Merge branch 'master' into indicator-comms

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

.clusterfuzzlite/router_fuzzer.cpp

@@ -76,7 +76,7 @@ bool loopCanSleep()
 // Called just prior to starting Meshtastic. Allows for setting config values before startup.
 void lateInitVariant()
 {
-    portduino_config.logoutputlevel = level_error;
+    settingsMap[logoutputlevel] = level_error;
     channelFile.channels[0] = meshtastic_Channel{
         .has_settings = true,
         .settings =
@@ -132,7 +132,7 @@ int portduino_main(int argc, char **argv); // Renamed "main" function from Mesht
 // Start Meshtastic in a thread and wait till it has reached the ON state.
 int LLVMFuzzerInitialize(int *argc, char ***argv)
 {
-    portduino_config.maxtophone = 5;
+    settingsMap[maxtophone] = 5;
 
     meshtasticThread = std::thread([program = *argv[0]]() {
         char nodeIdStr[12];

.github/actions/setup-base/action.yml

@@ -5,12 +5,17 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
+    - name: Uncomment build epoch
+      shell: bash
+      run: |
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
     - name: Install dependencies
       shell: bash
       run: |
@@ -18,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_esp32.yml

@@ -0,0 +1,37 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware.bin
+          ota-firmware-target: release/bleota.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          #include-web-ui: true
+          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,37 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32-C3
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          #include-web-ui: true
+          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,37 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32-C6
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          #include-web-ui: true
+          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,37 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32-S3
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-s3.bin
+          ota-firmware-target: release/bleota-s3.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          #include-web-ui: true
+          arch: esp32s3

.github/workflows/build_firmware.yml

@@ -1,66 +0,0 @@
-name: Build
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      platform:
-        required: true
-        type: string
-      pio_env:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  pio-build:
-    name: build-${{ inputs.platform }}
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Set OTA firmware source and target
-        if: startsWith(inputs.platform, 'esp32')
-        id: ota_dir
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
-            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
-            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32" ]; then
-            echo "src=firmware.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Build ${{ inputs.platform }}
-        id: build
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ inputs.platform }}
-          pio_env: ${{ inputs.pio_env }}
-          pio_target: build
-          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
-          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
-          overwrite: true
-          path: |
-            release/*.bin
-            release/*.elf
-            release/*.uf2
-            release/*.hex
-            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -0,0 +1,30 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build NRF52
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
+            release/*.hex
+            release/*.uf2
+            release/*.elf
+            release/*.zip
+          arch: nrf52840

.github/workflows/build_one_arch.yml

@@ -1,500 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} extra)
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{inputs.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build-esp32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32s3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c6'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'nrf52840'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2040'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2350'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'stm32' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_one_target.yml

@@ -1,395 +0,0 @@
-name: Build One Target
-
-on:
-  workflow_dispatch:
-    inputs:
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
-jobs:
-  find-targets:
-    if: ${{ inputs.target == '' }}
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | sed 's/[][]//g; s/", "/\n- /g; s/"//g; s/^/- /' >> $GITHUB_STEP_SUMMARY
-
-  version:
-    if: ${{ inputs.target != '' }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build-arch:
-    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
-    strategy:
-      fail-fast: false
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    needs: [version, build-arch]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-*-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: debug-elfs-*-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' && inputs.target != '' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,28 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
+            release/*.uf2
+            release/*.elf
+          arch: rp2040

.github/workflows/build_stm32.yml

@@ -0,0 +1,29 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build STM32WL
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
+            release/*.hex
+            release/*.bin
+            release/*.elf
+          arch: stm32

.github/workflows/daily_packaging.yml

@@ -21,22 +21,16 @@ permissions:
 
 jobs:
   docker-multiarch:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_manifest.yml
     with:
       release_channel: daily
     secrets: inherit
 
   package-ppa:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, oracular, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily
@@ -44,7 +38,6 @@ jobs:
     secrets: inherit
 
   package-obs:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/package_obs.yml
     with:
       obs_project: network:Meshtastic:daily
@@ -52,7 +45,6 @@ jobs:
     secrets: inherit
 
   hook-copr:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/hook_copr.yml
     with:
       copr_project: daily

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -3,7 +3,7 @@ concurrency:
   group: ci-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 on:
-  # # Triggers the workflow on push but only for the main branches
+  # # Triggers the workflow on push but only for the master branch
   push:
     branches:
       - master
@@ -27,39 +27,21 @@ on:
 
 jobs:
   setup:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
-    runs-on: ubuntu-24.04
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+    runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Uncomment build epoch
-        shell: bash
-        run: |
-          sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-      - name: Generate matrix
-        id: jsonStep
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -70,26 +52,9 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
-  version:
-    if: github.repository == 'meshtastic/firmware'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
   check:
     needs: setup
     strategy:
@@ -97,9 +62,9 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -107,95 +72,69 @@ jobs:
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
+      board: ${{ matrix.board }}
 
-  build-esp32s3:
-    needs: [setup, version]
+  build-esp32-s3:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
+      board: ${{ matrix.board }}
 
-  build-esp32c3:
-    needs: [setup, version]
+  build-esp32-c3:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
+      board: ${{ matrix.board }}
 
-  build-esp32c6:
-    needs: [setup, version]
+  build-esp32-c6:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c6.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
+      board: ${{ matrix.board }}
 
-  build-nrf52840:
-    needs: [setup, version]
+  build-nrf52:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_nrf52.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
+      board: ${{ matrix.board }}
 
-  build-rp2040:
-    needs: [setup, version]
+  build-rpi2040:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_rpi2040.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
+      board: ${{ matrix.board }}
 
   build-stm32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_stm32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      board: ${{ matrix.board }}
 
   build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/build_debian_src.yml
     with:
       series: UNRELEASED
@@ -210,11 +149,10 @@ jobs:
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
   docker-deb-amd64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -223,7 +161,6 @@ jobs:
       push: false
 
   docker-deb-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -233,7 +170,6 @@ jobs:
       pio_env: native-tft
 
   docker-alp-amd64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -242,7 +178,6 @@ jobs:
       push: false
 
   docker-alp-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -252,7 +187,6 @@ jobs:
       pio_env: native-tft
 
   docker-deb-arm64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -261,7 +195,6 @@ jobs:
       push: false
 
   docker-deb-armv7:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -270,44 +203,32 @@ jobs:
       push: false
 
   gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    if: github.repository == 'meshtastic/firmware'
     permissions:
       contents: write
       pull-requests: write
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
-        version,
         build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-esp32-c6,
+        build-nrf52,
+        build-rpi2040,
         build-stm32,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -316,13 +237,17 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -336,9 +261,9 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -352,12 +277,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -365,59 +290,66 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name == 'workflow_dispatch' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
+          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
+          tag_name: v${{ steps.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -427,8 +359,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -436,30 +368,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware'}}
-    needs: [release-artifacts, version]
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -472,16 +400,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -491,30 +419,33 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
+    needs: [release-firmware]
     env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -528,9 +459,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
+          commit_message: ${{ steps.version.outputs.long }}
           enable_jekyll: true

.github/workflows/merge_queue.yml

@@ -1,508 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-env:
-  FAIL_FAST_PER_ARCH: true
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v5
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
-
-  build-esp32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/nightly.yml

@@ -8,13 +8,12 @@ permissions: read-all
 
 jobs:
   trunk_check:
-    if: github.repository == 'meshtastic/firmware'
     name: Trunk Check and Upload
     runs-on: ubuntu-24.04
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -22,7 +21,6 @@ jobs:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
 
   trunk_upgrade:
-    if: github.repository == 'meshtastic/firmware'
     # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
     name: Trunk Upgrade (PR)
     runs-on: ubuntu-24.04
@@ -31,7 +29,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,14 +24,14 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -1,24 +0,0 @@
-name: Check PR Labels
-
-on:
-  pull_request:
-    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
-
-permissions:
-  pull-requests: read
-  contents: read
-
-jobs:
-  check-label:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check for PR labels
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
-            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
-            if (!hasRequiredLabel) {
-              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
-            }

.github/workflows/pr_tests.yml

@@ -1,238 +0,0 @@
-name: Tests
-
-# DISABLED: Changed from automatic PR triggers to manual only
-on:
-  workflow_dispatch:
-    inputs:
-      reason:
-        description: "Reason for manual test run"
-        required: false
-        default: "Manual test execution"
-
-concurrency:
-  group: tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-  pull-requests: write
-
-jobs:
-  native-tests:
-    name: "🧪 Native Tests"
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/test_native.yml
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-
-  test-summary:
-    name: "📊 Test Results"
-    runs-on: ubuntu-latest
-    needs: [native-tests]
-    if: always()
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-      pull-requests: write
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Parse test results and create detailed summary
-        id: test-results
-        run: |
-          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Check overall job status first
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
-            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
-            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          else
-            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Parse detailed test results if available
-          if [ -f "testreport.xml" ]; then
-            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            
-            python3 << 'EOF'
-          import xml.etree.ElementTree as ET
-          import os
-
-          try:
-              tree = ET.parse('testreport.xml')
-              root = tree.getroot()
-              
-              total_tests = 0
-              passed_tests = 0
-              failed_tests = 0
-              skipped_tests = 0
-              
-              # Parse testsuite elements
-              for testsuite in root.findall('.//testsuite'):
-                  suite_name = testsuite.get('name', 'Unknown')
-                  suite_tests = int(testsuite.get('tests', '0'))
-                  suite_failures = int(testsuite.get('failures', '0'))
-                  suite_errors = int(testsuite.get('errors', '0'))
-                  suite_skipped = int(testsuite.get('skipped', '0'))
-                  
-                  total_tests += suite_tests
-                  failed_tests += suite_failures + suite_errors
-                  skipped_tests += suite_skipped
-                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
-                  
-                  if suite_tests > 0:
-                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
-                      print(f"**{status} Test Suite: {suite_name}**")
-                      print(f"- Total: {suite_tests}")
-                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
-                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
-                      if suite_skipped > 0:
-                          print(f"- Skipped: ⏭️ {suite_skipped}")
-                      print("")
-                      
-                      # Show individual test results for failed suites
-                      if suite_failures + suite_errors > 0:
-                          print("**Failed Tests:**")
-                          for testcase in testsuite.findall('testcase'):
-                              test_name = testcase.get('name', 'Unknown')
-                              failure = testcase.find('failure')
-                              error = testcase.find('error')
-                              
-                              if failure is not None:
-                                  msg = failure.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: {msg}")
-                              elif error is not None:
-                                  msg = error.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
-                          print("")
-                      else:
-                          # Show passed tests for successful suites
-                          passed_count = 0
-                          for testcase in testsuite.findall('testcase'):
-                              if testcase.find('failure') is None and testcase.find('error') is None:
-                                  if passed_count < 5:  # Limit to first 5 to avoid spam
-                                      test_name = testcase.get('name', 'Unknown')
-                                      print(f"- ✅ `{test_name}`: PASSED")
-                                  passed_count += 1
-                          if passed_count > 5:
-                              print(f"- ... and {passed_count - 5} more tests passed")
-                          print("")
-              
-              # Summary statistics
-              print("### 📊 Test Statistics")
-              print(f"- **Total Tests**: {total_tests}")
-              print(f"- **Passed**: ✅ {passed_tests}")
-              print(f"- **Failed**: ❌ {failed_tests}")
-              if skipped_tests > 0:
-                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
-              
-              if failed_tests > 0:
-                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
-              else:
-                  print(f"\n✅ **All {total_tests} tests passed!**")
-                  
-          except Exception as e:
-              print(f"❌ Error parsing test results: {e}")
-          EOF
-          else
-            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "---" >> $GITHUB_STEP_SUMMARY
-          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
-
-      - name: Comment test results on PR
-        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const fs = require('fs');
-
-            // Read the step summary to use as PR comment
-            let testSummary = "## 🧪 Test Results Summary\n\n";
-
-            if ("${{ needs.native-tests.result }}" === "success") {
-              testSummary += "✅ **All tests passed!**\n\n";
-            } else if ("${{ needs.native-tests.result }}" === "failure") {
-              testSummary += "❌ **Some tests failed.**\n\n";
-            } else {
-              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
-            }
-
-            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
-            testSummary += "---\n";
-            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
-
-            // Find existing comment
-            const comments = await github.rest.issues.listComments({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-
-            const botComment = comments.data.find(comment => 
-              comment.user.type === 'Bot' && 
-              comment.body.includes('🧪 Test Results Summary')
-            );
-
-            if (botComment) {
-              // Update existing comment
-              await github.rest.issues.updateComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                comment_id: botComment.id,
-                body: testSummary
-              });
-            } else {
-              // Create new comment
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: context.issue.number,
-                body: testSummary
-              });
-            }
-
-      - name: Set overall status
-        run: |
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "All tests passed! ✅"
-            exit 0
-          else
-            echo "Some tests failed! ❌"
-            exit 1
-          fi

.github/workflows/release_channels.yml

@@ -20,11 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, oracular, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -60,10 +56,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -103,9 +99,8 @@ jobs:
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version
-          labels: github_actions
           title: Bump release version
-          commit-message: Automated version bumps
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,7 +13,6 @@ permissions:
 
 jobs:
   semgrep-full:
-    if: github.repository == 'meshtastic/firmware'
     runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
@@ -21,7 +20,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -11,13 +11,12 @@ permissions:
 
 jobs:
   stale_issues:
-    if: github.repository == 'meshtastic/firmware'
     name: Close Stale Issues
     runs-on: ubuntu-latest
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.1.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -12,15 +12,13 @@ permissions:
 
 jobs:
   native-tests:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
-    if: github.repository == 'meshtastic/firmware'
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,7 +45,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v4
         with:
           node-version: 22
 

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -34,9 +34,7 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
-          labels: submodules
           title: Update protobufs and classes
-          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.25.0
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.2
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.473
-    - renovate@41.132.5
+    - checkov@3.2.447
+    - renovate@41.17.2
     - prettier@3.6.2
-    - trufflehog@3.90.8
+    - trufflehog@3.89.2
     - yamllint@1.37.1
-    - bandit@1.8.6
-    - trivy@0.67.0
-    - taplo@0.10.0
-    - ruff@0.13.2
+    - bandit@1.8.5
+    - trivy@0.64.0
+    - taplo@0.9.3
+    - ruff@0.12.1
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.14.0
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
-    - shellcheck@0.11.0
-    - black@25.9.0
+    - shellcheck@0.10.0
+    - black@25.1.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.13-bookworm AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:trixie-slim
+FROM debian:bookworm-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7t64 libssl3t64 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

arch/esp32/esp32.ini

@@ -36,7 +36,6 @@ build_flags =
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
-  -DSERIAL_HAS_ON_RECEIVE
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
@@ -55,8 +54,8 @@ lib_deps =
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,6 +17,7 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -29,19 +30,14 @@ lib_deps =
   lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
-  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
-	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}
-  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST=1
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
@@ -52,7 +48,4 @@ build_flags =
   -std=gnu17
   -std=c++17
 
-lib_ignore =
-  Adafruit NeoPixel
-  Adafruit ST7735 and ST7789 Library
-  SD
+lib_ignore = Adafruit NeoPixel

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -23,20 +23,14 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
-  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
-  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -50,7 +44,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  OneButton
+  mathertel/OneButton@2.6.1

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-firmware.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
 export PIP_BREAK_SYSTEM_PACKAGES=1
 
 if (echo $2 | grep -q "esp32"); then
@@ -9,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rp2xx0.sh $1
+  bin/build-rpi2040.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/build-native.sh

@@ -25,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg install --environment "$PIO_ENV" || platformioFailed
+pio pkg update --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
 cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rpi2040.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/config-dist.yaml

@@ -199,10 +199,6 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
 
 
-Config:
-#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
-#  DisplayMode: COLOR # uncomment to force MUI
-
 General:
   MaxNodes: 200
   MaxMessageQueue: 100

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,8 +0,0 @@
-Lora:
-  ### RAK13300in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  spidev: spidev0.1
-  # CS: 7

bin/config.d/lora-RAK6421.yaml

@@ -9,4 +9,13 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -1,52 +0,0 @@
-# https://www.waveshare.com/pico-lora-sx1262-868m.htm
-# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
-#
-# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
-#
-# Pin Connection
-# Waveshare       Orange Pi Zero3
-#   36    3.3V        17
-#   15    MOSI        19
-#   16    MISO        21  
-#   14    CLK         23
-#   38    GND         25
-#   4     BUSY        18
-#   20    RESET       22
-#   5     CS          24
-#   26    DIO1/IRQ    26
-
-Lora:
-  Module: sx1262  # Waveshare Raspberry Pico Lora module
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  # Specify either the spidev1_1 or the CS below, not both!
-  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
-  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
-#  CS:             # CS     PIN_24 -> chip 1, line 233
-#    pin: 24
-#    gpiochip: 1
-#    line: 233
-  SCK:            # SCK     PIN_23 -> chip 1, line 230
-    pin: 23
-    gpiochip: 1
-    line: 230
-  Busy:           # BUSY    PIN_18 -> chip 1, line 78
-    pin: 18
-    gpiochip: 1
-    line: 78
-  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
-    pin: 19
-    gpiochip: 1
-    line: 231
-  MISO:           # MISO    PIN_21 -> chip 1, line 232
-    pin: 21
-    gpiochip: 1
-    line: 232
-  Reset:          # NRST    PIN_22 -> chip 1, line 71
-    pin: 22
-    gpiochip: 1
-    line: 71
-  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
-    pin: 26
-    gpiochip: 1
-    line: 74

bin/device-install.bat

@@ -7,7 +7,6 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
-SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -15,12 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
@@ -102,6 +100,7 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -121,10 +120,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,15 +164,6 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
-FOR %%a IN (%MUIDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %MUIDB_8MB%.
-        SET "MUIDB8=1"
-        GOTO end_loop_muidb_8mb
-    )
-)
-:end_loop_muidb_8mb
-
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -183,7 +174,6 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -228,12 +218,6 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUIDB 8mb.
-IF %MUIDB8% EQU 1 (
-    SET "OTA_OFFSET=0x5D0000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -1,47 +1,47 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
-    "crowpanel-esp32s3"
-    "heltec_capsule_sensor_v3"
-    "heltec-v3"
-    "heltec-vision-master-e213"
-    "heltec-vision-master-e290"
-    "heltec-vision-master-t190"
-    "heltec-wireless-paper"
-    "heltec-wireless-tracker"
-    "heltec-wsl-v3"
-    "icarus"
-    "seeed-xiao-s3"
-    "tbeam-s3-core"
-    "tracksenger"
-)
-MUIDB_8MB=(
-    "picomputer-s3"
-    "unphone"
-    "seeed-sensecap-indicator"
+	# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ $FILENAME == *"-tft-"* ]]; then
+    TFT_BUILD=true
+fi
+
+# Extract BASENAME from %FILENAME% for later use.r-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
-    "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
     "t-eth-elite"
-    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -52,7 +52,6 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -112,8 +111,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-        BPS_RESET=true
-        ;;
+		    BPS_RESET=true
+		    ;;
     --) # Stop parsing options
         shift
         break
@@ -127,7 +126,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -164,13 +163,6 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
-    for variant in "${MUIDB_8MB[@]}"; do
-        if [ -z "${FILENAME##*"$variant"*}" ]; then
-            OFFSET=0x670000
-            OTA_OFFSET=0x5D0000
-        fi
-    done
-
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -214,8 +206,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -146,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -1,13 +1,8 @@
-#!/usr/bin/env bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -36,16 +31,17 @@ EOF
 }
 
 # Check for --change-mode and remove it from arguments
-NEW_ARGS=()
+NEW_ARGS=""
 for arg in "$@"; do
     if [ "$arg" = "--change-mode" ]; then
         CHANGE_MODE=true
     else
-        NEW_ARGS+=("$arg")
+        NEW_ARGS="$NEW_ARGS \"\$arg\""
     fi
 done
 
-set -- "${NEW_ARGS[@]}"
+# Reset positional parameters to filtered list
+eval set -- $NEW_ARGS
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in
@@ -69,7 +65,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +76,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -2,71 +2,50 @@
 
 """Generate the CI matrix."""
 
+import configparser
 import json
+import os
 import sys
 import random
-import re
-from platformio.project.config import ProjectConfig
+
+rootdir = "variants/"
 
 options = sys.argv[1:]
 
 outlist = []
 
 if len(options) < 1:
-  print(json.dumps(outlist))
-  exit(1)
+    print(json.dumps(outlist))
+    exit()
 
-cfg = ProjectConfig.get_instance()
-pio_envs = cfg.envs()
-
-# Gather all PlatformIO environments for filtering later
-all_envs = []
-for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
-  env_platform = None
-  for flag in env_build_flags:
-    # Extract the platform from the build flags
-    # Example flag: -I variants/esp32s3/heltec-v3
-    match = re.search(r"-I\s?variants/([^/]+)", flag)
-    if match:
-      env_platform = match.group(1)
-      break
-  # Intentionally fail if platform cannot be determined
-  if not env_platform:
-    print(f"Error: Could not determine platform for environment '{pio_env}'")
-    exit(1)
-  # Store env details as a dictionary, and add to 'all_envs' list
-  env = {
-    'name': pio_env,
-    'platform': env_platform,
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
-  }
-  all_envs.append(env)
-
-# Filter outputs based on options
-# Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
-  for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
-      else:
-        outlist.append(env['name'])
-# Filter (non-check) builds by platform
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+                        # Add the TFT variants if the base variant is selected
+                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
+if ("quick" in options) & (len(outlist) > 3):
+    print(json.dumps(random.sample(outlist, 3)))
 else:
-  for env in all_envs:
-    if options[0] == env['platform']:
-      # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
-      # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
-      # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
-
-# Return as a JSON list
-print(json.dumps(outlist))
+    print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,36 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.12" date="2025-10-01">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
-    </release>
-    <release version="2.7.11" date="2025-09-24">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.11</url>
-    </release>
-    <release version="2.7.10" date="2025-09-18">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.10</url>
-    </release>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
-    <release version="2.7.7" date="2025-08-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
-    </release>
-    <release version="2.7.6" date="2025-08-12">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
-    </release>
-    <release version="2.7.5" date="2025-08-09">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
-    </release>
-    <release version="2.7.4" date="2025-07-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
-    </release>
-    <release version="2.7.3" date="2025-07-10">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
-    </release>
     <release version="2.7.2" date="2025-07-04">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
     </release>

bin/platformio-custom.py

@@ -3,11 +3,8 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import subprocess
 import json
 import re
-import time
-from datetime import datetime
 
 from readprops import readProps
 
@@ -95,17 +92,6 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
-# get repository owner if git is installed
-try:
-    r_owner = (
-        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
-        .decode("utf-8")
-        .strip().split("/")
-    )
-    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
-except subprocess.CalledProcessError:
-    repo_owner = "unknown"
-
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -127,16 +113,10 @@ for pref in userPrefs:
         pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
 
 # General options that are passed to the C and C++ compilers
-# Calculate unix epoch for current day (midnight)
-current_date = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
-build_epoch = int(current_date.timestamp())
-
 flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-        "-DAPP_REPO=" + repo_owner,
-        "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
 print ("Using flags:")

boards/heltec_mesh_node_t114.json

@@ -10,8 +10,7 @@
     "hwids": [
       ["0x239A", "0x4405"],
       ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
+      ["0x239A", "0x002A"]
     ],
     "usb_product": "HT-n5262",
     "mcu": "nrf52840",

boards/heltec_mesh_solar.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x0071"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_solar",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshsolar/",
-  "vendor": "Heltec"
-}

boards/heltec_v4.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_16MB.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "qspi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "heltec_v4"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "heltec_wifi_lora_32 v4 (16 MB FLASH, 2 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 2097152,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://heltec.org/",
-  "vendor": "heltec"
-}

boards/meshtiny.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MeshTiny",
-    "mcu": "nrf52840",
-    "variant": "meshtiny",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "MeshTiny",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://github.com/meshtastic/firmware",
-  "vendor": "MTools Tec"
-}

boards/r1-neo.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "Muzi R1 Neo",
-    "mcu": "nrf52840",
-    "variant": "r1-neo",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "WisCore RAK4631 Board",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://muzi.works/",
-  "vendor": "Muzi Works"
-}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "partition-table-8MB.csv",
+      "partitions": "default_8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/t-deck-pro.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_qspi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://lilygo.cc/products/t-deck-pro",
-  "vendor": "LilyGo"
-}

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "partition-table-8MB.csv"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,13 +1,31 @@
-meshtasticd (2.7.12.0) unstable; urgency=medium
+meshtasticd (2.7.2.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
-  * Version 2.5.19
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
 
   [  ]
   * GitHub Actions Automatic version bump
 
-  [ GitHub Actions ]
-  * Version 2.7.12
+  [  ]
+  * GitHub Actions Automatic version bump
 
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 01 Oct 2025 19:51:41 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Fri, 04 Jul 2025 11:58:01 +0000

debian/ci_changelog.sh

@@ -1,8 +1,7 @@
 #!/usr/bin/bash
-export DEBFULLNAME="GitHub Actions"
 export DEBEMAIL="github-actions[bot]@users.noreply.github.com"
 PKG_VERSION=$(python3 bin/buildinfo.py short)
 
 dch --newversion "$PKG_VERSION.0" \
-	--distribution unstable \
-	"Version $PKG_VERSION"
+	--distribution UNRELEASED \
+	"GitHub Actions Automatic version bump"

partition-table-8MB.csv

@@ -1,7 +0,0 @@
-# This is a layout for 8MB of flash for MUI devices
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x5C0000,
-flashApp, app,  ota_1,   0x5D0000,0x0A0000,
-spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -6,8 +6,7 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/*/platformio.ini
-	variants/*/diy/*/platformio.ini
+	variants/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -53,18 +52,16 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
+	#-DBUILD_EPOCH=$UNIX_TIME
 	#-D OLED_PL=1
-	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
-	#-D DEBUG_LOOP_TIMING=1 ; uncomment to add main loop timing logs
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
-	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
-	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	mathertel/OneButton@2.6.1
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -104,29 +101,21 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.3.0
+	jgromes/RadioLib@7.2.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/9ed5355a24059750e9b2eb5d669574d9ea42a37b.zip
+	https://github.com/meshtastic/device-ui/archive/8c7092c73425adfda1aac8c6960df06cd85f6d92.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.4
+	adafruit/Adafruit BusIO@1.17.1
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -140,7 +129,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.3
+	adafruit/Adafruit INA260 Library@1.5.2
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
@@ -159,8 +148,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -179,8 +168,6 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -190,7 +177,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
+	adafruit/Adafruit SHTC3 Library@1.0.1
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

renovate.json

@@ -8,7 +8,6 @@
     "replacements:all",
     "workarounds:all"
   ],
-  "baseBranchPatterns": ["master"],
   "forkProcessing": "enabled",
   "ignoreDeps": [
     "protobufs"

src/AmbientLightingThread.h

@@ -183,9 +183,9 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);

src/AudioThread.h

@@ -26,7 +26,6 @@ class AudioThread : public concurrency::OSThread
         i2sRtttl->begin(rtttlFile, audioOut);
     }
 
-    // Also handles actually playing the RTTTL, needs to be called in loop
     bool isPlaying()
     {
         if (i2sRtttl != nullptr) {

src/BluetoothStatus.h

@@ -89,22 +89,14 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, LOW);
-#else
                 digitalWrite(BLE_LED, HIGH);
-#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, HIGH);
-#else
                 digitalWrite(BLE_LED, LOW);
-#endif
 #endif
                 break;
             }

src/DebugConfiguration.cpp

@@ -146,7 +146,7 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
 {
     int result;
 #ifdef ARCH_PORTDUINO
-    bool utf = !portduino_config.ascii_logs;
+    bool utf = !settingsMap[ascii_logs];
 #else
     bool utf = true;
 #endif

src/DebugConfiguration.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-// Forward declarations
-#if defined(DEBUG_HEAP)
-class MemGet;
-extern MemGet memGet;
-#endif
-
 // DEBUG LED
 #ifndef LED_STATE_ON
 #define LED_STATE_ON 1
@@ -29,7 +23,6 @@ extern MemGet memGet;
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
 #define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
-#define MESHTASTIC_LOG_LEVEL_HEAP "HEAP"
 
 #include "SerialConsole.h"
 
@@ -69,25 +62,6 @@ extern MemGet memGet;
 #endif
 #endif
 
-#if defined(DEBUG_HEAP)
-#define LOG_HEAP(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_HEAP, __VA_ARGS__)
-
-// Macro-based heap debugging
-#define DEBUG_HEAP_BEFORE auto heapBefore = memGet.getFreeHeap();
-#define DEBUG_HEAP_AFTER(context, ptr)                                                                                           \
-    do {                                                                                                                         \
-        auto heapAfter = memGet.getFreeHeap();                                                                                   \
-        if (heapBefore != heapAfter) {                                                                                           \
-            LOG_HEAP("Alloc in %s pointer 0x%x, size: %u, free: %u", context, ptr, heapBefore - heapAfter, heapAfter);           \
-        }                                                                                                                        \
-    } while (0)
-
-#else
-#define LOG_HEAP(...)
-#define DEBUG_HEAP_BEFORE
-#define DEBUG_HEAP_AFTER(context, ptr)
-#endif
-
 /// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
 extern "C" void logLegacy(const char *level, const char *fmt, ...);
 

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                         bool usePreset)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";
@@ -38,46 +31,4 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
         return useShortName ? "Custom" : "Invalid";
         break;
     }
-}
-
-const char *DisplayFormatters::getDeviceRole(meshtastic_Config_DeviceConfig_Role role)
-{
-    switch (role) {
-    case meshtastic_Config_DeviceConfig_Role_CLIENT:
-        return "Client";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE:
-        return "Client Mute";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN:
-        return "Client Hidden";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_BASE:
-        return "Client Base";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND:
-        return "Lost and Found";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TRACKER:
-        return "Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_SENSOR:
-        return "Sensor";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK:
-        return "TAK";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK_TRACKER:
-        return "TAK Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER:
-        return "Router";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER_LATE:
-        return "Router Late";
-        break;
-    default:
-        return "Unknown";
-        break;
-    }
 }

src/DisplayFormatters.h

@@ -4,7 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                 bool usePreset);
-    static const char *getDeviceRole(meshtastic_Config_DeviceConfig_Role role);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
 };

src/GPSStatus.h

@@ -22,9 +22,6 @@ class GPSStatus : public Status
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
-    /// Time of last valid GPS fix (millis since boot)
-    uint32_t lastFixMillis = 0;
-
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
@@ -86,9 +83,6 @@ class GPSStatus : public Status
 
     uint32_t getNumSatellites() const { return p.sats_in_view; }
 
-    /// Return millis() when the last GPS fix occurred (0 = never)
-    uint32_t getLastFixMillis() const { return lastFixMillis; }
-
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_DEBUG
@@ -120,9 +114,6 @@ class GPSStatus : public Status
 
         if (isDirty) {
             if (hasLock) {
-                // Record time of last valid GPS fix
-                lastFixMillis = millis();
-
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,

src/Power.cpp

@@ -20,11 +20,6 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
-#if defined(ARCH_PORTDUINO)
-#include "api/WiFiServerAPI.h"
-#include "input/LinuxInputImpl.h"
-#endif
-
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -125,16 +120,6 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
-#ifdef HAS_PPM
-// note: XPOWERS_CHIP_XXX must be defined in variant.h
-#include <XPowersLib.h>
-XPowersPPM *PPM = NULL;
-#endif
-
-#ifdef HAS_BQ27220
-#include "bq27220.h"
-#endif
-
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -680,10 +665,6 @@ bool Power::setup()
         found = true;
     } else if (lipoInit()) {
         found = true;
-    } else if (lipoChargerInit()) {
-        found = true;
-    } else if (meshSolarInit()) {
-        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -698,65 +679,9 @@ bool Power::setup()
     return found;
 }
 
-void Power::powerCommandsCheck()
-{
-    if (rebootAtMsec && millis() > rebootAtMsec) {
-        LOG_INFO("Rebooting");
-        reboot();
-    }
-
-    if (shutdownAtMsec && millis() > shutdownAtMsec) {
-        shutdownAtMsec = 0;
-        shutdown();
-    }
-}
-
-void Power::reboot()
-{
-    notifyReboot.notifyObservers(NULL);
-#if defined(ARCH_ESP32)
-    ESP.restart();
-#elif defined(ARCH_NRF52)
-    NVIC_SystemReset();
-#elif defined(ARCH_RP2040)
-    rp2040.reboot();
-#elif defined(ARCH_PORTDUINO)
-    deInitApiServer();
-    if (aLinuxInputImpl)
-        aLinuxInputImpl->deInit();
-    SPI.end();
-    Wire.end();
-    Serial1.end();
-    if (screen) {
-        delete screen;
-        screen = nullptr;
-    }
-    LOG_DEBUG("final reboot!");
-    ::reboot();
-#elif defined(ARCH_STM32WL)
-    HAL_NVIC_SystemReset();
-#else
-    rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
-#endif
-}
-
 void Power::shutdown()
 {
-
-#if HAS_SCREEN
-    if (screen) {
-#ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#else
-        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-#endif
-    }
-#endif
-#if !defined(ARCH_STM32WL)
-    playShutdownMelody();
-#endif
-    nodeDB->saveToDisk();
+    LOG_INFO("Shutting Down");
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -768,11 +693,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, true, true);
-#elif defined(ARCH_PORTDUINO)
-    exit(EXIT_SUCCESS);
-#else
-    LOG_WARN("FIXME implement shutdown for this platform");
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 
@@ -833,27 +754,18 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_HEAP(threadlist);
-        LOG_HEAP("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
-                 memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
 #ifdef DEBUG_HEAP_MQTT
@@ -865,19 +777,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
-        char heapTopic[128];
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char heapString[16];
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char wifiString[16];
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
     }
 #endif
 
@@ -1329,213 +1237,3 @@ bool Power::lipoInit()
     return false;
 }
 #endif
-
-#if defined(HAS_PPM) && HAS_PPM
-
-/**
- * Adapter class for BQ25896/BQ27220 Lipo battery charger.
- */
-class LipoCharger : public HasBatteryLevel
-{
-  private:
-    BQ27220 *bq = nullptr;
-
-  public:
-    /**
-     * Init the I2C BQ25896 Lipo battery charger
-     */
-    bool runOnce()
-    {
-        if (PPM == nullptr) {
-            PPM = new XPowersPPM;
-            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
-            if (result) {
-                LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // PPM->setSysPowerDownVoltage(3100);
-
-                // Set input current limit, default is 500mA
-                // PPM->setInputCurrentLimit(800);
-
-                // Disable current limit pin
-                // PPM->disableCurrentLimitPin();
-
-                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                PPM->setChargeTargetVoltage(4288);
-
-                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // PPM->setPrechargeCurr(64);
-
-                // The premise is that limit pin is disabled, or it will
-                // only follow the maximum charging current set by limit pin.
-                // Set the charging current , Range:0~5056mA ,step:64mA
-                PPM->setChargerConstantCurr(1024);
-
-                // To obtain voltage data, the ADC must be enabled first
-                PPM->enableMeasure();
-
-                // Turn on charging function
-                // If there is no battery connected, do not turn on the charging function
-                PPM->enableCharge();
-            } else {
-                LOG_WARN("PPM BQ25896 init failed");
-                delete PPM;
-                PPM = nullptr;
-                return false;
-            }
-        }
-        if (bq == nullptr) {
-            bq = new BQ27220;
-            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
-
-            bool result = bq->init();
-            if (result) {
-                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
-                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
-                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
-                return true;
-            } else {
-                LOG_WARN("BQ27220 init failed");
-                delete bq;
-                bq = nullptr;
-                return false;
-            }
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override
-    {
-        return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
-    }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override
-    {
-        bool isCharging = PPM->isCharging();
-        if (isCharging) {
-            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
-        } else {
-            if (!PPM->isVbusIn()) {
-                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
-            }
-        }
-        return isCharging;
-    }
-};
-
-LipoCharger lipoCharger;
-
-/**
- * Init the Lipo battery charger
- */
-bool Power::lipoChargerInit()
-{
-    bool result = lipoCharger.runOnce();
-    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoCharger;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoChargerInit()
-{
-    return false;
-}
-#endif
-
-#ifdef HELTEC_MESH_SOLAR
-#include "meshSolarApp.h"
-
-/**
- * meshSolar class for an SMBUS battery sensor.
- */
-class meshSolarBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        meshSolarStart();
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return meshSolarIsCharging(); }
-};
-
-meshSolarBatteryLevel meshSolarLevel;
-
-/**
- * Init the meshSolar battery level sensor
- */
-bool Power::meshSolarInit()
-{
-    bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &meshSolarLevel;
-    return true;
-}
-
-#else
-/**
- * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::meshSolarInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    shutdownAtMsec = millis();
+    power->shutdown();
 }
 
 #include "error.h"

src/RedirectablePrint.cpp

@@ -4,7 +4,6 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "main.h"
-#include "memGet.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
 #include <assert.h>
 #include <cstring>
@@ -58,7 +57,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
 #endif
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -100,7 +99,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
     size_t r = 0;
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -167,16 +166,6 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         print(thread->ThreadName);
         print("] ");
     }
-
-#ifdef DEBUG_HEAP
-    // Add heap free space bytes prefix before every log message
-#ifdef ARCH_PORTDUINO
-    ::printf("[heap %u] ", memGet.getFreeHeap());
-#else
-    printf("[heap %u] ", memGet.getFreeHeap());
-#endif
-#endif // DEBUG_HEAP
-
     r += vprintf(logLevel, format, arg);
 }
 
@@ -299,7 +288,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
-        if (portduino_config.traceFilename != "") {
+        if (settingsStrings[traceFilename] != "") {
             va_list arg;
             va_start(arg, format);
             try {
@@ -308,18 +297,18 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
             delete[] newFormat;
             return;
         }
     }
-    if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
         delete[] newFormat;
         return;
     }

src/SerialConsole.cpp

@@ -6,14 +6,6 @@
 #include "configuration.h"
 #include "time.h"
 
-#if defined(ARDUINO_USB_CDC_ON_BOOT) && ARDUINO_USB_CDC_ON_BOOT
-#define IS_USB_SERIAL
-#ifdef SERIAL_HAS_ON_RECEIVE
-#undef SERIAL_HAS_ON_RECEIVE
-#endif
-#include "HWCDC.h"
-#endif
-
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
 #else
@@ -30,12 +22,7 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
-
-#if defined(SERIAL_HAS_ON_RECEIVE)
-    // onReceive does only exist for HardwareSerial not for USB CDC serial
-    Port.onReceive([sc]() { sc->rxInt(); });
-#endif
+    new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
     DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
@@ -77,22 +64,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-#ifdef HELTEC_MESH_SOLAR
-    // After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port &&
-        moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) {
-        return 250;
-    }
-#endif
-
-    int32_t delay = runOncePart();
-#if defined(SERIAL_HAS_ON_RECEIVE)
-    return Port.available() ? delay : INT32_MAX;
-#elif defined(IS_USB_SERIAL)
-    return HWCDC::isPlugged() ? delay : (1000 * 20);
-#else
-    return delay;
-#endif
+    return runOncePart();
 }
 
 void SerialConsole::flush()
@@ -100,18 +72,6 @@ void SerialConsole::flush()
     Port.flush();
 }
 
-// trigger tx of serial data
-void SerialConsole::onNowHasData(uint32_t fromRadioNum)
-{
-    setIntervalFromNow(0);
-}
-
-// trigger rx of serial data
-void SerialConsole::rxInt()
-{
-    setIntervalFromNow(0);
-}
-
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {

src/SerialConsole.h

@@ -32,14 +32,11 @@ class SerialConsole : public StreamAPI, public RedirectablePrint, private concur
     virtual int32_t runOnce() override;
 
     void flush();
-    void rxInt();
 
   protected:
     /// Check the current underlying physical link to see if the client is currently connected
     virtual bool checkIsConnected() override;
 
-    virtual void onNowHasData(uint32_t fromRadioNum) override;
-
     /// Possibly switch to protobufs if we see a valid protobuf message
     virtual void log_to_serial(const char *logLevel, const char *format, va_list arg);
 };

src/buzz/BuzzerFeedbackThread.cpp

@@ -5,7 +5,7 @@
 
 BuzzerFeedbackThread *buzzerFeedbackThread;
 
-BuzzerFeedbackThread::BuzzerFeedbackThread()
+BuzzerFeedbackThread::BuzzerFeedbackThread() : OSThread("BuzzerFeedback")
 {
     if (inputBroker)
         inputObserver.observe(inputBroker);
@@ -19,19 +19,20 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         return 0; // Let other handlers process the event
     }
 
+    // Track last event time for potential future use
+    lastEventTime = millis();
+    needsUpdate = true;
+
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
     case INPUT_BROKER_SELECT:
-    case INPUT_BROKER_SELECT_LONG:
         playBeep(); // Confirmation feedback
         break;
 
     case INPUT_BROKER_UP:
-    case INPUT_BROKER_UP_LONG:
     case INPUT_BROKER_DOWN:
-    case INPUT_BROKER_DOWN_LONG:
     case INPUT_BROKER_LEFT:
     case INPUT_BROKER_RIGHT:
         playChirp(); // Navigation feedback
@@ -46,6 +47,10 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         playComboTune(); // Ping sent feedback
         break;
 
+    case INPUT_BROKER_SHUTDOWN:
+        playShutdownMelody(); // Shutdown feedback
+        break;
+
     default:
         // For other events, check if it's a printable character
         if (event->kbchar >= 32 && event->kbchar <= 126) {
@@ -57,4 +62,18 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     }
 
     return 0; // Allow other handlers to process the event
-}
+}
+
+int32_t BuzzerFeedbackThread::runOnce()
+{
+    // This thread is primarily event-driven, but we can use runOnce
+    // for any periodic tasks if needed in the future
+
+    if (needsUpdate) {
+        needsUpdate = false;
+        // Could add any periodic processing here
+    }
+
+    // Run every 100ms when active, less frequently when idle
+    return needsUpdate ? 100 : 1000;
+}

src/buzz/BuzzerFeedbackThread.h

@@ -4,7 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "input/InputBroker.h"
 
-class BuzzerFeedbackThread
+class BuzzerFeedbackThread : public concurrency::OSThread
 {
     CallbackObserver<BuzzerFeedbackThread, const InputEvent *> inputObserver =
         CallbackObserver<BuzzerFeedbackThread, const InputEvent *>(this, &BuzzerFeedbackThread::handleInputEvent);
@@ -12,6 +12,13 @@ class BuzzerFeedbackThread
   public:
     BuzzerFeedbackThread();
     int handleInputEvent(const InputEvent *event);
+
+  protected:
+    virtual int32_t runOnce() override;
+
+  private:
+    uint32_t lastEventTime = 0;
+    bool needsUpdate = false;
 };
 
 extern BuzzerFeedbackThread *buzzerFeedbackThread;

src/buzz/buzz.cpp

@@ -140,10 +140,6 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
-
-    if (leadUpNoteIndex >= leadUpNotesCount) {
-        return false; // this was the final note
-    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/concurrency/OSThread.cpp

@@ -86,13 +86,11 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_HEAP("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
-#endif
-#ifdef DEBUG_LOOP_TIMING
-    LOG_DEBUG("====== Thread next run in: %d", newDelay);
+        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
+
     runned();
 
     if (newDelay >= 0)

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 
@@ -117,12 +117,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
-#ifdef HELTEC_V4
-// Power Amps are often non-linear, so we can use an array of values for the power curve
-#define NUM_PA_POINTS 22
-#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
-#endif
-
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -141,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(SEEED_WIO_TRACKER_L1)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else
@@ -156,12 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
-#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -200,11 +193,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
 #define PCT2075_ADDR 0x37
-#define BQ27220_ADDR 0x55 // same address as TDECK_KB
-#define BQ25896_ADDR 0x6B
-#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -218,7 +208,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
-#define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 
 // -----------------------------------------------------------------------------
@@ -241,7 +230,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -268,13 +256,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VEXT_ON_VALUE LOW
 #endif
 
-// -----------------------------------------------------------------------------
-// Rotary encoder
-// -----------------------------------------------------------------------------
-#ifndef ROTARY_DELAY
-#define ROTARY_DELAY 5
-#endif
-
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.cpp

@@ -25,8 +25,8 @@ ScanI2C::FoundDevice ScanI2C::firstScreen() const
 
 ScanI2C::FoundDevice ScanI2C::firstRTC() const
 {
-    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_RX8130CE};
-    return firstOfOrNONE(3, types);
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
+    return firstOfOrNONE(2, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

src/detect/ScanI2C.h

@@ -14,7 +14,6 @@ class ScanI2C
         SCREEN_ST7567,
         RTC_RV3028,
         RTC_PCF8563,
-        RTC_RX8130CE,
         CARDKB,
         TDECKKB,
         BBQ10KB,
@@ -75,14 +74,7 @@ class ScanI2C
         RAK12035,
         TCA8418KB,
         PCT2075,
-        CST328,
-        BQ25896,
-        BQ27220,
-        LTR553ALS,
-        BHI260AP,
         BMM150,
-        TSL2561,
-        DRV2605
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -184,22 +184,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                // Update RTC EEPROM settings, if necessary
-                if (rtc.readEEPROMRegister(0x35) != 0x07) {
-                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
-                }
-                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
-                    rtc.writeEEPROMRegister(0x37, 0xB4);
-                }
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
                 break;
 #endif
 
 #ifdef PCF8563_RTC
                 SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address)
 #endif
-#ifdef RX8130CE_RTC
-                SCAN_SIMPLE_CASE(RX8130CE_RTC, RTC_RX8130CE, "RX8130CE", (uint8_t)addr.address)
-#endif
 
             case CARDKB_ADDR:
                 // Do we have the RAK14006 instead?
@@ -214,17 +206,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-            case TDECK_KB_ADDR:
-                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
-                if (registerValue != 0) {
-                    logFoundDevice("BQ27220", (uint8_t)addr.address);
-                    type = BQ27220;
-                } else {
-                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
-                    type = TDECKKB;
-                }
-                break;
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -297,7 +279,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = AHT10;
                 break;
 #endif
-#if !defined(M5STACK_UNITC6L)
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -344,7 +325,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
-#endif
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
@@ -416,12 +396,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
-                if ((registerValue & 0b00000011) == 0b00000010) {
-                    type = BQ25896;
-                    logFoundDevice("BQ25896", (uint8_t)addr.address);
-                    break;
-                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -466,26 +440,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
@@ -498,14 +459,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
-                    if (registerValue == 0xe0) {
-                        type = DRV2605;
-                        logFoundDevice("DRV2605", (uint8_t)addr.address);
-                    } else {
-                        type = MPR121KB;
-                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                    }
+                    type = MPR121KB;
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
                 }
                 break;
 

src/gps/GPS.cpp

@@ -1,4 +1,5 @@
 #include <cstring> // Include for strstr
+#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -38,9 +39,11 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
+#if defined(SENSECAP_INDICATOR)
+FakeUART *GPS::_serial_gps = FakeSerial;
+#elif defined(RAK2560)
+HardwareSerial *GPS::_serial_gps = &Serial2;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif
@@ -516,7 +519,6 @@ bool GPS::setup()
                 }
             }
             // Rare Serial Speeds
-#ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
                 LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
@@ -527,7 +529,6 @@ bool GPS::setup()
                     }
                 }
             }
-#endif
         }
 
         if (gnssModel != GNSS_MODEL_UNKNOWN) {
@@ -644,16 +645,8 @@ bool GPS::setup()
             delay(250);
         } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352)) {
 
-            if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_IN ||
-                config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_NP_865) {
-                _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    0       1      0   0    1
-            } else {
-                _serial_gps->write("$PAIR066,1,1,1,1,0,0*3A\r\n"); // Enable GPS+GLONASS+GALILEO+BDS
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    1       1      1   0    0
-            }
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
+
             // Configure NMEA (sentences will output once per fix)
             _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
             _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
@@ -809,14 +802,6 @@ bool GPS::setup()
             } else {
                 LOG_INFO("GNSS module configuration saved!");
             }
-        } else if (gnssModel == GNSS_MODEL_CM121) {
-            // only ask for RMC and GGA
-            // enable GGA
-            _serial_gps->write("$CFGMSG,0,0,1,1*1B\r\n");
-            delay(250);
-            // enable RMC
-            _serial_gps->write("$CFGMSG,0,4,1,1*1F\r\n");
-            delay(250);
         }
         didSerialInit = true;
     }
@@ -852,6 +837,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+#ifdef GNSS_AIROHA
+        lastFixStartMsec = 0;
+#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -869,7 +857,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
 
@@ -881,7 +871,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
     }
@@ -1064,8 +1056,6 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
-        // Reset the fix quality to 0, since we're off.
-        fixQual = 0;
     }
 }
 
@@ -1088,6 +1078,7 @@ void GPS::publishUpdate()
 
 int32_t GPS::runOnce()
 {
+#if !defined(SENSECAP_INDICATOR)
     if (!GPSInitFinished) {
         if (!_serial_gps || config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
             LOG_INFO("GPS set to not-present. Skip probe");
@@ -1103,6 +1094,12 @@ int32_t GPS::runOnce()
         GPSInitFinished = true;
         publishUpdate();
     }
+#endif
+
+    // Repeaters have no need for GPS
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER) {
+        return disable();
+    }
 
     if (whileActive()) {
         // if we have received valid NMEA claim we are connected
@@ -1120,19 +1117,11 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
-    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1141,7 +1130,8 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
+
+        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1149,15 +1139,9 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
-#ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
-#endif
-        }
+
+        down();
+        shouldPublish = true; // publish our update for this just finished acquisition window
     }
 
     // If state has changed do a publish
@@ -1210,7 +1194,7 @@ static const char *DETECTED_MESSAGE = "%s detected";
         LOG_DEBUG(PROBE_MESSAGE, COMMAND, FAMILY_NAME);                                                                          \
         clearBuffer();                                                                                                           \
         _serial_gps->write(COMMAND "\r\n");                                                                                      \
-        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP, serialSpeed);                                       \
+        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP);                                                    \
         if (detectedDriver != GNSS_MODEL_UNKNOWN) {                                                                              \
             return detectedDriver;                                                                                               \
         }                                                                                                                        \
@@ -1244,15 +1228,9 @@ GnssModel_t GPS::probe(int serialSpeed)
     _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
     _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
     delay(20);
-    // Close NMEA sequences on CM121
-    _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
-    _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
-    _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
-    delay(20);
 
-    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
-    std::vector<ChipInfo> unicore = {
-        {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
+    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
+    std::vector<ChipInfo> unicore = {{"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}};
     PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
 
     std::vector<ChipInfo> atgm = {
@@ -1378,55 +1356,36 @@ GnssModel_t GPS::probe(int serialSpeed)
     return GNSS_MODEL_UNKNOWN;
 }
 
-GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed)
+GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    // Calculate buffer size based on baud rate - 256 bytes for 9600 baud as baseline
-    // Higher baud rates get proportionally larger buffers to handle more data
-    int bufferSize = (serialSpeed * 256) / 9600;
-    // Clamp buffer size between reasonable limits
-    if (bufferSize < 128)
-        bufferSize = 128;
-    if (bufferSize > 2048)
-        bufferSize = 2048;
-
-    char *response = new char[bufferSize](); // Dynamically allocate based on baud rate
-    uint16_t responseLen = 0;
+    String response = "";
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            char c = _serial_gps->read();
+            response += (char)_serial_gps->read();
 
-            // Add char to buffer if there's space
-            if (responseLen < bufferSize - 1) {
-                response[responseLen++] = c;
-                response[responseLen] = '\0';
-            }
-
-            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+            if (response.endsWith(",") || response.endsWith("\r\n")) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response);
+                LOG_DEBUG(response.c_str());
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
-                        delete[] response; // Cleanup before return
                         return chipInfo.driver;
                     }
                 }
             }
-            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-                // Reset the response buffer for the next potential message
-                responseLen = 0;
-                response[0] = '\0';
+            if (response.endsWith("\r\n")) {
+                response.trim();
+                response = ""; // Reset the response string for the next potential message
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response);
+    LOG_DEBUG(response.c_str());
 #endif
-    delete[] response;         // Cleanup before return
-    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
+    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
 }
 
 GPS *GPS::createGps()
@@ -1451,11 +1410,13 @@ GPS *GPS::createGps()
         _en_gpio = PIN_GPS_EN;
 #endif
 #ifdef ARCH_PORTDUINO
-    if (!portduino_config.has_gps)
+    if (!settingsMap[has_gps])
         return nullptr;
 #endif
+#if !defined(SENSECAP_INDICATOR)
     if (!_rx_gpio || !_serial_gps) // Configured to have no GPS at all
         return nullptr;
+#endif
 
     GPS *new_gps = new GPS;
     new_gps->rx_gpio = _rx_gpio;
@@ -1541,10 +1502,28 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've set a new time
+ * @return true if we've acquired a new location
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    if (fix > 0) {
+        if (lastFixStartMsec > 0) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = millis();
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1561,13 +1540,10 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
-                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
-                          t.tm_min, t.tm_sec, ti.age());
-                return true;
-            } else {
-                return false;
-            }
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
+                      t.tm_sec, ti.age());
+            perhapsSetRTC(RTCQualityGPS, t);
+            return true;
         } else
             return false;
     } else
@@ -1582,6 +1558,25 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        if (fix > 0) {
+            if (lastFixStartMsec > 0) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = millis();
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -11,6 +11,10 @@
 #include "input/UpDownInterruptImpl1.h"
 #include "modules/PositionModule.h"
 
+#ifdef SENSECAP_INDICATOR
+#include "mesh/comms/FakeUART.h"
+#endif
+
 // Allow defining the polarity of the ENABLE output.  default is active high
 #ifndef GPS_EN_ACTIVE
 #define GPS_EN_ACTIVE 1
@@ -31,8 +35,7 @@ typedef enum {
     GNSS_MODEL_MTK_PA1616S,
     GNSS_MODEL_AG3335,
     GNSS_MODEL_AG3352,
-    GNSS_MODEL_LS20031,
-    GNSS_MODEL_CM121
+    GNSS_MODEL_LS20031
 } GnssModel_t;
 
 typedef enum {
@@ -160,7 +163,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t fixHoldEnds = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 
@@ -189,7 +192,9 @@ class GPS : private concurrency::OSThread
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
 
     /** If !NULL we will use this serial port to construct our GPS */
-#if defined(ARCH_RP2040)
+#if defined(SENSECAP_INDICATOR)
+    static FakeUART *_serial_gps;
+#elif defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
@@ -237,7 +242,7 @@ class GPS : private concurrency::OSThread
 
     virtual int32_t runOnce() override;
 
-    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed);
+    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap);
 
     // Get GNSS model
     GnssModel_t probe(int serialSpeed);

src/gps/RTC.cpp

@@ -9,9 +9,6 @@
 static RTCQuality currentQuality = RTCQualityNone;
 uint32_t lastSetFromPhoneNtpOrGps = 0;
 
-static uint32_t lastTimeValidationWarning = 0;
-static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
-
 RTCQuality getRTCQuality()
 {
     return currentQuality;
@@ -26,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-RTCSetResult readFromRTC()
+void readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -47,25 +44,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -88,55 +75,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-                lastTimeValidationWarning = millis();
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
-    }
-#elif defined(RX8130CE_RTC)
-    if (rtc_found.address == RX8130CE_RTC) {
-        uint32_t now = millis();
-        ArtronShop_RX8130CE rtc(&Wire);
-        tm t;
-        if (rtc.getTime(&t)) {
-            tv.tv_sec = gm_mktime(&t);
-            tv.tv_usec = 0;
-
-            uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-            LOG_DEBUG("Read RTC time from RX8130CE getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900,
-                      t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-#ifdef BUILD_EPOCH
-            if (tv.tv_sec < BUILD_EPOCH) {
-                if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                    LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-                    lastTimeValidationWarning = millis();
-                }
-                return RTCSetResultInvalidTime;
-            }
-#endif
-            if (currentQuality == RTCQualityNone) {
-                timeStartMsec = now;
-                zeroOffsetSecs = tv.tv_sec;
-                currentQuality = RTCQualityDevice;
-            }
-            return RTCSetResultSuccess;
-        }
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -145,10 +92,8 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
-        return RTCSetResultSuccess;
     }
 #endif
-    return RTCSetResultNotSet;
 }
 
 /**
@@ -156,32 +101,19 @@ RTCSetResult readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return RTCSetResult
+ * @return True if the RTC was set, false otherwise.
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
-RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
     uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv->tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+        return false;
     }
 #endif
 
@@ -243,17 +175,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
-#elif defined(RX8130CE_RTC)
-        if (rtc_found.address == RX8130CE_RTC) {
-            ArtronShop_RX8130CE rtc(&Wire);
-            tm *t = gmtime(&tv->tv_sec);
-            if (rtc.setTime(*t)) {
-                LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
-                          t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
-            } else {
-                LOG_WARN("Failed to set time for RX8130CE");
-            }
-        }
 #elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
 #endif
@@ -263,9 +184,9 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         readFromRTC();
 #endif
 
-        return RTCSetResultSuccess;
+        return true;
     } else {
-        return RTCSetResultNotSet; // RTC was already set with a higher quality time
+        return false;
     }
 }
 
@@ -294,7 +215,7 @@ const char *RtcName(RTCQuality quality)
  * @param t The time to potentially set the RTC to.
  * @return True if the RTC was set to the provided time, false otherwise.
  */
-RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
+bool perhapsSetRTC(RTCQuality q, struct tm &t)
 {
     /* Convert to unix time
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
@@ -305,32 +226,12 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
-    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-#ifdef BUILD_EPOCH
-    if (tv.tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv.tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    }
-#endif
+    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {
         // LOG_DEBUG("Ignore invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
-        return RTCSetResultInvalidTime;
+        return false;
     } else {
         return perhapsSetRTC(q, &tv);
     }
@@ -382,40 +283,14 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
 time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
-    time_t result = 0;
-
-    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
-    int year = 1900 + tm->tm_year; // tm_year is years since 1900
-    int year_minus_one = year - 1;
-    int days_before_this_year = 0;
-    days_before_this_year += year_minus_one * 365;
-    // leap days: every 4 years, except 100s, but including 400s.
-    days_before_this_year += year_minus_one / 4 - year_minus_one / 100 + year_minus_one / 400;
-    // subtract from 1970-01-01 to get days since epoch
-    days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
-
-    // Now, within this tm->year, compute the days *before* this tm->month starts.
-    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
-
-    // If this is a leap year, and we're past February, add a day:
-    if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
-        days_this_year_before_this_month += 1;
+    setenv("TZ", "GMT0", 1);
+    time_t res = mktime(tm);
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "UTC0", 1);
     }
-
-    // And within this month:
-    int days_this_month_before_today = tm->tm_mday - 1; // tm->tm_mday is 1..31
-
-    // Now combine them all together, and convert days to seconds:
-    result += (days_before_this_year + days_this_year_before_this_month + days_this_month_before_today);
-    result *= 86400L;
-
-    // Finally, add in the hours, minutes, and seconds of today:
-    result += tm->tm_hour * 3600;
-    result += tm->tm_min * 60;
-    result += tm->tm_sec;
-
-    return result;
+    return res;
 #else
     return mktime(tm);
 #endif

src/gps/RTC.h

@@ -4,10 +4,6 @@
 #include "sys/time.h"
 #include <Arduino.h>
 
-#ifdef RX8130CE_RTC
-#include <ArtronShop_RX8130CE.h>
-#endif
-
 enum RTCQuality {
 
     /// We haven't had our RTC set yet
@@ -26,22 +22,13 @@ enum RTCQuality {
     RTCQualityGPS = 4
 };
 
-/// The RTC set result codes
-/// Used to indicate the result of an attempt to set the RTC.
-enum RTCSetResult {
-    RTCSetResultNotSet = 0,      ///< RTC was set successfully
-    RTCSetResultSuccess = 1,     ///< RTC was set successfully
-    RTCSetResultInvalidTime = 3, ///< The provided time was invalid (e.g., before the build epoch)
-    RTCSetResultError = 4        ///< An error occurred while setting the RTC
-};
-
 RTCQuality getRTCQuality();
 
 extern uint32_t lastSetFromPhoneNtpOrGps;
 
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
-RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t);
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
+bool perhapsSetRTC(RTCQuality q, struct tm &t);
 
 /// Return a string name for the quality
 const char *RtcName(RTCQuality quality);
@@ -52,13 +39,10 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-RTCSetResult readFromRTC();
+void readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
-#ifdef BUILD_EPOCH
-static constexpr uint64_t FORTY_YEARS = (40ULL * 365 * SEC_PER_DAY); // Use 64-bit arithmetic to prevent overflow
-#endif

src/graphics/EInkDisplay2.cpp

@@ -6,10 +6,6 @@
 #include "main.h"
 #include <SPI.h>
 
-#ifdef GXEPD2_DRIVER_0
-#include "einkDetect.h"
-#endif
-
 /*
     The macros EINK_DISPLAY_MODEL, EINK_WIDTH, and EINK_HEIGHT are defined as build_flags in a variant's platformio.ini
     Previously, these macros were defined at the top of this file.
@@ -67,28 +63,20 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
-    // HACK for L1 EInk
-#if defined(SEEED_WIO_TRACKER_L1_EINK)
-    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
-    for (uint32_t y = 0; y < displayHeight; y++) {
-        for (uint32_t x = 0; x < displayWidth; x++) {
-            auto b = buffer[x + (y / 8) * displayWidth];
-            auto isset = b & (1 << (y & 7));
-            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
-        }
-    }
-#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
+            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
-#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -148,32 +136,17 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#ifdef ELECROW_ThinkNode_M1
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
 #endif
-        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
-    }
-#elif defined(ELECROW_ThinkNode_M5)
-    {
-        // Start HSPI
-        hspi = new SPIClass(HSPI);
-        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-        adafruitDisplay->init();
-
-        adafruitDisplay->setRotation(4);
-
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -201,8 +174,9 @@ bool EInkDisplay::connect()
         }
     }
 
-#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
-    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);
@@ -229,7 +203,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(M5_COREINK) || defined(T_DECK_PRO)
+#elif defined(M5_COREINK)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
@@ -243,7 +217,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
+#elif defined(HELTEC_MESH_POCKET)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -257,25 +231,7 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
-
-    // Detect display model, before starting SPI
-    EInkDetectionResult displayModel = detectEInk();
-
-    // Start HSPI
-    hspi = new SPIClass(HSPI);
-    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-    // Create GxEPD2 object
-    adafruitDisplay = new GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1>((uint8_t)displayModel, PIN_EINK_CS, PIN_EINK_DC,
-                                                                         PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-    // Init GxEPD2
-    adafruitDisplay->init();
-    adafruitDisplay->setRotation(3);
-
 #endif
 
     return true;

src/graphics/EInkDisplay2.h

@@ -5,10 +5,6 @@
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
 
-#ifdef GXEPD2_DRIVER_0 // If variant has multiple possible display models
-#include "GxEPD2Multi.h"
-#endif
-
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -67,24 +63,17 @@ class EInkDisplay : public OLEDDisplay
     // Connect to the display
     virtual bool connect() override;
 
-#ifdef GXEPD2_DRIVER_0
-    // AdafruitGFX display object - wrapper for multiple drivers
-    // Allows runtime detection of multiple displays
-    // Avoid this situation if possible!
-    GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1> *adafruitDisplay = NULL;
-#else
-    // AdafruitGFX display object (for single display model) - instantiated in connect(), variant specific
+    // AdafruitGFX display object - instantiated in connect(), variant specific
     GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT> *adafruitDisplay = NULL;
-#endif
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
     defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
+#if defined(HELTEC_MESH_POCKET)
     SPIClass *spi1 = NULL;
 #endif