_MedFast:
-                channelName = "MedF";
+            case Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+                channelName = "MediumFast";
                 break;
-            case Config_LoRaConfig_ModemPreset_LongSlow:
-                channelName = "LongS";
+            case Config_LoRaConfig_ModemPreset_LONG_SLOW:
+                channelName = "LongSlow";
                 break;
-            case Config_LoRaConfig_ModemPreset_LongFast:
-                channelName = "LongF";
+            case Config_LoRaConfig_ModemPreset_LONG_FAST:
+                channelName = "LongFast";
                 break;
-            case Config_LoRaConfig_ModemPreset_VLongSlow:
-                channelName = "VeryL";
+            case Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+                channelName = "VLongSlow";
                 break;
             default:
                 channelName = "Invalid";

src/mesh/FloodingRouter.cpp

@@ -29,10 +29,14 @@ bool FloodingRouter::shouldFilterReceived(MeshPacket *p)
 
 void FloodingRouter::sniffReceived(const MeshPacket *p, const Routing *c)
 {
-
-    if ((p->to == NODENUM_BROADCAST) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
+    PacketId ackId = ((c && c->error_reason == Routing_Error_NONE) || !c) ? p->decoded.request_id : 0;
+    if (ackId && p->to != getNodeNum()) {
+        // do not flood direct message that is ACKed 
+        DEBUG_MSG("Receiving an ACK not for me, but don't need to rebroadcast this direct message anymore.\n");
+        Router::cancelSending(p->to, p->decoded.request_id);   // cancel rebroadcast for this DM
+    } else if ((p->to != getNodeNum()) && (p->hop_limit > 0) && (getFrom(p) != getNodeNum())) {
         if (p->id != 0) {
-            if (config.device.role != Config_DeviceConfig_Role_ClientMute) {
+            if (config.device.role != Config_DeviceConfig_Role_CLIENT_MUTE) {
                 MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
 
                 tosend->hop_limit--; // bump down the hop count

src/mesh/InterfacesTemplates.cpp

@@ -1,7 +1,13 @@
 #include "SX126xInterface.h"
 #include "SX126xInterface.cpp"
+#include "SX128xInterface.h"
+#include "SX128xInterface.cpp"
 
 // We need this declaration for proper linking in derived classes
 template class SX126xInterface<SX1262>;
 template class SX126xInterface<SX1268>;
-template class SX126xInterface<LLCC68>;
+template class SX126xInterface<LLCC68>;
+
+#if !defined(ARCH_PORTDUINO)
+template class SX128xInterface<SX1281>;
+#endif

src/mesh/MeshModule.cpp

@@ -72,7 +72,7 @@ void MeshModule::callPlugins(const MeshPacket &mp, RxSource src)
     bool moduleFound = false;
 
     // We now allow **encrypted** packets to pass through the modules
-    bool isDecoded = mp.which_payloadVariant == MeshPacket_decoded_tag;
+    bool isDecoded = mp.which_payload_variant == MeshPacket_decoded_tag;
 
     currentReply = NULL; // No reply yet
 
@@ -112,7 +112,7 @@ void MeshModule::callPlugins(const MeshPacket &mp, RxSource src)
             bool rxChannelOk = !pi.boundChannel || (mp.from == 0) ||
                 !ch ||
                 strlen(ch->settings.name) > 0 ||
-                strcmp(ch->settings.name, pi.boundChannel);
+                (strcasecmp(ch->settings.name, pi.boundChannel) == 0);
 
             if (!rxChannelOk) {
                 // no one should have already replied!
@@ -211,7 +211,7 @@ void MeshModule::sendResponse(const MeshPacket &req)
  */
 void setReplyTo(MeshPacket *p, const MeshPacket &to)
 {
-    assert(p->which_payloadVariant == MeshPacket_decoded_tag); // Should already be set by now
+    assert(p->which_payload_variant == MeshPacket_decoded_tag); // Should already be set by now
     p->to = getFrom(&to);    // Make sure that if we are sending to the local node, we use our local node addr, not 0
     p->channel = to.channel; // Use the same channel that the request came in on
 
@@ -266,7 +266,7 @@ AdminMessageHandleResult MeshModule::handleAdminMessageForAllPlugins(const MeshP
                 // In case we have a response it always has priority.
                 DEBUG_MSG("Reply prepared by module '%s' of variant: %d\n",
                     pi.name,
-                    response->which_variant);
+                    response->which_payload_variant);
                 handled = h;
             }
             else if ((handled != AdminMessageHandleResult::HANDLED_WITH_RESPONSE) &&

src/mesh/MeshModule.h

@@ -4,7 +4,7 @@
 #include "mesh/MeshTypes.h"
 #include <vector>
 
-#ifndef NO_SCREEN
+#if HAS_SCREEN
 #include <OLEDDisplay.h>
 #include <OLEDDisplayUi.h>
 #endif
@@ -72,7 +72,7 @@ class MeshModule
     static void observeUIEvents(Observer<const UIFrameEvent *> *observer);
     static AdminMessageHandleResult handleAdminMessageForAllPlugins(
         const MeshPacket &mp, AdminMessage *request, AdminMessage *response);
-#ifndef NO_SCREEN
+#if HAS_SCREEN
     virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) { return; }
 #endif
   protected:

src/mesh/MeshRadio.h

@@ -15,6 +15,7 @@ struct RegionInfo {
     uint8_t powerLimit; // Or zero for not set
     bool audioPermitted;
     bool freqSwitching;
+    bool wideLora;
     const char *name; // EU433 etc
 };
 

src/mesh/MeshService.cpp

@@ -16,6 +16,10 @@
 #include "modules/PositionModule.h"
 #include "power.h"
 
+#ifdef ARCH_ESP32
+#include "nimble/NimbleBluetooth.h"
+#endif
+
 /*
 receivedPacketQueue - this is a queue of messages we've received from the mesh, which we are keeping to deliver to the phone.
 It is implemented with a FreeRTos queue (wrapped with a little RTQueue class) of pointers to MeshPacket protobufs (which were
@@ -86,7 +90,7 @@ void MeshService::loop()
 }
 
 /// The radioConfig object just changed, call this to force the hw to change to the new settings
-bool MeshService::reloadConfig()
+bool MeshService::reloadConfig(int saveWhat)
 {
     // If we can successfully set this radio to these settings, save them to disk
 
@@ -94,7 +98,7 @@ bool MeshService::reloadConfig()
     bool didReset = nodeDB.resetRadioConfig(); // Don't let the phone send us fatally bad settings
 
     configChanged.notifyObservers(NULL); // This will cause radio hardware to change freqs etc
-    nodeDB.saveToDisk();
+    nodeDB.saveToDisk(saveWhat);
 
     return didReset;
 }
@@ -109,7 +113,7 @@ void MeshService::reloadOwner()
     // update everyone else
     if (nodeInfoModule)
         nodeInfoModule->sendOurNodeInfo();
-    nodeDB.saveToDisk();
+    nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
 }
 
 /**
@@ -119,6 +123,29 @@ void MeshService::reloadOwner()
  */
 void MeshService::handleToRadio(MeshPacket &p)
 {
+    #ifdef ARCH_PORTDUINO    
+    // Simulates device is receiving a packet via the LoRa chip
+    if (p.decoded.portnum == PortNum_SIMULATOR_APP) {
+        // Simulator packet (=Compressed packet) is encapsulated in a MeshPacket, so need to unwrap first
+        Compressed scratch;
+        Compressed *decoded = NULL;
+        if (p.which_payload_variant == MeshPacket_decoded_tag) {
+            memset(&scratch, 0, sizeof(scratch));
+            p.decoded.payload.size = pb_decode_from_bytes(p.decoded.payload.bytes, p.decoded.payload.size, &Compressed_msg, &scratch);
+            if (p.decoded.payload.size) {
+                decoded = &scratch;
+                // Extract the original payload and replace
+                memcpy(&p.decoded.payload, &decoded->data, sizeof(decoded->data));
+                // Switch the port from PortNum_SIMULATOR_APP back to the original PortNum 
+                p.decoded.portnum = decoded->portnum;
+            } else
+                DEBUG_MSG("Error decoding protobuf for simulator message!\n");
+        }
+        // Let SimRadio receive as if it did via its LoRa chip
+        SimRadio::instance->startReceive(&p); 
+        return; 
+    }
+    #endif
     if (p.from != 0) { // We don't let phones assign nodenums to their sent messages
         DEBUG_MSG("Warning: phone tried to pick a nodenum, we don't allow that.\n");
         p.from = 0;
@@ -168,7 +195,7 @@ void MeshService::sendNetworkPing(NodeNum dest, bool wantReplies)
     NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
     assert(node);
 
-    if (node->has_position) {
+    if (node->has_position && (node->position.latitude_i != 0 || node->position.longitude_i != 0)) {
         if (positionModule) {
             DEBUG_MSG("Sending position ping to 0x%x, wantReplies=%d\n", dest, wantReplies);
             positionModule->sendOurPosition(dest, wantReplies);
@@ -248,7 +275,7 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
     pos.time = getValidTime(RTCQualityGPS);
 
     // In debug logs, identify position by @timestamp:stage (stage 4 = nodeDB)
-    DEBUG_MSG("onGPSChanged() pos@%x, time=%u, lat=%d, lon=%d, alt=%d\n", pos.pos_timestamp, pos.time, pos.latitude_i,
+    DEBUG_MSG("onGPSChanged() pos@%x, time=%u, lat=%d, lon=%d, alt=%d\n", pos.timestamp, pos.time, pos.latitude_i,
               pos.longitude_i, pos.altitude);
 
     // Update our current position in the local DB
@@ -256,3 +283,8 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus)
 
     return 0;
 }
+
+bool MeshService::isToPhoneQueueEmpty() 
+{
+    return toPhoneQueue.isEmpty();
+}

src/mesh/MeshService.h

@@ -10,6 +10,9 @@
 #include "MeshTypes.h"
 #include "Observer.h"
 #include "PointerQueue.h"
+#ifdef ARCH_PORTDUINO
+#include "../platform/portduino/SimRadio.h"
+#endif
 
 /**
  * Top level app for this service.  keeps the mesh, the radio config and the queue of received packets.
@@ -63,7 +66,7 @@ class MeshService
     /** The radioConfig object just changed, call this to force the hw to change to the new settings
      * @return true if client devices should be sent a new set of radio configs
      */
-    bool reloadConfig();
+    bool reloadConfig(int saveWhat=SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS);
 
     /// The owner User record just got updated, update our node DB and broadcast the info into the mesh
     void reloadOwner();
@@ -86,6 +89,8 @@ class MeshService
       /// Send a packet to the phone
     void sendToPhone(MeshPacket *p);
 
+    bool isToPhoneQueueEmpty();
+
   private:
     /// Called when our gps position has changed - updates nodedb and sends Location message out into the mesh
     /// returns 0 to allow futher processing

src/mesh/NodeDB.cpp

@@ -16,15 +16,16 @@
 #include "mesh-pb-constants.h"
 #include <pb_decode.h>
 #include <pb_encode.h>
+#include <ErriezCRC32.h>
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 #include "mesh/http/WiFiAPClient.h"
 #include "modules/esp32/StoreForwardModule.h"
 #include <Preferences.h>
 #include <nvs_flash.h>
 #endif
 
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
 #include <bluefruit.h>
 #include <utility/bonding.h>
 #endif
@@ -37,20 +38,13 @@ MyNodeInfo &myNodeInfo = devicestate.my_node;
 LocalConfig config;
 LocalModuleConfig moduleConfig;
 ChannelFile channelFile;
+OEMStore oemStore;
 
 /** The current change # for radio settings.  Starts at 0 on boot and any time the radio settings
  * might have changed is incremented.  Allows others to detect they might now be on a new channel.
  */
 uint32_t radioGeneration;
 
-/*
-DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
-#define here.
-*/
-
-#define DEVICESTATE_CUR_VER 13
-#define DEVICESTATE_MIN_VER DEVICESTATE_CUR_VER
-
 // FIXME - move this somewhere else
 extern void getMacAddr(uint8_t *dmac);
 
@@ -81,14 +75,13 @@ NodeNum getFrom(const MeshPacket *p)
     return (p->from == 0) ? nodeDB.getNodeNum() : p->from;
 }
 
-bool NodeDB::resetRadioConfig()
+bool NodeDB::resetRadioConfig(bool factory_reset)
 {
     bool didFactoryReset = false;
 
     radioGeneration++;
 
-    // radioConfig.has_preferences = true;
-    if (config.device.factory_reset) {
+    if (factory_reset) {
        didFactoryReset = factoryReset();
     }
 
@@ -120,6 +113,12 @@ bool NodeDB::resetRadioConfig()
     // Update the global myRegion
     initRegion();
 
+    if (didFactoryReset) {
+        DEBUG_MSG("Rebooting due to factory reset");
+        screen->startRebootScreen();
+        rebootAtMsec = millis() + (5 * 1000);
+    }
+
     return didFactoryReset;
 }
 
@@ -130,13 +129,16 @@ bool NodeDB::factoryReset()
     rmDir("/prefs");
     // second, install default state (this will deal with the duplicate mac address issue)
     installDefaultDeviceState();
-    // third, write to disk
+    installDefaultConfig();
+    installDefaultModuleConfig();
+    installDefaultChannels();
+    // third, write everything to disk
     saveToDisk();
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     // This will erase what's in NVS including ssl keys, persistant variables and ble pairing
     nvs_flash_erase();
 #endif
-#ifdef NRF52_SERIES
+#ifdef ARCH_NRF52
     Bluefruit.begin();
     DEBUG_MSG("Clearing bluetooth bonds!\n");
     bond_print_list(BLE_GAP_ROLE_PERIPH);
@@ -157,15 +159,45 @@ void NodeDB::installDefaultConfig()
     config.has_lora = true;
     config.has_position = true;
     config.has_power = true;
-    config.has_wifi = true;
-
-    config.lora.region = Config_LoRaConfig_RegionCode_Unset;
-    config.lora.modem_preset = Config_LoRaConfig_ModemPreset_LongFast;
+    config.has_network = true;
+    config.has_bluetooth = true;
+    config.lora.tx_enabled = true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
+    config.lora.region = Config_LoRaConfig_RegionCode_UNSET;
+    config.lora.modem_preset = Config_LoRaConfig_ModemPreset_LONG_FAST;
+    config.lora.hop_limit = HOP_RELIABLE;
+    config.position.gps_enabled = true;
+    config.position.position_broadcast_smart_enabled = true;
+    config.device.serial_enabled = true;
     resetRadioConfig();
-    strncpy(config.device.ntp_server, "0.pool.ntp.org", 32);
+    strncpy(config.network.ntp_server, "0.pool.ntp.org", 32);
+    // FIXME: Default to bluetooth capability of platform as default
+    config.bluetooth.enabled = true;
+    config.bluetooth.fixed_pin = defaultBLEPin;
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER)
+    bool hasScreen = true;
+#else
+    bool hasScreen = screen_found;
+#endif
+    config.bluetooth.mode = hasScreen ? Config_BluetoothConfig_PairingMode_RANDOM_PIN : Config_BluetoothConfig_PairingMode_FIXED_PIN;
     // for backward compat, default position flags are ALT+MSL
-    config.position.position_flags =
-        (Config_PositionConfig_PositionFlags_POS_ALTITUDE | Config_PositionConfig_PositionFlags_POS_ALT_MSL);
+    config.position.position_flags = (Config_PositionConfig_PositionFlags_ALTITUDE | Config_PositionConfig_PositionFlags_ALTITUDE_MSL);
+    
+    initConfigIntervals();
+}
+
+void NodeDB::initConfigIntervals() 
+{
+    config.position.gps_update_interval = default_gps_update_interval;
+    config.position.gps_attempt_time = default_gps_attempt_time;
+    config.position.position_broadcast_secs = default_broadcast_interval_secs;
+
+    config.power.ls_secs = default_ls_secs;
+    config.power.mesh_sds_timeout_secs = default_mesh_sds_timeout_secs;
+    config.power.min_wake_secs = default_min_wake_secs;
+    config.power.sds_secs = default_sds_secs;
+    config.power.wait_bluetooth_secs = default_wait_bluetooth_secs;
+    
+    config.display.screen_on_secs = default_screen_on_secs;
 }
 
 void NodeDB::installDefaultModuleConfig()
@@ -180,6 +212,14 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_telemetry = true;
     moduleConfig.has_external_notification = true;
     moduleConfig.has_canned_message = true;
+
+    initModuleConfigIntervals();
+}
+
+void NodeDB::initModuleConfigIntervals() 
+{
+    moduleConfig.telemetry.device_update_interval = default_broadcast_interval_secs;
+    moduleConfig.telemetry.environment_update_interval = default_broadcast_interval_secs;
 }
 
 void NodeDB::installDefaultChannels()
@@ -189,13 +229,20 @@ void NodeDB::installDefaultChannels()
     channelFile.version = DEVICESTATE_CUR_VER;
 }
 
+void NodeDB::resetNodes()
+{
+    devicestate.node_db_count = 0;
+    memset(devicestate.node_db, 0, sizeof(devicestate.node_db));
+    saveDeviceStateToDisk();
+}
+
 void NodeDB::installDefaultDeviceState()
 {
     DEBUG_MSG("Installing default DeviceState\n");
     memset(&devicestate, 0, sizeof(DeviceState));
 
-    *numNodes = 0; // Forget node DB
-
+    *numNodes = 0;
+    
     // init our devicestate with valid flags so protobuf writing/reading will work
     devicestate.has_my_node = true;
     devicestate.has_owner = true;
@@ -223,12 +270,17 @@ void NodeDB::installDefaultDeviceState()
 void NodeDB::init()
 {
     DEBUG_MSG("Initializing NodeDB\n");
-    // saveToDisk();
     loadFromDisk();
 
+    uint32_t devicestateCRC = crc32Buffer(&devicestate, sizeof(devicestate));
+    uint32_t configCRC = crc32Buffer(&config, sizeof(config));
+    uint32_t channelFileCRC = crc32Buffer(&channelFile, sizeof(channelFile));
+
+    int saveWhat = 0;
+
     myNodeInfo.max_channels = MAX_NUM_CHANNELS; // tell others the max # of channels we can understand
 
-    myNodeInfo.error_code = CriticalErrorCode_None; // For the error code, only show values from this boot (discard value from flash)
+    myNodeInfo.error_code = CriticalErrorCode_NONE; // For the error code, only show values from this boot (discard value from flash)
     myNodeInfo.error_address = 0;
 
     // likewise - we always want the app requirements to come from the running appload
@@ -248,7 +300,7 @@ void NodeDB::init()
 
     strncpy(myNodeInfo.firmware_version, optstr(APP_VERSION), sizeof(myNodeInfo.firmware_version));
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
     Preferences preferences;
     preferences.begin("meshtastic", false);
     myNodeInfo.reboot_count = preferences.getUInt("rebootCounter", 0);
@@ -263,7 +315,15 @@ void NodeDB::init()
 
     resetRadioConfig(); // If bogus settings got saved, then fix them
     DEBUG_MSG("region=%d, NODENUM=0x%x, dbsize=%d\n", config.lora.region, myNodeInfo.my_node_num, *numNodes);
-    saveToDisk();
+
+    if (devicestateCRC != crc32Buffer(&devicestate, sizeof(devicestate)))
+        saveWhat |= SEGMENT_DEVICESTATE;
+    if (configCRC != crc32Buffer(&config, sizeof(config)))
+        saveWhat |= SEGMENT_CONFIG;
+    if (channelFileCRC != crc32Buffer(&channelFile, sizeof(channelFile)))
+        saveWhat |= SEGMENT_CHANNELS;
+
+    saveToDisk(saveWhat);
 }
 
 // We reserve a few nodenums for future use
@@ -297,6 +357,8 @@ static const char *prefFileName = "/prefs/db.proto";
 static const char *configFileName = "/prefs/config.proto";
 static const char *moduleConfigFileName = "/prefs/module.proto";
 static const char *channelFileName = "/prefs/channels.proto";
+static const char *oemConfigFile = "/oem/oem.proto";
+
 
 /** Load a protobuf from a file, return true for success */
 bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct)
@@ -305,7 +367,7 @@ bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_
 #ifdef FSCom
     // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
 
-    auto f = FSCom.open(filename);
+    auto f = FSCom.open(filename, FILE_O_READ);
 
     if (f) {
         DEBUG_MSG("Loading %s\n", filename);
@@ -338,19 +400,7 @@ void NodeDB::loadFromDisk()
     } else {
         if (devicestate.version < DEVICESTATE_MIN_VER) {
             DEBUG_MSG("Warn: devicestate %d is old, discarding\n", devicestate.version);
-            installDefaultDeviceState();
-#ifndef NO_ESP32
-            // This will erase what's in NVS including ssl keys, persistant variables and ble pairing
-            nvs_flash_erase();
-#endif
-#ifdef NRF52_SERIES
-            Bluefruit.begin();
-            DEBUG_MSG("Clearing bluetooth bonds!\n");
-            bond_print_list(BLE_GAP_ROLE_PERIPH);
-            bond_print_list(BLE_GAP_ROLE_CENTRAL);
-            Bluefruit.Periph.clearBonds();
-            Bluefruit.Central.clearBonds();
-#endif
+            factoryReset();
         } else {
             DEBUG_MSG("Loaded saved devicestate version %d\n", devicestate.version);
         }
@@ -388,6 +438,9 @@ void NodeDB::loadFromDisk()
             DEBUG_MSG("Loaded saved channelFile version %d\n", channelFile.version);
         }
     }
+
+    if (loadProto(oemConfigFile, OEMStore_size, sizeof(OEMStore), OEMStore_fields, &oemStore))
+        DEBUG_MSG("Loaded OEMStore\n");
 }
 
 /** Save a protobuf from a file, return true for success */
@@ -408,13 +461,12 @@ bool saveProto(const char *filename, size_t protoSize, size_t objSize, const pb_
         } else {
             okay = true;
         }
-
         f.close();
 
         // brief window of risk here ;-)
         if (FSCom.exists(filename) && !FSCom.remove(filename))
             DEBUG_MSG("Warning: Can't remove old pref file\n");
-        if (!FSCom.rename(filenameTmp.c_str(), filename))
+        if (!renameFile(filenameTmp.c_str(), filename))
             DEBUG_MSG("Error: can't rename new pref file\n");
     } else {
         DEBUG_MSG("Can't write prefs\n");
@@ -431,37 +483,55 @@ void NodeDB::saveChannelsToDisk()
 #ifdef FSCom
         FSCom.mkdir("/prefs");
 #endif
-        saveProto(channelFileName, ChannelFile_size, sizeof(ChannelFile), ChannelFile_fields, &channelFile);
+        saveProto(channelFileName, ChannelFile_size, sizeof(channelFile), ChannelFile_fields, &channelFile);
     }
 }
 
-void NodeDB::saveToDisk()
+void NodeDB::saveDeviceStateToDisk() 
 {
     if (!devicestate.no_save) {
 #ifdef FSCom
         FSCom.mkdir("/prefs");
 #endif
         saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+    }
+}
 
-        // save all config segments
-        config.has_device = true;
-        config.has_display = true;
-        config.has_lora = true;
-        config.has_position = true;
-        config.has_power = true;
-        config.has_wifi = true;
-        saveProto(configFileName, LocalConfig_size, sizeof(LocalConfig), LocalConfig_fields, &config);
+void NodeDB::saveToDisk(int saveWhat)
+{
+    if (!devicestate.no_save) {
+#ifdef FSCom
+        FSCom.mkdir("/prefs");
+#endif
+        if (saveWhat & SEGMENT_DEVICESTATE) {
+            saveDeviceStateToDisk();
+        }
 
-        moduleConfig.has_canned_message = true;
-        moduleConfig.has_external_notification = true;
-        moduleConfig.has_mqtt = true;
-        moduleConfig.has_range_test = true;
-        moduleConfig.has_serial = true;
-        moduleConfig.has_store_forward = true;
-        moduleConfig.has_telemetry = true;
-        saveProto(moduleConfigFileName, LocalModuleConfig_size, sizeof(LocalModuleConfig), LocalModuleConfig_fields, &moduleConfig);
+        if (saveWhat & SEGMENT_CONFIG) {
+            config.has_device = true;
+            config.has_display = true;
+            config.has_lora = true;
+            config.has_position = true;
+            config.has_power = true;
+            config.has_network = true;
+            config.has_bluetooth = true;
+            saveProto(configFileName, LocalConfig_size, sizeof(config), LocalConfig_fields, &config);
+        }
 
-        saveChannelsToDisk();
+        if (saveWhat & SEGMENT_MODULECONFIG) {
+            moduleConfig.has_canned_message = true;
+            moduleConfig.has_external_notification = true;
+            moduleConfig.has_mqtt = true;
+            moduleConfig.has_range_test = true;
+            moduleConfig.has_serial = true;
+            moduleConfig.has_store_forward = true;
+            moduleConfig.has_telemetry = true;
+            saveProto(moduleConfigFileName, LocalModuleConfig_size, sizeof(moduleConfig), LocalModuleConfig_fields, &moduleConfig);
+        }
+
+        if (saveWhat & SEGMENT_CHANNELS) {
+            saveChannelsToDisk();
+        }
     } else {
         DEBUG_MSG("***** DEVELOPMENT MODE - DO NOT RELEASE - not saving to flash *****\n");
     }
@@ -514,11 +584,11 @@ void NodeDB::updatePosition(uint32_t nodeId, const Position &p, RxSource src)
 
     if (src == RX_SRC_LOCAL) {
         // Local packet, fully authoritative
-        DEBUG_MSG("updatePosition LOCAL pos@%x, time=%u, latI=%d, lonI=%d, alt=%d\n", p.pos_timestamp, p.time, p.latitude_i,
+        DEBUG_MSG("updatePosition LOCAL pos@%x, time=%u, latI=%d, lonI=%d, alt=%d\n", p.timestamp, p.time, p.latitude_i,
                   p.longitude_i, p.altitude);
         info->position = p;
 
-    } else if ((p.time > 0) && !p.latitude_i && !p.longitude_i && !p.pos_timestamp && !p.location_source) {
+    } else if ((p.time > 0) && !p.latitude_i && !p.longitude_i && !p.timestamp && !p.location_source) {
         // FIXME SPECIAL TIME SETTING PACKET FROM EUD TO RADIO
         // (stop-gap fix for issue #900)
         DEBUG_MSG("updatePosition SPECIAL time setting time=%u\n", p.time);
@@ -603,7 +673,7 @@ void NodeDB::updateUser(uint32_t nodeId, const User &p)
 /// we updateGUI and updateGUIforNode if we think our this change is big enough for a redraw
 void NodeDB::updateFrom(const MeshPacket &mp)
 {
-    if (mp.which_payloadVariant == MeshPacket_decoded_tag && mp.from) {
+    if (mp.which_payload_variant == MeshPacket_decoded_tag && mp.from) {
         DEBUG_MSG("Update DB node 0x%x, rx_time=%u\n", mp.from, mp.rx_time);
 
         NodeInfo *info = getOrCreateNode(getFrom(&mp));
@@ -637,11 +707,23 @@ NodeInfo *NodeDB::getOrCreateNode(NodeNum n)
 
     if (!info) {
         if (*numNodes >= MAX_NUM_NODES) {
-            screen->print("error: node_db full!\n");
-            DEBUG_MSG("ERROR! could not create new node, node_db is full! (%d nodes)", *numNodes);
-            return NULL;
+            screen->print("warning: node_db full! erasing oldest entry\n");
+            // look for oldest node and erase it
+            uint32_t oldest = UINT32_MAX;
+            int oldestIndex = -1;
+            for (int i = 0; i < *numNodes; i++) {
+                if (nodes[i].last_heard < oldest) {
+                    oldest = nodes[i].last_heard;
+                    oldestIndex = i;
+                }
+            }
+            // Shove the remaining nodes down the chain
+            for (int i = oldestIndex; i < *numNodes - 1; i++) {
+                nodes[i] = nodes[i + 1];
+            }
+            (*numNodes)--;
         }
-        // add the node
+        // add the node at the end
         info = &nodes[(*numNodes)++];
 
         // everything is missing except the nodenum
@@ -669,7 +751,7 @@ void recordCriticalError(CriticalErrorCode code, uint32_t address, const char *f
     myNodeInfo.error_count++;
 
     // Currently portuino is mostly used for simulation.  Make sue the user notices something really bad happend
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     DEBUG_MSG("A critical failure occurred, portduino is exiting...");
     exit(2);
 #endif

src/mesh/NodeDB.h

@@ -8,11 +8,25 @@
 #include "NodeStatus.h"
 #include "mesh-pb-constants.h"
 
+/*
+DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
+#define here.
+*/
+
+#define SEGMENT_CONFIG 1
+#define SEGMENT_MODULECONFIG 2
+#define SEGMENT_DEVICESTATE 4
+#define SEGMENT_CHANNELS 8
+
+#define DEVICESTATE_CUR_VER 19
+#define DEVICESTATE_MIN_VER DEVICESTATE_CUR_VER
+
 extern DeviceState devicestate;
 extern ChannelFile channelFile;
 extern MyNodeInfo &myNodeInfo;
 extern LocalConfig config;
 extern LocalModuleConfig moduleConfig;
+extern OEMStore oemStore;
 extern User &owner;
 
 /// Given a node, return how many seconds in the past (vs now) that we last heard from it
@@ -44,7 +58,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(), saveChannelsToDisk();
+    void saveToDisk(int saveWhat=SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or
@@ -52,7 +66,7 @@ class NodeDB
      *
      * @return true if the config was completely reset, in that case, we should send it back to the client
      */
-    bool resetRadioConfig();
+    bool resetRadioConfig(bool factory_reset = false);
 
     /// given a subpacket sniffed from the network, update our DB state
     /// we updateGUI and updateGUIforNode if we think our this change is big enough for a redraw
@@ -107,6 +121,10 @@ class NodeDB
     /// Return the number of nodes we've heard from recently (within the last 2 hrs?)
     size_t getNumOnlineNodes();
 
+    void initConfigIntervals(), initModuleConfigIntervals(), resetNodes();
+    
+    bool factoryReset();
+
   private:
     /// Find a node in our DB, create an empty NodeInfo if missing
     NodeInfo *getOrCreateNode(NodeNum n);
@@ -119,7 +137,6 @@ class NodeDB
         newStatus.notifyObservers(&status);
     }
 
-    bool factoryReset();
 
     /// read our db from flash
     void loadFromDisk();
@@ -163,26 +180,35 @@ extern NodeDB nodeDB;
 // Our delay functions check for this for times that should never expire
 #define NODE_DELAY_FOREVER 0xffffffff
 
-#define IF_ROUTER(routerVal, normalVal) ((config.device.role == Config_DeviceConfig_Role_Router) ? (routerVal) : (normalVal))
+#define IF_ROUTER(routerVal, normalVal) ((config.device.role == Config_DeviceConfig_Role_ROUTER) ? (routerVal) : (normalVal))
 
-#define default_broadcast_interval_secs IF_ROUTER(12 * 60 * 60, 15 * 60)
+#define ONE_DAY 24 * 60 * 60
+
+#define default_gps_attempt_time IF_ROUTER(5 * 60, 15 * 60)
+#define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60)
+#define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 15 * 60)
 #define default_wait_bluetooth_secs IF_ROUTER(1, 60)
 #define default_mesh_sds_timeout_secs IF_ROUTER(NODE_DELAY_FOREVER, 2 * 60 * 60)
-#define default_sds_secs 365 * 24 * 60 * 60
-#define default_ls_secs IF_ROUTER(24 * 60 * 60, 5 * 60)
+#define default_sds_secs IF_ROUTER(ONE_DAY, UINT32_MAX) // Default to forever super deep sleep
+#define default_ls_secs IF_ROUTER(ONE_DAY, 5 * 60)
 #define default_min_wake_secs 10
+#define default_screen_on_secs 60 * 10
 
-
-inline uint32_t getIntervalOrDefaultMs(uint32_t interval)
+inline uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval)
 {
-    if (interval > 0)
-        return interval * 1000;
+    if (configuredInterval > 0) return configuredInterval * 1000;
     return default_broadcast_interval_secs * 1000;
 }
 
+inline uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval)
+{
+    if (configuredInterval > 0) return configuredInterval * 1000;
+    return defaultInterval * 1000;
+}
+
 /** The current change # for radio settings.  Starts at 0 on boot and any time the radio settings
  * might have changed is incremented.  Allows others to detect they might now be on a new channel.
  */
 extern uint32_t radioGeneration;
 
-#define Module_Config_size (ModuleConfig_CannedMessageConfig_size + ModuleConfig_ExternalNotificationConfig_size + ModuleConfig_MQTTConfig_size + ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size + ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
+#define Module_Config_size (ModuleConfig_CannedMessageConfig_size + ModuleConfig_ExternalNotificationConfig_size + ModuleConfig_MQTTConfig_size + ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size + ModuleConfig_TelemetryConfig_size + ModuleConfig_size)

src/mesh/PhoneAPI.cpp

@@ -78,21 +78,18 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
 
     memset(&toRadioScratch, 0, sizeof(toRadioScratch));
     if (pb_decode_from_bytes(buf, bufLength, ToRadio_fields, &toRadioScratch)) {
-        switch (toRadioScratch.which_payloadVariant) {
+        switch (toRadioScratch.which_payload_variant) {
         case ToRadio_packet_tag:
             return handleToRadioPacket(toRadioScratch.packet);
-
         case ToRadio_want_config_id_tag:
             config_nonce = toRadioScratch.want_config_id;
             DEBUG_MSG("Client wants config, nonce=%u\n", config_nonce);
-
             handleStartConfig();
             break;
-
         case ToRadio_disconnect_tag:
+            DEBUG_MSG("Disconnecting from phone\n");
             close();
             break;
-
         default:
             // Ignore nop messages
             // DEBUG_MSG("Error: unexpected ToRadio variant\n");
@@ -112,139 +109,159 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
  *
  * Our sending states progress in the following sequence (the client app ASSUMES THIS SEQUENCE, DO NOT CHANGE IT):
  *      STATE_SEND_MY_INFO, // send our my info record
- *      STATE_SEND_GROUPS
+ *      STATE_SEND_CHANNELS
+ *      STATE_SEND_NODEINFO, // states progress in this order as the device sends to the client
         STATE_SEND_CONFIG,
-        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
+        STATE_SEND_MODULE_CONFIG,
         STATE_SEND_COMPLETE_ID,
         STATE_SEND_PACKETS // send packets or debug strings
  */
 size_t PhoneAPI::getFromRadio(uint8_t *buf)
 {
     if (!available()) {
-        // DEBUG_MSG("getFromRadio, !available\n");
+        // DEBUG_MSG("getFromRadio=not available\n");
         return 0;
     }
-
-    DEBUG_MSG("getFromRadio, state=%d\n", state);
-
     // In case we send a FromRadio packet
     memset(&fromRadioScratch, 0, sizeof(fromRadioScratch));
 
     // Advance states as needed
     switch (state) {
     case STATE_SEND_NOTHING:
+        DEBUG_MSG("getFromRadio=STATE_SEND_NOTHING\n");
         break;
 
     case STATE_SEND_MY_INFO:
+        DEBUG_MSG("getFromRadio=STATE_SEND_MY_INFO\n");
         // If the user has specified they don't want our node to share its location, make sure to tell the phone
         // app not to send locations on our behalf.
         myNodeInfo.has_gps = gps && gps->isConnected(); // Update with latest GPS connect info
-        fromRadioScratch.which_payloadVariant = FromRadio_my_info_tag;
+        fromRadioScratch.which_payload_variant = FromRadio_my_info_tag;
         fromRadioScratch.my_info = myNodeInfo;
-        state = STATE_SEND_CONFIG;
+        state = STATE_SEND_NODEINFO;
 
         service.refreshMyNodeInfo(); // Update my NodeInfo because the client will be asking for it soon.
         break;
 
-    case STATE_SEND_CONFIG:
-        fromRadioScratch.which_payloadVariant = FromRadio_config_tag;
-        switch (config_state) {
-            case Config_device_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_device_tag;
-                fromRadioScratch.config.payloadVariant.device = config.device;
-                break;
-            case Config_position_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_position_tag;
-                fromRadioScratch.config.payloadVariant.position = config.position;
-                break;
-            case Config_power_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_power_tag;
-                fromRadioScratch.config.payloadVariant.power = config.power;
-                fromRadioScratch.config.payloadVariant.power.ls_secs = default_ls_secs;
-                break;
-            case Config_wifi_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_wifi_tag;
-                fromRadioScratch.config.payloadVariant.wifi = config.wifi;
-                break;
-            case Config_display_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_display_tag;
-                fromRadioScratch.config.payloadVariant.display = config.display;
-                break;
-            case Config_lora_tag:
-                fromRadioScratch.config.which_payloadVariant = Config_lora_tag;
-                fromRadioScratch.config.payloadVariant.lora = config.lora;
-                break;
-        }
-
-        // NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
-        // So even if we internally use 0 to represent 'use default' we still need to send the value we are
-        // using to the app (so that even old phone apps work with new device loads).
-        
-        config_state++;
-        // Advance when we have sent all of our config objects
-        if (config_state > Config_lora_tag) {
-            state = STATE_SEND_MODULECONFIG;
-            config_state = ModuleConfig_mqtt_tag;
-        }
-        break;
-
-    case STATE_SEND_MODULECONFIG:
-        fromRadioScratch.which_payloadVariant = FromRadio_moduleConfig_tag;
-        switch (config_state) {
-            case ModuleConfig_mqtt_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_mqtt_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.mqtt = moduleConfig.mqtt;
-                break;
-            case ModuleConfig_serial_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_serial_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.serial = moduleConfig.serial;
-                break;
-            case ModuleConfig_external_notification_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_external_notification_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.external_notification = moduleConfig.external_notification;
-                break;
-            case ModuleConfig_range_test_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_range_test_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.range_test = moduleConfig.range_test;
-                break;
-            case ModuleConfig_telemetry_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_telemetry_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.telemetry = moduleConfig.telemetry;
-                break;
-            case ModuleConfig_canned_message_tag:
-                fromRadioScratch.moduleConfig.which_payloadVariant = ModuleConfig_canned_message_tag;
-                fromRadioScratch.moduleConfig.payloadVariant.canned_message = moduleConfig.canned_message;
-                break;
-        }
-
-        config_state++;
-        // Advance when we have sent all of our ModuleConfig objects
-        if (config_state > ModuleConfig_canned_message_tag) {
-            state = STATE_SEND_NODEINFO;
-            config_state = Config_device_tag;
-        }
-        break;
     case STATE_SEND_NODEINFO: {
+        DEBUG_MSG("getFromRadio=STATE_SEND_NODEINFO\n");
         const NodeInfo *info = nodeInfoForPhone;
         nodeInfoForPhone = NULL; // We just consumed a nodeinfo, will need a new one next time
 
         if (info) {
             DEBUG_MSG("Sending nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s\n", info->num, info->last_heard, info->user.id,
                       info->user.long_name);
-            fromRadioScratch.which_payloadVariant = FromRadio_node_info_tag;
+            fromRadioScratch.which_payload_variant = FromRadio_node_info_tag;
             fromRadioScratch.node_info = *info;
             // Stay in current state until done sending nodeinfos
         } else {
             DEBUG_MSG("Done sending nodeinfos\n");
-            state = STATE_SEND_COMPLETE_ID;
+            state = STATE_SEND_CHANNELS;
             // Go ahead and send that ID right now
             return getFromRadio(buf);
         }
         break;
     }
 
+    case STATE_SEND_CHANNELS:
+        DEBUG_MSG("getFromRadio=STATE_SEND_CHANNELS\n");
+        fromRadioScratch.which_payload_variant = FromRadio_channel_tag;
+        fromRadioScratch.channel = channels.getByIndex(config_state);
+        config_state++;
+        // Advance when we have sent all of our Channels
+        if (config_state >= MAX_NUM_CHANNELS) {
+            state = STATE_SEND_CONFIG;
+            config_state = Config_device_tag;
+        }
+        break;
+
+    case STATE_SEND_CONFIG:
+        DEBUG_MSG("getFromRadio=STATE_SEND_CONFIG\n");
+        fromRadioScratch.which_payload_variant = FromRadio_config_tag;
+        switch (config_state) {
+        case Config_device_tag:
+            fromRadioScratch.config.which_payload_variant = Config_device_tag;
+            fromRadioScratch.config.payload_variant.device = config.device;
+            break;
+        case Config_position_tag:
+            fromRadioScratch.config.which_payload_variant = Config_position_tag;
+            fromRadioScratch.config.payload_variant.position = config.position;
+            break;
+        case Config_power_tag:
+            fromRadioScratch.config.which_payload_variant = Config_power_tag;
+            fromRadioScratch.config.payload_variant.power = config.power;
+            fromRadioScratch.config.payload_variant.power.ls_secs = default_ls_secs;
+            break;
+        case Config_network_tag:
+            fromRadioScratch.config.which_payload_variant = Config_network_tag;
+            fromRadioScratch.config.payload_variant.network = config.network;
+            break;
+        case Config_display_tag:
+            fromRadioScratch.config.which_payload_variant = Config_display_tag;
+            fromRadioScratch.config.payload_variant.display = config.display;
+            break;
+        case Config_lora_tag:
+            fromRadioScratch.config.which_payload_variant = Config_lora_tag;
+            fromRadioScratch.config.payload_variant.lora = config.lora;
+            break;
+        case Config_bluetooth_tag:
+            fromRadioScratch.config.which_payload_variant = Config_bluetooth_tag;
+            fromRadioScratch.config.payload_variant.bluetooth = config.bluetooth;
+            break;
+        }
+        // NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
+        // So even if we internally use 0 to represent 'use default' we still need to send the value we are
+        // using to the app (so that even old phone apps work with new device loads).
+
+        config_state++;
+        // Advance when we have sent all of our config objects
+        if (config_state > Config_bluetooth_tag) {
+            state = STATE_SEND_MODULECONFIG;
+            config_state = ModuleConfig_mqtt_tag;
+        }
+        break;
+
+    case STATE_SEND_MODULECONFIG:
+        DEBUG_MSG("getFromRadio=STATE_SEND_MODULECONFIG\n");
+        fromRadioScratch.which_payload_variant = FromRadio_moduleConfig_tag;
+        switch (config_state) {
+        case ModuleConfig_mqtt_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_mqtt_tag;
+            fromRadioScratch.moduleConfig.payload_variant.mqtt = moduleConfig.mqtt;
+            break;
+        case ModuleConfig_serial_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_serial_tag;
+            fromRadioScratch.moduleConfig.payload_variant.serial = moduleConfig.serial;
+            break;
+        case ModuleConfig_external_notification_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_external_notification_tag;
+            fromRadioScratch.moduleConfig.payload_variant.external_notification = moduleConfig.external_notification;
+            break;
+        case ModuleConfig_range_test_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_range_test_tag;
+            fromRadioScratch.moduleConfig.payload_variant.range_test = moduleConfig.range_test;
+            break;
+        case ModuleConfig_telemetry_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_telemetry_tag;
+            fromRadioScratch.moduleConfig.payload_variant.telemetry = moduleConfig.telemetry;
+            break;
+        case ModuleConfig_canned_message_tag:
+            fromRadioScratch.moduleConfig.which_payload_variant = ModuleConfig_canned_message_tag;
+            fromRadioScratch.moduleConfig.payload_variant.canned_message = moduleConfig.canned_message;
+            break;
+        }
+
+        config_state++;
+        // Advance when we have sent all of our ModuleConfig objects
+        if (config_state > ModuleConfig_canned_message_tag) {
+            state = STATE_SEND_COMPLETE_ID;
+            config_state = 0;
+        }
+        break;
+
     case STATE_SEND_COMPLETE_ID:
-        fromRadioScratch.which_payloadVariant = FromRadio_config_complete_id_tag;
+        DEBUG_MSG("getFromRadio=STATE_SEND_COMPLETE_ID\n");
+        fromRadioScratch.which_payload_variant = FromRadio_config_complete_id_tag;
         fromRadioScratch.config_complete_id = config_nonce;
         config_nonce = 0;
         state = STATE_SEND_PACKETS;
@@ -252,11 +269,12 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
 
     case STATE_SEND_PACKETS:
         // Do we have a message from the mesh?
+        DEBUG_MSG("getFromRadio=STATE_SEND_PACKETS\n");
         if (packetForPhone) {
             printPacket("phone downloaded packet", packetForPhone);
 
             // Encapsulate as a FromRadio packet
-            fromRadioScratch.which_payloadVariant = FromRadio_packet_tag;
+            fromRadioScratch.which_payload_variant = FromRadio_packet_tag;
             fromRadioScratch.packet = *packetForPhone;
         }
         releasePhonePacket();
@@ -267,10 +285,11 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
     }
 
     // Do we have a message from the mesh?
-    if (fromRadioScratch.which_payloadVariant != 0) {
+    if (fromRadioScratch.which_payload_variant != 0) {
         // Encapsulate as a FromRadio packet
         size_t numbytes = pb_encode_to_bytes(buf, FromRadio_size, FromRadio_fields, &fromRadioScratch);
-        // DEBUG_MSG("encoding toPhone packet to phone variant=%d, %d bytes\n", fromRadioScratch.which_payloadVariant, numbytes);
+
+        DEBUG_MSG("encoding toPhone packet to phone variant=%d, %d bytes\n", fromRadioScratch.which_payload_variant, numbytes);
         return numbytes;
     }
 
@@ -278,7 +297,10 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
     return 0;
 }
 
-void PhoneAPI::handleDisconnect() {}
+void PhoneAPI::handleDisconnect()
+{
+    DEBUG_MSG("PhoneAPI disconnect\n");
+}
 
 void PhoneAPI::releasePhonePacket()
 {
@@ -296,33 +318,24 @@ bool PhoneAPI::available()
     switch (state) {
     case STATE_SEND_NOTHING:
         return false;
-
     case STATE_SEND_MY_INFO:
-        return true;
-            
+    case STATE_SEND_CHANNELS:
     case STATE_SEND_CONFIG:
-        return true;        
-
     case STATE_SEND_MODULECONFIG:
+    case STATE_SEND_COMPLETE_ID:
         return true;
-
     case STATE_SEND_NODEINFO:
         if (!nodeInfoForPhone)
             nodeInfoForPhone = nodeDB.readNextInfo();
         return true; // Always say we have something, because we might need to advance our state machine
 
-    case STATE_SEND_COMPLETE_ID:
-        return true;
-
     case STATE_SEND_PACKETS: {
-        // Try to pull a new packet from the service (if we haven't already)
         if (!packetForPhone)
             packetForPhone = service.getForPhone();
         bool hasPacket = !!packetForPhone;
         // DEBUG_MSG("available hasPacket=%d\n", hasPacket);
         return hasPacket;
     }
-
     default:
         assert(0); // unexpected state - FIXME, make an error code and reboot
     }

src/mesh/PhoneAPI.h

@@ -16,23 +16,22 @@
  * Eventually there should be once instance of this class for each live connection (because it has a bit of state
  * for that connection)
  */
-class PhoneAPI
-    : public Observer<uint32_t> // FIXME, we shouldn't be inheriting from Observer, instead use CallbackObserver as a member
+class PhoneAPI : public Observer<uint32_t> // FIXME, we shouldn't be inheriting from Observer, instead use CallbackObserver as a member
 {
     enum State {
         STATE_SEND_NOTHING, // Initial state, don't send anything until the client starts asking for config
         STATE_SEND_MY_INFO, // send our my info record
-        STATE_SEND_GROUPS, // new in 1.3?
+        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
+        STATE_SEND_CHANNELS, // Send all channels
         STATE_SEND_CONFIG, // Replacement for the old Radioconfig
         STATE_SEND_MODULECONFIG, // Send Module specific config
-        STATE_SEND_NODEINFO, // states progress in this order as the device sends to to the client
         STATE_SEND_COMPLETE_ID,
         STATE_SEND_PACKETS // send packets or debug strings
     };
 
     State state = STATE_SEND_NOTHING;
 
-    int8_t config_state = Config_device_tag;
+    uint8_t config_state = 0;
 
     /**
      * Each packet sent to the phone has an incrementing count
@@ -60,7 +59,7 @@ class PhoneAPI
     // Call this when the client drops the connection, resets the state to STATE_SEND_NOTHING
     // Unregisters our observer.  A closed connection **can** be reopened by calling init again.
     virtual void close();
-
+    
     /**
      * Handle a ToRadio protobuf
      * @return true true if a packet was queued for sending (so that caller can yield)
@@ -82,6 +81,8 @@ class PhoneAPI
 
     bool isConnected() { return state != STATE_SEND_NOTHING; }
 
+    void setInitialState() { state = STATE_SEND_MY_INFO; }
+
     /// emit a debugging log character, FIXME - implement
     void debugOut(char c) { }
 

src/mesh/ProtobufModule.h

@@ -75,7 +75,7 @@ template <class T> class ProtobufModule : protected SinglePortModule
 
         T scratch;
         T *decoded = NULL;
-        if (mp.which_payloadVariant == MeshPacket_decoded_tag && mp.decoded.portnum == ourPortNum) {
+        if (mp.which_payload_variant == MeshPacket_decoded_tag && mp.decoded.portnum == ourPortNum) {
             memset(&scratch, 0, sizeof(scratch));
             if (pb_decode_from_bytes(p.payload.bytes, p.payload.size, fields, &scratch)) {
                 decoded = &scratch;

src/mesh/RF95Interface.cpp

@@ -104,15 +104,15 @@ bool RF95Interface::reconfigure()
     // configure publicly accessible settings
     int err = lora->setSpreadingFactor(sf);
     if (err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora->setBandwidth(bw);
     if (err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora->setCodingRate(cr);
     if (err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora->setSyncWord(syncWord);
     assert(err == RADIOLIB_ERR_NONE);
@@ -125,13 +125,13 @@ bool RF95Interface::reconfigure()
 
     err = lora->setFrequency(getFreq());
     if (err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
     if (power > MAX_POWER) // This chip has lower power limits than some
         power = MAX_POWER;
     err = lora->setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)
-        RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
+        RECORD_CRITICALERROR(CriticalErrorCode_INVALID_RADIO_SETTING);
 
     startReceive(); // restart receiving
 

src/mesh/RadioInterface.cpp

@@ -6,15 +6,16 @@
 #include "Router.h"
 #include "assert.h"
 #include "configuration.h"
+#include "main.h"
 #include "sleep.h"
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
 
-#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching)                 \
+#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching, wide_lora)                 \
     {                                                                                                                            \
         Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted,            \
-            frequency_switching, #name                                                                                           \
+            frequency_switching, wide_lora, #name                                                                                           \
     }
 
 const RegionInfo regions[] = {
@@ -22,12 +23,12 @@ const RegionInfo regions[] = {
         https://link.springer.com/content/pdf/bbm%3A978-1-4842-4357-2%2F1.pdf
         https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
     */
-    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false),
+    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(EU433, 433.0f, 434.0f, 10, 0, 12, true, false),
+    RDEF(EU_433, 433.0f, 434.0f, 10, 0, 12, true, false, false),
 
     /*
         https://www.thethingsnetwork.org/docs/lorawan/duty-cycle/
@@ -35,24 +36,31 @@ const RegionInfo regions[] = {
         https://www.legislation.gov.uk/uksi/1999/930/schedule/6/part/III/made/data.xht?view=snippet&wrap=true
 
         audio_permitted = false per regulation
+
+        Special Note:
+        The link above describes LoRaWAN's band plan, stating a power limit of 16 dBm. This is their own suggested specification,
+        we do not need to follow it. The European Union regulations clearly state that the power limit for this frequency range is 500 mW, or 27 dBm.
+        It also states that we can use interference avoidance and spectrum access techniques to avoid a duty cycle.
+        (Please refer to section 4.21 in the following document)
+        https://ec.europa.eu/growth/tools-databases/tris/index.cfm/ro/search/?trisaction=search.detail&year=2021&num=528&dLang=EN
      */
-    RDEF(EU868, 869.4f, 869.65f, 10, 0, 16, false, false),
+    RDEF(EU_868, 869.4f, 869.65f, 10, 0, 27, false, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false),
+    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(JP, 920.8f, 927.8f, 100, 0, 16, true, false),
+    RDEF(JP, 920.8f, 927.8f, 100, 0, 16, true, false, false),
 
     /*
         https://www.iot.org.au/wp/wp-content/uploads/2016/12/IoTSpectrumFactSheet.pdf
         https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
      */
-    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false),
+    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         https://digital.gov.ru/uploaded/files/prilozhenie-12-k-reshenyu-gkrch-18-46-03-1.pdf
@@ -60,38 +68,44 @@ const RegionInfo regions[] = {
         Note:
             - We do LBT, so 100% is allowed.
      */
-    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false),
+    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false, false),
 
     /*
         ???
      */
-    RDEF(KR, 920.0f, 923.0f, 100, 0, 0, true, false),
+    RDEF(KR, 920.0f, 923.0f, 100, 0, 0, true, false, false),
 
     /*
         ???
      */
-    RDEF(TW, 920.0f, 925.0f, 100, 0, 0, true, false),
+    RDEF(TW, 920.0f, 925.0f, 100, 0, 0, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false),
+    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false, false),
 
     /*
          https://rrf.rsm.govt.nz/smart-web/smart/page/-smart/domain/licence/LicenceSummary.wdk?id=219752
          https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
       */
-    RDEF(NZ865, 864.0f, 868.0f, 100, 0, 0, true, false),
+    RDEF(NZ_865, 864.0f, 868.0f, 100, 0, 0, true, false, false),
 
     /*
        https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
     */
-    RDEF(TH, 920.0f, 925.0f, 100, 0, 16, true, false),
+    RDEF(TH, 920.0f, 925.0f, 100, 0, 16, true, false, false),
+
+    /*
+       2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
+    */
+
+    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 0, 10, true, false, true),
 
     /*
         This needs to be last. Same as US.
     */
-    RDEF(Unset, 902.0f, 928.0f, 100, 0, 30, true, false)
+    RDEF(UNSET, 902.0f, 928.0f, 100, 0, 30, true, false, false)
 
 };
 
@@ -100,7 +114,7 @@ const RegionInfo *myRegion;
 void initRegion()
 {
     const RegionInfo *r = regions;
-    for (; r->code != Config_LoRaConfig_RegionCode_Unset && r->code != config.lora.region; r++)
+    for (; r->code != Config_LoRaConfig_RegionCode_UNSET && r->code != config.lora.region; r++)
         ;
     myRegion = r;
     DEBUG_MSG("Wanted region %d, using %s\n", config.lora.region, r->name);
@@ -150,7 +164,7 @@ uint32_t RadioInterface::getPacketTime(uint32_t pl)
 
 uint32_t RadioInterface::getPacketTime(MeshPacket *p)
 {
-    assert(p->which_payloadVariant == MeshPacket_encrypted_tag); // It should have already been encoded by now
+    assert(p->which_payload_variant == MeshPacket_encrypted_tag); // It should have already been encoded by now
     uint32_t pl = p->encrypted.size + sizeof(PacketHeader);
 
     return getPacketTime(pl);
@@ -197,8 +211,8 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr)
     uint32_t delay = 0;
     uint8_t CWsize = map(snr, SNR_MIN, SNR_MAX, CWmin, CWmax);
     // DEBUG_MSG("rx_snr of %f so setting CWsize to:%d\n", snr, CWsize);
-    if (config.device.role == Config_DeviceConfig_Role_Router ||
-        config.device.role == Config_DeviceConfig_Role_RouterClient) {
+    if (config.device.role == Config_DeviceConfig_Role_ROUTER ||
+        config.device.role == Config_DeviceConfig_Role_ROUTER_CLIENT) {
         delay = random(0, 2*CWsize) * slotTimeMsec;
         DEBUG_MSG("rx_snr found in packet. As a router, setting tx delay:%d\n", delay);
     } else {
@@ -213,7 +227,7 @@ void printPacket(const char *prefix, const MeshPacket *p)
 {
     DEBUG_MSG("%s (id=0x%08x Fr0x%02x To0x%02x, WantAck%d, HopLim%d Ch0x%x", prefix, p->id, p->from & 0xff, p->to & 0xff,
               p->want_ack, p->hop_limit, p->channel);
-    if (p->which_payloadVariant == MeshPacket_decoded_tag) {
+    if (p->which_payload_variant == MeshPacket_decoded_tag) {
         auto &s = p->decoded;
 
         DEBUG_MSG(" Portnum=%d", s.portnum);
@@ -347,41 +361,41 @@ void RadioInterface::applyModemConfig()
     // Set up default configuration
     // No Sync Words in LORA mode
     Config_LoRaConfig &loraConfig = config.lora;
-    auto channelSettings = channels.getPrimary();
     if (loraConfig.spread_factor == 0) {
+
         switch (loraConfig.modem_preset) {
-        case Config_LoRaConfig_ModemPreset_ShortFast:
-            bw = 250;
+        case Config_LoRaConfig_ModemPreset_SHORT_FAST:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 800 : 250;
             cr = 8;
             sf = 7;
             break;
-        case Config_LoRaConfig_ModemPreset_ShortSlow:
-            bw = 250;
+        case Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 800 : 250;
             cr = 8;
             sf = 8;
             break;
-        case Config_LoRaConfig_ModemPreset_MedFast:
-            bw = 250;
+        case Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 800 : 250;
             cr = 8;
             sf = 9;
             break;
-        case Config_LoRaConfig_ModemPreset_MedSlow:
-            bw = 250;
+        case Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 800 : 250;
             cr = 8;
             sf = 10;
             break;
-        case Config_LoRaConfig_ModemPreset_LongFast:
-            bw = 250;
+        case Config_LoRaConfig_ModemPreset_LONG_FAST:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 800 : 250;
             cr = 8;
             sf = 11;
             break;
-        case Config_LoRaConfig_ModemPreset_LongSlow:
-            bw = 125;
+        case Config_LoRaConfig_ModemPreset_LONG_SLOW:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 400 : 125;
             cr = 8;
             sf = 12;
             break;
-        case Config_LoRaConfig_ModemPreset_VLongSlow:
-            bw = 31.25;
+        case Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+            bw = (myRegion->wideLora && rIf_wide_lora) ? 200 : 31.25;
             cr = 8;
             sf = 12;
             break;
@@ -407,14 +421,22 @@ void RadioInterface::applyModemConfig()
 
     if (power == 0)
         power = 17; // Default to default power if we don't have a valid power
+
+    // Set final tx_power back onto config
+    loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
     
     // Calculate the number of channels
     uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
 
     // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
     const char *channelName = channels.getName(channels.getPrimaryIndex());
-    int channel_num = channelSettings.channel_num ? channelSettings.channel_num - 1 : hash(channelName) % numChannels;
-    float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
+    int channel_num = (loraConfig.channel_num ? loraConfig.channel_num - 1 : hash(channelName)) % numChannels;
+
+    // Old frequency selection formula
+    // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
+
+    // New frequency selection formula
+    float freq = myRegion->freqStart + (bw / 2000) + ( channel_num * (bw / 1000));
 
     saveChannelNum(channel_num);
     saveFreq(freq + config.lora.frequency_offset);
@@ -446,12 +468,6 @@ void RadioInterface::limitPower()
     DEBUG_MSG("Set radio: final power level=%d\n", power);
 }
 
-ErrorCode SimRadio::send(MeshPacket *p)
-{
-    DEBUG_MSG("SimRadio.send\n");
-    packetPool.release(p);
-    return ERRNO_OK;
-}
 
 void RadioInterface::deliverToReceiver(MeshPacket *p)
 {
@@ -467,7 +483,7 @@ size_t RadioInterface::beginSending(MeshPacket *p)
     assert(!sendingPacket);
 
     // DEBUG_MSG("sending queued packet on mesh (txGood=%d,rxGood=%d,rxBad=%d)\n", rf95.txGood(), rf95.rxGood(), rf95.rxBad());
-    assert(p->which_payloadVariant == MeshPacket_encrypted_tag); // It should have already been encoded by now
+    assert(p->which_payload_variant == MeshPacket_encrypted_tag); // It should have already been encoded by now
 
     lastTxStart = millis();
 

src/mesh/RadioInterface.h

@@ -212,11 +212,6 @@ class RadioInterface
     }
 };
 
-class SimRadio : public RadioInterface
-{
-  public:
-    virtual ErrorCode send(MeshPacket *p) override;
-};
 
 /// Debug printing for packets
 void printPacket(const char *prefix, const MeshPacket *p);

src/mesh/RadioLibInterface.cpp

@@ -11,7 +11,7 @@
 // FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
 static SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
 
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
 
 void LockingModule::SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes)
 {
@@ -43,9 +43,13 @@ RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq
     : NotifiedWorkerThread("RadioIf"), module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
 {
     instance = this;
+#if defined(ARCH_STM32WL) && defined(USE_SX1262)
+    module.setCb_digitalWrite(stm32wl_emulate_digitalWrite);
+    module.setCb_digitalRead(stm32wl_emulate_digitalRead);
+#endif
 }
 
-#ifndef NO_ESP32
+#ifdef ARCH_ESP32
 // ESP32 doesn't use that flag
 #define YIELD_FROM_ISR(x) portYIELD_FROM_ISR()
 #else
@@ -95,8 +99,8 @@ bool RadioLibInterface::canSendImmediately()
         // TX IRQ from the radio, the radio is probably broken.
         if (busyTx && (millis() - lastTxStart > 60000)) {
             DEBUG_MSG("Hardware Failure! busyTx for more than 60s\n");
-            RECORD_CRITICALERROR(CriticalErrorCode_TransmitFailed);
-#ifndef NO_ESP32
+            RECORD_CRITICALERROR(CriticalErrorCode_TRANSMIT_FAILED);
+#ifdef ARCH_ESP32
             if (busyTx && (millis() - lastTxStart > 65000)) // After 5s more, reboot
                 ESP.restart();
 #endif
@@ -116,18 +120,18 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
 #ifndef DISABLE_WELCOME_UNSET
 
-    if (config.lora.region != Config_LoRaConfig_RegionCode_Unset) {
-        if (disabled || config.lora.tx_disabled) {
+    if (config.lora.region != Config_LoRaConfig_RegionCode_UNSET) {
+        if (disabled || !config.lora.tx_enabled) {
 
-            if (config.lora.region != Config_LoRaConfig_RegionCode_Unset) {
-                if (disabled || config.lora.tx_disabled) {
-                    DEBUG_MSG("send - lora_tx_disabled\n");
+            if (config.lora.region != Config_LoRaConfig_RegionCode_UNSET) {
+                if (disabled || !config.lora.tx_enabled) {
+                    DEBUG_MSG("send - !config.lora.tx_enabled\n");
                     packetPool.release(p);
                     return ERRNO_DISABLED;
                 }
 
             } else {
-                DEBUG_MSG("send - lora_tx_disabled because RegionCode_Unset\n");
+                DEBUG_MSG("send - lora tx disable because RegionCode_Unset\n");
                 packetPool.release(p);
                 return ERRNO_DISABLED;
             }
@@ -136,8 +140,8 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
 #else
 
-    if (disabled || config.lora.tx_disabled) {
-        DEBUG_MSG("send - lora_tx_disabled\n");
+    if (disabled || !config.lora.tx_enabled) {
+        DEBUG_MSG("send - !config.lora.tx_enabled\n");
         packetPool.release(p);
         return ERRNO_DISABLED;
     }
@@ -358,7 +362,7 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
                 addReceiveMetadata(mp);
 
-                mp->which_payloadVariant = MeshPacket_encrypted_tag; // Mark that the payload is still encrypted at this point
+                mp->which_payload_variant = MeshPacket_encrypted_tag; // Mark that the payload is still encrypted at this point
                 assert(((uint32_t)payloadLen) <= sizeof(mp->encrypted.bytes));
                 memcpy(mp->encrypted.bytes, payload, payloadLen);
                 mp->encrypted.size = payloadLen;
@@ -377,7 +381,7 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
     void RadioLibInterface::startSend(MeshPacket * txp)
     {
         printPacket("Starting low level send", txp);
-        if (disabled || config.lora.tx_disabled) {
+        if (disabled || !config.lora.tx_enabled) {
             DEBUG_MSG("startSend is dropping tx packet because we are disabled\n");
             packetPool.release(txp);
         } else {
@@ -389,7 +393,7 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
 
             int res = iface->startTransmit(radiobuf, numbytes);
             if (res != RADIOLIB_ERR_NONE) {
-                RECORD_CRITICALERROR(CriticalErrorCode_RadioSpiBug);
+                RECORD_CRITICALERROR(CriticalErrorCode_RADIO_SPI_BUG);
 
                 // This send failed, but make sure to 'complete' it properly
                 completeSending();

src/mesh/RadioLibInterface.h

@@ -41,7 +41,7 @@ class LockingModule : public Module
     {
     }
     
-#ifdef PORTDUINO
+#ifdef ARCH_PORTDUINO
     void SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes) override;
 #else
     void SPIbeginTransaction() override;

src/mesh/ReliableRouter.cpp

@@ -16,12 +16,8 @@ ErrorCode ReliableRouter::send(MeshPacket *p)
         // If someone asks for acks on broadcast, we need the hop limit to be at least one, so that first node that receives our
         // message will rebroadcast.  But asking for hop_limit 0 in that context means the client app has no preference on hop
         // counts and we want this message to get through the whole mesh, so use the default.
-        if (p->to == NODENUM_BROADCAST && p->hop_limit == 0) {
-            if (config.lora.hop_limit && config.lora.hop_limit <= HOP_MAX) {
-                p->hop_limit = (config.lora.hop_limit >= HOP_MAX) ? HOP_MAX : config.lora.hop_limit;
-            } else {
-                p->hop_limit = HOP_RELIABLE;
-            }
+        if (p->hop_limit == 0) {
+            p->hop_limit = (config.lora.hop_limit >= HOP_MAX) ? HOP_MAX : config.lora.hop_limit;
         }
 
         auto copy = packetPool.allocCopy(*p);
@@ -34,7 +30,7 @@ ErrorCode ReliableRouter::send(MeshPacket *p)
 bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
 {
     // Note: do not use getFrom() here, because we want to ignore messages sent from phone
-    if (p->to == NODENUM_BROADCAST && p->from == getNodeNum()) {
+    if (p->from == getNodeNum()) {
         printPacket("Rx someone rebroadcasting for us", p);
 
         // We are seeing someone rebroadcast one of our broadcast attempts.
@@ -62,11 +58,17 @@ bool ReliableRouter::shouldFilterReceived(MeshPacket *p)
      * this way if an ACK is dropped and a packet is resent we'll ACK the resent packet
      * make sure wasSeenRecently _doesn't_ update
      * finding the channel requires decoding the packet. */
-    if (p->want_ack && (p->to == getNodeNum()) && wasSeenRecently(p, false)) {
+    if (p->want_ack && (p->to == getNodeNum()) && wasSeenRecently(p, false) && !MeshModule::currentReply) {
         if (perhapsDecode(p)) {
             sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
             DEBUG_MSG("acking a repeated want_ack packet\n");
         }
+    } else if (wasSeenRecently(p, false) && p->hop_limit == HOP_RELIABLE && !MeshModule::currentReply && p->to != nodeDB.getNodeNum()) {
+        // retransmission on broadcast has hop_limit still equal to HOP_RELIABLE
+        DEBUG_MSG("Resending implicit ack for a repeated floodmsg\n");
+        MeshPacket *tosend = packetPool.allocCopy(*p);
+        tosend->hop_limit--; // bump down the hop count
+        Router::send(tosend);
     }
 
     return FloodingRouter::shouldFilterReceived(p);
@@ -92,7 +94,7 @@ void ReliableRouter::sniffReceived(const MeshPacket *p, const Routing *c)
                             // - not DSR routing)
         if (p->want_ack) {
             if (MeshModule::currentReply)
-                DEBUG_MSG("Someone else has replied to this message, no need for a 2nd ack\n");
+                DEBUG_MSG("Some other module has replied to this message, no need for a 2nd ack\n");
             else
                 sendAckNak(Routing_Error_NONE, getFrom(p), p->id, p->channel);
         }
@@ -106,7 +108,7 @@ void ReliableRouter::sniffReceived(const MeshPacket *p, const Routing *c)
         // We intentionally don't check wasSeenRecently, because it is harmless to delete non existent retransmission records
         if (ackId || nakId) {
             if (ackId) {
-                DEBUG_MSG("Received a ack for 0x%x, stopping retransmissions\n", ackId);
+                DEBUG_MSG("Received an ack for 0x%x, stopping retransmissions\n", ackId);
                 stopRetransmission(p->to, ackId);
             } else {
                 DEBUG_MSG("Received a nak for 0x%x, stopping retransmissions\n", nakId);
@@ -231,4 +233,4 @@ void ReliableRouter::setNextTx(PendingPacket *pending)
     DEBUG_MSG("Setting next retransmission in %u msecs: ", d);
     printPacket("", pending->packet);
     setReceivedMessage(); // Run ASAP, so we can figure out our correct sleep time
-}
+}

src/mesh/Router.cpp

@@ -11,7 +11,7 @@ extern "C" {
 #include "mesh/compression/unishox2.h"
 }
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
 #include "mqtt/MQTT.h"
 #endif
 
@@ -115,14 +115,10 @@ MeshPacket *Router::allocForSending()
 {
     MeshPacket *p = packetPool.allocZeroed();
 
-    p->which_payloadVariant = MeshPacket_decoded_tag; // Assume payload is decoded at start.
+    p->which_payload_variant = MeshPacket_decoded_tag; // Assume payload is decoded at start.
     p->from = nodeDB.getNodeNum();
     p->to = NODENUM_BROADCAST;
-    if (config.lora.hop_limit && config.lora.hop_limit <= HOP_MAX) {
-        p->hop_limit = (config.lora.hop_limit >= HOP_MAX) ? HOP_MAX : config.lora.hop_limit;
-    } else {
-        p->hop_limit = HOP_RELIABLE;
-    }
+    p->hop_limit = (config.lora.hop_limit >= HOP_MAX) ? HOP_MAX : config.lora.hop_limit;
     p->id = generatePacketId();
     p->rx_time =
         getValidTime(RTCQualityFromNet); // Just in case we process the packet locally - make sure it has a valid timestamp
@@ -206,14 +202,14 @@ ErrorCode Router::send(MeshPacket *p)
 
     // If the packet hasn't yet been encrypted, do so now (it might already be encrypted if we are just forwarding it)
 
-    assert(p->which_payloadVariant == MeshPacket_encrypted_tag ||
-           p->which_payloadVariant == MeshPacket_decoded_tag); // I _think_ all packets should have a payload by now
+    assert(p->which_payload_variant == MeshPacket_encrypted_tag ||
+           p->which_payload_variant == MeshPacket_decoded_tag); // I _think_ all packets should have a payload by now
 
     // If the packet is not yet encrypted, do so now
-    if (p->which_payloadVariant == MeshPacket_decoded_tag) {
+    if (p->which_payload_variant == MeshPacket_decoded_tag) {
         ChannelIndex chIndex = p->channel; // keep as a local because we are about to change it
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
         // check if we should send decrypted packets to mqtt
 
         // truth table:
@@ -244,7 +240,7 @@ ErrorCode Router::send(MeshPacket *p)
             return encodeResult; // FIXME - this isn't a valid ErrorCode
         }
 
-#if defined(HAS_WIFI) || defined(PORTDUINO)
+#if HAS_WIFI
         // the packet is now encrypted.
         // check if we should send encrypted packets to mqtt
         if (mqtt && shouldActuallyEncrypt)
@@ -277,7 +273,7 @@ bool perhapsDecode(MeshPacket *p)
 
     // DEBUG_MSG("\n\n** perhapsDecode payloadVariant - %d\n\n", p->which_payloadVariant);
 
-    if (p->which_payloadVariant == MeshPacket_decoded_tag)
+    if (p->which_payload_variant == MeshPacket_decoded_tag)
         return true; // If packet was already decoded just return
 
     // assert(p->which_payloadVariant == MeshPacket_encrypted_tag);
@@ -304,7 +300,7 @@ bool perhapsDecode(MeshPacket *p)
                 DEBUG_MSG("Invalid portnum (bad psk?)!\n");
             } else {
                 // parsing was successful
-                p->which_payloadVariant = MeshPacket_decoded_tag; // change type to decoded
+                p->which_payload_variant = MeshPacket_decoded_tag; // change type to decoded
                 p->channel = chIndex;                             // change to store the index instead of the hash
 
                 /*
@@ -349,7 +345,7 @@ bool perhapsDecode(MeshPacket *p)
 Routing_Error perhapsEncode(MeshPacket *p)
 {
     // If the packet is not yet encrypted, do so now
-    if (p->which_payloadVariant == MeshPacket_decoded_tag) {
+    if (p->which_payload_variant == MeshPacket_decoded_tag) {
         static uint8_t bytes[MAX_RHPACKETLEN]; // we have to use a scratch buffer because a union
 
         size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), Data_fields, &p->decoded);
@@ -407,7 +403,7 @@ Routing_Error perhapsEncode(MeshPacket *p)
         // Copy back into the packet and set the variant type
         memcpy(p->encrypted.bytes, bytes, numbytes);
         p->encrypted.size = numbytes;
-        p->which_payloadVariant = MeshPacket_encrypted_tag;
+        p->which_payload_variant = MeshPacket_encrypted_tag;
     }
 
     return Routing_Error_NONE;