Merge branch 'master' into develop

* Force coverage tests to run in simulation mode

* Revert "Force coverage tests to run in simulation mode"

This reverts commit e4ec719e6f.

* Force coverage tests to run in simulation mode

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/workflows/build_firmware.yml

@@ -19,6 +19,8 @@ jobs:
   pio-build:
     name: build-${{ inputs.platform }}
     runs-on: ubuntu-24.04
+    outputs:
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
       - uses: actions/checkout@v5
         with:
@@ -55,6 +57,7 @@ jobs:
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
+        id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true

.github/workflows/build_one_arch.yml

@@ -3,6 +3,7 @@ name: Build One Arch
 on:
   workflow_dispatch:
     inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
       arch:
         type: choice
         options:
@@ -16,10 +17,13 @@ on:
           - stm32
           - native
 
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
 jobs:
   setup:
-    strategy:
-      fail-fast: false
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v5
@@ -31,23 +35,11 @@ jobs:
       - name: Generate matrix
         id: jsonStep
         run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} extra)
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{inputs.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
 
   version:
     runs-on: ubuntu-latest
@@ -64,101 +56,18 @@ jobs:
       long: ${{ steps.version.outputs.long }}
       deb: ${{ steps.version.outputs.deb }}
 
-  build-esp32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32'}}
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [setup, version]
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32s3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c6'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'nrf52840'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2040'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2350'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'stm32' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
 
   build-debian-src:
     if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
@@ -252,18 +161,7 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
         uses: actions/checkout@v5
@@ -332,169 +230,3 @@ jobs:
           name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
           description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_one_target.yml

@@ -3,6 +3,7 @@ name: Build One Target
 on:
   workflow_dispatch:
     inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
       arch:
         type: choice
         options:
@@ -19,11 +20,13 @@ on:
         type: string
         required: false
         description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-
       # find-target:
       #   type: boolean
       #   default: true
       #   description: 'Find the available targets'
+
+permissions: read-all
+
 jobs:
   find-targets:
     if: ${{ inputs.target == '' }}
@@ -51,13 +54,13 @@ jobs:
       - name: Generate matrix
         id: jsonStep
         run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} extra)
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
           echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
           echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | sed 's/[][]//g; s/", "/\n- /g; s/"//g; s/^/- /' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
@@ -75,11 +78,9 @@ jobs:
       long: ${{ steps.version.outputs.long }}
       deb: ${{ steps.version.outputs.deb }}
 
-  build-arch:
+  build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
     needs: [version]
-    strategy:
-      fail-fast: false
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
@@ -165,10 +166,8 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
     runs-on: ubuntu-latest
-    needs: [version, build-arch]
+    needs: [version, build]
     steps:
       - name: Checkout code
         uses: actions/checkout@v5
@@ -237,159 +236,3 @@ jobs:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: debug-elfs-*-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' && inputs.target != '' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/main_matrix.yml

@@ -29,17 +29,10 @@ jobs:
   setup:
     if: github.repository == 'meshtastic/firmware'
     strategy:
-      fail-fast: false
+      fail-fast: true
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
           - check
     runs-on: ubuntu-24.04
     steps:
@@ -59,19 +52,13 @@ jobs:
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+          echo "$TARGETS" >> $GITHUB_STEP_SUMMARY
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
+      all: ${{ steps.jsonStep.outputs.all }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
@@ -94,7 +81,8 @@ jobs:
     needs: setup
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
@@ -103,96 +91,20 @@ jobs:
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
-  build-esp32:
+  build:
     needs: [setup, version]
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -203,7 +115,7 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
@@ -288,18 +200,7 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
         uses: actions/checkout@v5

.github/workflows/merge_queue.yml

@@ -7,23 +7,13 @@ on:
   # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
   merge_group:
 
-env:
-  FAIL_FAST_PER_ARCH: true
-
 jobs:
   setup:
     strategy:
       fail-fast: true
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
           - check
     runs-on: ubuntu-24.04
     steps:
@@ -39,19 +29,12 @@ jobs:
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
+      all: ${{ steps.jsonStep.outputs.all }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
@@ -73,7 +56,8 @@ jobs:
     needs: setup
     strategy:
       fail-fast: true
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
@@ -82,96 +66,19 @@ jobs:
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
-  build-esp32:
+  build:
     needs: [setup, version]
     strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -260,18 +167,7 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
         uses: actions/checkout@v5

.github/workflows/test_native.yml

@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/program &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."

.trunk/trunk.yaml

@@ -16,7 +16,7 @@ lint:
     - bandit@1.8.6
     - trivy@0.67.0
     - taplo@0.10.0
-    - ruff@0.13.2
+    - ruff@0.13.3
     - isort@6.1.0
     - markdownlint@0.45.0
     - oxipng@9.1.5

bin/generate_ci_matrix.py

@@ -1,28 +1,32 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 
 """Generate the CI matrix."""
 
+import argparse
 import json
-import sys
-import random
 import re
 from platformio.project.config import ProjectConfig
 
-options = sys.argv[1:]
+parser = argparse.ArgumentParser(description="Generate the CI matrix")
+parser.add_argument("platform", help="Platform to build for")
+parser.add_argument(
+  "--level",
+  choices=["extra", "pr"],
+  nargs="*",
+  default=[],
+  help="Board level to build for (omit for full release boards)",
+)
+args = parser.parse_args()
 
 outlist = []
 
-if len(options) < 1:
-  print(json.dumps(outlist))
-  exit(1)
-
 cfg = ProjectConfig.get_instance()
 pio_envs = cfg.envs()
 
 # Gather all PlatformIO environments for filtering later
 all_envs = []
 for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
+  env_build_flags = cfg.get(f"env:{pio_env}", "build_flags")
   env_platform = None
   for flag in env_build_flags:
     # Extract the platform from the build flags
@@ -37,36 +41,35 @@ for pio_env in pio_envs:
     exit(1)
   # Store env details as a dictionary, and add to 'all_envs' list
   env = {
-    'name': pio_env,
-    'platform': env_platform,
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
+    "ci": {"board": pio_env, "platform": env_platform},
+    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 
 # Filter outputs based on options
 # Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
+if "check" in args.platform:
   for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
+    if env["board_check"]:
+      if "pr" in args.level:
+        if env["board_level"] == "pr":
+          outlist.append(env["ci"])
       else:
-        outlist.append(env['name'])
+        outlist.append(env["ci"])
 # Filter (non-check) builds by platform
 else:
   for env in all_envs:
-    if options[0] == env['platform']:
+    if args.platform == env["ci"]["platform"] or args.platform == "all":
       # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
+      if env["board_level"] == "pr":
+        outlist.append(env["ci"])
       # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
+      elif "extra" in args.level and env["board_level"] == "extra":
+        outlist.append(env["ci"])
       # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
+      elif "pr" not in args.level and not env["board_level"]:
+        outlist.append(env["ci"])
 
 # Return as a JSON list
 print(json.dumps(outlist))

bin/web.version

@@ -1 +1 @@
-2.6.4
+2.6.6

platformio.ini

@@ -70,7 +70,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
 	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
@@ -120,7 +120,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/505ffadaa7a931df5dc8153229b719a07bbb028c.zip
+	https://github.com/meshtastic/device-ui/archive/e564d78ae1a7e9a225aaf4a73b1cb84c549f510f.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/detect/ScanI2CTwoWire.cpp

@@ -378,7 +378,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c || registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {

src/gps/GPS.cpp

@@ -506,10 +506,9 @@ bool GPS::setup()
             delay(1000);
 #endif
             if (probeTries < GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]);
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(serialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(serialSpeeds)) {
                         speedSelect = 0;
                         ++probeTries;
                     }
@@ -518,10 +517,9 @@ bool GPS::setup()
             // Rare Serial Speeds
 #ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(rareSerialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(rareSerialSpeeds)) {
                         LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE);
                         return true;
                     }
@@ -1033,7 +1031,7 @@ void GPS::down()
     LOG_DEBUG("%us until next search", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
+    if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
@@ -1094,7 +1092,7 @@ int32_t GPS::runOnce()
             return disable();
         }
         if (!setup())
-            return 2000; // Setup failed, re-run in two seconds
+            return currentDelay; // Setup failed, re-run in two seconds
 
         // We have now loaded our saved preferences from flash
         if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
@@ -1104,6 +1102,29 @@ int32_t GPS::runOnce()
         publishUpdate();
     }
 
+    // ======================== GPS_ACTIVE state ========================
+    // In GPS_ACTIVE state, GPS is powered on and we're receiving NMEA messages.
+    // We use the following logic to determine when to update the local position
+    // or time by running GPS::publishUpdate.
+    // Note: Local position update is asynchronous to position broadcast. We
+    // generally run this state every gps_update_interval seconds, and in most cases
+    // gps_update_interval is faster than the position broadcast interval so there's a
+    // fresh position ready when the device wants to broadcast one on the mesh.
+    //
+    // 1. Got a time for the first time --> set the time, don't publish.
+    // 2. Got a lock for the first time
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    //  3. Got a lock after turning back on
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    // 4. Hold has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> down()
+    // 5. Search time has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> If we had a location before but don't now --> publishUpdate
+    //   --> down()
     if (whileActive()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
@@ -1113,55 +1134,81 @@ int32_t GPS::runOnce()
     if (!config.position.fixed_position && powerState != GPS_ACTIVE && scheduling.isUpdateDue())
         up();
 
-    // If we've already set time from the GPS, no need to ask the GPS
-    bool gotTime = (getRTCQuality() >= RTCQualityGPS);
-    if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
-        gotTime = true;
-        shouldPublish = true;
-    }
-
+    // quality of the previous fix. We set it to 0 when we go down, so it's a way
+    // to check if we're getting a lock after being GPS_OFF.
     uint8_t prev_fixQual = fixQual;
-    bool gotLoc = lookForLocation();
-    if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
-        LOG_DEBUG("hasValidLocation RISING EDGE");
-        hasValidLocation = true;
-        shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
 
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
-    }
+    if (powerState == GPS_ACTIVE) {
+        // if gps_update_interval is <=10s, GPS never goes off, so we treat that differently
+        uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval);
 
-    bool tooLong = scheduling.searchedTooLong();
-    if (tooLong)
-        LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
+        // 1. Got a time for the first time
+        bool gotTime = (getRTCQuality() >= RTCQualityGPS);
+        if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
+            gotTime = true;
+        }
 
-    // Once we get a location we no longer desperately want an update
-    if ((gotLoc && gotTime) || tooLong) {
+        // 2. Got a lock for the first time, or 3. Got a lock after turning back on
+        bool gotLoc = lookForLocation();
+        if (gotLoc) {
+#ifdef GPS_DEBUG
+            if (!hasValidLocation) { // declare that we have location ASAP
+                LOG_DEBUG("hasValidLocation RISING EDGE");
+            }
+#endif
+            if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS) {
+                hasValidLocation = true;
+                shouldPublish = true;
+            } else if (!hasValidLocation || prev_fixQual == 0 || (fixHoldEnds + GPS_THREAD_INTERVAL) < millis()) {
+                hasValidLocation = true;
+                // Hold for up to 20secs after getting a lock to download ephemeris etc
+                uint32_t holdTime = updateInterval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS;
+                if (holdTime > GPS_FIX_HOLD_MAX_MS)
+                    holdTime = GPS_FIX_HOLD_MAX_MS;
+                fixHoldEnds = millis() + holdTime;
+#ifdef GPS_DEBUG
+                LOG_DEBUG("Holding for %ums after lock", holdTime);
+#endif
+            }
+        }
+
+        bool tooLong = scheduling.searchedTooLong();
         if (tooLong && !gotLoc) {
+            LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
-                LOG_DEBUG("hasValidLocation FALLING EDGE");
-            }
-            p = meshtastic_Position_init_default;
-            hasValidLocation = false;
-        }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
+                p = meshtastic_Position_init_default;
+                hasValidLocation = false;
+                shouldPublish = true;
 #ifdef GPS_DEBUG
-        } else {
+                LOG_DEBUG("hasValidLocation FALLING EDGE");
+#endif
+            }
+        }
+
+        // Hold has expired , Search time has expired, we got a time only, or we never needed to hold.
+        bool holdExpired = (fixHoldEnds != 0 && millis() > fixHoldEnds);
+        if (shouldPublish || tooLong || holdExpired) {
+            if (gotTime && hasValidLocation) {
+                shouldPublish = true;
+            }
+            if (shouldPublish) {
+                fixHoldEnds = 0;
+                publishUpdate();
+            }
+
+            // There's a chance we just got a time, so keep going to see if we can get a location too
+            if (tooLong || holdExpired) {
+                down();
+            }
+
+#ifdef GPS_DEBUG
+        } else if (fixHoldEnds != 0) {
             LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
 #endif
         }
     }
-
-    // If state has changed do a publish
-    publishUpdate();
+    // ===================== end GPS_ACTIVE state ========================
 
     if (config.position.fixed_position == true && hasValidLocation)
         return disable(); // This should trigger when we have a fixed position, and get that first position
@@ -1218,163 +1265,197 @@ static const char *DETECTED_MESSAGE = "%s detected";
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
+    uint8_t buffer[768] = {0};
+
+    switch (currentStep) {
+    case 0: {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-    _serial_gps->end();
-    _serial_gps->begin(serialSpeed);
+        _serial_gps->end();
+        _serial_gps->begin(serialSpeed);
 #elif defined(ARCH_RP2040)
-    _serial_gps->end();
-    _serial_gps->setFIFOSize(256);
-    _serial_gps->begin(serialSpeed);
+        _serial_gps->end();
+        _serial_gps->setFIFOSize(256);
+        _serial_gps->begin(serialSpeed);
 #else
-    if (_serial_gps->baudRate() != serialSpeed) {
-        LOG_DEBUG("Set Baud to %i", serialSpeed);
-        _serial_gps->updateBaudRate(serialSpeed);
-    }
+        if (_serial_gps->baudRate() != serialSpeed) {
+            LOG_DEBUG("Set GPS Baud to %i", serialSpeed);
+            _serial_gps->updateBaudRate(serialSpeed);
+        }
 #endif
 
-    memset(&ublox_info, 0, sizeof(ublox_info));
-    uint8_t buffer[768] = {0};
-    delay(100);
+        memset(&ublox_info, 0, sizeof(ublox_info));
+        delay(100);
 
-    // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
-    _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
-    delay(20);
-    // Close NMEA sequences on Ublox
-    _serial_gps->write("$PUBX,40,GLL,0,0,0,0,0,0*5C\r\n");
-    _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
-    _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
-    delay(20);
-    // Close NMEA sequences on CM121
-    _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
-    _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
-    _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
-    delay(20);
-
-    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
-    std::vector<ChipInfo> unicore = {
-        {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
-    PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
-
-    std::vector<ChipInfo> atgm = {
-        {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
-        /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
-        {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
-    PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
-
-    /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
-    _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
-    _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
-    _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
-    std::vector<ChipInfo> airoha = {{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-                                    {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-                                    {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
-    PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
-
-    PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
-    PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
-
-    // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
-    _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
-    delay(20);
-    std::vector<ChipInfo> mtk = {{"L76B", "Quectel-L76B", GNSS_MODEL_MTK_L76B}, {"PA1010D", "1010D", GNSS_MODEL_MTK_PA1010D},
-                                 {"PA1616S", "1616S", GNSS_MODEL_MTK_PA1616S},  {"LS20031", "MC-1513", GNSS_MODEL_MTK_L76B},
-                                 {"L96", "Quectel-L96", GNSS_MODEL_MTK_L76B},   {"L80-R", "_3337_", GNSS_MODEL_MTK_L76B},
-                                 {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
-
-    PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
-
-    uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
-    UBXChecksum(cfg_rate, sizeof(cfg_rate));
-    clearBuffer();
-    _serial_gps->write(cfg_rate, sizeof(cfg_rate));
-    // Check that the returned response class and message ID are correct
-    GPS_RESPONSE response = getACK(0x06, 0x08, 750);
-    if (response == GNSS_RESPONSE_NONE) {
-        LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+        // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
+        _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
+        delay(20);
+        // Close NMEA sequences on Ublox
+        _serial_gps->write("$PUBX,40,GLL,0,0,0,0,0,0*5C\r\n");
+        _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
+        _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
+        delay(20);
+        // Close NMEA sequences on CM121
+        _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
+        _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
+        _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
+        currentDelay = 20;
+        currentStep = 1;
         return GNSS_MODEL_UNKNOWN;
-    } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
-        LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
     }
+    case 1: {
 
-    memset(buffer, 0, sizeof(buffer));
-    uint8_t _message_MONVER[8] = {
-        0xB5, 0x62, // Sync message for UBX protocol
-        0x0A, 0x04, // Message class and ID (UBX-MON-VER)
-        0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
-        0x00, 0x00  // Checksum
-    };
-    //  Get Ublox gnss module hardware and software info
-    UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
-    clearBuffer();
-    _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
+        // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
+        std::vector<ChipInfo> unicore = {
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
+        PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
+        currentDelay = 20;
+        currentStep = 2;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 2: {
+        std::vector<ChipInfo> atgm = {
+            {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
+            /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
+            {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
+        PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
+        currentDelay = 20;
+        currentStep = 3;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 3: {
+        /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
+        _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
+        _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
+        _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
+        std::vector<ChipInfo> airoha = {{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+                                        {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+                                        {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
+        PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
+        currentDelay = 20;
+        currentStep = 4;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 4: {
+        PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
+        PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
+        currentDelay = 20;
+        currentStep = 5;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 5: {
 
-    uint16_t len = getACK(buffer, sizeof(buffer), 0x0A, 0x04, 1200);
-    if (len) {
-        uint16_t position = 0;
-        for (int i = 0; i < 30; i++) {
-            ublox_info.swVersion[i] = buffer[position];
-            position++;
-        }
-        for (int i = 0; i < 10; i++) {
-            ublox_info.hwVersion[i] = buffer[position];
-            position++;
-        }
+        // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
+        _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
+        delay(20);
+        std::vector<ChipInfo> mtk = {{"L76B", "Quectel-L76B", GNSS_MODEL_MTK_L76B}, {"PA1010D", "1010D", GNSS_MODEL_MTK_PA1010D},
+                                     {"PA1616S", "1616S", GNSS_MODEL_MTK_PA1616S},  {"LS20031", "MC-1513", GNSS_MODEL_MTK_L76B},
+                                     {"L96", "Quectel-L96", GNSS_MODEL_MTK_L76B},   {"L80-R", "_3337_", GNSS_MODEL_MTK_L76B},
+                                     {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
 
-        while (len >= position + 30) {
-            for (int i = 0; i < 30; i++) {
-                ublox_info.extension[ublox_info.extensionNo][i] = buffer[position];
-                position++;
-            }
-            ublox_info.extensionNo++;
-            if (ublox_info.extensionNo > 9)
-                break;
-        }
-
-        LOG_DEBUG("Module Info : ");
-        LOG_DEBUG("Soft version: %s", ublox_info.swVersion);
-        LOG_DEBUG("Hard version: %s", ublox_info.hwVersion);
-        LOG_DEBUG("Extensions:%d", ublox_info.extensionNo);
-        for (int i = 0; i < ublox_info.extensionNo; i++) {
-            LOG_DEBUG("  %s", ublox_info.extension[i]);
+        PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
+        currentDelay = 20;
+        currentStep = 6;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 6: {
+        uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
+        UBXChecksum(cfg_rate, sizeof(cfg_rate));
+        clearBuffer();
+        _serial_gps->write(cfg_rate, sizeof(cfg_rate));
+        // Check that the returned response class and message ID are correct
+        GPS_RESPONSE response = getACK(0x06, 0x08, 750);
+        if (response == GNSS_RESPONSE_NONE) {
+            LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+            currentDelay = 2000;
+            currentStep = 0;
+            return GNSS_MODEL_UNKNOWN;
+        } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
+            LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
         }
 
         memset(buffer, 0, sizeof(buffer));
+        uint8_t _message_MONVER[8] = {
+            0xB5, 0x62, // Sync message for UBX protocol
+            0x0A, 0x04, // Message class and ID (UBX-MON-VER)
+            0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
+            0x00, 0x00  // Checksum
+        };
+        //  Get Ublox gnss module hardware and software info
+        UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
+        clearBuffer();
+        _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
 
-        // tips: extensionNo field is 0 on some 6M GNSS modules
-        for (int i = 0; i < ublox_info.extensionNo; ++i) {
-            if (!strncmp(ublox_info.extension[i], "MOD=", 4)) {
-                strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer));
-            } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) {
-                char *ptr = nullptr;
-                memset(buffer, 0, sizeof(buffer));
-                strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer));
-                LOG_DEBUG("Protocol Version:%s", (char *)buffer);
-                if (strlen((char *)buffer)) {
-                    ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10);
-                    LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version);
-                } else {
-                    ublox_info.protocol_version = 0;
+        uint16_t len = getACK(buffer, sizeof(buffer), 0x0A, 0x04, 1200);
+        if (len) {
+            uint16_t position = 0;
+            for (int i = 0; i < 30; i++) {
+                ublox_info.swVersion[i] = buffer[position];
+                position++;
+            }
+            for (int i = 0; i < 10; i++) {
+                ublox_info.hwVersion[i] = buffer[position];
+                position++;
+            }
+
+            while (len >= position + 30) {
+                for (int i = 0; i < 30; i++) {
+                    ublox_info.extension[ublox_info.extensionNo][i] = buffer[position];
+                    position++;
+                }
+                ublox_info.extensionNo++;
+                if (ublox_info.extensionNo > 9)
+                    break;
+            }
+
+            LOG_DEBUG("Module Info : ");
+            LOG_DEBUG("Soft version: %s", ublox_info.swVersion);
+            LOG_DEBUG("Hard version: %s", ublox_info.hwVersion);
+            LOG_DEBUG("Extensions:%d", ublox_info.extensionNo);
+            for (int i = 0; i < ublox_info.extensionNo; i++) {
+                LOG_DEBUG("  %s", ublox_info.extension[i]);
+            }
+
+            memset(buffer, 0, sizeof(buffer));
+
+            // tips: extensionNo field is 0 on some 6M GNSS modules
+            for (int i = 0; i < ublox_info.extensionNo; ++i) {
+                if (!strncmp(ublox_info.extension[i], "MOD=", 4)) {
+                    strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer));
+                } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) {
+                    char *ptr = nullptr;
+                    memset(buffer, 0, sizeof(buffer));
+                    strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer));
+                    LOG_DEBUG("Protocol Version:%s", (char *)buffer);
+                    if (strlen((char *)buffer)) {
+                        ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10);
+                        LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version);
+                    } else {
+                        ublox_info.protocol_version = 0;
+                    }
                 }
             }
-        }
-        if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) {
-            LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6");
-            return GNSS_MODEL_UBLOX6;
-        } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) {
-            LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7");
-            return GNSS_MODEL_UBLOX7;
-        } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) {
-            LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8");
-            return GNSS_MODEL_UBLOX8;
-        } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) {
-            LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9");
-            return GNSS_MODEL_UBLOX9;
-        } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) {
-            LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10");
-            return GNSS_MODEL_UBLOX10;
+            if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) {
+                LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6");
+                return GNSS_MODEL_UBLOX6;
+            } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) {
+                LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7");
+                return GNSS_MODEL_UBLOX7;
+            } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) {
+                LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8");
+                return GNSS_MODEL_UBLOX8;
+            } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) {
+                LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9");
+                return GNSS_MODEL_UBLOX9;
+            } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) {
+                LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10");
+                return GNSS_MODEL_UBLOX10;
+            }
         }
     }
+    }
     LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+    currentDelay = 2000;
+    currentStep = 0;
     return GNSS_MODEL_UNKNOWN;
 }
 

src/gps/GPS.h

@@ -16,6 +16,9 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
+static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
+static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
+
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
@@ -151,6 +154,8 @@ class GPS : private concurrency::OSThread
     TinyGPSPlus reader;
     uint8_t fixQual = 0; // fix quality from GPGGA
     uint32_t lastChecksumFailCount = 0;
+    uint8_t currentStep = 0;
+    int32_t currentDelay = 2000;
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
@@ -173,8 +178,6 @@ class GPS : private concurrency::OSThread
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
-    bool isInPowersave = false;
-
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
 
     bool hasGPS = false; // Do we have a GPS we are talking to

src/graphics/Screen.cpp

@@ -1503,7 +1503,7 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
                 screen->showSimpleBanner(banner, 1500);
                 if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
                     (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
-                    (!isBroadcast(packet->to) && isToUs(p))) {
+                    (!isBroadcast(packet->to) && isToUs(packet))) {
                     // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
                     // - packet contains an alert and alert bell buzzer is enabled
                     // - packet is a non-broadcast that is addressed to this node

src/mesh/NodeDB.cpp

@@ -1874,6 +1874,13 @@ uint8_t NodeDB::getMeshNodeChannel(NodeNum n)
     return info->channel;
 }
 
+std::string NodeDB::getNodeId() const
+{
+    char nodeId[16];
+    snprintf(nodeId, sizeof(nodeId), "!%08x", myNodeInfo.my_node_num);
+    return std::string(nodeId);
+}
+
 /// Find a node in our DB, return null for missing
 /// NOTE: This function might be called from an ISR
 meshtastic_NodeInfoLite *NodeDB::getMeshNode(NodeNum n)

src/mesh/NodeDB.h

@@ -5,6 +5,7 @@
 #include <algorithm>
 #include <assert.h>
 #include <pb_encode.h>
+#include <string>
 #include <vector>
 
 #include "MeshTypes.h"
@@ -203,6 +204,9 @@ class NodeDB
     /// @return our node number
     NodeNum getNodeNum() { return myNodeInfo.my_node_num; }
 
+    /// @return our node ID as a string in the format "!xxxxxxxx"
+    std::string getNodeId() const;
+
     // @return last byte of a NodeNum, 0xFF if it ended at 0x00
     uint8_t getLastByteOfNodeNum(NodeNum num) { return (uint8_t)((num & 0xFF) ? (num & 0xFF) : 0xFF); }
 

src/mesh/PhoneAPI.cpp

@@ -433,6 +433,8 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
     case STATE_SEND_OTHER_NODEINFOS: {
         LOG_DEBUG("Send known nodes");
         if (nodeInfoForPhone.num != 0) {
+            // Just in case we stored a different user.id in the past, but should never happen going forward
+            sprintf(nodeInfoForPhone.user.id, "!%08x", nodeInfoForPhone.num);
             LOG_INFO("nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s", nodeInfoForPhone.num, nodeInfoForPhone.last_heard,
                      nodeInfoForPhone.user.id, nodeInfoForPhone.user.long_name);
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_node_info_tag;

src/mesh/wifi/WiFiAPClient.cpp

@@ -94,11 +94,11 @@ static void onNetworkConnected()
 // ESPmDNS (ESP32) and SimpleMDNS (RP2040) have slightly different APIs for adding TXT records
 #ifdef ARCH_ESP32
             MDNS.addServiceTxt("meshtastic", "tcp", "shortname", String(owner.short_name));
-            MDNS.addServiceTxt("meshtastic", "tcp", "id", String(owner.id));
+            MDNS.addServiceTxt("meshtastic", "tcp", "id", String(nodeDB->getNodeId().c_str()));
             // ESP32 prints obtained IP address in WiFiEvent
 #elif defined(ARCH_RP2040)
             MDNS.addServiceTxt("meshtastic", "shortname", owner.short_name);
-            MDNS.addServiceTxt("meshtastic", "id", owner.id);
+            MDNS.addServiceTxt("meshtastic", "id", nodeDB->getNodeId().c_str());
             LOG_INFO("Obtained IP address: %s", WiFi.localIP().toString().c_str());
 #endif
         }

src/modules/NodeInfoModule.cpp

@@ -113,8 +113,12 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
             u.public_key.size = 0;
         }
 
-        // Clear the user.id field since it should be derived from node number on the receiving end
-        u.id[0] = '\0';
+        // FIXME: Clear the user.id field since it should be derived from node number on the receiving end
+        // u.id[0] = '\0';
+
+        // Ensure our user.id is derived correctly
+        strcpy(u.id, nodeDB->getNodeId().c_str());
+
         LOG_INFO("Send owner %s/%s/%s", u.id, u.long_name, u.short_name);
         lastSentToMesh = millis();
         return allocDataProtobuf(u);

src/modules/SerialModule.cpp

@@ -67,7 +67,7 @@ SerialModuleRadio *serialModuleRadio;
     defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172)
+#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172) || defined(EBYTE_E77_MBL)
 SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial1;
 #else

src/mqtt/MQTT.cpp

@@ -60,7 +60,9 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
         return;
     }
     const meshtastic_Channel &ch = channels.getByName(e.channel_id);
-    if (strcmp(e.gateway_id, owner.id) == 0) {
+    // Generate node ID from nodenum for comparison
+    std::string nodeId = nodeDB->getNodeId();
+    if (strcmp(e.gateway_id, nodeId.c_str()) == 0) {
         // Generate an implicit ACK towards ourselves (handled and processed only locally!) for this message.
         // We do this because packets are not rebroadcasted back into MQTT anymore and we assume that at least one node
         // receives it when we get our own packet back. Then we'll stop our retransmissions.
@@ -128,8 +130,10 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
 // returns true if this is a valid JSON envelope which we accept on downlink
 inline bool isValidJsonEnvelope(JSONObject &json)
 {
+    // Generate node ID from nodenum for comparison
+    std::string nodeId = nodeDB->getNodeId();
     // if "sender" is provided, avoid processing packets we uplinked
-    return (json.find("sender") != json.end() ? (json["sender"]->AsString().compare(owner.id) != 0) : true) &&
+    return (json.find("sender") != json.end() ? (json["sender"]->AsString().compare(nodeId) != 0) : true) &&
            (json.find("hopLimit") != json.end() ? json["hopLimit"]->IsNumber() : true) && // hop limit should be a number
            (json.find("from") != json.end()) && json["from"]->IsNumber() &&
            (json["from"]->AsNumber() == nodeDB->getNodeNum()) &&            // only accept message if the "from" is us
@@ -297,7 +301,9 @@ bool connectPubSub(const PubSubConfig &config, PubSubClient &pubSub, Client &cli
     LOG_INFO("Connecting directly to MQTT server %s, port: %d, username: %s, password: %s", config.serverAddr.c_str(),
              config.serverPort, config.mqttUsername, config.mqttPassword);
 
-    const bool connected = pubSub.connect(owner.id, config.mqttUsername, config.mqttPassword);
+    // Generate node ID from nodenum for client identification
+    std::string nodeId = nodeDB->getNodeId();
+    const bool connected = pubSub.connect(nodeId.c_str(), config.mqttUsername, config.mqttPassword);
     if (connected) {
         LOG_INFO("MQTT connected");
     } else {
@@ -687,11 +693,14 @@ void MQTT::publishQueuedMessages()
     if (jsonString.length() == 0)
         return;
 
+    // Generate node ID from nodenum for topic
+    std::string nodeId = nodeDB->getNodeId();
+
     std::string topicJson;
     if (env.packet->pki_encrypted) {
-        topicJson = jsonTopic + "PKI/" + owner.id;
+        topicJson = jsonTopic + "PKI/" + nodeId;
     } else {
-        topicJson = jsonTopic + env.channel_id + "/" + owner.id;
+        topicJson = jsonTopic + env.channel_id + "/" + nodeId;
     }
     LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(), jsonString.c_str());
     publish(topicJson.c_str(), jsonString.c_str(), false);
@@ -749,10 +758,14 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_Me
         return; // Don't upload a still-encrypted PKI packet if not encryption_enabled
     }
 
-    const meshtastic_ServiceEnvelope env = {
-        .packet = const_cast<meshtastic_MeshPacket *>(p), .channel_id = const_cast<char *>(channelId), .gateway_id = owner.id};
+    // Generate node ID from nodenum for service envelope
+    std::string nodeId = nodeDB->getNodeId();
+
+    const meshtastic_ServiceEnvelope env = {.packet = const_cast<meshtastic_MeshPacket *>(p),
+                                            .channel_id = const_cast<char *>(channelId),
+                                            .gateway_id = const_cast<char *>(nodeId.c_str())};
     size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, &env);
-    std::string topic = cryptTopic + channelId + "/" + owner.id;
+    std::string topic = cryptTopic + channelId + "/" + nodeId;
 
     if (moduleConfig.mqtt.proxy_to_client_enabled || this->isConnectedDirectly()) {
         LOG_DEBUG("MQTT Publish %s, %u bytes", topic.c_str(), numBytes);
@@ -766,7 +779,9 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_Me
         auto jsonString = MeshPacketSerializer::JsonSerialize(&mp_decoded);
         if (jsonString.length() == 0)
             return;
-        std::string topicJson = jsonTopic + channelId + "/" + owner.id;
+        // Generate node ID from nodenum for JSON topic
+        std::string nodeIdForJson = nodeDB->getNodeId();
+        std::string topicJson = jsonTopic + channelId + "/" + nodeIdForJson;
         LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(), jsonString.c_str());
         publish(topicJson.c_str(), jsonString.c_str(), false);
 #endif // ARCH_NRF52 NRF52_USE_JSON
@@ -845,11 +860,14 @@ void MQTT::perhapsReportToMap()
     mp->decoded.payload.size =
         pb_encode_to_bytes(mp->decoded.payload.bytes, sizeof(mp->decoded.payload.bytes), &meshtastic_MapReport_msg, &mapReport);
 
+    // Generate node ID from nodenum for service envelope
+    std::string nodeId = nodeDB->getNodeId();
+
     // Encode the MeshPacket into a binary ServiceEnvelope and publish
     const meshtastic_ServiceEnvelope se = {
         .packet = mp,
         .channel_id = (char *)channels.getGlobalId(channels.getPrimaryIndex()), // Use primary channel as the channel_id
-        .gateway_id = owner.id};
+        .gateway_id = const_cast<char *>(nodeId.c_str())};
     size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, &se);
 
     LOG_INFO("MQTT Publish map report to %s", mapTopic.c_str());

src/serialization/MeshPacketSerializer.cpp

@@ -413,7 +413,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
     jsonObj["from"] = new JSONValue((unsigned int)mp->from);
     jsonObj["channel"] = new JSONValue((unsigned int)mp->channel);
     jsonObj["type"] = new JSONValue(msgType.c_str());
-    jsonObj["sender"] = new JSONValue(owner.id);
+    jsonObj["sender"] = new JSONValue(nodeDB->getNodeId().c_str());
     if (mp->rx_rssi != 0)
         jsonObj["rssi"] = new JSONValue((int)mp->rx_rssi);
     if (mp->rx_snr != 0)

src/serialization/MeshPacketSerializer_nRF52.cpp

@@ -353,7 +353,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
     jsonObj["from"] = (unsigned int)mp->from;
     jsonObj["channel"] = (unsigned int)mp->channel;
     jsonObj["type"] = msgType.c_str();
-    jsonObj["sender"] = owner.id;
+    jsonObj["sender"] = nodeDB->getNodeId().c_str();
     if (mp->rx_rssi != 0)
         jsonObj["rssi"] = (int)mp->rx_rssi;
     if (mp->rx_snr != 0)

test/test_mqtt/MQTT.cpp

@@ -332,7 +332,7 @@ void setUp(void)
     };
     channelFile.channels_count = 1;
     owner = meshtastic_User{.id = "!12345678"};
-    myNodeInfo = meshtastic_MyNodeInfo{.my_node_num = 10};
+    myNodeInfo = meshtastic_MyNodeInfo{.my_node_num = 0x12345678}; // Match the expected gateway ID in topic
     localPosition =
         meshtastic_Position{.has_latitude_i = true, .latitude_i = 7 * 1e7, .has_longitude_i = true, .longitude_i = 3 * 1e7};
 
@@ -591,7 +591,7 @@ void test_receiveEncryptedPKITopicToUs(void)
 // Should ignore messages published to MQTT by this gateway.
 void test_receiveIgnoresOwnPublishedMessages(void)
 {
-    unitTest->publish(&decoded, owner.id);
+    unitTest->publish(&decoded, nodeDB->getNodeId().c_str());
 
     TEST_ASSERT_TRUE(mockRouter->packets_.empty());
     TEST_ASSERT_TRUE(mockRoutingModule->ackNacks_.empty());
@@ -603,7 +603,7 @@ void test_receiveAcksOwnSentMessages(void)
     meshtastic_MeshPacket p = decoded;
     p.from = myNodeInfo.my_node_num;
 
-    unitTest->publish(&p, owner.id);
+    unitTest->publish(&p, nodeDB->getNodeId().c_str());
 
     TEST_ASSERT_TRUE(mockRouter->packets_.empty());
     TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());

variants/native/portduino-buildroot/platformio.ini

@@ -4,5 +4,6 @@ extends = portduino_base
 ; environment variable in the buildroot environment.
 build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
 board = buildroot
+board_level = extra
 lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}

variants/native/portduino/platformio.ini

@@ -3,6 +3,7 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
 board = cross_platform
+board_level = extra
 lib_deps = 
   ${portduino_base.lib_deps}
   melopero/Melopero RV3028@^1.1.0
@@ -50,7 +51,6 @@ build_type = release
 lib_deps =
   ${native_base.lib_deps}
   ${device-ui_base.lib_deps}
-board_level = extra
 build_flags = ${native_base.build_flags} -Os -ffunction-sections -fdata-sections -Wl,--gc-sections
   -D RAM_SIZE=8192
   -D USE_FRAMEBUFFER=1
@@ -79,7 +79,6 @@ build_type = debug
 lib_deps =
   ${native_base.lib_deps}
   ${device-ui_base.lib_deps}
-board_level = extra
 build_flags = ${native_base.build_flags} -O0 -fsanitize=address -lX11 -linput -lxkbcommon
   -D DEBUG_HEAP
   -D RAM_SIZE=16384
@@ -108,3 +107,7 @@ build_src_filter = ${env:native-tft.build_src_filter}
 [env:coverage]
 extends = env:native
 build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:native.build_flags}
+; https://docs.platformio.org/en/latest/projectconf/sections/env/options/test/test_testing_command.html
+test_testing_command =
+  ${platformio.build_dir}/${this.__env__}/program
+  -s

variants/stm32/CDEBYTE_E77-MBL/platformio.ini

@@ -6,9 +6,12 @@ board_level = extra
 build_flags =
   ${stm32_base.build_flags}
   -Ivariants/stm32/CDEBYTE_E77-MBL
-  -DSERIAL_UART_INSTANCE=1
+  -DSERIAL_UART_INSTANCE=2
   -DPIN_SERIAL_RX=PA3
   -DPIN_SERIAL_TX=PA2
+  -DENABLE_HWSERIAL1
+  -DPIN_SERIAL1_RX=PB7
+  -DPIN_SERIAL1_TX=PB6
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
   -DMESHTASTIC_EXCLUDE_GPS=1

variants/stm32/CDEBYTE_E77-MBL/variant.h

@@ -18,4 +18,6 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PB4 // LED1
 // #define LED_PIN PB3 // LED2
 #define LED_STATE_ON 1
+
+#define EBYTE_E77_MBL
 #endif

variants/stm32/rak3172/platformio.ini

@@ -6,7 +6,6 @@ board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 build_flags =
   ${stm32_base.build_flags}
   -Ivariants/stm32/rak3172
-  -DRAK3172
   -DENABLE_HWSERIAL1
   -DPIN_SERIAL1_RX=PB7
   -DPIN_SERIAL1_TX=PB6

variants/stm32/rak3172/variant.h

@@ -16,4 +16,6 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PA0 // Green LED
 #define LED_STATE_ON 1
 
+#define RAK3172
+
 #endif