Merge branch 'develop' into agc-reset

* make channels.h getHash public

* router.* make the encrypted packet copy available for modules to access

* Update src/mesh/Router.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Set p_encrypted to nullptr after release

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

.trunk/trunk.yaml

@@ -9,14 +9,14 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.495
-    - renovate@42.64.1
+    - renovate@42.57.1
     - prettier@3.7.4
     - trufflehog@3.92.3
     - yamllint@1.37.1
     - bandit@1.9.2
-    - trivy@0.68.2
+    - trivy@0.68.1
     - taplo@0.10.0
-    - ruff@0.14.10
+    - ruff@0.14.9
     - isort@7.0.0
     - markdownlint@0.47.0
     - oxipng@10.0.0

bin/build-nrf52.sh

@@ -21,14 +21,13 @@ rm -f $BUILDDIR/firmware*
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
-ota_basename=${basename}-ota
 
 pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
+cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
 
 echo "Copying NRF52 UF2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2

bin/platformio-custom.py

@@ -17,8 +17,6 @@ lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
 
 def manifest_gather(source, target, env):
     out = []
-    board_platform = env.BoardConfig().get("platform")
-    needs_ota_suffix = board_platform == "nordicnrf52"
     check_paths = [
         progname,
         f"{progname}.elf",
@@ -34,11 +32,8 @@ def manifest_gather(source, target, env):
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
         if f.exists():
-            manifest_name = p
-            if needs_ota_suffix and p == f"{progname}.zip":
-                manifest_name = f"{progname}-ota.zip"
             d = {
-                "name": manifest_name,
+                "name": p,
                 "md5": f.get_content_hash(), # Returns MD5 hash
                 "bytes": f.get_size() # Returns file size in bytes
             }

platformio.ini

@@ -103,17 +103,13 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
+
+; Extra TCP/IP networking libs for supported devices
+[networking_extra]
+lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
@@ -162,8 +158,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
+	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU

src/graphics/niche/InkHUD/PlatformioConfig.ini

@@ -8,4 +8,5 @@ build_flags =
   -D MESHTASTIC_EXCLUDE_INPUTBROKER ; Suppress default input handling
   -D HAS_BUTTON=0 ; Suppress default ButtonThread
 lib_deps =
-  https://github.com/ZinggJM/GFX_Root#2.0.0 ; Used by InkHUD as a "slimmer" version of AdafruitGFX
+  # TODO renovate
+  https://github.com/ZinggJM/GFX_Root#2.0.0 ; Used by InkHUD as a "slimmer" version of AdafruitGFX

src/main.cpp

@@ -196,6 +196,8 @@ bool kb_found = false;
 // global bool to record that on-screen keyboard (OSK) is present
 bool osk_found = false;
 
+unsigned long last_listen = 0;
+
 // The I2C address of the RTC Module (if found)
 ScanI2C::DeviceAddress rtc_found = ScanI2C::ADDRESS_NONE;
 // The I2C address of the Accelerometer (if found)
@@ -428,10 +430,17 @@ void setup()
 #endif
 
 #if ARCH_PORTDUINO
+    RTCQuality ourQuality = RTCQualityDevice;
+
+    std::string timeCommandResult = exec("timedatectl status | grep synchronized | grep yes -c");
+    if (timeCommandResult[0] == '1') {
+        ourQuality = RTCQualityNTP;
+    }
+
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(ourQuality, &tv);
 #endif
 
     powerMonInit();
@@ -1602,6 +1611,13 @@ void loop()
 #endif
     power->powerCommandsCheck();
 
+    if (last_listen + 1000 * 60 < millis() &&
+        !(RadioLibInterface::instance->isSending() || RadioLibInterface::instance->isActivelyReceiving())) {
+        RadioLibInterface::instance->startReceive();
+        LOG_DEBUG("attempting AGC reset");
+        last_listen = millis();
+    }
+
 #ifdef DEBUG_STACK
     static uint32_t lastPrint = 0;
     if (!Throttle::isWithinTimespanMs(lastPrint, 10 * 1000L)) {

src/mesh/Channels.h

@@ -96,6 +96,8 @@ class Channels
 
     bool setDefaultPresetCryptoForHash(ChannelHash channelHash);
 
+    int16_t getHash(ChannelIndex i) { return hashes[i]; }
+
   private:
     /** Given a channel index, change to use the crypto key specified by that index
      *
@@ -113,8 +115,6 @@ class Channels
      */
     int16_t generateHash(ChannelIndex channelNum);
 
-    int16_t getHash(ChannelIndex i) { return hashes[i]; }
-
     /**
      * Validate a channel, fixing any errors as needed
      */

src/mesh/FloodingRouter.cpp

@@ -124,10 +124,6 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) {
         iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
     }
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE && iface && nodeDB &&
-        nodeDB->isFromOrToFavoritedNode(*p)) {
-        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
-    }
 }
 
 bool FloodingRouter::isRebroadcaster()

src/mesh/MeshService.cpp

@@ -276,10 +276,6 @@ bool MeshService::trySendPosition(NodeNum dest, bool wantReplies)
     if (nodeDB->hasValidPosition(node)) {
 #if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
         if (positionModule) {
-            if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
-                LOG_DEBUG("Skip position ping; no fresh position since boot");
-                return false;
-            }
             LOG_INFO("Send position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel);
             positionModule->sendOurPosition(dest, wantReplies, node->channel);
             return true;

src/mesh/NodeDB.cpp

@@ -53,7 +53,7 @@
 #endif
 
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
-#include <MeshtasticOTA.h>
+#include <WiFiOTA.h>
 #endif
 
 NodeDB *nodeDB = nullptr;
@@ -739,8 +739,8 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.compass_orientation = COMPASS_ORIENTATION;
 #endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
-    if (MeshtasticOTA::isUpdated()) {
-        MeshtasticOTA::recoverConfig(&config.network);
+    if (WiFiOTA::isUpdated()) {
+        WiFiOTA::recoverConfig(&config.network);
     }
 #endif
 
@@ -805,11 +805,11 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.output_ms = 500;
     moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
-    // Default to PIN_LED2 for external notification output (LED color depends on device variant)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
+    // Default to RAK led pin 2 (blue)
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.output = PIN_LED2;
-#if defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
+#if defined(MUZI_BASE)
     moduleConfig.external_notification.active = false;
 #else
     moduleConfig.external_notification.active = true;
@@ -1043,7 +1043,6 @@ void NodeDB::clearLocalPosition()
     node->position.altitude = 0;
     node->position.time = 0;
     setLocalPosition(meshtastic_Position_init_default);
-    localPositionUpdatedSinceBoot = false;
 }
 
 void NodeDB::cleanupMeshDB()

src/mesh/NodeDB.h

@@ -279,13 +279,9 @@ class NodeDB
         LOG_DEBUG("Set local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i,
                   position.time, position.timestamp);
         localPosition = position;
-        if (position.latitude_i != 0 || position.longitude_i != 0) {
-            localPositionUpdatedSinceBoot = true;
-        }
     }
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
-    bool hasLocalPositionSinceBoot() const { return localPositionUpdatedSinceBoot; }
 
 #if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
@@ -305,7 +301,6 @@ class NodeDB
 
   private:
     bool duplicateWarned = false;
-    bool localPositionUpdatedSinceBoot = false;
     uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash
     uint32_t lastBackupAttempt = 0; // when we last tried a backup automatically or manually
     uint32_t lastSort = 0;          // When last sorted the nodeDB

src/mesh/RadioInterface.cpp

@@ -296,6 +296,11 @@ bool RadioInterface::shouldRebroadcastEarlyLikeRouter(meshtastic_MeshPacket *p)
         return true;
     }
 
+    // If we are a CLIENT_BASE and the packet is from or to a favorited node, we should rebroadcast early
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
+        return nodeDB->isFromOrToFavoritedNode(*p);
+    }
+
     return false;
 }
 

src/mesh/Router.cpp

@@ -692,7 +692,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
 
     // Store a copy of encrypted packet for MQTT
     DEBUG_HEAP_BEFORE;
-    meshtastic_MeshPacket *p_encrypted = packetPool.allocCopy(*p);
+    p_encrypted = packetPool.allocCopy(*p);
     DEBUG_HEAP_AFTER("Router::handleReceived", p_encrypted);
 
     // Take those raw bytes and convert them back into a well structured protobuf we can understand
@@ -758,6 +758,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
     }
 
     packetPool.release(p_encrypted); // Release the encrypted packet
+    p_encrypted = nullptr;
 }
 
 void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)

src/mesh/Router.h

@@ -91,6 +91,9 @@ class Router : protected concurrency::OSThread, protected PacketHistory
         before us */
     uint32_t rxDupe = 0, txRelayCanceled = 0;
 
+    // pointer to the encrypted packet
+    meshtastic_MeshPacket *p_encrypted = nullptr;
+
   protected:
     friend class RoutingModule;
 

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -12,9 +12,6 @@ PB_BIND(meshtastic_AdminMessage, meshtastic_AdminMessage, 2)
 PB_BIND(meshtastic_AdminMessage_InputEvent, meshtastic_AdminMessage_InputEvent, AUTO)
 
 
-PB_BIND(meshtastic_AdminMessage_OTAEvent, meshtastic_AdminMessage_OTAEvent, AUTO)
-
-
 PB_BIND(meshtastic_HamParameters, meshtastic_HamParameters, AUTO)
 
 
@@ -36,5 +33,3 @@ PB_BIND(meshtastic_KeyVerificationAdmin, meshtastic_KeyVerificationAdmin, AUTO)
 
 
 
-
-

src/mesh/generated/meshtastic/admin.pb.h

@@ -16,16 +16,6 @@
 #endif
 
 /* Enum definitions */
-/* Firmware update mode for OTA updates */
-typedef enum _meshtastic_OTAMode {
-    /* Do not reboot into OTA mode */
-    meshtastic_OTAMode_NO_REBOOT_OTA = 0,
-    /* Reboot into OTA mode for BLE firmware update */
-    meshtastic_OTAMode_OTA_BLE = 1,
-    /* Reboot into OTA mode for WiFi firmware update */
-    meshtastic_OTAMode_OTA_WIFI = 2
-} meshtastic_OTAMode;
-
 /* TODO: REPLACE */
 typedef enum _meshtastic_AdminMessage_ConfigType {
     /* TODO: REPLACE */
@@ -113,17 +103,6 @@ typedef struct _meshtastic_AdminMessage_InputEvent {
     uint16_t touch_y;
 } meshtastic_AdminMessage_InputEvent;
 
-typedef PB_BYTES_ARRAY_T(32) meshtastic_AdminMessage_OTAEvent_ota_hash_t;
-/* User is requesting an over the air update.
- Node will reboot into the OTA loader */
-typedef struct _meshtastic_AdminMessage_OTAEvent {
-    /* Tell the node to reboot into OTA mode for firmware update via BLE or WiFi (ESP32 only for now) */
-    meshtastic_OTAMode reboot_ota_mode;
-    /* A 32 byte hash of the OTA firmware.
- Used to verify the integrity of the firmware before applying an update. */
-    meshtastic_AdminMessage_OTAEvent_ota_hash_t ota_hash;
-} meshtastic_AdminMessage_OTAEvent;
-
 /* Parameters for setting up Meshtastic for ameteur radio usage */
 typedef struct _meshtastic_HamParameters {
     /* Amateur radio call sign, eg. KD2ABC */
@@ -282,8 +261,7 @@ typedef struct _meshtastic_AdminMessage {
         /* Tell the node to factory reset config everything; all device state and configuration will be returned to factory defaults and BLE bonds will be cleared. */
         int32_t factory_reset_device;
         /* Tell the node to reboot into the OTA Firmware in this many seconds (or <0 to cancel reboot)
-     Only Implemented for ESP32 Devices. This needs to be issued to send a new main firmware via bluetooth.
-     Deprecated in favor of reboot_ota_mode in 2.7.17 */
+     Only Implemented for ESP32 Devices. This needs to be issued to send a new main firmware via bluetooth. */
         int32_t reboot_ota_seconds;
         /* This message is only supported for the simulator Portduino build.
      If received the simulator will exit successfully. */
@@ -297,8 +275,6 @@ typedef struct _meshtastic_AdminMessage {
         /* Tell the node to reset the nodedb.
      When true, favorites are preserved through reset. */
         bool nodedb_reset;
-        /* Tell the node to reset into the OTA Loader */
-        meshtastic_AdminMessage_OTAEvent ota_request;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -312,10 +288,6 @@ extern "C" {
 #endif
 
 /* Helper constants for enums */
-#define _meshtastic_OTAMode_MIN meshtastic_OTAMode_NO_REBOOT_OTA
-#define _meshtastic_OTAMode_MAX meshtastic_OTAMode_OTA_WIFI
-#define _meshtastic_OTAMode_ARRAYSIZE ((meshtastic_OTAMode)(meshtastic_OTAMode_OTA_WIFI+1))
-
 #define _meshtastic_AdminMessage_ConfigType_MIN meshtastic_AdminMessage_ConfigType_DEVICE_CONFIG
 #define _meshtastic_AdminMessage_ConfigType_MAX meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
@@ -339,8 +311,6 @@ extern "C" {
 #define meshtastic_AdminMessage_payload_variant_remove_backup_preferences_ENUMTYPE meshtastic_AdminMessage_BackupLocation
 
 
-#define meshtastic_AdminMessage_OTAEvent_reboot_ota_mode_ENUMTYPE meshtastic_OTAMode
-
 
 
 
@@ -350,14 +320,12 @@ extern "C" {
 /* Initializer values for message structs */
 #define meshtastic_AdminMessage_init_default     {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_default {0, 0, 0, 0}
-#define meshtastic_AdminMessage_OTAEvent_init_default {_meshtastic_OTAMode_MIN, {0, {0}}}
 #define meshtastic_HamParameters_init_default    {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_default {0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}}
 #define meshtastic_SharedContact_init_default    {0, false, meshtastic_User_init_default, 0, 0}
 #define meshtastic_KeyVerificationAdmin_init_default {_meshtastic_KeyVerificationAdmin_MessageType_MIN, 0, 0, false, 0}
 #define meshtastic_AdminMessage_init_zero        {0, {0}, {0, {0}}}
 #define meshtastic_AdminMessage_InputEvent_init_zero {0, 0, 0, 0}
-#define meshtastic_AdminMessage_OTAEvent_init_zero {_meshtastic_OTAMode_MIN, {0, {0}}}
 #define meshtastic_HamParameters_init_zero       {"", 0, 0, ""}
 #define meshtastic_NodeRemoteHardwarePinsResponse_init_zero {0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}}
 #define meshtastic_SharedContact_init_zero       {0, false, meshtastic_User_init_zero, 0, 0}
@@ -368,8 +336,6 @@ extern "C" {
 #define meshtastic_AdminMessage_InputEvent_kb_char_tag 2
 #define meshtastic_AdminMessage_InputEvent_touch_x_tag 3
 #define meshtastic_AdminMessage_InputEvent_touch_y_tag 4
-#define meshtastic_AdminMessage_OTAEvent_reboot_ota_mode_tag 1
-#define meshtastic_AdminMessage_OTAEvent_ota_hash_tag 2
 #define meshtastic_HamParameters_call_sign_tag   1
 #define meshtastic_HamParameters_tx_power_tag    2
 #define meshtastic_HamParameters_frequency_tag   3
@@ -437,7 +403,6 @@ extern "C" {
 #define meshtastic_AdminMessage_shutdown_seconds_tag 98
 #define meshtastic_AdminMessage_factory_reset_config_tag 99
 #define meshtastic_AdminMessage_nodedb_reset_tag 100
-#define meshtastic_AdminMessage_ota_request_tag  102
 #define meshtastic_AdminMessage_session_passkey_tag 101
 
 /* Struct field encoding specification for nanopb */
@@ -496,8 +461,7 @@ X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_seconds,reboot_second
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,shutdown_seconds,shutdown_seconds),  98) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory_reset_config),  99) \
 X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
-X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 102)
+X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL
 #define meshtastic_AdminMessage_payload_variant_get_channel_response_MSGTYPE meshtastic_Channel
@@ -518,7 +482,6 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,ota_request,ota_request), 10
 #define meshtastic_AdminMessage_payload_variant_store_ui_config_MSGTYPE meshtastic_DeviceUIConfig
 #define meshtastic_AdminMessage_payload_variant_add_contact_MSGTYPE meshtastic_SharedContact
 #define meshtastic_AdminMessage_payload_variant_key_verification_MSGTYPE meshtastic_KeyVerificationAdmin
-#define meshtastic_AdminMessage_payload_variant_ota_request_MSGTYPE meshtastic_AdminMessage_OTAEvent
 
 #define meshtastic_AdminMessage_InputEvent_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   event_code,        1) \
@@ -528,12 +491,6 @@ X(a, STATIC,   SINGULAR, UINT32,   touch_y,           4)
 #define meshtastic_AdminMessage_InputEvent_CALLBACK NULL
 #define meshtastic_AdminMessage_InputEvent_DEFAULT NULL
 
-#define meshtastic_AdminMessage_OTAEvent_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, UENUM,    reboot_ota_mode,   1) \
-X(a, STATIC,   SINGULAR, BYTES,    ota_hash,          2)
-#define meshtastic_AdminMessage_OTAEvent_CALLBACK NULL
-#define meshtastic_AdminMessage_OTAEvent_DEFAULT NULL
-
 #define meshtastic_HamParameters_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, STRING,   call_sign,         1) \
 X(a, STATIC,   SINGULAR, INT32,    tx_power,          2) \
@@ -567,7 +524,6 @@ X(a, STATIC,   OPTIONAL, UINT32,   security_number,   4)
 
 extern const pb_msgdesc_t meshtastic_AdminMessage_msg;
 extern const pb_msgdesc_t meshtastic_AdminMessage_InputEvent_msg;
-extern const pb_msgdesc_t meshtastic_AdminMessage_OTAEvent_msg;
 extern const pb_msgdesc_t meshtastic_HamParameters_msg;
 extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 extern const pb_msgdesc_t meshtastic_SharedContact_msg;
@@ -576,7 +532,6 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
 #define meshtastic_AdminMessage_fields &meshtastic_AdminMessage_msg
 #define meshtastic_AdminMessage_InputEvent_fields &meshtastic_AdminMessage_InputEvent_msg
-#define meshtastic_AdminMessage_OTAEvent_fields &meshtastic_AdminMessage_OTAEvent_msg
 #define meshtastic_HamParameters_fields &meshtastic_HamParameters_msg
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 #define meshtastic_SharedContact_fields &meshtastic_SharedContact_msg
@@ -585,7 +540,6 @@ extern const pb_msgdesc_t meshtastic_KeyVerificationAdmin_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_ADMIN_PB_H_MAX_SIZE meshtastic_AdminMessage_size
 #define meshtastic_AdminMessage_InputEvent_size  14
-#define meshtastic_AdminMessage_OTAEvent_size    36
 #define meshtastic_AdminMessage_size             511
 #define meshtastic_HamParameters_size            31
 #define meshtastic_KeyVerificationAdmin_size     25

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -24,9 +24,6 @@ PB_BIND(meshtastic_Data, meshtastic_Data, 2)
 PB_BIND(meshtastic_KeyVerification, meshtastic_KeyVerification, AUTO)
 
 
-PB_BIND(meshtastic_StoreForwardPlusPlus, meshtastic_StoreForwardPlusPlus, 2)
-
-
 PB_BIND(meshtastic_Waypoint, meshtastic_Waypoint, AUTO)
 
 
@@ -124,8 +121,6 @@ PB_BIND(meshtastic_ChunkedPayloadResponse, meshtastic_ChunkedPayloadResponse, AU
 
 
 
-
-
 
 
 

src/mesh/generated/meshtastic/mesh.pb.h

@@ -478,22 +478,6 @@ typedef enum _meshtastic_Routing_Error {
     meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED = 38
 } meshtastic_Routing_Error;
 
-/* Enum of message types */
-typedef enum _meshtastic_StoreForwardPlusPlus_SFPP_message_type {
-    /* Send an announcement of the canonical tip of a chain */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_CANON_ANNOUNCE = 0,
-    /* Query whether a specific link is on the chain */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_CHAIN_QUERY = 1,
-    /* Request the next link in the chain */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_REQUEST = 3,
-    /* Provide a link to add to the chain */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE = 4,
-    /* If we must fragment, send the first half */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_FIRSTHALF = 5,
-    /* If we must fragment, send the second half */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF = 6
-} meshtastic_StoreForwardPlusPlus_SFPP_message_type;
-
 /* The priority of this message for sending.
  Higher priorities are sent first (when managing the transmit queue).
  This field is never sent over the air, it is only used internally inside of a local device node.
@@ -798,32 +782,6 @@ typedef struct _meshtastic_KeyVerification {
     meshtastic_KeyVerification_hash2_t hash2;
 } meshtastic_KeyVerification;
 
-typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_message_hash_t;
-typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_commit_hash_t;
-typedef PB_BYTES_ARRAY_T(32) meshtastic_StoreForwardPlusPlus_root_hash_t;
-typedef PB_BYTES_ARRAY_T(240) meshtastic_StoreForwardPlusPlus_message_t;
-/* The actual over-the-mesh message doing store and forward++ */
-typedef struct _meshtastic_StoreForwardPlusPlus {
-    /* Which message type is this */
-    meshtastic_StoreForwardPlusPlus_SFPP_message_type sfpp_message_type;
-    /* The hash of the specific message */
-    meshtastic_StoreForwardPlusPlus_message_hash_t message_hash;
-    /* The hash of a link on a chain */
-    meshtastic_StoreForwardPlusPlus_commit_hash_t commit_hash;
-    /* the root hash of a chain */
-    meshtastic_StoreForwardPlusPlus_root_hash_t root_hash;
-    /* The encrypted bytes from a message */
-    meshtastic_StoreForwardPlusPlus_message_t message;
-    /* Message ID of the contained message */
-    uint32_t encapsulated_id;
-    /* Destination of the contained message */
-    uint32_t encapsulated_to;
-    /* Sender of the contained message */
-    uint32_t encapsulated_from;
-    /* The receive time of the message in question */
-    uint32_t encapsulated_rxtime;
-} meshtastic_StoreForwardPlusPlus;
-
 /* Waypoint message, used to share arbitrary locations across the mesh */
 typedef struct _meshtastic_Waypoint {
     /* Id of the waypoint */
@@ -1352,10 +1310,6 @@ extern "C" {
 #define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED
 #define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_RATE_LIMIT_EXCEEDED+1))
 
-#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN meshtastic_StoreForwardPlusPlus_SFPP_message_type_CANON_ANNOUNCE
-#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_MAX meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF
-#define _meshtastic_StoreForwardPlusPlus_SFPP_message_type_ARRAYSIZE ((meshtastic_StoreForwardPlusPlus_SFPP_message_type)(meshtastic_StoreForwardPlusPlus_SFPP_message_type_LINK_PROVIDE_SECONDHALF+1))
-
 #define _meshtastic_MeshPacket_Priority_MIN meshtastic_MeshPacket_Priority_UNSET
 #define _meshtastic_MeshPacket_Priority_MAX meshtastic_MeshPacket_Priority_MAX
 #define _meshtastic_MeshPacket_Priority_ARRAYSIZE ((meshtastic_MeshPacket_Priority)(meshtastic_MeshPacket_Priority_MAX+1))
@@ -1384,8 +1338,6 @@ extern "C" {
 #define meshtastic_Data_portnum_ENUMTYPE meshtastic_PortNum
 
 
-#define meshtastic_StoreForwardPlusPlus_sfpp_message_type_ENUMTYPE meshtastic_StoreForwardPlusPlus_SFPP_message_type
-
 
 
 #define meshtastic_MeshPacket_priority_ENUMTYPE meshtastic_MeshPacket_Priority
@@ -1428,7 +1380,6 @@ extern "C" {
 #define meshtastic_Routing_init_default          {0, {meshtastic_RouteDiscovery_init_default}}
 #define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_KeyVerification_init_default  {0, {0, {0}}, {0, {0}}}
-#define meshtastic_StoreForwardPlusPlus_init_default {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
@@ -1460,7 +1411,6 @@ extern "C" {
 #define meshtastic_Routing_init_zero             {0, {meshtastic_RouteDiscovery_init_zero}}
 #define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_KeyVerification_init_zero     {0, {0, {0}}, {0, {0}}}
-#define meshtastic_StoreForwardPlusPlus_init_zero {_meshtastic_StoreForwardPlusPlus_SFPP_message_type_MIN, {0, {0}}, {0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0, _meshtastic_MeshPacket_TransportMechanism_MIN}
@@ -1539,15 +1489,6 @@ extern "C" {
 #define meshtastic_KeyVerification_nonce_tag     1
 #define meshtastic_KeyVerification_hash1_tag     2
 #define meshtastic_KeyVerification_hash2_tag     3
-#define meshtastic_StoreForwardPlusPlus_sfpp_message_type_tag 1
-#define meshtastic_StoreForwardPlusPlus_message_hash_tag 2
-#define meshtastic_StoreForwardPlusPlus_commit_hash_tag 3
-#define meshtastic_StoreForwardPlusPlus_root_hash_tag 4
-#define meshtastic_StoreForwardPlusPlus_message_tag 5
-#define meshtastic_StoreForwardPlusPlus_encapsulated_id_tag 6
-#define meshtastic_StoreForwardPlusPlus_encapsulated_to_tag 7
-#define meshtastic_StoreForwardPlusPlus_encapsulated_from_tag 8
-#define meshtastic_StoreForwardPlusPlus_encapsulated_rxtime_tag 9
 #define meshtastic_Waypoint_id_tag               1
 #define meshtastic_Waypoint_latitude_i_tag       2
 #define meshtastic_Waypoint_longitude_i_tag      3
@@ -1764,19 +1705,6 @@ X(a, STATIC,   SINGULAR, BYTES,    hash2,             3)
 #define meshtastic_KeyVerification_CALLBACK NULL
 #define meshtastic_KeyVerification_DEFAULT NULL
 
-#define meshtastic_StoreForwardPlusPlus_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, UENUM,    sfpp_message_type,   1) \
-X(a, STATIC,   SINGULAR, BYTES,    message_hash,      2) \
-X(a, STATIC,   SINGULAR, BYTES,    commit_hash,       3) \
-X(a, STATIC,   SINGULAR, BYTES,    root_hash,         4) \
-X(a, STATIC,   SINGULAR, BYTES,    message,           5) \
-X(a, STATIC,   SINGULAR, UINT32,   encapsulated_id,   6) \
-X(a, STATIC,   SINGULAR, UINT32,   encapsulated_to,   7) \
-X(a, STATIC,   SINGULAR, UINT32,   encapsulated_from,   8) \
-X(a, STATIC,   SINGULAR, UINT32,   encapsulated_rxtime,   9)
-#define meshtastic_StoreForwardPlusPlus_CALLBACK NULL
-#define meshtastic_StoreForwardPlusPlus_DEFAULT NULL
-
 #define meshtastic_Waypoint_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   id,                1) \
 X(a, STATIC,   OPTIONAL, SFIXED32, latitude_i,        2) \
@@ -2052,7 +1980,6 @@ extern const pb_msgdesc_t meshtastic_RouteDiscovery_msg;
 extern const pb_msgdesc_t meshtastic_Routing_msg;
 extern const pb_msgdesc_t meshtastic_Data_msg;
 extern const pb_msgdesc_t meshtastic_KeyVerification_msg;
-extern const pb_msgdesc_t meshtastic_StoreForwardPlusPlus_msg;
 extern const pb_msgdesc_t meshtastic_Waypoint_msg;
 extern const pb_msgdesc_t meshtastic_MqttClientProxyMessage_msg;
 extern const pb_msgdesc_t meshtastic_MeshPacket_msg;
@@ -2086,7 +2013,6 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_Routing_fields &meshtastic_Routing_msg
 #define meshtastic_Data_fields &meshtastic_Data_msg
 #define meshtastic_KeyVerification_fields &meshtastic_KeyVerification_msg
-#define meshtastic_StoreForwardPlusPlus_fields &meshtastic_StoreForwardPlusPlus_msg
 #define meshtastic_Waypoint_fields &meshtastic_Waypoint_msg
 #define meshtastic_MqttClientProxyMessage_fields &meshtastic_MqttClientProxyMessage_msg
 #define meshtastic_MeshPacket_fields &meshtastic_MeshPacket_msg
@@ -2143,7 +2069,6 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_QueueStatus_size              23
 #define meshtastic_RouteDiscovery_size           256
 #define meshtastic_Routing_size                  259
-#define meshtastic_StoreForwardPlusPlus_size     371
 #define meshtastic_ToRadio_size                  504
 #define meshtastic_User_size                     115
 #define meshtastic_Waypoint_size                 165

src/mesh/generated/meshtastic/portnums.pb.h

@@ -86,11 +86,6 @@ typedef enum _meshtastic_PortNum {
     /* Paxcounter lib included in the firmware
  ENCODING: protobuf */
     meshtastic_PortNum_PAXCOUNTER_APP = 34,
-    /* Store and Forward++ module included in the firmware
- ENCODING: protobuf
- This module is specifically for Native Linux nodes, and provides a Git-style
- chain of messages. */
-    meshtastic_PortNum_STORE_FORWARD_PLUSPLUS_APP = 35,
     /* Provides a hardware serial interface to send and receive from the Meshtastic network.
  Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic
  network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network.

src/modules/AdminModule.cpp

@@ -9,8 +9,11 @@
 #include "meshUtils.h"
 #include <FSCommon.h>
 #include <ctype.h> // for better whitespace handling
+#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_BLUETOOTH
+#include "BleOta.h"
+#endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
-#include "MeshtasticOTA.h"
+#include "WiFiOTA.h"
 #endif
 #include "Router.h"
 #include "configuration.h"
@@ -233,25 +236,26 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         reboot(r->reboot_seconds);
         break;
     }
-    case meshtastic_AdminMessage_ota_request_tag: {
+    case meshtastic_AdminMessage_reboot_ota_seconds_tag: {
+        int32_t s = r->reboot_ota_seconds;
 #if defined(ARCH_ESP32)
-        if (r->ota_request.ota_hash.size != 32) {
-            LOG_INFO("OTA Failed: Invalid `ota_hash` provided");
-            break;
-        }
-
-        meshtastic_OTAMode mode = r->ota_request.reboot_ota_mode;
-        if (MeshtasticOTA::trySwitchToOTA()) {
-            LOG_INFO("OTA Requested");
+#if !MESHTASTIC_EXCLUDE_BLUETOOTH
+        if (!BleOta::getOtaAppVersion().isEmpty()) {
             if (screen)
                 screen->startFirmwareUpdateScreen();
-            MeshtasticOTA::saveConfig(&config.network, mode, r->ota_request.ota_hash.bytes);
-            LOG_INFO("Rebooting to WiFi OTA");
-        } else {
-            LOG_INFO("WIFI OTA Failed");
+            BleOta::switchToOtaApp();
+            LOG_INFO("Rebooting to BLE OTA");
         }
 #endif
-        int s = 1; // Reboot in 1 second, hard coded
+#if !MESHTASTIC_EXCLUDE_WIFI
+        if (WiFiOTA::trySwitchToOTA()) {
+            if (screen)
+                screen->startFirmwareUpdateScreen();
+            WiFiOTA::saveConfig(&config.network);
+            LOG_INFO("Rebooting to WiFi OTA");
+        }
+#endif
+#endif
         LOG_INFO("Reboot in %d seconds", s);
         rebootAtMsec = (s < 0) ? 0 : (millis() + s * 1000);
         break;

src/modules/NodeInfoModule.cpp

@@ -7,41 +7,17 @@
 #include "configuration.h"
 #include "main.h"
 #include <Throttle.h>
-#include <algorithm>
-
-#ifndef USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS
-#define USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS (12 * 60 * 60)
-#endif
 
 NodeInfoModule *nodeInfoModule;
 
-static constexpr uint32_t NodeInfoReplySuppressSeconds = USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS;
-
 bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_User *pptr)
 {
-    suppressReplyForCurrentRequest = false;
-
     if (mp.from == nodeDB->getNodeNum()) {
         LOG_WARN("Ignoring packet supposed to be from our own node: %08x", mp.from);
         return false;
     }
 
     auto p = *pptr;
-
-    if (mp.decoded.want_response) {
-        const NodeNum sender = getFrom(&mp);
-        const uint32_t now = mp.rx_time ? mp.rx_time : getTime();
-        auto it = lastNodeInfoSeen.find(sender);
-        if (it != lastNodeInfoSeen.end()) {
-            uint32_t sinceLast = now >= it->second ? now - it->second : 0;
-            if (sinceLast < NodeInfoReplySuppressSeconds) {
-                suppressReplyForCurrentRequest = true;
-            }
-        }
-        lastNodeInfoSeen[sender] = now;
-        pruneLastNodeInfoCache();
-    }
-
     if (p.is_licensed != owner.is_licensed) {
         LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
         return true;
@@ -66,8 +42,6 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
         service->sendToPhone(packetCopy);
     }
 
-    pruneLastNodeInfoCache();
-
     // LOG_DEBUG("did handleReceived");
     return false; // Let others look at this message also if they want
 }
@@ -94,11 +68,9 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
 
     if (p) { // Check whether we didn't ignore it
         p->to = dest;
-        bool requestWantResponse = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
+        p->decoded.want_response = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
                                     config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
                                    wantReplies;
-
-        p->decoded.want_response = requestWantResponse;
         if (_shorterTimeout)
             p->priority = meshtastic_MeshPacket_Priority_DEFAULT;
         else
@@ -117,13 +89,6 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
 
 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
-    if (suppressReplyForCurrentRequest) {
-        LOG_DEBUG("Skip send NodeInfo since we heard the requester <12h ago");
-        ignoreRequest = true;
-        suppressReplyForCurrentRequest = false;
-        return NULL;
-    }
-
     if (!airTime->isTxAllowedChannelUtil(false)) {
         ignoreRequest = true; // Mark it as ignored for MeshModule
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
@@ -160,29 +125,6 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
     }
 }
 
-void NodeInfoModule::pruneLastNodeInfoCache()
-{
-    if (!nodeDB || !nodeDB->meshNodes)
-        return;
-
-    const size_t maxEntries = nodeDB->meshNodes->size();
-
-    for (auto it = lastNodeInfoSeen.begin(); it != lastNodeInfoSeen.end();) {
-        if (!nodeDB->getMeshNode(it->first)) {
-            it = lastNodeInfoSeen.erase(it);
-        } else {
-            ++it;
-        }
-    }
-
-    while (!lastNodeInfoSeen.empty() && lastNodeInfoSeen.size() > maxEntries) {
-        auto oldestIt = std::min_element(lastNodeInfoSeen.begin(), lastNodeInfoSeen.end(),
-                                         [](const std::pair<const NodeNum, uint32_t> &lhs,
-                                            const std::pair<const NodeNum, uint32_t> &rhs) { return lhs.second < rhs.second; });
-        lastNodeInfoSeen.erase(oldestIt);
-    }
-}
-
 NodeInfoModule::NodeInfoModule()
     : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfo")
 {

src/modules/NodeInfoModule.h

@@ -1,6 +1,5 @@
 #pragma once
 #include "ProtobufModule.h"
-#include <map>
 
 /**
  * NodeInfo module for sending/receiving NodeInfos into the mesh
@@ -44,10 +43,6 @@ class NodeInfoModule : public ProtobufModule<meshtastic_User>, private concurren
   private:
     uint32_t lastSentToMesh = 0; // Last time we sent our NodeInfo to the mesh
     bool shorterTimeout = false;
-    bool suppressReplyForCurrentRequest = false;
-    std::map<NodeNum, uint32_t> lastNodeInfoSeen;
-
-    void pruneLastNodeInfoCache();
 };
 
 extern NodeInfoModule *nodeInfoModule;

src/modules/PositionModule.cpp

@@ -349,11 +349,6 @@ void PositionModule::sendOurPosition()
 
 void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t channel)
 {
-    if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
-        LOG_DEBUG("Skip position send; no fresh position since boot");
-        return;
-    }
-
     // cancel any not yet sent (now stale) position packets
     if (prevPacketId) // if we wrap around to zero, we'll simply fail to cancel in that rare case (no big deal)
         service->cancelSending(prevPacketId);
@@ -425,14 +420,8 @@ int32_t PositionModule::runOnce()
         return RUNONCE_INTERVAL;
     }
 
-    bool waitingForFreshPosition = (lastGpsSend == 0) && !config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot();
-
     if (lastGpsSend == 0 || msSinceLastSend >= intervalMs) {
-        if (waitingForFreshPosition) {
-#ifdef GPS_DEBUG
-            LOG_DEBUG("Skip initial position send; no fresh position since boot");
-#endif
-        } else if (nodeDB->hasValidPosition(node)) {
+        if (nodeDB->hasValidPosition(node)) {
             lastGpsSend = now;
 
             lastGpsLatitude = node->position.latitude_i;

src/modules/StatusLEDModule.cpp

@@ -26,11 +26,7 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
                 power_state = charged;
             }
         } else {
-            if (powerStatus->getBatteryChargePercent() > 5) {
-                power_state = discharging;
-            } else {
-                power_state = critical;
-            }
+            power_state = discharging;
         }
         break;
     }
@@ -62,33 +58,16 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
 
 int32_t StatusLEDModule::runOnce()
 {
-    my_interval = 1000;
 
     if (power_state == charging) {
         CHARGE_LED_state = !CHARGE_LED_state;
     } else if (power_state == charged) {
         CHARGE_LED_state = LED_STATE_ON;
-    } else if (power_state == critical) {
-        if (POWER_LED_starttime + 30000 < millis() && !doing_fast_blink) {
-            doing_fast_blink = true;
-            POWER_LED_starttime = millis();
-        }
-        if (doing_fast_blink) {
-            PAIRING_LED_state = LED_STATE_OFF;
-            CHARGE_LED_state = !CHARGE_LED_state;
-            my_interval = 250;
-            if (POWER_LED_starttime + 2000 < millis()) {
-                doing_fast_blink = false;
-            }
-        } else {
-            CHARGE_LED_state = LED_STATE_OFF;
-        }
-
     } else {
         CHARGE_LED_state = LED_STATE_OFF;
     }
 
-    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis() || doing_fast_blink) {
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
         PAIRING_LED_state = LED_STATE_OFF;
     } else if (ble_state == unpaired) {
         if (slowTrack) {

src/modules/StatusLEDModule.h

@@ -31,10 +31,8 @@ class StatusLEDModule : private concurrency::OSThread
     bool PAIRING_LED_state = LED_STATE_OFF;
 
     uint32_t PAIRING_LED_starttime = 0;
-    uint32_t POWER_LED_starttime = 0;
-    bool doing_fast_blink = false;
 
-    enum PowerState { discharging, charging, charged, critical };
+    enum PowerState { discharging, charging, charged };
 
     PowerState power_state = discharging;
 

src/nimble/NimbleBluetooth.cpp

@@ -14,11 +14,11 @@
 #include <atomic>
 #include <mutex>
 
+#ifdef NIMBLE_TWO
 #include "NimBLEAdvertising.h"
-#ifdef CONFIG_BT_NIMBLE_EXT_ADV
 #include "NimBLEExtAdvertising.h"
-#endif
 #include "PowerStatus.h"
+#endif
 
 #if defined(CONFIG_NIMBLE_CPP_IDF)
 #include "host/ble_gap.h"
@@ -26,12 +26,15 @@
 #include "nimble/nimble/host/include/host/ble_gap.h"
 #endif
 
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+
 namespace
 {
 constexpr uint16_t kPreferredBleMtu = 517;
 constexpr uint16_t kPreferredBleTxOctets = 251;
 constexpr uint16_t kPreferredBleTxTimeUs = (kPreferredBleTxOctets + 14) * 8;
 } // namespace
+#endif
 
 // Debugging options: careful, they slow things down quite a bit!
 // #define DEBUG_NIMBLE_ON_READ_TIMING  // uncomment to time onRead duration
@@ -310,9 +313,11 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     {
         PhoneAPI::onNowHasData(fromRadioNum);
 
-#ifdef DEBUG_NIMBLE_NOTIFY
         int currentNotifyCount = notifyCount.fetch_add(1);
+
         uint8_t cc = bleServer->getConnectedCount();
+
+#ifdef DEBUG_NIMBLE_NOTIFY
         // This logging slows things down when there are lots of packets going to the phone, like initial connection:
         LOG_DEBUG("BLE notify(%d) fromNum: %d connections: %d", currentNotifyCount, fromRadioNum, cc);
 #endif
@@ -321,7 +326,13 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
         put_le32(val, fromRadioNum);
 
         fromNumCharacteristic->setValue(val, sizeof(val));
+#ifdef NIMBLE_TWO
+        // NOTE: I don't have any NIMBLE_TWO devices, but this line makes me suspicious, and I suspect it needs to just be
+        // notify().
         fromNumCharacteristic->notify(val, sizeof(val), BLE_HS_CONN_HANDLE_NONE);
+#else
+        fromNumCharacteristic->notify();
+#endif
     }
 
     /// Check the current underlying physical link to see if the client is currently connected
@@ -386,7 +397,12 @@ static uint8_t lastToRadio[MAX_TO_FROM_RADIO_SIZE];
 
 class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 {
-    void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
+#ifdef NIMBLE_TWO
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+#else
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic)
+
+#endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
         // Assumption: onWrite is serialized by NimBLE, so we don't need to lock here against multiple concurrent onWrite calls.
@@ -433,7 +449,11 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 
 class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
-    void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
+#ifdef NIMBLE_TWO
+    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+#else
+    virtual void onRead(NimBLECharacteristic *pCharacteristic)
+#endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
 
@@ -541,27 +561,32 @@ class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 
 class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
 {
+#ifdef NIMBLE_TWO
   public:
-    explicit NimbleBluetoothServerCallback(NimbleBluetooth *ble) : ble(ble) {}
+    NimbleBluetoothServerCallback(NimbleBluetooth *ble) { this->ble = ble; }
 
   private:
     NimbleBluetooth *ble;
 
-    uint32_t onPassKeyDisplay() override
+    virtual uint32_t onPassKeyDisplay()
+#else
+    virtual uint32_t onPassKeyRequest()
+#endif
     {
         uint32_t passkey = config.bluetooth.fixed_pin;
 
         if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
             LOG_INFO("Use random passkey");
+            // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
             passkey = random(100000, 999999);
         }
-        LOG_INFO("*** Enter passkey %06u on the peer side ***", passkey);
+        LOG_INFO("*** Enter passkey %d on the peer side ***", passkey);
 
         powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
         meshtastic::BluetoothStatus newStatus(std::to_string(passkey));
         bluetoothStatus->updateStatus(&newStatus);
 
-#if HAS_SCREEN
+#if HAS_SCREEN // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (screen) {
             screen->startAlert([passkey](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
                 char btPIN[16] = "888888";
@@ -590,29 +615,39 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
             });
         }
 #endif
-
         passkeyShowing = true;
+
         return passkey;
     }
 
-    void onAuthenticationComplete(NimBLEConnInfo &connInfo) override
+#ifdef NIMBLE_TWO
+    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo)
+#else
+    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc)
+#endif
     {
         LOG_INFO("BLE authentication complete");
 
         meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::CONNECTED);
         bluetoothStatus->updateStatus(&newStatus);
 
+        // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (passkeyShowing) {
             passkeyShowing = false;
-            if (screen) {
+            if (screen)
                 screen->endAlert();
-            }
         }
 
+        // Store the connection handle for future use
+#ifdef NIMBLE_TWO
         nimbleBluetoothConnHandle = connInfo.getConnHandle();
+#else
+        nimbleBluetoothConnHandle = desc->conn_handle;
+#endif
     }
 
-    void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo) override
+#ifdef NIMBLE_TWO
+    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
     {
         LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());
 
@@ -637,12 +672,21 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
         LOG_INFO("BLE conn %u initial MTU %u (target %u)", connHandle, connInfo.getMTU(), kPreferredBleMtu);
         pServer->updateConnParams(connHandle, 6, 12, 0, 200);
     }
+#endif
 
-    void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason) override
+#ifdef NIMBLE_TWO
+    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
     {
         LOG_INFO("BLE disconnect reason: %d", reason);
+#else
+    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc)
+    {
+        LOG_INFO("BLE disconnect");
+#endif
+#ifdef NIMBLE_TWO
         if (ble->isDeInit)
             return;
+#endif
 
         meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED);
         bluetoothStatus->updateStatus(&newStatus);
@@ -666,69 +710,35 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
             bluetoothPhoneAPI->writeCount = 0;
         }
 
+        // Clear the last ToRadio packet buffer to avoid rejecting first packet from new connection
         memset(lastToRadio, 0, sizeof(lastToRadio));
 
-        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE;
+        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE; // BLE_HS_CONN_HANDLE_NONE means "no connection"
 
+#ifdef NIMBLE_TWO
+        // Restart Advertising
         ble->startAdvertising();
+#else
+        NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+        if (!pAdvertising->start(0)) {
+            if (pAdvertising->isAdvertising()) {
+                LOG_DEBUG("BLE advertising already running");
+            } else {
+                LOG_ERROR("BLE failed to restart advertising");
+            }
+        }
+#endif
     }
 };
 
 static NimbleBluetoothToRadioCallback *toRadioCallbacks;
 static NimbleBluetoothFromRadioCallback *fromRadioCallbacks;
 
-void NimbleBluetooth::startAdvertising()
-{
-#if defined(CONFIG_BT_NIMBLE_EXT_ADV)
-    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    NimBLEExtAdvertisement legacyAdvertising;
-
-    legacyAdvertising.setLegacyAdvertising(true);
-    legacyAdvertising.setScannable(true);
-    legacyAdvertising.setConnectable(true);
-    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
-    if (powerStatus->getHasBattery() == 1) {
-        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
-    }
-    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
-    legacyAdvertising.setMinInterval(500);
-    legacyAdvertising.setMaxInterval(1000);
-
-    NimBLEExtAdvertisement legacyScanResponse;
-    legacyScanResponse.setLegacyAdvertising(true);
-    legacyScanResponse.setConnectable(true);
-    legacyScanResponse.setName(getDeviceName());
-
-    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
-        LOG_ERROR("BLE failed to set legacyAdvertising");
-    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
-        LOG_ERROR("BLE failed to set legacyScanResponse");
-    } else if (!pAdvertising->start(0, 0, 0)) {
-        LOG_ERROR("BLE failed to start legacyAdvertising");
-    }
-#else
-    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    pAdvertising->reset();
-    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
-    if (powerStatus->getHasBattery() == 1) {
-        pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f));
-    }
-
-    NimBLEAdvertisementData scan;
-    scan.setName(getDeviceName());
-    pAdvertising->setScanResponseData(scan);
-    pAdvertising->enableScanResponse(true);
-
-    if (!pAdvertising->start(0)) {
-        LOG_ERROR("BLE failed to start advertising");
-    }
-#endif
-    LOG_DEBUG("BLE Advertising started");
-}
-
 void NimbleBluetooth::shutdown()
 {
+    // No measurable power saving for ESP32 during light-sleep(?)
 #ifndef ARCH_ESP32
+    // Shutdown bluetooth for minimum power draw
     LOG_INFO("Disable bluetooth");
     NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
     pAdvertising->reset();
@@ -736,6 +746,7 @@ void NimbleBluetooth::shutdown()
 #endif
 }
 
+// Proper shutdown for ESP32. Needs reboot to reverse.
 void NimbleBluetooth::deinit()
 {
 #ifdef ARCH_ESP32
@@ -749,17 +760,21 @@ void NimbleBluetooth::deinit()
     digitalWrite(BLE_LED, LOW);
 #endif
 #endif
+#ifndef NIMBLE_TWO
+    NimBLEDevice::deinit();
+#endif
 #endif
 }
 
+// Has initial setup been completed
 bool NimbleBluetooth::isActive()
 {
-    return bleServer != nullptr;
+    return bleServer;
 }
 
 bool NimbleBluetooth::isConnected()
 {
-    return bleServer && bleServer->getConnectedCount() > 0;
+    return bleServer->getConnectedCount() > 0;
 }
 
 int NimbleBluetooth::getRssi()
@@ -803,7 +818,7 @@ void NimbleBluetooth::setup()
     LOG_INFO("Init the NimBLE bluetooth module");
 
     NimBLEDevice::init(getDeviceName());
-    NimBLEDevice::setPower(9);
+    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
 
 #if NIMBLE_ENABLE_2M_PHY && (defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6))
     int mtuResult = NimBLEDevice::setMTU(kPreferredBleMtu);
@@ -836,7 +851,11 @@ void NimbleBluetooth::setup()
         NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
     }
     bleServer = NimBLEDevice::createServer();
-    auto *serverCallbacks = new NimbleBluetoothServerCallback(this);
+#ifdef NIMBLE_TWO
+    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback(this);
+#else
+    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback();
+#endif
     bleServer->setCallbacks(serverCallbacks, true);
     setupService();
     startAdvertising();
@@ -881,7 +900,11 @@ void NimbleBluetooth::setupService()
     NimBLEService *batteryService = bleServer->createService(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
     BatteryCharacteristic = batteryService->createCharacteristic( // 0x2A19 is the Battery Level characteristic)
         (uint16_t)0x2a19, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY, 1);
+#ifdef NIMBLE_TWO
     NimBLE2904 *batteryLevelDescriptor = BatteryCharacteristic->create2904();
+#else
+    NimBLE2904 *batteryLevelDescriptor = (NimBLE2904 *)BatteryCharacteristic->createDescriptor((uint16_t)0x2904);
+#endif
     batteryLevelDescriptor->setFormat(NimBLE2904::FORMAT_UINT8);
     batteryLevelDescriptor->setNamespace(1);
     batteryLevelDescriptor->setUnit(0x27ad);
@@ -889,12 +912,54 @@ void NimbleBluetooth::setupService()
     batteryService->start();
 }
 
+void NimbleBluetooth::startAdvertising()
+{
+#ifdef NIMBLE_TWO
+    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    NimBLEExtAdvertisement legacyAdvertising;
+
+    legacyAdvertising.setLegacyAdvertising(true);
+    legacyAdvertising.setScannable(true);
+    legacyAdvertising.setConnectable(true);
+    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
+    if (powerStatus->getHasBattery() == 1) {
+        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
+    }
+    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
+    legacyAdvertising.setMinInterval(500);
+    legacyAdvertising.setMaxInterval(1000);
+
+    NimBLEExtAdvertisement legacyScanResponse;
+    legacyScanResponse.setLegacyAdvertising(true);
+    legacyScanResponse.setConnectable(true);
+    legacyScanResponse.setName(getDeviceName());
+
+    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
+        LOG_ERROR("BLE failed to set legacyAdvertising");
+    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
+        LOG_ERROR("BLE failed to set legacyScanResponse");
+    } else if (!pAdvertising->start(0, 0, 0)) {
+        LOG_ERROR("BLE failed to start legacyAdvertising");
+    }
+#else
+    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    pAdvertising->reset();
+    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
+    pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
+    pAdvertising->start(0);
+#endif
+}
+
 /// Given a level between 0-100, update the BLE attribute
 void updateBatteryLevel(uint8_t level)
 {
     if ((config.bluetooth.enabled == true) && bleServer && nimbleBluetooth->isConnected()) {
         BatteryCharacteristic->setValue(&level, 1);
+#ifdef NIMBLE_TWO
         BatteryCharacteristic->notify(&level, 1, BLE_HS_CONN_HANDLE_NONE);
+#else
+        BatteryCharacteristic->notify();
+#endif
     }
 }
 
@@ -909,7 +974,11 @@ void NimbleBluetooth::sendLog(const uint8_t *logMessage, size_t length)
     if (!bleServer || !isConnected() || length > 512) {
         return;
     }
+#ifdef NIMBLE_TWO
     logRadioCharacteristic->notify(logMessage, length, BLE_HS_CONN_HANDLE_NONE);
+#else
+    logRadioCharacteristic->notify(logMessage, length, true);
+#endif
 }
 
 void clearNVS()

src/nimble/NimbleBluetooth.h

@@ -12,11 +12,16 @@ class NimbleBluetooth : BluetoothApi
     bool isConnected();
     int getRssi();
     void sendLog(const uint8_t *logMessage, size_t length);
+#if defined(NIMBLE_TWO)
     void startAdvertising();
+#endif
     bool isDeInit = false;
 
   private:
     void setupService();
+#if !defined(NIMBLE_TWO)
+    void startAdvertising();
+#endif
 };
 
 void setBluetoothEnable(bool enable);

src/platform/esp32/BleOta.cpp

@@ -0,0 +1,46 @@
+#include "BleOta.h"
+#include "Arduino.h"
+#include <esp_ota_ops.h>
+
+static const String MESHTASTIC_OTA_APP_PROJECT_NAME("Meshtastic-OTA");
+
+const esp_partition_t *BleOta::findEspOtaAppPartition()
+{
+    const esp_partition_t *part = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_0, nullptr);
+
+    esp_app_desc_t app_desc;
+    esp_err_t ret = ESP_ERROR_CHECK_WITHOUT_ABORT(esp_ota_get_partition_description(part, &app_desc));
+
+    if (ret != ESP_OK || MESHTASTIC_OTA_APP_PROJECT_NAME != app_desc.project_name) {
+        part = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_APP_OTA_1, nullptr);
+        ret = ESP_ERROR_CHECK_WITHOUT_ABORT(esp_ota_get_partition_description(part, &app_desc));
+    }
+
+    if (ret == ESP_OK && MESHTASTIC_OTA_APP_PROJECT_NAME == app_desc.project_name) {
+        return part;
+    } else {
+        return nullptr;
+    }
+}
+
+String BleOta::getOtaAppVersion()
+{
+    const esp_partition_t *part = findEspOtaAppPartition();
+    esp_app_desc_t app_desc;
+    esp_err_t ret = ESP_ERROR_CHECK_WITHOUT_ABORT(esp_ota_get_partition_description(part, &app_desc));
+    String version;
+    if (ret == ESP_OK) {
+        version = app_desc.version;
+    }
+    return version;
+}
+
+bool BleOta::switchToOtaApp()
+{
+    bool success = false;
+    const esp_partition_t *part = findEspOtaAppPartition();
+    if (part) {
+        success = (ESP_ERROR_CHECK_WITHOUT_ABORT(esp_ota_set_boot_partition(part)) == ESP_OK);
+    }
+    return success;
+}

src/platform/esp32/BleOta.h

@@ -0,0 +1,20 @@
+#ifndef BLEOTA_H
+#define BLEOTA_H
+
+#include <Arduino.h>
+#include <functional>
+
+class BleOta
+{
+  public:
+    explicit BleOta(){};
+
+    static String getOtaAppVersion();
+    static bool switchToOtaApp();
+
+  private:
+    String mUserAgent;
+    static const esp_partition_t *findEspOtaAppPartition();
+};
+
+#endif // BLEOTA_H

src/platform/esp32/MeshtasticOTA.h

@@ -1,18 +0,0 @@
-#ifndef MESHTASTICOTA_H
-#define MESHTASTICOTA_H
-
-#include "mesh-pb-constants.h"
-#include <Arduino.h>
-
-namespace MeshtasticOTA
-{
-void initialize();
-bool isUpdated();
-
-void recoverConfig(meshtastic_Config_NetworkConfig *network);
-void saveConfig(meshtastic_Config_NetworkConfig *network, meshtastic_OTAMode method, uint8_t* ota_hash);
-bool trySwitchToOTA();
-const char *getVersion();
-} // namespace MeshtasticOTA
-
-#endif // MESHTASTICOTA_H

src/platform/esp32/WiFiOTA.cpp

@@ -1,13 +1,13 @@
-#include "MeshtasticOTA.h"
+#include "WiFiOTA.h"
 #include "configuration.h"
 #include <Preferences.h>
 #include <esp_ota_ops.h>
 
-namespace MeshtasticOTA
+namespace WiFiOTA
 {
 
-static const char *nvsNamespace = "MeshtasticOTA";
-static const char *appProjectName = "MeshtasticOTA";
+static const char *nvsNamespace = "ota-wifi";
+static const char *appProjectName = "OTA-WiFi";
 
 static bool updated = false;
 
@@ -43,14 +43,12 @@ void recoverConfig(meshtastic_Config_NetworkConfig *network)
     strncpy(network->wifi_psk, psk.c_str(), sizeof(network->wifi_psk));
 }
 
-void saveConfig(meshtastic_Config_NetworkConfig *network, meshtastic_OTAMode method, uint8_t* ota_hash)
+void saveConfig(meshtastic_Config_NetworkConfig *network)
 {
     LOG_INFO("Saving WiFi settings for upcoming OTA update");
 
     Preferences prefs;
     prefs.begin(nvsNamespace);
-    prefs.putUChar("method", method);
-    prefs.putBytes("ota_hash", ota_hash, 32);
     prefs.putString("ssid", network->wifi_ssid);
     prefs.putString("psk", network->wifi_psk);
     prefs.putBool("updated", false);
@@ -64,14 +62,10 @@ const esp_partition_t *getAppPartition()
 
 bool getAppDesc(const esp_partition_t *part, esp_app_desc_t *app_desc)
 {
-    if (esp_ota_get_partition_description(part, app_desc) != ESP_OK) {
-        LOG_INFO("esp_ota_get_partition_description failed");
+    if (esp_ota_get_partition_description(part, app_desc) != ESP_OK)
         return false;
-    }
-    if (strcmp(app_desc->project_name, appProjectName) != 0) {
-        LOG_INFO("app_desc->project_name == 0");
+    if (strcmp(app_desc->project_name, appProjectName) != 0)
         return false;
-    }
     return true;
 }
 
@@ -95,4 +89,4 @@ const char *getVersion()
     return app_desc.version;
 }
 
-} // namespace MeshtasticOTA
+} // namespace WiFiOTA

src/platform/esp32/WiFiOTA.h

@@ -0,0 +1,18 @@
+#ifndef WIFIOTA_H
+#define WIFIOTA_H
+
+#include "mesh-pb-constants.h"
+#include <Arduino.h>
+
+namespace WiFiOTA
+{
+void initialize();
+bool isUpdated();
+
+void recoverConfig(meshtastic_Config_NetworkConfig *network);
+void saveConfig(meshtastic_Config_NetworkConfig *network);
+bool trySwitchToOTA();
+const char *getVersion();
+} // namespace WiFiOTA
+
+#endif // WIFIOTA_H

src/platform/esp32/main-esp32.cpp

@@ -5,10 +5,11 @@
 #include "main.h"
 
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_BLUETOOTH
+#include "BleOta.h"
 #include "nimble/NimbleBluetooth.h"
 #endif
 
-#include <MeshtasticOTA.h>
+#include <WiFiOTA.h>
 
 #if HAS_WIFI
 #include "mesh/wifi/WiFiAPClient.h"
@@ -143,14 +144,22 @@ void esp32Setup()
         preferences.putUInt("hwVendor", HW_VENDOR);
     preferences.end();
     LOG_DEBUG("Number of Device Reboots: %d", rebootCounter);
-#if !MESHTASTIC_EXCLUDE_WIFI
-    String version = MeshtasticOTA::getVersion();
-    if (version.isEmpty()) {
-        LOG_INFO("MeshtasticOTA firmware not available");
+#if !MESHTASTIC_EXCLUDE_BLUETOOTH
+    String BLEOTA = BleOta::getOtaAppVersion();
+    if (BLEOTA.isEmpty()) {
+        LOG_INFO("No BLE OTA firmware available");
     } else {
-        LOG_INFO("MeshtasticOTA firmware version %s", version.c_str());
+        LOG_INFO("BLE OTA firmware version %s", BLEOTA.c_str());
     }
-    MeshtasticOTA::initialize();
+#endif
+#if !MESHTASTIC_EXCLUDE_WIFI
+    String version = WiFiOTA::getVersion();
+    if (version.isEmpty()) {
+        LOG_INFO("No WiFi OTA firmware available");
+    } else {
+        LOG_INFO("WiFi OTA firmware version %s", version.c_str());
+    }
+    WiFiOTA::initialize();
 #endif
 
     // enableModemSleep();

userPrefs.jsonc

@@ -55,7 +55,6 @@
   // "USERPREFS_MQTT_TLS_ENABLED": "false",
   // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
-  // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
   // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
   "USERPREFS_TZ_STRING": "tzplaceholder                                         "

variants/esp32/betafpv_2400_tx_micro/platformio.ini

@@ -15,4 +15,5 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
   ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32/betafpv_900_tx_nano/platformio.ini

@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/chatter2/platformio.ini

@@ -9,4 +9,5 @@ build_flags =
   
 lib_deps =
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

variants/esp32/esp32.ini

@@ -38,7 +38,6 @@ build_flags =
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
-  -DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
@@ -54,17 +53,18 @@ build_flags =
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^2.3.7
+  h2zero/NimBLE-Arduino@1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32/m5stack_core/platformio.ini

@@ -25,4 +25,5 @@ lib_ignore =
   m5stack-core
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

variants/esp32/m5stack_coreink/platformio.ini

@@ -18,8 +18,10 @@ build_flags =
   -DM5STACK
 lib_deps = 
   ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -2,8 +2,6 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1_EXPLORER

variants/esp32/nano-g1/platformio.ini

@@ -2,8 +2,6 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1

variants/esp32/radiomaster_900_bandit/platformio.ini

@@ -13,4 +13,5 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
   ${esp32_base.lib_deps}
+  # renovate: datasource=github-tags depName=STK8xxx-Accelerometer packageName=gjelsoe/STK8xxx-Accelerometer
   https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip

variants/esp32/radiomaster_900_bandit_micro/platformio.ini

@@ -15,5 +15,3 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -10,5 +10,3 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}

variants/esp32/station-g1/platformio.ini

@@ -2,8 +2,6 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D STATION_G1

variants/esp32/tbeam/platformio.ini

@@ -4,7 +4,6 @@ extends = esp32_base
 board = ttgo-t-beam
 board_level = extra
 board_check = true
-lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
   -I variants/esp32/tbeam
@@ -21,5 +20,7 @@ build_flags =
 
 lib_deps =
   ${env:tbeam.lib_deps}
-  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
-  lewisxhe/SensorLib@0.3.1 ; touchscreen addon
+  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
+  https://github.com/meshtastic/st7796/archive/1.0.5.zip
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.1

variants/esp32/wiphone/platformio.ini

@@ -10,6 +10,9 @@ build_flags =
   -I variants/esp32/wiphone
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-  sparkfun/SX1509 IO Expander@^3.0.5
-  pololu/APA102@^3.0.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
+  sparkfun/SX1509 IO Expander@3.0.6
+  # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
+  pololu/APA102@3.0.0

variants/esp32c3/diy/esp32c3_super_mini/platformio.ini

@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/diy/esp32c3_super_mini
   -D ARDUINO_USB_MODE=1

variants/esp32c3/esp32c3.ini

@@ -4,8 +4,3 @@ custom_esp32_kind = esp32c3
 
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
-
-build_flags =
-	${esp32_base.build_flags}
-	-DCONFIG_BT_NIMBLE_EXT_ADV=1
-	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -D ARDUINO_USB_MODE=1
   -D ARDUINO_USB_CDC_ON_BOOT=1

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D HELTEC_HT62
   -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200

variants/esp32c3/heltec_hru_3601/platformio.ini

@@ -2,8 +2,9 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D HELTEC_HRU_3601
   -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32c3/m5stack-stamp-c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -12,8 +12,10 @@ build_unflags =
   -D HAS_WIFI
 lib_deps =
   ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@^1.12.3
-  h2zero/NimBLE-Arduino@^2.3.7
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
   ${esp32c6_base.build_flags}
   -D M5STACK_UNITC6L
@@ -24,6 +26,7 @@ build_flags =
   -D HAS_BLUETOOTH=1
 	-DCONFIG_BT_NIMBLE_EXT_ADV=1
 	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+  -D NIMBLE_TWO
 monitor_speed=115200
 lib_ignore =
   NonBlockingRTTTL

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -16,6 +16,9 @@ build_flags =
   -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
 
 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  maxpromer/PCA9557-arduino @ ^1.0.0
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
+  maxpromer/PCA9557-arduino@1.0.0

variants/esp32s3/bpi_picow_esp32_s3/platformio.ini

@@ -8,9 +8,10 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32_base.lib_deps}
-  caveman99/ESP32 Codec2@^1.0.1
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=caveman99-ESP32_Codec2 packageName=caveman99/library/ESP32 Codec2
+  caveman99/ESP32 Codec2@1.0.1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/bpi_picow_esp32_s3

variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini

@@ -25,6 +25,7 @@ build_flags =
   ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
 
 [env:crowpanel-esp32s3-4-epaper]
@@ -54,6 +55,7 @@ build_flags =
   ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
 
 [env:crowpanel-esp32s3-2-epaper]
@@ -83,4 +85,5 @@ build_flags =
   ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -9,14 +9,16 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_eink
   -Dmy

variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini

@@ -9,13 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_oled
   -DBOARD_HAS_PSRAM

variants/esp32s3/dreamcatcher/platformio.ini

@@ -12,8 +12,10 @@ build_flags =
   -D ARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
 
 [env:dreamcatcher-2206] 
 extends = esp32s3_base

variants/esp32s3/elecrow_panel/platformio.ini

@@ -41,9 +41,13 @@ build_flags = ${esp32s3_base.build_flags} -Os
 
 lib_deps = ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
   earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
   earlephilhower/ESP8266SAM@1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  # renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
   hideakitai/TCA9534@0.1.1
 
 [crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -22,5 +22,7 @@ build_flags = ${esp32s3_base.build_flags}
   -DEINK_HEIGHT=128
 
 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/esp32s3.ini

@@ -3,8 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-
-build_flags =
-	${esp32_base.build_flags}
-	-DCONFIG_BT_NIMBLE_EXT_ADV=1
-	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32s3/hackaday-communicator/platformio.ini

@@ -12,4 +12,5 @@ build_flags = ${esp32s3_base.build_flags}
   -I variants/esp32s3/hackaday-communicator
 
 lib_deps = ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
+  # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip

variants/esp32s3/heltec_sensor_hub/platformio.ini

@@ -9,4 +9,5 @@ build_flags =
   -D HELTEC_SENSOR_HUB
 
 lib_deps = ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/heltec_v4/platformio.ini

@@ -7,8 +7,6 @@ build_flags =
   ${esp32s3_base.build_flags}
   -D HELTEC_V4
   -I variants/esp32s3/heltec_v4
-lib_deps = 
-  ${esp32s3_base.lib_deps}
 
 
 [env:heltec-v4]
@@ -23,8 +21,6 @@ build_flags =
   -D I2C_SCL=18
   -D I2C_SDA1=4
   -D I2C_SCL1=3
-lib_deps = 
-  ${heltec_v4_base.lib_deps}
 
 [env:heltec-v4-tft]
 extends = heltec_v4_base
@@ -107,6 +103,10 @@ build_flags =
 
 lib_deps = ${heltec_v4_base.lib_deps}
   ; ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
   https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
+  ; TODO revert to official device-ui (when merged)
+  # renovate: datasource=git-refs depName=Quency-D_device-ui packageName=https://github.com/Quency-D/device-ui gitBranch=heltec-v4-tft
   https://github.com/Quency-D/device-ui/archive/7c9870b8016641190b059bdd90fe16c1012a39eb.zip

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -17,8 +17,10 @@ build_flags =
   -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e213-inkhud]
@@ -27,7 +29,7 @@ board = heltec_vision_master_e213
 board_level = pr
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =  
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -20,8 +20,10 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e290-inkhud]
@@ -29,7 +31,7 @@ extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
 build_src_filter = 
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags = 
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -8,6 +8,8 @@ build_flags =
   -D HELTEC_VISION_MASTER_T190
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
   https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -18,8 +18,10 @@ build_flags =
   -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
 
 [env:heltec-wireless-paper-inkhud]
@@ -27,7 +29,7 @@ extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -15,6 +15,8 @@ build_flags =
   -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -12,4 +12,5 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -11,4 +11,5 @@ build_flags =
   ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -10,4 +10,5 @@ build_flags =
   -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

variants/esp32s3/icarus/platformio.ini

@@ -7,9 +7,8 @@ board_build.mcu = esp32s3
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
+; TODO renovate or remove
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/link32_s3_v1/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32s3_base
 board = esp32-s3-devkitc-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D LINK_32
   -I variants/esp32s3/link32_s3_v1
   -DARDUINO_USB_CDC_ON_BOOT

variants/esp32s3/m5stack_cores3/platformio.ini

@@ -6,8 +6,7 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -D M5STACK_CORES3
   -I variants/esp32s3/m5stack_cores3
-lib_deps = ${esp32_base.lib_deps}

variants/esp32s3/mesh-tab/platformio.ini

@@ -46,11 +46,12 @@ build_flags = ${esp32s3_base.build_flags}
   -D VIEW_320x240
   -D USE_PACKET_API
   -I variants/esp32s3/mesh-tab
-build_src_filter = ${esp32_base.build_src_filter}
+build_src_filter = ${esp32s3_base.build_src_filter}
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
 
 [mesh_tab_xpt2046]
 extends = mesh_tab_base

variants/esp32s3/nibble_esp32/platformio.ini

@@ -3,6 +3,6 @@ extends = esp32s3_base
 board = esp32-s3-zero
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/nibble_esp32

variants/esp32s3/picomputer-s3/platformio.ini

@@ -15,7 +15,8 @@ build_flags =
 
 lib_deps = 
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}

variants/esp32s3/rak3312/platformio.ini

@@ -6,6 +6,6 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D RAK3312
   -I variants/esp32s3/rak3312

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -8,14 +8,15 @@ upload_protocol = esptool
 board_build.partitions = default_8MB.csv
 
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
   -D RAK3312
   -D RAK_WISMESH_TAP_V2 
   -I variants/esp32s3/rak_wismesh_tap_v2
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
 
 [ft5x06]
 extends = mesh_tab_base

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -9,7 +9,7 @@ board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool
 
-build_flags = ${esp32_base.build_flags}
+build_flags = ${esp32s3_base.build_flags}
   -Ivariants/esp32s3/seeed-sensecap-indicator
   -DSENSECAP_INDICATOR
   -DCONFIG_ARDUHAL_LOG_COLORS
@@ -24,10 +24,12 @@ build_flags = ${esp32_base.build_flags}
   -DUSE_ARDUINO_HAL_GPIO
 
 lib_deps = ${esp32s3_base.lib_deps}
+  ; TODO switch back to official LovyanGFX
   https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
-
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
 
 [env:seeed-sensecap-indicator-tft]
 extends = env:seeed-sensecap-indicator
@@ -64,4 +66,5 @@ build_flags =
 lib_deps =
   ${env:seeed-sensecap-indicator.lib_deps}
   ${device-ui_base.lib_deps}
+  ; TODO switch back to official bb_captouch
   https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -6,8 +6,6 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/station-g2/platformio.ini

@@ -8,8 +8,6 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/t-deck-pro/platformio.ini

@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
   -D T_DECK_PRO
   -D USE_EINK
   -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
@@ -17,7 +17,11 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  https://github.com/ZinggJM/GxEPD2/archive/refs/tags/1.6.4.zip
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.4
+  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
+  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
   https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
+  # renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
   https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip

variants/esp32s3/t-deck/platformio.ini

@@ -12,9 +12,12 @@ build_flags = ${esp32s3_base.build_flags}
   -I variants/esp32s3/t-deck
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
 
 [env:t-deck-tft]
 extends = env:t-deck
@@ -68,4 +71,5 @@ build_flags =
 lib_deps =
   ${env:t-deck.lib_deps}
   ${device-ui_base.lib_deps}
+  # renovate: datasource=github-tags depName=bb_captouch packageName=bitbank2/bb_captouch
   https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip

variants/esp32s3/t-eth-elite/platformio.ini

@@ -15,4 +15,5 @@ lib_ignore =
 
 lib_deps = 
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=github-tags depName=ETHClass2 packageName=meshtastic/ETHClass2
   https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip

variants/esp32s3/t-watch-s3/platformio.ini

@@ -6,16 +6,22 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 
-build_flags = ${esp32_base.build_flags} 
+build_flags = ${esp32s3_base.build_flags}
   -DT_WATCH_S3
   -Ivariants/esp32s3/t-watch-s3
   -DPCF8563_RTC=0x51
   -DHAS_BMA423=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
-  adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
+  adafruit/Adafruit DRV2605 Library@1.2.4
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.2.0

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -7,6 +7,7 @@ board_check = true
 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
 
 build_flags = 

variants/esp32s3/tlora-pager/platformio.ini

@@ -17,14 +17,23 @@ build_flags = ${esp32s3_base.build_flags}
   -D ROTARY_BUXTRONICS
 
 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
   earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
   earlephilhower/ESP8266SAM@1.0.1
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
   adafruit/Adafruit DRV2605 Library@1.2.4
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
   lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.1
-  https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
+  # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
+  https://github.com/pschatzmann/arduino-audio-driver/archive/v0.1.3.zip
+  # TODO renovate
   https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  # TODO renovate
   https://github.com/mverch67/RotaryEncoder/archive/da958a21389cbcd485989705df602a33e092dd88.zip
 
 [env:tlora-pager-tft]

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
   -D TLORA_T3S3_EPAPER
   -I variants/esp32s3/tlora_t3s3_epaper
   -DUSE_EINK
@@ -20,6 +20,7 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
   https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
 
 [env:tlora-t3s3-epaper-inkhud]
@@ -28,7 +29,7 @@ board = tlora-t3s3-v1
 board_check = true
 upload_protocol = esptool
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =
   ${esp32s3_base.build_flags}

variants/esp32s3/tlora_t3s3_v1/platformio.ini

@@ -5,4 +5,6 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/esp32s3/tlora_t3s3_v1
+  ${esp32s3_base.build_flags}
+  -D TLORA_T3S3_V1
+  -I variants/esp32s3/tlora_t3s3_v1

variants/esp32s3/tracksenger/platformio.ini

@@ -12,7 +12,8 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-lcd]
 extends = esp32s3_base
@@ -28,7 +29,8 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-oled]
 extends = esp32s3_base

variants/esp32s3/unphone/platformio.ini

@@ -27,10 +27,12 @@ build_src_filter =
   +<../variants/esp32s3/unphone>
 
 lib_deps = ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@ 1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.0
+  # TODO renovate
   https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
-  adafruit/Adafruit NeoPixel @ ^1.12.0
-
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 
 [env:unphone-tft]
 board_level = extra

variants/native/portduino-buildroot/platformio.ini

@@ -5,5 +5,4 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
 board = buildroot
 board_level = extra
-lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}

variants/native/portduino.ini

@@ -21,12 +21,13 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
   ${radiolib_base.lib_deps}
   ${environmental_base.lib_deps}
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library

variants/native/portduino/platformio.ini

@@ -6,7 +6,8 @@ board = cross_platform
 board_level = extra
 lib_deps = 
   ${portduino_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
+  melopero/Melopero RV3028@1.2.0
 
 build_src_filter = ${portduino_base.build_src_filter}