Manual bump metainfo version (#7049)

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/pull_request_template.md

@@ -1,6 +1,7 @@
 ## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -15,12 +16,12 @@
 - If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
-
 ## 🤝 Attestations
+
 - [ ] I have tested that my proposed changes behave as described.
 - [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
   - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
+  - [ ] LilyGo T-Deck
   - [ ] LilyGo T-Beam
   - [ ] RAK WisBlock 4631
   - [ ] Seeed Studio T-1000E tracker card

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.435
-    - renovate@40.34.4
+    - checkov@3.2.440
+    - renovate@40.51.0
     - prettier@3.5.3
-    - trufflehog@3.88.34
+    - trufflehog@3.89.1
     - yamllint@1.37.1
     - bandit@1.8.3
-    - trivy@0.62.1
+    - trivy@0.63.0
     - taplo@0.9.3
-    - ruff@0.11.11
+    - ruff@0.11.13
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
@@ -28,7 +28,7 @@ lint:
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.26.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

alpine.Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
+FROM python:3.13-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
@@ -27,7 +27,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

arch/esp32/esp32.ini

@@ -4,7 +4,7 @@ extends = arduino_base
 custom_esp32_kind = esp32
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.10.0
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/622341c6de8a239704318b10c3dbb00c21a3eab3.zip
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.1.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/device-install.bat

@@ -12,6 +12,7 @@ SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
 SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
@@ -24,7 +25,7 @@ GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web) [--1200bps-reset]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
@@ -35,13 +36,16 @@ ECHO     -P python        Specify alternate python interpreter to use to invoke
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
 ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
 ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -58,10 +62,13 @@ IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
 IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -95,6 +102,9 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -133,6 +143,12 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 @REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
 IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
@@ -254,6 +270,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-install.sh

@@ -2,6 +2,7 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
+BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
@@ -32,47 +33,50 @@ BIGDB_16MB=(
 	"ESP32-S3-Pico"
 	"m5stack-cores3"
 	"station-g2"
-	"t-eth-elite"
-	"t-watch-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
-	"s3"
-	"-v3"
-	"t-deck"
-	"wireless-paper"
-	"wireless-tracker"
-	"station-g2"
-	"unphone"
-	"t-eth-elite"
- 	"mesh-tab"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"seeed-sensecap-indicator"
-	"heltec_capsule_sensor_v3"
-	"vision-master"
-	"icarus"
-	"tracksenger"
-	"elecrow-adv"
+    "s3"
+    "-v3"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
 )
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
-	exit 1
+    echo "Error: esptool not found"
+    exit 1
 fi
 
 set -e
 
 # Usage info
 show_help() {
-	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
+    cat <<EOF
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web] [--1200bps-reset]
 Flash image file to device, but first erasing and writing system information.
 
     -h               Display this help and exit.
@@ -80,137 +84,146 @@ Flash image file to device, but first erasing and writing system information.
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
 # Parse arguments using a single while loop
 while [ $# -gt 0 ]; do
-	case "$1" in
-	-h | --help)
-		show_help
-		exit 0
-		;;
-	-p)
-		ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
-		shift
-		;;
-	-P)
-		PYTHON="$2"
-		shift
-		;;
-	-f)
-		FILENAME="$2"
-		shift
-		;;
-	--web)
-		WEB_APP=true
-		;;
-	--) # Stop parsing options
-		shift
-		break
-		;;
-	*)
-		echo "Unknown argument: $1" >&2
-		exit 1
-		;;
-	esac
-	shift # Move to the next argument
+    case "$1" in
+    -h | --help)
+        show_help
+        exit 0
+        ;;
+    -p)
+        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
+        shift
+        ;;
+    -P)
+        PYTHON="$2"
+        shift
+        ;;
+    -f)
+        FILENAME="$2"
+        shift
+        ;;
+    --web)
+        WEB_APP=true
+        ;;
+    --1200bps-reset)
+		    BPS_RESET=true
+		    ;;
+    --) # Stop parsing options
+        shift
+        break
+        ;;
+    *)
+        echo "Unknown argument: $1" >&2
+        exit 1
+        ;;
+    esac
+    shift # Move to the next argument
 done
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-	FILENAME=$1
-	shift
+if [[ $BPS_RESET == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	exit 0
+fi
+
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
+    shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
   echo "Filename must be a firmware-* file."
   exit 1
 fi
 
 # Check if FILENAME contains "-tft-" and prevent web/mui comingling.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
-	TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+    if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
+        echo "Cannot enable WebUI (--web) and MUI."
+        exit 1
+    fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
 BASENAME="${FILENAME/firmware-/}"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
-	OFFSET=0x300000
+    # Default littlefs* offset (--web).
+    OFFSET=0x300000
 
-	# Default OTA Offset
-	OTA_OFFSET=0x260000
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
 
-	# littlefs* offset for BigDB 8mb and OTA OFFSET.
-	for variant in "${BIGDB_8MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0x670000
-			OTA_OFFSET=0x340000
-		fi
-	done
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
+        fi
+    done
 
-	# littlefs* offset for BigDB 16mb and OTA OFFSET.
-	for variant in "${BIGDB_16MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0xc90000
-			OTA_OFFSET=0x650000
-		fi
-	done
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
 
-	# Account for S3 board's different OTA partition
-	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
-	for variant in "${S3_VARIANTS[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			MCU="esp32s3"
-		fi
-	done
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
 
-	if [ "$MCU" != "esp32s3" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
-		else
-			OTAFILE=bleota-c3.bin
-		fi
-	else
-		OTAFILE=bleota-s3.bin
-	fi
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
+    else
+        OTAFILE=bleota-s3.bin
+    fi
 
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
+    # Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
+    if [ "$WEB_APP" = true ]; then
+        SPIFFSFILE=littlefswebui-${BASENAME}
+    else
+        SPIFFSFILE=littlefs-${BASENAME}
+    fi
 
-	if [[ ! -f $FILENAME ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $OTAFILE ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $SPIFFSFILE ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
-	fi
+    if [[ ! -f "$FILENAME" ]]; then
+        echo "Error: file ${FILENAME} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$OTAFILE" ]]; then
+        echo "Error: file ${OTAFILE} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$SPIFFSFILE" ]]; then
+        echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
+        exit 1
+    fi
 
-	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/device-update.bat

@@ -8,12 +8,13 @@ SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but leave existing system intact.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
@@ -23,12 +24,15 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -44,10 +48,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -77,6 +84,9 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -115,6 +125,12 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
 CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
@@ -135,6 +151,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-update.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,14 +18,15 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
-    
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
+
 EOF
 }
 
@@ -36,13 +38,16 @@ while getopts ":hp:P:f:" opt; do
             exit 0
             ;;
         p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
-	        ;;
+            ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}
             ;;
+	    --change-mode)
+            CHANGE_MODE=true
+            ;;
         *)
- 	        echo "Invalid flag."
+            echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -50,17 +55,22 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
+if [[ $CHANGE_MODE == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    echo "Trying to flash update ${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/generate_ci_matrix.py

@@ -27,7 +27,7 @@ for subdir, dirs, files in os.walk(rootdir):
                 if c.startswith("env:"):
                     section = config[c].name[4:]
                     if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
                             if "board_level" in config[config[c].name]:
                                 if (
                                     config[config[c].name]["board_level"] == "extra"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,12 @@
   </screenshots>
 
   <releases>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
     <release version="2.6.10" date="2025-05-25">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
     </release>

boards/ThinkNode-M1.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
   "vendor": "ELECROW"
 }

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/seeed_xiao_nrf52840_kit.json

@@ -7,9 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
+    "hwids": [["0x2886", "0x0166"]],
     "usb_product": "XIAO-BOOT",
     "mcu": "nrf52840",
     "variant": "seeed_xiao_nrf52840_kit",

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
+meshtasticd (2.6.11.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -16,4 +16,7 @@ meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Sun, 25 May 2025 20:46:49 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Mon, 02 Jun 2025 20:00:55 +0000

platformio.ini

@@ -108,7 +108,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37e2fb84a8d1b7d8cc1e2ed00d34cfb1f284bd59.zip
+	https://github.com/meshtastic/device-ui/archive/301f11e584cbeccf08af923bb2a0e02b669bda0b.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/AmbientLightingThread.h

@@ -59,82 +59,82 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
         LOG_DEBUG("AmbientLighting init");
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
 #ifdef HAS_LP5562
-        } else if (_type == ScanI2C::LP5562) {
-            rgbw.begin();
+            if (_type == ScanI2C::LP5562) {
+                rgbw.begin();
 #endif
 #ifdef RGBLED_RED
-            pinMode(RGBLED_RED, OUTPUT);
-            pinMode(RGBLED_GREEN, OUTPUT);
-            pinMode(RGBLED_BLUE, OUTPUT);
+                pinMode(RGBLED_RED, OUTPUT);
+                pinMode(RGBLED_GREEN, OUTPUT);
+                pinMode(RGBLED_BLUE, OUTPUT);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.begin(); // Initialise the pixel(s)
-            pixels.clear(); // Set all pixel colors to 'off'
-            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+                pixels.begin(); // Initialise the pixel(s)
+                pixels.clear(); // Set all pixel colors to 'off'
+                pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-            setLighting();
+                setLighting();
 #endif
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
-        }
+            }
 #endif
-    }
+        }
 
-  protected:
-    int32_t runOnce() override
-    {
+      protected:
+        int32_t runOnce() override
+        {
 #ifdef HAS_RGB_LED
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
-        if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
+            if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-            setLighting();
-            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+                setLighting();
+                return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
 #if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            }
+#endif
+#endif
+            return disable();
         }
-#endif
-#endif
-        return disable();
-    }
 
-    // When shutdown() is issued, setLightingOff will be called.
-    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
-        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+        // When shutdown() is issued, setLightingOff will be called.
+        CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+            CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
 
-  private:
-    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+      private:
+        ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
-    // Turn RGB lighting off, is used in junction to shutdown()
-    int setLightingOff(void *unused)
-    {
+        // Turn RGB lighting off, is used in junction to shutdown()
+        int setLightingOff(void *unused)
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(0);
-        rgb.setRed(0);
-        rgb.setGreen(0);
-        rgb.setBlue(0);
-        LOG_INFO("OFF: NCP5623 Ambient lighting");
+            rgb.setCurrent(0);
+            rgb.setRed(0);
+            rgb.setGreen(0);
+            rgb.setBlue(0);
+            LOG_INFO("OFF: NCP5623 Ambient lighting");
 #endif
 #ifdef HAS_LP5562
-        rgbw.setCurrent(0);
-        rgbw.setRed(0);
-        rgbw.setGreen(0);
-        rgbw.setBlue(0);
-        rgbw.setWhite(0);
-        LOG_INFO("OFF: LP5562 Ambient lighting");
+            rgbw.setCurrent(0);
+            rgbw.setRed(0);
+            rgbw.setGreen(0);
+            rgbw.setBlue(0);
+            rgbw.setWhite(0);
+            LOG_INFO("OFF: LP5562 Ambient lighting");
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.clear();
-        pixels.show();
-        LOG_INFO("OFF: NeoPixel Ambient lighting");
+            pixels.clear();
+            pixels.show();
+            LOG_INFO("OFF: NeoPixel Ambient lighting");
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - 0);
-        analogWrite(RGBLED_GREEN, 255 - 0);
-        analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("OFF: Ambient light RGB Common Anode");
+            analogWrite(RGBLED_RED, 255 - 0);
+            analogWrite(RGBLED_GREEN, 255 - 0);
+            analogWrite(RGBLED_BLUE, 255 - 0);
+            LOG_INFO("OFF: Ambient light RGB Common Anode");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
@@ -142,56 +142,57 @@ class AmbientLightingThread : public concurrency::OSThread
         LOG_INFO("OFF: Ambient light RGB Common Cathode");
 #endif
 #ifdef UNPHONE
-        unphone.rgb(0, 0, 0);
-        LOG_INFO("OFF: unPhone Ambient lighting");
+            unphone.rgb(0, 0, 0);
+            LOG_INFO("OFF: unPhone Ambient lighting");
 #endif
-        return 0;
-    }
+            return 0;
+        }
 
-    void setLighting()
-    {
+        void setLighting()
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(moduleConfig.ambient_lighting.current);
-        rgb.setRed(moduleConfig.ambient_lighting.red);
-        rgb.setGreen(moduleConfig.ambient_lighting.green);
-        rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_LP5562
-        rgbw.setCurrent(moduleConfig.ambient_lighting.current);
-        rgbw.setRed(moduleConfig.ambient_lighting.red);
-        rgbw.setGreen(moduleConfig.ambient_lighting.green);
-        rgbw.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                                 moduleConfig.ambient_lighting.blue),
-                    0, NEOPIXEL_COUNT);
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                     moduleConfig.ambient_lighting.blue),
+                        0, NEOPIXEL_COUNT);
 
 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
 #ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
-        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+            pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
-        pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+            pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
 #endif
 #endif
-        pixels.show();
-        LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                  moduleConfig.ambient_lighting.blue);
+            pixels.show();
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
-        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
-        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
@@ -200,11 +201,12 @@ class AmbientLightingThread : public concurrency::OSThread
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                        moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
-    }
-};
+        }
+    };
 
 } // namespace concurrency

src/BluetoothStatus.h

@@ -88,10 +88,16 @@ class BluetoothStatus : public Status
                 break;
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, HIGH);
+#endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, LOW);
+#endif
                 break;
             }
         }
@@ -102,4 +108,4 @@ class BluetoothStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::BluetoothStatus *bluetoothStatus;
+extern meshtastic::BluetoothStatus *bluetoothStatus;

src/concurrency/Lock.cpp

@@ -9,17 +9,23 @@ namespace concurrency
 Lock::Lock() : handle(xSemaphoreCreateBinary())
 {
     assert(handle);
-    assert(xSemaphoreGive(handle));
+    if (xSemaphoreGive(handle) == false) {
+        abort();
+    }
 }
 
 void Lock::lock()
 {
-    assert(xSemaphoreTake(handle, portMAX_DELAY));
+    if (xSemaphoreTake(handle, portMAX_DELAY) == false) {
+        abort();
+    }
 }
 
 void Lock::unlock()
 {
-    assert(xSemaphoreGive(handle));
+    if (xSemaphoreGive(handle) == false) {
+        abort();
+    }
 }
 #else
 Lock::Lock() {}

src/graphics/TFTDisplay.cpp

@@ -467,18 +467,27 @@ class LGFX : public lgfx::LGFX_Device
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
-
-            cfg.memory_width = TFT_WIDTH;                 // Maximum width supported by the driver IC
-            cfg.memory_height = TFT_HEIGHT;               // Maximum height supported by the driver IC
-            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
-            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
-            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
-            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
-            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
+#if defined(T_WATCH_S3)
+            cfg.panel_width = 240;
+            cfg.panel_height = 240;
+            cfg.memory_width = 240;
+            cfg.memory_height = 320;
+            cfg.offset_x = 0;
+            cfg.offset_y = 0;                             // No vertical shift needed — panel is top-aligned
+            cfg.offset_rotation = 2;                      // Rotate 180° to correct upside-down layout
+#else
+            cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
+            cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
+            cfg.panel_width = TFT_WIDTH;               // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;             // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;               // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;               // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
+#endif
 #ifdef TFT_DUMMY_READ_PIXELS
             cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
 #else
-            cfg.dummy_read_pixel = 9; // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_pixel = 9;                  // Number of bits for dummy read before pixel readout
 #endif
             cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
             cfg.readable = true;                          // Set to true if data can be read

src/graphics/niche/Drivers/EInk/DEPG0213BNS800.h

@@ -5,7 +5,7 @@ E-Ink display driver
     - Manufacturer: DKE
     - Size: 2.13 inch
     - Resolution: 122px x 250px
-    - Flex connector marking: FPC-7528B
+    - Flex connector marking (not a unique identifier): FPC-7528B
 
     Note: this is from an older generation of DKE panels, which still used Solomon Systech controller ICs.
     DKE's website suggests that the latest DEPG0213BN displays may use Fitipower controllers instead.

src/graphics/niche/Drivers/EInk/DEPG0290BNS800.h

@@ -5,7 +5,7 @@ E-Ink display driver
     - Manufacturer: DKE
     - Size: 2.9 inch
     - Resolution: 128px x 296px
-    - Flex connector marking: FPC-7519 rev.b
+    - Flex connector marking (not a unique identifier): FPC-7519 rev.b
 
 */
 

src/graphics/niche/Drivers/EInk/GDEY0154D67.cpp

@@ -9,12 +9,9 @@ void GDEY0154D67::configScanning()
 {
     // "Driver output control"
     sendCommand(0x01);
-    sendData(0xC7);
+    sendData(0xC7); // Scan until gate 199 (200px vertical res.)
     sendData(0x00);
     sendData(0x00);
-
-    // To-do: delete this method?
-    // Values set here might be redundant: C7, 00, 00 seems to be default
 }
 
 // Specify which information is used to control the sequence of voltages applied to move the pixels
@@ -52,10 +49,10 @@ void GDEY0154D67::detachFromUpdate()
 {
     switch (updateType) {
     case FAST:
-        return beginPolling(50, 500); // At least 500ms for fast refresh
+        return beginPolling(50, 300); // At least 300ms for fast refresh
     case FULL:
     default:
-        return beginPolling(100, 2000); // At least 2 seconds for full refresh
+        return beginPolling(100, 1500); // At least 1.5 seconds for full refresh
     }
 }
 #endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/GDEY0154D67.h

@@ -5,7 +5,7 @@ E-Ink display driver
     - Manufacturer: Goodisplay
     - Size: 1.54 inch
     - Resolution: 200px x 200px
-    - Flex connector marking: FPC-B001
+    - Flex connector marking (not a unique identifier): FPC-B001
 
 */
 
@@ -31,9 +31,9 @@ class GDEY0154D67 : public SSD16XX
     GDEY0154D67() : SSD16XX(width, height, supported) {}
 
   protected:
-    virtual void configScanning() override;
-    virtual void configWaveform() override;
-    virtual void configUpdateSequence() override;
+    void configScanning() override;
+    void configWaveform() override;
+    void configUpdateSequence() override;
     void detachFromUpdate() override;
 };
 

src/graphics/niche/Drivers/EInk/GDEY0213B74.cpp

@@ -12,9 +12,6 @@ void GDEY0213B74::configScanning()
     sendData(0xF9);
     sendData(0x00);
     sendData(0x00);
-
-    // To-do: delete this method?
-    // Values set here might be redundant: F9, 00, 00 seems to be default
 }
 
 // Specify which information is used to control the sequence of voltages applied to move the pixels

src/graphics/niche/Drivers/EInk/GDEY0213B74.h

@@ -5,7 +5,9 @@ E-Ink display driver
     - Manufacturer: Goodisplay
     - Size: 2.13 inch
     - Resolution: 250px x 122px
-    - Flex connector marking: FPC-A002
+    - Flex connector marking (not a unique identifier):
+      - FPC-A002
+      - FPC-A005 20.06.15 TRX
 
 */
 

src/graphics/niche/Drivers/EInk/HINK_E0213A289.cpp

@@ -0,0 +1,61 @@
+#include "./HINK_E0213A289.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+using namespace NicheGraphics::Drivers;
+
+// Map the display controller IC's output to the connected panel
+void HINK_E0213A289::configScanning()
+{
+    // "Driver output control"
+    // Scan gates from 0 to 249 (vertical resolution 250px)
+    sendCommand(0x01);
+    sendData(0xF9); // Maximum gate # (249, bits 0-7)
+    sendData(0x00); // Maximum gate # (bit 8)
+    sendData(0x00); // (Do not invert scanning order)
+}
+
+// Specify which information is used to control the sequence of voltages applied to move the pixels
+// - For this display, configUpdateSequence() specifies that a suitable LUT will be loaded from
+//   the controller IC's OTP memory, when the update procedure begins.
+void HINK_E0213A289::configWaveform()
+{
+    sendCommand(0x3C); // Border waveform:
+    sendData(0x05);    // Screen border should follow LUT1 waveform (actively drive pixels white)
+
+    sendCommand(0x18); // Temperature sensor:
+    sendData(0x80);    // Use internal temperature sensor to select an appropriate refresh waveform
+}
+
+// Describes the sequence of events performed by the displays controller IC during a refresh
+// Includes "power up", "load settings from memory", "update the pixels", etc
+void HINK_E0213A289::configUpdateSequence()
+{
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xFF);    // Will load LUT from OTP memory, Display mode 2 "differential refresh"
+        break;
+
+    case FULL:
+    default:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xF7);    // Will load LUT from OTP memory
+        break;
+    }
+}
+
+// Once the refresh operation has been started,
+// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
+// Only used when refresh is "async"
+void HINK_E0213A289::detachFromUpdate()
+{
+    switch (updateType) {
+    case FAST:
+        return beginPolling(50, 500); // At least 500ms for fast refresh
+    case FULL:
+    default:
+        return beginPolling(100, 1000); // At least 1 second for full refresh (quick; display only blinks pixels once)
+    }
+}
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/HINK_E0213A289.h

@@ -0,0 +1,44 @@
+/*
+
+E-Ink display driver
+    - HINK_E0213A289
+    - Manufacturer: Holitech
+    - Size: 2.13 inch
+    - Resolution: 122px x 250px
+    - Flex connector label (not a unique identifier): FPC-7528B
+
+    Note: as of Feb. 2025, these panels are used for "WeActStudio 2.13in B&W" display modules
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./SSD16XX.h"
+
+namespace NicheGraphics::Drivers
+{
+class HINK_E0213A289 : public SSD16XX
+{
+    // Display properties
+  private:
+    static constexpr uint32_t width = 122;
+    static constexpr uint32_t height = 250;
+    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
+
+  public:
+    HINK_E0213A289() : SSD16XX(width, height, supported, 1) {}
+
+  protected:
+    void configScanning() override;
+    void configWaveform() override;
+    void configUpdateSequence() override;
+    void detachFromUpdate() override;
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/HINK_E042A87.h

@@ -5,7 +5,7 @@ E-Ink display driver
     - Manufacturer: Holitech
     - Size: 4.2 inch
     - Resolution: 400px x 300px
-    - Flex connector marking: HINK-E042A07-FPC-A1
+    - Flex connector marking (not a unique identifier): HINK-E042A07-FPC-A1
     - Silver sticker with QR code, marked: HE042A87
 
     Note: as of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules

src/graphics/niche/Drivers/EInk/LCMEN2R13ECC1.h

@@ -5,7 +5,6 @@ E-Ink display driver
     - Manufacturer: WISEVAST
     - Size: 2.13 inch
     - Resolution: 122px x 255px
-    - Flex connector marking: Soldering connector, no connector is needed
 
 */
 

src/graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h

@@ -5,7 +5,7 @@ E-Ink display driver
     - Manufacturer: Wisevast
     - Size: 2.13 inch
     - Resolution: 122px x 250px
-    - Flex connector marking: HINK-E0213A162-FPC-A0 (Hidden, printed on back-side)
+    - Flex connector marking (not a unique identifier): HINK-E0213A162-FPC-A0 (Hidden, printed on back-side)
 
 Note: this display uses an uncommon controller IC, Fitipower JD79656.
 It is implemented as a "one-off", directly inheriting the EInk base class, unlike SSD16XX displays.

src/graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.cpp

@@ -0,0 +1,59 @@
+#include "./ZJY128296_029EAAMFGN.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+using namespace NicheGraphics::Drivers;
+
+// Map the display controller IC's output to the connected panel
+void ZJY128296_029EAAMFGN::configScanning()
+{
+    // "Driver output control"
+    // Scan gates from 0 to 295 (vertical resolution 296px)
+    sendCommand(0x01);
+    sendData(0x27); // Number of gates (295, bits 0-7)
+    sendData(0x01); // Number of gates (295, bit 8)
+    sendData(0x00); // (Do not invert scanning order)
+}
+
+// Specify which information is used to control the sequence of voltages applied to move the pixels
+// - For this display, configUpdateSequence() specifies that a suitable LUT will be loaded from
+//   the controller IC's OTP memory, when the update procedure begins.
+void ZJY128296_029EAAMFGN::configWaveform()
+{
+    sendCommand(0x3C); // Border waveform:
+    sendData(0x05);    // Screen border should follow LUT1 waveform (actively drive pixels white)
+
+    sendCommand(0x18); // Temperature sensor:
+    sendData(0x80);    // Use internal temperature sensor to select an appropriate refresh waveform
+}
+
+void ZJY128296_029EAAMFGN::configUpdateSequence()
+{
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xFF);    // Will load LUT from OTP memory, Display mode 2 "differential refresh"
+        break;
+
+    case FULL:
+    default:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xF7);    // Will load LUT from OTP memory
+        break;
+    }
+}
+
+// Once the refresh operation has been started,
+// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
+// Only used when refresh is "async"
+void ZJY128296_029EAAMFGN::detachFromUpdate()
+{
+    switch (updateType) {
+    case FAST:
+        return beginPolling(50, 300); // At least 300ms for fast refresh
+    case FULL:
+    default:
+        return beginPolling(100, 2000); // At least 2 seconds for full refresh
+    }
+}
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h

@@ -0,0 +1,44 @@
+/*
+
+E-Ink display driver
+    - ZJY128296-029EAAMFGN
+    - Manufacturer: Zhongjingyuan
+    - Size: 2.9 inch
+    - Resolution: 128px x 296px
+    - Flex connector label (not a unique identifier): FPC-A005 20.06.15 TRX
+
+    Note: as of Feb. 2025, these panels are used for "WeActStudio 2.9in B&W" display modules
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./SSD16XX.h"
+
+namespace NicheGraphics::Drivers
+{
+class ZJY128296_029EAAMFGN : public SSD16XX
+{
+    // Display properties
+  private:
+    static constexpr uint32_t width = 128;
+    static constexpr uint32_t height = 296;
+    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
+
+  public:
+    ZJY128296_029EAAMFGN() : SSD16XX(width, height, supported) {}
+
+  protected:
+    void configScanning() override;
+    void configWaveform() override;
+    void configUpdateSequence() override;
+    void detachFromUpdate() override;
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h

@@ -0,0 +1,32 @@
+/*
+
+E-Ink display driver
+    - ZJY200200-0154DAAMFGN
+    - Manufacturer: Zhongjingyuan
+    - Size: 1.54 inch
+    - Resolution: 200px x 200px
+    - Flex connector marking: FPC-B001
+
+    Note: as of Feb. 2025, these panels are used for "WeActStudio 1.54in B&W" display modules
+
+    This *is* a distinct panel, however the driver is currently identical to GDEY0154D67
+    We recognize it as separate now, to avoid breaking any custom builds if the drivers do need to diverge in future.
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./GDEY0154D67.h"
+
+namespace NicheGraphics::Drivers
+{
+
+typedef GDEY0154D67 ZJY200200_0154DAAMFGN;
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/main.cpp

@@ -337,12 +337,22 @@ void setup()
 
 #ifdef LED_POWER
     pinMode(LED_POWER, OUTPUT);
-    digitalWrite(LED_POWER, HIGH);
+    digitalWrite(LED_POWER, LED_STATE_ON);
 #endif
 
 #ifdef USER_LED
     pinMode(USER_LED, OUTPUT);
-    digitalWrite(USER_LED, LOW);
+    digitalWrite(USER_LED, HIGH ^ LED_STATE_ON);
+#endif
+
+#ifdef WIFI_LED
+    pinMode(WIFI_LED, OUTPUT);
+    digitalWrite(WIFI_LED, LOW);
+#endif
+
+#ifdef BLE_LED
+    pinMode(BLE_LED, OUTPUT);
+    digitalWrite(BLE_LED, LOW);
 #endif
 
 #if defined(T_DECK)
@@ -482,19 +492,6 @@ void setup()
 
     fsInit();
 
-#if defined(_SEEED_XIAO_NRF52840_SENSE_H_)
-
-    pinMode(CHARGE_LED, INPUT); // sets to detect if charge LED is on or off to see if USB is plugged in
-
-    pinMode(HICHG, OUTPUT);
-    digitalWrite(HICHG, LOW); // 100 mA charging current if set to LOW and 50mA (actually about 20mA) if set to HIGH
-
-    pinMode(BAT_READ, OUTPUT);
-    digitalWrite(BAT_READ, LOW); // This is pin P0_14 = 14 and by pullling low to GND it provices path to read on pin 32 (P0,31)
-                                 // PIN_VBAT the voltage from divider on XIAO board
-
-#endif
-
 #if !MESHTASTIC_EXCLUDE_I2C
 #if defined(I2C_SDA1) && defined(ARCH_RP2040)
     Wire1.setSDA(I2C_SDA1);
@@ -931,6 +928,11 @@ void setup()
     service = new MeshService();
     service->init();
 
+    if (nodeDB->keyIsLowEntropy) {
+        service->reloadConfig(SEGMENT_CONFIG);
+        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+    }
+
     // Now that the mesh service is created, create any modules
     setupModules();
 

src/mesh/CryptoEngine.cpp

@@ -3,12 +3,17 @@
 #include "architecture.h"
 
 #if !(MESHTASTIC_EXCLUDE_PKI)
+#include "NodeDB.h"
 #include "aes-ccm.h"
 #include "meshUtils.h"
 #include <Crypto.h>
 #include <Curve25519.h>
+#include <RNG.h>
 #include <SHA256.h>
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
+#if !defined(ARCH_STM32WL)
+#define CryptRNG RNG
+#endif
 
 /**
  * Create a public/private key pair with Curve25519.
@@ -18,6 +23,14 @@
  */
 void CryptoEngine::generateKeyPair(uint8_t *pubKey, uint8_t *privKey)
 {
+    // Mix in any randomness we can, to make key generation stronger.
+    CryptRNG.begin(optstr(APP_VERSION));
+    if (myNodeInfo.device_id.size == 16) {
+        CryptRNG.stir(myNodeInfo.device_id.bytes, myNodeInfo.device_id.size);
+    }
+    auto noise = random();
+    CryptRNG.stir((uint8_t *)&noise, sizeof(noise));
+
     LOG_DEBUG("Generate Curve25519 keypair");
     Curve25519::dh1(public_key, private_key);
     memcpy(pubKey, public_key, sizeof(public_key));

src/mesh/NodeDB.cpp

@@ -8,6 +8,7 @@
 #include "Default.h"
 #include "FSCommon.h"
 #include "MeshRadio.h"
+#include "MeshService.h"
 #include "NodeDB.h"
 #include "PacketHistory.h"
 #include "PowerFSM.h"
@@ -261,7 +262,7 @@ NodeDB::NodeDB()
 
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
 
-    if (!owner.is_licensed) {
+    if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
         bool keygenSuccess = false;
         if (config.security.private_key.size == 32) {
             if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
@@ -287,6 +288,16 @@ NodeDB::NodeDB()
         crypto->setDHPrivateKey(config.security.private_key.bytes);
     }
 #endif
+    keyIsLowEntropy = checkLowEntropyPublicKey(config.security.public_key);
+    if (keyIsLowEntropy) {
+        LOG_WARN("Erasing low entropy keys");
+        config.security.private_key.size = 0;
+        memfll(config.security.private_key.bytes, '\0', sizeof(config.security.private_key.bytes));
+        config.security.public_key.size = 0;
+        memfll(config.security.public_key.bytes, '\0', sizeof(config.security.public_key.bytes));
+        owner.public_key.size = 0;
+        memfll(owner.public_key.bytes, '\0', sizeof(owner.public_key.bytes));
+    }
     // Include our owner in the node db under our nodenum
     meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getNodeNum());
     info->user = TypeConversions::ConvertToUserLite(owner);
@@ -499,6 +510,21 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
         true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
     config.lora.override_duty_cycle = false;
     config.lora.config_ok_to_mqtt = false;
+
+#ifdef USERPREFS_CONFIG_DEVICE_ROLE
+    // Restrict ROUTER*, LOST AND FOUND, and REPEATER roles for security reasons
+    if (IS_ONE_OF(USERPREFS_CONFIG_DEVICE_ROLE, meshtastic_Config_DeviceConfig_Role_ROUTER,
+                  meshtastic_Config_DeviceConfig_Role_ROUTER_LATE, meshtastic_Config_DeviceConfig_Role_REPEATER,
+                  meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND)) {
+        LOG_WARN("ROUTER roles are restricted, falling back to CLIENT role");
+        config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT;
+    } else {
+        config.device.role = USERPREFS_CONFIG_DEVICE_ROLE;
+    }
+#else
+    config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT; // Default to client.
+#endif
+
 #ifdef USERPREFS_CONFIG_LORA_REGION
     config.lora.region = USERPREFS_CONFIG_LORA_REGION;
 #else
@@ -671,6 +697,11 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     }
 #endif
 
+#ifdef USERPREFS_CONFIG_DEVICE_ROLE
+    // Apply role-specific defaults when role is set via user preferences
+    installRoleDefaults(config.device.role);
+#endif
+
     initConfigIntervals();
 }
 
@@ -1514,15 +1545,25 @@ void NodeDB::addFromContact(meshtastic_SharedContact contact)
         return;
     }
     info->num = contact.node_num;
-    info->last_heard = getValidTime(RTCQualityNTP);
     info->has_user = true;
     info->user = TypeConversions::ConvertToUserLite(contact.user);
-    info->is_favorite = true;
-    // Mark the node's key as manually verified to indicate trustworthiness.
-    info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
-    updateGUIforNode = info;
-    powerFSM.trigger(EVENT_NODEDB_UPDATED);
-    notifyObservers(true); // Force an update whether or not our node counts have changed
+    if (contact.should_ignore) {
+        // If should_ignore is set,
+        // we need to clear the public key and other cruft, in addition to setting the node as ignored
+        info->is_ignored = true;
+        info->has_device_metrics = false;
+        info->has_position = false;
+        info->user.public_key.size = 0;
+        info->user.public_key.bytes[0] = 0;
+    } else {
+        info->last_heard = getValidTime(RTCQualityNTP);
+        info->is_favorite = true;
+        info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
+        // Mark the node's key as manually verified to indicate trustworthiness.
+        updateGUIforNode = info;
+        powerFSM.trigger(EVENT_NODEDB_UPDATED);
+        notifyObservers(true); // Force an update whether or not our node counts have changed
+    }
     saveNodeDatabaseToDisk();
 }
 
@@ -1536,8 +1577,22 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
     }
 
 #if !(MESHTASTIC_EXCLUDE_PKI)
-    if (p.public_key.size > 0) {
+    if (p.public_key.size == 32 && nodeId != nodeDB->getNodeNum()) {
         printBytes("Incoming Pubkey: ", p.public_key.bytes, 32);
+
+        // Alert the user if a remote node is advertising public key that matches our own
+        if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0 && !duplicateWarned) {
+            duplicateWarned = true;
+            char warning[] = "Remote device %s has advertised your public key. This may indicate a compromised key. You may need "
+                             "to regenerate your public keys.";
+            LOG_WARN(warning, p.long_name);
+            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+            cn->which_payload_variant = meshtastic_ClientNotification_duplicated_public_key_tag;
+            cn->level = meshtastic_LogRecord_Level_WARNING;
+            cn->time = getValidTime(RTCQualityFromNet);
+            sprintf(cn->message, warning, p.long_name);
+            service->sendClientNotification(cn);
+        }
     }
     if (info->user.public_key.size > 0) { // if we have a key for this user already, don't overwrite with a new one
         LOG_INFO("Public Key set for node, not updating!");
@@ -1712,6 +1767,39 @@ UserLicenseStatus NodeDB::getLicenseStatus(uint32_t nodeNum)
     return info->user.is_licensed ? UserLicenseStatus::Licensed : UserLicenseStatus::NotLicensed;
 }
 
+bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t keyToTest)
+{
+    if (keyToTest.size == 32) {
+        uint8_t keyHash[32] = {0};
+        memcpy(keyHash, keyToTest.bytes, keyToTest.size);
+        crypto->hash(keyHash, 32);
+        if (memcmp(keyHash, LOW_ENTROPY_HASH1, sizeof(LOW_ENTROPY_HASH1)) ==
+                0 || // should become an array that gets looped through rather than this abomination
+            memcmp(keyHash, LOW_ENTROPY_HASH2, sizeof(LOW_ENTROPY_HASH2)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH3, sizeof(LOW_ENTROPY_HASH3)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH4, sizeof(LOW_ENTROPY_HASH4)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH5, sizeof(LOW_ENTROPY_HASH5)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH6, sizeof(LOW_ENTROPY_HASH6)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH7, sizeof(LOW_ENTROPY_HASH7)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH8, sizeof(LOW_ENTROPY_HASH8)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH9, sizeof(LOW_ENTROPY_HASH9)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH10, sizeof(LOW_ENTROPY_HASH10)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH11, sizeof(LOW_ENTROPY_HASH11)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH12, sizeof(LOW_ENTROPY_HASH12)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH13, sizeof(LOW_ENTROPY_HASH13)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH14, sizeof(LOW_ENTROPY_HASH14)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH15, sizeof(LOW_ENTROPY_HASH15)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH16, sizeof(LOW_ENTROPY_HASH16)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH17, sizeof(LOW_ENTROPY_HASH17)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH18, sizeof(LOW_ENTROPY_HASH18)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH19, sizeof(LOW_ENTROPY_HASH19)) == 0 ||
+            memcmp(keyHash, LOW_ENTROPY_HASH20, sizeof(LOW_ENTROPY_HASH20)) == 0) {
+            return true;
+        }
+    }
+    return false;
+}
+
 bool NodeDB::backupPreferences(meshtastic_AdminMessage_BackupLocation location)
 {
     bool success = false;
@@ -1822,4 +1910,4 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co
     LOG_ERROR("A critical failure occurred, portduino is exiting");
     exit(2);
 #endif
-}
+}

src/mesh/NodeDB.h

@@ -17,6 +17,70 @@
 #include "PortduinoGlue.h"
 #endif
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
+
+static const uint8_t LOW_ENTROPY_HASH1[] = {0xf4, 0x7e, 0xcc, 0x17, 0xe6, 0xb4, 0xa3, 0x22, 0xec, 0xee, 0xd9,
+                                            0x08, 0x4f, 0x39, 0x63, 0xea, 0x80, 0x75, 0xe1, 0x24, 0xce, 0x05,
+                                            0x36, 0x69, 0x63, 0xb2, 0xcb, 0xc0, 0x28, 0xd3, 0x34, 0x8b};
+static const uint8_t LOW_ENTROPY_HASH2[] = {0x5a, 0x9e, 0xa2, 0xa6, 0x8a, 0xa6, 0x66, 0xc1, 0x5f, 0x55, 0x00,
+                                            0x64, 0xa3, 0xa6, 0xfe, 0x71, 0xc0, 0xbb, 0x82, 0xc3, 0x32, 0x3d,
+                                            0x7a, 0x7a, 0xe3, 0x6e, 0xfd, 0xdd, 0xad, 0x3a, 0x66, 0xb9};
+static const uint8_t LOW_ENTROPY_HASH3[] = {0xb3, 0xdf, 0x3b, 0x2e, 0x67, 0xb6, 0xd5, 0xf8, 0xdf, 0x76, 0x2c,
+                                            0x45, 0x5e, 0x2e, 0xbd, 0x16, 0xc5, 0xf8, 0x67, 0xaa, 0x15, 0xf8,
+                                            0x92, 0x0b, 0xdf, 0x5a, 0x66, 0x50, 0xac, 0x0d, 0xbb, 0x2f};
+static const uint8_t LOW_ENTROPY_HASH4[] = {0x3b, 0x8f, 0x86, 0x3a, 0x38, 0x1f, 0x77, 0x39, 0xa9, 0x4e, 0xef,
+                                            0x91, 0x18, 0x5a, 0x62, 0xe1, 0xaa, 0x9d, 0x36, 0xea, 0xce, 0x60,
+                                            0x35, 0x8d, 0x9d, 0x1f, 0xf4, 0xb8, 0xc9, 0x13, 0x6a, 0x5d};
+static const uint8_t LOW_ENTROPY_HASH5[] = {0x36, 0x7e, 0x2d, 0xe1, 0x84, 0x5f, 0x42, 0x52, 0x29, 0x11, 0x0a,
+                                            0x25, 0x64, 0x54, 0x6a, 0x6b, 0xfd, 0xb6, 0x65, 0xff, 0x15, 0x1a,
+                                            0x51, 0x71, 0x22, 0x40, 0x57, 0xf6, 0x91, 0x9b, 0x64, 0x58};
+static const uint8_t LOW_ENTROPY_HASH6[] = {0x16, 0x77, 0xeb, 0xa4, 0x52, 0x91, 0xfb, 0x26, 0xcf, 0x8f, 0xd7,
+                                            0xd9, 0xd1, 0x5d, 0xc4, 0x68, 0x73, 0x75, 0xed, 0xc5, 0x95, 0x58,
+                                            0xee, 0x90, 0x56, 0xd4, 0x2f, 0x31, 0x29, 0xf7, 0x8c, 0x1f};
+static const uint8_t LOW_ENTROPY_HASH7[] = {0x31, 0x8c, 0xa9, 0x5e, 0xed, 0x3c, 0x12, 0xbf, 0x97, 0x9c, 0x47,
+                                            0x8e, 0x98, 0x9d, 0xc2, 0x3e, 0x86, 0x23, 0x90, 0x29, 0xc8, 0xb0,
+                                            0x20, 0xf8, 0xb1, 0xb0, 0xaa, 0x19, 0x2a, 0xcf, 0x0a, 0x54};
+static const uint8_t LOW_ENTROPY_HASH8[] = {0xa4, 0x8a, 0x99, 0x0e, 0x51, 0xdc, 0x12, 0x20, 0xf3, 0x13, 0xf5,
+                                            0x2b, 0x3a, 0xe2, 0x43, 0x42, 0xc6, 0x52, 0x98, 0xcd, 0xbb, 0xca,
+                                            0xb1, 0x31, 0xa0, 0xd4, 0xd6, 0x30, 0xf3, 0x27, 0xfb, 0x49};
+static const uint8_t LOW_ENTROPY_HASH9[] = {0xd2, 0x3f, 0x13, 0x8d, 0x22, 0x04, 0x8d, 0x07, 0x59, 0x58, 0xa0,
+                                            0xf9, 0x55, 0xcf, 0x30, 0xa0, 0x2e, 0x2f, 0xca, 0x80, 0x20, 0xe4,
+                                            0xde, 0xa1, 0xad, 0xd9, 0x58, 0xb3, 0x43, 0x2b, 0x22, 0x70};
+static const uint8_t LOW_ENTROPY_HASH10[] = {0x40, 0x41, 0xec, 0x6a, 0xd2, 0xd6, 0x03, 0xe4, 0x9a, 0x9e, 0xbd,
+                                             0x6c, 0x0a, 0x9b, 0x75, 0xa4, 0xbc, 0xab, 0x6f, 0xa7, 0x95, 0xff,
+                                             0x2d, 0xf6, 0xe9, 0xb9, 0xab, 0x4c, 0x0c, 0x1c, 0xd0, 0x3b};
+static const uint8_t LOW_ENTROPY_HASH11[] = {0x22, 0x49, 0x32, 0x2b, 0x00, 0xf9, 0x22, 0xfa, 0x17, 0x02, 0xe9,
+                                             0x64, 0x82, 0xf0, 0x4d, 0x1b, 0xc7, 0x04, 0xfc, 0xdc, 0x8c, 0x5e,
+                                             0xb6, 0xd9, 0x16, 0xd6, 0x37, 0xce, 0x59, 0xaa, 0x09, 0x49};
+static const uint8_t LOW_ENTROPY_HASH12[] = {0x48, 0x6f, 0x1e, 0x48, 0x97, 0x88, 0x64, 0xac, 0xe8, 0xeb, 0x30,
+                                             0xa3, 0xc3, 0xe1, 0xcf, 0x97, 0x39, 0xa6, 0x55, 0x5b, 0x5f, 0xbf,
+                                             0x18, 0xb7, 0x3a, 0xdf, 0xa8, 0x75, 0xe7, 0x9d, 0xe0, 0x1e};
+static const uint8_t LOW_ENTROPY_HASH13[] = {0x09, 0xb4, 0xe2, 0x6d, 0x28, 0x98, 0xc9, 0x47, 0x66, 0x46, 0xbf,
+                                             0xff, 0x58, 0x17, 0x91, 0xaa, 0xc3, 0xbf, 0x4a, 0x9d, 0x0b, 0x88,
+                                             0xb1, 0xf1, 0x03, 0xdd, 0x61, 0xd7, 0xba, 0x9e, 0x64, 0x98};
+static const uint8_t LOW_ENTROPY_HASH14[] = {0x39, 0x39, 0x84, 0xe0, 0x22, 0x2f, 0x7d, 0x78, 0x45, 0x18, 0x72,
+                                             0xb4, 0x13, 0xd2, 0x01, 0x2f, 0x3c, 0xa1, 0xb0, 0xfe, 0x39, 0xd0,
+                                             0xf1, 0x3c, 0x72, 0xd6, 0xef, 0x54, 0xd5, 0x77, 0x22, 0xa0};
+static const uint8_t LOW_ENTROPY_HASH15[] = {0x0a, 0xda, 0x5f, 0xec, 0xff, 0x5c, 0xc0, 0x2e, 0x5f, 0xc4, 0x8d,
+                                             0x03, 0xe5, 0x80, 0x59, 0xd3, 0x5d, 0x49, 0x86, 0xe9, 0x8d, 0xf6,
+                                             0xf6, 0x16, 0x35, 0x3d, 0xf9, 0x9b, 0x29, 0x55, 0x9e, 0x64};
+static const uint8_t LOW_ENTROPY_HASH16[] = {0x08, 0x56, 0xF0, 0xD7, 0xEF, 0x77, 0xD6, 0x11, 0x1C, 0x8F, 0x95,
+                                             0x2D, 0x3C, 0xDF, 0xB1, 0x22, 0xBF, 0x60, 0x9B, 0xE5, 0xA9, 0xC0,
+                                             0x6E, 0x4B, 0x01, 0xDC, 0xD1, 0x57, 0x44, 0xB2, 0xA5, 0xCF};
+static const uint8_t LOW_ENTROPY_HASH17[] = {0x2C, 0xB2, 0x77, 0x85, 0xD6, 0xB7, 0x48, 0x9C, 0xFE, 0xBC, 0x80,
+                                             0x26, 0x60, 0xF4, 0x6D, 0xCE, 0x11, 0x31, 0xA2, 0x1E, 0x33, 0x0A,
+                                             0x6D, 0x2B, 0x00, 0xFA, 0x0C, 0x90, 0x95, 0x8F, 0x5C, 0x6B};
+static const uint8_t LOW_ENTROPY_HASH18[] = {0xFA, 0x59, 0xC8, 0x6E, 0x94, 0xEE, 0x75, 0xC9, 0x9A, 0xB0, 0xFE,
+                                             0x89, 0x36, 0x40, 0xC9, 0x99, 0x4A, 0x3B, 0xF4, 0xAA, 0x12, 0x24,
+                                             0xA2, 0x0F, 0xF9, 0xD1, 0x08, 0xCB, 0x78, 0x19, 0xAA, 0xE5};
+static const uint8_t LOW_ENTROPY_HASH19[] = {0x6E, 0x42, 0x7A, 0x4A, 0x8C, 0x61, 0x62, 0x22, 0xA1, 0x89, 0xD3,
+                                             0xA4, 0xC2, 0x19, 0xA3, 0x83, 0x53, 0xA7, 0x7A, 0x0A, 0x89, 0xE2,
+                                             0x54, 0x52, 0x62, 0x3D, 0xE7, 0xCA, 0x8C, 0xF6, 0x6A, 0x60};
+static const uint8_t LOW_ENTROPY_HASH20[] = {0x20, 0x27, 0x2F, 0xBA, 0x0C, 0x99, 0xD7, 0x29, 0xF3, 0x11, 0x35,
+                                             0x89, 0x9D, 0x0E, 0x24, 0xA1, 0xC3, 0xCB, 0xDF, 0x8A, 0xF1, 0xC6,
+                                             0xFE, 0xD0, 0xD7, 0x9F, 0x92, 0xD6, 0x8F, 0x59, 0xBF, 0xE4};
+static const char LOW_ENTROPY_WARNING[] = "Compromised keys detected, please regenerate.";
+#endif
 /*
 DeviceState versions used to be defined in the .proto file but really only this function cares.  So changed to a
 #define here.
@@ -87,6 +151,9 @@ class NodeDB
     Observable<const meshtastic::NodeStatus *> newStatus;
     pb_size_t numMeshNodes;
 
+    bool keyIsLowEntropy = false;
+    bool hasWarned = false;
+
     /// don't do mesh based algorithm for node id assignment (initially)
     /// instead just store in flash - possibly even in the initial alpha release do this hack
     NodeDB();
@@ -205,11 +272,14 @@ class NodeDB
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
 
+    bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t keyToTest);
+
     bool backupPreferences(meshtastic_AdminMessage_BackupLocation location);
     bool restorePreferences(meshtastic_AdminMessage_BackupLocation location,
                             int restoreWhat = SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS);
 
   private:
+    bool duplicateWarned = false;
     uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash
     uint32_t lastBackupAttempt = 0; // when we last tried a backup automatically or manually
     /// Find a node in our DB, create an empty NodeInfoLite if missing

src/mesh/Router.cpp

@@ -548,6 +548,20 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
             numbytes += MESHTASTIC_PKC_OVERHEAD;
             p->channel = 0;
             p->pki_encrypted = true;
+
+            // warn the user about a low entropy key
+            if (nodeDB->keyIsLowEntropy) {
+                LOG_WARN(LOW_ENTROPY_WARNING);
+                if (!nodeDB->hasWarned) {
+                    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+                    cn->which_payload_variant = meshtastic_ClientNotification_low_entropy_key_tag;
+                    cn->level = meshtastic_LogRecord_Level_WARNING;
+                    cn->time = getValidTime(RTCQualityFromNet);
+                    sprintf(cn->message, LOW_ENTROPY_WARNING);
+                    service->sendClientNotification(cn);
+                    nodeDB->hasWarned = true;
+                }
+            }
         } else {
             if (p->pki_encrypted == true) {
                 // Client specifically requested PKI encryption

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -9,6 +9,9 @@
 PB_BIND(meshtastic_AdminMessage, meshtastic_AdminMessage, 2)
 
 
+PB_BIND(meshtastic_AdminMessage_InputEvent, meshtastic_AdminMessage_InputEvent, AUTO)
+
+
 PB_BIND(meshtastic_HamParameters, meshtastic_HamParameters, AUTO)
 
 

src/mesh/generated/meshtastic/admin.pb.h

@@ -91,6 +91,18 @@ typedef enum _meshtastic_KeyVerificationAdmin_MessageType {
 } meshtastic_KeyVerificationAdmin_MessageType;
 
 /* Struct definitions */
+/* Input event message to be sent to the node. */
+typedef struct _meshtastic_AdminMessage_InputEvent {
+    /* The input event code */
+    uint8_t event_code;
+    /* Keyboard character code */
+    uint8_t kb_char;
+    /* The touch X coordinate */
+    uint16_t touch_x;
+    /* The touch Y coordinate */
+    uint16_t touch_y;
+} meshtastic_AdminMessage_InputEvent;
+
 /* Parameters for setting up Meshtastic for ameteur radio usage */
 typedef struct _meshtastic_HamParameters {
     /* Amateur radio call sign, eg. KD2ABC */
@@ -118,6 +130,8 @@ typedef struct _meshtastic_SharedContact {
     /* The User of the contact */
     bool has_user;
     meshtastic_User user;
+    /* Add this contact to the blocked / ignored list */
+    bool should_ignore;
 } meshtastic_SharedContact;
 
 /* This message is used by a client to initiate or complete a key verification */
@@ -191,6 +205,9 @@ typedef struct _meshtastic_AdminMessage {
         meshtastic_AdminMessage_BackupLocation restore_preferences;
         /* Remove backups of the node's preferences */
         meshtastic_AdminMessage_BackupLocation remove_backup_preferences;
+        /* Send an input event to the node.
+     This is used to trigger physical input events like button presses, touch events, etc. */
+        meshtastic_AdminMessage_InputEvent send_input_event;
         /* Set the owner for this node */
         meshtastic_User set_owner;
         /* Set channels (using the new API).
@@ -293,22 +310,29 @@ extern "C" {
 
 
 
+
 #define meshtastic_KeyVerificationAdmin_message_type_ENUMTYPE meshtastic_KeyVerificationAdmin_MessageType
 
 
 /* Initializer values for message structs */
 #define meshtastic_AdminMessage_init_default     {0, {0}, {0, {0}}}
+#define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0}
 #define meshtastic_HamParameters_init_default    {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}}
-#define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default}
+#define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default, 0}
 #define meshtastic_KeyVerificationAdmin_init_default {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
 #define meshtastic_AdminMessage_init_zero        {0, {0}, {0, {0}}}
+#define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0}
 #define meshtastic_HamParameters_init_zero       {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}}
-#define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero}
+#define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero, 0}
 #define meshtastic_KeyVerificationAdmin_init_zero {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
+#define meshtastic_AdminMessage_InputEvent_event_code_tag 1
+#define meshtastic_AdminMessage_InputEvent_kb_char_tag 2
+#define meshtastic_AdminMessage_InputEvent_touch_x_tag 3
+#define meshtastic_AdminMessage_InputEvent_touch_y_tag 4
 #define meshtastic_HamParameters_call_sign_tag   1
 #define meshtastic_HamParameters_tx_power_tag    2
 #define meshtastic_HamParameters_frequency_tag   3
@@ -316,6 +340,7 @@ extern "C" {
 #define meshtastic_NodeRemoteHardwarePinsResponse_node_remote_hardware_pins_tag 1
 #define meshtastic_SharedContact_node_num_tag    1
 #define meshtastic_SharedContact_user_tag        2
+#define meshtastic_SharedContact_should_ignore_tag 3
 #define meshtastic_KeyVerificationAdmin_message_type_tag 1
 #define meshtastic_KeyVerificationAdmin_remote_nodenum_tag 2
 #define meshtastic_KeyVerificationAdmin_nonce_tag 3
@@ -345,6 +370,7 @@ extern "C" {
 #define meshtastic_AdminMessage_backup_preferences_tag 24
 #define meshtastic_AdminMessage_restore_preferences_tag 25
 #define meshtastic_AdminMessage_remove_backup_preferences_tag 26
+#define meshtastic_AdminMessage_send_input_event_tag 27
 #define meshtastic_AdminMessage_set_owner_tag    32
 #define meshtastic_AdminMessage_set_channel_tag  33
 #define meshtastic_AdminMessage_set_config_tag   34
@@ -402,6 +428,7 @@ X(a, STATIC,   ONEOF,    UINT32,   (payload_variant,set_scale,set_scale),  23) \
 X(a, STATIC,   ONEOF,    UENUM,    (payload_variant,backup_preferences,backup_preferences),  24) \
 X(a, STATIC,   ONEOF,    UENUM,    (payload_variant,restore_preferences,restore_preferences),  25) \
 X(a, STATIC,   ONEOF,    UENUM,    (payload_variant,remove_backup_preferences,remove_backup_preferences),  26) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,send_input_event,send_input_event),  27) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_owner,set_owner),  32) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_channel,set_channel),  33) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,set_config,set_config),  34) \
@@ -441,6 +468,7 @@ X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_payload_variant_get_device_connection_status_response_MSGTYPE meshtastic_DeviceConnectionStatus
 #define meshtastic_AdminMessage_payload_variant_set_ham_mode_MSGTYPE meshtastic_HamParameters
 #define meshtastic_AdminMessage_payload_variant_get_node_remote_hardware_pins_response_MSGTYPE meshtastic_NodeRemoteHardwarePinsResponse
+#define meshtastic_AdminMessage_payload_variant_send_input_event_MSGTYPE meshtastic_AdminMessage_InputEvent
 #define meshtastic_AdminMessage_payload_variant_set_owner_MSGTYPE meshtastic_User
 #define meshtastic_AdminMessage_payload_variant_set_channel_MSGTYPE meshtastic_Channel
 #define meshtastic_AdminMessage_payload_variant_set_config_MSGTYPE meshtastic_Config
@@ -451,6 +479,14 @@ X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_payload_variant_add_contact_MSGTYPE meshtastic_SharedContact
 #define meshtastic_AdminMessage_payload_variant_key_verification_MSGTYPE meshtastic_KeyVerificationAdmin
 
+#define meshtastic_AdminMessage_InputEvent_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UINT32,   event_code,        1) \
+X(a, STATIC,   SINGULAR, UINT32,   kb_char,           2) \
+X(a, STATIC,   SINGULAR, UINT32,   touch_x,           3) \
+X(a, STATIC,   SINGULAR, UINT32,   touch_y,           4)
+#define meshtastic_AdminMessage_InputEvent_CALLBACK NULL
+#define meshtastic_AdminMessage_InputEvent_DEFAULT NULL
+
 #define meshtastic_HamParameters_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   call_sign,         1) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,          2) \
@@ -467,7 +503,8 @@ X(a, STATIC,   REPEATED, MESSAGE,  node_remote_hardware_pins,   1)
 
 #define meshtastic_SharedContact_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   node_num,          1) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  user,              2)
+X(a, STATIC,   OPTIONAL, MESSAGE,  user,              2) \
+X(a, STATIC,   SINGULAR, BOOL,     should_ignore,     3)
 #define meshtastic_SharedContact_CALLBACK NULL
 #define meshtastic_SharedContact_DEFAULT NULL
 #define meshtastic_SharedContact_user_MSGTYPE meshtastic_User
@@ -481,6 +518,7 @@ X(a, STATIC,   OPTIONAL, UINT32,   security_number,   4)
 #define meshtastic_KeyVerificationAdmin_DEFAULT NULL
 
 extern const pb_msgdesc_t meshtastic_AdminMessage_msg;
+extern const pb_msgdesc_t meshtastic_AdminMessage_InputEvent_msg;
 extern const pb_msgdesc_t meshtastic_HamParameters_msg;
 extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 extern const pb_msgdesc_t meshtastic_SharedContact_msg;
@@ -488,6 +526,7 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
 #define meshtastic_AdminMessage_fields &meshtastic_AdminMessage_msg
+#define meshtastic_AdminMessage_InputEvent_fields &meshtastic_AdminMessage_InputEvent_msg
 #define meshtastic_HamParameters_fields &meshtastic_HamParameters_msg
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 #define meshtastic_SharedContact_fields &meshtastic_SharedContact_msg
@@ -495,11 +534,12 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_ADMIN_PB_H_MAX_SIZE meshtastic_AdminMessage_size
+#define meshtastic_AdminMessage_InputEvent_size  14
 #define meshtastic_AdminMessage_size             511
 #define meshtastic_HamParameters_size            31
 #define meshtastic_KeyVerificationAdmin_size     25
 #define meshtastic_NodeRemoteHardwarePinsResponse_size 496
-#define meshtastic_SharedContact_size            123
+#define meshtastic_SharedContact_size            125
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/config.pb.cpp

@@ -65,6 +65,8 @@ PB_BIND(meshtastic_Config_SessionkeyConfig, meshtastic_Config_SessionkeyConfig,
 
 
 
+
+
 
 
 

src/mesh/generated/meshtastic/config.pb.h

@@ -88,6 +88,23 @@ typedef enum _meshtastic_Config_DeviceConfig_RebroadcastMode {
     meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY = 5
 } meshtastic_Config_DeviceConfig_RebroadcastMode;
 
+/* Defines buzzer behavior for audio feedback */
+typedef enum _meshtastic_Config_DeviceConfig_BuzzerMode {
+    /* Default behavior.
+ Buzzer is enabled for all audio feedback including button presses and alerts. */
+    meshtastic_Config_DeviceConfig_BuzzerMode_ALL_ENABLED = 0,
+    /* Disabled.
+ All buzzer audio feedback is disabled. */
+    meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED = 1,
+    /* Notifications Only.
+ Buzzer is enabled only for notifications and alerts, but not for button presses.
+ External notification config determines the specifics of the notification behavior. */
+    meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY = 2,
+    /* Non-notification system buzzer tones only.
+ Buzzer is enabled only for non-notification tones such as button presses, startup, shutdown, but not for alerts. */
+    meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY = 3
+} meshtastic_Config_DeviceConfig_BuzzerMode;
+
 /* Bit field of boolean configuration options, indicating which optional
  fields to include when assembling POSITION messages.
  Longitude, latitude, altitude, speed, heading, and DOP
@@ -335,6 +352,9 @@ typedef struct _meshtastic_Config_DeviceConfig {
     char tzdef[65];
     /* If true, disable the default blinking LED (LED_PIN) behavior on the device */
     bool led_heartbeat_disabled;
+    /* Controls buzzer behavior for audio feedback
+ Defaults to ENABLED */
+    meshtastic_Config_DeviceConfig_BuzzerMode buzzer_mode;
 } meshtastic_Config_DeviceConfig;
 
 /* Position Config */
@@ -618,6 +638,10 @@ extern "C" {
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_RebroadcastMode)(meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY+1))
 
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_MIN meshtastic_Config_DeviceConfig_BuzzerMode_ALL_ENABLED
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_MAX meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_BuzzerMode)(meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY+1))
+
 #define _meshtastic_Config_PositionConfig_PositionFlags_MIN meshtastic_Config_PositionConfig_PositionFlags_UNSET
 #define _meshtastic_Config_PositionConfig_PositionFlags_MAX meshtastic_Config_PositionConfig_PositionFlags_SPEED
 #define _meshtastic_Config_PositionConfig_PositionFlags_ARRAYSIZE ((meshtastic_Config_PositionConfig_PositionFlags)(meshtastic_Config_PositionConfig_PositionFlags_SPEED+1))
@@ -669,6 +693,7 @@ extern "C" {
 
 #define meshtastic_Config_DeviceConfig_role_ENUMTYPE meshtastic_Config_DeviceConfig_Role
 #define meshtastic_Config_DeviceConfig_rebroadcast_mode_ENUMTYPE meshtastic_Config_DeviceConfig_RebroadcastMode
+#define meshtastic_Config_DeviceConfig_buzzer_mode_ENUMTYPE meshtastic_Config_DeviceConfig_BuzzerMode
 
 #define meshtastic_Config_PositionConfig_gps_mode_ENUMTYPE meshtastic_Config_PositionConfig_GpsMode
 
@@ -692,7 +717,7 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_Config_init_default           {0, {meshtastic_Config_DeviceConfig_init_default}}
-#define meshtastic_Config_DeviceConfig_init_default {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0}
+#define meshtastic_Config_DeviceConfig_init_default {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0, _meshtastic_Config_DeviceConfig_BuzzerMode_MIN}
 #define meshtastic_Config_PositionConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, _meshtastic_Config_PositionConfig_GpsMode_MIN}
 #define meshtastic_Config_PowerConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_Config_NetworkConfig_init_default {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_default, "", 0, 0}
@@ -703,7 +728,7 @@ extern "C" {
 #define meshtastic_Config_SecurityConfig_init_default {{0, {0}}, {0, {0}}, 0, {{0, {0}}, {0, {0}}, {0, {0}}}, 0, 0, 0, 0}
 #define meshtastic_Config_SessionkeyConfig_init_default {0}
 #define meshtastic_Config_init_zero              {0, {meshtastic_Config_DeviceConfig_init_zero}}
-#define meshtastic_Config_DeviceConfig_init_zero {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0}
+#define meshtastic_Config_DeviceConfig_init_zero {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0, _meshtastic_Config_DeviceConfig_BuzzerMode_MIN}
 #define meshtastic_Config_PositionConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, _meshtastic_Config_PositionConfig_GpsMode_MIN}
 #define meshtastic_Config_PowerConfig_init_zero  {0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_Config_NetworkConfig_init_zero {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_zero, "", 0, 0}
@@ -726,6 +751,7 @@ extern "C" {
 #define meshtastic_Config_DeviceConfig_disable_triple_click_tag 10
 #define meshtastic_Config_DeviceConfig_tzdef_tag 11
 #define meshtastic_Config_DeviceConfig_led_heartbeat_disabled_tag 12
+#define meshtastic_Config_DeviceConfig_buzzer_mode_tag 13
 #define meshtastic_Config_PositionConfig_position_broadcast_secs_tag 1
 #define meshtastic_Config_PositionConfig_position_broadcast_smart_enabled_tag 2
 #define meshtastic_Config_PositionConfig_fixed_position_tag 3
@@ -849,7 +875,8 @@ X(a, STATIC,   SINGULAR, BOOL,     double_tap_as_button_press,   8) \
 X(a, STATIC,   SINGULAR, BOOL,     is_managed,        9) \
 X(a, STATIC,   SINGULAR, BOOL,     disable_triple_click,  10) \
 X(a, STATIC,   SINGULAR, STRING,   tzdef,            11) \
-X(a, STATIC,   SINGULAR, BOOL,     led_heartbeat_disabled,  12)
+X(a, STATIC,   SINGULAR, BOOL,     led_heartbeat_disabled,  12) \
+X(a, STATIC,   SINGULAR, UENUM,    buzzer_mode,      13)
 #define meshtastic_Config_DeviceConfig_CALLBACK NULL
 #define meshtastic_Config_DeviceConfig_DEFAULT NULL
 
@@ -995,7 +1022,7 @@ extern const pb_msgdesc_t meshtastic_Config_SessionkeyConfig_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_CONFIG_PB_H_MAX_SIZE meshtastic_Config_size
 #define meshtastic_Config_BluetoothConfig_size   10
-#define meshtastic_Config_DeviceConfig_size      98
+#define meshtastic_Config_DeviceConfig_size      100
 #define meshtastic_Config_DisplayConfig_size     32
 #define meshtastic_Config_LoRaConfig_size        85
 #define meshtastic_Config_NetworkConfig_IpV4Config_size 20

src/mesh/generated/meshtastic/device_ui.pb.h

@@ -55,6 +55,8 @@ typedef enum _meshtastic_Language {
     meshtastic_Language_SLOVENIAN = 15,
     /* Ukrainian */
     meshtastic_Language_UKRAINIAN = 16,
+    /* Bulgarian */
+    meshtastic_Language_BULGARIAN = 17,
     /* Simplified Chinese (experimental) */
     meshtastic_Language_SIMPLIFIED_CHINESE = 30,
     /* Traditional Chinese (experimental) */

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -360,7 +360,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2269
+#define meshtastic_BackupPreferences_size        2271
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1722
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -187,7 +187,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
-#define meshtastic_LocalConfig_size              745
+#define meshtastic_LocalConfig_size              747
 #define meshtastic_LocalModuleConfig_size        669
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -60,6 +60,12 @@ PB_BIND(meshtastic_KeyVerificationNumberRequest, meshtastic_KeyVerificationNumbe
 PB_BIND(meshtastic_KeyVerificationFinal, meshtastic_KeyVerificationFinal, AUTO)
 
 
+PB_BIND(meshtastic_DuplicatedPublicKey, meshtastic_DuplicatedPublicKey, AUTO)
+
+
+PB_BIND(meshtastic_LowEntropyKey, meshtastic_LowEntropyKey, AUTO)
+
+
 PB_BIND(meshtastic_FileInfo, meshtastic_FileInfo, AUTO)
 
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -258,6 +258,15 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK = 100,
     /* Reserved ID for future and past use */
     meshtastic_HardwareModel_QWANTZ_TINY_ARMS = 101,
+    /* *
+ Lilygo T-Deck Pro */
+    meshtastic_HardwareModel_T_DECK_PRO = 102,
+    /* *
+ Lilygo TLora Pager */
+    meshtastic_HardwareModel_T_LORA_PAGER = 103,
+    /* *
+ GAT562 Mesh Trial Tracker */
+    meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER = 104,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -949,6 +958,14 @@ typedef struct _meshtastic_KeyVerificationFinal {
     char verification_characters[10];
 } meshtastic_KeyVerificationFinal;
 
+typedef struct _meshtastic_DuplicatedPublicKey {
+    char dummy_field;
+} meshtastic_DuplicatedPublicKey;
+
+typedef struct _meshtastic_LowEntropyKey {
+    char dummy_field;
+} meshtastic_LowEntropyKey;
+
 /* A notification message from the device to the client
  To be used for important messages that should to be displayed to the user
  in the form of push notifications or validation messages when saving
@@ -968,6 +985,8 @@ typedef struct _meshtastic_ClientNotification {
         meshtastic_KeyVerificationNumberInform key_verification_number_inform;
         meshtastic_KeyVerificationNumberRequest key_verification_number_request;
         meshtastic_KeyVerificationFinal key_verification_final;
+        meshtastic_DuplicatedPublicKey duplicated_public_key;
+        meshtastic_LowEntropyKey low_entropy_key;
     } payload_variant;
 } meshtastic_ClientNotification;
 
@@ -1248,6 +1267,8 @@ extern "C" {
 
 
 
+
+
 #define meshtastic_Compressed_portnum_ENUMTYPE meshtastic_PortNum
 
 
@@ -1280,6 +1301,8 @@ extern "C" {
 #define meshtastic_KeyVerificationNumberInform_init_default {0, "", 0}
 #define meshtastic_KeyVerificationNumberRequest_init_default {0, ""}
 #define meshtastic_KeyVerificationFinal_init_default {0, "", 0, ""}
+#define meshtastic_DuplicatedPublicKey_init_default {0}
+#define meshtastic_LowEntropyKey_init_default    {0}
 #define meshtastic_FileInfo_init_default         {"", 0}
 #define meshtastic_ToRadio_init_default          {0, {meshtastic_MeshPacket_init_default}}
 #define meshtastic_Compressed_init_default       {_meshtastic_PortNum_MIN, {0, {0}}}
@@ -1309,6 +1332,8 @@ extern "C" {
 #define meshtastic_KeyVerificationNumberInform_init_zero {0, "", 0}
 #define meshtastic_KeyVerificationNumberRequest_init_zero {0, ""}
 #define meshtastic_KeyVerificationFinal_init_zero {0, "", 0, ""}
+#define meshtastic_DuplicatedPublicKey_init_zero {0}
+#define meshtastic_LowEntropyKey_init_zero       {0}
 #define meshtastic_FileInfo_init_zero            {"", 0}
 #define meshtastic_ToRadio_init_zero             {0, {meshtastic_MeshPacket_init_zero}}
 #define meshtastic_Compressed_init_zero          {_meshtastic_PortNum_MIN, {0, {0}}}
@@ -1446,6 +1471,8 @@ extern "C" {
 #define meshtastic_ClientNotification_key_verification_number_inform_tag 11
 #define meshtastic_ClientNotification_key_verification_number_request_tag 12
 #define meshtastic_ClientNotification_key_verification_final_tag 13
+#define meshtastic_ClientNotification_duplicated_public_key_tag 14
+#define meshtastic_ClientNotification_low_entropy_key_tag 15
 #define meshtastic_FileInfo_file_name_tag        1
 #define meshtastic_FileInfo_size_bytes_tag       2
 #define meshtastic_Compressed_portnum_tag        1
@@ -1714,12 +1741,16 @@ X(a, STATIC,   SINGULAR, UENUM,    level,             3) \
 X(a, STATIC,   SINGULAR, STRING,   message,           4) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification_number_inform,payload_variant.key_verification_number_inform),  11) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification_number_request,payload_variant.key_verification_number_request),  12) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification_final,payload_variant.key_verification_final),  13)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,key_verification_final,payload_variant.key_verification_final),  13) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,duplicated_public_key,payload_variant.duplicated_public_key),  14) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,low_entropy_key,payload_variant.low_entropy_key),  15)
 #define meshtastic_ClientNotification_CALLBACK NULL
 #define meshtastic_ClientNotification_DEFAULT NULL
 #define meshtastic_ClientNotification_payload_variant_key_verification_number_inform_MSGTYPE meshtastic_KeyVerificationNumberInform
 #define meshtastic_ClientNotification_payload_variant_key_verification_number_request_MSGTYPE meshtastic_KeyVerificationNumberRequest
 #define meshtastic_ClientNotification_payload_variant_key_verification_final_MSGTYPE meshtastic_KeyVerificationFinal
+#define meshtastic_ClientNotification_payload_variant_duplicated_public_key_MSGTYPE meshtastic_DuplicatedPublicKey
+#define meshtastic_ClientNotification_payload_variant_low_entropy_key_MSGTYPE meshtastic_LowEntropyKey
 
 #define meshtastic_KeyVerificationNumberInform_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT64,   nonce,             1) \
@@ -1742,6 +1773,16 @@ X(a, STATIC,   SINGULAR, STRING,   verification_characters,   4)
 #define meshtastic_KeyVerificationFinal_CALLBACK NULL
 #define meshtastic_KeyVerificationFinal_DEFAULT NULL
 
+#define meshtastic_DuplicatedPublicKey_FIELDLIST(X, a) \
+
+#define meshtastic_DuplicatedPublicKey_CALLBACK NULL
+#define meshtastic_DuplicatedPublicKey_DEFAULT NULL
+
+#define meshtastic_LowEntropyKey_FIELDLIST(X, a) \
+
+#define meshtastic_LowEntropyKey_CALLBACK NULL
+#define meshtastic_LowEntropyKey_DEFAULT NULL
+
 #define meshtastic_FileInfo_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   file_name,         1) \
 X(a, STATIC,   SINGULAR, UINT32,   size_bytes,        2)
@@ -1853,6 +1894,8 @@ extern const pb_msgdesc_t meshtastic_ClientNotification_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationNumberInform_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationNumberRequest_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationFinal_msg;
+extern const pb_msgdesc_t meshtastic_DuplicatedPublicKey_msg;
+extern const pb_msgdesc_t meshtastic_LowEntropyKey_msg;
 extern const pb_msgdesc_t meshtastic_FileInfo_msg;
 extern const pb_msgdesc_t meshtastic_ToRadio_msg;
 extern const pb_msgdesc_t meshtastic_Compressed_msg;
@@ -1884,6 +1927,8 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_KeyVerificationNumberInform_fields &meshtastic_KeyVerificationNumberInform_msg
 #define meshtastic_KeyVerificationNumberRequest_fields &meshtastic_KeyVerificationNumberRequest_msg
 #define meshtastic_KeyVerificationFinal_fields &meshtastic_KeyVerificationFinal_msg
+#define meshtastic_DuplicatedPublicKey_fields &meshtastic_DuplicatedPublicKey_msg
+#define meshtastic_LowEntropyKey_fields &meshtastic_LowEntropyKey_msg
 #define meshtastic_FileInfo_fields &meshtastic_FileInfo_msg
 #define meshtastic_ToRadio_fields &meshtastic_ToRadio_msg
 #define meshtastic_Compressed_fields &meshtastic_Compressed_msg
@@ -1905,6 +1950,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_Compressed_size               239
 #define meshtastic_Data_size                     269
 #define meshtastic_DeviceMetadata_size           54
+#define meshtastic_DuplicatedPublicKey_size      0
 #define meshtastic_FileInfo_size                 236
 #define meshtastic_FromRadio_size                510
 #define meshtastic_Heartbeat_size                0
@@ -1913,6 +1959,7 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_KeyVerificationNumberRequest_size 52
 #define meshtastic_KeyVerification_size          79
 #define meshtastic_LogRecord_size                426
+#define meshtastic_LowEntropyKey_size            0
 #define meshtastic_MeshPacket_size               378
 #define meshtastic_MqttClientProxyMessage_size   501
 #define meshtastic_MyNodeInfo_size               77

src/mesh/wifi/WiFiAPClient.cpp

@@ -327,9 +327,15 @@ static void WiFiEvent(WiFiEvent_t event)
         break;
     case ARDUINO_EVENT_WIFI_STA_CONNECTED:
         LOG_INFO("Connected to access point");
+#ifdef WIFI_LED
+        digitalWrite(WIFI_LED, HIGH);
+#endif
         break;
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         LOG_INFO("Disconnected from WiFi access point");
+#ifdef WIFI_LED
+        digitalWrite(WIFI_LED, LOW);
+#endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
             syslog.disable();
@@ -378,9 +384,15 @@ static void WiFiEvent(WiFiEvent_t event)
         break;
     case ARDUINO_EVENT_WIFI_AP_START:
         LOG_INFO("WiFi access point started");
+#ifdef WIFI_LED
+        digitalWrite(WIFI_LED, HIGH);
+#endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STOP:
         LOG_INFO("WiFi access point stopped");
+#ifdef WIFI_LED
+        digitalWrite(WIFI_LED, LOW);
+#endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STACONNECTED:
         LOG_INFO("Client connected");
@@ -474,4 +486,4 @@ uint8_t getWifiDisconnectReason()
 {
     return wifiDisconnectReason;
 }
-#endif
+#endif

src/modules/AdminModule.cpp

@@ -7,6 +7,7 @@
 #include "SPILock.h"
 #include "meshUtils.h"
 #include <FSCommon.h>
+#include <ctype.h> // for better whitespace handling
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_BLUETOOTH
 #include "BleOta.h"
 #endif
@@ -155,6 +156,28 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
      */
     case meshtastic_AdminMessage_set_owner_tag:
         LOG_DEBUG("Client set owner");
+        // Validate names
+        if (*r->set_owner.long_name) {
+            const char *start = r->set_owner.long_name;
+            // Skip all whitespace (space, tab, newline, etc)
+            while (*start && isspace((unsigned char)*start))
+                start++;
+            if (*start == '\0') {
+                LOG_WARN("Rejected long_name: must contain at least 1 non-whitespace character");
+                myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
+                break;
+            }
+        }
+        if (*r->set_owner.short_name) {
+            const char *start = r->set_owner.short_name;
+            while (*start && isspace((unsigned char)*start))
+                start++;
+            if (*start == '\0') {
+                LOG_WARN("Rejected short_name: must contain at least 1 non-whitespace character");
+                myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
+                break;
+            }
+        }
         handleSetOwner(r->set_owner);
         break;
 
@@ -661,6 +684,24 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.lora = c.payload_variant.lora;
         // If we're setting region for the first time, init the region
         if (isRegionUnset && config.lora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+            if (!owner.is_licensed) {
+                bool keygenSuccess = false;
+                if (config.security.private_key.size == 32) {
+                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                        keygenSuccess = true;
+                    }
+                } else {
+                    LOG_INFO("Generate new PKI keys");
+                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+                    keygenSuccess = true;
+                }
+                if (keygenSuccess) {
+                    config.security.public_key.size = 32;
+                    config.security.private_key.size = 32;
+                    owner.public_key.size = 32;
+                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+                }
+            }
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {
@@ -681,11 +722,16 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         LOG_INFO("Set config: Security");
         config.security = c.payload_variant.security;
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN) && !(MESHTASTIC_EXCLUDE_PKI)
-        // We check for a potentially valid private key, and a blank public key, and regen the public key if needed.
-        if (config.security.private_key.size == 32 && !memfll(config.security.private_key.bytes, 0, 32) &&
-            (config.security.public_key.size == 0 || memfll(config.security.public_key.bytes, 0, 32))) {
-            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
-                config.security.public_key.size = 32;
+        // If the client set the key to blank, go ahead and regenerate so long as we're not in ham mode
+        if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+            if (config.security.private_key.size != 32) {
+                crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+
+            } else if (config.security.public_key.size != 32) {
+                // We check for a potentially valid private key, and a blank public key, and regen the public key if needed.
+                if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                    config.security.public_key.size = 32;
+                }
             }
         }
 #endif
@@ -1135,6 +1181,27 @@ void AdminModule::handleStoreDeviceUIConfig(const meshtastic_DeviceUIConfig &uic
 
 void AdminModule::handleSetHamMode(const meshtastic_HamParameters &p)
 {
+    // Validate ham parameters before setting since this would bypass validation in the owner struct
+    if (*p.call_sign) {
+        const char *start = p.call_sign;
+        // Skip all whitespace
+        while (*start && isspace((unsigned char)*start))
+            start++;
+        if (*start == '\0') {
+            LOG_WARN("Rejected ham call_sign: must contain at least 1 non-whitespace character");
+            return;
+        }
+    }
+    if (*p.short_name) {
+        const char *start = p.short_name;
+        while (*start && isspace((unsigned char)*start))
+            start++;
+        if (*start == '\0') {
+            LOG_WARN("Rejected ham short_name: must contain at least 1 non-whitespace character");
+            return;
+        }
+    }
+
     // Set call sign and override lora limitations for licensed use
     strncpy(owner.long_name, p.call_sign, sizeof(owner.long_name));
     strncpy(owner.short_name, p.short_name, sizeof(owner.short_name));

src/modules/Telemetry/HostMetrics.cpp

@@ -34,7 +34,8 @@ bool HostMetricsModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp,
                  sender, t->variant.host_metrics.uptime_seconds, t->variant.host_metrics.diskfree1_bytes,
                  t->variant.host_metrics.freemem_bytes, static_cast<float>(t->variant.host_metrics.load1) / 100,
                  static_cast<float>(t->variant.host_metrics.load5) / 100,
-                 static_cast<float>(t->variant.host_metrics.load15) / 100, t->variant.host_metrics.user_string);
+                 static_cast<float>(t->variant.host_metrics.load15) / 100,
+                 t->variant.host_metrics.has_user_string ? t->variant.host_metrics.user_string : "");
 #endif
     }
     return false; // Let others look at this message also if they want
@@ -124,7 +125,8 @@ bool HostMetricsModule::sendMetrics()
              telemetry.variant.host_metrics.uptime_seconds, telemetry.variant.host_metrics.diskfree1_bytes,
              telemetry.variant.host_metrics.freemem_bytes, static_cast<float>(telemetry.variant.host_metrics.load1) / 100,
              static_cast<float>(telemetry.variant.host_metrics.load5) / 100,
-             static_cast<float>(telemetry.variant.host_metrics.load15) / 100, telemetry.variant.host_metrics.user_string);
+             static_cast<float>(telemetry.variant.host_metrics.load15) / 100,
+             telemetry.variant.host_metrics.has_user_string ? telemetry.variant.host_metrics.user_string : "");
 
     meshtastic_MeshPacket *p = allocDataProtobuf(telemetry);
     p->to = NODENUM_BROADCAST;

src/modules/Telemetry/Sensor/INA3221Sensor.h

@@ -8,16 +8,24 @@
 #include "VoltageSensor.h"
 #include <INA3221.h>
 
+#ifndef INA3221_ENV_CH
+#define INA3221_ENV_CH INA3221_CH1
+#endif
+
+#ifndef INA3221_BAT_CH
+#define INA3221_BAT_CH INA3221_CH1
+#endif
+
 class INA3221Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
 {
   private:
     INA3221 ina3221 = INA3221(INA3221_ADDR42_SDA);
 
     // channel to report voltage/current for environment metrics
-    ina3221_ch_t ENV_CH = INA3221_CH1;
+    static const ina3221_ch_t ENV_CH = INA3221_ENV_CH;
 
     // channel to report battery voltage for device_battery_ina_address
-    ina3221_ch_t BAT_CH = INA3221_CH1;
+    static const ina3221_ch_t BAT_CH = INA3221_BAT_CH;
 
     // get a single measurement for a channel
     struct _INA3221Measurement getMeasurement(ina3221_ch_t ch);

src/mqtt/MQTT.cpp

@@ -763,7 +763,10 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_Me
         }
         entry->topic = std::move(topic);
         entry->envBytes.assign(bytes, numBytes);
-        assert(mqttQueue.enqueue(entry, 0));
+        if (mqttQueue.enqueue(entry, 0) == false) {
+            LOG_CRIT("Failed to add a message to mqttQueue!");
+            abort();
+        }
     }
 }
 

src/nimble/NimbleBluetooth.cpp

@@ -171,6 +171,11 @@ void NimbleBluetooth::deinit()
 {
 #ifdef ARCH_ESP32
     LOG_INFO("Disable bluetooth until reboot");
+
+#ifdef BLE_LED
+    digitalWrite(BLE_LED, LOW);
+#endif
+
     NimBLEDevice::deinit();
 #endif
 }

src/platform/esp32/main-esp32.cpp

@@ -56,9 +56,11 @@ void updateBatteryLevel(uint8_t level) {}
 void getMacAddr(uint8_t *dmac)
 {
 #if defined(CONFIG_IDF_TARGET_ESP32C6) && defined(CONFIG_SOC_IEEE802154_SUPPORTED)
-    assert(esp_base_mac_addr_get(dmac) == ESP_OK);
+    auto res = esp_base_mac_addr_get(dmac);
+    assert(res == ESP_OK);
 #else
-    assert(esp_efuse_mac_get_default(dmac) == ESP_OK);
+    auto res = esp_efuse_mac_get_default(dmac);
+    assert(res == ESP_OK);
 #endif
 }
 

src/platform/nrf52/architecture.h

@@ -49,6 +49,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_RAK2560
 #elif defined(WISMESH_TAP)
 #define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAP
+#elif defined(GAT562_MESH_TRIAL_TRACKER)
+#define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
 #elif defined(TTGO_T_ECHO)
@@ -85,6 +87,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_SOLAR_NODE
 #elif defined(HELTEC_MESH_POCKET)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_POCKET
+#elif defined(NOMADSTAR_METEOR_PRO)
+#define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
 #elif defined(SEEED_WIO_TRACKER_L1)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
 #else
@@ -139,4 +143,4 @@
 #if !defined(PIN_SERIAL_RX) && !defined(NRF52840_XXAA)
 // No serial ports on this board - ONLY use segger in memory console
 #define USE_SEGGER
-#endif
+#endif

src/sleep.cpp

@@ -332,7 +332,7 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
     }
 #endif
 
-#if defined(ARCH_ESP32) && defined(I2C_SDA)
+#if !MESHTASTIC_EXCLUDE_I2C && defined(ARCH_ESP32) && defined(I2C_SDA)
     // Added by https://github.com/meshtastic/firmware/pull/4418
     // Possibly to support Heltec Capsule Sensor?
     Wire.end();
@@ -542,4 +542,4 @@ void enableLoraInterrupt()
     }
 #endif
 }
-#endif
+#endif

userPrefs.jsonc

@@ -21,6 +21,7 @@
   // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
   // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
   // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
+  // "USERPREFS_CONFIG_DEVICE_ROLE": "meshtastic_Config_DeviceConfig_Role_CLIENT", // Defaults to CLIENT. ROUTER*, LOST AND FOUND, and REPEATER roles are restricted.
   // "USERPREFS_EVENT_MODE": "1",
   // "USERPREFS_FIXED_BLUETOOTH": "121212",
   // "USERPREFS_FIXED_GPS": "",

variants/diy/hydra/variant.h

@@ -8,7 +8,9 @@
 #define PIN_GPS_EN 4
 #define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
 
-#define BUTTON_PIN 39  // The middle button GPIO on the T-Beam
+#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
+// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
+// If 39 is not being used for a button, it is suggested to remove the #define.
 #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 #define ADC_CHANNEL ADC1_GPIO35_CHANNEL
 #define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)

variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py

@@ -0,0 +1,62 @@
+# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays
+# - build using custom task in Platformio's "Project Tasks" panel
+# - build with `pio run -e <variant> -t build_weact_154` (or similar)
+
+# Silence trunk's objections to the import statements
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821)
+
+from SCons.Script import COMMAND_LINE_TARGETS
+
+Import("env")
+Import("projenv")
+
+# Custom targets
+# These wrappers just run the normal build task under a different target name
+# We intercept the build later on, based on the target name
+env.AddTarget(
+    name="build_weact_154",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 1.54")',
+)
+env.AddTarget(
+    name="build_weact_213",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 2.13")',
+)
+env.AddTarget(
+    name="build_weact_290",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 2.9")',
+)
+env.AddTarget(
+    name="build_weact_420",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 4.2")',
+)
+
+# Check whether a build was started via one of our custom targets above
+
+if "build_weact_154" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 1.54" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
+
+elif "build_weact_213" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 2.13" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10"))
+
+elif "build_weact_290" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 2.9" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
+
+elif "build_weact_420" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 4.2" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))

variants/diy/nrf52_promicro_diy_tcxo/nicheGraphics.h

@@ -0,0 +1,94 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h"        // WeAct 2.13"
+#include "graphics/niche/Drivers/EInk/HINK_E042A87.h"          // WeAct 4.2"
+#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h"  // WeAct 2.9"
+#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54"
+
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE)
+#error If not using a DIY preset, display model and resilience must be set manually
+#endif
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+    SPI.begin();
+
+    // Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER;
+    driver->begin(&SPI, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update.
+    inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
+    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+
+    // Init settings, and customize defaults
+    // Values ignored individually if found saved to flash
+    inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed
+    inkhud->persistence->settings.userTiles.maxCount = 4;
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
+
+    // Pick applets
+    // Note: order of applets determines priority of "auto-show" feature
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet);
+    inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3);                       // Default on tile 3
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1);      // Default on tile 1
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true);                        // Background
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+
+    // Setup the main user button
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin(), true); // Internal pull up
+    buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
+    buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
+
+    buttons->start();
+}
+
+#endif

variants/diy/nrf52_promicro_diy_tcxo/variant.h

@@ -22,26 +22,26 @@ extern "C" {
 /*
 NRF52 PRO MICRO PIN ASSIGNMENT
 
-| Pin   | Function    |     | Pin      | Function     | RF95  |
+| Pin   | Function    |     | Pin      | Function     | RF95  |
 | ----- | ----------- | --- | -------- | ------------ | ----- |
-| Gnd   |             |     | vbat     |              |       |
-| P0.06 | Serial2 RX  |     | vbat     |              |       |
-| P0.08 | Serial2 TX  |     | Gnd      |              |       |
-| Gnd   |             |     | reset    |              |       |
-| Gnd   |             |     | ext_vcc  | *see 0.13    |       |
-| P0.17 | RXEN        |     | P0.31    | BATTERY_PIN  |       |
-| P0.20 | GPS_RX      |     | P0.29    | BUSY         | DIO0  |
-| P0.22 | GPS_TX      |     | P0.02    | MISO         | MISO  |
-| P0.24 | GPS_EN      |     | P1.15    | MOSI         | MOSI  |
-| P1.00 | BUTTON_PIN  |     | P1.13    | CS           | CS    |
-| P0.11 | SCL         |     | P1.11    | SCK          | SCK   |
-| P1.04 | SDA         |     | P0.10    | DIO1/IRQ     | DIO1  |
-| P1.06 | Free pin    |     | P0.09    | RESET        | RST   |
-|       |             |     |          |              |       |
-|       | Mid board   |     |          | Internal     |       |
-| P1.01 | Free pin    |     | 0.15     | LED          |       |
-| P1.02 | Free pin    |     | 0.13     | 3V3_EN       |       |
-| P1.07 | Free pin    |     |          |              |       |
+| Gnd   |             |     | vbat     |              |       |
+| P0.06 | Serial2 RX  |     | vbat     |              |       |
+| P0.08 | Serial2 TX  |     | Gnd      |              |       |
+| Gnd   |             |     | reset    |              |       |
+| Gnd   |             |     | ext_vcc  | *see 0.13    |       |
+| P0.17 | RXEN        |     | P0.31    | BATTERY_PIN  |       |
+| P0.20 | GPS_RX      |     | P0.29    | BUSY         | DIO0  |
+| P0.22 | GPS_TX      |     | P0.02    | MISO         | MISO  |
+| P0.24 | GPS_EN      |     | P1.15    | MOSI         | MOSI  |
+| P1.00 | BUTTON_PIN  |     | P1.13    | CS           | CS    |
+| P0.11 | SCL         |     | P1.11    | SCK          | SCK   |
+| P1.04 | SDA         |     | P0.10    | DIO1/IRQ     | DIO1  |
+| P1.06 | Free pin    |     | P0.09    | RESET        | RST   |
+|       |             |     |          |              |       |
+|       | Mid board   |     |          | Internal     |       |
+| P1.01 | Free pin    |     | 0.15     | LED          |       |
+| P1.02 | Free pin    |     | 0.13     | 3V3_EN       |       |
+| P1.07 | Free pin    |     |          |              |       |
 */
 
 // Number of pins defined in PinDescription array
@@ -185,6 +185,12 @@ settings.
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
 
+// E-Ink DIY
+#define PIN_EINK_CS (32 + 7)
+#define PIN_EINK_DC (32 + 2)
+#define PIN_EINK_RES (32 + 1)
+#define PIN_EINK_BUSY (32 + 6)
+
 #ifdef __cplusplus
 }
 #endif

variants/diy/platformio.ini

@@ -68,6 +68,27 @@ lib_deps =
   ${nrf52840_base.lib_deps}
 debug_tool = jlink
 
+; NRF52 ProMicro w/ E-Ink display
+[env:nrf52_promicro_diy-inkhud]
+board_level = extra
+extends = nrf52840_base, inkhud
+board = promicro-nrf52840
+build_flags =
+  ${nrf52840_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/diy/nrf52_promicro_diy_tcxo
+  -D NRF52_PROMICRO_DIY
+build_src_filter =
+  ${nrf52_base.build_src_filter}
+  ${inkhud.build_src_filter}
+  +<../variants/diy/nrf52_promicro_diy_tcxo>
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${nrf52840_base.lib_deps}
+extra_scripts =
+  ${env.extra_scripts}
+  variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
+
 ; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY
 [env:seeed-xiao-nrf52840-wio-sx1262]
 board = xiao_ble_sense

variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.cpp

@@ -52,4 +52,11 @@ const uint32_t g_ADigitalPinMap[] = {
 
     // VBAT
     31, // D32 is P0.10 (VBAT)
-};
+};
+
+void initVariant()
+{
+    // Set BQ25101 ISET to 100mA instead of 50mA
+    pinMode(HICHG, OUTPUT);
+    digitalWrite(HICHG, LOW);
+}

variants/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h

@@ -164,7 +164,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
 // -------
 // P0_14 = 14  Reads battery voltage from divider on signal board.
 // PIN_VBAT is reading voltage divider on XIAO and is program pin 32 / or P0.31
-#define BAT_READ 14
+#define ADC_CTRL VBAT_ENABLE
+#define ADC_CTRL_ENABLED LOW
 #define BATTERY_SENSE_RESOLUTION_BITS 10
 #define CHARGE_LED 23 // P0_17 = 17  D23   YELLOW CHARGE LED
 #define HICHG 22      // P0_13 = 13  D22   Charge-select pin for Lipo for 100 mA instead of default 50mA charge

variants/elecrow_panel/platformio.ini

@@ -48,7 +48,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
   hideakitai/TCA9534@0.1.1
 
-[crowpanel_small] ; 2.4, 2.8, 3.5 inch
+[crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
 extends = crowpanel_base
 build_flags =
   ${crowpanel_base.build_flags}
@@ -62,7 +62,7 @@ build_flags =
   -D VIEW_320x240
   -D MAP_FULL_REDRAW
 
-[crowpanel_large] ; 4.3, 5.0, 7.0 inch
+[crowpanel_large_esp32s3_base] ; 4.3, 5.0, 7.0 inch
 extends = crowpanel_base
 build_flags =
   ${crowpanel_base.build_flags}
@@ -73,9 +73,9 @@ build_flags =
   -D DISPLAY_SET_RESOLUTION
 
 [env:elecrow-adv-24-28-tft]
-extends = crowpanel_small
+extends = crowpanel_small_esp32s3_base
 build_flags =
-  ${crowpanel_small.build_flags}
+  ${crowpanel_small_esp32s3_base.build_flags}
   -D SPI_FREQUENCY=80000000
   -D LGFX_SCREEN_WIDTH=240
   -D LGFX_SCREEN_HEIGHT=320
@@ -96,9 +96,9 @@ build_flags =
   -D LGFX_TOUCH_ROTATION=0
 
 [env:elecrow-adv-35-tft]
-extends = crowpanel_small
+extends = crowpanel_small_esp32s3_base
 build_flags =
-  ${crowpanel_small.build_flags}
+  ${crowpanel_small_esp32s3_base.build_flags}
   -D LV_CACHE_DEF_SIZE=2097152
   -D SPI_FREQUENCY=60000000
   -D LGFX_SCREEN_WIDTH=320
@@ -122,7 +122,7 @@ build_flags =
 
 ; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
 [env:elecrow-adv1-43-50-70-tft]
-extends = crowpanel_large
+extends = crowpanel_large_esp32s3_base
 build_flags =
-  ${crowpanel_large.build_flags}
+  ${crowpanel_large_esp32s3_base.build_flags}
   -D VIEW_320x240

variants/gat562_mesh_trial_tracker/platformio.ini

@@ -0,0 +1,13 @@
+; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
+[env:gat562_mesh_trial_tracker]
+extends = nrf52840_base
+board = gat562_mesh_trial_tracker
+board_check = true
+build_flags = ${nrf52840_base.build_flags} -Ivariants/gat562_mesh_trial_tracker -D GAT562_MESH_TRIAL_TRACKER
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/gat562_mesh_trial_tracker>
+lib_deps = 
+  ${nrf52840_base.lib_deps}

variants/gat562_mesh_trial_tracker/variant.cpp

@@ -0,0 +1,45 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    // 3V3 Power Rail
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/gat562_mesh_trial_tracker/variant.h

@@ -0,0 +1,288 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_GAT562_MESH_TRIAL_TRACKER_
+#define _VARIANT_GAT562_MESH_TRIAL_TRACKER_
+
+#define GAT562_MESH_TRIAL_TRACKER
+
+// led pin 2 (blue), see https://github.com/meshtastic/firmware/blob/master/src/mesh/NodeDB.cpp#L723
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (35)
+#define PIN_LED2 (36)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+/*
+ * Buttons
+ */
+
+#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
+#define BUTTON_NEED_PULLUP
+#define PIN_BUTTON2 12
+#define PIN_BUTTON3 24
+#define PIN_BUTTON4 25
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (5)
+#define PIN_A1 (31)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+static const uint8_t A6 = PIN_A6;
+static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (15)
+#define PIN_SERIAL1_TX (16)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+#define PIN_SPI1_MISO (29) // (0 + 29)
+#define PIN_SPI1_MOSI (30) // (0 + 30)
+#define PIN_SPI1_SCK (3)   // (0 + 3)
+
+static const uint8_t SS = 42;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * eink display pins
+ */
+
+// #define PIN_EINK_CS (0 + 26)
+// #define PIN_EINK_BUSY (0 + 4)
+// #define PIN_EINK_DC (0 + 17)
+// #define PIN_EINK_RES (-1)
+// #define PIN_EINK_SCLK (0 + 3)
+// #define PIN_EINK_MOSI (0 + 30) // also called SDI
+
+// #define USE_EINK
+
+// Display - OLED connected via I2C
+#define HAS_SCREEN 1
+#define USE_SSD1306
+
+// RAKRGB
+// #define HAS_NCP5623
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (13)
+#define PIN_WIRE_SCL (14)
+
+// QSPI Pins
+#define PIN_QSPI_SCK 3
+#define PIN_QSPI_CS 26
+#define PIN_QSPI_IO0 30
+#define PIN_QSPI_IO1 29
+#define PIN_QSPI_IO2 28
+#define PIN_QSPI_IO3 2
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES IS25LP080D
+#define EXTERNAL_FLASH_USE_QSPI
+
+/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
+   RAK5005-O <->  nRF52840
+   IO1       <->  P0.17 (Arduino GPIO number 17)
+   IO2       <->  P1.02 (Arduino GPIO number 34)
+   IO3       <->  P0.21 (Arduino GPIO number 21)
+   IO4       <->  P0.04 (Arduino GPIO number 4)
+   IO5       <->  P0.09 (Arduino GPIO number 9)
+   IO6       <->  P0.10 (Arduino GPIO number 10)
+   IO7       <->  P0.28 (Arduino GPIO number 28)
+   SW1       <->  P0.01 (Arduino GPIO number 1)
+   A0        <->  P0.04/AIN2 (Arduino Analog A2
+   A1        <->  P0.31/AIN7 (Arduino Analog A7
+   SPI_CS    <->  P0.26 (Arduino GPIO number 26)
+ */
+
+// RAK4630 LoRa module
+
+/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
+
+P1.10   NSS     SPI NSS (Arduino GPIO number 42)
+P1.11   SCK     SPI CLK (Arduino GPIO number 43)
+P1.12   MOSI    SPI MOSI (Arduino GPIO number 44)
+P1.13   MISO    SPI MISO (Arduino GPIO number 45)
+P1.14   BUSY    BUSY signal (Arduino GPIO number 46)
+P1.15   DIO1    DIO1 event interrupt (Arduino GPIO number 47)
+P1.06   NRESET  NRESET manual reset of the SX1262 (Arduino GPIO number 38)
+
+Important for successful SX1262 initialization:
+
+* Setup DIO2 to control the antenna switch
+* Setup DIO3 to control the TCXO power supply
+* Setup the SX1262 to use it's DCDC regulator and not the LDO
+* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
+control of the antenna switch
+
+SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
+
+*/
+
+// configure the SET pin on the RAK12039 sensor board to disable the sensor while not reading
+// air quality telemetry.  PIN_NFC2 doesn't seem to be used anywhere else in the codebase, but if
+// you're having problems with your node behaving weirdly when a RAK12039 board isn't connected,
+// try disabling this.
+// #define PMSA003I_ENABLE_PIN PIN_NFC2
+
+// #define DETECTION_SENSOR_EN 4
+
+#define USE_SX1262
+#define SX126X_CS (42)
+#define SX126X_DIO1 (47)
+#define SX126X_BUSY (46)
+#define SX126X_RESET (38)
+// #define SX126X_TXEN (39)
+// #define SX126X_RXEN (37)
+#define SX126X_POWER_EN (37)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Testing USB detection
+#define NRF_APM
+
+// enables 3.3V periphery like GPS or IO Module
+// Do not toggle this for GPS power savings
+#define PIN_3V3_EN (34)
+
+// RAK1910 GPS module
+// If using the wisblock GPS module and pluged into Port A on WisBlock base
+// IO1 is hooked to PPS (pin 12 on header) = gpio 17
+// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
+// Therefore must be 1 to keep peripherals powered
+// Power is on the controllable 3V3_S rail
+// #define PIN_GPS_RESET (34)
+// #define PIN_GPS_EN PIN_3V3_EN
+#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
+
+#define GPS_BAUDRATE 9600
+
+#define GPS_RX_PIN PIN_SERIAL1_RX
+#define GPS_TX_PIN PIN_SERIAL1_TX
+
+// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
+
+// RAK12002 RTC Module
+// #define RV3028_RTC (uint8_t)0b1010010
+
+// RAK18001 Buzzer in Slot C
+// #define PIN_BUZZER 21 // IO3 is PWM2
+// NEW: set this via protobuf instead!
+
+// Battery
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_A0
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+// #define HAS_RTC 1
+
+// #define HAS_ETHERNET 1
+
+// #define RAK_4631 1
+
+// #define PIN_ETHERNET_RESET 21
+// #define PIN_ETHERNET_SS PIN_EINK_CS
+// #define ETH_SPI_PORT SPI1
+// #define AQ_SET_PIN 10
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/heltec_mesh_node_t114-inkhud/custom_build_tasks.py

@@ -0,0 +1,62 @@
+# Simplifies DIY InkHUD builds, with presets for several common E-Ink displays
+# - build using custom task in Platformio's "Project Tasks" panel
+# - build with `pio run -e <variant> -t build_weact_154` (or similar)
+
+# Silence trunk's objections to the import statements
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821)
+
+from SCons.Script import COMMAND_LINE_TARGETS
+
+Import("env")
+Import("projenv")
+
+# Custom targets
+# These wrappers just run the normal build task under a different target name
+# We intercept the build later on, based on the target name
+env.AddTarget(
+    name="build_weact_154",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 1.54")',
+)
+env.AddTarget(
+    name="build_weact_213",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 2.13")',
+)
+env.AddTarget(
+    name="build_weact_290",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 2.9")',
+)
+env.AddTarget(
+    name="build_weact_420",
+    dependencies=["buildprog"],
+    actions=None,
+    title='Build (WeAct 4.2")',
+)
+
+# Check whether a build was started via one of our custom targets above
+
+if "build_weact_154" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 1.54" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY200200_0154DAAMFGN"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
+
+elif "build_weact_213" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 2.13" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E0213A289"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "10"))
+
+elif "build_weact_290" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 2.9" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "ZJY128296_029EAAMFGN"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))
+
+elif "build_weact_420" in COMMAND_LINE_TARGETS:
+    print('Building for WeAct 4.2" Display')
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DRIVER", "HINK_E042A87"))
+    projenv["CPPDEFINES"].append(("INKHUD_BUILDCONF_DISPLAYRESILIENCE", "15"))

variants/heltec_mesh_node_t114-inkhud/nicheGraphics.h

@@ -0,0 +1,95 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/HINK_E0213A289.h"        // WeAct 2.13"
+#include "graphics/niche/Drivers/EInk/HINK_E042A87.h"          // WeAct 4.2"
+#include "graphics/niche/Drivers/EInk/ZJY128296_029EAAMFGN.h"  // WeAct 2.9"
+#include "graphics/niche/Drivers/EInk/ZJY200200_0154DAAMFGN.h" // WeACt 1.54"
+
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#if !defined(INKHUD_BUILDCONF_DRIVER) || !defined(INKHUD_BUILDCONF_DISPLAYRESILIENCE)
+// cppcheck-suppress preprocessorErrorDirective
+#error If not using a DIY preset, display model and resilience must be set manually
+#endif
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+    SPI1.begin();
+
+    // Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::INKHUD_BUILDCONF_DRIVER;
+    driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update.
+    inkhud->setDisplayResilience(INKHUD_BUILDCONF_DISPLAYRESILIENCE); // Suggest roughly ten
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
+    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+
+    // Init settings, and customize defaults
+    // Values ignored individually if found saved to flash
+    inkhud->persistence->settings.rotation = (driver->height > driver->width ? 1 : 0); // Rotate 90deg to landscape, if needed
+    inkhud->persistence->settings.userTiles.maxCount = 4;
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
+
+    // Pick applets
+    // Note: order of applets determines priority of "auto-show" feature
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet);
+    inkhud->addApplet("DMs", new InkHUD::DMApplet, true, false, 3);                       // Default on tile 3
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0), true, false, 2); // Default on tile 2
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true, false, 1);      // Default on tile 1
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet, true, false, 0); // Default on tile 0
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true);                        // Background
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+
+    // #0: Main User Button
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
+    buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
+    buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
+
+    buttons->start();
+}
+
+#endif

variants/heltec_mesh_node_t114-inkhud/platformio.ini

@@ -0,0 +1,19 @@
+[env:heltec-mesh-node-t114-inkhud]
+board_level = extra
+extends = nrf52840_base, inkhud
+board = heltec_mesh_node_t114
+board_check = true
+build_flags = 
+  ${nrf52840_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/heltec_mesh_node_t114-inkhud
+build_src_filter = 
+  ${nrf52_base.build_src_filter} 
+  ${inkhud.build_src_filter}
+lib_deps = 
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${nrf52840_base.lib_deps}
+  lewisxhe/PCF8563_Library@^1.0.1
+extra_scripts =
+  ${env.extra_scripts}
+  variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays

variants/heltec_mesh_node_t114-inkhud/variant.cpp

@@ -0,0 +1,38 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+}

variants/heltec_mesh_node_t114-inkhud/variant.h

@@ -0,0 +1,175 @@
+// Unlike many other InkHUD variants, this environment does require its own variant.h file
+// This is because the default T114 variant maps SPI1 pins to the optional TFT display, and those pins are not broken out
+
+#ifndef _VARIANT_HELTEC_NRF_
+#define _VARIANT_HELTEC_NRF_
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#define HELTEC_MESH_NODE_T114
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board)
+#define LED_BLUE PIN_LED1 // fake for bluefruit library
+#define LED_GREEN PIN_LED1
+#define LED_BUILTIN LED_GREEN
+#define LED_STATE_ON 0 // State when LED is lit
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 2                     // How many neopixels are connected
+#define NEOPIXEL_DATA 14                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1 (32 + 10)
+// #define PIN_BUTTON2 (0 + 18)      // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular
+// GPIO
+
+/*
+No longer populated on PCB
+*/
+#define PIN_SERIAL2_RX (0 + 9)
+#define PIN_SERIAL2_TX (0 + 10)
+//  #define PIN_SERIAL2_EN (0 + 17)
+
+/*
+ * I2C
+ */
+
+#define WIRE_INTERFACES_COUNT 2
+
+// I2C bus 0
+// Routed to footprint for PCF8563TS RTC
+// Not populated on T114 V1, maybe in future?
+#define PIN_WIRE_SDA (0 + 26) // P0.26
+#define PIN_WIRE_SCL (0 + 27) // P0.27
+
+// I2C bus 1
+// Available on header pins, for general use
+#define PIN_WIRE1_SDA (0 + 16) // P0.16
+#define PIN_WIRE1_SCL (0 + 13) // P0.13
+
+/*
+ * Lora radio
+ */
+
+#define USE_SX1262
+// #define USE_SX1268
+#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
+#define LORA_CS (0 + 24)
+#define SX126X_DIO1 (0 + 20)
+// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
+// #define SX1262_DIO3 (0 + 21)
+// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
+//    main
+// CPU?
+#define SX126X_BUSY (0 + 17)
+#define SX126X_RESET (0 + 25)
+// Not really an E22 but TTGO seems to be trying to clone that
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+/*
+ * E-Ink DIY
+ */
+#define PIN_EINK_MOSI (0 + 8) // also called SDA
+#define PIN_EINK_SCLK (0 + 7)
+#define PIN_EINK_CS (32 + 12)
+#define PIN_EINK_DC (32 + 14)
+#define PIN_EINK_RES (0 + 5)
+#define PIN_EINK_BUSY (32 + 15)
+
+/*
+ * GPS pins
+ */
+
+#define GPS_L76K
+
+// #define PIN_GPS_RESET (32 + 6) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
+#define GPS_RESET_MODE LOW
+// #define PIN_GPS_EN (21)
+#define VEXT_ENABLE (0 + 21)
+#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
+#define VEXT_ON_VALUE HIGH
+// #define GPS_EN_ACTIVE HIGH
+#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
+#define PIN_GPS_PPS (32 + 4)
+// Seems to be missing on this new board
+// #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
+#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+// For LORA, spi 0
+#define PIN_SPI_MISO (0 + 23)
+#define PIN_SPI_MOSI (0 + 22)
+#define PIN_SPI_SCK (0 + 19)
+
+#define PIN_SPI1_MISO -1
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+
+// #define PIN_PWR_EN (0 + 6)
+
+// To debug via the segger JLINK console rather than the CDC-ACM serial device
+// #define USE_SEGGER
+
+// Battery
+// The battery sense is hooked to pin A0 (4)
+// it is defined in the anlaolgue pin section of this file
+// and has 12 bit resolution
+
+#define ADC_CTRL 6
+#define ADC_CTRL_ENABLED HIGH
+#define BATTERY_PIN 4
+#define ADC_RESOLUTION 14
+
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (4.90F)
+
+#define HAS_RTC 0
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/heltec_mesh_pocket/platformio.ini

@@ -28,7 +28,7 @@ lib_deps =
   https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
 
 
-[env:heltec-mesh-pocket-inkhud-5000]
+[env:heltec-mesh-pocket-5000-inkhud]
 extends = nrf52840_base, inkhud
 board = heltec_mesh_pocket
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter}
@@ -73,7 +73,7 @@ lib_deps =
   https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
 
 
-[env:heltec-mesh-pocket-inkhud-10000]
+[env:heltec-mesh-pocket-10000-inkhud]
 extends = nrf52840_base, inkhud
 board = heltec_mesh_pocket
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_pocket> ${inkhud.build_src_filter}

variants/heltec_wireless_bridge/platformio.ini

@@ -3,4 +3,21 @@
 extends = esp32_base
 board = heltec_wifi_lora_32
 build_flags = 
-  ${esp32_base.build_flags} -D HELTEC_WIRELESS_BRIDGE -I variants/heltec_wireless_bridge
+  ${esp32_base.build_flags}
+  -I variants/heltec_wireless_bridge
+  -D HELTEC_WIRELESS_BRIDGE
+  -D BOARD_HAS_PSRAM
+  -D RADIOLIB_EXCLUDE_LR11X0=1
+  -D RADIOLIB_EXCLUDE_SX128X=1
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D MESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
+  -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL=1
+  -D MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
+  -D MESHTASTIC_EXCLUDE_GPS=1
+  -D MESHTASTIC_EXCLUDE_I2C=1
+  -D MESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -D MESHTASTIC_EXCLUDE_POWER_FSM=1
+  -D MESHTASTIC_EXCLUDE_SERIAL=1
+  -D MESHTASTIC_EXCLUDE_SCREEN=1
+  -D MESHTASTIC_EXCLUDE_WAYPOINT=1

variants/heltec_wireless_bridge/variant.h

@@ -1,29 +1,41 @@
-// the default ESP32 Pin of 15 is the Oled SCL, set to 36 and 37 and works fine.
-// Tested on Neo6m module.
+
+// updated variant 20250420 berlincount, tested with HTIT-TB
+//
+// connections in HTIT-WB
+// per https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf
+// md5: a0e6ae10ff76611aa61433366b2e4f5c  esp32_datasheet_en.pdf
+// per https://resource.heltec.cn/download/Wireless_Bridge/Schematic_Diagram_HTIT-WB_V0.2.pdf
+// md5: d5c1b0219ece347dd8cee866d7d3ab0a  Schematic_Diagram_HTIT-WB_V0.2.pdf
+
+#define NO_EXT_GPIO 1
+#define NO_GPS 1
+
+#define HAS_GPS 0 // GPS is not equipped
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
-#define GPS_RX_PIN 36
-#define GPS_TX_PIN 33
 
-#ifndef USE_JTAG  // gpio15 is TDO for JTAG, so no I2C on this board while doing jtag
-#define I2C_SDA 4 // I2C pins for this board
-#define I2C_SCL 15
-#endif
-
-#define LED_PIN 25   // If defined we will blink this LED
-#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+// Green / Lora = PIN 22 / GPIO2, Yellow / Wifi = PIN 23 / GPIO0, Blue / BLE = PIN 25 / GPIO16
+#define LED_PIN 22
+#define WIFI_LED 23
+#define BLE_LED 25
 
+// ESP32-D0WDQ6 direct pins SX1276
 #define USE_RF95
-#define LORA_DIO0 26 // a No connect on the SX1262 module
-#ifndef USE_JTAG
-#define LORA_RESET 14
-#endif
+#define LORA_DIO0 26
 #define LORA_DIO1 35
-#define LORA_DIO2 34 // Not really used
+#define LORA_DIO2 34
+#define LORA_SCK 05
+#define LORA_MISO 19
+#define LORA_MOSI 27
+#define LORA_CS 18
 
-// ratio of voltage divider = 3.20 (R1=100k, R2=220k)
-#define ADC_MULTIPLIER 3.2
+// several things are not possible with JTAG enabled
+#ifndef USE_JTAG
+#define LORA_RESET 14 // LoRa Reset shares a pin with MTMS
+#define I2C_SDA 4     // SD_DATA1 going to W25Q64, but
+#define I2C_SCL 15    // SD_CMD shared a pin with MTD0
+#endif
 
-#define BATTERY_PIN 13 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC2_GPIO13_CHANNEL
-#define BAT_MEASURE_ADC_UNIT 2
+// user button is present on device, but currently untested & unconfigured - couldn't figure out how it's connected
+
+// battery support is present within device, but currently untested & unconfigured - couldn't find reliable information yet

variants/rak4631/variant.h

@@ -219,6 +219,10 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 
 // Testing USB detection
 #define NRF_APM
+// If using a power chip like the INA3221 you can override the default battery voltage channel below
+// and comment out NRF_APM to use the INA3221 instead of the USB detection for charging
+// #define INA3221_BAT_CH INA3221_CH2
+// #define INA3221_ENV_CH INA3221_CH1
 
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings

variants/rak4631_nomadstar_meteor_pro/platformio.ini

@@ -0,0 +1,51 @@
+; NomadStar Meteor Pro based on RAK4631 with RGBW LED LP5562 support
+[env:rak4631_nomadstar_meteor_pro]
+extends = nrf52840_base
+board = wiscore_rak4631
+board_check = true
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_nomadstar_meteor_pro -D NOMADSTAR_METEOR_PRO
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  ;-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
+  -DEINK_WIDTH=250
+  -DEINK_HEIGHT=122
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_nomadstar_meteor_pro> +<mesh/api/> +<mqtt/>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/NomadStar-outdoor/IOBoard-RGB-LP5562-Library.git#9c366c8
+
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+[env:rak4631_nomadstar_meteor_pro_dbg]
+extends = env:rak4631_nomadstar_meteor_pro
+board_level = extra
+
+; if the builtin version of openocd has a buggy version of semihosting, so use the external version
+; platform_packages = platformio/tool-openocd@^3.1200.0
+
+build_flags =
+  ${env:rak4631.build_flags}
+  -D USE_SEMIHOSTING
+
+lib_deps =
+  ${env:rak4631.lib_deps}
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip
+
+; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
+; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
+;
+; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
+; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.
+
+upload_protocol = stlink
+; eventually use platformio/tool-pyocd@^2.3600.0 instad
+;upload_protocol = custom
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE

variants/rak4631_nomadstar_meteor_pro/variant.cpp

@@ -0,0 +1,45 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    // 3V3 Power Rail
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/rak4631_nomadstar_meteor_pro/variant.h

@@ -0,0 +1,271 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_RAK4630_
+#define _VARIANT_RAK4630_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (35)
+#define PIN_LED2 (36)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+/*
+ * Buttons
+ */
+
+#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
+#define BUTTON_NEED_PULLUP
+#define PIN_BUTTON2 12
+#define PIN_BUTTON3 24
+#define PIN_BUTTON4 25
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (5)
+#define PIN_A1 (31)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+static const uint8_t A6 = PIN_A6;
+static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (15)
+#define PIN_SERIAL1_TX (16)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+#define PIN_SPI1_MISO (29) // (0 + 29)
+#define PIN_SPI1_MOSI (30) // (0 + 30)
+#define PIN_SPI1_SCK (3)   // (0 + 3)
+
+static const uint8_t SS = 42;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * eink display pins
+ */
+
+#define PIN_EINK_CS (0 + 26)
+#define PIN_EINK_BUSY (0 + 4)
+#define PIN_EINK_DC (0 + 17)
+#define PIN_EINK_RES (-1)
+#define PIN_EINK_SCLK (0 + 3)
+#define PIN_EINK_MOSI (0 + 30) // also called SDI
+
+// #define USE_EINK
+
+// Texas Instrument LP5562
+#define HAS_LP5562
+#define ENABLE_AMBIENTLIGHTING
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (13)
+#define PIN_WIRE_SCL (14)
+
+// QSPI Pins
+#define PIN_QSPI_SCK 3
+#define PIN_QSPI_CS 26
+#define PIN_QSPI_IO0 30
+#define PIN_QSPI_IO1 29
+#define PIN_QSPI_IO2 28
+#define PIN_QSPI_IO3 2
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES IS25LP080D
+#define EXTERNAL_FLASH_USE_QSPI
+
+/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
+   RAK5005-O <->  nRF52840
+   IO1       <->  P0.17 (Arduino GPIO number 17)
+   IO2       <->  P1.02 (Arduino GPIO number 34)
+   IO3       <->  P0.21 (Arduino GPIO number 21)
+   IO4       <->  P0.04 (Arduino GPIO number 4)
+   IO5       <->  P0.09 (Arduino GPIO number 9)
+   IO6       <->  P0.10 (Arduino GPIO number 10)
+   IO7       <->  P0.28 (Arduino GPIO number 28)
+   SW1       <->  P0.01 (Arduino GPIO number 1)
+   A0        <->  P0.04/AIN2 (Arduino Analog A2
+   A1        <->  P0.31/AIN7 (Arduino Analog A7
+   SPI_CS    <->  P0.26 (Arduino GPIO number 26)
+ */
+
+// RAK4630 LoRa module
+
+/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
+
+P1.10   NSS     SPI NSS (Arduino GPIO number 42)
+P1.11   SCK     SPI CLK (Arduino GPIO number 43)
+P1.12   MOSI    SPI MOSI (Arduino GPIO number 44)
+P1.13   MISO    SPI MISO (Arduino GPIO number 45)
+P1.14   BUSY    BUSY signal (Arduino GPIO number 46)
+P1.15   DIO1    DIO1 event interrupt (Arduino GPIO number 47)
+P1.06   NRESET  NRESET manual reset of the SX1262 (Arduino GPIO number 38)
+
+Important for successful SX1262 initialization:
+
+* Setup DIO2 to control the antenna switch
+* Setup DIO3 to control the TCXO power supply
+* Setup the SX1262 to use it's DCDC regulator and not the LDO
+* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
+control of the antenna switch
+
+SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
+
+*/
+
+#define DETECTION_SENSOR_EN 4
+
+#define USE_SX1262
+#define SX126X_CS (42)
+#define SX126X_DIO1 (47)
+#define SX126X_BUSY (46)
+#define SX126X_RESET (38)
+// #define SX126X_TXEN (39)
+// #define SX126X_RXEN (37)
+#define SX126X_POWER_EN (37)
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Testing USB detection
+#define NRF_APM
+
+// enables 3.3V periphery like GPS or IO Module
+// Do not toggle this for GPS power savings
+#define PIN_3V3_EN (34)
+
+// RAK1910 GPS module
+// If using the wisblock GPS module and pluged into Port A on WisBlock base
+// IO1 is hooked to PPS (pin 12 on header) = gpio 17
+// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
+// Therefore must be 1 to keep peripherals powered
+// Power is on the controllable 3V3_S rail
+// #define PIN_GPS_RESET (34)
+// #define PIN_GPS_EN PIN_3V3_EN
+#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
+
+#define GPS_RX_PIN PIN_SERIAL1_RX
+#define GPS_TX_PIN PIN_SERIAL1_TX
+
+// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
+
+// RAK18001 Buzzer in Slot C
+// #define PIN_BUZZER 21 // IO3 is PWM2
+// NEW: set this via protobuf instead!
+
+// Battery
+// The battery sense is hooked to pin A0 (5)
+#define BATTERY_PIN PIN_A0
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define HAS_RTC 0
+
+#define HAS_ETHERNET 0
+
+#define RAK_4631 1
+
+#define PIN_ETHERNET_RESET 21
+#define PIN_ETHERNET_SS PIN_EINK_CS
+#define ETH_SPI_PORT SPI1
+#define AQ_SET_PIN 10
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/seeed_xiao_nrf52840_kit/variant.cpp

@@ -34,9 +34,9 @@ const uint32_t g_ADigitalPinMap[] = {
     11, // D18 is P0.11 (6D_INT1)
 
     // MIC
-    42, // 17,//42,  // D19 is P1.10 (MIC_PWR)
-    32, // 26,//32,  // D20 is P1.00 (PDM_CLK)
-    16, // 25,//16,  // D21 is P0.16 (PDM_DATA)
+    42, // D19 is P1.10 (MIC_PWR)
+    32, // D20 is P1.00 (PDM_CLK)
+    16, // D21 is P0.16 (PDM_DATA)
 
     // BQ25100
     13, // D22 is P0.13 (HICHG)
@@ -80,13 +80,17 @@ const uint32_t g_ADigitalPinMap[] = {
 
 void initVariant()
 {
-    // LED1 & LED2
-    pinMode(21, OUTPUT);
-    digitalWrite(21, LOW);
-    // LED1 & LED2
-    pinMode(22, OUTPUT);
-    digitalWrite(22, LOW);
+    // Set BQ25101 ISET to 100mA instead of 50mA
+    pinMode(HICHG, OUTPUT);
+    digitalWrite(HICHG, LOW);
 
-    pinMode(PIN_WIRE_SDA, INPUT_PULLUP);
-    pinMode(PIN_WIRE_SCL, INPUT_PULLUP);
-}
+    // LEDs
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    pinMode(PIN_LED3, OUTPUT);
+    ledOff(PIN_LED3);
+}

variants/seeed_xiao_nrf52840_kit/variant.h

@@ -19,31 +19,12 @@ extern "C" {
 
 #define PINS_COUNT (33)
 #define NUM_DIGITAL_PINS (33)
-#define NUM_ANALOG_INPUTS (8) // A6 is used for battery, A7 is analog reference
+#define NUM_ANALOG_INPUTS (8)
 #define NUM_ANALOG_OUTPUTS (0)
 
-// LEDs
-
-#define LED_RED 11
-#define LED_BLUE 12
-#define LED_GREEN 13
-
-#define PIN_LED1 LED_GREEN
-#define PIN_LED2 LED_BLUE
-#define PIN_LED3 LED_RED
-
-#define PIN_LED PIN_LED1
-#define LED_PWR (PINS_COUNT)
-
-#define LED_BUILTIN PIN_LED
-
-#define LED_STATE_ON 1 // State when LED is lit
-
 /*
- * Buttons
+ * Digital Pins
  */
-
-// Digital PINs
 #define D0 (0ul)
 #define D1 (1ul)
 #define D2 (2ul)
@@ -56,15 +37,6 @@ extern "C" {
 #define D9 (9ul)
 #define D10 (10ul)
 
-/*Due to the lack of pins,and have to make sure gps standby work well we have temporarily removed the button.
-There are some technical solutions that can solve this problem,
-and we are currently exploring and researching them*/
-
-// #define BUTTON_PIN D0 // This is the Program Button
-// // #define BUTTON_NEED_PULLUP   1
-// #define BUTTON_ACTIVE_LOW true
-// #define BUTTON_ACTIVE_PULLUP false
-
 /*
  * Analog pins
  */
@@ -85,6 +57,38 @@ static const uint8_t A4 = PIN_A4;
 static const uint8_t A5 = PIN_A5;
 #define ADC_RESOLUTION 12
 
+/*
+ * LEDs
+ */
+#define LED_STATE_ON (0) // RGB LED is common anode
+#define LED_RED (11)
+#define LED_GREEN (13)
+#define LED_BLUE (12)
+
+#define PIN_LED1 LED_GREEN // PIN_LED1 is used in src/platform/nrf52/architecture.h to define LED_PIN
+#define PIN_LED2 LED_BLUE
+#define PIN_LED3 LED_RED
+
+#define LED_BUILTIN LED_RED // LED_BUILTIN is used by framework-arduinoadafruitnrf52 to indicate flash writes
+
+#define LED_PWR LED_RED
+#define USER_LED LED_BLUE
+
+/*
+ * Buttons
+ */
+
+/*
+ *  D0 is shared with PIN_GPS_STANDBY on the L76K GNSS Module.
+ *  There are some technical solutions that can solve this problem, and we are
+ *  currently exploring and researching them.
+ */
+
+// #define BUTTON_PIN D0
+
+/*
+ * Serial Interfaces
+ */
 #define PIN_SERIAL2_RX (-1)
 #define PIN_SERIAL2_TX (-1)
 
@@ -102,11 +106,9 @@ static const uint8_t MOSI = PIN_SPI_MOSI;
 static const uint8_t MISO = PIN_SPI_MISO;
 static const uint8_t SCK = PIN_SPI_SCK;
 
-// supported modules list
 #define USE_SX1262
 
-// common pinouts for SX126X modules
-
+// Pinout for SX126X
 #define SX126X_CS D4
 #define SX126X_DIO1 D1
 #define SX126X_BUSY D3
@@ -121,43 +123,43 @@ static const uint8_t SCK = PIN_SPI_SCK;
 /*
  * Wire Interfaces
  */
-
 #define I2C_NO_RESCAN           // I2C is a bit finicky, don't scan too much
 #define WIRE_INTERFACES_COUNT 1 // 2
 
-#define PIN_WIRE_SDA (24) // change to use the correct pins if needed
-#define PIN_WIRE_SCL (25) // change to use the correct pins if needed
+// LSM6DS3TR on XIAO nRF52840 Series
+#define PIN_WIRE_SDA (17)
+#define PIN_WIRE_SCL (16)
 
 static const uint8_t SDA = PIN_WIRE_SDA;
 static const uint8_t SCL = PIN_WIRE_SCL;
 
+/*
+ * GPS
+ */
 // GPS L76KB
 #define GPS_L76K
 #ifdef GPS_L76K
 #define PIN_GPS_RX D6
 #define PIN_GPS_TX D7
 #define HAS_GPS 1
-#define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
 #define PIN_SERIAL1_RX PIN_GPS_TX
 #define PIN_SERIAL1_TX PIN_GPS_RX
 #define PIN_GPS_STANDBY D0
 #endif
 
-// Battery
+/*
+ * Battery
+ */
+#define BATTERY_PIN PIN_VBAT      // P0.31: VBAT voltage divider
+#define ADC_MULTIPLIER (3)        // ... R17=1M, R18=510k
+#define ADC_CTRL VBAT_ENABLE      // P0.14: VBAT voltage divider
+#define ADC_CTRL_ENABLED LOW      // ... sink
+#define EXT_CHRG_DETECT (23)      // P0.17: Charge LED
+#define EXT_CHRG_DETECT_VALUE LOW // ... BQ25101 ~CHG indicates charging
+#define HICHG (22)                // P0.13: BQ25101 ISET 100mA instead of 50mA
 
-#define BAT_READ                                                                                                                 \
-    14 // P0_14 = 14  Reads battery voltage from divider on signal board. (PIN_VBAT is reading voltage divider on XIAO and is
-       // program pin 32 / or P0.31)
-#define BATTERY_SENSE_RESOLUTION_BITS 10
-#define CHARGE_LED 23 // P0_17 = 17  D23   YELLOW CHARGE LED
-#define HICHG 22      // P0_13 = 13  D22   Charge-select pin for Lipo for 100 mA instead of default 50mA charge
-
-// The battery sense is hooked to pin A0 (5)
-#define BATTERY_PIN PIN_VBAT // PIN_A0
-
-// ratio of voltage divider = 3.0 (R17=1M, R18=510k)
-#define ADC_MULTIPLIER 3 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS (10)
 
 #ifdef __cplusplus
 }

variants/t-deck/platformio.ini

@@ -67,7 +67,9 @@ build_flags =
 ;	-D USE_DOUBLE_BUFFER
   -D USE_PACKET_API
   -D MAP_FULL_REDRAW
+  -D CUSTOM_TOUCH_DRIVER
 
 lib_deps =
   ${env:t-deck.lib_deps}
   ${device-ui_base.lib_deps}
+  https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip

variants/xiao_ble/variant.cpp

@@ -52,4 +52,11 @@ const uint32_t g_ADigitalPinMap[] = {
 
     // VBAT
     31, // D32 is P0.10 (VBAT)
-};
+};
+
+void initVariant()
+{
+    // Set BQ25101 ISET to 100mA instead of 50mA
+    pinMode(HICHG, OUTPUT);
+    digitalWrite(HICHG, LOW);
+}

variants/xiao_ble/variant.h

@@ -189,9 +189,8 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 
 // Battery
 
-#define BAT_READ                                                                                                                 \
-    14 // P0_14 = 14  Reads battery voltage from divider on signal board. (PIN_VBAT is reading voltage divider on XIAO and is
-       // program pin 32 / or P0.31)
+#define ADC_CTRL VBAT_ENABLE // P0.14: VBAT voltage divider
+#define ADC_CTRL_ENABLED LOW // ... sink
 #define BATTERY_SENSE_RESOLUTION_BITS 10
 #define CHARGE_LED 23 // P0_17 = 17  D23   YELLOW CHARGE LED
 #define HICHG 22      // P0_13 = 13  D22   Charge-select pin for Lipo for 100 mA instead of default 50mA charge

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 6
-build = 10
+build = 12