Update to 1.3.21

* Update EInkDisplay2.cpp

* Create pins_arduino.h

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/workflows/main_matrix.yml

@@ -38,7 +38,9 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
-
+          - board: m5stack-core
+          - board: m5stack-coreink
+          
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
@@ -93,6 +95,8 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: m5stack-core
+          - board: m5stack-coreink
 
     runs-on: ubuntu-latest
     steps:

bin/build-all.sh

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

src/graphics/EInkDisplay2.cpp

@@ -210,8 +210,7 @@ bool EInkDisplay::connect()
 #elif defined(M5_COREINK)
     auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-    delay(100);
-    adafruitDisplay->init(115200, true, 20, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
+    adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
     adafruitDisplay->setRotation(0);
     adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
 #endif

src/mesh/PhoneAPI.cpp

@@ -184,6 +184,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         // Advance when we have sent all of our config objects
         if (config_state > Config_lora_tag) {
             state = STATE_SEND_NODEINFO;
+            config_state = Config_device_tag;
         }
         break;
 

src/mesh/http/WiFiAPClient.cpp

@@ -222,7 +222,7 @@ bool initWifi(bool forceSoftAP)
 
                         // The configurations on softAP are from the espresif library
                         int ok = WiFi.softAP(wifiName, wifiPsw, 1, 1, 4);
-                        DEBUG_MSG("Starting hiddem WIFI AP: ssid=%s, ok=%d\n", wifiName, ok);
+                        DEBUG_MSG("Starting hidden WIFI AP: ssid=%s, ok=%d\n", wifiName, ok);
                     } else {
                         int ok = WiFi.softAP(wifiName, wifiPsw);
                         DEBUG_MSG("Starting WIFI AP: ssid=%s, ok=%d\n", wifiName, ok);

variants/m5stack_core/pins_arduino.h

@@ -0,0 +1,55 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define EXTERNAL_NUM_INTERRUPTS 16
+#define NUM_DIGITAL_PINS        20
+#define NUM_ANALOG_INPUTS       16
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 34)
+
+static const uint8_t TX = 1;
+static const uint8_t RX = 3;
+
+static const uint8_t TXD2 = 17;
+static const uint8_t RXD2 = 16;
+
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 22;
+
+static const uint8_t SS    = 5;
+static const uint8_t MOSI  = 23;
+static const uint8_t MISO  = 19;
+static const uint8_t SCK   = 18;
+
+static const uint8_t G23 = 23;
+static const uint8_t G19 = 19;
+static const uint8_t G18 = 18;
+static const uint8_t G3 = 3;
+static const uint8_t G16 = 16;
+static const uint8_t G21 = 21;
+static const uint8_t G2 = 2;
+static const uint8_t G12 = 12;
+static const uint8_t G15 = 15;
+static const uint8_t G35 = 35;
+static const uint8_t G36 = 36;
+static const uint8_t G25 = 25;
+static const uint8_t G26 = 26;
+static const uint8_t G1 = 1;
+static const uint8_t G17 = 17;
+static const uint8_t G22 = 22;
+static const uint8_t G5 = 5;
+static const uint8_t G13 = 13;
+static const uint8_t G0 = 0;
+static const uint8_t G34 = 34;
+
+static const uint8_t DAC1 = 25;
+static const uint8_t DAC2 = 26;
+
+static const uint8_t ADC1 = 35;
+static const uint8_t ADC2 = 36;
+
+#endif /* Pins_Arduino_h */

variants/m5stack_coreink/pins_arduino.h

@@ -0,0 +1,57 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define EXTERNAL_NUM_INTERRUPTS 16
+#define NUM_DIGITAL_PINS        40
+#define NUM_ANALOG_INPUTS       16
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(esp32_adc2gpio[(p)]):-1)
+#define digitalPinToInterrupt(p)    (((p)<40)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 34)
+
+#define TX2 -1
+#define RX2 -1
+
+static const uint8_t TX = 1;
+static const uint8_t RX = 3;
+
+static const uint8_t SDA = 32;
+static const uint8_t SCL = 33;
+
+static const uint8_t SS    = 9;
+static const uint8_t MOSI  = 23;
+static const uint8_t MISO  = 34;
+static const uint8_t SCK   = 18;
+
+static const uint8_t G26 = 26;
+static const uint8_t G36 = 36;
+static const uint8_t G25 = 25;
+
+static const uint8_t G32 = 32;
+static const uint8_t G33 = 33;
+
+static const uint8_t G21 = 21;
+static const uint8_t G22 = 22;
+
+static const uint8_t G13 = 13;
+static const uint8_t G14 = 14;
+
+static const uint8_t G12 = 12;
+static const uint8_t G19 = 19;
+
+static const uint8_t G5 = 5;
+static const uint8_t G10 = 10;
+static const uint8_t G2 = 2;
+static const uint8_t G37 = 37;
+static const uint8_t G38 = 38;
+static const uint8_t G39 = 39;
+
+static const uint8_t DAC1 = 25;
+static const uint8_t DAC2 = 26;
+
+static const uint8_t ADC1 = 35;
+static const uint8_t ADC2 = 36;
+
+#endif /* Pins_Arduino_h */

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 1
 minor = 3
-build = 20
+build = 21