Merge branch 'develop' into pioarduino

* Implement setting TX_GAIN_LORA for portduino

* use std::size instead of sizeof

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.14"
+      "version": "3.13"
     }
   },
   "customizations": {

.vscode/extensions.json

@@ -1,10 +1,9 @@
 {
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+        "pioarduino.pioarduino-ide"
     ],
     "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
+        "ms-vscode.cpptools-extension-pack",
+        "platformio.platformio-ide"
     ]
 }

bin/build-esp32.sh

@@ -33,7 +33,7 @@ echo "Copying ESP32 update bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
 echo "Copying Filesystem for ESP32 targets"
-cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin || true
 cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 

bin/platformio-custom.py

@@ -301,7 +301,8 @@ if not should_skip_manifest and platform.name == "espressif32":
     target_lfs = env.DataToBin(
         join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
     )
-    mtjson_deps.append(target_lfs)
+    # prepend the littlefs target to the mtjson dependencies
+    # mtjson_deps.insert(0, target_lfs)
 
 if should_skip_manifest:
     def skip_manifest(source, target, env):

boards/CDEBYTE_EoRa-S3.json

@@ -7,7 +7,7 @@
     "extra_flags": [
       "-D CDEBYTE_EORA_S3",
       "-D ARDUINO_USB_CDC_ON_BOOT=1",
-      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_USB_MODE=1",
       "-D ARDUINO_RUNNING_CORE=1",
       "-D ARDUINO_EVENT_RUNNING_CORE=1",
       "-D BOARD_HAS_PSRAM"

boards/bpi_picow_esp32_s3.json

@@ -6,7 +6,7 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1",
       "-DBOARD_HAS_PSRAM"

boards/hackaday-communicator.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_e213.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_e290.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_vision_master_t190.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_wireless_tracker.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DHELTEC_WIRELESS_TRACKER",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/heltec_wireless_tracker_v2.json

@@ -7,7 +7,7 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/seeed-xiao-s3.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

boards/station-g2.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],

boards/t-beam-1w.json

@@ -9,7 +9,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_1W",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/t-deck.json

@@ -8,7 +8,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/tbeam-s3-core.json

@@ -8,7 +8,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/tlora-t3s3-v1.json

@@ -7,7 +7,7 @@
     "extra_flags": [
       "-DLILYGO_T3S3_V1",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1",
       "-DBOARD_HAS_PSRAM"

boards/unphone.json

@@ -10,7 +10,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DUNPHONE_SPIN=9",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

default_16MB.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x640000,
+app1,     app,  ota_1,   0x650000,0x640000,
+spiffs,   data, spiffs,  0xc90000,0x360000,
+coredump, data, coredump,0xFF0000,0x10000,

default_8MB.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x330000,
+app1,     app,  ota_1,   0x340000,0x330000,
+spiffs,   data, spiffs,  0x670000,0x180000,
+coredump, data, coredump,0x7F0000,0x10000,

extra_scripts/esp32_extra.py

@@ -70,17 +70,6 @@ def esp32_create_combined_bin(source, target, env):
 
 env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
 
-esp32_kind = env.GetProjectOption("custom_esp32_kind")
-if esp32_kind == "esp32":
-    # Free up some IRAM by removing auxiliary SPI flash chip drivers.
-    # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
-    env.Append(
-        LINKFLAGS=[
-            "-Wl,--wrap=esp_flash_chip_gd",
-            "-Wl,--wrap=esp_flash_chip_issi",
-            "-Wl,--wrap=esp_flash_chip_winbond",
-        ]
-    )
-else:
-    # For newer ESP32 targets, using newlib nano works better.
-    env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+# Enable Newlib Nano formatting to save space
+# ...but allow printf float support (compromise)
+env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

platformio.ini

@@ -2,7 +2,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = tbeam
+default_envs = heltec-v3
 
 extra_configs =
 	variants/*/*.ini

src/DebugConfiguration.h

@@ -151,9 +151,8 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 #if HAS_WIFI

src/Power.cpp

@@ -20,6 +20,13 @@
 #include "main.h"
 #include "meshUtils.h"
 #include "sleep.h"
+#ifdef ARCH_ESP32
+// #include <driver/adc.h>
+#include <esp_adc/adc_cali.h>
+#include <esp_adc/adc_cali_scheme.h>
+#include <esp_adc/adc_oneshot.h>
+#include <esp_err.h>
+#endif
 
 #if defined(ARCH_PORTDUINO)
 #include "api/WiFiServerAPI.h"
@@ -38,9 +45,8 @@
 #include <WiFi.h>
 #endif
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 #endif
@@ -52,21 +58,86 @@
 #if defined(BATTERY_PIN) && defined(ARCH_ESP32)
 
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1 is default
-static const adc1_channel_t adc_channel = ADC_CHANNEL;
+static const adc_channel_t adc_channel = ADC_CHANNEL;
 static const adc_unit_t unit = ADC_UNIT_1;
-#else // ADC2
-static const adc2_channel_t adc_channel = ADC_CHANNEL;
+#else  // ADC2
+static const adc_channel_t adc_channel = ADC_CHANNEL;
 static const adc_unit_t unit = ADC_UNIT_2;
-RTC_NOINIT_ATTR uint64_t RTC_reg_b;
-
 #endif // BAT_MEASURE_ADC_UNIT
 
-esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
+static adc_oneshot_unit_handle_t adc_handle = nullptr;
+static adc_cali_handle_t adc_cali_handle = nullptr;
+static bool adc_calibrated = false;
 #ifndef ADC_ATTENUATION
 static const adc_atten_t atten = ADC_ATTEN_DB_12;
 #else
 static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
+#ifdef ADC_BITWIDTH
+static const adc_bitwidth_t adc_width = ADC_BITWIDTH;
+#else
+static const adc_bitwidth_t adc_width = ADC_BITWIDTH_DEFAULT;
+#endif
+
+static int adcBitWidthToBits(adc_bitwidth_t width)
+{
+    switch (width) {
+    case ADC_BITWIDTH_9:
+        return 9;
+    case ADC_BITWIDTH_10:
+        return 10;
+    case ADC_BITWIDTH_11:
+        return 11;
+    case ADC_BITWIDTH_12:
+        return 12;
+#ifdef ADC_BITWIDTH_13
+    case ADC_BITWIDTH_13:
+        return 13;
+#endif
+    default:
+        return 12;
+    }
+}
+
+static bool initAdcCalibration()
+{
+#if ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED
+    adc_cali_curve_fitting_config_t cali_config = {
+        .unit_id = unit,
+        .atten = atten,
+        .bitwidth = adc_width,
+    };
+    esp_err_t ret = adc_cali_create_scheme_curve_fitting(&cali_config, &adc_cali_handle);
+    if (ret == ESP_OK) {
+        LOG_INFO("ADC calibration: curve fitting enabled");
+        return true;
+    }
+    if (ret != ESP_ERR_NOT_SUPPORTED) {
+        LOG_WARN("ADC calibration: curve fitting failed: %s", esp_err_to_name(ret));
+    }
+#endif
+
+#if ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED
+    adc_cali_line_fitting_config_t cali_config = {
+        .unit_id = unit,
+        .atten = atten,
+        .bitwidth = adc_width,
+        .default_vref = DEFAULT_VREF,
+    };
+    esp_err_t ret = adc_cali_create_scheme_line_fitting(&cali_config, &adc_cali_handle);
+    if (ret == ESP_OK) {
+        LOG_INFO("ADC calibration: line fitting enabled");
+        return true;
+    }
+    if (ret != ESP_ERR_NOT_SUPPORTED) {
+        LOG_WARN("ADC calibration: line fitting failed: %s", esp_err_to_name(ret));
+    }
+#endif
+
+    LOG_INFO("ADC calibration not supported; using approximate scaling");
+    return false;
+}
+
 #endif // BATTERY_PIN && ARCH_ESP32
 
 #ifdef EXT_CHRG_DETECT
@@ -329,8 +400,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
             battery_adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
-            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
-            scaled *= operativeAdcMultiplier;
+            int voltage_mv = 0;
+            if (adc_calibrated && adc_cali_handle) {
+                if (adc_cali_raw_to_voltage(adc_cali_handle, raw, &voltage_mv) != ESP_OK) {
+                    LOG_WARN("ADC calibration read failed; using raw value");
+                    voltage_mv = 0;
+                }
+            }
+            if (voltage_mv == 0) {
+                // Fallback approximate conversion without calibration
+                const int bits = adcBitWidthToBits(adc_width);
+                const float max_code = powf(2.0f, bits) - 1.0f;
+                voltage_mv = (int)((raw / max_code) * DEFAULT_VREF);
+            }
+            scaled = voltage_mv * operativeAdcMultiplier;
 #else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
@@ -368,51 +451,22 @@ class AnalogBatteryLevel : public HasBatteryLevel
         uint32_t raw = 0;
         uint8_t raw_c = 0; // raw reading counter
 
-#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+        if (!adc_handle) {
+            LOG_ERROR("ADC oneshot handle not initialized");
+            return 0;
+        }
+
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-            int val_ = adc1_get_raw(adc_channel);
-            if (val_ >= 0) { // save only valid readings
-                raw += val_;
+            int val = 0;
+            esp_err_t err = adc_oneshot_read(adc_handle, adc_channel, &val);
+            if (err == ESP_OK) {
+                raw += val;
                 raw_c++;
-            }
-            // delayMicroseconds(100);
-        }
-#else                            // ADC2
-#ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
-        // ADC2 wifi bug workaround not required, breaks compile
-        // On ESP32S3, ADC2 can take turns with Wifi (?)
-
-        int32_t adc_buf;
-        esp_err_t read_result;
-
-        // Multiple samples
-        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-            adc_buf = 0;
-            read_result = -1;
-
-            read_result = adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
-            if (read_result == ESP_OK) {
-                raw += adc_buf;
-                raw_c++; // Count valid samples
             } else {
-                LOG_DEBUG("An attempt to sample ADC2 failed");
+                LOG_DEBUG("ADC read failed: %s", esp_err_to_name(err));
             }
         }
 
-#else  // Other ESP32
-        int32_t adc_buf = 0;
-        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-            // ADC2 wifi bug workaround, see
-            // https://github.com/espressif/arduino-esp32/issues/102
-            WRITE_PERI_REG(SENS_SAR_READ_CTRL2_REG, RTC_reg_b);
-            SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
-            adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
-            raw += adc_buf;
-            raw_c++;
-        }
-#endif // BAT_MEASURE_ADC_UNIT
-
-#endif // End BAT_MEASURE_ADC_UNIT
         return (raw / (raw_c < 1 ? 1 : raw_c));
     }
 #endif
@@ -626,40 +680,30 @@ bool Power::analogInit()
 #endif
 
 #ifdef ARCH_ESP32 // ESP32 needs special analog stuff
+    adc_oneshot_unit_init_cfg_t init_config = {
+        .unit_id = unit,
+    };
 
-#ifndef ADC_WIDTH // max resolution by default
-    static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
-#else
-    static const adc_bits_width_t width = ADC_WIDTH;
-#endif
-#ifndef BAT_MEASURE_ADC_UNIT // ADC1
-    adc1_config_width(width);
-    adc1_config_channel_atten(adc_channel, atten);
-#else // ADC2
-    adc2_config_channel_atten(adc_channel, atten);
-#ifndef CONFIG_IDF_TARGET_ESP32S3
-    // ADC2 wifi bug workaround
-    // Not required with ESP32S3, breaks compile
-    RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
-#endif
-#endif
-    // calibrate ADC
-    esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
-    // show ADC characterization base
-    if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        LOG_INFO("ADC config based on Two Point values stored in eFuse");
-    } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        LOG_INFO("ADC config based on reference voltage stored in eFuse");
+    if (!adc_handle) {
+        esp_err_t err = adc_oneshot_new_unit(&init_config, &adc_handle);
+        if (err != ESP_OK) {
+            LOG_ERROR("ADC oneshot init failed: %s", esp_err_to_name(err));
+            return false;
+        }
     }
-#ifdef CONFIG_IDF_TARGET_ESP32S3
-    // ESP32S3
-    else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse");
-    }
-#endif
-    else {
-        LOG_INFO("ADC config based on default reference voltage");
+
+    adc_oneshot_chan_cfg_t config = {
+        .atten = atten,
+        .bitwidth = adc_width,
+    };
+
+    esp_err_t err = adc_oneshot_config_channel(adc_handle, adc_channel, &config);
+    if (err != ESP_OK) {
+        LOG_ERROR("ADC channel config failed: %s", esp_err_to_name(err));
+        return false;
     }
+
+    adc_calibrated = initAdcCalibration();
 #endif // ARCH_ESP32
 
 #ifdef ARCH_NRF52

src/configuration.h

@@ -155,6 +155,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 // Default system gain to 0 if not defined
+#ifndef NUM_PA_POINTS
+#define NUM_PA_POINTS 1
+#endif
+
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif

src/graphics/niche/InkHUD/MessageStore.cpp

@@ -50,12 +50,14 @@ void InkHUD::MessageStore::saveToFlash()
     // For each message
     for (uint8_t i = 0; i < messages.size() && i < MAX_MESSAGES_SAVED; i++) {
         Message &m = messages.at(i);
-        f.write((uint8_t *)&m.timestamp, sizeof(m.timestamp));                    // Write timestamp. 4 bytes
-        f.write((uint8_t *)&m.sender, sizeof(m.sender));                          // Write sender NodeId. 4 Bytes
-        f.write((uint8_t *)&m.channelIndex, sizeof(m.channelIndex));              // Write channel index. 1 Byte
-        f.write((uint8_t *)m.text.c_str(), min(MAX_MESSAGE_SIZE, m.text.size())); // Write message text. Variable length
-        f.write('\0');                                                            // Append null term
-        LOG_DEBUG("Wrote message %u, length %u, text \"%s\"", (uint32_t)i, min(MAX_MESSAGE_SIZE, m.text.size()), m.text.c_str());
+        f.write((uint8_t *)&m.timestamp, sizeof(m.timestamp));       // Write timestamp. 4 bytes
+        f.write((uint8_t *)&m.sender, sizeof(m.sender));             // Write sender NodeId. 4 Bytes
+        f.write((uint8_t *)&m.channelIndex, sizeof(m.channelIndex)); // Write channel index. 1 Byte
+        f.write((uint8_t *)m.text.c_str(),
+                std::min<size_t>(MAX_MESSAGE_SIZE, m.text.size())); // Write message text. Variable length
+        f.write('\0');                                              // Append null term
+        LOG_DEBUG("Wrote message %u, length %u, text \"%s\"", (uint32_t)i, std::min<size_t>(MAX_MESSAGE_SIZE, m.text.size()),
+                  m.text.c_str());
     }
 
     // Release firmware's SPI lock, because SafeFile::close needs it

src/input/ExpressLRSFiveWay.h

@@ -13,6 +13,8 @@
 
 #ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
 
+// REVISIT esp_adc_cal.h
+// "legacy adc calibration driver is deprecated, please migrate to use esp_adc/adc_cali.h and esp_adc/adc_cali_scheme.h"
 #include <esp_adc_cal.h>
 #include <soc/adc_channel.h>
 

src/input/TLoraPagerKeyboard.cpp

@@ -68,7 +68,7 @@ TLoraPagerKeyboard::TLoraPagerKeyboard()
     : TCA8418KeyboardBase(_TCA8418_ROWS, _TCA8418_COLS), modifierFlag(0), last_modifier_time(0), last_key(-1), next_key(-1),
       last_tap(0L), char_idx(0), tap_interval(0)
 {
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
     ledcAttach(KB_BL_PIN, LEDC_BACKLIGHT_FREQ, LEDC_BACKLIGHT_BIT_WIDTH);
 #else
     ledcSetup(LEDC_BACKLIGHT_CHANNEL, LEDC_BACKLIGHT_FREQ, LEDC_BACKLIGHT_BIT_WIDTH);
@@ -108,7 +108,7 @@ void TLoraPagerKeyboard::setBacklight(bool on)
     uint32_t _brightness = 0;
     if (on)
         _brightness = brightness;
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
     ledcWrite(KB_BL_PIN, _brightness);
 #else
     ledcWrite(LEDC_BACKLIGHT_CHANNEL, _brightness);

src/mesh/RadioInterface.cpp

@@ -666,18 +666,24 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
         power = maxPower;
     }
 
-#ifndef NUM_PA_POINTS
-    if (TX_GAIN_LORA > 0 && !devicestate.owner.is_licensed) {
-        LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, TX_GAIN_LORA);
-        power -= TX_GAIN_LORA;
-    }
+#ifdef ARCH_PORTDUINO
+    size_t num_pa_points = portduino_config.num_pa_points;
+    const uint16_t *tx_gain = portduino_config.tx_gain_lora;
 #else
-    if (!devicestate.owner.is_licensed) {
+    size_t num_pa_points = NUM_PA_POINTS;
+    const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+#endif
+
+    if (num_pa_points == 1) {
+        if (tx_gain[0] > 0 && !devicestate.owner.is_licensed) {
+            LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[0]);
+            power -= tx_gain[0];
+        }
+    } else if (!devicestate.owner.is_licensed) {
         // we have an array of PA gain values.  Find the highest power setting that works.
-        const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
-        for (int radio_dbm = 0; radio_dbm < NUM_PA_POINTS; radio_dbm++) {
+        for (int radio_dbm = 0; radio_dbm < num_pa_points; radio_dbm++) {
             if (((radio_dbm + tx_gain[radio_dbm]) > power) ||
-                ((radio_dbm == (NUM_PA_POINTS - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
+                ((radio_dbm == (num_pa_points - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
                 // we've exceeded the power limit, or hit the max we can do
                 LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[radio_dbm]);
                 power -= tx_gain[radio_dbm];
@@ -685,7 +691,7 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
             }
         }
     }
-#endif
+
     if (power > loraMaxPower) // Clamp power to maximum defined level
         power = loraMaxPower;
 

src/mesh/api/WiFiServerAPI.h

@@ -3,9 +3,8 @@
 #include "ServerAPI.h"
 #include <WiFi.h>
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 /**

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,7 +77,9 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
+    /* TODO: REPLACE */
+    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -323,8 +325,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -361,7 +361,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2279
+#define meshtastic_BackupPreferences_size        2362
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
+    /* StatusMessage Config */
+    bool has_statusmessage;
+    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -96,9 +99,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -124,6 +127,7 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
+#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -161,7 +165,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -177,6 +182,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
+#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -186,9 +192,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        675
+#define meshtastic_LocalModuleConfig_size        758
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/http/WebServer.cpp

@@ -12,9 +12,8 @@
 #include <WebServer.h>
 #include <WiFi.h>
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 #ifdef ARCH_ESP32

src/mesh/udp/UdpMulticastHandler.h

@@ -12,9 +12,8 @@
 
 #include <AsyncUDP.h>
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 #define UDP_MULTICAST_DEFAUL_PORT 4403 // Default port for UDP multicast is same as TCP api server

src/mesh/wifi/WiFiAPClient.cpp

@@ -10,9 +10,8 @@
 #include "target_specific.h"
 #include <WiFi.h>
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 #include <WiFiUdp.h>

src/mesh/wifi/WiFiAPClient.h

@@ -9,9 +9,8 @@
 #include <WiFi.h>
 #endif
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 
 extern bool needReconnect;

src/modules/esp32/PaxcounterModule.cpp

@@ -90,8 +90,8 @@ int32_t PaxcounterModule::runOnce()
             configuration.blecounter = 1;
             configuration.blescantime = 0; // infinite
             configuration.wificounter = 1;
-            configuration.wifi_channel_map = WIFI_CHANNEL_ALL;
-            configuration.wifi_channel_switch_interval = 50;
+            // configuration.wifi_channel_map = WIFI_CHANNEL_ALL;
+            // configuration.wifi_channel_switch_interval = 50;
             configuration.wifi_rssi_threshold = Default::getConfiguredOrDefault(moduleConfig.paxcounter.wifi_threshold, -80);
             configuration.ble_rssi_threshold = Default::getConfiguredOrDefault(moduleConfig.paxcounter.ble_threshold, -80);
             libpax_update_config(&configuration);

src/mqtt/MQTT.cpp

@@ -19,9 +19,8 @@
 #include "mesh/wifi/WiFiAPClient.h"
 #include <WiFi.h>
 #endif
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
+#if HAS_ETHERNET && defined(ARCH_ESP32)
+#include <ETH.h>
 #endif // HAS_ETHERNET
 #include "Default.h"
 #if !defined(ARCH_NRF52) || NRF52_USE_JSON

src/platform/esp32/align-text.handler_execute-4.ld

@@ -0,0 +1,11 @@
+/* Arduino fix: catch esp_event's orphaned .text.handler_execute section and align to 4 bytes */
+SECTIONS
+{
+  .text.handler_execute :
+  {
+    KEEP(*(.text.handler_execute))
+    KEEP(*(.text.handler_execute.*))
+    . = ALIGN(4);
+  }
+}
+INSERT AFTER .flash.text;

src/platform/esp32/main-esp32.cpp

@@ -160,9 +160,10 @@ void esp32Setup()
 // #define APP_WATCHDOG_SECS 45
 #define APP_WATCHDOG_SECS 90
 
-#ifdef CONFIG_IDF_TARGET_ESP32C6
+#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
     esp_task_wdt_config_t *wdt_config = (esp_task_wdt_config_t *)malloc(sizeof(esp_task_wdt_config_t));
     wdt_config->timeout_ms = APP_WATCHDOG_SECS * 1000;
+    wdt_config->idle_core_mask = 1 << 1;
     wdt_config->trigger_panic = true;
     res = esp_task_wdt_init(wdt_config);
     assert(res == ESP_OK);
@@ -250,8 +251,10 @@ void cpuDeepSleep(uint32_t msecToWake)
 #endif // #end ESP32S3_WAKE_TYPE
 #endif
 
+#if SOC_PM_SUPPORT_RTC_PERIPH_PD
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+#endif
 
     esp_sleep_enable_timer_wakeup(msecToWake * 1000ULL); // call expects usecs
     esp_deep_sleep_start();                              // TBD mA sleep current (battery)

src/platform/portduino/PortduinoGlue.cpp

@@ -649,6 +649,19 @@ bool loadConfig(const char *configPath)
             if (yamlConfig["Lora"]["RF95_MAX_POWER"])
                 portduino_config.rf95_max_power = yamlConfig["Lora"]["RF95_MAX_POWER"].as<int>(20);
 
+            if (yamlConfig["Lora"]["TX_GAIN_LORA"]) {
+                YAML::Node tx_gain_node = yamlConfig["Lora"]["TX_GAIN_LORA"];
+                if (tx_gain_node.IsSequence() && tx_gain_node.size() != 0) {
+                    portduino_config.num_pa_points = min(tx_gain_node.size(), std::size(portduino_config.tx_gain_lora));
+                    for (int i = 0; i < portduino_config.num_pa_points; i++) {
+                        portduino_config.tx_gain_lora[i] = tx_gain_node[i].as<int>();
+                    }
+                } else {
+                    portduino_config.num_pa_points = 1;
+                    portduino_config.tx_gain_lora[0] = tx_gain_node.as<int>(0);
+                }
+            }
+
             if (portduino_config.lora_module != use_autoconf && portduino_config.lora_module != use_simradio &&
                 !portduino_config.force_simradio) {
                 portduino_config.dio2_as_rf_switch = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as<bool>(false);

src/platform/portduino/PortduinoGlue.h

@@ -91,6 +91,8 @@ extern struct portduino_config_struct {
     int lora_usb_pid = 0x5512;
     int lora_usb_vid = 0x1A86;
     int spiSpeed = 2000000;
+    int num_pa_points = 1; // default to 1 point, with 0 gain
+    uint16_t tx_gain_lora[22] = {0};
     pinMapping lora_cs_pin = {"Lora", "CS"};
     pinMapping lora_irq_pin = {"Lora", "IRQ"};
     pinMapping lora_busy_pin = {"Lora", "Busy"};
@@ -231,6 +233,17 @@ extern struct portduino_config_struct {
             out << YAML::Key << "LR1120_MAX_POWER" << YAML::Value << lr1120_max_power;
         if (rf95_max_power != 20)
             out << YAML::Key << "RF95_MAX_POWER" << YAML::Value << rf95_max_power;
+
+        if (num_pa_points > 1) {
+            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << YAML::Flow << YAML::BeginSeq;
+            for (int i = 0; i < num_pa_points; i++) {
+                out << YAML::Value << tx_gain_lora[i];
+            }
+            out << YAML::EndSeq;
+        } else if (tx_gain_lora[0] != 0) {
+            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << tx_gain_lora[0];
+        }
+
         out << YAML::Key << "DIO2_AS_RF_SWITCH" << YAML::Value << dio2_as_rf_switch;
         if (dio3_tcxo_voltage != 0)
             out << YAML::Key << "DIO3_TCXO_VOLTAGE" << YAML::Value << YAML::Precision(3) << (float)dio3_tcxo_voltage / 1000;

src/power.h

@@ -4,8 +4,10 @@
 #include "configuration.h"
 
 #ifdef ARCH_ESP32
-// "legacy adc calibration driver is deprecated, please migrate to use esp_adc/adc_cali.h and esp_adc/adc_cali_scheme.h
-#include <esp_adc_cal.h>
+// #include <driver/adc.h>
+#include <esp_adc/adc_cali.h>
+#include <esp_adc/adc_cali_scheme.h>
+#include <esp_adc/adc_oneshot.h>
 #include <soc/adc_channel.h>
 #endif
 
@@ -35,11 +37,6 @@
 #define NUM_CELLS 1
 #endif
 
-#ifdef BAT_MEASURE_ADC_UNIT
-extern RTC_NOINIT_ATTR uint64_t RTC_reg_b;
-#include "soc/sens_reg.h" // needed for adc pin reset
-#endif
-
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 #include "modules/Telemetry/Sensor/nullSensor.h"
 #if __has_include(<Adafruit_INA219.h>)

src/sleep.cpp

@@ -17,8 +17,6 @@
 #include "target_specific.h"
 
 #ifdef ARCH_ESP32
-// "esp_pm_config_esp32_t is deprecated, please include esp_pm.h and use esp_pm_config_t instead"
-#include "esp32/pm.h"
 #include "esp_pm.h"
 #if HAS_WIFI
 #include "mesh/wifi/WiFiAPClient.h"
@@ -389,8 +387,10 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
 
     // NOTE! ESP docs say we must disable bluetooth and wifi before light sleep
 
+#if SOC_PM_SUPPORT_RTC_PERIPH_PD
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
+#endif
 
 #if defined(BUTTON_PIN) && defined(BUTTON_NEED_PULLUP)
     gpio_pullup_en((gpio_num_t)BUTTON_PIN);
@@ -512,11 +512,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
  */
 void enableModemSleep()
 {
-#if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(3, 0, 0)
     static esp_pm_config_t esp32_config; // filled with zeros because bss
-#else
-    static esp_pm_config_esp32_t esp32_config; // filled with zeros because bss
-#endif
 #if CONFIG_IDF_TARGET_ESP32S3
     esp32_config.max_freq_mhz = CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ;
 #elif CONFIG_IDF_TARGET_ESP32S2

variants/esp32/chatter2/platformio.ini

@@ -9,5 +9,5 @@ build_flags =
   
 lib_deps =
   ${esp32_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/a44af6bb1d2063b3b00fdb5dffb366b565d55ab3.zip

variants/esp32/chatter2/variant.h

@@ -72,7 +72,7 @@
 // Battery
 
 #define BATTERY_PIN 34 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_ATTENUATION                                                                                                          \
     ADC_ATTEN_DB_2_5       // 2_5-> 100mv-1250mv, 11-> 150mv-3100mv for ESP32
                            // ESP32-S2/C3/S3 are different

variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.h

@@ -30,7 +30,7 @@
 // Battery sense
 #define BATTERY_PIN 35
 #define ADC_MULTIPLIER 2.01 // 100k + 100k, and add 1% tolerance
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
 
 // SPI

variants/esp32/diy/dr-dev/variant.h

@@ -3,7 +3,7 @@
 #define I2C_SDA 4
 #define I2C_SCL 5
 #define BATTERY_PIN 34
-#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 
 // GPS
 #undef GPS_RX_PIN

variants/esp32/diy/hydra/variant.h

@@ -11,7 +11,7 @@
 // Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
 // If 39 is not being used for a button, it is suggested to remove the #define.
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
 #define EXT_PWR_DETECT 4    // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
 #define EXT_NOTIFY_OUT 12   // Overridden default pin to use for Ext Notify Module (#975).

variants/esp32/diy/v1/variant.h

@@ -11,7 +11,7 @@
 
 #define BUTTON_PIN 39  // The middle button GPIO on the T-Beam
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
 #define EXT_PWR_DETECT 4    // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
 #define EXT_NOTIFY_OUT 12   // Overridden default pin to use for Ext Notify Module (#975).

variants/esp32/esp32-common.ini

@@ -4,8 +4,9 @@ extends = arduino_base
 custom_esp32_kind =
 custom_mtjson_part =
 platform =
-  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.12.0
+  # TODO renovate
+  https://github.com/pioarduino/platform-espressif32/releases/download/55.03.36/platform-espressif32.zip
+  ; https://github.com/pioarduino/platform-espressif32.git#develop
 
 extra_scripts =
   ${env.extra_scripts}
@@ -24,10 +25,10 @@ board_build.filesystem = littlefs
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
 # See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
 # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_unflags = -fno-lto
+build_unflags =
+  -fno-lto
 build_flags =
   ${arduino_base.build_flags}
-  -flto
   -Wall
   -Wextra
   -Isrc/platform/esp32
@@ -36,11 +37,6 @@ build_flags =
   -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial
-  -DCONFIG_BT_NIMBLE_ENABLED
-  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DSERIAL_HAS_ON_RECEIVE
@@ -54,24 +50,45 @@ build_flags =
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
-  ${networking_extra.lib_deps}
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # TODO renovate
+  https://github.com/jackjansen/esp32_idf5_https_server/archive/v1.1.1.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  h2zero/NimBLE-Arduino@1.4.3
+  # TODO renovate
+  https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
 
 lib_ignore = 
   segger_rtt
   ESP32 BLE Arduino
+  ; Ignore builtin NimBLE libs
+  BLE
+  BluetoothSerial
+  SimpleBLE
+  WiFiProv
+  ArduinoOTA
+  ; Ignore pioarduino esp32 libs we don't use
+  ESP_I2S
+  ESP_NOW
+  ESP_SR
+  Insights
+  Matter
+  OpenThread
+  RainMaker
+  ;SPIFFS
+  USB
+  ;NetworkClientSecure
+  Zigbee
+  Micro-RTSP
+  ; testing below
+  mqtt
+  esp-mqtt
 
 ; leave this commented out to avoid breaking Windows
 ;upload_port = /dev/ttyUSB0
@@ -84,3 +101,224 @@ lib_ignore =
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
 board_build.partitions = partition-table.csv
+
+custom_component_remove =
+  espressif/esp_hosted
+  espressif/esp_wifi_remote
+  espressif/esp_modem
+  espressif/esp-dsp
+  espressif/esp32-camera
+  espressif/libsodium
+  espressif/esp-modbus
+  espressif/qrcode
+  espressif/esp_insights
+  espressif/esp_diag_data_store
+  espressif/esp_diagnostics
+  espressif/esp_rainmaker
+  espressif/rmaker_common
+  espressif/network_provisioning
+  chmorgan/esp-libhelix-mp3
+  espressif/esp-tflite-micro
+  espressif/esp-sr
+  espressif/esp_matter
+  espressif/esp-zboss-lib
+  espressif/esp-zigbee-lib
+  espressif/mqtt
+
+custom_sdkconfig =
+  ; CONFIG_LOG_DEFAULT_LEVEL=4
+  ; CONFIG_LOG_MAXIMUM_LEVEL=4
+  ; CONFIG_BT_NIMBLE_CPP_LOG_LEVEL=1
+  CONFIG_LOG_COLORS=y
+  CONFIG_ARDUHAL_LOG_COLORS=y
+  CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
+  CONFIG_IDF_EXPERIMENTAL_FEATURES=y
+  ;
+  ; Compiler options
+  ;
+  CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=n
+  CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y
+  CONFIG_COMPILER_CXX_EXCEPTIONS=n
+  CONFIG_COMPILER_STACK_CHECK_MODE_NORM=n
+  CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
+  CONFIG_COMPILER_DISABLE_GCC12_WARNINGS=y
+  CONFIG_COMPILER_DISABLE_GCC13_WARNINGS=y
+  CONFIG_COMPILER_DISABLE_GCC14_WARNINGS=y
+  CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING=n
+  CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
+  CONFIG_ESP_GDBSTUB_ENABLED=n
+  CONFIG_ESP_TASK_WDT_INIT=n
+  CONFIG_NEWLIB_NANO_FORMAT=y
+  ; LIBC_NEWLIB_NANO_FORMAT is enabled via 'esp32_extra.py' to allow float support
+  CONFIG_ESP_COREDUMP_ENABLE=n
+  CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=n
+  CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
+  CONFIG_ESP32_ENABLE_COREDUMP=n
+  CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=n
+  CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=n
+  CONFIG_FREERTOS_USE_TRACE_FACILITY=n
+  CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH=y
+  CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH=y
+  CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH=y
+  CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM=y
+  CONFIG_ESP_WIFI_IRAM_OPT=n
+  CONFIG_ESP32_WIFI_RX_IRAM_OPT=n
+  CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=n
+  CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=n
+  CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=n
+  CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=n
+  CONFIG_UNITY_ENABLE_FLOAT=n
+  CONFIG_UNITY_ENABLE_DOUBLE=n
+  CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=n
+  CONFIG_SUPPORT_TERMIOS=n
+  CONFIG_VFS_SUPPORT_TERMIOS=n
+  CONFIG_VFS_SUPPORT_SELECT=n
+  CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=n
+  CONFIG_WS_TRANSPORT=n
+  CONFIG_PPP_SUPPORT=n
+  CONFIG_NETWORK_PROV_NETWORK_TYPE_WIFI=n
+  ; CONFIG_LWIP_DHCPS=n
+  CONFIG_LWIP_PPP_SUPPORT=n
+  CONFIG_LWIP_IP_FORWARD=n
+  CONFIG_LWIP_IPV4_NAPT=n
+  ;
+  ; MBEDTLS
+  ;
+  CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=8192
+  CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=n
+  CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN=y
+  ; Switch to custom CA bundle (for Meshtastic MQTT/etc) in the future
+  ; https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/kconfig-reference.html#certificate-bundle-configuration
+  ; CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE=y
+  ; CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE_PATH=""
+  CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=1
+  ; #shame
+  CONFIG_MBEDTLS_ALLOW_WEAK_CERTIFICATE_VERIFICATION=y
+  CONFIG_MBEDTLS_SSL_RENEGOTIATION=n
+  CONFIG_MBEDTLS_SSL_PROTO_DTLS=n
+  CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=n
+  CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=n
+  CONFIG_MBEDTLS_PKCS7_C=n
+  CONFIG_MBEDTLS_CAMELLIA_C=n
+  CONFIG_MBEDTLS_CCM_C=n
+  CONFIG_MBEDTLS_CMAC_C=n
+  CONFIG_MBEDTLS_SHA512_C=n
+  CONFIG_MBEDTLS_X509_CRL_PARSE_C=n
+  CONFIG_MBEDTLS_X509_CSR_PARSE_C=n
+  CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=n
+  CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=n
+  CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=n
+  CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE=n
+  CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=n
+  CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=n
+  CONFIG_MDNS_ENABLE_CONSOLE_CLI=n
+  CONFIG_MDNS_PREDEF_NETIF_AP=n
+  ; CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
+  CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=n
+  CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=n
+  CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=n
+  CONFIG_ESP_WIFI_ENABLE_SAE_H2E=n
+  CONFIG_OPENTHREAD_ENABLED=n
+  CONFIG_ZB_ENABLED=n
+  CONFIG_IEEE802154_ENABLED=n
+  CONFIG_ESP_INSIGHTS_ENABLED=n
+  CONFIG_HTTPD_WS_SUPPORT=n
+  CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=n
+  CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH=n
+  ; using esp-idf5-https_server library instead, for now?
+  CONFIG_ESP_HTTPS_SERVER_ENABLE=n
+  ;
+  ; Builtin ESP-MQTT, we don't use this (yet?)
+  ;
+  CONFIG_MQTT_TRANSPORT_SSL=n
+  CONFIG_MQTT_TRANSPORT_WEBSOCKET=n
+  CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=n
+  CONFIG_MQTT_PROTOCOL_311=n
+  ;
+  ; Ethernet
+  ; Disabled in esp32_common, re-enable on variants that need it
+  ;
+  CONFIG_ETH_ENABLED=n
+  CONFIG_ARDUINO_SELECTIVE_Ethernet=n
+  ;
+  ; Bluetooth
+  ;
+  CONFIG_BLE_MESH=n
+  CONFIG_BT_ENABLED=y
+  CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
+  CONFIG_BT_BLUEDROID_ENABLED=n
+  CONFIG_BT_NIMBLE_ENABLED=y
+  CONFIG_BT_NIMBLE_NVS_PERSIST=y
+  CONFIG_BT_NIMBLE_ROLE_CENTRAL=n
+  CONFIG_BT_NIMBLE_ROLE_OBSERVER=n
+  CONFIG_BT_CONTROLLER_ENABLED=y
+  CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  CONFIG_BT_NIMBLE_MAX_CCCDS=20
+  CONFIG_BT_NIMBLE_MAX_BONDS=6
+  CONFIG_BT_NIMBLE_ENABLE_PERIODIC_SYNC=n
+  CONFIG_BT_NIMBLE_ENABLE_PERIODIC_ADV=n
+  CONFIG_BT_NIMBLE_EXT_SCAN=n
+  CONFIG_BT_NIMBLE_PERIODIC_ADV_SYNC_TRANSFER=n
+  CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY=n
+  CONFIG_BT_NIMBLE_BLUFI_ENABLE=n
+  CONFIG_BT_NIMBLE_PROX_SERVICE=n
+  CONFIG_BT_NIMBLE_ANS_SERVICE=n
+  CONFIG_BT_NIMBLE_CTS_SERVICE=n
+  CONFIG_BT_NIMBLE_HTP_SERVICE=n
+  CONFIG_BT_NIMBLE_IPSS_SERVICE=n
+  CONFIG_BT_NIMBLE_TPS_SERVICE=n
+  CONFIG_BT_NIMBLE_IAS_SERVICE=n
+  CONFIG_BT_NIMBLE_LLS_SERVICE=n
+  CONFIG_BT_NIMBLE_SPS_SERVICE=n
+  CONFIG_BT_NIMBLE_HR_SERVICE=n
+  CONFIG_BT_NIMBLE_HID_SERVICE=n
+  CONFIG_BT_NIMBLE_BAS_SERVICE=n
+  CONFIG_BT_NIMBLE_DIS_SERVICE=n
+  ;
+  ; Arduino selective compilation
+  ; Disable unused Arduino libraries to save space
+  ;
+  CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
+  CONFIG_ARDUINO_SELECTIVE_SPI=y
+  CONFIG_ARDUINO_SELECTIVE_Wire=y
+  CONFIG_ARDUINO_SELECTIVE_ESP_SR=n
+  CONFIG_ARDUINO_SELECTIVE_EEPROM=y
+  CONFIG_ARDUINO_SELECTIVE_Preferences=y
+  CONFIG_ARDUINO_SELECTIVE_Ticker=y
+  CONFIG_ARDUINO_SELECTIVE_Update=y
+  CONFIG_ARDUINO_SELECTIVE_Zigbee=n
+  CONFIG_ARDUINO_SELECTIVE_FS=y
+  CONFIG_ARDUINO_SELECTIVE_SD=y
+  CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
+  CONFIG_ARDUINO_SELECTIVE_SPIFFS=y
+  CONFIG_ARDUINO_SELECTIVE_FFat=n
+  CONFIG_ARDUINO_SELECTIVE_LittleFS=y
+  CONFIG_ARDUINO_SELECTIVE_Network=y
+  ; CONFIG_ARDUINO_SELECTIVE_Ethernet=n
+  CONFIG_ARDUINO_SELECTIVE_PPP=n
+  CONFIG_ARDUINO_SELECTIVE_Hash=y
+  CONFIG_ARDUINO_SELECTIVE_ArduinoOTA=n
+  CONFIG_ARDUINO_SELECTIVE_AsyncUDP=y
+  CONFIG_ARDUINO_SELECTIVE_DNSServer=n
+  CONFIG_ARDUINO_SELECTIVE_ESPmDNS=y
+  CONFIG_ARDUINO_SELECTIVE_HTTPClient=n
+  CONFIG_ARDUINO_SELECTIVE_Matter=n
+  CONFIG_ARDUINO_SELECTIVE_NetBIOS=n
+  CONFIG_ARDUINO_SELECTIVE_WebServer=n
+  CONFIG_ARDUINO_SELECTIVE_WiFi=y
+  CONFIG_ARDUINO_SELECTIVE_NetworkClientSecure=y
+  CONFIG_ARDUINO_SELECTIVE_WiFiProv=n
+  CONFIG_ARDUINO_SELECTIVE_BLE=n
+  CONFIG_ARDUINO_SELECTIVE_BluetoothSerial=n
+  CONFIG_ARDUINO_SELECTIVE_SimpleBLE=n
+  CONFIG_ARDUINO_SELECTIVE_RainMaker=n
+  CONFIG_ARDUINO_SELECTIVE_OpenThread=n
+  CONFIG_ARDUINO_SELECTIVE_Insights=n

variants/esp32/esp32.ini

@@ -6,7 +6,12 @@ custom_esp32_kind = esp32
 
 build_flags =
   ${esp32_common.build_flags}
+  -mtext-section-literals
   -DMESHTASTIC_EXCLUDE_AUDIO=1
+
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+
 ; Override lib_deps to use environmental_extra_no_bsec instead of environmental_extra
 ; BSEC library uses ~3.5KB DRAM which causes overflow on original ESP32 targets
 lib_deps =
@@ -16,13 +21,13 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra_no_bsec.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # TODO renovate
+  https://github.com/jackjansen/esp32_idf5_https_server/archive/v1.1.1.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  h2zero/NimBLE-Arduino@1.4.3
+  # TODO renovate
+  https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto@0.4.0

variants/esp32/heltec_wsl_v2.1/variant.h

@@ -12,7 +12,7 @@
 #define ADC_CTRL 21
 #define ADC_CTRL_ENABLED LOW
 #define BATTERY_PIN 37 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_CHANNEL_1
+#define ADC_CHANNEL ADC_CHANNEL_1
 // ratio of voltage divider = 3.20 (R1=100k, R2=220k)
 #define ADC_MULTIPLIER 3.2
 

variants/esp32/m5stack_core/platformio.ini

@@ -33,5 +33,5 @@ lib_ignore =
   m5stack-core
 lib_deps = 
   ${esp32_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/a44af6bb1d2063b3b00fdb5dffb366b565d55ab3.zip

variants/esp32/m5stack_coreink/variant.h

@@ -93,7 +93,7 @@
 #define PIN_EINK_MOSI 23 // EPD_MOSI
 
 #define BATTERY_PIN 35
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 // https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/m5paper/M5_PAPER_SCH.pdf
 // https://github.com/m5stack/M5Core-Ink/blob/master/examples/Basics/FactoryTest/FactoryTest.ino#L58
 //  VBAT

variants/esp32/nano-g1-explorer/variant.h

@@ -33,7 +33,7 @@
 #endif
 
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
 #define ADC_MULTIPLIER 2
 

variants/esp32/radiomaster_900_bandit/platformio.ini

@@ -7,7 +7,7 @@ build_flags =
   -DVTABLES_IN_FLASH=1
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -DHAS_STK8XXX=1
-  -O2
+  ; -O2
   -I variants/esp32/radiomaster_900_bandit
 board_build.f_cpu = 240000000L
 upload_protocol = esptool

variants/esp32/rak11200/variant.h

@@ -49,7 +49,7 @@ static const uint8_t SCK = 33;
 
 #define PIN_VBAT WB_A0
 #define BATTERY_PIN PIN_VBAT
-#define ADC_CHANNEL ADC1_GPIO36_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 
 // https://docs.rakwireless.com/Product-Categories/WisBlock/RAK13300/
 

variants/esp32/station-g1/variant.h

@@ -32,7 +32,7 @@
 #endif
 
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define BATTERY_SENSE_SAMPLES 30 // Set the number of samples, It has an effect of increasing sensitivity.
 #define ADC_MULTIPLIER 6.45
 #define CELL_TYPE_LION // same curve for liion/lipo

variants/esp32/tbeam_v07/variant.h

@@ -6,7 +6,7 @@
 #define BUTTON_PIN 39
 #define BATTERY_PIN 35    // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 
 #define USE_RF95
 #define LORA_DIO0 26 // a No connect on the SX1262 module

variants/esp32/tlora_v1_3/variant.h

@@ -1,5 +1,5 @@
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 
 #define I2C_SDA 21 // I2C pins for this board
 #define I2C_SCL 22

variants/esp32/tlora_v2/variant.h

@@ -1,5 +1,5 @@
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 
 #define I2C_SDA 21 // I2C pins for this board
 #define I2C_SCL 22

variants/esp32/tlora_v2_1_16/variant.h

@@ -1,5 +1,5 @@
 #define BATTERY_PIN 35
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define BATTERY_SENSE_SAMPLES 30
 
 // ratio of voltage divider = 2.0 (R42=100k, R43=100k)

variants/esp32/tlora_v2_1_18/variant.h

@@ -1,7 +1,7 @@
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider = 2.0 (R42=100k, R43=100k)
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 
 #define I2C_SDA 21 // I2C pins for this board
 #define I2C_SCL 22

variants/esp32/trackerd/variant.h

@@ -23,7 +23,7 @@
 #undef BAT_MEASURE_ADC_UNIT
 #define BATTERY_PIN 35      // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 #define ADC_MULTIPLIER 1.34 //  tracked resistance divider is 100k+470k, so it can not fillfull well on esp32 adc
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // lower dB for high resistance voltage divider
 
 #undef GPS_RX_PIN

variants/esp32/wiphone/platformio.ini

@@ -10,8 +10,8 @@ build_flags =
   -I variants/esp32/wiphone
 lib_deps = 
   ${esp32_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/a44af6bb1d2063b3b00fdb5dffb366b565d55ab3.zip
   # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
   sparkfun/SX1509 IO Expander@3.0.6
   # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102

variants/esp32c3/esp32c3.ini

@@ -5,6 +5,19 @@ custom_esp32_kind = esp32c3
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
 
+build_flags =
+  ${esp32_common.build_flags}
+  ; Linker script to align text.handler_execute section to 4 bytes
+  -Wl,-Tsrc/platform/esp32/align-text.handler_execute-4.ld
+
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+  ; ESP32c3 doesn't support SD_MMC
+  CONFIG_ARDUINO_SELECTIVE_SD_MMC=n
+  CONFIG_BT_NIMBLE_EXT_ADV=y
+  CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
+  CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+
 lib_deps =
   ${esp32_common.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master

variants/esp32c6/esp32c6.ini

@@ -1,48 +1,34 @@
 [esp32c6_base]
 extends = esp32_common
-platform =
-  # Do not renovate until we have switched to pioarduino tagged builds
-  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+custom_esp32_kind = esp32c6
 
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+build_flags =
+  ${esp32_common.build_flags}
+  ; Linker script to align text.handler_execute section to 4 bytes
+  -Wl,-Tsrc/platform/esp32/align-text.handler_execute-4.ld
+  ; Exclude Paxcounter, it uses 'esp_vhci_host_send_packet' whch is not available on ESP32-C6
+  ; https://github.com/espressif/arduino-esp32/issues/11716
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
 
 build_src_filter = 
-  ${esp32_common.build_src_filter} -<mesh/http>
+ ${esp32_common.build_src_filter}
 
 monitor_speed = 460800
 monitor_filters = esp32_c3_exception_decoder
 
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+  ; ESP32c6 doesn't support SD_MMC
+  CONFIG_ARDUINO_SELECTIVE_SD_MMC=n
+  CONFIG_BT_NIMBLE_EXT_ADV=y
+  CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
+  CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+
 lib_ignore =
   ${esp32_common.lib_ignore}
-  NonBlockingRTTTL
-  NimBLE-Arduino
   libpax
-  
+
+lib_deps =
+  ${esp32_common.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -17,30 +17,16 @@ board_build.partitions = default_16MB.csv
 ;Normal method
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
-build_unflags =
-  -D HAS_BLUETOOTH
-  -D MESHTASTIC_EXCLUDE_BLUETOOTH
-  -D HAS_WIFI
 lib_deps =
   ${esp32c6_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
-  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
   ${esp32c6_base.build_flags}
   -D M5STACK_UNITC6L
   -I variants/esp32c6/m5stack_unitc6l
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MODE=1
-  -D HAS_BLUETOOTH=1
-	-DCONFIG_BT_NIMBLE_EXT_ADV=1
-	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
-  -D NIMBLE_TWO
 monitor_speed=115200
-lib_ignore =
-  NonBlockingRTTTL
-  libpax
 build_src_filter = 
  ${esp32c6_base.build_src_filter} +<../variants/esp32c6/m5stack_unitc6l>

variants/esp32c6/tlora_c6/platformio.ini

@@ -8,3 +8,10 @@ build_flags =
   -I variants/esp32c6/tlora_c6
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MODE=1
+  ; Disable audio.
+  ; ESP32-C6 with 4MB flash is TIGHT on space.
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+
+lib_ignore =
+  ${esp32c6_base.lib_ignore}
+  ESP32 Codec2

variants/esp32p4/esp32p4.ini

@@ -0,0 +1,43 @@
+[esp32p4_base]
+extends = esp32_common
+custom_esp32_kind = esp32p4
+
+build_flags =
+  ${esp32_common.build_flags}
+  -DHAS_BLUETOOTH=0
+  -DHAS_WIFI=0
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1 ; BME680Sensor
+
+build_src_filter = 
+ ${esp32_common.build_src_filter} -<libpax/> -<nimble/> -<platform/stm32wl> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+  CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
+  CONFIG_BT_ENABLED=n
+  CONFIG_BT_NIMBLE_ENABLED=n
+  CONFIG_BT_NIMBLE_EXT_ADV=n
+  CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y ; remove for production version
+  ;CONFIG_ESP_SYSTEM_PANIC_GDBSTUB=y ; for target debugging
+
+lib_ignore =
+  ${esp32_common.lib_ignore}
+  libpax
+  esp8266-oled-ssd1306
+  NimBLE-Arduino
+  bsec2
+  esp32_idf5_https_server
+  esp_driver_cam
+  esp_http_server
+  esp_lcd
+
+lib_deps =
+  ${esp32_common.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip

variants/esp32s2/esp32s2.ini

@@ -12,13 +12,18 @@ build_flags =
   -DHAS_BLUETOOTH=0
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -mtext-section-literals
 
-lib_deps =
-  ${esp32_common.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
 
 lib_ignore = 
   ${esp32_common.lib_ignore}
   NimBLE-Arduino
   libpax
+
+lib_deps =
+  ${esp32_common.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  

variants/esp32s3/CDEBYTE_EoRa-S3/variant.h

@@ -18,7 +18,7 @@
 
 // Battery voltage monitoring - TODO: test, currently untested, copied from T3S3 variant
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_MULTIPLIER                                                                                                           \
     2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried over from
          // the T3S3, test to see if the undervoltage correction is needed.

variants/esp32s3/ELECROW-ThinkNode-M2/variant.h

@@ -43,8 +43,8 @@
 // Battery
 // #define BATTERY_PIN 2
 #define BATTERY_PIN 17
-// #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
-#define ADC_CHANNEL ADC2_GPIO17_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_1
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define BATTERY_SENSE_RESOLUTION_BITS 12
 #define BATTERY_SENSE_RESOLUTION 4096.0
 #undef AREF_VOLTAGE

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -12,7 +12,7 @@
 // USB_CHECK
 #define EXT_PWR_DETECT 12
 #define BATTERY_PIN 8
-#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7
 
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
 

variants/esp32s3/crowpanel-esp32s3-5-epaper/variant.h

@@ -17,7 +17,7 @@
 // #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to
 //  measure battery voltage ratio of voltage divider = 2.0 (assumption)
 // #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-// #define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_0
 
 #define I2C_SDA SDA // 21
 #define I2C_SCL SCL // 15

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -14,9 +14,6 @@ lib_deps =
   zinggjm/GxEPD2@1.6.5
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
   ${esp32s3_base.build_flags}
   -D PRIVATE_HW
@@ -28,3 +25,4 @@ build_flags =
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
   -DARDUINO_USB_MODE=0
+  -DARDUINO_USB_CDC_ON_BOOT=1

variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini

@@ -12,13 +12,9 @@ lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
   ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_oled
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
-  -DARDUINO_USB_MODE=0

variants/esp32s3/diy/t-energy-s3_e22/platformio.ini

@@ -6,13 +6,10 @@ board_build.partitions = default_16MB.csv
 board_level = extra
 board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
 board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -D ARDUINO_USB_MODE=1
 build_flags =
   ${esp32s3_base.build_flags}
   -D EBYTE_ESP32_S3
   -D BOARD_HAS_PSRAM
-  -D ARDUINO_USB_MODE=0
+  -D ARDUINO_USB_MODE=1
   -D ARDUINO_USB_CDC_ON_BOOT=1
   -I variants/esp32s3/diy/t-energy-s3_e22

variants/esp32s3/diy/t-energy-s3_e22/variant.h

@@ -4,7 +4,7 @@
 // Battery
 #define BATTERY_PIN 3
 #define ADC_MULTIPLIER 2.0
-#define ADC_CHANNEL ADC1_GPIO3_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_2
 
 // Button on NanoVHF PCB
 #define BUTTON_PIN 39

variants/esp32s3/dreamcatcher/platformio.ini

@@ -13,7 +13,7 @@ build_flags =
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
   earlephilhower/ESP8266SAM@1.1.0
 

variants/esp32s3/elecrow_panel/pins_arduino.h

@@ -15,9 +15,9 @@ static const uint8_t MOSI = 48;
 static const uint8_t MISO = 47;
 static const uint8_t SCK = 41;
 
-static const uint8_t SPI_MOSI = 6;
-static const uint8_t SPI_SCK = 5;
-static const uint8_t SPI_MISO = 4;
+// static const uint8_t SPI_MOSI = 6;
+// static const uint8_t SPI_SCK = 5;
+// static const uint8_t SPI_MISO = 4;
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;

variants/esp32s3/elecrow_panel/platformio.ini

@@ -38,16 +38,21 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D USE_PACKET_API
   -D HAS_SDCARD
   -D SD_SPI_FREQUENCY=75000000
+  -D SPI_MISO=4
+  -D SPI_MOSI=6
+  -D SPI_SCK=5
 
 lib_deps = ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
   earlephilhower/ESP8266SAM@1.1.0
   # renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
   hideakitai/TCA9534@0.1.1
-  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/a44af6bb1d2063b3b00fdb5dffb366b565d55ab3.zip
+  ; REVISIT note: v1.2.7 breaks the elecrow 7" display functionality
 
 [crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
 extends = crowpanel_base

variants/esp32s3/esp32-s3-pico/variant.h

@@ -22,8 +22,8 @@
 // https://www.waveshare.com/img/devkit/ESP32-S3-Pico/ESP32-S3-Pico-details-inter-1.jpg
 // digram is incorrect labeled as battery pin is getting readings on GPIO7_CH1?
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
-// #define ADC_CHANNEL ADC1_GPIO6_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
+// #define ADC_CHANNEL ADC_CHANNEL_5
 //   ratio of voltage divider = 3.0 (R17=200k, R18=100k)
 #define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
 

variants/esp32s3/esp32s3.ini

@@ -4,6 +4,16 @@ custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
 
+build_flags =
+  ${esp32_common.build_flags}
+  -mtext-section-literals
+
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+  CONFIG_BT_NIMBLE_EXT_ADV=y
+  CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
+  CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+
 lib_deps =
   ${esp32_common.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master

variants/esp32s3/hackaday-communicator/variant.h

@@ -22,7 +22,7 @@
 // #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 //  ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
 // #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_3
 
 // keyboard
 #define I2C_SDA 47 // I2C pins for this board

variants/esp32s3/heltec_capsule_sensor_v3/variant.h

@@ -7,7 +7,7 @@
 #define BUTTON_ACTIVE_PULLUP false
 
 #define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER (4.9 * 1.045)
 #define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1

variants/esp32s3/heltec_sensor_hub/variant.h

@@ -5,7 +5,7 @@
 #define BUTTON_ACTIVE_PULLUP false
 
 #define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER (4.9 * 1.045)
 #define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1

variants/esp32s3/heltec_v3/variant.h

@@ -16,7 +16,7 @@
 #define ADC_CTRL 37
 #define ADC_CTRL_ENABLED LOW
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045
 

variants/esp32s3/heltec_v4/platformio.ini

@@ -125,8 +125,8 @@ build_flags =
 
 lib_deps = ${heltec_v4_base.lib_deps}
   ; ${device-ui_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/a44af6bb1d2063b3b00fdb5dffb366b565d55ab3.zip
   # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
   https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
   ; TODO revert to official device-ui (when merged)

variants/esp32s3/heltec_v4/variant.h

@@ -4,7 +4,7 @@
 #define ADC_CTRL 37
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045
 

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -15,6 +15,7 @@ board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags}
+  -DBOARD_HAS_PSRAM
   -Ivariants/esp32s3/heltec_vision_master_e213 
   -DHELTEC_VISION_MASTER_E213
   -DUSE_EINK
@@ -43,6 +44,7 @@ build_src_filter =
 build_flags =  
   ${esp32s3_base.build_flags}
   ${inkhud.build_flags}
+  -D BOARD_HAS_PSRAM
   -I variants/esp32s3/heltec_vision_master_e213
   -D HELTEC_VISION_MASTER_E213
 lib_deps =

variants/esp32s3/heltec_vision_master_e213/variant.h

@@ -28,7 +28,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5
 

variants/esp32s3/heltec_vision_master_e290/variant.h

@@ -27,7 +27,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5
 

variants/esp32s3/heltec_vision_master_t190/variant.h

@@ -45,7 +45,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 6
-#define ADC_CHANNEL ADC1_GPIO6_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_5
 #define ADC_MULTIPLIER 4.9 * 1.03        // Voltage divider is roughly 1:1
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
 

variants/esp32s3/heltec_wireless_paper/variant.h

@@ -24,7 +24,7 @@
 #define VEXT_ON_VALUE LOW
 #define ADC_CTRL 19
 #define BATTERY_PIN 20
-#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_9
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high

variants/esp32s3/heltec_wireless_paper_v1/variant.h

@@ -25,7 +25,7 @@
 #define VEXT_ON_VALUE LOW
 #define ADC_CTRL 19
 #define BATTERY_PIN 20
-#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_9
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high