Double the number of bluetooth bonds NimBLE will store (from 3 to 6)

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.14"
+      "version": "latest"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v5
+      uses: actions/upload-artifact@v4
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v6
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -22,7 +22,7 @@ jobs:
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip

.github/workflows/build_one_arch.yml

@@ -0,0 +1,232 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker-deb-amd64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v5
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,6 +15,7 @@ on:
           - rp2040
           - rp2350
           - stm32
+          - native
       target:
         type: string
         required: false
@@ -41,9 +42,10 @@ jobs:
           - rp2040
           - rp2350
           - stm32
+
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -58,13 +60,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -85,6 +87,81 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker-deb-amd64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
+      push: false
+
   gather-artifacts:
     permissions:
       contents: write
@@ -93,12 +170,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +188,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -127,7 +204,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -146,7 +223,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -27,6 +27,7 @@ on:
 
 jobs:
   setup:
+    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: true
       matrix:
@@ -35,12 +36,16 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
           cache: pip
       - run: pip install -U platformio
+      - name: Uncomment build epoch
+        shell: bash
+        run: |
+          sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
       - name: Generate matrix
         id: jsonStep
         run: |
@@ -57,9 +62,10 @@ jobs:
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +87,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -119,26 +125,60 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
     uses: ./.github/workflows/test_native.yml
 
-  docker:
+  docker-deb-amd64:
-    strategy:
+    if: github.repository == 'meshtastic/firmware'
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
     uses: ./.github/workflows/docker_build.yml
     with:
-      distro: ${{ matrix.distro }}
+      distro: debian
-      platform: ${{ matrix.platform }}
+      platform: linux/amd64
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      runs-on: ubuntu-24.04
-      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  docker-deb-amd64-tft:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
       push: false
 
   gather-artifacts:
@@ -163,12 +203,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -181,7 +221,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -197,7 +237,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -216,7 +256,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -242,7 +282,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -261,14 +301,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -311,14 +351,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -335,7 +375,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -366,14 +406,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -99,26 +99,54 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker:
+  docker-deb-amd64:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
     uses: ./.github/workflows/docker_build.yml
     with:
-      distro: ${{ matrix.distro }}
+      distro: debian
-      platform: ${{ matrix.platform }}
+      platform: linux/amd64
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      runs-on: ubuntu-24.04
-      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
       push: false
 
   gather-artifacts:
@@ -142,12 +170,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +188,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -176,7 +204,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -195,7 +223,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -221,7 +249,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -240,14 +268,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -290,14 +318,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -314,7 +342,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -345,14 +373,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -60,10 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
-        with:
-          # Always use master branch for version bumps
-          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: report.sarif
           overwrite: true

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -20,7 +20,5 @@ jobs:
         uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
-          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
+          exempt-issue-labels: pinned,3.0
-          close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
+          exempt-pr-labels: pinned,3.0
-          exempt-issue-labels: pinned,3.0,triaged,backlog
-          exempt-pr-labels: pinned,3.0,triaged,backlog

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.3.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,9 +47,9 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v6
+        uses: actions/setup-node@v5
         with:
-          node-version: 24
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.4
+      ref: v1.7.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
+    - checkov@3.2.473
-    - renovate@42.27.1
+    - renovate@41.132.5
-    - prettier@3.7.3
+    - prettier@3.6.2
-    - trufflehog@3.91.1
+    - trufflehog@3.90.8
     - yamllint@1.37.1
-    - bandit@1.9.2
+    - bandit@1.8.6
-    - trivy@0.67.2
+    - trivy@0.67.0
     - taplo@0.10.0
-    - ruff@0.14.7
+    - ruff@0.13.3
-    - isort@7.0.0
+    - isort@6.1.0
-    - markdownlint@0.46.0
+    - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.9
+    - actionlint@1.7.7
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.11.0
+    - black@25.9.0
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.28.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

alpine.Dockerfile

@@ -8,8 +8,7 @@ ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -41,8 +40,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        i2c-tools libuv libx11 libinput libxkbcommon \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -57,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -7,13 +7,13 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
-build_type = release
+build_type = debug
 build_flags =
-  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -21,17 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -Os
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
+  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.4.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -37,9 +37,6 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
-  -Wl,--wrap=__assert_func
-  -Wl,--wrap=strerror
-  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/analyze_map.py

@@ -1,165 +0,0 @@
-#!/usr/bin/env python3
-"""Summarise linker map output to highlight heavy object files and libraries.
-
-Usage:
-    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
-
-The script parses GNU ld map files and aggregates section sizes per object file
-and per archive/library, then prints sortable tables that make it easy to spot
-modules worth trimming or hiding behind feature flags.
-"""
-from __future__ import annotations
-
-import argparse
-import collections
-import os
-import re
-import sys
-from typing import DefaultDict, Dict, Tuple
-
-
-SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
-ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
-
-
-def human_size(num_bytes: int) -> str:
-    """Return a friendly size string with one decimal place."""
-    if num_bytes < 1024:
-        return f"{num_bytes:,} B"
-    num = float(num_bytes)
-    for unit in ("KB", "MB", "GB"):
-        num /= 1024.0
-        if num < 1024.0:
-            return f"{num:.1f} {unit}"
-    return f"{num:.1f} TB"
-
-
-def shorten_path(path: str, root: str) -> str:
-    """Prefer repository-relative paths for readability."""
-    path = path.strip()
-    if not path:
-        return path
-
-    # Normalise Windows archives (backslashes) to POSIX style for consistency.
-    path = path.replace("\\", "/")
-
-    # Attempt to strip the root when an absolute path lives inside the repo.
-    if os.path.isabs(path):
-        try:
-            rel = os.path.relpath(path, root)
-            if not rel.startswith(".."):
-                return rel
-        except ValueError:
-            # relpath can fail on mixed drives on Windows; fall back to basename.
-            pass
-    return path
-
-
-def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
-    """Return a human friendly object label and the library it belongs to."""
-    raw_object = raw_object.strip()
-    lib_label = "[app]"
-    match = ARCHIVE_MEMBER_RE.match(raw_object)
-    if match:
-        archive = shorten_path(match.group("archive"), root)
-        obj = match.group("object")
-        lib_label = os.path.basename(archive) or archive
-        label = f"{archive}:{obj}"
-    else:
-        label = shorten_path(raw_object, root)
-        # If the object lives under libs, hint at the containing directory.
-        parent = os.path.basename(os.path.dirname(label))
-        if parent:
-            lib_label = parent
-    return label, lib_label
-
-
-def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
-    per_object: DefaultDict[str, int] = collections.defaultdict(int)
-    per_library: DefaultDict[str, int] = collections.defaultdict(int)
-    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
-
-    try:
-        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
-            for line in handle:
-                match = SECTION_LINE_RE.match(line)
-                if not match:
-                    continue
-
-                section = match.group("section")
-                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
-                    continue
-
-                size = int(match.group("size"), 16)
-                if size == 0:
-                    continue
-
-                obj_token = match.group("object").strip()
-                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
-                    continue
-
-                label, lib_label = describe_object(obj_token, repo_root)
-                per_object[label] += size
-                per_library[lib_label] += size
-                per_object_sections[label][section] += size
-    except FileNotFoundError:
-        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
-
-    return per_object, per_library, per_object_sections
-
-
-def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
-    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
-    parts = []
-    for section, size in items[:limit]:
-        pct = (size / total) * 100 if total else 0
-        parts.append(f"{section} {pct:.1f}%")
-    if len(items) > limit:
-        remainder = total - sum(size for _, size in items[:limit])
-        pct = (remainder / total) * 100 if total else 0
-        parts.append(f"other {pct:.1f}%")
-    return ", ".join(parts)
-
-
-def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
-    total_bytes = sum(per_object.values())
-    if total_bytes == 0:
-        print("No section data found in map file.")
-        return
-
-    print(f"Map file: {map_path}")
-    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
-
-    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
-    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        breakdown = format_section_breakdown(per_object_sections[obj], size)
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
-        print(f"    {obj}")
-        if breakdown:
-            print(f"    sections: {breakdown}")
-    print()
-
-    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
-    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
-
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
-    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
-    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
-    args = parser.parse_args()
-
-    map_path = os.path.abspath(args.map)
-    repo_root = os.path.abspath(os.getcwd())
-
-    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
-    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
-
-
-if __name__ == "__main__":
-    main()

bin/device-install.bat

@@ -15,12 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
 SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
 :help

bin/device-install.sh

@@ -31,23 +31,21 @@ MUIDB_8MB=(
     "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-    "dreamcatcher"
-    "elecrow-adv"
-    "ESP32-S3-Pico"
-    "heltec-v4"
-    "m5stack-cores3"
-    "mesh-tab"
-    "station-g2"
     "t-deck"
+    "mesh-tab"
     "t-energy-s3"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "m5stack-cores3"
+    "station-g2"
     "t-eth-elite"
-    "t-watch-s3"
     "tlora-pager"
+    "t-watch-s3"
+    "elecrow-adv"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
-    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"

bin/kill-github-actions.sh

@@ -1,116 +0,0 @@
-#!/bin/bash
-
-# Script to cancel all running GitHub Actions workflows
-# Requires GitHub CLI (gh) to be installed and authenticated
-
-set -e
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-# Function to print colored output
-print_status() {
-    echo -e "${GREEN}[INFO]${NC} $1"
-}
-
-print_warning() {
-    echo -e "${YELLOW}[WARN]${NC} $1"
-}
-
-print_error() {
-    echo -e "${RED}[ERROR]${NC} $1"
-}
-
-# Check if gh CLI is installed
-if ! command -v gh &> /dev/null; then
-    print_error "GitHub CLI (gh) is not installed. Please install it first:"
-    echo "  brew install gh"
-    echo "  Or visit: https://cli.github.com/"
-    exit 1
-fi
-
-# Check if authenticated
-if ! gh auth status &> /dev/null; then
-    print_error "GitHub CLI is not authenticated. Please run:"
-    echo "  gh auth login"
-    exit 1
-fi
-
-# Get repository info
-REPO=$(gh repo view --json owner,name -q '.owner.login + "/" + .name')
-if [[ -z "$REPO" ]]; then
-    print_error "Could not determine repository. Make sure you're in a GitHub repository."
-    exit 1
-fi
-
-print_status "Working with repository: $REPO"
-
-# Get all active workflows (both queued and in-progress)
-print_status "Fetching active workflows (queued and in-progress)..."
-QUEUED_WORKFLOWS=$(gh run list --status queued --json databaseId,displayTitle,headBranch,status --limit 100)
-IN_PROGRESS_WORKFLOWS=$(gh run list --status in_progress --json databaseId,displayTitle,headBranch,status --limit 100)
-
-# Combine both lists
-ALL_WORKFLOWS=$(echo "$QUEUED_WORKFLOWS $IN_PROGRESS_WORKFLOWS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$ALL_WORKFLOWS" == "[]" ]]; then
-    print_status "No active workflows found."
-    exit 0
-fi
-
-# Parse and display active workflows
-echo
-print_warning "Found active workflows:"
-echo "$ALL_WORKFLOWS" | jq -r '.[] | "  - \(.displayTitle) (Branch: \(.headBranch), Status: \(.status), ID: \(.databaseId))"'
-
-echo
-read -p "Do you want to cancel ALL these workflows? (y/N): " -n 1 -r
-echo
-
-if [[ ! $REPLY =~ ^[Yy]$ ]]; then
-    print_status "Cancelled by user."
-    exit 0
-fi
-
-# Cancel each workflow
-print_status "Cancelling workflows..."
-CANCELLED_COUNT=0
-FAILED_COUNT=0
-
-while IFS= read -r WORKFLOW_ID; do
-    if [[ -n "$WORKFLOW_ID" ]]; then
-        print_status "Cancelling workflow ID: $WORKFLOW_ID"
-        if gh run cancel "$WORKFLOW_ID" 2>/dev/null; then
-            ((CANCELLED_COUNT++))
-        else
-            print_error "Failed to cancel workflow ID: $WORKFLOW_ID"
-            ((FAILED_COUNT++))
-        fi
-    fi
-done < <(echo "$ALL_WORKFLOWS" | jq -r '.[].databaseId')
-
-echo
-print_status "Summary:"
-echo "  - Cancelled: $CANCELLED_COUNT workflows"
-if [[ $FAILED_COUNT -gt 0 ]]; then
-    echo "  - Failed: $FAILED_COUNT workflows"
-fi
-
-print_status "Done!"
-
-# Optional: Show remaining active workflows
-echo
-print_status "Checking for any remaining active workflows..."
-REMAINING_QUEUED=$(gh run list --status queued --json databaseId --limit 10)
-REMAINING_IN_PROGRESS=$(gh run list --status in_progress --json databaseId --limit 10)
-REMAINING_ALL=$(echo "$REMAINING_QUEUED $REMAINING_IN_PROGRESS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$REMAINING_ALL" == "[]" ]]; then
-    print_status "All workflows successfully cancelled."
-else
-    REMAINING_COUNT=$(echo "$REMAINING_ALL" | jq '. | length')
-    print_warning "Still $REMAINING_COUNT workflows active (may take a moment to update status)"
-fi

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,21 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.17" date="2025-11-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
-    </release>
-    <release version="2.7.16" date="2025-11-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
-    </release>
-    <release version="2.7.15" date="2025-11-13">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
-    </release>
-    <release version="2.7.14" date="2025-11-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
-    </release>
-    <release version="2.7.13" date="2025-10-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
-    </release>
     <release version="2.7.12" date="2025-10-01">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
     </release>

bin/web.version

@@ -1 +1 @@
-2.6.7
+2.6.6

boards/ThinkNode-M3.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M3",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow nrf",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "",
-  "vendor": "ELECROW"
-}

boards/ThinkNode-M6.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m6",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M6",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode M6",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
-  "vendor": "ELECROW"
-}

boards/hackaday-communicator.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "hackaday-communicator"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 1500000
-  },
-  "url": "hackaday.com",
-  "vendor": "hackaday"
-}

boards/heltec_v4.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/muzi-base.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0xcafe"]],
-    "mcu": "nrf52840",
-    "variant": "muzi-base",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Muzi Base",
-  "url": "https://muzi.works/",
-  "vendor": "MuziWorks",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "blackmagic",
-      "cmsis-dap",
-      "mbed",
-      "stlink"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  }
-}

debian/changelog

@@ -1,34 +1,3 @@
-meshtasticd (2.7.17.0) unstable; urgency=medium
-
-  * Version 2.7.17
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 28 Nov 2025 15:11:34 +0000
-
-meshtasticd (2.7.16.0) unstable; urgency=medium
-
-  * Version 2.7.16
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
-
-
-meshtasticd (2.7.15.0) unstable; urgency=medium
-
-  * Version 2.7.15
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
-
-meshtasticd (2.7.14.0) unstable; urgency=medium
-
-  * Version 2.7.14
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
-
-meshtasticd (2.7.13.0) unstable; urgency=medium
-
-  * Version 2.7.13
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 11 Oct 2025 15:27:28 +0000
-
 meshtasticd (2.7.12.0) unstable; urgency=medium
 
   [ Austin Lane ]

debian/control

@@ -3,7 +3,6 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
-               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

meshtasticd.spec.rpkg

@@ -49,13 +49,6 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
-# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
-%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
-BuildRequires: glibc-devel >= 2.38
-%else
-BuildRequires: pkgconfig(libbsd-overlay)
-%endif
-
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -5,7 +5,7 @@
 default_envs = tbeam
 
 extra_configs =
-	variants/*/*.ini
+	arch/*/*.ini
 	variants/*/*/platformio.ini
 	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -90,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -115,13 +115,12 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	# jgromes/RadioLib@7.4.0
+	jgromes/RadioLib@7.3.0
-	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3bf332240416c5cb8c919fac2a0ec7260eb3be75.zip
+	https://github.com/meshtastic/device-ui/archive/6d8cc228298a1ecd9913aed757187e9527c1facc.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -165,11 +164,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.6
+	dfrobot/DFRobot_RTU@1.0.3
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.5
+	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -177,13 +176,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.6
+	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
-	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -213,6 +210,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
+	sensirion/Sensirion Core@0.7.1
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/AudioThread.h

@@ -50,11 +50,8 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-
+        delete rtttlFile;
-        if (rtttlFile != nullptr) {
+        rtttlFile = nullptr;
-            delete rtttlFile;
-            rtttlFile = nullptr;
-        }
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -102,9 +99,9 @@ class AudioThread : public concurrency::OSThread
     };
 
     AudioGeneratorRTTTL *i2sRtttl = nullptr;
-    AudioOutputI2S *audioOut = nullptr;
+    AudioOutputI2S *audioOut;
 
-    AudioFileSourcePROGMEM *rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile;
 };
 
 #endif

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint16_t numOnline = 0;
+    uint8_t numOnline = 0;
-    uint16_t numTotal = 0;
+    uint8_t numTotal = 0;
 
-    uint16_t lastNumTotal = 0;
+    uint8_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint16_t getNumOnline() const { return numOnline; }
+    uint8_t getNumOnline() const { return numOnline; }
 
-    uint16_t getNumTotal() const { return numTotal; }
+    uint8_t getNumTotal() const { return numTotal; }
 
-    uint16_t getLastNumTotal() const { return lastNumTotal; }
+    uint8_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-void battery_adcEnable()
+static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ void battery_adcEnable()
 #endif
 }
 
-static void battery_adcDisable()
+static void adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -278,11 +278,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
-#if defined(BATTERY_CHARGING_INV)
-        // bit of trickery to show 99% up until the charge finishes
-        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
-            battery_SOC = 99;
-#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -325,7 +320,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            battery_adcEnable();
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -337,7 +332,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            battery_adcDisable();
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -460,8 +455,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-#elif defined(MUZI_BASE)
-        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -477,8 +470,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-#elif defined(BATTERY_CHARGING_INV)
-        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -571,7 +562,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                    config.power.device_battery_ina_address) {
             if (!ina226Sensor.isInitialized())
                 return ina226Sensor.runOnce() > 0;
-            return ina226Sensor.isRunning();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -707,18 +697,11 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
+            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
-#ifdef BATTERY_CHARGING_INV
+
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
     enabled = found;
     low_voltage_counter = 0;
 
@@ -775,8 +758,6 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -857,11 +838,8 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    if (millis() > lastLogTime + 50 * 1000) {
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
+              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
-                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
-        lastLogTime = millis();
-    }
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
@@ -924,8 +902,13 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
+#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1453,7 +1436,7 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->isVbusIn(); }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
@@ -1565,4 +1548,4 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif
+#endif

src/PowerFSM.cpp

@@ -57,21 +57,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_POWERFSM("State: SDS");
+    LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
 static void lowBattSDSEnter()
 {
-    LOG_POWERFSM("State: Lower batt SDS");
+    LOG_DEBUG("State: Lower batt SDS");
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
 }
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_POWERFSM("State: SHUTDOWN");
+    LOG_DEBUG("State: SHUTDOWN");
     shutdownAtMsec = millis();
 }
 
@@ -81,7 +81,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_POWERFSM("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
@@ -155,12 +155,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_POWERFSM("State: lsExit");
+    LOG_INFO("Exit state: LS");
 }
 
 static void nbEnter()
 {
-    LOG_POWERFSM("State: nbEnter");
+    LOG_DEBUG("State: NB");
     if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
@@ -173,7 +173,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    LOG_POWERFSM("State: darkEnter");
     setBluetoothEnable(true);
     if (screen)
         screen->setOn(false);
@@ -181,7 +180,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_POWERFSM("State: serialEnter");
+    LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
     if (screen) {
         screen->setOn(true);
@@ -190,14 +189,13 @@ static void serialEnter()
 
 static void serialExit()
 {
-    LOG_POWERFSM("State: serialExit");
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
 }
 
 static void powerEnter()
 {
-    LOG_POWERFSM("State: powerEnter");
+    // LOG_DEBUG("State: POWER");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         LOG_INFO("Loss of power in Powered");
@@ -212,7 +210,6 @@ static void powerEnter()
 
 static void powerIdle()
 {
-    // LOG_POWERFSM("State: powerIdle"); // very chatty
     if (!isPowered()) {
         // If we got here, we are in the wrong state
         LOG_INFO("Loss of power in Powered");
@@ -222,13 +219,14 @@ static void powerIdle()
 
 static void powerExit()
 {
-    LOG_POWERFSM("State: powerExit");
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    LOG_POWERFSM("State: onEnter");
+    LOG_DEBUG("State: ON");
     if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
@@ -236,7 +234,6 @@ static void onEnter()
 
 static void onIdle()
 {
-    LOG_POWERFSM("State: onIdle");
     if (isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
@@ -245,7 +242,7 @@ static void onIdle()
 
 static void bootEnter()
 {
-    LOG_POWERFSM("State: bootEnter");
+    LOG_DEBUG("State: BOOT");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -322,6 +319,11 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
         powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -370,7 +372,7 @@ void PowerFSM_setup()
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
 
-#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

src/PowerFSM.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-#ifdef PowerFSMDebug
-#define LOG_POWERFSM(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_POWERFSM(...)
-#endif
-
 // See sw-design.md for documentation
 
 #define EVENT_PRESS 1

src/SerialConsole.cpp

@@ -50,7 +50,6 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
-    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first

src/configuration.h

@@ -36,29 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Offer chance for variant-specific defines */
 #include "variant.h"
 
-// -----------------------------------------------------------------------------
-// Display feature overrides
-// -----------------------------------------------------------------------------
-
-// Allow build environments to opt-in explicitly to the E-Ink UI stack while
-// keeping headless targets slim by default. Existing variants that already
-// define USE_EINK continue to work without additional flags.
-#ifndef MESHTASTIC_USE_EINK_UI
-#ifdef USE_EINK
-#define MESHTASTIC_USE_EINK_UI 1
-#else
-#define MESHTASTIC_USE_EINK_UI 0
-#endif
-#endif
-
-#if MESHTASTIC_USE_EINK_UI
-#ifndef USE_EINK
-#define USE_EINK
-#endif
-#else
-#undef USE_EINK
-#endif
-
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -149,9 +126,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
 #endif
 
-#ifdef RAK13302
+#ifdef STATION_G2
-#define NUM_PA_POINTS 22
+#define NUM_PA_POINTS 19
-#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
+#define TX_GAIN_LORA 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 19, 19, 18, 18
 #endif
 
 // Default system gain to 0 if not defined
@@ -251,7 +228,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
-#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -273,9 +249,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A // same address as CST226SE
+#define CST328_ADDR 0x1A
-#define CHSC6X_ADDR 0x2E
-#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -394,9 +368,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BLUETOOTH
 #define HAS_BLUETOOTH 0
 #endif
-#ifndef USE_TFTDISPLAY
-#define USE_TFTDISPLAY 0
-#endif
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
@@ -423,13 +394,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
-#ifndef LED_STATE_OFF
-#define LED_STATE_OFF 0
-#endif
-#ifndef LED_STATE_ON
-#define LED_STATE_ON 1
-#endif
-
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -82,11 +82,7 @@ class ScanI2C
         BHI260AP,
         BMM150,
         TSL2561,
-        DRV2605,
+        DRV2605
-        BH1750,
-        DA217,
-        CHSC6X,
-        CST226SE
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CConsumer.cpp

@@ -1,16 +0,0 @@
-#include "ScanI2CConsumer.h"
-#include <forward_list>
-
-static std::forward_list<ScanI2CConsumer *> ScanI2CConsumers;
-
-ScanI2CConsumer::ScanI2CConsumer()
-{
-    ScanI2CConsumers.push_front(this);
-}
-
-void ScanI2CCompleted(ScanI2C *i2cScanner)
-{
-    for (ScanI2CConsumer *consumer : ScanI2CConsumers) {
-        consumer->i2cScanFinished(i2cScanner);
-    }
-}

src/detect/ScanI2CConsumer.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include "ScanI2C.h"
-#include <stddef.h>
-
-class ScanI2CConsumer
-{
-  public:
-    ScanI2CConsumer();
-    virtual void i2cScanFinished(ScanI2C *i2cScanner) = 0;
-};
-
-void ScanI2CCompleted(ScanI2C *i2cScanner);

src/detect/ScanI2CTwoWire.cpp

@@ -106,7 +106,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -378,13 +377,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x5449) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c || registerValue == 0xc8d) {
-                    type = OPT3001;
-                    logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                    type = OPT3001;
+                    logFoundDevice("OPT3001", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -465,23 +464,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TCA9555_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
-                if (registerValue == 0x13) {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-                    if (registerValue == 0x81) {
-                        type = DA217;
-                        logFoundDevice("DA217", (uint8_t)addr.address);
-                    } else {
-                        type = TCA9555;
-                        logFoundDevice("TCA9555", (uint8_t)addr.address);
-                    }
-                } else {
-                    type = TCA9555;
-                    logFoundDevice("TCA9555", (uint8_t)addr.address);
-                }
-                break;
             case TSL25911_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
@@ -499,38 +483,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-            case CST328_ADDR:
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                // Do we have the CST328 or the CST226SE
+                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
-                if (registerValue == 0xA9) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else {
-                    type = CST328;
-                    logFoundDevice("CST328", (uint8_t)addr.address);
-                }
-                break;
-
-                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
-            case LTR553ALS_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
-                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
-                    type = LTR553ALS;
-                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
-                } else {
-                    // Test BH1750 - send power on command
-                    i2cBus->beginTransmission(addr.address);
-                    i2cBus->write(0x01); // Power On command
-                    uint8_t bh1750_error = i2cBus->endTransmission();
-                    if (bh1750_error == 0) {
-                        type = BH1750;
-                        logFoundDevice("BH1750", (uint8_t)addr.address);
-                    } else {
-                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
-                    }
-                }
-                break;
-
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
@@ -539,12 +493,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                // Do we have the MLX90614 or the MPR121KB or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
+                if (registerValue == 0x5a) {
-                if (registerValue == 0xAB) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -562,11 +512,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-#ifdef HAS_ICM20948
-                type = ICM20948;
-                logFoundDevice("ICM20948", (uint8_t)addr.address);
-                break;
-#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);
@@ -635,7 +580,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
     scanPort(port, nullptr, 0);
 }
 
-TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address)
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 {
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;

src/detect/ScanI2CTwoWire.h

@@ -23,12 +23,12 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
 
-    static TwoWire *fetchI2CBus(ScanI2C::DeviceAddress);
-
   protected:
     FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
 

src/gps/GPS.cpp

@@ -38,16 +38,14 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#ifndef GPS_SERIAL_PORT
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#define GPS_SERIAL_PORT Serial1
+#if defined(GPS_SERIAL_PORT)
-#endif
-
-#if defined(ARCH_NRF52)
-Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
 HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#else
+HardwareSerial *GPS::_serial_gps = &Serial1;
+#endif
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -242,9 +240,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(debugmsg.c_str());
-#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -252,6 +247,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
+#ifdef GPS_DEBUG
+                    LOG_DEBUG(debugmsg.c_str());
+#endif
                 }
             }
         }
@@ -496,6 +494,17 @@ bool GPS::setup()
     if (!didSerialInit) {
         int msglen = 0;
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
+#ifdef TRACKER_T1000_E
+            // add power up/down strategy, improve ag3335 detection success
+            digitalWrite(PIN_GPS_EN, LOW);
+            delay(500);
+            digitalWrite(GPS_VRTC_EN, LOW);
+            delay(1000);
+            digitalWrite(GPS_VRTC_EN, HIGH);
+            delay(500);
+            digitalWrite(PIN_GPS_EN, HIGH);
+            delay(1000);
+#endif
             if (probeTries < GPS_PROBETRIES) {
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
@@ -1277,24 +1286,6 @@ GnssModel_t GPS::probe(int serialSpeed)
         memset(&ublox_info, 0, sizeof(ublox_info));
         delay(100);
 
-#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
-        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-        delay(10);
-        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
-
-        // attempt to detect the chip based on boot messages
-        std::vector<ChipInfo> passive_detect = {
-            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
-            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
-            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
-            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
-        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
-        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
-            return detectedDriver;
-        }
-#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1493,12 +1484,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
-#ifdef GPS_DEBUG
-                        LOG_DEBUG(response);
-#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1506,9 +1497,6 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1527,7 +1515,10 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-
+#if HAS_GPS && !defined(ARCH_ESP32)
+    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
+    _tx_gpio = 1;
+#endif
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1592,6 +1583,8 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
+    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1601,28 +1594,16 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
-        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
-
 //  ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
+        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
+        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
-        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_NRF52)
-        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_STM32WL)
-        _serial_gps->setTx(new_gps->tx_gpio);
-        _serial_gps->setRx(new_gps->rx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_PORTDUINO)
-        // Portduino can't set the GPS pins directly.
-        _serial_gps->begin(GPS_BAUDRATE);
 #else
-#error Unsupported architecture!
+        _serial_gps->begin(GPS_BAUDRATE);
 #endif
     }
     return new_gps;
@@ -1689,12 +1670,8 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-// In a GPS_DEBUG build we want to log all of these. In production, we only care if there are many of them.
+        LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
-#ifndef GPS_DEBUG
+                 reader.failedChecksum());
-        if (reader.failedChecksum() > 4)
-#endif
-            LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
-                     reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
 #endif

src/gps/GPS.h

@@ -194,8 +194,6 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
-#elif defined(ARCH_NRF52)
-    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,11 +112,7 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
-#ifdef MUZI_BASE
-        ArtronShop_RX8130CE rtc(&Wire1);
-#else
         ArtronShop_RX8130CE rtc(&Wire);
-#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -249,11 +245,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
-#ifdef MUZI_BASE
-            ArtronShop_RX8130CE rtc(&Wire1);
-#else
             ArtronShop_RX8130CE rtc(&Wire);
-#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
@@ -318,7 +310,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -327,7 +319,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
+            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/graphics/Screen.cpp

@@ -69,11 +69,7 @@ using graphics::Emote;
 using graphics::emotes;
 using graphics::numEmotes;
 
-#if USE_TFTDISPLAY
 extern uint16_t TFT_MESH;
-#else
-uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
-#endif
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiAPClient.h"
@@ -328,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
+#if defined(ESP_PLATFORM) && defined(USE_ST7789)
 SPIClass SPI1(HSPI);
 #endif
 
@@ -360,13 +356,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
-#elif defined(USE_ST7796)
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
-#ifdef ESP_PLATFORM
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
-                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
-#else
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-#endif
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -379,7 +369,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -409,12 +399,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     isAUTOOled = true;
 #endif
 
-#if defined(USE_ST7789)
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
-#elif defined(USE_ST7796)
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
-
     ui = new OLEDDisplayUi(dispdev);
     cmdQueue.setReader(this);
 }
@@ -451,14 +435,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
-#if defined(MUZI_BASE)
-            dispdev->init();
-            dispdev->setBrightness(brightness);
-            dispdev->flipScreenVertically();
-            dispdev->resetDisplay();
-            digitalWrite(SCREEN_12V_ENABLE, HIGH);
-            delay(100);
-#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -467,7 +443,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness > 0)
+            if (uiconfig.screen_brightness == 1)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
@@ -490,15 +466,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
-#endif
-#ifdef USE_ST7796
-            ui->init();
-#ifdef ESP_PLATFORM
-            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
-#else
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
-#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -517,10 +484,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
-
-#ifdef SCREEN_12V_ENABLE
-            digitalWrite(SCREEN_12V_ENABLE, LOW);
-#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -537,21 +500,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
-#ifdef USE_ST7796
-            SPI1.end();
-#if defined(ARCH_ESP32)
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, LOW);
-            pinMode(ST7796_RESET, ANALOG);
-            pinMode(ST7796_RS, ANALOG);
-            pinMode(ST7796_NSS, ANALOG);
-#else
-            nrf_gpio_cfg_default(VTFT_LEDA);
-            nrf_gpio_cfg_default(ST7796_RESET);
-            nrf_gpio_cfg_default(ST7796_RS);
-            nrf_gpio_cfg_default(ST7796_NSS);
-#endif
-#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -586,7 +534,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
+#ifdef USE_SH1107_128_64
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -594,13 +542,6 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
-#if defined(MUZI_BASE)
-    dispdev->delayPoweron = true;
-#endif
-#if defined(USE_ST7796) && defined(TFT_MESH)
-    // Custom text color, if defined in variant.h
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -660,12 +601,10 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif defined(USE_ST7796)
-        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -698,7 +637,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -1551,7 +1490,7 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
                     strcpy(banner, "Alert Received");
                 }
                 screen->showSimpleBanner(banner, 3000);
-            } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
+            } else if (!channel.settings.mute) {
                 if (longName && longName[0]) {
 #if defined(M5STACK_UNITC6L)
                     strcpy(banner, "New Message");
@@ -1610,7 +1549,6 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
 int Screen::handleInputEvent(const InputEvent *event)
 {
-    LOG_INPUT("Screen Input event %u! kb %u", event->inputEvent, event->kbchar);
     if (!screenOn)
         return 0;
 

src/graphics/Screen.h

@@ -83,8 +83,6 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
-#elif defined(USE_ST7796)
-#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -251,8 +249,6 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
-    bool isScreenOn() { return screenOn; }
-
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/ScreenFonts.h

@@ -73,8 +73,7 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/SharedUIDisplay.cpp

@@ -1,10 +1,6 @@
-#include "configuration.h"
-#if HAS_SCREEN
-#include "MeshService.h"
-#include "RTC.h"
-#include "draw/NodeListRenderer.h"
-#include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "RTC.h"
+#include "graphics/ScreenFonts.h"
 #include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
@@ -17,12 +13,6 @@ namespace graphics
 
 void determineResolution(int16_t screenheight, int16_t screenwidth)
 {
-
-#ifdef FORCE_LOW_RES
-    isHighResolution = false;
-    return;
-#endif
-
     if (screenwidth > 128) {
         isHighResolution = true;
     }
@@ -30,6 +20,11 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
     if (screenwidth > 128 && screenheight <= 64) {
         isHighResolution = false;
     }
+
+    // Special case for Heltec Wireless Tracker v1.1
+    if (screenwidth == 160 && screenheight == 80) {
+        isHighResolution = false;
+    }
 }
 
 // === Shared External State ===
@@ -401,43 +396,6 @@ const int *getTextPositions(OLEDDisplay *display)
     return textPositions;
 }
 
-// *************************
-// * Common Footer Drawing *
-// *************************
-void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
-{
-    bool drawConnectionState = false;
-    if (service->api_state == service->STATE_BLE || service->api_state == service->STATE_WIFI ||
-        service->api_state == service->STATE_SERIAL || service->api_state == service->STATE_PACKET ||
-        service->api_state == service->STATE_HTTP || service->api_state == service->STATE_ETH) {
-        drawConnectionState = true;
-    }
-
-    if (drawConnectionState) {
-        if (isHighResolution) {
-            const int scale = 2;
-            const int bytesPerRow = (connection_icon_width + 7) / 8;
-            int iconX = 0;
-            int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
-
-            for (int yy = 0; yy < connection_icon_height; ++yy) {
-                const uint8_t *rowPtr = connection_icon + yy * bytesPerRow;
-                for (int xx = 0; xx < connection_icon_width; ++xx) {
-                    const uint8_t byteVal = pgm_read_byte(rowPtr + (xx >> 3));
-                    const uint8_t bitMask = 1U << (xx & 7); // XBM is LSB-first
-                    if (byteVal & bitMask) {
-                        display->fillRect(iconX + xx * scale, iconY + yy * scale, scale, scale);
-                    }
-                }
-            }
-
-        } else {
-            display->drawXbm(0, SCREEN_HEIGHT - connection_icon_height, connection_icon_width, connection_icon_height,
-                             connection_icon);
-        }
-    }
-}
-
 bool isAllowedPunctuation(char c)
 {
     const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";
@@ -465,4 +423,3 @@ std::string sanitizeString(const std::string &input)
 }
 
 } // namespace graphics
-#endif

src/graphics/SharedUIDisplay.h

@@ -52,9 +52,6 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
                       bool show_date = false);
 
-// Shared battery/time/mail header
-void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y);
-
 const int *getTextPositions(OLEDDisplay *display);
 
 bool isAllowedPunctuation(char c);

src/graphics/TFTDisplay.cpp

@@ -1,6 +1,5 @@
 #include "configuration.h"
 #include "main.h"
-#if USE_TFTDISPLAY
 
 #if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -124,11 +123,6 @@ static void rak14014_tpIntHandle(void)
     _rak14014_touch_int = true;
 }
 
-#elif defined(HACKADAY_COMMUNICATOR)
-#include <Arduino_GFX_Library.h>
-Arduino_DataBus *bus = nullptr;
-Arduino_GFX *tft = nullptr;
-
 #elif defined(ST72xx_DE)
 #include <LovyanGFX.hpp>
 #include <TCA9534.h>
@@ -428,57 +422,7 @@ static LGFX *tft = nullptr;
 
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#ifdef HELTEC_V4_TFT
-#include "chsc6x.h"
-#include "lgfx/v1/Touch.hpp"
-namespace lgfx
-{
-inline namespace v1
-{
-class TOUCH_CHSC6X : public ITouch
-{
-  public:
-    TOUCH_CHSC6X(void)
-    {
-        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
-        _cfg.x_min = 0;
-        _cfg.x_max = 240;
-        _cfg.y_min = 0;
-        _cfg.y_max = 320;
-    };
 
-    bool init(void) override
-    {
-        if (chsc6xTouch == nullptr) {
-            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
-        }
-        chsc6xTouch->chsc6x_init();
-        return true;
-    };
-
-    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
-    {
-        uint16_t raw_x, raw_y;
-        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
-            tp[0].x = 320 - 1 - raw_y;
-            tp[0].y = 240 - 1 - raw_x;
-            tp[0].size = 1;
-            tp[0].id = 1;
-            return 1;
-        }
-        tp[0].size = 0;
-        return 0;
-    };
-
-    void wakeup(void) override{};
-    void sleep(void) override{};
-
-  private:
-    chsc6x *chsc6xTouch = nullptr;
-};
-} // namespace v1
-} // namespace lgfx
-#endif
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -487,8 +431,6 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
-#elif defined(HELTEC_V4_TFT)
-    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -522,9 +464,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
@@ -1139,6 +1081,9 @@ static LGFX *tft = nullptr;
 
 #endif
 
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1274,15 +1219,12 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-#if defined(HACKADAY_COMMUNICATOR)
+
-            tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
-                                      (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
-#else
             // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
             // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
             tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
                           &linePixelBuffer[x_FirstPixelUpdate]);
-#endif
+
             somethingChanged = true;
         }
         y++;
@@ -1346,8 +1288,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         display(true);
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOn();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1360,8 +1300,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
+#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
-    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -1373,8 +1312,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         tft->clear();
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOff();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1387,7 +1324,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(false); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
         tft->setBrightness(0);
 #endif
         break;
@@ -1403,7 +1340,7 @@ void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
 #ifdef RAK14014
     // todo
-#elif !defined(HACKADAY_COMMUNICATOR)
+#else
     tft->setBrightness(_brightness);
     LOG_DEBUG("Brightness is set to value: %i ", _brightness);
 #endif
@@ -1421,7 +1358,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -1440,7 +1377,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -1459,12 +1396,6 @@ bool TFTDisplay::connect()
     LOG_INFO("Do TFT init");
 #ifdef RAK14014
     tft = new TFT_eSPI;
-#elif defined(HACKADAY_COMMUNICATOR)
-    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
-    tft = new Arduino_NV3007(bus, 40, 0 /* rotation */, false /* IPS */, 142 /* width */, 428 /* height */, 12 /* col offset 1 */,
-                             0 /* row offset 1 */, 14 /* col offset 2 */, 0 /* row offset 2 */, nv3007_279_init_operations,
-                             sizeof(nv3007_279_init_operations));
-
 #else
     tft = new LGFX;
 #endif
@@ -1475,15 +1406,8 @@ bool TFTDisplay::connect()
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
 #endif
-#ifdef HACKADAY_COMMUNICATOR
+
-    bool beginStatus = tft->begin();
-    if (beginStatus)
-        LOG_DEBUG("TFT Success!");
-    else
-        LOG_ERROR("TFT Fail!");
-#else
     tft->init();
-#endif
 
 #if defined(M5STACK)
     tft->setRotation(0);
@@ -1516,4 +1440,4 @@ bool TFTDisplay::connect()
     return true;
 }
 
-#endif // USE_TFTDISPLAY
+#endif

src/graphics/TimeFormatters.cpp

@@ -101,23 +101,3 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
-
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
-{
-    uint32_t days = uptimeMillis / 86400000;
-    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
-    uint32_t mins = (uptimeMillis % 3600000) / 60000;
-    uint32_t secs = (uptimeMillis % 60000) / 1000;
-
-    if (days) {
-        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
-    } else if (hours) {
-        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
-    } else if (!includeSecs) {
-        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
-    } else if (mins) {
-        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
-    } else {
-        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
-    }
-}

src/graphics/TimeFormatters.h

@@ -24,10 +24,3 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
-
-/**
- * Get a compact human-readable string that only shows the largest non-zero time components.
- * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
- * will display as "1d 2h".
- */
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/VirtualKeyboard.cpp

@@ -1,6 +1,5 @@
-#include "configuration.h"
-#if HAS_SCREEN
 #include "VirtualKeyboard.h"
+#include "configuration.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -506,9 +505,6 @@ void VirtualKeyboard::drawKey(OLEDDisplay *display, const VirtualKey &key, bool
             centeredTextY -= 1;
         }
     }
-#ifdef MUZI_BASE // Correct issue with character vertical position on MUZI_BASE
-    centeredTextY -= 2;
-#endif
     display->drawString(textX, centeredTextY, keyText.c_str());
 }
 
@@ -740,4 +736,3 @@ bool VirtualKeyboard::isTimedOut() const
 }
 
 } // namespace graphics
-#endif

src/graphics/draw/ClockRenderer.cpp

@@ -194,12 +194,17 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
+#ifdef T_WATCH_S3
+    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
+        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
+    }
+#endif
+
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     char timeString[16];
     int hour = 0;
     int minute = 0;
     int second = 0;
-
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -210,11 +215,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     bool isPM = hour >= 12;
+    // hour = hour > 12 ? hour - 12 : hour;
     if (config.display.use_12h_clock) {
         hour %= 12;
-        if (hour == 0) {
+        if (hour == 0)
             hour = 12;
-        }
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -224,56 +229,24 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     char secondString[8];
     snprintf(secondString, sizeof(secondString), "%02d", second);
 
-    static bool scaleInitialized = false;
+#ifdef T_WATCH_S3
-    static float scale = 0.75f;
+    float scale = 1.5;
-    static float segmentWidth = SEGMENT_WIDTH * 0.75f;
+#elif defined(CHATTER_2)
-    static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
+    float scale = 1.1;
-
+#else
-    if (!scaleInitialized) {
+    float scale = 0.75;
-        float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
+    if (isHighResolution) {
-        float max_scale = 3.5f;                 // Safety limit to avoid runaway scaling
+        scale = 1.5;
-        float step = 0.05f;                     // Step increment per iteration
-
-        float target_width = display->getWidth() * screenwidth_target_ratio;
-        float target_height =
-            display->getHeight() -
-            (isHighResolution
-                 ? 46
-                 : 33); // Be careful adjusting this number, we have to account for header and the text under the time
-
-        float calculated_width_size = 0.0f;
-        float calculated_height_size = 0.0f;
-
-        while (true) {
-            segmentWidth = SEGMENT_WIDTH * scale;
-            segmentHeight = SEGMENT_HEIGHT * scale;
-
-            calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
-            calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
-
-            if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
-                break;
-            }
-
-            scale += step;
-        }
-
-        // If we overshot width, back off one step and recompute segment sizes
-        if (calculated_width_size > target_width || calculated_height_size > target_height) {
-            scale -= step;
-            segmentWidth = SEGMENT_WIDTH * scale;
-            segmentHeight = SEGMENT_HEIGHT * scale;
-        }
-
-        scaleInitialized = true;
     }
+#endif
 
-    size_t len = strlen(timeString);
+    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
+    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
 
     // calculate hours:minutes string width
-    uint16_t timeStringWidth = len * 5; // base spacing between characters
+    uint16_t timeStringWidth = strlen(timeString) * 5;
 
-    for (size_t i = 0; i < len; i++) {
+    for (uint8_t i = 0; i < strlen(timeString); i++) {
         char character = timeString[i];
 
         if (character == ':') {
@@ -284,21 +257,19 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
+
     uint16_t startingHourMinuteTextX = hourMinuteTextX;
 
-    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
 
     // iterate over characters in hours:minutes string and draw segmented characters
-    for (size_t i = 0; i < len; i++) {
+    for (uint8_t i = 0; i < strlen(timeString); i++) {
         char character = timeString[i];
 
         if (character == ':') {
             drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
 
             hourMinuteTextX += segmentHeight + 6;
-            if (scale >= 2.0f) {
-                hourMinuteTextX += (uint16_t)(4.5f * scale);
-            }
         } else {
             drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
 
@@ -308,27 +279,34 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hourMinuteTextX += 5;
     }
 
-    // draw seconds string + AM/PM
+    // draw seconds string
     display->setFont(FONT_SMALL);
     int xOffset = (isHighResolution) ? 0 : -1;
     if (hour >= 10) {
         xOffset += (isHighResolution) ? 32 : 18;
     }
-
+    int yOffset = (isHighResolution) ? 3 : 1;
+#ifdef SENSECAP_INDICATOR
+    yOffset -= 3;
+#endif
+#ifdef T_DECK
+    yOffset -= 5;
+#endif
     if (config.display.use_12h_clock) {
-        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
+                            isPM ? "pm" : "am");
     }
 
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
-    if (scale >= 2.0f) {
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
-        xOffset -= (int)(4.5f * scale);
-    }
-    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
                         secondString);
 #endif
+}
 
-    graphics::drawCommonFooter(display, x, y);
+void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
 }
 
 // Draw an analog clock
@@ -341,6 +319,11 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
+#ifdef T_WATCH_S3
+    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
+        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
+    }
+#endif
     // clock face center coordinates
     int16_t centerX = display->getWidth() / 2;
     int16_t centerY = display->getHeight() / 2;
@@ -533,7 +516,6 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         display->drawLine(centerX, centerY, secondX, secondY);
 #endif
     }
-    graphics::drawCommonFooter(display, x, y);
 }
 
 } // namespace ClockRenderer

src/graphics/draw/ClockRenderer.h

@@ -24,6 +24,7 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
 
 // UI elements for clock displays
 // void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
+void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
 
 } // namespace ClockRenderer
 

src/graphics/draw/CompassRenderer.cpp

@@ -1,5 +1,3 @@
-#include "configuration.h"
-#if HAS_SCREEN
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
@@ -137,4 +135,3 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
-#endif

src/graphics/draw/DebugRenderer.cpp

@@ -3,7 +3,6 @@
 #include "../Screen.h"
 #include "DebugRenderer.h"
 #include "FSCommon.h"
-#include "MeshService.h"
 #include "NodeDB.h"
 #include "Throttle.h"
 #include "UIRenderer.h"
@@ -11,7 +10,6 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
-#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -97,7 +95,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -109,8 +107,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -126,7 +123,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -226,8 +223,6 @@ void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, i
 
     display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
 
-    graphics::drawCommonFooter(display, x, y);
-
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
@@ -508,7 +503,6 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
                         chUtilPercentage);
 #endif
-    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -648,48 +642,27 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
 
-    display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
+    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-
+#if !defined(M5STACK_UNITC6L)
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
+        line += 1;
         char uptimeStr[32] = "";
-        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
+        uint32_t uptime = millis() / 1000;
+        uint32_t days = uptime / 86400;
+        uint32_t hours = (uptime % 86400) / 3600;
+        uint32_t mins = (uptime % 3600) / 60;
+        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
+        if (days)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
+        else if (hours)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
+        else
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
-        display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
+        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
     }
-
+#endif
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
-        char api_state[32] = "";
-        const char *clientWord = nullptr;
-
-        // Determine if narrow or wide screen
-        if (isHighResolution) {
-            clientWord = "Client";
-        } else {
-            clientWord = "App";
-        }
-        snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
-
-        if (service->api_state == service->STATE_BLE) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
-        } else if (service->api_state == service->STATE_WIFI) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
-        } else if (service->api_state == service->STATE_SERIAL) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
-        } else if (service->api_state == service->STATE_PACKET) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
-        } else if (service->api_state == service->STATE_HTTP) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
-        } else if (service->api_state == service->STATE_ETH) {
-            snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
-        }
-        if (api_state[0] != '\0') {
-            display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
-                                api_state);
-        }
-    }
-
-    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -721,4 +694,4 @@ void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int1
 
 } // namespace DebugRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/MenuHandler.cpp

@@ -119,7 +119,6 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             auto changes = SEGMENT_CONFIG;
 
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
-#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -140,7 +139,6 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
-#endif
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {
@@ -517,7 +515,7 @@ void menuHandler::homeBaseMenu()
             }
             saveUIConfig();
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness > 0) {
+            if (uiconfig.screen_brightness == 1) {
                 uiconfig.screen_brightness = 0;
                 io.digitalWrite(PCA_PIN_EINK_EN, LOW);
             } else {
@@ -576,26 +574,27 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, WiFiToggle, PowerMenu, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, FrameToggles, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-    optionsArray[options] = "Display Options";
+#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
+    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+    optionsArray[options] = "Screen Options";
     optionsEnumArray[options++] = ScreenOptions;
+#endif
 
+    optionsArray[options] = "Frame Visiblity Toggle";
+    optionsEnumArray[options++] = FrameToggles;
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Bluetooth";
 #else
     optionsArray[options] = "Bluetooth Toggle";
 #endif
     optionsEnumArray[options++] = Bluetooth;
-#if HAS_WIFI && !defined(ARCH_PORTDUINO)
-    optionsArray[options] = "WiFi Toggle";
-    optionsEnumArray[options++] = WiFiToggle;
-#endif
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Power";
 #else
@@ -627,17 +626,15 @@ void menuHandler::systemBaseMenu()
         } else if (selected == PowerMenu) {
             menuHandler::menuQueue = menuHandler::power_menu;
             screen->runNow();
+        } else if (selected == FrameToggles) {
+            menuHandler::menuQueue = menuHandler::FrameToggles;
+            screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
         } else if (selected == Bluetooth) {
             menuQueue = bluetooth_toggle_menu;
             screen->runNow();
-#if HAS_WIFI && !defined(ARCH_PORTDUINO)
-        } else if (selected == WiFiToggle) {
-            menuQueue = wifi_toggle_menu;
-            screen->runNow();
-#endif
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -765,52 +762,19 @@ void menuHandler::nodeListMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::nodeNameLengthMenu()
-{
-    enum OptionsNumbers { Back, Long, Short };
-    static const char *optionsArray[] = {"Back", "Long", "Short"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Node Name Length";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Long) {
-            // Set names to long
-            LOG_INFO("Setting names to long");
-            config.display.use_long_node_name = true;
-        } else if (selected == Short) {
-            // Set names to short
-            LOG_INFO("Setting names to short");
-            config.display.use_long_node_name = false;
-        } else if (selected == Back) {
-            menuQueue = screen_options_menu;
-            screen->runNow();
-        }
-    };
-    bannerOptions.InitialSelected = config.display.use_long_node_name == true ? 1 : 2;
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::resetNodeDBMenu()
 {
-    static const char *optionsArray[] = {"Back", "Reset All", "Preserve Favorites"};
+    static const char *optionsArray[] = {"Back", "Confirm"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Confirm Reset NodeDB";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
+    bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
-            disableBluetooth();
-            screen->setFrames(Screen::FOCUS_DEFAULT);
-        }
         if (selected == 1) {
+            disableBluetooth();
             LOG_INFO("Initiate node-db reset");
             nodeDB->resetNodes();
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-        } else if (selected == 2) {
-            LOG_INFO("Initiate node-db reset but keeping favorites");
-            nodeDB->resetNodes(1);
-            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -946,9 +910,7 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 0)
+        if (selected == 1 || selected == 2) {
-            return;
-        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -1047,8 +1009,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
-    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -1288,28 +1249,19 @@ void menuHandler::wifiBaseMenu()
 
 void menuHandler::wifiToggleMenu()
 {
-    enum optionsNumbers { Back, Wifi_disable, Wifi_enable };
+    enum optionsNumbers { Back, Wifi_toggle };
 
-    static const char *optionsArray[] = {"Back", "WiFi Disabled", "WiFi Enabled"};
+    static const char *optionsArray[] = {"Back", "Disable"};
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "WiFi Actions";
+    bannerOptions.message = "Disable Wifi and\nEnable Bluetooth?";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
+    bannerOptions.optionsCount = 2;
-    if (config.network.wifi_enabled == true)
-        bannerOptions.InitialSelected = 2;
-    else
-        bannerOptions.InitialSelected = 1;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Wifi_disable) {
+        if (selected == Wifi_toggle) {
             config.network.wifi_enabled = false;
             config.bluetooth.enabled = true;
             service->reloadConfig(SEGMENT_CONFIG);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-        } else if (selected == Wifi_enable) {
-            config.network.wifi_enabled = true;
-            config.bluetooth.enabled = false;
-            service->reloadConfig(SEGMENT_CONFIG);
-            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1352,16 +1304,11 @@ void menuHandler::screenOptionsMenu()
     hasSupportBrightness = false;
 #endif
 
-    enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor, FrameToggles, DisplayUnits };
+    enum optionsNumbers { Back, Brightness, ScreenColor };
-    static const char *optionsArray[5] = {"Back"};
+    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[5] = {Back};
+    static int optionsEnumArray[4] = {Back};
     int options = 1;
 
-#if defined(T_DECK) || defined(T_LORA_PAGER) || defined(HACKADAY_COMMUNICATOR)
-    optionsArray[options] = "Show Long/Short Name";
-    optionsEnumArray[options++] = NodeNameLength;
-#endif
-
     // Only show brightness for B&W displays
     if (hasSupportBrightness) {
         optionsArray[options] = "Brightness";
@@ -1369,20 +1316,13 @@ void menuHandler::screenOptionsMenu()
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) ||          \
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
-    HAS_TFT || defined(HACKADAY_COMMUNICATOR)
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
-    optionsArray[options] = "Frame Visibility Toggle";
-    optionsEnumArray[options++] = FrameToggles;
-
-    optionsArray[options] = "Display Units";
-    optionsEnumArray[options++] = DisplayUnits;
-
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Display Options";
+    bannerOptions.message = "Screen Options";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1393,15 +1333,6 @@ void menuHandler::screenOptionsMenu()
         } else if (selected == ScreenColor) {
             menuHandler::menuQueue = menuHandler::tftcolormenupicker;
             screen->runNow();
-        } else if (selected == NodeNameLength) {
-            menuHandler::menuQueue = menuHandler::node_name_length_menu;
-            screen->runNow();
-        } else if (selected == FrameToggles) {
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == DisplayUnits) {
-            menuHandler::menuQueue = menuHandler::DisplayUnits;
-            screen->runNow();
         } else {
             menuQueue = system_base_menu;
             screen->runNow();
@@ -1500,8 +1431,6 @@ void menuHandler::FrameToggles_menu()
         lora,
         clock,
         show_favorites,
-        show_telemetry,
-        show_power,
         enumEnd
     };
     static const char *optionsArray[enumEnd] = {"Finish"};
@@ -1540,12 +1469,6 @@ void menuHandler::FrameToggles_menu()
     optionsArray[options] = screen->isFrameHidden("show_favorites") ? "Show Favorites" : "Hide Favorites";
     optionsEnumArray[options++] = show_favorites;
 
-    optionsArray[options] = moduleConfig.telemetry.environment_screen_enabled ? "Hide Telemetry" : "Show Telemetry";
-    optionsEnumArray[options++] = show_telemetry;
-
-    optionsArray[options] = moduleConfig.telemetry.power_screen_enabled ? "Hide Power" : "Show Power";
-    optionsEnumArray[options++] = show_power;
-
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Show/Hide Frames";
     bannerOptions.optionsArrayPtr = optionsArray;
@@ -1600,42 +1523,6 @@ void menuHandler::FrameToggles_menu()
             screen->toggleFrameVisibility("show_favorites");
             menuHandler::menuQueue = menuHandler::FrameToggles;
             screen->runNow();
-        } else if (selected == show_telemetry) {
-            moduleConfig.telemetry.environment_screen_enabled = !moduleConfig.telemetry.environment_screen_enabled;
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == show_power) {
-            moduleConfig.telemetry.power_screen_enabled = !moduleConfig.telemetry.power_screen_enabled;
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::DisplayUnits_menu()
-{
-    enum optionsNumbers { Back, MetricUnits, ImperialUnits };
-
-    static const char *optionsArray[] = {"Back", "Metric", "Imperial"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = " Select display units";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
-    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL)
-        bannerOptions.InitialSelected = 2;
-    else
-        bannerOptions.InitialSelected = 1;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == MetricUnits) {
-            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_METRIC;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == ImperialUnits) {
-            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else {
-            menuHandler::menuQueue = menuHandler::screen_options_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1707,9 +1594,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case brightness_picker:
         BrightnessPickerMenu();
         break;
-    case node_name_length_menu:
-        nodeNameLengthMenu();
-        break;
     case reboot_menu:
         rebootMenu();
         break;
@@ -1755,9 +1639,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case FrameToggles:
         FrameToggles_menu();
         break;
-    case DisplayUnits:
-        DisplayUnits_menu();
-        break;
     case throttle_message:
         screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
         break;
@@ -1772,4 +1653,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/MenuHandler.h

@@ -43,9 +43,7 @@ class menuHandler
         key_verification_final_prompt,
         trace_route_menu,
         throttle_message,
-        node_name_length_menu,
+        FrameToggles
-        FrameToggles,
-        DisplayUnits
     };
     static screenMenus menuQueue;
 
@@ -87,9 +85,7 @@ class menuHandler
     static void notificationsMenu();
     static void screenOptionsMenu();
     static void powerMenu();
-    static void nodeNameLengthMenu();
     static void FrameToggles_menu();
-    static void DisplayUnits_menu();
     static void textMessageMenu();
 
   private:

src/graphics/draw/MessageRenderer.cpp

@@ -213,7 +213,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #else
         display->drawString(center_text, getTextPositions(display)[2], messageString);
 #endif
-        graphics::drawCommonFooter(display, x, y);
         return;
     }
 
@@ -424,7 +423,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // Draw header at the end to sort out overlapping elements
     graphics::drawCommonHeader(display, x, y, titleStr);
 #endif
-    graphics::drawCommonFooter(display, x, y);
 }
 
 std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerStr, const char *messageBuf, int textWidth)

src/graphics/draw/NodeListRenderer.cpp

@@ -53,56 +53,28 @@ static int scrollIndex = 0;
 // Utility Functions
 // =============================
 
-const char *getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node)
+const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
 {
-    const char *name = NULL;
     static char nodeName[16] = "?";
-    if (config.display.use_long_node_name == true) {
+    if (node->has_user && strlen(node->user.short_name) > 0) {
-        if (node->has_user && strlen(node->user.long_name) > 0) {
+        bool valid = true;
-            name = node->user.long_name;
+        const char *name = node->user.short_name;
+        for (size_t i = 0; i < strlen(name); i++) {
+            uint8_t c = (uint8_t)name[i];
+            if (c < 32 || c > 126) {
+                valid = false;
+                break;
+            }
+        }
+        if (valid) {
+            strncpy(nodeName, name, sizeof(nodeName) - 1);
+            nodeName[sizeof(nodeName) - 1] = '\0';
         } else {
             snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
         }
-    } else {
-        if (node->has_user && strlen(node->user.short_name) > 0) {
-            name = node->user.short_name;
-        } else {
-            snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
-        }
-    }
-
-    // Use sanitizeString() function and copy directly into nodeName
-    std::string sanitized_name = sanitizeString(name ? name : "");
-
-    if (!sanitized_name.empty()) {
-        strncpy(nodeName, sanitized_name.c_str(), sizeof(nodeName) - 1);
-        nodeName[sizeof(nodeName) - 1] = '\0';
     } else {
         snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
     }
-
-    if (config.display.use_long_node_name == true) {
-        int availWidth = (SCREEN_WIDTH / 2) - 65;
-        if (availWidth < 0)
-            availWidth = 0;
-
-        size_t origLen = strlen(nodeName);
-        while (nodeName[0] && display->getStringWidth(nodeName) > availWidth) {
-            nodeName[strlen(nodeName) - 1] = '\0';
-        }
-
-        // If we actually truncated, append "..." (ensure space remains in buffer)
-        if (strlen(nodeName) < origLen) {
-            size_t len = strlen(nodeName);
-            size_t maxLen = sizeof(nodeName) - 4; // 3 for "..." and 1 for '\0'
-            if (len > maxLen) {
-                nodeName[maxLen] = '\0';
-                len = maxLen;
-            }
-            strcat(nodeName, "...");
-        }
-    }
-
     return nodeName;
 }
 
@@ -169,7 +141,7 @@ void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
 
-    const char *nodeName = getSafeNodeName(display, node);
+    const char *nodeName = getSafeNodeName(node);
 
     char timeStr[10];
     uint32_t seconds = sinceLastSeen(node);
@@ -214,7 +186,7 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int barsXOffset = columnWidth - barsOffset;
 
-    const char *nodeName = getSafeNodeName(display, node);
+    const char *nodeName = getSafeNodeName(node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -258,7 +230,7 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(display, node);
+    const char *nodeName = getSafeNodeName(node);
     char distStr[10] = "";
 
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -353,7 +325,7 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     // Adjust max text width depending on column and screen width
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(display, node);
+    const char *nodeName = getSafeNodeName(node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -384,11 +356,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
     float bearingToNode = RAD_TO_DEG * bearing;
     float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
+    float angle = relativeBearing * DEG_TO_RAD;
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
     CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
-    float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
 
     // Point of the arrow
@@ -425,12 +397,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
-    bool locationScreen = false;
-
-    if (strcmp(title, "Bearings") == 0)
-        locationScreen = true;
-    else if (strcmp(title, "Distance") == 0)
-        locationScreen = true;
 #if defined(M5STACK_UNITC6L)
     int columnWidth = display->getWidth();
 #else
@@ -446,7 +412,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 
     int totalEntries = nodeDB->getNumMeshNodes();
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
-    int numskipped = 0;
+
     int visibleNodeRows = totalRowsAvailable;
 #if defined(M5STACK_UNITC6L)
     int totalColumns = 1;
@@ -466,10 +432,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int rowCount = 0;
 
     for (int i = startIndex; i < endIndex; ++i) {
-        if (locationScreen && !nodeDB->getMeshNodeByIndex(i)->has_position) {
-            numskipped++;
-            continue;
-        }
         int xPos = x + (col * columnWidth);
         int yPos = y + yOffset;
         renderer(display, nodeDB->getMeshNodeByIndex(i), xPos, yPos, columnWidth);
@@ -492,9 +454,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         }
     }
 
-    // This should correct the scrollbar
-    totalEntries -= numskipped;
-
 #if !defined(M5STACK_UNITC6L)
     // Draw column separator
     if (shownCount > 0) {
@@ -505,7 +464,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
     const int scrollStartY = y + 3;
     drawScrollbar(display, visibleNodeRows, totalEntries, scrollIndex, 2, scrollStartY);
-    graphics::drawCommonFooter(display, x, y);
 }
 
 // =============================

src/graphics/draw/UIRenderer.cpp

@@ -11,7 +11,6 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
-#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -257,8 +256,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -385,7 +383,17 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
+        uint32_t uptime = node->device_metrics.uptime_seconds;
+        uint32_t days = uptime / 86400;
+        uint32_t hours = (uptime % 86400) / 3600;
+        uint32_t mins = (uptime % 3600) / 60;
+        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
+        if (days)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
+        else if (hours)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
+        else
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -544,7 +552,6 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         // else show nothing
     }
 #endif
-    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -556,7 +563,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
     int line = 1;
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
     // === Header ===
 #if defined(M5STACK_UNITC6L)
@@ -584,8 +590,18 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
+    uint32_t uptime = millis() / 1000;
+    uint32_t days = uptime / 86400;
+    uint32_t hours = (uptime % 86400) / 3600;
+    uint32_t mins = (uptime % 3600) / 60;
+    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
+    if (days)
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
+    else if (hours)
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
+    else
+        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -724,6 +740,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     int yOffset = (isHighResolution) ? 0 : 5;
     std::string longNameStr;
 
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
     if (ourNode && ourNode->has_user && strlen(ourNode->user.long_name) > 0) {
         longNameStr = sanitizeString(ourNode->user.long_name);
     }
@@ -754,7 +771,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
         display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
     }
 #endif
-    graphics::drawCommonFooter(display, x, y);
 }
 
 // Start Functions to write date/time to the screen
@@ -984,7 +1000,24 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     const char *displayLine = ""; // Initialize to empty string by default
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
-    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+    bool usePhoneGPS = (ourNode && nodeDB->hasValidPosition(ourNode) &&
+                        config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED);
+
+    if (usePhoneGPS) {
+        // Phone-provided GPS is active
+        displayLine = "Phone GPS";
+        int yOffset = (isHighResolution) ? 3 : 1;
+        if (isHighResolution) {
+            NodeListRenderer::drawScaledXBitmap16x16(x, getTextPositions(display)[line] + yOffset - 5, imgSatellite_width,
+                                                     imgSatellite_height, imgSatellite, display);
+        } else {
+            display->drawXbm(x + 1, getTextPositions(display)[line] + yOffset, imgSatellite_width, imgSatellite_height,
+                             imgSatellite);
+        }
+        int xOffset = (isHighResolution) ? 6 : 0;
+        display->drawString(x + 11 + xOffset, getTextPositions(display)[line++], displayLine);
+    } else if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+        // GPS disabled / not present
         if (config.position.fixed_position) {
             displayLine = "Fixed GPS";
         } else {
@@ -1030,17 +1063,36 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
+            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
-            char uptimeStr[32];
+            uint32_t days = delta / 86400;
+            uint32_t hours = (delta % 86400) / 3600;
+            uint32_t mins = (delta % 3600) / 60;
+            uint32_t secs = delta % 60;
+
+            char buf[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
+            if (days > 0) {
+                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
+            } else if (hours > 0) {
+                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
+            } else {
+                snprintf(buf, sizeof(buf), "Last: %um", mins);
+            }
 #else
             // Non E-Ink: include seconds where useful
-            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
+            if (days > 0) {
+                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
+            } else if (hours > 0) {
+                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
+            } else if (mins > 0) {
+                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
+            } else {
+                snprintf(buf, sizeof(buf), "Last: %us", secs);
+            }
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
+            display->drawString(0, getTextPositions(display)[line++], buf);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1056,7 +1108,9 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
 
         // === Final Row: Altitude ===
         char altitudeLine[32] = {0};
-        int32_t alt = geoCoord.getAltitude();
+        int32_t alt = (strcmp(displayLine, "Phone GPS") == 0 && ourNode && nodeDB->hasValidPosition(ourNode))
+                          ? ourNode->position.altitude
+                          : geoCoord.getAltitude();
         if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
             snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0fft", alt * METERS_TO_FEET);
         } else {
@@ -1148,7 +1202,6 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 #endif
 #endif // HAS_GPS
-    graphics::drawCommonFooter(display, x, y);
 }
 
 #ifdef USERPREFS_OEM_TEXT
@@ -1233,13 +1286,7 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
     if (totalIcons == 0)
         return;
 
-    const int navPadding = isHighResolution ? 24 : 12; // padding per side
+    const size_t iconsPerPage = (SCREEN_WIDTH + spacing) / (iconSize + spacing);
-
-    int usableWidth = SCREEN_WIDTH - (navPadding * 2);
-    if (usableWidth < iconSize)
-        usableWidth = iconSize;
-
-    const size_t iconsPerPage = usableWidth / (iconSize + spacing);
     const size_t currentPage = currentFrame / iconsPerPage;
     const size_t pageStart = currentPage * iconsPerPage;
     const size_t pageEnd = min(pageStart + iconsPerPage, totalIcons);
@@ -1310,47 +1357,6 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
             display->setColor(WHITE);
         }
     }
-
-    // Compact arrow drawer
-    auto drawArrow = [&](bool rightSide) {
-        display->setColor(WHITE);
-
-        const int offset = isHighResolution ? 3 : 1;
-        const int halfH = rectHeight / 2;
-
-        const int top = (y - 2) + (rectHeight - halfH) / 2;
-        const int bottom = top + halfH - 1;
-        const int midY = top + (halfH / 2);
-
-        const int maxW = 4;
-
-        // Determine left X coordinate
-        int baseX = rightSide ? (rectX + rectWidth + offset) : // right arrow
-                        (rectX - offset - 1);                  // left arrow
-
-        for (int yy = top; yy <= bottom; yy++) {
-            int dist = abs(yy - midY);
-            int lineW = maxW - (dist * maxW / (halfH / 2));
-            if (lineW < 1)
-                lineW = 1;
-
-            if (rightSide) {
-                display->drawHorizontalLine(baseX, yy, lineW);
-            } else {
-                display->drawHorizontalLine(baseX - lineW + 1, yy, lineW);
-            }
-        }
-    };
-    // Right arrow
-    if (pageEnd < totalIcons) {
-        drawArrow(true);
-    }
-
-    // Left arrow
-    if (pageStart > 0) {
-        drawArrow(false);
-    }
-
     // Knock the corners off the square
     display->setColor(BLACK);
     display->drawRect(rectX, y - 2, 1, 1);
@@ -1385,4 +1391,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/emotes.cpp

@@ -1,5 +1,3 @@
-#include "configuration.h"
-#if HAS_SCREEN
 #include "emotes.h"
 
 namespace graphics
@@ -18,8 +16,6 @@ const Emote emotes[] = {
     {"\U0001F642", Slightly_Smiling, Slightly_Smiling_width, Slightly_Smiling_height}, // 🙂 Slightly Smiling Face
     {"\U0001F609", Winking_Face, Winking_Face_width, Winking_Face_height},             // 😉 Winking Face
     {"\U0001F601", Grinning_Smiling_Eyes, Grinning_Smiling_Eyes_width, Grinning_Smiling_Eyes_height}, // 😁 Grinning Smiling Eyes
-    {"\U0001F60D", Heart_eyes, Heart_eyes_width, Heart_eyes_height},                                  // 😍 Heart Eyes
-    {"\U0001F970", heart_smile, heart_smile_width, heart_smile_height}, // 🥰 Smiling Face with Hearts
 
     // --- Question/Alert ---
     {"\u2753", question, question_width, question_height}, // ❓ Question Mark
@@ -32,15 +28,11 @@ const Emote emotes[] = {
     {"\U0001F605", haha, haha_width, haha_height},                                              // 😅 Smiling with Sweat
     {"\U0001F604", Grinning_SmilingEyes2, Grinning_SmilingEyes2_width,
      Grinning_SmilingEyes2_height}, // 😄 Grinning Face with Smiling Eyes
-    {"\U0001F62D", Loudly_Crying_Face, Loudly_Crying_Face_width, Loudly_Crying_Face_height}, // 😭 Loudly Crying Face
 
     // --- Gestures and People ---
-    {"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height},             // 👋 Waving Hand
+    {"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height}, // 👋 Waving Hand
-    {"\u270C\uFE0F", peace_sign, peace_sign_width, peace_sign_height},        // ✌️ Victory Hand
+    {"\U0001F920", cowboy, cowboy_width, cowboy_height},          // 🤠 Cowboy Hat Face
-    {"\U0001F596", vulcan_salute, vulcan_salute_width, vulcan_salute_height}, // 🖖 Vulcan Salute
+    {"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height},    // 🎧 Headphones
-    {"\U0001F64F", Praying, Praying_width, Praying_height},                   // 🙏 Praying Hands
-    {"\U0001F920", cowboy, cowboy_width, cowboy_height},                      // 🤠 Cowboy Hat Face
-    {"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height},                // 🎧 Headphones
 
     // --- Weather ---
     {"\u2600", sun, sun_width, sun_height},              // ☀ Sun (without variation selector)
@@ -51,12 +43,8 @@ const Emote emotes[] = {
 
     // --- Misc Faces ---
     {"\U0001F608", devil, devil_width, devil_height}, // 😈 Smiling Face with Horns
-    {"\U0001F921", clown, clown_width, clown_height}, // 🤡 Clown Face
-    {"\U0001F916", robo, robo_width, robo_height},    // 🤖 Robot Face
 
     // --- Hearts (Multiple Unicode Aliases) ---
-    {"\u2665", heart, heart_width, heart_height},       // ♥ Black Heart Suit
-    {"\u2665\uFE0F", heart, heart_width, heart_height}, // ♥️ Black Heart Suit (emoji presentation)
     {"\u2764\uFE0F", heart, heart_width, heart_height}, // ❤️ Red Heart
     {"\U0001F9E1", heart, heart_width, heart_height},   // 🧡 Orange Heart
     {"\U00002763", heart, heart_width, heart_height},   // ❣ Heart Exclamation
@@ -67,167 +55,223 @@ const Emote emotes[] = {
     {"\U0001F498", heart, heart_width, heart_height},   // 💘 Heart with Arrow
 
     // --- Objects ---
-    {"\U0001F4A9", poo, poo_width, poo_height},                   // 💩 Pile of Poo
+    {"\U0001F4A9", poo, poo_width, poo_height},                  // 💩 Pile of Poo
-    {"\U0001F514", bell_icon, bell_icon_width, bell_icon_height}, // 🔔 Bell
+    {"\U0001F514", bell_icon, bell_icon_width, bell_icon_height} // 🔔 Bell
-    {"\U0001F36A", cookie, cookie_width, cookie_height},          // 🍪 Cookie
-    {"\U0001F525", Fire, Fire_width, Fire_height},                // 🔥 Fire
-    {"\u2728", Sparkles, Sparkles_width, Sparkles_height},        // ✨ Sparkles
-    {"\U0001F573\uFE0F", hole, hole_width, hole_height},          // 🕳️ Hole
-    {"\U0001F3B3", bowling, bowling_width, bowling_height}        // 🎳 Bowling
 #endif
 };
 
 const int numEmotes = sizeof(emotes) / sizeof(emotes[0]);
 
 #ifndef EXCLUDE_EMOJI
-const unsigned char thumbup[] PROGMEM = {0x00, 0x03, 0x80, 0x04, 0x80, 0x04, 0x40, 0x04, 0x20, 0x02, 0x18,
+const unsigned char thumbup[] PROGMEM = {
-                                         0x02, 0x06, 0x3F, 0x06, 0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x70,
+    0x00, 0x1C, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x80, 0x09, 0x00, 0x00,
-                                         0x06, 0x40, 0x06, 0x30, 0x08, 0x20, 0xF0, 0x1F, 0x00, 0x00};
+    0xC0, 0x08, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00,
+    0x0C, 0xCE, 0x7F, 0x00, 0x04, 0x20, 0x80, 0x00, 0x02, 0x20, 0x80, 0x00, 0x02, 0x60, 0xC0, 0x00, 0x01, 0xF8, 0xFF, 0x01,
+    0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0x18, 0x80, 0x00,
+    0x02, 0x30, 0xC0, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x38, 0x20, 0x10, 0x00, 0xE0, 0xCF, 0x1F, 0x00,
+};
 
-const unsigned char thumbdown[] PROGMEM = {0xF0, 0x1F, 0x08, 0x20, 0x06, 0x30, 0x06, 0x40, 0x06, 0x70, 0x06,
+const unsigned char thumbdown[] PROGMEM = {
-                                           0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x3F, 0x18, 0x02, 0x20, 0x02,
+    0xE0, 0xCF, 0x1F, 0x00, 0x38, 0x20, 0x10, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x02, 0x30, 0xC0, 0x00,
-                                           0x40, 0x04, 0x80, 0x04, 0x80, 0x04, 0x00, 0x03, 0x00, 0x00};
+    0x01, 0x18, 0x80, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01,
+    0x01, 0xF8, 0xFF, 0x01, 0x02, 0x60, 0xC0, 0x00, 0x02, 0x20, 0x80, 0x00, 0x04, 0x20, 0x80, 0x00, 0x0C, 0xCE, 0x7F, 0x00,
+    0x18, 0x02, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
+    0x80, 0x09, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00,
+};
 
-const unsigned char Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char Smiling_Eyes[] PROGMEM = {
-                                              0x4A, 0x02, 0x40, 0x02, 0x40, 0x22, 0x44, 0x22, 0x44, 0xC2, 0x43,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                              0x04, 0x20, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf,
+    0x7e, 0xf8, 0xc3, 0xdf, 0x3e, 0xf0, 0x81, 0xdf, 0xbf, 0xf7, 0xbd, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f, 0xff, 0x3f, 0xff,
+    0x6f, 0xff, 0xdf, 0xfe, 0x6f, 0xff, 0xdf, 0xfe, 0x9f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
+    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
 
-const unsigned char Grinning[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+const unsigned char Grinning[] PROGMEM = {
-                                          0x42, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                          0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
+    0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
+    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char Slightly_Smiling[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+const unsigned char Slightly_Smiling[] PROGMEM = {
-                                                  0x42, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                                  0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
+    0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
+    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char Winking_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x20, 0x42,
+const unsigned char Winking_Face[] PROGMEM = {
-                                              0x46, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                              0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xf0, 0xff, 0xc3, 0x78, 0xef, 0xc3, 0xc7, 0xb8, 0xdf, 0xbd, 0xcf, 0xfc, 0xf9, 0x7f, 0xcf, 0xfc, 0xf0, 0xff, 0xcf,
+    0xfe, 0xf0, 0xc3, 0xdf, 0xfe, 0xf0, 0x81, 0xdf, 0xff, 0xf0, 0xbf, 0xff, 0xff, 0xf9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
+    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
 
-const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {
-                                                       0x4A, 0x02, 0x40, 0xFA, 0x5F, 0x0A, 0x50, 0x0A, 0x50, 0x12, 0x48,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                                       0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf8, 0xe3, 0xcf, 0x7c, 0xf7, 0xdd, 0xcf,
+    0xbe, 0xef, 0xbe, 0xdf, 0xbe, 0xef, 0xbe, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0xff, 0x5e, 0x55, 0x55, 0xdf, 0x5e, 0x55, 0x55, 0xdf,
+    0x3c, 0x00, 0x80, 0xcf, 0x7c, 0x55, 0xd5, 0xcf, 0xf8, 0x54, 0xe5, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char heart_smile[] PROGMEM = {0x00, 0x00, 0x6C, 0x07, 0x7C, 0x18, 0x7C, 0x20, 0x38, 0x24, 0x52,
+const unsigned char question[] PROGMEM = {
-                                             0x0A, 0x02, 0xD8, 0x02, 0xF8, 0x22, 0xFC, 0x20, 0x74, 0xDB, 0x23,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0xC0, 0xFF, 0x07, 0x00, 0xE0, 0xFF, 0x07, 0x00,
-                                             0x1F, 0x00, 0x1F, 0x20, 0x0E, 0x18, 0xE4, 0x07, 0x00, 0x00};
+    0xE0, 0xC3, 0x0F, 0x00, 0xF0, 0x81, 0x0F, 0x00, 0xF0, 0x01, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x0F, 0x00,
+    0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0x7C, 0x00, 0x00,
+    0x00, 0x3C, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
 
-const unsigned char Heart_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x54, 0x2A, 0xFA,
+const unsigned char bang[] PROGMEM = {
-                                            0x5F, 0x72, 0x4E, 0x22, 0x44, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48,
+    0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x07, 0xF8, 0x3F, 0xFF, 0x07, 0xF8, 0x3F,
-                                            0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F,
+    0xFE, 0x03, 0xF0, 0x1F, 0xFE, 0x03, 0xF0, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F,
+    0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0xFC, 0x03, 0xF0, 0x0F, 0xFE, 0x03, 0xF0, 0x1F,
+    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xF8, 0x01, 0xE0, 0x07,
+};
 
-const unsigned char question[] PROGMEM = {0xE0, 0x07, 0x10, 0x08, 0x08, 0x10, 0x88, 0x11, 0x48, 0x12, 0x48,
+const unsigned char haha[] PROGMEM = {
-                                          0x12, 0x48, 0x12, 0x30, 0x11, 0x80, 0x08, 0x40, 0x04, 0x40, 0x02,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xf9, 0xf3, 0xc0,
-                                          0xC0, 0x03, 0x00, 0x00, 0xC0, 0x03, 0x40, 0x02, 0x80, 0x01};
+    0xf0, 0xfe, 0xef, 0xc1, 0x38, 0xff, 0x9f, 0xc3, 0xd8, 0xff, 0x7f, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xcf,
+    0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xef, 0xff, 0xff, 0xde, 0xe7, 0xff, 0xff, 0xdc, 0xeb, 0xff, 0xff, 0xda,
+    0xed, 0xff, 0xff, 0xd6, 0xee, 0xff, 0xff, 0xce, 0x36, 0x00, 0x80, 0xcd, 0xb8, 0xff, 0xbf, 0xc3, 0x7e, 0x00, 0xc0, 0xdf,
+    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char bang[] PROGMEM = {0x30, 0x0C, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48,
+const unsigned char ROFL[] PROGMEM = {
-                                      0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x30, 0x0C,
+    0x00, 0x00, 0x00, 0xc0, 0x00, 0xfc, 0x07, 0xc0, 0x00, 0xff, 0x1f, 0xc0, 0x80, 0xff, 0x7f, 0xc0, 0xc0, 0xff, 0xff, 0xc0,
-                                      0x00, 0x00, 0x30, 0x0C, 0x48, 0x12, 0x30, 0x0C, 0x00, 0x00};
+    0xe0, 0x9f, 0xff, 0xc1, 0xf0, 0x9f, 0xff, 0xc0, 0xf8, 0x9f, 0x7f, 0xcb, 0xf8, 0x9f, 0xbf, 0xcb, 0xfc, 0x9f, 0xdf, 0xdb,
+    0xfc, 0x1f, 0x08, 0xdc, 0xfe, 0x1f, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xfe, 0x1e, 0xf0, 0x7f, 0xfe, 0x1e, 0xf0, 0xbf, 0xfe,
+    0xfe, 0xf3, 0xdf, 0xfe, 0xfe, 0xf3, 0x6f, 0xfe, 0xfe, 0xf3, 0x37, 0xfe, 0xfe, 0xeb, 0x1b, 0xfe, 0xfc, 0xef, 0x0d, 0xde,
+    0xfc, 0xe7, 0x06, 0xcf, 0xf8, 0x6b, 0x83, 0xcf, 0xf8, 0x0d, 0xc0, 0xc7, 0xf0, 0xed, 0xff, 0xc7, 0xe0, 0xee, 0xff, 0xc3,
+    0xc0, 0xee, 0xff, 0xc1, 0x80, 0xee, 0xff, 0xc0, 0x00, 0xe6, 0x3f, 0xc0, 0x00, 0xf0, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0xc0};
 
-const unsigned char haha[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char Smiling_Closed_Eyes[] PROGMEM = {
-                                      0x4A, 0x0A, 0x50, 0x0E, 0x70, 0xF2, 0x4F, 0x12, 0x48, 0x32, 0x44,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-                                      0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0x7c, 0xfe, 0xcf, 0xcf, 0xfc, 0xfc, 0xe7, 0xcf,
+    0xfe, 0xf9, 0xf3, 0xdf, 0xfe, 0xf3, 0xf9, 0xdf, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xfc, 0xe7, 0xff, 0x7f, 0xfe, 0xcf, 0xff,
+    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
+    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
+    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char ROFL[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x84, 0x21, 0x84, 0x20, 0x02,
+const unsigned char Grinning_SmilingEyes2[] PROGMEM = {
-                                      0x4C, 0x02, 0x4A, 0x1A, 0x49, 0x8A, 0x48, 0x42, 0x48, 0x22, 0x44,
+    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xff, 0xff, 0xc0,
-                                      0xE4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0xf0, 0xff, 0xff, 0xc1, 0xf8, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xc7,
+    0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf,
+    0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0x3f, 0x00, 0x80, 0xdf, 0xbe, 0xff, 0xbf, 0xcf, 0x7e, 0x00, 0xc0, 0xcf,
+    0x7c, 0x00, 0xc0, 0xc7, 0xfc, 0x00, 0xe0, 0xc7, 0xf8, 0x01, 0xf0, 0xc3, 0xf8, 0x03, 0xf8, 0xc3, 0xf0, 0xff, 0xff, 0xc1,
+    0xe0, 0xff, 0xff, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
 
-const unsigned char Smiling_Closed_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x42,
+const unsigned char wave_icon[] PROGMEM = {
-                                                     0x42, 0x22, 0x44, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+    0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x7f, 0xc0, 0x00, 0x00, 0xc0, 0xc1, 0x00, 0x00, 0x00, 0xc7,
-                                                     0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0x00, 0x00, 0x1e, 0xcc, 0x00, 0x00, 0x30, 0xc8, 0x00, 0x00, 0x60, 0xd8, 0x00, 0x08, 0xc0, 0xd0, 0x00, 0x1a, 0x81, 0xd1,
+    0x00, 0x36, 0x03, 0xd3, 0x80, 0x6d, 0x06, 0xd2, 0x00, 0xdb, 0x0c, 0xc2, 0x80, 0xb6, 0x1d, 0xc0, 0x80, 0x6d, 0x1f, 0xc0,
+    0x00, 0xdb, 0x3f, 0xc0, 0x00, 0xf6, 0x7f, 0xc0, 0x00, 0xfc, 0x7f, 0xc0, 0x08, 0xf8, 0x7f, 0xc0, 0x48, 0xf0, 0x7f, 0xc0,
+    0x48, 0xe0, 0x7f, 0xc0, 0xc8, 0xc0, 0x3f, 0xc0, 0x98, 0x81, 0x1f, 0xc0, 0x10, 0x03, 0x00, 0xc0, 0x30, 0x0e, 0x00, 0xc0,
+    0x20, 0x38, 0x00, 0xc0, 0xe0, 0x00, 0x00, 0xc0, 0x80, 0x07, 0x00, 0xc0, 0x00, 0x1e, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
 
-const unsigned char Grinning_SmilingEyes2[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+const unsigned char cowboy[] PROGMEM = {
-                                                       0x4A, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+    0x00, 0x0c, 0x0c, 0xc0, 0x00, 0x02, 0x10, 0xc0, 0x00, 0x01, 0x20, 0xc0, 0xbc, 0x00, 0x40, 0xcf, 0xc2, 0x01, 0xe0, 0xd0,
-                                                       0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0x01, 0x01, 0x20, 0xe0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0,
+    0xc1, 0x3f, 0xff, 0xe0, 0xe1, 0xff, 0xff, 0xe1, 0xf2, 0xf3, 0xf3, 0xd3, 0xf4, 0xf1, 0xe3, 0xcb, 0xfc, 0xf1, 0xe3, 0xc7,
+    0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xfb, 0xf7, 0xc7, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xc7,
+    0x70, 0xf8, 0x8f, 0xc3, 0x70, 0x03, 0xb0, 0xc3, 0x70, 0xfe, 0xbf, 0xc3, 0x60, 0x00, 0x80, 0xc1, 0xc0, 0x00, 0xc0, 0xc0,
+    0x80, 0x01, 0x60, 0xc0, 0x00, 0x07, 0x38, 0xc0, 0x00, 0xfe, 0x1f, 0xc0, 0x00, 0xf0, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0};
 
-const unsigned char Loudly_Crying_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x2C, 0x4A,
+const unsigned char deadmau5[] PROGMEM = {
-                                                    0x52, 0x12, 0x48, 0x12, 0x48, 0x92, 0x49, 0x52, 0x4A, 0x52, 0x4A,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x07, 0x00,
-                                                    0x54, 0x2A, 0x94, 0x29, 0x18, 0x18, 0xF0, 0x0F, 0x00, 0x00};
+    0x00, 0xFC, 0x03, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0x00,
+    0xE0, 0xFF, 0xFF, 0x01, 0xF0, 0xFF, 0x7F, 0x00, 0xF0, 0xFF, 0xFF, 0x03, 0xF8, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x07,
+    0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFE, 0xFF, 0xFF, 0x00,
+    0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0xFC,
+    0x0F, 0xFF, 0x7F, 0x00, 0xC0, 0xFF, 0x1F, 0xF8, 0x0F, 0xFC, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0xF8, 0x1F, 0xFC, 0x1F, 0x00,
+    0x00, 0xFF, 0x0F, 0xFC, 0x3F, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x1F, 0xFF, 0xFF, 0xFE, 0x01, 0x00, 0x00, 0x00, 0xFC, 0xFF,
+    0xFF, 0x07, 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00,
+    0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x80, 0x07, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
 
-const unsigned char wave_icon[] PROGMEM = {0x00, 0x00, 0xC0, 0x18, 0x30, 0x21, 0x48, 0x5A, 0x94, 0x64, 0x24,
+const unsigned char sun[] PROGMEM = {
-                                           0x25, 0x4A, 0x24, 0x12, 0x44, 0x22, 0x44, 0x04, 0x40, 0x08, 0x40,
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x30, 0xC0, 0x00, 0x03,
-                                           0x12, 0x40, 0x22, 0x20, 0xC4, 0x10, 0x18, 0x0F, 0x00, 0x00};
+    0x70, 0x00, 0x80, 0x03, 0xF0, 0x00, 0xC0, 0x03, 0xF0, 0xF8, 0xC7, 0x03, 0xE0, 0xFC, 0xCF, 0x01, 0x00, 0xFE, 0x1F, 0x00,
+    0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x8E, 0xFF, 0x7F, 0x1C, 0x9F, 0xFF, 0x7F, 0x3E,
+    0x9F, 0xFF, 0x7F, 0x3E, 0x8E, 0xFF, 0x7F, 0x1C, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00,
+    0x00, 0xFE, 0x1F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0xC0, 0xF9, 0xE7, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0xF0, 0x01, 0xE0, 0x03,
+    0xF0, 0xC0, 0xC0, 0x03, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00,
+};
 
-const unsigned char cowboy[] PROGMEM = {0x70, 0x0E, 0x8F, 0xF1, 0x11, 0x88, 0x21, 0x84, 0xC2, 0x43, 0x1E,
+const unsigned char rain[] PROGMEM = {
-                                        0x78, 0xE2, 0x47, 0x42, 0x42, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+    0xC0, 0x0F, 0xC0, 0x00, 0x40, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x03, 0x38, 0x00,
-                                        0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0x00, 0x0E, 0x0C, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00, 0x20,
+    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x03, 0x00, 0x00, 0x30, 0x02, 0x00,
+    0x00, 0x10, 0x06, 0x00, 0x00, 0x08, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x01, 0x80, 0x00, 0x01, 0x00,
+    0xC0, 0xC0, 0x81, 0x03, 0xA0, 0x60, 0xC1, 0x03, 0x90, 0x20, 0x41, 0x01, 0xF0, 0xE0, 0xC0, 0x01, 0x60, 0x4C,
+    0x98, 0x00, 0x00, 0x0E, 0x1C, 0x00, 0x00, 0x0B, 0x12, 0x00, 0x00, 0x09, 0x1A, 0x00, 0x00, 0x06, 0x0E, 0x00,
+};
 
-const unsigned char deadmau5[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0xE4, 0x27, 0x12, 0x48, 0x0A,
+const unsigned char cloud[] PROGMEM = {
-                                          0x50, 0x0E, 0x70, 0x11, 0x88, 0x19, 0x98, 0x19, 0x98, 0x19, 0x98,
+    0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x70, 0x30, 0x00, 0x00, 0x10, 0x60, 0x00, 0x80, 0x1F, 0x40, 0x00,
-                                          0x19, 0x98, 0x19, 0x98, 0x11, 0x88, 0x0E, 0x70, 0x00, 0x00};
+    0xC0, 0x0F, 0xC0, 0x00, 0xC0, 0x00, 0x80, 0x00, 0x60, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x01,
+    0x20, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x08, 0x06, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10,
+    0x02, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20,
+    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x10,
+    0x02, 0x00, 0x00, 0x10, 0x06, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x0C, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03,
+};
 
-const unsigned char sun[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0xEC, 0x37, 0xFC, 0x3F, 0xF8, 0x1F, 0xFC,
+const unsigned char fog[] PROGMEM = {
-                                     0x3F, 0xFE, 0x7F, 0xFC, 0x3F, 0xFC, 0x3F, 0xFE, 0x7F, 0xFC, 0x3F,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-                                     0xF8, 0x1F, 0xFC, 0x3F, 0xEC, 0x37, 0x80, 0x01, 0x00, 0x00};
+    0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x3C, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01,
+    0x00, 0x38, 0x00, 0x00, 0xFC, 0x00, 0x7E, 0x00, 0xFF, 0x83, 0xFF, 0x01, 0x03, 0xFF, 0x81, 0x01, 0x00, 0x7C, 0x00, 0x00,
+    0xF8, 0x00, 0x3E, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01, 0x00, 0x38, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
 
-const unsigned char rain[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
+const unsigned char devil[] PROGMEM = {
-                                      0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x00, 0x48, 0x12,
+    0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0xe0, 0x03, 0x00, 0x00, 0xf0, 0x0f, 0xfc, 0x0f, 0xfc,
-                                      0x48, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x00, 0x00, 0x00};
+    0x3f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfc, 0xff, 0xff, 0xcf,
+    0xfc, 0xff, 0xff, 0xcf, 0xf8, 0xff, 0xff, 0xc7, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xf1, 0xe3, 0xc3,
+    0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3,
+    0xf0, 0xff, 0xff, 0xc3, 0xe0, 0xfd, 0xef, 0xc1, 0xe0, 0xf3, 0xf3, 0xc1, 0xc0, 0x07, 0xf8, 0xc0, 0x80, 0x1f, 0x7e, 0xc0,
+    0x00, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
 
-const unsigned char cloud[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC,
+const unsigned char heart[] PROGMEM = {
-                                       0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F,
+    0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0xF0, 0x00, 0xF8, 0x0F, 0xFC, 0x07, 0xFC, 0x1F, 0x06, 0x0E, 0xFE, 0x3F, 0x03, 0x18,
-                                       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    0xFE, 0xFF, 0x7F, 0x10, 0xFF, 0xFF, 0xFF, 0x31, 0xFF, 0xFF, 0xFF, 0x33, 0xFF, 0xFF, 0xFF, 0x37, 0xFF, 0xFF, 0xFF, 0x37,
+    0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFE, 0xFF, 0xFF, 0x1F, 0xFE, 0xFF, 0xFF, 0x1F,
+    0xFC, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x0F, 0xF8, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03, 0xF0, 0xFF, 0xFF, 0x03,
+    0xE0, 0xFF, 0xFF, 0x01, 0xC0, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0xFE, 0x1F, 0x00,
+    0x00, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x80, 0x00, 0x00,
+};
 
-const unsigned char fog[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x54, 0x55, 0x22, 0x22, 0x00,
+const unsigned char poo[] PROGMEM = {
-                                     0x00, 0x44, 0x44, 0xAA, 0x2A, 0x11, 0x11, 0x00, 0x00, 0x88, 0x88,
+    0x00, 0x1c, 0x00, 0xc0, 0x00, 0x7c, 0x00, 0xc0, 0x00, 0xfc, 0x00, 0xc0, 0x00, 0x7c, 0x03, 0xc0, 0x00, 0xbe, 0x03, 0xc0,
-                                     0x54, 0x55, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    0x00, 0xdf, 0x0f, 0xc0, 0x80, 0xcf, 0x0f, 0xc0, 0xc0, 0xf1, 0x0f, 0xc0, 0x60, 0xfc, 0x0f, 0xc0, 0x30, 0xff, 0x07, 0xc0,
+    0x90, 0xff, 0x3b, 0xc0, 0xc0, 0xff, 0x7d, 0xc0, 0xf8, 0xff, 0xfc, 0xc0, 0xf8, 0x3f, 0xf0, 0xc0, 0x78, 0x88, 0xc0, 0xc0,
+    0x20, 0xe3, 0x18, 0xc0, 0x98, 0xe7, 0xbc, 0xc1, 0x9c, 0x64, 0xa4, 0xc3, 0x9e, 0x64, 0xa4, 0xc7, 0xbe, 0xe4, 0xa4, 0xc7,
+    0xbc, 0x27, 0xbc, 0xc7, 0x38, 0x03, 0xd9, 0xc3, 0x00, 0xf0, 0x63, 0xc0, 0xf8, 0xfc, 0x3f, 0xcf, 0xfc, 0xff, 0x87, 0xdf,
+    0xfe, 0xff, 0xe0, 0xdf, 0xfc, 0x1f, 0xfe, 0xdf, 0xf8, 0x07, 0xf8, 0xcf, 0xf0, 0x03, 0xe0, 0xc7, 0x00, 0x00, 0x00, 0xc0};
 
-const unsigned char devil[] PROGMEM = {0x06, 0x60, 0xCA, 0x53, 0x32, 0x4C, 0x22, 0x44, 0x44, 0x22, 0x3A,
+const unsigned char bell_icon[] PROGMEM = {
-                                       0x5C, 0x32, 0x4C, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x22, 0x44,
+    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b11110000,
-                                       0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+    0b00000011, 0b00000000, 0b00000000, 0b11111100, 0b00001111, 0b00000000, 0b00000000, 0b00001111, 0b00111100, 0b00000000,
-
+    0b00000000, 0b00000011, 0b00110000, 0b00000000, 0b10000000, 0b00000001, 0b01100000, 0b00000000, 0b11000000, 0b00000000,
-const unsigned char heart[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x3C, 0x3C, 0x7E, 0x7E, 0xFE, 0x7F, 0xFE,
+    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-                                       0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F, 0xF8, 0x1F,
+    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-                                       0xF0, 0x0F, 0xE0, 0x07, 0xC0, 0x03, 0x80, 0x01, 0x00, 0x00};
+    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-
+    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b01000000, 0b00000000, 0b10000000, 0b00000000, 0b01100000, 0b00000000,
-const unsigned char poo[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x20, 0x04, 0x10, 0x04, 0xF0,
+    0b10000000, 0b00000001, 0b01110000, 0b00000000, 0b10000000, 0b00000011, 0b00110000, 0b00000000, 0b00000000, 0b00000011,
-                                     0x08, 0x10, 0x10, 0x48, 0x12, 0x08, 0x18, 0xE8, 0x21, 0x1C, 0x40,
+    0b00011000, 0b00000000, 0b00000000, 0b00000110, 0b11110000, 0b11111111, 0b11111111, 0b00000011, 0b00000000, 0b00001100,
-                                     0x42, 0x42, 0x82, 0x41, 0x02, 0x30, 0xFC, 0x0F, 0x00, 0x00};
+    0b00001100, 0b00000000, 0b00000000, 0b00011000, 0b00000110, 0b00000000, 0b00000000, 0b11111000, 0b00000111, 0b00000000,
-
+    0b00000000, 0b11100000, 0b00000001, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-const unsigned char bell_icon[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0xE0, 0x07, 0xF0, 0x0F, 0xF0,
+    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000};
-                                           0x0F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xFC, 0x3F,
-                                           0xFC, 0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0x80, 0x01, 0x00, 0x00};
-
-const unsigned char cookie[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x22, 0x32,
-                                        0x40, 0x02, 0x58, 0x82, 0x5B, 0x92, 0x43, 0x82, 0x43, 0x02, 0x40,
-                                        0x64, 0x28, 0x64, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
-
-const unsigned char Fire[] PROGMEM = {0x30, 0x00, 0xF0, 0x00, 0xF8, 0x03, 0xF8, 0x07, 0xFC, 0x1F, 0xFC,
-                                      0x1F, 0xFE, 0x3E, 0x7E, 0x3E, 0x3E, 0x7C, 0x1E, 0x78, 0x1E, 0x70,
-                                      0x1C, 0x70, 0x1C, 0x70, 0x38, 0x38, 0x30, 0x38, 0x60, 0x0C};
-
-const unsigned char peace_sign[] PROGMEM = {0xC0, 0x30, 0x40, 0x29, 0x40, 0x25, 0x40, 0x15, 0x40, 0x12, 0x38,
-                                            0x0A, 0x54, 0x68, 0x54, 0x58, 0x54, 0x44, 0x3C, 0x22, 0x04, 0x22,
-                                            0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
-
-const unsigned char Praying[] PROGMEM = {0x00, 0x00, 0x40, 0x02, 0xA0, 0x05, 0x90, 0x09, 0x90, 0x09, 0x90,
-                                         0x09, 0x98, 0x19, 0x94, 0x29, 0xA4, 0x25, 0xA4, 0x25, 0x84, 0x21,
-                                         0x84, 0x21, 0x86, 0x61, 0x4E, 0x72, 0x7F, 0x7E, 0x3F, 0xFC};
-
-const unsigned char Sparkles[] PROGMEM = {0x00, 0x00, 0x10, 0x00, 0x38, 0x04, 0x10, 0x04, 0x00, 0x0E, 0x00,
-                                          0x1F, 0x80, 0x3F, 0xE0, 0xFF, 0x80, 0x3F, 0x10, 0x1F, 0x10, 0x0E,
-                                          0x38, 0x04, 0xFE, 0x04, 0x38, 0x00, 0x10, 0x00, 0x10, 0x00};
-
-const unsigned char clown[] PROGMEM = {0x00, 0x00, 0xEE, 0x77, 0x1A, 0x58, 0x06, 0x60, 0x24, 0x24, 0x72,
-                                       0x4E, 0x22, 0x44, 0x82, 0x41, 0x82, 0x41, 0x1A, 0x58, 0xF2, 0x4F,
-                                       0x14, 0x28, 0xE4, 0x27, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
-
-const unsigned char robo[] PROGMEM = {0x80, 0x01, 0xC0, 0x03, 0x80, 0x01, 0xFC, 0x3F, 0x04, 0x20, 0x74,
-                                      0x2E, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x02, 0x40, 0xA2, 0x4A,
-                                      0x52, 0x45, 0x04, 0x20, 0x04, 0x20, 0xFC, 0x3F, 0x00, 0x00};
-
-const unsigned char hole[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-                                      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x3C, 0x3C,
-                                      0x06, 0x60, 0x0C, 0x30, 0xF0, 0x0F, 0x00, 0x00, 0x00, 0x00};
-
-const unsigned char bowling[] PROGMEM = {0x00, 0x38, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00,
-                                         0x38, 0x00, 0x28, 0x78, 0x44, 0x84, 0x82, 0x22, 0x83, 0x52, 0x83,
-                                         0x02, 0x83, 0x02, 0x45, 0x84, 0x44, 0x78, 0x38, 0x00, 0x00};
-
-const unsigned char vulcan_salute[] PROGMEM = {0x08, 0x02, 0x16, 0x0D, 0x15, 0x15, 0x15, 0x15, 0xA9, 0x12, 0x4A,
-                                               0x0A, 0x02, 0x38, 0x04, 0x48, 0x04, 0x44, 0x04, 0x22, 0x04, 0x22,
-                                               0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
 #endif
 
 } // namespace graphics
-#endif

src/graphics/emotes.h

@@ -17,150 +17,98 @@ extern const int numEmotes;
 
 #ifndef EXCLUDE_EMOJI
 // === Emote Bitmaps ===
-#define thumbs_height 16
+#define thumbs_height 25
-#define thumbs_width 16
+#define thumbs_width 25
 extern const unsigned char thumbup[] PROGMEM;
 extern const unsigned char thumbdown[] PROGMEM;
 
-#define Smiling_Eyes_height 16
+#define Smiling_Eyes_height 30
-#define Smiling_Eyes_width 16
+#define Smiling_Eyes_width 30
 extern const unsigned char Smiling_Eyes[] PROGMEM;
 
-#define Grinning_height 16
+#define Grinning_height 30
-#define Grinning_width 16
+#define Grinning_width 30
 extern const unsigned char Grinning[] PROGMEM;
 
-#define Slightly_Smiling_height 16
+#define Slightly_Smiling_height 30
-#define Slightly_Smiling_width 16
+#define Slightly_Smiling_width 30
 extern const unsigned char Slightly_Smiling[] PROGMEM;
 
-#define Winking_Face_height 16
+#define Winking_Face_height 30
-#define Winking_Face_width 16
+#define Winking_Face_width 30
 extern const unsigned char Winking_Face[] PROGMEM;
 
-#define Grinning_Smiling_Eyes_height 16
+#define Grinning_Smiling_Eyes_height 30
-#define Grinning_Smiling_Eyes_width 16
+#define Grinning_Smiling_Eyes_width 30
 extern const unsigned char Grinning_Smiling_Eyes[] PROGMEM;
 
-#define heart_smile_height 16
+#define question_height 25
-#define heart_smile_width 16
+#define question_width 25
-extern const unsigned char heart_smile[] PROGMEM;
-
-#define Heart_eyes_height 16
-#define Heart_eyes_width 16
-extern const unsigned char Heart_eyes[] PROGMEM;
-
-#define question_height 16
-#define question_width 16
 extern const unsigned char question[] PROGMEM;
 
-#define bang_height 16
+#define bang_height 30
-#define bang_width 16
+#define bang_width 30
 extern const unsigned char bang[] PROGMEM;
 
-#define haha_height 16
+#define haha_height 30
-#define haha_width 16
+#define haha_width 30
 extern const unsigned char haha[] PROGMEM;
 
-#define ROFL_height 16
+#define ROFL_height 30
-#define ROFL_width 16
+#define ROFL_width 30
 extern const unsigned char ROFL[] PROGMEM;
 
-#define Smiling_Closed_Eyes_height 16
+#define Smiling_Closed_Eyes_height 30
-#define Smiling_Closed_Eyes_width 16
+#define Smiling_Closed_Eyes_width 30
 extern const unsigned char Smiling_Closed_Eyes[] PROGMEM;
 
-#define Grinning_SmilingEyes2_height 16
+#define Grinning_SmilingEyes2_height 30
-#define Grinning_SmilingEyes2_width 16
+#define Grinning_SmilingEyes2_width 30
 extern const unsigned char Grinning_SmilingEyes2[] PROGMEM;
 
-#define Loudly_Crying_Face_height 16
+#define wave_icon_height 30
-#define Loudly_Crying_Face_width 16
+#define wave_icon_width 30
-extern const unsigned char Loudly_Crying_Face[] PROGMEM;
-
-#define wave_icon_height 16
-#define wave_icon_width 16
 extern const unsigned char wave_icon[] PROGMEM;
 
-#define cowboy_height 16
+#define cowboy_height 30
-#define cowboy_width 16
+#define cowboy_width 30
 extern const unsigned char cowboy[] PROGMEM;
 
-#define deadmau5_height 16
+#define deadmau5_height 30
-#define deadmau5_width 16
+#define deadmau5_width 60
 extern const unsigned char deadmau5[] PROGMEM;
 
-#define sun_height 16
+#define sun_height 30
-#define sun_width 16
+#define sun_width 30
 extern const unsigned char sun[] PROGMEM;
 
-#define rain_height 16
+#define rain_height 30
-#define rain_width 16
+#define rain_width 30
 extern const unsigned char rain[] PROGMEM;
 
-#define cloud_height 16
+#define cloud_height 30
-#define cloud_width 16
+#define cloud_width 30
 extern const unsigned char cloud[] PROGMEM;
 
-#define fog_height 16
+#define fog_height 25
-#define fog_width 16
+#define fog_width 25
 extern const unsigned char fog[] PROGMEM;
 
-#define devil_height 16
+#define devil_height 30
-#define devil_width 16
+#define devil_width 30
 extern const unsigned char devil[] PROGMEM;
 
-#define heart_height 16
+#define heart_height 30
-#define heart_width 16
+#define heart_width 30
 extern const unsigned char heart[] PROGMEM;
 
-#define poo_height 16
+#define poo_height 30
-#define poo_width 16
+#define poo_width 30
 extern const unsigned char poo[] PROGMEM;
 
-#define bell_icon_width 16
+#define bell_icon_width 30
-#define bell_icon_height 16
+#define bell_icon_height 30
 extern const unsigned char bell_icon[] PROGMEM;
-
-#define cookie_width 16
-#define cookie_height 16
-extern const unsigned char cookie[] PROGMEM;
-
-#define Fire_width 16
-#define Fire_height 16
-extern const unsigned char Fire[] PROGMEM;
-
-#define peace_sign_width 16
-#define peace_sign_height 16
-extern const unsigned char peace_sign[] PROGMEM;
-
-#define Praying_width 16
-#define Praying_height 16
-extern const unsigned char Praying[] PROGMEM;
-
-#define Sparkles_width 16
-#define Sparkles_height 16
-extern const unsigned char Sparkles[] PROGMEM;
-
-#define clown_width 16
-#define clown_height 16
-extern const unsigned char clown[] PROGMEM;
-
-#define robo_width 16
-#define robo_height 16
-extern const unsigned char robo[] PROGMEM;
-
-#define hole_width 16
-#define hole_height 16
-extern const unsigned char hole[] PROGMEM;
-
-#define bowling_width 16
-#define bowling_height 16
-extern const unsigned char bowling[] PROGMEM;
-
-#define vulcan_salute_width 16
-#define vulcan_salute_height 16
-extern const unsigned char vulcan_salute[] PROGMEM;
 #endif // EXCLUDE_EMOJI
 
-} // namespace graphics
+} // namespace graphics

src/graphics/images.h

@@ -28,7 +28,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(USE_ST7796) || defined(HACKADAY_COMMUNICATOR) || ARCH_PORTDUINO) &&                                                 \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
@@ -360,10 +360,6 @@ const uint8_t chirpy_hirez[] = {
 #define chirpy_small_image_height 8
 const uint8_t chirpy_small[] = {0x7f, 0x41, 0x55, 0x55, 0x55, 0x55, 0x41, 0x7f};
 
-#define connection_icon_width 7
-#define connection_icon_height 5
-const uint8_t connection_icon[] = {0x36, 0x41, 0x5D, 0x41, 0x36};
-
 #ifdef M5STACK_UNITC6L
 #include "img/icon_small.xbm"
 #else

src/graphics/niche/InkHUD/AppletFont.cpp

@@ -124,7 +124,7 @@ uint32_t InkHUD::AppletFont::toUtf32(std::string utf8)
         utf32 |= (utf8.at(3) & 0b00111111);
         break;
     default:
-        return 0;
+        assert(false);
     }
 
     return utf32;

src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp

@@ -13,147 +13,45 @@ void InkHUD::MapApplet::onRender()
         return;
     }
 
-    // Helper: draw rounded rectangle centered at x,y
-    auto fillRoundedRect = [&](int16_t cx, int16_t cy, int16_t w, int16_t h, int16_t r, uint16_t color) {
-        int16_t x = cx - (w / 2);
-        int16_t y = cy - (h / 2);
-
-        // center rects
-        fillRect(x + r, y, w - 2 * r, h, color);
-        fillRect(x, y + r, r, h - 2 * r, color);
-        fillRect(x + w - r, y + r, r, h - 2 * r, color);
-
-        // corners
-        fillCircle(x + r, y + r, r, color);
-        fillCircle(x + w - r - 1, y + r, r, color);
-        fillCircle(x + r, y + h - r - 1, r, color);
-        fillCircle(x + w - r - 1, y + h - r - 1, r, color);
-    };
-
     // Find center of map
+    // - latitude and longitude
+    // - will be placed at X(0.5), Y(0.5)
     getMapCenter(&latCenter, &lngCenter);
+
+    // Calculate North+East distance of each node to map center
+    // - which nodes to use controlled by virtual shouldDrawNode method
     calculateAllMarkers();
+
+    // Set the region shown on the map
+    // - default: fit all nodes, plus padding
+    // - maybe overriden by derived applet
+    // - getMapSize *sets* passed parameters (C-style)
     getMapSize(&widthMeters, &heightMeters);
+
+    // Set the metersToPx conversion value
     calculateMapScale();
 
-    // Draw all markers first
+    // Special marker for own node
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    if (ourNode && nodeDB->hasValidPosition(ourNode))
+        drawLabeledMarker(ourNode);
+
+    // Draw all markers
     for (Marker m : markers) {
         int16_t x = X(0.5) + (m.eastMeters * metersToPx);
         int16_t y = Y(0.5) - (m.northMeters * metersToPx);
 
-        // Add white halo outline first
+        // Cross Size
-        constexpr int outlinePad = 1;
+        constexpr uint16_t csMin = 5;
-        int boxSize = 11;
+        constexpr uint16_t csMax = 12;
-        int radius = 2; // rounded corner radius
 
-        // White halo background
+        // Too many hops away
-        fillRoundedRect(x, y, boxSize + (outlinePad * 2), boxSize + (outlinePad * 2), radius + 1, WHITE);
+        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) // Too many mops
-
+            printAt(x, y, "!", CENTER, MIDDLE);
-        // Draw inner box
+        else if (!m.hasHopsAway) // Unknown hops
-        fillRoundedRect(x, y, boxSize, boxSize, radius, BLACK);
+            drawCross(x, y, csMin);
-
+        else // The fewer hops, the larger the cross
-        // Text inside
+            drawCross(x, y, map(m.hopsAway, 0, config.lora.hop_limit, csMax, csMin));
-        setFont(fontSmall);
-        setTextColor(WHITE);
-
-        // Draw actual marker on top
-        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) {
-            printAt(x + 1, y + 1, "X", CENTER, MIDDLE);
-        } else if (!m.hasHopsAway) {
-            printAt(x + 1, y + 1, "?", CENTER, MIDDLE);
-        } else {
-            char hopStr[4];
-            snprintf(hopStr, sizeof(hopStr), "%d", m.hopsAway);
-            printAt(x, y + 1, hopStr, CENTER, MIDDLE);
-        }
-
-        // Restore default font and color
-        setFont(fontSmall);
-        setTextColor(BLACK);
-    }
-
-    // Dual map scale bars
-    int16_t horizPx = width() * 0.25f;
-    int16_t vertPx = height() * 0.25f;
-    float horizMeters = horizPx / metersToPx;
-    float vertMeters = vertPx / metersToPx;
-
-    auto formatDistance = [&](float meters, char *out, size_t len) {
-        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
-            float feet = meters * 3.28084f;
-            if (feet < 528)
-                snprintf(out, len, "%.0f ft", feet);
-            else {
-                float miles = feet / 5280.0f;
-                snprintf(out, len, miles < 10 ? "%.1f mi" : "%.0f mi", miles);
-            }
-        } else {
-            if (meters >= 1000)
-                snprintf(out, len, "%.1f km", meters / 1000.0f);
-            else
-                snprintf(out, len, "%.0f m", meters);
-        }
-    };
-
-    // Horizontal scale bar
-    int16_t horizBarY = height() - 2;
-    int16_t horizBarX = 1;
-    drawLine(horizBarX, horizBarY, horizBarX + horizPx, horizBarY, BLACK);
-    drawLine(horizBarX, horizBarY - 3, horizBarX, horizBarY + 3, BLACK);
-    drawLine(horizBarX + horizPx, horizBarY - 3, horizBarX + horizPx, horizBarY + 3, BLACK);
-
-    char horizLabel[32];
-    formatDistance(horizMeters, horizLabel, sizeof(horizLabel));
-    int16_t horizLabelW = getTextWidth(horizLabel);
-    int16_t horizLabelH = getFont().lineHeight();
-    int16_t horizLabelX = horizBarX + horizPx + 4;
-    int16_t horizLabelY = horizBarY - horizLabelH + 1;
-    fillRect(horizLabelX - 2, horizLabelY - 1, horizLabelW + 4, horizLabelH + 2, WHITE);
-    printAt(horizLabelX, horizBarY, horizLabel, LEFT, BOTTOM);
-
-    // Vertical scale bar
-    int16_t vertBarX = 1;
-    int16_t vertBarBottom = horizBarY;
-    int16_t vertBarTop = vertBarBottom - vertPx;
-    drawLine(vertBarX, vertBarBottom, vertBarX, vertBarTop, BLACK);
-    drawLine(vertBarX - 3, vertBarBottom, vertBarX + 3, vertBarBottom, BLACK);
-    drawLine(vertBarX - 3, vertBarTop, vertBarX + 3, vertBarTop, BLACK);
-
-    char vertTopLabel[32];
-    formatDistance(vertMeters, vertTopLabel, sizeof(vertTopLabel));
-    int16_t topLabelY = vertBarTop - getFont().lineHeight() - 2;
-    int16_t topLabelW = getTextWidth(vertTopLabel);
-    int16_t topLabelH = getFont().lineHeight();
-    fillRect(vertBarX - 2, topLabelY - 1, topLabelW + 6, topLabelH + 2, WHITE);
-    printAt(vertBarX + (topLabelW / 2) + 1, topLabelY + (topLabelH / 2), vertTopLabel, CENTER, MIDDLE);
-
-    char vertBottomLabel[32];
-    formatDistance(vertMeters, vertBottomLabel, sizeof(vertBottomLabel));
-    int16_t bottomLabelY = vertBarBottom + 4;
-    int16_t bottomLabelW = getTextWidth(vertBottomLabel);
-    int16_t bottomLabelH = getFont().lineHeight();
-    fillRect(vertBarX - 2, bottomLabelY - 1, bottomLabelW + 6, bottomLabelH + 2, WHITE);
-    printAt(vertBarX + (bottomLabelW / 2) + 1, bottomLabelY + (bottomLabelH / 2), vertBottomLabel, CENTER, MIDDLE);
-
-    // Draw our node LAST with full white fill + outline
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
-        Marker self = calculateMarker(ourNode->position.latitude_i * 1e-7, ourNode->position.longitude_i * 1e-7, false, 0);
-
-        int16_t centerX = X(0.5) + (self.eastMeters * metersToPx);
-        int16_t centerY = Y(0.5) - (self.northMeters * metersToPx);
-
-        // White fill background + halo
-        fillCircle(centerX, centerY, 8, WHITE); // big white base
-        drawCircle(centerX, centerY, 8, WHITE); // crisp edge
-
-        // Black bullseye on top
-        drawCircle(centerX, centerY, 6, BLACK);
-        fillCircle(centerX, centerY, 2, BLACK);
-
-        // Crosshairs
-        drawLine(centerX - 8, centerY, centerX + 8, centerY, BLACK);
-        drawLine(centerX, centerY - 8, centerX, centerY + 8, BLACK);
     }
 }
 
@@ -165,129 +63,116 @@ void InkHUD::MapApplet::onRender()
 
 void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
 {
-    // If we have a valid position for our own node, use that as the anchor
+    // Find mean lat long coords
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    // ============================
-    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
+    // - assigning X, Y and Z values to position on Earth's surface in 3D space, relative to center of planet
-        *lat = ourNode->position.latitude_i * 1e-7;
+    // - averages the x, y and z coords
-        *lng = ourNode->position.longitude_i * 1e-7;
+    // - uses tan to find angles for lat / long degrees
-    } else {
+    //   - longitude: triangle formed by x and y (on plane of the equator)
-        // Find mean lat long coords
+    //   - latitude: triangle formed by z (north south),
-        // ============================
+    //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's surface
-        // - assigning X, Y and Z values to position on Earth's surface in 3D space, relative to center of planet
-        // - averages the x, y and z coords
-        // - uses tan to find angles for lat / long degrees
-        //   - longitude: triangle formed by x and y (on plane of the equator)
-        //   - latitude: triangle formed by z (north south),
-        //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's
-        //     surface
 
-        // Working totals, averaged after nodeDB processed
+    // Working totals, averaged after nodeDB processed
-        uint32_t positionCount = 0;
+    uint32_t positionCount = 0;
-        float xAvg = 0;
+    float xAvg = 0;
-        float yAvg = 0;
+    float yAvg = 0;
-        float zAvg = 0;
+    float zAvg = 0;
 
-        // For each node in db
+    // For each node in db
-        for (uint32_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    for (uint32_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
-            meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
+        meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
-            // Skip if no position
+        // Skip if no position
-            if (!nodeDB->hasValidPosition(node))
+        if (!nodeDB->hasValidPosition(node))
-                continue;
+            continue;
 
-            // Skip if derived applet doesn't want to show this node on the map
+        // Skip if derived applet doesn't want to show this node on the map
-            if (!shouldDrawNode(node))
+        if (!shouldDrawNode(node))
-                continue;
+            continue;
 
-            // Latitude and Longitude of node, in radians
+        // Latitude and Longitude of node, in radians
-            float latRad = node->position.latitude_i * (1e-7) * DEG_TO_RAD;
+        float latRad = node->position.latitude_i * (1e-7) * DEG_TO_RAD;
-            float lngRad = node->position.longitude_i * (1e-7) * DEG_TO_RAD;
+        float lngRad = node->position.longitude_i * (1e-7) * DEG_TO_RAD;
 
-            // Convert to cartesian points, with center of earth at 0, 0, 0
+        // Convert to cartesian points, with center of earth at 0, 0, 0
-            // Exact distance from center is irrelevant, as we're only interested in the vector
+        // Exact distance from center is irrelevant, as we're only interested in the vector
-            float x = cos(latRad) * cos(lngRad);
+        float x = cos(latRad) * cos(lngRad);
-            float y = cos(latRad) * sin(lngRad);
+        float y = cos(latRad) * sin(lngRad);
-            float z = sin(latRad);
+        float z = sin(latRad);
 
-            // To find mean values shortly
+        // To find mean values shortly
-            xAvg += x;
+        xAvg += x;
-            yAvg += y;
+        yAvg += y;
-            zAvg += z;
+        zAvg += z;
-            positionCount++;
+        positionCount++;
-        }
-
-        // All NodeDB processed, find mean values
-        xAvg /= positionCount;
-        yAvg /= positionCount;
-        zAvg /= positionCount;
-
-        // Longitude from cartesian coords
-        // (Angle from 3D coords describing a point of globe's surface)
-        /*
-                          UK
-                       /-------\
-        (Top View)   /-         -\
-                   /-      (You)  -\
-                 /-           .     -\
-               /-             . X     -\
-         Asia -             ...         - USA
-               \-           Y         -/
-                 \-                 -/
-                   \-             -/
-                     \-         -/
-                       \- -----/
-                       Pacific
-
-        */
-
-        *lng = atan2(yAvg, xAvg) * RAD_TO_DEG;
-
-        // Latitude from cartesian coords
-        // (Angle from 3D coords describing a point on the globe's surface)
-        // As latitude increases, distance from the Earth's north-south axis out to our surface point decreases.
-        // Means we need to first find the hypotenuse which becomes base of our triangle in the second step
-        /*
-                           UK                                         North
-                        /-------\                 (Front View)      /-------\
-         (Top View)   /-         -\                               /-         -\
-                    /-       (You) -\                           /-(You)        -\
-                  /-         /.      -\                       /-   .             -\
-                /-    √X²+Y²/ . X      -\                   /-   Z .               -\
-        Asia   -           /...          - USA             -       .....             -
-                \-           Y         -/                   \-     √X²+Y²          -/
-                  \-                 -/                       \-                 -/
-                    \-             -/                           \-             -/
-                      \-         -/                               \-         -/
-                        \- -----/                                   \- -----/
-                         Pacific                                      South
-        */
-
-        float hypotenuse = sqrt((xAvg * xAvg) + (yAvg * yAvg)); // Distance from globe's north-south axis to surface intersect
-        *lat = atan2(zAvg, hypotenuse) * RAD_TO_DEG;
     }
 
-    // Use either our node position, or the mean fallback as the center
+    // All NodeDB processed, find mean values
-    latCenter = *lat;
+    xAvg /= positionCount;
-    lngCenter = *lng;
+    yAvg /= positionCount;
+    zAvg /= positionCount;
+
+    // Longitude from cartesian coords
+    // (Angle from 3D coords describing a point of globe's surface)
+    /*
+                      UK
+                   /-------\
+    (Top View)   /-         -\
+               /-      (You)  -\
+             /-           .     -\
+           /-             . X     -\
+     Asia -             ...         - USA
+           \-           Y         -/
+             \-                 -/
+               \-             -/
+                 \-         -/
+                   \- -----/
+                   Pacific
+
+    */
+
+    *lng = atan2(yAvg, xAvg) * RAD_TO_DEG;
+
+    // Latitude from cartesian coords
+    // (Angle from 3D coords describing a point on the globe's surface)
+    // As latitude increases, distance from the Earth's north-south axis out to our surface point decreases.
+    // Means we need to first find the hypotenuse which becomes base of our triangle in the second step
+    /*
+                       UK                                         North
+                    /-------\                 (Front View)      /-------\
+     (Top View)   /-         -\                               /-         -\
+                /-       (You) -\                           /-(You)        -\
+              /-         /.      -\                       /-   .             -\
+            /-    √X²+Y²/ . X      -\                   /-   Z .               -\
+    Asia   -           /...          - USA             -       .....             -
+            \-           Y         -/                   \-     √X²+Y²          -/
+              \-                 -/                       \-                 -/
+                \-             -/                           \-             -/
+                  \-         -/                               \-         -/
+                    \- -----/                                   \- -----/
+                     Pacific                                      South
+    */
+
+    float hypotenuse = sqrt((xAvg * xAvg) + (yAvg * yAvg)); // Distance from globe's north-south axis to surface intersect
+    *lat = atan2(zAvg, hypotenuse) * RAD_TO_DEG;
 
     // ----------------------------------------------
-    // This has given us either:
+    // This has given us the "mean position"
-    // - our actual position (preferred), or
+    // This will be a position *somewhere* near the center of our nodes.
-    // - a mean position (fallback if we had no fix)
+    // What we actually want is to place our center so that our outermost nodes end up on the border of our map.
-    //
+    // The only real use of our "mean position" is to give us a reference frame:
-    // What we actually want is to place our center so that our outermost nodes
+    // which direction is east, and which is west.
-    // end up on the border of our map. The only real use of our "center" is to give
-    // us a reference frame: which direction is east, and which is west.
     //------------------------------------------------
 
-    // Find furthest nodes from our center
+    // Find furthest nodes from "mean lat long"
     // ========================================
+
     float northernmost = latCenter;
     float southernmost = latCenter;
     float easternmost = lngCenter;
     float westernmost = lngCenter;
 
-    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
         // Skip if no position
@@ -299,14 +184,14 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
             continue;
 
         // Check for a new top or bottom latitude
-        float latNode = node->position.latitude_i * 1e-7;
+        float lat = node->position.latitude_i * 1e-7;
-        northernmost = max(northernmost, latNode);
+        northernmost = max(northernmost, lat);
-        southernmost = min(southernmost, latNode);
+        southernmost = min(southernmost, lat);
 
         // Longitude is trickier
-        float lngNode = node->position.longitude_i * 1e-7;
+        float lng = node->position.longitude_i * 1e-7;
-        float degEastward = fmod(((lngNode - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
+        float degEastward = fmod(((lng - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
-        float degWestward = abs(fmod(((lngNode - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
+        float degWestward = abs(fmod(((lng - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
         if (degEastward < degWestward)
             easternmost = max(easternmost, lngCenter + degEastward);
         else
@@ -365,6 +250,7 @@ InkHUD::MapApplet::Marker InkHUD::MapApplet::calculateMarker(float lat, float ln
     m.hopsAway = hopsAway;
     return m;
 }
+
 // Draw a marker on the map for a node, with a shortname label, and backing box
 void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
 {
@@ -438,18 +324,6 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
         textX = labelX + paddingW;
     }
 
-    // Prevent overlap with scale bars and their labels
-    // Define a "safe zone" in the bottom-left where the scale bars and text are drawn
-    constexpr int16_t safeZoneHeight = 28; // adjust based on your label font height
-    constexpr int16_t safeZoneWidth = 60;  // adjust based on horizontal label width zone
-    bool overlapsScale = (labelY + labelH > height() - safeZoneHeight) && (labelX < safeZoneWidth);
-
-    // If it overlaps, shift label upward slightly above the safe zone
-    if (overlapsScale) {
-        labelY = height() - safeZoneHeight - labelH - 2;
-        textY = labelY + (labelH / 2);
-    }
-
     // Backing box
     fillRect(labelX, labelY, labelW, labelH, WHITE);
     drawRect(labelX, labelY, labelW, labelH, BLACK);
@@ -474,8 +348,8 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
 // Need at least two, to draw a sensible map
 bool InkHUD::MapApplet::enoughMarkers()
 {
-    size_t count = 0;
+    uint8_t count = 0;
-    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
         // Count nodes

src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp

@@ -127,11 +127,6 @@ void InkHUD::NodeListApplet::onRender()
     // Y value (top) of the current card. Increases as we draw.
     uint16_t cardTopY = headerDivY + padDivH;
 
-    // Clean up deleted nodes before drawing
-    cards.erase(
-        std::remove_if(cards.begin(), cards.end(), [](const CardInfo &c) { return nodeDB->getMeshNode(c.nodeNum) == nullptr; }),
-        cards.end());
-
     // -- Each node in list --
     for (auto card = cards.begin(); card != cards.end(); ++card) {
 
@@ -146,11 +141,6 @@ void InkHUD::NodeListApplet::onRender()
 
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeNum);
 
-        // Skip deleted nodes
-        if (!node) {
-            continue;
-        }
-
         // -- Shortname --
         // Parse special chars in the short name
         // Use "?" if unknown
@@ -198,7 +188,7 @@ void InkHUD::NodeListApplet::onRender()
             drawSignalIndicator(signalX, signalY, signalW, signalH, signal);
         }
         // Otherwise, print "hops away" info, if available
-        else if (hopsAway != CardInfo::HOPS_UNKNOWN && node) {
+        else if (hopsAway != CardInfo::HOPS_UNKNOWN) {
             std::string hopString = to_string(node->hops_away);
             hopString += " Hop";
             if (node->hops_away != 1)

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -709,7 +709,7 @@ void InkHUD::MenuApplet::drawSystemInfoPanel(int16_t left, int16_t top, uint16_t
     // Voltage
     float voltage = powerStatus->getBatteryVoltageMv() / 1000.0;
     char voltageStr[6]; // "XX.XV"
-    sprintf(voltageStr, "%.2fV", voltage);
+    sprintf(voltageStr, "%.1fV", voltage);
     printAt(colC[0], labelT, "Bat", CENTER, TOP);
     printAt(colC[0], valT, voltageStr, CENTER, TOP);