Code updates to resolve build failures (#7406)

* Move BRC address code to a .cpp file since it will be used from multiple places.

* Nodelist with addresses

* Burning Man icon for BRC page

* Draw last-seen time instead of compass

This is likely more important - don't want to wander to a device that is off.

* Add the bearing list back to the cycled pages on oled devices

* Add bearings screen into the carousel of rotated screens

* trunk fmt

* fix build errors caused by trunk fmt

* correct swapped screen positions for BRC vs bearings display

* don't show playa position if unknown

.github/workflows/daily_packaging.yml

@@ -30,7 +30,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/release_channels.yml

@@ -20,7 +20,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          # - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-

.trunk/trunk.yaml

@@ -9,7 +9,7 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.450
-    - renovate@41.29.1
+    - renovate@41.30.5
     - prettier@3.6.2
     - trufflehog@3.89.2
     - yamllint@1.37.1

arch/stm32/stm32.ini

@@ -23,14 +23,20 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
-  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
+  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  ;-DDEBUG_MUTE
+  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/platformio-custom.py

@@ -3,6 +3,7 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+import subprocess
 import json
 import re
 
@@ -92,6 +93,17 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
+# get repository owner if git is installed
+try:
+    r_owner = (
+        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
+        .decode("utf-8")
+        .strip().split("/")
+    )
+    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
+except subprocess.CalledProcessError:
+    repo_owner = "unknown"
+
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -117,6 +129,7 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
+        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")

src/gps/GPS.cpp

@@ -39,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
-#if defined(RAK2560)
-HardwareSerial *GPS::_serial_gps = &Serial2;
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(GPS_SERIAL_PORT)
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif

src/gps/RTC.cpp

@@ -226,7 +226,14 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
+    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
+    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+#ifdef BUILD_EPOCH
+    if (tv.tv_sec < BUILD_EPOCH) {
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+        return RTCSetResultInvalidTime;
+    }
+#endif
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {

src/graphics/BRC.cpp

@@ -0,0 +1,156 @@
+#include "BRC.h"
+#include "GPSStatus.h"
+#include "gps/GeoCoord.h"
+#include "graphics/Screen.h"
+
+#if HAS_SCREEN
+
+using namespace meshtastic;
+
+const int32_t BRC_LATI = (40.786958 * 1e7);
+const int32_t BRC_LONI = (-119.202994 * 1e7);
+const double BRC_LATF = 40.786958;
+const double BRC_LONF = -119.202994;
+const double BRC_NOON = 1.5;
+const double RAD_TO_HOUR = (6.0 / 3.14159);
+const double METER_TO_FEET = 3.28084;
+const double FEET_TO_METER = 1.0 / METER_TO_FEET;
+
+// Pre-calculated street data for performance
+struct StreetInfo {
+    float center;
+    float width;
+    const char *name;
+};
+
+/*
+# python code to generate the StreetInfo
+
+esp_center = 2500
+street_info = [
+  # name, width, preceeding block depth
+  ('Esp', 40, 60), # block size is fake
+  ('A',   30, 400),
+  ('B',   30, 250),
+  ('C',   30, 250),
+  ('D',   30, 250),
+  ('E',   40, 250),
+  ('F',   30, 450), # E-F block is exra deep
+  ('G',   30, 250),
+  ('H',   30, 250),
+  ('I',   30, 250),
+  ('J',   30, 150),
+  ('K',   50, 150),
+]
+
+street_center = esp_center - street_info[0][1] //2 - street_info[0][2]
+last_center = esp_center
+for (name, street_width, block_width) in street_info:
+    offset = (street_width + block_width) // 2
+    street_center += street_width //2 + block_width
+
+    dia = street_center * 2
+    dist = street_center - last_center
+
+    print(f"{{{street_center}, {offset}, \"{name}\"}},\t// +{dist}ft\tdia: {dia:,}ft")
+
+    last_center = street_center
+    street_center += street_width //2
+
+street_center += 50 # extra buffer after the edge of k to include walk-in camping parking
+print(f"{{{street_center}, 0, nullptr}},\t// +{street_center-last_center}ft")
+*/
+
+static const StreetInfo streets[] = {
+    {2500, 50, "Esp"},  // +0ft	dia: 5,000ft
+    {2935, 215, "A"},   // +435ft	dia: 5,870ft
+    {3215, 140, "B"},   // +280ft	dia: 6,430ft
+    {3495, 140, "C"},   // +280ft	dia: 6,990ft
+    {3775, 140, "D"},   // +280ft	dia: 7,550ft
+    {4060, 145, "E"},   // +285ft	dia: 8,120ft
+    {4545, 240, "F"},   // +485ft	dia: 9,090ft
+    {4825, 140, "G"},   // +280ft	dia: 9,650ft
+    {5105, 140, "H"},   // +280ft	dia: 10,210ft
+    {5385, 140, "I"},   // +280ft	dia: 10,770ft
+    {5565, 90, "J"},    // +180ft	dia: 11,130ft
+    {5755, 100, "K"},   // +190ft	dia: 11,510ft
+    {5830, 0, nullptr}, // +75ft
+};
+
+BRCAddress::BRCAddress(int32_t lat, int32_t lon)
+{
+    bearing = GeoCoord::bearing(BRC_LATF, BRC_LONF, DegD(lat), DegD(lon)) * RAD_TO_HOUR;
+    bearing += 12.0 - BRC_NOON;
+    while (bearing > 12.0) {
+        bearing -= 12.0;
+    }
+
+    // In imperial units because that is how golden spike data is provided.
+    distance = GeoCoord::latLongToMeter(BRC_LATF, BRC_LONF, DegD(lat), DegD(lon)) * METER_TO_FEET;
+};
+
+int BRCAddress::radial(char *buf, size_t len)
+{
+    uint8_t hour = (uint8_t)(bearing);
+    uint8_t minute = (uint8_t)((bearing - hour) * 60.0);
+    hour %= 12;
+    if (hour == 0) {
+        hour = 12;
+    }
+    return snprintf(buf, len, "%d:%02d", hour, minute);
+};
+
+int BRCAddress::annular(char *buf, size_t len, bool noUnit)
+{
+    const char *unit = "m";
+    float unitMultiplier = FEET_TO_METER;
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+        unitMultiplier = 1.0;
+        unit = "ft";
+    }
+    if (noUnit)
+        unit = "";
+
+    if (bearing > 1.75 && bearing < 10.25) {
+        const char *street = nullptr;
+        float dist = 0;
+        // Find the appropriate street based on distance
+        for (const auto &s : streets) {
+            if (distance > s.center - s.width) {
+                street = s.name;
+                dist = distance - s.center;
+            } else {
+                break;
+            }
+        }
+        if (street) {
+            return snprintf(buf, len, "%s %d%s", street, int(dist * unitMultiplier), unit);
+        }
+    }
+
+    return snprintf(buf, len, "%d%s", int(distance * unitMultiplier), unit);
+};
+
+int BRCAddress::full(char *buf, size_t len)
+{
+    auto l = radial(buf, len - 4);
+    buf += l;
+    *(buf++) = ' ';
+    *(buf++) = '&';
+    *(buf++) = ' ';
+    buf += annular(buf, len - l - 4, false);
+    buf[l] = 0; // always null terminated
+    return l;
+};
+
+int BRCAddress::compact(char *buf, size_t len)
+{
+    auto l = radial(buf, len - 2);
+    buf += l;
+    *(buf++) = '&';
+    buf += annular(buf, len - l - 2, true);
+    buf[l] = 0; // always null terminated
+    return l;
+};
+
+#endif

src/graphics/BRC.h

@@ -0,0 +1,21 @@
+#pragma once
+
+// For size_t/int32_t types on some platforms.
+#include <cstdint>
+// For size_t
+#include <cstddef>
+
+class BRCAddress
+{
+  public:
+    BRCAddress(int32_t lat, int32_t lon);
+
+    int radial(char *buf, size_t len);
+    int annular(char *buf, size_t len, bool noUnit);
+    int full(char *buf, size_t len);
+    int compact(char *buf, size_t len);
+
+  private:
+    float bearing;
+    float distance;
+};

src/graphics/Screen.cpp

@@ -386,9 +386,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
-#ifdef HELTEC_TRACKER_V1_X
-            uint8_t tft_vext_enabled = digitalRead(VEXT_ENABLE);
-#endif
+
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -400,10 +398,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 
             dispdev->displayOn();
 #ifdef HELTEC_TRACKER_V1_X
-            // If the TFT VEXT power is not enabled, initialize the UI.
-            if (!tft_vext_enabled) {
-                ui->init();
-            }
+            ui->init();
 #endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
@@ -869,6 +864,8 @@ void Screen::setFrames(FrameFocus focus)
     uint8_t previousFrameCount = framesetInfo.frameCount;
     FramesetInfo fsi; // Location of specific frames, for applying focus parameter
 
+    graphics::UIRenderer::rebuildFavoritedNodes();
+
     LOG_DEBUG("Show standard frames");
     showingNormalScreen = true;
 
@@ -927,6 +924,12 @@ void Screen::setFrames(FrameFocus focus)
     normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
     indicatorIcons.push_back(icon_list);
 
+#if HAS_SCREEN
+    fsi.positions.nodelist_brc = numframes;
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawBRCList;
+    indicatorIcons.push_back(icon_bm);
+#endif
+
     fsi.positions.gps = numframes;
     normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
     indicatorIcons.push_back(icon_compass);
@@ -1379,9 +1382,12 @@ int Screen::handleInputEvent(const InputEvent *event)
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
                     menuHandler::LoraRegionPicker();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
-                           devicestate.rx_text_message.from) {
-                    menuHandler::messageResponseMenu();
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
+                    if (devicestate.rx_text_message.from) {
+                        menuHandler::messageResponseMenu();
+                    } else {
+                        menuHandler::textMessageBaseMenu();
+                    }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
@@ -1391,7 +1397,8 @@ int Screen::handleInputEvent(const InputEvent *event)
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
-                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings) {
+                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings ||
+                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_brc) {
                     menuHandler::nodeListMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.wifi) {
                     menuHandler::wifiBaseMenu();

src/graphics/Screen.h

@@ -662,6 +662,7 @@ class Screen : public concurrency::OSThread
             uint8_t nodelist_hopsignal = 255;
             uint8_t nodelist_distance = 255;
             uint8_t nodelist_bearings = 255;
+            uint8_t nodelist_brc = 255;
             uint8_t clock = 255;
             uint8_t firstFavorite = 255;
             uint8_t lastFavorite = 255;

src/graphics/SharedUIDisplay.cpp

@@ -206,7 +206,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
-        int iconRightEdge = timeX - 1;
+        int iconRightEdge = timeX - 2;
 
         bool showMail = false;
 

src/graphics/draw/ClockRenderer.cpp

@@ -186,7 +186,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 {
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-    int line = 1;
+
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
@@ -230,6 +230,8 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 
 #ifdef T_WATCH_S3
     float scale = 1.5;
+#elif defined(CHATTER_2)
+    float scale = 1.1;
 #else
     float scale = 0.75;
     if (isHighResolution) {
@@ -285,6 +287,9 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     int yOffset = (isHighResolution) ? 3 : 1;
 #ifdef SENSECAP_INDICATOR
     yOffset -= 3;
+#endif
+#ifdef T_DECK
+    yOffset -= 5;
 #endif
     if (config.display.use_12h_clock) {
         display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,

src/graphics/draw/DebugRenderer.cpp

@@ -483,7 +483,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 }
 
 // ****************************
-// *      Memory Screen       *
+// *      System Screen       *
 // ****************************
 void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -593,7 +593,19 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     }
     line += 1;
     char appversionstr[35];
-    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
+    snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
+    char appversionstr_formatted[40];
+    char *lastDot = strrchr(appversionstr, '.');
+    if (lastDot) {
+        size_t prefixLen = lastDot - appversionstr;
+        strncpy(appversionstr_formatted, appversionstr, prefixLen);
+        appversionstr_formatted[prefixLen] = '\0';
+        strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
+        strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
+        appversionstr[sizeof(appversionstr) - 1] = '\0';
+    }
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);

src/graphics/draw/MenuHandler.cpp

@@ -344,14 +344,37 @@ void menuHandler::homeBaseMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::textMessageBaseMenu()
+{
+    enum optionsNumbers { Back, Preset, Freetext, enumEnd };
+
+    static const char *optionsArray[enumEnd] = {"Back"};
+    static int optionsEnumArray[enumEnd] = {Back};
+    int options = 1;
+    optionsArray[options] = "New Preset Msg";
+    optionsEnumArray[options++] = Preset;
+    if (kb_found) {
+        optionsArray[options] = "New Freetext Msg";
+        optionsEnumArray[options++] = Freetext;
+    }
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Message Action";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsCount = options;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Preset) {
+            cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
+        } else if (selected == Freetext) {
+            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::systemBaseMenu()
 {
-    // Check if brightness is supported
-    bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
-    hasSupportBrightness = true;
-#endif
-
     enum optionsNumbers { Back, Notifications, ScreenOptions, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
@@ -421,11 +444,11 @@ void menuHandler::favoriteBaseMenu()
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == Preset) {
             cannedMessageModule->LaunchWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == 2 && kb_found) {
+        } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if ((!kb_found && selected == 2) || (selected == 3 && kb_found)) {
+        } else if (selected == Remove) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
         }
@@ -678,6 +701,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -729,7 +753,6 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
             screen->runNow();
         }
 
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
         if (selected != 0) {
             display->setColor(BLACK);
             display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
@@ -827,8 +850,9 @@ void menuHandler::removeFavoriteMenu()
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
+            LOG_INFO("Removing %x as favorite node", graphics::UIRenderer::currentFavoriteNodeNum);
             nodeDB->set_favorite(false, graphics::UIRenderer::currentFavoriteNodeNum);
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
+            screen->setFrames(graphics::Screen::FOCUS_DEFAULT);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -924,23 +948,28 @@ void menuHandler::screenOptionsMenu()
 {
     // Check if brightness is supported
     bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
     hasSupportBrightness = true;
 #endif
 
+#if defined(T_DECK)
+    // TDeck Doesn't seem to support brightness at all, at least not reliably
+    hasSupportBrightness = false;
+#endif
+
     enum optionsNumbers { Back, Brightness, ScreenColor };
     static const char *optionsArray[4] = {"Back"};
     static int optionsEnumArray[4] = {Back};
     int options = 1;
 
     // Only show brightness for B&W displays
-    if (hasSupportBrightness && !HAS_TFT) {
+    if (hasSupportBrightness) {
         optionsArray[options] = "Brightness";
         optionsEnumArray[options++] = Brightness;
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif

src/graphics/draw/MenuHandler.h

@@ -48,6 +48,7 @@ class menuHandler
     static void ClockFacePicker();
     static void messageResponseMenu();
     static void homeBaseMenu();
+    static void textMessageBaseMenu();
     static void systemBaseMenu();
     static void favoriteBaseMenu();
     static void positionBaseMenu();

src/graphics/draw/NodeListRenderer.cpp

@@ -6,6 +6,7 @@
 #include "UIRenderer.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h" // for getTime() function
+#include "graphics/BRC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
 #include "graphics/images.h"
@@ -87,6 +88,8 @@ const char *getCurrentModeTitle(int screenWidth)
 #endif
     case MODE_DISTANCE:
         return "Distance";
+    case MODE_BEARING:
+        return "Bearing";
     default:
         return "Nodes";
     }
@@ -309,6 +312,9 @@ void drawEntryDynamic(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     case MODE_DISTANCE:
         drawNodeDistance(display, node, x, y, columnWidth);
         break;
+    case MODE_BEARING:
+        drawEntryCompass(display, node, x, y, columnWidth);
+        break;
     default:
         break;
     }
@@ -335,6 +341,35 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     }
 }
 
+void drawEntryBRC(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth)
+{
+    bool isLeftCol = (x < SCREEN_WIDTH / 2);
+
+    // Adjust max text width depending on column and screen width
+    int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
+
+    const char *nodeName = getSafeNodeName(node);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    auto xText = x + ((isHighResolution) ? 6 : 3);
+    display->drawString(xText, y, nodeName);
+
+    if (nodeDB->hasValidPosition(node)) {
+        char buf[14] = "";
+        BRCAddress(node->position.latitude_i, node->position.longitude_i).compact(buf, 14);
+        auto nameWidth = display->getStringWidth("WWWW") - 2; // Fixed width so they are aligned.
+        display->drawString(xText + nameWidth, y, buf);
+    }
+
+    if (node->is_favorite) {
+        if (isHighResolution) {
+            drawScaledXBitmap16x16(x, y + 6, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint, display);
+        } else {
+            display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
+        }
+    }
+}
+
 void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
                       double userLat, double userLon)
 {
@@ -384,17 +419,46 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     */
 }
 
+void drawLastSeenExtra(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
+                       float /*myHeading*/, double /*userLat*/, double /*userLon*/)
+{
+    char timeStr[10];
+    uint32_t seconds = sinceLastSeen(node);
+    if (seconds == 0 || seconds == UINT32_MAX) {
+        snprintf(timeStr, sizeof(timeStr), "?");
+    } else {
+        uint32_t minutes = seconds / 60, hours = minutes / 60, days = hours / 24;
+        snprintf(timeStr, sizeof(timeStr), (days > 99 ? "?" : "%d%c"),
+                 (days    ? days
+                  : hours ? hours
+                          : minutes),
+                 (days    ? 'd'
+                  : hours ? 'h'
+                          : 'm'));
+    }
+
+    bool isLeftCol = (x < SCREEN_WIDTH / 2);
+    int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
+    int rightEdge = x + columnWidth - timeOffset;
+    if (timeStr[strlen(timeStr) - 1] == 'm') // Fix the fact that our fonts don't line up well all the time
+        rightEdge -= 1;
+    // display->setTextAlignment(TEXT_ALIGN_RIGHT);
+    int textWidth = display->getStringWidth(timeStr);
+    display->drawString(rightEdge - textWidth, y, timeStr);
+}
+
 // =============================
 // Main Screen Functions
 // =============================
 
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon)
+                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon,
+                        int totalColumns)
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
 
-    int columnWidth = display->getWidth() / 2;
+    int columnWidth = display->getWidth() / totalColumns;
 
     display->clear();
 
@@ -408,7 +472,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
 
     int visibleNodeRows = totalRowsAvailable;
-    int totalColumns = 2;
 
     int startIndex = scrollIndex * visibleNodeRows * totalColumns;
     if (nodeDB->getMeshNodeByIndex(startIndex)->num == nodeDB->getNodeNum()) {
@@ -446,7 +509,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     }
 
     // Draw column separator
-    if (shownCount > 0) {
+    if (shownCount > 0 && totalColumns > 1) {
         const int firstNodeY = y + 3;
         drawColumnSeparator(display, x, firstNodeY, lastNodeY);
     }
@@ -482,7 +545,31 @@ void drawDynamicNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state,
 
     // Render screen based on currentMode
     const char *title = getCurrentModeTitle(display->getWidth());
-    drawNodeListScreen(display, state, x, y, title, drawEntryDynamic);
+
+    if (currentMode == MODE_BEARING) {
+        float heading = 0;
+        bool validHeading = false;
+        auto ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+        double lat = DegD(ourNode->position.latitude_i);
+        double lon = DegD(ourNode->position.longitude_i);
+
+        if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+            if (screen->hasHeading()) {
+                heading = screen->getHeading(); // degrees
+                validHeading = true;
+            } else {
+                heading = screen->estimatedHeading(lat, lon);
+                validHeading = !isnan(heading);
+            }
+            if (!validHeading) {
+                lastRenderedMode = MODE_COUNT;
+                return;
+            }
+        }
+        drawNodeListScreen(display, state, x, y, title, drawEntryCompass, drawCompassArrow, heading, lat, lon);
+    } else {
+        drawNodeListScreen(display, state, x, y, title, drawEntryDynamic);
+    }
 
     // Track the last mode to avoid reinitializing modeStartTime
     lastRenderedMode = currentMode;
@@ -539,6 +626,11 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
     drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, heading, lat, lon);
 }
 
+void drawBRCList(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    drawNodeListScreen(display, state, x, y, "BRC", drawEntryBRC, drawLastSeenExtra, 0, 0, 0, 1);
+}
+
 /// Draw a series of fields in a column, wrapping to multiple columns if needed
 void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
 {
@@ -564,4 +656,4 @@ void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields
 
 } // namespace NodeListRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/NodeListRenderer.h

@@ -24,12 +24,12 @@ typedef void (*EntryRenderer)(OLEDDisplay *, meshtastic_NodeInfoLite *, int16_t,
 typedef void (*NodeExtrasRenderer)(OLEDDisplay *, meshtastic_NodeInfoLite *, int16_t, int16_t, int, float, double, double);
 
 // Node list mode enumeration
-enum NodeListMode { MODE_LAST_HEARD = 0, MODE_HOP_SIGNAL = 1, MODE_DISTANCE = 2, MODE_COUNT = 3 };
+enum NodeListMode { MODE_LAST_HEARD = 0, MODE_HOP_SIGNAL = 1, MODE_DISTANCE = 2, MODE_BEARING = 3, MODE_COUNT = 4 };
 
 // Main node list screen function
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
                         EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float heading = 0, double lat = 0,
-                        double lon = 0);
+                        double lon = 0, int totalColumns = 2);
 
 // Entry renderers
 void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth);
@@ -48,6 +48,7 @@ void drawHopSignalScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
 void drawDistanceScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 void drawDynamicNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+void drawBRCList(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
 // Utility functions
 const char *getCurrentModeTitle(int screenWidth);

src/graphics/draw/NotificationRenderer.cpp

@@ -156,7 +156,7 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
         resetBanner();
         return;
     }
-    if (curSelected == numDigits) {
+    if (curSelected == static_cast<int8_t>(numDigits)) {
         alertBannerCallback(currentNumber);
         resetBanner();
         return;

src/graphics/draw/UIRenderer.cpp

@@ -8,6 +8,7 @@
 #include "airtime.h"
 #include "configuration.h"
 #include "gps/GeoCoord.h"
+#include "graphics/BRC.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -24,6 +25,23 @@ extern graphics::Screen *screen;
 namespace graphics
 {
 NodeNum UIRenderer::currentFavoriteNodeNum = 0;
+std::vector<meshtastic_NodeInfoLite *> graphics::UIRenderer::favoritedNodes;
+
+void graphics::UIRenderer::rebuildFavoritedNodes()
+{
+    favoritedNodes.clear();
+    size_t total = nodeDB->getNumMeshNodes();
+    for (size_t i = 0; i < total; i++) {
+        meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+        if (!n || n->num == nodeDB->getNodeNum())
+            continue;
+        if (n->is_favorite)
+            favoritedNodes.push_back(n);
+    }
+
+    std::sort(favoritedNodes.begin(), favoritedNodes.end(),
+              [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
+}
 
 #if !MESHTASTIC_EXCLUDE_GPS
 // GeoCoord object for coordinate conversions
@@ -201,27 +219,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // **********************
 void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    // --- Cache favorite nodes for the current frame only, to save computation ---
-    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
-    static int prevFrame = -1;
 
-    // --- Only rebuild favorites list if we're on a new frame ---
-    if (state->currentFrame != prevFrame) {
-        prevFrame = state->currentFrame;
-        favoritedNodes.clear();
-        size_t total = nodeDB->getNumMeshNodes();
-        for (size_t i = 0; i < total; i++) {
-            meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-            // Skip nulls and ourself
-            if (!n || n->num == nodeDB->getNodeNum())
-                continue;
-            if (n->is_favorite)
-                favoritedNodes.push_back(n);
-        }
-        // Keep a stable, consistent display order
-        std::sort(favoritedNodes.begin(), favoritedNodes.end(),
-                  [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
-    }
     if (favoritedNodes.empty())
         return;
 
@@ -311,23 +309,12 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         display->drawString(x, getTextPositions(display)[line++], seenStr);
     }
 
-    // === 4. Uptime (only show if metric is present) ===
-    char uptimeStr[32] = "";
-    if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
-    }
-    if (uptimeStr[0] && line < 5) {
-        display->drawString(x, getTextPositions(display)[line++], uptimeStr);
+    // === 4. Burning Man location (only show if their position is known) ===
+    char brcStr[32] = "";
+    if (nodeDB->hasValidPosition(node) && line < 5) {
+        brcStr[0] = 32; // Space before the address to align with other rows.
+        BRCAddress(node->position.latitude_i, node->position.longitude_i).full(brcStr + 1, sizeof(brcStr) - 1);
+        display->drawString(x, getTextPositions(display)[line++], brcStr);
     }
 
     // === 5. Distance (only if both nodes have GPS position) ===
@@ -657,7 +644,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
 
     char combinedName[50];
     snprintf(combinedName, sizeof(combinedName), "%s (%s)", longNameStr.empty() ? "" : longNameStr.c_str(), shortnameble);
-    if (SCREEN_WIDTH - (display->getStringWidth(longName) + display->getStringWidth(shortnameble)) > 10) {
+    if (SCREEN_WIDTH - (display->getStringWidth(combinedName)) > 10) {
         size_t len = strlen(combinedName);
         if (len >= 3 && strcmp(combinedName + len - 3, " ()") == 0) {
             combinedName[len - 3] = '\0'; // Remove the last three characters
@@ -668,7 +655,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
             nameX, ((rows == 4) ? getTextPositions(display)[line++] : getTextPositions(display)[line++]) + yOffset, combinedName);
     } else {
         // === LongName Centered ===
-        textWidth = display->getStringWidth(longName);
+        textWidth = display->getStringWidth(longNameStr.c_str());
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], longNameStr.c_str());
 
@@ -924,7 +911,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 
     // If GPS is off, no need to display these parts
-    if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
+    if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0 && gpsStatus->getHasLock()) {
 
         // === Second Row: Date ===
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true);
@@ -945,14 +932,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         snprintf(lonStr, sizeof(lonStr), " Lon: %.5f", geoCoord.getLongitude() * 1e-7);
         display->drawString(x, getTextPositions(display)[line++], lonStr);
 
-        // === Fifth Row: Altitude ===
-        char DisplayLineTwo[32] = {0};
-        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
-            snprintf(DisplayLineTwo, sizeof(DisplayLineTwo), " Alt: %.0fft", geoCoord.getAltitude() * METERS_TO_FEET);
-        } else {
-            snprintf(DisplayLineTwo, sizeof(DisplayLineTwo), " Alt: %.0im", geoCoord.getAltitude());
+        // === Fifth Row: Burning Man! ===
+        char addrStr[32];
+        BRCAddress(geoCoord.getLatitude(), geoCoord.getLongitude()).full(addrStr, sizeof(addrStr));
+        display->drawString(x, getTextPositions(display)[line++], addrStr);
+    } else {
+        meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+        // from cell phone?
+        if (nodeDB->hasValidPosition(ourNode)) {
+            char addrStr[32];
+            BRCAddress(ourNode->position.latitude_i, ourNode->position.longitude_i).full(addrStr, sizeof(addrStr));
+            display->drawString(x, getTextPositions(display)[line++], addrStr);
         }
-        display->drawString(x, getTextPositions(display)[line++], DisplayLineTwo);
     }
 
     // === Draw Compass if heading is valid ===
@@ -1228,4 +1219,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/draw/UIRenderer.h

@@ -61,6 +61,8 @@ class UIRenderer
     static void drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static NodeNum currentFavoriteNodeNum;
+    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
+    static void rebuildFavoritedNodes();
 
 // OEM screens
 #ifdef USERPREFS_OEM_TEXT

src/graphics/images.h

@@ -156,6 +156,18 @@ const uint8_t icon_list[] PROGMEM = {
     0x82  // Row 7: #.....#.
 };
 
+// ➤ The Man Icon (8x8)
+const uint8_t icon_bm[] PROGMEM = {
+    0x42, // Row 0: .#....#.
+    0x3C, // Row 1: ..####..
+    0x3C, // Row 2: ..####..
+    0x18, // Row 3: ...##...
+    0x18, // Row 4: ...##...
+    0x24, // Row 5: ..#..#..
+    0x24, // Row 6: ..#..#..
+    0x42  // Row 7: .#....#.
+};
+
 // 📶 Signal Bars Icon (left to right, small to large with spacing)
 const uint8_t icon_signal[] PROGMEM = {
     0b00000000, // ░░░░░░░

src/input/cardKbI2cImpl.cpp

@@ -67,4 +67,5 @@ void CardKbI2cImpl::init()
     }
 #endif
     inputBroker->registerSource(this);
+    kb_found = true;
 }

src/main.cpp

@@ -286,7 +286,7 @@ void lateInitVariant() {}
  */
 void printInfo()
 {
-    LOG_INFO("S:B:%d,%s", HW_VENDOR, optstr(APP_VERSION));
+    LOG_INFO("S:B:%d,%s,%s,%s", HW_VENDOR, optstr(APP_VERSION), optstr(APP_ENV), optstr(APP_REPO));
 }
 #ifndef PIO_UNIT_TESTING
 void setup()
@@ -515,25 +515,11 @@ void setup()
     LOG_INFO("Scan for i2c devices");
 #endif
 
-#if defined(I2C_SDA1) && defined(ARCH_RP2040)
-    Wire1.setSDA(I2C_SDA1);
-    Wire1.setSCL(I2C_SCL1);
-    Wire1.begin();
-    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
-#elif defined(I2C_SDA1) && !defined(ARCH_RP2040)
-    Wire1.begin(I2C_SDA1, I2C_SCL1);
-    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
-#elif defined(NRF52840_XXAA) && (WIRE_INTERFACES_COUNT == 2)
+#if defined(I2C_SDA1) || (defined(NRF52840_XXAA) && (WIRE_INTERFACES_COUNT == 2))
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
 #endif
 
-#if defined(I2C_SDA) && defined(ARCH_RP2040)
-    Wire.setSDA(I2C_SDA);
-    Wire.setSCL(I2C_SCL);
-    Wire.begin();
-    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
-#elif defined(I2C_SDA) && !defined(ARCH_RP2040)
-    Wire.begin(I2C_SDA, I2C_SCL);
+#if defined(I2C_SDA)
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
 #elif defined(ARCH_PORTDUINO)
     if (settingsStrings[i2cdev] != "") {

src/memGet.cpp

@@ -10,6 +10,10 @@
 #include "memGet.h"
 #include "configuration.h"
 
+#ifdef ARCH_STM32WL
+#include <malloc.h>
+#endif
+
 MemGet memGet;
 
 /**
@@ -24,6 +28,9 @@ uint32_t MemGet::getFreeHeap()
     return dbgHeapFree();
 #elif defined(ARCH_RP2040)
     return rp2040.getFreeHeap();
+#elif defined(ARCH_STM32WL)
+    struct mallinfo m = mallinfo();
+    return m.fordblks; // Total free space (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;
@@ -42,6 +49,9 @@ uint32_t MemGet::getHeapSize()
     return dbgHeapTotal();
 #elif defined(ARCH_RP2040)
     return rp2040.getTotalHeap();
+#elif defined(ARCH_STM32WL)
+    struct mallinfo m = mallinfo();
+    return m.arena; // Non-mmapped space allocated (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;

src/mesh/FloodingRouter.cpp

@@ -72,10 +72,11 @@ void FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 
                 tosend->hop_limit--; // bump down the hop count
 #if USERPREFS_EVENT_MODE
-                if (tosend->hop_limit > 2) {
+                // BURNING MESH!
+                if (tosend->hop_limit > 3) {
                     // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
-                    tosend->hop_start -= (tosend->hop_limit - 2);
-                    tosend->hop_limit = 2;
+                    tosend->hop_start -= (tosend->hop_limit - 3);
+                    tosend->hop_limit = 3;
                 }
 #endif
                 tosend->next_hop = NO_NEXT_HOP_PREFERENCE; // this should already be the case, but just in case

src/mesh/MeshTypes.h

@@ -38,7 +38,8 @@ enum RxSource {
 #define HOP_MAX 7
 
 /// We normally just use max 3 hops for sending reliable messages
-#define HOP_RELIABLE 3
+// BURNING MESH!
+#define HOP_RELIABLE 4
 
 // For old firmware or when falling back to flooding, there is no next-hop preference
 #define NO_NEXT_HOP_PREFERENCE 0

src/mesh/generated/meshtastic/admin.pb.h

@@ -7,9 +7,9 @@
 #include "meshtastic/channel.pb.h"
 #include "meshtastic/config.pb.h"
 #include "meshtastic/connection_status.pb.h"
+#include "meshtastic/device_ui.pb.h"
 #include "meshtastic/mesh.pb.h"
 #include "meshtastic/module_config.pb.h"
-#include "meshtastic/device_ui.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.

src/mesh/generated/meshtastic/config.pb.h

@@ -102,7 +102,11 @@ typedef enum _meshtastic_Config_DeviceConfig_BuzzerMode {
     meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY = 2,
     /* Non-notification system buzzer tones only.
  Buzzer is enabled only for non-notification tones such as button presses, startup, shutdown, but not for alerts. */
-    meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY = 3
+    meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY = 3,
+    /* Direct Message notifications only.
+ Buzzer is enabled only for direct messages and alerts, but not for button presses.
+ External notification config determines the specifics of the notification behavior. */
+    meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY = 4
 } meshtastic_Config_DeviceConfig_BuzzerMode;
 
 /* Bit field of boolean configuration options, indicating which optional
@@ -645,8 +649,8 @@ extern "C" {
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_RebroadcastMode)(meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY+1))
 
 #define _meshtastic_Config_DeviceConfig_BuzzerMode_MIN meshtastic_Config_DeviceConfig_BuzzerMode_ALL_ENABLED
-#define _meshtastic_Config_DeviceConfig_BuzzerMode_MAX meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY
-#define _meshtastic_Config_DeviceConfig_BuzzerMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_BuzzerMode)(meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY+1))
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_MAX meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_BuzzerMode)(meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY+1))
 
 #define _meshtastic_Config_PositionConfig_PositionFlags_MIN meshtastic_Config_PositionConfig_PositionFlags_UNSET
 #define _meshtastic_Config_PositionConfig_PositionFlags_MAX meshtastic_Config_PositionConfig_PositionFlags_SPEED

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -6,10 +6,10 @@
 #include <pb.h>
 #include <vector>
 #include "meshtastic/channel.pb.h"
-#include "meshtastic/mesh.pb.h"
-#include "meshtastic/telemetry.pb.h"
 #include "meshtastic/config.pb.h"
 #include "meshtastic/localonly.pb.h"
+#include "meshtastic/mesh.pb.h"
+#include "meshtastic/telemetry.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.

src/mesh/generated/meshtastic/mesh.pb.h

@@ -6,11 +6,11 @@
 #include <pb.h>
 #include "meshtastic/channel.pb.h"
 #include "meshtastic/config.pb.h"
+#include "meshtastic/device_ui.pb.h"
 #include "meshtastic/module_config.pb.h"
 #include "meshtastic/portnums.pb.h"
 #include "meshtastic/telemetry.pb.h"
 #include "meshtastic/xmodem.pb.h"
-#include "meshtastic/device_ui.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
@@ -247,32 +247,26 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO = 96,
     /* Elecrow CrowPanel Advance models, ESP32-S3 and TFT with SX1262 radio plugin */
     meshtastic_HardwareModel_CROWPANEL = 97,
-    /* *
- Lilygo LINK32 board with sensors */
+    /* Lilygo LINK32 board with sensors */
     meshtastic_HardwareModel_LINK_32 = 98,
-    /* *
- Seeed Tracker L1 */
+    /* Seeed Tracker L1 */
     meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1 = 99,
-    /* *
- Seeed Tracker L1 EINK driver */
+    /* Seeed Tracker L1 EINK driver */
     meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK = 100,
     /* Reserved ID for future and past use */
     meshtastic_HardwareModel_QWANTZ_TINY_ARMS = 101,
-    /* *
- Lilygo T-Deck Pro */
+    /* Lilygo T-Deck Pro */
     meshtastic_HardwareModel_T_DECK_PRO = 102,
-    /* *
- Lilygo TLora Pager */
+    /* Lilygo TLora Pager */
     meshtastic_HardwareModel_T_LORA_PAGER = 103,
-    /* *
- GAT562 Mesh Trial Tracker */
+    /* GAT562 Mesh Trial Tracker */
     meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER = 104,
-    /* *
- RAKwireless WisMesh Tag */
+    /* RAKwireless WisMesh Tag */
     meshtastic_HardwareModel_WISMESH_TAG = 105,
-    /* *
- RAKwireless WisBlock Core RAK3312 https://docs.rakwireless.com/product-categories/wisduo/rak3112-module/overview/ */
+    /* RAKwireless WisBlock Core RAK3312 https://docs.rakwireless.com/product-categories/wisduo/rak3112-module/overview/ */
     meshtastic_HardwareModel_RAK3312 = 106,
+    /* Elecrow ThinkNode M5 https://www.elecrow.com/wiki/ThinkNode_M5_Meshtastic_LoRa_Signal_Transceiver_ESP32-S3.html */
+    meshtastic_HardwareModel_THINKNODE_M5 = 107,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/generated/meshtastic/powermon.pb.h

@@ -11,7 +11,7 @@
 
 /* Enum definitions */
 /* Any significant power changing event in meshtastic should be tagged with a powermon state transition.
-If you are making new meshtastic features feel free to add new entries at the end of this definition. */
+ If you are making new meshtastic features feel free to add new entries at the end of this definition. */
 typedef enum _meshtastic_PowerMon_State {
     meshtastic_PowerMon_State_None = 0,
     meshtastic_PowerMon_State_CPU_DeepSleep = 1,
@@ -34,13 +34,13 @@ something like "S:PM:C,0x00001234,REASON" where the hex number is the bitmask of
     meshtastic_PowerMon_State_Screen_Drawing = 512,
     meshtastic_PowerMon_State_Wifi_On = 1024,
     /* GPS is actively trying to find our location
-See GPSPowerState for more details */
+ See GPSPowerState for more details */
     meshtastic_PowerMon_State_GPS_Active = 2048
 } meshtastic_PowerMon_State;
 
 /* What operation would we like the UUT to perform.
-note: senders should probably set want_response in their request packets, so that they can know when the state
-machine has started processing their request */
+ note: senders should probably set want_response in their request packets, so that they can know when the state
+ machine has started processing their request */
 typedef enum _meshtastic_PowerStressMessage_Opcode {
     /* Unset/unused */
     meshtastic_PowerStressMessage_Opcode_UNSET = 0,
@@ -67,7 +67,7 @@ typedef enum _meshtastic_PowerStressMessage_Opcode {
 
 /* Struct definitions */
 /* Note: There are no 'PowerMon' messages normally in use (PowerMons are sent only as structured logs - slogs).
-But we wrap our State enum in this message to effectively nest a namespace (without our linter yelling at us) */
+ But we wrap our State enum in this message to effectively nest a namespace (without our linter yelling at us) */
 typedef struct _meshtastic_PowerMon {
     char dummy_field;
 } meshtastic_PowerMon;

src/modules/CannedMessageModule.cpp

@@ -850,7 +850,13 @@ void CannedMessageModule::sendText(NodeNum dest, ChannelIndex channel, const cha
     this->waitingForAck = true;
 
     // Log outgoing message
-    LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+    LOG_INFO("Send message id=%u, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+
+    if (p->to != 0xffffffff) {
+        LOG_INFO("Proactively adding %x as favorite node", p->to);
+        nodeDB->set_favorite(true, p->to);
+        screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
+    }
 
     // Send to mesh and phone (even if no phone connected, to track ACKs)
     service->sendToMesh(p, RX_SRC_LOCAL, true);

src/modules/NodeInfoModule.cpp

@@ -14,6 +14,11 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 {
     auto p = *pptr;
 
+    if (p.is_licensed != owner.is_licensed) {
+        LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
+        return true;
+    }
+
     // Coerce user.id to be derived from the node number
     snprintf(p.id, sizeof(p.id), "!%08x", getFrom(&mp));
 

src/modules/PositionModule.cpp

@@ -266,9 +266,11 @@ meshtastic_MeshPacket *PositionModule::allocPositionPacket()
 
     LOG_INFO("Position packet: time=%i lat=%i lon=%i", p.time, p.latitude_i, p.longitude_i);
 
+#ifndef MESHTASTIC_EXCLUDE_ATAK
     // TAK Tracker devices should send their position in a TAK packet over the ATAK port
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER)
         return allocAtakPli();
+#endif
 
     return allocDataProtobuf(p);
 }

src/mqtt/MQTT.cpp

@@ -559,10 +559,8 @@ void MQTT::sendSubscriptions()
 
 int32_t MQTT::runOnce()
 {
-#if HAS_NETWORKING
     if (!moduleConfig.mqtt.enabled || !(moduleConfig.mqtt.map_reporting_enabled || channels.anyMqttEnabled()))
         return disable();
-
     bool wantConnection = wantsLink();
 
     perhapsReportToMap();
@@ -572,7 +570,7 @@ int32_t MQTT::runOnce()
         publishQueuedMessages();
         return 200;
     }
-
+#if HAS_NETWORKING
     else if (!pubSub.loop()) {
         if (!wantConnection)
             return 5000; // If we don't want connection now, check again in 5 secs
@@ -596,8 +594,10 @@ int32_t MQTT::runOnce()
         powerFSM.trigger(EVENT_CONTACT_FROM_PHONE); // Suppress entering light sleep (because that would turn off bluetooth)
         return 20;
     }
-#endif
+#else
+    // No networking available, return default interval
     return 30000;
+#endif
 }
 
 bool MQTT::isValidConfig(const meshtastic_ModuleConfig_MQTTConfig &config, MQTTClient *client)

src/platform/nrf52/architecture.h

@@ -49,6 +49,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_RAK2560
 #elif defined(WISMESH_TAP)
 #define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAP
+#elif defined(WISMESH_TAG)
+#define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAG
 #elif defined(GAT562_MESH_TRIAL_TRACKER)
 #define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
 #elif defined(RAK4630)
@@ -89,6 +91,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_POCKET
 #elif defined(NOMADSTAR_METEOR_PRO)
 #define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
+#elif defined(SEEED_WIO_TRACKER_L1_EINK)
+#define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK
 #elif defined(SEEED_WIO_TRACKER_L1)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
 #else

userPrefs.jsonc

@@ -1,10 +1,10 @@
 {
   // "USERPREFS_BUTTON_PIN": "36",
-  // "USERPREFS_CHANNELS_TO_WRITE": "3",
+  "USERPREFS_CHANNELS_TO_WRITE": "1",
   // "USERPREFS_CHANNEL_0_DOWNLINK_ENABLED": "false",
-  // "USERPREFS_CHANNEL_0_NAME": "REPLACEME",
-  // "USERPREFS_CHANNEL_0_PRECISION": "14",
-  // "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
+  "USERPREFS_CHANNEL_0_NAME": "Everyone",
+  "USERPREFS_CHANNEL_0_PRECISION": "0",
+  "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
   // "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
   // "USERPREFS_CHANNEL_1_DOWNLINK_ENABLED": "false",
   // "USERPREFS_CHANNEL_1_NAME": "NodeChat",
@@ -17,12 +17,12 @@
   // "USERPREFS_CHANNEL_2_PSK": "{ 0x15, 0x6f, 0xfe, 0x46, 0xd4, 0x56, 0x63, 0x8a, 0x54, 0x43, 0x13, 0xf2, 0xef, 0x6c, 0x63, 0x89, 0xf0, 0x06, 0x30, 0x52, 0xce, 0x36, 0x5e, 0xb1, 0xe8, 0xbb, 0x86, 0xe6, 0x26, 0x5b, 0x1d, 0x58 }",
   // "USERPREFS_CHANNEL_2_UPLINK_ENABLED": "false",
   // "USERPREFS_CONFIG_GPS_MODE": "meshtastic_Config_PositionConfig_GpsMode_ENABLED",
-  // "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
+  "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
   // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
   // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
   // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
   // "USERPREFS_CONFIG_DEVICE_ROLE": "meshtastic_Config_DeviceConfig_Role_CLIENT", // Defaults to CLIENT. ROUTER*, LOST AND FOUND, and REPEATER roles are restricted.
-  // "USERPREFS_EVENT_MODE": "1",
+  "USERPREFS_EVENT_MODE": "1",
   // "USERPREFS_FIXED_BLUETOOTH": "121212",
   // "USERPREFS_FIXED_GPS": "",
   // "USERPREFS_FIXED_GPS_ALT": "0",
@@ -32,16 +32,16 @@
   // "USERPREFS_CONFIG_GPS_UPDATE_INTERVAL": "600",
   // "USERPREFS_CONFIG_POSITION_BROADCAST_INTERVAL": "1800",
   // "USERPREFS_CONFIG_DEVICE_TELEM_UPDATE_INTERVAL": "900", // Device telemetry update interval in seconds
-  // "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
-  // "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
+  "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
+  "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO",
   // "USERPREFS_USE_ADMIN_KEY_0": "{ 0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c }",
   // "USERPREFS_USE_ADMIN_KEY_1": "{}",
   // "USERPREFS_USE_ADMIN_KEY_2": "{}",
-  // "USERPREFS_OEM_TEXT": "Caterham Car Club",
-  // "USERPREFS_OEM_FONT_SIZE": "0",
-  // "USERPREFS_OEM_IMAGE_WIDTH": "50",
-  // "USERPREFS_OEM_IMAGE_HEIGHT": "28",
-  // "USERPREFS_OEM_IMAGE_DATA": "{ 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x80, 0x0F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x61, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x67, 0x00, 0x00, 0x00, 0x18, 0x1F, 0xF0, 0x67, 0x00, 0x00, 0x00, 0x30, 0x1F, 0xF8, 0x33, 0x00, 0x00, 0x00, 0x30, 0x00, 0xFC, 0x31, 0x00, 0x00, 0x00, 0x60, 0x00, 0xFE, 0x18, 0x00, 0x00, 0x00, 0x60, 0x00, 0x7E, 0x18, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x3F, 0x0C, 0x00, 0x00, 0x00, 0xC0, 0x80, 0x1F, 0x0C, 0x00, 0x00, 0x00, 0x80, 0x81, 0x1F, 0x06, 0x00, 0x00, 0x00, 0x80, 0xC1, 0x0F, 0x06, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x8F, 0x01, 0x00, 0x00, 0x00, 0x00, 0xEE, 0xC7, 0x01, 0x00, 0x00, 0x00, 0x00, 0x0C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00}",
+  "USERPREFS_OEM_TEXT": "Burning Mesh 2025",
+  "USERPREFS_OEM_FONT_SIZE": "0",
+  "USERPREFS_OEM_IMAGE_WIDTH": "36",
+  "USERPREFS_OEM_IMAGE_HEIGHT": "56",
+  "USERPREFS_OEM_IMAGE_DATA": "{ 0x06, 0x00, 0x06, 0x00, 0x06, 0x0F, 0x00, 0x0F, 0x00, 0x0F, 0x1F, 0x80, 0x1F, 0x80, 0x0F, 0x1E, 0xC0, 0x3F, 0x80, 0x07, 0x3C, 0xE0, 0x7F, 0xC0, 0x03, 0x7C, 0xF0, 0xF9, 0xE0, 0x03, 0xF8, 0xF8, 0xF0, 0xF1, 0x01, 0xF0, 0xF0, 0xF0, 0xF0, 0x00, 0xE0, 0xF1, 0xF0, 0x78, 0x00, 0xE0, 0xE3, 0x79, 0x7C, 0x00, 0xC0, 0xE3, 0x79, 0x3C, 0x00, 0x80, 0xC7, 0x3F, 0x1E, 0x00, 0x80, 0xC7, 0x3F, 0x1E, 0x00, 0x00, 0x8F, 0x1F, 0x0F, 0x00, 0x00, 0x8F, 0x0F, 0x0F, 0x00, 0x00, 0x1E, 0x8F, 0x07, 0x00, 0x00, 0x1E, 0x86, 0x07, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x38, 0xC0, 0x01, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x1C, 0x80, 0x03, 0x00, 0x00, 0x1E, 0x80, 0x07, 0x00, 0x00, 0x1E, 0x80, 0x07, 0x00, 0x00, 0x0F, 0x00, 0x07, 0x00, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x80, 0x07, 0x00, 0x1E, 0x00, 0x80, 0x07, 0x00, 0x1E, 0x00, 0xC0, 0x03, 0x00, 0x1C, 0x00, 0xC0, 0x03, 0x00, 0x3C, 0x00, 0xC0, 0x03, 0x00, 0x3C, 0x00, 0xC0, 0x01, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00 }",
   // "USERPREFS_NETWORK_ENABLED_PROTOCOLS": "1", // Enable UDP mesh
   // "USERPREFS_NETWORK_WIFI_ENABLED": "true",
   // "USERPREFS_NETWORK_WIFI_SSID": "wifi_ssid",
@@ -52,8 +52,8 @@
   // "USERPREFS_MQTT_PASSWORD": "large4cats",
   // "USERPREFS_MQTT_ENCRYPTION_ENABLED": "true",
   // "USERPREFS_MQTT_TLS_ENABLED": "false",
-  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
+  "USERPREFS_MQTT_ROOT_TOPIC": "event/BurningMesh",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
-  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
+  "USERPREFS_TZ_STRING": "PST8PDT,M3.2.0,M11.1.0"
 }

variants/CDEBYTE_E77-MBL/platformio.ini

@@ -9,19 +9,9 @@ build_flags =
   -DSERIAL_UART_INSTANCE=1
   -DPIN_SERIAL_RX=PA3
   -DPIN_SERIAL_TX=PA2
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
-  -DMESHTASTIC_EXCLUDE_WIFI=1
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
   -DMESHTASTIC_EXCLUDE_GPS=1
-  -DMESHTASTIC_EXCLUDE_SCREEN=1
-  -DMESHTASTIC_EXCLUDE_MQTT=1
-  -DMESHTASTIC_EXCLUDE_POWERMON=1
   ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
   ;-DCFG_DEBUG
 

variants/rak2560/variant.h

@@ -222,6 +222,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // #define PIN_GPS_EN PIN_3V3_EN
 #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
 
+#define GPS_SERIAL_PORT Serial2
 // On RAK2560 the GPS is be on a different UART
 // #define GPS_RX_PIN PIN_SERIAL2_RX
 // #define GPS_TX_PIN PIN_SERIAL2_TX

variants/rak3172/platformio.ini

@@ -7,18 +7,8 @@ build_flags =
   -Ivariants/rak3172
   -DPIN_WIRE_SDA=PA11
   -DPIN_WIRE_SCL=PA12
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
-  -DMESHTASTIC_EXCLUDE_WIFI=1
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
   -DMESHTASTIC_EXCLUDE_GPS=1
-  -DMESHTASTIC_EXCLUDE_SCREEN=1
-  -DMESHTASTIC_EXCLUDE_MQTT=1
-  -DMESHTASTIC_EXCLUDE_POWERMON=1
   ;-DCFG_DEBUG
 upload_port = stlink

variants/rak_wismeshtag/platformio.ini

@@ -0,0 +1,15 @@
+; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
+[env:rak_wismeshtag]
+extends = nrf52840_base
+board = wiscore_rak4631
+board_check = true
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtag -D WISMESH_TAG -D RAK_4631
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtag>
+lib_deps = 
+  ${nrf52840_base.lib_deps}

variants/rak_wismeshtag/variant.cpp

@@ -0,0 +1,45 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    // 3V3 Power Rail
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/rak_wismeshtag/variant.h

@@ -0,0 +1,245 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_RAK4630_
+#define _VARIANT_RAK4630_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (35)
+#define PIN_LED2 (36)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+/*
+ * Buttons
+ */
+
+#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
+#define BUTTON_NEED_PULLUP
+#define PIN_BUTTON2 12
+#define PIN_BUTTON3 24
+#define PIN_BUTTON4 25
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (5)
+#define PIN_A1 (31)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+static const uint8_t A6 = PIN_A6;
+static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (15)
+#define PIN_SERIAL1_TX (16)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+#define PIN_SPI1_MISO (29) // (0 + 29)
+#define PIN_SPI1_MOSI (30) // (0 + 30)
+#define PIN_SPI1_SCK (3)   // (0 + 3)
+
+static const uint8_t SS = 42;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * eink display pins
+ */
+
+#define PIN_EINK_CS (0 + 26)
+#define PIN_EINK_BUSY (0 + 4)
+#define PIN_EINK_DC (0 + 17)
+#define PIN_EINK_RES (-1)
+#define PIN_EINK_SCLK (0 + 3)
+#define PIN_EINK_MOSI (0 + 30) // also called SDI
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+// RAK WISMESHTAG
+#define PIN_WIRE_SDA (25)
+#define PIN_WIRE_SCL (24)
+
+// QSPI Pins
+#define PIN_QSPI_SCK 3
+#define PIN_QSPI_CS 26
+#define PIN_QSPI_IO0 30
+#define PIN_QSPI_IO1 29
+#define PIN_QSPI_IO2 28
+#define PIN_QSPI_IO3 2
+
+
+/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
+   RAK5005-O <->  nRF52840
+   IO1       <->  P0.17 (Arduino GPIO number 17)
+   IO2       <->  P1.02 (Arduino GPIO number 34)
+   IO3       <->  P0.21 (Arduino GPIO number 21)
+   IO4       <->  P0.04 (Arduino GPIO number 4)
+   IO5       <->  P0.09 (Arduino GPIO number 9)
+   IO6       <->  P0.10 (Arduino GPIO number 10)
+   IO7       <->  P0.28 (Arduino GPIO number 28)
+   SW1       <->  P0.01 (Arduino GPIO number 1)
+   A0        <->  P0.04/AIN2 (Arduino Analog A2
+   A1        <->  P0.31/AIN7 (Arduino Analog A7
+   SPI_CS    <->  P0.26 (Arduino GPIO number 26)
+ */
+
+// RAK4630 LoRa module
+
+/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
+
+P1.10   NSS     SPI NSS (Arduino GPIO number 42)
+P1.11   SCK     SPI CLK (Arduino GPIO number 43)
+P1.12   MOSI    SPI MOSI (Arduino GPIO number 44)
+P1.13   MISO    SPI MISO (Arduino GPIO number 45)
+P1.14   BUSY    BUSY signal (Arduino GPIO number 46)
+P1.15   DIO1    DIO1 event interrupt (Arduino GPIO number 47)
+P1.06   NRESET  NRESET manual reset of the SX1262 (Arduino GPIO number 38)
+
+Important for successful SX1262 initialization:
+
+* Setup DIO2 to control the antenna switch
+* Setup DIO3 to control the TCXO power supply
+* Setup the SX1262 to use it's DCDC regulator and not the LDO
+* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
+control of the antenna switch
+
+SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
+
+*/
+
+#define DETECTION_SENSOR_EN 4
+
+#define USE_SX1262
+#define SX126X_CS (42)
+#define SX126X_DIO1 (47)
+#define SX126X_BUSY (46)
+#define SX126X_RESET (38)
+// #define SX126X_TXEN (39)
+// #define SX126X_RXEN (37)
+#define SX126X_POWER_EN (37)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Testing USB detection
+#define NRF_APM
+
+// enables 3.3V periphery like GPS or IO Module
+// Do not toggle this for GPS power savings
+#define PIN_3V3_EN (34)
+
+// RAK WISMESHTAG
+#define PIN_GPS_EN PIN_3V3_EN
+#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
+
+#define GPS_RX_PIN PIN_SERIAL1_RX
+#define GPS_TX_PIN PIN_SERIAL1_TX
+
+// RAK WISMESHTAG
+#define PIN_BUZZER 21 
+
+// Battery
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_A0
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define RAK_4631 1
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/seeed_wio_tracker_L1_eink/platformio.ini

@@ -4,7 +4,8 @@ extends = nrf52840_base, inkhud
 ;board_level = extra
 build_flags = ${nrf52840_base.build_flags}  ${inkhud.build_flags}
   -I $PROJECT_DIR/variants/seeed_wio_tracker_L1_eink
-  -D  SEEED_WIO_TRACKER_L1
+  -D SEEED_WIO_TRACKER_L1_EINK
+  -D SEEED_WIO_TRACKER_L1
   -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/seeed_wio_tracker_L1_eink> ${inkhud.build_src_filter}

variants/wio-e5/platformio.ini

@@ -10,12 +10,12 @@ build_flags =
   -DPIN_SERIAL_TX=PB6
   -DPIN_WIRE_SDA=PA15
   -DPIN_WIRE_SCL=PB15
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAS_SENSOR
+  -DHAS_SENSOR=1
+  -DENABLE_HWSERIAL2
+  -DPIN_SERIAL2_TX=PA2
+  -DPIN_SERIAL2_RX=PA3
+  -DHAS_GPS=1
+  -DGPS_SERIAL_PORT=Serial2
 
 upload_port = stlink
 

variants/wio-e5/variant.h

@@ -17,6 +17,8 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PB5
 #define LED_STATE_ON 1
 
+#define WIO_E5
+
 #if (defined(LED_BUILTIN) && LED_BUILTIN == PNUM_NOT_DEFINED)
 #undef LED_BUILTIN
 #define LED_BUILTIN (LED_PIN)