Update GxEPD2 to v1.6.6

src/graphics/draw/MenuHandler.cpp

@@ -266,8 +266,52 @@ void menuHandler::FrequencySlotPicker()
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
-                                      : bwCodeToKHz(loraConfig.bandwidth);
+    double bw = loraConfig.bandwidth;
+    if (loraConfig.use_preset) {
+        switch (loraConfig.modem_preset) {
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+            bw = (myRegion->wideLora) ? 1625.0 : 500;
+            break;
+        default:
+            bw = (myRegion->wideLora) ? 812.5 : 250;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+            bw = (myRegion->wideLora) ? 406.25 : 125;
+            break;
+        }
+    } else {
+        bw = loraConfig.bandwidth;
+        if (bw == 31) // This parameter is not an integer
+            bw = 31.25;
+        if (bw == 62) // Fix for 62.5Khz bandwidth
+            bw = 62.5;
+        if (bw == 200)
+            bw = 203.125;
+        if (bw == 400)
+            bw = 406.25;
+        if (bw == 800)
+            bw = 812.5;
+        if (bw == 1600)
+            bw = 1625.0;
+    }
 
     uint32_t numChannels = 0;
     if (myRegion) {

src/mesh/MeshRadio.h

@@ -22,99 +22,4 @@ struct RegionInfo {
 extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
-extern void initRegion();
-
-static inline float bwCodeToKHz(uint16_t bwCode)
-{
-    if (bwCode == 31)
-        return 31.25f;
-    if (bwCode == 62)
-        return 62.5f;
-    if (bwCode == 200)
-        return 203.125f;
-    if (bwCode == 400)
-        return 406.25f;
-    if (bwCode == 800)
-        return 812.5f;
-    if (bwCode == 1600)
-        return 1625.0f;
-    return (float)bwCode;
-}
-
-static inline uint16_t bwKHzToCode(float bwKHz)
-{
-    if (bwKHz > 31.24f && bwKHz < 31.26f)
-        return 31;
-    if (bwKHz > 62.49f && bwKHz < 62.51f)
-        return 62;
-    if (bwKHz > 203.12f && bwKHz < 203.13f)
-        return 200;
-    if (bwKHz > 406.24f && bwKHz < 406.26f)
-        return 400;
-    if (bwKHz > 812.49f && bwKHz < 812.51f)
-        return 800;
-    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
-        return 1600;
-    return (uint16_t)(bwKHz + 0.5f);
-}
-
-static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
-                                       uint8_t &cr)
-{
-    switch (preset) {
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 7;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 8;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 9;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 10;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        bwKHz = wideLora ? 1625.0f : 500.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 11;
-        break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-        bwKHz = wideLora ? 406.25f : 125.0f;
-        cr = 8;
-        sf = 12;
-        break;
-    default: // LONG_FAST (or illegal)
-        bwKHz = wideLora ? 812.5f : 250.0f;
-        cr = 5;
-        sf = 11;
-        break;
-    }
-}
-
-static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
-{
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
-    return bwKHz;
-}
+extern void initRegion();

src/mesh/NodeDB.cpp

@@ -13,7 +13,6 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
-#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -1298,13 +1297,6 @@ void NodeDB::loadFromDisk()
             LOG_INFO("Loaded saved config version %d", config.version);
         }
     }
-
-    // Coerce LoRa config fields derived from presets while bootstrapping.
-    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
-    if (config.has_lora && config.lora.use_preset) {
-        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
-    }
-
     if (backupSecurity.private_key.size > 0) {
         LOG_DEBUG("Restoring backup of security config");
         config.security = backupSecurity;

src/mesh/RadioInterface.cpp

@@ -220,34 +220,6 @@ void initRegion()
     myRegion = r;
 }
 
-void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
-{
-    if (!loraConfig.use_preset) {
-        return;
-    }
-
-    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
-    const RegionInfo *r = regions;
-    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
-        ;
-
-    const bool wideLora = r ? r->wideLora : false;
-
-    float bwKHz = 0;
-    uint8_t sf = 0;
-    uint8_t cr = 0;
-    modemPresetToParams(loraConfig.modem_preset, wideLora, bwKHz, sf, cr);
-
-    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
-    if (r && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
-        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        modemPresetToParams(loraConfig.modem_preset, wideLora, bwKHz, sf, cr);
-    }
-
-    loraConfig.bandwidth = bwKHzToCode(bwKHz);
-    loraConfig.spread_factor = sf;
-}
-
 /**
  * ## LoRaWAN for North America
 
@@ -502,7 +474,54 @@ void RadioInterface::applyModemConfig()
     bool validConfig = false; // We need to check for a valid configuration
     while (!validConfig) {
         if (loraConfig.use_preset) {
-            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
+
+            switch (loraConfig.modem_preset) {
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 7;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 8;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 9;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 10;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
+            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
+                bw = (myRegion->wideLora) ? 812.5 : 250;
+                cr = 5;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 11;
+                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+                bw = (myRegion->wideLora) ? 406.25 : 125;
+                cr = 8;
+                sf = 12;
+                break;
+            }
             if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                 cr = loraConfig.coding_rate;
                 LOG_INFO("Using custom Coding Rate %u", cr);
@@ -510,7 +529,20 @@ void RadioInterface::applyModemConfig()
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            bw = bwCodeToKHz(loraConfig.bandwidth);
+            bw = loraConfig.bandwidth;
+
+            if (bw == 31) // This parameter is not an integer
+                bw = 31.25;
+            if (bw == 62) // Fix for 62.5Khz bandwidth
+                bw = 62.5;
+            if (bw == 200)
+                bw = 203.125;
+            if (bw == 400)
+                bw = 406.25;
+            if (bw == 800)
+                bw = 812.5;
+            if (bw == 1600)
+                bw = 1625.0;
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {

src/mesh/RadioInterface.h

@@ -7,9 +7,6 @@
 #include "airtime.h"
 #include "error.h"
 
-// Forward decls to avoid pulling generated config headers into this widely-included file.
-typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
-
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission
 
 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -118,12 +115,6 @@ class RadioInterface
 
     virtual ~RadioInterface() {}
 
-    /**
-     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
-     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
-     */
-    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
-
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
      *

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,7 +19,7 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.3
 lib_ignore =

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
   adafruit/Adafruit NeoPixel@1.15.2

variants/esp32s3/t-deck-pro/platformio.ini

@@ -29,7 +29,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -15,6 +15,6 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini

@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library