Update architecture.h

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/actions/build-variant/action.yml

@@ -27,10 +27,10 @@ inputs:
     description: A newline separated list of paths to store as artifacts
     required: false
     default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
+  # include-web-ui:
+  #   description: Include the web UI in the build
+  #   required: false
+  #   default: "false"
   arch:
     description: Processor arch name
     required: true
@@ -43,29 +43,29 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
-      id: webver
-      shell: bash
-      run: |
-        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
+    # - name: Get web ui version
+    #   if: inputs.include-web-ui == 'true'
+    #   id: webver
+    #   shell: bash
+    #   run: |
+    #     echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
 
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v${{ steps.webver.outputs.ver }}
+    # - name: Pull web ui
+    #   if: inputs.include-web-ui == 'true'
+    #   uses: dsaltares/fetch-gh-release-asset@master
+    #   with:
+    #     repo: meshtastic/web
+    #     file: build.tar
+    #     target: build.tar
+    #     token: ${{ inputs.github_token }}
+    #     version: tags/v${{ steps.webver.outputs.ver }}
 
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
+    # - name: Unpack web ui
+    #   if: inputs.include-web-ui == 'true'
+    #   shell: bash
+    #   run: |
+    #     tar -xf build.tar -C data/static
+    #     rm build.tar
 
     - name: Remove debug flags for release
       shell: bash

.github/pull_request_template.md

@@ -1,6 +1,7 @@
 ## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -15,8 +16,8 @@
 - If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
 
-
 ## 🤝 Attestations
+
 - [ ] I have tested that my proposed changes behave as described.
 - [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
   - [ ] Heltec (Lora32) V3

.github/workflows/build_esp32.yml

@@ -1,37 +0,0 @@
-name: Build ESP32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-S3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-s3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_firmware.yml

@@ -0,0 +1,66 @@
+name: Build
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      platform:
+        required: true
+        type: string
+      pio_env:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  pio-build:
+    name: build-${{ inputs.platform }}
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Set OTA firmware source and target
+        if: startsWith(inputs.platform, 'esp32')
+        id: ota_dir
+        env:
+          PIO_PLATFORM: ${{ inputs.platform }}
+        run: |
+          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
+            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
+            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
+          elif [ "$PIO_PLATFORM" = "esp32" ]; then
+            echo "src=firmware.bin" >> $GITHUB_OUTPUT
+            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
+          fi
+
+      - name: Build ${{ inputs.platform }}
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: ${{ inputs.platform }}
+          pio_env: ${{ inputs.pio_env }}
+          pio_target: build
+          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
+          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf
+            release/*.uf2
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -1,30 +0,0 @@
-name: Build NRF52
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-nrf52:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.uf2
-            release/*.elf
-            release/*.zip
-          arch: nrf52840

.github/workflows/build_rpi2040.yml

@@ -1,28 +0,0 @@
-name: Build RPI2040
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-rpi2040:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
-            release/*.uf2
-            release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -1,29 +0,0 @@
-name: Build STM32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-stm32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -1,7 +1,7 @@
 name: Daily Packaging
 on:
   schedule:
-    - cron: 0 9 * * *
+    - cron: 0 2 * * *
   workflow_dispatch:
   push:
     branches:
@@ -30,7 +30,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/main_matrix.yml

@@ -30,18 +30,31 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
-    runs-on: ubuntu-latest
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - check
+    runs-on: ubuntu-24.04
     steps:
-      - id: checkout
-        uses: actions/checkout@v4
-        name: Checkout base
-      - id: jsonStep
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -52,9 +65,25 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
   check:
     needs: setup
     strategy:
@@ -72,69 +101,95 @@ jobs:
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_esp32.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32
 
-  build-esp32-s3:
-    needs: setup
+  build-esp32s3:
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_esp32_s3.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32s3
 
-  build-esp32-c3:
-    needs: setup
+  build-esp32c3:
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_esp32_c3.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32c3
 
-  build-esp32-c6:
-    needs: setup
+  build-esp32c6:
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: esp32c6
 
-  build-nrf52:
-    needs: setup
+  build-nrf52840:
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_nrf52.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: nrf52840
 
-  build-rpi2040:
-    needs: setup
+  build-rp2040:
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_rpi2040.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: rp2040
+
+  build-rp2350:
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: rp2350
 
   build-stm32:
-    needs: setup
+    needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_stm32.yml
+    uses: ./.github/workflows/build_firmware.yml
     with:
-      board: ${{ matrix.board }}
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.board }}
+      platform: stm32
 
   build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/build_debian_src.yml
     with:
       series: UNRELEASED
@@ -209,16 +264,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-latest
     needs:
       [
+        version,
         build-esp32,
-        build-esp32-s3,
-        build-esp32-c3,
-        build-esp32-c6,
-        build-nrf52,
-        build-rpi2040,
+        build-esp32s3,
+        build-esp32c3,
+        build-esp32c6,
+        build-nrf52840,
+        build-rp2040,
+        build-rp2350,
         build-stm32,
       ]
     steps:
@@ -237,17 +302,13 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -257,14 +318,13 @@ jobs:
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -278,12 +338,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -291,8 +351,8 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
@@ -301,6 +361,7 @@ jobs:
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
+      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
@@ -313,44 +374,36 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
-          tag_name: v${{ steps.version.outputs.long }}
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
         uses: actions/download-artifact@v4
         with:
-          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
         uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -360,8 +413,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -369,10 +422,18 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
+    needs: [release-artifacts, version]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -382,13 +443,9 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
       - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -401,16 +458,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -420,17 +477,18 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware]
+    needs: [release-firmware, version]
     env:
-      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -440,13 +498,9 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
       - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -460,9 +514,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ steps.version.outputs.long }}
+          commit_message: ${{ needs.version.outputs.long }}
           enable_jekyll: true

.github/workflows/nightly.yml

@@ -8,6 +8,7 @@ permissions: read-all
 
 jobs:
   trunk_check:
+    if: github.repository == 'meshtastic/firmware'
     name: Trunk Check and Upload
     runs-on: ubuntu-24.04
 
@@ -21,6 +22,7 @@ jobs:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
 
   trunk_upgrade:
+    if: github.repository == 'meshtastic/firmware'
     # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
     name: Trunk Upgrade (PR)
     runs-on: ubuntu-24.04

.github/workflows/pr_enforce_labels.yml

@@ -0,0 +1,24 @@
+name: Check PR Labels
+
+on:
+  pull_request:
+    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
+
+permissions:
+  pull-requests: read
+  contents: read
+
+jobs:
+  check-label:
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Check for PR labels
+        uses: actions/github-script@v7
+        with:
+          script: |
+            const labels = context.payload.pull_request.labels.map(label => label.name);
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
+            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
+            if (!hasRequiredLabel) {
+              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
+            }

.github/workflows/release_channels.yml

@@ -20,7 +20,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          # - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -98,8 +102,10 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
+          branch: create-pull-request/bump-version
+          labels: github_actions
           title: Bump release version
-          commit-message: automated bumps
+          commit-message: Automated version bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,6 +13,7 @@ permissions:
 
 jobs:
   semgrep-full:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep

.github/workflows/stale_bot.yml

@@ -11,6 +11,7 @@ permissions:
 
 jobs:
   stale_issues:
+    if: github.repository == 'meshtastic/firmware'
     name: Close Stale Issues
     runs-on: ubuntu-latest
 

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -12,9 +12,11 @@ permissions:
 
 jobs:
   native-tests:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: test-runner
     steps:
       - name: Checkout code

.github/workflows/update_protobufs.yml

@@ -33,7 +33,10 @@ jobs:
       - name: Create pull request
         uses: peter-evans/create-pull-request@v7
         with:
+          branch: create-pull-request/update-protobufs
+          labels: submodules
           title: Update protobufs and classes
+          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -38,3 +38,6 @@ release/
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
 src/mesh/raspihttp/private_key.pem
+
+# Ignore logo (set at build time with platformio-custom.py)
+data/boot/logo.*

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.0
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.435
-    - renovate@40.34.4
-    - prettier@3.5.3
-    - trufflehog@3.88.34
+    - checkov@3.2.451
+    - renovate@41.40.0
+    - prettier@3.6.2
+    - trufflehog@3.90.1
     - yamllint@1.37.1
-    - bandit@1.8.3
-    - trivy@0.62.1
+    - bandit@1.8.6
+    - trivy@0.64.1
     - taplo@0.9.3
-    - ruff@0.11.11
+    - ruff@0.12.4
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
-    - svgo@3.3.2
+    - svgo@4.0.0
     - actionlint@1.7.7
-    - flake8@7.2.0
+    - flake8@7.3.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.26.0
+    - gitleaks@8.28.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

alpine.Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
+FROM python:3.13-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
@@ -27,7 +27,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

arch/esp32/esp32.ini

@@ -4,7 +4,7 @@ extends = arduino_base
 custom_esp32_kind = esp32
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.10.0
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -49,13 +49,13 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/622341c6de8a239704318b10c3dbb00c21a3eab3.zip
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -30,6 +30,8 @@ lib_deps =
   lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
+	adafruit/Adafruit seesaw Library@1.7.9
 
 build_flags =
   ${arduino_base.build_flags}
@@ -37,7 +39,7 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
+  -DHAS_UDP_MULTICAST=1
   -lpthread
   -lstdc++fs
   -lbluetooth
@@ -48,4 +50,7 @@ build_flags =
   -std=gnu17
   -std=c++17
 
-lib_ignore = Adafruit NeoPixel
+lib_ignore =
+  Adafruit NeoPixel
+  Adafruit ST7735 and ST7789 Library
+  SD

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.1.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -16,18 +16,27 @@ build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-  -DMESHTASTIC_EXCLUDE_INPUTBROKER
-  -DMESHTASTIC_EXCLUDE_I2C
-  -DMESHTASTIC_EXCLUDE_POWERMON
-  -DMESHTASTIC_EXCLUDE_SCREEN
-  -DMESHTASTIC_EXCLUDE_MQTT
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_GPS
-  ;-DDEBUG_MUTE
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_ATAK=1 ; ATAK is quite big, disable it for big flash savings.
+  -DMESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
+  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
+  -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
+  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -39,9 +48,9 @@ debug_tool = stlink
 lib_deps =
   ${env.lib_deps}
   ${radiolib_base.lib_deps}
+
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
-  Wire
+  OneButton

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -34,11 +34,12 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
-# Remove webserver files from the filesystem and rebuild
-ls -l data/static # Diagnostic list of files
-rm -rf data/static
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
 pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR

bin/build-firmware.sh

@@ -11,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rpi2040.sh $1
+  bin/build-rp2xx0.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/build-native.sh

@@ -25,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment "$PIO_ENV" || platformioFailed
+pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
 cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rp2xx0.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32wl.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -96,9 +96,9 @@ Lora:
 ### Some devices, like the pinedio, may require spidev0.1 as a workaround.
 #  spidev: spidev0.0
 
-### Define GPIO buttons here:
+### Deprecated location for User Button:
 
-GPIO:
+#GPIO:
 #  User: 6
 
 ### Define GPS
@@ -115,17 +115,6 @@ I2C:
 
 Display:
 
-### Waveshare 1.44inch LCD HAT
-#  Panel: ST7735S
-#  CS: 8         #Chip Select
-#  DC: 25        # Data/Command pin
-#  Backlight: 24
-#  Width: 128
-#  Height: 128
-#  Reset: 27
-#  OffsetX: 0
-#  OffsetY: 0
-
 ### Adafruit PiTFT 2.8 TFT+Touchscreen
 #  Panel: ILI9341
 #  CS: 8
@@ -180,6 +169,16 @@ Input:
 
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
+### Standard User Button Config
+#  UserButton: 6
+
+### Trackball/Joystick input
+#  TrackballUp: 6
+#  TrackballDown: 19
+#  TrackballLeft: 5
+#  TrackballRight: 26
+#  TrackballPress: 13
+
 ###
 
 Logging:
@@ -200,6 +199,10 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
 
 
+Config:
+#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
+#  DisplayMode: COLOR # uncomment to force MUI
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100

bin/config.d/display-waveshare-1-44.yaml

@@ -0,0 +1,26 @@
+### Waveshare 1.44inch LCD HAT
+Display:
+  Panel: ST7735S
+  spidev: spidev0.0  # Specify either the spidev here, or the CS below
+#  CS: 8         #Chip Select # Optional, as this is the default pin for spidev0.0
+  DC: 25        # Data/Command pin
+  Backlight: 24
+  Width: 128
+  Height: 128
+  Reset: 27
+  OffsetX: 2
+  OffsetY: 1
+
+
+#  OffsetY: 31  # These two options are used to properly flip the screen 180 degrees
+#  OffsetRotate: 3
+
+
+Input:
+  TrackballUp: 6
+  TrackballDown: 19
+  TrackballLeft: 5
+  TrackballRight: 26
+  TrackballPress: 13
+  TrackballDirection: FALLING
+#  User: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -6,6 +6,6 @@ Lora:
   IRQ: 16
   Busy: 20
   Reset: 24
-  TXen: 13
+  RXen: 12
   DIO2_AS_RF_SWITCH: true
   DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -0,0 +1,52 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+#
+# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
+#
+# Pin Connection
+# Waveshare       Orange Pi Zero3
+#   36    3.3V        17
+#   15    MOSI        19
+#   16    MISO        21  
+#   14    CLK         23
+#   38    GND         25
+#   4     BUSY        18
+#   20    RESET       22
+#   5     CS          24
+#   26    DIO1/IRQ    26
+
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pico Lora module
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  # Specify either the spidev1_1 or the CS below, not both!
+  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
+  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
+#  CS:             # CS     PIN_24 -> chip 1, line 233
+#    pin: 24
+#    gpiochip: 1
+#    line: 233
+  SCK:            # SCK     PIN_23 -> chip 1, line 230
+    pin: 23
+    gpiochip: 1
+    line: 230
+  Busy:           # BUSY    PIN_18 -> chip 1, line 78
+    pin: 18
+    gpiochip: 1
+    line: 78
+  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
+    pin: 19
+    gpiochip: 1
+    line: 231
+  MISO:           # MISO    PIN_21 -> chip 1, line 232
+    pin: 21
+    gpiochip: 1
+    line: 232
+  Reset:          # NRST    PIN_22 -> chip 1, line 71
+    pin: 22
+    gpiochip: 1
+    line: 71
+  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
+    pin: 26
+    gpiochip: 1
+    line: 74

bin/device-install.bat

@@ -5,13 +5,13 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
-SET "WEB_APP=0"
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
 SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
@@ -24,7 +24,7 @@ GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
@@ -34,14 +34,16 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -57,11 +59,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -95,6 +99,9 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -133,13 +140,16 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 @REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
 IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
     SET "TFT_BUILD=1"
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
@@ -193,13 +203,8 @@ SET "OTA_FILENAME=bleota.bin"
 :end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
-IF %WEB_APP% EQU 1 (
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
-    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
+@REM Set SPIFFS filename with "littlefs-" prefix.
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
 @REM Default offsets.
@@ -254,6 +259,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-install.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
+BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
@@ -34,6 +34,9 @@ BIGDB_16MB=(
 	"station-g2"
     "t-eth-elite"
     "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -72,14 +75,14 @@ set -e
 # Usage info
 show_help() {
     cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--1200bps-reset]
 Flash image file to device, but first erasing and writing system information.
 
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
@@ -102,8 +105,8 @@ while [ $# -gt 0 ]; do
         FILENAME="$2"
         shift
         ;;
-	--web)
-		WEB_APP=true
+    --1200bps-reset)
+		    BPS_RESET=true
 		    ;;
     --) # Stop parsing options
         shift
@@ -117,30 +120,31 @@ while [ $# -gt 0 ]; do
     shift # Move to the next argument
 done
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-	FILENAME=$1
+if [[ $BPS_RESET == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	exit 0
+fi
+
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
   echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
     TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
 BASENAME="${FILENAME/firmware-/}"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
+    # Default littlefs* offset.
     OFFSET=0x300000
 
     # Default OTA Offset
@@ -180,22 +184,18 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         OTAFILE=bleota-s3.bin
     fi
 
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
+    # Set SPIFFS filename with "littlefs-" prefix.
     SPIFFSFILE=littlefs-${BASENAME}
-	fi
 
-	if [[ ! -f $FILENAME ]]; then
+    if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."
         exit 1
     fi
-	if [[ ! -f $OTAFILE ]]; then
+    if [[ ! -f "$OTAFILE" ]]; then
         echo "Error: file ${OTAFILE} wasn't found. Terminating."
         exit 1
     fi
-	if [[ ! -f $SPIFFSFILE ]]; then
+    if [[ ! -f "$SPIFFSFILE" ]]; then
         echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
         exit 1
     fi

bin/device-update.bat

@@ -8,12 +8,13 @@ SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but leave existing system intact.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
@@ -23,12 +24,15 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -44,10 +48,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -77,6 +84,9 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -115,6 +125,12 @@ IF "__!ESPTOOL_PORT!__" == "____" (
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
 CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
@@ -135,6 +151,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-update.sh

@@ -1,6 +1,7 @@
-#!/bin/sh
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,17 +18,29 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
 
+# Check for --change-mode and remove it from arguments
+NEW_ARGS=()
+for arg in "$@"; do
+    if [ "$arg" = "--change-mode" ]; then
+        CHANGE_MODE=true
+    else
+        NEW_ARGS+=("$arg")
+    fi
+done
+
+set -- "${NEW_ARGS[@]}"
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in
@@ -50,14 +63,19 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
+if [ "$CHANGE_MODE" = true ]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    echo "Trying to flash update ${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -2,13 +2,11 @@
 
 """Generate the CI matrix."""
 
-import configparser
 import json
-import os
 import sys
 import random
-
-rootdir = "variants/"
+import re
+from platformio.project.config import ProjectConfig
 
 options = sys.argv[1:]
 
@@ -16,36 +14,59 @@ outlist = []
 
 if len(options) < 1:
   print(json.dumps(outlist))
-    exit()
+  exit(1)
 
-for subdir, dirs, files in os.walk(rootdir):
-    for file in files:
-        if file == "platformio.ini":
-            config = configparser.ConfigParser()
-            config.read(subdir + "/" + file)
-            for c in config.sections():
-                if c.startswith("env:"):
-                    section = config[c].name[4:]
-                    if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
-                            if "board_level" in config[config[c].name]:
-                                if (
-                                    config[config[c].name]["board_level"] == "extra"
-                                ) & ("extra" in options):
-                                    outlist.append(section)
+cfg = ProjectConfig.get_instance()
+pio_envs = cfg.envs()
+
+# Gather all PlatformIO environments for filtering later
+all_envs = []
+for pio_env in pio_envs:
+  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
+  env_platform = None
+  for flag in env_build_flags:
+    # Extract the platform from the build flags
+    # Example flag: -I variants/esp32s3/heltec-v3
+    match = re.search(r"-I\s?variants/([^/]+)", flag)
+    if match:
+      env_platform = match.group(1)
+      break
+  # Intentionally fail if platform cannot be determined
+  if not env_platform:
+    print(f"Error: Could not determine platform for environment '{pio_env}'")
+    exit(1)
+  # Store env details as a dictionary, and add to 'all_envs' list
+  env = {
+    'name': pio_env,
+    'platform': env_platform,
+    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
+    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
+  }
+  all_envs.append(env)
+
+# Filter outputs based on options
+# Check is mutually exclusive with other options (except 'pr')
+if "check" in options:
+  for env in all_envs:
+    if env['board_check']:
+      if "pr" in options:
+        if env['board_level'] == 'pr':
+          outlist.append(env['name'])
       else:
-                                outlist.append(section)
-                        # Add the TFT variants if the base variant is selected
-                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
-                            outlist.append(section)
-                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
-                            outlist.append(section)
-                    if "board_check" in config[config[c].name]:
-                        if (config[config[c].name]["board_check"] == "true") & (
-                            "check" in options
-                        ):
-                            outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
-    print(json.dumps(random.sample(outlist, 3)))
+        outlist.append(env['name'])
+# Filter (non-check) builds by platform
 else:
-    print(json.dumps(outlist))
+  for env in all_envs:
+    if options[0] == env['platform']:
+      # Always include board_level = 'pr'
+      if env['board_level'] == 'pr':
+        outlist.append(env['name'])
+      # Include board_level = 'extra' when requested
+      elif "extra" in options and env['board_level'] == "extra":
+        outlist.append(env['name'])
+      # If no board level is specified, include in release builds (not PR)
+      elif "pr" not in options and not env['board_level']:
+        outlist.append(env['name'])
+
+# Return as a JSON list
+print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,30 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.4" date="2025-07-19">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
+    </release>
+    <release version="2.7.3" date="2025-07-10">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
+    </release>
+    <release version="2.7.2" date="2025-07-04">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
+    </release>
+    <release version="2.7.1" date="2025-06-27">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.1</url>
+    </release>
+    <release version="2.7.0" date="2025-06-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.0</url>
+    </release>
+    <release version="2.6.13" date="2025-06-16">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13</url>
+    </release>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
     <release version="2.6.10" date="2025-05-25">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
     </release>

bin/platformio-custom.py

@@ -3,6 +3,7 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+import subprocess
 import json
 import re
 
@@ -92,6 +93,17 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
+# get repository owner if git is installed
+try:
+    r_owner = (
+        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
+        .decode("utf-8")
+        .strip().split("/")
+    )
+    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
+except subprocess.CalledProcessError:
+    repo_owner = "unknown"
+
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -117,6 +129,7 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
+        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")
@@ -131,3 +144,33 @@ for lb in env.GetLibBuilders():
     if lb.name == "meshtastic-device-ui":
         lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
         break
+
+# Get the display resolution from macros
+def get_display_resolution(build_flags):
+    # Check "DISPLAY_SIZE" to determine the screen resolution
+    for flag in build_flags:
+        if isinstance(flag, tuple) and flag[0] == "DISPLAY_SIZE":
+            screen_width, screen_height = map(int, flag[1].split("x"))
+            return screen_width, screen_height
+    print("No screen resolution defined in build_flags. Please define DISPLAY_SIZE.")
+    exit(1)
+
+def load_boot_logo(source, target, env):
+    build_flags = env.get("CPPDEFINES", [])
+    logo_w, logo_h = get_display_resolution(build_flags)
+    print(f"TFT build with {logo_w}x{logo_h} resolution detected")
+
+    # Load the boot logo from `branding/logo_<width>x<height>.png` if it exists
+    source_path = join(env["PROJECT_DIR"], "branding", f"logo_{logo_w}x{logo_h}.png")
+    dest_dir = join(env["PROJECT_DIR"], "data", "boot")
+    dest_path = join(dest_dir, "logo.png")
+    if env.File(source_path).exists():
+        print(f"Loading boot logo from {source_path}")
+        # Prepare the destination
+        env.Execute(f"mkdir -p {dest_dir} && rm -f {dest_path}")
+        # Copy the logo to the `data/boot` directory
+        env.Execute(f"cp {source_path} {dest_path}")
+
+# Load the boot logo on TFT builds
+if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)

bin/web.version

@@ -1 +1 @@
-2.5.3
+2.6.4

boards/ThinkNode-M1.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
   "vendor": "ELECROW"
 }

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -10,7 +10,8 @@
     "hwids": [
       ["0x239A", "0x4405"],
       ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
     ],
     "usb_product": "HT-n5262",
     "mcu": "nrf52840",
@@ -48,6 +49,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/seeed_wio_tracker_L1.json

@@ -7,7 +7,10 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x2886", "0x1668"]],
+    "hwids": [
+      ["0x2886", "0x1668"],
+      ["0x2886", "0x1667"]
+    ],
     "usb_product": "TRACKER L1",
     "mcu": "nrf52840",
     "variant": "seeed_wio_tracker_L1",

boards/seeed_xiao_nrf52840_kit.json

@@ -7,9 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
+    "hwids": [["0x2886", "0x0166"]],
     "usb_product": "XIAO-BOOT",
     "mcu": "nrf52840",
     "variant": "seeed_xiao_nrf52840_kit",

boards/t-deck-pro.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_qspi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://lilygo.cc/products/t-deck-pro",
+  "vendor": "LilyGo"
+}

boards/tracker-t1000-e.json

@@ -11,7 +11,8 @@
       ["0x239A", "0x8029"],
       ["0x239A", "0x0029"],
       ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
+      ["0x239A", "0x802A"],
+      ["0x2886", "0x0057"]
     ],
     "usb_product": "T1000-E-BOOT",
     "mcu": "nrf52840",

boards/wiscore_rak3312.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DRAK3312",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "rak3312"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "WisCore RAK3312 Board",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.rakwireless.com/en-us",
+  "vendor": "rakwireless"
+}

branding/README.md

@@ -0,0 +1,17 @@
+# Meshtastic Branding / Whitelabeling
+
+This directory is consumed during the creation of **event** firmware.
+
+`bin/platformio-custom.py` determines the display resolution, and locates the corresponding `logo_<width>x<height>.png`.
+
+Ex:
+
+- `logo_800x480.png`
+- `logo_480x480.png`
+- `logo_480x320.png`
+- `logo_320x480.png`
+- `logo_320x240.png`
+
+This file is copied to `data/boot/logo.png` before filesytem image compilation.
+
+For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.4.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -16,4 +16,22 @@ meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Sun, 25 May 2025 20:46:49 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [ Ubuntu ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 19 Jul 2025 11:36:55 +0000

debian/meshtasticd.postinst

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # postinst script for meshtasticd
 #
 # see: dh_installdeb(1)

debian/meshtasticd.postrm

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # postrm script for meshtasticd
 #
 # see: dh_installdeb(1)

platformio.ini

@@ -6,7 +6,8 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/platformio.ini
+	variants/*/*/platformio.ini
+	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -51,6 +52,7 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
+	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	#-DBUILD_EPOCH=$UNIX_TIME
 	#-D OLED_PL=1
 
@@ -103,18 +105,18 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.1.2
+	jgromes/RadioLib@7.2.1
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37e2fb84a8d1b7d8cc1e2ed00d34cfb1f284bd59.zip
+	https://github.com/meshtastic/device-ui/archive/c75d545bf9e8d1fe20051c319f427f711113ff22.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.1
+	adafruit/Adafruit BusIO@1.17.2
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -128,7 +130,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.2
+	adafruit/Adafruit INA260 Library@1.5.3
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
@@ -165,8 +167,10 @@ lib_deps =
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
 	adafruit/Adafruit PCT2075@1.0.5
+	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
+	dfrobot/DFRobot_BMM150@1.0.0
 
-  ; (not included in native / portduino)
+; (not included in native / portduino)
 [environmental_extra]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
@@ -193,3 +197,7 @@ lib_deps =
 	boschsensortec/BME68x Sensor Library@1.3.40408
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
+	sensirion/Sensirion Core@0.7.1
+	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
+	sensirion/Sensirion I2C SCD4x@1.1.0

src/AmbientLightingThread.h

@@ -59,12 +59,12 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
         LOG_DEBUG("AmbientLighting init");
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
 #ifdef HAS_LP5562
-        } else if (_type == ScanI2C::LP5562) {
+            if (_type == ScanI2C::LP5562) {
                 rgbw.begin();
 #endif
 #ifdef RGBLED_RED
@@ -155,8 +155,9 @@ class AmbientLightingThread : public concurrency::OSThread
             rgb.setRed(moduleConfig.ambient_lighting.red);
             rgb.setGreen(moduleConfig.ambient_lighting.green);
             rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_LP5562
             rgbw.setCurrent(moduleConfig.ambient_lighting.current);
@@ -183,8 +184,8 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
             pixels.show();
             LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                  moduleConfig.ambient_lighting.blue);
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
@@ -200,11 +201,12 @@ class AmbientLightingThread : public concurrency::OSThread
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                        moduleConfig.ambient_lighting.blue);
             LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
                       moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
         }
-};
+    };
 
 } // namespace concurrency

src/AudioThread.h

@@ -47,6 +47,20 @@ class AudioThread : public concurrency::OSThread
         setCPUFast(false);
     }
 
+    void readAloud(const char *text)
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
+        }
+
+        ESP8266SAM *sam = new ESP8266SAM;
+        sam->Say(audioOut, text);
+        delete sam;
+        setCPUFast(false);
+    }
+
   protected:
     int32_t runOnce() override
     {

src/BluetoothStatus.h

@@ -88,10 +88,16 @@ class BluetoothStatus : public Status
                 break;
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, HIGH);
+#endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, LOW);
+#endif
                 break;
             }
         }

src/ButtonThread.cpp

@@ -1,467 +0,0 @@
-#include "ButtonThread.h"
-
-#include "configuration.h"
-#if !MESHTASTIC_EXCLUDE_GPS
-#include "GPS.h"
-#endif
-#include "MeshService.h"
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "buzz.h"
-#include "main.h"
-#include "modules/ExternalNotificationModule.h"
-#include "power.h"
-#include "sleep.h"
-#ifdef ARCH_PORTDUINO
-#include "platform/portduino/PortduinoGlue.h"
-#endif
-
-#define DEBUG_BUTTONS 0
-#if DEBUG_BUTTONS
-#define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_BUTTON(...)
-#endif
-
-using namespace concurrency;
-
-ButtonThread *buttonThread; // Declared extern in header
-volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-OneButton ButtonThread::userButton; // Get reference to static member
-#endif
-ButtonThread::ButtonThread() : OSThread("Button")
-{
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
-    }
-#elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
-#endif
-#ifdef USERPREFS_BUTTON_PIN
-    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
-#endif
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
-    this->userButton = OneButton(pin, false, false);
-#elif defined(BUTTON_ACTIVE_LOW)
-    this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
-#else
-    this->userButton = OneButton(pin, true, true);
-#endif
-    LOG_DEBUG("Use GPIO%02d for button", pin);
-#endif
-
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-#ifdef BUTTON_SENSE_TYPE
-    pinMode(pin, BUTTON_SENSE_TYPE);
-#else
-    pinMode(pin, INPUT_PULLUP_SENSE);
-#endif
-#endif
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-    userButton.attachClick(userButtonPressed);
-    userButton.setClickMs(BUTTON_CLICK_MS);
-    userButton.setPressMs(BUTTON_LONGPRESS_MS);
-    userButton.setDebounceMs(1);
-    userButton.attachDoubleClick(userButtonDoublePressed);
-    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
-#if !defined(T_DECK) &&                                                                                                          \
-    !defined(                                                                                                                    \
-        ELECROW_ThinkNode_M2) // T-Deck immediately wakes up after shutdown, Thinknode M2 has this on the smaller ALT button
-    userButton.attachLongPressStart(userButtonPressedLongStart);
-    userButton.attachLongPressStop(userButtonPressedLongStop);
-#endif
-#endif
-
-#ifdef BUTTON_PIN_ALT
-#if defined(ELECROW_ThinkNode_M2)
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, false, false);
-#else
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#endif
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-    pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
-#endif
-    userButtonAlt.attachClick(userButtonPressedScreen);
-    userButtonAlt.setClickMs(BUTTON_CLICK_MS);
-    userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
-    userButtonAlt.setDebounceMs(1);
-    userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
-    userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-    userButtonTouch.setPressMs(BUTTON_TOUCH_MS);
-    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
-#endif
-
-#ifdef ARCH_ESP32
-    // Register callbacks for before and after lightsleep
-    // Used to detach and reattach interrupts
-    lsObserver.observe(&notifyLightSleep);
-    lsEndObserver.observe(&notifyLightSleepEnd);
-#endif
-
-    attachButtonInterrupts();
-#endif
-}
-
-void ButtonThread::switchPage()
-{
-#ifdef BUTTON_PIN
-#if !defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-
-#endif
-#if defined(ARCH_PORTDUINO)
-    if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
-            (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-}
-
-void ButtonThread::sendAdHocPosition()
-{
-    service->refreshLocalMeshNode();
-    auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
-    if (screen) {
-        if (sentPosition)
-            screen->print("Sent ad-hoc position\n");
-        else
-            screen->print("Sent ad-hoc nodeinfo\n");
-        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-    }
-}
-
-int32_t ButtonThread::runOnce()
-{
-    // If the button is pressed we suppress CPU sleep until release
-    canSleep = true; // Assume we should not keep the board awake
-
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
-    userButton.tick();
-    canSleep &= userButton.isIdle();
-#elif defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        userButton.tick();
-        canSleep &= userButton.isIdle();
-    }
-#endif
-#ifdef BUTTON_PIN_ALT
-    userButtonAlt.tick();
-    canSleep &= userButtonAlt.isIdle();
-#endif
-#ifdef BUTTON_PIN_TOUCH
-    userButtonTouch.tick();
-    canSleep &= userButtonTouch.isIdle();
-#endif
-
-    if (btnEvent != BUTTON_EVENT_NONE) {
-        switch (btnEvent) {
-        case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!");
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                break;
-            }
-#ifdef ELECROW_ThinkNode_M1
-            sendAdHocPosition();
-            break;
-#endif
-            switchPage();
-            break;
-        }
-
-        case BUTTON_EVENT_PRESSED_SCREEN: {
-            LOG_BUTTON("AltPress!");
-#ifdef ELECROW_ThinkNode_M1
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                break;
-            }
-            switchPage();
-            break;
-#endif
-            // turn screen on or off
-            screen_flag = !screen_flag;
-            if (screen)
-                screen->setOn(screen_flag);
-            break;
-        }
-
-        case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!");
-#ifdef ELECROW_ThinkNode_M1
-            digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-            break;
-#endif
-            sendAdHocPosition();
-            break;
-        }
-
-        case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
-            switch (multipressClickCount) {
-#if HAS_GPS && !defined(ELECROW_ThinkNode_M1)
-            // 3 clicks: toggle GPS
-            case 3:
-                if (!config.device.disable_triple_click && (gps != nullptr)) {
-                    gps->toggleGpsMode();
-                    if (screen)
-                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-                }
-                break;
-#elif defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
-            case 3:
-                LOG_INFO("3 clicks: toggle buzzer");
-                buzzer_flag = !buzzer_flag;
-                if (!buzzer_flag)
-                    noTone(PIN_BUZZER);
-                break;
-
-#endif
-
-#if defined(USE_EINK) && defined(PIN_EINK_EN) && !defined(ELECROW_ThinkNode_M1) // i.e. T-Echo
-            // 4 clicks: toggle backlight
-            case 4:
-                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-                break;
-#endif
-#if !MESHTASTIC_EXCLUDE_SCREEN && HAS_SCREEN
-            // 5 clicks: start accelerometer/magenetometer calibration for 30 seconds
-            case 5:
-                if (accelerometerThread) {
-                    accelerometerThread->calibrate(30);
-                }
-                break;
-            // 6 clicks: start accelerometer/magenetometer calibration for 60 seconds
-            case 6:
-                if (accelerometerThread) {
-                    accelerometerThread->calibrate(60);
-                }
-                break;
-#endif
-            // No valid multipress action
-            default:
-                break;
-            } // end switch: click count
-
-            break;
-        } // end multipress event
-
-        case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!");
-            powerFSM.trigger(EVENT_PRESS);
-            if (screen) {
-                screen->startAlert("Shutting down...");
-            }
-            playBeep();
-            break;
-        }
-
-        // Do actual shutdown when button released, otherwise the button release
-        // may wake the board immediatedly.
-        case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press");
-            playShutdownMelody();
-            delay(3000);
-            power->shutdown();
-            break;
-        }
-
-#ifdef BUTTON_PIN_TOUCH
-        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!");
-            // Ignore if: no screen
-            if (!screen)
-                break;
-
-#ifdef TTGO_T_ECHO
-            // Ignore if: TX in progress
-            // Uncommon T-Echo hardware bug, LoRa TX triggers touch button
-            if (!RadioLibInterface::instance || RadioLibInterface::instance->isSending())
-                break;
-#endif
-
-            // Wake if asleep
-            if (powerFSM.getState() == &stateDARK)
-                powerFSM.trigger(EVENT_PRESS);
-
-            // Update display (legacy behaviour)
-            screen->forceDisplay();
-            break;
-        }
-#endif // BUTTON_PIN_TOUCH
-
-        default:
-            break;
-        }
-        btnEvent = BUTTON_EVENT_NONE;
-    }
-
-    return 50;
-}
-
-/*
- * Attach (or re-attach) hardware interrupts for buttons
- * Public method. Used outside class when waking from MCU sleep
- */
-void ButtonThread::attachButtonInterrupts()
-{
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        wakeOnIrq(settingsMap[user], FALLING);
-#elif defined(BUTTON_PIN)
-    // Interrupt for user button, during normal use. Improves responsiveness.
-    attachInterrupt(
-#if !defined(USERPREFS_BUTTON_PIN)
-        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
-#endif
-        []() {
-            ButtonThread::userButton.tick();
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        },
-        CHANGE);
-#endif
-
-#ifdef BUTTON_PIN_ALT
-#ifdef ELECROW_ThinkNode_M2
-    wakeOnIrq(BUTTON_PIN_ALT, RISING);
-#else
-    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
-#endif
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
-#endif
-}
-
-/*
- * Detach the "normal" button interrupts.
- * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
- */
-void ButtonThread::detachButtonInterrupts()
-{
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        detachInterrupt(settingsMap[user]);
-#elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
-    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
-#endif
-#endif
-
-#ifdef BUTTON_PIN_ALT
-    detachInterrupt(BUTTON_PIN_ALT);
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    detachInterrupt(BUTTON_PIN_TOUCH);
-#endif
-}
-
-#ifdef ARCH_ESP32
-
-// Detach our class' interrupts before lightsleep
-// Allows sleep.cpp to configure its own interrupts, which wake the device on user-button press
-int ButtonThread::beforeLightSleep(void *unused)
-{
-    detachButtonInterrupts();
-    return 0; // Indicates success
-}
-
-// Reconfigure our interrupts
-// Our class' interrupts were disconnected during sleep, to allow the user button to wake the device from sleep
-int ButtonThread::afterLightSleep(esp_sleep_wakeup_cause_t cause)
-{
-    attachButtonInterrupts();
-    return 0; // Indicates success
-}
-
-#endif
-
-/**
- * Watch a GPIO and if we get an IRQ, wake the main thread.
- * Use to add wake on button press
- */
-void ButtonThread::wakeOnIrq(int irq, int mode)
-{
-    attachInterrupt(
-        irq,
-        [] {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-            runASAP = true;
-        },
-        FALLING);
-}
-
-// Static callback
-void ButtonThread::userButtonMultiPressed(void *callerThread)
-{
-    // Grab click count from non-static button, while the info is still valid
-    ButtonThread *thread = (ButtonThread *)callerThread;
-    thread->storeClickCount();
-
-    // Then handle later, in the usual way
-    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
-}
-
-// Non-static method, runs during callback. Grabs info while still valid
-void ButtonThread::storeClickCount()
-{
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
-    multipressClickCount = userButton.getNumberClicks();
-#endif
-}
-
-void ButtonThread::userButtonPressedLongStart()
-{
-    if (millis() > c_holdOffTime) {
-        btnEvent = BUTTON_EVENT_LONG_PRESSED;
-    }
-}
-
-void ButtonThread::userButtonPressedLongStop()
-{
-    if (millis() > c_holdOffTime) {
-        btnEvent = BUTTON_EVENT_LONG_RELEASED;
-    }
-}

src/ButtonThread.h

@@ -1,91 +0,0 @@
-#pragma once
-
-#include "OneButton.h"
-#include "concurrency/OSThread.h"
-#include "configuration.h"
-
-#ifndef BUTTON_CLICK_MS
-#define BUTTON_CLICK_MS 250
-#endif
-
-#ifndef BUTTON_LONGPRESS_MS
-#define BUTTON_LONGPRESS_MS 5000
-#endif
-
-#ifndef BUTTON_TOUCH_MS
-#define BUTTON_TOUCH_MS 400
-#endif
-
-class ButtonThread : public concurrency::OSThread
-{
-  public:
-    static const uint32_t c_holdOffTime = 30000; // hold off 30s after boot
-
-    enum ButtonEventType {
-        BUTTON_EVENT_NONE,
-        BUTTON_EVENT_PRESSED,
-        BUTTON_EVENT_PRESSED_SCREEN,
-        BUTTON_EVENT_DOUBLE_PRESSED,
-        BUTTON_EVENT_MULTI_PRESSED,
-        BUTTON_EVENT_LONG_PRESSED,
-        BUTTON_EVENT_LONG_RELEASED,
-        BUTTON_EVENT_TOUCH_LONG_PRESSED,
-    };
-
-    ButtonThread();
-    int32_t runOnce() override;
-    void attachButtonInterrupts();
-    void detachButtonInterrupts();
-    void storeClickCount();
-    bool isBuzzing() { return buzzer_flag; }
-    void setScreenFlag(bool flag) { screen_flag = flag; }
-    bool getScreenFlag() { return screen_flag; }
-
-    // Disconnect and reconnect interrupts for light sleep
-#ifdef ARCH_ESP32
-    int beforeLightSleep(void *unused);
-    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
-#endif
-  private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-    static OneButton userButton; // Static - accessed from an interrupt
-#endif
-#ifdef BUTTON_PIN_ALT
-    OneButton userButtonAlt;
-#endif
-#ifdef BUTTON_PIN_TOUCH
-    OneButton userButtonTouch;
-#endif
-
-#ifdef ARCH_ESP32
-    // Get notified when lightsleep begins and ends
-    CallbackObserver<ButtonThread, void *> lsObserver =
-        CallbackObserver<ButtonThread, void *>(this, &ButtonThread::beforeLightSleep);
-    CallbackObserver<ButtonThread, esp_sleep_wakeup_cause_t> lsEndObserver =
-        CallbackObserver<ButtonThread, esp_sleep_wakeup_cause_t>(this, &ButtonThread::afterLightSleep);
-#endif
-
-    // set during IRQ
-    static volatile ButtonEventType btnEvent;
-    bool buzzer_flag = false;
-    bool screen_flag = true;
-
-    // Store click count during callback, for later use
-    volatile int multipressClickCount = 0;
-
-    static void wakeOnIrq(int irq, int mode);
-
-    static void sendAdHocPosition();
-    static void switchPage();
-
-    // IRQ callbacks
-    static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
-    static void userButtonPressedScreen() { btnEvent = BUTTON_EVENT_PRESSED_SCREEN; }
-    static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
-    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
-    static void userButtonPressedLongStart();
-    static void userButtonPressedLongStop();
-    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
-};
-
-extern ButtonThread *buttonThread;

src/Power.cpp

@@ -20,6 +20,11 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
+#if defined(ARCH_PORTDUINO)
+#include "api/WiFiServerAPI.h"
+#include "input/LinuxInputImpl.h"
+#endif
+
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -103,7 +108,7 @@ NullSensor ina3221Sensor;
 
 #endif
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_STM32WL)
+#if !MESHTASTIC_EXCLUDE_I2C
 #include "modules/Telemetry/Sensor/MAX17048Sensor.h"
 #include <utility>
 extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
@@ -120,6 +125,15 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
+#ifdef HAS_PPM
+// note: XPOWERS_CHIP_XXX must be defined in variant.h
+#include <XPowersLib.h>
+#endif
+
+#ifdef HAS_BQ27220
+#include "bq27220.h"
+#endif
+
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -278,7 +292,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_STM32WL) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             return getINAVoltage();
         }
@@ -456,8 +470,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #else
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL) &&                                       \
-    !defined(DISABLE_INA_CHARGING_DETECTION)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
             // get current flow from INA sensor - negative value means power flowing into the battery
             // default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD
@@ -503,7 +516,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -661,12 +674,16 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    // initialise one power sensor (only)
-    bool found = axpChipInit();
-    if (!found)
-        found = lipoInit();
-    if (!found)
-        found = analogInit();
+    bool found = false;
+    if (axpChipInit()) {
+        found = true;
+    } else if (lipoInit()) {
+        found = true;
+    } else if (lipoChargerInit()) {
+        found = true;
+    } else if (analogInit()) {
+        found = true;
+    }
 
 #ifdef NRF_APM
     found = true;
@@ -678,9 +695,59 @@ bool Power::setup()
     return found;
 }
 
+void Power::powerCommandsCheck()
+{
+    if (rebootAtMsec && millis() > rebootAtMsec) {
+        LOG_INFO("Rebooting");
+        reboot();
+    }
+
+    if (shutdownAtMsec && millis() > shutdownAtMsec) {
+        shutdownAtMsec = 0;
+        shutdown();
+    }
+}
+
+void Power::reboot()
+{
+    notifyReboot.notifyObservers(NULL);
+#if defined(ARCH_ESP32)
+    ESP.restart();
+#elif defined(ARCH_NRF52)
+    NVIC_SystemReset();
+#elif defined(ARCH_RP2040)
+    rp2040.reboot();
+#elif defined(ARCH_PORTDUINO)
+    deInitApiServer();
+    if (aLinuxInputImpl)
+        aLinuxInputImpl->deInit();
+    SPI.end();
+    Wire.end();
+    Serial1.end();
+    if (screen)
+        delete screen;
+    LOG_DEBUG("final reboot!");
+    reboot();
+#elif defined(ARCH_STM32WL)
+    HAL_NVIC_SystemReset();
+#else
+    rebootAtMsec = -1;
+    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
+#endif
+}
+
 void Power::shutdown()
 {
-    LOG_INFO("Shutting down");
+
+#if HAS_SCREEN
+    if (screen) {
+        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+    }
+#endif
+#if !defined(ARCH_STM32WL)
+    playShutdownMelody();
+#endif
+    nodeDB->saveToDisk();
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -692,7 +759,11 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, false);
+    doDeepSleep(DELAY_FOREVER, false, true);
+#elif defined(ARCH_PORTDUINO)
+    exit(EXIT_SUCCESS);
+#else
+    LOG_WARN("FIXME implement shutdown for this platform");
 #endif
 }
 
@@ -853,6 +924,7 @@ int32_t Power::runOnce()
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press");
+            if (screen)
                 screen->setOn(false);
         }
 #endif
@@ -1158,7 +1230,7 @@ bool Power::axpChipInit()
 #endif
 }
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if !MESHTASTIC_EXCLUDE_I2C && __has_include(<Adafruit_MAX1704X.h>)
 
 /**
  * Wrapper class for an I2C MAX17048 Lipo battery sensor.
@@ -1235,3 +1307,144 @@ bool Power::lipoInit()
     return false;
 }
 #endif
+
+#if defined(HAS_PPM) && HAS_PPM
+
+/**
+ * Adapter class for BQ25896/BQ27220 Lipo battery charger.
+ */
+class LipoCharger : public HasBatteryLevel
+{
+  private:
+    XPowersPPM *ppm = nullptr;
+    BQ27220 *bq = nullptr;
+
+  public:
+    /**
+     * Init the I2C BQ25896 Lipo battery charger
+     */
+    bool runOnce()
+    {
+        if (ppm == nullptr) {
+            ppm = new XPowersPPM;
+            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+            if (result) {
+                LOG_INFO("PPM BQ25896 init succeeded");
+                // Set the minimum operating voltage. Below this voltage, the PPM will protect
+                // ppm->setSysPowerDownVoltage(3100);
+
+                // Set input current limit, default is 500mA
+                // ppm->setInputCurrentLimit(800);
+
+                // Disable current limit pin
+                // ppm->disableCurrentLimitPin();
+
+                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
+                ppm->setChargeTargetVoltage(4288);
+
+                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
+                // ppm->setPrechargeCurr(64);
+
+                // The premise is that limit pin is disabled, or it will
+                // only follow the maximum charging current set by limit pin.
+                // Set the charging current , Range:0~5056mA ,step:64mA
+                ppm->setChargerConstantCurr(1024);
+
+                // To obtain voltage data, the ADC must be enabled first
+                ppm->enableMeasure();
+
+                // Turn on charging function
+                // If there is no battery connected, do not turn on the charging function
+                ppm->enableCharge();
+            } else {
+                LOG_WARN("PPM BQ25896 init failed");
+                delete ppm;
+                ppm = nullptr;
+                return false;
+            }
+        }
+        if (bq == nullptr) {
+            bq = new BQ27220;
+            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
+
+            bool result = bq->init();
+            if (result) {
+                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
+                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
+                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
+                return true;
+            } else {
+                LOG_WARN("BQ27220 init failed");
+                delete bq;
+                bq = nullptr;
+                return false;
+            }
+        }
+        return false;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override
+    {
+        return -1;
+        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
+    }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override
+    {
+        bool isCharging = ppm->isCharging();
+        if (isCharging) {
+            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
+        } else {
+            if (!ppm->isVbusIn()) {
+                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
+            }
+        }
+        return isCharging;
+    }
+};
+
+LipoCharger lipoCharger;
+
+/**
+ * Init the Lipo battery charger
+ */
+bool Power::lipoChargerInit()
+{
+    bool result = lipoCharger.runOnce();
+    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
+    if (!result)
+        return false;
+    batteryLevel = &lipoCharger;
+    return true;
+}
+
+#else
+/**
+ * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::lipoChargerInit()
+{
+    return false;
+}
+#endif

src/PowerFSM.cpp

@@ -26,7 +26,7 @@
 #ifndef SLEEP_TIME
 #define SLEEP_TIME 30
 #endif
-#if EXCLUDE_POWER_FSM
+#if MESHTASTIC_EXCLUDE_POWER_FSM
 FakeFsm powerFSM;
 void PowerFSM_setup(){};
 #else
@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    power->shutdown();
+    shutdownAtMsec = millis();
 }
 
 #include "error.h"
@@ -82,6 +82,7 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
@@ -160,6 +161,7 @@ static void lsExit()
 static void nbEnter()
 {
     LOG_DEBUG("State: NB");
+    if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -172,6 +174,7 @@ static void nbEnter()
 static void darkEnter()
 {
     setBluetoothEnable(true);
+    if (screen)
         screen->setOn(false);
 }
 
@@ -179,15 +182,15 @@ static void serialEnter()
 {
     LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
+    if (screen) {
         screen->setOn(true);
-    screen->print("Serial connected\n");
+    }
 }
 
 static void serialExit()
 {
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
-    screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
@@ -198,15 +201,10 @@ static void powerEnter()
         LOG_INFO("Loss of power in Powered");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
+        if (screen)
             screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-
-        // Mothballed: print change of power-state to device screen
-        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
-            strcmp(powerFSM.getState()->name, "DARK") != 0) {
-            screen->print("Powered...\n");
-        }*/
     }
 }
 
@@ -221,17 +219,15 @@ static void powerIdle()
 
 static void powerExit()
 {
+    if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
-
-    // Mothballed: print change of power-state to device screen
-    /*if (!isPowered())
-        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
 {
     LOG_DEBUG("State: ON");
+    if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -244,11 +240,6 @@ static void onIdle()
     }
 }
 
-static void screenPress()
-{
-    screen->onPress();
-}
-
 static void bootEnter()
 {
     LOG_DEBUG("State: BOOT");
@@ -292,9 +283,9 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateLS, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateDARK, isPowered() ? &statePOWER : &stateON, EVENT_PRESS, NULL, "Press");
-    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
-    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, NULL, "Press");
+    powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, NULL, "Press"); // reenter On to restart our timers
+    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, NULL,
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
@@ -328,10 +319,10 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
-        // show the latest node when we get a new node db update
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");

src/PowerFSM.h

@@ -11,7 +11,7 @@
 #define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
-#define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen
+// #define EVENT_NODEDB_UPDATED 8     // Now defunct: NodeDB has a big enough change that we think you should turn on the screen
 #define EVENT_CONTACT_FROM_PHONE 9 // the phone just talked to us over bluetooth
 #define EVENT_LOW_BATTERY 10       // Battery is critically low, go to sleep
 #define EVENT_SERIAL_CONNECTED 11
@@ -22,7 +22,7 @@
 #define EVENT_SHUTDOWN 16        // force a full shutdown now (not just sleep)
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
-#if EXCLUDE_POWER_FSM
+#if MESHTASTIC_EXCLUDE_POWER_FSM
 class FakeFsm
 {
   public:

src/PowerFSMThread.h

@@ -18,7 +18,7 @@ class PowerFSMThread : public OSThread
   protected:
     int32_t runOnce() override
     {
-#if !EXCLUDE_POWER_FSM
+#if !MESHTASTIC_EXCLUDE_POWER_FSM
         powerFSM.run_machine();
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake

src/RedirectablePrint.cpp

@@ -352,8 +352,8 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
     for (uint16_t i = 0; i < len; i += 16) {
         if (i % 128 == 0)
             log(logLevel, "    +------------------------------------------------+ +----------------+");
-        char s[] = "|                                                | |                |\n";
-        uint8_t ix = 1, iy = 52;
+        char s[] = "     |                                                | |                |\n";
+        uint8_t ix = 5, iy = 56;
         for (uint8_t j = 0; j < 16; j++) {
             if (i + j < len) {
                 uint8_t c = buf[i + j];
@@ -367,10 +367,8 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
             }
         }
         uint8_t index = i / 16;
-        if (i < 256)
-            log(logLevel, " ");
-        log(logLevel, "%02x", index);
-        log(logLevel, ".");
+        sprintf(s, "%03x", index);
+        s[3] = '.';
         log(logLevel, s);
     }
     log(logLevel, "    +------------------------------------------------+ +----------------+");

src/buzz/BuzzerFeedbackThread.cpp

@@ -0,0 +1,72 @@
+#include "BuzzerFeedbackThread.h"
+#include "NodeDB.h"
+#include "buzz.h"
+#include "configuration.h"
+
+BuzzerFeedbackThread *buzzerFeedbackThread;
+
+BuzzerFeedbackThread::BuzzerFeedbackThread() : OSThread("BuzzerFeedback")
+{
+    if (inputBroker)
+        inputObserver.observe(inputBroker);
+}
+
+int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
+{
+    // Only provide feedback if buzzer is enabled for notifications
+    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY) {
+        return 0; // Let other handlers process the event
+    }
+
+    // Track last event time for potential future use
+    lastEventTime = millis();
+    needsUpdate = true;
+
+    // Handle different input events with appropriate buzzer feedback
+    switch (event->inputEvent) {
+    case INPUT_BROKER_USER_PRESS:
+    case INPUT_BROKER_ALT_PRESS:
+    case INPUT_BROKER_SELECT:
+        playBeep(); // Confirmation feedback
+        break;
+
+    case INPUT_BROKER_UP:
+    case INPUT_BROKER_DOWN:
+    case INPUT_BROKER_LEFT:
+    case INPUT_BROKER_RIGHT:
+        playChirp(); // Navigation feedback
+        break;
+
+    case INPUT_BROKER_CANCEL:
+    case INPUT_BROKER_BACK:
+        playBoop(); // Cancel/back feedback
+        break;
+
+    case INPUT_BROKER_SEND_PING:
+        playComboTune(); // Ping sent feedback
+        break;
+
+    default:
+        // For other events, check if it's a printable character
+        if (event->kbchar >= 32 && event->kbchar <= 126) {
+            // Typing feedback - very short boop
+            // Removing this for now, too chatty
+            // playChirp();
+        }
+        break;
+    }
+
+    return 0; // Allow other handlers to process the event
+}
+
+int32_t BuzzerFeedbackThread::runOnce()
+{
+    // This thread is primarily event-driven, but we can use runOnce
+    // for any periodic tasks if needed in the future
+
+    needsUpdate = false;
+
+    // Run every 100ms when active, less frequently when idle
+    return needsUpdate ? 100 : 1000;
+}

src/buzz/BuzzerFeedbackThread.h

@@ -0,0 +1,24 @@
+#pragma once
+
+#include "Observer.h"
+#include "concurrency/OSThread.h"
+#include "input/InputBroker.h"
+
+class BuzzerFeedbackThread : public concurrency::OSThread
+{
+    CallbackObserver<BuzzerFeedbackThread, const InputEvent *> inputObserver =
+        CallbackObserver<BuzzerFeedbackThread, const InputEvent *>(this, &BuzzerFeedbackThread::handleInputEvent);
+
+  public:
+    BuzzerFeedbackThread();
+    int handleInputEvent(const InputEvent *event);
+
+  protected:
+    virtual int32_t runOnce() override;
+
+  private:
+    uint32_t lastEventTime = 0;
+    bool needsUpdate = false;
+};
+
+extern BuzzerFeedbackThread *buzzerFeedbackThread;

src/buzz/buzz.cpp

@@ -38,6 +38,11 @@ const int DURATION_1_1 = 1000; // 1/1 note
 
 void playTones(const ToneDuration *tone_durations, int size)
 {
+    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY) {
+        // Buzzer is disabled or not set to system tones
+        return;
+    }
 #ifdef PIN_BUZZER
     if (!config.device.buzzer_gpio)
         config.device.buzzer_gpio = PIN_BUZZER;
@@ -54,7 +59,7 @@ void playTones(const ToneDuration *tone_durations, int size)
 
 void playBeep()
 {
-    ToneDuration melody[] = {{NOTE_B3, DURATION_1_4}};
+    ToneDuration melody[] = {{NOTE_B3, DURATION_1_8}};
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
@@ -87,3 +92,72 @@ void playShutdownMelody()
     ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_AS3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}};
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
+
+void playChirp()
+{
+    // A short, friendly "chirp" sound for key presses
+    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Very short AS3 note
+    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
+}
+
+void playBoop()
+{
+    // A short, friendly "boop" sound for button presses
+    ToneDuration melody[] = {{NOTE_A3, 50}}; // Very short A3 note
+    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
+}
+
+void playLongPressLeadUp()
+{
+    // An ascending lead-up sequence for long press - builds anticipation
+    ToneDuration melody[] = {
+        {NOTE_C3, 100}, // Start low
+        {NOTE_E3, 100}, // Step up
+        {NOTE_G3, 100}, // Keep climbing
+        {NOTE_B3, 150}  // Peak with longer note for emphasis
+    };
+    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
+}
+
+// Static state for progressive lead-up notes
+static int leadUpNoteIndex = 0;
+static const ToneDuration leadUpNotes[] = {
+    {NOTE_C3, 100}, // Start low
+    {NOTE_E3, 100}, // Step up
+    {NOTE_G3, 100}, // Keep climbing
+    {NOTE_B3, 150}  // Peak with longer note for emphasis
+};
+static const int leadUpNotesCount = sizeof(leadUpNotes) / sizeof(ToneDuration);
+
+bool playNextLeadUpNote()
+{
+    if (leadUpNoteIndex >= leadUpNotesCount) {
+        return false; // All notes have been played
+    }
+
+    // Use playTones to handle buzzer logic consistently
+    const auto &note = leadUpNotes[leadUpNoteIndex];
+    playTones(&note, 1); // Play single note using existing playTones function
+
+    leadUpNoteIndex++;
+    return true; // Note was played (playTones handles buzzer availability internally)
+}
+
+void resetLeadUpSequence()
+{
+    leadUpNoteIndex = 0;
+}
+
+void playComboTune()
+{
+    // Quick high-pitched notes with trills
+    ToneDuration melody[] = {
+        {NOTE_G3, 80},  // Quick chirp
+        {NOTE_B3, 60},  // Higher chirp
+        {NOTE_CS4, 80}, // Even higher
+        {NOTE_G3, 60},  // Quick trill down
+        {NOTE_CS4, 60}, // Quick trill up
+        {NOTE_B3, 120}  // Ending chirp
+    };
+    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
+}

src/buzz/buzz.h

@@ -6,3 +6,9 @@ void playStartMelody();
 void playShutdownMelody();
 void playGPSEnableBeep();
 void playGPSDisableBeep();
+void playComboTune();
+void playBoop();
+void playChirp();
+void playLongPressLeadUp();
+bool playNextLeadUpNote();  // Play the next note in the lead-up sequence
+void resetLeadUpSequence(); // Reset the lead-up sequence to start from beginning

src/commands.h

@@ -12,7 +12,7 @@ enum class Cmd {
     STOP_ALERT_FRAME,
     START_FIRMWARE_UPDATE_SCREEN,
     STOP_BOOT_SCREEN,
-    PRINT,
     SHOW_PREV_FRAME,
-    SHOW_NEXT_FRAME
+    SHOW_NEXT_FRAME,
+    NOOP
 };

src/concurrency/Lock.cpp

@@ -9,17 +9,23 @@ namespace concurrency
 Lock::Lock() : handle(xSemaphoreCreateBinary())
 {
     assert(handle);
-    assert(xSemaphoreGive(handle));
+    if (xSemaphoreGive(handle) == false) {
+        abort();
+    }
 }
 
 void Lock::lock()
 {
-    assert(xSemaphoreTake(handle, portMAX_DELAY));
+    if (xSemaphoreTake(handle, portMAX_DELAY) == false) {
+        abort();
+    }
 }
 
 void Lock::unlock()
 {
-    assert(xSemaphoreGive(handle));
+    if (xSemaphoreGive(handle) == false) {
+        abort();
+    }
 }
 #else
 Lock::Lock() {}

src/configuration.h

@@ -81,7 +81,43 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define REGULATORY_LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
 
 // Total system gain in dBm to subtract from Tx power to remain within regulatory and Tx PA limits
-// This value should be set in variant.h and is PA gain + antenna gain (if variant has a non-removable antenna)
+// The value consists of PA gain + antenna gain (if variant has a non-removable antenna)
+// TX_GAIN_LORA should be set with definitions below for common modules, or in variant.h.
+
+// Gain for common modules with transmit PAs
+#ifdef EBYTE_E22_900M30S
+// 10dB PA gain and 30dB rated output; based on measurements from
+// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt
+#define TX_GAIN_LORA 7
+#define SX126X_MAX_POWER 22
+#endif
+
+#ifdef EBYTE_E22_900M33S
+// 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf
+#define TX_GAIN_LORA 25
+#define SX126X_MAX_POWER 8
+#endif
+
+#ifdef NICERF_MINIF27
+// Note that datasheet power level of 9 corresponds with SX1262 at 22dBm
+// Maximum output power of 29dBm with VCC_PA = 5V
+#define TX_GAIN_LORA 7
+#define SX126X_MAX_POWER 22
+#endif
+
+#ifdef NICERF_F30_HF
+// Maximum output power of 29.6dBm with VCC = 5V and SX1262 at 22dBm
+#define TX_GAIN_LORA 8
+#define SX126X_MAX_POWER 22
+#endif
+
+#ifdef NICERF_F30_LF
+// Maximum output power of 32.0dBm with VCC = 5V and SX1262 at 22dBm
+#define TX_GAIN_LORA 10
+#define SX126X_MAX_POWER 22
+#endif
+
+// Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif
@@ -114,11 +150,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
+#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -153,11 +190,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DFROBOT_RAIN_ADDR 0x1d
 #define NAU7802_ADDR 0x2A
 #define MAX30102_ADDR 0x57
+#define SCD4X_ADDR 0x62
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
 #define PCT2075_ADDR 0x37
+#define BQ27220_ADDR 0x55 // same address as TDECK_KB
+#define BQ25896_ADDR 0x6B
+#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -171,6 +212,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
+#define BHI260AP_ADDR 0x28
+#define BMM150_ADDR 0x13
 
 // -----------------------------------------------------------------------------
 // LED
@@ -192,6 +235,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
+#define CST328_ADDR 0x1A
+
+// -----------------------------------------------------------------------------
+// RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
+// - the default i2c address for this sensor is 0x20, and users are instructed to
+// set 0x21 and 0x22 for the second and third sensor if present.
+// -----------------------------------------------------------------------------
+#define RAK120351_ADDR 0x20
+#define RAK120352_ADDR 0x21
+#define RAK120353_ADDR 0x22
 
 // -----------------------------------------------------------------------------
 // BIAS-T Generator
@@ -302,11 +355,41 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #error HW_VENDOR must be defined
 #endif
 
+#ifndef TB_DOWN
+#define TB_DOWN 255
+#endif
+#ifndef TB_UP
+#define TB_UP 255
+#endif
+#ifndef TB_LEFT
+#define TB_LEFT 255
+#endif
+#ifndef TB_RIGHT
+#define TB_RIGHT 255
+#endif
+#ifndef TB_PRESS
+#define TB_PRESS 255
+#endif
+
 // Support multiple RGB LED configuration
 #if defined(HAS_NCP5623) || defined(HAS_LP5562) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #define HAS_RGB_LED
 #endif
 
+// default mapping of pins
+#if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
+#define ALT_BUTTON_PIN PIN_BUTTON2
+#endif
+#if defined ALT_BUTTON_PIN
+
+#ifndef ALT_BUTTON_ACTIVE_LOW
+#define ALT_BUTTON_ACTIVE_LOW true
+#endif
+#ifndef ALT_BUTTON_ACTIVE_PULLUP
+#define ALT_BUTTON_ACTIVE_PULLUP true
+#endif
+#endif
+
 // -----------------------------------------------------------------------------
 // Global switches to turn off features for a minimized build
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.cpp

@@ -37,8 +37,14 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P};
-    return firstOfOrNONE(8, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P, BMM150};
+    return firstOfOrNONE(9, types);
+}
+
+ScanI2C::FoundDevice ScanI2C::firstAQI() const
+{
+    ScanI2C::DeviceType types[] = {PMSA0031, SCD4X};
+    return firstOfOrNONE(2, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstRGBLED() const

src/detect/ScanI2C.h

@@ -61,6 +61,7 @@ class ScanI2C
         FT6336U,
         STK8BAXX,
         ICM20948,
+        SCD4X,
         MAX30102,
         TPS65233,
         MPR121KB,
@@ -70,8 +71,15 @@ class ScanI2C
         DFROBOT_RAIN,
         DPS310,
         LTR390UV,
+        RAK12035,
         TCA8418KB,
         PCT2075,
+        CST328,
+        BQ25896,
+        BQ27220,
+        LTR553ALS,
+        BHI260AP,
+        BMM150
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -124,6 +132,8 @@ class ScanI2C
 
     FoundDevice firstAccelerometer() const;
 
+    FoundDevice firstAQI() const;
+
     FoundDevice firstRGBLED() const;
 
     virtual FoundDevice find(DeviceType) const;

src/detect/ScanI2CTwoWire.cpp

@@ -184,8 +184,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                rtc.writeToRegister(0x35, 0x07); // no Clkout
-                rtc.writeToRegister(0x37, 0xB4);
+                // Update RTC EEPROM settings, if necessary
+                if (rtc.readEEPROMRegister(0x35) != 0x07) {
+                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
+                }
+                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
+                    rtc.writeEEPROMRegister(0x37, 0xB4);
+                }
                 break;
 #endif
 
@@ -206,7 +211,17 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
+            case TDECK_KB_ADDR:
+                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
+                if (registerValue != 0) {
+                    logFoundDevice("BQ27220", (uint8_t)addr.address);
+                    type = BQ27220;
+                } else {
+                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
+                    type = TDECKKB;
+                }
+                break;
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -358,7 +373,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
@@ -396,6 +411,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
+                if ((registerValue & 0b00000011) == 0b00000010) {
+                    type = BQ25896;
+                    logFoundDevice("BQ25896", (uint8_t)addr.address);
+                    break;
+                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -423,9 +444,21 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMA423", (uint8_t)addr.address);
                 }
                 break;
+            case TCA9535_ADDR:
+            case RAK120352_ADDR:
+            case RAK120353_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x02), 1);
+                if (registerValue == addr.address) { // RAK12035 returns its I2C address at 0x02 (eg 0x20)
+                    type = RAK12035;
+                    logFoundDevice("RAK12035", (uint8_t)addr.address);
+                } else {
+                    type = TCA9535;
+                    logFoundDevice("TCA9535", (uint8_t)addr.address);
+                }
+
+                break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
@@ -435,6 +468,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
                 SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233", (uint8_t)addr.address);
 #endif

src/gps/GPS.cpp

@@ -39,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
-#if defined(RAK2560)
-HardwareSerial *GPS::_serial_gps = &Serial2;
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(GPS_SERIAL_PORT)
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif
@@ -643,8 +643,16 @@ bool GPS::setup()
             delay(250);
         } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352)) {
 
+            if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_IN ||
+                config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_NP_865) {
                 _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
-
+                // GPS GLONASS GALILEO BDS QZSS NAVIC
+                //  1    0       1      0   0    1
+            } else {
+                _serial_gps->write("$PAIR066,1,1,1,1,0,0*3A\r\n"); // Enable GPS+GLONASS+GALILEO+BDS
+                // GPS GLONASS GALILEO BDS QZSS NAVIC
+                //  1    1       1      1   0    0
+            }
             // Configure NMEA (sentences will output once per fix)
             _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
             _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
@@ -1503,7 +1511,7 @@ bool GPS::lookForTime()
 
 #ifdef GNSS_AIROHA
     uint8_t fix = reader.fixQuality();
-    if (fix > 0) {
+    if (fix >= 1 && fix <= 5) {
         if (lastFixStartMsec > 0) {
             if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                 return false;
@@ -1536,7 +1544,10 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         if (t.tm_mon > -1) {
             LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
                       t.tm_sec, ti.age());
-            perhapsSetRTC(RTCQualityGPS, t);
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
+                // Clear the GPS buffer if we got an invalid time
+                clearBuffer();
+            }
             return true;
         } else
             return false;
@@ -1555,7 +1566,7 @@ bool GPS::lookForLocation()
 #ifdef GNSS_AIROHA
     if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
         uint8_t fix = reader.fixQuality();
-        if (fix > 0) {
+        if (fix >= 1 && fix <= 5) {
             if (lastFixStartMsec > 0) {
                 if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                     return false;

src/gps/RTC.cpp

@@ -105,7 +105,7 @@ void readFromRTC()
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
+RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
@@ -113,7 +113,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-        return false;
+        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -184,9 +184,9 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
         readFromRTC();
 #endif
 
-        return true;
+        return RTCSetResultSuccess;
     } else {
-        return false;
+        return RTCSetResultNotSet; // RTC was already set with a higher quality time
     }
 }
 
@@ -215,7 +215,7 @@ const char *RtcName(RTCQuality quality)
  * @param t The time to potentially set the RTC to.
  * @return True if the RTC was set to the provided time, false otherwise.
  */
-bool perhapsSetRTC(RTCQuality q, struct tm &t)
+RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 {
     /* Convert to unix time
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
@@ -227,11 +227,18 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     struct timeval tv;
     tv.tv_sec = res;
     tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
+    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+#ifdef BUILD_EPOCH
+    if (tv.tv_sec < BUILD_EPOCH) {
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+        return RTCSetResultInvalidTime;
+    }
+#endif
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {
         // LOG_DEBUG("Ignore invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
-        return false;
+        return RTCSetResultInvalidTime;
     } else {
         return perhapsSetRTC(q, &tv);
     }
@@ -244,11 +251,15 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
  */
 int32_t getTZOffset()
 {
+#if MESHTASTIC_EXCLUDE_TZ
+    return 0;
+#else
     time_t now = getTime(false);
     struct tm *gmt;
     gmt = gmtime(&now);
     gmt->tm_isdst = -1;
     return (int32_t)difftime(now, mktime(gmt));
+#endif
 }
 
 /**

src/gps/RTC.h

@@ -22,13 +22,22 @@ enum RTCQuality {
     RTCQualityGPS = 4
 };
 
+/// The RTC set result codes
+/// Used to indicate the result of an attempt to set the RTC.
+enum RTCSetResult {
+    RTCSetResultNotSet = 0,      ///< RTC was set successfully
+    RTCSetResultSuccess = 1,     ///< RTC was set successfully
+    RTCSetResultInvalidTime = 3, ///< The provided time was invalid (e.g., before the build epoch)
+    RTCSetResultError = 4        ///< An error occurred while setting the RTC
+};
+
 RTCQuality getRTCQuality();
 
 extern uint32_t lastSetFromPhoneNtpOrGps;
 
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
-bool perhapsSetRTC(RTCQuality q, struct tm &t);
+RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
+RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t);
 
 /// Return a string name for the quality
 const char *RtcName(RTCQuality quality);

src/graphics/EInkDisplay2.cpp

@@ -6,6 +6,10 @@
 #include "main.h"
 #include <SPI.h>
 
+#ifdef GXEPD2_DRIVER_0
+#include "einkDetect.h"
+#endif
+
 /*
     The macros EINK_DISPLAY_MODEL, EINK_WIDTH, and EINK_HEIGHT are defined as build_flags in a variant's platformio.ini
     Previously, these macros were defined at the top of this file.
@@ -174,9 +178,8 @@ bool EInkDisplay::connect()
         }
     }
 
-#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
-    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
+    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);
@@ -203,7 +206,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(M5_COREINK)
+#elif defined(M5_COREINK) || defined(T_DECK_PRO)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
@@ -232,6 +235,23 @@ bool EInkDisplay::connect()
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
     }
+#elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
+
+    // Detect display model, before starting SPI
+    EInkDetectionResult displayModel = detectEInk();
+
+    // Start HSPI
+    hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+
+    // Create GxEPD2 object
+    adafruitDisplay = new GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1>((uint8_t)displayModel, PIN_EINK_CS, PIN_EINK_DC,
+                                                                         PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
+
+    // Init GxEPD2
+    adafruitDisplay->init();
+    adafruitDisplay->setRotation(3);
+
 #endif
 
     return true;

src/graphics/EInkDisplay2.h

@@ -5,6 +5,10 @@
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
 
+#ifdef GXEPD2_DRIVER_0 // If variant has multiple possible display models
+#include "GxEPD2Multi.h"
+#endif
+
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -63,8 +67,15 @@ class EInkDisplay : public OLEDDisplay
     // Connect to the display
     virtual bool connect() override;
 
-    // AdafruitGFX display object - instantiated in connect(), variant specific
+#ifdef GXEPD2_DRIVER_0
+    // AdafruitGFX display object - wrapper for multiple drivers
+    // Allows runtime detection of multiple displays
+    // Avoid this situation if possible!
+    GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1> *adafruitDisplay = NULL;
+#else
+    // AdafruitGFX display object (for single display model) - instantiated in connect(), variant specific
     GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT> *adafruitDisplay = NULL;
+#endif
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \

src/graphics/GxEPD2Multi.h

@@ -0,0 +1,135 @@
+// Wrapper class for GxEPD2_BW
+
+// Generic signature at build-time, so that we can detect display model at run-time
+// Workaround for issue of GxEPD2_BW objects not having a shared base class
+// Only exposes methods which we are actually using
+
+template <typename Driver0, typename Driver1> class GxEPD2_Multi
+{
+  public:
+    void drawPixel(int16_t x, int16_t y, uint16_t color)
+    {
+        if (which == 0)
+            driver0->drawPixel(x, y, color);
+        else
+            driver1->drawPixel(x, y, color);
+    }
+
+    bool nextPage()
+    {
+        if (which == 0)
+            return driver0->nextPage();
+        else
+            return driver1->nextPage();
+    }
+
+    void hibernate()
+    {
+        if (which == 0)
+            driver0->hibernate();
+        else
+            driver1->hibernate();
+    }
+
+    void init(uint32_t serial_diag_bitrate = 0)
+    {
+        if (which == 0)
+            driver0->init(serial_diag_bitrate);
+        else
+            driver1->init(serial_diag_bitrate);
+    }
+
+    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration = 20, bool pulldown_rst_mode = false)
+    {
+        if (which == 0)
+            driver0->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+        else
+            driver1->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
+    }
+
+    void setRotation(uint8_t x)
+    {
+        if (which == 0)
+            driver0->setRotation(x);
+        else
+            driver1->setRotation(x);
+    }
+
+    void setPartialWindow(uint16_t x, uint16_t y, uint16_t w, uint16_t h)
+    {
+        if (which == 0)
+            driver0->setPartialWindow(x, y, w, h);
+        else
+            driver1->setPartialWindow(x, y, w, h);
+    }
+
+    void setFullWindow()
+    {
+        if (which == 0)
+            driver0->setFullWindow();
+        else
+            driver1->setFullWindow();
+    }
+
+    int16_t width()
+    {
+        if (which == 0)
+            return driver0->width();
+        else
+            return driver1->width();
+    }
+
+    int16_t height()
+    {
+        if (which == 0)
+            return driver0->height();
+        else
+            return driver1->height();
+    }
+
+    void clearScreen(uint8_t value = 0xFF)
+    {
+        if (which == 0)
+            driver0->clearScreen();
+        else
+            driver1->clearScreen();
+    }
+
+    void endAsyncFull()
+    {
+        if (which == 0)
+            driver0->endAsyncFull();
+        else
+            driver1->endAsyncFull();
+    }
+
+    // Exposes methods of the GxEPD2_EPD object which is usually available as GxEPD2_BW::epd
+    class Epd2Wrapper
+    {
+      public:
+        bool isBusy() { return m_epd2->isBusy(); }
+        GxEPD2_EPD *m_epd2;
+    } epd2;
+
+    // Constructor
+    // Select driver by passing whichDriver as 0 or 1
+    GxEPD2_Multi(uint8_t whichDriver, int16_t cs, int16_t dc, int16_t rst, int16_t busy, SPIClass &spi)
+    {
+        assert(whichDriver == 0 || whichDriver == 1);
+        which = whichDriver;
+        LOG_DEBUG("GxEPD2_Multi driver: %d", which);
+
+        if (which == 0) {
+            driver0 = new GxEPD2_BW<Driver0, Driver0::HEIGHT>(Driver0(cs, dc, rst, busy, spi));
+            epd2.m_epd2 = &(driver0->epd2);
+        } else if (which == 1) {
+            driver1 = new GxEPD2_BW<Driver1, Driver1::HEIGHT>(Driver1(cs, dc, rst, busy, spi));
+            epd2.m_epd2 = &(driver1->epd2);
+        }
+    }
+
+  private:
+    uint8_t which;
+    GxEPD2_BW<Driver0, Driver0::HEIGHT> *driver0;
+    GxEPD2_BW<Driver1, Driver1::HEIGHT> *driver1;
+};

src/graphics/Screen.h

@@ -5,6 +5,28 @@
 #include "detect/ScanI2C.h"
 #include "mesh/generated/meshtastic/config.pb.h"
 #include <OLEDDisplay.h>
+#include <functional>
+#include <string>
+#include <vector>
+
+#define getStringCenteredX(s) ((SCREEN_WIDTH - display->getStringWidth(s)) / 2)
+namespace graphics
+{
+enum notificationTypeEnum { none, text_banner, selection_picker, node_picker, number_picker };
+
+struct BannerOverlayOptions {
+    const char *message;
+    uint32_t durationMs = 30000;
+    const char **optionsArrayPtr = nullptr;
+    const int *optionsEnumPtr = nullptr;
+    uint8_t optionsCount = 0;
+    std::function<void(int)> bannerCallback = nullptr;
+    int8_t InitialSelected = 0;
+    notificationTypeEnum notificationType = notificationTypeEnum::text_banner;
+};
+} // namespace graphics
+
+bool shouldWakeOnReceivedMessage();
 
 #if !HAS_SCREEN
 #include "power.h"
@@ -14,11 +36,20 @@ namespace graphics
 class Screen
 {
   public:
+    enum FrameFocus : uint8_t {
+        FOCUS_DEFAULT,  // No specific frame
+        FOCUS_PRESERVE, // Return to the previous frame
+        FOCUS_FAULT,
+        FOCUS_TEXTMESSAGE,
+        FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
+        FOCUS_CLOCK,
+        FOCUS_SYSTEM,
+    };
+
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
     void onPress() {}
     void setup() {}
     void setOn(bool) {}
-    void print(const char *) {}
     void doDeepSleep() {}
     void forceDisplay(bool forceUiUpdate = false) {}
     void startFirmwareUpdateScreen() {}
@@ -27,6 +58,9 @@ class Screen
     void setFunctionSymbol(std::string) {}
     void removeFunctionSymbol(std::string) {}
     void startAlert(const char *) {}
+    void showSimpleBanner(const char *message, uint32_t durationMs = 0) {}
+    void showOverlayBanner(BannerOverlayOptions) {}
+    void setFrames(FrameFocus focus) {}
     void endAlert() {}
 };
 } // namespace graphics
@@ -60,10 +94,13 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
+#include "graphics/draw/MenuHandler.h"
 #include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
+#include "modules/AdminModule.h"
 #include "power.h"
 #include <string>
+#include <vector>
 
 // 0 to 255, though particular variants might define different defaults
 #ifndef BRIGHTNESS_DEFAULT
@@ -90,7 +127,7 @@ class Screen
 
 /// Convert an integer GPS coords to a floating point
 #define DegD(i) (i * 1e-7)
-
+extern bool hasUnreadMessage;
 namespace
 {
 /// A basic 2D point class for drawing
@@ -176,14 +213,31 @@ class Screen : public concurrency::OSThread
         CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent); // Sent by Mesh Modules
     CallbackObserver<Screen, const InputEvent *> inputObserver =
         CallbackObserver<Screen, const InputEvent *>(this, &Screen::handleInputEvent);
-    CallbackObserver<Screen, const meshtastic_AdminMessage *> adminMessageObserver =
-        CallbackObserver<Screen, const meshtastic_AdminMessage *>(this, &Screen::handleAdminMessage);
+    CallbackObserver<Screen, AdminModule_ObserverData *> adminMessageObserver =
+        CallbackObserver<Screen, AdminModule_ObserverData *>(this, &Screen::handleAdminMessage);
 
   public:
+    OLEDDisplay *getDisplayDevice() { return dispdev; }
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
-
+    size_t frameCount = 0; // Total number of active frames
     ~Screen();
 
+    // Which frame we want to be displayed, after we regen the frameset by calling setFrames
+    enum FrameFocus : uint8_t {
+        FOCUS_DEFAULT,  // No specific frame
+        FOCUS_PRESERVE, // Return to the previous frame
+        FOCUS_FAULT,
+        FOCUS_TEXTMESSAGE,
+        FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
+        FOCUS_CLOCK,
+        FOCUS_SYSTEM,
+    };
+
+    // Regenerate the normal set of frames, focusing a specific frame if requested
+    // Call when a frame should be added / removed, or custom frames should be cleared
+    void setFrames(FrameFocus focus = FOCUS_DEFAULT);
+
+    std::vector<const uint8_t *> indicatorIcons; // Per-frame custom icon pointers
     Screen(const Screen &) = delete;
     Screen &operator=(const Screen &) = delete;
 
@@ -191,6 +245,12 @@ class Screen : public concurrency::OSThread
     meshtastic_Config_DisplayConfig_OledType model;
     OLEDDISPLAY_GEOMETRY geometry;
 
+    bool isOverlayBannerShowing();
+
+    // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
+    // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
+    char ourId[5];
+
     /// Initializes the UI, turns on the display, starts showing boot screen.
     //
     // Not thread safe - must be called before any other methods are called.
@@ -214,21 +274,9 @@ class Screen : public concurrency::OSThread
 
     void blink();
 
-    void drawFrameText(OLEDDisplay *, OLEDDisplayUiState *, int16_t, int16_t, const char *);
-
-    void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
-
     // Draw north
-    void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY, float myHeading);
-
-    static uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight);
-
     float estimatedHeading(double lat, double lon);
 
-    void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, uint16_t compassDiam, float headingRadian);
-
-    void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields);
-
     /// Handle button press, trackball or swipe action)
     void onPress() { enqueueCmd(ScreenCmd{.cmd = Cmd::ON_PRESS}); }
     void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
@@ -260,6 +308,18 @@ class Screen : public concurrency::OSThread
         enqueueCmd(cmd);
     }
 
+    void showSimpleBanner(const char *message, uint32_t durationMs = 0);
+    void showOverlayBanner(BannerOverlayOptions);
+
+    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
+    void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);
+
+    void requestMenu(graphics::menuHandler::screenMenus menuToShow)
+    {
+        graphics::menuHandler::menuQueue = menuToShow;
+        runNow();
+    }
+
     void startFirmwareUpdateScreen()
     {
         ScreenCmd cmd;
@@ -272,7 +332,7 @@ class Screen : public concurrency::OSThread
     void setHeading(long _heading)
     {
         hasCompass = true;
-        compassHeading = _heading;
+        compassHeading = fmod(_heading, 360);
     }
 
     bool hasHeading() { return hasCompass; }
@@ -292,22 +352,11 @@ class Screen : public concurrency::OSThread
     /// Stops showing the boot screen.
     void stopBootScreen() { enqueueCmd(ScreenCmd{.cmd = Cmd::STOP_BOOT_SCREEN}); }
 
-    /// Writes a string to the screen.
-    void print(const char *text)
+    void runNow()
     {
-        ScreenCmd cmd;
-        cmd.cmd = Cmd::PRINT;
-        // TODO(girts): strdup() here is scary, but we can't use std::string as
-        // FreeRTOS queue is just dumbly copying memory contents. It would be
-        // nice if we had a queue that could copy objects by value.
-        cmd.print_text = strdup(text);
-        if (!enqueueCmd(cmd)) {
-            free(cmd.print_text);
+        setFastFramerate();
+        enqueueCmd(ScreenCmd{.cmd = Cmd::NOOP});
     }
-    }
-
-    /// generates a very brief time delta display
-    std::string drawTimeDelta(uint32_t days, uint32_t hours, uint32_t minutes, uint32_t seconds);
 
     /// Overrides the default utf8 character conversion, to replace empty space with question marks
     static char customFontTableLookup(const uint8_t ch)
@@ -533,7 +582,7 @@ class Screen : public concurrency::OSThread
     int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
     int handleInputEvent(const InputEvent *arg);
-    int handleAdminMessage(const meshtastic_AdminMessage *arg);
+    int handleAdminMessage(AdminModule_ObserverData *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
     void forceDisplay(bool forceUiUpdate = false);
@@ -541,8 +590,6 @@ class Screen : public concurrency::OSThread
     /// Draws our SSL cert screen during boot (called from WebServer)
     void setSSLFrames();
 
-    void setWelcomeFrames();
-
     // Dismiss the currently focussed frame, if possible (e.g. text message, waypoint)
     void dismissCurrentFrame();
 
@@ -591,7 +638,6 @@ class Screen : public concurrency::OSThread
     void handleOnPress();
     void handleShowNextFrame();
     void handleShowPrevFrame();
-    void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
 
     // Info collected by setFrames method.
@@ -600,30 +646,37 @@ class Screen : public concurrency::OSThread
     // - Used to dismiss the currently shown frame (txt; waypoint) by CardKB combo
     struct FramesetInfo {
         struct FramePositions {
-            uint8_t fault = 0;
-            uint8_t textMessage = 0;
-            uint8_t waypoint = 0;
-            uint8_t focusedModule = 0;
-            uint8_t log = 0;
-            uint8_t settings = 0;
-            uint8_t wifi = 0;
+            uint8_t fault = 255;
+            uint8_t waypoint = 255;
+            uint8_t focusedModule = 255;
+            uint8_t log = 255;
+            uint8_t settings = 255;
+            uint8_t wifi = 255;
+            uint8_t deviceFocused = 255;
+            uint8_t memory = 255;
+            uint8_t gps = 255;
+            uint8_t home = 255;
+            uint8_t textMessage = 255;
+            uint8_t nodelist = 255;
+            uint8_t nodelist_lastheard = 255;
+            uint8_t nodelist_hopsignal = 255;
+            uint8_t nodelist_distance = 255;
+            uint8_t nodelist_bearings = 255;
+            uint8_t clock = 255;
+            uint8_t firstFavorite = 255;
+            uint8_t lastFavorite = 255;
+            uint8_t lora = 255;
         } positions;
 
         uint8_t frameCount = 0;
     } framesetInfo;
 
-    // Which frame we want to be displayed, after we regen the frameset by calling setFrames
-    enum FrameFocus : uint8_t {
-        FOCUS_DEFAULT,  // No specific frame
-        FOCUS_PRESERVE, // Return to the previous frame
-        FOCUS_FAULT,
-        FOCUS_TEXTMESSAGE,
-        FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
-    };
-
-    // Regenerate the normal set of frames, focusing a specific frame if requested
-    // Call when a frame should be added / removed, or custom frames should be cleared
-    void setFrames(FrameFocus focus = FOCUS_DEFAULT);
+    struct DismissedFrames {
+        bool textMessage = false;
+        bool waypoint = false;
+        bool wifi = false;
+        bool memory = false;
+    } dismissedFrames;
 
     /// Try to start drawing ASAP
     void setFastFramerate();
@@ -631,34 +684,6 @@ class Screen : public concurrency::OSThread
     // Sets frame up for immediate drawing
     void setFrameImmediateDraw(FrameCallback *drawFrames);
 
-    /// Called when debug screen is to be drawn, calls through to debugInfo.drawFrame.
-    static void drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-
-    static void drawDebugInfoSettingsTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-
-    static void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-
-#if defined(DISPLAY_CLOCK_FRAME)
-    static void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-
-    static void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-
-    static void drawSegmentedDisplayCharacter(OLEDDisplay *display, int x, int y, uint8_t number, float scale = 1);
-
-    static void drawHorizontalSegment(OLEDDisplay *display, int x, int y, int width, int height);
-
-    static void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int height);
-
-    static void drawSegmentedDisplayColon(OLEDDisplay *display, int x, int y, float scale = 1);
-
-    static void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
-
-    static void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
-
-    // Whether we are showing the digital watch face or the analog one
-    bool digitalWatchFace = true;
-#endif
-
     /// callback for current alert frame
     FrameCallback alertFrame;
 
@@ -691,4 +716,9 @@ class Screen : public concurrency::OSThread
 
 } // namespace graphics
 
+// Extern declarations for function symbols used in UIRenderer
+extern std::vector<std::string> functionSymbol;
+extern std::string functionSymbolString;
+extern graphics::Screen *screen;
+
 #endif

src/graphics/ScreenGlobals.cpp

@@ -0,0 +1,6 @@
+#include <string>
+#include <vector>
+
+// Global variables for screen function overlay
+std::vector<std::string> functionSymbol;
+std::string functionSymbolString;

src/graphics/SharedUIDisplay.cpp

@@ -0,0 +1,394 @@
+#include "graphics/SharedUIDisplay.h"
+#include "RTC.h"
+#include "graphics/ScreenFonts.h"
+#include "main.h"
+#include "meshtastic/config.pb.h"
+#include "power.h"
+#include <OLEDDisplay.h>
+#include <graphics/images.h>
+
+namespace graphics
+{
+
+void determineResolution(int16_t screenheight, int16_t screenwidth)
+{
+    if (screenwidth > 128) {
+        isHighResolution = true;
+    }
+
+    // Special case for Heltec Wireless Tracker v1.1
+    if (screenwidth == 160 && screenheight == 80) {
+        isHighResolution = false;
+    }
+}
+
+// === Shared External State ===
+bool hasUnreadMessage = false;
+bool isMuted = false;
+bool isHighResolution = false;
+
+// === Internal State ===
+bool isBoltVisibleShared = true;
+uint32_t lastBlinkShared = 0;
+bool isMailIconVisible = true;
+uint32_t lastMailBlink = 0;
+
+// *********************************
+// * Rounded Header when inverted *
+// *********************************
+void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w, int16_t h, int16_t r)
+{
+    // Draw the center and side rectangles
+    display->fillRect(x + r, y, w - 2 * r, h);         // center bar
+    display->fillRect(x, y + r, r, h - 2 * r);         // left edge
+    display->fillRect(x + w - r, y + r, r, h - 2 * r); // right edge
+
+    // Draw the rounded corners using filled circles
+    display->fillCircle(x + r + 1, y + r, r);             // top-left
+    display->fillCircle(x + w - r - 1, y + r, r);         // top-right
+    display->fillCircle(x + r + 1, y + h - r - 1, r);     // bottom-left
+    display->fillCircle(x + w - r - 1, y + h - r - 1, r); // bottom-right
+}
+
+// *************************
+// * Common Header Drawing *
+// *************************
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr, bool battery_only)
+{
+    constexpr int HEADER_OFFSET_Y = 1;
+    y += HEADER_OFFSET_Y;
+
+    display->setFont(FONT_SMALL);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    const int xOffset = 4;
+    const int highlightHeight = FONT_HEIGHT_SMALL - 1;
+    const bool isInverted = (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED);
+    const bool isBold = config.display.heading_bold;
+
+    const int screenW = display->getWidth();
+    const int screenH = display->getHeight();
+
+    if (!battery_only) {
+        // === Inverted Header Background ===
+        if (isInverted) {
+            display->setColor(BLACK);
+            display->fillRect(0, 0, screenW, highlightHeight + 2);
+            display->setColor(WHITE);
+            drawRoundedHighlight(display, x, y, screenW, highlightHeight, 2);
+            display->setColor(BLACK);
+        } else {
+            display->setColor(BLACK);
+            display->fillRect(0, 0, screenW, highlightHeight + 2);
+            display->setColor(WHITE);
+            if (isHighResolution) {
+                display->drawLine(0, 20, screenW, 20);
+            } else {
+                display->drawLine(0, 14, screenW, 14);
+            }
+        }
+
+        // === Screen Title ===
+        display->setTextAlignment(TEXT_ALIGN_CENTER);
+        display->drawString(SCREEN_WIDTH / 2, y, titleStr);
+        if (config.display.heading_bold) {
+            display->drawString((SCREEN_WIDTH / 2) + 1, y, titleStr);
+        }
+    }
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    // === Battery State ===
+    int chargePercent = powerStatus->getBatteryChargePercent();
+    bool isCharging = powerStatus->getIsCharging();
+    bool usbPowered = powerStatus->getHasUSB();
+
+    if (chargePercent >= 100) {
+        isCharging = false;
+    }
+    if (chargePercent == 101) {
+        usbPowered = true; // Forcing this flag on for the express purpose that some devices have no concept of having a USB cable
+                           // plugged in
+    }
+
+    uint32_t now = millis();
+
+#ifndef USE_EINK
+    if (isCharging && now - lastBlinkShared > 500) {
+        isBoltVisibleShared = !isBoltVisibleShared;
+        lastBlinkShared = now;
+    }
+#endif
+
+    bool useHorizontalBattery = (isHighResolution && screenW >= screenH);
+    const int textY = y + (highlightHeight - FONT_HEIGHT_SMALL) / 2;
+
+    int batteryX = 1;
+    int batteryY = HEADER_OFFSET_Y + 1;
+
+    // === Battery Icons ===
+    if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
+        batteryX += 1;
+        batteryY += 2;
+        if (isHighResolution) {
+            display->drawXbm(batteryX, batteryY, 19, 12, imgUSB_HighResolution);
+            batteryX += 20; // Icon + 1 pixel
+        } else {
+            display->drawXbm(batteryX, batteryY, 10, 8, imgUSB);
+            batteryX += 11; // Icon + 1 pixel
+        }
+    } else {
+        if (useHorizontalBattery) {
+            batteryX += 1;
+            batteryY += 2;
+            display->drawXbm(batteryX, batteryY, 9, 13, batteryBitmap_h_bottom);
+            display->drawXbm(batteryX + 9, batteryY, 9, 13, batteryBitmap_h_top);
+            if (isCharging && isBoltVisibleShared)
+                display->drawXbm(batteryX + 4, batteryY, 9, 13, lightning_bolt_h);
+            else {
+                display->drawLine(batteryX + 5, batteryY, batteryX + 10, batteryY);
+                display->drawLine(batteryX + 5, batteryY + 12, batteryX + 10, batteryY + 12);
+                int fillWidth = 14 * chargePercent / 100;
+                display->fillRect(batteryX + 1, batteryY + 1, fillWidth, 11);
+            }
+            batteryX += 18; // Icon + 2 pixels
+        } else {
+#ifdef USE_EINK
+            batteryY += 2;
+#endif
+            display->drawXbm(batteryX, batteryY, 7, 11, batteryBitmap_v);
+            if (isCharging && isBoltVisibleShared)
+                display->drawXbm(batteryX + 1, batteryY + 3, 5, 5, lightning_bolt_v);
+            else {
+                display->drawXbm(batteryX - 1, batteryY + 4, 8, 3, batteryBitmap_sidegaps_v);
+                int fillHeight = 8 * chargePercent / 100;
+                int fillY = batteryY - fillHeight;
+                display->fillRect(batteryX + 1, fillY + 10, 5, fillHeight);
+            }
+            batteryX += 9; // Icon + 2 pixels
+        }
+    }
+
+    if (chargePercent != 101) {
+        // === Battery % Display ===
+        char chargeStr[4];
+        snprintf(chargeStr, sizeof(chargeStr), "%d", chargePercent);
+        int chargeNumWidth = display->getStringWidth(chargeStr);
+        display->drawString(batteryX, textY, chargeStr);
+        display->drawString(batteryX + chargeNumWidth - 1, textY, "%");
+        if (isBold) {
+            display->drawString(batteryX + 1, textY, chargeStr);
+            display->drawString(batteryX + chargeNumWidth, textY, "%");
+        }
+    }
+
+    // === Time and Right-aligned Icons ===
+    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true);
+    char timeStr[10] = "--:--";                          // Fallback display
+    int timeStrWidth = display->getStringWidth("12:34"); // Default alignment
+    int timeX = screenW - xOffset - timeStrWidth + 4;
+
+    if (rtc_sec > 0 && !battery_only) {
+        // === Build Time String ===
+        long hms = (rtc_sec % SEC_PER_DAY + SEC_PER_DAY) % SEC_PER_DAY;
+        int hour = hms / SEC_PER_HOUR;
+        int minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+        snprintf(timeStr, sizeof(timeStr), "%d:%02d", hour, minute);
+
+        if (config.display.use_12h_clock) {
+            bool isPM = hour >= 12;
+            hour %= 12;
+            if (hour == 0)
+                hour = 12;
+            snprintf(timeStr, sizeof(timeStr), "%d:%02d%s", hour, minute, isPM ? "p" : "a");
+        }
+
+        timeStrWidth = display->getStringWidth(timeStr);
+        timeX = screenW - xOffset - timeStrWidth + 3;
+
+        // === Show Mail or Mute Icon to the Left of Time ===
+        int iconRightEdge = timeX - 2;
+
+        bool showMail = false;
+
+#ifndef USE_EINK
+        if (hasUnreadMessage) {
+            if (now - lastMailBlink > 500) {
+                isMailIconVisible = !isMailIconVisible;
+                lastMailBlink = now;
+            }
+            showMail = isMailIconVisible;
+        }
+#else
+        if (hasUnreadMessage) {
+            showMail = true;
+        }
+#endif
+
+        if (showMail) {
+            if (useHorizontalBattery) {
+                int iconW = 16, iconH = 12;
+                int iconX = iconRightEdge - iconW;
+                int iconY = textY + (FONT_HEIGHT_SMALL - iconH) / 2 - 1;
+                if (isInverted) {
+                    display->setColor(WHITE);
+                    display->fillRect(iconX - 1, iconY - 1, iconW + 3, iconH + 2);
+                    display->setColor(BLACK);
+                } else {
+                    display->setColor(BLACK);
+                    display->fillRect(iconX - 1, iconY - 1, iconW + 3, iconH + 2);
+                    display->setColor(WHITE);
+                }
+                display->drawRect(iconX, iconY, iconW + 1, iconH);
+                display->drawLine(iconX, iconY, iconX + iconW / 2, iconY + iconH - 4);
+                display->drawLine(iconX + iconW, iconY, iconX + iconW / 2, iconY + iconH - 4);
+            } else {
+                int iconX = iconRightEdge - (mail_width - 2);
+                int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
+                if (isInverted) {
+                    display->setColor(WHITE);
+                    display->fillRect(iconX - 1, iconY - 1, mail_width + 2, mail_height + 2);
+                    display->setColor(BLACK);
+                } else {
+                    display->setColor(BLACK);
+                    display->fillRect(iconX - 1, iconY - 1, mail_width + 2, mail_height + 2);
+                    display->setColor(WHITE);
+                }
+                display->drawXbm(iconX, iconY, mail_width, mail_height, mail);
+            }
+        } else if (isMuted) {
+            if (isHighResolution) {
+                int iconX = iconRightEdge - mute_symbol_big_width;
+                int iconY = textY + (FONT_HEIGHT_SMALL - mute_symbol_big_height) / 2;
+
+                if (isInverted) {
+                    display->setColor(WHITE);
+                    display->fillRect(iconX - 1, iconY - 1, mute_symbol_big_width + 2, mute_symbol_big_height + 2);
+                    display->setColor(BLACK);
+                } else {
+                    display->setColor(BLACK);
+                    display->fillRect(iconX - 1, iconY - 1, mute_symbol_big_width + 2, mute_symbol_big_height + 2);
+                    display->setColor(WHITE);
+                }
+                display->drawXbm(iconX, iconY, mute_symbol_big_width, mute_symbol_big_height, mute_symbol_big);
+            } else {
+                int iconX = iconRightEdge - mute_symbol_width;
+                int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
+
+                if (isInverted) {
+                    display->setColor(WHITE);
+                    display->fillRect(iconX - 1, iconY - 1, mute_symbol_width + 2, mute_symbol_height + 2);
+                    display->setColor(BLACK);
+                } else {
+                    display->setColor(BLACK);
+                    display->fillRect(iconX - 1, iconY - 1, mute_symbol_width + 2, mute_symbol_height + 2);
+                    display->setColor(WHITE);
+                }
+                display->drawXbm(iconX, iconY, mute_symbol_width, mute_symbol_height, mute_symbol);
+            }
+        }
+
+        // === Draw Time ===
+        display->drawString(timeX, textY, timeStr);
+        if (isBold)
+            display->drawString(timeX - 1, textY, timeStr);
+
+    } else {
+        // === No Time Available: Mail/Mute Icon Moves to Far Right ===
+        int iconRightEdge = screenW - xOffset;
+
+        bool showMail = false;
+
+#ifndef USE_EINK
+        if (hasUnreadMessage) {
+            if (now - lastMailBlink > 500) {
+                isMailIconVisible = !isMailIconVisible;
+                lastMailBlink = now;
+            }
+            showMail = isMailIconVisible;
+        }
+#else
+        if (hasUnreadMessage) {
+            showMail = true;
+        }
+#endif
+
+        if (showMail) {
+            if (useHorizontalBattery) {
+                int iconW = 16, iconH = 12;
+                int iconX = iconRightEdge - iconW;
+                int iconY = textY + (FONT_HEIGHT_SMALL - iconH) / 2 - 1;
+                display->drawRect(iconX, iconY, iconW + 1, iconH);
+                display->drawLine(iconX, iconY, iconX + iconW / 2, iconY + iconH - 4);
+                display->drawLine(iconX + iconW, iconY, iconX + iconW / 2, iconY + iconH - 4);
+            } else {
+                int iconX = iconRightEdge - mail_width;
+                int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
+                display->drawXbm(iconX, iconY, mail_width, mail_height, mail);
+            }
+        } else if (isMuted) {
+            if (isHighResolution) {
+                int iconX = iconRightEdge - mute_symbol_big_width;
+                int iconY = textY + (FONT_HEIGHT_SMALL - mute_symbol_big_height) / 2;
+                display->drawXbm(iconX, iconY, mute_symbol_big_width, mute_symbol_big_height, mute_symbol_big);
+            } else {
+                int iconX = iconRightEdge - mute_symbol_width;
+                int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
+                display->drawXbm(iconX, iconY, mute_symbol_width, mute_symbol_height, mute_symbol);
+            }
+        }
+    }
+
+    display->setColor(WHITE); // Reset for other UI
+}
+
+const int *getTextPositions(OLEDDisplay *display)
+{
+    static int textPositions[7]; // Static array that persists beyond function scope
+
+    if (isHighResolution) {
+        textPositions[0] = textZeroLine;
+        textPositions[1] = textFirstLine_medium;
+        textPositions[2] = textSecondLine_medium;
+        textPositions[3] = textThirdLine_medium;
+        textPositions[4] = textFourthLine_medium;
+        textPositions[5] = textFifthLine_medium;
+        textPositions[6] = textSixthLine_medium;
+    } else {
+        textPositions[0] = textZeroLine;
+        textPositions[1] = textFirstLine;
+        textPositions[2] = textSecondLine;
+        textPositions[3] = textThirdLine;
+        textPositions[4] = textFourthLine;
+        textPositions[5] = textFifthLine;
+        textPositions[6] = textSixthLine;
+    }
+    return textPositions;
+}
+
+bool isAllowedPunctuation(char c)
+{
+    const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";
+    return allowed.find(c) != std::string::npos;
+}
+
+std::string sanitizeString(const std::string &input)
+{
+    std::string output;
+    bool inReplacement = false;
+
+    for (char c : input) {
+        if (std::isalnum(static_cast<unsigned char>(c)) || isAllowedPunctuation(c)) {
+            output += c;
+            inReplacement = false;
+        } else {
+            if (!inReplacement) {
+                output += 0xbf; // ISO-8859-1 for inverted question mark
+                inReplacement = true;
+            }
+        }
+    }
+
+    return output;
+}
+
+} // namespace graphics

src/graphics/SharedUIDisplay.h

@@ -0,0 +1,60 @@
+#pragma once
+
+#include <OLEDDisplay.h>
+#include <string>
+
+namespace graphics
+{
+
+// =======================
+// Shared UI Helpers
+// =======================
+
+#define textZeroLine 0
+// Consistent Line Spacing - this is standard for all display and the fall-back spacing
+#define textFirstLine (FONT_HEIGHT_SMALL - 1)
+#define textSecondLine (textFirstLine + (FONT_HEIGHT_SMALL - 5))
+#define textThirdLine (textSecondLine + (FONT_HEIGHT_SMALL - 5))
+#define textFourthLine (textThirdLine + (FONT_HEIGHT_SMALL - 5))
+#define textFifthLine (textFourthLine + (FONT_HEIGHT_SMALL - 5))
+#define textSixthLine (textFifthLine + (FONT_HEIGHT_SMALL - 5))
+
+// Consistent Line Spacing for devices like T114 and TEcho/ThinkNode M1 of devices
+#define textFirstLine_medium (FONT_HEIGHT_SMALL + 1)
+#define textSecondLine_medium (textFirstLine_medium + FONT_HEIGHT_SMALL)
+#define textThirdLine_medium (textSecondLine_medium + FONT_HEIGHT_SMALL)
+#define textFourthLine_medium (textThirdLine_medium + FONT_HEIGHT_SMALL)
+#define textFifthLine_medium (textFourthLine_medium + FONT_HEIGHT_SMALL)
+#define textSixthLine_medium (textFifthLine_medium + FONT_HEIGHT_SMALL)
+
+// Consistent Line Spacing for devices like VisionMaster T190
+#define textFirstLine_large (FONT_HEIGHT_SMALL + 1)
+#define textSecondLine_large (textFirstLine_large + (FONT_HEIGHT_SMALL + 5))
+#define textThirdLine_large (textSecondLine_large + (FONT_HEIGHT_SMALL + 5))
+#define textFourthLine_large (textThirdLine_large + (FONT_HEIGHT_SMALL + 5))
+#define textFifthLine_large (textFourthLine_large + (FONT_HEIGHT_SMALL + 5))
+#define textSixthLine_large (textFifthLine_large + (FONT_HEIGHT_SMALL + 5))
+
+// Quick screen access
+#define SCREEN_WIDTH display->getWidth()
+#define SCREEN_HEIGHT display->getHeight()
+
+// Shared state (declare inside namespace)
+extern bool hasUnreadMessage;
+extern bool isMuted;
+extern bool isHighResolution;
+void determineResolution(int16_t screenheight, int16_t screenwidth);
+
+// Rounded highlight (used for inverted headers)
+void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w, int16_t h, int16_t r);
+
+// Shared battery/time/mail header
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool battery_only = false);
+
+const int *getTextPositions(OLEDDisplay *display);
+
+bool isAllowedPunctuation(char c);
+
+std::string sanitizeString(const std::string &input);
+
+} // namespace graphics

src/graphics/TFTDisplay.cpp

@@ -1,5 +1,6 @@
 #include "configuration.h"
 #include "main.h"
+
 #if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
@@ -14,8 +15,10 @@
 extern SX1509 gpioExtender;
 #endif
 
-#ifndef TFT_MESH
-#define TFT_MESH COLOR565(0x67, 0xEA, 0x94)
+#ifdef TFT_MESH_OVERRIDE
+uint16_t TFT_MESH = TFT_MESH_OVERRIDE;
+#else
+uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
 #endif
 
 #if defined(ST7735S)
@@ -467,7 +470,15 @@ class LGFX : public lgfx::LGFX_Device
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
-
+#if defined(T_WATCH_S3)
+            cfg.panel_width = 240;
+            cfg.panel_height = 240;
+            cfg.memory_width = 240;
+            cfg.memory_height = 320;
+            cfg.offset_x = 0;
+            cfg.offset_y = 0;                             // No vertical shift needed — panel is top-aligned
+            cfg.offset_rotation = 2;                      // Rotate 180° to correct upside-down layout
+#else
             cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
             cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
             cfg.panel_width = TFT_WIDTH;               // actual displayable width
@@ -475,6 +486,7 @@ class LGFX : public lgfx::LGFX_Device
             cfg.offset_x = TFT_OFFSET_X;               // Panel offset amount in X direction
             cfg.offset_y = TFT_OFFSET_Y;               // Panel offset amount in Y direction
             cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is mirrored)
+#endif
 #ifdef TFT_DUMMY_READ_PIXELS
             cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
 #else
@@ -653,7 +665,7 @@ static LGFX *tft = nullptr;
 #include <TFT_eSPI.h> // Graphics and font library for ILI9342 driver chip
 
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
-#elif ARCH_PORTDUINO && HAS_SCREEN != 0 && !HAS_TFT
+#elif ARCH_PORTDUINO
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
 class LGFX : public lgfx::LGFX_Device
@@ -697,11 +709,16 @@ class LGFX : public lgfx::LGFX_Device
         _panel_instance->setBus(&_bus_instance); // set the bus on the panel.
 
         auto cfg = _panel_instance->config(); // Gets a structure for display panel settings.
-        LOG_DEBUG("Height: %d, Width: %d ", settingsMap[displayHeight], settingsMap[displayWidth]);
+        LOG_DEBUG("Width: %d, Height: %d", settingsMap[displayWidth], settingsMap[displayHeight]);
         cfg.pin_cs = settingsMap[displayCS]; // Pin number where CS is connected (-1 = disable)
         cfg.pin_rst = settingsMap[displayReset];
+        if (settingsMap[displayRotate]) {
+            cfg.panel_width = settingsMap[displayHeight]; // actual displayable width
+            cfg.panel_height = settingsMap[displayWidth]; // actual displayable height
+        } else {
             cfg.panel_width = settingsMap[displayWidth];   // actual displayable width
             cfg.panel_height = settingsMap[displayHeight]; // actual displayable height
+        }
         cfg.offset_x = settingsMap[displayOffsetX];             // Panel offset amount in X direction
         cfg.offset_y = settingsMap[displayOffsetY];             // Panel offset amount in Y direction
         cfg.offset_rotation = settingsMap[displayOffsetRotate]; // Rotation direction value offset 0~7 (4~7 is mirrored)
@@ -978,9 +995,9 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 
 #if ARCH_PORTDUINO
     if (settingsMap[displayRotate]) {
-        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
-    } else {
         setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayWidth], settingsMap[configNames::displayHeight]);
+    } else {
+        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
     }
 
 #elif defined(SCREEN_ROTATE)
@@ -1169,6 +1186,8 @@ bool TFTDisplay::connect()
     tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
+#elif ARCH_PORTDUINO
+    tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif

src/graphics/TimeFormatters.cpp

@@ -0,0 +1,103 @@
+#include "TimeFormatters.h"
+#include "configuration.h"
+#include "gps/RTC.h"
+#include "mesh/NodeDB.h"
+#include <cstring>
+
+bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int32_t *daysAgo)
+{
+    // Cache the result - avoid frequent recalculation
+    static uint8_t hoursCached = 0, minutesCached = 0;
+    static uint32_t daysAgoCached = 0;
+    static uint32_t secondsAgoCached = 0;
+    static bool validCached = false;
+
+    // Abort: if timezone not set
+    if (strlen(config.device.tzdef) == 0) {
+        validCached = false;
+        return validCached;
+    }
+
+    // Abort: if invalid pointers passed
+    if (hours == nullptr || minutes == nullptr || daysAgo == nullptr) {
+        validCached = false;
+        return validCached;
+    }
+
+    // Abort: if time seems invalid.. (> 6 months ago, probably seen before RTC set)
+    if (secondsAgo > SEC_PER_DAY * 30UL * 6) {
+        validCached = false;
+        return validCached;
+    }
+
+    // If repeated request, don't bother recalculating
+    if (secondsAgo - secondsAgoCached < 60 && secondsAgoCached != 0) {
+        if (validCached) {
+            *hours = hoursCached;
+            *minutes = minutesCached;
+            *daysAgo = daysAgoCached;
+        }
+        return validCached;
+    }
+
+    // Get local time
+    uint32_t secondsRTC = getValidTime(RTCQuality::RTCQualityDevice, true); // Get local time
+
+    // Abort: if RTC not set
+    if (!secondsRTC) {
+        validCached = false;
+        return validCached;
+    }
+
+    // Get absolute time when last seen
+    uint32_t secondsSeenAt = secondsRTC - secondsAgo;
+
+    // Calculate daysAgo
+    *daysAgo = (secondsRTC / SEC_PER_DAY) - (secondsSeenAt / SEC_PER_DAY); // How many "midnights" have passed
+
+    // Get seconds since midnight
+    uint32_t hms = (secondsRTC - secondsAgo) % SEC_PER_DAY;
+    hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
+
+    // Tear apart hms into hours and minutes
+    *hours = hms / SEC_PER_HOUR;
+    *minutes = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+
+    // Cache the result
+    daysAgoCached = *daysAgo;
+    hoursCached = *hours;
+    minutesCached = *minutes;
+    secondsAgoCached = secondsAgo;
+
+    validCached = true;
+    return validCached;
+}
+
+void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
+{
+    // Use an absolute timestamp in some cases.
+    // Particularly useful with E-Ink displays. Static UI, fewer refreshes.
+    uint8_t timestampHours, timestampMinutes;
+    int32_t daysAgo;
+    bool useTimestamp = deltaToTimestamp(agoSecs, &timestampHours, &timestampMinutes, &daysAgo);
+
+    if (agoSecs < 120) // last 2 mins?
+        snprintf(timeStr, maxLength, "%u seconds ago", agoSecs);
+    // -- if suitable for timestamp --
+    else if (useTimestamp && agoSecs < 15 * SECONDS_IN_MINUTE) // Last 15 minutes
+        snprintf(timeStr, maxLength, "%u minutes ago", agoSecs / SECONDS_IN_MINUTE);
+    else if (useTimestamp && daysAgo == 0) // Today
+        snprintf(timeStr, maxLength, "Last seen: %02u:%02u", (unsigned int)timestampHours, (unsigned int)timestampMinutes);
+    else if (useTimestamp && daysAgo == 1) // Yesterday
+        snprintf(timeStr, maxLength, "Seen yesterday");
+    else if (useTimestamp && daysAgo > 1) // Last six months (capped by deltaToTimestamp method)
+        snprintf(timeStr, maxLength, "%li days ago", (long)daysAgo);
+    // -- if using time delta instead --
+    else if (agoSecs < 120 * 60) // last 2 hrs
+        snprintf(timeStr, maxLength, "%u minutes ago", agoSecs / 60);
+    // Only show hours ago if it's been less than 6 months. Otherwise, we may have bad data.
+    else if ((agoSecs / 60 / 60) < (730 * 6))
+        snprintf(timeStr, maxLength, "%u hours ago", agoSecs / 60 / 60);
+    else
+        snprintf(timeStr, maxLength, "unknown age");
+}

src/graphics/TimeFormatters.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "configuration.h"
+#include "gps/RTC.h"
+#include <airtime.h>
+#include <cstdint>
+
+/**
+ * Convert a delta in seconds ago to timestamp information (hours, minutes, days ago).
+ *
+ * @param secondsAgo Number of seconds ago to convert
+ * @param hours Pointer to store the hours (0-23)
+ * @param minutes Pointer to store the minutes (0-59)
+ * @param daysAgo Pointer to store the number of days ago
+ * @return true if conversion was successful, false if invalid input or time not available
+ */
+bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int32_t *daysAgo);
+
+/**
+ * Get a human-readable string representing the time ago in a format like "2 days, 3 hours, 15 minutes".
+ *
+ * @param agoSecs Number of seconds ago to convert
+ * @param timeStr Pointer to store the resulting string
+ * @param maxLength Maximum length of the resulting string buffer
+ */
+void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);

src/graphics/draw/ClockRenderer.cpp

@@ -0,0 +1,520 @@
+#include "configuration.h"
+#if HAS_SCREEN
+#include "ClockRenderer.h"
+#include "NodeDB.h"
+#include "UIRenderer.h"
+#include "configuration.h"
+#include "gps/GeoCoord.h"
+#include "gps/RTC.h"
+#include "graphics/ScreenFonts.h"
+#include "graphics/SharedUIDisplay.h"
+#include "graphics/emotes.h"
+#include "graphics/images.h"
+#include "main.h"
+
+#if !MESHTASTIC_EXCLUDE_BLUETOOTH
+#include "nimble/NimbleBluetooth.h"
+#endif
+
+namespace graphics
+{
+
+namespace ClockRenderer
+{
+
+void drawSegmentedDisplayColon(OLEDDisplay *display, int x, int y, float scale)
+{
+    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
+    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+
+    uint16_t cellHeight = (segmentWidth * 2) + (segmentHeight * 3) + 8;
+
+    uint16_t topAndBottomX = x + (4 * scale);
+
+    uint16_t quarterCellHeight = cellHeight / 4;
+
+    uint16_t topY = y + quarterCellHeight;
+    uint16_t bottomY = y + (quarterCellHeight * 3);
+
+    display->fillRect(topAndBottomX, topY, segmentHeight, segmentHeight);
+    display->fillRect(topAndBottomX, bottomY, segmentHeight, segmentHeight);
+}
+
+void drawSegmentedDisplayCharacter(OLEDDisplay *display, int x, int y, uint8_t number, float scale)
+{
+    // the numbers 0-9, each expressed as an array of seven boolean (0|1) values encoding the on/off state of
+    // segment {innerIndex + 1}
+    // e.g., to display the numeral '0', segments 1-6 are on, and segment 7 is off.
+    uint8_t numbers[10][7] = {
+        {1, 1, 1, 1, 1, 1, 0}, // 0          Display segment key
+        {0, 1, 1, 0, 0, 0, 0}, // 1                   1
+        {1, 1, 0, 1, 1, 0, 1}, // 2                  ___
+        {1, 1, 1, 1, 0, 0, 1}, // 3              6  |   | 2
+        {0, 1, 1, 0, 0, 1, 1}, // 4                 |_7̲_|
+        {1, 0, 1, 1, 0, 1, 1}, // 5              5  |   | 3
+        {1, 0, 1, 1, 1, 1, 1}, // 6                 |___|
+        {1, 1, 1, 0, 0, 1, 0}, // 7
+        {1, 1, 1, 1, 1, 1, 1}, // 8                   4
+        {1, 1, 1, 1, 0, 1, 1}, // 9
+    };
+
+    // the width and height of each segment's central rectangle:
+    //             _____________________
+    //           ⋰|  (only this part,  |⋱
+    //         ⋰  |   not including    |  ⋱
+    //         ⋱  |   the triangles    |  ⋰
+    //           ⋱|    on the ends)    |⋰
+    //             ‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
+
+    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
+    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+
+    // segment x and y coordinates
+    uint16_t segmentOneX = x + segmentHeight + 2;
+    uint16_t segmentOneY = y;
+
+    uint16_t segmentTwoX = segmentOneX + segmentWidth + 2;
+    uint16_t segmentTwoY = segmentOneY + segmentHeight + 2;
+
+    uint16_t segmentThreeX = segmentTwoX;
+    uint16_t segmentThreeY = segmentTwoY + segmentWidth + 2 + segmentHeight + 2;
+
+    uint16_t segmentFourX = segmentOneX;
+    uint16_t segmentFourY = segmentThreeY + segmentWidth + 2;
+
+    uint16_t segmentFiveX = x;
+    uint16_t segmentFiveY = segmentThreeY;
+
+    uint16_t segmentSixX = x;
+    uint16_t segmentSixY = segmentTwoY;
+
+    uint16_t segmentSevenX = segmentOneX;
+    uint16_t segmentSevenY = segmentTwoY + segmentWidth + 2;
+
+    if (numbers[number][0]) {
+        graphics::ClockRenderer::drawHorizontalSegment(display, segmentOneX, segmentOneY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][1]) {
+        graphics::ClockRenderer::drawVerticalSegment(display, segmentTwoX, segmentTwoY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][2]) {
+        graphics::ClockRenderer::drawVerticalSegment(display, segmentThreeX, segmentThreeY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][3]) {
+        graphics::ClockRenderer::drawHorizontalSegment(display, segmentFourX, segmentFourY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][4]) {
+        graphics::ClockRenderer::drawVerticalSegment(display, segmentFiveX, segmentFiveY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][5]) {
+        graphics::ClockRenderer::drawVerticalSegment(display, segmentSixX, segmentSixY, segmentWidth, segmentHeight);
+    }
+
+    if (numbers[number][6]) {
+        graphics::ClockRenderer::drawHorizontalSegment(display, segmentSevenX, segmentSevenY, segmentWidth, segmentHeight);
+    }
+}
+
+void drawHorizontalSegment(OLEDDisplay *display, int x, int y, int width, int height)
+{
+    int halfHeight = height / 2;
+
+    // draw central rectangle
+    display->fillRect(x, y, width, height);
+
+    // draw end triangles
+    display->fillTriangle(x, y, x, y + height - 1, x - halfHeight, y + halfHeight);
+
+    display->fillTriangle(x + width, y, x + width + halfHeight, y + halfHeight, x + width, y + height - 1);
+}
+
+void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int height)
+{
+    int halfHeight = height / 2;
+
+    // draw central rectangle
+    display->fillRect(x, y, height, width);
+
+    // draw end triangles
+    display->fillTriangle(x + halfHeight, y - halfHeight, x + height - 1, y, x, y);
+
+    display->fillTriangle(x, y + width, x + height - 1, y + width, x + halfHeight, y + width + halfHeight);
+}
+
+/*
+void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode, float scale)
+{
+    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
+    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+
+    if (digitalMode) {
+        uint16_t radius = (segmentWidth + (segmentHeight * 2) + 4) / 2;
+        uint16_t centerX = (x + segmentHeight + 2) + (radius / 2);
+        uint16_t centerY = (y + segmentHeight + 2) + (radius / 2);
+
+        display->drawCircle(centerX, centerY, radius);
+        display->drawCircle(centerX, centerY, radius + 1);
+        display->drawLine(centerX, centerY, centerX, centerY - radius + 3);
+        display->drawLine(centerX, centerY, centerX + radius - 3, centerY);
+    } else {
+        uint16_t segmentOneX = x + segmentHeight + 2;
+        uint16_t segmentOneY = y;
+
+        uint16_t segmentTwoX = segmentOneX + segmentWidth + 2;
+        uint16_t segmentTwoY = segmentOneY + segmentHeight + 2;
+
+        uint16_t segmentThreeX = segmentOneX;
+        uint16_t segmentThreeY = segmentTwoY + segmentWidth + 2;
+
+        uint16_t segmentFourX = x;
+        uint16_t segmentFourY = y + segmentHeight + 2;
+
+        drawHorizontalSegment(display, segmentOneX, segmentOneY, segmentWidth, segmentHeight);
+        drawVerticalSegment(display, segmentTwoX, segmentTwoY, segmentWidth, segmentHeight);
+        drawHorizontalSegment(display, segmentThreeX, segmentThreeY, segmentWidth, segmentHeight);
+        drawVerticalSegment(display, segmentFourX, segmentFourY, segmentWidth, segmentHeight);
+    }
+}
+*/
+// Draw a digital clock
+void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->clear();
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    // === Set Title, Blank for Clock
+    const char *titleStr = "";
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr, true);
+
+#ifdef T_WATCH_S3
+    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
+        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
+    }
+#endif
+
+    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
+    char timeString[16];
+    int hour = 0;
+    int minute = 0;
+    int second = 0;
+    if (rtc_sec > 0) {
+        long hms = rtc_sec % SEC_PER_DAY;
+        hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
+
+        hour = hms / SEC_PER_HOUR;
+        minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+        second = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
+    }
+
+    bool isPM = hour >= 12;
+    // hour = hour > 12 ? hour - 12 : hour;
+    if (config.display.use_12h_clock) {
+        hour %= 12;
+        if (hour == 0)
+            hour = 12;
+        snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
+    } else {
+        snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
+    }
+
+    // Format seconds string
+    char secondString[8];
+    snprintf(secondString, sizeof(secondString), "%02d", second);
+
+#ifdef T_WATCH_S3
+    float scale = 1.5;
+#elif defined(CHATTER_2)
+    float scale = 1.1;
+#else
+    float scale = 0.75;
+    if (isHighResolution) {
+        scale = 1.5;
+    }
+#endif
+
+    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
+    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+
+    // calculate hours:minutes string width
+    uint16_t timeStringWidth = strlen(timeString) * 5;
+
+    for (uint8_t i = 0; i < strlen(timeString); i++) {
+        char character = timeString[i];
+
+        if (character == ':') {
+            timeStringWidth += segmentHeight;
+        } else {
+            timeStringWidth += segmentWidth + (segmentHeight * 2) + 4;
+        }
+    }
+
+    uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
+
+    uint16_t startingHourMinuteTextX = hourMinuteTextX;
+
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
+
+    // iterate over characters in hours:minutes string and draw segmented characters
+    for (uint8_t i = 0; i < strlen(timeString); i++) {
+        char character = timeString[i];
+
+        if (character == ':') {
+            drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
+
+            hourMinuteTextX += segmentHeight + 6;
+        } else {
+            drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
+
+            hourMinuteTextX += segmentWidth + (segmentHeight * 2) + 4;
+        }
+
+        hourMinuteTextX += 5;
+    }
+
+    // draw seconds string
+    display->setFont(FONT_SMALL);
+    int xOffset = (isHighResolution) ? 0 : -1;
+    if (hour >= 10) {
+        xOffset += (isHighResolution) ? 32 : 18;
+    }
+    int yOffset = (isHighResolution) ? 3 : 1;
+#ifdef SENSECAP_INDICATOR
+    yOffset -= 3;
+#endif
+#ifdef T_DECK
+    yOffset -= 5;
+#endif
+    if (config.display.use_12h_clock) {
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
+                            isPM ? "pm" : "am");
+    }
+#ifndef USE_EINK
+    xOffset = (isHighResolution) ? 18 : 10;
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
+                        secondString);
+#endif
+}
+
+void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
+}
+
+// Draw an analog clock
+void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    // === Set Title, Blank for Clock
+    const char *titleStr = "";
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr, true);
+
+#ifdef T_WATCH_S3
+    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
+        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
+    }
+#endif
+    // clock face center coordinates
+    int16_t centerX = display->getWidth() / 2;
+    int16_t centerY = display->getHeight() / 2;
+
+    // clock face radius
+    int16_t radius = 0;
+    if (display->getHeight() < display->getWidth()) {
+        radius = (display->getHeight() / 2) * 0.9;
+    } else {
+        radius = (display->getWidth() / 2) * 0.9;
+    }
+#ifdef T_WATCH_S3
+    radius = (display->getWidth() / 2) * 0.8;
+#endif
+
+    // noon (0 deg) coordinates (outermost circle)
+    int16_t noonX = centerX;
+    int16_t noonY = centerY - radius;
+
+    // second hand radius and y coordinate (outermost circle)
+    int16_t secondHandNoonY = noonY + 1;
+
+    // tick mark outer y coordinate; (first nested circle)
+    int16_t tickMarkOuterNoonY = secondHandNoonY;
+
+    // seconds tick mark inner y coordinate; (second nested circle)
+    double secondsTickMarkInnerNoonY = (double)noonY + 4;
+    if (isHighResolution) {
+        secondsTickMarkInnerNoonY = (double)noonY + 8;
+    }
+
+    // hours tick mark inner y coordinate; (third nested circle)
+    double hoursTickMarkInnerNoonY = (double)noonY + 6;
+    if (isHighResolution) {
+        hoursTickMarkInnerNoonY = (double)noonY + 16;
+    }
+
+    // minute hand y coordinate
+    int16_t minuteHandNoonY = secondsTickMarkInnerNoonY + 4;
+
+    // hour string y coordinate
+    int16_t hourStringNoonY = minuteHandNoonY + 18;
+
+    // hour hand radius and y coordinate
+    int16_t hourHandRadius = radius * 0.35;
+    if (isHighResolution) {
+        hourHandRadius = radius * 0.55;
+    }
+    int16_t hourHandNoonY = centerY - hourHandRadius;
+
+    display->setColor(OLEDDISPLAY_COLOR::WHITE);
+    display->drawCircle(centerX, centerY, radius);
+
+    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
+    if (rtc_sec > 0) {
+        long hms = rtc_sec % SEC_PER_DAY;
+        hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
+
+        // Tear apart hms into h:m:s
+        int hour = hms / SEC_PER_HOUR;
+        int minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+        int second = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
+
+        bool isPM = hour >= 12;
+        if (config.display.use_12h_clock) {
+            isPM = hour >= 12;
+            display->setFont(FONT_SMALL);
+            int yOffset = isHighResolution ? 1 : 0;
+#ifdef USE_EINK
+            yOffset += 3;
+#endif
+            display->drawString(centerX - (display->getStringWidth(isPM ? "pm" : "am") / 2), centerY + yOffset,
+                                isPM ? "pm" : "am");
+        }
+        hour %= 12;
+        if (hour == 0)
+            hour = 12;
+
+        int16_t degreesPerHour = 30;
+        int16_t degreesPerMinuteOrSecond = 6;
+
+        double hourBaseAngle = hour * degreesPerHour;
+        double hourAngleOffset = ((double)minute / 60) * degreesPerHour;
+        double hourAngle = radians(hourBaseAngle + hourAngleOffset);
+
+        double minuteBaseAngle = minute * degreesPerMinuteOrSecond;
+        double minuteAngleOffset = ((double)second / 60) * degreesPerMinuteOrSecond;
+        double minuteAngle = radians(minuteBaseAngle + minuteAngleOffset);
+
+        double secondAngle = radians(second * degreesPerMinuteOrSecond);
+
+        double hourX = sin(-hourAngle) * (hourHandNoonY - centerY) + noonX;
+        double hourY = cos(-hourAngle) * (hourHandNoonY - centerY) + centerY;
+
+        double minuteX = sin(-minuteAngle) * (minuteHandNoonY - centerY) + noonX;
+        double minuteY = cos(-minuteAngle) * (minuteHandNoonY - centerY) + centerY;
+
+        double secondX = sin(-secondAngle) * (secondHandNoonY - centerY) + noonX;
+        double secondY = cos(-secondAngle) * (secondHandNoonY - centerY) + centerY;
+
+        display->setFont(FONT_MEDIUM);
+
+        // draw minute and hour tick marks and hour numbers
+        for (uint16_t angle = 0; angle < 360; angle += 6) {
+            double angleInRadians = radians(angle);
+
+            double sineAngleInRadians = sin(-angleInRadians);
+            double cosineAngleInRadians = cos(-angleInRadians);
+
+            double endX = sineAngleInRadians * (tickMarkOuterNoonY - centerY) + noonX;
+            double endY = cosineAngleInRadians * (tickMarkOuterNoonY - centerY) + centerY;
+
+            if (angle % degreesPerHour == 0) {
+                double startX = sineAngleInRadians * (hoursTickMarkInnerNoonY - centerY) + noonX;
+                double startY = cosineAngleInRadians * (hoursTickMarkInnerNoonY - centerY) + centerY;
+
+                // draw hour tick mark
+                display->drawLine(startX, startY, endX, endY);
+
+                static char buffer[2];
+
+                uint8_t hourInt = (angle / 30);
+
+                if (hourInt == 0) {
+                    hourInt = 12;
+                }
+
+                // hour number x offset needs to be adjusted for some cases
+                int8_t hourStringXOffset;
+                int8_t hourStringYOffset = 13;
+
+                switch (hourInt) {
+                case 3:
+                    hourStringXOffset = 5;
+                    break;
+                case 9:
+                    hourStringXOffset = 7;
+                    break;
+                case 10:
+                case 11:
+                    hourStringXOffset = 8;
+                    break;
+                case 12:
+                    hourStringXOffset = 13;
+                    break;
+                default:
+                    hourStringXOffset = 6;
+                    break;
+                }
+
+                double hourStringX = (sineAngleInRadians * (hourStringNoonY - centerY) + noonX) - hourStringXOffset;
+                double hourStringY = (cosineAngleInRadians * (hourStringNoonY - centerY) + centerY) - hourStringYOffset;
+
+#ifdef T_WATCH_S3
+                // draw hour number
+                display->drawStringf(hourStringX, hourStringY, buffer, "%d", hourInt);
+#else
+#ifdef USE_EINK
+                if (isHighResolution) {
+                    // draw hour number
+                    display->drawStringf(hourStringX, hourStringY, buffer, "%d", hourInt);
+                }
+#else
+                if (isHighResolution && (hourInt == 3 || hourInt == 6 || hourInt == 9 || hourInt == 12)) {
+                    // draw hour number
+                    display->drawStringf(hourStringX, hourStringY, buffer, "%d", hourInt);
+                }
+#endif
+#endif
+            }
+
+            if (angle % degreesPerMinuteOrSecond == 0) {
+                double startX = sineAngleInRadians * (secondsTickMarkInnerNoonY - centerY) + noonX;
+                double startY = cosineAngleInRadians * (secondsTickMarkInnerNoonY - centerY) + centerY;
+
+                if (isHighResolution) {
+                    // draw minute tick mark
+                    display->drawLine(startX, startY, endX, endY);
+                }
+            }
+        }
+
+        // draw hour hand
+        display->drawLine(centerX, centerY, hourX, hourY);
+
+        // draw minute hand
+        display->drawLine(centerX, centerY, minuteX, minuteY);
+#ifndef USE_EINK
+        // draw second hand
+        display->drawLine(centerX, centerY, secondX, secondY);
+#endif
+    }
+}
+
+} // namespace ClockRenderer
+
+} // namespace graphics
+#endif

src/graphics/draw/ClockRenderer.h

@@ -0,0 +1,31 @@
+#pragma once
+
+#include <OLEDDisplay.h>
+#include <OLEDDisplayUi.h>
+
+namespace graphics
+{
+
+/// Forward declarations
+class Screen;
+
+namespace ClockRenderer
+{
+
+// Clock frame functions
+void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+
+// Segmented display functions
+void drawSegmentedDisplayCharacter(OLEDDisplay *display, int x, int y, uint8_t number, float scale = 1);
+void drawSegmentedDisplayColon(OLEDDisplay *display, int x, int y, float scale = 1);
+void drawHorizontalSegment(OLEDDisplay *display, int x, int y, int width, int height);
+void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int height);
+
+// UI elements for clock displays
+// void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
+void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
+
+} // namespace ClockRenderer
+
+} // namespace graphics