Upgrade trunk

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.github/workflows/pr_enforce_labels.yml

@@ -17,7 +17,7 @@ jobs:
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
             const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
             if (!hasRequiredLabel) {
               core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.0
+        uses: actions/stale@v10.1.1
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.2.0
+        uses: dorny/test-reporter@v2.3.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.3
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.492
-    - renovate@42.5.4
-    - prettier@3.6.2
-    - trufflehog@3.90.13
+    - checkov@3.2.495
+    - renovate@42.40.3
+    - prettier@3.7.4
+    - trufflehog@3.91.2
     - yamllint@1.37.1
-    - bandit@1.8.6
-    - trivy@0.67.2
+    - bandit@1.9.2
+    - trivy@0.68.1
     - taplo@0.10.0
-    - ruff@0.14.4
+    - ruff@0.14.8
     - isort@7.0.0
-    - markdownlint@0.45.0
-    - oxipng@9.1.5
+    - markdownlint@0.46.0
+    - oxipng@10.0.0
     - svgo@4.0.0
-    - actionlint@1.7.8
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.11.0
+    - black@25.12.0
     - git-diff-check
-    - gitleaks@8.29.0
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

alpine.Dockerfile

@@ -28,7 +28,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.22
+FROM alpine:3.23
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

arch/esp32/esp32.ini

@@ -57,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.1
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.4.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip

bin/analyze_map.py

@@ -0,0 +1,165 @@
+#!/usr/bin/env python3
+"""Summarise linker map output to highlight heavy object files and libraries.
+
+Usage:
+    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
+
+The script parses GNU ld map files and aggregates section sizes per object file
+and per archive/library, then prints sortable tables that make it easy to spot
+modules worth trimming or hiding behind feature flags.
+"""
+from __future__ import annotations
+
+import argparse
+import collections
+import os
+import re
+import sys
+from typing import DefaultDict, Dict, Tuple
+
+
+SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
+ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
+
+
+def human_size(num_bytes: int) -> str:
+    """Return a friendly size string with one decimal place."""
+    if num_bytes < 1024:
+        return f"{num_bytes:,} B"
+    num = float(num_bytes)
+    for unit in ("KB", "MB", "GB"):
+        num /= 1024.0
+        if num < 1024.0:
+            return f"{num:.1f} {unit}"
+    return f"{num:.1f} TB"
+
+
+def shorten_path(path: str, root: str) -> str:
+    """Prefer repository-relative paths for readability."""
+    path = path.strip()
+    if not path:
+        return path
+
+    # Normalise Windows archives (backslashes) to POSIX style for consistency.
+    path = path.replace("\\", "/")
+
+    # Attempt to strip the root when an absolute path lives inside the repo.
+    if os.path.isabs(path):
+        try:
+            rel = os.path.relpath(path, root)
+            if not rel.startswith(".."):
+                return rel
+        except ValueError:
+            # relpath can fail on mixed drives on Windows; fall back to basename.
+            pass
+    return path
+
+
+def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
+    """Return a human friendly object label and the library it belongs to."""
+    raw_object = raw_object.strip()
+    lib_label = "[app]"
+    match = ARCHIVE_MEMBER_RE.match(raw_object)
+    if match:
+        archive = shorten_path(match.group("archive"), root)
+        obj = match.group("object")
+        lib_label = os.path.basename(archive) or archive
+        label = f"{archive}:{obj}"
+    else:
+        label = shorten_path(raw_object, root)
+        # If the object lives under libs, hint at the containing directory.
+        parent = os.path.basename(os.path.dirname(label))
+        if parent:
+            lib_label = parent
+    return label, lib_label
+
+
+def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
+    per_object: DefaultDict[str, int] = collections.defaultdict(int)
+    per_library: DefaultDict[str, int] = collections.defaultdict(int)
+    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
+
+    try:
+        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
+            for line in handle:
+                match = SECTION_LINE_RE.match(line)
+                if not match:
+                    continue
+
+                section = match.group("section")
+                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
+                    continue
+
+                size = int(match.group("size"), 16)
+                if size == 0:
+                    continue
+
+                obj_token = match.group("object").strip()
+                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
+                    continue
+
+                label, lib_label = describe_object(obj_token, repo_root)
+                per_object[label] += size
+                per_library[lib_label] += size
+                per_object_sections[label][section] += size
+    except FileNotFoundError:
+        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
+
+    return per_object, per_library, per_object_sections
+
+
+def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
+    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
+    parts = []
+    for section, size in items[:limit]:
+        pct = (size / total) * 100 if total else 0
+        parts.append(f"{section} {pct:.1f}%")
+    if len(items) > limit:
+        remainder = total - sum(size for _, size in items[:limit])
+        pct = (remainder / total) * 100 if total else 0
+        parts.append(f"other {pct:.1f}%")
+    return ", ".join(parts)
+
+
+def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
+    total_bytes = sum(per_object.values())
+    if total_bytes == 0:
+        print("No section data found in map file.")
+        return
+
+    print(f"Map file: {map_path}")
+    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
+
+    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
+    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
+    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
+        pct = (size / total_bytes) * 100
+        breakdown = format_section_breakdown(per_object_sections[obj], size)
+        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
+        print(f"    {obj}")
+        if breakdown:
+            print(f"    sections: {breakdown}")
+    print()
+
+    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
+    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
+    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
+        pct = (size / total_bytes) * 100
+        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
+
+
+def main() -> None:
+    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
+    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
+    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
+    args = parser.parse_args()
+
+    map_path = os.path.abspath(args.map)
+    repo_root = os.path.abspath(os.getcwd())
+
+    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
+    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
+
+
+if __name__ == "__main__":
+    main()

meshtasticd.spec.rpkg

@@ -33,7 +33,6 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
-BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)

platformio.ini

@@ -90,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.3.0
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -121,7 +121,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
+	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -169,7 +169,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.4
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -182,8 +182,8 @@ lib_deps =
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
-	wollewald/BH1750_WE@^1.1.10
+	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
+	wollewald/BH1750_WE@1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -213,6 +213,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.1
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/Power.cpp

@@ -707,7 +707,6 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
-            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
@@ -717,7 +716,6 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
-            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
@@ -777,7 +775,7 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#elif USE_EINK
+#elif defined(USE_EINK)
         screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen

src/configuration.h

@@ -250,8 +250,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
+#define CST328_ADDR 0x1A // same address as CST226SE
 #define CHSC6X_ADDR 0x2E
+#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)

src/detect/ScanI2C.h

@@ -85,7 +85,8 @@ class ScanI2C
         DRV2605,
         BH1750,
         DA217,
-        CHSC6X
+        CHSC6X,
+        CST226SE
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -499,7 +499,18 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+            case CST328_ADDR:
+                // Do we have the CST328 or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
+                if (registerValue == 0xA9) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else {
+                    type = CST328;
+                    logFoundDevice("CST328", (uint8_t)addr.address);
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
             case LTR553ALS_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
@@ -528,8 +539,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
-                if (registerValue == 0x5a) {
+                // Do we have the MLX90614 or the MPR121KB or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
+                if (registerValue == 0xAB) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {

src/graphics/Screen.cpp

@@ -324,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && defined(USE_ST7789)
+#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
 SPIClass SPI1(HSPI);
 #endif
 
@@ -356,7 +356,18 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
+#elif defined(USE_ST7796)
+#ifdef ESP_PLATFORM
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
+                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
+#else
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
+#endif
+#if defined(USE_ST7789)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#elif defined(USE_ST7796)
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -474,6 +485,15 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
+#endif
+#ifdef USE_ST7796
+            ui->init();
+#ifdef ESP_PLATFORM
+            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
+#else
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
+#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -512,6 +532,21 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
+#ifdef USE_ST7796
+            SPI1.end();
+#if defined(ARCH_ESP32)
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, LOW);
+            pinMode(ST7796_RESET, ANALOG);
+            pinMode(ST7796_RS, ANALOG);
+            pinMode(ST7796_NSS, ANALOG);
+#else
+            nrf_gpio_cfg_default(VTFT_LEDA);
+            nrf_gpio_cfg_default(ST7796_RESET);
+            nrf_gpio_cfg_default(ST7796_RS);
+            nrf_gpio_cfg_default(ST7796_NSS);
+#endif
+#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -557,6 +592,10 @@ void Screen::setup()
 #if defined(MUZI_BASE)
     dispdev->delayPoweron = true;
 #endif
+#if defined(USE_ST7796) && defined(TFT_MESH)
+    // Custom text color, if defined in variant.h
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -620,6 +659,8 @@ void Screen::setup()
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
+#elif defined(USE_ST7796)
+        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -652,7 +693,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();

src/graphics/Screen.h

@@ -83,6 +83,8 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
+#elif defined(USE_ST7796)
+#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>

src/graphics/ScreenFonts.h

@@ -73,7 +73,7 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/VirtualKeyboard.cpp

@@ -506,6 +506,9 @@ void VirtualKeyboard::drawKey(OLEDDisplay *display, const VirtualKey &key, bool
             centeredTextY -= 1;
         }
     }
+#ifdef MUZI_BASE // Correct issue with character vertical position on MUZI_BASE
+    centeredTextY -= 2;
+#endif
     display->drawString(textX, centeredTextY, keyText.c_str());
 }
 

src/graphics/draw/DebugRenderer.cpp

@@ -97,7 +97,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(USE_ST7796) ||            \
+     ARCH_PORTDUINO) &&                                                                                                                                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -109,7 +110,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -125,7 +126,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(USE_ST7796) ||            \
+     ARCH_PORTDUINO) &&                                                                                                                                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);

src/graphics/draw/UIRenderer.cpp

@@ -257,7 +257,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {

src/graphics/images.h

@@ -27,8 +27,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(USE_ST7796) || defined(ST7796_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/niche/InkHUD/AppletFont.cpp

@@ -124,7 +124,7 @@ uint32_t InkHUD::AppletFont::toUtf32(std::string utf8)
         utf32 |= (utf8.at(3) & 0b00111111);
         break;
     default:
-        assert(false);
+        return 0;
     }
 
     return utf32;

src/main.cpp

@@ -877,7 +877,7 @@ void setup()
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) ||              \
     defined(USE_SPISSD1306)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
@@ -1154,7 +1154,7 @@ void setup()
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) ||              \
     defined(USE_SPISSD1306)
     if (screen)
         screen->setup();

src/mesh/NodeDB.cpp

@@ -664,7 +664,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.bluetooth.fixed_pin = defaultBLEPin;
 
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
-    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306)
+    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) || defined(USE_ST7796)
     bool hasScreen = true;
 #ifdef HELTEC_MESH_NODE_T114
     uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);

src/mesh/generated/meshtastic/mesh.pb.h

@@ -237,8 +237,8 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_T_ETH_ELITE = 91,
     /* Heltec HRI-3621 industrial probe */
     meshtastic_HardwareModel_HELTEC_SENSOR_HUB = 92,
-    /* Reserved Fried Chicken ID for future use */
-    meshtastic_HardwareModel_RESERVED_FRIED_CHICKEN = 93,
+    /* Muzi Works Muzi-Base device */
+    meshtastic_HardwareModel_MUZI_BASE = 93,
     /* Heltec Magnetic Power Bank with Meshtastic compatible */
     meshtastic_HardwareModel_HELTEC_MESH_POCKET = 94,
     /* Seeed Solar Node */

src/modules/CannedMessageModule.cpp

@@ -836,6 +836,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() > 0) {
         payload = 0x08;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -844,6 +845,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_LEFT) {
         payload = INPUT_BROKER_LEFT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -851,6 +853,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_RIGHT) {
         payload = INPUT_BROKER_RIGHT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }

src/platform/extra_variants/tbeam_displayshield/variant.cpp

@@ -0,0 +1,43 @@
+#include "configuration.h"
+
+#ifdef HAS_CST226SE
+
+#include "TouchDrvCSTXXX.hpp"
+#include "input/TouchScreenImpl1.h"
+#include <Wire.h>
+
+TouchDrvCSTXXX tsPanel;
+static constexpr uint8_t PossibleAddresses[2] = {CST328_ADDR, CST226SE_ADDR_ALT};
+uint8_t i2cAddress = 0;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    int16_t x_array[1], y_array[1];
+    uint8_t touched = tsPanel.getPoint(x_array, y_array, 1);
+    if (touched > 0) {
+        *y = x_array[0];
+        *x = (TFT_WIDTH - y_array[0]);
+        // Check bounds
+        if (*x < 0 || *x >= TFT_WIDTH || *y < 0 || *y >= TFT_HEIGHT) {
+            return false;
+        }
+        return true; // Valid touch detected
+    }
+    return false; // No valid touch data
+}
+
+void lateInitVariant()
+{
+    tsPanel.setTouchDrvModel(TouchDrv_CST226);
+    for (uint8_t addr : PossibleAddresses) {
+        if (tsPanel.begin(Wire, addr, I2C_SDA, I2C_SCL)) {
+            i2cAddress = addr;
+            LOG_DEBUG("CST226SE init OK at address 0x%02X", addr);
+            touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
+            touchScreenImpl1->init();
+            return;
+        }
+    }
+    LOG_ERROR("CST226SE init failed at all known addresses");
+}
+#endif

src/platform/nrf52/architecture.h

@@ -109,7 +109,7 @@
 #elif defined(HELTEC_MESH_SOLAR)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_SOLAR
 #elif defined(MUZI_BASE)
-#define HW_VENDOR meshtastic_HardwareModel_RESERVED_FRIED_CHICKEN
+#define HW_VENDOR meshtastic_HardwareModel_MUZI_BASE
 #else
 #define HW_VENDOR meshtastic_HardwareModel_NRF52_UNKNOWN
 #endif

variants/esp32/tbeam/platformio.ini

@@ -4,12 +4,22 @@ extends = esp32_base
 board = ttgo-t-beam
 board_level = pr
 board_check = true
-lib_deps =
-  ${esp32_base.lib_deps}
-build_flags = 
-  ${esp32_base.build_flags}
+lib_deps = ${esp32_base.lib_deps}
+build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
   -I variants/esp32/tbeam
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
 upload_speed = 921600
+
+[env:tbeam-displayshield]
+extends = env:tbeam
+
+build_flags =
+  ${env:tbeam.build_flags}
+  -D USE_ST7796
+
+lib_deps =
+  ${env:tbeam.lib_deps}
+  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
+  lewisxhe/SensorLib@0.3.1 ; touchscreen addon

variants/esp32/tbeam/variant.h

@@ -42,4 +42,35 @@
 #define GPS_UBLOX
 #define GPS_RX_PIN 34
 #define GPS_TX_PIN 12
-// #define GPS_DEBUG
+// #define GPS_DEBUG
+
+// Used when the display shield is chosen
+#ifdef USE_ST7796
+
+#undef EXT_NOTIFY_OUT
+#undef LED_STATE_ON
+#undef LED_PIN
+
+#define HAS_CST226SE 1
+#define HAS_TOUCHSCREEN 1
+// #define TOUCH_IRQ 35 // broken in this version of the lib 0.3.1
+#ifndef TOUCH_IRQ
+#define TOUCH_IRQ -1
+#endif
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define USE_VIRTUAL_KEYBOARD 1
+
+#define ST7796_NSS 25
+#define ST7796_RS 13  // DC
+#define ST7796_SDA 14 // MOSI
+#define ST7796_SCK 15
+#define ST7796_RESET 2
+#define ST7796_MISO -1
+#define ST7796_BUSY -1
+#define VTFT_LEDA 4
+#define TFT_SPI_FREQUENCY 60000000
+#define TFT_HEIGHT 222
+#define TFT_WIDTH 480
+#define BRIGHTNESS_DEFAULT 100        // Medium Low Brightness
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#endif

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -13,7 +13,10 @@ build_flags =
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
   -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
-  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
+  -DEINK_LIMIT_FASTREFRESH=20          ; How many consecutive fast-refreshes are permitted    //20
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates          //30
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
 
 lib_deps =
   ${esp32s3_base.lib_deps}

variants/nrf52840/ELECROW-ThinkNode-M1/variant.h

@@ -62,17 +62,11 @@ extern "C" {
 /*
  * Buttons
  */
-#define PIN_BUTTON2 (32 + 10)
+#define PIN_BUTTON1 (32 + 10)
+#define PIN_BUTTON2 (32 + 7)
 #define ALT_BUTTON_PIN PIN_BUTTON2
 #define ALT_BUTTON_ACTIVE_LOW true
 #define ALT_BUTTON_ACTIVE_PULLUP true
-#define PIN_BUTTON1 (32 + 7)
-
-// #define PIN_BUTTON1 (0 + 11)
-// #define PIN_BUTTON1 (32 + 7)
-
-// #define BUTTON_CLICK_MS 400
-// #define BUTTON_TOUCH_MS 200
 
 /*
  * Analog pins
@@ -203,4 +197,4 @@ External serial flash WP25R1635FZUIL0
 }
 #endif
 
-#endif
+#endif

variants/nrf52840/rak4631/platformio.ini

@@ -4,16 +4,33 @@ extends = nrf52840_base
 board = wiscore_rak4631
 board_level = pr
 board_check = true
+build_type = release
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/rak4631
   -D RAK_4631
   -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
   -DEINK_WIDTH=250
-  -DEINK_HEIGHT=122
+  -DEINK_HEIGHT=122 
   -DRADIOLIB_EXCLUDE_SX128X=1
   -DRADIOLIB_EXCLUDE_SX127X=1
   -DRADIOLIB_EXCLUDE_LR11X0=1
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+  -Os
+  -Wl,-Map=$BUILD_DIR/output.map
+build_unflags =
+  -Ofast
+  -Og
+  -ggdb3
+  -ggdb2
+  -g3
+  -g2
+  -g
+  -g1
+  -g0
+build_src_filter = ${nrf52_base.build_src_filter} \
+  +<../variants/nrf52840/rak4631> \
+  +<mesh/eth/> \
+  +<mesh/api/> \
+  +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${nrf52_networking_base.lib_deps}