Add evicted age and accessor in NodeDB

* Don't Mute DMs just because we mute a channel

* Updated code to consolidate muting

src/DebugConfiguration.h

@@ -13,11 +13,6 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
-// WIFI LED
-#ifndef WIFI_STATE_ON
-#define WIFI_STATE_ON 1
-#endif
-
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -152,9 +147,7 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && defined(USE_CH390D)
-#include <ESP32_CH390.h>
-#elif HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/graphics/draw/DebugRenderer.cpp

@@ -438,7 +438,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         if (currentResolution == ScreenResolution::UltraLow) {
             snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
         } else {
-            snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
+            snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz (%d)", freqStr, config.lora.channel_num);
         }
     }
     size_t len = strlen(frequencyslot);

src/graphics/draw/MenuHandler.cpp

@@ -65,12 +65,12 @@ uint8_t test_count = 0;
 
 void menuHandler::loraMenu()
 {
-    static const char *optionsArray[] = {"Back", "Device Role", "Radio Preset", "LoRa Region"};
-    enum optionsNumbers { Back = 0, device_role_picker = 1, radio_preset_picker = 2, lora_picker = 3 };
+    static const char *optionsArray[] = {"Back", "Device Role", "Radio Preset", "Frequency Slot", "LoRa Region"};
+    enum optionsNumbers { Back = 0, device_role_picker = 1, radio_preset_picker = 2, frequency_slot = 3, lora_picker = 4 };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "LoRa Actions";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 4;
+    bannerOptions.optionsCount = 5;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Back) {
             // No action
@@ -78,6 +78,8 @@ void menuHandler::loraMenu()
             menuHandler::menuQueue = menuHandler::device_role_picker;
         } else if (selected == radio_preset_picker) {
             menuHandler::menuQueue = menuHandler::radio_preset_picker;
+        } else if (selected == frequency_slot) {
+            menuHandler::menuQueue = menuHandler::frequency_slot;
         } else if (selected == lora_picker) {
             menuHandler::menuQueue = menuHandler::lora_picker;
         }
@@ -248,6 +250,113 @@ void menuHandler::DeviceRolePicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::FrequencySlotPicker()
+{
+
+    enum ReplyOptions : int { Back = -1 };
+    constexpr int MAX_CHANNEL_OPTIONS = 202;
+    static const char *optionsArray[MAX_CHANNEL_OPTIONS];
+    static int optionsEnumArray[MAX_CHANNEL_OPTIONS];
+    static char channelText[MAX_CHANNEL_OPTIONS - 1][12];
+    int options = 0;
+    optionsArray[options] = "Back";
+    optionsEnumArray[options++] = Back;
+    optionsArray[options] = "Slot 0 (Auto)";
+    optionsEnumArray[options++] = 0;
+
+    // Calculate number of channels (copied from RadioInterface::applyModemConfig())
+    meshtastic_Config_LoRaConfig &loraConfig = config.lora;
+    double bw = loraConfig.bandwidth;
+    if (loraConfig.use_preset) {
+        switch (loraConfig.modem_preset) {
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        default:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        }
+    } else {
+        bw = loraConfig.bandwidth;
+        if (bw == 31) // This parameter is not an integer
+            bw = 31.25;
+        if (bw == 62) // Fix for 62.5Khz bandwidth
+            bw = 62.5;
+        if (bw == 200)
+            bw = 203.125;
+        if (bw == 400)
+            bw = 406.25;
+        if (bw == 800)
+            bw = 812.5;
+        if (bw == 1600)
+            bw = 1625.0;
+    }
+
+    uint32_t numChannels = 0;
+    if (myRegion) {
+        numChannels = (uint32_t)floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000.0)));
+    } else {
+        LOG_WARN("Region not set, cannot calculate number of channels");
+        return;
+    }
+
+    if (numChannels > (uint32_t)(MAX_CHANNEL_OPTIONS - 2))
+        numChannels = (uint32_t)(MAX_CHANNEL_OPTIONS - 2);
+
+    for (uint32_t ch = 1; ch <= numChannels; ch++) {
+        snprintf(channelText[ch - 1], sizeof(channelText[ch - 1]), "Slot %lu", (unsigned long)ch);
+        optionsArray[options] = channelText[ch - 1];
+        optionsEnumArray[options++] = (int)ch;
+    }
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Frequency Slot";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsCount = options;
+
+    // Start highlight on current channel if possible, otherwise on "1"
+    int initial = (int)config.lora.channel_num + 1;
+    if (initial < 2 || initial > (int)numChannels + 1)
+        initial = 1;
+    bannerOptions.InitialSelected = initial;
+
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Back) {
+            menuHandler::menuQueue = menuHandler::lora_Menu;
+            screen->runNow();
+            return;
+        }
+
+        config.lora.channel_num = selected;
+        service->reloadConfig(SEGMENT_CONFIG);
+        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+    };
+
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::RadioPresetPicker()
 {
     static const RadioPresetOption presetOptions[] = {
@@ -278,6 +387,8 @@ void menuHandler::RadioPresetPicker()
             }
 
             config.lora.modem_preset = option.value;
+            config.lora.channel_num = 0;        // Reset to default channel for the preset
+            config.lora.override_frequency = 0; // Clear any custom frequency
             service->reloadConfig(SEGMENT_CONFIG);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
@@ -2551,6 +2662,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case radio_preset_picker:
         RadioPresetPicker();
         break;
+    case frequency_slot:
+        FrequencySlotPicker();
+        break;
     case no_timeout_lora_picker:
         LoraRegionPicker(0);
         break;

src/graphics/draw/MenuHandler.h

@@ -13,6 +13,7 @@ class menuHandler
         lora_picker,
         device_role_picker,
         radio_preset_picker,
+        frequency_slot,
         no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
@@ -63,6 +64,7 @@ class menuHandler
     static void loraMenu();
     static void DeviceRolePicker();
     static void RadioPresetPicker();
+    static void FrequencySlotPicker();
     static void handleMenuSwitch(OLEDDisplay *display);
     static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);
     static void clockMenu();

src/main.cpp

@@ -337,7 +337,7 @@ void setup()
 
 #ifdef WIFI_LED
     pinMode(WIFI_LED, OUTPUT);
-    digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
+    digitalWrite(WIFI_LED, LOW);
 #endif
 
 #ifdef BLE_LED

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/NodeDB.cpp

@@ -2029,6 +2029,7 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
             }
             // if we found a "boring" node, evict it
             if (oldestBoringIndex != -1) {
+                evictedAge = sinceLastSeen(&meshNodes->at(oldestBoringIndex));
                 oldestIndex = oldestBoringIndex;
             }
 
@@ -2040,6 +2041,7 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n)
                 (numMeshNodes)--;
             }
         }
+        LOG_WARN("Evicted node %u secs old", evictedAge);
         // add the node at the end
         lite = &meshNodes->at((numMeshNodes)++);
 

src/mesh/NodeDB.h

@@ -307,7 +307,10 @@ class NodeDB
         newStatus.notifyObservers(&status);
     }
 
+    uint32_t get_evicted_age() { return evictedAge; }
+
   private:
+    uint32_t evictedAge = UINT32_MAX;
     bool duplicateWarned = false;
     bool localPositionUpdatedSinceBoot = false;
     uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
+#if HAS_ETHERNET && !defined(USE_WS5500)
 
 #include "ethServerAPI.h"
 

src/mesh/api/ethServerAPI.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
-#if !defined(USE_WS5500) && !defined(USE_CH390D)
+#ifndef USE_WS5500
 #include <RAK13800_W5100S.h>
 
 /**

src/mesh/http/ContentHandler.cpp

@@ -173,7 +173,7 @@ void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res)
 
     if (req->getMethod() == "OPTIONS") {
         res->setStatusCode(204); // Success with no content
-        // res->print(""); @todo remove
+        res->print("");
         return;
     }
 
@@ -223,7 +223,7 @@ void handleAPIv1ToRadio(HTTPRequest *req, HTTPResponse *res)
 
     if (req->getMethod() == "OPTIONS") {
         res->setStatusCode(204); // Success with no content
-        // res->print(""); @todo remove
+        res->print("");
         return;
     }
 

src/mesh/wifi/WiFiAPClient.cpp

@@ -384,13 +384,13 @@ static void WiFiEvent(WiFiEvent_t event)
 #endif
         }
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
+        digitalWrite(WIFI_LED, HIGH);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         LOG_INFO("Disconnected from WiFi access point");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
+        digitalWrite(WIFI_LED, LOW);
 #endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
@@ -442,13 +442,13 @@ static void WiFiEvent(WiFiEvent_t event)
     case ARDUINO_EVENT_WIFI_AP_START:
         LOG_INFO("WiFi access point started");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
+        digitalWrite(WIFI_LED, HIGH);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STOP:
         LOG_INFO("WiFi access point stopped");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
+        digitalWrite(WIFI_LED, LOW);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STACONNECTED:

src/modules/AdminModule.cpp

@@ -1238,7 +1238,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     }
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
+#if HAS_ETHERNET && !defined(USE_WS5500)
     conn.has_ethernet = true;
     conn.ethernet.has_status = true;
     if (Ethernet.linkStatus() == LinkON) {

src/modules/ExternalNotificationModule.cpp

@@ -460,12 +460,15 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             }
 
             meshtastic_NodeInfoLite *sender = nodeDB->getMeshNode(mp.from);
-            bool mutedNode = false;
-            if (sender) {
-                mutedNode = (sender->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK);
-            }
             meshtastic_Channel ch = channels.getByIndex(mp.channel ? mp.channel : channels.getPrimaryIndex());
 
+            // If we receive a broadcast message, apply channel mute setting
+            // If we receive a direct message and the receipent is us, apply DM mute setting
+            // Else we just handle it as not muted.
+            const bool directToUs = !isBroadcast(mp.to) && isToUs(&mp);
+            bool is_muted = directToUs ? (sender && ((sender->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0))
+                                       : (ch.settings.has_module_settings && ch.settings.module_settings.is_muted);
+
             if (moduleConfig.external_notification.alert_bell) {
                 if (containsBell) {
                     LOG_INFO("externalNotificationModule - Notification Bell");
@@ -516,8 +519,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 }
             }
 
-            if (moduleConfig.external_notification.alert_message && !mutedNode &&
-                (!ch.settings.has_module_settings || !ch.settings.module_settings.is_muted)) {
+            if (moduleConfig.external_notification.alert_message && !is_muted) {
                 LOG_INFO("externalNotificationModule - Notification Module");
                 isNagging = true;
                 setExternalState(0, true);
@@ -528,8 +530,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 }
             }
 
-            if (moduleConfig.external_notification.alert_message_vibra && !mutedNode &&
-                (!ch.settings.has_module_settings || !ch.settings.module_settings.is_muted)) {
+            if (moduleConfig.external_notification.alert_message_vibra && !is_muted) {
                 LOG_INFO("externalNotificationModule - Notification Module (Vibra)");
                 isNagging = true;
                 setExternalState(1, true);
@@ -540,8 +541,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 }
             }
 
-            if (moduleConfig.external_notification.alert_message_buzzer && !mutedNode &&
-                (!ch.settings.has_module_settings || !ch.settings.module_settings.is_muted)) {
+            if (moduleConfig.external_notification.alert_message_buzzer && !is_muted) {
                 LOG_INFO("externalNotificationModule - Notification Module (Buzzer)");
                 if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
                     (!isBroadcast(mp.to) && isToUs(&mp))) {

src/mqtt/MQTT.h

@@ -15,7 +15,7 @@
 #include <WiFiClientSecure.h>
 #endif
 #endif
-#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
+#if HAS_ETHERNET && !defined(USE_WS5500)
 #include <EthernetClient.h>
 #endif
 

src/platform/portduino/PortduinoGlue.cpp

@@ -55,6 +55,7 @@ void cpuDeepSleep(uint32_t msecs)
 void updateBatteryLevel(uint8_t level) NOT_IMPLEMENTED("updateBatteryLevel");
 
 int TCPPort = SERVER_API_DEFAULT_PORT;
+bool checkConfigPort = true;
 
 static error_t parse_opt(int key, char *arg, struct argp_state *state)
 {
@@ -63,6 +64,7 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
         if (sscanf(arg, "%d", &TCPPort) < 1)
             return ARGP_ERR_UNKNOWN;
         else
+            checkConfigPort = false;
             printf("Using config file %d\n", TCPPort);
         break;
     case 'c':
@@ -870,6 +872,14 @@ bool loadConfig(const char *configPath)
                 std::cout << "Cannot set both MACAddress and MACAddressSource!" << std::endl;
                 exit(EXIT_FAILURE);
             }
+            if (checkConfigPort) {
+                portduino_config.api_port = (yamlConfig["General"]["APIPort"]).as<int>(-1);
+                if (portduino_config.api_port != -1 &&
+                portduino_config.api_port > 1023 &&
+                portduino_config.api_port < 65536) {
+                TCPPort = (portduino_config.api_port);
+                }
+            }
             portduino_config.mac_address = (yamlConfig["General"]["MACAddress"]).as<std::string>("");
             if (portduino_config.mac_address != "") {
                 portduino_config.mac_address_explicit = true;

src/platform/portduino/PortduinoGlue.h

@@ -175,6 +175,7 @@ extern struct portduino_config_struct {
     std::string mac_address = "";
     bool mac_address_explicit = false;
     std::string mac_address_source = "";
+    int api_port = -1;
     std::string config_directory = "";
     std::string available_directory = "/etc/meshtasticd/available.d/";
     int maxtophone = 100;
@@ -508,6 +509,8 @@ extern struct portduino_config_struct {
         out << YAML::Key << "General" << YAML::Value << YAML::BeginMap;
         if (config_directory != "")
             out << YAML::Key << "ConfigDirectory" << YAML::Value << config_directory;
+        if (api_port != -1)
+            out << YAML::Key << "TCPPort" << YAML::Value << api_port;
         if (mac_address_explicit)
             out << YAML::Key << "MACAddress" << YAML::Value << mac_address;
         if (mac_address_source != "")
@@ -519,4 +522,4 @@ extern struct portduino_config_struct {
         out << YAML::EndMap; // General
         return out.c_str();
     }
-} portduino_config;
+} portduino_config;

variants/esp32s3/ELECROW-ThinkNode-G3/pins_arduino.h

@@ -1,26 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <stdint.h>
-
-#define USB_VID 0x303a
-#define USB_PID 0x1001
-
-// The default Wire will be mapped to PMU and RTC
-static const uint8_t SDA = 17;
-static const uint8_t SCL = 18;
-
-// Default SPI will be mapped to Radio
-static const uint8_t SS = 39;
-static const uint8_t MOSI = 40;
-static const uint8_t MISO = 41;
-static const uint8_t SCK = 42;
-
-// #define SPI_MOSI (11)
-// #define SPI_SCK (10)
-// #define SPI_MISO (9)
-// #define SPI_CS (12)
-
-// #define SDCARD_CS SPI_CS
-
-#endif /* Pins_Arduino_h */

variants/esp32s3/ELECROW-ThinkNode-G3/platformio.ini

@@ -1,22 +0,0 @@
-[env:thinknode_g3]
-extends = esp32s3_base
-board = ESP32-S3-WROOM-1-N4
-board_build.psram_type = opi
-
-build_flags = 
-  ${esp32s3_base.build_flags}
-  -D ELECROW_ThinkNode_G3
-  -D HAS_UDP_MULTICAST=1
-  -D BOARD_HAS_PSRAM
-  -D PRIVATE_HW
-#  -D CONFIG_ETH_ENABLED=1
-#  -D CONFIG_ETH_USE_ESP32_EMAC=1
-  -I variants/esp32s3/ELECROW-ThinkNode-G3
-  -mfix-esp32-psram-cache-issue
-
-lib_ignore = 
-    Ethernet
-
-lib_deps = 
-  ${esp32s3_base.lib_deps}
-#  file://../ESP32-CH390/ESP32-CH390-1.0.1.tar.gz

variants/esp32s3/ELECROW-ThinkNode-G3/variant.h

@@ -1,36 +0,0 @@
-#define HAS_GPS 0
-#define HAS_WIRE 0
-#define I2C_NO_RESCAN
-
-#define WIFI_LED 5
-#define WIFI_STATE_ON 0
-
-#define LED_PIN 6 // The blue LORA LED
-#define LED_STATE_ON 0
-#define BUTTON_PIN 4 // the external user button of the device, BOOT and RESET are not accessible without opening it up.
-
-#define USE_SX1262
-#define LORA_SCK 42
-#define LORA_MISO 41
-#define LORA_MOSI 40
-#define LORA_CS 39
-#define LORA_RESET 21
-
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 15
-#define SX126X_BUSY 47
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#define PIN_POWER_EN 45
-
-// #define HAS_ETHERNET 1
-// #define USE_CH390D 1 // this driver uses the same stack as the ESP32 Wifi driver
-
-// #define ETH_MISO_PIN 47
-// #define ETH_MOSI_PIN 21
-// #define ETH_SCLK_PIN 48
-// #define ETH_CS_PIN 45
-// #define ETH_INT_PIN 14
-// #define ETH_RST_PIN -1
-// #define ETH_ADDR 1