Update Screen.cpp to repair a merge issue

* Remove the up/down shortcut to launch canned messages

* Enabled MQTT and WEBSERVER by default (#8679)

Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

---------

Signed-off-by: kur1k0 <zhuzirun@m5stack.com>
Co-authored-by: Riker <zhuzirun@m5stack.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.clusterfuzzlite/Dockerfile

@@ -20,7 +20,7 @@ ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
         cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
         libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config libsqlite3-dev && \
+        libusb-1.0-0-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && \
     pip install --no-cache-dir -U \
         platformio==6.1.16 \

.clusterfuzzlite/build.sh

@@ -51,7 +51,7 @@ for f in .clusterfuzzlite/*_fuzzer.cpp; do
 	fuzzer=$(basename "$f" .cpp)
 	cp -f "$f" src/fuzzer.cpp
 	pio run -vvv --environment "$PIO_ENV"
-	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/meshtasticd"
+	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
 	cp "$program" "$OUT/$fuzzer"
 
 	# Copy shared libraries used by the fuzzer.

.github/actionlint.yaml

@@ -2,5 +2,4 @@
 self-hosted-runner:
   # Labels of self-hosted runner in array of strings.
   labels:
-    - arctastic
     - test-runner

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v5
+      uses: actions/cache@v4
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,9 +100,9 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v6
+      uses: actions/upload-artifact@v5
       with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true
         path: |
           ${{ inputs.artifact-paths }}

.github/copilot-instructions.md

@@ -1,314 +0,0 @@
-# Meshtastic Firmware - Copilot Instructions
-
-This document provides context and guidelines for AI assistants working with the Meshtastic firmware codebase.
-
-## Project Overview
-
-Meshtastic is an open-source LoRa mesh networking project for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware enables text messaging, location sharing, and telemetry over a decentralized mesh network.
-
-### Supported Hardware Platforms
-
-- **ESP32** (ESP32, ESP32-S3, ESP32-C3) - Most common platform
-- **nRF52** (nRF52840, nRF52833) - Low power Nordic chips
-- **RP2040/RP2350** - Raspberry Pi Pico variants
-- **STM32WL** - STM32 with integrated LoRa
-- **Linux/Portduino** - Native Linux builds (Raspberry Pi, etc.)
-
-### Supported Radio Chips
-
-- **SX1262/SX1268** - Sub-GHz LoRa (868/915 MHz regions)
-- **SX1280** - 2.4 GHz LoRa
-- **LR1110/LR1120/LR1121** - Wideband radios (sub-GHz and 2.4 GHz capable, but not simultaneously)
-- **RF95** - Legacy RFM95 modules
-- **LLCC68** - Low-cost LoRa
-
-### MQTT Integration
-
-MQTT provides a bridge between Meshtastic mesh networks and the internet, enabling nodes with network connectivity to share messages with remote meshes or external services.
-
-#### Key Components
-
-- **`src/mqtt/MQTT.cpp`** - Main MQTT client singleton, handles connection and message routing
-- **`src/mqtt/ServiceEnvelope.cpp`** - Protobuf wrapper for mesh packets sent over MQTT
-- **`moduleConfig.mqtt`** - MQTT module configuration
-
-#### MQTT Topic Structure
-
-Messages are published/subscribed using a hierarchical topic format:
-
-```
-{root}/{channel_id}/{gateway_id}
-```
-
-- `root` - Configurable prefix (default: `msh`)
-- `channel_id` - Channel name/identifier
-- `gateway_id` - Node ID of the publishing gateway
-
-#### Configuration Defaults (from `Default.h`)
-
-```cpp
-#define default_mqtt_address "mqtt.meshtastic.org"
-#define default_mqtt_username "meshdev"
-#define default_mqtt_password "large4cats"
-#define default_mqtt_root "msh"
-#define default_mqtt_encryption_enabled true
-#define default_mqtt_tls_enabled false
-```
-
-#### Key Concepts
-
-- **Uplink** - Mesh packets sent TO the MQTT broker (controlled by `uplink_enabled` per channel)
-- **Downlink** - MQTT messages received and injected INTO the mesh (controlled by `downlink_enabled` per channel)
-- **Encryption** - When `encryption_enabled` is true, only encrypted packets are sent; plaintext JSON is disabled
-- **ServiceEnvelope** - Protobuf wrapper containing packet + channel_id + gateway_id for routing
-- **JSON Support** - Optional JSON encoding for integration with external systems (disabled on nRF52 by default)
-
-#### PKI Messages
-
-PKI (Public Key Infrastructure) messages have special handling:
-
-- Accepted on a special "PKI" channel
-- Allow encrypted DMs between nodes that discovered each other on downlink-enabled channels
-
-## Project Structure
-
-```
-firmware/
-├── src/                    # Main source code
-│   ├── main.cpp           # Application entry point
-│   ├── mesh/              # Core mesh networking
-│   │   ├── NodeDB.*       # Node database management
-│   │   ├── Router.*       # Packet routing
-│   │   ├── Channels.*     # Channel management
-│   │   ├── *Interface.*   # Radio interface implementations
-│   │   └── generated/     # Protobuf generated code
-│   ├── modules/           # Feature modules (Position, Telemetry, etc.)
-│   ├── gps/               # GPS handling
-│   ├── graphics/          # Display drivers and UI
-│   ├── platform/          # Platform-specific code
-│   ├── input/             # Input device handling
-│   └── concurrency/       # Threading utilities
-├── variants/              # Hardware variant definitions
-│   ├── esp32/            # ESP32 variants
-│   ├── esp32s3/          # ESP32-S3 variants
-│   ├── nrf52/            # nRF52 variants
-│   └── rp2xxx/           # RP2040/RP2350 variants
-├── protobufs/            # Protocol buffer definitions
-├── boards/               # Custom PlatformIO board definitions
-└── bin/                  # Build and utility scripts
-```
-
-## Coding Conventions
-
-### General Style
-
-- Follow existing code style - run `trunk fmt` before commits
-- Prefer `LOG_DEBUG`, `LOG_INFO`, `LOG_WARN`, `LOG_ERROR` for logging
-- Use `assert()` for invariants that should never fail
-
-### Naming Conventions
-
-- Classes: `PascalCase` (e.g., `PositionModule`, `NodeDB`)
-- Functions/Methods: `camelCase` (e.g., `sendOurPosition`, `getNodeNum`)
-- Constants/Defines: `UPPER_SNAKE_CASE` (e.g., `MAX_INTERVAL`, `ONE_DAY`)
-- Member variables: `camelCase` (e.g., `lastGpsSend`, `nodeDB`)
-- Config defines: `USERPREFS_*` for user-configurable options
-
-### Key Patterns
-
-#### Module System
-
-Modules inherit from `MeshModule` or `ProtobufModule<T>` and implement:
-
-- `handleReceivedProtobuf()` - Process incoming packets
-- `allocReply()` - Generate response packets
-- `runOnce()` - Periodic task execution (returns next run interval in ms)
-
-```cpp
-class MyModule : public ProtobufModule<meshtastic_MyMessage>
-{
-  protected:
-    virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_MyMessage *msg) override;
-    virtual int32_t runOnce() override;
-};
-```
-
-#### Configuration Access
-
-- `config.*` - Device configuration (LoRa, position, power, etc.)
-- `moduleConfig.*` - Module-specific configuration
-- `channels.*` - Channel configuration and management
-
-#### Default Values
-
-Use the `Default` class helpers in `src/mesh/Default.h`:
-
-- `Default::getConfiguredOrDefaultMs(configured, default)` - Returns ms, using default if configured is 0
-- `Default::getConfiguredOrMinimumValue(configured, min)` - Enforces minimum values
-- `Default::getConfiguredOrDefaultMsScaled(configured, default, numNodes)` - Scales based on network size
-
-#### Thread Safety
-
-- Use `concurrency::Lock` for mutex protection
-- Radio SPI access uses `SPILock`
-- Prefer `OSThread` for background tasks
-
-### Hardware Variants
-
-Each hardware variant has:
-
-- `variant.h` - Pin definitions and hardware capabilities
-- `platformio.ini` - Build configuration
-- Optional: `pins_arduino.h`, `rfswitch.h`
-
-Key defines in variant.h:
-
-```cpp
-#define USE_SX1262          // Radio chip selection
-#define HAS_GPS 1           // Hardware capabilities
-#define LORA_CS 36          // Pin assignments
-#define SX126X_DIO1 14      // Radio-specific pins
-```
-
-### Protobuf Messages
-
-- Defined in `protobufs/meshtastic/*.proto`
-- Generated code in `src/mesh/generated/`
-- Regenerate with `bin/regen-protos.sh`
-- Message types prefixed with `meshtastic_`
-
-### Conditional Compilation
-
-```cpp
-#if !MESHTASTIC_EXCLUDE_GPS        // Feature exclusion
-#ifdef ARCH_ESP32                   // Architecture-specific
-#if defined(USE_SX1262)            // Radio-specific
-#ifdef HAS_SCREEN                   // Hardware capability
-#if USERPREFS_EVENT_MODE           // User preferences
-```
-
-## Build System
-
-Uses **PlatformIO** with custom scripts:
-
-- `bin/platformio-pre.py` - Pre-build script
-- `bin/platformio-custom.py` - Custom build logic
-
-Build commands:
-
-```bash
-pio run -e tbeam              # Build specific target
-pio run -e tbeam -t upload    # Build and upload
-pio run -e native             # Build native/Linux version
-```
-
-## Common Tasks
-
-### Adding a New Module
-
-1. Create `src/modules/MyModule.cpp` and `.h`
-2. Inherit from appropriate base class
-3. Register in `src/modules/Modules.cpp`
-4. Add protobuf messages if needed in `protobufs/`
-
-### Adding a New Hardware Variant
-
-1. Create directory under `variants/<arch>/<name>/`
-2. Add `variant.h` with pin definitions
-3. Add `platformio.ini` with build config
-4. Reference common configs with `extends`
-
-### Modifying Configuration Defaults
-
-- Check `src/mesh/Default.h` for default value defines
-- Check `src/mesh/NodeDB.cpp` for initialization logic
-- Consider `isDefaultChannel()` checks for public channel restrictions
-
-## Important Considerations
-
-### Traffic Management
-
-The mesh network has limited bandwidth. When modifying broadcast intervals:
-
-- Respect minimum intervals on default/public channels
-- Use `Default::getConfiguredOrMinimumValue()` to enforce minimums
-- Consider `numOnlineNodes` scaling for congestion control
-
-### Power Management
-
-Many devices are battery-powered:
-
-- Use `IF_ROUTER(routerVal, normalVal)` for role-based defaults
-- Check `config.power.is_power_saving` for power-saving modes
-- Implement proper `sleep()` methods in radio interfaces
-
-### Channel Security
-
-- `channels.isDefaultChannel(index)` - Check if using default/public settings
-- Default channels get stricter rate limits to prevent abuse
-- Private channels may have relaxed limits
-
-## GitHub Actions CI/CD
-
-The project uses GitHub Actions extensively for CI/CD. Key workflows are in `.github/workflows/`:
-
-### Core CI Workflows
-
-- **`main_matrix.yml`** - Main CI pipeline, runs on push to `master`/`develop` and PRs
-  - Uses `bin/generate_ci_matrix.py` to dynamically generate build targets
-  - Builds all supported hardware variants
-  - PRs build a subset (`--level pr`) for faster feedback
-
-- **`trunk_check.yml`** - Code quality checks on PRs
-  - Runs Trunk.io for linting and formatting
-  - Must pass before merge
-
-- **`tests.yml`** - End-to-end and hardware tests
-  - Runs daily on schedule
-  - Includes native tests and hardware-in-the-loop testing
-
-- **`test_native.yml`** - Native platform unit tests
-  - Runs `pio test -e native`
-
-### Release Workflows
-
-- **`release_channels.yml`** - Triggered on GitHub release publish
-  - Builds Docker images
-  - Packages for PPA (Ubuntu), OBS (openSUSE), and COPR (Fedora)
-  - Handles Alpha/Beta/Stable release channels
-
-- **`nightly.yml`** - Nightly builds from develop branch
-
-- **`docker_build.yml`** / **`docker_manifest.yml`** - Docker image builds
-
-### Build Matrix Generation
-
-The CI uses `bin/generate_ci_matrix.py` to dynamically select which targets to build:
-
-```bash
-# Generate full build matrix
-./bin/generate_ci_matrix.py all
-
-# Generate PR-level matrix (subset for faster builds)
-./bin/generate_ci_matrix.py all --level pr
-```
-
-Variants can specify their support level in `platformio.ini`:
-
-- `custom_meshtastic_support_level = 1` - Actively supported, built on every PR
-- `custom_meshtastic_support_level = 2` - Supported, built on merge to main branches
-- `board_level = extra` - Extra builds, only on full releases
-
-### Running Workflows Locally
-
-Most workflows can be triggered manually via `workflow_dispatch` for testing.
-
-## Testing
-
-- Unit tests in `test/` directory
-- Run with `pio test -e native`
-- Use `bin/test-simulator.sh` for simulation testing
-
-## Resources
-
-- [Documentation](https://meshtastic.org/docs/)

.github/workflows/build_debian_src.yml

@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -18,10 +18,9 @@ permissions: read-all
 jobs:
   pio-build:
     name: build-${{ inputs.platform }}
-    # Use 'arctastic' self-hosted runner pool when building in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-24.04
     outputs:
-      artifact-id: ${{ steps.upload-firmware.outputs.artifact-id }}
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
       - uses: actions/checkout@v6
         with:
@@ -29,6 +28,23 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
+
       - name: Build ${{ inputs.platform }}
         id: build
         uses: meshtastic/gh-action-firmware@main
@@ -36,101 +52,18 @@ jobs:
           pio_platform: ${{ inputs.platform }}
           pio_env: ${{ inputs.pio_env }}
           pio_target: build
-
-      - name: ESP32 - Download Unified OTA firmware
-        # Currently only esp32 and esp32s3 use the unified ota
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3'
-        id: dl-ota-unified
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/esp32-unified-ota/releases/latest/download/mt-${{ inputs.platform }}-ota.bin
-        working-directory: release
-        run: |
-          curl -L -o "mt-$PIO_PLATFORM-ota.bin" $OTA_URL
-
-      - name: ESP32-C* - Download BLE-Only OTA firmware
-        if: inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        id: dl-ota-ble
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-          OTA_URL: https://github.com/meshtastic/firmware-ota/releases/latest/download/firmware-c3.bin
-        working-directory: release
-        run: |
-          curl -L -o bleota-c3.bin $OTA_URL
-
-      - name: Update manifest with OTA file
-        if: inputs.platform == 'esp32' || inputs.platform == 'esp32s3' || inputs.platform == 'esp32c3' || inputs.platform == 'esp32c6'
-        working-directory: release
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          # Determine OTA filename based on platform
-          if [[ "$PIO_PLATFORM" == "esp32" || "$PIO_PLATFORM" == "esp32s3" ]]; then
-            OTA_FILE="mt-${PIO_PLATFORM}-ota.bin"
-          else
-            OTA_FILE="bleota-c3.bin"
-          fi
-
-          # Check if OTA file exists
-          if [[ ! -f "$OTA_FILE" ]]; then
-            echo "OTA file $OTA_FILE not found, skipping manifest update"
-            exit 0
-          fi
-
-          # Calculate MD5 and size
-          if command -v md5sum &> /dev/null; then
-            OTA_MD5=$(md5sum "$OTA_FILE" | cut -d' ' -f1)
-          else
-            OTA_MD5=$(md5 -q "$OTA_FILE")
-          fi
-          OTA_SIZE=$(stat -f%z "$OTA_FILE" 2>/dev/null || stat -c%s "$OTA_FILE")
-
-          # Find and update manifest file
-          for manifest in firmware-*.mt.json; do
-            if [[ -f "$manifest" ]]; then
-              echo "Updating $manifest with $OTA_FILE (md5: $OTA_MD5, size: $OTA_SIZE)"
-              # Add OTA entry to files array if not already present
-              jq --arg name "$OTA_FILE" --arg md5 "$OTA_MD5" --argjson bytes "$OTA_SIZE" --arg part "app1" \
-                'if .files | map(select(.name == $name)) | length == 0 then .files += [{"name": $name, "md5": $md5, "bytes": $bytes, "part_name": $part}] else . end' \
-                "$manifest" > "${manifest}.tmp" && mv "${manifest}.tmp" "$manifest"
-            fi
-          done
-
-      - name: Job summary
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-        run: |
-          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
-          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```json' >> $GITHUB_STEP_SUMMARY
-          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```' >> $GITHUB_STEP_SUMMARY
-          echo "</details>" >> $GITHUB_STEP_SUMMARY
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
-        id: upload-firmware
+        uses: actions/upload-artifact@v5
+        id: upload
         with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true
           path: |
-            release/*.mt.json
             release/*.bin
             release/*.elf
             release/*.uf2
             release/*.hex
-            release/*.zip
-            release/device-*.sh
-            release/device-*.bat
-
-      - name: Store manifests as an artifact
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifest-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
-          overwrite: true
-          path: |
-            release/*.mt.json
+            release/*-ota.zip

.github/workflows/build_one_target.yml

@@ -98,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -119,7 +119,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -127,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -139,14 +139,14 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/first_time_contributor.yml

@@ -1,47 +0,0 @@
-name: Welcome First-Time Contributor
-
-on:
-  issues:
-    types: opened
-  pull_request_target:
-    types: opened
-
-permissions: {}
-
-jobs:
-  welcome:
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write # Required to post comments and labels on issues
-      pull-requests: write # Required to post comments and labels on PRs
-    steps:
-      - uses: plbstl/first-contribution@v4
-        with:
-          labels: first-contribution
-          issue-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic! :wave:
-
-            Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
-
-            If you have ideas for features, note that we often debate big ideas
-            in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)
-            first. This tracker tends to be for ideas that have community
-            consensus and a clear implementation.
-
-            We're very active [on discord](https://discord.com/invite/meshtastic),
-            especially the \#firmware and \#alphanauts-testing channels. If you'll
-            be around for a while, we'd love to see you there!
-
-            Welcome to the community! :heart:
-
-          pr-opened-msg: |
-            ### @{fc-author}, Welcome to Meshtastic!
-
-            Thanks for opening your first pull request. We really appreciate it.
-
-            We discuss work as a team in discord, please join us in the [#firmware channel](https://discord.com/invite/meshtastic).
-            There's a big backlog of patches at the moment. If you have time,
-            please help us with some code review and testing of [other PRs](https://github.com/meshtastic/firmware/pulls)!
-
-            Welcome to the team :smile:

.github/workflows/main_matrix.yml

@@ -8,9 +8,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       - version.properties
@@ -20,9 +18,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -81,21 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v6
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
   build:
     needs: [setup, version]
@@ -177,7 +168,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -186,26 +177,27 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
-            ./firmware-*.mt.json
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
             ./bleota*bin
-            ./mt-*-ota.bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -217,16 +209,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -238,55 +230,12 @@ jobs:
           description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
-  shame:
-    if: github.repository == 'meshtastic/firmware'
-    continue-on-error: true
-    runs-on: ubuntu-latest
-    needs: [build]
-    steps:
-      - uses: actions/checkout@v6
-        if: github.event_name == 'pull_request_target'
-        with:
-          filter: blob:none # means we download all the git history but none of the commit (except ones with checkout like the head)
-          fetch-depth: 0
-      - name: Download the current manifests
-        uses: actions/download-artifact@v7
-        with:
-          path: ./manifests-new/
-          pattern: manifest-*
-          merge-multiple: true
-      - name: Upload combined manifests for later commit and global stats crunching.
-        uses: actions/upload-artifact@v6
-        id: upload-manifest
-        with:
-          name: manifests-${{ github.sha }}
-          overwrite: true
-          path: manifests-new/*.mt.json
-      - name: Find the merge base
-        if: github.event_name == 'pull_request_target'
-        run: echo "MERGE_BASE=$(git merge-base "origin/$base" "$head")" >> $GITHUB_ENV
-        env:
-          base: ${{ github.base_ref }}
-          head: ${{ github.sha }}
-      # Currently broken (for-loop through EVERY artifact -- rate limiting)
-      # - name: Download the old manifests
-      #   if: github.event_name == 'pull_request_target'
-      #   run: gh run download -R "$repo" --name "manifests-$merge_base" --dir manifest-old/
-      #   env:
-      #     GH_TOKEN: ${{ github.token }}
-      #     merge_base: ${{ env.MERGE_BASE }}
-      #     repo: ${{ github.repository }}
-      # - name: Do scan and post comment
-      #   if: github.event_name == 'pull_request_target'
-      #   run: python3 bin/shame.py ${{ github.event.pull_request.number }} manifests-old/ manifests-new/
-
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - setup
       - version
       - gather-artifacts
       - build-debian-src
@@ -294,25 +243,12 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - name: Generate release notes
-        id: release_notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          NOTES=$(./bin/generate_release_notes.py ${{ needs.version.outputs.long }})
-          echo "notes<<EOF" >> $GITHUB_OUTPUT
-          echo "$NOTES" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
@@ -321,17 +257,18 @@ jobs:
           prerelease: true
           name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
           tag_name: v${{ needs.version.outputs.long }}
-          body: ${{ steps.release_notes.outputs.notes }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -347,25 +284,10 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Generate Release manifest
-        run: |
-          jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
-            "version": $ver,
-            "targets": $targets
-          }' > firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v6
-        with:
-          name: manifest-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Add sources to GitHub Release
+      - name: Add Linux sources to GtiHub Release
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{ needs.version.outputs.long }}.json
           gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
           gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
@@ -396,7 +318,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -407,15 +329,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -445,34 +367,18 @@ jobs:
     steps:
       - name: Checkout
         uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - name: Get firmware artifacts
-        uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
-      - name: Get manifest artifact
-        uses: actions/download-artifact@v7
-        with:
-          pattern: manifest-${{ needs.version.outputs.long }}
-          path: ./publish
-
-      - name: Generate release notes
-        run: |
-          chmod +x ./bin/generate_release_notes.py
-          ./bin/generate_release_notes.py ${{ needs.version.outputs.long }} > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -147,7 +147,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -168,7 +168,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -188,16 +188,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -223,6 +223,11 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v6
 
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
@@ -235,14 +240,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -292,7 +297,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -303,15 +308,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -347,7 +352,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -17,7 +17,7 @@ jobs:
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
             const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
             if (!hasRequiredLabel) {
               core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);

.github/workflows/pr_tests.yml

@@ -50,9 +50,9 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Parse test results and create detailed summary

.github/workflows/release_channels.yml

@@ -48,37 +48,6 @@ jobs:
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
 
-  publish-release-notes:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    steps:
-      - name: Get release version
-        id: version
-        run: |
-          # Extract version from tag (e.g., v2.7.15.567b8ea -> 2.7.15.567b8ea)
-          VERSION=${GITHUB_REF#refs/tags/v}
-          echo "version=$VERSION" >> $GITHUB_OUTPUT
-
-      - name: Get release notes
-        run: |
-          mkdir -p ./publish
-          gh release view ${{ github.event.release.tag_name }} --json body --jq '.body' > ./publish/release_notes.md
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Publish release notes to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: firmware-${{ steps.version.outputs.version }}
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: Release notes for ${{ steps.version.outputs.version }}
-          enable_jekyll: true
-
   # Create a PR to bump version when a release is Published
   bump-version:
     if: github.event.action == 'published'
@@ -133,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/stale_bot.yml

@@ -17,10 +17,10 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.1
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
           close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
-          exempt-issue-labels: pinned,3.0,triaged,backlog
-          exempt-pr-labels: pinned,3.0,triaged,backlog
+          exempt-issue-labels: pinned,3.0
+          exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/meshtasticd -s &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,10 +59,10 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -94,9 +94,9 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./testreport.xml
 
@@ -108,10 +108,10 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -137,22 +137,22 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.5.0
+        uses: dorny/test-reporter@v2.3.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
+          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
           merge-multiple: true
 
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}
+          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -22,7 +22,7 @@ jobs:
       - name: Checkout code
         uses: actions/checkout@v6
 
-      # - uses: actions/setup-python@v6
+      # - uses: actions/setup-python@v5
       #   with:
       #     python-version: '3.10'
 

.github/workflows/trunk_format_pr.yml

@@ -0,0 +1,51 @@
+name: Run Trunk Fmt on PR Comment
+
+on:
+  issue_comment:
+    types: [created]
+
+permissions: read-all
+
+jobs:
+  trunk-fmt:
+    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+      pull-requests: write
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v6
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Run Trunk Fmt
+        run: trunk fmt
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Commit and push changes
+        run: |
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
+          git push
+
+      - name: Comment on PR
+        uses: actions/github-script@v8
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          script: |
+            github.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: '`trunk fmt` has been run on this PR.'
+            })

.github/workflows/update_protobufs.yml

@@ -16,7 +16,7 @@ jobs:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' || github.ref == 'refs/heads/develop' }}
+        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.gitignore

@@ -41,12 +41,3 @@ src/mesh/raspihttp/private_key.pem
 
 # Ignore logo (set at build time with platformio-custom.py)
 data/boot/logo.*
-
-# pioarduino platform
-managed_components/*
-arduino-lib-builder*
-dependencies.lock
-idf_component.yml
-CMakeLists.txt
-/sdkconfig.*
-.dummy/*

.trunk/trunk.yaml

@@ -8,25 +8,25 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.497
-    - renovate@42.84.2
-    - prettier@3.8.0
-    - trufflehog@3.92.5
-    - yamllint@1.38.0
-    - bandit@1.9.3
-    - trivy@0.68.2
+    - checkov@3.2.495
+    - renovate@42.27.1
+    - prettier@3.7.3
+    - trufflehog@3.91.1
+    - yamllint@1.37.1
+    - bandit@1.9.2
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.13
+    - ruff@0.14.7
     - isort@7.0.0
-    - markdownlint@0.47.0
-    - oxipng@10.0.0
+    - markdownlint@0.46.0
+    - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.10
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@26.1.0
+    - black@25.11.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

Dockerfile

@@ -14,7 +14,7 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
         curl wget g++ zip git ca-certificates pkg-config \
         libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev libsqlite3-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.7.x            | :white_check_mark: |
-| <= 2.6.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -11,7 +11,7 @@ RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
         libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev sqlite-dev \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -28,7 +28,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.23
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

bin/build-esp32.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,27 +14,33 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying ESP32 bin file"
-cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
 
 echo "Copying ESP32 update bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
 
-echo "Copying Filesystem for ESP32 targets"
-cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
-cp bin/device-install.* $OUTDIR/
-cp bin/device-update.* $OUTDIR/
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+echo "Building Filesystem for ESP32 targets"
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -17,19 +17,15 @@ VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 PIO_ENV=${1:-native}
 
-BUILDDIR=.pio/build/$PIO_ENV
-OUTDIR=release
+OUTDIR=release/
 
-rm -f $OUTDIR/meshtasticd*
+rm -f $OUTDIR/firmware*
 
 mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
-basename=meshtasticd-$1-$VERSION
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
 pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
-
-cp "$BUILDDIR/meshtasticd" "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR/
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,38 +14,40 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
-ota_basename=${basename}-ota
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
+cp $DFUPKG $OUTDIR/$basename-ota.zip
 
-echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
 
-echo "Copying NRF52 UF2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
-cp bin/*.uf2 $OUTDIR/
-
-SRCHEX=$BUILDDIR/$basename.hex
-
-# if WM1110 target, copy the merged.hex
+# if WM1110 target, merge hex with softdevice 7.3.0
 if (echo $1 | grep -q "wio-sdk-wm1110"); then
-	echo "Copying .merged.hex file"
-	SRCHEX=$BUILDDIR/$basename.merged.hex
-	cp $SRCHEX $OUTDIR/
+	echo "Merging with softdevice"
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
 fi
 
 if (echo $1 | grep -q "rak4631"); then
-	echo "Copying .hex file"
-	cp $SRCHEX $OUTDIR/
-fi
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rp2xx0.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,20 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-stm32wl.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,16 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
-
-echo "Copying STM32 bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/config-dist.yaml

@@ -105,8 +105,6 @@ Lora:
 
 GPS:
 #  SerialPath: /dev/ttyS0
-#  ExtraPins:
-#    - 22
 
 ### Specify I2C device, or leave blank for none
 
@@ -186,8 +184,6 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
-#  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:

bin/config.d/lora-hat-rak-6421-pi-hat.yaml

@@ -1,11 +0,0 @@
-Lora:
-
-  ### RAK13300in Slot 1
-  Module: sx1262
-  IRQ: 22 #IO6
-  Reset: 16 # IO4
-  Busy: 24 # IO5
-  # Ant_sw: 13 # IO3 
-  DIO3_TCXO_VOLTAGE: true
-  DIO2_AS_RF_SWITCH: true
-  spidev: spidev0.0

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,14 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  SX126X_MAX_POWER: 22

bin/config.d/lora-usb-umesh-1262.yaml

@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI

bin/config.d/lora-usb-umesh-1268.yaml

@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1268
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI

bin/device-install.bat

@@ -5,14 +5,22 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
+SET "TFT_BUILD=0"
+SET "BIGDB8=0"
+SET "MUIDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
+
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help
@@ -21,7 +29,7 @@ ECHO.
 ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The firmware .factory.bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
@@ -32,12 +40,12 @@ ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.factory.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.factory.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -70,8 +78,8 @@ IF "__!FILENAME!__"=="____" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
     )
-    IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-*.factory.bin file."
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
         GOTO help
     )
     @REM Remove ".\" or "./" file prefix if present.
@@ -85,26 +93,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking for metadata..."
-@REM Derive metadata filename from firmware filename.
-SET "METAFILE=!FILENAME:.factory.bin=!.mt.json"
-IF EXIST !METAFILE! (
-    @REM Print parsed json with powershell
-    CALL :LOG_MESSAGE INFO "Firmware metadata: !METAFILE!"
-    powershell -NoProfile -Command "(Get-Content '!METAFILE!' | ConvertFrom-Json | Out-String).Trim()"
-
-    @REM Save metadata values to variables for later use.
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).mcu"`) DO SET "MCU=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'ota_1' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "OTA_OFFSET=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'spiffs' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "SPIFFS_OFFSET=%%A"
-) ELSE (
-    CALL :LOG_MESSAGE ERROR "No metadata file found: !METAFILE!"
+IF NOT "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
+    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
     GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
 :skip-filename
@@ -114,7 +108,7 @@ IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -152,26 +146,100 @@ IF %BPS_RESET% EQU 1 (
     GOTO eof
 )
 
-@REM Extract PROGNAME from %FILENAME% for later use.
-SET "PROGNAME=!FILENAME:.factory.bin=!"
-CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
-
-IF "__!MCU!__" == "__esp32s3__" (
-    @REM We are working with ESP32-S3
-    SET "OTA_FILENAME=bleota-s3.bin"
-) ELSE IF "__!MCU!__" == "__esp32c3__" (
-    @REM We are working with ESP32-C3
-    SET "OTA_FILENAME=bleota-c3.bin"
+@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
+IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
+    SET "TFT_BUILD=1"
 ) ELSE (
-    @REM Everything else
-    SET "OTA_FILENAME=bleota.bin"
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
 )
+
+FOR %%a IN (%BIGDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
+    )
+)
+:end_loop_bigdb_8mb
+
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
+FOR %%a IN (%BIGDB_16MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
+    )
+)
+:end_loop_bigdb_16mb
+
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
+
+@REM Extract BASENAME from %FILENAME% for later use.
+SET "BASENAME=!FILENAME:firmware-=!"
+CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
+
+@REM Account for S3 and C3 board's different OTA partition.
+FOR %%a IN (%S3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %S3%.
+        SET "OTA_FILENAME=bleota-s3.bin"
+        GOTO :end_loop_s3
+    )
+)
+
+FOR %%a IN (%C3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %C3%.
+        SET "OTA_FILENAME=bleota-c3.bin"
+        GOTO :end_loop_c3
+    )
+)
+
+@REM Everything else
+SET "OTA_FILENAME=bleota.bin"
+:end_loop_s3
+:end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.
-SET "SPIFFS_FILENAME=littlefs-!PROGNAME:firmware-=!.bin"
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
+@REM Default offsets.
+@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+SET "OTA_OFFSET=0x260000"
+SET "SPIFFS_OFFSET=0x300000"
+
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
+    SET "OTA_OFFSET=0x340000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
+    SET "OTA_OFFSET=0x650000"
+    SET "SPIFFS_OFFSET=0xc90000"
+)
+
 CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
 

bin/device-install.sh

@@ -2,15 +2,69 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
+TFT_BUILD=false
 MCU=""
 
 # Constants
 RESET_BAUD=1200
 FIRMWARE_OFFSET=0x00
-# Default littlefs* offset.
-OFFSET=0x300000
-# Default OTA Offset
-OTA_OFFSET=0x260000
+
+# Variant groups
+BIGDB_8MB=(
+    "crowpanel-esp32s3"
+    "heltec_capsule_sensor_v3"
+    "heltec-v3"
+    "heltec-vision-master-e213"
+    "heltec-vision-master-e290"
+    "heltec-vision-master-t190"
+    "heltec-wireless-paper"
+    "heltec-wireless-tracker"
+    "heltec-wsl-v3"
+    "icarus"
+    "seeed-xiao-s3"
+    "tbeam-s3-core"
+    "tracksenger"
+)
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
+)
+BIGDB_16MB=(
+    "dreamcatcher"
+    "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "-v4"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "tlora-pager"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -24,27 +78,6 @@ else
     exit 1
 fi
 
-# Check for jq
-if ! command -v jq >/dev/null 2>&1; then
-    echo "Error: jq not found" >&2
-    echo "Install jq with your package manager." >&2
-    echo "e.g. 'apt install jq', 'dnf install jq', 'brew install jq', etc." >&2
-    exit 1
-fi
-
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_ERASE_FLASH=erase-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_ERASE_FLASH=erase_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 set -e
 
 # Usage info
@@ -56,7 +89,7 @@ Flash image file to device, but first erasing and writing system information.
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware *.factory.bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -96,8 +129,8 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
-    exit 0
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	exit 0
 fi
 
 [ -z "$FILENAME" ] && [ -n "$1" ] && {
@@ -105,43 +138,69 @@ fi
     shift
 }
 
-if [[ $(basename "$FILENAME") != firmware-*.factory.bin ]]; then
-  echo "Filename must be a firmware-*.factory.bin file."
+if [[ "$FILENAME" != firmware-* ]]; then
+  echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Extract PROGNAME from %FILENAME% for later use.
-PROGNAME="${FILENAME/.factory.bin/}"
-# Derive metadata filename from %PROGNAME%.
-METAFILE="${PROGNAME}.mt.json"
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+fi
 
-if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
-    # Display metadata if it exists
-    if [[ -f "$METAFILE" ]]; then
-        echo "Firmware metadata: ${METAFILE}"
-        jq . "$METAFILE"
-        # Extract relevant fields from metadata
-        if [[ $(jq -r '.part' "$METAFILE") != "null" ]]; then
-            OTA_OFFSET=$(jq -r '.part[] | select(.subtype == "ota_1") | .offset' "$METAFILE")
-            SPIFFS_OFFSET=$(jq -r '.part[] | select(.subtype == "spiffs") | .offset' "$METAFILE")
+# Extract BASENAME from %FILENAME% for later use.
+BASENAME="${FILENAME/firmware-/}"
+
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
+    # Default littlefs* offset.
+    OFFSET=0x300000
+
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
+
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
         fi
-        MCU=$(jq -r '.mcu' "$METAFILE")
-    else
-        echo "ERROR: No metadata file found at ${METAFILE}"
-        exit 1
-    fi
+    done
 
-    # Determine OTA filename based on MCU type
-    if [ "$MCU" == "esp32s3" ]; then
-        OTAFILE=bleota-s3.bin
-    elif [ "$MCU" == "esp32c3" ]; then
-        OTAFILE=bleota-c3.bin
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
+
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
     else
-        OTAFILE=bleota.bin
+        OTAFILE=bleota-s3.bin
     fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
-    SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
+    SPIFFSFILE=littlefs-${BASENAME}
 
     if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."
@@ -157,12 +216,12 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD ${ESPTOOL_ERASE_FLASH}
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD ${ESPTOOL_WRITE_FLASH} $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.bat

@@ -30,11 +30,11 @@ ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -78,12 +78,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *.factory.bin* file. !FILENAME!"
+IF "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
     CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are not working with a *.factory.bin* file. !FILENAME!"
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
 :skip-filename

bin/device-update.sh

@@ -20,17 +20,6 @@ else
     exit 1
 fi
 
-# esptool v5 supports commands with dashes and deprecates commands with
-# underscores. Prior versions only support commands with underscores
-if ${ESPTOOL_CMD} | grep --quiet write-flash
-then
-    ESPTOOL_WRITE_FLASH=write-flash
-    ESPTOOL_READ_FLASH_STATUS=read-flash-status
-else
-    ESPTOOL_WRITE_FLASH=write_flash
-    ESPTOOL_READ_FLASH_STATUS=read_flash_status
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -40,7 +29,7 @@ Flash image file to device, leave existing system intact."
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The *.bin file to flash.  Custom to your device type.
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -80,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-    $ESPTOOL_CMD --baud $RESET_BAUD --after no_reset ${ESPTOOL_READ_FLASH_STATUS}
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -89,9 +78,9 @@ fi
     shift
 }
 
-if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD ${ESPTOOL_WRITE_FLASH} $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/exception_decoder.py

@@ -75,7 +75,7 @@ TOOLS = {
 }
 
 BACKTRACE_REGEX = re.compile(
-    r"\b(0x4[0-9a-fA-F]{7,8}):0x[0-9a-fA-F]{8}\b"
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
 )
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
 COUNTER_REGEX = re.compile(
@@ -89,7 +89,7 @@ POINTER_REGEX = re.compile(
 STACK_BEGIN = ">>>stack>>>"
 STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    r"^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
 )
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
@@ -223,7 +223,7 @@ class AddressResolver(object):
             if match is None:
                 if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += "\n  \\-> inlined by: " + line
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
             if match.group("result") == "?? ??:0":

bin/generate_release_notes.py

@@ -1,355 +0,0 @@
-#!/usr/bin/env python3
-"""
-Generate release notes from merged PRs on develop and master branches.
-Categorizes PRs into Enhancements and Bug Fixes/Maintenance sections.
-"""
-
-import subprocess
-import re
-import json
-import sys
-from datetime import datetime
-
-
-def get_last_release_tag():
-    """Get the most recent release tag."""
-    result = subprocess.run(
-        ["git", "describe", "--tags", "--abbrev=0"],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_tag_date(tag):
-    """Get the commit date (ISO 8601) of the tag."""
-    result = subprocess.run(
-        ["git", "show", "-s", "--format=%cI", tag],
-        capture_output=True,
-        text=True,
-        check=True,
-    )
-    return result.stdout.strip()
-
-
-def get_merged_prs_since_tag(tag, branch):
-    """Get all merged PRs since the given tag on the specified branch."""
-    # Get commits since tag on the branch - look for PR numbers in parentheses
-    result = subprocess.run(
-        [
-            "git",
-            "log",
-            f"{tag}..origin/{branch}",
-            "--oneline",
-        ],
-        capture_output=True,
-        text=True,
-    )
-
-    prs = []
-    seen_pr_numbers = set()
-
-    for line in result.stdout.strip().split("\n"):
-        if not line:
-            continue
-
-        # Extract PR number from commit message - format: "Title (#1234)"
-        pr_match = re.search(r"\(#(\d+)\)", line)
-        if pr_match:
-            pr_number = pr_match.group(1)
-            if pr_number not in seen_pr_numbers:
-                seen_pr_numbers.add(pr_number)
-                prs.append(pr_number)
-
-    return prs
-
-
-def get_pr_details(pr_number):
-    """Get PR details from GitHub API via gh CLI."""
-    try:
-        result = subprocess.run(
-            [
-                "gh",
-                "pr",
-                "view",
-                pr_number,
-                "--json",
-                "title,author,labels,url",
-            ],
-            capture_output=True,
-            text=True,
-            check=True,
-        )
-        return json.loads(result.stdout)
-    except subprocess.CalledProcessError:
-        return None
-
-
-def should_exclude_pr(pr_details):
-    """Check if PR should be excluded from release notes."""
-    if not pr_details:
-        return True
-
-    title = pr_details.get("title", "").lower()
-
-    # Exclude trunk update PRs
-    if "upgrade trunk" in title or "update trunk" in title or "trunk update" in title:
-        return True
-
-    # Exclude protobuf update PRs
-    if "update protobufs" in title or "update protobuf" in title:
-        return True
-
-    # Exclude automated version bump PRs
-    if "bump release version" in title or "bump version" in title:
-        return True
-
-    return False
-
-
-def is_dependency_update(pr_details):
-    """Check if PR is a dependency/chore update."""
-    if not pr_details:
-        return False
-
-    title = pr_details.get("title", "").lower()
-    author = pr_details.get("author", {}).get("login", "").lower()
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check for renovate or dependabot authors
-    if "renovate" in author or "dependabot" in author:
-        return True
-
-    # Check for chore(deps) pattern
-    if re.match(r"^chore\(deps\):", title):
-        return True
-
-    # Check for digest update patterns
-    if re.match(r".*digest to [a-f0-9]+", title, re.IGNORECASE):
-        return True
-
-    # Check for dependency-related labels
-    dependency_labels = ["dependencies", "deps", "renovate"]
-    if any(dep in label for label in labels for dep in dependency_labels):
-        return True
-
-    return False
-
-
-def is_enhancement(pr_details):
-    """Determine if PR is an enhancement based on labels and title."""
-    labels = [label.get("name", "").lower() for label in pr_details.get("labels", [])]
-
-    # Check labels first
-    enhancement_labels = ["enhancement", "feature", "feat", "new feature"]
-    for label in labels:
-        if any(enh in label for enh in enhancement_labels):
-            return True
-
-    # Check title prefixes
-    title = pr_details.get("title", "")
-    enhancement_prefixes = ["feat:", "feature:", "add:"]
-    title_lower = title.lower()
-    for prefix in enhancement_prefixes:
-        if title_lower.startswith(prefix) or f" {prefix}" in title_lower:
-            return True
-
-    return False
-
-
-def clean_title(title):
-    """Clean up PR title for release notes."""
-    # Remove common prefixes
-    prefixes_to_remove = [
-        r"^fix:\s*",
-        r"^feat:\s*",
-        r"^feature:\s*",
-        r"^bug:\s*",
-        r"^bugfix:\s*",
-        r"^chore:\s*",
-        r"^chore\([^)]+\):\s*",
-        r"^refactor:\s*",
-        r"^docs:\s*",
-        r"^ci:\s*",
-        r"^build:\s*",
-        r"^perf:\s*",
-        r"^style:\s*",
-        r"^test:\s*",
-    ]
-
-    cleaned = title
-    for prefix in prefixes_to_remove:
-        cleaned = re.sub(prefix, "", cleaned, flags=re.IGNORECASE)
-
-    # Ensure first letter is capitalized
-    if cleaned:
-        cleaned = cleaned[0].upper() + cleaned[1:]
-
-    return cleaned.strip()
-
-
-def format_pr_line(pr_details):
-    """Format a PR as a markdown bullet point."""
-    title = clean_title(pr_details.get("title", "Unknown"))
-    author = pr_details.get("author", {}).get("login", "unknown")
-    url = pr_details.get("url", "")
-
-    return f"- {title} by @{author} in {url}"
-
-
-def get_new_contributors(pr_details_list, tag, repo="meshtastic/firmware"):
-    """Find contributors who made their first merged PR before this release.
-
-    GitHub usernames do not necessarily match git commit authors, so we use the
-    GitHub search API via `gh` to see if the user has any merged PRs before the
-    tag date. This mirrors how GitHub's "Generate release notes" feature works.
-    """
-
-    bot_authors = {"github-actions", "renovate", "dependabot", "app/renovate", "app/github-actions", "app/dependabot"}
-
-    new_contributors = []
-    seen_authors = set()
-
-    try:
-        tag_date = get_tag_date(tag)
-    except subprocess.CalledProcessError:
-        print(f"Warning: Could not determine tag date for {tag}; skipping new contributor detection", file=sys.stderr)
-        return []
-
-    for pr in pr_details_list:
-        author = pr.get("author", {}).get("login", "")
-        if not author or author in seen_authors:
-            continue
-
-        # Skip bots
-        if author.lower() in bot_authors or author.startswith("app/"):
-            continue
-
-        seen_authors.add(author)
-
-        try:
-            # Search for merged PRs by this author created before the tag date
-            search_query = f"is:pr author:{author} repo:{repo} closed:<=\"{tag_date}\""
-            search = subprocess.run(
-                [
-                    "gh",
-                    "search",
-                    "issues",
-                    "--json",
-                    "number,mergedAt,createdAt",
-                    "--state",
-                    "closed",
-                    "--limit",
-                    "200",
-                    search_query,
-                ],
-                capture_output=True,
-                text=True,
-            )
-
-            if search.returncode != 0:
-                # If gh fails, be conservative and skip adding to new contributors
-                print(f"Warning: gh search failed for author {author}: {search.stderr.strip()}", file=sys.stderr)
-                continue
-
-            results = json.loads(search.stdout or "[]")
-            # If any merged PR exists before or on tag date, not a new contributor
-            had_prior_pr = any(item.get("mergedAt") for item in results)
-
-            if not had_prior_pr:
-                new_contributors.append((author, pr.get("url", "")))
-
-        except Exception as e:
-            print(f"Warning: Could not check contributor history for {author}: {e}", file=sys.stderr)
-            continue
-
-    return new_contributors
-
-
-def main():
-    if len(sys.argv) < 2:
-        print("Usage: generate_release_notes.py <new_version>", file=sys.stderr)
-        sys.exit(1)
-
-    new_version = sys.argv[1]
-
-    # Get last release tag
-    try:
-        last_tag = get_last_release_tag()
-    except subprocess.CalledProcessError:
-        print("Error: Could not find last release tag", file=sys.stderr)
-        sys.exit(1)
-
-    # Collect PRs from both branches
-    all_pr_numbers = set()
-
-    for branch in ["develop", "master"]:
-        try:
-            prs = get_merged_prs_since_tag(last_tag, branch)
-            all_pr_numbers.update(prs)
-        except Exception as e:
-            print(f"Warning: Could not get PRs from {branch}: {e}", file=sys.stderr)
-
-    # Get details for all PRs
-    enhancements = []
-    bug_fixes = []
-    dependencies = []
-    all_pr_details = []
-
-    for pr_number in sorted(all_pr_numbers, key=int):
-        details = get_pr_details(pr_number)
-        if details and not should_exclude_pr(details):
-            all_pr_details.append(details)
-            if is_dependency_update(details):
-                dependencies.append(details)
-            elif is_enhancement(details):
-                enhancements.append(details)
-            else:
-                bug_fixes.append(details)
-
-    # Generate release notes
-    output = []
-
-    if enhancements:
-        output.append("## 🚀 Enhancements\n")
-        for pr in enhancements:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if bug_fixes:
-        output.append("## 🐛 Bug fixes and maintenance\n")
-        for pr in bug_fixes:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    if dependencies:
-        output.append("## ⚙️ Dependencies\n")
-        for pr in dependencies:
-            output.append(format_pr_line(pr))
-        output.append("")
-
-    # Find new contributors (GitHub-accurate check using merged PRs before tag date)
-    new_contributors = get_new_contributors(all_pr_details, last_tag)
-    if new_contributors:
-        output.append("## New Contributors\n")
-        for author, url in new_contributors:
-            # Find first PR URL for this contributor
-            first_pr_url = url
-            for pr in all_pr_details:
-                if pr.get("author", {}).get("login") == author:
-                    first_pr_url = pr.get("url", url)
-                    break
-            output.append(f"- @{author} made their first contribution in {first_pr_url}")
-        output.append("")
-
-    # Add full changelog link
-    output.append(
-        f"**Full Changelog**: https://github.com/meshtastic/firmware/compare/{last_tag}...v{new_version}"
-    )
-
-    print("\n".join(output))
-
-
-if __name__ == "__main__":
-    main()

bin/meshtasticd-start.sh

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-INSTANCE=$1
-CONF_DIR="/etc/meshtasticd/config.d"
-VFS_DIR="/var/lib"
-
-# If no instance ID provided, start bare daemon and exit
-echo "no instance ID provided, starting bare meshtasticd service"
-if [ -z "${INSTANCE}" ]; then
-  /usr/bin/meshtasticd
-  exit 0
-fi
-
-# Make VFS dir if it does not exist
-if [ ! -d "${VFS_DIR}/meshtasticd-${INSTANCE}" ]; then
-  echo "vfs for ${INSTANCE} does not exist, creating it."
-  mkdir "${VFS_DIR}/meshtasticd-${INSTANCE}"
-fi
-
-# Abort if config for $INSTANCE does not exist
-if [ ! -f "${CONF_DIR}/config-${INSTANCE}.yaml" ]; then
-  echo "no config for ${INSTANCE} found in ${CONF_DIR}. refusing to start" >&2
-  exit 1
-fi
-
-# Start meshtasticd with instance parameters
-printf "starting meshtasticd-%s..., ${INSTANCE}"
-if /usr/bin/meshtasticd --config="${CONF_DIR}/config-${INSTANCE}.yaml" --fsdir="${VFS_DIR}/meshtasticd-${INSTANCE}"; then
-  echo "ok"
-else
-  echo "failed"
-fi

bin/meshtasticd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Meshtastic %i Daemon
+Description=Meshtastic Native Daemon
 After=network-online.target
 StartLimitInterval=200
 StartLimitBurst=5
@@ -9,7 +9,7 @@ AmbientCapabilities=CAP_NET_BIND_SERVICE
 User=meshtasticd
 Group=meshtasticd
 Type=simple
-ExecStart=/usr/bin/meshtasticd-start.sh %i
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-gdbserver.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-gdbserver --once localhost:2345 .pio/build/native/meshtasticd "$@"
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-install.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
-cp "bin/meshtasticd-start.sh" /usr/bin/meshtasticd-start.sh
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/native-run.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-.pio/build/native/meshtasticd "$@"
+.pio/build/native/program "$@"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,12 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.19" date="2026-01-22">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.19</url>
-    </release>
-    <release version="2.7.18" date="2026-01-02">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
-    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -6,202 +6,94 @@ from os.path import join
 import subprocess
 import json
 import re
+import time
 from datetime import datetime
-from typing import Dict
 
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
-progname = env.get("PROGNAME")
-lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
-manifest_ran = False
 
-def infer_architecture(board_cfg):
-    try:
-        mcu = board_cfg.get("build.mcu") if board_cfg else None
-    except KeyError:
-        mcu = None
-    except Exception:
-        mcu = None
-    if not mcu:
-        return None
-    mcu_l = str(mcu).lower()
-    if "esp32s3" in mcu_l:
-        return "esp32-s3"
-    if "esp32c6" in mcu_l:
-        return "esp32-c6"
-    if "esp32c3" in mcu_l:
-        return "esp32-c3"
-    if "esp32" in mcu_l:
-        return "esp32"
-    if "rp2040" in mcu_l:
-        return "rp2040"
-    if "rp2350" in mcu_l:
-        return "rp2350"
-    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
-        return "nrf52840"
-    if "stm32" in mcu_l:
-        return "stm32"
-    return None
 
-def manifest_gather(source, target, env):
-    global manifest_ran
-    if manifest_ran:
-        return
-    # Skip manifest generation if we cannot determine architecture (host/native builds)
-    board_arch = infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
-        manifest_ran = True
-        return
-    manifest_ran = True
-    out = []
-    board_platform = env.BoardConfig().get("platform")
-    board_mcu = env.BoardConfig().get("build.mcu").lower()
-    needs_ota_suffix = board_platform == "nordicnrf52"
-    
-    # Mapping of bin files to their target partition names
-    # Maps the filename pattern to the partition name where it should be flashed
-    partition_map = {
-        f"{progname}.bin": "app0",              # primary application slot (app0 / OTA_0)
-        lfsbin: "spiffs",                        # filesystem image flashed to spiffs
-    }
-    
-    check_paths = [
-        progname,
-        f"{progname}.elf",
-        f"{progname}.bin",
-        f"{progname}.factory.bin",
-        f"{progname}.hex",
-        f"{progname}.merged.hex",
-        f"{progname}.uf2",
-        f"{progname}.factory.uf2",
-        f"{progname}.zip",
-        lfsbin,
-        f"mt-{board_mcu}-ota.bin",
-        "bleota-c3.bin"
-    ]
-    for p in check_paths:
-        f = env.File(env.subst(f"$BUILD_DIR/{p}"))
-        if f.exists():
-            manifest_name = p
-            if needs_ota_suffix and p == f"{progname}.zip":
-                manifest_name = f"{progname}-ota.zip"
-            d = {
-                "name": manifest_name,
-                "md5": f.get_content_hash(), # Returns MD5 hash
-                "bytes": f.get_size() # Returns file size in bytes
-            }
-            # Add part_name if this file represents a partition that should be flashed
-            if p in partition_map:
-                d["part_name"] = partition_map[p]
-            out.append(d)
-            print(d)
-    manifest_write(out, env)
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
 
-def manifest_write(files, env):
-    # Defensive: also skip manifest writing if we cannot determine architecture
-    def get_project_option(name):
-        try:
-            return env.GetProjectOption(name)
-        except Exception:
-            return None
+    app_offset = 0x10000
 
-    def get_project_option_any(names):
-        for name in names:
-            val = get_project_option(name)
-            if val is not None:
-                return val
-        return None
-
-    def as_bool(val):
-        return str(val).strip().lower() in ("1", "true", "yes", "on")
-
-    def as_int(val):
-        try:
-            return int(str(val), 10)
-        except (TypeError, ValueError):
-            return None
-
-    def as_list(val):
-        return [item.strip() for item in str(val).split(",") if item.strip()]
-
-    manifest = {
-        "version": verObj["long"],
-        "build_epoch": build_epoch,
-        "platformioTarget": env.get("PIOENV"),
-        "mcu": env.get("BOARD_MCU"),
-        "repo": repo_owner,
-        "files": files,
-        "has_mui": False,
-        "has_inkhud": False,
-    }
-    # Get partition table (generated in esp32_pre.py) if it exists
-    if env.get("custom_mtjson_part"):
-        # custom_mtjson_part is a JSON string, convert it back to a dict
-        pj = json.loads(env.get("custom_mtjson_part"))
-        manifest["part"] = pj
-    # Enable has_mui for TFT builds
-    if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-        manifest["has_mui"] = True
-    if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
-        manifest["has_inkhud"] = True
-
-    pioenv = env.get("PIOENV")
-    device_meta = {}
-    device_meta_fields = [
-        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
-        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
-        ("architecture", ["custom_meshtastic_architecture"], str),
-        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
-        ("displayName", ["custom_meshtastic_display_name"], str),
-        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
-        ("images", ["custom_meshtastic_images"], as_list),
-        ("tags", ["custom_meshtastic_tags"], as_list),
-        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
-        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
-        ("url", ["custom_meshtastic_url"], str),
-        ("key", ["custom_meshtastic_key"], str),
-        ("variant", ["custom_meshtastic_variant"], str),
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
     ]
 
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
 
-    for manifest_key, option_keys, caster in device_meta_fields:
-        raw_val = get_project_option_any(option_keys)
-        if raw_val is None:
-            continue
-        parsed = caster(raw_val) if callable(caster) else raw_val
-        if parsed is not None and parsed != "":
-            device_meta[manifest_key] = parsed
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
 
-    # Determine architecture once; if we can't infer it, skip manifest generation
-    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
-        return
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
 
-    device_meta["architecture"] = board_arch
+    esptool.main(cmd)
 
-    # Always set requiresDfu: true for nrf52840 targets
-    if board_arch == "nrf52840":
-        device_meta["requiresDfu"] = True
 
-    device_meta.setdefault("displayName", pioenv)
-    device_meta.setdefault("activelySupported", False)
+if platform.name == "espressif32":
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
 
-    if device_meta:
-        manifest.update(device_meta)
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
 
-    # Write the manifest to the build directory
-    with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
-        json.dump(manifest, f, indent=2)
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
+                                        "Generating UF2 file"))
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print(f"Using meshtastic platformio-custom.py, firmware version {verObj['long']} on {env.get('PIOENV')}")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
 # get repository owner if git is installed
 try:
@@ -247,10 +139,10 @@ flags = [
         "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
-print("Using flags:")
+print ("Using flags:")
 for flag in flags:
     print(flag)
-
+    
 projenv.Append(
     CCFLAGS=flags,
 )
@@ -288,42 +180,4 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
-
-board_arch = infer_architecture(env.BoardConfig())
-should_skip_manifest = board_arch is None
-
-# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
-mtjson_deps = [] if should_skip_manifest else ["buildprog"]
-if not should_skip_manifest and platform.name == "espressif32":
-    # Build littlefs image as part of mtjson target
-    # Equivalent to `pio run -t buildfs`
-    target_lfs = env.DataToBin(
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
-    )
-    mtjson_deps.append(target_lfs)
-
-if should_skip_manifest:
-    def skip_manifest(source, target, env):
-        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
-
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[skip_manifest],
-        title="Meshtastic Manifest (skipped)",
-        description="mtjson generation is skipped for native environments",
-        always_build=True,
-    )
-else:
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[manifest_gather],
-        title="Meshtastic Manifest",
-        description="Generating Meshtastic manifest JSON + Checksums",
-        always_build=True,
-    )
-
-    # Run manifest generation as part of the default build pipeline for non-native builds.
-    env.Default("mtjson")
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)

bin/platformio-pre.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-Import("env")
-platform = env.PioPlatform()
-
-if platform.name == "native":
-    env.Replace(PROGNAME="meshtasticd")
-else:
-    from readprops import readProps
-    prefsLoc = env["PROJECT_DIR"] + "/version.properties"
-    verObj = readProps(prefsLoc)
-    env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
-
-# Print the new program name for verification
-print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

bin/readprops.py

@@ -18,9 +18,8 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
             .decode("utf-8")
             .strip()
         )

bin/shame.py

@@ -1,95 +0,0 @@
-import sys
-import os
-import json
-from github import Github
-
-def parseFile(path):
-    with open(path, "r") as f:
-        data = json.loads(f)
-    for file in data["files"]:
-        if file["name"].endswith(".bin"):
-            return file["name"], file["bytes"]
-
-if len(sys.argv) != 4:
-    print(f"expected usage: {sys.argv[0]} <PR number> <path to old-manifests> <path to new-manifests>")
-    sys.exit(1)
-
-pr_number = int(sys.argv[1])
-
-token = os.getenv("GITHUB_TOKEN")
-if not token:
-    raise EnvironmentError("GITHUB_TOKEN not found in environment.")
-
-repo_name = os.getenv("GITHUB_REPOSITORY")  # "owner/repo"
-if not repo_name:
-    raise EnvironmentError("GITHUB_REPOSITORY not found in environment.")
-
-oldFiles = sys.argv[2]
-old = set(os.path.join(oldFiles, f) for f in os.listdir(oldFiles) if os.path.isfile(f))
-newFiles = sys.argv[3]
-new = set(os.path.join(newFiles, f) for f in os.listdir(newFiles) if os.path.isfile(f))
-
-startMarkdown = "# Target Size Changes\n\n"
-markdown = ""
-
-newlyIntroduced = new - old
-if len(newlyIntroduced) > 0:
-    markdown += "## Newly Introduced Targets\n\n"
-    # create a table
-    markdown += "| File | Size |\n"
-    markdown += "| ---- | ---- |\n"
-    for f in newlyIntroduced:
-        name, size = parseFile(f)
-        markdown += f"| `{name}` | {size}b |\n"
-
-# do not log removed targets
-# PRs only run a small subset of builds, so removed targets are not meaningful
-# since they are very likely to just be not ran in PR CI
-
-both = old & new
-degradations = []
-improvements = []
-for f in both:
-    oldName, oldSize = parseFile(f)
-    _, newSize = parseFile(f)
-    if oldSize != newSize:
-        if newSize < oldSize:
-            improvements.append((oldName, oldSize, newSize))
-        else:
-            degradations.append((oldName, oldSize, newSize))
-
-if len(degradations) > 0:
-    markdown += "\n## Degradation\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in degradations:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(improvements) > 0:
-    markdown += "\n## Improvement\n\n"
-    # create a table
-    markdown += "| File | Difference | Old Size | New Size |\n"
-    markdown += "| ---- | ---------- | -------- | -------- |\n"
-    for oldName, oldSize, newSize in improvements:
-        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
-
-if len(markdown) == 0:
-    markdown = "No changes in target sizes detected."
-
-g = Github(token)
-repo = g.get_repo(repo_name)
-pr = repo.get_pull(pr_number)
-
-existing_comment = None
-for comment in pr.get_issue_comments():
-    if comment.body.startswith(startMarkdown):
-        existing_comment = comment
-        break
-
-final_markdown = startMarkdown + markdown
-
-if existing_comment:
-    existing_comment.edit(body=final_markdown)
-else:
-    pr.create_issue_comment(body=final_markdown)

bin/test-simulator.sh

@@ -3,7 +3,7 @@
 set -e
 
 echo "Starting simulator"
-.pio/build/native/meshtasticd -s &
+.pio/build/native/program &
 sleep 20 # 5 seconds was not enough
 
 echo "Simulator started, launching python test..."

boards/CDEBYTE_EoRa-Hub.json

@@ -1,38 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "CDEBYTE_EoRa-Hub",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.cdebyte.com/products/EoRa-HUB-900TB",
-  "vendor": "CDEBYTE"
-}

boards/ThinkNode-M4.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M4 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m4",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M4",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode m4",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m4-power-bank-lora-device-with-meshtastic-lora-tracker-function-powered-by-nrf52840.html",
-  "vendor": "ELECROW"
-}

boards/minimesh_lite.json

@@ -1,50 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DMINIMESH_LITE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "Minimesh Lite",
-    "mcu": "nrf52840",
-    "variant": "dls_Minimesh_Lite",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
-  },
-  "frameworks": ["arduino"],
-  "name": "Minimesh Lite",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://deeplabstudio.com",
-  "vendor": "Deeplab Studio"
-}

boards/t-beam-1w.json

@@ -1,39 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DLILYGO_TBEAM_1W",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "opi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "t-beam-1w"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "LilyGo TBeam-1W",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "http://www.lilygo.cn/",
-  "vendor": "LilyGo"
-}

boards/t-watch-s3.json

@@ -9,7 +9,7 @@
       "-DBOARD_HAS_PSRAM",
       "-DT_WATCH_S3",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

debian/changelog

@@ -1,15 +1,3 @@
-meshtasticd (2.7.19.0) unstable; urgency=medium
-
-  * Version 2.7.19
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 22 Jan 2026 22:17:40 +0000
-
-meshtasticd (2.7.18.0) unstable; urgency=medium
-
-  * Version 2.7.18
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 02 Jan 2026 12:45:36 +0000
-
 meshtasticd (2.7.17.0) unstable; urgency=medium
 
   * Version 2.7.17

debian/control

@@ -25,8 +25,7 @@ Build-Depends: debhelper-compat (= 13),
                liborcania-dev,
                libx11-dev,
                libinput-dev,
-               libxkbcommon-x11-dev,
-               libsqlite3-dev
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no

debian/meshtasticd.install

@@ -4,6 +4,5 @@ bin/config.yaml                    etc/meshtasticd
 bin/config.d/*                     etc/meshtasticd/available.d
 
 bin/meshtasticd.service            lib/systemd/system
-bin/meshtasticd-start.sh           usr/bin
 
 web/*                              usr/share/meshtasticd/web

debian/rules

@@ -28,4 +28,5 @@ override_dh_auto_build:
 	# Build with platformio
 	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

extra_scripts/disable_adafruit_usb.py

@@ -1,9 +1,10 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(flake8/F821)
 # trunk-ignore-all(ruff/F821)
 
 Import("env")
 
+# NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
+
 # print("Current CLI targets", COMMAND_LINE_TARGETS)
 # print("Current Build targets", BUILD_TARGETS)
 # print("CPP defs", env.get("CPPDEFINES"))

extra_scripts/esp32_extra.py

@@ -1,86 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-# trunk-ignore-all(ruff/E402): Hacky esptool import
-# trunk-ignore-all(flake8/E402): Hacky esptool import
-import sys
-from os.path import join
-
-Import("env")
-platform = env.PioPlatform()
-
-sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
-import esptool
-
-
-def esp32_create_combined_bin(source, target, env):
-    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
-    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
-    print("Generating combined binary for serial flashing")
-
-    app_offset = 0x10000
-
-    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
-    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
-    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
-    chip = env.get("BOARD_MCU")
-    board = env.BoardConfig()
-    flash_size = board.get("upload.flash_size")
-    flash_freq = board.get("build.f_flash", "40m")
-    flash_freq = flash_freq.replace("000000L", "m")
-    flash_mode = board.get("build.flash_mode", "dio")
-    memory_type = board.get("build.arduino.memory_type", "qio_qspi")
-    if flash_mode == "qio" or flash_mode == "qout":
-        flash_mode = "dio"
-    if memory_type == "opi_opi" or memory_type == "opi_qspi":
-        flash_mode = "dout"
-    cmd = [
-        "--chip",
-        chip,
-        "merge_bin",
-        "-o",
-        new_file_name,
-        "--flash_mode",
-        flash_mode,
-        "--flash_freq",
-        flash_freq,
-        "--flash_size",
-        flash_size,
-    ]
-
-    print("    Offset | File")
-    for section in sections:
-        sect_adr, sect_file = section.split(" ", 1)
-        print(f" -  {sect_adr} | {sect_file}")
-        cmd += [sect_adr, sect_file]
-
-    print(f" - {hex(app_offset)} | {firmware_name}")
-    cmd += [hex(app_offset), firmware_name]
-
-    print("Using esptool.py arguments: %s" % " ".join(cmd))
-
-    esptool.main(cmd)
-
-
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
-
-esp32_kind = env.GetProjectOption("custom_esp32_kind")
-if esp32_kind == "esp32":
-    # Free up some IRAM by removing auxiliary SPI flash chip drivers.
-    # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
-    env.Append(
-        LINKFLAGS=[
-            "-Wl,--wrap=esp_flash_chip_gd",
-            "-Wl,--wrap=esp_flash_chip_issi",
-            "-Wl,--wrap=esp_flash_chip_winbond",
-        ]
-    )
-else:
-    # For newer ESP32 targets, using newlib nano works better.
-    env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

extra_scripts/esp32_pre.py

@@ -1,73 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-import json
-import sys
-from os.path import isfile
-
-Import("env")
-
-
-# From https://github.com/platformio/platform-espressif32/blob/develop/builder/main.py
-def _parse_size(value):
-    if isinstance(value, int):
-        return value
-    elif value.isdigit():
-        return int(value)
-    elif value.startswith("0x"):
-        return int(value, 16)
-    elif value[-1].upper() in ("K", "M"):
-        base = 1024 if value[-1].upper() == "K" else 1024 * 1024
-        return int(value[:-1]) * base
-    return value
-
-
-def _parse_partitions(env):
-    partitions_csv = env.subst("$PARTITIONS_TABLE_CSV")
-    if not isfile(partitions_csv):
-        sys.stderr.write(
-            "Could not find the file %s with partitions " "table.\n" % partitions_csv
-        )
-        env.Exit(1)
-        return
-
-    result = []
-    # The first offset is 0x9000 because partition table is flashed to 0x8000 and
-    # occupies an entire flash sector, which size is 0x1000
-    next_offset = 0x9000
-    with open(partitions_csv) as fp:
-        for line in fp.readlines():
-            line = line.strip()
-            if not line or line.startswith("#"):
-                continue
-            tokens = [t.strip() for t in line.split(",")]
-            if len(tokens) < 5:
-                continue
-
-            bound = 0x10000 if tokens[1] in ("0", "app") else 4
-            calculated_offset = (next_offset + bound - 1) & ~(bound - 1)
-            partition = {
-                "name": tokens[0],
-                "type": tokens[1],
-                "subtype": tokens[2],
-                "offset": tokens[3] or calculated_offset,
-                "size": tokens[4],
-                "flags": tokens[5] if len(tokens) > 5 else None,
-            }
-            result.append(partition)
-            next_offset = _parse_size(partition["offset"]) + _parse_size(
-                partition["size"]
-            )
-
-    return result
-
-
-def mtjson_esp32_part(target, source, env):
-    part = _parse_partitions(env)
-    pj = json.dumps(part)
-    # print(f"JSON_PARTITIONS: {pj}")
-    # Dump json string to 'custom_mtjson_part' variable to use later when writing the manifest
-    env.Replace(custom_mtjson_part=pj)
-
-
-env.AddPreAction("mtjson", mtjson_esp32_part)

extra_scripts/extra_stm32.py

@@ -1,9 +1,7 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 
 Import("env")
-
 # Custom HEX from ELF
 env.AddPostAction(
     "$BUILD_DIR/${PROGNAME}.elf",

extra_scripts/nrf52_extra.py

@@ -1,50 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-import sys
-from os.path import basename
-
-Import("env")
-
-
-# Custom HEX from ELF
-# Convert hex to uf2 for nrf52
-def nrf52_hex_to_uf2(source, target, env):
-    hex_path = target[0].get_abspath()
-    # When using merged hex, drop 'merged' from uf2 filename
-    uf2_path = hex_path.replace(".merged.", ".")
-    uf2_path = uf2_path.replace(".hex", ".uf2")
-    env.Execute(
-        env.VerboseAction(
-            f'"{sys.executable}" ./bin/uf2conv.py "{hex_path}" -c -f 0xADA52840 -o "{uf2_path}"',
-            f"Generating UF2 file from {basename(hex_path)}",
-        )
-    )
-
-
-def nrf52_mergehex(source, target, env):
-    hex_path = target[0].get_abspath()
-    merged_hex_path = hex_path.replace(".hex", ".merged.hex")
-    merge_with = None
-    if "wio-sdk-wm1110" == str(env.get("PIOENV")):
-        merge_with = env.subst("$PROJECT_DIR/bin/s140_nrf52_7.3.0_softdevice.hex")
-    else:
-        print("merge_with not defined for this target")
-
-    if merge_with is not None:
-        env.Execute(
-            env.VerboseAction(
-                f'"$PROJECT_DIR/bin/mergehex" -m "{hex_path}" "{merge_with}" -o "{merged_hex_path}"',
-                "Merging HEX with SoftDevice",
-            )
-        )
-        print(f'Merged file saved at "{basename(merged_hex_path)}"')
-        nrf52_hex_to_uf2([hex_path, merge_with], [env.File(merged_hex_path)], env)
-
-
-# if WM1110 target, merge hex with softdevice 7.3.0
-if "wio-sdk-wm1110" == env.get("PIOENV"):
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_mergehex)
-else:
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_hex_to_uf2)

meshtasticd.spec.rpkg

@@ -39,7 +39,6 @@ BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
 BuildRequires: pkgconfig(libuv)
-BuildRequires: pkgconfig(sqlite3)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
@@ -77,7 +76,7 @@ platformio run -e native-tft
 %install
 # Install meshtasticd binary
 mkdir -p %{buildroot}%{_bindir}
-install -m 0755 .pio/build/native-tft/meshtasticd %{buildroot}%{_bindir}/meshtasticd
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
 # Install portduino VFS dir
 install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd
@@ -96,9 +95,6 @@ cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 # Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
-# Install meshtasticd start wrapper
-install -D -m 0755 bin/meshtasticd-start.sh %{buildroot}%{_bindir}/meshtasticd-start.sh
-
 # Install the web files under /usr/share/meshtasticd/web
 mkdir -p %{buildroot}%{_datadir}/meshtasticd/web
 cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web

monitor/filter_c3_exception_decoder.py

@@ -43,11 +43,13 @@ class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
         self.enabled = self.setup_paths()
 
         if self.config.get("env:" + self.environment, "build_type") != "debug":
-            print("""
+            print(
+                """
 Please build project in debug configuration to get more details about an exception.
 See https://docs.platformio.org/page/projectconf/build_configurations.html
 
-""")
+"""
+            )
 
         return self
 

platformio.ini

@@ -14,9 +14,7 @@ description = Meshtastic
 
 [env]
 test_build_src = true
-extra_scripts =
-	pre:bin/platformio-pre.py
-	bin/platformio-custom.py
+extra_scripts = bin/platformio-custom.py
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
@@ -54,7 +52,6 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
-	-DMESHTASTIC_EXCLUDE_POWERMON=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
@@ -65,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/b34c6817c25d6faabb3a8a162b5d14fb75395433.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -104,22 +101,27 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
-
-; Extra TCP/IP networking libs for supported devices
-[networking_extra]
-lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.5.0
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37ad715b76cd6ca4aa500a4a4d9740e3cdf3e3cb.zip
+	https://github.com/meshtastic/device-ui/archive/3bf332240416c5cb8c919fac2a0ec7260eb3be75.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -129,7 +131,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
-	adafruit/Adafruit BMP280 Library@3.0.0
+	adafruit/Adafruit BMP280 Library@2.6.8
 	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
@@ -142,6 +144,8 @@ lib_deps =
 	adafruit/Adafruit INA260 Library@1.5.3
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
+	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
+	adafruit/Adafruit PM25 AQI Sensor@2.0.0
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
 	adafruit/Adafruit MPU6050@2.2.6
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
@@ -156,8 +160,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
-	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
+	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
+	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -165,7 +169,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.6
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -178,8 +182,8 @@ lib_deps =
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
+	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
+	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -201,7 +205,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
+	ClosedCube OPT3001@1.1.2
 	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
 	boschsensortec/bsec2@1.10.2610
 	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
@@ -212,30 +216,3 @@ lib_deps =
 	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
-; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
-[environmental_extra_no_bsec]
-lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
-	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
-	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
-	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
-	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
-	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
-	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
-	sensirion/Sensirion I2C SCD4x@1.1.0

src/DebugConfiguration.cpp

@@ -41,8 +41,7 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...)
 }
 
 #if HAS_NETWORKING
-namespace meshtastic
-{
+
 Syslog::Syslog(UDP &client)
 {
     this->_client = &client;
@@ -196,6 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-}; // namespace meshtastic
-
 #endif

src/DebugConfiguration.h

@@ -162,8 +162,6 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 
 #if HAS_NETWORKING
 
-namespace meshtastic
-{
 class Syslog
 {
   private:
@@ -197,6 +195,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-}; // namespace meshtastic
-
-#endif // HAS_NETWORKING
+#endif // HAS_NETWORKING

src/DisplayFormatters.cpp

@@ -31,9 +31,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         return useShortName ? "LongF" : "LongFast";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        return useShortName ? "LongT" : "LongTurbo";
-        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;

src/MessageStore.cpp

@@ -13,11 +13,6 @@
 #define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
 #endif
 
-// Default autosave interval 2 hours, override per device later with -DMESSAGE_AUTOSAVE_INTERVAL_SEC=300 (etc)
-#ifndef MESSAGE_AUTOSAVE_INTERVAL_SEC
-#define MESSAGE_AUTOSAVE_INTERVAL_SEC (2 * 60 * 60)
-#endif
-
 // Global message text pool and state
 static char *g_messagePool = nullptr;
 static size_t g_poolWritePos = 0;
@@ -107,60 +102,6 @@ void MessageStore::addLiveMessage(const StoredMessage &msg)
     pushWithLimit(liveMessages, msg);
 }
 
-#if ENABLE_MESSAGE_PERSISTENCE
-static bool g_messageStoreHasUnsavedChanges = false;
-static uint32_t g_lastAutoSaveMs = 0; // last time we actually saved
-
-static inline uint32_t autosaveIntervalMs()
-{
-    uint32_t sec = (uint32_t)MESSAGE_AUTOSAVE_INTERVAL_SEC;
-    if (sec < 60)
-        sec = 60;
-    return sec * 1000UL;
-}
-
-static inline bool reachedMs(uint32_t now, uint32_t target)
-{
-    return (int32_t)(now - target) >= 0;
-}
-
-// Mark new messages in RAM that need to be saved later
-static inline void markMessageStoreUnsaved()
-{
-    g_messageStoreHasUnsavedChanges = true;
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = millis();
-    }
-}
-
-// Called periodically from the main loop in main.cpp
-static inline void autosaveTick(MessageStore *store)
-{
-    if (!store)
-        return;
-
-    uint32_t now = millis();
-
-    if (g_lastAutoSaveMs == 0) {
-        g_lastAutoSaveMs = now;
-        return;
-    }
-
-    if (!reachedMs(now, g_lastAutoSaveMs + autosaveIntervalMs()))
-        return;
-
-    // Autosave interval reached, only save if there are unsaved messages.
-    if (g_messageStoreHasUnsavedChanges) {
-        LOG_INFO("Autosaving MessageStore to flash");
-        store->saveToFlash();
-    } else {
-        LOG_INFO("Autosave skipped, no changes to save");
-        g_lastAutoSaveMs = now;
-    }
-}
-#endif
-
 // Add from incoming/outgoing packet
 const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &packet)
 {
@@ -190,11 +131,6 @@ const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &pa
     }
 
     addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
-
     return liveMessages.back();
 }
 
@@ -219,10 +155,6 @@ void MessageStore::addFromString(uint32_t sender, uint8_t channelIndex, const st
     sm.ackStatus = AckStatus::NONE;
 
     addLiveMessage(sm);
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    markMessageStoreUnsaved();
-#endif
 }
 
 #if ENABLE_MESSAGE_PERSISTENCE
@@ -307,10 +239,6 @@ void MessageStore::saveToFlash()
 
     f.close();
 #endif
-
-    // Reset autosave state after any save
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
 }
 
 void MessageStore::loadFromFlash()
@@ -342,9 +270,6 @@ void MessageStore::loadFromFlash()
 
     f.close();
 #endif
-    // Loading messages does not trigger an autosave
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
 }
 
 #else
@@ -365,34 +290,28 @@ void MessageStore::clearAllMessages()
     f.write(&count, 1); // write "0 messages"
     f.close();
 #endif
-
-#if ENABLE_MESSAGE_PERSISTENCE
-    g_messageStoreHasUnsavedChanges = false;
-    g_lastAutoSaveMs = millis();
-#endif
 }
 
 // Internal helper: erase first or last message matching a predicate
 template <typename Predicate> static void eraseIf(std::deque<StoredMessage> &deque, Predicate pred, bool fromBack = false)
 {
     if (fromBack) {
-        // Iterate from the back and erase all matches from the end
-        for (auto it = deque.rbegin(); it != deque.rend();) {
+        // Iterate from the back and erase the first match from the end
+        for (auto it = deque.rbegin(); it != deque.rend(); ++it) {
             if (pred(*it)) {
-                it = std::deque<StoredMessage>::reverse_iterator(deque.erase(std::next(it).base()));
-            } else {
-                ++it;
+                deque.erase(std::next(it).base());
+                break;
             }
         }
     } else {
-        // Manual forward search to erase all matches
-        for (auto it = deque.begin(); it != deque.end();) {
-            if (pred(*it)) {
-                it = deque.erase(it);
-            } else {
-                ++it;
-            }
+        // Manual forward search to avoid std::find_if
+        auto it = deque.begin();
+        for (; it != deque.end(); ++it) {
+            if (pred(*it))
+                break;
         }
+        if (it != deque.end())
+            deque.erase(it);
     }
 }
 
@@ -501,14 +420,6 @@ uint16_t MessageStore::storeText(const char *src, size_t len)
     return storeTextInPool(src, len);
 }
 
-#if ENABLE_MESSAGE_PERSISTENCE
-void messageStoreAutosaveTick()
-{
-    // Called from the main loop to check autosave timing
-    autosaveTick(&messageStore);
-}
-#endif
-
 // Global definition
 MessageStore messageStore("default");
-#endif
+#endif

src/MessageStore.h

@@ -125,11 +125,6 @@ class MessageStore
     std::string filename;                   // Flash filename for persistence
 };
 
-#if ENABLE_MESSAGE_PERSISTENCE
-// Called periodically from main loop to trigger time based autosave
-void messageStoreAutosaveTick();
-#endif
-
 // Global instance (defined in MessageStore.cpp)
 extern MessageStore messageStore;
 

src/Power.cpp

@@ -1,14 +1,11 @@
 /**
  * @file Power.cpp
- * @brief This file contains the implementation of the Power class, which is
- * responsible for managing power-related functionality of the device. It
- * includes battery level sensing, power management unit (PMU) control, and
- * power state machine management. The Power class is used by the main device
- * class to manage power-related functionality.
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
  *
- * The file also includes implementations of various battery level sensors, such
- * as the AnalogBatteryLevel class, which assumes the battery voltage is
- * attached via a voltage-divider to an analog input.
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
  *
  * This file is part of the Meshtastic project.
  * For more information, see: https://meshtastic.org/
@@ -22,7 +19,6 @@
 #include "configuration.h"
 #include "main.h"
 #include "meshUtils.h"
-#include "power/PowerHAL.h"
 #include "sleep.h"
 
 #if defined(ARCH_PORTDUINO)
@@ -175,12 +171,22 @@ Power *power;
 
 using namespace meshtastic;
 
-// NRF52 has AREF_VOLTAGE defined in architecture.h but
-// make sure it's included. If something is wrong with NRF52
-// definition - compilation will fail on missing definition
-#if !defined(AREF_VOLTAGE) && !defined(ARCH_NRF52)
+#ifndef AREF_VOLTAGE
+#if defined(ARCH_NRF52)
+/*
+ * Internal Reference is +/-0.6V, with an adjustable gain of 1/6, 1/5, 1/4,
+ * 1/3, 1/2 or 1, meaning 3.6, 3.0, 2.4, 1.8, 1.2 or 0.6V for the ADC levels.
+ *
+ * External Reference is VDD/4, with an adjustable gain of 1, 2 or 4, meaning
+ * VDD/4, VDD/2 or VDD for the ADC levels.
+ *
+ * Default settings are internal reference with 1/6 gain (GND..3.6V ADC range)
+ */
+#define AREF_VOLTAGE 3.6
+#else
 #define AREF_VOLTAGE 3.3
 #endif
+#endif
 
 /**
  * If this board has a battery level sensor, set this to a valid implementation
@@ -227,8 +233,7 @@ static void battery_adcDisable()
 #endif
 
 /**
- * A simple battery level sensor that assumes the battery voltage is attached
- * via a voltage-divider to an analog input
+ * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
@@ -306,8 +311,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
 #ifndef BATTERY_SENSE_SAMPLES
 #define BATTERY_SENSE_SAMPLES                                                                                                    \
-    15 // Set the number of samples, it has an effect of increasing sensitivity in
-       // complex electromagnetic environment.
+    15 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -337,8 +341,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             battery_adcDisable();
 
             if (!initial_read_done) {
-                // Flush the smoothing filter with an ADC reading, if the reading is
-                // plausibly correct
+                // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
                 if (scaled > last_read_value)
                     last_read_value = scaled;
                 initial_read_done = true;
@@ -347,8 +350,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u",
-            // BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t) (last_read_value));
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // (last_read_value));
         }
         return last_read_value;
 #endif // BATTERY_PIN
@@ -417,8 +420,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    // if we have a integrated device with a battery, we can assume that the
-    // battery is always connected
+    // if we have a integrated device with a battery, we can assume that the battery is always connected
 #ifdef BATTERY_IMMUTABLE
     virtual bool isBatteryConnect() override { return true; }
 #elif defined(ADC_V)
@@ -439,10 +441,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
 
-    /// If we see a battery voltage higher than physics allows - assume charger is
-    /// pumping in power On some boards we don't have the power management chip
-    /// (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect external power
-    /// source
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
+    /// On some boards we don't have the power management chip (like AXPxxxx)
+    /// so we use EXT_PWR_DETECT GPIO pin to detect external power source
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
@@ -459,12 +461,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-
-// technically speaking this should work for all(?) NRF52 boards
-// but needs testing across multiple devices. NRF52 USB would not even work if
-// VBUS was not properly connected and detected by the CPU
-#elif defined(MUZI_BASE) || defined(PROMICRO_DIY_TCXO)
-        return powerHAL_isVBUSConnected();
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -478,18 +476,15 @@ class AnalogBatteryLevel : public HasBatteryLevel
             return (rak9154Sensor.isCharging()) ? OptTrue : OptFalse;
         }
 #endif
-#if defined(ELECROW_ThinkNode_M6)
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value || isVbusIn();
-#elif EXT_CHRG_DETECT
+#ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #elif defined(BATTERY_CHARGING_INV)
         return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
-            // get current flow from INA sensor - negative value means power flowing
-            // into the battery default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT
-            // RESISTOR <--> INA_VIN- <--> LOAD
+            // get current flow from INA sensor - negative value means power flowing into the battery
+            // default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD
             LOG_DEBUG("Using INA on I2C addr 0x%x for charging detection", config.power.device_battery_ina_address);
 #if defined(INA_CHARGING_DETECTION_INVERT)
             return getINACurrent() > 0;
@@ -505,8 +500,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 
   private:
-    /// If we see a battery voltage higher than physics allows - assume charger is
-    /// pumping in power
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
 
     /// For heltecs with no battery connected, the measured voltage is 2204, so
     // need to be higher than that, in this case is 2500mV (3000-500)
@@ -515,8 +510,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
     // Start value from minimum voltage for the filter to not start from 0
     // that could trigger some events.
-    // This value is over-written by the first ADC reading, it the voltage seems
-    // reasonable.
+    // This value is over-written by the first ADC reading, it the voltage seems reasonable.
     bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
@@ -658,8 +652,7 @@ bool Power::analogInit()
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADC config based on Two Point values and fitting curve "
-                 "coefficients stored in eFuse");
+        LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse");
     }
 #endif
     else {
@@ -667,7 +660,13 @@ bool Power::analogInit()
     }
 #endif // ARCH_ESP32
 
-    // NRF52 ADC init moved to powerHAL_init in nrf52 platform
+#ifdef ARCH_NRF52
+#ifdef VBAT_AR_INTERNAL
+    analogReference(VBAT_AR_INTERNAL);
+#else
+    analogReference(AR_INTERNAL); // 3.6V
+#endif
+#endif // ARCH_NRF52
 
 #ifndef ARCH_ESP32
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
@@ -694,8 +693,6 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    } else if (serialBatteryInit()) {
-        found = true;
     } else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
@@ -722,16 +719,6 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;
@@ -778,8 +765,7 @@ void Power::reboot()
     HAL_NVIC_SystemReset();
 #else
     rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings "
-             "require a restart to be applied");
+    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
 #endif
 }
 
@@ -789,12 +775,9 @@ void Power::shutdown()
 #if HAS_SCREEN
     if (screen) {
 #ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!",
-                                 0); // T-Deck Pro has no power button
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
 #elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...",
-                                 2250); // dismiss after 3 seconds to avoid the
-                                        // banner on the sleep screen
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -833,8 +816,7 @@ void Power::readPowerStatus()
     int32_t batteryVoltageMv = -1; // Assume unknown
     int8_t batteryChargePercent = -1;
     OptionalBool usbPowered = OptUnknown;
-    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM
-                                          // code doesn't run every time
+    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
     OptionalBool isChargingNow = OptUnknown;
 
     if (batteryLevel) {
@@ -847,10 +829,9 @@ void Power::readPowerStatus()
             if (batteryLevel->getBatteryPercent() >= 0) {
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
-                // If the AXP192 returns a percentage less than 0, the feature is either
-                // not supported or there is an error In that case, we compute an
-                // estimate of the charge percent based on open circuit voltage table
-                // defined in power.h
+                // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
+                // In that case, we compute an estimate of the charge percent based on open circuit voltage table defined
+                // in power.h
                 batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
                                                    ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
                                              0, 100);
@@ -858,12 +839,12 @@ void Power::readPowerStatus()
         }
     }
 
-// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way
-// better instead to make a Nrf52IsUsbPowered subclass (which shares a
-// superclass with the BatteryLevel stuff) that just provides a few methods. But
-// in the interest of fixing this bug I'm going to follow current practice.
-#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates
-               // the power states.  Takes 20 seconds or so to detect changes.
+// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way better instead to make a Nrf52IsUsbPowered subclass
+// (which shares a superclass with the BatteryLevel stuff)
+// that just provides a few methods.  But in the interest of fixing this bug I'm going to follow current
+// practice.
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
     // LOG_DEBUG("NRF Power %d", nrf_usb_state);
@@ -937,9 +918,8 @@ void Power::readPowerStatus()
 
 #endif
 
-    // If we have a battery at all and it is less than 0%, force deep sleep if we
-    // have more than 10 low readings in a row. NOTE: min LiIon/LiPo voltage
-    // is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+    // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+    // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
     //
 
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
@@ -961,8 +941,8 @@ int32_t Power::runOnce()
     readPowerStatus();
 
 #ifdef HAS_PMU
-    // WE no longer use the IRQ line to wake the CPU (due to false wakes from
-    // sleep), but we do poll the IRQ status by reading the registers over I2C
+    // WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
+    // the IRQ status by reading the registers over I2C
     if (PMU) {
 
         PMU->getIrqStatus();
@@ -1004,8 +984,7 @@ int32_t Power::runOnce()
         PMU->clearIrqStatus();
     }
 #endif
-    // Only read once every 20 seconds once the power status for the app has been
-    // initialized
+    // Only read once every 20 seconds once the power status for the app has been initialized
     return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
 }
 
@@ -1013,12 +992,10 @@ int32_t Power::runOnce()
  * Init the power manager chip
  *
  * axp192 power
-    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose
- comms to the axp192 because the OLED and the axp192 share the same i2c bus,
- instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max ->
- ESP32 (keep this on!) LDO1 30mA -> charges GPS backup battery // charges the
- tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
- not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
+    DCDC1 0.7-3.5V @ 1200mA max -> OLED // If you turn this off you'll lose comms to the axp192 because the OLED and the
+ axp192 share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this
+ on!) LDO1 30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of
+ days), can not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
  *
  */
 bool Power::axpChipInit()
@@ -1063,10 +1040,9 @@ bool Power::axpChipInit()
 
     if (!PMU) {
         /*
-         * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will
-         * be called at the same time. In order not to affect other devices, if the
-         * initialization of the PMU fails, Wire needs to be re-initialized once, if
-         * there are multiple devices sharing the bus.
+         * In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time.
+         * In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once,
+         * if there are multiple devices sharing the bus.
          * * */
 #ifndef PMU_USE_WIRE1
         w->begin(I2C_SDA, I2C_SCL);
@@ -1083,8 +1059,8 @@ bool Power::axpChipInit()
         PMU->enablePowerOutput(XPOWERS_LDO2);
 
         // oled module power channel,
-        // disable it will cause abnormal communication between boot and AXP power
-        // supply, do not turn it off
+        // disable it will cause abnormal communication between boot and AXP power supply,
+        // do not turn it off
         PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
         // enable oled power
         PMU->enablePowerOutput(XPOWERS_DCDC1);
@@ -1111,8 +1087,7 @@ bool Power::axpChipInit()
         PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
 
-        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it
-         * uses an AXP2101 power chip*/
+        /*The alternative version of T-Beam 1.1 differs from T-Beam V1.1 in that it uses an AXP2101 power chip*/
         if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
             // Unuse power channel
             PMU->disablePowerOutput(XPOWERS_DCDC2);
@@ -1147,8 +1122,8 @@ bool Power::axpChipInit()
             // t-beam s3 core
             /**
              * gnss module power channel
-             * The default ALDO4 is off, you need to turn on the GNSS power first,
-             * otherwise it will be invalid during initialization
+             * The default ALDO4 is off, you need to turn on the GNSS power first, otherwise it will be invalid during
+             * initialization
              */
             PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO4);
@@ -1174,11 +1149,11 @@ bool Power::axpChipInit()
             PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO1);
 
-            // sdcard (T-Beam S3) / gnns (T-Watch S3 Plus) power channel
+            // sdcard power channel
             PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
-#ifndef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_BLDO1);
-#else
+
+#ifdef T_WATCH_S3
             // DRV2605 power channel
             PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
             PMU->enablePowerOutput(XPOWERS_BLDO2);
@@ -1198,8 +1173,7 @@ bool Power::axpChipInit()
         // disable all axp chip interrupt
         PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
 
-        // Set the constant current charging current of AXP2101, temporarily use
-        // 500mA by default
+        // Set the constant current charging current of AXP2101, temporarily use 500mA by default
         PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
 
         // Set up the charging voltage
@@ -1265,12 +1239,11 @@ bool Power::axpChipInit()
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
 
-// We can safely ignore this approach for most (or all) boards because MCU
-// turned off earlier than battery discharged to 2.6V.
+// We can safely ignore this approach for most (or all) boards because MCU turned off
+// earlier than battery discharged to 2.6V.
 //
-// Unfortunately for now we can't use this killswitch for RAK4630-based boards
-// because they have a bug with battery voltage measurement. Probably it
-// sometimes drops to low values.
+// Unfortanly for now we can't use this killswitch for RAK4630-based boards because they have a bug with
+// battery voltage measurement. Probably it sometimes drops to low values.
 #ifndef RAK4630
     // Set PMU shutdown voltage at 2.6V to maximize battery utilization
     PMU->setSysPowerDownVoltage(2600);
@@ -1289,12 +1262,10 @@ bool Power::axpChipInit()
     attachInterrupt(
         PMU_IRQ, [] { pmu_irq = true; }, FALLING);
 
-    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ
-    // because it occurs repeatedly while there is no battery also it could cause
-    // inadvertent waking from light sleep just because the battery filled we
-    // don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while
-    // no battery installed we don't look at AXPXXX_VBUS_REMOVED_IRQ because we
-    // don't have anything hooked to vbus
+    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
+    // no battery also it could cause inadvertent waking from light sleep just because the battery filled
+    // we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
+    // we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
     PMU->enableIRQ(pmuIrqMask);
 
     PMU->clearIrqStatus();
@@ -1410,8 +1381,8 @@ class LipoCharger : public HasBatteryLevel
             bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will
-                // protect PPM->setSysPowerDownVoltage(3100);
+                // Set the minimum operating voltage. Below this voltage, the PPM will protect
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
                 // PPM->setInputCurrentLimit(800);
@@ -1434,8 +1405,7 @@ class LipoCharger : public HasBatteryLevel
                 PPM->enableMeasure();
 
                 // Turn on charging function
-                // If there is no battery connected, do not turn on the charging
-                // function
+                // If there is no battery connected, do not turn on the charging function
                 PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
@@ -1470,8 +1440,7 @@ class LipoCharger : public HasBatteryLevel
     virtual int getBatteryPercent() override
     {
         return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent,
-        // it is not calibrated
+        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
     }
 
     /**
@@ -1593,143 +1562,10 @@ bool Power::meshSolarInit()
 
 #else
 /**
- * The meshSolar battery level sensor is unavailable - default to
- * AnalogBatteryLevel
+ * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
  */
 bool Power::meshSolarInit()
 {
     return false;
 }
 #endif
-
-#ifdef HAS_SERIAL_BATTERY_LEVEL
-#include <SoftwareSerial.h>
-
-/**
- * SerialBatteryLevel class for pulling battery information from a secondary MCU over serial.
- */
-class SerialBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        BatterySerial.begin(4800);
-
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return v_percent; }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return voltage * 1000; }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override
-    {
-        // definitely need to gobble up more bytes at once
-        if (BatterySerial.available() > 5) {
-            // LOG_WARN("SerialBatteryLevel: %u bytes available", BatterySerial.available());
-            while (BatterySerial.available() > 11) {
-                BatterySerial.read(); // flush old data
-            }
-            // LOG_WARN("SerialBatteryLevel: %u bytes now available", BatterySerial.available());
-            int tries = 0;
-            while (BatterySerial.read() != 0xFE) {
-                tries++; // wait for start byte
-                if (tries > 10) {
-                    LOG_WARN("SerialBatteryLevel: no start byte found");
-                    return 1;
-                }
-            }
-
-            Data[1] = BatterySerial.read();
-            Data[2] = BatterySerial.read();
-            Data[3] = BatterySerial.read();
-            Data[4] = BatterySerial.read();
-            Data[5] = BatterySerial.read();
-            if (Data[5] != 0xFD) {
-                LOG_WARN("SerialBatteryLevel: invalid end byte %02x", Data[5]);
-                return true;
-            }
-            v_percent = Data[1];
-            voltage = Data[2] + (((float)Data[3]) / 100) + (((float)Data[4]) / 10000);
-            voltage *= 2;
-            // LOG_WARN("SerialBatteryLevel: received data %u, %f, %02x", v_percent, voltage, Data[5]);
-            return true;
-        }
-        // This function runs first, so use it to grab the latest data from the secondary MCU
-        return true;
-    }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override
-    {
-#if defined(EXT_CHRG_DETECT)
-
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-
-#endif
-        return false;
-    }
-
-    virtual bool isCharging() override
-    {
-#ifdef EXT_CHRG_DETECT
-        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-
-#endif
-        // by default, we check the battery voltage only
-        return isVbusIn();
-    }
-
-  private:
-    SoftwareSerial BatterySerial = SoftwareSerial(SERIAL_BATTERY_RX, SERIAL_BATTERY_TX);
-    uint8_t Data[6] = {0};
-    int v_percent = 0;
-    float voltage = 0.0;
-};
-
-SerialBatteryLevel serialBatteryLevel;
-
-/**
- * Init the serial battery level sensor
- */
-bool Power::serialBatteryInit()
-{
-#ifdef EXT_PWR_DETECT
-    pinMode(EXT_PWR_DETECT, INPUT);
-#endif
-#ifdef EXT_CHRG_DETECT
-    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
-#endif
-
-    bool result = serialBatteryLevel.runOnce();
-    LOG_DEBUG("Power::serialBatteryInit serial battery sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &serialBatteryLevel;
-    return true;
-}
-
-#else
-/**
- * If this device has no serial battery level sensor, don't try to use it.
- */
-bool Power::serialBatteryInit()
-{
-    return false;
-}
-#endif

src/RedirectablePrint.cpp

@@ -18,7 +18,7 @@
 #endif
 
 #if HAS_NETWORKING
-extern meshtastic::Syslog syslog;
+extern Syslog syslog;
 #endif
 void RedirectablePrint::rpInit()
 {

src/SafeFile.cpp

@@ -54,7 +54,7 @@ size_t SafeFile::write(const uint8_t *buffer, size_t size)
 }
 
 /**
- * Atomically close the file (overwriting any old version) and readback the contents to confirm the hash matches
+ * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
  *
  * @return false for failure
  */
@@ -73,7 +73,15 @@ bool SafeFile::close()
     if (!testReadback())
         return false;
 
-    // Rename or overwrite (atomic operation)
+    { // Scope for lock
+        concurrency::LockGuard g(spiLock);
+        // brief window of risk here ;-)
+        if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
+            LOG_ERROR("Can't remove old pref file");
+            return false;
+        }
+    }
+
     String filenameTmp = filename;
     filenameTmp += ".tmp";
     if (!renameFile(filenameTmp.c_str(), filename.c_str())) {

src/buzz/BuzzerFeedbackThread.cpp

@@ -22,19 +22,12 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
-#ifdef INPUTDRIVER_ENCODER_TYPE
-    case INPUT_BROKER_SELECT:
-    case INPUT_BROKER_SELECT_LONG:
-        playClick();
-        break;
-#else
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
     case INPUT_BROKER_SELECT:
     case INPUT_BROKER_SELECT_LONG:
-        playBeep();
+        playBeep(); // Confirmation feedback
         break;
-#endif
 
     case INPUT_BROKER_UP:
     case INPUT_BROKER_UP_LONG:
@@ -65,4 +58,4 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     }
 
     return 0; // Allow other handlers to process the event
-}
+}

src/buzz/buzz.cpp

@@ -16,7 +16,6 @@ struct ToneDuration {
 };
 
 // Some common frequencies.
-#define NOTE_SILENT 1
 #define NOTE_C3 131
 #define NOTE_CS3 139
 #define NOTE_D3 147
@@ -30,24 +29,11 @@ struct ToneDuration {
 #define NOTE_AS3 233
 #define NOTE_B3 247
 #define NOTE_CS4 277
-#define NOTE_B4 494
-#define NOTE_F5 698
-#define NOTE_G6 1568
-#define NOTE_E7 2637
 
-#define NOTE_C4 262
-#define NOTE_E4 330
-#define NOTE_G4 392
-#define NOTE_A4 440
-#define NOTE_C5 523
-#define NOTE_E5 659
-#define NOTE_G5 784
-
-const int DURATION_1_16 = 62;  // 1/16 note
 const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
 const int DURATION_1_2 = 500;  // 1/2 note
-const int DURATION_3_4 = 750;  // 3/4 note
+const int DURATION_3_4 = 750;  // 1/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
 void playTones(const ToneDuration *tone_durations, int size)
@@ -73,7 +59,7 @@ void playTones(const ToneDuration *tone_durations, int size)
 
 void playBeep()
 {
-    ToneDuration melody[] = {{NOTE_B3, DURATION_1_16}};
+    ToneDuration melody[] = {{NOTE_B3, DURATION_1_8}};
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
@@ -85,24 +71,13 @@ void playLongBeep()
 
 void playGPSEnableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {
-        {NOTE_F5, DURATION_1_2}, {NOTE_G6, DURATION_1_8}, {NOTE_E7, DURATION_1_4}, {NOTE_SILENT, DURATION_1_2}};
-#else
     ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
 void playGPSDisableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {{NOTE_B4, DURATION_1_16}, {NOTE_B4, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_F3, DURATION_1_16}, {NOTE_F3, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_C3, DURATION_1_1},  {NOTE_SILENT, DURATION_1_1}};
-#else
     ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_C3, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
@@ -121,14 +96,7 @@ void playShutdownMelody()
 void playChirp()
 {
     // A short, friendly "chirp" sound for key presses
-    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Short AS3 note
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
-void playClick()
-{
-    // A very short "click" sound with minimum delay; ideal for rotary encoder events
-    ToneDuration melody[] = {{NOTE_AS3, 1}}; // Very Short AS3
+    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Very short AS3 note
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
@@ -197,17 +165,3 @@ void playComboTune()
     };
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
-
-void play4ClickDown()
-{
-    ToneDuration melody[] = {{NOTE_G5, 55}, {NOTE_E5, 55}, {NOTE_C5, 60},  {NOTE_A4, 55},  {NOTE_G4, 55},
-                             {NOTE_E4, 65}, {NOTE_C4, 80}, {NOTE_G3, 120}, {NOTE_E3, 160}, {NOTE_SILENT, 120}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
-void play4ClickUp()
-{
-    // Quick high-pitched notes with trills
-    ToneDuration melody[] = {{NOTE_F5, 50}, {NOTE_G6, 45}, {NOTE_E7, 60}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}

src/buzz/buzz.h

@@ -7,11 +7,8 @@ void playShutdownMelody();
 void playGPSEnableBeep();
 void playGPSDisableBeep();
 void playComboTune();
-void play4ClickDown();
-void play4ClickUp();
 void playBoop();
 void playChirp();
-void playClick();
 void playLongPressLeadUp();
 bool playNextLeadUpNote();  // Play the next note in the lead-up sequence
 void resetLeadUpSequence(); // Reset the lead-up sequence to start from beginning

src/configuration.h

@@ -29,8 +29,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if __has_include("Melopero_RV3028.h")
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("SensorRtcHelper.hpp")
-#include "SensorRtcHelper.hpp"
+#if __has_include("pcf8563.h")
+#include "pcf8563.h"
 #endif
 
 /* Offer chance for variant-specific defines */
@@ -155,10 +155,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 // Default system gain to 0 if not defined
-#ifndef NUM_PA_POINTS
-#define NUM_PA_POINTS 1
-#endif
-
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif
@@ -176,12 +172,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#define SSD1306_ADDRESS_L 0x3C // Addr = 0
-#define SSD1306_ADDRESS_H 0x3D // Addr = 1
-
 #if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
-#define SSD1306_ADDRESS SSD1306_ADDRESS_H
+#define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
+#else
+#define SSD1306_ADDRESS 0x3C
 #endif
 #define ST7567_ADDRESS 0x3F
 
@@ -210,7 +205,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
 #define MAX1704X_ADDR 0x36
-#define QMC6310U_ADDR 0x1C
+#define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
 #define QMC5883L_ADDR 0x0D
 #define HMC5883L_ADDR 0x1E
@@ -219,7 +214,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_4x_ADDR 0x44
 #define SHT31_4x_ADDR_ALT 0x45
-#define PMSA003I_ADDR 0x12
+#define PMSA0031_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
 #define RCWL9620_ADDR 0x57
@@ -473,7 +468,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_AUDIO 1
 #define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
 #define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
-#define MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR 1
 #define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
 #define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
 #define MESHTASTIC_EXCLUDE_PAXCOUNTER 1

src/detect/ScanI2C.cpp

@@ -25,8 +25,8 @@ ScanI2C::FoundDevice ScanI2C::firstScreen() const
 
 ScanI2C::FoundDevice ScanI2C::firstRTC() const
 {
-    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_PCF85063, RTC_RX8130CE};
-    return firstOfOrNONE(4, types);
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_RX8130CE};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
@@ -43,7 +43,7 @@ ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 
 ScanI2C::FoundDevice ScanI2C::firstAQI() const
 {
-    ScanI2C::DeviceType types[] = {PMSA003I, SCD4X};
+    ScanI2C::DeviceType types[] = {PMSA0031, SCD4X};
     return firstOfOrNONE(2, types);
 }
 

src/detect/ScanI2C.h

@@ -14,7 +14,6 @@ class ScanI2C
         SCREEN_ST7567,
         RTC_RV3028,
         RTC_PCF8563,
-        RTC_PCF85063,
         RTC_RX8130CE,
         CARDKB,
         TDECKKB,
@@ -35,12 +34,11 @@ class ScanI2C
         SHT4X,
         SHTC3,
         LPS22HB,
-        QMC6310U,
-        QMC6310N,
+        QMC6310,
         QMI8658,
         QMC5883L,
         HMC5883L,
-        PMSA003I,
+        PMSA0031,
         QMA6100P,
         MPU6050,
         LIS3DH,

src/detect/ScanI2CTwoWire.cpp

@@ -63,16 +63,12 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
         if (i2cBus->available()) {
             r = i2cBus->read();
         }
-        if (r == 0x80) {
-            LOG_INFO("QMC6310N found at address 0x%02X", addr.address);
-            return ScanI2C::DeviceType::QMC6310N;
-        }
         r &= 0x0f;
 
         if (r == 0x08 || r == 0x00) {
             logFoundDevice("SH1106", (uint8_t)addr.address);
             o_probe = SCREEN_SH1106; // SH1106
-        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07 || r == 0x05) {
+        } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
             logFoundDevice("SSD1306", (uint8_t)addr.address);
             o_probe = SCREEN_SSD1306; // SSD1306
         }
@@ -110,7 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value from 0x%x: 0x%x", registerLocation.i2cAddress.address, value);
+    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -179,8 +175,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
         type = NONE;
         if (err == 0) {
             switch (addr.address) {
-            case SSD1306_ADDRESS_H:
-            case SSD1306_ADDRESS_L:
+            case SSD1306_ADDRESS:
                 type = probeOLED(addr);
                 break;
 
@@ -207,10 +202,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(RX8130CE_RTC, RTC_RX8130CE, "RX8130CE", (uint8_t)addr.address)
 #endif
 
-#ifdef PCF85063_RTC
-                SCAN_SIMPLE_CASE(PCF85063_RTC, RTC_PCF85063, "PCF85063", (uint8_t)addr.address)
-#endif
-
             case CARDKB_ADDR:
                 // Do we have the RAK14006 instead?
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
@@ -387,11 +378,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                if (registerValue == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 6) !=
-                           0) { // unique SHT4x serial number (6 bytes inc. CRC)
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else {
@@ -417,7 +408,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
             case LPS22HB_ADDR_ALT:
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB", (uint8_t)addr.address)
-                SCAN_SIMPLE_CASE(QMC6310U_ADDR, QMC6310U, "QMC6310U", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310", (uint8_t)addr.address)
 
             case QMI8658_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
@@ -447,7 +438,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #ifdef HAS_QMA6100P
                 SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P", (uint8_t)addr.address)
 #else
-                SCAN_SIMPLE_CASE(PMSA003I_ADDR, PMSA003I, "PMSA003I", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031", (uint8_t)addr.address)
 #endif
             case BMA423_ADDR: // this can also be LIS3DH_ADDR_ALT
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
@@ -492,7 +483,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
             case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xA0 | 0x12), 1);
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
                     type = TSL2591;
                     logFoundDevice("TSL25911", (uint8_t)addr.address);

src/detect/reClockI2C.h

@@ -1,41 +0,0 @@
-#ifdef CAN_RECLOCK_I2C
-#include "ScanI2CTwoWire.h"
-
-uint32_t reClockI2C(uint32_t desiredClock, TwoWire *i2cBus)
-{
-
-    uint32_t currentClock;
-
-    /* See https://github.com/arduino/Arduino/issues/11457
-      Currently, only ESP32 can getClock()
-      While all cores can setClock()
-      https://github.com/sandeepmistry/arduino-nRF5/blob/master/libraries/Wire/Wire.h#L50
-      https://github.com/earlephilhower/arduino-pico/blob/master/libraries/Wire/src/Wire.h#L60
-      https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/Wire/src/Wire.h#L103
-      For cases when I2C speed is different to the ones defined by sensors (see defines in sensor classes)
-      we need to reclock I2C and set it back to the previous desired speed.
-      Only for cases where we can know OR predefine the speed, we can do this.
-    */
-
-#ifdef ARCH_ESP32
-    currentClock = i2cBus->getClock();
-#elif defined(ARCH_NRF52)
-    // TODO add getClock function or return a predefined clock speed per variant?
-    return 0;
-#elif defined(ARCH_RP2040)
-    // TODO add getClock function or return a predefined clock speed per variant
-    return 0;
-#elif defined(ARCH_STM32WL)
-    // TODO add getClock function or return a predefined clock speed per variant
-    return 0;
-#else
-    return 0;
-#endif
-
-    if (currentClock != desiredClock) {
-        LOG_DEBUG("Changing I2C clock to %u", desiredClock);
-        i2cBus->setClock(desiredClock);
-    }
-    return currentClock;
-}
-#endif

src/gps/GPS.cpp

@@ -896,11 +896,14 @@ void GPS::writePinEN(bool on)
 void GPS::writePinStandby(bool standby)
 {
 #ifdef PIN_GPS_STANDBY // Specifically the standby pin for L76B, L76K and clones
-    bool val;
-    if (standby)
-        val = GPS_STANDBY_ACTIVE;
-    else
-        val = !GPS_STANDBY_ACTIVE;
+
+// Determine the new value for the pin
+// Normally: active HIGH for awake
+#ifdef PIN_GPS_STANDBY_INVERTED
+    bool val = standby;
+#else
+    bool val = !standby;
+#endif
 
     // Write and log
     pinMode(PIN_GPS_STANDBY, OUTPUT);
@@ -931,11 +934,8 @@ void GPS::setPowerPMU(bool on)
             // t-beam v1.2 GNSS power channel
             on ? PMU->enablePowerOutput(XPOWERS_ALDO3) : PMU->disablePowerOutput(XPOWERS_ALDO3);
         } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
-            // t-beam-s3-core GNSS power channel
+            // t-beam-s3-core GNSS  power channel
             on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
-        } else if (HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
-            // t-watch-s3-plus GNSS power channel
-            on ? PMU->enablePowerOutput(XPOWERS_BLDO1) : PMU->disablePowerOutput(XPOWERS_BLDO1);
         }
     } else if (model == XPOWERS_AXP192) {
         // t-beam v1.1 GNSS  power channel

src/gps/GPS.h

@@ -16,11 +16,6 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
-// Allow defining the polarity of the STANDBY output.  default is LOW for standby
-#ifndef GPS_STANDBY_ACTIVE
-#define GPS_STANDBY_ACTIVE LOW
-#endif
-
 static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
 static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
 

src/gps/RTC.cpp

@@ -66,26 +66,26 @@ RTCSetResult readFromRTC()
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
-    } else {
-        LOG_WARN("RTC not found (found address 0x%02X)", rtc_found.address);
     }
-#elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
-#if defined(PCF8563_RTC)
+#elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
-#elif defined(PCF85063_RTC)
-    if (rtc_found.address == PCF85063_RTC) {
-#endif
         uint32_t now = millis();
-        SensorRtcHelper rtc;
+        PCF8563_Class rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
         rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
-        rtc.begin(Wire);
+        rtc.begin();
 #endif
 
-        RTC_DateTime datetime = rtc.getDateTime();
-        tm t = datetime.toUnixTime();
+        auto tc = rtc.getDateTime();
+        tm t;
+        t.tm_year = tc.year - 1900;
+        t.tm_mon = tc.month - 1;
+        t.tm_mday = tc.day;
+        t.tm_hour = tc.hour;
+        t.tm_min = tc.minute;
+        t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
@@ -100,16 +100,14 @@ RTCSetResult readFromRTC()
         }
 #endif
 
-        LOG_DEBUG("Read RTC time from %s getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t.tm_year + 1900,
-                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
+                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         if (currentQuality == RTCQualityNone) {
             timeStartMsec = now;
             zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
-    } else {
-        LOG_WARN("RTC not found (found address 0x%02X)", rtc_found.address);
     }
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
@@ -234,28 +232,20 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
-        } else {
-            LOG_WARN("RTC not found (found address 0x%02X)", rtc_found.address);
         }
-#elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
-#if defined(PCF8563_RTC)
+#elif defined(PCF8563_RTC)
         if (rtc_found.address == PCF8563_RTC) {
-#elif defined(PCF85063_RTC)
-        if (rtc_found.address == PCF85063_RTC) {
-#endif
-            SensorRtcHelper rtc;
+            PCF8563_Class rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
             rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
-            rtc.begin(Wire);
+            rtc.begin();
 #endif
             tm *t = gmtime(&tv->tv_sec);
-            rtc.setDateTime(*t);
-            LOG_DEBUG("%s setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", rtc.getChipName(), t->tm_year + 1900, t->tm_mon + 1,
-                      t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
-        } else {
-            LOG_WARN("RTC not found (found address 0x%02X)", rtc_found.address);
+            rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+            LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+                      t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
@@ -397,7 +387,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
     return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 
-time_t gm_mktime(const struct tm *tm)
+time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
     time_t result = 0;
@@ -413,8 +403,8 @@ time_t gm_mktime(const struct tm *tm)
     days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
 
     // Now, within this tm->year, compute the days *before* this tm->month starts.
-    static const int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                             // tm->tm_mon is 0..11
+    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
 
     // If this is a leap year, and we're past February, add a day:
     if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
@@ -435,7 +425,6 @@ time_t gm_mktime(const struct tm *tm)
 
     return result;
 #else
-    struct tm tmCopy = *tm;
-    return mktime(&tmCopy);
+    return mktime(tm);
 #endif
 }

src/gps/RTC.h

@@ -54,7 +54,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 RTCSetResult readFromRTC();
 
-time_t gm_mktime(const struct tm *tm);
+time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600

src/graphics/EInkDisplay2.cpp

@@ -148,7 +148,7 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE) || defined(TTGO_T_ECHO_PLUS)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 

src/graphics/EInkDisplay2.h

@@ -9,15 +9,6 @@
 #include "GxEPD2Multi.h"
 #endif
 
-// Limit how often we push a full E-Ink refresh. T-Deck Pro needs faster updates for typing.
-#ifndef EINK_FORCE_DISPLAY_THROTTLE_MS
-#if defined(T_DECK_PRO)
-#define EINK_FORCE_DISPLAY_THROTTLE_MS 200
-#else
-#define EINK_FORCE_DISPLAY_THROTTLE_MS 1000
-#endif
-#endif
-
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -51,7 +42,7 @@ class EInkDisplay : public OLEDDisplay
      *
      * @return true if we did draw the screen
      */
-    virtual bool forceDisplay(uint32_t msecLimit = EINK_FORCE_DISPLAY_THROTTLE_MS);
+    virtual bool forceDisplay(uint32_t msecLimit = 1000);
 
     /**
      * Run any code needed to complete an update, after the physical refresh has completed.

src/graphics/Screen.cpp

@@ -312,7 +312,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 
     // Only validate the combined value once
     if (rawRGB > 0 && rawRGB <= 255255255) {
-        LOG_INFO("Setting screen RGB color to user chosen: 0x%06X", rawRGB);
         // Extract each component as a normal int first
         int r = (rawRGB >> 16) & 0xFF;
         int g = (rawRGB >> 8) & 0xFF;
@@ -320,16 +319,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         if (r >= 0 && r <= 255 && g >= 0 && g <= 255 && b >= 0 && b <= 255) {
             TFT_MESH = COLOR565(static_cast<uint8_t>(r), static_cast<uint8_t>(g), static_cast<uint8_t>(b));
         }
-#ifdef TFT_MESH_OVERRIDE
-    } else if (rawRGB == 0) {
-        LOG_INFO("Setting screen RGB color to TFT_MESH_OVERRIDE: 0x%04X", TFT_MESH_OVERRIDE);
-        // Default to TFT_MESH_OVERRIDE if available
-        TFT_MESH = TFT_MESH_OVERRIDE;
-#endif
-    } else {
-        // Default best readable yellow color
-        LOG_INFO("Setting screen RGB color to default: (255,255,128)");
-        TFT_MESH = COLOR565(255, 255, 128);
     }
 
 #if defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
@@ -665,7 +654,7 @@ void Screen::setup()
 
     //  Turn on display and trigger first draw
     handleSetOn(true);
-    graphics::currentResolution = graphics::determineScreenResolution(dispdev->height(), dispdev->width());
+    determineResolution(dispdev->height(), dispdev->width());
     ui->update();
 #ifndef USE_EINK
     ui->update(); // Some SSD1306 clones drop the first draw, so run twice
@@ -825,7 +814,7 @@ int32_t Screen::runOnce()
 #endif
     }
 #endif
-    if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0 && !suppressRebootBanner) {
+    if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
         showSimpleBanner("Rebooting...", 0);
     }
 
@@ -1057,16 +1046,11 @@ void Screen::setFrames(FrameFocus focus)
     indicatorIcons.push_back(icon_mail);
 
 #ifndef USE_EINK
-    if (!hiddenFrames.nodelist_nodes) {
-        fsi.positions.nodelist_nodes = numframes;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicListScreen_Nodes;
+    if (!hiddenFrames.nodelist) {
+        fsi.positions.nodelist = numframes;
+        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicNodeListScreen;
         indicatorIcons.push_back(icon_nodes);
     }
-    if (!hiddenFrames.nodelist_location) {
-        fsi.positions.nodelist_location = numframes;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicListScreen_Location;
-        indicatorIcons.push_back(icon_list);
-    }
 #endif
 
 // Show detailed node views only on E-Ink builds
@@ -1088,13 +1072,11 @@ void Screen::setFrames(FrameFocus focus)
     }
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (!hiddenFrames.nodelist_bearings) {
         fsi.positions.nodelist_bearings = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
         indicatorIcons.push_back(icon_list);
     }
-#endif
     if (!hiddenFrames.gps) {
         fsi.positions.gps = numframes;
         normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
@@ -1256,11 +1238,8 @@ void Screen::setFrameImmediateDraw(FrameCallback *drawFrames)
 void Screen::toggleFrameVisibility(const std::string &frameName)
 {
 #ifndef USE_EINK
-    if (frameName == "nodelist_nodes") {
-        hiddenFrames.nodelist_nodes = !hiddenFrames.nodelist_nodes;
-    }
-    if (frameName == "nodelist_location") {
-        hiddenFrames.nodelist_location = !hiddenFrames.nodelist_location;
+    if (frameName == "nodelist") {
+        hiddenFrames.nodelist = !hiddenFrames.nodelist;
     }
 #endif
 #ifdef USE_EINK
@@ -1275,11 +1254,9 @@ void Screen::toggleFrameVisibility(const std::string &frameName)
     }
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (frameName == "nodelist_bearings") {
         hiddenFrames.nodelist_bearings = !hiddenFrames.nodelist_bearings;
     }
-#endif
     if (frameName == "gps") {
         hiddenFrames.gps = !hiddenFrames.gps;
     }
@@ -1301,10 +1278,8 @@ void Screen::toggleFrameVisibility(const std::string &frameName)
 bool Screen::isFrameHidden(const std::string &frameName) const
 {
 #ifndef USE_EINK
-    if (frameName == "nodelist_nodes")
-        return hiddenFrames.nodelist_nodes;
-    if (frameName == "nodelist_location")
-        return hiddenFrames.nodelist_location;
+    if (frameName == "nodelist")
+        return hiddenFrames.nodelist;
 #endif
 #ifdef USE_EINK
     if (frameName == "nodelist_lastheard")
@@ -1315,10 +1290,8 @@ bool Screen::isFrameHidden(const std::string &frameName) const
         return hiddenFrames.nodelist_distance;
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (frameName == "nodelist_bearings")
         return hiddenFrames.nodelist_bearings;
-#endif
     if (frameName == "gps")
         return hiddenFrames.gps;
 #endif
@@ -1440,15 +1413,10 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         }
         nodeDB->updateGUI = false;
         break;
-    case STATUS_TYPE_POWER: {
-        bool currentUSB = powerStatus->getHasUSB();
-        if (currentUSB != lastPowerUSBState) {
-            lastPowerUSBState = currentUSB;
-            forceDisplay(true);
-        }
+    case STATUS_TYPE_POWER:
+        forceDisplay(true);
         break;
     }
-    }
 
     return 0;
 }
@@ -1555,11 +1523,11 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
                     screen->showSimpleBanner(banner, 3000);
                 } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
                     if (longName && longName[0]) {
-                        if (currentResolution == ScreenResolution::UltraLow) {
-                            strcpy(banner, "New Message");
-                        } else {
-                            snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
-                        }
+#if defined(M5STACK_UNITC6L)
+                        strcpy(banner, "New Message");
+#else
+                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+#endif
                     } else {
                         strcpy(banner, "New Message");
                     }
@@ -1675,25 +1643,6 @@ int Screen::handleInputEvent(const InputEvent *event)
             }
         }
     }
-    // UP/DOWN in node list screens scrolls through node pages
-    if (ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_nodes ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_location ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_lastheard ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings) {
-        if (event->inputEvent == INPUT_BROKER_UP) {
-            graphics::NodeListRenderer::scrollUp();
-            setFastFramerate();
-            return 0;
-        }
-
-        if (event->inputEvent == INPUT_BROKER_DOWN) {
-            graphics::NodeListRenderer::scrollDown();
-            setFastFramerate();
-            return 0;
-        }
-    }
     // Use left or right input from a keyboard to move between frames,
     // so long as a mesh module isn't using these events for some other purpose
     if (showingNormalScreen) {
@@ -1707,26 +1656,6 @@ int Screen::handleInputEvent(const InputEvent *event)
 
         // If no modules are using the input, move between frames
         if (!inputIntercepted) {
-#if defined(INPUTDRIVER_ENCODER_TYPE) && INPUTDRIVER_ENCODER_TYPE == 2
-            bool handledEncoderScroll = false;
-            const bool isTextMessageFrame = (framesetInfo.positions.textMessage != 255 &&
-                                             this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
-                                             !messageStore.getMessages().empty());
-            if (isTextMessageFrame) {
-                if (event->inputEvent == INPUT_BROKER_UP_LONG) {
-                    graphics::MessageRenderer::nudgeScroll(-1);
-                    handledEncoderScroll = true;
-                } else if (event->inputEvent == INPUT_BROKER_DOWN_LONG) {
-                    graphics::MessageRenderer::nudgeScroll(1);
-                    handledEncoderScroll = true;
-                }
-            }
-
-            if (handledEncoderScroll) {
-                setFastFramerate();
-                return 0;
-            }
-#endif
             if (event->inputEvent == INPUT_BROKER_LEFT || event->inputEvent == INPUT_BROKER_ALT_PRESS) {
                 showFrame(FrameDirection::PREVIOUS);
             } else if (event->inputEvent == INPUT_BROKER_RIGHT || event->inputEvent == INPUT_BROKER_USER_PRESS) {
@@ -1757,18 +1686,17 @@ int Screen::handleInputEvent(const InputEvent *event)
                     if (!messageStore.getMessages().empty()) {
                         menuHandler::messageResponseMenu();
                     } else {
-                        if (currentResolution == ScreenResolution::UltraLow) {
-                            menuHandler::textMessageMenu();
-                        } else {
-                            menuHandler::textMessageBaseMenu();
-                        }
+#if defined(M5STACK_UNITC6L)
+                        menuHandler::textMessageMenu();
+#else
+                        menuHandler::textMessageBaseMenu();
+#endif
                     }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
                     menuHandler::favoriteBaseMenu();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_nodes ||
-                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_location ||
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_lastheard ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||

src/graphics/Screen.h

@@ -558,42 +558,6 @@ class Screen : public concurrency::OSThread
         if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5)
             return (uint8_t)0;
 
-#endif
-
-#if defined(OLED_GR)
-
-        switch (last) {
-        case 0xC3: {
-            SKIPREST = false;
-            return (uint8_t)(ch | 0xC0);
-        }
-        // Map UTF-8 Greek chars to Windows-1253 (CP-1253) ASCII codes
-        case 0xCE: {
-            SKIPREST = false;
-            // Uppercase Greek: Α-Ρ (U+0391-U+03A1) -> CP-1253 193-209
-            if (ch >= 145 && ch <= 161)
-                return (uint8_t)(ch + 48);
-            // Uppercase Greek: Σ-Ω (U+03A3-U+03A9) -> CP-1253 211-217
-            else if (ch >= 163 && ch <= 169)
-                return (uint8_t)(ch + 48);
-            // Lowercase Greek: α-ρ (U+03B1-U+03C1) -> CP-1253 225-241
-            else if (ch >= 177 && ch <= 193)
-                return (uint8_t)(ch + 48);
-            break;
-        }
-        case 0xCF: {
-            SKIPREST = false;
-            // Lowercase Greek: ς-ω (U+03C2-U+03C9) -> CP-1253 242-249
-            if (ch >= 130 && ch <= 137)
-                return (uint8_t)(ch + 112);
-            break;
-        }
-        }
-
-        // We want to strip out prefix chars for two-byte Greek char formats
-        if (ch == 0xC2 || ch == 0xC3 || ch == 0xCE || ch == 0xCF)
-            return (uint8_t)0;
-
 #endif
 
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
@@ -690,8 +654,7 @@ class Screen : public concurrency::OSThread
             uint8_t gps = 255;
             uint8_t home = 255;
             uint8_t textMessage = 255;
-            uint8_t nodelist_nodes = 255;
-            uint8_t nodelist_location = 255;
+            uint8_t nodelist = 255;
             uint8_t nodelist_lastheard = 255;
             uint8_t nodelist_hopsignal = 255;
             uint8_t nodelist_distance = 255;
@@ -714,8 +677,7 @@ class Screen : public concurrency::OSThread
         bool home = false;
         bool clock = false;
 #ifndef USE_EINK
-        bool nodelist_nodes = false;
-        bool nodelist_location = false;
+        bool nodelist = false;
 #endif
 #ifdef USE_EINK
         bool nodelist_lastheard = false;
@@ -723,9 +685,7 @@ class Screen : public concurrency::OSThread
         bool nodelist_distance = false;
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
         bool nodelist_bearings = false;
-#endif
         bool gps = false;
 #endif
         bool lora = false;
@@ -751,8 +711,6 @@ class Screen : public concurrency::OSThread
     // Whether we are showing the regular screen (as opposed to booth screen or
     // Bluetooth PIN screen)
     bool showingNormalScreen = false;
-    /// Track USB power state to only wake screen on actual power state changes
-    bool lastPowerUSBState = false;
 
     // Implementation to Adjust Brightness
     uint8_t brightness = BRIGHTNESS_DEFAULT; // H = 254, MH = 192, ML = 130 L = 103

src/graphics/ScreenFonts.h

@@ -16,17 +16,10 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef OLED_GR
-#include "graphics/fonts/OLEDDisplayFontsGR.h"
-#endif
-
 #if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
-#ifdef OLED_GR
-#define FONT_SMALL_LOCAL ArialMT_Plain_10_GR // Height: 13
-#else
 #ifdef OLED_PL
 #define FONT_SMALL_LOCAL ArialMT_Plain_10_PL
 #else
@@ -44,10 +37,6 @@
 #endif
 #endif
 #endif
-#endif
-#ifdef OLED_GR
-#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_GR // Height: 19
-#else
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
@@ -65,10 +54,6 @@
 #endif
 #endif
 #endif
-#endif
-#ifdef OLED_GR
-#define FONT_LARGE_LOCAL ArialMT_Plain_24_GR // Height: 28
-#else
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
@@ -86,7 +71,6 @@
 #endif
 #endif
 #endif
-#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \

src/graphics/SharedUIDisplay.cpp

@@ -8,7 +8,6 @@
 #include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
-#include "modules/ExternalNotificationModule.h"
 #include "power.h"
 #include <OLEDDisplay.h>
 #include <graphics/images.h>
@@ -16,30 +15,21 @@
 namespace graphics
 {
 
-ScreenResolution determineScreenResolution(int16_t screenheight, int16_t screenwidth)
+void determineResolution(int16_t screenheight, int16_t screenwidth)
 {
 
 #ifdef FORCE_LOW_RES
-    return ScreenResolution::Low;
-#else
-    // Unit C6L and other ultra low res screens
-    if (screenwidth <= 64 || screenheight <= 48) {
-        return ScreenResolution::UltraLow;
-    }
-
-    // Standard OLED screens
-    if (screenwidth > 128 && screenheight <= 64) {
-        return ScreenResolution::Low;
-    }
-
-    // High Resolutions screens like T114, TDeck, TLora Pager, etc
-    if (screenwidth > 128) {
-        return ScreenResolution::High;
-    }
-
-    // Default to low resolution
-    return ScreenResolution::Low;
+    isHighResolution = false;
+    return;
 #endif
+
+    if (screenwidth > 128) {
+        isHighResolution = true;
+    }
+
+    if (screenwidth > 128 && screenheight <= 64) {
+        isHighResolution = false;
+    }
 }
 
 void decomposeTime(uint32_t rtc_sec, int &hour, int &minute, int &second)
@@ -57,7 +47,8 @@ void decomposeTime(uint32_t rtc_sec, int &hour, int &minute, int &second)
 
 // === Shared External State ===
 bool hasUnreadMessage = false;
-ScreenResolution currentResolution = ScreenResolution::Low;
+bool isMuted = false;
+bool isHighResolution = false;
 
 // === Internal State ===
 bool isBoltVisibleShared = true;
@@ -113,7 +104,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             display->setColor(BLACK);
             display->fillRect(0, 0, screenW, highlightHeight + 2);
             display->setColor(WHITE);
-            if (currentResolution == ScreenResolution::High) {
+            if (isHighResolution) {
                 display->drawLine(0, 20, screenW, 20);
             } else {
                 display->drawLine(0, 14, screenW, 14);
@@ -151,7 +142,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     }
 #endif
 
-    bool useHorizontalBattery = (currentResolution == ScreenResolution::High && screenW >= screenH);
+    bool useHorizontalBattery = (isHighResolution && screenW >= screenH);
     const int textY = y + (highlightHeight - FONT_HEIGHT_SMALL) / 2;
 
     int batteryX = 1;
@@ -161,7 +152,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
         batteryX += 1;
         batteryY += 2;
-        if (currentResolution == ScreenResolution::High) {
+        if (isHighResolution) {
             display->drawXbm(batteryX, batteryY, 19, 12, imgUSB_HighResolution);
             batteryX += 20; // Icon + 1 pixel
         } else {
@@ -231,7 +222,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
         UIRenderer::formatDateTime(datetimeStr, sizeof(datetimeStr), rtc_sec, display, false);
         char dateLine[40];
 
-        if (currentResolution == ScreenResolution::High) {
+        if (isHighResolution) {
             snprintf(dateLine, sizeof(dateLine), "%s", datetimeStr);
         } else {
             if (hasUnreadMessage) {
@@ -306,8 +297,8 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 }
                 display->drawXbm(iconX, iconY, mail_width, mail_height, mail);
             }
-        } else if (externalNotificationModule->getMute()) {
-            if (currentResolution == ScreenResolution::High) {
+        } else if (isMuted) {
+            if (isHighResolution) {
                 int iconX = iconRightEdge - mute_symbol_big_width;
                 int iconY = textY + (FONT_HEIGHT_SMALL - mute_symbol_big_height) / 2;
 
@@ -325,7 +316,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 int iconX = iconRightEdge - mute_symbol_width;
                 int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
 
-                if (isInverted && !force_no_invert) {
+                if (isInverted) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, mute_symbol_width + 2, mute_symbol_height + 2);
                     display->setColor(BLACK);
@@ -383,8 +374,8 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
                 display->drawXbm(iconX, iconY, mail_width, mail_height, mail);
             }
-        } else if (externalNotificationModule->getMute()) {
-            if (currentResolution == ScreenResolution::High) {
+        } else if (isMuted) {
+            if (isHighResolution) {
                 int iconX = iconRightEdge - mute_symbol_big_width;
                 int iconY = textY + (FONT_HEIGHT_SMALL - mute_symbol_big_height) / 2;
                 display->drawXbm(iconX, iconY, mute_symbol_big_width, mute_symbol_big_height, mute_symbol_big);
@@ -403,7 +394,7 @@ const int *getTextPositions(OLEDDisplay *display)
 {
     static int textPositions[7]; // Static array that persists beyond function scope
 
-    if (currentResolution == ScreenResolution::High) {
+    if (isHighResolution) {
         textPositions[0] = textZeroLine;
         textPositions[1] = textFirstLine_medium;
         textPositions[2] = textSecondLine_medium;
@@ -436,12 +427,12 @@ void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
     }
 
     if (drawConnectionState) {
-        const int scale = (currentResolution == ScreenResolution::High) ? 2 : 1;
+        const int scale = isHighResolution ? 2 : 1;
         display->setColor(BLACK);
         display->fillRect(0, SCREEN_HEIGHT - (1 * scale) - (connection_icon_height * scale), (connection_icon_width * scale),
                           (connection_icon_height * scale) + (2 * scale));
         display->setColor(WHITE);
-        if (currentResolution == ScreenResolution::High) {
+        if (isHighResolution) {
             const int bytesPerRow = (connection_icon_width + 7) / 8;
             int iconX = 0;
             int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
@@ -470,49 +461,18 @@ bool isAllowedPunctuation(char c)
     return allowed.find(c) != std::string::npos;
 }
 
-static void replaceAll(std::string &s, const std::string &from, const std::string &to)
-{
-    if (from.empty())
-        return;
-    size_t pos = 0;
-    while ((pos = s.find(from, pos)) != std::string::npos) {
-        s.replace(pos, from.size(), to);
-        pos += to.size();
-    }
-}
-
 std::string sanitizeString(const std::string &input)
 {
     std::string output;
     bool inReplacement = false;
 
-    // Make a mutable copy so we can normalize UTF-8 “smart punctuation” into ASCII first.
-    std::string s = input;
-
-    // Curly single quotes: ‘ ’
-    replaceAll(s, "\xE2\x80\x98", "'"); // U+2018
-    replaceAll(s, "\xE2\x80\x99", "'"); // U+2019
-
-    // Curly double quotes: “ ”
-    replaceAll(s, "\xE2\x80\x9C", "\""); // U+201C
-    replaceAll(s, "\xE2\x80\x9D", "\""); // U+201D
-
-    // En dash / Em dash: – —
-    replaceAll(s, "\xE2\x80\x93", "-"); // U+2013
-    replaceAll(s, "\xE2\x80\x94", "-"); // U+2014
-
-    // Non-breaking space
-    replaceAll(s, "\xC2\xA0", " "); // U+00A0
-
-    // Now do your original sanitize pass over the normalized string.
-    for (unsigned char uc : s) {
-        char c = static_cast<char>(uc);
-        if (std::isalnum(uc) || isAllowedPunctuation(c)) {
+    for (char c : input) {
+        if (std::isalnum(static_cast<unsigned char>(c)) || isAllowedPunctuation(c)) {
             output += c;
             inReplacement = false;
         } else {
             if (!inReplacement) {
-                output += static_cast<char>(0xBF); // ISO-8859-1 for inverted question mark
+                output += 0xbf; // ISO-8859-1 for inverted question mark
                 inReplacement = true;
             }
         }

src/graphics/SharedUIDisplay.h

@@ -41,9 +41,9 @@ namespace graphics
 
 // Shared state (declare inside namespace)
 extern bool hasUnreadMessage;
-enum class ScreenResolution : uint8_t { UltraLow = 0, Low = 1, High = 2 };
-extern ScreenResolution currentResolution;
-ScreenResolution determineScreenResolution(int16_t screenheight, int16_t screenwidth);
+extern bool isMuted;
+extern bool isHighResolution;
+void determineResolution(int16_t screenheight, int16_t screenwidth);
 
 void decomposeTime(uint32_t rtc_sec, int &hour, int &minute, int &second);