Upgrade trunk

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.trunk/trunk.yaml

@@ -9,14 +9,14 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.497
-    - renovate@42.81.8
+    - renovate@42.84.2
     - prettier@3.8.0
-    - trufflehog@3.92.4
+    - trufflehog@3.92.5
     - yamllint@1.38.0
-    - bandit@1.9.2
+    - bandit@1.9.3
     - trivy@0.68.2
     - taplo@0.10.0
-    - ruff@0.14.11
+    - ruff@0.14.13
     - isort@7.0.0
     - markdownlint@0.47.0
     - oxipng@10.0.0
@@ -26,7 +26,7 @@ lint:
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.12.0
+    - black@26.1.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware

debian/control

@@ -25,8 +25,7 @@ Build-Depends: debhelper-compat (= 13),
                liborcania-dev,
                libx11-dev,
                libinput-dev,
-               libxkbcommon-x11-dev,
-               libsqlite3-dev
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

meshtasticd.spec.rpkg

@@ -39,7 +39,6 @@ BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
 BuildRequires: pkgconfig(libuv)
-BuildRequires: pkgconfig(sqlite3)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/5a870c623a4e9ab7a7abe3d02950536f107d1a31.zip
+	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/main.cpp

@@ -105,6 +105,43 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #include <string>
 #endif
 
+#ifdef ARCH_ESP32
+#ifdef DEBUG_PARTITION_TABLE
+#include "esp_partition.h"
+
+void printPartitionTable()
+{
+    printf("\n--- Partition Table ---\n");
+    // Print Column Headers
+    printf("| %-16s | %-4s | %-7s | %-10s | %-10s |\n", "Label", "Type", "Subtype", "Offset", "Size");
+    printf("|------------------|------|---------|------------|------------|\n");
+
+    // Create an iterator to find ALL partitions (Type ANY, Subtype ANY)
+    esp_partition_iterator_t it = esp_partition_find(ESP_PARTITION_TYPE_ANY, ESP_PARTITION_SUBTYPE_ANY, NULL);
+
+    // Loop through the iterator
+    if (it != NULL) {
+        do {
+            const esp_partition_t *part = esp_partition_get(it);
+
+            // Print details: Label, Type (Hex), Subtype (Hex), Offset (Hex), Size (Hex)
+            printf("| %-16s | 0x%02x | 0x%02x    | 0x%08x | 0x%08x |\n", part->label, part->type, part->subtype, part->address,
+                   part->size);
+
+            // Move to next partition
+            it = esp_partition_next(it);
+        } while (it != NULL);
+
+        // Release the iterator memory
+        esp_partition_iterator_release(it);
+    } else {
+        printf("No partitions found.\n");
+    }
+    printf("-----------------------\n");
+}
+#endif // DEBUG_PARTITION_TABLE
+#endif // ARCH_ESP32
+
 #if HAS_BUTTON || defined(ARCH_PORTDUINO)
 #include "input/ButtonThread.h"
 
@@ -648,7 +685,11 @@ void setup()
         sensor_detected = true;
 #endif
     }
-
+#ifdef ARCH_ESP32
+#ifdef DEBUG_PARTITION_TABLE
+    printPartitionTable();
+#endif
+#endif // ARCH_ESP32
 #ifdef ARCH_ESP32
     // Don't init display if we don't have one or we are waking headless due to a timer event
     if (wakeCause == ESP_SLEEP_WAKEUP_TIMER) {

src/mesh/NodeDB.cpp

@@ -1410,14 +1410,6 @@ void NodeDB::loadFromDisk()
     if (portduino_config.has_configDisplayMode) {
         config.display.displaymode = (_meshtastic_Config_DisplayConfig_DisplayMode)portduino_config.configDisplayMode;
     }
-    if (portduino_config.has_statusMessage) {
-        moduleConfig.has_statusmessage = true;
-        strncpy(moduleConfig.statusmessage.node_status, portduino_config.statusMessage.c_str(), sizeof(moduleConfig.statusmessage.node_status));
-        moduleConfig.statusmessage.node_status[sizeof(moduleConfig.statusmessage.node_status) - 1] = '\0';
-    }
-    if (portduino_config.enable_UDP) {
-        config.network.enabled_protocols = true;
-    }
 
 #endif
 }
@@ -1518,7 +1510,6 @@ bool NodeDB::saveToDiskNoRetry(int saveWhat)
         moduleConfig.has_ambient_lighting = true;
         moduleConfig.has_audio = true;
         moduleConfig.has_paxcounter = true;
-        moduleConfig.has_statusmessage = true;
 
         success &=
             saveProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, &meshtastic_LocalModuleConfig_msg, &moduleConfig);

src/mesh/http/ContentHandler.cpp

@@ -173,7 +173,7 @@ void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res)
 
     if (req->getMethod() == "OPTIONS") {
         res->setStatusCode(204); // Success with no content
-        res->print("");
+        // res->print(""); @todo remove
         return;
     }
 
@@ -223,7 +223,7 @@ void handleAPIv1ToRadio(HTTPRequest *req, HTTPResponse *res)
 
     if (req->getMethod() == "OPTIONS") {
         res->setStatusCode(204); // Success with no content
-        res->print("");
+        // res->print(""); @todo remove
         return;
     }
 

src/modules/AdminModule.cpp

@@ -235,22 +235,46 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     }
     case meshtastic_AdminMessage_ota_request_tag: {
 #if defined(ARCH_ESP32)
+        LOG_INFO("OTA Requested");
+
         if (r->ota_request.ota_hash.size != 32) {
             suppressRebootBanner = true;
-            LOG_INFO("OTA Failed: Invalid `ota_hash` provided");
+            sendWarningAndLog("Cannot start OTA: Invalid `ota_hash` provided.");
             break;
         }
 
         meshtastic_OTAMode mode = r->ota_request.reboot_ota_mode;
+        const char *mode_name = (mode == METHOD_OTA_BLE ? "BLE" : "WiFi");
+
+        // Check that we have an OTA partition
+        const esp_partition_t *part = MeshtasticOTA::getAppPartition();
+        if (part == NULL) {
+            suppressRebootBanner = true;
+            sendWarningAndLog("Cannot start OTA: Cannot find OTA Loader partition.");
+            break;
+        }
+
+        static esp_app_desc_t app_desc;
+        if (!MeshtasticOTA::getAppDesc(part, &app_desc)) {
+            suppressRebootBanner = true;
+            sendWarningAndLog("Cannot start OTA: Device does have a valid OTA Loader.");
+            break;
+        }
+
+        if (!MeshtasticOTA::checkOTACapability(&app_desc, mode)) {
+            suppressRebootBanner = true;
+            sendWarningAndLog("OTA Loader does not support %s", mode_name);
+            break;
+        }
+
         if (MeshtasticOTA::trySwitchToOTA()) {
-            LOG_INFO("OTA Requested");
             suppressRebootBanner = true;
             if (screen)
                 screen->startFirmwareUpdateScreen();
             MeshtasticOTA::saveConfig(&config.network, mode, r->ota_request.ota_hash.bytes);
-            LOG_INFO("Rebooting to WiFi OTA");
+            sendWarningAndLog("Rebooting to %s OTA", mode_name);
         } else {
-            LOG_INFO("WIFI OTA Failed");
+            sendWarningAndLog("Unable to switch to the OTA partition.");
         }
 #endif
         int s = 1; // Reboot in 1 second, hard coded
@@ -976,11 +1000,6 @@ bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.has_paxcounter = true;
         moduleConfig.paxcounter = c.payload_variant.paxcounter;
         break;
-    case meshtastic_ModuleConfig_statusmessage_tag:
-        LOG_INFO("Set module config: StatusMessage");
-        moduleConfig.has_statusmessage = true;
-        moduleConfig.statusmessage = c.payload_variant.statusmessage;
-        break;
     }
     saveChanges(SEGMENT_MODULECONFIG);
     return true;
@@ -1161,11 +1180,6 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
-        case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
-            LOG_INFO("Get module config: StatusMessage");
-            res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
-            res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
-            break;
         }
 
         // NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.
@@ -1482,15 +1496,43 @@ void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent
 #endif
 }
 
-void AdminModule::sendWarning(const char *message)
+void AdminModule::sendWarning(const char *format, ...)
 {
     meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+    if (!cn)
+        return;
+
     cn->level = meshtastic_LogRecord_Level_WARNING;
     cn->time = getValidTime(RTCQualityFromNet);
-    strncpy(cn->message, message, sizeof(cn->message));
+
+    va_list args;
+    va_start(args, format);
+    // Format the arguments directly into the notification object
+    vsnprintf(cn->message, sizeof(cn->message), format, args);
+    va_end(args);
+
     service->sendClientNotification(cn);
 }
 
+void AdminModule::sendWarningAndLog(const char *format, ...)
+{
+    // We need a temporary buffer to hold the formatted text so we can log it
+    // Using 250 bytes as a safe upper limit for typical text notifications
+    char buf[250];
+
+    va_list args;
+    va_start(args, format);
+    vsnprintf(buf, sizeof(buf), format, args);
+    va_end(args);
+
+    LOG_WARN(buf);
+    // 2. Call sendWarning
+    // SECURITY NOTE: We pass "%s", buf instead of just 'buf'.
+    // If 'buf' contained a % symbol (e.g. "Battery 50%"), passing it directly
+    // would crash sendWarning. "%s" treats it purely as text.
+    sendWarning("%s", buf);
+}
+
 void disableBluetooth()
 {
 #if HAS_BLUETOOTH

src/modules/AdminModule.h

@@ -1,7 +1,9 @@
-#include <sys/types.h>
-
 #pragma once
+#ifdef ESP_PLATFORM
+#include <esp_ota_ops.h>
+#endif
 #include "ProtobufModule.h"
+#include <sys/types.h>
 #if HAS_WIFI
 #include "mesh/wifi/WiFiAPClient.h"
 #endif
@@ -71,7 +73,8 @@ class AdminModule : public ProtobufModule<meshtastic_AdminMessage>, public Obser
 
     bool messageIsResponse(const meshtastic_AdminMessage *r);
     bool messageIsRequest(const meshtastic_AdminMessage *r);
-    void sendWarning(const char *message);
+    void sendWarning(const char *format, ...) __attribute__((format(printf, 2, 3)));
+    void sendWarningAndLog(const char *format, ...) __attribute__((format(printf, 2, 3)));
 };
 
 static constexpr const char *licensedModeMessage =

src/modules/Modules.cpp

@@ -108,9 +108,6 @@
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
 #endif
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "modules/StatusMessageModule.h"
-#endif
 
 /**
  * Create module instances here.  If you are adding a new module, you must 'new' it here (or somewhere else)
@@ -168,9 +165,6 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_DROPZONE
     dropzoneModule = new DropzoneModule();
 #endif
-#if !MESHTASTIC_EXCLUDE_STATUS
-    statusMessageModule = new StatusMessageModule();
-#endif
 #if !MESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE
     new GenericThreadModule();
 #endif

src/modules/StatusLEDModule.cpp

@@ -50,9 +50,10 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
             break;
         }
         case meshtastic::BluetoothStatus::ConnectionState::CONNECTED: {
-            ble_state = connected;
-            PAIRING_LED_starttime = millis();
-            break;
+            if (ble_state != connected) {
+                ble_state = connected;
+                PAIRING_LED_starttime = millis();
+            }
         }
         }
 

src/modules/StatusMessageModule.cpp

@@ -1,47 +0,0 @@
-#if !MESHTASTIC_EXCLUDE_STATUS
-
-#include "StatusMessageModule.h"
-#include "ProtobufModule.h"
-#include "MeshService.h"
-
-
-StatusMessageModule *statusMessageModule;
-
-int32_t StatusMessageModule::runOnce()
-{
-    if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
-        // create and send message with the status message set
-        meshtastic_StatusMessage ourStatus = meshtastic_StatusMessage_init_zero;
-        strncpy(ourStatus.status, moduleConfig.statusmessage.node_status, sizeof(ourStatus.status));
-        ourStatus.status[sizeof(ourStatus.status) - 1] = '\0'; // ensure null termination
-        meshtastic_MeshPacket *p = allocDataPacket();
-        p->decoded.payload.size =
-            pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes), meshtastic_StatusMessage_fields, &ourStatus);
-        p->to = NODENUM_BROADCAST;
-        p->decoded.want_response = false;
-        p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
-        p->channel = 0;
-        service->sendToMesh(p);
-
-        
-    }
-
-    return 1000 * 12 * 60 * 60;
-}
-
-ProcessMessage StatusMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
-{
-    if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-                meshtastic_StatusMessage incomingMessage;
-        if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, meshtastic_StatusMessage_fields,
-                                 &incomingMessage)) {
-            LOG_INFO("Received a NodeStatus message %s", incomingMessage.status);
-        }
-
-    }
-    return ProcessMessage::CONTINUE;
-}
-
-
-
-#endif

src/modules/StatusMessageModule.h

@@ -1,34 +0,0 @@
-#pragma once
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "SinglePortModule.h"
-#include "configuration.h"
-
-
-
-class StatusMessageModule : public SinglePortModule, private concurrency::OSThread
-{
-
-  public:
-    /** Constructor
-     * name is for debugging output
-     */
-    StatusMessageModule() : SinglePortModule("statusMessage", meshtastic_PortNum_NODE_STATUS_APP), concurrency::OSThread("StatusMessage")
-    {
-      if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
-        this->setInterval(2 * 60 * 1000);
-      }
-      // TODO: If we have a string, set the initial delay (15 minutes maybe)
-    }
-
-    virtual int32_t runOnce() override;
-
-  protected:
-    /** Called to handle a particular incoming message
-     */
-    virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
-
-  private:
-};
-
-extern StatusMessageModule *statusMessageModule;
-#endif

src/platform/esp32/MeshtasticOTA.cpp

@@ -1,13 +1,17 @@
 #include "MeshtasticOTA.h"
 #include "configuration.h"
+#ifdef ESP_PLATFORM
 #include <Preferences.h>
 #include <esp_ota_ops.h>
+#endif
 
 namespace MeshtasticOTA
 {
 
 static const char *nvsNamespace = "MeshtasticOTA";
-static const char *appProjectName = "MeshtasticOTA";
+static const char *combinedAppProjectName = "MeshtasticOTA";
+static const char *bleOnlyAppProjectName = "MeshtasticOTA-BLE";
+static const char *wifiOnlyAppProjectName = "MeshtasticOTA-WiFi";
 
 static bool updated = false;
 
@@ -68,21 +72,44 @@ bool getAppDesc(const esp_partition_t *part, esp_app_desc_t *app_desc)
         LOG_INFO("esp_ota_get_partition_description failed");
         return false;
     }
-    if (strcmp(app_desc->project_name, appProjectName) != 0) {
-        LOG_INFO("app_desc->project_name == 0");
-        return false;
-    }
     return true;
 }
 
+bool checkOTACapability(esp_app_desc_t *app_desc, uint8_t method)
+{
+    // Combined loader supports all (both) transports, BLE and WiFi
+    if (strcmp(app_desc->project_name, combinedAppProjectName) == 0) {
+        LOG_INFO("OTA partition contains combined BLE/WiFi OTA Loader");
+        return true;
+    }
+    if (method == METHOD_OTA_BLE && strcmp(app_desc->project_name, bleOnlyAppProjectName) == 0) {
+        LOG_INFO("OTA partition contains BLE-only OTA Loader");
+        return true;
+    }
+    if (method == METHOD_OTA_WIFI && strcmp(app_desc->project_name, wifiOnlyAppProjectName) == 0) {
+        LOG_INFO("OTA partition contains WiFi-only OTA Loader");
+        return true;
+    }
+    LOG_INFO("OTA partition does not contain a known OTA loader");
+    return false;
+}
+
 bool trySwitchToOTA()
 {
     const esp_partition_t *part = getAppPartition();
-    esp_app_desc_t app_desc;
-    if (!getAppDesc(part, &app_desc))
+
+    if (part == NULL) {
+        LOG_WARN("Unable to get app partition in preparation of OTA reboot");
         return false;
-    if (esp_ota_set_boot_partition(part) != ESP_OK)
+    }
+
+    uint8_t result = esp_ota_set_boot_partition(part);
+    // Partition and app checks should now be done in the AdminModule before this is called
+    if (result != ESP_OK) {
+        LOG_WARN("Unable to switch to OTA partiton.  (Reason %d)", result);
         return false;
+    }
+
     return true;
 }
 

src/platform/esp32/MeshtasticOTA.h

@@ -3,12 +3,20 @@
 
 #include "mesh-pb-constants.h"
 #include <Arduino.h>
+#ifdef ESP_PLATFORM
+#include <esp_ota_ops.h>
+#endif
+
+#define METHOD_OTA_BLE 1
+#define METHOD_OTA_WIFI 2
 
 namespace MeshtasticOTA
 {
 void initialize();
 bool isUpdated();
-
+const esp_partition_t *getAppPartition();
+bool getAppDesc(const esp_partition_t *part, esp_app_desc_t *app_desc);
+bool checkOTACapability(esp_app_desc_t *app_desc, uint8_t method);
 void recoverConfig(meshtastic_Config_NetworkConfig *network);
 void saveConfig(meshtastic_Config_NetworkConfig *network, meshtastic_OTAMode method, uint8_t *ota_hash);
 bool trySwitchToOTA();

src/platform/portduino/PortduinoGlue.cpp

@@ -55,7 +55,6 @@ void cpuDeepSleep(uint32_t msecs)
 void updateBatteryLevel(uint8_t level) NOT_IMPLEMENTED("updateBatteryLevel");
 
 int TCPPort = SERVER_API_DEFAULT_PORT;
-bool checkConfigPort = true;
 
 static error_t parse_opt(int key, char *arg, struct argp_state *state)
 {
@@ -64,7 +63,6 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
         if (sscanf(arg, "%d", &TCPPort) < 1)
             return ARGP_ERR_UNKNOWN;
         else
-            checkConfigPort = false;
             printf("Using config file %d\n", TCPPort);
         break;
     case 'c':
@@ -847,7 +845,6 @@ bool loadConfig(const char *configPath)
         }
 
         if (yamlConfig["Config"]) {
-            portduino_config.has_config_overrides = true;
             if (yamlConfig["Config"]["DisplayMode"]) {
                 portduino_config.has_configDisplayMode = true;
                 if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "TWOCOLOR") {
@@ -860,13 +857,6 @@ bool loadConfig(const char *configPath)
                     portduino_config.configDisplayMode = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
                 }
             }
-            if (yamlConfig["Config"]["StatusMessage"]) {
-                portduino_config.has_statusMessage = true;
-                portduino_config.statusMessage = (yamlConfig["Config"]["StatusMessage"]).as<std::string>("");
-            }
-            if ((yamlConfig["Config"]["EnableUDP"]).as<bool>(false)) {
-                portduino_config.enable_UDP = true;
-            }
         }
 
         if (yamlConfig["General"]) {
@@ -880,14 +870,6 @@ bool loadConfig(const char *configPath)
                 std::cout << "Cannot set both MACAddress and MACAddressSource!" << std::endl;
                 exit(EXIT_FAILURE);
             }
-            if (checkConfigPort) {
-                portduino_config.api_port = (yamlConfig["General"]["APIPort"]).as<int>(-1);
-                if (portduino_config.api_port != -1 &&
-                portduino_config.api_port > 1023 &&
-                portduino_config.api_port < 65536) {
-                TCPPort = (portduino_config.api_port);
-                }
-            }
             portduino_config.mac_address = (yamlConfig["General"]["MACAddress"]).as<std::string>("");
             if (portduino_config.mac_address != "") {
                 portduino_config.mac_address_explicit = true;

src/platform/portduino/PortduinoGlue.h

@@ -168,18 +168,13 @@ extern struct portduino_config_struct {
     int hostMetrics_channel = 0;
 
     // config
-    bool has_config_overrides = false;
     int configDisplayMode = 0;
     bool has_configDisplayMode = false;
-    std::string statusMessage = "";
-    bool has_statusMessage = false;
-    bool enable_UDP = false;
 
     // General
     std::string mac_address = "";
     bool mac_address_explicit = false;
     std::string mac_address_source = "";
-    int api_port = -1;
     std::string config_directory = "";
     std::string available_directory = "/etc/meshtasticd/available.d/";
     int maxtophone = 100;
@@ -489,32 +484,21 @@ extern struct portduino_config_struct {
         }
 
         // config
-        if (has_config_overrides) {
+        if (has_configDisplayMode) {
             out << YAML::Key << "Config" << YAML::Value << YAML::BeginMap;
-            if (has_configDisplayMode) {
-
-                switch (configDisplayMode) {
-                case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
-                    out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
-                    break;
-                case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
-                    out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
-                    break;
-                case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
-                    out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
-                    break;
-                case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
-                    out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
-                    break;
-                }
-            }
-            if (has_statusMessage) {
-                out << YAML::Key << "StatusMessage" << YAML::Value << statusMessage;
-
-            }
-            if (enable_UDP) {
-                out << YAML::Key << "EnableUDP" << YAML::Value << true;
-
+            switch (configDisplayMode) {
+            case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
+                out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
+                break;
+            case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
+                out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
+                break;
+            case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
+                out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
+                break;
+            case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
+                out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
+                break;
             }
 
             out << YAML::EndMap; // Config
@@ -524,8 +508,6 @@ extern struct portduino_config_struct {
         out << YAML::Key << "General" << YAML::Value << YAML::BeginMap;
         if (config_directory != "")
             out << YAML::Key << "ConfigDirectory" << YAML::Value << config_directory;
-        if (api_port != -1)
-            out << YAML::Key << "TCPPort" << YAML::Value << api_port;
         if (mac_address_explicit)
             out << YAML::Key << "MACAddress" << YAML::Value << mac_address;
         if (mac_address_source != "")
@@ -537,4 +519,4 @@ extern struct portduino_config_struct {
         out << YAML::EndMap; // General
         return out.c_str();
     }
-} portduino_config;
+} portduino_config;

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -10,6 +10,8 @@ custom_meshtastic_tags = M5Stack
 
 extends = esp32c6_base
 board = esp32-c6-devkitc-1
+board_upload.flash_size = 16MB
+board_build.partitions = default_16MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
 ;Normal method