add presets to onscreen menu for easy testing.

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v6
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_firmware.yml

@@ -22,7 +22,7 @@ jobs:
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_one_arch.yml

@@ -0,0 +1,176 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,6 +15,7 @@ on:
           - rp2040
           - rp2350
           - stm32
+          - native
       target:
         type: string
         required: false
@@ -41,9 +42,10 @@ jobs:
           - rp2040
           - rp2350
           - stm32
+
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -58,13 +60,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -85,6 +87,25 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
   gather-artifacts:
     permissions:
       contents: write
@@ -93,7 +114,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +81,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -163,7 +163,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -242,7 +242,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -311,7 +311,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -366,7 +366,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,7 +142,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -221,7 +221,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -290,7 +290,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -345,7 +345,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 

.github/workflows/release_channels.yml

@@ -60,10 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          # Always use master branch for version bumps
-          ref: master
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.3.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.4
+      ref: v1.7.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
-    - renovate@42.27.1
-    - prettier@3.7.3
-    - trufflehog@3.91.1
+    - checkov@3.2.489
+    - renovate@41.169.1
+    - prettier@3.6.2
+    - trufflehog@3.90.12
     - yamllint@1.37.1
-    - bandit@1.9.2
+    - bandit@1.8.6
     - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.7
+    - ruff@0.14.3
     - isort@7.0.0
-    - markdownlint@0.46.0
+    - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.9
+    - actionlint@1.7.8
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.11.0
+    - black@25.9.0
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.28.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

arch/esp32/esp32.ini

@@ -57,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.1
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -7,13 +7,13 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
-build_type = release
+build_type = debug
 build_flags =
-  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -21,17 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -Os
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.4.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip

bin/analyze_map.py

@@ -1,165 +0,0 @@
-#!/usr/bin/env python3
-"""Summarise linker map output to highlight heavy object files and libraries.
-
-Usage:
-    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
-
-The script parses GNU ld map files and aggregates section sizes per object file
-and per archive/library, then prints sortable tables that make it easy to spot
-modules worth trimming or hiding behind feature flags.
-"""
-from __future__ import annotations
-
-import argparse
-import collections
-import os
-import re
-import sys
-from typing import DefaultDict, Dict, Tuple
-
-
-SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
-ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
-
-
-def human_size(num_bytes: int) -> str:
-    """Return a friendly size string with one decimal place."""
-    if num_bytes < 1024:
-        return f"{num_bytes:,} B"
-    num = float(num_bytes)
-    for unit in ("KB", "MB", "GB"):
-        num /= 1024.0
-        if num < 1024.0:
-            return f"{num:.1f} {unit}"
-    return f"{num:.1f} TB"
-
-
-def shorten_path(path: str, root: str) -> str:
-    """Prefer repository-relative paths for readability."""
-    path = path.strip()
-    if not path:
-        return path
-
-    # Normalise Windows archives (backslashes) to POSIX style for consistency.
-    path = path.replace("\\", "/")
-
-    # Attempt to strip the root when an absolute path lives inside the repo.
-    if os.path.isabs(path):
-        try:
-            rel = os.path.relpath(path, root)
-            if not rel.startswith(".."):
-                return rel
-        except ValueError:
-            # relpath can fail on mixed drives on Windows; fall back to basename.
-            pass
-    return path
-
-
-def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
-    """Return a human friendly object label and the library it belongs to."""
-    raw_object = raw_object.strip()
-    lib_label = "[app]"
-    match = ARCHIVE_MEMBER_RE.match(raw_object)
-    if match:
-        archive = shorten_path(match.group("archive"), root)
-        obj = match.group("object")
-        lib_label = os.path.basename(archive) or archive
-        label = f"{archive}:{obj}"
-    else:
-        label = shorten_path(raw_object, root)
-        # If the object lives under libs, hint at the containing directory.
-        parent = os.path.basename(os.path.dirname(label))
-        if parent:
-            lib_label = parent
-    return label, lib_label
-
-
-def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
-    per_object: DefaultDict[str, int] = collections.defaultdict(int)
-    per_library: DefaultDict[str, int] = collections.defaultdict(int)
-    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
-
-    try:
-        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
-            for line in handle:
-                match = SECTION_LINE_RE.match(line)
-                if not match:
-                    continue
-
-                section = match.group("section")
-                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
-                    continue
-
-                size = int(match.group("size"), 16)
-                if size == 0:
-                    continue
-
-                obj_token = match.group("object").strip()
-                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
-                    continue
-
-                label, lib_label = describe_object(obj_token, repo_root)
-                per_object[label] += size
-                per_library[lib_label] += size
-                per_object_sections[label][section] += size
-    except FileNotFoundError:
-        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
-
-    return per_object, per_library, per_object_sections
-
-
-def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
-    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
-    parts = []
-    for section, size in items[:limit]:
-        pct = (size / total) * 100 if total else 0
-        parts.append(f"{section} {pct:.1f}%")
-    if len(items) > limit:
-        remainder = total - sum(size for _, size in items[:limit])
-        pct = (remainder / total) * 100 if total else 0
-        parts.append(f"other {pct:.1f}%")
-    return ", ".join(parts)
-
-
-def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
-    total_bytes = sum(per_object.values())
-    if total_bytes == 0:
-        print("No section data found in map file.")
-        return
-
-    print(f"Map file: {map_path}")
-    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
-
-    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
-    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        breakdown = format_section_breakdown(per_object_sections[obj], size)
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
-        print(f"    {obj}")
-        if breakdown:
-            print(f"    sections: {breakdown}")
-    print()
-
-    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
-    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
-
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
-    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
-    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
-    args = parser.parse_args()
-
-    map_path = os.path.abspath(args.map)
-    repo_root = os.path.abspath(os.getcwd())
-
-    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
-    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
-
-
-if __name__ == "__main__":
-    main()

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.17" date="2025-11-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
-    </release>
     <release version="2.7.16" date="2025-11-19">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
     </release>

boards/ThinkNode-M3.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M3",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow nrf",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "",
-  "vendor": "ELECROW"
-}

boards/ThinkNode-M6.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m6",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M6",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode M6",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
-  "vendor": "ELECROW"
-}

boards/hackaday-communicator.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "hackaday-communicator"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 1500000
-  },
-  "url": "hackaday.com",
-  "vendor": "hackaday"
-}

boards/heltec_v4.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/muzi-base.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0xcafe"]],
-    "mcu": "nrf52840",
-    "variant": "muzi-base",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Muzi Base",
-  "url": "https://muzi.works/",
-  "vendor": "MuziWorks",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "blackmagic",
-      "cmsis-dap",
-      "mbed",
-      "stlink"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  }
-}

debian/changelog

@@ -1,16 +1,9 @@
-meshtasticd (2.7.17.0) unstable; urgency=medium
-
-  * Version 2.7.17
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 28 Nov 2025 15:11:34 +0000
-
 meshtasticd (2.7.16.0) unstable; urgency=medium
 
   * Version 2.7.16
 
  -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
 
-
 meshtasticd (2.7.15.0) unstable; urgency=medium
 
   * Version 2.7.15

meshtasticd.spec.rpkg

@@ -33,6 +33,7 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
+BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
@@ -49,13 +50,6 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
-# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
-%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
-BuildRequires: glibc-devel >= 2.38
-%else
-BuildRequires: pkgconfig(libbsd-overlay)
-%endif
-
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -5,7 +5,7 @@
 default_envs = tbeam
 
 extra_configs =
-	variants/*/*.ini
+	arch/*/*.ini
 	variants/*/*/platformio.ini
 	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -90,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -121,7 +121,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3bf332240416c5cb8c919fac2a0ec7260eb3be75.zip
+	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -169,7 +169,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.5
+	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -213,6 +213,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
+	sensirion/Sensirion Core@0.7.1
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/AudioThread.h

@@ -50,11 +50,8 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-
-        if (rtttlFile != nullptr) {
-            delete rtttlFile;
-            rtttlFile = nullptr;
-        }
+        delete rtttlFile;
+        rtttlFile = nullptr;
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -102,9 +99,9 @@ class AudioThread : public concurrency::OSThread
     };
 
     AudioGeneratorRTTTL *i2sRtttl = nullptr;
-    AudioOutputI2S *audioOut = nullptr;
+    AudioOutputI2S *audioOut;
 
-    AudioFileSourcePROGMEM *rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile;
 };
 
 #endif

src/DisplayFormatters.cpp

@@ -34,6 +34,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
+        return useShortName ? "LiteF" : "LiteFast";
+        break;
     default:
         return useShortName ? "Custom" : "Invalid";
         break;

src/Power.cpp

@@ -278,11 +278,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
-#if defined(BATTERY_CHARGING_INV)
-        // bit of trickery to show 99% up until the charge finishes
-        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
-            battery_SOC = 99;
-#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -460,8 +455,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-#elif defined(MUZI_BASE)
-        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -477,8 +470,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-#elif defined(BATTERY_CHARGING_INV)
-        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -707,18 +698,11 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
+            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
-#ifdef BATTERY_CHARGING_INV
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
+
     enabled = found;
     low_voltage_counter = 0;
 
@@ -775,8 +759,6 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -1453,7 +1435,7 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->isVbusIn(); }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging

src/PowerFSM.cpp

@@ -57,21 +57,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_POWERFSM("State: SDS");
+    LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
 static void lowBattSDSEnter()
 {
-    LOG_POWERFSM("State: Lower batt SDS");
+    LOG_DEBUG("State: Lower batt SDS");
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
 }
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_POWERFSM("State: SHUTDOWN");
+    LOG_DEBUG("State: SHUTDOWN");
     shutdownAtMsec = millis();
 }
 
@@ -81,7 +81,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_POWERFSM("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
@@ -155,12 +155,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_POWERFSM("State: lsExit");
+    LOG_INFO("Exit state: LS");
 }
 
 static void nbEnter()
 {
-    LOG_POWERFSM("State: nbEnter");
+    LOG_DEBUG("State: NB");
     if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
@@ -173,7 +173,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    LOG_POWERFSM("State: darkEnter");
     setBluetoothEnable(true);
     if (screen)
         screen->setOn(false);
@@ -181,7 +180,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_POWERFSM("State: serialEnter");
+    LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
     if (screen) {
         screen->setOn(true);
@@ -190,14 +189,13 @@ static void serialEnter()
 
 static void serialExit()
 {
-    LOG_POWERFSM("State: serialExit");
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
 }
 
 static void powerEnter()
 {
-    LOG_POWERFSM("State: powerEnter");
+    // LOG_DEBUG("State: POWER");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         LOG_INFO("Loss of power in Powered");
@@ -212,7 +210,6 @@ static void powerEnter()
 
 static void powerIdle()
 {
-    // LOG_POWERFSM("State: powerIdle"); // very chatty
     if (!isPowered()) {
         // If we got here, we are in the wrong state
         LOG_INFO("Loss of power in Powered");
@@ -222,13 +219,14 @@ static void powerIdle()
 
 static void powerExit()
 {
-    LOG_POWERFSM("State: powerExit");
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    LOG_POWERFSM("State: onEnter");
+    LOG_DEBUG("State: ON");
     if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
@@ -236,7 +234,6 @@ static void onEnter()
 
 static void onIdle()
 {
-    LOG_POWERFSM("State: onIdle");
     if (isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
@@ -245,7 +242,7 @@ static void onIdle()
 
 static void bootEnter()
 {
-    LOG_POWERFSM("State: bootEnter");
+    LOG_DEBUG("State: BOOT");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -322,6 +319,11 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
         powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -370,7 +372,7 @@ void PowerFSM_setup()
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
 
-#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

src/PowerFSM.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-#ifdef PowerFSMDebug
-#define LOG_POWERFSM(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_POWERFSM(...)
-#endif
-
 // See sw-design.md for documentation
 
 #define EVENT_PRESS 1

src/airtime.cpp

@@ -133,11 +133,12 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
 
 bool AirTime::isTxAllowedAirUtil()
 {
-    if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
-        if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
+    float effectiveDutyCycle = getEffectiveDutyCycle();
+    if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
+        if (utilizationTXPercent() < effectiveDutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100);
+            LOG_WARN("TX air util. >%f%%. Skip send", effectiveDutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
     }

src/configuration.h

@@ -36,29 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Offer chance for variant-specific defines */
 #include "variant.h"
 
-// -----------------------------------------------------------------------------
-// Display feature overrides
-// -----------------------------------------------------------------------------
-
-// Allow build environments to opt-in explicitly to the E-Ink UI stack while
-// keeping headless targets slim by default. Existing variants that already
-// define USE_EINK continue to work without additional flags.
-#ifndef MESHTASTIC_USE_EINK_UI
-#ifdef USE_EINK
-#define MESHTASTIC_USE_EINK_UI 1
-#else
-#define MESHTASTIC_USE_EINK_UI 0
-#endif
-#endif
-
-#if MESHTASTIC_USE_EINK_UI
-#ifndef USE_EINK
-#define USE_EINK
-#endif
-#else
-#undef USE_EINK
-#endif
-
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -273,9 +250,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A // same address as CST226SE
+#define CST328_ADDR 0x1A
 #define CHSC6X_ADDR 0x2E
-#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -394,9 +370,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BLUETOOTH
 #define HAS_BLUETOOTH 0
 #endif
-#ifndef USE_TFTDISPLAY
-#define USE_TFTDISPLAY 0
-#endif
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
@@ -423,13 +396,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
-#ifndef LED_STATE_OFF
-#define LED_STATE_OFF 0
-#endif
-#ifndef LED_STATE_ON
-#define LED_STATE_ON 1
-#endif
-
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -85,8 +85,7 @@ class ScanI2C
         DRV2605,
         BH1750,
         DA217,
-        CHSC6X,
-        CST226SE
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -499,18 +499,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-            case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
-                if (registerValue == 0xA9) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else {
-                    type = CST328;
-                    logFoundDevice("CST328", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
             case LTR553ALS_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
@@ -539,12 +528,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                // Do we have the MLX90614 or the MPR121KB or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
-                if (registerValue == 0xAB) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
+                if (registerValue == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -562,11 +547,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-#ifdef HAS_ICM20948
-                type = ICM20948;
-                logFoundDevice("ICM20948", (uint8_t)addr.address);
-                break;
-#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -38,16 +38,14 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#ifndef GPS_SERIAL_PORT
-#define GPS_SERIAL_PORT Serial1
-#endif
-
-#if defined(ARCH_NRF52)
-Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(GPS_SERIAL_PORT)
 HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#else
+HardwareSerial *GPS::_serial_gps = &Serial1;
+#endif
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -1527,7 +1525,10 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-
+#if HAS_GPS && !defined(ARCH_ESP32)
+    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
+    _tx_gpio = 1;
+#endif
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1601,28 +1602,16 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
-        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
-
 //  ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
+        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
+        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
-        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_NRF52)
-        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_STM32WL)
-        _serial_gps->setTx(new_gps->tx_gpio);
-        _serial_gps->setRx(new_gps->rx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_PORTDUINO)
-        // Portduino can't set the GPS pins directly.
-        _serial_gps->begin(GPS_BAUDRATE);
 #else
-#error Unsupported architecture!
+        _serial_gps->begin(GPS_BAUDRATE);
 #endif
     }
     return new_gps;

src/gps/GPS.h

@@ -194,8 +194,6 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
-#elif defined(ARCH_NRF52)
-    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,11 +112,7 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
-#ifdef MUZI_BASE
-        ArtronShop_RX8130CE rtc(&Wire1);
-#else
         ArtronShop_RX8130CE rtc(&Wire);
-#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -249,11 +245,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
-#ifdef MUZI_BASE
-            ArtronShop_RX8130CE rtc(&Wire1);
-#else
             ArtronShop_RX8130CE rtc(&Wire);
-#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,

src/graphics/Screen.cpp

@@ -69,11 +69,7 @@ using graphics::Emote;
 using graphics::emotes;
 using graphics::numEmotes;
 
-#if USE_TFTDISPLAY
 extern uint16_t TFT_MESH;
-#else
-uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
-#endif
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiAPClient.h"
@@ -328,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
+#if defined(ESP_PLATFORM) && defined(USE_ST7789)
 SPIClass SPI1(HSPI);
 #endif
 
@@ -360,13 +356,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
-#elif defined(USE_ST7796)
-#ifdef ESP_PLATFORM
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
-                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
-#else
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-#endif
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -379,7 +369,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -409,12 +399,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     isAUTOOled = true;
 #endif
 
-#if defined(USE_ST7789)
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
-#elif defined(USE_ST7796)
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
-
     ui = new OLEDDisplayUi(dispdev);
     cmdQueue.setReader(this);
 }
@@ -451,14 +435,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
-#if defined(MUZI_BASE)
-            dispdev->init();
-            dispdev->setBrightness(brightness);
-            dispdev->flipScreenVertically();
-            dispdev->resetDisplay();
-            digitalWrite(SCREEN_12V_ENABLE, HIGH);
-            delay(100);
-#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -490,15 +466,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
-#endif
-#ifdef USE_ST7796
-            ui->init();
-#ifdef ESP_PLATFORM
-            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
-#else
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
-#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -517,10 +484,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
-
-#ifdef SCREEN_12V_ENABLE
-            digitalWrite(SCREEN_12V_ENABLE, LOW);
-#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -537,21 +500,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
-#ifdef USE_ST7796
-            SPI1.end();
-#if defined(ARCH_ESP32)
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, LOW);
-            pinMode(ST7796_RESET, ANALOG);
-            pinMode(ST7796_RS, ANALOG);
-            pinMode(ST7796_NSS, ANALOG);
-#else
-            nrf_gpio_cfg_default(VTFT_LEDA);
-            nrf_gpio_cfg_default(ST7796_RESET);
-            nrf_gpio_cfg_default(ST7796_RS);
-            nrf_gpio_cfg_default(ST7796_NSS);
-#endif
-#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -586,7 +534,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
+#ifdef USE_SH1107_128_64
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -594,13 +542,6 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
-#if defined(MUZI_BASE)
-    dispdev->delayPoweron = true;
-#endif
-#if defined(USE_ST7796) && defined(TFT_MESH)
-    // Custom text color, if defined in variant.h
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -660,12 +601,10 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif defined(USE_ST7796)
-        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -698,7 +637,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -1610,7 +1549,6 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
 int Screen::handleInputEvent(const InputEvent *event)
 {
-    LOG_INPUT("Screen Input event %u! kb %u", event->inputEvent, event->kbchar);
     if (!screenOn)
         return 0;
 

src/graphics/Screen.h

@@ -83,8 +83,6 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
-#elif defined(USE_ST7796)
-#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -251,8 +249,6 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
-    bool isScreenOn() { return screenOn; }
-
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/ScreenFonts.h

@@ -73,8 +73,7 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/SharedUIDisplay.cpp

@@ -17,12 +17,6 @@ namespace graphics
 
 void determineResolution(int16_t screenheight, int16_t screenwidth)
 {
-
-#ifdef FORCE_LOW_RES
-    isHighResolution = false;
-    return;
-#endif
-
     if (screenwidth > 128) {
         isHighResolution = true;
     }
@@ -30,6 +24,11 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
     if (screenwidth > 128 && screenheight <= 64) {
         isHighResolution = false;
     }
+
+    // Special case for Heltec Wireless Tracker v1.1
+    if (screenwidth == 160 && screenheight == 80) {
+        isHighResolution = false;
+    }
 }
 
 // === Shared External State ===

src/graphics/TFTDisplay.cpp

@@ -1,6 +1,5 @@
 #include "configuration.h"
 #include "main.h"
-#if USE_TFTDISPLAY
 
 #if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -124,11 +123,6 @@ static void rak14014_tpIntHandle(void)
     _rak14014_touch_int = true;
 }
 
-#elif defined(HACKADAY_COMMUNICATOR)
-#include <Arduino_GFX_Library.h>
-Arduino_DataBus *bus = nullptr;
-Arduino_GFX *tft = nullptr;
-
 #elif defined(ST72xx_DE)
 #include <LovyanGFX.hpp>
 #include <TCA9534.h>
@@ -433,35 +427,33 @@ static LGFX *tft = nullptr;
 #include "lgfx/v1/Touch.hpp"
 namespace lgfx
 {
-inline namespace v1
-{
+ inline namespace v1
+ {
 class TOUCH_CHSC6X : public ITouch
 {
-  public:
+public:
     TOUCH_CHSC6X(void)
     {
-        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
-        _cfg.x_min = 0;
-        _cfg.x_max = 240;
-        _cfg.y_min = 0;
-        _cfg.y_max = 320;
+      _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+      _cfg.x_min = 0;
+      _cfg.x_max = 240;
+      _cfg.y_min = 0;
+      _cfg.y_max = 320;
     };
 
-    bool init(void) override
-    {
-        if (chsc6xTouch == nullptr) {
-            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
+    bool init(void) override {
+        if(chsc6xTouch==nullptr) {
+            chsc6xTouch=new chsc6x(&Wire1,TOUCH_SDA_PIN,TOUCH_SCL_PIN,TOUCH_INT_PIN,TOUCH_RST_PIN);
         }
         chsc6xTouch->chsc6x_init();
         return true;
     };
 
-    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
-    {
-        uint16_t raw_x, raw_y;
-        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
-            tp[0].x = 320 - 1 - raw_y;
-            tp[0].y = 240 - 1 - raw_x;
+    uint_fast8_t getTouchRaw(touch_point_t* tp, uint_fast8_t count) override {
+        uint16_t raw_x,raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y)==0) {
+            tp[0].x = 320-1-raw_y;
+            tp[0].y = 240-1-raw_x ;
             tp[0].size = 1;
             tp[0].id = 1;
             return 1;
@@ -470,14 +462,13 @@ class TOUCH_CHSC6X : public ITouch
         return 0;
     };
 
-    void wakeup(void) override{};
-    void sleep(void) override{};
-
+    void wakeup(void) override {};
+    void sleep(void) override {};
   private:
-    chsc6x *chsc6xTouch = nullptr;
-};
-} // namespace v1
-} // namespace lgfx
+    chsc6x *chsc6xTouch=nullptr;
+  };
+}
+}
 #endif
 class LGFX : public lgfx::LGFX_Device
 {
@@ -522,9 +513,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET;       // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY;      // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
@@ -1139,6 +1130,9 @@ static LGFX *tft = nullptr;
 
 #endif
 
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1274,15 +1268,12 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-#if defined(HACKADAY_COMMUNICATOR)
-            tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
-                                      (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
-#else
+
             // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
             // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
             tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
                           &linePixelBuffer[x_FirstPixelUpdate]);
-#endif
+
             somethingChanged = true;
         }
         y++;
@@ -1346,8 +1337,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         display(true);
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOn();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1360,8 +1349,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
-    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
+#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -1373,8 +1361,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         tft->clear();
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOff();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1387,7 +1373,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(false); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
         tft->setBrightness(0);
 #endif
         break;
@@ -1403,7 +1389,7 @@ void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
 #ifdef RAK14014
     // todo
-#elif !defined(HACKADAY_COMMUNICATOR)
+#else
     tft->setBrightness(_brightness);
     LOG_DEBUG("Brightness is set to value: %i ", _brightness);
 #endif
@@ -1421,7 +1407,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -1440,7 +1426,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -1459,12 +1445,6 @@ bool TFTDisplay::connect()
     LOG_INFO("Do TFT init");
 #ifdef RAK14014
     tft = new TFT_eSPI;
-#elif defined(HACKADAY_COMMUNICATOR)
-    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
-    tft = new Arduino_NV3007(bus, 40, 0 /* rotation */, false /* IPS */, 142 /* width */, 428 /* height */, 12 /* col offset 1 */,
-                             0 /* row offset 1 */, 14 /* col offset 2 */, 0 /* row offset 2 */, nv3007_279_init_operations,
-                             sizeof(nv3007_279_init_operations));
-
 #else
     tft = new LGFX;
 #endif
@@ -1475,15 +1455,8 @@ bool TFTDisplay::connect()
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
 #endif
-#ifdef HACKADAY_COMMUNICATOR
-    bool beginStatus = tft->begin();
-    if (beginStatus)
-        LOG_DEBUG("TFT Success!");
-    else
-        LOG_ERROR("TFT Fail!");
-#else
+
     tft->init();
-#endif
 
 #if defined(M5STACK)
     tft->setRotation(0);
@@ -1516,4 +1489,4 @@ bool TFTDisplay::connect()
     return true;
 }
 
-#endif // USE_TFTDISPLAY
+#endif

src/graphics/TimeFormatters.cpp

@@ -101,23 +101,3 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
-
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
-{
-    uint32_t days = uptimeMillis / 86400000;
-    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
-    uint32_t mins = (uptimeMillis % 3600000) / 60000;
-    uint32_t secs = (uptimeMillis % 60000) / 1000;
-
-    if (days) {
-        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
-    } else if (hours) {
-        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
-    } else if (!includeSecs) {
-        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
-    } else if (mins) {
-        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
-    } else {
-        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
-    }
-}

src/graphics/TimeFormatters.h

@@ -24,10 +24,3 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
-
-/**
- * Get a compact human-readable string that only shows the largest non-zero time components.
- * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
- * will display as "1d 2h".
- */
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/VirtualKeyboard.cpp

@@ -506,9 +506,6 @@ void VirtualKeyboard::drawKey(OLEDDisplay *display, const VirtualKey &key, bool
             centeredTextY -= 1;
         }
     }
-#ifdef MUZI_BASE // Correct issue with character vertical position on MUZI_BASE
-    centeredTextY -= 2;
-#endif
     display->drawString(textX, centeredTextY, keyText.c_str());
 }
 

src/graphics/draw/DebugRenderer.cpp

@@ -11,7 +11,6 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
-#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -97,7 +96,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -109,8 +108,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -126,7 +124,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -652,7 +650,17 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 
     if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
-        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
+        uint32_t uptime = millis() / 1000;
+        uint32_t days = uptime / 86400;
+        uint32_t hours = (uptime % 86400) / 3600;
+        uint32_t mins = (uptime % 3600) / 60;
+        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
+        if (days)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
+        else if (hours)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
+        else
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
@@ -721,4 +729,4 @@ void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int1
 
 } // namespace DebugRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/MenuHandler.cpp

@@ -102,7 +102,8 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "KZ_433",
                                          "KZ_863",
                                          "NP_865",
-                                         "BR_902"};
+                                         "BR_902",
+                                         "EU_866"};
     BannerOverlayOptions bannerOptions;
 #if defined(M5STACK_UNITC6L)
     bannerOptions.message = "LoRa Region";
@@ -111,7 +112,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
 #endif
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 27;
+    bannerOptions.optionsCount = 28;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -119,7 +120,6 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             auto changes = SEGMENT_CONFIG;
 
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
-#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -140,10 +140,9 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
-#endif
             config.lora.tx_enabled = true;
             initRegion();
-            if (myRegion->dutyCycle < 100) {
+            if (getEffectiveDutyCycle() < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
 
@@ -196,8 +195,8 @@ void menuHandler::DeviceRolePicker()
 
 void menuHandler::RadioPresetPicker()
 {
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
+    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",   "MediumSlow",
+                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo", "LiteFast"};
     enum optionsNumbers {
         Back = 0,
         radiopreset_LongSlow = 1,
@@ -207,12 +206,13 @@ void menuHandler::RadioPresetPicker()
         radiopreset_MediumFast = 5,
         radiopreset_ShortSlow = 6,
         radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8
+        radiopreset_ShortTurbo = 8,
+        radiopreset_LiteFast = 9
     };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Radio Preset";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 9;
+    bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Back) {
             menuHandler::menuQueue = menuHandler::lora_Menu;
@@ -234,6 +234,8 @@ void menuHandler::RadioPresetPicker()
             config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
         } else if (selected == radiopreset_ShortTurbo) {
             config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
+        } else if (selected == radiopreset_LiteFast) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
         }
         service->reloadConfig(SEGMENT_CONFIG);
         rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
@@ -576,7 +578,7 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, WiFiToggle, PowerMenu, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
@@ -592,10 +594,6 @@ void menuHandler::systemBaseMenu()
     optionsArray[options] = "Bluetooth Toggle";
 #endif
     optionsEnumArray[options++] = Bluetooth;
-#if HAS_WIFI && !defined(ARCH_PORTDUINO)
-    optionsArray[options] = "WiFi Toggle";
-    optionsEnumArray[options++] = WiFiToggle;
-#endif
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Power";
 #else
@@ -633,11 +631,6 @@ void menuHandler::systemBaseMenu()
         } else if (selected == Bluetooth) {
             menuQueue = bluetooth_toggle_menu;
             screen->runNow();
-#if HAS_WIFI && !defined(ARCH_PORTDUINO)
-        } else if (selected == WiFiToggle) {
-            menuQueue = wifi_toggle_menu;
-            screen->runNow();
-#endif
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -946,9 +939,7 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 0)
-            return;
-        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
+        if (selected == 1 || selected == 2) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -1047,8 +1038,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
-    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -1288,28 +1278,19 @@ void menuHandler::wifiBaseMenu()
 
 void menuHandler::wifiToggleMenu()
 {
-    enum optionsNumbers { Back, Wifi_disable, Wifi_enable };
+    enum optionsNumbers { Back, Wifi_toggle };
 
-    static const char *optionsArray[] = {"Back", "WiFi Disabled", "WiFi Enabled"};
+    static const char *optionsArray[] = {"Back", "Disable"};
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "WiFi Actions";
+    bannerOptions.message = "Disable Wifi and\nEnable Bluetooth?";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
-    if (config.network.wifi_enabled == true)
-        bannerOptions.InitialSelected = 2;
-    else
-        bannerOptions.InitialSelected = 1;
+    bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Wifi_disable) {
+        if (selected == Wifi_toggle) {
             config.network.wifi_enabled = false;
             config.bluetooth.enabled = true;
             service->reloadConfig(SEGMENT_CONFIG);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-        } else if (selected == Wifi_enable) {
-            config.network.wifi_enabled = true;
-            config.bluetooth.enabled = false;
-            service->reloadConfig(SEGMENT_CONFIG);
-            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1357,7 +1338,7 @@ void menuHandler::screenOptionsMenu()
     static int optionsEnumArray[5] = {Back};
     int options = 1;
 
-#if defined(T_DECK) || defined(T_LORA_PAGER) || defined(HACKADAY_COMMUNICATOR)
+#if defined(T_DECK) || defined(T_LORA_PAGER)
     optionsArray[options] = "Show Long/Short Name";
     optionsEnumArray[options++] = NodeNameLength;
 #endif
@@ -1369,13 +1350,12 @@ void menuHandler::screenOptionsMenu()
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
-    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
-    optionsArray[options] = "Frame Visibility Toggle";
+    optionsArray[options] = "Frame Visiblity Toggle";
     optionsEnumArray[options++] = FrameToggles;
 
     optionsArray[options] = "Display Units";
@@ -1772,4 +1752,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/UIRenderer.cpp

@@ -11,7 +11,6 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
-#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -257,8 +256,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -385,7 +383,17 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
+        uint32_t uptime = node->device_metrics.uptime_seconds;
+        uint32_t days = uptime / 86400;
+        uint32_t hours = (uptime % 86400) / 3600;
+        uint32_t mins = (uptime % 3600) / 60;
+        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
+        if (days)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
+        else if (hours)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
+        else
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -584,8 +592,18 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
+    uint32_t uptime = millis() / 1000;
+    uint32_t days = uptime / 86400;
+    uint32_t hours = (uptime % 86400) / 3600;
+    uint32_t mins = (uptime % 3600) / 60;
+    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
+    if (days)
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
+    else if (hours)
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
+    else
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -1030,17 +1048,36 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
-            char uptimeStr[32];
+            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
+            uint32_t days = delta / 86400;
+            uint32_t hours = (delta % 86400) / 3600;
+            uint32_t mins = (delta % 3600) / 60;
+            uint32_t secs = delta % 60;
+
+            char buf[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
+            if (days > 0) {
+                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
+            } else if (hours > 0) {
+                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
+            } else {
+                snprintf(buf, sizeof(buf), "Last: %um", mins);
+            }
 #else
             // Non E-Ink: include seconds where useful
-            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
+            if (days > 0) {
+                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
+            } else if (hours > 0) {
+                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
+            } else if (mins > 0) {
+                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
+            } else {
+                snprintf(buf, sizeof(buf), "Last: %us", secs);
+            }
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
+            display->drawString(0, getTextPositions(display)[line++], buf);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1385,4 +1422,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/images.h

@@ -28,7 +28,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/niche/InkHUD/AppletFont.cpp

@@ -124,7 +124,7 @@ uint32_t InkHUD::AppletFont::toUtf32(std::string utf8)
         utf32 |= (utf8.at(3) & 0b00111111);
         break;
     default:
-        return 0;
+        assert(false);
     }
 
     return utf32;

src/graphics/niche/README.md

@@ -5,6 +5,7 @@ A pattern / collection of resources for creating custom UIs, to target small gro
 For an example, see the `heltec-vision-master-e290-inkhud` platformio env.
 
 - platformio.ini
+
   - suppress default Meshtastic components (Screen, ButtonThread, etc)
   - define `MESHTASTIC_INCLUDE_NICHE_GRAPHICS`
   - (possibly) Edit `build_src_filter` to include our new nicheGraphics.h file

src/input/HackadayCommunicatorKeyboard.cpp

@@ -1,217 +0,0 @@
-#if defined(HACKADAY_COMMUNICATOR)
-
-#include "HackadayCommunicatorKeyboard.h"
-#include "main.h"
-
-#define _TCA8418_COLS 10
-#define _TCA8418_ROWS 8
-#define _TCA8418_NUM_KEYS 80
-
-#define _TCA8418_MULTI_TAP_THRESHOLD 1500
-
-using Key = TCA8418KeyboardBase::TCA8418Key;
-
-constexpr uint8_t modifierRightShiftKey = 30;
-constexpr uint8_t modifierRightShift = 0b0001;
-constexpr uint8_t modifierLeftShiftKey = 76; // keynum -1
-constexpr uint8_t modifierLeftShift = 0b0001;
-// constexpr uint8_t modifierSymKey = 42;
-// constexpr uint8_t modifierSym = 0b0010;
-
-// Num chars per key, Modulus for rotating through characters
-static uint8_t HackadayCommunicatorTapMod[_TCA8418_NUM_KEYS] = {
-    0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-    0, 0, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 1, 2, 2, 2, 2, 2, 2, 0, 0, 0, 1, 2, 2, 2, 1, 2, 2, 0, 0, 0, 2, 1, 2, 2, 0, 1, 1, 0,
-};
-
-static unsigned char HackadayCommunicatorTapMap[_TCA8418_NUM_KEYS][2] = {{},
-                                                                         {},
-                                                                         {'+'},
-                                                                         {'9'},
-                                                                         {'8'},
-                                                                         {'7'},
-                                                                         {'2'},
-                                                                         {'3'},
-                                                                         {'4'},
-                                                                         {'5'},
-                                                                         {Key::ESC},
-                                                                         {'q', 'Q'},
-                                                                         {'w', 'W'},
-                                                                         {'e', 'E'},
-                                                                         {'r', 'R'},
-                                                                         {'t', 'T'},
-                                                                         {'y', 'Y'},
-                                                                         {'u', 'U'},
-                                                                         {'i', 'I'},
-                                                                         {'o', 'O'},
-                                                                         {Key::TAB},
-                                                                         {'a', 'A'},
-                                                                         {'s', 'S'},
-                                                                         {'d', 'D'},
-                                                                         {'f', 'F'},
-                                                                         {'g', 'G'},
-                                                                         {'h', 'H'},
-                                                                         {'j', 'J'},
-                                                                         {'k', 'K'},
-                                                                         {'l', 'L'},
-                                                                         {},
-                                                                         {'z', 'Z'},
-                                                                         {'x', 'X'},
-                                                                         {'c', 'C'},
-                                                                         {'v', 'V'},
-                                                                         {'b', 'B'},
-                                                                         {'n', 'N'},
-                                                                         {'m', 'M'},
-                                                                         {',', '<'},
-                                                                         {'.', '>'},
-                                                                         {},
-                                                                         {},
-                                                                         {},
-                                                                         {'\\'},
-                                                                         {' '},
-                                                                         {},
-                                                                         {Key::RIGHT},
-                                                                         {Key::DOWN},
-                                                                         {Key::LEFT},
-                                                                         {},
-                                                                         {},
-                                                                         {},
-                                                                         {'-'},
-                                                                         {'6', '^'},
-                                                                         {'5', '%'},
-                                                                         {'4', '$'},
-                                                                         {'[', '{'},
-                                                                         {']', '}'},
-                                                                         {'p', 'P'},
-                                                                         {},
-                                                                         {},
-                                                                         {},
-                                                                         {'*'},
-                                                                         {'3', '#'},
-                                                                         {'2', '@'},
-                                                                         {'1', '!'},
-                                                                         {Key::SELECT},
-                                                                         {'\'', '"'},
-                                                                         {';', ':'},
-                                                                         {},
-                                                                         {},
-                                                                         {},
-                                                                         {'/', '?'},
-                                                                         {'='},
-                                                                         {'.', '>'},
-                                                                         {'0', ')'},
-                                                                         {},
-                                                                         {Key::UP},
-                                                                         {Key::BSP},
-                                                                         {}};
-
-HackadayCommunicatorKeyboard::HackadayCommunicatorKeyboard()
-    : TCA8418KeyboardBase(_TCA8418_ROWS, _TCA8418_COLS), modifierFlag(0), last_modifier_time(0), last_key(-1), next_key(-1),
-      last_tap(0L), char_idx(0), tap_interval(0)
-{
-    reset();
-}
-
-void HackadayCommunicatorKeyboard::reset(void)
-{
-    TCA8418KeyboardBase::reset();
-    enableInterrupts();
-}
-
-// handle multi-key presses (shift and alt)
-void HackadayCommunicatorKeyboard::trigger()
-{
-    uint8_t count = keyCount();
-    if (count == 0)
-        return;
-    for (uint8_t i = 0; i < count; ++i) {
-        uint8_t k = readRegister(TCA8418_REG_KEY_EVENT_A + i);
-        uint8_t key = k & 0x7F;
-        if (k & 0x80) {
-            pressed(key);
-        } else {
-            released();
-            state = Idle;
-        }
-    }
-}
-
-void HackadayCommunicatorKeyboard::pressed(uint8_t key)
-{
-    if (state == Init || state == Busy) {
-        return;
-    }
-
-    if (modifierFlag && (millis() - last_modifier_time > _TCA8418_MULTI_TAP_THRESHOLD)) {
-        modifierFlag = 0;
-    }
-
-    uint8_t next_key = 0;
-    int row = (key - 1) / 10;
-    int col = (key - 1) % 10;
-    if (row >= _TCA8418_ROWS || col >= _TCA8418_COLS) {
-        return; // Invalid key
-    }
-
-    next_key = row * _TCA8418_COLS + col;
-    state = Held;
-
-    uint32_t now = millis();
-    tap_interval = now - last_tap;
-
-    updateModifierFlag(next_key);
-    if (isModifierKey(next_key)) {
-        last_modifier_time = now;
-    }
-
-    if (tap_interval < 0) {
-        last_tap = 0;
-        state = Busy;
-        return;
-    }
-
-    if (next_key != last_key || tap_interval > _TCA8418_MULTI_TAP_THRESHOLD) {
-        char_idx = 0;
-    } else {
-        char_idx += 1;
-    }
-
-    last_key = next_key;
-    last_tap = now;
-}
-
-void HackadayCommunicatorKeyboard::released()
-{
-    if (state != Held) {
-        return;
-    }
-
-    if (last_key < 0 || last_key >= _TCA8418_NUM_KEYS) {
-        last_key = -1;
-        state = Idle;
-        return;
-    }
-
-    uint32_t now = millis();
-    last_tap = now;
-    if (HackadayCommunicatorTapMod[last_key])
-        queueEvent(HackadayCommunicatorTapMap[last_key][modifierFlag % HackadayCommunicatorTapMod[last_key]]);
-    if (isModifierKey(last_key) == false)
-        modifierFlag = 0;
-}
-
-void HackadayCommunicatorKeyboard::updateModifierFlag(uint8_t key)
-{
-    if (key == modifierRightShiftKey) {
-        modifierFlag ^= modifierRightShift;
-    } else if (key == modifierLeftShiftKey) {
-        modifierFlag ^= modifierLeftShift;
-    }
-}
-
-bool HackadayCommunicatorKeyboard::isModifierKey(uint8_t key)
-{
-    return (key == modifierRightShiftKey || key == modifierLeftShiftKey);
-}
-
-#endif

src/input/HackadayCommunicatorKeyboard.h

@@ -1,26 +0,0 @@
-#include "TCA8418KeyboardBase.h"
-
-class HackadayCommunicatorKeyboard : public TCA8418KeyboardBase
-{
-  public:
-    HackadayCommunicatorKeyboard();
-    void reset(void);
-    void trigger(void) override;
-    virtual ~HackadayCommunicatorKeyboard() {}
-
-  protected:
-    void pressed(uint8_t key) override;
-    void released(void) override;
-
-    void updateModifierFlag(uint8_t key);
-    bool isModifierKey(uint8_t key);
-
-  private:
-    uint8_t modifierFlag;        // Flag to indicate if a modifier key is pressed
-    uint32_t last_modifier_time; // Timestamp of the last modifier key press
-    int8_t last_key;
-    int8_t next_key;
-    uint32_t last_tap;
-    uint8_t char_idx;
-    int32_t tap_interval;
-};

src/input/InputBroker.cpp

@@ -52,7 +52,7 @@ int InputBroker::handleInputEvent(const InputEvent *event)
     powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
 
     if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
-        moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
+        moduleConfig.external_notification.enabled) {
         externalNotificationModule->stopNow();
     }
 

src/input/InputBroker.h

@@ -3,12 +3,6 @@
 #include "Observer.h"
 #include "freertosinc.h"
 
-#ifdef InputBrokerDebug
-#define LOG_INPUT(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_INPUT(...)
-#endif
-
 enum input_broker_event {
     INPUT_BROKER_NONE = 0,
     INPUT_BROKER_SELECT = 10,

src/input/SerialKeyboard.cpp

@@ -2,8 +2,6 @@
 #include "configuration.h"
 #include <Throttle.h>
 
-SerialKeyboard *globalSerialKeyboard = nullptr;
-
 #ifdef INPUTBROKER_SERIAL_TYPE
 #define CANNED_MESSAGE_MODULE_ENABLE 1 // in case it's not set in the variant file
 
@@ -27,8 +25,6 @@ unsigned char KeyMap[3][4][10] = {{{'.', 'a', 'd', 'g', 'j', 'm', 'p', 't', 'w',
 SerialKeyboard::SerialKeyboard(const char *name) : concurrency::OSThread(name)
 {
     this->_originName = name;
-
-    globalSerialKeyboard = this;
 }
 
 void SerialKeyboard::erase()
@@ -89,21 +85,9 @@ int32_t SerialKeyboard::runOnce()
             e.source = this->_originName;
             // SELECT OR SEND OR CANCEL EVENT
             if (!(shiftRegister2 & (1 << 3))) {
-                if (shift > 0) {
-                    e.inputEvent = INPUT_BROKER_ANYKEY; // REQUIRED
-                    e.kbchar = 0x09;                    // TAB
-                    shift = 0;                          // reset shift after TAB
-                } else {
-                    e.inputEvent = INPUT_BROKER_LEFT;
-                }
+                e.inputEvent = INPUT_BROKER_UP;
             } else if (!(shiftRegister2 & (1 << 2))) {
-                if (shift > 0) {
-                    e.inputEvent = INPUT_BROKER_ANYKEY; // REQUIRED
-                    e.kbchar = 0x09;                    // TAB
-                    shift = 0;                          // reset shift after TAB
-                } else {
-                    e.inputEvent = INPUT_BROKER_RIGHT;
-                }
+                e.inputEvent = INPUT_BROKER_RIGHT;
                 e.kbchar = 0;
             } else if (!(shiftRegister2 & (1 << 1))) {
                 e.inputEvent = INPUT_BROKER_SELECT;

src/input/SerialKeyboard.h

@@ -8,8 +8,6 @@ class SerialKeyboard : public Observable<const InputEvent *>, public concurrency
   public:
     explicit SerialKeyboard(const char *name);
 
-    uint8_t getShift() const { return shift; }
-
   protected:
     virtual int32_t runOnce() override;
     void erase();
@@ -24,6 +22,4 @@ class SerialKeyboard : public Observable<const InputEvent *>, public concurrency
     int lastKeyPressed = 13;
     int quickPress = 0;
     unsigned long lastPressTime = 0;
-};
-
-extern SerialKeyboard *globalSerialKeyboard;
+};

src/input/kbI2cBase.cpp

@@ -7,8 +7,6 @@
 #include "TDeckProKeyboard.h"
 #elif defined(T_LORA_PAGER)
 #include "TLoraPagerKeyboard.h"
-#elif defined(HACKADAY_COMMUNICATOR)
-#include "HackadayCommunicatorKeyboard.h"
 #else
 #include "TCA8418Keyboard.h"
 #endif
@@ -22,8 +20,6 @@ KbI2cBase::KbI2cBase(const char *name)
       TCAKeyboard(*(new TDeckProKeyboard()))
 #elif defined(T_LORA_PAGER)
       TCAKeyboard(*(new TLoraPagerKeyboard()))
-#elif defined(HACKADAY_COMMUNICATOR)
-      TCAKeyboard(*(new HackadayCommunicatorKeyboard()))
 #else
       TCAKeyboard(*(new TCA8418Keyboard()))
 #endif
@@ -332,7 +328,7 @@ int32_t KbI2cBase::runOnce()
                 break;
             }
             if (e.inputEvent != INPUT_BROKER_NONE) {
-                // LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
+                LOG_DEBUG("TCA8418 Notifying: %i Char: %c", e.inputEvent, e.kbchar);
                 this->notifyObservers(&e);
             }
             TCAKeyboard.trigger();

src/main.cpp

@@ -394,10 +394,7 @@ void setup()
     io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
     io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
     io.pinMode(EXPANDS_SD_PULLEN, INPUT);
-#elif defined(HACKADAY_COMMUNICATOR)
-    pinMode(KB_INT, INPUT);
 #endif
-
     concurrency::hasBeenSetup = true;
 #if ARCH_PORTDUINO
     SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
@@ -480,10 +477,6 @@ void setup()
 #ifdef RESET_OLED
     pinMode(RESET_OLED, OUTPUT);
     digitalWrite(RESET_OLED, 1);
-    delay(2);
-    digitalWrite(RESET_OLED, 0);
-    delay(10);
-    digitalWrite(RESET_OLED, 1);
 #endif
 
 #ifdef SENSOR_POWER_CTRL_PIN
@@ -881,7 +874,7 @@ void setup()
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_SPISSD1306) || defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
+    defined(USE_SPISSD1306)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
         if ((screen_found.port != ScanI2C::I2CPort::NO_I2C || portduino_config.displayPanel) &&
@@ -966,7 +959,6 @@ void setup()
     i2cScanner.reset();
 #endif
 
-#if !defined(MESHTASTIC_EXCLUDE_PKI)
     // warn the user about a low entropy key
     if (nodeDB->keyIsLowEntropy && !nodeDB->hasWarned) {
         LOG_WARN(LOW_ENTROPY_WARNING);
@@ -977,7 +969,6 @@ void setup()
         service->sendClientNotification(cn);
         nodeDB->hasWarned = true;
     }
-#endif
 
 // buttons are now inputBroker, so have to come after setupModules
 #if HAS_BUTTON
@@ -1158,7 +1149,7 @@ void setup()
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
     defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
-    defined(USE_ST7796) || defined(USE_SPISSD1306) || defined(HACKADAY_COMMUNICATOR)
+    defined(USE_SPISSD1306)
     if (screen)
         screen->setup();
 #elif defined(ARCH_PORTDUINO)

src/mesh/Default.h

@@ -57,7 +57,14 @@ class Default
     // Note: Kept as uint32_t to match the public API parameter type
     static float congestionScalingCoefficient(uint32_t numOnlineNodes)
     {
-        if (numOnlineNodes <= 40) {
+        // Increase frequency of broadcasts for small networks regardless of preset
+        if (numOnlineNodes <= 10) {
+            return 0.6;
+        } else if (numOnlineNodes <= 20) {
+            return 0.7;
+        } else if (numOnlineNodes <= 30) {
+            return 0.8;
+        } else if (numOnlineNodes <= 40) {
             return 1.0;
         } else {
             float throttlingFactor = 0.075;

src/mesh/LR11x0Interface.cpp

@@ -244,8 +244,6 @@ template <typename T> void LR11x0Interface<T>::startReceive()
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     int err =
         lora.startReceive(RADIOLIB_LR11X0_RX_TIMEOUT_INF, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS, RADIOLIB_IRQ_RX_DEFAULT_MASK, 0);
-    if (err)
-        LOG_ERROR("StartReceive error: %d", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     RadioLibInterface::startReceive();
@@ -306,4 +304,4 @@ template <typename T> bool LR11x0Interface<T>::sleep()
 
     return true;
 }
-#endif
+#endif

src/mesh/MeshRadio.h

@@ -22,4 +22,11 @@ struct RegionInfo {
 extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
-extern void initRegion();
+extern void initRegion();
+
+/**
+ * Get the effective duty cycle for the current region based on device role.
+ * For EU_866, returns 10% for fixed devices (ROUTER, ROUTER_LATE) and 2.5% for mobile devices.
+ * For other regions, returns the standard duty cycle.
+ */
+extern float getEffectiveDutyCycle();

src/mesh/NodeDB.cpp

@@ -653,7 +653,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
+     defined(ELECROW_PANEL)||defined(HELTEC_V4_TFT)) &&                                                                                                  \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -664,8 +664,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.bluetooth.fixed_pin = defaultBLEPin;
 
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
-    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) ||         \
-    defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR)
+    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306)
     bool hasScreen = true;
 #ifdef HELTEC_MESH_NODE_T114
     uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
@@ -735,9 +734,6 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
 #endif
-#ifdef COMPASS_ORIENTATION
-    config.display.compass_orientation = COMPASS_ORIENTATION;
-#endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
     if (WiFiOTA::isUpdated()) {
         WiFiOTA::recoverConfig(&config.network);
@@ -2012,7 +2008,6 @@ UserLicenseStatus NodeDB::getLicenseStatus(uint32_t nodeNum)
     return info->user.is_licensed ? UserLicenseStatus::Licensed : UserLicenseStatus::NotLicensed;
 }
 
-#if !defined(MESHTASTIC_EXCLUDE_PKI)
 bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest)
 {
     if (keyToTest.size == 32) {
@@ -2027,7 +2022,6 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
     }
     return false;
 }
-#endif
 
 bool NodeDB::backupPreferences(meshtastic_AdminMessage_BackupLocation location)
 {

src/mesh/NodeDB.h

@@ -283,9 +283,7 @@ class NodeDB
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
 
-#if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
-#endif
 
     bool backupPreferences(meshtastic_AdminMessage_BackupLocation location);
     bool restorePreferences(meshtastic_AdminMessage_BackupLocation location,
@@ -375,4 +373,4 @@ extern uint32_t error_address;
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \
      ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
 
-// Please do not remove this comment, it makes trunk and compiler happy at the same time.
+// Please do not remove this comment, it makes trunk and compiler happy at the same time.

src/mesh/RadioInterface.cpp

@@ -187,6 +187,13 @@ const RegionInfo regions[] = {
     */
     RDEF(BR_902, 902.0f, 907.5f, 100, 0, 30, true, false, false),
 
+    /*
+        EU 866MHz RFID band (ETSI EN 302 208): 4 channels at 865.7/866.3/866.9/867.5 MHz
+        475 kHz gap between channels, 27 dBm, duty cycle 2.5% (mobile) or 10% (fixed)
+        https://www.etsi.org/deliver/etsi_en/302200_302299/302208/03.04.01_60/en_302208v030401p.pdf
+    */
+    RDEF(EU_866, 865.6375f, 867.5625f, 2.5, 0.475, 27, true, false, false),
+
     /*
        2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
     */
@@ -219,6 +226,23 @@ void initRegion()
     myRegion = r;
 }
 
+/**
+ * Get duty cycle for current region. EU_866: 10% for routers, 2.5% for mobile.
+ */
+float getEffectiveDutyCycle()
+{
+    if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866) {
+        if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
+            config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
+            return 10.0f;
+        } else {
+            return 2.5f;
+        }
+    }
+    // For all other regions, return the standard duty cycle
+    return myRegion->dutyCycle;
+}
+
 /**
  * ## LoRaWAN for North America
 
@@ -518,6 +542,11 @@ void RadioInterface::applyModemConfig()
                 cr = 8;
                 sf = 12;
                 break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST:
+                bw = 125;
+                cr = 5;
+                sf = 9;
+                break;
             }
         } else {
             sf = loraConfig.spread_factor;
@@ -551,6 +580,19 @@ void RadioInterface::applyModemConfig()
             // Set to default modem preset
             loraConfig.use_preset = true;
             loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        } else if (myRegion->code == meshtastic_Config_LoRaConfig_RegionCode_EU_866 && bw != 125) {
+            static const char *err_string = "EU_866 requires 125kHz bandwidth. Fall back to LiteFast preset";
+            LOG_ERROR(err_string);
+            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
+
+            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+            cn->level = meshtastic_LogRecord_Level_ERROR;
+            sprintf(cn->message, err_string);
+            service->sendClientNotification(cn);
+
+            // Set to LiteFast preset which is compliant
+            loraConfig.use_preset = true;
+            loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST;
         } else {
             validConfig = true;
         }
@@ -569,8 +611,9 @@ void RadioInterface::applyModemConfig()
     // Set final tx_power back onto config
     loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
 
-    // Calculate the number of channels
-    uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
+    // Calculate number of channels: spacing = gap between channels (0 for continuous spectrum)
+    float channelSpacing = myRegion->spacing + (bw / 1000);
+    uint32_t numChannels = round((myRegion->freqEnd - myRegion->freqStart + myRegion->spacing) / channelSpacing);
 
     // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
     const char *channelName = channels.getName(channels.getPrimaryIndex());
@@ -582,11 +625,8 @@ void RadioInterface::applyModemConfig()
         channel_num ==
         hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
 
-    // Old frequency selection formula
-    // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
-
-    // New frequency selection formula
-    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * (bw / 1000));
+    // Calculate frequency: freqStart is band edge, add half bandwidth to get first channel center
+    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * channelSpacing);
 
     // override if we have a verbatim frequency
     if (loraConfig.override_frequency) {

src/mesh/Router.cpp

@@ -294,10 +294,11 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
     } // should have already been handled by sendLocal
 
     // Abort sending if we are violating the duty cycle
-    if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
+    float effectiveDutyCycle = getEffectiveDutyCycle();
+    if (!config.lora.override_duty_cycle && effectiveDutyCycle < 100) {
         float hourlyTxPercent = airTime->utilizationTXPercent();
-        if (hourlyTxPercent > myRegion->dutyCycle) {
-            uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle);
+        if (hourlyTxPercent > effectiveDutyCycle) {
+            uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, effectiveDutyCycle);
 
             LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d mins", silentMinutes);
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -288,12 +288,6 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_WISMESH_TAP_V2 = 116,
     /* RAK3401 */
     meshtastic_HardwareModel_RAK3401 = 117,
-    /* RAK6421 Hat+ */
-    meshtastic_HardwareModel_RAK6421 = 118,
-    /* Elecrow ThinkNode M4 */
-    meshtastic_HardwareModel_THINKNODE_M4 = 119,
-    /* Elecrow ThinkNode M6 */
-    meshtastic_HardwareModel_THINKNODE_M6 = 120,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -831,11 +825,7 @@ typedef struct _meshtastic_MeshPacket {
  Note: Our crypto implementation uses this field as well.
  See [crypto](/docs/overview/encryption) for details. */
     uint32_t from;
-    /* The (immediate) destination for this packet
- If the value is 4,294,967,295 (maximum value of an unsigned 32bit integer), this indicates that the packet was
- not destined for a specific node, but for a channel as indicated by the value of `channel` below.
- If the value is another, this indicates that the packet was destined for a specific
- node (i.e. a kind of "Direct Message" to this node) and not broadcast on a channel. */
+    /* The (immediate) destination for this packet */
     uint32_t to;
     /* (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
  If unset, packet was on the primary channel.

src/modules/AdminModule.cpp

@@ -773,7 +773,6 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.lora = validatedLora;
         // If we're setting region for the first time, init the region and regenerate the keys
         if (isRegionUnset && config.lora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -792,10 +791,9 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
-#endif
             config.lora.tx_enabled = true;
             initRegion();
-            if (myRegion->dutyCycle < 100) {
+            if (getEffectiveDutyCycle() < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
             //  Compare the entire string, we are sure of the length as a topic has never been set

src/modules/CannedMessageModule.cpp

@@ -16,7 +16,6 @@
 #include "graphics/draw/NotificationRenderer.h"
 #include "graphics/emotes.h"
 #include "graphics/images.h"
-#include "input/SerialKeyboard.h"
 #include "main.h" // for cardkb_found
 #include "mesh/generated/meshtastic/cannedmessages.pb.h"
 #include "modules/AdminModule.h"
@@ -837,7 +836,6 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() > 0) {
         payload = 0x08;
         lastTouchMillis = millis();
-        requestFocus();
         runOnce();
         return true;
     }
@@ -846,7 +844,6 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_LEFT) {
         payload = INPUT_BROKER_LEFT;
         lastTouchMillis = millis();
-        requestFocus();
         runOnce();
         return true;
     }
@@ -854,7 +851,6 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_RIGHT) {
         payload = INPUT_BROKER_RIGHT;
         lastTouchMillis = millis();
-        requestFocus();
         runOnce();
         return true;
     }
@@ -1849,88 +1845,7 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
             display->drawString(x + display->getWidth() - display->getStringWidth(buffer), y + 0, buffer);
         }
 
-#if INPUTBROKER_SERIAL_TYPE == 1
-        // Chatter Modifier key mode label (right side)
-        {
-            uint8_t mode = globalSerialKeyboard ? globalSerialKeyboard->getShift() : 0;
-            const char *label = (mode == 0) ? "a" : (mode == 1) ? "A" : "#";
-
-            display->setFont(FONT_SMALL);
-            display->setTextAlignment(TEXT_ALIGN_LEFT);
-
-            const int16_t th = FONT_HEIGHT_SMALL;
-            const int16_t tw = display->getStringWidth(label);
-            const int16_t padX = 3;
-            const int16_t padY = 2;
-            const int16_t r = 3;
-
-            const int16_t bw = tw + padX * 2;
-            const int16_t bh = th + padY * 2;
-
-            const int16_t bx = x + display->getWidth() - bw - 2;
-            const int16_t by = y + display->getHeight() - bh - 2;
-
-            display->setColor(WHITE);
-            display->fillRect(bx + r, by, bw - r * 2, bh);
-            display->fillRect(bx, by + r, r, bh - r * 2);
-            display->fillRect(bx + bw - r, by + r, r, bh - r * 2);
-            display->fillCircle(bx + r, by + r, r);
-            display->fillCircle(bx + bw - r - 1, by + r, r);
-            display->fillCircle(bx + r, by + bh - r - 1, r);
-            display->fillCircle(bx + bw - r - 1, by + bh - r - 1, r);
-
-            display->setColor(BLACK);
-            display->drawString(bx + padX, by + padY, label);
-        }
-
-        // LEFT-SIDE DESTINATION-HINT BOX (“Dest: Shift + ◄”)
-        {
-            display->setFont(FONT_SMALL);
-            display->setTextAlignment(TEXT_ALIGN_LEFT);
-
-            const char *label = "Dest: Shift + ";
-            int16_t labelW = display->getStringWidth(label);
-
-            // triangle size visually matches glyph height, not full line height
-            const int triH = FONT_HEIGHT_SMALL - 3;
-            const int triW = triH * 0.7;
-
-            const int16_t padX = 3;
-            const int16_t padY = 2;
-            const int16_t r = 3;
-
-            const int16_t bw = labelW + triW + padX * 2 + 2;
-            const int16_t bh = FONT_HEIGHT_SMALL + padY * 2;
-
-            const int16_t bx = x + 2;
-            const int16_t by = y + display->getHeight() - bh - 2;
-
-            // Rounded white box
-            display->setColor(WHITE);
-            display->fillRect(bx + r, by, bw - (r * 2), bh);
-            display->fillRect(bx, by + r, r, bh - (r * 2));
-            display->fillRect(bx + bw - r, by + r, r, bh - (r * 2));
-            display->fillCircle(bx + r, by + r, r);
-            display->fillCircle(bx + bw - r - 1, by + r, r);
-            display->fillCircle(bx + r, by + bh - r - 1, r);
-            display->fillCircle(bx + bw - r - 1, by + bh - r - 1, r);
-
-            // Draw text
-            display->setColor(BLACK);
-            display->drawString(bx + padX, by + padY, label);
-
-            // Perfectly center triangle on text baseline
-            int16_t tx = bx + padX + labelW;
-            int16_t ty = by + padY + (FONT_HEIGHT_SMALL / 2) - (triH / 2) - 1; // -1 for optical centering
-
-            // ◄ Left-pointing triangle
-            display->fillTriangle(tx + triW, ty,       // top-right
-                                  tx, ty + triH / 2,   // left center
-                                  tx + triW, ty + triH // bottom-right
-            );
-        }
-#endif
-        // Draw Free Text input with multi-emote support and proper line wrapping
+        // --- Draw Free Text input with multi-emote support and proper line wrapping ---
         display->setColor(WHITE);
         {
             int inputY = 0 + y + FONT_HEIGHT_SMALL;

src/modules/ExternalNotificationModule.cpp

@@ -310,13 +310,15 @@ void ExternalNotificationModule::stopNow()
     rtttl::stop();
 #ifdef HAS_I2S
     LOG_INFO("Stop audioThread playback");
-    audioThread->stop();
+    if (audioThread->isPlaying())
+        audioThread->stop();
 #endif
     // Turn off all outputs
-    LOG_INFO("Turning off setExternalStates");
+    LOG_INFO("Turning off setExternalStates: ");
     for (int i = 0; i < 3; i++) {
         setExternalState(i, false);
         externalTurnedOn[i] = 0;
+        LOG_INFO("%d ", i);
     }
     setIntervalFromNow(0);
 #ifdef T_WATCH_S3

src/modules/Modules.cpp

@@ -13,8 +13,6 @@
 #include "input/TrackballInterruptImpl1.h"
 #endif
 
-#include "modules/StatusLEDModule.h"
-
 #if !MESHTASTIC_EXCLUDE_I2C
 #include "input/cardKbI2cImpl.h"
 #endif
@@ -121,10 +119,6 @@ void setupModules()
         buzzerFeedbackThread = new BuzzerFeedbackThread();
     }
 #endif
-#if defined(LED_CHARGE) || defined(LED_PAIRING)
-    statusLEDModule = new StatusLEDModule();
-#endif
-
 #if !MESHTASTIC_EXCLUDE_ADMIN
     adminModule = new AdminModule();
 #endif
@@ -181,13 +175,12 @@ void setupModules()
     // new ReplyModule();
 #if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-#ifndef T_LORA_PAGER
         rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
         if (!rotaryEncoderInterruptImpl1->init()) {
             delete rotaryEncoderInterruptImpl1;
             rotaryEncoderInterruptImpl1 = nullptr;
         }
-#elif defined(T_LORA_PAGER)
+#ifdef T_LORA_PAGER
         // use a special FSM based rotary encoder version for T-LoRa Pager
         rotaryEncoderImpl = new RotaryEncoderImpl();
         if (!rotaryEncoderImpl->init()) {

src/modules/SerialModule.cpp

@@ -64,8 +64,7 @@ SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
 #if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
-    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) ||      \
-    defined(MUZI_BASE)
+    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
 {
     api_type = TYPE_SERIAL;
@@ -205,7 +204,7 @@ int32_t SerialModule::runOnce()
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
 #elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                             \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
                 Serial2.setFIFOSize(RX_BUFFER);
@@ -262,7 +261,7 @@ int32_t SerialModule::runOnce()
             }
 
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                               \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
 
@@ -537,8 +536,7 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
-    !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/StatusLEDModule.cpp

@@ -1,94 +0,0 @@
-#include "StatusLEDModule.h"
-#include "MeshService.h"
-#include "configuration.h"
-#include <Arduino.h>
-
-/*
-StatusLEDModule manages the device's status LEDs, updating their states based on power and Bluetooth status.
-It reflects charging, charged, discharging, and Bluetooth connection states using the appropriate LEDs.
-*/
-StatusLEDModule *statusLEDModule;
-
-StatusLEDModule::StatusLEDModule() : concurrency::OSThread("StatusLEDModule")
-{
-    bluetoothStatusObserver.observe(&bluetoothStatus->onNewStatus);
-    powerStatusObserver.observe(&powerStatus->onNewStatus);
-}
-
-int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
-{
-    switch (arg->getStatusType()) {
-    case STATUS_TYPE_POWER: {
-        meshtastic::PowerStatus *powerStatus = (meshtastic::PowerStatus *)arg;
-        if (powerStatus->getHasUSB()) {
-            power_state = charging;
-            if (powerStatus->getBatteryChargePercent() >= 100) {
-                power_state = charged;
-            }
-        } else {
-            power_state = discharging;
-        }
-        break;
-    }
-    case STATUS_TYPE_BLUETOOTH: {
-        meshtastic::BluetoothStatus *bluetoothStatus = (meshtastic::BluetoothStatus *)arg;
-        switch (bluetoothStatus->getConnectionState()) {
-        case meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED: {
-            ble_state = unpaired;
-            PAIRING_LED_starttime = millis();
-            break;
-        }
-        case meshtastic::BluetoothStatus::ConnectionState::PAIRING: {
-            ble_state = pairing;
-            PAIRING_LED_starttime = millis();
-            break;
-        }
-        case meshtastic::BluetoothStatus::ConnectionState::CONNECTED: {
-            ble_state = connected;
-            PAIRING_LED_starttime = millis();
-            break;
-        }
-        }
-
-        break;
-    }
-    }
-    return 0;
-};
-
-int32_t StatusLEDModule::runOnce()
-{
-
-    if (power_state == charging) {
-        CHARGE_LED_state = !CHARGE_LED_state;
-    } else if (power_state == charged) {
-        CHARGE_LED_state = LED_STATE_ON;
-    } else {
-        CHARGE_LED_state = LED_STATE_OFF;
-    }
-
-    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
-        PAIRING_LED_state = LED_STATE_OFF;
-    } else if (ble_state == unpaired) {
-        if (slowTrack) {
-            PAIRING_LED_state = !PAIRING_LED_state;
-            slowTrack = false;
-        } else {
-            slowTrack = true;
-        }
-    } else if (ble_state == pairing) {
-        PAIRING_LED_state = !PAIRING_LED_state;
-    } else {
-        PAIRING_LED_state = LED_STATE_ON;
-    }
-
-#ifdef LED_CHARGE
-    digitalWrite(LED_CHARGE, CHARGE_LED_state);
-#endif
-    // digitalWrite(green_LED_PIN, LED_STATE_OFF);
-#ifdef LED_PAIRING
-    digitalWrite(LED_PAIRING, PAIRING_LED_state);
-#endif
-
-    return (my_interval);
-}

src/modules/StatusLEDModule.h

@@ -1,44 +0,0 @@
-#pragma once
-
-#include "BluetoothStatus.h"
-#include "MeshModule.h"
-#include "PowerStatus.h"
-#include "concurrency/OSThread.h"
-#include "configuration.h"
-#include <Arduino.h>
-#include <functional>
-
-class StatusLEDModule : private concurrency::OSThread
-{
-    bool slowTrack = false;
-
-  public:
-    StatusLEDModule();
-
-    int handleStatusUpdate(const meshtastic::Status *);
-
-  protected:
-    unsigned int my_interval = 1000; // interval in millisconds
-    virtual int32_t runOnce() override;
-
-    CallbackObserver<StatusLEDModule, const meshtastic::Status *> bluetoothStatusObserver =
-        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
-    CallbackObserver<StatusLEDModule, const meshtastic::Status *> powerStatusObserver =
-        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
-
-  private:
-    bool CHARGE_LED_state = LED_STATE_OFF;
-    bool PAIRING_LED_state = LED_STATE_OFF;
-
-    uint32_t PAIRING_LED_starttime = 0;
-
-    enum PowerState { discharging, charging, charged };
-
-    PowerState power_state = discharging;
-
-    enum BLEState { unpaired, pairing, connected };
-
-    BLEState ble_state = unpaired;
-};
-
-extern StatusLEDModule *statusLEDModule;

src/modules/SystemCommandsModule.cpp

@@ -1,5 +1,4 @@
 #include "SystemCommandsModule.h"
-#include "input/InputBroker.h"
 #include "meshUtils.h"
 #if HAS_SCREEN
 #include "graphics/Screen.h"
@@ -23,7 +22,7 @@ SystemCommandsModule::SystemCommandsModule()
 
 int SystemCommandsModule::handleInputEvent(const InputEvent *event)
 {
-    LOG_INPUT("SystemCommands Input event %u! kb %u", event->inputEvent, event->kbchar);
+    LOG_INFO("Input event %u! kb %u", event->inputEvent, event->kbchar);
     // System commands (all others fall through)
     switch (event->kbchar) {
     // Fn key symbols
@@ -86,8 +85,10 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     switch (event->inputEvent) {
         // GPS
     case INPUT_BROKER_GPS_TOGGLE:
+        LOG_WARN("GPS Toggle");
 #if !MESHTASTIC_EXCLUDE_GPS
         if (gps) {
+            LOG_WARN("GPS Toggle2");
             if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
                 config.position.fixed_position == false) {
                 nodeDB->clearLocalPosition();