Upgrade trunk

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.trunk/trunk.yaml

@@ -8,18 +8,18 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.497
+    - checkov@3.2.499
-    - renovate@42.84.2
+    - renovate@42.93.1
-    - prettier@3.8.0
+    - prettier@3.8.1
     - trufflehog@3.92.5
     - yamllint@1.38.0
     - bandit@1.9.3
     - trivy@0.68.2
     - taplo@0.10.0
-    - ruff@0.14.13
+    - ruff@0.14.14
     - isort@7.0.0
     - markdownlint@0.47.0
-    - oxipng@10.0.0
+    - oxipng@10.1.0
     - svgo@4.0.0
     - actionlint@1.7.10
     - flake8@7.3.0

boards/mini-epaper-s3.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo Mini-Epapaer-S3 (4 MB Flash, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://www.lilygo.cc",
-  "vendor": "LilyGo"
-}

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
+	https://github.com/meshtastic/device-ui/archive/69739b84f87a91568d3c421498bc89977937a141.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -212,3 +212,30 @@ lib_deps =
 	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0
+; Same as environmental_extra but without BSEC (saves ~3.5KB DRAM for original ESP32 targets)
+[environmental_extra_no_bsec]
+lib_deps =
+	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
+	adafruit/Adafruit BMP3XX Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
+	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.2
+	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
+	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
+	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	closedcube/ClosedCube OPT3001@1.1.2
+	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
+	sensirion/Sensirion Core@0.7.2
+	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
+	sensirion/Sensirion I2C SCD4x@1.1.0

src/Power.cpp

@@ -723,6 +723,16 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;

src/gps/RTC.cpp

@@ -397,7 +397,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
     return (currentQuality >= minQuality) ? getTime(local) : 0;
 }
 
-time_t gm_mktime(struct tm *tm)
+time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
     time_t result = 0;
@@ -413,7 +413,7 @@ time_t gm_mktime(struct tm *tm)
     days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
 
     // Now, within this tm->year, compute the days *before* this tm->month starts.
-    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    static const int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
     int days_this_year_before_this_month = days_before_month[tm->tm_mon];                             // tm->tm_mon is 0..11
 
     // If this is a leap year, and we're past February, add a day:
@@ -435,6 +435,7 @@ time_t gm_mktime(struct tm *tm)
 
     return result;
 #else
-    return mktime(tm);
+    struct tm tmCopy = *tm;
+    return mktime(&tmCopy);
 #endif
 }

src/gps/RTC.h

@@ -54,7 +54,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 RTCSetResult readFromRTC();
 
-time_t gm_mktime(struct tm *tm);
+time_t gm_mktime(const struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600

src/graphics/EInkDisplay2.cpp

@@ -259,18 +259,6 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(3);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(MINI_EPAPER_S3)
-    spi1 = new SPIClass(HSPI);
-    spi1->begin(PIN_SPI1_SCK, PIN_SPI1_MISO, PIN_SPI1_MOSI, PIN_EINK_CS);
-
-    // Create GxEPD2 objects
-    auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-    adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-
-    // Init GxEPD2
-    adafruitDisplay->init();
-    adafruitDisplay->setRotation(0);
-    adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 
     // Detect display model, before starting SPI

src/graphics/EInkDisplay2.h

@@ -93,8 +93,7 @@ class EInkDisplay : public OLEDDisplay
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK) ||                      \
+#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
-    defined(MINI_EPAPER_S3)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/draw/MenuHandler.cpp

@@ -266,52 +266,8 @@ void menuHandler::FrequencySlotPicker()
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.bandwidth;
+    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
-    if (loraConfig.use_preset) {
+                                      : bwCodeToKHz(loraConfig.bandwidth);
-        switch (loraConfig.modem_preset) {
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        default:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        }
-    } else {
-        bw = loraConfig.bandwidth;
-        if (bw == 31) // This parameter is not an integer
-            bw = 31.25;
-        if (bw == 62) // Fix for 62.5Khz bandwidth
-            bw = 62.5;
-        if (bw == 200)
-            bw = 203.125;
-        if (bw == 400)
-            bw = 406.25;
-        if (bw == 800)
-            bw = 812.5;
-        if (bw == 1600)
-            bw = 1625.0;
-    }
 
     uint32_t numChannels = 0;
     if (myRegion) {

src/graphics/draw/MenuHandler.h

@@ -140,7 +140,7 @@ struct ScreenColor {
     uint8_t b;
     bool useVariant;
 
-    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
+    explicit ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
         : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
     {
     }

src/mesh/MeshRadio.h

@@ -23,3 +23,98 @@ extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
 extern void initRegion();
+
+static inline float bwCodeToKHz(uint16_t bwCode)
+{
+    if (bwCode == 31)
+        return 31.25f;
+    if (bwCode == 62)
+        return 62.5f;
+    if (bwCode == 200)
+        return 203.125f;
+    if (bwCode == 400)
+        return 406.25f;
+    if (bwCode == 800)
+        return 812.5f;
+    if (bwCode == 1600)
+        return 1625.0f;
+    return (float)bwCode;
+}
+
+static inline uint16_t bwKHzToCode(float bwKHz)
+{
+    if (bwKHz > 31.24f && bwKHz < 31.26f)
+        return 31;
+    if (bwKHz > 62.49f && bwKHz < 62.51f)
+        return 62;
+    if (bwKHz > 203.12f && bwKHz < 203.13f)
+        return 200;
+    if (bwKHz > 406.24f && bwKHz < 406.26f)
+        return 400;
+    if (bwKHz > 812.49f && bwKHz < 812.51f)
+        return 800;
+    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
+        return 1600;
+    return (uint16_t)(bwKHz + 0.5f);
+}
+
+static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
+                                       uint8_t &cr)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 8;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 9;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 10;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 12;
+        break;
+    default: // LONG_FAST (or illegal)
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 11;
+        break;
+    }
+}
+
+static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
+{
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
+    return bwKHz;
+}

src/mesh/NodeDB.cpp

@@ -13,6 +13,7 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
+#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -1297,6 +1298,13 @@ void NodeDB::loadFromDisk()
             LOG_INFO("Loaded saved config version %d", config.version);
         }
     }
+
+    // Coerce LoRa config fields derived from presets while bootstrapping.
+    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
+    if (config.has_lora && config.lora.use_preset) {
+        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
+    }
+
     if (backupSecurity.private_key.size > 0) {
         LOG_DEBUG("Restoring backup of security config");
         config.security = backupSecurity;

src/mesh/RadioInterface.cpp

@@ -220,6 +220,34 @@ void initRegion()
     myRegion = r;
 }
 
+void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
+{
+    if (!loraConfig.use_preset) {
+        return;
+    }
+
+    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
+    const RegionInfo *r = regions;
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
+        ;
+
+    const bool regionWideLora = r->wideLora;
+
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+
+    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
+    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
+        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+    }
+
+    loraConfig.bandwidth = bwKHzToCode(bwKHz);
+    loraConfig.spread_factor = sf;
+}
+
 /**
  * ## LoRaWAN for North America
 
@@ -474,54 +502,7 @@ void RadioInterface::applyModemConfig()
     bool validConfig = false; // We need to check for a valid configuration
     while (!validConfig) {
         if (loraConfig.use_preset) {
-
+            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
-            switch (loraConfig.modem_preset) {
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 8;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 9;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 10;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 8;
-                sf = 11;
-                break;
-            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 12;
-                break;
-            }
             if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                 cr = loraConfig.coding_rate;
                 LOG_INFO("Using custom Coding Rate %u", cr);
@@ -529,20 +510,7 @@ void RadioInterface::applyModemConfig()
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            bw = loraConfig.bandwidth;
+            bw = bwCodeToKHz(loraConfig.bandwidth);
-
-            if (bw == 31) // This parameter is not an integer
-                bw = 31.25;
-            if (bw == 62) // Fix for 62.5Khz bandwidth
-                bw = 62.5;
-            if (bw == 200)
-                bw = 203.125;
-            if (bw == 400)
-                bw = 406.25;
-            if (bw == 800)
-                bw = 812.5;
-            if (bw == 1600)
-                bw = 1625.0;
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {

src/mesh/RadioInterface.h

@@ -7,6 +7,9 @@
 #include "airtime.h"
 #include "error.h"
 
+// Forward decl to avoid a direct include of generated config headers / full LoRaConfig definition in this widely-included file.
+typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
+
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission
 
 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -115,6 +118,12 @@ class RadioInterface
 
     virtual ~RadioInterface() {}
 
+    /**
+     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
+     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
+     */
+    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
+
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
      *

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -27,6 +27,15 @@ PB_BIND(meshtastic_SharedContact, meshtastic_SharedContact, AUTO)
 PB_BIND(meshtastic_KeyVerificationAdmin, meshtastic_KeyVerificationAdmin, AUTO)
 
 
+PB_BIND(meshtastic_SensorConfig, meshtastic_SensorConfig, AUTO)
+
+
+PB_BIND(meshtastic_SCD4X_config, meshtastic_SCD4X_config, AUTO)
+
+
+PB_BIND(meshtastic_SEN5X_config, meshtastic_SEN5X_config, AUTO)
+
+
 
 
 

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,7 +77,9 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
+    /* TODO: REPLACE */
+    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -169,6 +171,48 @@ typedef struct _meshtastic_KeyVerificationAdmin {
     uint32_t security_number;
 } meshtastic_KeyVerificationAdmin;
 
+typedef struct _meshtastic_SCD4X_config {
+    /* Set Automatic self-calibration enabled */
+    bool has_set_asc;
+    bool set_asc;
+    /* Recalibration target CO2 concentration in ppm (FRC or ASC) */
+    bool has_set_target_co2_conc;
+    uint32_t set_target_co2_conc;
+    /* Reference temperature in degC */
+    bool has_set_temperature;
+    float set_temperature;
+    /* Altitude of sensor in meters above sea level. 0 - 3000m (overrides ambient pressure) */
+    bool has_set_altitude;
+    uint32_t set_altitude;
+    /* Sensor ambient pressure in Pa. 70000 - 120000 Pa (overrides altitude) */
+    bool has_set_ambient_pressure;
+    uint32_t set_ambient_pressure;
+    /* Perform a factory reset of the sensor */
+    bool has_factory_reset;
+    bool factory_reset;
+    /* Power mode for sensor (true for low power, false for normal) */
+    bool has_set_power_mode;
+    bool set_power_mode;
+} meshtastic_SCD4X_config;
+
+typedef struct _meshtastic_SEN5X_config {
+    /* Reference temperature in degC */
+    bool has_set_temperature;
+    float set_temperature;
+    /* One-shot mode (true for low power - one-shot mode, false for normal - continuous mode) */
+    bool has_set_one_shot_mode;
+    bool set_one_shot_mode;
+} meshtastic_SEN5X_config;
+
+typedef struct _meshtastic_SensorConfig {
+    /* SCD4X CO2 Sensor configuration */
+    bool has_scd4x_config;
+    meshtastic_SCD4X_config scd4x_config;
+    /* SEN5X PM Sensor configuration */
+    bool has_sen5x_config;
+    meshtastic_SEN5X_config sen5x_config;
+} meshtastic_SensorConfig;
+
 typedef PB_BYTES_ARRAY_T(8) meshtastic_AdminMessage_session_passkey_t;
 /* This message is handled by the Admin module and is responsible for all settings/channel read/write operations.
  This message is used to do settings operations to both remote AND local nodes.
@@ -301,6 +345,8 @@ typedef struct _meshtastic_AdminMessage {
         bool nodedb_reset;
         /* Tell the node to reset into the OTA Loader */
         meshtastic_AdminMessage_OTAEvent ota_request;
+        /* Parameters and sensor configuration */
+        meshtastic_SensorConfig sensor_config;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -323,8 +369,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD
@@ -349,6 +395,9 @@ extern "C" {
 #define meshtastic_KeyVerificationAdmin_message_type_ENUMTYPE meshtastic_KeyVerificationAdmin_MessageType
 
 
+
+
+
 /* Initializer values for message structs */
 #define meshtastic_AdminMessage_init_default     {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0}
@@ -357,6 +406,9 @@ extern "C" {
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}}
 #define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default, 0, 0}
 #define meshtastic_KeyVerificationAdmin_init_default {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
+#define meshtastic_SensorConfig_init_default     {false, meshtastic_SCD4X_config_init_default, false, meshtastic_SEN5X_config_init_default}
+#define meshtastic_SCD4X_config_init_default     {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
+#define meshtastic_SEN5X_config_init_default     {false, 0, false, 0}
 #define meshtastic_AdminMessage_init_zero        {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0}
 #define meshtastic_AdminMessage_OTAEvent_init_zero {_meshtastic_OTAMode_MIN, {0, {0}}}
@@ -364,6 +416,9 @@ extern "C" {
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}}
 #define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero, 0, 0}
 #define meshtastic_KeyVerificationAdmin_init_zero {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
+#define meshtastic_SensorConfig_init_zero        {false, meshtastic_SCD4X_config_init_zero, false, meshtastic_SEN5X_config_init_zero}
+#define meshtastic_SCD4X_config_init_zero        {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
+#define meshtastic_SEN5X_config_init_zero        {false, 0, false, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_AdminMessage_InputEvent_event_code_tag 1
@@ -385,6 +440,17 @@ extern "C" {
 #define meshtastic_KeyVerificationAdmin_remote_nodenum_tag 2
 #define meshtastic_KeyVerificationAdmin_nonce_tag 3
 #define meshtastic_KeyVerificationAdmin_security_number_tag 4
+#define meshtastic_SCD4X_config_set_asc_tag      1
+#define meshtastic_SCD4X_config_set_target_co2_conc_tag 2
+#define meshtastic_SCD4X_config_set_temperature_tag 3
+#define meshtastic_SCD4X_config_set_altitude_tag 4
+#define meshtastic_SCD4X_config_set_ambient_pressure_tag 5
+#define meshtastic_SCD4X_config_factory_reset_tag 6
+#define meshtastic_SCD4X_config_set_power_mode_tag 7
+#define meshtastic_SEN5X_config_set_temperature_tag 1
+#define meshtastic_SEN5X_config_set_one_shot_mode_tag 2
+#define meshtastic_SensorConfig_scd4x_config_tag 1
+#define meshtastic_SensorConfig_sen5x_config_tag 2
 #define meshtastic_AdminMessage_get_channel_request_tag 1
 #define meshtastic_AdminMessage_get_channel_response_tag 2
 #define meshtastic_AdminMessage_get_owner_request_tag 3
@@ -441,6 +507,7 @@ extern "C" {
 #define meshtastic_AdminMessage_factory_reset_config_tag 99
 #define meshtastic_AdminMessage_nodedb_reset_tag 100
 #define meshtastic_AdminMessage_ota_request_tag  102
+#define meshtastic_AdminMessage_sensor_config_tag 103
 #define meshtastic_AdminMessage_session_passkey_tag 101
 
 /* Struct field encoding specification for nanopb */
@@ -501,7 +568,8 @@ X(a, STATIC,   ONEOF,    INT32,    (payload_variant,shutdown_seconds,shutdown_se
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory_reset_config),  99) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
 X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 102)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 102) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,sensor_config,sensor_config), 103)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL
 #define meshtastic_AdminMessage_payload_variant_get_channel_response_MSGTYPE meshtastic_Channel
@@ -523,6 +591,7 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 10
 #define meshtastic_AdminMessage_payload_variant_add_contact_MSGTYPE meshtastic_SharedContact
 #define meshtastic_AdminMessage_payload_variant_key_verification_MSGTYPE meshtastic_KeyVerificationAdmin
 #define meshtastic_AdminMessage_payload_variant_ota_request_MSGTYPE meshtastic_AdminMessage_OTAEvent
+#define meshtastic_AdminMessage_payload_variant_sensor_config_MSGTYPE meshtastic_SensorConfig
 
 #define meshtastic_AdminMessage_InputEvent_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   event_code,        1) \
@@ -569,6 +638,31 @@ X(a, STATIC,   OPTIONAL, UINT32,   security_number,   4)
 #define meshtastic_KeyVerificationAdmin_CALLBACK NULL
 #define meshtastic_KeyVerificationAdmin_DEFAULT NULL
 
+#define meshtastic_SensorConfig_FIELDLIST(X, a) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  scd4x_config,      1) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  sen5x_config,      2)
+#define meshtastic_SensorConfig_CALLBACK NULL
+#define meshtastic_SensorConfig_DEFAULT NULL
+#define meshtastic_SensorConfig_scd4x_config_MSGTYPE meshtastic_SCD4X_config
+#define meshtastic_SensorConfig_sen5x_config_MSGTYPE meshtastic_SEN5X_config
+
+#define meshtastic_SCD4X_config_FIELDLIST(X, a) \
+X(a, STATIC,   OPTIONAL, BOOL,     set_asc,           1) \
+X(a, STATIC,   OPTIONAL, UINT32,   set_target_co2_conc,   2) \
+X(a, STATIC,   OPTIONAL, FLOAT,    set_temperature,   3) \
+X(a, STATIC,   OPTIONAL, UINT32,   set_altitude,      4) \
+X(a, STATIC,   OPTIONAL, UINT32,   set_ambient_pressure,   5) \
+X(a, STATIC,   OPTIONAL, BOOL,     factory_reset,     6) \
+X(a, STATIC,   OPTIONAL, BOOL,     set_power_mode,    7)
+#define meshtastic_SCD4X_config_CALLBACK NULL
+#define meshtastic_SCD4X_config_DEFAULT NULL
+
+#define meshtastic_SEN5X_config_FIELDLIST(X, a) \
+X(a, STATIC,   OPTIONAL, FLOAT,    set_temperature,   1) \
+X(a, STATIC,   OPTIONAL, BOOL,     set_one_shot_mode,   2)
+#define meshtastic_SEN5X_config_CALLBACK NULL
+#define meshtastic_SEN5X_config_DEFAULT NULL
+
 extern const pb_msgdesc_t meshtastic_AdminMessage_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_InputEvent_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_OTAEvent_msg;
@@ -576,6 +670,9 @@ extern const pb_msgdesc_t meshtastic_HamParameters_msg;
 extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 extern const pb_msgdesc_t meshtastic_SharedContact_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
+extern const pb_msgdesc_t meshtastic_SensorConfig_msg;
+extern const pb_msgdesc_t meshtastic_SCD4X_config_msg;
+extern const pb_msgdesc_t meshtastic_SEN5X_config_msg;
 
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
 #define meshtastic_AdminMessage_fields &meshtastic_AdminMessage_msg
@@ -585,6 +682,9 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 #define meshtastic_SharedContact_fields &meshtastic_SharedContact_msg
 #define meshtastic_KeyVerificationAdmin_fields &meshtastic_KeyVerificationAdmin_msg
+#define meshtastic_SensorConfig_fields &meshtastic_SensorConfig_msg
+#define meshtastic_SCD4X_config_fields &meshtastic_SCD4X_config_msg
+#define meshtastic_SEN5X_config_fields &meshtastic_SEN5X_config_msg
 
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_ADMIN_PB_H_MAX_SIZE meshtastic_AdminMessage_size
@@ -594,6 +694,9 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 #define meshtastic_HamParameters_size            31
 #define meshtastic_KeyVerificationAdmin_size     25
 #define meshtastic_NodeRemoteHardwarePinsResponse_size 496
+#define meshtastic_SCD4X_config_size             29
+#define meshtastic_SEN5X_config_size             7
+#define meshtastic_SensorConfig_size             40
 #define meshtastic_SharedContact_size            127
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -361,7 +361,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2279
+#define meshtastic_BackupPreferences_size        2362
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
+    /* StatusMessage Config */
+    bool has_statusmessage;
+    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -96,9 +99,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -124,6 +127,7 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
+#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -161,7 +165,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -177,6 +182,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
+#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -186,9 +192,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        675
+#define meshtastic_LocalModuleConfig_size        758
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/telemetry.pb.cpp

@@ -33,6 +33,9 @@ PB_BIND(meshtastic_Telemetry, meshtastic_Telemetry, 2)
 PB_BIND(meshtastic_Nau7802Config, meshtastic_Nau7802Config, AUTO)
 
 
+PB_BIND(meshtastic_SEN5XState, meshtastic_SEN5XState, AUTO)
+
+
 
 
 

src/mesh/generated/meshtastic/telemetry.pb.h

@@ -361,6 +361,8 @@ typedef struct _meshtastic_LocalStats {
     uint32_t heap_free_bytes;
     /* Number of packets that were dropped because the transmit queue was full. */
     uint16_t num_tx_dropped;
+    /* Noise floor value measured in dBm */
+    int32_t noise_floor;
 } meshtastic_LocalStats;
 
 /* Health telemetry metrics */
@@ -433,6 +435,25 @@ typedef struct _meshtastic_Nau7802Config {
     float calibrationFactor;
 } meshtastic_Nau7802Config;
 
+/* SEN5X State, for saving to flash */
+typedef struct _meshtastic_SEN5XState {
+    /* Last cleaning time for SEN5X */
+    uint32_t last_cleaning_time;
+    /* Last cleaning time for SEN5X - valid flag */
+    bool last_cleaning_valid;
+    /* Config flag for one-shot mode (see admin.proto) */
+    bool one_shot_mode;
+    /* Last VOC state time for SEN55 */
+    bool has_voc_state_time;
+    uint32_t voc_state_time;
+    /* Last VOC state validity flag for SEN55 */
+    bool has_voc_state_valid;
+    bool voc_state_valid;
+    /* VOC state array (8x uint8t) for SEN55 */
+    bool has_voc_state_array;
+    uint64_t voc_state_array;
+} meshtastic_SEN5XState;
+
 
 #ifdef __cplusplus
 extern "C" {
@@ -453,25 +474,28 @@ extern "C" {
 
 
 
+
 /* Initializer values for message structs */
 #define meshtastic_DeviceMetrics_init_default    {false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_EnvironmentMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_PowerMetrics_init_default     {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_AirQualityMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
-#define meshtastic_LocalStats_init_default       {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+#define meshtastic_LocalStats_init_default       {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_HealthMetrics_init_default    {false, 0, false, 0, false, 0}
 #define meshtastic_HostMetrics_init_default      {0, 0, 0, false, 0, false, 0, 0, 0, 0, false, ""}
 #define meshtastic_Telemetry_init_default        {0, 0, {meshtastic_DeviceMetrics_init_default}}
 #define meshtastic_Nau7802Config_init_default    {0, 0}
+#define meshtastic_SEN5XState_init_default       {0, 0, 0, false, 0, false, 0, false, 0}
 #define meshtastic_DeviceMetrics_init_zero       {false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_EnvironmentMetrics_init_zero  {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_PowerMetrics_init_zero        {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
 #define meshtastic_AirQualityMetrics_init_zero   {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0}
-#define meshtastic_LocalStats_init_zero          {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+#define meshtastic_LocalStats_init_zero          {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_HealthMetrics_init_zero       {false, 0, false, 0, false, 0}
 #define meshtastic_HostMetrics_init_zero         {0, 0, 0, false, 0, false, 0, 0, 0, 0, false, ""}
 #define meshtastic_Telemetry_init_zero           {0, 0, {meshtastic_DeviceMetrics_init_zero}}
 #define meshtastic_Nau7802Config_init_zero       {0, 0}
+#define meshtastic_SEN5XState_init_zero          {0, 0, 0, false, 0, false, 0, false, 0}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_DeviceMetrics_battery_level_tag 1
@@ -556,6 +580,7 @@ extern "C" {
 #define meshtastic_LocalStats_heap_total_bytes_tag 12
 #define meshtastic_LocalStats_heap_free_bytes_tag 13
 #define meshtastic_LocalStats_num_tx_dropped_tag 14
+#define meshtastic_LocalStats_noise_floor_tag    15
 #define meshtastic_HealthMetrics_heart_bpm_tag   1
 #define meshtastic_HealthMetrics_spO2_tag        2
 #define meshtastic_HealthMetrics_temperature_tag 3
@@ -578,6 +603,12 @@ extern "C" {
 #define meshtastic_Telemetry_host_metrics_tag    8
 #define meshtastic_Nau7802Config_zeroOffset_tag  1
 #define meshtastic_Nau7802Config_calibrationFactor_tag 2
+#define meshtastic_SEN5XState_last_cleaning_time_tag 1
+#define meshtastic_SEN5XState_last_cleaning_valid_tag 2
+#define meshtastic_SEN5XState_one_shot_mode_tag  3
+#define meshtastic_SEN5XState_voc_state_time_tag 4
+#define meshtastic_SEN5XState_voc_state_valid_tag 5
+#define meshtastic_SEN5XState_voc_state_array_tag 6
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_DeviceMetrics_FIELDLIST(X, a) \
@@ -678,7 +709,8 @@ X(a, STATIC,   SINGULAR, UINT32,   num_tx_relay,     10) \
 X(a, STATIC,   SINGULAR, UINT32,   num_tx_relay_canceled,  11) \
 X(a, STATIC,   SINGULAR, UINT32,   heap_total_bytes,  12) \
 X(a, STATIC,   SINGULAR, UINT32,   heap_free_bytes,  13) \
-X(a, STATIC,   SINGULAR, UINT32,   num_tx_dropped,   14)
+X(a, STATIC,   SINGULAR, UINT32,   num_tx_dropped,   14) \
+X(a, STATIC,   SINGULAR, INT32,    noise_floor,      15)
 #define meshtastic_LocalStats_CALLBACK NULL
 #define meshtastic_LocalStats_DEFAULT NULL
 
@@ -727,6 +759,16 @@ X(a, STATIC,   SINGULAR, FLOAT,    calibrationFactor,   2)
 #define meshtastic_Nau7802Config_CALLBACK NULL
 #define meshtastic_Nau7802Config_DEFAULT NULL
 
+#define meshtastic_SEN5XState_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UINT32,   last_cleaning_time,   1) \
+X(a, STATIC,   SINGULAR, BOOL,     last_cleaning_valid,   2) \
+X(a, STATIC,   SINGULAR, BOOL,     one_shot_mode,     3) \
+X(a, STATIC,   OPTIONAL, UINT32,   voc_state_time,    4) \
+X(a, STATIC,   OPTIONAL, BOOL,     voc_state_valid,   5) \
+X(a, STATIC,   OPTIONAL, FIXED64,  voc_state_array,   6)
+#define meshtastic_SEN5XState_CALLBACK NULL
+#define meshtastic_SEN5XState_DEFAULT NULL
+
 extern const pb_msgdesc_t meshtastic_DeviceMetrics_msg;
 extern const pb_msgdesc_t meshtastic_EnvironmentMetrics_msg;
 extern const pb_msgdesc_t meshtastic_PowerMetrics_msg;
@@ -736,6 +778,7 @@ extern const pb_msgdesc_t meshtastic_HealthMetrics_msg;
 extern const pb_msgdesc_t meshtastic_HostMetrics_msg;
 extern const pb_msgdesc_t meshtastic_Telemetry_msg;
 extern const pb_msgdesc_t meshtastic_Nau7802Config_msg;
+extern const pb_msgdesc_t meshtastic_SEN5XState_msg;
 
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
 #define meshtastic_DeviceMetrics_fields &meshtastic_DeviceMetrics_msg
@@ -747,6 +790,7 @@ extern const pb_msgdesc_t meshtastic_Nau7802Config_msg;
 #define meshtastic_HostMetrics_fields &meshtastic_HostMetrics_msg
 #define meshtastic_Telemetry_fields &meshtastic_Telemetry_msg
 #define meshtastic_Nau7802Config_fields &meshtastic_Nau7802Config_msg
+#define meshtastic_SEN5XState_fields &meshtastic_SEN5XState_msg
 
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_MAX_SIZE meshtastic_Telemetry_size
@@ -755,9 +799,10 @@ extern const pb_msgdesc_t meshtastic_Nau7802Config_msg;
 #define meshtastic_EnvironmentMetrics_size       113
 #define meshtastic_HealthMetrics_size            11
 #define meshtastic_HostMetrics_size              264
-#define meshtastic_LocalStats_size               76
+#define meshtastic_LocalStats_size               87
 #define meshtastic_Nau7802Config_size            16
 #define meshtastic_PowerMetrics_size             81
+#define meshtastic_SEN5XState_size               27
 #define meshtastic_Telemetry_size                272
 
 #ifdef __cplusplus

src/modules/NodeInfoModule.cpp

@@ -2,6 +2,7 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -129,14 +130,17 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
-    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
+
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
+    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
-        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
+    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
+        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
+        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
         LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true; // Mark it as ignored for MeshModule
+        ignoreRequest = true;
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore

test/test_radio/test_main.cpp

@@ -0,0 +1,100 @@
+#include "MeshRadio.h"
+#include "RadioInterface.h"
+#include "TestUtil.h"
+#include <unity.h>
+
+#include "meshtastic/config.pb.h"
+
+static void test_bwCodeToKHz_specialMappings()
+{
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 31.25f, bwCodeToKHz(31));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 62.5f, bwCodeToKHz(62));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 203.125f, bwCodeToKHz(200));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 406.25f, bwCodeToKHz(400));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 812.5f, bwCodeToKHz(800));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 1625.0f, bwCodeToKHz(1600));
+}
+
+static void test_bwCodeToKHz_passthrough()
+{
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 125.0f, bwCodeToKHz(125));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 250.0f, bwCodeToKHz(250));
+}
+
+static void test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = false;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+    cfg.bandwidth = 123;
+    cfg.spread_factor = 8;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(123, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(8, cfg.spread_factor);
+    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(800, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, cfg.modem_preset);
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(11, cfg.spread_factor);
+}
+
+void setUp(void) {}
+void tearDown(void) {}
+
+void setup()
+{
+    delay(10);
+    delay(2000);
+
+    initializeTestEnvironment();
+
+    UNITY_BEGIN();
+    RUN_TEST(test_bwCodeToKHz_specialMappings);
+    RUN_TEST(test_bwCodeToKHz_passthrough);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan);
+    exit(UNITY_END());
+}
+
+void loop() {}

variants/esp32/chatter2/platformio.ini

@@ -6,6 +6,8 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/esp32-common.ini

@@ -59,13 +59,13 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
 

variants/esp32/esp32.ini

@@ -7,3 +7,22 @@ custom_esp32_kind = esp32
 build_flags =
   ${esp32_common.build_flags}
   -DMESHTASTIC_EXCLUDE_AUDIO=1
+; Override lib_deps to use environmental_extra_no_bsec instead of environmental_extra
+; BSEC library uses ~3.5KB DRAM which causes overflow on original ESP32 targets
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra_no_bsec.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

variants/esp32/m5stack_core/platformio.ini

@@ -16,6 +16,8 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,9 +19,9 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/tbeam/platformio.ini

@@ -32,4 +32,4 @@ lib_deps =
   # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
   https://github.com/meshtastic/st7796/archive/1.0.5.zip
   # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4

variants/esp32c6/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.3
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -1,8 +1,17 @@
 [env:heltec-wireless-tracker-v2]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = heltec_wireless_tracker_v2.svg
+custom_meshtastic_tags = Heltec
+
 extends = esp32s3_base
 board = heltec_wireless_tracker_v2
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
+custom_meshtastic_hw_model = 113
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V2
+custom_meshtastic_architecture = esp32s3
+custom_meshtastic_display_name = Heltec Wireless Tracker V2
+custom_meshtastic_actively_supported = true
 
 build_flags = 
   ${esp32s3_base.build_flags}

variants/esp32s3/mini-epaper-s3/pins_arduino.h

@@ -1,26 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <stdint.h>
-
-#define USB_VID 0x303a
-#define USB_PID 0x1001
-
-// The default Wire will be mapped to PMU and RTC
-static const uint8_t SDA = 18;
-static const uint8_t SCL = 9;
-
-// Default SPI will be mapped to Radio
-static const uint8_t SS = -1;
-static const uint8_t MOSI = 17;
-static const uint8_t MISO = 6;
-static const uint8_t SCK = 8;
-
-#define SPI_MOSI (39)
-#define SPI_SCK (41)
-#define SPI_MISO (38)
-#define SPI_CS (40)
-
-#define SDCARD_CS SPI_CS
-
-#endif /* Pins_Arduino_h */

variants/esp32s3/mini-epaper-s3/platformio.ini

@@ -1,41 +0,0 @@
-[env:mini-epaper-s3]
-;custom_meshtastic_hw_model =
-custom_meshtastic_hw_model_slug = MINI_EPAPER_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO Mini ePaper S3 E-Ink
-custom_meshtastic_images = mini-epaper-s3.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = no
-
-extends = esp32s3_base
-board = mini-epaper-s3
-board_check = true
-upload_protocol = esptool
-
-build_flags = 
-  ${esp32s3_base.build_flags}
-  -I variants/esp32s3/mini-epaper-s3
-  -DMINI_EPAPER_S3
-  -DPRIVATE_HW ; TODO
-  -DUSE_EINK
-  -DEINK_DISPLAY_MODEL=GxEPD2_102
-  -DEINK_WIDTH=80
-  -DEINK_HEIGHT=128
-;  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
-;  -DEINK_LIMIT_FASTREFRESH=0           ; How many consecutive fast-refreshes are permitted    //20
-;  -DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates          //30
-;  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
-;  -DEINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
-;  -DEINK_LIMIT_GHOSTING_PX=1500        ; (Optional) How much image ghosting is tolerated
-;  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-
-lib_deps =
-  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
-  ;# renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
-  ;https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
-  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3

variants/esp32s3/mini-epaper-s3/variant.h

@@ -1,56 +0,0 @@
-// Display (E-Ink)
-
-#define PIN_EINK_CS 13
-#define PIN_EINK_BUSY 10
-#define PIN_EINK_RES 11
-#define PIN_EINK_SCLK 14
-#define PIN_EINK_MOSI 15
-#define PIN_EINK_DC 12
-#define PIN_EINK_EN 42
-
-#define SPI_INTERFACES_COUNT 2
-#define PIN_SPI1_MISO -1
-#define PIN_SPI1_MOSI PIN_EINK_MOSI
-#define PIN_SPI1_SCK PIN_EINK_SCLK
-
-#define I2C_SDA SDA
-#define I2C_SCL SCL
-
-#define BATTERY_PIN 2 // A battery voltage measurement pin, voltage divider connected here to
-// measure battery voltage ratio of voltage divider = 2.0 (assumption)
-#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
-
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-
-#define BUTTON_PIN 3
-#define BUTTON_NEED_PULLUP
-#define ALT_BUTTON_PIN 4
-#define ALT_BUTTON_ACTIVE_LOW true
-#define ALT_BUTTON_ACTIVE_PULLUP true
-#define PIN_BUTTON3 0
-
-// #define HAS_SDCARD 1
-// #define SDCARD_USE_SOFT_SPI
-
-// PCF85063 RTC Module
-#define PCF85063_RTC 0x51
-#define HAS_RTC 1
-
-#define USE_SX1262
-#define LORA_DIO1 5
-#define LORA_SCK 8
-#define LORA_MISO 6
-#define LORA_MOSI 17
-#define LORA_CS 7 // CS not connected; IO7 is free
-#define LORA_RESET 21
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 5
-#define SX126X_BUSY 16
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif

variants/esp32s3/t-deck-pro/platformio.ini

@@ -29,7 +29,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-watch-s3/platformio.ini

@@ -24,7 +24,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
   adafruit/Adafruit DRV2605 Library@1.2.4
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 
 build_flags = 
   ${esp32s3_base.build_flags} 

variants/esp32s3/tlora-pager/platformio.ini

@@ -39,7 +39,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
   # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
   https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
   # TODO renovate

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -25,4 +25,4 @@ lib_deps =
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp

@@ -49,3 +49,21 @@ void initVariant()
     pinMode(Battery_LED_4, OUTPUT);
     ledOff(Battery_LED_4);
 }
+
+/// called from main-nrf52.cpp during the cpuDeepSleep() function
+void variant_shutdown()
+{
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == PIN_GPS_EN || pin == PIN_BUTTON1) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+    digitalWrite(PIN_GPS_EN, HIGH);
+}

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
   ${nrf52840_base.lib_deps}
   ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -67,4 +67,8 @@ void variant_shutdown()
     nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
     nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
     nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+
+    nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
 }

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -15,6 +15,6 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/nano-g2-ultra/platformio.ini

@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini

@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/t-echo/platformio.ini

@@ -32,7 +32,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs
 
 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4