Update GxEPD2 to v1.6.6

Add pin sense to wake M6 on Solar Charge (#9416 )
Update meshtastic/device-ui digest to 613c095 (#9383 )
2026-01-24 10:47:20 +00:00 · 2026-01-23 21:38:12 +00:00 · 2026-01-23 15:37:16 -06:00 · 2026-01-22 09:07:23 +11:00 · 2026-01-19 20:00:41 -06:00 · 2026-01-19 16:57:21 -06:00
16 changed files with 37 additions and 15 deletions
--- a/platformio.ini
+++ b/platformio.ini
@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
+	https://github.com/meshtastic/device-ui/archive/613c0953313bbd236f4ddc5ede447e9edf8e890a.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
--- a/src/Power.cpp
+++ b/src/Power.cpp
@@ -723,6 +723,16 @@ bool Power::setup()
            runASAP = true;
        },
        CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
 #endif
    enabled = found;
    low_voltage_counter = 0;
--- a/src/modules/NodeInfoModule.cpp
+++ b/src/modules/NodeInfoModule.cpp
@@ -2,6 +2,7 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -129,14 +130,17 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
        LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
        return NULL;
    }
-    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
-        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
+
+    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
+    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
+        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
        ignoreRequest = true; // Mark it as ignored for MeshModule
        return NULL;
    } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
+        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
        LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true; // Mark it as ignored for MeshModule
+        ignoreRequest = true;
        return NULL;
    } else {
        ignoreRequest = false; // Don't ignore requests anymore
--- a/variants/esp32/chatter2/platformio.ini
+++ b/variants/esp32/chatter2/platformio.ini
@@ -6,6 +6,8 @@ build_flags =
  ${esp32_base.build_flags}
  -D CHATTER_2
  -I variants/esp32/chatter2
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
  
 lib_deps =
  ${esp32_base.lib_deps}
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -16,6 +16,8 @@ build_flags =
  ${esp32_base.build_flags}
  -I variants/esp32/m5stack_core
  -DM5STACK
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
  -DUSER_SETUP_LOADED
  -DTFT_SDA_READ
  -DTFT_DRIVER=0x9341
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -19,7 +19,7 @@ build_flags =
 lib_deps = 
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
  lewisxhe/SensorLib@0.3.3
 lib_ignore =
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
--- a/variants/esp32s3/esp32-s3-pico/platformio.ini
+++ b/variants/esp32s3/esp32-s3-pico/platformio.ini
@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/t-deck-pro/platformio.ini
+++ b/variants/esp32s3/t-deck-pro/platformio.ini
@@ -29,7 +29,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
--- a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
@@ -67,4 +67,8 @@ void variant_shutdown()
    nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
    nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
    nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+
+    nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
 }
--- a/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
@@ -15,6 +15,6 @@ lib_deps =
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/nrf52840/TWC_mesh_v4/platformio.ini
+++ b/variants/nrf52840/TWC_mesh_v4/platformio.ini
@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/rak4631_epaper/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper/platformio.ini
@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
--- a/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
Author	SHA1	Message	Date
renovate[bot]	a563496b2e	Update GxEPD2 to v1.6.6	2026-01-23 21:38:12 +00:00
Jonathan Bennett	6d6a0734b0	Add pin sense to wake M6 on Solar Charge (#9416 )	2026-01-23 15:37:16 -06:00
renovate[bot]	3e3299f549	Update meshtastic/device-ui digest to 613c095 (#9383 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-22 09:07:23 +11:00
Ben Meadors	fb3bf783dd	Implement graduated scaling for NodeInfo send timeout based on active mesh size (#9364 ) * Implement graduated scaling for NodeInfo send timeout based on active mesh size * Shorter timeout still needed for pubkey unkown and ad-hoc send * Update src/modules/NodeInfoModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-01-19 20:00:41 -06:00
Ben Meadors	fc268d43d0	Add Meshtastic exclusion flags for webserver and paxcounter in platformio.ini	2026-01-19 16:57:21 -06:00
Jonathan Bennett	c38aff7e52	Add interrupt for external charge detection (#9332 ) Tested on Thinknode m4, m6, and T1000-e	2026-01-19 15:39:24 -06:00