Remove YardSale channel

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_esp32.yml

@@ -0,0 +1,40 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware.bin
+          ota_firmware_target: release/bleota.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C6
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-S3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-s3.bin
+          ota_firmware_target: release/bleota-s3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_firmware.yml

@@ -1,66 +0,0 @@
-name: Build
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      platform:
-        required: true
-        type: string
-      pio_env:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  pio-build:
-    name: build-${{ inputs.platform }}
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Set OTA firmware source and target
-        if: startsWith(inputs.platform, 'esp32')
-        id: ota_dir
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
-            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
-            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32" ]; then
-            echo "src=firmware.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Build ${{ inputs.platform }}
-        id: build
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ inputs.platform }}
-          pio_env: ${{ inputs.pio_env }}
-          pio_target: build
-          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
-          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
-          overwrite: true
-          path: |
-            release/*.bin
-            release/*.elf
-            release/*.uf2
-            release/*.hex
-            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -0,0 +1,40 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build NRF52
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: nrf52
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,38 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: rp2xx0
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/build_stm32.yml

@@ -0,0 +1,39 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build STM32WL
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: stm32wl
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.bin
+            release/*.elf

.github/workflows/daily_packaging.yml

@@ -30,11 +30,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04
-          - noble # 24.04
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, oracular, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -30,31 +30,18 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
-    runs-on: ubuntu-24.04
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+    runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -65,25 +52,9 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
   check:
     needs: setup
     strategy:
@@ -93,7 +64,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -101,92 +72,67 @@ jobs:
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
+      board: ${{ matrix.board }}
 
-  build-esp32s3:
-    needs: [setup, version]
+  build-esp32-s3:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
+      board: ${{ matrix.board }}
 
-  build-esp32c3:
-    needs: [setup, version]
+  build-esp32-c3:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
+      board: ${{ matrix.board }}
 
-  build-esp32c6:
-    needs: [setup, version]
+  build-esp32-c6:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c6.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
+      board: ${{ matrix.board }}
 
-  build-nrf52840:
-    needs: [setup, version]
+  build-nrf52:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_nrf52.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
+      board: ${{ matrix.board }}
 
-  build-rp2040:
-    needs: [setup, version]
+  build-rpi2040:
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_rpi2040.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
+      board: ${{ matrix.board }}
 
   build-stm32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_stm32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      board: ${{ matrix.board }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -264,36 +210,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
-        version,
         build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-esp32-c6,
+        build-nrf52,
+        build-rpi2040,
         build-stm32,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -302,13 +238,17 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -322,9 +262,9 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -338,12 +278,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -351,8 +291,8 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
@@ -361,49 +301,56 @@ jobs:
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
+          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
+          tag_name: v${{ steps.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -413,8 +360,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -422,30 +369,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
+    needs: [release-artifacts]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -458,16 +401,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -477,30 +420,33 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
     runs-on: ubuntu-24.04
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
+    needs: [release-firmware]
     env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
         uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -514,9 +460,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
+          commit_message: ${{ steps.version.outputs.long }}
           enable_jekyll: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -1,24 +0,0 @@
-name: Check PR Labels
-
-on:
-  pull_request:
-    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
-
-permissions:
-  pull-requests: read
-  contents: read
-
-jobs:
-  check-label:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Check for PR labels
-        uses: actions/github-script@v7
-        with:
-          script: |
-            const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
-            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
-            if (!hasRequiredLabel) {
-              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
-            }

.github/workflows/pr_tests.yml

@@ -1,238 +0,0 @@
-name: Tests
-
-# DISABLED: Changed from automatic PR triggers to manual only
-on:
-  workflow_dispatch:
-    inputs:
-      reason:
-        description: "Reason for manual test run"
-        required: false
-        default: "Manual test execution"
-
-concurrency:
-  group: tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-  pull-requests: write
-
-jobs:
-  native-tests:
-    name: "🧪 Native Tests"
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/test_native.yml
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-
-  test-summary:
-    name: "📊 Test Results"
-    runs-on: ubuntu-latest
-    needs: [native-tests]
-    if: always()
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-      pull-requests: write
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Parse test results and create detailed summary
-        id: test-results
-        run: |
-          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Check overall job status first
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
-            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
-            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          else
-            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Parse detailed test results if available
-          if [ -f "testreport.xml" ]; then
-            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            
-            python3 << 'EOF'
-          import xml.etree.ElementTree as ET
-          import os
-
-          try:
-              tree = ET.parse('testreport.xml')
-              root = tree.getroot()
-              
-              total_tests = 0
-              passed_tests = 0
-              failed_tests = 0
-              skipped_tests = 0
-              
-              # Parse testsuite elements
-              for testsuite in root.findall('.//testsuite'):
-                  suite_name = testsuite.get('name', 'Unknown')
-                  suite_tests = int(testsuite.get('tests', '0'))
-                  suite_failures = int(testsuite.get('failures', '0'))
-                  suite_errors = int(testsuite.get('errors', '0'))
-                  suite_skipped = int(testsuite.get('skipped', '0'))
-                  
-                  total_tests += suite_tests
-                  failed_tests += suite_failures + suite_errors
-                  skipped_tests += suite_skipped
-                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
-                  
-                  if suite_tests > 0:
-                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
-                      print(f"**{status} Test Suite: {suite_name}**")
-                      print(f"- Total: {suite_tests}")
-                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
-                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
-                      if suite_skipped > 0:
-                          print(f"- Skipped: ⏭️ {suite_skipped}")
-                      print("")
-                      
-                      # Show individual test results for failed suites
-                      if suite_failures + suite_errors > 0:
-                          print("**Failed Tests:**")
-                          for testcase in testsuite.findall('testcase'):
-                              test_name = testcase.get('name', 'Unknown')
-                              failure = testcase.find('failure')
-                              error = testcase.find('error')
-                              
-                              if failure is not None:
-                                  msg = failure.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: {msg}")
-                              elif error is not None:
-                                  msg = error.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
-                          print("")
-                      else:
-                          # Show passed tests for successful suites
-                          passed_count = 0
-                          for testcase in testsuite.findall('testcase'):
-                              if testcase.find('failure') is None and testcase.find('error') is None:
-                                  if passed_count < 5:  # Limit to first 5 to avoid spam
-                                      test_name = testcase.get('name', 'Unknown')
-                                      print(f"- ✅ `{test_name}`: PASSED")
-                                  passed_count += 1
-                          if passed_count > 5:
-                              print(f"- ... and {passed_count - 5} more tests passed")
-                          print("")
-              
-              # Summary statistics
-              print("### 📊 Test Statistics")
-              print(f"- **Total Tests**: {total_tests}")
-              print(f"- **Passed**: ✅ {passed_tests}")
-              print(f"- **Failed**: ❌ {failed_tests}")
-              if skipped_tests > 0:
-                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
-              
-              if failed_tests > 0:
-                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
-              else:
-                  print(f"\n✅ **All {total_tests} tests passed!**")
-                  
-          except Exception as e:
-              print(f"❌ Error parsing test results: {e}")
-          EOF
-          else
-            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "---" >> $GITHUB_STEP_SUMMARY
-          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
-
-      - name: Comment test results on PR
-        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v7
-        with:
-          script: |
-            const fs = require('fs');
-
-            // Read the step summary to use as PR comment
-            let testSummary = "## 🧪 Test Results Summary\n\n";
-
-            if ("${{ needs.native-tests.result }}" === "success") {
-              testSummary += "✅ **All tests passed!**\n\n";
-            } else if ("${{ needs.native-tests.result }}" === "failure") {
-              testSummary += "❌ **Some tests failed.**\n\n";
-            } else {
-              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
-            }
-
-            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
-            testSummary += "---\n";
-            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
-
-            // Find existing comment
-            const comments = await github.rest.issues.listComments({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-
-            const botComment = comments.data.find(comment => 
-              comment.user.type === 'Bot' && 
-              comment.body.includes('🧪 Test Results Summary')
-            );
-
-            if (botComment) {
-              // Update existing comment
-              await github.rest.issues.updateComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                comment_id: botComment.id,
-                body: testSummary
-              });
-            } else {
-              // Create new comment
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: context.issue.number,
-                body: testSummary
-              });
-            }
-
-      - name: Set overall status
-        run: |
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "All tests passed! ✅"
-            exit 0
-          else
-            echo "Some tests failed! ❌"
-            exit 1
-          fi

.github/workflows/release_channels.yml

@@ -20,11 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04
-          - noble # 24.04
-          - plucky # 25.04
-          # - questing # 25.10
+        series: [plucky, oracular, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -60,7 +56,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
         uses: actions/setup-python@v5
@@ -103,9 +99,8 @@ jobs:
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version
-          labels: github_actions
           title: Bump release version
-          commit-message: Automated version bumps
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.1.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -34,9 +34,7 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
-          labels: submodules
           title: Update protobufs and classes
-          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.trunk/trunk.yaml

@@ -1,22 +1,22 @@
 version: 0.1
 cli:
-  version: 1.25.0
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.2
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.467
-    - renovate@41.88.0
+    - checkov@3.2.447
+    - renovate@41.23.4
     - prettier@3.6.2
-    - trufflehog@3.90.5
+    - trufflehog@3.89.2
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.65.0
-    - taplo@0.10.0
-    - ruff@0.12.10
+    - trivy@0.64.1
+    - taplo@0.9.3
+    - ruff@0.12.2
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
@@ -25,10 +25,10 @@ lint:
     - flake8@7.3.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
-    - shellcheck@0.11.0
+    - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.13-bookworm AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:trixie-slim
+FROM debian:bookworm-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7t64 libssl3t64 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

arch/esp32/esp32.ini

@@ -54,8 +54,8 @@ lib_deps =
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/37d986499ce24511952d7146db72d667c6bdaff7.zip
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,6 +17,7 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -29,17 +30,14 @@ lib_deps =
   lovyan03/LovyanGFX@^1.2.0
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
-  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
-	adafruit/Adafruit seesaw Library@1.7.9
 
 build_flags =
   ${arduino_base.build_flags}
-  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST=1
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
@@ -50,7 +48,4 @@ build_flags =
   -std=gnu17
   -std=c++17
 
-lib_ignore =
-  Adafruit NeoPixel
-  Adafruit ST7735 and ST7789 Library
-  SD
+lib_ignore = Adafruit NeoPixel

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -23,20 +23,14 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
-  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
-  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -53,4 +47,4 @@ lib_deps =
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  OneButton
+  mathertel/OneButton@2.6.1

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-firmware.sh

@@ -11,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rp2xx0.sh $1
+  bin/build-rpi2040.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/build-native.sh

@@ -25,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg install --environment "$PIO_ENV" || platformioFailed
+pio pkg update --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
 cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-rp2xx0.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32wl.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/config-dist.yaml

@@ -199,10 +199,6 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
 
 
-Config:
-#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
-#  DisplayMode: COLOR # uncomment to force MUI
-
 General:
   MaxNodes: 200
   MaxMessageQueue: 100

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,8 +0,0 @@
-Lora:
-  ### RAK13300in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  spidev: spidev0.1
-  # CS: 7

bin/config.d/lora-RAK6421.yaml

@@ -9,4 +9,13 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml

@@ -1,52 +0,0 @@
-# https://www.waveshare.com/pico-lora-sx1262-868m.htm
-# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
-#
-# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
-#
-# Pin Connection
-# Waveshare       Orange Pi Zero3
-#   36    3.3V        17
-#   15    MOSI        19
-#   16    MISO        21  
-#   14    CLK         23
-#   38    GND         25
-#   4     BUSY        18
-#   20    RESET       22
-#   5     CS          24
-#   26    DIO1/IRQ    26
-
-Lora:
-  Module: sx1262  # Waveshare Raspberry Pico Lora module
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  # Specify either the spidev1_1 or the CS below, not both!
-  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
-  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
-#  CS:             # CS     PIN_24 -> chip 1, line 233
-#    pin: 24
-#    gpiochip: 1
-#    line: 233
-  SCK:            # SCK     PIN_23 -> chip 1, line 230
-    pin: 23
-    gpiochip: 1
-    line: 230
-  Busy:           # BUSY    PIN_18 -> chip 1, line 78
-    pin: 18
-    gpiochip: 1
-    line: 78
-  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
-    pin: 19
-    gpiochip: 1
-    line: 231
-  MISO:           # MISO    PIN_21 -> chip 1, line 232
-    pin: 21
-    gpiochip: 1
-    line: 232
-  Reset:          # NRST    PIN_22 -> chip 1, line 71
-    pin: 22
-    gpiochip: 1
-    line: 71
-  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
-    pin: 26
-    gpiochip: 1
-    line: 74

bin/device-update.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
@@ -31,16 +31,17 @@ EOF
 }
 
 # Check for --change-mode and remove it from arguments
-NEW_ARGS=()
+NEW_ARGS=""
 for arg in "$@"; do
     if [ "$arg" = "--change-mode" ]; then
         CHANGE_MODE=true
     else
-        NEW_ARGS+=("$arg")
+        NEW_ARGS="$NEW_ARGS \"\$arg\""
     fi
 done
 
-set -- "${NEW_ARGS[@]}"
+# Reset positional parameters to filtered list
+eval set -- $NEW_ARGS
 
 while getopts ":hp:P:f:" opt; do
     case "${opt}" in

bin/generate_ci_matrix.py

@@ -2,71 +2,50 @@
 
 """Generate the CI matrix."""
 
+import configparser
 import json
+import os
 import sys
 import random
-import re
-from platformio.project.config import ProjectConfig
+
+rootdir = "variants/"
 
 options = sys.argv[1:]
 
 outlist = []
 
 if len(options) < 1:
-  print(json.dumps(outlist))
-  exit(1)
+    print(json.dumps(outlist))
+    exit()
 
-cfg = ProjectConfig.get_instance()
-pio_envs = cfg.envs()
-
-# Gather all PlatformIO environments for filtering later
-all_envs = []
-for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
-  env_platform = None
-  for flag in env_build_flags:
-    # Extract the platform from the build flags
-    # Example flag: -I variants/esp32s3/heltec-v3
-    match = re.search(r"-I\s?variants/([^/]+)", flag)
-    if match:
-      env_platform = match.group(1)
-      break
-  # Intentionally fail if platform cannot be determined
-  if not env_platform:
-    print(f"Error: Could not determine platform for environment '{pio_env}'")
-    exit(1)
-  # Store env details as a dictionary, and add to 'all_envs' list
-  env = {
-    'name': pio_env,
-    'platform': env_platform,
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
-  }
-  all_envs.append(env)
-
-# Filter outputs based on options
-# Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
-  for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
-      else:
-        outlist.append(env['name'])
-# Filter (non-check) builds by platform
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+                        # Add the TFT variants if the base variant is selected
+                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
+if ("quick" in options) & (len(outlist) > 3):
+    print(json.dumps(random.sample(outlist, 3)))
 else:
-  for env in all_envs:
-    if options[0] == env['platform']:
-      # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
-      # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
-      # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
-
-# Return as a JSON list
-print(json.dumps(outlist))
+    print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,21 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.7" date="2025-08-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
-    </release>
-    <release version="2.7.6" date="2025-08-12">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
-    </release>
-    <release version="2.7.5" date="2025-08-09">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
-    </release>
-    <release version="2.7.4" date="2025-07-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
-    </release>
-    <release version="2.7.3" date="2025-07-10">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
-    </release>
     <release version="2.7.2" date="2025-07-04">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
     </release>

bin/platformio-custom.py

@@ -3,7 +3,6 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import subprocess
 import json
 import re
 
@@ -93,17 +92,6 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
-# get repository owner if git is installed
-try:
-    r_owner = (
-        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
-        .decode("utf-8")
-        .strip().split("/")
-    )
-    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
-except subprocess.CalledProcessError:
-    repo_owner = "unknown"
-
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -129,7 +117,6 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")

boards/heltec_mesh_solar.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x0071"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_solar",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshsolar/",
-  "vendor": "Heltec"
-}

boards/meshtiny.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MeshTiny",
-    "mcu": "nrf52840",
-    "variant": "meshtiny",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "MeshTiny",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://github.com/meshtastic/firmware",
-  "vendor": "MTools Tec"
-}

boards/t-deck-pro.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_qspi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://lilygo.cc/products/t-deck-pro",
-  "vendor": "LilyGo"
-}

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.2.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -28,17 +28,4 @@ meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
-  [ Ubuntu ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
-
- -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000
+ --  <github-actions[bot]@users.noreply.github.com>  Fri, 04 Jul 2025 11:58:01 +0000

debian/meshtasticd.postinst

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postinst script for meshtasticd
 #
 # see: dh_installdeb(1)

debian/meshtasticd.postrm

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postrm script for meshtasticd
 #
 # see: dh_installdeb(1)

platformio.ini

@@ -6,8 +6,7 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/*/platformio.ini
-	variants/*/diy/*/platformio.ini
+	variants/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -60,9 +59,9 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/9573abb64dc9c94f3051348f2bf4fc5cedf03c22.zip
-	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
-	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	mathertel/OneButton@2.6.1
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -102,29 +101,21 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.2.1
+	jgromes/RadioLib@7.2.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/a3e0e1be372d069f47b4c19d718f5267251744d7.zip
+	https://github.com/meshtastic/device-ui/archive/8c7092c73425adfda1aac8c6960df06cd85f6d92.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.2
+	adafruit/Adafruit BusIO@1.17.1
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -138,7 +129,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.3
+	adafruit/Adafruit INA260 Library@1.5.2
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
@@ -186,7 +177,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
+	adafruit/Adafruit SHTC3 Library@1.0.1
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

src/BluetoothStatus.h

@@ -89,22 +89,14 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, LOW);
-#else
                 digitalWrite(BLE_LED, HIGH);
-#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, HIGH);
-#else
                 digitalWrite(BLE_LED, LOW);
-#endif
 #endif
                 break;
             }

src/Power.cpp

@@ -20,11 +20,6 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
-#if defined(ARCH_PORTDUINO)
-#include "api/WiFiServerAPI.h"
-#include "input/LinuxInputImpl.h"
-#endif
-
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -125,15 +120,6 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
-#ifdef HAS_PPM
-// note: XPOWERS_CHIP_XXX must be defined in variant.h
-#include <XPowersLib.h>
-#endif
-
-#ifdef HAS_BQ27220
-#include "bq27220.h"
-#endif
-
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -679,10 +665,6 @@ bool Power::setup()
         found = true;
     } else if (lipoInit()) {
         found = true;
-    } else if (lipoChargerInit()) {
-        found = true;
-    }  else if (meshSolarInit()) {
-        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -697,61 +679,9 @@ bool Power::setup()
     return found;
 }
 
-void Power::powerCommandsCheck()
-{
-    if (rebootAtMsec && millis() > rebootAtMsec) {
-        LOG_INFO("Rebooting");
-        reboot();
-    }
-
-    if (shutdownAtMsec && millis() > shutdownAtMsec) {
-        shutdownAtMsec = 0;
-        shutdown();
-    }
-}
-
-void Power::reboot()
-{
-    notifyReboot.notifyObservers(NULL);
-#if defined(ARCH_ESP32)
-    ESP.restart();
-#elif defined(ARCH_NRF52)
-    NVIC_SystemReset();
-#elif defined(ARCH_RP2040)
-    rp2040.reboot();
-#elif defined(ARCH_PORTDUINO)
-    deInitApiServer();
-    if (aLinuxInputImpl)
-        aLinuxInputImpl->deInit();
-    SPI.end();
-    Wire.end();
-    Serial1.end();
-    if (screen) {
-        delete screen;
-        screen = nullptr;
-    }
-    LOG_DEBUG("final reboot!");
-    ::reboot();
-#elif defined(ARCH_STM32WL)
-    HAL_NVIC_SystemReset();
-#else
-    rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
-#endif
-}
-
 void Power::shutdown()
 {
-
-#if HAS_SCREEN
-    if (screen) {
-        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-    }
-#endif
-#if !defined(ARCH_STM32WL)
-    playShutdownMelody();
-#endif
-    nodeDB->saveToDisk();
+    LOG_INFO("Shutting Down");
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -763,11 +693,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
-#elif defined(ARCH_PORTDUINO)
-    exit(EXIT_SUCCESS);
-#else
-    LOG_WARN("FIXME implement shutdown for this platform");
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 
@@ -1311,216 +1237,3 @@ bool Power::lipoInit()
     return false;
 }
 #endif
-
-#if defined(HAS_PPM) && HAS_PPM
-
-/**
- * Adapter class for BQ25896/BQ27220 Lipo battery charger.
- */
-class LipoCharger : public HasBatteryLevel
-{
-  private:
-    XPowersPPM *ppm = nullptr;
-    BQ27220 *bq = nullptr;
-
-  public:
-    /**
-     * Init the I2C BQ25896 Lipo battery charger
-     */
-    bool runOnce()
-    {
-        if (ppm == nullptr) {
-            ppm = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
-            if (result) {
-                LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
-
-                // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
-
-                // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
-
-                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
-
-                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
-
-                // The premise is that limit pin is disabled, or it will
-                // only follow the maximum charging current set by limit pin.
-                // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
-
-                // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
-
-                // Turn on charging function
-                // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
-            } else {
-                LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
-                ppm = nullptr;
-                return false;
-            }
-        }
-        if (bq == nullptr) {
-            bq = new BQ27220;
-            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
-
-            bool result = bq->init();
-            if (result) {
-                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
-                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
-                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
-                return true;
-            } else {
-                LOG_WARN("BQ27220 init failed");
-                delete bq;
-                bq = nullptr;
-                return false;
-            }
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override
-    {
-        return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
-    }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override
-    {
-        bool isCharging = ppm->isCharging();
-        if (isCharging) {
-            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
-        } else {
-            if (!ppm->isVbusIn()) {
-                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
-            }
-        }
-        return isCharging;
-    }
-};
-
-LipoCharger lipoCharger;
-
-/**
- * Init the Lipo battery charger
- */
-bool Power::lipoChargerInit()
-{
-    bool result = lipoCharger.runOnce();
-    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoCharger;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoChargerInit()
-{
-    return false;
-}
-#endif
-
-
-
-#ifdef HELTEC_MESH_SOLAR
-#include "meshSolarApp.h"
-
-/**
- * meshSolar class for an SMBUS battery sensor.
- */
-class meshSolarBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        meshSolarStart();
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn();}
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return meshSolarIsCharging(); }
-};
-
-meshSolarBatteryLevel meshSolarLevel;
-
-/**
- * Init the meshSolar battery level sensor
- */
-bool Power::meshSolarInit()
-{
-    bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &meshSolarLevel;
-    return true;
-}
-
-#else
-/**
- * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::meshSolarInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    shutdownAtMsec = millis();
+    power->shutdown();
 }
 
 #include "error.h"

src/SerialConsole.cpp

@@ -64,14 +64,6 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-#ifdef HELTEC_MESH_SOLAR
-    //After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
-        && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
-    {
-        return 250;
-    }
-#endif
     return runOncePart();
 }
 

src/buzz/BuzzerFeedbackThread.cpp

@@ -47,6 +47,10 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         playComboTune(); // Ping sent feedback
         break;
 
+    case INPUT_BROKER_SHUTDOWN:
+        playShutdownMelody(); // Shutdown feedback
+        break;
+
     default:
         // For other events, check if it's a printable character
         if (event->kbchar >= 32 && event->kbchar <= 126) {
@@ -65,7 +69,10 @@ int32_t BuzzerFeedbackThread::runOnce()
     // This thread is primarily event-driven, but we can use runOnce
     // for any periodic tasks if needed in the future
 
-    needsUpdate = false;
+    if (needsUpdate) {
+        needsUpdate = false;
+        // Could add any periodic processing here
+    }
 
     // Run every 100ms when active, less frequently when idle
     return needsUpdate ? 100 : 1000;

src/buzz/buzz.cpp

@@ -140,10 +140,6 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
-
-    if (leadUpNoteIndex >= leadUpNotesCount) {
-        return false; // this was the final note
-    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/configuration.h

@@ -135,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(SEEED_WIO_TRACKER_L1)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else
@@ -150,12 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
-#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -194,11 +193,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
 #define PCT2075_ADDR 0x37
-#define BQ27220_ADDR 0x55 // same address as TDECK_KB
-#define BQ25896_ADDR 0x6B
-#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -212,7 +208,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
-#define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 
 // -----------------------------------------------------------------------------
@@ -235,7 +230,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)

src/detect/ScanI2C.h

@@ -74,13 +74,7 @@ class ScanI2C
         RAK12035,
         TCA8418KB,
         PCT2075,
-        CST328,
-        BQ25896,
-        BQ27220,
-        LTR553ALS,
-        BHI260AP,
         BMM150,
-        DRV2605
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -184,13 +184,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                // Update RTC EEPROM settings, if necessary
-                if (rtc.readEEPROMRegister(0x35) != 0x07) {
-                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
-                }
-                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
-                    rtc.writeEEPROMRegister(0x37, 0xB4);
-                }
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
                 break;
 #endif
 
@@ -211,17 +206,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-            case TDECK_KB_ADDR:
-                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
-                if (registerValue != 0) {
-                    logFoundDevice("BQ27220", (uint8_t)addr.address);
-                    type = BQ27220;
-                } else {
-                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
-                    type = TDECKKB;
-                }
-                break;
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -411,12 +396,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
-                if ((registerValue & 0b00000011) == 0b00000010) {
-                    type = BQ25896;
-                    logFoundDevice("BQ25896", (uint8_t)addr.address);
-                    break;
-                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -468,9 +447,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
@@ -483,14 +459,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
-                    if (registerValue == 0xe0) {
-                        type = DRV2605;
-                        logFoundDevice("DRV2605", (uint8_t)addr.address);
-                    } else {
-                        type = MPR121KB;
-                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                    }
+                    type = MPR121KB;
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
                 }
                 break;
 

src/gps/GPS.cpp

@@ -39,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
+#if defined(RAK2560)
+HardwareSerial *GPS::_serial_gps = &Serial2;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif
@@ -643,16 +643,8 @@ bool GPS::setup()
             delay(250);
         } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352)) {
 
-            if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_IN ||
-                config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_NP_865) {
-                _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    0       1      0   0    1
-            } else {
-                _serial_gps->write("$PAIR066,1,1,1,1,0,0*3A\r\n"); // Enable GPS+GLONASS+GALILEO+BDS
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    1       1      1   0    0
-            }
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
+
             // Configure NMEA (sentences will output once per fix)
             _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
             _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
@@ -1504,14 +1496,14 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've set a new time
+ * @return true if we've acquired a new location
  */
 bool GPS::lookForTime()
 {
 
 #ifdef GNSS_AIROHA
     uint8_t fix = reader.fixQuality();
-    if (fix >= 1 && fix <= 5) {
+    if (fix > 0) {
         if (lastFixStartMsec > 0) {
             if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                 return false;
@@ -1544,12 +1536,11 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         if (t.tm_mon > -1) {
             LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
                       t.tm_sec, ti.age());
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
-                LOG_DEBUG("Time set.");
-                return true;
-            } else {
-                return false;
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
+                // Clear the GPS buffer if we got an invalid time
+                clearBuffer();
             }
+            return true;
         } else
             return false;
     } else
@@ -1567,7 +1558,7 @@ bool GPS::lookForLocation()
 #ifdef GNSS_AIROHA
     if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
         uint8_t fix = reader.fixQuality();
-        if (fix >= 1 && fix <= 5) {
+        if (fix > 0) {
             if (lastFixStartMsec > 0) {
                 if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                     return false;

src/gps/RTC.cpp

@@ -23,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-RTCSetResult readFromRTC()
+void readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -44,15 +44,8 @@ RTCSetResult readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
@@ -60,7 +53,6 @@ RTCSetResult readFromRTC()
         if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -83,15 +75,8 @@ RTCSetResult readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
@@ -99,7 +84,6 @@ RTCSetResult readFromRTC()
         if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -108,10 +92,8 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
-        return RTCSetResultSuccess;
     }
 #endif
-    return RTCSetResultNotSet;
 }
 
 /**
@@ -119,7 +101,7 @@ RTCSetResult readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return RTCSetResult
+ * @return True if the RTC was set, false otherwise.
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
@@ -244,14 +226,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
-    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-#ifdef BUILD_EPOCH
-    if (tv.tv_sec < BUILD_EPOCH) {
-        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-        return RTCSetResultInvalidTime;
-    }
-#endif
+    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {

src/gps/RTC.h

@@ -48,7 +48,7 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-RTCSetResult readFromRTC();
+void readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 

src/graphics/EInkDisplay2.cpp

@@ -33,7 +33,6 @@
 */
 
 // Constructor
-
 EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     // Set dimensions in OLEDDisplay base class
@@ -68,28 +67,20 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
-    // HACK for L1 EInk
-#if defined(SEEED_WIO_TRACKER_L1_EINK)
-    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
-    for (uint32_t y = 0; y < displayHeight; y++) {
-        for (uint32_t x = 0; x < displayWidth; x++) {
-            auto b = buffer[x + (y / 8) * displayWidth];
-            auto isset = b & (1 << (y & 7));
-            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
-        }
-    }
-#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
+            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
-#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -149,32 +140,17 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#ifdef ELECROW_ThinkNode_M1
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
 #endif
-        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
-    }
-#elif defined(ELECROW_ThinkNode_M5)
-    {
-        // Start HSPI
-        hspi = new SPIClass(HSPI);
-        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-        adafruitDisplay->init();
-
-        adafruitDisplay->setRotation(4);
-
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -230,13 +206,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(LORA_TYPE)
-    auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-    adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-    adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
-    adafruitDisplay->setRotation(3);
-    adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
-#elif defined(M5_COREINK) || defined(T_DECK_PRO)
+#elif defined(M5_COREINK)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
@@ -250,7 +220,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#elif defined(HELTEC_MESH_POCKET)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -264,7 +234,6 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 

src/graphics/EInkDisplay2.h

@@ -80,11 +80,11 @@ class EInkDisplay : public OLEDDisplay
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
     defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(HELTEC_MESH_POCKET)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/Screen.cpp

@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
 #include "Screen.h"
-#include "NodeDB.h"
 #include "PowerMon.h"
 #include "Throttle.h"
 #include "configuration.h"
@@ -45,6 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #include "FSCommon.h"
 #include "MeshService.h"
+#include "NodeDB.h"
 #include "RadioLibInterface.h"
 #include "error.h"
 #include "gps/GeoCoord.h"
@@ -171,7 +171,7 @@ void Screen::showOverlayBanner(BannerOverlayOptions banner_overlay_options)
 }
 
 // Called to trigger a banner with custom message and duration
-void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback)
+void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback)
 {
 #ifdef USE_EINK
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
@@ -196,6 +196,7 @@ void Screen::showNodePicker(const char *message, uint32_t durationMs, std::funct
 void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits,
                               std::function<void(uint32_t)> bannerCallback)
 {
+    LOG_WARN("Show Number Picker");
 #ifdef USE_EINK
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
 #endif
@@ -318,7 +319,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -365,6 +366,9 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
+#ifdef PIN_EINK_EN
+    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
+#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -383,19 +387,13 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
-
+#ifdef HELTEC_TRACKER_V1_X
+            uint8_t tft_vext_enabled = digitalRead(VEXT_ENABLE);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
 
-#ifdef PIN_EINK_EN
-            if (uiconfig.screen_brightness == 1)
-                digitalWrite(PIN_EINK_EN, HIGH);
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-#endif
-
 #if defined(ST7789_CS) &&                                                                                                        \
     !defined(M5STACK) // set display brightness when turning on screens. Just moved function from TFTDisplay to here.
             static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
@@ -403,7 +401,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 
             dispdev->displayOn();
 #ifdef HELTEC_TRACKER_V1_X
-            ui->init();
+            // If the TFT VEXT power is not enabled, initialize the UI.
+            if (!tft_vext_enabled) {
+                ui->init();
+            }
 #endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
@@ -425,13 +426,11 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-
-#ifdef PIN_EINK_EN
-            digitalWrite(PIN_EINK_EN, LOW);
-#elif defined(PCA_PIN_EINK_EN)
-            io.digitalWrite(PCA_PIN_EINK_EN, LOW);
+#ifdef ELECROW_ThinkNode_M1
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
+                digitalWrite(PIN_EINK_EN, LOW);
+            }
 #endif
-
             dispdev->displayOff();
 #ifdef USE_ST7789
             SPI1.end();
@@ -550,7 +549,7 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
@@ -586,7 +585,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -642,11 +641,6 @@ void Screen::forceDisplay(bool forceUiUpdate)
 
     // Tell EInk class to update the display
     static_cast<EInkDisplay *>(dispdev)->forceDisplay();
-#else
-    // No delay between UI frame rendering
-    if (forceUiUpdate) {
-        setFastFramerate();
-    }
 #endif
 }
 
@@ -692,7 +686,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        menuHandler::OnboardMessage();
+        menuHandler::LoraRegionPicker(0);
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
@@ -871,8 +865,6 @@ void Screen::setFrames(FrameFocus focus)
     uint8_t previousFrameCount = framesetInfo.frameCount;
     FramesetInfo fsi; // Location of specific frames, for applying focus parameter
 
-    graphics::UIRenderer::rebuildFavoritedNodes();
-
     LOG_DEBUG("Show standard frames");
     showingNormalScreen = true;
 
@@ -1008,7 +1000,7 @@ void Screen::setFrames(FrameFocus focus)
     // Insert favorite frames *after* collecting them all
     if (!favoriteFrames.empty()) {
         fsi.positions.firstFavorite = numframes;
-        for (const auto &f : favoriteFrames) {
+        for (auto &f : favoriteFrames) {
             normalFrames[numframes++] = f;
             indicatorIcons.push_back(icon_node);
         }
@@ -1266,12 +1258,8 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             devicestate.has_rx_text_message = true; // Needed to include the message frame
             hasUnreadMessage = true;                // Enables mail icon in the header
             setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view
+            forceDisplay();                         // Forces screen redraw
 
-            // Only wake/force display if the configuration allows it
-            if (shouldWakeOnReceivedMessage()) {
-                setOn(true);    // Wake up the screen first
-                forceDisplay(); // Forces screen redraw
-            }
             // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
             const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
@@ -1342,7 +1330,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     setFastFramerate();                       // Draw ASAP
 #endif
     if (NotificationRenderer::isOverlayBannerShowing()) {
-        NotificationRenderer::inEvent = *event;
+        NotificationRenderer::inEvent = event->inputEvent;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
         ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
         setFastFramerate(); // Draw ASAP
@@ -1382,12 +1370,9 @@ int Screen::handleInputEvent(const InputEvent *event)
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
                     menuHandler::LoraRegionPicker();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
-                    if (devicestate.rx_text_message.from) {
-                        menuHandler::messageResponseMenu();
-                    } else {
-                        menuHandler::textMessageBaseMenu();
-                    }
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
+                           devicestate.rx_text_message.from) {
+                    menuHandler::messageResponseMenu();
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
@@ -1439,23 +1424,3 @@ bool Screen::isOverlayBannerShowing()
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
 #endif // HAS_SCREEN
-
-bool shouldWakeOnReceivedMessage()
-{
-    /*
-    The goal here is to determine when we do NOT wake up the screen on message received:
-    - Any ext. notifications are turned on
-    - If role is not client / client_mute
-    - If the battery level is very low
-    */
-    if (moduleConfig.external_notification.enabled) {
-        return false;
-    }
-    if (!meshtastic_Config_DeviceConfig_Role_CLIENT && !meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE) {
-        return false;
-    }
-    if (powerStatus && powerStatus->getBatteryChargePercent() < 10) {
-        return false;
-    }
-    return true;
-}

src/graphics/Screen.h

@@ -26,8 +26,6 @@ struct BannerOverlayOptions {
 };
 } // namespace graphics
 
-bool shouldWakeOnReceivedMessage();
-
 #if !HAS_SCREEN
 #include "power.h"
 namespace graphics
@@ -94,7 +92,6 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
-#include "graphics/draw/MenuHandler.h"
 #include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "modules/AdminModule.h"
@@ -311,15 +308,9 @@ class Screen : public concurrency::OSThread
     void showSimpleBanner(const char *message, uint32_t durationMs = 0);
     void showOverlayBanner(BannerOverlayOptions);
 
-    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
+    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback);
     void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);
 
-    void requestMenu(graphics::menuHandler::screenMenus menuToShow)
-    {
-        graphics::menuHandler::menuQueue = menuToShow;
-        runNow();
-    }
-
     void startFirmwareUpdateScreen()
     {
         ScreenCmd cmd;

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#ifdef CROWPANEL_ESP32S3_5_EPAPER
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,9 +40,6 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
-#ifdef OLED_RU
-#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
-#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -53,13 +50,9 @@
 #endif
 #endif
 #endif
-#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
-#ifdef OLED_RU
-#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
-#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -70,10 +63,9 @@
 #endif
 #endif
 #endif
-#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
@@ -85,7 +77,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/SharedUIDisplay.cpp

@@ -206,7 +206,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
-        int iconRightEdge = timeX - 2;
+        int iconRightEdge = timeX - 1;
 
         bool showMail = false;
 

src/graphics/TFTDisplay.cpp

@@ -562,91 +562,6 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
-#elif defined(ST7796_CS)
-#include <LovyanGFX.hpp> // Graphics and font library for ST7796 driver chip
-
-class LGFX : public lgfx::LGFX_Device
-{
-    lgfx::Panel_ST7796 _panel_instance;
-    lgfx::Bus_SPI _bus_instance;
-    lgfx::Light_PWM _light_instance;
-
-  public:
-    LGFX(void)
-    {
-        {
-            auto cfg = _bus_instance.config();
-
-            // SPI
-            cfg.spi_host = ST7796_SPI_HOST;
-            cfg.spi_mode = 0;
-            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
-                                            // 80MHz by an integer)
-            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
-            cfg.spi_3wire = false;
-            cfg.use_lock = true;               // Set to true to use transaction locking
-            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
-                                               // SPI_DMA_CH_AUTO=auto setting)
-            cfg.pin_sclk = ST7796_SCK;         // Set SPI SCLK pin number
-            cfg.pin_mosi = ST7796_SDA;         // Set SPI MOSI pin number
-            cfg.pin_miso = ST7796_MISO;        // Set SPI MISO pin number (-1 = disable)
-            cfg.pin_dc = ST7796_RS;            // Set SPI DC pin number (-1 = disable)
-
-            _bus_instance.config(cfg);              // applies the set value to the bus.
-            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
-        }
-
-        {                                        // Set the display panel control.
-            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
-
-            cfg.pin_cs = ST7796_CS;     // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7796_RESET; // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7796_BUSY; // Pin number where BUSY is connected (-1 = disable)
-
-            // cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
-            // cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
-            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
-            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
-            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
-            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
-            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
-#ifdef TFT_DUMMY_READ_PIXELS
-            cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
-#else
-            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
-#endif
-            cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
-            cfg.readable = true;                          // Set to true if data can be read
-            cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
-            cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
-            cfg.dlen_16bit =
-                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
-            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
-
-            _panel_instance.config(cfg);
-        }
-
-#ifdef ST7796_BL
-        // Set the backlight control. (delete if not necessary)
-        {
-            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
-
-            cfg.pin_bl = ST7796_BL; // Pin number to which the backlight is connected
-            cfg.invert = false;     // true to invert the brightness of the backlight
-            cfg.freq = 44100;
-            cfg.pwm_channel = 7;
-
-            _light_instance.config(cfg);
-            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
-        }
-#endif
-
-        setPanel(&_panel_instance); // Sets the panel to use.
-    }
-};
-
-static LGFX *tft = nullptr;
-
 #elif defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER)
 
 #include <LovyanGFX.hpp> // Graphics and font library for ILI9341/ILI9342 driver chip
@@ -752,19 +667,15 @@ static LGFX *tft = nullptr;
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#if defined(LGFX_SDL)
-#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
-#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
+    lgfx::Panel_Device *_panel_instance;
     lgfx::Bus_SPI _bus_instance;
 
     lgfx::ITouch *_touch_instance;
 
   public:
-    lgfx::Panel_Device *_panel_instance;
-
     LGFX(void)
     {
         if (settingsMap[displayPanel] == st7789)
@@ -783,11 +694,6 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9488;
         else if (settingsMap[displayPanel] == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
-#if defined(LGFX_SDL)
-        else if (settingsMap[displayPanel] == x11) {
-            _panel_instance = new lgfx::Panel_sdl;
-        }
-#endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
             LOG_ERROR("Unknown display panel configured!");
@@ -848,13 +754,7 @@ class LGFX : public lgfx::LGFX_Device
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-#if defined(LGFX_SDL)
-        if (settingsMap[displayPanel] == x11) {
-            lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
-            sdl_panel_->setup();
-            sdl_panel_->addKeyCodeMapping(SDLK_RETURN, SDL_SCANCODE_KP_ENTER);
-        }
-#endif
+
         setPanel(_panel_instance); // Sets the panel to use.
     }
 };
@@ -949,29 +849,9 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
-class PanelInit_ST7701 : public lgfx::Panel_ST7701
-{
-  public:
-    const uint8_t *getInitCommands(uint8_t listno) const override
-    {
-        // 180 degree hw rotation: vertical flip, horizontal flip
-        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
-                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
-                                                  0xFF, 0xFF};
-        switch (listno) {
-        case 1:
-            return list1;
-        default:
-            return lgfx::Panel_ST7701::getInitCommands(listno);
-        }
-    }
-};
-
 class LGFX : public lgfx::LGFX_Device
 {
-    PanelInit_ST7701 _panel_instance;
+    lgfx::Panel_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -1082,9 +962,8 @@ static LGFX *tft = nullptr;
 
 #endif
 
-#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
-    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||      \
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1133,140 +1012,32 @@ void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
         tft->fillScreen(TFT_BLACK);
-
+    // tft->clear();
     concurrency::LockGuard g(spiLock);
 
-    uint32_t x, y;
-    uint32_t y_byteIndex;
-    uint8_t y_byteMask;
-    uint32_t x_FirstPixelUpdate;
-    uint32_t x_LastPixelUpdate;
-    bool isset, dblbuf_isset;
-    uint16_t colorTftMesh, colorTftBlack;
-    bool somethingChanged = false;
+    uint16_t x, y;
 
-    // Store colors byte-reversed so that TFT_eSPI doesn't have to swap bytes in a separate step
-    colorTftMesh = (TFT_MESH >> 8) | ((TFT_MESH & 0xFF) << 8);
-    colorTftBlack = (TFT_BLACK >> 8) | ((TFT_BLACK & 0xFF) << 8);
-
-    y = 0;
-    while (y < displayHeight) {
-        y_byteIndex = (y / 8) * displayWidth;
-        y_byteMask = (1 << (y & 7));
-
-        // Step 1: Do a quick scan of 8 rows together. This allows fast-forwarding over unchanged screen areas.
-        if (y_byteMask == 1) {
+    for (y = 0; y < displayHeight; y++) {
+        for (x = 0; x < displayWidth; x++) {
+            auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
             if (!fromBlank) {
-                for (x = 0; x < displayWidth; x++) {
-                    if (buffer[x + y_byteIndex] != buffer_back[x + y_byteIndex])
-                        break;
-                }
-            } else {
-                for (x = 0; x < displayWidth; x++) {
-                    if (buffer[x + y_byteIndex] != 0)
-                        break;
-                }
-            }
-            if (x >= displayWidth) {
-                // No changed pixels found in these 8 rows, fast-forward to the next 8
-                y = y + 8;
-                continue;
-            }
-        }
-
-        // Step 2: Scan each of the 8 rows individually. Find the first pixel in each row that needs updating
-        for (x_FirstPixelUpdate = 0; x_FirstPixelUpdate < displayWidth; x_FirstPixelUpdate++) {
-            isset = buffer[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
-
-            if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses
-                dblbuf_isset = buffer_back[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
                 if (isset != dblbuf_isset) {
-                    break;
+                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
                 }
             } else if (isset) {
-                break;
+                tft->drawPixel(x, y, TFT_MESH);
             }
         }
-
-        // Did we find a pixel that needs updating on this row?
-        if (x_FirstPixelUpdate < displayWidth) {
-
-            // Quickly write out the first changed pixel (saves another array lookup)
-            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
-            x_LastPixelUpdate = x_FirstPixelUpdate;
-
-            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating
-            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
-                isset = buffer[x + y_byteIndex] & y_byteMask;
-                linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
-
-                if (!fromBlank) {
-                    dblbuf_isset = buffer_back[x + y_byteIndex] & y_byteMask;
-                    if (isset != dblbuf_isset) {
-                        x_LastPixelUpdate = x;
-                    }
-                } else if (isset) {
-                    x_LastPixelUpdate = x;
-                }
-            }
-
-            // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
-            // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
-            tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
-                          &linePixelBuffer[x_FirstPixelUpdate]);
-
-            somethingChanged = true;
-        }
-        y++;
     }
     // Copy the Buffer to the Back Buffer
-    if (somethingChanged)
-        memcpy(buffer_back, buffer, displayBufferSize);
-}
-
-void TFTDisplay::sdlLoop()
-{
-#if defined(LGFX_SDL)
-    static int lastPressed = 0;
-    static int shuttingDown = false;
-    if (settingsMap[displayPanel] == x11) {
-        lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)tft->_panel_instance;
-        if (sdl_panel_->loop() && !shuttingDown) {
-            LOG_WARN("Window Closed!");
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        }
-
-        // debounce
-        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
-            return;
-        if (!lgfx::v1::gpio_in(37)) {
-            lastPressed = 37;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(36)) {
-            lastPressed = 36;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(38)) {
-            lastPressed = 38;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(39)) {
-            lastPressed = 39;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
-            lastPressed = SDL_SCANCODE_KP_ENTER;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else {
-            lastPressed = 0;
+    for (y = 0; y < (displayHeight / 8); y++) {
+        for (x = 0; x < displayWidth; x++) {
+            uint16_t pos = x + y * displayWidth;
+            buffer_back[pos] = buffer[pos];
         }
     }
-#endif
 }
 
 // Send a command to the display (low level function)
@@ -1413,23 +1184,15 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
+#elif ARCH_PORTDUINO
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft->fillScreen(TFT_BLACK);
 
-    if (this->linePixelBuffer == NULL) {
-        this->linePixelBuffer = (uint16_t *)malloc(sizeof(uint16_t) * displayWidth);
-
-        if (!this->linePixelBuffer) {
-            LOG_ERROR("Not enough memory to create TFT line buffer\n");
-            return false;
-        }
-    }
     return true;
 }
 

src/graphics/TFTDisplay.h

@@ -23,7 +23,6 @@ class TFTDisplay : public OLEDDisplay
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);
-    void sdlLoop();
 
     // Turn the display upside down
     virtual void flipScreenVertically();
@@ -58,6 +57,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-
-    uint16_t *linePixelBuffer = nullptr;
 };

src/graphics/draw/ClockRenderer.cpp

@@ -186,7 +186,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 {
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-
+    int line = 1;
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
@@ -218,6 +218,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hour %= 12;
         if (hour == 0)
             hour = 12;
+        bool isPM = hour >= 12;
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -229,8 +230,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 
 #ifdef T_WATCH_S3
     float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
 #else
     float scale = 0.75;
     if (isHighResolution) {
@@ -286,9 +285,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     int yOffset = (isHighResolution) ? 3 : 1;
 #ifdef SENSECAP_INDICATOR
     yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
 #endif
     if (config.display.use_12h_clock) {
         display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
@@ -366,7 +362,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // hour hand radius and y coordinate
     int16_t hourHandRadius = radius * 0.35;
     if (isHighResolution) {
-        hourHandRadius = radius * 0.55;
+        int16_t hourHandRadius = radius * 0.55;
     }
     int16_t hourHandNoonY = centerY - hourHandRadius;
 
@@ -385,7 +381,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
         bool isPM = hour >= 12;
         if (config.display.use_12h_clock) {
-            isPM = hour >= 12;
+            bool isPM = hour >= 12;
             display->setFont(FONT_SMALL);
             int yOffset = isHighResolution ? 1 : 0;
 #ifdef USE_EINK

src/graphics/draw/DebugRenderer.cpp

@@ -94,8 +94,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -107,7 +106,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -122,8 +121,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -414,9 +412,9 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     float freq = RadioLibInterface::instance->getFreq();
     snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
     if (config.lora.channel_num == 0) {
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
     } else {
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
     }
     size_t len = strlen(frequencyslot);
     if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
@@ -485,7 +483,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 }
 
 // ****************************
-// *      System Screen       *
+// *      Memory Screen       *
 // ****************************
 void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -595,19 +593,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     }
     line += 1;
     char appversionstr[35];
-    snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
-    char appversionstr_formatted[40];
-    char *lastDot = strrchr(appversionstr, '.');
-    if (lastDot) {
-        size_t prefixLen = lastDot - appversionstr;
-        strncpy(appversionstr_formatted, appversionstr, prefixLen);
-        appversionstr_formatted[prefixLen] = '\0';
-        strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
-        appversionstr[sizeof(appversionstr) - 1] = '\0';
-    }
+    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);

src/graphics/draw/MenuHandler.cpp

@@ -13,10 +13,6 @@
 #include "main.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
-#include "modules/KeyVerificationModule.h"
-
-#include "modules/TraceRouteModule.h"
-#include <functional>
 
 extern uint16_t TFT_MESH;
 
@@ -26,27 +22,6 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
-void menuHandler::OnboardMessage()
-{
-    static const char *optionsArray[] = {"OK", "Got it!"};
-    enum optionsNumbers { OK, got };
-    BannerOverlayOptions bannerOptions;
-#if HAS_TFT
-    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
-#elif defined(BUTTON_PIN)
-    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
-#else
-    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
-#endif
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
-        screen->runNow();
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -75,14 +50,12 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "PH_915",
                                          "ANZ_433",
                                          "KZ_433",
-                                         "KZ_863",
-                                         "NP_865",
-                                         "BR_902"};
+                                         "KZ_863"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Set the LoRa region";
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 27;
+    bannerOptions.optionsCount = 25;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -141,22 +114,6 @@ void menuHandler::TwelveHourPicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
-// Reusable confirmation prompt function
-void menuHandler::showConfirmationBanner(const char *message, std::function<void()> onConfirm)
-{
-    static const char *confirmOptions[] = {"No", "Yes"};
-    BannerOverlayOptions confirmBanner;
-    confirmBanner.message = message;
-    confirmBanner.optionsArrayPtr = confirmOptions;
-    confirmBanner.optionsCount = 2;
-    confirmBanner.bannerCallback = [onConfirm](int confirmSelected) -> void {
-        if (confirmSelected == 1) {
-            onConfirm();
-        }
-    };
-    screen->showOverlayBanner(confirmBanner);
-}
-
 void menuHandler::ClockFacePicker()
 {
     static const char *optionsArray[] = {"Back", "Digital", "Analog"};
@@ -171,11 +128,11 @@ void menuHandler::ClockFacePicker()
             screen->runNow();
         } else if (selected == Digital) {
             uiconfig.is_clockface_analog = false;
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
             screen->setFrames(Screen::FOCUS_CLOCK);
         } else {
             uiconfig.is_clockface_analog = true;
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
             screen->setFrames(Screen::FOCUS_CLOCK);
         }
     };
@@ -193,7 +150,6 @@ void menuHandler::TZPicker()
                                          "US/Mountain",
                                          "US/Central",
                                          "US/Eastern",
-                                         "BR/Brasilia",
                                          "UTC",
                                          "EU/Western",
                                          "EU/"
@@ -208,7 +164,7 @@ void menuHandler::TZPicker()
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Pick Timezone";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 19;
+    bannerOptions.optionsCount = 17;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 0) {
             menuHandler::menuQueue = menuHandler::clock_menu;
@@ -227,27 +183,25 @@ void menuHandler::TZPicker()
             strncpy(config.device.tzdef, "CST6CDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
         } else if (selected == 7) { // Eastern
             strncpy(config.device.tzdef, "EST5EDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
-        } else if (selected == 8) { // Brazil
-            strncpy(config.device.tzdef, "BRT3", sizeof(config.device.tzdef));
-        } else if (selected == 9) { // UTC
-            strncpy(config.device.tzdef, "UTC0", sizeof(config.device.tzdef));
-        } else if (selected == 10) { // EU/Western
+        } else if (selected == 8) { // UTC
+            strncpy(config.device.tzdef, "UTC", sizeof(config.device.tzdef));
+        } else if (selected == 9) { // EU/Western
             strncpy(config.device.tzdef, "GMT0BST,M3.5.0/1,M10.5.0", sizeof(config.device.tzdef));
-        } else if (selected == 11) { // EU/Central
+        } else if (selected == 10) { // EU/Central
             strncpy(config.device.tzdef, "CET-1CEST,M3.5.0,M10.5.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 12) { // EU/Eastern
+        } else if (selected == 11) { // EU/Eastern
             strncpy(config.device.tzdef, "EET-2EEST,M3.5.0/3,M10.5.0/4", sizeof(config.device.tzdef));
-        } else if (selected == 13) { // Asia/Kolkata
+        } else if (selected == 12) { // Asia/Kolkata
             strncpy(config.device.tzdef, "IST-5:30", sizeof(config.device.tzdef));
-        } else if (selected == 14) { // China
+        } else if (selected == 13) { // China
             strncpy(config.device.tzdef, "HKT-8", sizeof(config.device.tzdef));
-        } else if (selected == 15) { // AU/AWST
+        } else if (selected == 14) { // AU/AWST
             strncpy(config.device.tzdef, "AWST-8", sizeof(config.device.tzdef));
-        } else if (selected == 16) { // AU/ACST
+        } else if (selected == 15) { // AU/ACST
             strncpy(config.device.tzdef, "ACST-9:30ACDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 17) { // AU/AEST
+        } else if (selected == 16) { // AU/AEST
             strncpy(config.device.tzdef, "AEST-10AEDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 18) { // NZ
+        } else if (selected == 17) { // NZ
             strncpy(config.device.tzdef, "NZST-12NZDT,M9.5.0,M4.1.0/3", sizeof(config.device.tzdef));
         }
         if (selected != 0) {
@@ -283,25 +237,27 @@ void menuHandler::clockMenu()
 
 void menuHandler::messageResponseMenu()
 {
-    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3, Aloud = 4, enumEnd = 5 };
-
-    static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply via Preset"};
-    static int optionsEnumArray[enumEnd] = {Back, Dismiss, Preset};
-    int options = 3;
 
+    static const char **optionsArrayPtr;
+    int options;
+    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3 };
     if (kb_found) {
-        optionsArray[options] = "Reply via Freetext";
-        optionsEnumArray[options++] = Freetext;
+        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext"};
+        optionsArrayPtr = optionsArray;
+        options = 4;
+    } else {
+        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset"};
+        optionsArrayPtr = optionsArray;
+        options = 3;
     }
-
 #ifdef HAS_I2S
-    optionsArray[options] = "Read Aloud";
-    optionsEnumArray[options++] = Aloud;
+    static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext", "Read Aloud"};
+    optionsArrayPtr = optionsArray;
+    options = 5;
 #endif
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Dismiss) {
@@ -320,7 +276,7 @@ void menuHandler::messageResponseMenu()
             }
         }
 #ifdef HAS_I2S
-        else if (selected == Aloud) {
+        else if (selected == 4) {
             const meshtastic_MeshPacket &mp = devicestate.rx_text_message;
             const char *msg = reinterpret_cast<const char *>(mp.decoded.payload.bytes);
 
@@ -333,13 +289,13 @@ void menuHandler::messageResponseMenu()
 
 void menuHandler::homeBaseMenu()
 {
-    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Sleep, enumEnd };
+    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep };
 
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
+    static const char *optionsArray[6] = {"Back"};
+    static int optionsEnumArray[6] = {Back};
     int options = 1;
 
-#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
+#ifdef PIN_EINK_EN
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
@@ -355,6 +311,8 @@ void menuHandler::homeBaseMenu()
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
+    optionsArray[options] = "Bluetooth Toggle";
+    optionsEnumArray[options++] = Bluetooth;
 
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Home Action";
@@ -363,24 +321,12 @@ void menuHandler::homeBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#if defined(PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
-                uiconfig.screen_brightness = 0;
+#ifdef PIN_EINK_EN
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
-                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
-            saveUIConfig();
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
-                uiconfig.screen_brightness = 0;
-                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
-            } else {
-                uiconfig.screen_brightness = 1;
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-            }
-            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -391,35 +337,9 @@ void menuHandler::homeBaseMenu()
             cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
         } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::textMessageBaseMenu()
-{
-    enum optionsNumbers { Back, Preset, Freetext, enumEnd };
-
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
-    int options = 1;
-    optionsArray[options] = "New Preset Msg";
-    optionsEnumArray[options++] = Preset;
-    if (kb_found) {
-        optionsArray[options] = "New Freetext Msg";
-        optionsEnumArray[options++] = Freetext;
-    }
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
-            cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-        } else if (selected == Freetext) {
-            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
+        } else if (selected == Bluetooth) {
+            menuQueue = bluetooth_toggle_menu;
+            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -427,25 +347,37 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
-    int options = 1;
 
-    optionsArray[options] = "Notifications";
-    optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Options";
-    optionsEnumArray[options++] = ScreenOptions;
+    // Check if brightness is supported
+    bool hasSupportBrightness = false;
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
+    hasSupportBrightness = true;
 #endif
 
-    optionsArray[options] = "Bluetooth Toggle";
-    optionsEnumArray[options++] = Bluetooth;
+    enum optionsNumbers { Back, Beeps, Brightness, Reboot, Color, MUI, Test };
+    static const char *optionsArray[7] = {"Back"};
+    static int optionsEnumArray[7] = {Back};
+    int options = 1;
 
-    optionsArray[options] = "Reboot/Shutdown";
-    optionsEnumArray[options++] = PowerMenu;
+    optionsArray[options] = "Reboot";
+    optionsEnumArray[options++] = Reboot;
 
+    optionsArray[options] = "Beeps Action";
+    optionsEnumArray[options++] = Beeps;
+
+    if (hasSupportBrightness) {
+        optionsArray[options] = "Brightness";
+        optionsEnumArray[options++] = Brightness;
+    }
+
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+    optionsArray[options] = "Screen Color";
+    optionsEnumArray[options++] = Color;
+#endif
+#if HAS_TFT
+    optionsArray[options] = "Switch to MUI";
+    optionsEnumArray[options++] = MUI;
+#endif
     if (test_enabled) {
         optionsArray[options] = "Test Menu";
         optionsEnumArray[options++] = Test;
@@ -457,21 +389,24 @@ void menuHandler::systemBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Notifications) {
-            menuHandler::menuQueue = menuHandler::notifications_menu;
+        if (selected == Beeps) {
+            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
             screen->runNow();
-        } else if (selected == ScreenOptions) {
-            menuHandler::menuQueue = menuHandler::screen_options_menu;
+        } else if (selected == Brightness) {
+            menuHandler::menuQueue = menuHandler::brightness_picker;
             screen->runNow();
-        } else if (selected == PowerMenu) {
-            menuHandler::menuQueue = menuHandler::power_menu;
+        } else if (selected == Reboot) {
+            menuHandler::menuQueue = menuHandler::reboot_menu;
+            screen->runNow();
+        } else if (selected == MUI) {
+            menuHandler::menuQueue = menuHandler::mui_picker;
+            screen->runNow();
+        } else if (selected == Color) {
+            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
             screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
-        } else if (selected == Bluetooth) {
-            menuQueue = bluetooth_toggle_menu;
-            screen->runNow();
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -484,37 +419,30 @@ void menuHandler::systemBaseMenu()
 
 void menuHandler::favoriteBaseMenu()
 {
-    enum optionsNumbers { Back, Preset, Freetext, Remove, TraceRoute, enumEnd };
-    static const char *optionsArray[enumEnd] = {"Back", "New Preset Msg"};
-    static int optionsEnumArray[enumEnd] = {Back, Preset};
-    int options = 2;
+    int options;
+    static const char **optionsArrayPtr;
 
     if (kb_found) {
-        optionsArray[options] = "New Freetext Msg";
-        optionsEnumArray[options++] = Freetext;
+        static const char *optionsArray[] = {"Back", "New Preset Msg", "New Freetext Msg", "Remove Favorite"};
+        optionsArrayPtr = optionsArray;
+        options = 4;
+    } else {
+        static const char *optionsArray[] = {"Back", "New Preset Msg", "Remove Favorite"};
+        optionsArrayPtr = optionsArray;
+        options = 3;
     }
-    optionsArray[options] = "Trace Route";
-    optionsEnumArray[options++] = TraceRoute;
-    optionsArray[options] = "Remove Favorite";
-    optionsEnumArray[options++] = Remove;
-
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Favorites Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
+        if (selected == 1) {
             cannedMessageModule->LaunchWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Freetext) {
+        } else if (selected == 2 && kb_found) {
             cannedMessageModule->LaunchFreetextWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Remove) {
+        } else if ((!kb_found && selected == 2) || (selected == 3 && kb_found)) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            if (traceRouteModule) {
-                traceRouteModule->launch(graphics::UIRenderer::currentFavoriteNodeNum);
-            }
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -522,29 +450,34 @@ void menuHandler::favoriteBaseMenu()
 
 void menuHandler::positionBaseMenu()
 {
-    enum optionsNumbers { Back, GPSToggle, CompassMenu, CompassCalibrate, enumEnd };
-
-    static const char *optionsArray[enumEnd] = {"Back", "GPS Toggle", "Compass"};
-    static int optionsEnumArray[enumEnd] = {Back, GPSToggle, CompassMenu};
-    int options = 3;
+    int options;
+    static const char **optionsArrayPtr;
+    static const char *optionsArray[] = {"Back", "GPS Toggle", "Compass"};
+    static const char *optionsArrayCalibrate[] = {"Back", "GPS Toggle", "Compass", "Compass Calibrate"};
 
     if (accelerometerThread) {
-        optionsArray[options] = "Compass Calibrate";
-        optionsEnumArray[options++] = CompassCalibrate;
+        optionsArrayPtr = optionsArrayCalibrate;
+        options = 4;
+    } else {
+        optionsArrayPtr = optionsArray;
+        options = 3;
     }
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Position Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == GPSToggle) {
+        if (selected == 1) {
+#if MESHTASTIC_EXCLUDE_GPS
+            menuQueue = menu_none;
+#else
             menuQueue = gps_toggle_menu;
             screen->runNow();
-        } else if (selected == CompassMenu) {
+#endif
+        } else if (selected == 2) {
             menuQueue = compass_point_north_menu;
             screen->runNow();
-        } else if (selected == CompassCalibrate) {
+        } else if (selected == 3) {
             accelerometerThread->calibrate(30);
         }
     };
@@ -553,25 +486,18 @@ void menuHandler::positionBaseMenu()
 
 void menuHandler::nodeListMenu()
 {
-    enum optionsNumbers { Back, Favorite, TraceRoute, Verify, Reset, enumEnd };
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Trace Route", "Key Verification", "Reset NodeDB"};
+    static const char *optionsArray[] = {"Back", "Add Favorite", "Reset NodeDB"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Node Action";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 5;
+    bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Favorite) {
+        if (selected == 1) {
             menuQueue = add_favorite;
             screen->runNow();
-        } else if (selected == Verify) {
-            menuQueue = key_verification_init;
-            screen->runNow();
-        } else if (selected == Reset) {
+        } else if (selected == 2) {
             menuQueue = reset_node_db_menu;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            menuQueue = trace_route_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -597,7 +523,6 @@ void menuHandler::resetNodeDBMenu()
 
 void menuHandler::compassNorthMenu()
 {
-    enum optionsNumbers { Back, Dynamic, Fixed, Freeze };
     static const char *optionsArray[] = {"Back", "Dynamic", "Fixed Ring", "Freeze Heading"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "North Directions?";
@@ -605,25 +530,28 @@ void menuHandler::compassNorthMenu()
     bannerOptions.optionsCount = 4;
     bannerOptions.InitialSelected = uiconfig.compass_mode + 1;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Dynamic) {
+        if (selected == 1) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_DYNAMIC) {
                 uiconfig.compass_mode = meshtastic_CompassMode_DYNAMIC;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == Fixed) {
+        } else if (selected == 2) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING) {
                 uiconfig.compass_mode = meshtastic_CompassMode_FIXED_RING;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == Freeze) {
+        } else if (selected == 3) {
             if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
                 uiconfig.compass_mode = meshtastic_CompassMode_FREEZE_HEADING;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                 screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
             }
-        } else if (selected == Back) {
+        } else if (selected == 0) {
             menuQueue = position_base_menu;
             screen->runNow();
         }
@@ -634,7 +562,6 @@ void menuHandler::compassNorthMenu()
 #if !MESHTASTIC_EXCLUDE_GPS
 void menuHandler::GPSToggleMenu()
 {
-
     static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Toggle GPS";
@@ -682,7 +609,7 @@ void menuHandler::BuzzerModeMenu()
 {
     static const char *optionsArray[] = {"All Enabled", "Disabled", "Notifications", "System Only"};
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Buzzer Mode";
+    bannerOptions.message = "Beep Action";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 4;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -725,14 +652,14 @@ void menuHandler::BrightnessPickerMenu()
 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
             // For HELTEC devices, use analogWrite to control backlight
             analogWrite(VTFT_LEDA, uiconfig.screen_brightness);
-#elif defined(ST7789_CS) || defined(ST7796_CS)
+#elif defined(ST7789_CS)
             static_cast<TFTDisplay *>(screen->getDisplayDevice())->setDisplayBrightness(uiconfig.screen_brightness);
 #elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
             screen->getDisplayDevice()->setBrightness(uiconfig.screen_brightness);
 #endif
 
             // Save to device
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
 
             LOG_INFO("Screen brightness set to %d", uiconfig.screen_brightness);
         }
@@ -743,13 +670,13 @@ void menuHandler::BrightnessPickerMenu()
 
 void menuHandler::switchToMUIMenu()
 {
-    static const char *optionsArray[] = {"No", "Yes"};
+    static const char *optionsArray[] = {"Yes", "No"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Switch to MUI?";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 0) {
             config.display.displaymode = meshtastic_Config_DisplayConfig_DisplayMode_COLOR;
             config.bluetooth.enabled = false;
             service->reloadConfig(SEGMENT_CONFIG);
@@ -768,7 +695,6 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -815,11 +741,9 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
             TFT_MESH_r = 255;
             TFT_MESH_g = 255;
             TFT_MESH_b = 255;
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
         }
 
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
         if (selected != 0) {
             display->setColor(BLACK);
             display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
@@ -846,7 +770,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
                 uiconfig.screen_rgb_color = (TFT_MESH_r << 16) | (TFT_MESH_g << 8) | TFT_MESH_b;
             }
             LOG_INFO("Storing Value of %d to uiconfig.screen_rgb_color", uiconfig.screen_rgb_color);
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
         }
 #endif
     };
@@ -865,28 +789,6 @@ void menuHandler::rebootMenu()
             IF_SCREEN(screen->showSimpleBanner("Rebooting...", 0));
             nodeDB->saveToDisk();
             rebootAtMsec = millis() + DEFAULT_REBOOT_SECONDS * 1000;
-        } else {
-            menuQueue = power_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::shutdownMenu()
-{
-    static const char *optionsArray[] = {"Back", "Confirm"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Shutdown Device?";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else {
-            menuQueue = power_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -894,7 +796,7 @@ void menuHandler::shutdownMenu()
 
 void menuHandler::addFavoriteMenu()
 {
-    screen->showNodePicker("Node To Favorite", 30000, [](uint32_t nodenum) -> void {
+    screen->showNodePicker("Node To Favorite", 30000, [](int nodenum) -> void {
         LOG_WARN("Nodenum: %u", nodenum);
         nodeDB->set_favorite(true, nodenum);
         screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
@@ -916,24 +818,13 @@ void menuHandler::removeFavoriteMenu()
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
-            LOG_INFO("Removing %x as favorite node", graphics::UIRenderer::currentFavoriteNodeNum);
             nodeDB->set_favorite(false, graphics::UIRenderer::currentFavoriteNodeNum);
-            screen->setFrames(graphics::Screen::FOCUS_DEFAULT);
+            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
         }
     };
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::traceRouteMenu()
-{
-    screen->showNodePicker("Node to Trace", 30000, [](uint32_t nodenum) -> void {
-        LOG_INFO("Menu: Node picker selected node 0x%08x, traceRouteModule=%p", nodenum, traceRouteModule);
-        if (traceRouteModule) {
-            traceRouteModule->startTraceRoute(nodenum);
-        }
-    });
-}
-
 void menuHandler::testMenu()
 {
 
@@ -996,153 +887,6 @@ void menuHandler::wifiToggleMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::notificationsMenu()
-{
-    enum optionsNumbers { Back, BuzzerActions };
-    static const char *optionsArray[] = {"Back", "Buzzer Actions"};
-    static int optionsEnumArray[] = {Back, BuzzerActions};
-    int options = 2;
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Notifications";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == BuzzerActions) {
-            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::screenOptionsMenu()
-{
-    // Check if brightness is supported
-    bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
-    hasSupportBrightness = true;
-#endif
-
-#if defined(T_DECK)
-    // TDeck Doesn't seem to support brightness at all, at least not reliably
-    hasSupportBrightness = false;
-#endif
-
-    enum optionsNumbers { Back, Brightness, ScreenColor };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
-    int options = 1;
-
-    // Only show brightness for B&W displays
-    if (hasSupportBrightness) {
-        optionsArray[options] = "Brightness";
-        optionsEnumArray[options++] = Brightness;
-    }
-
-    // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
-    optionsArray[options] = "Screen Color";
-    optionsEnumArray[options++] = ScreenColor;
-#endif
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Screen Options";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Brightness) {
-            menuHandler::menuQueue = menuHandler::brightness_picker;
-            screen->runNow();
-        } else if (selected == ScreenColor) {
-            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::powerMenu()
-{
-
-    enum optionsNumbers { Back, Reboot, Shutdown, MUI };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
-    int options = 1;
-
-    optionsArray[options] = "Reboot";
-    optionsEnumArray[options++] = Reboot;
-
-    optionsArray[options] = "Shutdown";
-    optionsEnumArray[options++] = Shutdown;
-
-#if HAS_TFT
-    optionsArray[options] = "Switch to MUI";
-    optionsEnumArray[options++] = MUI;
-#endif
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Reboot / Shutdown";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Reboot) {
-            menuHandler::menuQueue = menuHandler::reboot_menu;
-            screen->runNow();
-        } else if (selected == Shutdown) {
-            menuHandler::menuQueue = menuHandler::shutdown_menu;
-            screen->runNow();
-        } else if (selected == MUI) {
-            menuHandler::menuQueue = menuHandler::mui_picker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::keyVerificationInitMenu()
-{
-    screen->showNodePicker("Node to Verify", 30000,
-                           [](uint32_t selected) -> void { keyVerificationModule->sendInitialRequest(selected); });
-}
-
-void menuHandler::keyVerificationFinalPrompt()
-{
-    char message[40] = {0};
-    memset(message, 0, sizeof(message));
-    sprintf(message, "Verification: \n");
-    keyVerificationModule->generateVerificationCode(message + 15); // send the toPhone packet
-
-    if (screen) {
-        static const char *optionsArray[] = {"Reject", "Accept"};
-        graphics::BannerOverlayOptions options;
-        options.message = message;
-        options.durationMs = 30000;
-        options.optionsArrayPtr = optionsArray;
-        options.optionsCount = 2;
-        options.notificationType = graphics::notificationTypeEnum::selection_picker;
-        options.bannerCallback = [=](int selected) {
-            if (selected == 1) {
-                auto remoteNodePtr = nodeDB->getMeshNode(keyVerificationModule->getCurrentRemoteNode());
-                remoteNodePtr->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
-            }
-        };
-        screen->showOverlayBanner(options);
-    }
-}
-
 void menuHandler::handleMenuSwitch(OLEDDisplay *display)
 {
     if (menuQueue != menu_none)
@@ -1153,9 +897,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case lora_picker:
         LoraRegionPicker();
         break;
-    case no_timeout_lora_picker:
-        LoraRegionPicker(0);
-        break;
     case TZ_picker:
         TZPicker();
         break;
@@ -1168,9 +909,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case clock_menu:
         clockMenu();
         break;
-    case system_base_menu:
-        systemBaseMenu();
-        break;
     case position_base_menu:
         positionBaseMenu();
         break;
@@ -1200,18 +938,12 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case reboot_menu:
         rebootMenu();
         break;
-    case shutdown_menu:
-        shutdownMenu();
-        break;
     case add_favorite:
         addFavoriteMenu();
         break;
     case remove_favorite:
         removeFavoriteMenu();
         break;
-    case trace_route_menu:
-        traceRouteMenu();
-        break;
     case test_menu:
         testMenu();
         break;
@@ -1221,36 +953,13 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case wifi_toggle_menu:
         wifiToggleMenu();
         break;
-    case key_verification_init:
-        keyVerificationInitMenu();
-        break;
-    case key_verification_final_prompt:
-        keyVerificationFinalPrompt();
-        break;
     case bluetooth_toggle_menu:
         BluetoothToggleMenu();
         break;
-    case notifications_menu:
-        notificationsMenu();
-        break;
-    case screen_options_menu:
-        screenOptionsMenu();
-        break;
-    case power_menu:
-        powerMenu();
-        break;
-    case throttle_message:
-        screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
-        break;
     }
     menuQueue = menu_none;
 }
 
-void menuHandler::saveUIConfig()
-{
-    nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
-}
-
 } // namespace graphics
 
 #endif

src/graphics/draw/MenuHandler.h

@@ -1,5 +1,3 @@
-#pragma once
-#if HAS_SCREEN
 #include "configuration.h"
 namespace graphics
 {
@@ -10,7 +8,6 @@ class menuHandler
     enum screenMenus {
         menu_none,
         lora_picker,
-        no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
         clock_face_picker,
@@ -24,35 +21,23 @@ class menuHandler
         tftcolormenupicker,
         brightness_picker,
         reboot_menu,
-        shutdown_menu,
         add_favorite,
         remove_favorite,
         test_menu,
         number_test,
         wifi_toggle_menu,
-        bluetooth_toggle_menu,
-        notifications_menu,
-        screen_options_menu,
-        power_menu,
-        system_base_menu,
-        key_verification_init,
-        key_verification_final_prompt,
-        trace_route_menu,
-        throttle_message,
+        bluetooth_toggle_menu
     };
     static screenMenus menuQueue;
 
-    static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void handleMenuSwitch(OLEDDisplay *display);
-    static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);
     static void clockMenu();
     static void TZPicker();
     static void TwelveHourPicker();
     static void ClockFacePicker();
     static void messageResponseMenu();
     static void homeBaseMenu();
-    static void textMessageBaseMenu();
     static void systemBaseMenu();
     static void favoriteBaseMenu();
     static void positionBaseMenu();
@@ -65,24 +50,13 @@ class menuHandler
     static void resetNodeDBMenu();
     static void BrightnessPickerMenu();
     static void rebootMenu();
-    static void shutdownMenu();
     static void addFavoriteMenu();
     static void removeFavoriteMenu();
-    static void traceRouteMenu();
     static void testMenu();
     static void numberTest();
     static void wifiBaseMenu();
     static void wifiToggleMenu();
-    static void notificationsMenu();
-    static void screenOptionsMenu();
-    static void powerMenu();
-
-  private:
-    static void saveUIConfig();
-    static void keyVerificationInitMenu();
-    static void keyVerificationFinalPrompt();
     static void BluetoothToggleMenu();
 };
 
-} // namespace graphics
-#endif
+} // namespace graphics

src/graphics/draw/MessageRenderer.cpp

@@ -137,11 +137,7 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, textChunk.c_str());
             }
             display->drawString(cursorX, fontY, textChunk.c_str());
-#if defined(OLED_UA) || defined(OLED_RU)
-            cursorX += display->getStringWidth(textChunk.c_str(), textChunk.length(), true);
-#else
             cursorX += display->getStringWidth(textChunk.c_str());
-#endif
             i = nextControl;
             continue;
         }
@@ -159,12 +155,7 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, remaining.c_str());
             }
             display->drawString(cursorX, fontY, remaining.c_str());
-#if defined(OLED_UA) || defined(OLED_RU)
-            cursorX += display->getStringWidth(remaining.c_str(), remaining.length(), true);
-#else
             cursorX += display->getStringWidth(remaining.c_str());
-#endif
-
             break;
         }
     }
@@ -282,7 +273,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     currentKey ^= ((size_t)mp.id << 24);
 
     if (cachedKey != currentKey) {
-        LOG_INFO("Onscreen message scroll cache key needs updating: cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
+        LOG_INFO("Message cache key is misssed cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
 
         // Cache miss - regenerate lines and heights
         cachedLines = generateLines(display, headerStr, messageBuf, textWidth);
@@ -383,16 +374,10 @@ std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerS
         } else {
             word += ch;
             std::string test = line + word;
-// Keep these lines for diagnostics
-// LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
-// LOG_INFO("Current String: %s", test.c_str());
-// Note: there are boolean comparison uint16 (getStringWidth) with int (textWidth), hope textWidth is always positive :)
-#if defined(OLED_UA) || defined(OLED_RU)
-            uint16_t strWidth = display->getStringWidth(test.c_str(), test.length(), true);
-#else
-            uint16_t strWidth = display->getStringWidth(test.c_str());
-#endif
-            if (strWidth > textWidth) {
+            // Keep these lines for diagnostics
+            // LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
+            // LOG_INFO("Current String: %s", test.c_str());
+            if (display->getStringWidth(test.c_str()) > textWidth) {
                 if (!line.empty())
                     lines.push_back(line);
                 line = word;

src/graphics/draw/NotificationRenderer.cpp

@@ -26,7 +26,7 @@ extern bool hasUnreadMessage;
 namespace graphics
 {
 
-InputEvent NotificationRenderer::inEvent;
+char NotificationRenderer::inEvent = INPUT_BROKER_NONE;
 int8_t NotificationRenderer::curSelected = 0;
 char NotificationRenderer::alertBannerMessage[256] = {0};
 uint32_t NotificationRenderer::alertBannerUntil = 0;  // 0 is a special case meaning forever
@@ -72,25 +72,11 @@ void NotificationRenderer::resetBanner()
 {
     alertBannerMessage[0] = '\0';
     current_notification_type = notificationTypeEnum::none;
-
-    inEvent.inputEvent = INPUT_BROKER_NONE;
-    inEvent.kbchar = 0;
-    curSelected = 0;
-    alertBannerOptions = 0; // last x lines are seelctable options
-    optionsArrayPtr = nullptr;
-    optionsEnumPtr = nullptr;
-    alertBannerCallback = NULL;
-    pauseBanner = false;
-    numDigits = 0;
-    currentNumber = 0;
-
     nodeDB->pause_sort(false);
 }
 
 void NotificationRenderer::drawBannercallback(OLEDDisplay *display, OLEDDisplayUiState *state)
 {
-    if (!isOverlayBannerShowing() && alertBannerMessage[0] != '\0')
-        resetBanner();
     if (!isOverlayBannerShowing() || pauseBanner)
         return;
     switch (current_notification_type) {
@@ -129,40 +115,31 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
     // modulo to extract
     uint8_t this_digit = (currentNumber % (pow_of_10(numDigits - curSelected))) / (pow_of_10(numDigits - curSelected - 1));
     // Handle input
-    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
         if (this_digit == 9) {
             currentNumber -= 9 * (pow_of_10(numDigits - curSelected - 1));
         } else {
             currentNumber += (pow_of_10(numDigits - curSelected - 1));
         }
-    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
         if (this_digit == 0) {
             currentNumber += 9 * (pow_of_10(numDigits - curSelected - 1));
         } else {
             currentNumber -= (pow_of_10(numDigits - curSelected - 1));
         }
-    } else if (inEvent.inputEvent == INPUT_BROKER_ANYKEY) {
-        if (inEvent.kbchar > 47 && inEvent.kbchar < 58) { // have a digit
-            currentNumber -= this_digit * (pow_of_10(numDigits - curSelected - 1));
-            currentNumber += (inEvent.kbchar - 48) * (pow_of_10(numDigits - curSelected - 1));
-            curSelected++;
-        }
-    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_RIGHT) {
+    } else if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_RIGHT) {
         curSelected++;
-    } else if (inEvent.inputEvent == INPUT_BROKER_LEFT) {
+    } else if (inEvent == INPUT_BROKER_LEFT) {
         curSelected--;
-    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-               alertBannerUntil != 0) {
+    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
         resetBanner();
-        return;
     }
-    if (curSelected == static_cast<int8_t>(numDigits)) {
-        alertBannerCallback(currentNumber);
+    if (curSelected == numDigits) {
         resetBanner();
-        return;
+        alertBannerCallback(currentNumber);
     }
 
-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -216,18 +193,16 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
     }
 
     // Handle input
-    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
         curSelected--;
-    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
         curSelected++;
-    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
+    } else if (inEvent == INPUT_BROKER_SELECT) {
+        resetBanner();
         alertBannerCallback(selectedNodenum);
+
+    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
         resetBanner();
-        return;
-    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-               alertBannerUntil != 0) {
-        resetBanner();
-        return;
     }
 
     if (curSelected == -1)
@@ -235,7 +210,7 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
     if (curSelected == alertBannerOptions)
         curSelected = 0;
 
-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -333,11 +308,11 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     // Handle input
     if (alertBannerOptions > 0) {
-        if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+        if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
             curSelected--;
-        } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+        } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
             curSelected++;
-        } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
+        } else if (inEvent == INPUT_BROKER_SELECT) {
             if (optionsEnumPtr != nullptr) {
                 alertBannerCallback(optionsEnumPtr[curSelected]);
                 optionsEnumPtr = nullptr;
@@ -345,11 +320,8 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
                 alertBannerCallback(curSelected);
             }
             resetBanner();
-            return;
-        } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-                   alertBannerUntil != 0) {
+        } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
             resetBanner();
-            return;
         }
 
         if (curSelected == -1)
@@ -357,14 +329,12 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
         if (curSelected == alertBannerOptions)
             curSelected = 0;
     } else {
-        if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_ALT_LONG ||
-            inEvent.inputEvent == INPUT_BROKER_CANCEL) {
+        if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_ALT_LONG || inEvent == INPUT_BROKER_CANCEL) {
             resetBanner();
-            return;
         }
     }
 
-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
     if (alertBannerMessage[0] == '\0')
         return;
 
@@ -383,9 +353,7 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     uint8_t firstOptionToShow = 0;
     if (alertBannerOptions > 0) {
-        if (visibleTotalLines - lineCount == 1) {
-            firstOptionToShow = curSelected;
-        } else if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
+        if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
             if (curSelected > alertBannerOptions - visibleTotalLines + lineCount)
                 firstOptionToShow = alertBannerOptions - visibleTotalLines + lineCount;
             else
@@ -394,9 +362,6 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
             firstOptionToShow = 0;
         }
     }
-    // Useful log line for troubleshooting:
-    /* LOG_WARN("alertBannerOptions: %u, curSelected: %u, visibleTotalLines: %u, lineCount: %u, firstOptionToShow: %u",
-             alertBannerOptions, curSelected, visibleTotalLines, lineCount, firstOptionToShow); */
 
     for (int i = firstOptionToShow; i < alertBannerOptions && linesShown < visibleTotalLines; i++, linesShown++) {
         if (i == curSelected) {

src/graphics/draw/NotificationRenderer.h

@@ -11,8 +11,7 @@ namespace graphics
 class NotificationRenderer
 {
   public:
-    static InputEvent inEvent;
-    static char inKeypress;
+    static char inEvent;
     static int8_t curSelected;
     static char alertBannerMessage[256];
     static uint32_t alertBannerUntil; // 0 is a special case meaning forever

src/graphics/draw/UIRenderer.cpp

@@ -24,23 +24,6 @@ extern graphics::Screen *screen;
 namespace graphics
 {
 NodeNum UIRenderer::currentFavoriteNodeNum = 0;
-std::vector<meshtastic_NodeInfoLite *> graphics::UIRenderer::favoritedNodes;
-
-void graphics::UIRenderer::rebuildFavoritedNodes()
-{
-    favoritedNodes.clear();
-    size_t total = nodeDB->getNumMeshNodes();
-    for (size_t i = 0; i < total; i++) {
-        meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-        if (!n || n->num == nodeDB->getNodeNum())
-            continue;
-        if (n->is_favorite)
-            favoritedNodes.push_back(n);
-    }
-
-    std::sort(favoritedNodes.begin(), favoritedNodes.end(),
-              [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
-}
 
 #if !MESHTASTIC_EXCLUDE_GPS
 // GeoCoord object for coordinate conversions
@@ -194,7 +177,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -218,7 +201,27 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // **********************
 void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    // --- Cache favorite nodes for the current frame only, to save computation ---
+    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
+    static int prevFrame = -1;
 
+    // --- Only rebuild favorites list if we're on a new frame ---
+    if (state->currentFrame != prevFrame) {
+        prevFrame = state->currentFrame;
+        favoritedNodes.clear();
+        size_t total = nodeDB->getNumMeshNodes();
+        for (size_t i = 0; i < total; i++) {
+            meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+            // Skip nulls and ourself
+            if (!n || n->num == nodeDB->getNodeNum())
+                continue;
+            if (n->is_favorite)
+                favoritedNodes.push_back(n);
+        }
+        // Keep a stable, consistent display order
+        std::sort(favoritedNodes.begin(), favoritedNodes.end(),
+                  [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
+    }
     if (favoritedNodes.empty())
         return;
 
@@ -654,7 +657,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
 
     char combinedName[50];
     snprintf(combinedName, sizeof(combinedName), "%s (%s)", longNameStr.empty() ? "" : longNameStr.c_str(), shortnameble);
-    if (SCREEN_WIDTH - (display->getStringWidth(combinedName)) > 10) {
+    if (SCREEN_WIDTH - (display->getStringWidth(longName) + display->getStringWidth(shortnameble)) > 10) {
         size_t len = strlen(combinedName);
         if (len >= 3 && strcmp(combinedName + len - 3, " ()") == 0) {
             combinedName[len - 3] = '\0'; // Remove the last three characters
@@ -665,7 +668,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
             nameX, ((rows == 4) ? getTextPositions(display)[line++] : getTextPositions(display)[line++]) + yOffset, combinedName);
     } else {
         // === LongName Centered ===
-        textWidth = display->getStringWidth(longNameStr.c_str());
+        textWidth = display->getStringWidth(longName);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], longNameStr.c_str());
 

src/graphics/draw/UIRenderer.h

@@ -61,8 +61,6 @@ class UIRenderer
     static void drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static NodeNum currentFavoriteNodeNum;
-    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
-    static void rebuildFavoritedNodes();
 
 // OEM screens
 #ifdef USERPREFS_OEM_TEXT

src/graphics/fonts/EinkDisplayFonts.cpp

@@ -1,5 +1,3 @@
-#ifdef USE_EINK
-
 #include "EinkDisplayFonts.h"
 
 // Created by https://oleddisplay.squix.ch/ Consider a donation
@@ -1184,5 +1182,3 @@ const uint8_t Monospaced_plain_30[] PROGMEM = {
     0xF0, 0xFF, 0x01, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0xE0, 0x00, 0xFE, 0x03, 0x00, 0xE0, 0x80, 0x7F,
     0x00, 0x00, 0xE0, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x10 // 255
 };
-
-#endif // USE_EINK

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,8 +1,6 @@
 #ifndef EINKDISPLAYFONTS_h
 #define EINKDISPLAYFONTS_h
 
-#ifdef USE_EINK
-
 #ifdef ARDUINO
 #include <Arduino.h>
 #elif __MBED__
@@ -13,7 +11,4 @@
  * Monospaced Plain 30
  */
 extern const uint8_t Monospaced_plain_30[] PROGMEM;
-
-#endif // USE_EINK
-
 #endif

src/graphics/fonts/OLEDDisplayFontsCS.cpp

@@ -1,5 +1,3 @@
-#ifdef OLED_CS
-
 #include "OLEDDisplayFontsCS.h"
 
 // Font generated or edited with the glyphEditor
@@ -1862,6 +1860,4 @@ const uint8_t ArialMT_Plain_24_CS[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00,
     0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00,
     0x06, // 255
-};
-
-#endif // OLED_CS
+};

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -1,5 +1,4 @@
 // trunk-ignore-all(clang-format): Preserve long lines
-#ifdef OLED_PL
 #include "OLEDDisplayFontsPL.h"
 
 const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
@@ -1311,6 +1310,4 @@ const uint8_t ArialMT_Plain_24_PL[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 253
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 255
-};
-
-#endif // OLED_PL
+};

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -8,6 +8,4 @@
 #endif
 
 extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
-extern const uint8_t ArialMT_Plain_16_RU[] PROGMEM;
-extern const uint8_t ArialMT_Plain_24_RU[] PROGMEM;
 #endif

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -1,5 +1,3 @@
-#ifdef OLED_UA
-
 #include "OLEDDisplayFontsUA.h"
 
 // Font generated or edited with the glyphEditor
@@ -1922,6 +1920,4 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00,
     0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8,
     0xFF, // 1103
-};
-
-#endif // OLED_UA
+};

src/graphics/images.h

@@ -27,8 +27,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};