Factory reset RTC

* Clock updates and some TDeck corrections

* TDeck Brightness Works in TFT Builds

* Remove HAS_TFT from enabling Brightness, disable Brightness for TDeck

* Add default textMessage frame actions and adjust SharedUIDisplay

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.devcontainer/Dockerfile

@@ -29,6 +29,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     gpg \
     gnupg2 \
     libusb-1.0-0-dev \
+    libuv1-dev \
     libi2c-dev \
     libxcb-xkb-dev \
     libxkbcommon-dev \

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -72,6 +72,15 @@ body:
     validations:
       required: true
 
+  - type: checkboxes
+    id: mui
+    attributes:
+      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      options:
+        - label: Meshtastic UI aka MUI colorTFT
+        - label: InkHUD ePaper
+        - label: OLED slide UI on any display
+
   - type: input
     id: version
     attributes:

.github/actions/build-variant/action.yml

@@ -27,10 +27,10 @@ inputs:
     description: A newline separated list of paths to store as artifacts
     required: false
     default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
+  # include-web-ui:
+  #   description: Include the web UI in the build
+  #   required: false
+  #   default: "false"
   arch:
     description: Processor arch name
     required: true
@@ -43,22 +43,29 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
+    # - name: Get web ui version
+    #   if: inputs.include-web-ui == 'true'
+    #   id: webver
+    #   shell: bash
+    #   run: |
+    #     echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
 
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
+    # - name: Pull web ui
+    #   if: inputs.include-web-ui == 'true'
+    #   uses: dsaltares/fetch-gh-release-asset@master
+    #   with:
+    #     repo: meshtastic/web
+    #     file: build.tar
+    #     target: build.tar
+    #     token: ${{ inputs.github_token }}
+    #     version: tags/v${{ steps.webver.outputs.ver }}
+
+    # - name: Unpack web ui
+    #   if: inputs.include-web-ui == 'true'
+    #   shell: bash
+    #   run: |
+    #     tar -xf build.tar -C data/static
+    #     rm build.tar
 
     - name: Remove debug flags for release
       shell: bash

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev

.github/dependabot.yml

@@ -1,29 +0,0 @@
-#trunk-ignore-all(yamllint/quoted-strings): required by dependabot syntax check
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: /.devcontainer
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-    ignore:
-      - dependency-name: protobufs
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,6 @@
-### ❌ (Please delete all these tips and replace them with your text) ❌
+## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
-## Thank you for sending in a pull request, here's some tips to get started!
+### ❌ (Please delete all these tips and replace them with your text) ❌
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
@@ -12,4 +12,17 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- Please do not submit untested code.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
+
+## 🤝 Attestations
+
+- [ ] I have tested that my proposed changes behave as described.
+- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
+  - [ ] Heltec (Lora32) V3
+  - [ ] LilyGo T-Deck
+  - [ ] LilyGo T-Beam
+  - [ ] RAK WisBlock 4631
+  - [ ] Seeed Studio T-1000E tracker card
+  - [ ] Other (please specify below)

.github/workflows/build_esp32.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware.bin
+          ota_firmware_target: release/bleota.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-c3:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-C3
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-c6:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-C6
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -11,27 +11,30 @@ permissions: read-all
 
 jobs:
   build-esp32-s3:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build ESP32-S3
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-s3.bin
+          ota_firmware_target: release/bleota-s3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_nrf52.yml

@@ -11,20 +11,30 @@ permissions: read-all
 
 jobs:
   build-nrf52:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build NRF52
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
-            release/*.hex
+          pio_platform: nrf52
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-            release/*.zip
-          arch: nrf52840
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_rpi2040.yml

@@ -11,18 +11,28 @@ permissions: read-all
 
 jobs:
   build-rpi2040:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build Raspberry Pi 2040
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
+          pio_platform: rp2xx0
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -11,19 +11,29 @@ permissions: read-all
 
 jobs:
   build-stm32:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v4
 
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Build STM32WL
         id: build
-        uses: ./.github/actions/build-variant
+        uses: meshtastic/gh-action-firmware@main
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
+          pio_platform: stm32wl
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.bin
             release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -1,7 +1,7 @@
 name: Daily Packaging
 on:
   schedule:
-    - cron: 0 9 * * *
+    - cron: 0 2 * * *
   workflow_dispatch:
   push:
     branches:
@@ -30,7 +30,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -26,6 +26,11 @@ on:
         required: false
         type: boolean
         default: false
+      pio_env:
+        description: PlatformIO environment to build
+        required: false
+        type: string
+        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -90,3 +95,5 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
+          build-args: |
+            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/main_matrix.yml

@@ -5,14 +5,20 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -32,12 +38,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -129,6 +135,7 @@ jobs:
       board: ${{ matrix.board }}
 
   build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/build_debian_src.yml
     with:
       series: UNRELEASED
@@ -143,9 +150,10 @@ jobs:
     secrets: inherit
 
   test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-debian-amd64:
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -153,7 +161,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alpine-amd64:
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -161,7 +178,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-debian-arm64:
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -169,7 +195,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-debian-armv7:
+  docker-deb-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -177,17 +203,6 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  after-checks:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [check]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
   gather-artifacts:
     permissions:
       contents: write
@@ -243,7 +258,6 @@ jobs:
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
@@ -332,7 +346,7 @@ jobs:
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
-      - name: Zip linux sources
+      - name: Zip Linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
@@ -342,7 +356,9 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add linux sources to release
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
           gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
@@ -400,9 +416,53 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to release
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware]
+    env:
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ steps.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/nightly.yml

@@ -8,6 +8,7 @@ permissions: read-all
 
 jobs:
   trunk_check:
+    if: github.repository == 'meshtastic/firmware'
     name: Trunk Check and Upload
     runs-on: ubuntu-24.04
 
@@ -21,6 +22,7 @@ jobs:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
 
   trunk_upgrade:
+    if: github.repository == 'meshtastic/firmware'
     # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
     name: Trunk Upgrade (PR)
     runs-on: ubuntu-24.04

.github/workflows/release_channels.yml

@@ -20,7 +20,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series: [plucky, oracular, noble, jammy]
+        series:
+          - jammy # 22.04
+          - noble # 24.04
+          - plucky # 25.04
+          # - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -46,11 +50,14 @@ jobs:
 
   # Create a PR to bump version when a release is Published
   bump-version:
-    if: ${{ github.event.release.published }}
+    if: github.event.action == 'published'
     runs-on: ubuntu-latest
     permissions:
       pull-requests: write
       contents: write
+    defaults:
+      run:
+        shell: bash
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -60,32 +67,45 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Bump version.properties
-        run: >-
-          bin/bump_version.py
+        run: |
+          # Bump version.properties
+          chmod +x ./bin/bump_version.py
+          ./bin/bump_version.py
+
+      - name: Get new release version string
+        run: |
+          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
+        id: new_version
 
       - name: Ensure debian deps are installed
-        shell: bash
         run: |
           sudo apt-get update -y --fix-missing
           sudo apt-get install -y devscripts
 
       - name: Update debian changelog
-        run: >-
-          debian/ci_changelog.sh
+        run: |
+          # Update debian changelog
+          chmod +x ./debian/ci_changelog.sh
+          ./debian/ci_changelog.sh
 
-      - name: Create version.properties pull request
+      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
+        run: |
+          # Bump org.meshtastic.meshtasticd.metainfo.xml
+          pip install -r bin/bump_metainfo/requirements.txt -q
+          chmod +x ./bin/bump_metainfo/bump_metainfo.py
+          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
+        env:
+          PIP_DISABLE_PIP_VERSION_CHECK: 1
+
+      - name: Create Bumps pull request
         uses: peter-evans/create-pull-request@v7
         with:
-          title: Bump version.properties
+          base: ${{ github.event.repository.default_branch }}
+          branch: create-pull-request/bump-version
+          title: Bump release version
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog
+            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,7 +13,8 @@ permissions:
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-22.04
+    if: github.repository == 'meshtastic/firmware'
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -6,7 +6,7 @@ permissions: read-all
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -11,6 +11,7 @@ permissions:
 
 jobs:
   stale_issues:
+    if: github.repository == 'meshtastic/firmware'
     name: Close Stale Issues
     runs-on: ubuntu-latest
 

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.0.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -5,13 +5,18 @@ on:
     - cron: 0 0 * * * # Run every day at midnight
   workflow_dispatch: {}
 
-permissions: read-all
+permissions:
+  contents: read
+  actions: read
+  checks: write
 
 jobs:
   native-tests:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
+    if: github.repository == 'meshtastic/firmware'
     runs-on: test-runner
     steps:
       - name: Checkout code
@@ -44,7 +49,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 18
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/update_protobufs.yml

@@ -33,6 +33,7 @@ jobs:
       - name: Create pull request
         uses: peter-evans/create-pull-request@v7
         with:
+          branch: create-pull-request/update-protobufs
           title: Update protobufs and classes
           add-paths: |
             protobufs

.gitignore

@@ -38,3 +38,6 @@ release/
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
 src/mesh/raspihttp/private_key.pem
+
+# Ignore logo (set at build time with platformio-custom.py)
+data/boot/logo.*

.trunk/configs/.prettierignore

@@ -0,0 +1 @@
+renovate.json

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.11
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.7
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.5.3
-    - trufflehog@3.88.17
-    - yamllint@1.36.0
-    - bandit@1.8.3
-    - checkov@3.2.386
-    - terrascan@1.19.9
-    - trivy@0.60.0
+    - checkov@3.2.450
+    - renovate@41.30.5
+    - prettier@3.6.2
+    - trufflehog@3.89.2
+    - yamllint@1.37.1
+    - bandit@1.8.6
+    - trivy@0.64.1
     - taplo@0.9.3
-    - ruff@0.10.0
+    - ruff@0.12.2
     - isort@6.0.1
-    - markdownlint@0.44.0
-    - oxipng@9.1.4
-    - svgo@3.3.2
+    - markdownlint@0.45.0
+    - oxipng@9.1.5
+    - svgo@4.0.0
     - actionlint@1.7.7
-    - flake8@7.1.2
+    - flake8@7.3.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.24.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]
@@ -38,7 +38,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@22.16.0
 actions:
   disabled:
     - trunk-announce

Dockerfile

@@ -1,20 +1,20 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
 FROM python:3.13-bookworm AS builder
+ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config \
+        curl wget g++ zip git ca-certificates pkg-config \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -24,13 +24,26 @@ WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
+# Fetch web assets
+RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
+    && mkdir -p /tmp/web \
+    && tar -xf /tmp/web.tar -C /tmp/web/ \
+    && gzip -dr /tmp/web \
+    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
@@ -38,14 +51,17 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -54,7 +70,9 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
+# Expose Meshtastic Web UI port from the host
+EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
 
 HEALTHCHECK NONE

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,15 +1,16 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
-
+FROM python:3.13-alpine3.22 AS builder
+ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
+
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone \
+        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -21,23 +22,35 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Alpine Meshtastic daemon" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
 RUN apk --no-cache add \
-        libstdc++ libgpiod yaml-cpp libusb i2c-tools \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+
+# Fetch compiled binary from the builder
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+# Copy config templates
+COPY ./bin/config.d /etc/meshtasticd/available.d
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,7 +2,9 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.10.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -44,13 +46,20 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
-  lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -1,6 +1,8 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -23,10 +25,14 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 

arch/esp32/esp32s3.ini

@@ -3,4 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-

arch/nrf52/nrf52.ini

@@ -1,10 +1,14 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.7.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
+  platformio/nordicnrf52@^10.8.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  # TODO renovate
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
@@ -17,7 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -25,7 +28,8 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore =
   BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -6,7 +6,9 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,6 +1,8 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
+platform =
+  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -15,18 +17,21 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry/EnvironmentTelemetry.cpp>
-  -<modules/Telemetry/AirQualityTelemetry.cpp>
-  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  ${environmental_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
+  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
+  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
+	adafruit/Adafruit seesaw Library@1.7.9
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,10 +39,18 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
+  -luv
+  -std=gnu17
   -std=c++17
+
+lib_ignore =
+  Adafruit NeoPixel
+  Adafruit ST7735 and ST7789 Library
+  SD

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,13 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -23,5 +28,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/rp2xx0/rp2350.ini

@@ -1,8 +1,13 @@
-; Common settings for rp2040 Processor based targets
+; Common settings for rp2350 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -20,5 +25,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/stm32/stm32.ini

@@ -1,44 +1,56 @@
 [stm32_base]
 extends = arduino_base
-platform = platformio/ststm32
-platform_packages = platformio/framework-arduinoststm32@^4.20900.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
+  platformio/ststm32@19.2.0
+platform_packages =
+  # TODO renovate
+  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
+extra_scripts =
+  ${env.extra_scripts}
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
-;board_build.flash_offset = 0x08000000
-
 build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-  -DMESHTASTIC_EXCLUDE_INPUTBROKER
-  -DMESHTASTIC_EXCLUDE_I2C
-  -DMESHTASTIC_EXCLUDE_POWERMON
-  -DMESHTASTIC_EXCLUDE_SCREEN
-  -DMESHTASTIC_EXCLUDE_MQTT
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_PKI
-  -DMESHTASTIC_EXCLUDE_GPS
-;  -DVECT_TAB_OFFSET=0x08000000
-  -DconfigUSE_CMSIS_RTOS_V2=1
-;  -DSPI_MODE_0=SPI_MODE0
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_ATAK=1 ; ATAK is quite big, disable it for big flash savings.
+  -DMESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
+  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
+  -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
+  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
+debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
-  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+  ${radiolib_base.lib_deps}
+
+  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
-  Wire
+  OneButton

bin/99-meshtasticd-udev.rules

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -34,11 +34,12 @@ SRCBIN=.pio/build/$1/firmware.bin
 cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
-pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
-# Remove webserver files from the filesystem and rebuild
-ls -l data/static # Diagnostic list of files
-rm -rf data/static
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
 pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR

bin/build-native.sh

@@ -15,6 +15,7 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
+PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -24,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment native || platformioFailed
-pio run --environment native || platformioFailed
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
+pio pkg install --environment "$PIO_ENV" || platformioFailed
+pio run --environment "$PIO_ENV" || platformioFailed
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rp2xx0.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32wl.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/bump_metainfo/bump_metainfo.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python3
+import argparse
+import xml.etree.ElementTree as ET
+from defusedxml.ElementTree import parse
+from datetime import datetime, timezone
+
+
+# Indent by 2 spaces to align with xml formatting.
+def indent(elem, level=0):
+    i = "\n" + level * "  "
+    if len(elem):
+        if not elem.text or not elem.text.strip():
+            elem.text = i + "  "
+        for child in elem:
+            indent(child, level + 1)
+        if not child.tail or not child.tail.strip():
+            child.tail = i
+    if level and (not elem.tail or not elem.tail.strip()):
+        elem.tail = i
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="Prepend new release entry to metainfo.xml file.")
+    parser.add_argument("--file", help="Path to the metainfo.xml file",
+                        default="org.meshtastic.meshtasticd.metainfo.xml")
+    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
+    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
+                        default=datetime.now(timezone.utc).date().isoformat())
+
+    args = parser.parse_args()
+
+    tree = parse(args.file)
+    root = tree.getroot()
+
+    releases = root.find('releases')
+    if releases is None:
+        raise RuntimeError("<releases> element not found in XML.")
+
+    existing_versions = {
+        release.get('version'): release
+        for release in releases.findall('release')
+    }
+    existing_release = existing_versions.get(args.version)
+
+    if existing_release is not None:
+        if not existing_release.get('date'):
+            print(f"Version {args.version} found without date. Adding date...")
+            existing_release.set('date', args.date)
+        else:
+            print(
+                f"Version {args.version} is already present with date, skipping insertion.")
+    else:
+        new_release = ET.Element('release', {
+            'version': args.version,
+            'date': args.date
+        })
+        url = ET.SubElement(new_release, 'url', {'type': 'details'})
+        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
+
+        releases.insert(0, new_release)
+
+        indent(releases, level=1)
+        releases.tail = "\n"
+
+        print(f"Inserted new release: {args.version}")
+
+    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
+
+
+if __name__ == "__main__":
+    main()

bin/bump_metainfo/requirements.txt

@@ -0,0 +1 @@
+defusedxml==0.7.1

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -6,6 +6,12 @@
 ### Including the "Module:" line!
 ---
 Lora:
+  # Default to auto-detecting the module type
+  # This will be overridden by configs from config.d
+  Module: auto
+
+#  # Uncomment to enable Simulation mode, or use --sim
+#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -90,9 +96,9 @@ Lora:
 ### Some devices, like the pinedio, may require spidev0.1 as a workaround.
 #  spidev: spidev0.0
 
-### Define GPIO buttons here:
+### Deprecated location for User Button:
 
-GPIO:
+#GPIO:
 #  User: 6
 
 ### Define GPS
@@ -109,17 +115,6 @@ I2C:
 
 Display:
 
-### Waveshare 1.44inch LCD HAT
-#  Panel: ST7735S
-#  CS: 8         #Chip Select
-#  DC: 25        # Data/Command pin
-#  Backlight: 24
-#  Width: 128
-#  Height: 128
-#  Reset: 27
-#  OffsetX: 0
-#  OffsetY: 0
-
 ### Adafruit PiTFT 2.8 TFT+Touchscreen
 #  Panel: ILI9341
 #  CS: 8
@@ -174,6 +169,16 @@ Input:
 
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
+### Standard User Button Config
+#  UserButton: 6
+
+### Trackball/Joystick input
+#  TrackballUp: 6
+#  TrackballDown: 19
+#  TrackballLeft: 5
+#  TrackballRight: 26
+#  TrackballPress: 13
+
 ###
 
 Logging:
@@ -182,14 +187,26 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 443 # Port for Webserver & Webservices
+#  Port: 9443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
+
+HostMetrics:
+#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
+#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
+#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
+
+
+Config:
+#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
+#  DisplayMode: COLOR # uncomment to force MUI
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
+  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
 #  MACAddressSource: eth0

bin/config.d/display-waveshare-1-44.yaml

@@ -0,0 +1,26 @@
+### Waveshare 1.44inch LCD HAT
+Display:
+  Panel: ST7735S
+  spidev: spidev0.0  # Specify either the spidev here, or the CS below
+#  CS: 8         #Chip Select # Optional, as this is the default pin for spidev0.0
+  DC: 25        # Data/Command pin
+  Backlight: 24
+  Width: 128
+  Height: 128
+  Reset: 27
+  OffsetX: 2
+  OffsetY: 1
+
+
+#  OffsetY: 31  # These two options are used to properly flip the screen 180 degrees
+#  OffsetRotate: 3
+
+
+Input:
+  TrackballUp: 6
+  TrackballDown: 19
+  TrackballLeft: 5
+  TrackballRight: 26
+  TrackballPress: 13
+  TrackballDirection: FALLING
+#  User: 21

bin/config.d/lora-Adafruit-RFM9x

@@ -1,5 +0,0 @@
-#  Module: RF95  # Adafruit RFM9x
-#  Reset: 25
-#  CS: 7
-#  IRQ: 22
-#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -0,0 +1,6 @@
+Lora:
+  Module: RF95  # Adafruit RFM9x
+  Reset: 25
+  CS: 7
+  IRQ: 22
+#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,3 +1,5 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,11 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Lora:
+  Module: sx1262  # Ebyte E22-900M22S 
+  CS: 8
+  IRQ: 16
+  Busy: 20
+  Reset: 24
+  RXen: 12
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/config.d/lora-piggystick-lr1121.yaml

@@ -0,0 +1,11 @@
+Lora:
+  Module: lr1121
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: 1.8
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -0,0 +1,17 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  RXen: 1
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: ch341
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  # Optional: Reduce power to 10 dBm to
+  # avoid over-drawing the USB port
+  # SX126X_MAX_POWER: 10
+  # Optional: Set the serial number for multi-radio support
+  # USB_Serialnum: 13374201

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -0,0 +1,52 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+#
+# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
+#
+# Pin Connection
+# Waveshare       Orange Pi Zero3
+#   36    3.3V        17
+#   15    MOSI        19
+#   16    MISO        21  
+#   14    CLK         23
+#   38    GND         25
+#   4     BUSY        18
+#   20    RESET       22
+#   5     CS          24
+#   26    DIO1/IRQ    26
+
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pico Lora module
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  # Specify either the spidev1_1 or the CS below, not both!
+  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
+  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
+#  CS:             # CS     PIN_24 -> chip 1, line 233
+#    pin: 24
+#    gpiochip: 1
+#    line: 233
+  SCK:            # SCK     PIN_23 -> chip 1, line 230
+    pin: 23
+    gpiochip: 1
+    line: 230
+  Busy:           # BUSY    PIN_18 -> chip 1, line 78
+    pin: 18
+    gpiochip: 1
+    line: 78
+  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
+    pin: 19
+    gpiochip: 1
+    line: 231
+  MISO:           # MISO    PIN_21 -> chip 1, line 232
+    pin: 21
+    gpiochip: 1
+    line: 232
+  Reset:          # NRST    PIN_22 -> chip 1, line 71
+    pin: 22
+    gpiochip: 1
+    line: 71
+  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
+    pin: 26
+    gpiochip: 1
+    line: 74

bin/device-install.bat

@@ -5,19 +5,26 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
-SET "WEB_APP=0"
 SET "TFT_BUILD=0"
-SET "TFT8=0"
-SET "TFT16=0"
+SET "BIGDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
+
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
@@ -27,14 +34,16 @@ ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -50,11 +59,13 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -88,6 +99,9 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -106,7 +120,7 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GTR 2 (
+IF %ERRORLEVEL% GEQ 2 (
     @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
@@ -121,56 +135,52 @@ CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
 IF "__!ESPTOOL_PORT!__" == "____" (
     CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
 ) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
     CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 @REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
 IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
     SET "TFT_BUILD=1"
-    GOTO tft
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-    GOTO no_tft
 )
 
-:tft
-SET "TFT8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-FOR %%a IN (%TFT8MB%) DO (
+FOR %%a IN (%BIGDB_8MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT8MB%.
-        SET "TFT8=1"
-        GOTO end_loop_tft8mb
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
     )
 )
-:end_loop_tft8mb
+:end_loop_bigdb_8mb
 
-SET "TFT16MB=t-deck"
-FOR %%a IN (%TFT16MB%) DO (
+FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT16MB%.
-        SET "TFT16=1"
-        GOTO end_loop_tft16mb
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
     )
 )
-:end_loop_tft16mb
+:end_loop_bigdb_16mb
 
-IF %TFT8% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 8mb selected."
-IF %TFT16% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 16mb selected."
-
-:no_tft
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
 SET "BASENAME=!FILENAME:firmware-=!"
 CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
 
 @REM Account for S3 and C3 board's different OTA partition.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 FOR %%a IN (%S3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %S3%.
@@ -179,7 +189,6 @@ FOR %%a IN (%S3%) DO (
     )
 )
 
-SET "C3=esp32c3"
 FOR %%a IN (%C3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %C3%.
@@ -194,13 +203,8 @@ SET "OTA_FILENAME=bleota.bin"
 :end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
-IF %WEB_APP% EQU 1 (
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
+@REM Set SPIFFS filename with "littlefs-" prefix.
 SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
 @REM Default offsets.
@@ -208,14 +212,14 @@ CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 SET "OTA_OFFSET=0x260000"
 SET "SPIFFS_OFFSET=0x300000"
 
-@REM Offsets for MUI 8mb.
-IF %TFT8% EQU 1 IF %TFT_BUILD% EQU 1 (
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
     SET "OTA_OFFSET=0x340000"
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUI 16mb.
-IF %TFT16% EQU 1 IF %TFT_BUILD% EQU 1 (
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"
     SET "SPIFFS_OFFSET=0xc90000"
 )
@@ -255,6 +259,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-install.sh

@@ -1,10 +1,62 @@
 #!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
-TFT8=false
-TFT16=false
+BPS_RESET=false
 TFT_BUILD=false
+MCU=""
+
+# Variant groups
+BIGDB_8MB=(
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
+)
+BIGDB_16MB=(
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
+    "t-eth-elite"
+    "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -23,14 +75,14 @@ set -e
 # Usage info
 show_help() {
     cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--1200bps-reset]
 Flash image file to device, but first erasing and writing system information.
 
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
@@ -42,8 +94,8 @@ while [ $# -gt 0 ]; do
         exit 0
         ;;
     -p)
-		ESPTOOL_PORT="$2"
-		shift # Shift past the option argument
+        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
+        shift
         ;;
     -P)
         PYTHON="$2"
@@ -53,8 +105,8 @@ while [ $# -gt 0 ]; do
         FILENAME="$2"
         shift
         ;;
-	--web)
-		WEB_APP=true
+    --1200bps-reset)
+		    BPS_RESET=true
 		    ;;
     --) # Stop parsing options
         shift
@@ -68,57 +120,61 @@ while [ $# -gt 0 ]; do
     shift # Move to the next argument
 done
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-	FILENAME=$1
+if [[ $BPS_RESET == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	exit 0
+fi
+
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
   echo "Filename must be a firmware-* file."
   exit 1
 fi
 
 # Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
     TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
-
-	if [[ $FILENAME == *"picomputer-s3"* || $FILENAME == *"unphone"* || $FILENAME == *"seeed-sensecap-indicator"* ]]; then
-		TFT8=true
-	fi
-
-	if [[ $FILENAME == *"t-deck"* ]]; then
-		TFT16=true
-	fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
 BASENAME="${FILENAME/firmware-/}"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
+    # Default littlefs* offset.
     OFFSET=0x300000
 
     # Default OTA Offset
     OTA_OFFSET=0x260000
 
-	# littlefs* offset for MUI 8mb and OTA OFFSET.
-	if [ "$TFT8" = true ] && [ "$TFT_BUILD" = true ]; then
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
             OFFSET=0x670000
             OTA_OFFSET=0x340000
         fi
+    done
 
-	# littlefs* offset for MUI 16mb and OTA OFFSET.
-	if [ "$TFT16" = true ] && [ "$TFT_BUILD" = true ]; then
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
             OFFSET=0xc90000
             OTA_OFFSET=0x650000
         fi
+    done
 
     # Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
         if [ -n "${FILENAME##*"esp32c3"*}" ]; then
             OTAFILE=bleota.bin
         else
@@ -128,22 +184,18 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         OTAFILE=bleota-s3.bin
     fi
 
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
+    # Set SPIFFS filename with "littlefs-" prefix.
     SPIFFSFILE=littlefs-${BASENAME}
-	fi
 
-	if [[ ! -f $FILENAME ]]; then
+    if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."
         exit 1
     fi
-	if [[ ! -f $OTAFILE ]]; then
+    if [[ ! -f "$OTAFILE" ]]; then
         echo "Error: file ${OTAFILE} wasn't found. Terminating."
         exit 1
     fi
-	if [[ ! -f $SPIFFSFILE ]]; then
+    if [[ ! -f "$SPIFFSFILE" ]]; then
         echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
         exit 1
     fi

bin/device-update.bat

@@ -8,27 +8,31 @@ SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but leave existing system intact.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The .bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -44,15 +48,19 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
     GOTO help
 ) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
     IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
@@ -62,7 +70,6 @@ IF "__!FILENAME!__"=="____" (
     SET "FILENAME=!FILENAME:./=!"
 )
 
-CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
 CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
 IF NOT EXIST !FILENAME! (
     CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
@@ -71,12 +78,15 @@ IF NOT EXIST !FILENAME! (
 
 IF "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash update !FILENAME!."
+    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -95,7 +105,7 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GTR 2 (
+IF %ERRORLEVEL% GEQ 2 (
     @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
@@ -110,10 +120,17 @@ CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
 IF "__!ESPTOOL_PORT!__" == "____" (
     CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
 ) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
     CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
 CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
@@ -134,6 +151,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-update.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,17 +18,29 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
 
+# Check for --change-mode and remove it from arguments
+NEW_ARGS=()
+for arg in "$@"; do
+    if [ "$arg" = "--change-mode" ]; then
+        CHANGE_MODE=true
+    else
+        NEW_ARGS+=("$arg")
+    fi
+done
+
+set -- "${NEW_ARGS[@]}"
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in
@@ -35,7 +48,7 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  export ESPTOOL_PORT=${OPTARG}
+        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
             ;;
         P)  PYTHON=${OPTARG}
             ;;
@@ -50,14 +63,19 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
+if [ "$CHANGE_MODE" = true ]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    echo "Trying to flash update ${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -27,7 +27,7 @@ for subdir, dirs, files in os.walk(rootdir):
                 if c.startswith("env:"):
                     section = config[c].name[4:]
                     if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
                             if "board_level" in config[config[c].name]:
                                 if (
                                     config[config[c].name]["board_level"] == "extra"

bin/meshtasticd.service

@@ -5,10 +5,11 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-User=root
-Group=root
+AmbientCapabilities=CAP_NET_BIND_SERVICE
+User=meshtasticd
+Group=meshtasticd
 Type=simple
-ExecStart=/usr/sbin/meshtasticd
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=Meshtastic
+Comment=Meshtastic App
+Exec=meshtasticd
+Icon=org.meshtastic.meshtasticd
+Terminal=true
+Type=Application
+Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -0,0 +1,133 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<component type="desktop-application">
+  <id>org.meshtastic.meshtasticd</id>
+
+  <name>Meshtastic</name>
+  <summary>Decentralized mesh communication</summary>
+
+  <metadata_license>CC-BY-4.0</metadata_license>
+  <project_license>GPL-3.0-or-later</project_license>
+
+  <developer id="org.meshtastic">
+    <name>Meshtastic</name>
+  </developer>
+
+  <description>
+    <p>
+      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
+    </p>
+  </description>
+
+  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
+
+  <categories>
+    <category>Network</category>
+    <category>Chat</category>
+    <category>HamRadio</category>
+  </categories>
+  <keywords>
+    <keyword>mesh</keyword>
+    <keyword>LoRa</keyword>
+  </keywords>
+
+  <recommends>
+    <control>keyboard</control>
+    <control>pointing</control>
+    <control>touch</control>
+  </recommends>
+  <requires>
+    <display_length compare="ge">360</display_length>
+  </requires>
+
+  <branding>
+    <color type="primary" scheme_preference="light">#97be89</color>
+    <color type="primary" scheme_preference="dark">#206538</color>
+  </branding>
+
+  <content_rating type="oars-1.1">
+    <content_attribute id="social-chat">intense</content_attribute>
+    <content_attribute id="social-location">intense</content_attribute>
+  </content_rating>
+
+  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
+  <url type="homepage">https://meshtastic.org/</url>
+  <url type="donation">https://opencollective.com/meshtastic</url>
+  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
+  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
+
+  <screenshots>
+    <screenshot type="default">
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
+      <caption>Home Dashboard</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
+      <caption>Setup</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
+      <caption>Nodes List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
+      <caption>Chats List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
+      <caption>Messages</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
+      <caption>Map</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
+      <caption>Settings</caption>
+    </screenshot>
+  </screenshots>
+
+  <releases>
+    <release version="2.7.3" date="2025-07-10">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
+    </release>
+    <release version="2.7.2" date="2025-07-04">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
+    </release>
+    <release version="2.7.1" date="2025-06-27">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.1</url>
+    </release>
+    <release version="2.7.0" date="2025-06-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.0</url>
+    </release>
+    <release version="2.6.13" date="2025-06-16">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13</url>
+    </release>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
+    <release version="2.6.10" date="2025-05-25">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
+    </release>
+    <release version="2.6.9" date="2025-05-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
+    </release>
+    <release version="2.6.8" date="2025-05-05">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
+    </release>
+    <release version="2.6.7" date="2025-04-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
+    </release>
+    <release version="2.6.6" date="2025-04-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
+    </release>
+    <release version="2.6.5" date="2025-03-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
+    </release>
+    <release version="2.6.4" date="2025-03-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
+    </release>
+  </releases>
+</component>

bin/org.meshtastic.meshtasticd.svg

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
+<desc>Created with Fabric.js 4.6.0</desc>
+<defs>
+</defs>
+<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
+<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
+</g>
+</svg>

bin/platformio-custom.py

@@ -3,6 +3,7 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+import subprocess
 import json
 import re
 
@@ -83,7 +84,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -92,6 +93,17 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
+# get repository owner if git is installed
+try:
+    r_owner = (
+        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
+        .decode("utf-8")
+        .strip().split("/")
+    )
+    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
+except subprocess.CalledProcessError:
+    repo_owner = "unknown"
+
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -117,6 +129,7 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
+        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")
@@ -131,3 +144,33 @@ for lb in env.GetLibBuilders():
     if lb.name == "meshtastic-device-ui":
         lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
         break
+
+# Get the display resolution from macros
+def get_display_resolution(build_flags):
+    # Check "DISPLAY_SIZE" to determine the screen resolution
+    for flag in build_flags:
+        if isinstance(flag, tuple) and flag[0] == "DISPLAY_SIZE":
+            screen_width, screen_height = map(int, flag[1].split("x"))
+            return screen_width, screen_height
+    print("No screen resolution defined in build_flags. Please define DISPLAY_SIZE.")
+    exit(1)
+
+def load_boot_logo(source, target, env):
+    build_flags = env.get("CPPDEFINES", [])
+    logo_w, logo_h = get_display_resolution(build_flags)
+    print(f"TFT build with {logo_w}x{logo_h} resolution detected")
+
+    # Load the boot logo from `branding/logo_<width>x<height>.png` if it exists
+    source_path = join(env["PROJECT_DIR"], "branding", f"logo_{logo_w}x{logo_h}.png")
+    dest_dir = join(env["PROJECT_DIR"], "data", "boot")
+    dest_path = join(dest_dir, "logo.png")
+    if env.File(source_path).exists():
+        print(f"Loading boot logo from {source_path}")
+        # Prepare the destination
+        env.Execute(f"mkdir -p {dest_dir} && rm -f {dest_path}")
+        # Copy the logo to the `data/boot` directory
+        env.Execute(f"cp {source_path} {dest_path}")
+
+# Load the boot logo on TFT builds
+if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)

bin/rpkg.macros

@@ -2,6 +2,10 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
+function web_version {
+    web_version=$(cat bin/web.version)
+    echo -n "$web_version"
+}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/web.version

@@ -0,0 +1 @@
+2.6.4

boards/ThinkNode-M1.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow eink",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
+  "vendor": "ELECROW"
+}

boards/crowpanel.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N16R8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -10,7 +10,8 @@
     "hwids": [
       ["0x239A", "0x4405"],
       ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
+      ["0x239A", "0x002A"],
+      ["0x2886", "0x1667"]
     ],
     "usb_product": "HT-n5262",
     "mcu": "nrf52840",
@@ -48,6 +49,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/heltec_mesh_pocket.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_pocket",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshpocket/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,6 +18,7 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,6 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x2886", "0x0059"]],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "seeed_solar_node",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_solar_node",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_wio_tracker_L1.json

@@ -0,0 +1,57 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x2886", "0x1668"],
+      ["0x2886", "0x1667"]
+    ],
+    "usb_product": "TRACKER L1",
+    "mcu": "nrf52840",
+    "variant": "seeed_wio_tracker_L1",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_wio_tracker_L1",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-Tracker-L1-p-6477.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_xiao_nrf52840_kit.json

@@ -7,9 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
+    "hwids": [["0x2886", "0x0166"]],
     "usb_product": "XIAO-BOOT",
     "mcu": "nrf52840",
     "variant": "seeed_xiao_nrf52840_kit",

boards/t-watch-s3.json

@@ -16,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -23,16 +24,16 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth", "lora"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
   "frameworks": ["arduino"],
   "name": "LilyGo T-Watch 2020 V3",
   "upload": {
-    "flash_size": "8MB",
+    "flash_size": "16MB",
     "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
+    "maximum_size": 16777216,
     "require_upload_port": true,
     "use_1200bps_touch": true,
     "wait_for_upload_port": true,

boards/tracker-t1000-e.json

@@ -11,7 +11,8 @@
       ["0x239A", "0x8029"],
       ["0x239A", "0x0029"],
       ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
+      ["0x239A", "0x802A"],
+      ["0x2886", "0x0057"]
     ],
     "usb_product": "T1000-E-BOOT",
     "mcu": "nrf52840",

boards/wiscore_rak3312.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DRAK3312",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "rak3312"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "WisCore RAK3312 Board",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.rakwireless.com/en-us",
+  "vendor": "rakwireless"
+}

branding/README.md

@@ -0,0 +1,17 @@
+# Meshtastic Branding / Whitelabeling
+
+This directory is consumed during the creation of **event** firmware.
+
+`bin/platformio-custom.py` determines the display resolution, and locates the corresponding `logo_<width>x<height>.png`.
+
+Ex:
+
+- `logo_800x480.png`
+- `logo_480x480.png`
+- `logo_480x320.png`
+- `logo_320x480.png`
+- `logo_320x240.png`
+
+This file is copied to `data/boot/logo.png` before filesytem image compilation.
+
+For additional examples see the [`event/defcon33` branch](https://github.com/meshtastic/firmware/tree/event/defcon33).

debian/changelog

@@ -1,9 +1,34 @@
-meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
 
+  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [ Ubuntu ]
+  * GitHub Actions Automatic version bump
+
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 10 Jul 2025 16:29:27 +0000

debian/ci_pack_sdeb.sh

@@ -5,13 +5,14 @@ export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 
 # Download libraries to `pio`
-platformio pkg install -e native
-platformio pkg install -e native -t platformio/tool-scons@4.40502.0
+platformio pkg install -e native-tft
+platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the latest meshtastic/web release build.tar to `web.tar`
-curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
+# Download the meshtastic/web release build.tar to `web.tar`
+web_ver=$(cat bin/web.version)
+curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -17,17 +17,23 @@ Build-Depends: debhelper-compat (= 13),
                libbluetooth-dev,
                libusb-1.0-0-dev,
                libi2c-dev,
+               libuv1-dev,
                openssl,
                libssl-dev,
                libulfius-dev,
-               liborcania-dev
+               liborcania-dev,
+               libx11-dev,
+               libinput-dev,
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
 
 Package: meshtasticd
 Architecture: any
-Depends: ${misc:Depends}, ${shlibs:Depends}
+Depends: adduser,
+         ${misc:Depends},
+         ${shlibs:Depends}
 Description: Meshtastic daemon for communicating with Meshtastic devices
  Meshtastic is an off-grid text communication platform that uses inexpensive 
  LoRa radios.

debian/meshtasticd.dirs

@@ -1,3 +1,4 @@
+var/lib/meshtasticd
 etc/meshtasticd
 etc/meshtasticd/config.d
 etc/meshtasticd/available.d

debian/meshtasticd.install

@@ -1,4 +1,4 @@
-.pio/build/native/meshtasticd  usr/sbin
+.pio/build/native-tft/meshtasticd  usr/bin
 
 bin/config.yaml                    etc/meshtasticd
 bin/config.d/*                     etc/meshtasticd/available.d

debian/meshtasticd.postinst

@@ -0,0 +1,80 @@
+#!/bin/sh
+# postinst script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure|reconfigure)
+    # create spi, gpio groups (for udev rules)
+    # these groups already exist on Raspberry Pi OS
+        getent group spi >/dev/null 2>/dev/null || addgroup --system spi
+        getent group gpio >/dev/null 2>/dev/null || addgroup --system gpio
+    # create a meshtasticd group and user
+        getent passwd meshtasticd >/dev/null 2>/dev/null || adduser --system --home /var/lib/meshtasticd --no-create-home meshtasticd
+        getent group meshtasticd >/dev/null 2>/dev/null || addgroup --system meshtasticd
+        adduser meshtasticd meshtasticd >/dev/null 2>/dev/null
+        adduser meshtasticd spi >/dev/null 2>/dev/null
+        adduser meshtasticd gpio >/dev/null 2>/dev/null
+    # add meshtasticd user to appropriate groups (if they exist)
+        getent group plugdev >/dev/null 2>/dev/null && adduser meshtasticd plugdev >/dev/null 2>/dev/null
+        getent group dialout >/dev/null 2>/dev/null && adduser meshtasticd dialout >/dev/null 2>/dev/null
+        getent group i2c >/dev/null 2>/dev/null && adduser meshtasticd i2c >/dev/null 2>/dev/null
+        getent group video >/dev/null 2>/dev/null && adduser meshtasticd video >/dev/null 2>/dev/null
+        getent group audio >/dev/null 2>/dev/null && adduser meshtasticd audio >/dev/null 2>/dev/null
+        getent group input >/dev/null 2>/dev/null && adduser meshtasticd input >/dev/null 2>/dev/null
+
+
+    # migrate /root/.portduino to /var/lib/meshtasticd/.portduino
+    # should only run once, upon upgrade from < 2.6.9
+    if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.6.9; then
+        if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
+            cp -r /root/.portduino /var/lib/meshtasticd/.portduino
+            echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
+            echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
+            echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
+        fi
+    fi
+
+    if [ -d /var/lib/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /var/lib/meshtasticd
+    fi
+
+    if [ -d /etc/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /etc/meshtasticd
+    fi
+
+    if [ -d /usr/share/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /usr/share/meshtasticd
+    fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.postrm

@@ -0,0 +1,41 @@
+#!/bin/sh
+# postrm script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+      # Only remove /var/lib/meshtasticd on purge
+      if [ "${1}" = "purge" ] ; then
+          rm -rf /var/lib/meshtasticd
+      fi
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.udev

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

debian/rules

@@ -26,7 +26,7 @@ override_dh_auto_build:
 	mkdir -p web && tar -xf web.tar -C web
 	gunzip web/ -r
 	# Build with platformio
-	$(PIO_ENV) platformio run -e native
+	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
-	mv .pio/build/native/program .pio/build/native/meshtasticd
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml