Drop debug warning

* Mark implicit ACK for MQTT as MQTT transport

* TRUNK

* Fix build

* Make sure implicit ACKs from MQTT do not stop retransmissions in ReliableRouter

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/workflows/build_firmware.yml

@@ -56,16 +56,18 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Echo manifest from release/firmware-*.mt.json to job summary
+      - name: Job summary
-        if: ${{ always() }}
         env:
           PIO_ENV: ${{ inputs.pio_env }}
         run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
+          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
+          echo '' >> $GITHUB_STEP_SUMMARY
           echo '```json' >> $GITHUB_STEP_SUMMARY
           cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
           echo '' >> $GITHUB_STEP_SUMMARY
           echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v5

.github/workflows/main_matrix.yml

@@ -77,16 +77,21 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-
+    # Use 'arctastic' self-hosted runner pool when checking in the main repo
-    runs-on: ubuntu-latest
+    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v6
-      - name: Build base
+        with:
-        id: base
+          submodules: recursive
-        uses: ./.github/actions/setup-base
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
       - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: ${{ matrix.check.platform }}
+          pio_env: ${{ matrix.check.board }}
+          pio_target: check
 
   build:
     needs: [setup, version]

.github/workflows/release_channels.yml

@@ -102,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v8
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/update_protobufs.yml

@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v8
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.trunk/trunk.yaml

@@ -9,24 +9,24 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.495
-    - renovate@42.30.4
+    - renovate@42.42.2
     - prettier@3.7.4
-    - trufflehog@3.91.2
+    - trufflehog@3.92.1
     - yamllint@1.37.1
     - bandit@1.9.2
-    - trivy@0.67.2
+    - trivy@0.68.1
     - taplo@0.10.0
-    - ruff@0.14.7
+    - ruff@0.14.8
     - isort@7.0.0
     - markdownlint@0.46.0
-    - oxipng@9.1.5
+    - oxipng@10.0.0
     - svgo@4.0.0
     - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.11.0
+    - black@25.12.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

bin/build-esp32.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 # -v
+pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -32,20 +32,10 @@ cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
 echo "Copying ESP32 update bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Building Filesystem for ESP32 targets"
+echo "Copying Filesystem for ESP32 targets"
-# If you want to build the webui, uncomment the following lines
-# pio run --environment $1 -t buildfs
-# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
-# # Remove webserver files from the filesystem and rebuild
-# ls -l data/static # Diagnostic list of files
-# rm -rf data/static
-pio run --environment $1 -t buildfs --disable-auto-clean
 cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
-# Generate the manifest file
+echo "Copying manifest"
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-nrf52.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 # -v
+pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -47,8 +47,5 @@ if (echo $1 | grep -q "rak4631"); then
 	cp $SRCHEX $OUTDIR/
 fi
 
-# Generate the manifest file
+echo "Copying manifest"
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -22,15 +22,12 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 # -v
+pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
-# Generate the manifest file
+echo "Copying manifest"
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-stm32wl.sh

@@ -22,15 +22,12 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 # -v
+pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-# Generate the manifest file
+echo "Copying manifest"
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/platformio-custom.py

@@ -159,20 +159,22 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
+    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
 
-# Rename (mv) littlefs.bin to include the PROGNAME
+mtjson_deps = ["buildprog"]
-# This ensures the littlefs.bin is named consistently with the firmware
+if platform.name == "espressif32":
-env.AddPostAction('$BUILD_DIR/littlefs.bin', env.VerboseAction(
+    # Build littlefs image as part of mtjson target
-    f'mv $BUILD_DIR/littlefs.bin $BUILD_DIR/{lfsbin}',
+    # Equivalent to `pio run -t buildfs`
-    f'Renaming littlefs.bin to {lfsbin}'
+    target_lfs = env.DataToBin(
-))
+        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
+    )
+    mtjson_deps.append(target_lfs)
 
 env.AddCustomTarget(
     name="mtjson",
-    dependencies=None,
+    dependencies=mtjson_deps,
     actions=[manifest_gather],
     title="Meshtastic Manifest",
     description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=True,
+    always_build=False,
 )

bin/platformio-pre.py

@@ -11,6 +11,9 @@ else:
     prefsLoc = env["PROJECT_DIR"] + "/version.properties"
     verObj = readProps(prefsLoc)
     env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
+    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
 
 # Print the new program name for verification
 print(f"PROGNAME: {env.get('PROGNAME')}")
+if platform.name == "espressif32":
+    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

extra_scripts/esp32_extra.py

@@ -10,6 +10,12 @@ Import("env")
 platform = env.PioPlatform()
 
 sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+# IntelHex workaround, remove after fixed upstream
+# https://github.com/platformio/platform-espressif32/issues/1632
+try:
+    import intelhex
+except ImportError:
+    env.Execute("$PYTHONEXE -m pip install intelhex")
 import esptool
 
 

src/graphics/draw/DebugRenderer.cpp

@@ -532,8 +532,10 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     const int labelX = x;
     int barsOffset = (isHighResolution) ? 24 : 0;
 #ifdef USE_EINK
+#ifndef T_DECK_PRO
     barsOffset -= 12;
 #endif
+#endif
 #if defined(M5STACK_UNITC6L)
     const int barX = x + 45 + barsOffset;
 #else
@@ -574,7 +576,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 #endif
         // Value string
         display->setTextAlignment(TEXT_ALIGN_RIGHT);
-        display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
+        display->drawString(SCREEN_WIDTH, getTextPositions(display)[line], combinedStr);
     };
 
     // === Memory values ===

src/main.cpp

@@ -428,10 +428,17 @@ void setup()
 #endif
 
 #if ARCH_PORTDUINO
+    RTCQuality ourQuality = RTCQualityDevice;
+
+    std::string timeCommandResult = exec("timedatectl status | grep synchronized | grep yes -c");
+    if (timeCommandResult[0] == '1') {
+        ourQuality = RTCQualityNTP;
+    }
+
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(ourQuality, &tv);
 #endif
 
     powerMonInit();

src/mesh/MeshModule.h

@@ -225,4 +225,4 @@ class MeshModule
 /** set the destination and packet parameters of packet p intended as a reply to a particular "to" packet
  * This ensures that if the request packet was sent reliably, the reply is sent that way as well.
  */
-void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to);
+void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to);

src/mesh/NodeDB.cpp

@@ -805,11 +805,15 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.output_ms = 500;
     moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
     // Default to RAK led pin 2 (blue)
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.output = PIN_LED2;
+#if defined(MUZI_BASE)
+    moduleConfig.external_notification.active = false;
+#else
     moduleConfig.external_notification.active = true;
+#endif
     moduleConfig.external_notification.alert_message = true;
     moduleConfig.external_notification.output_ms = 1000;
     moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;

src/mesh/ReliableRouter.cpp

@@ -150,7 +150,9 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
         PacketId nakId = (c && c->error_reason != meshtastic_Routing_Error_NONE) ? p->decoded.request_id : 0;
 
         // We intentionally don't check wasSeenRecently, because it is harmless to delete non existent retransmission records
-        if (ackId || nakId) {
+        if ((ackId || nakId) &&
+            // Implicit ACKs from MQTT should not stop retransmissions
+            !(isFromUs(p) && p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MQTT)) {
             LOG_DEBUG("Received a %s for 0x%x, stopping retransmissions", ackId ? "ACK" : "NAK", ackId);
             if (ackId) {
                 stopRetransmission(p->to, ackId);

src/modules/Modules.cpp

@@ -217,7 +217,7 @@ void setupModules()
     }
 #endif // HAS_BUTTON
 #if ARCH_PORTDUINO
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
         seesawRotary = new SeesawRotary("SeesawRotary");
         if (!seesawRotary->init()) {
             delete seesawRotary;

src/modules/PositionModule.cpp

@@ -45,8 +45,12 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 {
     auto p = *pptr;
 
-    // If inbound message is a replay (or spoof!) of our own messages, we shouldn't process
+    const auto transport = mp.transport_mechanism;
-    // (why use second-hand sources for our own data?)
+    if (isFromUs(&mp) && !IS_ONE_OF(transport, meshtastic_MeshPacket_TransportMechanism_TRANSPORT_INTERNAL,
+                                    meshtastic_MeshPacket_TransportMechanism_TRANSPORT_API)) {
+        LOG_WARN("Ignoring packet supposedly from us over external transport");
+        return true;
+    }
 
     // FIXME this can in fact happen with packets sent from EUD (src=RX_SRC_USER)
     // to set fixed location, EUD-GPS location or just the time (see also issue #900)
@@ -472,19 +476,53 @@ void PositionModule::sendLostAndFoundText()
     delete[] message;
 }
 
+// Helper: return imprecise (truncated + centered) lat/lon as int32 using current precision
+static inline void computeImpreciseLatLon(int32_t inLat, int32_t inLon, uint8_t precisionBits, int32_t &outLat, int32_t &outLon)
+{
+    if (precisionBits > 0 && precisionBits < 32) {
+        // Build mask for top 'precisionBits' bits of a 32-bit unsigned field
+        const uint32_t mask = (precisionBits == 32) ? UINT32_MAX : (UINT32_MAX << (32 - precisionBits));
+        // Note: latitude_i/longitude_i are stored as signed 32-bit in meshtastic code but
+        // the bitmask logic used previously operated as unsigned—preserve that behavior by
+        // casting to uint32_t for masking, then back to int32_t.
+        uint32_t lat_u = static_cast<uint32_t>(inLat) & mask;
+        uint32_t lon_u = static_cast<uint32_t>(inLon) & mask;
+
+        // Add the "center of cell" offset used elsewhere:
+        // The code previously added (1 << (31 - precision)) to produce the middle of the possible location.
+        uint32_t center_offset = (1u << (31 - precisionBits));
+        lat_u += center_offset;
+        lon_u += center_offset;
+
+        outLat = static_cast<int32_t>(lat_u);
+        outLon = static_cast<int32_t>(lon_u);
+    } else {
+        // full precision: return input unchanged
+        outLat = inLat;
+        outLon = inLon;
+    }
+}
+
 struct SmartPosition PositionModule::getDistanceTraveledSinceLastSend(meshtastic_PositionLite currentPosition)
 {
-    // The minimum distance to travel before we are able to send a new position packet.
     const uint32_t distanceTravelThreshold =
         Default::getConfiguredOrDefault(config.position.broadcast_smart_minimum_distance, 100);
 
-    // Determine the distance in meters between two points on the globe
+    int32_t lastLatImprecise, lastLonImprecise;
-    float distanceTraveledSinceLastSend = GeoCoord::latLongToMeter(
+    int32_t currentLatImprecise, currentLonImprecise;
-        lastGpsLatitude * 1e-7, lastGpsLongitude * 1e-7, currentPosition.latitude_i * 1e-7, currentPosition.longitude_i * 1e-7);
 
-    return SmartPosition{.distanceTraveled = abs(distanceTraveledSinceLastSend),
+    computeImpreciseLatLon(lastGpsLatitude, lastGpsLongitude, precision, lastLatImprecise, lastLonImprecise);
+    computeImpreciseLatLon(currentPosition.latitude_i, currentPosition.longitude_i, precision, currentLatImprecise,
+                           currentLonImprecise);
+
+    float distMeters = GeoCoord::latLongToMeter(lastLatImprecise * 1e-7, lastLonImprecise * 1e-7, currentLatImprecise * 1e-7,
+                                                currentLonImprecise * 1e-7);
+
+    float distanceTraveled = fabsf(distMeters);
+
+    return SmartPosition{.distanceTraveled = distanceTraveled,
                          .distanceThreshold = distanceTravelThreshold,
-                         .hasTraveledOverThreshold = abs(distanceTraveledSinceLastSend) >= distanceTravelThreshold};
+                         .hasTraveledOverThreshold = distanceTraveled >= distanceTravelThreshold};
 }
 
 void PositionModule::handleNewPosition()

src/modules/RoutingModule.cpp

@@ -75,6 +75,12 @@ uint8_t RoutingModule::getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit
     return Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit); // Use the default hop limit
 }
 
+meshtastic_MeshPacket *RoutingModule::allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex,
+                                                  uint8_t hopLimit)
+{
+    return MeshModule::allocAckNak(err, to, idFrom, chIndex, hopLimit);
+}
+
 RoutingModule::RoutingModule() : ProtobufModule("routing", meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
 {
     isPromiscuous = true;

src/modules/RoutingModule.h

@@ -16,6 +16,9 @@ class RoutingModule : public ProtobufModule<meshtastic_Routing>
     virtual void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit = 0,
                             bool ackWantsAck = false);
 
+    meshtastic_MeshPacket *allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex,
+                                       uint8_t hopLimit = 0);
+
     // Given the hopStart and hopLimit upon reception of a request, return the hop limit to use for the response
     uint8_t getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit);
 

src/mqtt/MQTT.cpp

@@ -87,10 +87,13 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
         // Generate an implicit ACK towards ourselves (handled and processed only locally!) for this message.
         // We do this because packets are not rebroadcasted back into MQTT anymore and we assume that at least one node
         // receives it when we get our own packet back. Then we'll stop our retransmissions.
-        if (isFromUs(e.packet))
+        if (isFromUs(e.packet)) {
-            routingModule->sendAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
+            auto pAck = routingModule->allocAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
-        else
+            pAck->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MQTT;
+            router->sendLocal(pAck);
+        } else {
             LOG_INFO("Ignore downlink message we originally sent");
+        }
         return;
     }
     if (isFromUs(e.packet)) {

src/platform/nrf52/main-nrf52.cpp

@@ -337,7 +337,7 @@ void cpuDeepSleep(uint32_t msecToWake)
 #endif
 
 #ifdef TTGO_T_ECHO
-    // To power off the T-Echo, the display must be set 
+    // To power off the T-Echo, the display must be set
     // as an input pin; otherwise, there will be leakage current.
     pinMode(PIN_EINK_CS, INPUT);
     pinMode(PIN_EINK_DC, INPUT);

variants/esp32/esp32.ini

@@ -5,7 +5,7 @@ custom_esp32_kind = esp32
 custom_mtjson_part =
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.11.0
+  platformio/espressif32@6.12.0
 
 extra_scripts =
   ${env.extra_scripts}