apply 180 degree hw roration Indicator BaseUI

* Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting!
* move define to ini file

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v4
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_firmware.yml

@@ -20,7 +20,7 @@ jobs:
     name: build-${{ inputs.platform }}
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -42,7 +42,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v5
         with:
           python-version: 3.x
@@ -72,7 +72,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -93,7 +93,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -288,12 +288,12 @@ jobs:
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -322,7 +322,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -367,7 +367,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
@@ -386,14 +386,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -436,14 +436,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -460,7 +460,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -491,14 +491,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -60,7 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v5

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -1,6 +1,6 @@
 version: 0.1
 cli:
-  version: 1.24.0
+  version: 1.25.0
 plugins:
   sources:
     - id: trunk
@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.451
-    - renovate@41.40.0
+    - checkov@3.2.461
+    - renovate@41.71.1
     - prettier@3.6.2
-    - trufflehog@3.90.1
+    - trufflehog@3.90.4
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.64.1
     - taplo@0.9.3
-    - ruff@0.12.4
+    - ruff@0.12.7
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-bookworm AS builder
+FROM python:3.13-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:bookworm-slim
+FROM debian:trixie-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
+        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7t64 libssl3t64 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -17,7 +17,6 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -35,6 +34,7 @@ lib_deps =
 
 build_flags =
   ${arduino_base.build_flags}
+  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.6" date="2025-08-12">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
+    </release>
     <release version="2.7.5" date="2025-08-09">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
     </release>

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.5.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.6.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -37,4 +37,7 @@ meshtasticd (2.7.5.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Sat, 09 Aug 2025 12:46:53 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Tue, 12 Aug 2025 23:48:48 +0000

platformio.ini

@@ -61,8 +61,8 @@ monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
 	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
-	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
-	mathertel/OneButton@2.6.1
+	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
+	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -102,6 +102,14 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib

src/BluetoothStatus.h

@@ -89,14 +89,22 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, LOW);
+#else
                 digitalWrite(BLE_LED, HIGH);
+#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, HIGH);
+#else
                 digitalWrite(BLE_LED, LOW);
+#endif
 #endif
                 break;
             }

src/buzz/buzz.cpp

@@ -140,6 +140,10 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
+
+    if (leadUpNoteIndex >= leadUpNotesCount) {
+        return false; // this was the final note
+    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/graphics/EInkDisplay2.cpp

@@ -140,13 +140,13 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#ifdef ELECROW_ThinkNode_M1
+#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);

src/graphics/Screen.cpp

@@ -365,9 +365,6 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
-#ifdef PIN_EINK_EN
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
-#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -391,8 +388,12 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             dispdev->displayOn();
 #endif
 
-#ifdef ELECROW_ThinkNode_M5
-            io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+#ifdef PIN_EINK_EN
+            if (uiconfig.screen_brightness == 1)
+                digitalWrite(PIN_EINK_EN, HIGH);
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1)
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
 #if defined(ST7789_CS) &&                                                                                                        \
@@ -424,13 +425,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-#ifdef ELECROW_ThinkNode_M1
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
-                digitalWrite(PIN_EINK_EN, LOW);
-            }
-#endif
 
-#ifdef ELECROW_ThinkNode_M5
+#ifdef PIN_EINK_EN
+            digitalWrite(PIN_EINK_EN, LOW);
+#elif defined(PCA_PIN_EINK_EN)
             io.digitalWrite(PCA_PIN_EINK_EN, LOW);
 #endif
 
@@ -694,7 +692,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        menuHandler::LoraRegionPicker(0);
+        menuHandler::OnboardMessage();
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef CROWPANEL_ESP32S3_5_EPAPER
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,6 +40,9 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
+#ifdef OLED_RU
+#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
+#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -50,9 +53,13 @@
 #endif
 #endif
 #endif
+#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
+#ifdef OLED_RU
+#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
+#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -63,6 +70,7 @@
 #endif
 #endif
 #endif
+#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
@@ -77,7 +85,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/TFTDisplay.cpp

@@ -849,9 +849,29 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
+class PanelInit_ST7701 : public lgfx::Panel_ST7701
+{
+  public:
+    const uint8_t *getInitCommands(uint8_t listno) const override
+    {
+        // 180 degree hw rotation: vertical flip, horizontal flip
+        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
+                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
+                                                  0xFF, 0xFF};
+        switch (listno) {
+        case 1:
+            return list1;
+        default:
+            return lgfx::Panel_ST7701::getInitCommands(listno);
+        }
+    }
+};
+
 class LGFX : public lgfx::LGFX_Device
 {
-    lgfx::Panel_ST7701 _panel_instance;
+    PanelInit_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -1184,9 +1204,9 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
+#elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR)
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label

src/graphics/draw/MenuHandler.cpp

@@ -26,6 +26,27 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
+void menuHandler::OnboardMessage()
+{
+    static const char *optionsArray[] = {"OK", "Got it!"};
+    enum optionsNumbers { OK, got };
+    BannerOverlayOptions bannerOptions;
+#if HAS_TFT
+    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
+#elif defined(BUTTON_PIN)
+    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
+#else
+    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
+#endif
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 2;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
+        screen->runNow();
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -318,7 +339,7 @@ void menuHandler::homeBaseMenu()
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-#ifdef PIN_EINK_EN
+#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
@@ -342,12 +363,24 @@ void menuHandler::homeBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#ifdef PIN_EINK_EN
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
+#if defined(PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
+                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
+            saveUIConfig();
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
+                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
+            } else {
+                uiconfig.screen_brightness = 1;
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+            }
+            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -1120,6 +1153,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case lora_picker:
         LoraRegionPicker();
         break;
+    case no_timeout_lora_picker:
+        LoraRegionPicker(0);
+        break;
     case TZ_picker:
         TZPicker();
         break;

src/graphics/draw/MenuHandler.h

@@ -10,6 +10,7 @@ class menuHandler
     enum screenMenus {
         menu_none,
         lora_picker,
+        no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
         clock_face_picker,
@@ -41,6 +42,7 @@ class menuHandler
     };
     static screenMenus menuQueue;
 
+    static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void handleMenuSwitch(OLEDDisplay *display);
     static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);

src/graphics/draw/MessageRenderer.cpp

@@ -137,7 +137,11 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, textChunk.c_str());
             }
             display->drawString(cursorX, fontY, textChunk.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(textChunk.c_str(), textChunk.length(), true);
+#else
             cursorX += display->getStringWidth(textChunk.c_str());
+#endif
             i = nextControl;
             continue;
         }
@@ -155,7 +159,12 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, remaining.c_str());
             }
             display->drawString(cursorX, fontY, remaining.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(remaining.c_str(), remaining.length(), true);
+#else
             cursorX += display->getStringWidth(remaining.c_str());
+#endif
+
             break;
         }
     }
@@ -374,10 +383,16 @@ std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerS
         } else {
             word += ch;
             std::string test = line + word;
-            // Keep these lines for diagnostics
-            // LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
-            // LOG_INFO("Current String: %s", test.c_str());
-            if (display->getStringWidth(test.c_str()) > textWidth) {
+// Keep these lines for diagnostics
+// LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
+// LOG_INFO("Current String: %s", test.c_str());
+// Note: there are boolean comparison uint16 (getStringWidth) with int (textWidth), hope textWidth is always positive :)
+#if defined(OLED_UA) || defined(OLED_RU)
+            uint16_t strWidth = display->getStringWidth(test.c_str(), test.length(), true);
+#else
+            uint16_t strWidth = display->getStringWidth(test.c_str());
+#endif
+            if (strWidth > textWidth) {
                 if (!line.empty())
                     lines.push_back(line);
                 line = word;

src/graphics/draw/NotificationRenderer.cpp

@@ -383,7 +383,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     uint8_t firstOptionToShow = 0;
     if (alertBannerOptions > 0) {
-        if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
+        if (visibleTotalLines - lineCount == 1) {
+            firstOptionToShow = curSelected;
+        } else if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
             if (curSelected > alertBannerOptions - visibleTotalLines + lineCount)
                 firstOptionToShow = alertBannerOptions - visibleTotalLines + lineCount;
             else
@@ -392,6 +394,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
             firstOptionToShow = 0;
         }
     }
+    // Useful log line for troubleshooting:
+    /* LOG_WARN("alertBannerOptions: %u, curSelected: %u, visibleTotalLines: %u, lineCount: %u, firstOptionToShow: %u",
+             alertBannerOptions, curSelected, visibleTotalLines, lineCount, firstOptionToShow); */
 
     for (int i = firstOptionToShow; i < alertBannerOptions && linesShown < visibleTotalLines; i++, linesShown++) {
         if (i == curSelected) {

src/graphics/fonts/EinkDisplayFonts.cpp

@@ -1,3 +1,5 @@
+#ifdef USE_EINK
+
 #include "EinkDisplayFonts.h"
 
 // Created by https://oleddisplay.squix.ch/ Consider a donation
@@ -1182,3 +1184,5 @@ const uint8_t Monospaced_plain_30[] PROGMEM = {
     0xF0, 0xFF, 0x01, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0xE0, 0x00, 0xFE, 0x03, 0x00, 0xE0, 0x80, 0x7F,
     0x00, 0x00, 0xE0, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x10 // 255
 };
+
+#endif // USE_EINK

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,6 +1,8 @@
 #ifndef EINKDISPLAYFONTS_h
 #define EINKDISPLAYFONTS_h
 
+#ifdef USE_EINK
+
 #ifdef ARDUINO
 #include <Arduino.h>
 #elif __MBED__
@@ -11,4 +13,7 @@
  * Monospaced Plain 30
  */
 extern const uint8_t Monospaced_plain_30[] PROGMEM;
+
+#endif // USE_EINK
+
 #endif

src/graphics/fonts/OLEDDisplayFontsCS.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_CS
+
 #include "OLEDDisplayFontsCS.h"
 
 // Font generated or edited with the glyphEditor
@@ -1860,4 +1862,6 @@ const uint8_t ArialMT_Plain_24_CS[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00,
     0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00,
     0x06, // 255
-};
+};
+
+#endif // OLED_CS

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -1,4 +1,5 @@
 // trunk-ignore-all(clang-format): Preserve long lines
+#ifdef OLED_PL
 #include "OLEDDisplayFontsPL.h"
 
 const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
@@ -1310,4 +1311,6 @@ const uint8_t ArialMT_Plain_24_PL[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 253
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 255
-};
+};
+
+#endif // OLED_PL

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -8,4 +8,6 @@
 #endif
 
 extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_16_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_24_RU[] PROGMEM;
 #endif

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_UA
+
 #include "OLEDDisplayFontsUA.h"
 
 // Font generated or edited with the glyphEditor
@@ -1920,4 +1922,6 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00,
     0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8,
     0xFF, // 1103
-};
+};
+
+#endif // OLED_UA

src/input/ButtonThread.cpp

@@ -92,8 +92,11 @@ bool ButtonThread::initButton(const ButtonConfig &config)
     if (config.shortLong != INPUT_BROKER_NONE) {
         _shortLong = config.shortLong;
     }
-
+#ifdef USE_EINK
+    userButton.setDebounceMs(0);
+#else
     userButton.setDebounceMs(1);
+#endif
     userButton.setPressMs(_longPressTime);
 
     if (screen) {
@@ -137,8 +140,7 @@ int32_t ButtonThread::runOnce()
     }
 
     // Progressive lead-up sound system
-    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS &&
-        (millis() - buttonPressStartTime) < _longLongPressTime) {
+    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
 
         // Start the progressive sequence if not already active
         if (!leadUpSequenceActive) {
@@ -150,13 +152,14 @@ int32_t ButtonThread::runOnce()
         else if ((millis() - lastLeadUpNoteTime) >= 400) { // 400ms interval between notes
             if (playNextLeadUpNote()) {
                 lastLeadUpNoteTime = millis();
+            } else {
+                leadUpPlayed = true;
             }
         }
     }
 
     // Reset when button is released
     if (!buttonCurrentlyPressed && buttonWasPressed) {
-        leadUpPlayed = false;
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
@@ -253,12 +256,13 @@ int32_t ButtonThread::runOnce()
 
             LOG_INFO("LONG PRESS RELEASE AFTER %u MILLIS", millis() - buttonPressStartTime);
             if (millis() > 30000 && _longLongPress != INPUT_BROKER_NONE &&
-                (millis() - buttonPressStartTime) >= _longLongPressTime) {
+                (millis() - buttonPressStartTime) >= _longLongPressTime && leadUpPlayed) {
                 evt.inputEvent = _longLongPress;
                 this->notifyObservers(&evt);
             }
             // Reset combination tracking
             waitingForLongPress = false;
+            leadUpPlayed = false;
 
             break;
         }

src/input/ButtonThread.h

@@ -92,7 +92,7 @@ class ButtonThread : public Observable<const InputEvent *>, public concurrency::
 
     voidFuncPtr _intRoutine = nullptr;
     uint16_t _longPressTime = 500;
-    uint16_t _longLongPressTime = 5000;
+    uint16_t _longLongPressTime = 3900;
     int _pinNum = 0;
     bool _activeLow = true;
     bool _touchQuirk = false;

src/main.cpp

@@ -304,7 +304,6 @@ void setup()
     Wire.begin(48, 47);
     io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
     io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
-    io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
     io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
     // io.pinMode(C2_PIN, OUTPUT);
 #endif
@@ -326,8 +325,12 @@ void setup()
 
 #ifdef BLE_LED
     pinMode(BLE_LED, OUTPUT);
+#ifdef BLE_LED_INVERTED
+    digitalWrite(BLE_LED, HIGH);
+#else
     digitalWrite(BLE_LED, LOW);
 #endif
+#endif
 
 #if defined(T_DECK)
     // GPIO10 manages all peripheral power supplies

src/mesh/FloodingRouter.cpp

@@ -47,8 +47,10 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
 {
     if (config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER &&
         config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER &&
-        config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
+        config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_LATE &&
+        p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
         // cancel rebroadcast of this message *if* there was already one, unless we're a router/repeater!
+        // But only LoRa packets should be able to trigger this.
         if (Router::cancelSending(p->from, p->id))
             txRelayCanceled++;
     }

src/mesh/MeshModule.cpp

@@ -85,8 +85,11 @@ meshtastic_MeshPacket *MeshModule::allocErrorResponse(meshtastic_Routing_Error e
     return r;
 }
 
-void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
+void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src, const char *specificModule)
 {
+    if (specificModule) {
+        LOG_DEBUG("Calling specific module: %s", specificModule);
+    }
     // LOG_DEBUG("In call modules");
     bool moduleFound = false;
 
@@ -104,6 +107,11 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
     for (auto i = modules->begin(); i != modules->end(); ++i) {
         auto &pi = **i;
 
+        // If specificModule is provided, only call that specific module
+        if (specificModule && (!pi.name || strcmp(pi.name, specificModule) != 0)) {
+            continue;
+        }
+
         pi.currentRequest = ∓
 
         /// We only call modules that are interested in the packet (and the message is destined to us or we are promiscious)

src/mesh/MeshModule.h

@@ -73,7 +73,7 @@ class MeshModule
 
     /** For use only by MeshService
      */
-    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO);
+    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO, const char *specificModule = nullptr);
 
     static std::vector<MeshModule *> GetMeshModulesWithUIFrames(int startIndex);
     static void observeUIEvents(Observer<const UIFrameEvent *> *observer);

src/mesh/NodeDB.cpp

@@ -1631,24 +1631,33 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
         printBytes("Incoming Pubkey: ", p.public_key.bytes, 32);
 
         // Alert the user if a remote node is advertising public key that matches our own
-        if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0 && !duplicateWarned) {
-            duplicateWarned = true;
-            char warning[] = "Remote device %s has advertised your public key. This may indicate a compromised key. You may need "
-                             "to regenerate your public keys.";
-            LOG_WARN(warning, p.long_name);
-            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
-            cn->level = meshtastic_LogRecord_Level_WARNING;
-            cn->time = getValidTime(RTCQualityFromNet);
-            sprintf(cn->message, warning, p.long_name);
-            service->sendClientNotification(cn);
+        if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0) {
+            if (!duplicateWarned) {
+                duplicateWarned = true;
+                char warning[] =
+                    "Remote device %s has advertised your public key. This may indicate a compromised key. You may need "
+                    "to regenerate your public keys.";
+                LOG_WARN(warning, p.long_name);
+                meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+                cn->level = meshtastic_LogRecord_Level_WARNING;
+                cn->time = getValidTime(RTCQualityFromNet);
+                sprintf(cn->message, warning, p.long_name);
+                service->sendClientNotification(cn);
+            }
+            return false;
         }
     }
-    if (info->user.public_key.size > 0) { // if we have a key for this user already, don't overwrite with a new one
+    if (info->user.public_key.size == 32) { // if we have a key for this user already, don't overwrite with a new one
+        // if the key doesn't match, don't update nodeDB at all.
+        if (p.public_key.size != 32 || (memcmp(p.public_key.bytes, info->user.public_key.bytes, 32) != 0)) {
+            LOG_WARN("Public Key mismatch, dropping NodeInfo");
+            return false;
+        }
         LOG_INFO("Public Key set for node, not updating!");
         // we copy the key into the incoming packet, to prevent overwrite
         p.public_key.size = 32;
         memcpy(p.public_key.bytes, info->user.public_key.bytes, 32);
-    } else if (p.public_key.size > 0) {
+    } else if (p.public_key.size == 32) {
         LOG_INFO("Update Node Pubkey!");
     }
 #endif
@@ -1867,7 +1876,7 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
         uint8_t keyHash[32] = {0};
         memcpy(keyHash, keyToTest.bytes, keyToTest.size);
         crypto->hash(keyHash, 32);
-        for (int i = 0; i < sizeof(LOW_ENTROPY_HASHES) / sizeof(LOW_ENTROPY_HASHES[0]); i++) {
+        for (uint16_t i = 0; i < sizeof(LOW_ENTROPY_HASHES) / sizeof(LOW_ENTROPY_HASHES[0]); i++) {
             if (memcmp(keyHash, LOW_ENTROPY_HASHES[i], sizeof(LOW_ENTROPY_HASHES[0])) == 0) {
                 return true;
             }

src/mesh/RadioInterface.cpp

@@ -170,11 +170,10 @@ const RegionInfo regions[] = {
     */
     RDEF(KZ_433, 433.075f, 434.775f, 100, 0, 10, true, false, false), RDEF(KZ_863, 863.0f, 868.0f, 100, 0, 30, true, false, true),
 
-
     /*
         Nepal
-        865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use, specifically in non-cellular mode.
-        https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
+        865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use,
+       specifically in non-cellular mode. https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
     */
     RDEF(NP_865, 865.0f, 868.0f, 100, 0, 30, true, false, false),
 
@@ -336,8 +335,9 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr)
 void printPacket(const char *prefix, const meshtastic_MeshPacket *p)
 {
 #if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
-    std::string out = DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%08x to=0x%08x, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id,
-                                            p->from, p->to, p->want_ack, p->hop_limit, p->channel);
+    std::string out =
+        DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%08x to=0x%08x, transport = %u, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id,
+                              p->from, p->to, p->transport_mechanism, p->want_ack, p->hop_limit, p->channel);
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
         auto &s = p->decoded;
 
@@ -666,8 +666,10 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
 
 void RadioInterface::deliverToReceiver(meshtastic_MeshPacket *p)
 {
-    if (router)
+    if (router) {
+        p->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA;
         router->enqueueReceivedMessage(p);
+    }
 }
 
 /***

src/mesh/Router.cpp

@@ -652,7 +652,8 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
     }
 
     // call modules here
-    if (!skipHandle) {
+    // If this could be a spoofed packet, don't let the modules see it.
+    if (!skipHandle && p->from != nodeDB->getNodeNum()) {
         MeshModule::callModules(*p, src);
 
 #if !MESHTASTIC_EXCLUDE_MQTT
@@ -666,6 +667,8 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
             !isFromUs(p) && mqtt)
             mqtt->onSend(*p_encrypted, *p, p->channel);
 #endif
+    } else if (p->from == nodeDB->getNodeNum() && !skipHandle) {
+        MeshModule::callModules(*p, src, ROUTING_MODULE);
     }
 
     packetPool.release(p_encrypted); // Release the encrypted packet

src/mesh/api/PacketAPI.cpp

@@ -59,6 +59,7 @@ bool PacketAPI::receivePacket(void)
         switch (mr->which_payload_variant) {
         case meshtastic_ToRadio_packet_tag: {
             meshtastic_MeshPacket *mp = &mr->packet;
+            mp->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_API;
             printPacket("PACKET FROM QUEUE", mp);
             service->handleToRadio(*mp);
             break;

src/mesh/generated/meshtastic/mesh.pb.h

@@ -270,6 +270,8 @@ typedef enum _meshtastic_HardwareModel {
     /* MeshSolar is an integrated power management and communication solution designed for outdoor low-power devices.
  https://heltec.org/project/meshsolar/ */
     meshtastic_HardwareModel_HELTEC_MESH_SOLAR = 108,
+    /* Lilygo T-Echo Lite */
+    meshtastic_HardwareModel_T_ECHO_LITE = 109,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/udp/UdpMulticastHandler.h

@@ -50,6 +50,7 @@ class UdpMulticastHandler final
         LOG_DEBUG("UDP broadcast from: %s, len=%u", packet.remoteIP().toString().c_str(), packetLength);
 #endif
         meshtastic_MeshPacket mp;
+        mp.transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MULTICAST_UDP;
         LOG_DEBUG("Decoding MeshPacket from UDP len=%u", packetLength);
         bool isPacketDecoded = pb_decode_from_bytes(packet.data(), packetLength, &meshtastic_MeshPacket_msg, &mp);
         if (isPacketDecoded && router && mp.which_payload_variant == meshtastic_MeshPacket_encrypted_tag) {
@@ -78,6 +79,9 @@ class UdpMulticastHandler final
             return false;
         }
 #endif
+        if (mp->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MULTICAST_UDP) {
+            LOG_ERROR("Attempt to send UDP sourced packet over UDP");
+        }
         LOG_DEBUG("Broadcasting packet over UDP (id=%u)", mp->id);
         uint8_t buffer[meshtastic_MeshPacket_size];
         size_t encodedLength = pb_encode_to_bytes(buffer, sizeof(buffer), &meshtastic_MeshPacket_msg, mp);

src/modules/CannedMessageModule.cpp

@@ -78,16 +78,15 @@ void CannedMessageModule::LaunchWithDestination(NodeNum newDest, uint8_t newChan
     lastDestSet = true;
 
     // Rest of function unchanged...
-    // Always select the first real canned message on activation
-    int firstRealMsgIdx = 0;
+    // Upon activation, highlight "[Select Destination]"
+    int selectDestination = 0;
     for (int i = 0; i < messagesCount; ++i) {
-        if (strcmp(messages[i], "[Select Destination]") != 0 && strcmp(messages[i], "[Exit]") != 0 &&
-            strcmp(messages[i], "[---- Free Text ----]") != 0) {
-            firstRealMsgIdx = i;
+        if (strcmp(messages[i], "[Select Destination]") == 0) {
+            selectDestination = i;
             break;
         }
     }
-    currentMessageIndex = firstRealMsgIdx;
+    currentMessageIndex = selectDestination;
 
     // This triggers the canned message list
     runState = CANNED_MESSAGE_RUN_STATE_ACTIVE;
@@ -999,17 +998,16 @@ int32_t CannedMessageModule::runOnce()
         this->notifyObservers(&e);
         return 2000;
     }
-    // Always highlight the first real canned message when entering the message list
+    // Highlight [Select Destination] initially when entering the message list
     else if ((this->runState != CANNED_MESSAGE_RUN_STATE_FREETEXT) && (this->currentMessageIndex == -1)) {
-        int firstRealMsgIdx = 0;
+        int selectDestination = 0;
         for (int i = 0; i < this->messagesCount; ++i) {
-            if (strcmp(this->messages[i], "[Select Destination]") != 0 && strcmp(this->messages[i], "[Exit]") != 0 &&
-                strcmp(this->messages[i], "[---- Free Text ----]") != 0) {
-                firstRealMsgIdx = i;
+            if (strcmp(this->messages[i], "[Select Destination]") == 0) {
+                selectDestination = i;
                 break;
             }
         }
-        this->currentMessageIndex = firstRealMsgIdx;
+        this->currentMessageIndex = selectDestination;
         e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
         this->runState = CANNED_MESSAGE_RUN_STATE_ACTIVE;
     } else if (this->runState == CANNED_MESSAGE_RUN_STATE_ACTION_UP) {

src/modules/NodeInfoModule.cpp

@@ -14,6 +14,10 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 {
     auto p = *pptr;
 
+    if (mp.from == nodeDB->getNodeNum()) {
+        LOG_WARN("Ignoring packet supposed to be from our own node: %08x", mp.from);
+        return false;
+    }
     if (p.is_licensed != owner.is_licensed) {
         LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
         return true;

src/modules/RoutingModule.cpp

@@ -73,7 +73,7 @@ uint8_t RoutingModule::getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit
     return Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit); // Use the default hop limit
 }
 
-RoutingModule::RoutingModule() : ProtobufModule("routing", meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
+RoutingModule::RoutingModule() : ProtobufModule(ROUTING_MODULE, meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
 {
     isPromiscuous = true;
 

src/modules/RoutingModule.h

@@ -2,6 +2,8 @@
 #include "Channels.h"
 #include "ProtobufModule.h"
 
+static const char *ROUTING_MODULE = "routing";
+
 /**
  * Routing module for router control messages
  */

src/modules/SerialModule.cpp

@@ -60,7 +60,7 @@
 SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
-#if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
+#if defined(TTGO_T_ECHO) || defined(T_ECHO_LITE) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||  \
     defined(ELECROW_ThinkNode_M5)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
@@ -179,8 +179,8 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-#elif !defined(TTGO_T_ECHO) && !defined(CANARYONE) && !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) &&                    \
-    !defined(ELECROW_ThinkNode_M5)
+#elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                             \
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
                 Serial2.setFIFOSize(RX_BUFFER);
@@ -236,8 +236,8 @@ int32_t SerialModule::runOnce()
                 }
             }
 
-#if !defined(TTGO_T_ECHO) && !defined(CANARYONE) && !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) &&                      \
-    !defined(ELECROW_ThinkNode_M5)
+#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                               \
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
 
@@ -496,8 +496,8 @@ ParsedLine parseLine(const char *line)
  */
 void SerialModule::processWXSerial()
 {
-#if !defined(TTGO_T_ECHO) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(MESHLINK) &&                 \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/TraceRouteModule.cpp

@@ -602,7 +602,7 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
             int start = 0;
             int newlinePos = resultText.indexOf('\n', start);
 
-            while (newlinePos != -1 || start < resultText.length()) {
+            while (newlinePos != -1 || start < static_cast<int>(resultText.length())) {
                 String segment;
                 if (newlinePos != -1) {
                     segment = resultText.substring(start, newlinePos);
@@ -624,7 +624,7 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
                         int lastGoodBreak = -1;
                         bool lineComplete = false;
 
-                        for (int i = 0; i < remaining.length(); i++) {
+                        for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
                             char ch = remaining.charAt(i);
                             String testLine = tempLine + ch;
 

src/mqtt/MQTT.cpp

@@ -95,6 +95,7 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
     p->hop_start = e.packet->hop_start;
     p->want_ack = e.packet->want_ack;
     p->via_mqtt = true; // Mark that the packet was received via MQTT
+    p->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MQTT;
     p->which_payload_variant = e.packet->which_payload_variant;
     memcpy(&p->decoded, &e.packet->decoded, std::max(sizeof(p->decoded), sizeof(p->encrypted)));
 

src/nimble/NimbleBluetooth.cpp

@@ -223,9 +223,12 @@ void NimbleBluetooth::deinit()
     LOG_INFO("Disable bluetooth until reboot");
 
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+    digitalWrite(BLE_LED, HIGH);
+#else
     digitalWrite(BLE_LED, LOW);
 #endif
-
+#endif
     NimBLEDevice::deinit();
 #endif
 }

src/platform/nrf52/architecture.h

@@ -53,10 +53,15 @@
 #define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAG
 #elif defined(GAT562_MESH_TRIAL_TRACKER)
 #define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
+#elif defined(NOMADSTAR_METEOR_PRO)
+#define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
+// MAke sure all custom RAK4630 boards are defined before the generic RAK4630
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
 #elif defined(TTGO_T_ECHO)
 #define HW_VENDOR meshtastic_HardwareModel_T_ECHO
+#elif defined(T_ECHO_LITE)
+#define HW_VENDOR meshtastic_HardwareModel_T_ECHO_LITE
 #elif defined(ELECROW_ThinkNode_M1)
 #define HW_VENDOR meshtastic_HardwareModel_THINKNODE_M1
 #elif defined(NANO_G2_ULTRA)
@@ -89,8 +94,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_SOLAR_NODE
 #elif defined(HELTEC_MESH_POCKET)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_POCKET
-#elif defined(NOMADSTAR_METEOR_PRO)
-#define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
 #elif defined(SEEED_WIO_TRACKER_L1_EINK)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK
 #elif defined(SEEED_WIO_TRACKER_L1)

src/platform/nrf52/main-nrf52.cpp

@@ -282,10 +282,14 @@ void cpuDeepSleep(uint32_t msecToWake)
 #if SPI_INTERFACES_COUNT > 1
     SPI1.end();
 #endif
-    // This may cause crashes as debug messages continue to flow.
-    Serial.end();
+    if (Serial)       // Another check in case of disabled default serial, does nothing bad
+        Serial.end(); // This may cause crashes as debug messages continue to flow.
+
+        // This causes troubles with waking up on nrf52 (on pro-micro in particular):
+        // we have no Serial1 in use on nrf52, check Serial and GPS modules.
 #ifdef PIN_SERIAL1_RX
-    Serial1.end();
+    if (Serial1) // A straightforward solution to the wake from deepsleep problem
+        Serial1.end();
 #endif
     setBluetoothEnable(false);
 
@@ -362,6 +366,7 @@ void cpuDeepSleep(uint32_t msecToWake)
         // Resume on user button press
         // https://github.com/lyusupov/SoftRF/blob/81c519ca75693b696752235d559e881f2e0511ee/software/firmware/source/SoftRF/src/platform/nRF52.cpp#L1738
         constexpr uint32_t DFU_MAGIC_SKIP = 0x6d;
+        sd_power_gpregret_clr(0, 0xFF);           // Clear the register before setting a new values in it for stability reasons
         sd_power_gpregret_set(0, DFU_MAGIC_SKIP); // Equivalent NRF_POWER->GPREGRET = DFU_MAGIC_SKIP
 
         // FIXME, use system off mode with ram retention for key state?
@@ -378,6 +383,12 @@ void cpuDeepSleep(uint32_t msecToWake)
         nrf_gpio_cfg_sense_set(PIN_BUTTON2, sense1);
 #endif
 
+#ifdef PROMICRO_DIY_TCXO
+        nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); // Enable internal pull-up on the button pin
+        nrf_gpio_pin_sense_t sense = NRF_GPIO_PIN_SENSE_LOW; // Configure SENSE signal on low edge
+        nrf_gpio_cfg_sense_set(BUTTON_PIN, sense);           // Apply SENSE to wake up the device from the deep sleep
+#endif
+
         auto ok = sd_power_system_off();
         if (ok != NRF_SUCCESS) {
             LOG_ERROR("FIXME: Ignoring soft device (EasyDMA pending?) and forcing system-off!");

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -61,7 +61,7 @@
 #define LORA_DIO1 SX126X_DIO1
 
 #define USE_EINK
-#define PIN_EINK_EN -1    // Note: this is really just backlight power
+// Note: this is really just backlight power
 #define PCA_PIN_EINK_EN 5 // This is the pin number on the GPIO expander
 #define PIN_EINK_CS 39
 #define PIN_EINK_BUSY 42

variants/native/portduino/platformio.ini

@@ -1,7 +1,6 @@
 [native_base]
 extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
-  -D ARCH_PORTDUINO
   -I /usr/include
 board = cross_platform
 lib_deps = ${portduino_base.lib_deps}

variants/nrf52840/rak2560/platformio.ini

@@ -11,10 +11,10 @@ build_flags = ${nrf52840_base.build_flags}
   -DRADIOLIB_EXCLUDE_SX127X=1
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAS_RAKPROT=1 ; Define if RAk OneWireSerial is used (disables GPS)
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak2560> +<mesh/api/> +<mqtt/>
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak2560> +<mesh/api/> +<mqtt/> +<serialization/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  ${networking_base.lib_deps}
+  ${nrf52_networking_base.lib_deps}
   melopero/Melopero RV3028@^1.1.0
   https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink

variants/nrf52840/rak4631/platformio.ini

@@ -17,7 +17,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  ${networking_base.lib_deps}
+  ${nrf52_networking_base.lib_deps}
   melopero/Melopero RV3028@^1.1.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2

variants/nrf52840/rak4631_eth_gw/platformio.ini

@@ -24,7 +24,7 @@ build_flags = ${nrf52840_base.build_flags}
   -DMESHTASTIC_EXCLUDE_STOREFORWARD=1
   -DMESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
   -DMESHTASTIC_EXCLUDE_WAYPOINT=1
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631_eth_gw> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631_eth_gw> +<mesh/eth/> +<mesh/api/> +<mqtt/> +<serialization/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}

variants/nrf52840/rak_wismeshtap/platformio.ini

@@ -18,7 +18,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak_wismeshtap> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
-  ${networking_base.lib_deps}
+  ${nrf52_networking_base.lib_deps}
   melopero/Melopero RV3028@^1.1.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2

variants/nrf52840/t-echo-lite/platformio.ini

@@ -0,0 +1,25 @@
+; Using original screen class
+[env:t-echo-lite]
+extends = nrf52840_base
+board = t-echo
+board_check = true
+debug_tool = jlink
+
+# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
+build_flags = ${nrf52840_base.build_flags}
+  -Ivariants/nrf52840/t-echo-lite
+  -D T_ECHO_LITE
+  -D GPS_POWER_TOGGLE
+  -D EINK_DISPLAY_MODEL=GxEPD2_122_T61
+  -D EINK_WIDTH=192
+  -D EINK_HEIGHT=176
+  -D USE_EINK
+  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -D EINK_LIMIT_FASTREFRESH=20          ; How many consecutive fast-refreshes are permitted
+  -D EINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/t-echo-lite>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
+;upload_protocol = fs

variants/nrf52840/t-echo-lite/variant.cpp

@@ -0,0 +1,44 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    pinMode(PIN_LED3, OUTPUT);
+    ledOff(PIN_LED3);
+}

variants/nrf52840/t-echo-lite/variant.h

@@ -0,0 +1,207 @@
+/*
+ Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+ Copyright (c) 2016 Sandeep Mistry All right reserved.
+ Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_TTGO_EINK_V1_0_
+#define _VARIANT_TTGO_EINK_V1_0_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (32 + 7) // Green LED
+#define PIN_LED2 (32 + 5) // Blue LED
+// Unused(by firmware) LEDs:
+#define PIN_LED3 (32 + 14) // Red LED inside, under the display.
+
+#define LED_RED PIN_LED3
+#define LED_BLUE PIN_LED2
+#define LED_GREEN PIN_LED1
+
+#define BLE_LED LED_BLUE
+#define BLE_LED_INVERTED 1
+#define LED_BUILTIN LED_GREEN
+#define LED_CONN LED_GREEN
+#define LED_STATE_ON 0 // State when LED is lit
+
+// Buttons
+#define PIN_BUTTON1 (0 + 24)
+#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
+
+#define BUTTON_CLICK_MS 400
+
+// Analog pins
+#define PIN_A0 (0 + 2) // Battery ADC
+
+#define BATTERY_PIN PIN_A0
+
+static const uint8_t A0 = PIN_A0;
+
+#define ADC_RESOLUTION 14
+
+#define ADC_CTRL (0 + 31)
+#define ADC_CTRL_ENABLED HIGH
+
+// NFC
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+// Wire Interfaces
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (32 + 4)
+#define PIN_WIRE_SCL (32 + 2)
+
+/*
+ Internal, PCB PAD interrupt PIN. Currently not used. (Not built in my device)
+*/
+// #define PIN_IMU_INT (0 + 16) // Interrupt from the IMU, macro name correct?!
+
+// External serial flash ZD25WQ32CEIGR
+// QSPI Pins
+#define PIN_QSPI_SCK (0 + 4)
+#define PIN_QSPI_CS (0 + 12)
+#define PIN_QSPI_IO0 (0 + 6)  // MOSI if using two bit interface
+#define PIN_QSPI_IO1 (0 + 8)  // MISO if using two bit interface
+#define PIN_QSPI_IO2 (32 + 9) // WP if using two bit interface (i.e. not used)
+#define PIN_QSPI_IO3 (0 + 26) // HOLD if using two bit interface (i.e. not used)
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES ZD25WQ32CEIGR
+#define EXTERNAL_FLASH_USE_QSPI
+
+// Lora radio
+
+#define USE_SX1262
+// #define USE_SX1268 // currently only available with XS1262.
+#define SX126X_CS (0 + 11)
+#define SX126X_DIO1 (32 + 8)
+#define SX126X_DIO2 (0 + 5)
+#define SX126X_BUSY (0 + 14)
+#define SX126X_RESET (0 + 7)
+#define SX126X_RXEN (32 + 1)
+#define SX126X_TXEN (0 + 27)
+// #define TCXO_OPTIONAL
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// eink display pins
+#define VEXT_ENABLE (32 + 12)
+#define VEXT_ON_VALUE LOW
+#define PIN_EINK_CS (0 + 22)
+#define PIN_EINK_BUSY (0 + 3)
+#define PIN_EINK_DC (0 + 21)
+#define PIN_EINK_RES (0 + 28)
+#define PIN_EINK_SCLK (0 + 19)
+#define PIN_EINK_MOSI (0 + 20)
+
+// Controls power 3V3 for all peripherals (eink + GPS + LoRa + Sensor)
+#define PIN_POWER_EN (0 + 30) // 3V3 POWER Enable
+
+#define PIN_SPI1_MISO (-1) // The display does not use MISO.
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+
+// GPS pins
+// #define GPS_DEBUG
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define HAS_GPS 1
+// #define PIN_GPS_REINIT (32 + 5) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
+
+#define PIN_GPS_STANDBY (32 + 10) // An output to wake GPS, low means allow sleep, high means force wake
+// Seems to be missing on this new board
+#define PIN_GPS_PPS (0 + 29) // Pulse per second input from the GPS
+#define GPS_TX_PIN (32 + 15) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 13) // This is for bits going TOWARDS the GPS
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// SPI Interfaces
+#define SPI_INTERFACES_COUNT 2
+
+// For LORA, SPI 0
+#define PIN_SPI_MISO (0 + 17)
+#define PIN_SPI_MOSI (0 + 15)
+#define PIN_SPI_SCK (0 + 13)
+
+// Battery
+// The battery sense is hooked to pin A0 (2)
+// it is defined in the analogue pin section of this file
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (2.0F)
+
+// #define NO_EXT_GPIO 1
+// PINs back side
+// Batt & solar connector left up corner
+/*
+-------------------------------
+| VDDH, VBAT, 0.23, SCL , 1.06 |
+| GND , SDA , 0.09, 0.10, 0.25 |
+-------------------------------
+                        --------
+                        | VDDH |
+                        | GND  |
+                        | 1.13 | - Wake Up/standby
+                        | 1.15 | - PPS
+                        | 0.29 | - TX
+                        | 1.10 | - RX
+                        | 1.11 | - EN
+                        --------
+-------------------------------
+| 3V3 , GND , 0.16, 1.03, G_WU |  0.16 internal solder pad interrupt PIN,
+| G_EN, G_RX, G_TX, GND , PPS  |
+-------------------------------
+*/
+
+// To debug via the segger JLINK console rather than the CDC-ACM serial device
+// #define USE_SEGGER
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 5
+build = 6