WIP

.clusterfuzzlite/build.sh

@@ -51,7 +51,7 @@ for f in .clusterfuzzlite/*_fuzzer.cpp; do
 	fuzzer=$(basename "$f" .cpp)
 	cp -f "$f" src/fuzzer.cpp
 	pio run -vvv --environment "$PIO_ENV"
-	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/meshtasticd"
+	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
 	cp "$program" "$OUT/$fuzzer"
 
 	# Copy shared libraries used by the fuzzer.

.github/actionlint.yaml

@@ -2,5 +2,4 @@
 self-hosted-runner:
   # Labels of self-hosted runner in array of strings.
   labels:
-    - arctastic
     - test-runner

.github/actions/build-variant/action.yml

@@ -102,7 +102,7 @@ runs:
     - name: Store binaries as an artifact
       uses: actions/upload-artifact@v5
       with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true
         path: |
           ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v6
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_firmware.yml

@@ -18,12 +18,11 @@ permissions: read-all
 jobs:
   pio-build:
     name: build-${{ inputs.platform }}
-    # Use 'arctastic' self-hosted runner pool when building in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-24.04
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,29 +55,15 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-        run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
-          echo '```json' >> $GITHUB_STEP_SUMMARY
-          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```' >> $GITHUB_STEP_SUMMARY
-
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v5
         id: upload
         with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true
           path: |
-            release/*.mt.json
             release/*.bin
             release/*.elf
             release/*.uf2
             release/*.hex
-            release/*.zip
-            release/device-*.sh
-            release/device-*.bat
+            release/*-ota.zip

.github/workflows/build_one_arch.yml

@@ -0,0 +1,176 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,6 +15,7 @@ on:
           - rp2040
           - rp2350
           - stm32
+          - native
       target:
         type: string
         required: false
@@ -41,9 +42,10 @@ jobs:
           - rp2040
           - rp2350
           - stm32
+
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -58,13 +60,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -85,6 +87,25 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
   gather-artifacts:
     permissions:
       contents: write
@@ -93,7 +114,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -119,7 +140,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -139,8 +160,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -77,21 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v6
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
+      - uses: actions/checkout@v5
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
   build:
     needs: [setup, version]
@@ -168,7 +163,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -182,17 +177,19 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
-            ./firmware-*.mt.json
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -212,8 +209,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
@@ -221,7 +218,7 @@ jobs:
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -239,14 +236,18 @@ jobs:
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - setup
       - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -283,25 +284,10 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Generate Release manifest
-        run: |
-          jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
-            "version": $ver,
-            "targets": $targets
-          }' > firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v5
-        with:
-          name: manifest-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Add sources to GitHub Release
+      - name: Add Linux sources to GtiHub Release
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{ needs.version.outputs.long }}.json
           gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
           gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
@@ -325,7 +311,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -343,15 +329,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -380,26 +366,19 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - name: Get firmware artifacts
-        uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
-      - name: Get manifest artifact
-        uses: actions/download-artifact@v6
-        with:
-          pattern: manifest-${{ needs.version.outputs.long }}
-          path: ./publish
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,7 +142,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -168,7 +168,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -188,8 +188,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
@@ -197,7 +197,7 @@ jobs:
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -221,7 +221,12 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -285,7 +290,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -303,15 +308,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - uses: actions/download-artifact@v6
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -340,7 +345,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/pr_enforce_labels.yml

@@ -17,7 +17,7 @@ jobs:
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
             const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
             if (!hasRequiredLabel) {
               core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -52,7 +52,7 @@ jobs:
         if: needs.native-tests.result != 'skipped'
         uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Parse test results and create detailed summary

.github/workflows/release_channels.yml

@@ -60,10 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          # Always use master branch for version bumps
-          ref: master
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -102,7 +99,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.1
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
           stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/meshtasticd -s &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -62,7 +62,7 @@ jobs:
         uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -96,7 +96,7 @@ jobs:
         if: always() # run this step even if previous step failed
         uses: actions/upload-artifact@v5
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./testreport.xml
 
@@ -111,7 +111,7 @@ jobs:
         uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -139,11 +139,11 @@ jobs:
       - name: Download test artifacts
         uses: actions/download-artifact@v6
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.3.0
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
@@ -152,7 +152,7 @@ jobs:
       - name: Download coverage artifacts
         uses: actions/download-artifact@v6
         with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
+          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
           merge-multiple: true
 
@@ -165,5 +165,5 @@ jobs:
       - name: Save Code Coverage Report
         uses: actions/upload-artifact@v5
         with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}
+          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,9 +20,9 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
-      # - uses: actions/setup-python@v6
+      # - uses: actions/setup-python@v5
       #   with:
       #     python-version: '3.10'
 

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: true
 
@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.4
+      ref: v1.7.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
-    - renovate@42.42.2
-    - prettier@3.7.4
-    - trufflehog@3.92.1
+    - checkov@3.2.492
+    - renovate@42.5.4
+    - prettier@3.6.2
+    - trufflehog@3.90.13
     - yamllint@1.37.1
-    - bandit@1.9.2
-    - trivy@0.68.1
+    - bandit@1.8.6
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.8
+    - ruff@0.14.4
     - isort@7.0.0
-    - markdownlint@0.46.0
-    - oxipng@10.0.0
+    - markdownlint@0.45.0
+    - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.9
+    - actionlint@1.7.8
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.12.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.29.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

alpine.Dockerfile

@@ -28,7 +28,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.23
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \

arch/esp32/esp32.ini

@@ -2,15 +2,9 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-custom_mtjson_part =
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.12.0
-
-extra_scripts =
-  ${env.extra_scripts}
-  pre:extra_scripts/esp32_pre.py
-  extra_scripts/esp32_extra.py
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -63,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.1
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -7,17 +7,13 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
-extra_scripts =
-  ${env.extra_scripts}
-  extra_scripts/nrf52_extra.py
-
-build_type = release
+build_type = debug
 build_flags =
-  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -25,17 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -Os
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/stm32/stm32.ini

@@ -2,13 +2,13 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.4.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
 extra_scripts =
   ${env.extra_scripts}
-  extra_scripts/stm32_extra.py
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
@@ -37,9 +37,6 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
-  -Wl,--wrap=__assert_func
-  -Wl,--wrap=strerror
-  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/analyze_map.py

@@ -1,165 +0,0 @@
-#!/usr/bin/env python3
-"""Summarise linker map output to highlight heavy object files and libraries.
-
-Usage:
-    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
-
-The script parses GNU ld map files and aggregates section sizes per object file
-and per archive/library, then prints sortable tables that make it easy to spot
-modules worth trimming or hiding behind feature flags.
-"""
-from __future__ import annotations
-
-import argparse
-import collections
-import os
-import re
-import sys
-from typing import DefaultDict, Dict, Tuple
-
-
-SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
-ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
-
-
-def human_size(num_bytes: int) -> str:
-    """Return a friendly size string with one decimal place."""
-    if num_bytes < 1024:
-        return f"{num_bytes:,} B"
-    num = float(num_bytes)
-    for unit in ("KB", "MB", "GB"):
-        num /= 1024.0
-        if num < 1024.0:
-            return f"{num:.1f} {unit}"
-    return f"{num:.1f} TB"
-
-
-def shorten_path(path: str, root: str) -> str:
-    """Prefer repository-relative paths for readability."""
-    path = path.strip()
-    if not path:
-        return path
-
-    # Normalise Windows archives (backslashes) to POSIX style for consistency.
-    path = path.replace("\\", "/")
-
-    # Attempt to strip the root when an absolute path lives inside the repo.
-    if os.path.isabs(path):
-        try:
-            rel = os.path.relpath(path, root)
-            if not rel.startswith(".."):
-                return rel
-        except ValueError:
-            # relpath can fail on mixed drives on Windows; fall back to basename.
-            pass
-    return path
-
-
-def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
-    """Return a human friendly object label and the library it belongs to."""
-    raw_object = raw_object.strip()
-    lib_label = "[app]"
-    match = ARCHIVE_MEMBER_RE.match(raw_object)
-    if match:
-        archive = shorten_path(match.group("archive"), root)
-        obj = match.group("object")
-        lib_label = os.path.basename(archive) or archive
-        label = f"{archive}:{obj}"
-    else:
-        label = shorten_path(raw_object, root)
-        # If the object lives under libs, hint at the containing directory.
-        parent = os.path.basename(os.path.dirname(label))
-        if parent:
-            lib_label = parent
-    return label, lib_label
-
-
-def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
-    per_object: DefaultDict[str, int] = collections.defaultdict(int)
-    per_library: DefaultDict[str, int] = collections.defaultdict(int)
-    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
-
-    try:
-        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
-            for line in handle:
-                match = SECTION_LINE_RE.match(line)
-                if not match:
-                    continue
-
-                section = match.group("section")
-                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
-                    continue
-
-                size = int(match.group("size"), 16)
-                if size == 0:
-                    continue
-
-                obj_token = match.group("object").strip()
-                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
-                    continue
-
-                label, lib_label = describe_object(obj_token, repo_root)
-                per_object[label] += size
-                per_library[lib_label] += size
-                per_object_sections[label][section] += size
-    except FileNotFoundError:
-        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
-
-    return per_object, per_library, per_object_sections
-
-
-def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
-    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
-    parts = []
-    for section, size in items[:limit]:
-        pct = (size / total) * 100 if total else 0
-        parts.append(f"{section} {pct:.1f}%")
-    if len(items) > limit:
-        remainder = total - sum(size for _, size in items[:limit])
-        pct = (remainder / total) * 100 if total else 0
-        parts.append(f"other {pct:.1f}%")
-    return ", ".join(parts)
-
-
-def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
-    total_bytes = sum(per_object.values())
-    if total_bytes == 0:
-        print("No section data found in map file.")
-        return
-
-    print(f"Map file: {map_path}")
-    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
-
-    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
-    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        breakdown = format_section_breakdown(per_object_sections[obj], size)
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
-        print(f"    {obj}")
-        if breakdown:
-            print(f"    sections: {breakdown}")
-    print()
-
-    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
-    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
-
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
-    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
-    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
-    args = parser.parse_args()
-
-    map_path = os.path.abspath(args.map)
-    repo_root = os.path.abspath(os.getcwd())
-
-    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
-    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
-
-
-if __name__ == "__main__":
-    main()

bin/build-esp32.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,27 +14,33 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying ESP32 bin file"
-cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
 
 echo "Copying ESP32 update bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
 
-echo "Copying Filesystem for ESP32 targets"
-cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
-cp bin/device-install.* $OUTDIR/
-cp bin/device-update.* $OUTDIR/
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+echo "Building Filesystem for ESP32 targets"
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -17,19 +17,15 @@ VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 PIO_ENV=${1:-native}
 
-BUILDDIR=.pio/build/$PIO_ENV
-OUTDIR=release
+OUTDIR=release/
 
-rm -f $OUTDIR/meshtasticd*
+rm -f $OUTDIR/firmware*
 
 mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
-basename=meshtasticd-$1-$VERSION
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
 pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
-
-cp "$BUILDDIR/meshtasticd" "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR/
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,37 +14,40 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
+cp $DFUPKG $OUTDIR/$basename-ota.zip
 
-echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
 
-echo "Copying NRF52 UF2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
-cp bin/*.uf2 $OUTDIR/
-
-SRCHEX=$BUILDDIR/$basename.hex
-
-# if WM1110 target, copy the merged.hex
+# if WM1110 target, merge hex with softdevice 7.3.0
 if (echo $1 | grep -q "wio-sdk-wm1110"); then
-	echo "Copying .merged.hex file"
-	SRCHEX=$BUILDDIR/$basename.merged.hex
-	cp $SRCHEX $OUTDIR/
+	echo "Merging with softdevice"
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
 fi
 
 if (echo $1 | grep -q "rak4631"); then
-	echo "Copying .hex file"
-	cp $SRCHEX $OUTDIR/
-fi
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rp2xx0.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,20 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-stm32wl.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,19 +14,16 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
-
-echo "Copying STM32 bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
-
-echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/device-install.bat

@@ -5,14 +5,22 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
+SET "TFT_BUILD=0"
+SET "BIGDB8=0"
+SET "MUIDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
+
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help
@@ -21,7 +29,7 @@ ECHO.
 ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The firmware .factory.bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
@@ -32,12 +40,12 @@ ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.factory.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.factory.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -70,8 +78,8 @@ IF "__!FILENAME!__"=="____" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
     )
-    IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-*.factory.bin file."
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
         GOTO help
     )
     @REM Remove ".\" or "./" file prefix if present.
@@ -85,26 +93,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking for metadata..."
-@REM Derive metadata filename from firmware filename.
-SET "METAFILE=!FILENAME:.factory.bin=!.mt.json"
-IF EXIST !METAFILE! (
-    @REM Print parsed json with powershell
-    CALL :LOG_MESSAGE INFO "Firmware metadata: !METAFILE!"
-    powershell -NoProfile -Command "(Get-Content '!METAFILE!' | ConvertFrom-Json | Out-String).Trim()"
-
-    @REM Save metadata values to variables for later use.
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).mcu"`) DO SET "MCU=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'ota_1' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "OTA_OFFSET=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'spiffs' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "SPIFFS_OFFSET=%%A"
-) ELSE (
-    CALL :LOG_MESSAGE ERROR "No metadata file found: !METAFILE!"
+IF NOT "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
+    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
     GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
 :skip-filename
@@ -114,7 +108,7 @@ IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -152,26 +146,100 @@ IF %BPS_RESET% EQU 1 (
     GOTO eof
 )
 
-@REM Extract PROGNAME from %FILENAME% for later use.
-SET "PROGNAME=!FILENAME:.factory.bin=!"
-CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
-
-IF "__!MCU!__" == "__esp32s3__" (
-    @REM We are working with ESP32-S3
-    SET "OTA_FILENAME=bleota-s3.bin"
-) ELSE IF "__!MCU!__" == "__esp32c3__" (
-    @REM We are working with ESP32-C3
-    SET "OTA_FILENAME=bleota-c3.bin"
+@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
+IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
+    SET "TFT_BUILD=1"
 ) ELSE (
-    @REM Everything else
-    SET "OTA_FILENAME=bleota.bin"
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
 )
+
+FOR %%a IN (%BIGDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
+    )
+)
+:end_loop_bigdb_8mb
+
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
+FOR %%a IN (%BIGDB_16MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
+    )
+)
+:end_loop_bigdb_16mb
+
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
+
+@REM Extract BASENAME from %FILENAME% for later use.
+SET "BASENAME=!FILENAME:firmware-=!"
+CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
+
+@REM Account for S3 and C3 board's different OTA partition.
+FOR %%a IN (%S3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %S3%.
+        SET "OTA_FILENAME=bleota-s3.bin"
+        GOTO :end_loop_s3
+    )
+)
+
+FOR %%a IN (%C3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %C3%.
+        SET "OTA_FILENAME=bleota-c3.bin"
+        GOTO :end_loop_c3
+    )
+)
+
+@REM Everything else
+SET "OTA_FILENAME=bleota.bin"
+:end_loop_s3
+:end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.
-SET "SPIFFS_FILENAME=littlefs-!PROGNAME:firmware-=!.bin"
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
+@REM Default offsets.
+@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+SET "OTA_OFFSET=0x260000"
+SET "SPIFFS_OFFSET=0x300000"
+
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
+    SET "OTA_OFFSET=0x340000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
+    SET "OTA_OFFSET=0x650000"
+    SET "SPIFFS_OFFSET=0xc90000"
+)
+
 CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
 

bin/device-install.sh

@@ -2,15 +2,69 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
+TFT_BUILD=false
 MCU=""
 
 # Constants
 RESET_BAUD=1200
 FIRMWARE_OFFSET=0x00
-# Default littlefs* offset.
-OFFSET=0x300000
-# Default OTA Offset
-OTA_OFFSET=0x260000
+
+# Variant groups
+BIGDB_8MB=(
+    "crowpanel-esp32s3"
+    "heltec_capsule_sensor_v3"
+    "heltec-v3"
+    "heltec-vision-master-e213"
+    "heltec-vision-master-e290"
+    "heltec-vision-master-t190"
+    "heltec-wireless-paper"
+    "heltec-wireless-tracker"
+    "heltec-wsl-v3"
+    "icarus"
+    "seeed-xiao-s3"
+    "tbeam-s3-core"
+    "tracksenger"
+)
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
+)
+BIGDB_16MB=(
+    "dreamcatcher"
+    "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "-v4"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "tlora-pager"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -24,14 +78,6 @@ else
     exit 1
 fi
 
-# Check for jq
-if ! command -v jq >/dev/null 2>&1; then
-    echo "Error: jq not found" >&2
-    echo "Install jq with your package manager." >&2
-    echo "e.g. 'apt install jq', 'dnf install jq', 'brew install jq', etc." >&2
-    exit 1
-fi
-
 set -e
 
 # Usage info
@@ -43,7 +89,7 @@ Flash image file to device, but first erasing and writing system information.
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware *.factory.bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -92,43 +138,69 @@ fi
     shift
 }
 
-if [[ $(basename "$FILENAME") != firmware-*.factory.bin ]]; then
-  echo "Filename must be a firmware-*.factory.bin file."
+if [[ "$FILENAME" != firmware-* ]]; then
+  echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Extract PROGNAME from %FILENAME% for later use.
-PROGNAME="${FILENAME/.factory.bin/}"
-# Derive metadata filename from %PROGNAME%.
-METAFILE="${PROGNAME}.mt.json"
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+fi
 
-if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
-    # Display metadata if it exists
-    if [[ -f "$METAFILE" ]]; then
-        echo "Firmware metadata: ${METAFILE}"
-        jq . "$METAFILE"
-        # Extract relevant fields from metadata
-        if [[ $(jq -r '.part' "$METAFILE") != "null" ]]; then
-            OTA_OFFSET=$(jq -r '.part[] | select(.subtype == "ota_1") | .offset' "$METAFILE")
-            SPIFFS_OFFSET=$(jq -r '.part[] | select(.subtype == "spiffs") | .offset' "$METAFILE")
+# Extract BASENAME from %FILENAME% for later use.
+BASENAME="${FILENAME/firmware-/}"
+
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
+    # Default littlefs* offset.
+    OFFSET=0x300000
+
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
+
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
         fi
-        MCU=$(jq -r '.mcu' "$METAFILE")
-    else
-        echo "ERROR: No metadata file found at ${METAFILE}"
-        exit 1
-    fi
+    done
 
-    # Determine OTA filename based on MCU type
-    if [ "$MCU" == "esp32s3" ]; then
-        OTAFILE=bleota-s3.bin
-    elif [ "$MCU" == "esp32c3" ]; then
-        OTAFILE=bleota-c3.bin
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
+
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
     else
-        OTAFILE=bleota.bin
+        OTAFILE=bleota-s3.bin
     fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
-    SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
+    SPIFFSFILE=littlefs-${BASENAME}
 
     if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."

bin/device-update.bat

@@ -30,11 +30,11 @@ ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -78,12 +78,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *.factory.bin* file. !FILENAME!"
+IF "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
     CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are not working with a *.factory.bin* file. !FILENAME!"
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
 :skip-filename

bin/device-update.sh

@@ -29,7 +29,7 @@ Flash image file to device, leave existing system intact."
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The *.bin file to flash.  Custom to your device type.
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -78,7 +78,7 @@ fi
     shift
 }
 
-if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
     $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else

bin/exception_decoder.py

@@ -75,7 +75,7 @@ TOOLS = {
 }
 
 BACKTRACE_REGEX = re.compile(
-    r"\b(0x4[0-9a-fA-F]{7,8}):0x[0-9a-fA-F]{8}\b"
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
 )
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
 COUNTER_REGEX = re.compile(
@@ -89,7 +89,7 @@ POINTER_REGEX = re.compile(
 STACK_BEGIN = ">>>stack>>>"
 STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    r"^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
 )
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
@@ -223,7 +223,7 @@ class AddressResolver(object):
             if match is None:
                 if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += "\n  \\-> inlined by: " + line
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
             if match.group("result") == "?? ??:0":

bin/native-gdbserver.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-gdbserver --once localhost:2345 .pio/build/native/meshtasticd "$@"
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-.pio/build/native/meshtasticd "$@"
+.pio/build/native/program "$@"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,12 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.17" date="2025-11-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
-    </release>
-    <release version="2.7.16" date="2025-11-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
-    </release>
     <release version="2.7.15" date="2025-11-13">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
     </release>

bin/platformio-custom.py

@@ -2,77 +2,98 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join, basename, isfile
+from os.path import join
 import subprocess
 import json
 import re
+import time
 from datetime import datetime
 
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
-progname = env.get("PROGNAME")
-lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
 
-def manifest_gather(source, target, env):
-    out = []
-    check_paths = [
-        progname,
-        f"{progname}.elf",
-        f"{progname}.bin",
-        f"{progname}.factory.bin",
-        f"{progname}.hex",
-        f"{progname}.merged.hex",
-        f"{progname}.uf2",
-        f"{progname}.factory.uf2",
-        f"{progname}.zip",
-        lfsbin
+
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
+
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
     ]
-    for p in check_paths:
-        f = env.File(env.subst(f"$BUILD_DIR/{p}"))
-        if f.exists():
-            d = {
-                "name": p,
-                "md5": f.get_content_hash(), # Returns MD5 hash
-                "bytes": f.get_size() # Returns file size in bytes
-            }
-            out.append(d)
-            print(d)
-    manifest_write(out, env)
 
-def manifest_write(files, env):
-    manifest = {
-        "version": verObj["long"],
-        "build_epoch": build_epoch,
-        "board": env.get("PIOENV"),
-        "mcu": env.get("BOARD_MCU"),
-        "repo": repo_owner,
-        "files": files,
-        "part": None,
-        "has_mui": False,
-        "has_inkhud": False,
-    }
-    # Get partition table (generated in esp32_pre.py) if it exists
-    if env.get("custom_mtjson_part"):
-        # custom_mtjson_part is a JSON string, convert it back to a dict
-        pj = json.loads(env.get("custom_mtjson_part"))
-        manifest["part"] = pj
-    # Enable has_mui for TFT builds
-    if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-        manifest["has_mui"] = True
-    if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
-        manifest["has_inkhud"] = True
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
 
-    # Write the manifest to the build directory
-    with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
-        json.dump(manifest, f, indent=2)
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
+
+    esptool.main(cmd)
+
+
+if platform.name == "espressif32":
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
+                                        "Generating UF2 file"))
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print(f"Using meshtastic platformio-custom.py, firmware version {verObj['long']} on {env.get('PIOENV')}")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
 # get repository owner if git is installed
 try:
@@ -118,10 +139,10 @@ flags = [
         "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
-print("Using flags:")
+print ("Using flags:")
 for flag in flags:
     print(flag)
-
+    
 projenv.Append(
     CCFLAGS=flags,
 )
@@ -159,22 +180,4 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
-
-mtjson_deps = ["buildprog"]
-if platform.name == "espressif32":
-    # Build littlefs image as part of mtjson target
-    # Equivalent to `pio run -t buildfs`
-    target_lfs = env.DataToBin(
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
-    )
-    mtjson_deps.append(target_lfs)
-
-env.AddCustomTarget(
-    name="mtjson",
-    dependencies=mtjson_deps,
-    actions=[manifest_gather],
-    title="Meshtastic Manifest",
-    description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=False,
-)
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)

bin/platformio-pre.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-Import("env")
-platform = env.PioPlatform()
-
-if platform.name == "native":
-    env.Replace(PROGNAME="meshtasticd")
-else:
-    from readprops import readProps
-    prefsLoc = env["PROJECT_DIR"] + "/version.properties"
-    verObj = readProps(prefsLoc)
-    env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
-
-# Print the new program name for verification
-print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

bin/test-simulator.sh

@@ -3,7 +3,7 @@
 set -e
 
 echo "Starting simulator"
-.pio/build/native/meshtasticd -s &
+.pio/build/native/program &
 sleep 20 # 5 seconds was not enough
 
 echo "Simulator started, launching python test..."

boards/ThinkNode-M3.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M3",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow nrf",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "",
-  "vendor": "ELECROW"
-}

boards/ThinkNode-M6.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m6",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M6",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode M6",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
-  "vendor": "ELECROW"
-}

boards/hackaday-communicator.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "hackaday-communicator"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 1500000
-  },
-  "url": "hackaday.com",
-  "vendor": "hackaday"
-}

boards/heltec_v4.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/muzi-base.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0xcafe"]],
-    "mcu": "nrf52840",
-    "variant": "muzi-base",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Muzi Base",
-  "url": "https://muzi.works/",
-  "vendor": "MuziWorks",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "blackmagic",
-      "cmsis-dap",
-      "mbed",
-      "stlink"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  }
-}

debian/changelog

@@ -1,16 +1,3 @@
-meshtasticd (2.7.17.0) unstable; urgency=medium
-
-  * Version 2.7.17
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 28 Nov 2025 15:11:34 +0000
-
-meshtasticd (2.7.16.0) unstable; urgency=medium
-
-  * Version 2.7.16
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
-
-
 meshtasticd (2.7.15.0) unstable; urgency=medium
 
   * Version 2.7.15

debian/rules

@@ -28,4 +28,5 @@ override_dh_auto_build:
 	# Build with platformio
 	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

extra_scripts/disable_adafruit_usb.py

@@ -1,9 +1,10 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(flake8/F821)
 # trunk-ignore-all(ruff/F821)
 
 Import("env")
 
+# NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
+
 # print("Current CLI targets", COMMAND_LINE_TARGETS)
 # print("Current Build targets", BUILD_TARGETS)
 # print("CPP defs", env.get("CPPDEFINES"))

extra_scripts/esp32_extra.py

@@ -1,86 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-# trunk-ignore-all(ruff/E402): Hacky esptool import
-# trunk-ignore-all(flake8/E402): Hacky esptool import
-import sys
-from os.path import join
-
-Import("env")
-platform = env.PioPlatform()
-
-sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
-import esptool
-
-
-def esp32_create_combined_bin(source, target, env):
-    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
-    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
-    print("Generating combined binary for serial flashing")
-
-    app_offset = 0x10000
-
-    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
-    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
-    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
-    chip = env.get("BOARD_MCU")
-    board = env.BoardConfig()
-    flash_size = board.get("upload.flash_size")
-    flash_freq = board.get("build.f_flash", "40m")
-    flash_freq = flash_freq.replace("000000L", "m")
-    flash_mode = board.get("build.flash_mode", "dio")
-    memory_type = board.get("build.arduino.memory_type", "qio_qspi")
-    if flash_mode == "qio" or flash_mode == "qout":
-        flash_mode = "dio"
-    if memory_type == "opi_opi" or memory_type == "opi_qspi":
-        flash_mode = "dout"
-    cmd = [
-        "--chip",
-        chip,
-        "merge_bin",
-        "-o",
-        new_file_name,
-        "--flash_mode",
-        flash_mode,
-        "--flash_freq",
-        flash_freq,
-        "--flash_size",
-        flash_size,
-    ]
-
-    print("    Offset | File")
-    for section in sections:
-        sect_adr, sect_file = section.split(" ", 1)
-        print(f" -  {sect_adr} | {sect_file}")
-        cmd += [sect_adr, sect_file]
-
-    print(f" - {hex(app_offset)} | {firmware_name}")
-    cmd += [hex(app_offset), firmware_name]
-
-    print("Using esptool.py arguments: %s" % " ".join(cmd))
-
-    esptool.main(cmd)
-
-
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
-
-esp32_kind = env.GetProjectOption("custom_esp32_kind")
-if esp32_kind == "esp32":
-    # Free up some IRAM by removing auxiliary SPI flash chip drivers.
-    # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
-    env.Append(
-        LINKFLAGS=[
-            "-Wl,--wrap=esp_flash_chip_gd",
-            "-Wl,--wrap=esp_flash_chip_issi",
-            "-Wl,--wrap=esp_flash_chip_winbond",
-        ]
-    )
-else:
-    # For newer ESP32 targets, using newlib nano works better.
-    env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

extra_scripts/esp32_pre.py

@@ -1,73 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-import json
-import sys
-from os.path import isfile
-
-Import("env")
-
-
-# From https://github.com/platformio/platform-espressif32/blob/develop/builder/main.py
-def _parse_size(value):
-    if isinstance(value, int):
-        return value
-    elif value.isdigit():
-        return int(value)
-    elif value.startswith("0x"):
-        return int(value, 16)
-    elif value[-1].upper() in ("K", "M"):
-        base = 1024 if value[-1].upper() == "K" else 1024 * 1024
-        return int(value[:-1]) * base
-    return value
-
-
-def _parse_partitions(env):
-    partitions_csv = env.subst("$PARTITIONS_TABLE_CSV")
-    if not isfile(partitions_csv):
-        sys.stderr.write(
-            "Could not find the file %s with partitions " "table.\n" % partitions_csv
-        )
-        env.Exit(1)
-        return
-
-    result = []
-    # The first offset is 0x9000 because partition table is flashed to 0x8000 and
-    # occupies an entire flash sector, which size is 0x1000
-    next_offset = 0x9000
-    with open(partitions_csv) as fp:
-        for line in fp.readlines():
-            line = line.strip()
-            if not line or line.startswith("#"):
-                continue
-            tokens = [t.strip() for t in line.split(",")]
-            if len(tokens) < 5:
-                continue
-
-            bound = 0x10000 if tokens[1] in ("0", "app") else 4
-            calculated_offset = (next_offset + bound - 1) & ~(bound - 1)
-            partition = {
-                "name": tokens[0],
-                "type": tokens[1],
-                "subtype": tokens[2],
-                "offset": tokens[3] or calculated_offset,
-                "size": tokens[4],
-                "flags": tokens[5] if len(tokens) > 5 else None,
-            }
-            result.append(partition)
-            next_offset = _parse_size(partition["offset"]) + _parse_size(
-                partition["size"]
-            )
-
-    return result
-
-
-def mtjson_esp32_part(target, source, env):
-    part = _parse_partitions(env)
-    pj = json.dumps(part)
-    # print(f"JSON_PARTITIONS: {pj}")
-    # Dump json string to 'custom_mtjson_part' variable to use later when writing the manifest
-    env.Replace(custom_mtjson_part=pj)
-
-
-env.AddPreAction("mtjson", mtjson_esp32_part)

extra_scripts/extra_stm32.py

@@ -1,9 +1,7 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 
 Import("env")
-
 # Custom HEX from ELF
 env.AddPostAction(
     "$BUILD_DIR/${PROGNAME}.elf",

extra_scripts/nrf52_extra.py

@@ -1,50 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-import sys
-from os.path import basename
-
-Import("env")
-
-
-# Custom HEX from ELF
-# Convert hex to uf2 for nrf52
-def nrf52_hex_to_uf2(source, target, env):
-    hex_path = target[0].get_abspath()
-    # When using merged hex, drop 'merged' from uf2 filename
-    uf2_path = hex_path.replace(".merged.", ".")
-    uf2_path = uf2_path.replace(".hex", ".uf2")
-    env.Execute(
-        env.VerboseAction(
-            f'"{sys.executable}" ./bin/uf2conv.py "{hex_path}" -c -f 0xADA52840 -o "{uf2_path}"',
-            f"Generating UF2 file from {basename(hex_path)}",
-        )
-    )
-
-
-def nrf52_mergehex(source, target, env):
-    hex_path = target[0].get_abspath()
-    merged_hex_path = hex_path.replace(".hex", ".merged.hex")
-    merge_with = None
-    if "wio-sdk-wm1110" == str(env.get("PIOENV")):
-        merge_with = env.subst("$PROJECT_DIR/bin/s140_nrf52_7.3.0_softdevice.hex")
-    else:
-        print("merge_with not defined for this target")
-
-    if merge_with is not None:
-        env.Execute(
-            env.VerboseAction(
-                f'"$PROJECT_DIR/bin/mergehex" -m "{hex_path}" "{merge_with}" -o "{merged_hex_path}"',
-                "Merging HEX with SoftDevice",
-            )
-        )
-        print(f'Merged file saved at "{basename(merged_hex_path)}"')
-        nrf52_hex_to_uf2([hex_path, merge_with], [env.File(merged_hex_path)], env)
-
-
-# if WM1110 target, merge hex with softdevice 7.3.0
-if "wio-sdk-wm1110" == env.get("PIOENV"):
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_mergehex)
-else:
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_hex_to_uf2)

meshtasticd.spec.rpkg

@@ -76,7 +76,7 @@ platformio run -e native-tft
 %install
 # Install meshtasticd binary
 mkdir -p %{buildroot}%{_bindir}
-install -m 0755 .pio/build/native-tft/meshtasticd %{buildroot}%{_bindir}/meshtasticd
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
 # Install portduino VFS dir
 install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd

platformio.ini

@@ -5,7 +5,7 @@
 default_envs = tbeam
 
 extra_configs =
-	variants/*/*.ini
+	arch/*/*.ini
 	variants/*/*/platformio.ini
 	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -14,9 +14,7 @@ description = Meshtastic
 
 [env]
 test_build_src = true
-extra_scripts =
-	pre:bin/platformio-pre.py
-	bin/platformio-custom.py
+extra_scripts = bin/platformio-custom.py
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
@@ -92,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -117,13 +115,12 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	# jgromes/RadioLib@7.4.0
-	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
+	jgromes/RadioLib@7.3.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -171,7 +168,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.5
+	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -184,8 +181,6 @@ lib_deps =
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -207,7 +202,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
+	ClosedCube OPT3001@1.1.2
 	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
 	boschsensortec/bsec2@1.10.2610
 	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
@@ -215,6 +210,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
+	sensirion/Sensirion Core@0.7.1
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/AudioThread.h

@@ -50,11 +50,8 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-
-        if (rtttlFile != nullptr) {
-            delete rtttlFile;
-            rtttlFile = nullptr;
-        }
+        delete rtttlFile;
+        rtttlFile = nullptr;
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -102,9 +99,9 @@ class AudioThread : public concurrency::OSThread
     };
 
     AudioGeneratorRTTTL *i2sRtttl = nullptr;
-    AudioOutputI2S *audioOut = nullptr;
+    AudioOutputI2S *audioOut;
 
-    AudioFileSourcePROGMEM *rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile;
 };
 
 #endif

src/MessageStore.cpp

@@ -1,426 +0,0 @@
-#include "configuration.h"
-#if HAS_SCREEN
-#include "FSCommon.h"
-#include "MessageStore.h"
-#include "NodeDB.h"
-#include "SPILock.h"
-#include "SafeFile.h"
-#include "gps/RTC.h"
-#include "graphics/draw/MessageRenderer.h"
-#include <cstring> // memcpy
-
-#ifndef MESSAGE_TEXT_POOL_SIZE
-#define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
-#endif
-
-// Global message text pool and state
-static char *g_messagePool = nullptr;
-static size_t g_poolWritePos = 0;
-
-// Reset pool (called on boot or clear)
-static inline void resetMessagePool()
-{
-    if (!g_messagePool) {
-        g_messagePool = static_cast<char *>(malloc(MESSAGE_TEXT_POOL_SIZE));
-        if (!g_messagePool) {
-            LOG_ERROR("MessageStore: Failed to allocate %d bytes for message pool", MESSAGE_TEXT_POOL_SIZE);
-            return;
-        }
-    }
-    g_poolWritePos = 0;
-    memset(g_messagePool, 0, MESSAGE_TEXT_POOL_SIZE);
-}
-
-// Allocate text in pool and return offset
-// If not enough space remains, wrap around (ring buffer style)
-static inline uint16_t storeTextInPool(const char *src, size_t len)
-{
-    if (len >= MAX_MESSAGE_SIZE)
-        len = MAX_MESSAGE_SIZE - 1;
-
-    // Wrap pool if out of space
-    if (g_poolWritePos + len + 1 >= MESSAGE_TEXT_POOL_SIZE) {
-        g_poolWritePos = 0;
-    }
-
-    uint16_t offset = g_poolWritePos;
-    memcpy(&g_messagePool[g_poolWritePos], src, len);
-    g_messagePool[g_poolWritePos + len] = '\0';
-    g_poolWritePos += (len + 1);
-    return offset;
-}
-
-// Retrieve a const pointer to message text by offset
-static inline const char *getTextFromPool(uint16_t offset)
-{
-    if (!g_messagePool || offset >= MESSAGE_TEXT_POOL_SIZE)
-        return "";
-    return &g_messagePool[offset];
-}
-
-// Helper: assign a timestamp (RTC if available, else boot-relative)
-static inline void assignTimestamp(StoredMessage &sm)
-{
-    uint32_t nowSecs = getValidTime(RTCQuality::RTCQualityDevice, true);
-    if (nowSecs) {
-        sm.timestamp = nowSecs;
-        sm.isBootRelative = false;
-    } else {
-        sm.timestamp = millis() / 1000;
-        sm.isBootRelative = true;
-    }
-}
-
-// Generic push with cap (used by live + persisted queues)
-template <typename T> static inline void pushWithLimit(std::deque<T> &queue, const T &msg)
-{
-    if (queue.size() >= MAX_MESSAGES_SAVED)
-        queue.pop_front();
-    queue.push_back(msg);
-}
-
-template <typename T> static inline void pushWithLimit(std::deque<T> &queue, T &&msg)
-{
-    if (queue.size() >= MAX_MESSAGES_SAVED)
-        queue.pop_front();
-    queue.emplace_back(std::move(msg));
-}
-
-MessageStore::MessageStore(const std::string &label)
-{
-    filename = "/Messages_" + label + ".msgs";
-    resetMessagePool(); // initialize text pool on boot
-}
-
-// Live message handling (RAM only)
-void MessageStore::addLiveMessage(StoredMessage &&msg)
-{
-    pushWithLimit(liveMessages, std::move(msg));
-}
-void MessageStore::addLiveMessage(const StoredMessage &msg)
-{
-    pushWithLimit(liveMessages, msg);
-}
-
-// Add from incoming/outgoing packet
-const StoredMessage &MessageStore::addFromPacket(const meshtastic_MeshPacket &packet)
-{
-    StoredMessage sm;
-    assignTimestamp(sm);
-    sm.channelIndex = packet.channel;
-
-    const char *payload = reinterpret_cast<const char *>(packet.decoded.payload.bytes);
-    size_t len = strnlen(payload, MAX_MESSAGE_SIZE - 1);
-    sm.textOffset = storeTextInPool(payload, len);
-    sm.textLength = len;
-
-    // Determine sender
-    uint32_t localNode = nodeDB->getNodeNum();
-    sm.sender = (packet.from == 0) ? localNode : packet.from;
-
-    sm.dest = packet.to;
-
-    bool isDM = (sm.dest != 0 && sm.dest != NODENUM_BROADCAST);
-
-    if (packet.from == 0) {
-        sm.type = isDM ? MessageType::DM_TO_US : MessageType::BROADCAST;
-        sm.ackStatus = AckStatus::NONE;
-    } else {
-        sm.type = isDM ? MessageType::DM_TO_US : MessageType::BROADCAST;
-        sm.ackStatus = AckStatus::ACKED;
-    }
-
-    addLiveMessage(sm);
-    return liveMessages.back();
-}
-
-// Outgoing/manual message
-void MessageStore::addFromString(uint32_t sender, uint8_t channelIndex, const std::string &text)
-{
-    StoredMessage sm;
-
-    // Always use our local time (helper handles RTC vs boot time)
-    assignTimestamp(sm);
-
-    sm.sender = sender;
-    sm.channelIndex = channelIndex;
-    sm.textOffset = storeTextInPool(text.c_str(), text.size());
-    sm.textLength = text.size();
-
-    // Use the provided destination
-    sm.dest = sender;
-    sm.type = MessageType::DM_TO_US;
-
-    // Outgoing messages always start with unknown ack status
-    sm.ackStatus = AckStatus::NONE;
-
-    addLiveMessage(sm);
-}
-
-#if ENABLE_MESSAGE_PERSISTENCE
-
-// Compact, fixed-size on-flash representation using offset + length
-struct __attribute__((packed)) StoredMessageRecord {
-    uint32_t timestamp;
-    uint32_t sender;
-    uint8_t channelIndex;
-    uint32_t dest;
-    uint8_t isBootRelative;
-    uint8_t ackStatus;           // static_cast<uint8_t>(AckStatus)
-    uint8_t type;                // static_cast<uint8_t>(MessageType)
-    uint16_t textLength;         // message length
-    char text[MAX_MESSAGE_SIZE]; // store actual text here
-};
-
-// Serialize one StoredMessage to flash
-static inline void writeMessageRecord(SafeFile &f, const StoredMessage &m)
-{
-    StoredMessageRecord rec = {};
-    rec.timestamp = m.timestamp;
-    rec.sender = m.sender;
-    rec.channelIndex = m.channelIndex;
-    rec.dest = m.dest;
-    rec.isBootRelative = m.isBootRelative;
-    rec.ackStatus = static_cast<uint8_t>(m.ackStatus);
-    rec.type = static_cast<uint8_t>(m.type);
-    rec.textLength = m.textLength;
-
-    // Copy the actual text into the record from RAM pool
-    const char *txt = getTextFromPool(m.textOffset);
-    strncpy(rec.text, txt, MAX_MESSAGE_SIZE - 1);
-    rec.text[MAX_MESSAGE_SIZE - 1] = '\0';
-
-    f.write(reinterpret_cast<const uint8_t *>(&rec), sizeof(rec));
-}
-
-// Deserialize one StoredMessage from flash; returns false on short read
-static inline bool readMessageRecord(File &f, StoredMessage &m)
-{
-    StoredMessageRecord rec = {};
-    if (f.readBytes(reinterpret_cast<char *>(&rec), sizeof(rec)) != sizeof(rec))
-        return false;
-
-    m.timestamp = rec.timestamp;
-    m.sender = rec.sender;
-    m.channelIndex = rec.channelIndex;
-    m.dest = rec.dest;
-    m.isBootRelative = rec.isBootRelative;
-    m.ackStatus = static_cast<AckStatus>(rec.ackStatus);
-    m.type = static_cast<MessageType>(rec.type);
-    m.textLength = rec.textLength;
-
-    // 💡 Re-store text into pool and update offset
-    m.textLength = strnlen(rec.text, MAX_MESSAGE_SIZE - 1);
-    m.textOffset = storeTextInPool(rec.text, m.textLength);
-
-    return true;
-}
-
-void MessageStore::saveToFlash()
-{
-#ifdef FSCom
-    // Ensure root exists
-    spiLock->lock();
-    FSCom.mkdir("/");
-    spiLock->unlock();
-
-    SafeFile f(filename.c_str(), false);
-
-    spiLock->lock();
-    uint8_t count = static_cast<uint8_t>(liveMessages.size());
-    if (count > MAX_MESSAGES_SAVED)
-        count = MAX_MESSAGES_SAVED;
-    f.write(&count, 1);
-
-    for (uint8_t i = 0; i < count; ++i) {
-        writeMessageRecord(f, liveMessages[i]);
-    }
-    spiLock->unlock();
-
-    f.close();
-#endif
-}
-
-void MessageStore::loadFromFlash()
-{
-    std::deque<StoredMessage>().swap(liveMessages);
-    resetMessagePool(); // reset pool when loading
-
-#ifdef FSCom
-    concurrency::LockGuard guard(spiLock);
-
-    if (!FSCom.exists(filename.c_str()))
-        return;
-
-    auto f = FSCom.open(filename.c_str(), FILE_O_READ);
-    if (!f)
-        return;
-
-    uint8_t count = 0;
-    f.readBytes(reinterpret_cast<char *>(&count), 1);
-    if (count > MAX_MESSAGES_SAVED)
-        count = MAX_MESSAGES_SAVED;
-
-    for (uint8_t i = 0; i < count; ++i) {
-        StoredMessage m;
-        if (!readMessageRecord(f, m))
-            break;
-        liveMessages.push_back(m);
-    }
-
-    f.close();
-#endif
-}
-
-#else
-// If persistence is disabled, these functions become no-ops
-void MessageStore::saveToFlash() {}
-void MessageStore::loadFromFlash() {}
-#endif
-
-// Clear all messages (RAM + persisted queue)
-void MessageStore::clearAllMessages()
-{
-    std::deque<StoredMessage>().swap(liveMessages);
-    resetMessagePool();
-
-#ifdef FSCom
-    SafeFile f(filename.c_str(), false);
-    uint8_t count = 0;
-    f.write(&count, 1); // write "0 messages"
-    f.close();
-#endif
-}
-
-// Internal helper: erase first or last message matching a predicate
-template <typename Predicate> static void eraseIf(std::deque<StoredMessage> &deque, Predicate pred, bool fromBack = false)
-{
-    if (fromBack) {
-        // Iterate from the back and erase all matches from the end
-        for (auto it = deque.rbegin(); it != deque.rend();) {
-            if (pred(*it)) {
-                it = std::deque<StoredMessage>::reverse_iterator(deque.erase(std::next(it).base()));
-            } else {
-                ++it;
-            }
-        }
-    } else {
-        // Manual forward search to erase all matches
-        for (auto it = deque.begin(); it != deque.end();) {
-            if (pred(*it)) {
-                it = deque.erase(it);
-            } else {
-                ++it;
-            }
-        }
-    }
-}
-
-// Delete oldest message (RAM + persisted queue)
-void MessageStore::deleteOldestMessage()
-{
-    eraseIf(liveMessages, [](StoredMessage &) { return true; });
-    saveToFlash();
-}
-
-// Delete oldest message in a specific channel
-void MessageStore::deleteOldestMessageInChannel(uint8_t channel)
-{
-    auto pred = [channel](const StoredMessage &m) { return m.type == MessageType::BROADCAST && m.channelIndex == channel; };
-    eraseIf(liveMessages, pred);
-    saveToFlash();
-}
-
-void MessageStore::deleteAllMessagesInChannel(uint8_t channel)
-{
-    auto pred = [channel](const StoredMessage &m) { return m.type == MessageType::BROADCAST && m.channelIndex == channel; };
-    eraseIf(liveMessages, pred, false /* delete ALL, not just first */);
-    saveToFlash();
-}
-
-void MessageStore::deleteAllMessagesWithPeer(uint32_t peer)
-{
-    uint32_t local = nodeDB->getNodeNum();
-    auto pred = [&](const StoredMessage &m) {
-        if (m.type != MessageType::DM_TO_US)
-            return false;
-        uint32_t other = (m.sender == local) ? m.dest : m.sender;
-        return other == peer;
-    };
-    eraseIf(liveMessages, pred, false);
-    saveToFlash();
-}
-
-// Delete oldest message in a direct chat with a node
-void MessageStore::deleteOldestMessageWithPeer(uint32_t peer)
-{
-    auto pred = [peer](const StoredMessage &m) {
-        if (m.type != MessageType::DM_TO_US)
-            return false;
-        uint32_t other = (m.sender == nodeDB->getNodeNum()) ? m.dest : m.sender;
-        return other == peer;
-    };
-    eraseIf(liveMessages, pred);
-    saveToFlash();
-}
-
-std::deque<StoredMessage> MessageStore::getChannelMessages(uint8_t channel) const
-{
-    std::deque<StoredMessage> result;
-    for (const auto &m : liveMessages) {
-        if (m.type == MessageType::BROADCAST && m.channelIndex == channel) {
-            result.push_back(m);
-        }
-    }
-    return result;
-}
-
-std::deque<StoredMessage> MessageStore::getDirectMessages() const
-{
-    std::deque<StoredMessage> result;
-    for (const auto &m : liveMessages) {
-        if (m.type == MessageType::DM_TO_US) {
-            result.push_back(m);
-        }
-    }
-    return result;
-}
-
-// Upgrade boot-relative timestamps once RTC is valid
-// Only same-boot boot-relative messages are healed.
-// Persisted boot-relative messages from old boots stay ??? forever.
-void MessageStore::upgradeBootRelativeTimestamps()
-{
-    uint32_t nowSecs = getValidTime(RTCQuality::RTCQualityDevice, true);
-    if (nowSecs == 0)
-        return; // Still no valid RTC
-
-    uint32_t bootNow = millis() / 1000;
-
-    auto fix = [&](std::deque<StoredMessage> &dq) {
-        for (auto &m : dq) {
-            if (m.isBootRelative && m.timestamp <= bootNow) {
-                uint32_t bootOffset = nowSecs - bootNow;
-                m.timestamp += bootOffset;
-                m.isBootRelative = false;
-            }
-        }
-    };
-    fix(liveMessages);
-}
-
-const char *MessageStore::getText(const StoredMessage &msg)
-{
-    // Wrapper around the internal helper
-    return getTextFromPool(msg.textOffset);
-}
-
-uint16_t MessageStore::storeText(const char *src, size_t len)
-{
-    // Wrapper around the internal helper
-    return storeTextInPool(src, len);
-}
-
-// Global definition
-MessageStore messageStore("default");
-#endif

src/MessageStore.h

@@ -1,131 +0,0 @@
-#pragma once
-
-#if HAS_SCREEN
-
-// Disable debug logging entirely on release builds of HELTEC_MESH_SOLAR for space constraints
-#if defined(HELTEC_MESH_SOLAR)
-#define LOG_DEBUG(...)
-#endif
-
-// Enable or disable message persistence (flash storage)
-// Define -DENABLE_MESSAGE_PERSISTENCE=0 in build_flags to disable it entirely
-#ifndef ENABLE_MESSAGE_PERSISTENCE
-#define ENABLE_MESSAGE_PERSISTENCE 1
-#endif
-
-#include "mesh/generated/meshtastic/mesh.pb.h"
-#include <cstdint>
-#include <deque>
-#include <string>
-
-// How many messages are stored (RAM + flash).
-// Define -DMESSAGE_HISTORY_LIMIT=N in build_flags to control memory usage.
-#ifndef MESSAGE_HISTORY_LIMIT
-#define MESSAGE_HISTORY_LIMIT 20
-#endif
-
-// Internal alias used everywhere in code – do NOT redefine elsewhere.
-#define MAX_MESSAGES_SAVED MESSAGE_HISTORY_LIMIT
-
-// Maximum text payload size per message in bytes.
-// This still defines the max message length, but we no longer reserve this space per message.
-#define MAX_MESSAGE_SIZE 220
-
-// Total shared text pool size for all messages combined.
-// The text pool is RAM-only. Text is re-stored from flash into the pool on boot.
-#ifndef MESSAGE_TEXT_POOL_SIZE
-#define MESSAGE_TEXT_POOL_SIZE (MAX_MESSAGES_SAVED * MAX_MESSAGE_SIZE)
-#endif
-
-// Explicit message classification
-enum class MessageType : uint8_t {
-    BROADCAST = 0, // broadcast message
-    DM_TO_US = 1   // direct message addressed to this node
-};
-
-// Delivery status for messages we sent
-enum class AckStatus : uint8_t {
-    NONE = 0,    // just sent, waiting (no symbol shown)
-    ACKED = 1,   // got a valid ACK from destination
-    NACKED = 2,  // explicitly failed
-    TIMEOUT = 3, // no ACK after retry window
-    RELAYED = 4  // got an ACK from relay, not destination
-};
-
-struct StoredMessage {
-    uint32_t timestamp;   // When message was created (secs since boot or RTC)
-    uint32_t sender;      // NodeNum of sender
-    uint8_t channelIndex; // Channel index used
-    uint32_t dest;        // Destination node (broadcast or direct)
-    MessageType type;     // Derived from dest (explicit classification)
-    bool isBootRelative;  // true = millis()/1000 fallback; false = epoch/RTC absolute
-    AckStatus ackStatus;  // Delivery status (only meaningful for our own sent messages)
-
-    // Text storage metadata — rebuilt from flash at boot
-    uint16_t textOffset; // Offset into global text pool (valid only after loadFromFlash())
-    uint16_t textLength; // Length of text in bytes
-
-    // Default constructor initializes all fields safely
-    StoredMessage()
-        : timestamp(0), sender(0), channelIndex(0), dest(0xffffffff), type(MessageType::BROADCAST), isBootRelative(false),
-          ackStatus(AckStatus::NONE), textOffset(0), textLength(0)
-    {
-    }
-};
-
-class MessageStore
-{
-  public:
-    explicit MessageStore(const std::string &label);
-
-    // Live RAM methods (always current, used by UI and runtime)
-    void addLiveMessage(StoredMessage &&msg);
-    void addLiveMessage(const StoredMessage &msg); // convenience overload
-    const std::deque<StoredMessage> &getLiveMessages() const { return liveMessages; }
-
-    // Add new messages from packets or manual input
-    const StoredMessage &addFromPacket(const meshtastic_MeshPacket &mp);                // Incoming/outgoing → RAM only
-    void addFromString(uint32_t sender, uint8_t channelIndex, const std::string &text); // Manual add
-
-    // Persistence methods (used only on boot/shutdown)
-    void saveToFlash();   // Save messages to flash
-    void loadFromFlash(); // Load messages from flash
-
-    // Clear all messages (RAM + persisted queue + text pool)
-    void clearAllMessages();
-
-    // Delete helpers
-    void deleteOldestMessage(); // remove oldest from RAM (and flash on save)
-    void deleteOldestMessageInChannel(uint8_t channel);
-    void deleteOldestMessageWithPeer(uint32_t peer);
-    void deleteAllMessagesInChannel(uint8_t channel);
-    void deleteAllMessagesWithPeer(uint32_t peer);
-
-    // Unified accessor (for UI code, defaults to RAM buffer)
-    const std::deque<StoredMessage> &getMessages() const { return liveMessages; }
-
-    // Helper filters for future use
-    std::deque<StoredMessage> getChannelMessages(uint8_t channel) const; // Only broadcast messages on a channel
-    std::deque<StoredMessage> getDirectMessages() const;                 // Only direct messages
-
-    // Upgrade boot-relative timestamps once RTC is valid
-    void upgradeBootRelativeTimestamps();
-
-    // Retrieve the C-string text for a stored message
-    static const char *getText(const StoredMessage &msg);
-
-    // Allocate text into pool (used by sender-side code)
-    static uint16_t storeText(const char *src, size_t len);
-
-    // Used when loading from flash to rebuild the text pool
-    static uint16_t rebuildTextFromFlash(const char *src, size_t len);
-
-  private:
-    std::deque<StoredMessage> liveMessages; // Single in-RAM message buffer (also used for persistence)
-    std::string filename;                   // Flash filename for persistence
-};
-
-// Global instance (defined in MessageStore.cpp)
-extern MessageStore messageStore;
-
-#endif

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint16_t numOnline = 0;
-    uint16_t numTotal = 0;
+    uint8_t numOnline = 0;
+    uint8_t numTotal = 0;
 
-    uint16_t lastNumTotal = 0;
+    uint8_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint16_t getNumOnline() const { return numOnline; }
+    uint8_t getNumOnline() const { return numOnline; }
 
-    uint16_t getNumTotal() const { return numTotal; }
+    uint8_t getNumTotal() const { return numTotal; }
 
-    uint16_t getLastNumTotal() const { return lastNumTotal; }
+    uint8_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -11,7 +11,6 @@
  * For more information, see: https://meshtastic.org/
  */
 #include "power.h"
-#include "MessageStore.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "Throttle.h"
@@ -195,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-void battery_adcEnable()
+static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -215,7 +214,7 @@ void battery_adcEnable()
 #endif
 }
 
-static void battery_adcDisable()
+static void adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -279,11 +278,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
-#if defined(BATTERY_CHARGING_INV)
-        // bit of trickery to show 99% up until the charge finishes
-        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
-            battery_SOC = 99;
-#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -326,7 +320,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            battery_adcEnable();
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -338,7 +332,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            battery_adcDisable();
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -461,8 +455,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-#elif defined(MUZI_BASE)
-        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -478,8 +470,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-#elif defined(BATTERY_CHARGING_INV)
-        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -708,18 +698,11 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
+            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
-#ifdef BATTERY_CHARGING_INV
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
+
     enabled = found;
     low_voltage_counter = 0;
 
@@ -776,8 +759,6 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -787,9 +768,7 @@ void Power::shutdown()
     playShutdownMelody();
 #endif
     nodeDB->saveToDisk();
-#if HAS_SCREEN
-    messageStore.saveToFlash();
-#endif
+
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
@@ -927,8 +906,13 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
+#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1456,7 +1440,7 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->isVbusIn(); }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
@@ -1568,4 +1552,4 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif
+#endif

src/PowerFSM.cpp

@@ -57,21 +57,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_POWERFSM("State: SDS");
+    LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
 static void lowBattSDSEnter()
 {
-    LOG_POWERFSM("State: Lower batt SDS");
+    LOG_DEBUG("State: Lower batt SDS");
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
 }
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_POWERFSM("State: SHUTDOWN");
+    LOG_DEBUG("State: SHUTDOWN");
     shutdownAtMsec = millis();
 }
 
@@ -81,7 +81,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_POWERFSM("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
@@ -155,12 +155,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_POWERFSM("State: lsExit");
+    LOG_INFO("Exit state: LS");
 }
 
 static void nbEnter()
 {
-    LOG_POWERFSM("State: nbEnter");
+    LOG_DEBUG("State: NB");
     if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
@@ -173,7 +173,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    LOG_POWERFSM("State: darkEnter");
     setBluetoothEnable(true);
     if (screen)
         screen->setOn(false);
@@ -181,7 +180,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_POWERFSM("State: serialEnter");
+    LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
     if (screen) {
         screen->setOn(true);
@@ -190,14 +189,13 @@ static void serialEnter()
 
 static void serialExit()
 {
-    LOG_POWERFSM("State: serialExit");
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
 }
 
 static void powerEnter()
 {
-    LOG_POWERFSM("State: powerEnter");
+    // LOG_DEBUG("State: POWER");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         LOG_INFO("Loss of power in Powered");
@@ -212,7 +210,6 @@ static void powerEnter()
 
 static void powerIdle()
 {
-    // LOG_POWERFSM("State: powerIdle"); // very chatty
     if (!isPowered()) {
         // If we got here, we are in the wrong state
         LOG_INFO("Loss of power in Powered");
@@ -222,13 +219,14 @@ static void powerIdle()
 
 static void powerExit()
 {
-    LOG_POWERFSM("State: powerExit");
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    LOG_POWERFSM("State: onEnter");
+    LOG_DEBUG("State: ON");
     if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
@@ -236,7 +234,6 @@ static void onEnter()
 
 static void onIdle()
 {
-    LOG_POWERFSM("State: onIdle");
     if (isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
@@ -245,7 +242,7 @@ static void onIdle()
 
 static void bootEnter()
 {
-    LOG_POWERFSM("State: bootEnter");
+    LOG_DEBUG("State: BOOT");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -322,6 +319,11 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
         powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -370,7 +372,7 @@ void PowerFSM_setup()
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
 
-#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

src/PowerFSM.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-#ifdef PowerFSMDebug
-#define LOG_POWERFSM(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_POWERFSM(...)
-#endif
-
 // See sw-design.md for documentation
 
 #define EVENT_PRESS 1

src/RedirectablePrint.cpp

@@ -131,7 +131,6 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         int hour = hms / SEC_PER_HOUR;
         int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
         int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
-
 #ifdef ARCH_PORTDUINO
         ::printf("%s ", logLevel);
         if (color) {

src/buzz/buzz.cpp

@@ -16,7 +16,6 @@ struct ToneDuration {
 };
 
 // Some common frequencies.
-#define NOTE_SILENT 1
 #define NOTE_C3 131
 #define NOTE_CS3 139
 #define NOTE_D3 147
@@ -30,16 +29,11 @@ struct ToneDuration {
 #define NOTE_AS3 233
 #define NOTE_B3 247
 #define NOTE_CS4 277
-#define NOTE_B4 494
-#define NOTE_F5 698
-#define NOTE_G6 1568
-#define NOTE_E7 2637
 
-const int DURATION_1_16 = 62;  // 1/16 note
 const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
 const int DURATION_1_2 = 500;  // 1/2 note
-const int DURATION_3_4 = 750;  // 3/4 note
+const int DURATION_3_4 = 750;  // 1/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
 void playTones(const ToneDuration *tone_durations, int size)
@@ -77,24 +71,13 @@ void playLongBeep()
 
 void playGPSEnableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {
-        {NOTE_F5, DURATION_1_2}, {NOTE_G6, DURATION_1_8}, {NOTE_E7, DURATION_1_4}, {NOTE_SILENT, DURATION_1_2}};
-#else
     ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
 void playGPSDisableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {{NOTE_B4, DURATION_1_16}, {NOTE_B4, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_F3, DURATION_1_16}, {NOTE_F3, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_C3, DURATION_1_1},  {NOTE_SILENT, DURATION_1_1}};
-#else
     ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_C3, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 

src/configuration.h

@@ -36,29 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Offer chance for variant-specific defines */
 #include "variant.h"
 
-// -----------------------------------------------------------------------------
-// Display feature overrides
-// -----------------------------------------------------------------------------
-
-// Allow build environments to opt-in explicitly to the E-Ink UI stack while
-// keeping headless targets slim by default. Existing variants that already
-// define USE_EINK continue to work without additional flags.
-#ifndef MESHTASTIC_USE_EINK_UI
-#ifdef USE_EINK
-#define MESHTASTIC_USE_EINK_UI 1
-#else
-#define MESHTASTIC_USE_EINK_UI 0
-#endif
-#endif
-
-#if MESHTASTIC_USE_EINK_UI
-#ifndef USE_EINK
-#define USE_EINK
-#endif
-#else
-#undef USE_EINK
-#endif
-
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -251,7 +228,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
-#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -273,9 +249,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A // same address as CST226SE
+#define CST328_ADDR 0x1A
 #define CHSC6X_ADDR 0x2E
-#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -394,9 +369,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BLUETOOTH
 #define HAS_BLUETOOTH 0
 #endif
-#ifndef USE_TFTDISPLAY
-#define USE_TFTDISPLAY 0
-#endif
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
@@ -423,13 +395,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
-#ifndef LED_STATE_OFF
-#define LED_STATE_OFF 0
-#endif
-#ifndef LED_STATE_ON
-#define LED_STATE_ON 1
-#endif
-
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -85,8 +85,7 @@ class ScanI2C
         DRV2605,
         BH1750,
         DA217,
-        CHSC6X,
-        CST226SE
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -106,7 +106,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -378,13 +377,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
-                if (registerValue == 0x5449) {
-                    type = OPT3001;
-                    logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c ||
+                    registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                    type = OPT3001;
+                    logFoundDevice("OPT3001", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -465,23 +465,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TCA9555_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
-                if (registerValue == 0x13) {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-                    if (registerValue == 0x81) {
-                        type = DA217;
-                        logFoundDevice("DA217", (uint8_t)addr.address);
-                    } else {
-                        type = TCA9555;
-                        logFoundDevice("TCA9555", (uint8_t)addr.address);
-                    }
-                } else {
-                    type = TCA9555;
-                    logFoundDevice("TCA9555", (uint8_t)addr.address);
-                }
-                break;
             case TSL25911_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
@@ -499,18 +484,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-            case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
-                if (registerValue == 0xA9) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else {
-                    type = CST328;
-                    logFoundDevice("CST328", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
             case LTR553ALS_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
@@ -539,12 +513,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                // Do we have the MLX90614 or the MPR121KB or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
-                if (registerValue == 0xAB) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
+                if (registerValue == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -562,11 +532,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-#ifdef HAS_ICM20948
-                type = ICM20948;
-                logFoundDevice("ICM20948", (uint8_t)addr.address);
-                break;
-#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -38,16 +38,14 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#ifndef GPS_SERIAL_PORT
-#define GPS_SERIAL_PORT Serial1
-#endif
-
-#if defined(ARCH_NRF52)
-Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(GPS_SERIAL_PORT)
 HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#else
+HardwareSerial *GPS::_serial_gps = &Serial1;
+#endif
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -242,9 +240,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(debugmsg.c_str());
-#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -252,6 +247,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
+#ifdef GPS_DEBUG
+                    LOG_DEBUG(debugmsg.c_str());
+#endif
                 }
             }
         }
@@ -1277,24 +1275,6 @@ GnssModel_t GPS::probe(int serialSpeed)
         memset(&ublox_info, 0, sizeof(ublox_info));
         delay(100);
 
-#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
-        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-        delay(10);
-        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
-
-        // attempt to detect the chip based on boot messages
-        std::vector<ChipInfo> passive_detect = {
-            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
-            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
-            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
-            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
-        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
-        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
-            return detectedDriver;
-        }
-#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1493,12 +1473,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
-#ifdef GPS_DEBUG
-                        LOG_DEBUG(response);
-#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1506,9 +1486,6 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1527,7 +1504,10 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-
+#if HAS_GPS && !defined(ARCH_ESP32)
+    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
+    _tx_gpio = 1;
+#endif
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1592,6 +1572,8 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
+    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1601,28 +1583,16 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
-        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
-
 //  ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
+        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
+        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
-        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_NRF52)
-        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_STM32WL)
-        _serial_gps->setTx(new_gps->tx_gpio);
-        _serial_gps->setRx(new_gps->rx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_PORTDUINO)
-        // Portduino can't set the GPS pins directly.
-        _serial_gps->begin(GPS_BAUDRATE);
 #else
-#error Unsupported architecture!
+        _serial_gps->begin(GPS_BAUDRATE);
 #endif
     }
     return new_gps;

src/gps/GPS.h

@@ -194,8 +194,6 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
-#elif defined(ARCH_NRF52)
-    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,11 +112,7 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
-#ifdef MUZI_BASE
-        ArtronShop_RX8130CE rtc(&Wire1);
-#else
         ArtronShop_RX8130CE rtc(&Wire);
-#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -249,11 +245,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
-#ifdef MUZI_BASE
-            ArtronShop_RX8130CE rtc(&Wire1);
-#else
             ArtronShop_RX8130CE rtc(&Wire);
-#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
@@ -318,7 +310,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -327,7 +319,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
+            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/graphics/Screen.cpp

@@ -46,7 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #include "FSCommon.h"
 #include "MeshService.h"
-#include "MessageStore.h"
 #include "RadioLibInterface.h"
 #include "error.h"
 #include "gps/GeoCoord.h"
@@ -65,13 +64,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "modules/WaypointModule.h"
 #include "sleep.h"
 #include "target_specific.h"
-extern MessageStore messageStore;
 
-#if USE_TFTDISPLAY
+using graphics::Emote;
+using graphics::emotes;
+using graphics::numEmotes;
+
 extern uint16_t TFT_MESH;
-#else
-uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
-#endif
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiAPClient.h"
@@ -117,6 +115,10 @@ uint32_t dopThresholds[5] = {2000, 1000, 500, 200, 100};
 // we'll need to hold onto pointers for the modules that can draw a frame.
 std::vector<MeshModule *> moduleFrames;
 
+// Global variables for screen function overlay symbols
+std::vector<std::string> functionSymbol;
+std::string functionSymbolString;
+
 #if HAS_GPS
 // GeoCoord object for the screen
 GeoCoord geoCoord;
@@ -224,9 +226,24 @@ void Screen::showTextInput(const char *header, const char *initialText, uint32_t
 {
     LOG_INFO("showTextInput called with header='%s', durationMs=%d", header ? header : "NULL", durationMs);
 
-    // Start OnScreenKeyboardModule session (non-touch variant)
-    OnScreenKeyboardModule::instance().start(header, initialText, durationMs, textCallback);
+    if (NotificationRenderer::virtualKeyboard) {
+        delete NotificationRenderer::virtualKeyboard;
+        NotificationRenderer::virtualKeyboard = nullptr;
+    }
+
+    NotificationRenderer::textInputCallback = nullptr;
+
+    NotificationRenderer::virtualKeyboard = new VirtualKeyboard();
+    if (header) {
+        NotificationRenderer::virtualKeyboard->setHeader(header);
+    }
+    if (initialText) {
+        NotificationRenderer::virtualKeyboard->setInputText(initialText);
+    }
+
+    // Set up callback with safer cleanup mechanism
     NotificationRenderer::textInputCallback = textCallback;
+    NotificationRenderer::virtualKeyboard->setCallback([textCallback](const std::string &text) { textCallback(text); });
 
     // Store the message and set the expiration timestamp (use same pattern as other notifications)
     strncpy(NotificationRenderer::alertBannerMessage, header ? header : "Text Input", 255);
@@ -257,11 +274,19 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
     } else {
         // otherwise, just display the module frame that's aligned with the current frame
         module_frame = state->currentFrame;
+        // LOG_DEBUG("Screen is not in transition.  Frame: %d", module_frame);
     }
+    // LOG_DEBUG("Draw Module Frame %d", module_frame);
     MeshModule &pi = *moduleFrames.at(module_frame);
     pi.drawFrame(display, state, x, y);
 }
 
+// Ignore messages originating from phone (from the current node 0x0) unless range test or store and forward module are enabled
+static bool shouldDrawMessage(const meshtastic_MeshPacket *packet)
+{
+    return packet->from != 0 && !moduleConfig.store_forward.enabled;
+}
+
 /**
  * Given a recent lat/lon return a guess of the heading the user is walking on.
  *
@@ -299,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
+#if defined(ESP_PLATFORM) && defined(USE_ST7789)
 SPIClass SPI1(HSPI);
 #endif
 
@@ -308,16 +333,16 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 {
     graphics::normalFrames = new FrameCallback[MAX_NUM_NODES + NUM_EXTRA_FRAMES];
 
+    LOG_INFO("Protobuf Value uiconfig.screen_rgb_color: %d", uiconfig.screen_rgb_color);
     int32_t rawRGB = uiconfig.screen_rgb_color;
-
-    // Only validate the combined value once
     if (rawRGB > 0 && rawRGB <= 255255255) {
-        // Extract each component as a normal int first
-        int r = (rawRGB >> 16) & 0xFF;
-        int g = (rawRGB >> 8) & 0xFF;
-        int b = rawRGB & 0xFF;
-        if (r >= 0 && r <= 255 && g >= 0 && g <= 255 && b >= 0 && b <= 255) {
-            TFT_MESH = COLOR565(static_cast<uint8_t>(r), static_cast<uint8_t>(g), static_cast<uint8_t>(b));
+        uint8_t TFT_MESH_r = (rawRGB >> 16) & 0xFF;
+        uint8_t TFT_MESH_g = (rawRGB >> 8) & 0xFF;
+        uint8_t TFT_MESH_b = rawRGB & 0xFF;
+        LOG_INFO("Values of r,g,b: %d, %d, %d", TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
+
+        if (TFT_MESH_r <= 255 && TFT_MESH_g <= 255 && TFT_MESH_b <= 255) {
+            TFT_MESH = COLOR565(TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
         }
     }
 
@@ -331,13 +356,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
-#elif defined(USE_ST7796)
-#ifdef ESP_PLATFORM
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
-                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
-#else
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-#endif
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -350,7 +369,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -380,12 +399,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     isAUTOOled = true;
 #endif
 
-#if defined(USE_ST7789)
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
-#elif defined(USE_ST7796)
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
-
     ui = new OLEDDisplayUi(dispdev);
     cmdQueue.setReader(this);
 }
@@ -422,14 +435,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
-#if defined(MUZI_BASE)
-            dispdev->init();
-            dispdev->setBrightness(brightness);
-            dispdev->flipScreenVertically();
-            dispdev->resetDisplay();
-            digitalWrite(SCREEN_12V_ENABLE, HIGH);
-            delay(100);
-#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -461,15 +466,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
-#endif
-#ifdef USE_ST7796
-            ui->init();
-#ifdef ESP_PLATFORM
-            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
-#else
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
-#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -488,10 +484,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
-
-#ifdef SCREEN_12V_ENABLE
-            digitalWrite(SCREEN_12V_ENABLE, LOW);
-#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -508,21 +500,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
-#ifdef USE_ST7796
-            SPI1.end();
-#if defined(ARCH_ESP32)
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, LOW);
-            pinMode(ST7796_RESET, ANALOG);
-            pinMode(ST7796_RS, ANALOG);
-            pinMode(ST7796_NSS, ANALOG);
-#else
-            nrf_gpio_cfg_default(VTFT_LEDA);
-            nrf_gpio_cfg_default(ST7796_RESET);
-            nrf_gpio_cfg_default(ST7796_RS);
-            nrf_gpio_cfg_default(ST7796_NSS);
-#endif
-#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -536,10 +513,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 void Screen::setup()
 {
 
-    // Enable display rendering
+    // === Enable display rendering ===
     useDisplay = true;
 
-    // Load saved brightness from UI config
+    // === Load saved brightness from UI config ===
     // For OLED displays (SSD1306), default brightness is 255 if not set
     if (uiconfig.screen_brightness == 0) {
 #if defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
@@ -551,13 +528,13 @@ void Screen::setup()
         brightness = uiconfig.screen_brightness;
     }
 
-    // Detect OLED subtype (if supported by board variant)
+    // === Detect OLED subtype (if supported by board variant) ===
 #ifdef AutoOLEDWire_h
     if (isAUTOOled)
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
+#ifdef USE_SH1107_128_64
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -565,15 +542,8 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
-#if defined(MUZI_BASE)
-    dispdev->delayPoweron = true;
-#endif
-#if defined(USE_ST7796) && defined(TFT_MESH)
-    // Custom text color, if defined in variant.h
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
 
-    // Initialize display and UI system
+    // === Initialize display and UI system ===
     ui->init();
     displayWidth = dispdev->width();
     displayHeight = dispdev->height();
@@ -585,7 +555,7 @@ void Screen::setup()
     ui->disableAllIndicators();            // Disable page indicator dots
     ui->getUiState()->userData = this;     // Allow static callbacks to access Screen instance
 
-    // Apply loaded brightness
+    // === Apply loaded brightness ===
 #if defined(ST7789_CS)
     static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
 #elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SPISSD1306)
@@ -593,20 +563,20 @@ void Screen::setup()
 #endif
     LOG_INFO("Applied screen brightness: %d", brightness);
 
-    // Set custom overlay callbacks
+    // === Set custom overlay callbacks ===
     static OverlayCallback overlays[] = {
         graphics::UIRenderer::drawNavigationBar // Custom indicator icons for each frame
     };
     ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
-    // Enable UTF-8 to display mapping
+    // === Enable UTF-8 to display mapping ===
     dispdev->setFontTableLookupFunction(customFontTableLookup);
 
 #ifdef USERPREFS_OEM_TEXT
     logo_timeout *= 2; // Give more time for branded boot logos
 #endif
 
-    // Configure alert frames (e.g., "Resuming..." or region name)
+    // === Configure alert frames (e.g., "Resuming..." or region name) ===
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip slow refresh
     alertFrames[0] = [this](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) {
 #ifdef ARCH_ESP32
@@ -622,28 +592,26 @@ void Screen::setup()
     ui->setFrames(alertFrames, 1);
     ui->disableAutoTransition(); // Require manual navigation between frames
 
-    // Log buffer for on-screen logs (3 lines max)
+    // === Log buffer for on-screen logs (3 lines max) ===
     dispdev->setLogBuffer(3, 32);
 
-    // Optional screen mirroring or flipping (e.g. for T-Beam orientation)
+    // === Optional screen mirroring or flipping (e.g. for T-Beam orientation) ===
 #ifdef SCREEN_MIRROR
     dispdev->mirrorScreen();
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif defined(USE_ST7796)
-        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
     }
 #endif
 
-    // Generate device ID from MAC address
+    // === Generate device ID from MAC address ===
     uint8_t dmac[6];
     getMacAddr(dmac);
     snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
@@ -652,7 +620,7 @@ void Screen::setup()
     handleSetOn(false); // Ensure proper init for Arduino targets
 #endif
 
-    //  Turn on display and trigger first draw
+    // === Turn on display and trigger first draw ===
     handleSetOn(true);
     determineResolution(dispdev->height(), dispdev->width());
     ui->update();
@@ -669,13 +637,13 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
 #endif
 
-    // Subscribe to device status updates
+    // === Subscribe to device status updates ===
     powerStatusObserver.observe(&powerStatus->onNewStatus);
     gpsStatusObserver.observe(&gpsStatus->onNewStatus);
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
@@ -683,14 +651,12 @@ void Screen::setup()
 #if !MESHTASTIC_EXCLUDE_ADMIN
     adminMessageObserver.observe(adminModule);
 #endif
+    if (textMessageModule)
+        textMessageObserver.observe(textMessageModule);
     if (inputBroker)
         inputObserver.observe(inputBroker);
 
-    // Load persisted messages into RAM
-    messageStore.loadFromFlash();
-    LOG_INFO("MessageStore loaded from flash");
-
-    // Notify modules that support UI events
+    // === Notify modules that support UI events ===
     MeshModule::observeUIEvents(&uiFrameEventObserver);
 }
 
@@ -761,23 +727,6 @@ int32_t Screen::runOnce()
     if (displayHeight == 0) {
         displayHeight = dispdev->getHeight();
     }
-
-    // Detect frame transitions and clear message cache when leaving text message screen
-    {
-        static int8_t lastFrameIndex = -1;
-        int8_t currentFrameIndex = ui->getUiState()->currentFrame;
-        int8_t textMsgIndex = framesetInfo.positions.textMessage;
-
-        if (lastFrameIndex != -1 && currentFrameIndex != lastFrameIndex) {
-
-            if (lastFrameIndex == textMsgIndex && currentFrameIndex != textMsgIndex) {
-                graphics::MessageRenderer::clearMessageCache();
-            }
-        }
-
-        lastFrameIndex = currentFrameIndex;
-    }
-
     menuHandler::handleMenuSwitch(dispdev);
 
     // Show boot screen for first logo_timeout seconds, then switch to normal operation.
@@ -833,17 +782,17 @@ int32_t Screen::runOnce()
             break;
         case Cmd::ON_PRESS:
             if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
-                showFrame(FrameDirection::NEXT);
+                handleOnPress();
             }
             break;
         case Cmd::SHOW_PREV_FRAME:
             if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
-                showFrame(FrameDirection::PREVIOUS);
+                handleShowPrevFrame();
             }
             break;
         case Cmd::SHOW_NEXT_FRAME:
             if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
-                showFrame(FrameDirection::NEXT);
+                handleShowNextFrame();
             }
             break;
         case Cmd::START_ALERT_FRAME: {
@@ -864,7 +813,6 @@ int32_t Screen::runOnce()
             break;
         case Cmd::STOP_ALERT_FRAME:
             NotificationRenderer::pauseBanner = false;
-            break;
         case Cmd::STOP_BOOT_SCREEN:
             EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); // E-Ink: Explicitly use full-refresh for next frame
             if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
@@ -1035,6 +983,9 @@ void Screen::setFrames(FrameFocus focus)
     }
 #endif
 
+    // Declare this early so it’s available in FOCUS_PRESERVE block
+    bool willInsertTextMessage = shouldDrawMessage(&devicestate.rx_text_message);
+
     if (!hiddenFrames.home) {
         fsi.positions.home = numframes;
         normalFrames[numframes++] = graphics::UIRenderer::drawDeviceFocused;
@@ -1046,16 +997,11 @@ void Screen::setFrames(FrameFocus focus)
     indicatorIcons.push_back(icon_mail);
 
 #ifndef USE_EINK
-    if (!hiddenFrames.nodelist_nodes) {
-        fsi.positions.nodelist_nodes = numframes;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicListScreen_Nodes;
+    if (!hiddenFrames.nodelist) {
+        fsi.positions.nodelist = numframes;
+        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicNodeListScreen;
         indicatorIcons.push_back(icon_nodes);
     }
-    if (!hiddenFrames.nodelist_location) {
-        fsi.positions.nodelist_location = numframes;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicListScreen_Location;
-        indicatorIcons.push_back(icon_list);
-    }
 #endif
 
 // Show detailed node views only on E-Ink builds
@@ -1077,13 +1023,11 @@ void Screen::setFrames(FrameFocus focus)
     }
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (!hiddenFrames.nodelist_bearings) {
         fsi.positions.nodelist_bearings = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
         indicatorIcons.push_back(icon_list);
     }
-#endif
     if (!hiddenFrames.gps) {
         fsi.positions.gps = numframes;
         normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
@@ -1183,7 +1127,7 @@ void Screen::setFrames(FrameFocus focus)
     }
 
     fsi.frameCount = numframes;   // Total framecount is used to apply FOCUS_PRESERVE
-    this->frameCount = numframes; // Save frame count for use in custom overlay
+    this->frameCount = numframes; // ✅ Save frame count for use in custom overlay
     LOG_DEBUG("Finished build frames. numframes: %d", numframes);
 
     ui->setFrames(normalFrames, numframes);
@@ -1203,6 +1147,10 @@ void Screen::setFrames(FrameFocus focus)
     case FOCUS_FAULT:
         ui->switchToFrame(fsi.positions.fault);
         break;
+    case FOCUS_TEXTMESSAGE:
+        hasUnreadMessage = false; // ✅ Clear when message is *viewed*
+        ui->switchToFrame(fsi.positions.textMessage);
+        break;
     case FOCUS_MODULE:
         // Whichever frame was marked by MeshModule::requestFocus(), if any
         // If no module requested focus, will show the first frame instead
@@ -1245,11 +1193,8 @@ void Screen::setFrameImmediateDraw(FrameCallback *drawFrames)
 void Screen::toggleFrameVisibility(const std::string &frameName)
 {
 #ifndef USE_EINK
-    if (frameName == "nodelist_nodes") {
-        hiddenFrames.nodelist_nodes = !hiddenFrames.nodelist_nodes;
-    }
-    if (frameName == "nodelist_location") {
-        hiddenFrames.nodelist_location = !hiddenFrames.nodelist_location;
+    if (frameName == "nodelist") {
+        hiddenFrames.nodelist = !hiddenFrames.nodelist;
     }
 #endif
 #ifdef USE_EINK
@@ -1264,11 +1209,9 @@ void Screen::toggleFrameVisibility(const std::string &frameName)
     }
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (frameName == "nodelist_bearings") {
         hiddenFrames.nodelist_bearings = !hiddenFrames.nodelist_bearings;
     }
-#endif
     if (frameName == "gps") {
         hiddenFrames.gps = !hiddenFrames.gps;
     }
@@ -1290,10 +1233,8 @@ void Screen::toggleFrameVisibility(const std::string &frameName)
 bool Screen::isFrameHidden(const std::string &frameName) const
 {
 #ifndef USE_EINK
-    if (frameName == "nodelist_nodes")
-        return hiddenFrames.nodelist_nodes;
-    if (frameName == "nodelist_location")
-        return hiddenFrames.nodelist_location;
+    if (frameName == "nodelist")
+        return hiddenFrames.nodelist;
 #endif
 #ifdef USE_EINK
     if (frameName == "nodelist_lastheard")
@@ -1304,10 +1245,8 @@ bool Screen::isFrameHidden(const std::string &frameName) const
         return hiddenFrames.nodelist_distance;
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
     if (frameName == "nodelist_bearings")
         return hiddenFrames.nodelist_bearings;
-#endif
     if (frameName == "gps")
         return hiddenFrames.gps;
 #endif
@@ -1323,6 +1262,37 @@ bool Screen::isFrameHidden(const std::string &frameName) const
     return false;
 }
 
+// Dismisses the currently displayed screen frame, if possible
+// Relevant for text message, waypoint, others in future?
+// Triggered with a CardKB keycombo
+void Screen::hideCurrentFrame()
+{
+    uint8_t currentFrame = ui->getUiState()->currentFrame;
+    bool dismissed = false;
+    if (currentFrame == framesetInfo.positions.textMessage && devicestate.has_rx_text_message) {
+        LOG_INFO("Hide Text Message");
+        devicestate.has_rx_text_message = false;
+        memset(&devicestate.rx_text_message, 0, sizeof(devicestate.rx_text_message));
+    } else if (currentFrame == framesetInfo.positions.waypoint && devicestate.has_rx_waypoint) {
+        LOG_DEBUG("Hide Waypoint");
+        devicestate.has_rx_waypoint = false;
+        hiddenFrames.waypoint = true;
+        dismissed = true;
+    } else if (currentFrame == framesetInfo.positions.wifi) {
+        LOG_DEBUG("Hide WiFi Screen");
+        hiddenFrames.wifi = true;
+        dismissed = true;
+    } else if (currentFrame == framesetInfo.positions.lora) {
+        LOG_INFO("Hide LoRa");
+        hiddenFrames.lora = true;
+        dismissed = true;
+    }
+
+    if (dismissed) {
+        setFrames(FOCUS_DEFAULT); // You could also use FOCUS_PRESERVE
+    }
+}
+
 void Screen::handleStartFirmwareUpdateScreen()
 {
     LOG_DEBUG("Show firmware screen");
@@ -1375,6 +1345,28 @@ void Screen::decreaseBrightness()
     /* TO DO: add little popup in center of screen saying what brightness level it is set to*/
 }
 
+void Screen::setFunctionSymbol(std::string sym)
+{
+    if (std::find(functionSymbol.begin(), functionSymbol.end(), sym) == functionSymbol.end()) {
+        functionSymbol.push_back(sym);
+        functionSymbolString = "";
+        for (auto symbol : functionSymbol) {
+            functionSymbolString = symbol + " " + functionSymbolString;
+        }
+        setFastFramerate();
+    }
+}
+
+void Screen::removeFunctionSymbol(std::string sym)
+{
+    functionSymbol.erase(std::remove(functionSymbol.begin(), functionSymbol.end(), sym), functionSymbol.end());
+    functionSymbolString = "";
+    for (auto symbol : functionSymbol) {
+        functionSymbolString = symbol + " " + functionSymbolString;
+    }
+    setFastFramerate();
+}
+
 void Screen::handleOnPress()
 {
     // If screen was off, just wake it, otherwise advance to next frame
@@ -1386,17 +1378,23 @@ void Screen::handleOnPress()
     }
 }
 
-void Screen::showFrame(FrameDirection direction)
+void Screen::handleShowPrevFrame()
 {
-    // Only advance frames when UI is stable
+    // If screen was off, just wake it, otherwise go back to previous frame
+    // If we are in a transition, the press must have bounced, drop it.
     if (ui->getUiState()->frameState == FIXED) {
+        ui->previousFrame();
+        lastScreenTransition = millis();
+        setFastFramerate();
+    }
+}
 
-        if (direction == FrameDirection::NEXT) {
-            ui->nextFrame();
-        } else {
-            ui->previousFrame();
-        }
-
+void Screen::handleShowNextFrame()
+{
+    // If screen was off, just wake it, otherwise advance to next frame
+    // If we are in a transition, the press must have bounced, drop it.
+    if (ui->getUiState()->frameState == FIXED) {
+        ui->nextFrame();
         lastScreenTransition = millis();
         setFastFramerate();
     }
@@ -1422,6 +1420,7 @@ void Screen::setFastFramerate()
 
 int Screen::handleStatusUpdate(const meshtastic::Status *arg)
 {
+    // LOG_DEBUG("Screen got status update %d", arg->getStatusType());
     switch (arg->getStatusType()) {
     case STATUS_TYPE_NODE:
         if (showingNormalScreen && nodeStatus->getLastNumTotal() != nodeStatus->getNumTotal()) {
@@ -1453,14 +1452,14 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             // Incoming message
             devicestate.has_rx_text_message = true; // Needed to include the message frame
             hasUnreadMessage = true;                // Enables mail icon in the header
-            setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view (no-op during text_input)
+            setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view
 
             // Only wake/force display if the configuration allows it
             if (shouldWakeOnReceivedMessage()) {
                 setOn(true);    // Wake up the screen first
                 forceDisplay(); // Forces screen redraw
             }
-            // === Prepare banner/popup content ===
+            // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
             const meshtastic_Channel channel =
                 channels.getByIndex(packet->channel ? packet->channel : channels.getPrimaryIndex());
@@ -1484,84 +1483,38 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
 
             // Unlike generic messages, alerts (when enabled via the ext notif module) ignore any
             // 'mute' preferences set to any specific node or channel.
-            // If on-screen keyboard is active, show a transient popup over keyboard instead of interrupting it
-            if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
-                // Wake and force redraw so popup is visible immediately
-                if (shouldWakeOnReceivedMessage()) {
-                    setOn(true);
-                    forceDisplay();
-                }
-
-                // Build popup: title = message source name, content = message text (sanitized)
-                // Title
-                char titleBuf[64] = {0};
+            if (isAlert) {
                 if (longName && longName[0]) {
-                    // Sanitize sender name
-                    std::string t = sanitizeString(longName);
-                    strncpy(titleBuf, t.c_str(), sizeof(titleBuf) - 1);
+                    snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
                 } else {
-                    strncpy(titleBuf, "Message", sizeof(titleBuf) - 1);
+                    strcpy(banner, "Alert Received");
                 }
-
-                // Content: payload bytes may not be null-terminated, remove ASCII_BELL and sanitize
-                char content[256] = {0};
-                {
-                    std::string raw;
-                    raw.reserve(packet->decoded.payload.size);
-                    for (size_t i = 0; i < packet->decoded.payload.size; ++i) {
-                        char c = msgRaw[i];
-                        if (c == ASCII_BELL)
-                            continue; // strip bell
-                        raw.push_back(c);
-                    }
-                    std::string sanitized = sanitizeString(raw);
-                    strncpy(content, sanitized.c_str(), sizeof(content) - 1);
-                }
-
-                NotificationRenderer::showKeyboardMessagePopupWithTitle(titleBuf, content, 3000);
-
-// Maintain existing buzzer behavior on M5 if applicable
+                screen->showSimpleBanner(banner, 3000);
+            } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
+                if (longName && longName[0]) {
 #if defined(M5STACK_UNITC6L)
+                    strcpy(banner, "New Message");
+#else
+                    snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+#endif
+
+                } else {
+                    strcpy(banner, "New Message");
+                }
+#if defined(M5STACK_UNITC6L)
+                screen->setOn(true);
+                screen->showSimpleBanner(banner, 1500);
                 if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
                     (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
                     (!isBroadcast(packet->to) && isToUs(packet))) {
+                    // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
+                    // - packet contains an alert and alert bell buzzer is enabled
+                    // - packet is a non-broadcast that is addressed to this node
                     playLongBeep();
                 }
-#endif
-            } else {
-                // No keyboard active: use regular banner flow, respecting mute settings
-                if (isAlert) {
-                    if (longName && longName[0]) {
-                        snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
-                    } else {
-                        strcpy(banner, "Alert Received");
-                    }
-                    screen->showSimpleBanner(banner, 3000);
-                } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
-                    if (longName && longName[0]) {
-#if defined(M5STACK_UNITC6L)
-                        strcpy(banner, "New Message");
 #else
-                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+                screen->showSimpleBanner(banner, 3000);
 #endif
-                    } else {
-                        strcpy(banner, "New Message");
-                    }
-#if defined(M5STACK_UNITC6L)
-                    screen->setOn(true);
-                    screen->showSimpleBanner(banner, 1500);
-                    if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
-                        (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
-                        (!isBroadcast(packet->to) && isToUs(packet))) {
-                        // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
-                        // - packet contains an alert and alert bell buzzer is enabled
-                        // - packet is a non-broadcast that is addressed to this node
-                        playLongBeep();
-                    }
-#else
-                    screen->showSimpleBanner(banner, 3000);
-#endif
-                }
             }
         }
     }
@@ -1579,26 +1532,16 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
     if (showingNormalScreen) {
         // Regenerate the frameset, potentially honoring a module's internal requestFocus() call
-        if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET) {
+        if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET)
             setFrames(FOCUS_MODULE);
-        }
 
-        // Regenerate the frameset, while attempting to maintain focus on the current frame
-        else if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET_BACKGROUND) {
+        // Regenerate the frameset, while Attempt to maintain focus on the current frame
+        else if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET_BACKGROUND)
             setFrames(FOCUS_PRESERVE);
-        }
 
         // Don't regenerate the frameset, just re-draw whatever is on screen ASAP
-        else if (event->action == UIFrameEvent::Action::REDRAW_ONLY) {
+        else if (event->action == UIFrameEvent::Action::REDRAW_ONLY)
             setFastFramerate();
-        }
-
-        // Jump directly to the Text Message screen
-        else if (event->action == UIFrameEvent::Action::SWITCH_TO_TEXTMESSAGE) {
-            setFrames(FOCUS_PRESERVE); // preserve current frame ordering
-            ui->switchToFrame(framesetInfo.positions.textMessage);
-            setFastFramerate(); // force redraw ASAP
-        }
     }
 
     return 0;
@@ -1606,7 +1549,6 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
 int Screen::handleInputEvent(const InputEvent *event)
 {
-    LOG_INPUT("Screen Input event %u! kb %u", event->inputEvent, event->kbchar);
     if (!screenOn)
         return 0;
 
@@ -1636,48 +1578,7 @@ int Screen::handleInputEvent(const InputEvent *event)
         menuHandler::handleMenuSwitch(dispdev);
         return 0;
     }
-    // UP/DOWN in message screen scrolls through message threads
-    if (ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
 
-        if (event->inputEvent == INPUT_BROKER_UP) {
-            if (messageStore.getMessages().empty()) {
-                cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-            } else {
-                graphics::MessageRenderer::scrollUp();
-                setFastFramerate(); // match existing behavior
-                return 0;
-            }
-        }
-
-        if (event->inputEvent == INPUT_BROKER_DOWN) {
-            if (messageStore.getMessages().empty()) {
-                cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-            } else {
-                graphics::MessageRenderer::scrollDown();
-                setFastFramerate();
-                return 0;
-            }
-        }
-    }
-    // UP/DOWN in node list screens scrolls through node pages
-    if (ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_nodes ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_location ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_lastheard ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||
-        ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings) {
-        if (event->inputEvent == INPUT_BROKER_UP) {
-            graphics::NodeListRenderer::scrollUp();
-            setFastFramerate();
-            return 0;
-        }
-
-        if (event->inputEvent == INPUT_BROKER_DOWN) {
-            graphics::NodeListRenderer::scrollDown();
-            setFastFramerate();
-            return 0;
-        }
-    }
     // Use left or right input from a keyboard to move between frames,
     // so long as a mesh module isn't using these events for some other purpose
     if (showingNormalScreen) {
@@ -1691,39 +1592,10 @@ int Screen::handleInputEvent(const InputEvent *event)
 
         // If no modules are using the input, move between frames
         if (!inputIntercepted) {
-#if defined(INPUTDRIVER_ENCODER_TYPE) && INPUTDRIVER_ENCODER_TYPE == 2
-            bool handledEncoderScroll = false;
-            const bool isTextMessageFrame = (framesetInfo.positions.textMessage != 255 &&
-                                             this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
-                                             !messageStore.getMessages().empty());
-            if (isTextMessageFrame) {
-                if (event->inputEvent == INPUT_BROKER_UP_LONG) {
-                    graphics::MessageRenderer::nudgeScroll(-1);
-                    handledEncoderScroll = true;
-                } else if (event->inputEvent == INPUT_BROKER_DOWN_LONG) {
-                    graphics::MessageRenderer::nudgeScroll(1);
-                    handledEncoderScroll = true;
-                }
-            }
-
-            if (handledEncoderScroll) {
-                setFastFramerate();
-                return 0;
-            }
-#endif
             if (event->inputEvent == INPUT_BROKER_LEFT || event->inputEvent == INPUT_BROKER_ALT_PRESS) {
-                showFrame(FrameDirection::PREVIOUS);
-            } else if (event->inputEvent == INPUT_BROKER_RIGHT || event->inputEvent == INPUT_BROKER_USER_PRESS) {
-                showFrame(FrameDirection::NEXT);
-            } else if (event->inputEvent == INPUT_BROKER_UP_LONG) {
-                // Long press up button for fast frame switching
                 showPrevFrame();
-            } else if (event->inputEvent == INPUT_BROKER_DOWN_LONG) {
-                // Long press down button for fast frame switching
+            } else if (event->inputEvent == INPUT_BROKER_RIGHT || event->inputEvent == INPUT_BROKER_USER_PRESS) {
                 showNextFrame();
-            } else if ((event->inputEvent == INPUT_BROKER_UP || event->inputEvent == INPUT_BROKER_DOWN) &&
-                       this->ui->getUiState()->currentFrame == framesetInfo.positions.home) {
-                cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
             } else if (event->inputEvent == INPUT_BROKER_SELECT) {
                 if (this->ui->getUiState()->currentFrame == framesetInfo.positions.home) {
                     menuHandler::homeBaseMenu();
@@ -1738,7 +1610,7 @@ int Screen::handleInputEvent(const InputEvent *event)
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
                     menuHandler::loraMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
-                    if (!messageStore.getMessages().empty()) {
+                    if (devicestate.rx_text_message.from) {
                         menuHandler::messageResponseMenu();
                     } else {
 #if defined(M5STACK_UNITC6L)
@@ -1751,8 +1623,7 @@ int Screen::handleInputEvent(const InputEvent *event)
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
                     menuHandler::favoriteBaseMenu();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_nodes ||
-                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_location ||
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_lastheard ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||
@@ -1763,7 +1634,7 @@ int Screen::handleInputEvent(const InputEvent *event)
                     menuHandler::wifiBaseMenu();
                 }
             } else if (event->inputEvent == INPUT_BROKER_BACK) {
-                showFrame(FrameDirection::PREVIOUS);
+                showPrevFrame();
             } else if (event->inputEvent == INPUT_BROKER_CANCEL) {
                 setOn(false);
             }

src/graphics/Screen.h

@@ -40,6 +40,7 @@ class Screen
         FOCUS_DEFAULT,  // No specific frame
         FOCUS_PRESERVE, // Return to the previous frame
         FOCUS_FAULT,
+        FOCUS_TEXTMESSAGE,
         FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
         FOCUS_CLOCK,
         FOCUS_SYSTEM,
@@ -54,6 +55,8 @@ class Screen
     void startFirmwareUpdateScreen() {}
     void increaseBrightness() {}
     void decreaseBrightness() {}
+    void setFunctionSymbol(std::string) {}
+    void removeFunctionSymbol(std::string) {}
     void startAlert(const char *) {}
     void showSimpleBanner(const char *message, uint32_t durationMs = 0) {}
     void showOverlayBanner(BannerOverlayOptions) {}
@@ -80,8 +83,6 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
-#elif defined(USE_ST7796)
-#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -169,8 +170,6 @@ class Point
 namespace graphics
 {
 
-enum class FrameDirection { NEXT, PREVIOUS };
-
 // Forward declarations
 class Screen;
 
@@ -210,6 +209,8 @@ class Screen : public concurrency::OSThread
         CallbackObserver<Screen, const meshtastic::Status *>(this, &Screen::handleStatusUpdate);
     CallbackObserver<Screen, const meshtastic::Status *> nodeStatusObserver =
         CallbackObserver<Screen, const meshtastic::Status *>(this, &Screen::handleStatusUpdate);
+    CallbackObserver<Screen, const meshtastic_MeshPacket *> textMessageObserver =
+        CallbackObserver<Screen, const meshtastic_MeshPacket *>(this, &Screen::handleTextMessage);
     CallbackObserver<Screen, const UIFrameEvent *> uiFrameEventObserver =
         CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent); // Sent by Mesh Modules
     CallbackObserver<Screen, const InputEvent *> inputObserver =
@@ -220,10 +221,6 @@ class Screen : public concurrency::OSThread
   public:
     OLEDDisplay *getDisplayDevice() { return dispdev; }
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
-
-    // Screen dimension accessors
-    inline int getHeight() const { return displayHeight; }
-    inline int getWidth() const { return displayWidth; }
     size_t frameCount = 0; // Total number of active frames
     ~Screen();
 
@@ -232,6 +229,7 @@ class Screen : public concurrency::OSThread
         FOCUS_DEFAULT,  // No specific frame
         FOCUS_PRESERVE, // Return to the previous frame
         FOCUS_FAULT,
+        FOCUS_TEXTMESSAGE,
         FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
         FOCUS_CLOCK,
         FOCUS_SYSTEM,
@@ -251,8 +249,6 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
-    bool isScreenOn() { return screenOn; }
-
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];
@@ -279,7 +275,6 @@ class Screen : public concurrency::OSThread
     void onPress() { enqueueCmd(ScreenCmd{.cmd = Cmd::ON_PRESS}); }
     void showPrevFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_PREV_FRAME}); }
     void showNextFrame() { enqueueCmd(ScreenCmd{.cmd = Cmd::SHOW_NEXT_FRAME}); }
-    void showFrame(FrameDirection direction);
 
     // generic alert start
     void startAlert(FrameCallback _alertFrame)
@@ -347,6 +342,9 @@ class Screen : public concurrency::OSThread
     void increaseBrightness();
     void decreaseBrightness();
 
+    void setFunctionSymbol(std::string sym);
+    void removeFunctionSymbol(std::string sym);
+
     /// Stops showing the boot screen.
     void stopBootScreen() { enqueueCmd(ScreenCmd{.cmd = Cmd::STOP_BOOT_SCREEN}); }
 
@@ -577,7 +575,7 @@ class Screen : public concurrency::OSThread
 
     // Handle observer events
     int handleStatusUpdate(const meshtastic::Status *arg);
-    int handleTextMessage(const meshtastic_MeshPacket *packet);
+    int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
     int handleInputEvent(const InputEvent *arg);
     int handleAdminMessage(AdminModule_ObserverData *arg);
@@ -588,6 +586,9 @@ class Screen : public concurrency::OSThread
     /// Draws our SSL cert screen during boot (called from WebServer)
     void setSSLFrames();
 
+    // Dismiss the currently focussed frame, if possible (e.g. text message, waypoint)
+    void hideCurrentFrame();
+
     // Menu-driven Show / Hide Toggle
     void toggleFrameVisibility(const std::string &frameName);
     bool isFrameHidden(const std::string &frameName) const;
@@ -635,6 +636,8 @@ class Screen : public concurrency::OSThread
     // Implementations of various commands, called from doTask().
     void handleSetOn(bool on, FrameCallback einkScreensaver = NULL);
     void handleOnPress();
+    void handleShowNextFrame();
+    void handleShowPrevFrame();
     void handleStartFirmwareUpdateScreen();
 
     // Info collected by setFrames method.
@@ -654,8 +657,7 @@ class Screen : public concurrency::OSThread
             uint8_t gps = 255;
             uint8_t home = 255;
             uint8_t textMessage = 255;
-            uint8_t nodelist_nodes = 255;
-            uint8_t nodelist_location = 255;
+            uint8_t nodelist = 255;
             uint8_t nodelist_lastheard = 255;
             uint8_t nodelist_hopsignal = 255;
             uint8_t nodelist_distance = 255;
@@ -678,8 +680,7 @@ class Screen : public concurrency::OSThread
         bool home = false;
         bool clock = false;
 #ifndef USE_EINK
-        bool nodelist_nodes = false;
-        bool nodelist_location = false;
+        bool nodelist = false;
 #endif
 #ifdef USE_EINK
         bool nodelist_lastheard = false;
@@ -687,9 +688,7 @@ class Screen : public concurrency::OSThread
         bool nodelist_distance = false;
 #endif
 #if HAS_GPS
-#ifdef USE_EINK
         bool nodelist_bearings = false;
-#endif
         bool gps = false;
 #endif
         bool lora = false;

src/graphics/ScreenFonts.h

@@ -73,8 +73,7 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     defined(HACKADAY_COMMUNICATOR) || defined(USE_ST7796)) &&                                                                   \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/SharedUIDisplay.cpp

@@ -17,12 +17,6 @@ namespace graphics
 
 void determineResolution(int16_t screenheight, int16_t screenwidth)
 {
-
-#ifdef FORCE_LOW_RES
-    isHighResolution = false;
-    return;
-#endif
-
     if (screenwidth > 128) {
         isHighResolution = true;
     }
@@ -30,19 +24,11 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
     if (screenwidth > 128 && screenheight <= 64) {
         isHighResolution = false;
     }
-}
 
-void decomposeTime(uint32_t rtc_sec, int &hour, int &minute, int &second)
-{
-    hour = 0;
-    minute = 0;
-    second = 0;
-    if (rtc_sec == 0)
-        return;
-    uint32_t hms = (rtc_sec % SEC_PER_DAY + SEC_PER_DAY) % SEC_PER_DAY;
-    hour = hms / SEC_PER_HOUR;
-    minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
-    second = hms % SEC_PER_MIN;
+    // Special case for Heltec Wireless Tracker v1.1
+    if (screenwidth == 160 && screenheight == 80) {
+        isHighResolution = false;
+    }
 }
 
 // === Shared External State ===
@@ -213,8 +199,8 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     if (rtc_sec > 0) {
         // === Build Time String ===
         long hms = (rtc_sec % SEC_PER_DAY + SEC_PER_DAY) % SEC_PER_DAY;
-        int hour, minute, second;
-        graphics::decomposeTime(rtc_sec, hour, minute, second);
+        int hour = hms / SEC_PER_HOUR;
+        int minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
         snprintf(timeStr, sizeof(timeStr), "%d:%02d", hour, minute);
 
         // === Build Date String ===
@@ -427,12 +413,8 @@ void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
     }
 
     if (drawConnectionState) {
-        const int scale = isHighResolution ? 2 : 1;
-        display->setColor(BLACK);
-        display->fillRect(0, SCREEN_HEIGHT - (1 * scale) - (connection_icon_height * scale), (connection_icon_width * scale),
-                          (connection_icon_height * scale) + (2 * scale));
-        display->setColor(WHITE);
         if (isHighResolution) {
+            const int scale = 2;
             const int bytesPerRow = (connection_icon_width + 7) / 8;
             int iconX = 0;
             int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);

src/graphics/SharedUIDisplay.h

@@ -45,8 +45,6 @@ extern bool isMuted;
 extern bool isHighResolution;
 void determineResolution(int16_t screenheight, int16_t screenwidth);
 
-void decomposeTime(uint32_t rtc_sec, int &hour, int &minute, int &second);
-
 // Rounded highlight (used for inverted headers)
 void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w, int16_t h, int16_t r);
 

src/graphics/TFTDisplay.cpp

@@ -1,6 +1,5 @@
 #include "configuration.h"
 #include "main.h"
-#if USE_TFTDISPLAY
 
 #if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -124,11 +123,6 @@ static void rak14014_tpIntHandle(void)
     _rak14014_touch_int = true;
 }
 
-#elif defined(HACKADAY_COMMUNICATOR)
-#include <Arduino_GFX_Library.h>
-Arduino_DataBus *bus = nullptr;
-Arduino_GFX *tft = nullptr;
-
 #elif defined(ST72xx_DE)
 #include <LovyanGFX.hpp>
 #include <TCA9534.h>
@@ -489,6 +483,8 @@ class LGFX : public lgfx::LGFX_Device
     lgfx::Touch_FT5x06 _touch_instance;
 #elif defined(HELTEC_V4_TFT)
     lgfx::TOUCH_CHSC6X _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -1139,6 +1135,9 @@ static LGFX *tft = nullptr;
 
 #endif
 
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1274,15 +1273,12 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-#if defined(HACKADAY_COMMUNICATOR)
-            tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
-                                      (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);
-#else
+
             // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
             // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
             tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
                           &linePixelBuffer[x_FirstPixelUpdate]);
-#endif
+
             somethingChanged = true;
         }
         y++;
@@ -1346,8 +1342,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         display(true);
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOn();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1360,8 +1354,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) &&                                                                                \
-    !defined(HACKADAY_COMMUNICATOR) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
+#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -1373,8 +1366,6 @@ void TFTDisplay::sendCommand(uint8_t com)
         tft->clear();
         if (portduino_config.displayBacklight.pin > 0)
             digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
-#elif defined(HACKADAY_COMMUNICATOR)
-        tft->displayOff();
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1387,7 +1378,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(false); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
         tft->setBrightness(0);
 #endif
         break;
@@ -1403,7 +1394,7 @@ void TFTDisplay::setDisplayBrightness(uint8_t _brightness)
 {
 #ifdef RAK14014
     // todo
-#elif !defined(HACKADAY_COMMUNICATOR)
+#else
     tft->setBrightness(_brightness);
     LOG_DEBUG("Brightness is set to value: %i ", _brightness);
 #endif
@@ -1421,7 +1412,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -1440,7 +1431,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK) && !defined(HACKADAY_COMMUNICATOR)
+#elif !defined(M5STACK)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -1459,12 +1450,6 @@ bool TFTDisplay::connect()
     LOG_INFO("Do TFT init");
 #ifdef RAK14014
     tft = new TFT_eSPI;
-#elif defined(HACKADAY_COMMUNICATOR)
-    bus = new Arduino_ESP32SPI(TFT_DC, TFT_CS, 38 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
-    tft = new Arduino_NV3007(bus, 40, 0 /* rotation */, false /* IPS */, 142 /* width */, 428 /* height */, 12 /* col offset 1 */,
-                             0 /* row offset 1 */, 14 /* col offset 2 */, 0 /* row offset 2 */, nv3007_279_init_operations,
-                             sizeof(nv3007_279_init_operations));
-
 #else
     tft = new LGFX;
 #endif
@@ -1475,15 +1460,8 @@ bool TFTDisplay::connect()
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
 #endif
-#ifdef HACKADAY_COMMUNICATOR
-    bool beginStatus = tft->begin();
-    if (beginStatus)
-        LOG_DEBUG("TFT Success!");
-    else
-        LOG_ERROR("TFT Fail!");
-#else
+
     tft->init();
-#endif
 
 #if defined(M5STACK)
     tft->setRotation(0);
@@ -1516,4 +1494,4 @@ bool TFTDisplay::connect()
     return true;
 }
 
-#endif // USE_TFTDISPLAY
+#endif

src/graphics/TimeFormatters.cpp

@@ -101,23 +101,3 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
-
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
-{
-    uint32_t days = uptimeMillis / 86400000;
-    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
-    uint32_t mins = (uptimeMillis % 3600000) / 60000;
-    uint32_t secs = (uptimeMillis % 60000) / 1000;
-
-    if (days) {
-        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
-    } else if (hours) {
-        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
-    } else if (!includeSecs) {
-        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
-    } else if (mins) {
-        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
-    } else {
-        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
-    }
-}

src/graphics/TimeFormatters.h

@@ -24,10 +24,3 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
-
-/**
- * Get a compact human-readable string that only shows the largest non-zero time components.
- * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
- * will display as "1d 2h".
- */
-void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);