Merge branch 'master' into crowpanelV2

platformio.ini

@@ -120,7 +120,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/63967a4a557d33d56fc5746f9128200dde2d88c5.zip
+	https://github.com/meshtastic/device-ui/archive/48e3a59ddfd746dfbde562a7f447cf9da4f369cf.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/configuration.h

@@ -274,6 +274,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
+// used for display brightness control
+#define STC8H1K28_ADDR 0x30
+
 // -----------------------------------------------------------------------------
 // Touchscreen
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.h

@@ -63,6 +63,7 @@ class ScanI2C
         NAU7802,
         FT6336U,
         STK8BAXX,
+        STC8H1K28,
         ICM20948,
         SCD4X,
         MAX30102,

src/detect/ScanI2CTwoWire.cpp

@@ -243,6 +243,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 #ifdef HAS_LP5562
                 SCAN_SIMPLE_CASE(LP5562_ADDR, LP5562, "LP5562", (uint8_t)addr.address);
+#else
+                SCAN_SIMPLE_CASE(STC8H1K28_ADDR, LP5562, "STC8H1K28", (uint8_t)addr.address);
 #endif
             case XPOWERS_AXP192_AXP2101_ADDRESS:
                 // Do we have the axp2101/192 or the TCA8418

src/gps/RTC.cpp

@@ -72,13 +72,11 @@ RTCSetResult readFromRTC()
 #elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
 #if defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
-        SensorPCF8563 rtc;
 #elif defined(PCF85063_RTC)
     if (rtc_found.address == PCF85063_RTC) {
-        SensorPCF85063 rtc;
-
 #endif
         uint32_t now = millis();
+        SensorRtcHelper rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
         rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
@@ -242,12 +240,10 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
 #if defined(PCF8563_RTC)
         if (rtc_found.address == PCF8563_RTC) {
-            SensorPCF8563 rtc;
 #elif defined(PCF85063_RTC)
         if (rtc_found.address == PCF85063_RTC) {
-            SensorPCF85063 rtc;
-
 #endif
+            SensorRtcHelper rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
             rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);

src/platform/esp32/main-esp32.cpp

@@ -24,11 +24,6 @@
 #include <nvs.h>
 #include <nvs_flash.h>
 
-// Weak empty variant shutdown prep function.
-// May be redefined by variant files.
-void variant_shutdown() __attribute__((weak));
-void variant_shutdown() {}
-
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_BLUETOOTH
 void setBluetoothEnable(bool enable)
 {
@@ -254,7 +249,6 @@ void cpuDeepSleep(uint32_t msecToWake)
 
 #endif // #end ESP32S3_WAKE_TYPE
 #endif
-    variant_shutdown();
 
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);

src/platform/nrf52/main-nrf52.cpp

@@ -46,7 +46,7 @@
 
 uint16_t getVDDVoltage();
 
-// Weak empty variant shutdown prep function.
+// Weak empty variant initialization function.
 // May be redefined by variant files.
 void variant_shutdown() __attribute__((weak));
 void variant_shutdown() {}

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -34,5 +34,3 @@ lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
   maxpromer/PCA9557-arduino@1.0.0
-  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.4

variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp

@@ -1,17 +1,12 @@
 #include "variant.h"
 #include <PCA9557.h>
 
-PCA9557 io(0x18, &Wire1);
+PCA9557 io(0x18, &Wire);
 
 void earlyInitVariant()
 {
-    Wire1.begin(48, 47);
+    Wire.begin(48, 47);
     io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
     io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
     io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
 }
-
-void variant_shutdown()
-{
-    io.digitalWrite(PCA_PIN_POWER_EN, LOW);
-}

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -30,9 +30,6 @@
 #define I2C_SCL 1
 #define I2C_SDA 2
 
-// PCF8563 RTC Module
-#define PCF8563_RTC 0x51
-
 // GPS pins
 #define GPS_SWITH 10
 #define HAS_GPS 1

variants/esp32s3/elecrow_panel/platformio.ini

@@ -164,3 +164,6 @@ build_flags =
   ${crowpanel_large_esp32s3_base.build_flags}
   -D VIEW_320x240
   -D DISPLAY_SIZE=800x480 ; landscape mode
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/elecrow_panel>

variants/esp32s3/elecrow_panel/variant.cpp

@@ -0,0 +1,21 @@
+// meshtastic/firmware/variants/elecrow_panel/variant.cpp
+
+#include "variant.h"
+#include "Arduino.h"
+#include "Wire.h"
+
+bool elecrow_v2 = false; // false = v1, true = v2
+
+extern "C" {
+
+void initVariant()
+{
+    Wire.begin(I2C_SDA, I2C_SCL, 100000);
+    delay(50);
+    Wire.beginTransmission(0x30);
+    if (Wire.endTransmission() == 0) {
+        elecrow_v2 = true;
+    }
+    Wire.end();
+}
+}

variants/esp32s3/elecrow_panel/variant.h

@@ -1,6 +1,8 @@
 #define I2C_SDA 15
 #define I2C_SCL 16
 
+extern bool elecrow_v2; // false = v1, true = v2
+
 #if CROW_SELECT == 1
 #define WAKE_ON_TOUCH
 #define SCREEN_TOUCH_INT 47
@@ -17,7 +19,7 @@
 #define DAC_I2S_DOUT 12
 #define DAC_I2S_MCLK 8 // don't use GPIO0 because it's assigned to LoRa or button
 #else
-#define PIN_BUZZER 8
+#define PIN_BUZZER (elecrow_v2 ? 0 : 8)
 #endif
 
 // GPS via UART1 connector
@@ -72,7 +74,7 @@
 #define SENSOR_POWER_ON LOW
 #else
 // 4.3", 5.0", 7.0"
-#define LORA_CS 0
+#define LORA_CS (elecrow_v2 ? 8 : 0)
 #define LORA_SCK 5
 #define LORA_MISO 4
 #define LORA_MOSI 6

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -24,5 +24,5 @@ lib_deps =
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
-  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M3/variant.h

@@ -116,6 +116,7 @@ extern "C" {
 
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
+#define HAS_RTC 1
 
 #ifdef __cplusplus
 }

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -21,5 +21,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
 lib_deps =
   ${nrf52840_base.lib_deps}
-  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/variant.h

@@ -121,6 +121,7 @@ static const uint8_t A0 = PIN_A0;
 
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
+#define HAS_RTC 1
 
 // SPI
 #define SPI_INTERFACES_COUNT 1

variants/nrf52840/t-echo-plus/variant.h

@@ -132,6 +132,9 @@ static const uint8_t A0 = PIN_A0;
 
 #define HAS_DRV2605 1
 
+// Battery / ADC already defined above
+#define HAS_RTC 1
+
 #define SERIAL_PRINT_PORT 0
 
 #ifdef __cplusplus