Let's use the artifacts token actually

Make sure PMU sleep takes place before I2C ends

.devcontainer/Dockerfile

@@ -12,6 +12,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     libssl-dev \
     libulfius-dev \
     libyaml-cpp-dev \
+    pipx \
     pkg-config \
     python3 \
     python3-pip \
@@ -21,4 +22,4 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     zip \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pip3 install --no-cache-dir -U platformio==6.1.15
+RUN pipx install platformio==6.1.15

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,10 +49,24 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
+        - Heltec Mesh Node T114
+        - Heltec Vision Master E213
+        - Heltec Vision Master E290
+        - Heltec Vision Master T190
+        - Nano G1
+        - Nano G1 Explorer
+        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
+        - Seeed Card Tracker T1000-E
+        - Station G1
+        - Station G2
+        - unPhone
+        - CanaryOne
+        - Chatter
+        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,6 +18,7 @@ body:
         - ESP32
         - RP2040
         - Linux Native
+        - Cross-Platform
         - other
     validations:
       required: true

.github/pull_request_template.md

@@ -1,9 +1,9 @@
+### ❌ (Please delete all these tips and replace them with your text) ❌
+
 ## Thank you for sending in a pull request, here's some tips to get started!
 
-(Please delete all these tips and replace with your text)
-
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,3 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_native.yml

@@ -10,7 +10,7 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libbluetooth
+      - name: Install libs needed for native build
         shell: bash
         run: |
           sudo apt-get update --fix-missing

.github/workflows/main_matrix.yml

@@ -251,12 +251,6 @@ jobs:
           merge-multiple: true
           path: ./output
 
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
-
       - name: Display structure of downloaded files
         run: ls -R
 
@@ -266,7 +260,7 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x meshtasticd_*
 
       - uses: actions/download-artifact@v4
         with:
@@ -314,6 +308,12 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
         env:
@@ -353,3 +353,30 @@ jobs:
         with:
           add-paths: |
             version.properties
+
+      - name: Checkout meshtastic/meshtastic.github.io
+        uses: actions/checkout@v4
+        with:
+          repository: meshtastic/meshtastic.github.io
+          token: ${{ secrets.ARTIFACTS_TOKEN }}
+          path: meshtastic.github.io
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Extract firmware.zip
+        run: |
+          unzip ./firmware-${{ steps.version.outputs.version }}.zip -d meshtastic.github.io/firmware-${{ steps.version.outputs.version }}
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Commit and push changes
+        run: |
+          cd meshtastic.github.io
+          find . -type f -name 'meshtasticd_*' -exec rm -f {} +
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
+          git push

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-native
     steps:
       - name: Checkout code

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian
     steps:
       - name: Checkout code

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,7 +4,7 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     container:
       image: returntocorp/semgrep
 

.github/workflows/tests.yml

@@ -1,4 +1,4 @@
-name: Test Simulator
+name: End to end tests
 
 on:
   schedule:
@@ -55,3 +55,37 @@ jobs:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
+
+  hardware-tests:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pip install -U poetry --no-build-isolation
+          pip install -U meshtastic --pre --no-build-isolation
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Setup pnpm
+        uses: pnpm/action-setup@v2
+        with:
+          version: latest
+
+      - name: Install Dependencies
+        run: pnpm install
+
+      - name: Setup devices
+        run: pnpm run setup
+
+      - name: Execute end to end tests on connected hardware
+        run: pnpm run test

.gitmodules

@@ -1,3 +1,6 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "meshtestic"]
+	path = meshtestic
+	url = https://github.com/meshtastic/meshTestic

.trunk/trunk.yaml

@@ -1,36 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.2
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.5.0
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.76.3
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.8
-    - checkov@3.2.95
+    - bandit@1.7.9
+    - checkov@3.2.238
     - terrascan@1.19.1
-    - trivy@0.51.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.8.1
-    - ruff@0.4.4
+    - taplo@0.9.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.40.0
-    - oxipng@9.1.1
+    - markdownlint@0.41.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.0
-    - flake8@7.0.0
+    - actionlint@1.7.1
+    - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.4.2
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.18.2
+    - gitleaks@8.18.4
     - clang-format@16.0.3
-    - prettier@3.2.5
+    - prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "trunk.io"
+        "platformio.platformio-ide"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

CONTRIBUTING.md

@@ -0,0 +1,47 @@
+# Contributing to Meshtastic Firmware
+
+We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
+
+## Important First Steps
+
+Before you begin, please:
+
+1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
+
+2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
+
+3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
+
+4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
+
+## Getting Help and Discussing Ideas
+
+We encourage open communication and discussion before diving into code changes:
+
+1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
+
+2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
+
+3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
+
+## Making Contributions
+
+> [!IMPORTANT]
+> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
+
+1. Fork the repository
+2. Create a new branch for your feature or bug fix
+3. Make your changes
+4. Test your changes thoroughly
+5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
+
+## Coding Standards
+
+To ensure consistent code formatting across the project:
+
+1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
+2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
+
+Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
+
+Thank you for contributing to Meshtastic!

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
 framework = arduino
 
 build_src_filter = 

bin/build-nrf52.sh

@@ -46,3 +46,8 @@ else
 	cp bin/device-update.* $OUTDIR
 	cp bin/*.uf2 $OUTDIR
 fi
+
+if (echo $1 | grep -q "rak4631"); then
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/lora_isp4520.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52832_s132_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52832_XXAA -DNRF52",
-    "f_cpu": "64000000L",
-    "mcu": "nrf52832",
-    "variant": "lora_isp4520",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS132",
-      "sd_name": "s132",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B7"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "lora ISP4520",
-  "upload": {
-    "maximum_ram_size": 65536,
-    "maximum_size": 524288,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
-  },
-  "url": "",
-  "vendor": "PsiSoft"
-}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MS24SF1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_MS24SF1_SX1262",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "MINEWSEMI_MS24SF1_SX1262",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
+  "vendor": "Minesemi"
+}

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/seeed-sensecap-indicator.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x1A86", "0x7523"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Studio SenseCAP Indicator",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
+  "vendor": "Seeed Studio"
+}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

platformio.ini

@@ -81,12 +81,14 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_APRS
   -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
+  -DBUILD_EPOCH=$UNIX_TIME
+  ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
 
 lib_deps =
-  jgromes/RadioLib@~6.6.0
+  jgromes/RadioLib@~7.0.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
   https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
@@ -130,6 +132,7 @@ lib_deps =
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
+  adafruit/Adafruit BMP3XX Library@^2.1.5
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
@@ -153,8 +156,9 @@ lib_deps =
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   https://github.com/KodinLanewave/INA3221@^1.0.0
-  lewisxhe/SensorLib@^0.2.0
+  lewisxhe/SensorLib@0.2.0
   mprograms/QMC5883LCompass@^1.2.0
   
 
   https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
+  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

src/AccelerometerThread.h

@@ -11,6 +11,9 @@
 #include <Adafruit_LIS3DH.h>
 #include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
+#ifdef STK8XXX_INT
+#include <stk8baxx.h>
+#endif
 #include <Arduino.h>
 #include <SensorBMA423.hpp>
 #include <Wire.h>
@@ -24,6 +27,8 @@
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+volatile static bool STK_IRQ;
+
 static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
@@ -79,6 +84,11 @@ class AccelerometerThread : public concurrency::OSThread
 
         if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && STK_IRQ) {
+            STK_IRQ = false;
+            if (config.display.wake_on_tap_or_motion) {
+                wakeScreen();
+            }
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
@@ -188,6 +198,15 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
+#ifdef STK8XXX_INT
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && stk8baxx.STK8xxx_Initialization(STK8xxx_VAL_RANGE_2G)) {
+            STK_IRQ = false;
+            LOG_DEBUG("STX8BAxx initialized\n");
+            stk8baxx.STK8xxx_Anymotion_init();
+            pinMode(STK8XXX_INT, INPUT_PULLUP);
+            attachInterrupt(
+                digitalPinToInterrupt(STK8XXX_INT), [] { STK_IRQ = true; }, RISING);
+#endif
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
@@ -262,6 +281,9 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+#ifdef STK8XXX_INT
+    STK8xxx stk8baxx;
+#endif
     Adafruit_LSM6DS3TRC lsm;
     SensorBMA423 bmaSensor;
     bool BMA_IRQ = false;

src/DebugConfiguration.cpp

@@ -97,12 +97,14 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
+    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
 void Syslog::disable()
 {
     this->_enabled = false;
+    this->_client->stop();
 }
 
 bool Syslog::isEnabled()
@@ -193,4 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-#endif
+#endif

src/GpioLogic.cpp

@@ -10,6 +10,13 @@ void GpioVirtPin::set(bool value)
     }
 }
 
+void GpioHwPin::set(bool value)
+{
+    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
+    pinMode(num, OUTPUT);
+    digitalWrite(num, value);
+}
+
 GpioTransformer::GpioTransformer(GpioPin *outPin) : outPin(outPin) {}
 
 void GpioTransformer::set(bool value)
@@ -17,7 +24,7 @@ void GpioTransformer::set(bool value)
     outPin->set(value);
 }
 
-GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
+GpioUnaryTransformer::GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
 {
     assert(!inPin->dependentPin); // We only allow one dependent pin
     inPin->dependentPin = this;
@@ -27,6 +34,18 @@ GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : Gp
     // update();
 }
 
+/**
+ * Update the output pin based on the current state of the input pin.
+ */
+void GpioUnaryTransformer::update()
+{
+    auto p = inPin->get();
+    if (p == GpioVirtPin::PinState::Unset)
+        return; // Not yet fully initialized
+
+    set(p);
+}
+
 /**
  * Update the output pin based on the current state of the input pin.
  */
@@ -69,6 +88,7 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
+            // LOG_DEBUG("Doing GPIO OR\n");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:

src/GpioLogic.h

@@ -29,7 +29,7 @@ class GpioHwPin : public GpioPin
   public:
     explicit GpioHwPin(uint32_t num) : num(num) {}
 
-    void set(bool value) { digitalWrite(num, value); }
+    void set(bool value);
 };
 
 class GpioTransformer;
@@ -42,7 +42,7 @@ class GpioBinaryTransformer;
 class GpioVirtPin : public GpioPin
 {
     friend class GpioBinaryTransformer;
-    friend class GpioNotTransformer;
+    friend class GpioUnaryTransformer;
 
   public:
     enum PinState { On = true, Off = false, Unset = 2 };
@@ -79,12 +79,31 @@ class GpioTransformer
 };
 
 /**
- * A transformer that performs a unary NOT operation from an input.
+ * A transformer that just drives a hw pin based on a virtual pin.
  */
-class GpioNotTransformer : public GpioTransformer
+class GpioUnaryTransformer : public GpioTransformer
 {
   public:
-    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+    GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    virtual void update();
+
+    GpioVirtPin *inPin;
+};
+
+/**
+ * A transformer that performs a unary NOT operation from an input.
+ */
+class GpioNotTransformer : public GpioUnaryTransformer
+{
+  public:
+    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioUnaryTransformer(inPin, outPin) {}
 
   protected:
     friend class GpioVirtPin;
@@ -93,9 +112,6 @@ class GpioNotTransformer : public GpioTransformer
      * Update the output pin based on the current state of the input pin.
      */
     void update();
-
-  private:
-    GpioVirtPin *inPin;
 };
 
 /**

src/Power.cpp

@@ -136,6 +136,30 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
+static void adcEnable()
+{
+#ifdef ADC_CTRL // enable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLUP);
+#else
+    pinMode(ADC_CTRL, OUTPUT);
+    digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+#endif
+    delay(10);
+#endif
+}
+
+static void adcDisable()
+{
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLDOWN);
+#else
+    digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
+#endif
+}
+
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
@@ -226,25 +250,19 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else           // block for all other platforms
-#ifdef ADC_CTRL // enable adc voltage divider when we need to read
-            pinMode(ADC_CTRL, OUTPUT);
-            digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-            delay(10);
-#endif
+#else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-            digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
 #endif
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -275,11 +293,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         uint8_t raw_c = 0; // raw reading counter
 
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
-#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-        delay(10);
-#endif
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             int val_ = adc1_get_raw(adc_channel);
             if (val_ >= 0) { // save only valid readings
@@ -288,18 +301,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             }
             // delayMicroseconds(100);
         }
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
-#else // ADC2
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
-        delay(10);
-#endif
-#endif // End ADC_CTRL
-
+#else                            // ADC2
 #ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
         // ADC2 wifi bug workaround not required, breaks compile
         // On ESP32S3, ADC2 can take turns with Wifi (?)
@@ -334,12 +336,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif // BAT_MEASURE_ADC_UNIT
 
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        digitalWrite(ADC_CTRL, HIGH);
-#endif
-#endif // End ADC_CTRL
-
 #endif // End BAT_MEASURE_ADC_UNIT
         return (raw / (raw_c < 1 ? 1 : raw_c));
     }

src/RF95Configuration.h

@@ -3,5 +3,4 @@
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
 #define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
-#define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
-#endif
+#endif

src/configuration.h

@@ -124,7 +124,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
-#define QMC5883L_ADDR 0x1E
+#define QMC5883L_ADDR 0x0D
+#define HMC5883L_ADDR 0x1E
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
@@ -144,6 +145,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // ACCELEROMETER
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
+#define STK8BXX_ADR 0x18
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
 #define LSM6DS3_ADDR 0x6A
@@ -162,6 +164,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // IO Expander
 // -----------------------------------------------------------------------------
+#define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
 // -----------------------------------------------------------------------------
@@ -171,12 +174,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_THREAD_INTERVAL 200
 #endif
 
+// -----------------------------------------------------------------------------
+// Touchscreen
+// -----------------------------------------------------------------------------
+#define FT6336U_ADDR 0x48
+
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
+#if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
+// Older variant.h files might not be defining this value, so stay with the old default
+#define VEXT_ON_VALUE LOW
+#endif
+
 #ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
 #endif
@@ -319,4 +332,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 #include "DebugConfiguration.h"
-#include "RF95Configuration.h"
+#include "RF95Configuration.h"

src/detect/ScanI2C.cpp

@@ -37,8 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160};
-    return firstOfOrNONE(5, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX};
+    return firstOfOrNONE(6, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -24,6 +24,7 @@ class ScanI2C
         BME_280,
         BMP_280,
         BMP_085,
+        BMP_3XX,
         INA260,
         INA219,
         INA3221,
@@ -35,12 +36,14 @@ class ScanI2C
         QMC6310,
         QMI8658,
         QMC5883L,
+        HMC5883L,
         PMSA0031,
         MPU6050,
         LIS3DH,
         BMA423,
         BQ24295,
         LSM6DS3,
+        TCA9535,
         TCA9555,
         VEML7700,
         RCWL9620,
@@ -51,7 +54,9 @@ class ScanI2C
         AHT10,
         BMX160,
         DFROBOT_LARK,
-        NAU7802
+        NAU7802,
+        FT6336U,
+        STK8BAXX
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -114,4 +119,4 @@ class ScanI2C
 
   private:
     bool shouldSuppressScreen = false;
-};
+};

src/detect/ScanI2CTwoWire.cpp

@@ -267,8 +267,19 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = BMP_085;
                     break;
                 default:
-                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
-                    type = BMP_280;
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
+                    switch (registerValue) {
+                    case 0x50: // BMP-388 should be 0x50
+                        LOG_INFO("BMP-388 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                        type = BMP_3XX;
+                        break;
+                    case 0x58: // BMP-280 should be 0x58
+                    default:
+                        LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                        type = BMP_280;
+                        break;
+                    }
+                    break;
                 }
                 break;
 #ifndef HAS_NCP5623
@@ -302,17 +313,34 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
             case MCP9808_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
-                if (registerValue == 0x0400) {
-                    type = MCP9808;
-                    LOG_INFO("MCP9808 sensor found\n");
-                } else {
-                    type = LIS3DH;
-                    LOG_INFO("LIS3DH accelerometer found\n");
+                // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
+                // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
+                {
+                    // Check register 0x00 for 0x8700 response to ID STK8BA53 chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2);
+                    if (registerValue == 0x8700) {
+                        type = STK8BAXX;
+                        LOG_INFO("STK8BAXX accelerometer found\n");
+                        break;
+                    }
+
+                    // Check register 0x07 for 0x0400 response to ID MCP9808 chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
+                    if (registerValue == 0x0400) {
+                        type = MCP9808;
+                        LOG_INFO("MCP9808 sensor found\n");
+                        break;
+                    }
+
+                    // Check register 0x0F for 0x3300 response to ID LIS3DH chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
+                    if (registerValue == 0x3300) {
+                        type = LIS3DH;
+                        LOG_INFO("LIS3DH accelerometer found\n");
+                    }
+
+                    break;
                 }
-
-                break;
-
             case SHT31_4x_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
                 if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
@@ -354,18 +382,21 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
+                SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L 3-Axis digital compass found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMX160_ADDR, BMX160, "BMX160 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found\n");
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n");
                 SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found\n");
                 SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found\n");
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found\n");
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found\n");
+                SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);

src/gps/GPS.cpp

@@ -2,6 +2,7 @@
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "Default.h"
 #include "GPS.h"
+#include "GpioLogic.h"
 #include "NodeDB.h"
 #include "PowerMon.h"
 #include "RTC.h"
@@ -25,6 +26,8 @@
 
 #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
 HardwareSerial *GPS::_serial_gps = &Serial1;
+#elif defined(ARCH_RP2040)
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = NULL;
 #endif
@@ -165,18 +168,21 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             b = _serial_gps->read();
 
 #ifdef GPS_DEBUG
-            LOG_DEBUG("%02X", (char *)buffer);
+            LOG_DEBUG("%c", (b >= 32 && b <= 126) ? b : '.');
 #endif
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
-                    LOG_DEBUG("\r");
+                    LOG_DEBUG("\r\nFound: %s\r\n", message); // Log the found message
 #endif
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
+#ifdef GPS_DEBUG
+                    LOG_DEBUG("\r\n");
+#endif
                 }
             }
         }
@@ -504,21 +510,21 @@ bool GPS::setup()
             delay(250);
             _serial_gps->write("$CFGMSG,6,1,0\r\n");
             delay(250);
-        } else if (gnssModel == GNSS_MODEL_AG3335) {
+        } else if (gnssModel == GNSS_MODEL_AG3335 || gnssModel == GNSS_MODEL_AG3352) {
 
-            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B"); // Enable GPS+GALILEO+NAVIC
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
 
             // Configure NMEA (sentences will output once per fix)
-            _serial_gps->write("$PAIR062,0,0*3F"); // GGA ON
-            _serial_gps->write("$PAIR062,1,0*3F"); // GLL OFF
-            _serial_gps->write("$PAIR062,2,1*3D"); // GSA ON
-            _serial_gps->write("$PAIR062,3,0*3D"); // GSV OFF
-            _serial_gps->write("$PAIR062,4,0*3B"); // RMC ON
-            _serial_gps->write("$PAIR062,5,0*3B"); // VTG OFF
-            _serial_gps->write("$PAIR062,6,1*39"); // ZDA ON
+            _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
+            _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
+            _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF
+            _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF
+            _serial_gps->write("$PAIR062,4,1*3B\r\n"); // RMC ON
+            _serial_gps->write("$PAIR062,5,0*3B\r\n"); // VTG OFF
+            _serial_gps->write("$PAIR062,6,0*38\r\n"); // ZDA ON
 
             delay(250);
-            _serial_gps->write("$PAIR513*3D"); // save configuration
+            _serial_gps->write("$PAIR513*3D\r\n"); // save configuration
 
         } else if (gnssModel == GNSS_MODEL_UBLOX) {
             // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
@@ -875,16 +881,8 @@ void GPS::writePinEN(bool on)
     if (HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))
         return;
 
-    // Abort: if pin unset
-    if (!en_gpio)
-        return;
-
-    // Determine new value for the pin
-    bool val = GPS_EN_ACTIVE ? on : !on;
-
     // Write and log
-    pinMode(en_gpio, OUTPUT);
-    digitalWrite(en_gpio, val);
+    enablePin->set(on);
 #ifdef GPS_EXTRAVERBOSE
     LOG_DEBUG("Pin EN %s\n", val == HIGH ? "HIGH" : "LOW");
 #endif
@@ -1026,7 +1024,7 @@ void GPS::down()
     LOG_DEBUG("%us until next search\n", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= 10 * 1000UL)
+    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
@@ -1191,25 +1189,31 @@ int GPS::prepareDeepSleep(void *unused)
     return 0;
 }
 
+#define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...)                                                              \
+    LOG_DEBUG("Trying " TOWRITE " (" CHIP ") ...\n");                                                                            \
+    clearBuffer();                                                                                                               \
+    _serial_gps->write(TOWRITE "\r\n");                                                                                          \
+    if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) {                                                                         \
+        LOG_INFO(CHIP " detected, using " #DRIVER " Module\n");                                                                  \
+        return DRIVER;                                                                                                           \
+    }
+
 GnssModel_t GPS::probe(int serialSpeed)
 {
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
     _serial_gps->end();
     _serial_gps->begin(serialSpeed);
+#elif defined(ARCH_RP2040)
+    _serial_gps->end();
+    _serial_gps->setFIFOSize(256);
+    _serial_gps->begin(serialSpeed);
 #else
     if (_serial_gps->baudRate() != serialSpeed) {
         LOG_DEBUG("Setting Baud to %i\n", serialSpeed);
         _serial_gps->updateBaudRate(serialSpeed);
     }
 #endif
-#ifdef GNSS_AIROHA
-    return GNSS_MODEL_AG3335;
-#endif
-#ifdef GPS_DEBUG
-    for (int i = 0; i < 20; i++) {
-        getACK("$GP", 200);
-    }
-#endif
+
     memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
     uint8_t buffer[768] = {0};
     delay(100);
@@ -1218,70 +1222,29 @@ GnssModel_t GPS::probe(int serialSpeed)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
-    // get version information from Unicore UFirebirdII Series
-    // Works for: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
-    _serial_gps->write("$PDTINFO\r\n");
-    delay(750);
-    if (getACK("UC6580", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("UC6580 detected, using UC6580 Module\n");
-        return GNSS_MODEL_UC6580;
-    }
-
-    clearBuffer();
-    _serial_gps->write("$PDTINFO\r\n");
-    delay(750);
-    if (getACK("UM600", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("UM600 detected, using UC6580 Module\n");
-        return GNSS_MODEL_UC6580;
-    }
-
-    // Get version information for ATGM336H
-    clearBuffer();
-    _serial_gps->write("$PCAS06,1*1A\r\n");
-    if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n");
-        return GNSS_MODEL_ATGM336H;
-    }
-
+    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
+    PROBE_SIMPLE("UC6580", "$PDTINFO", "UC6580", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("UM600", "$PDTINFO", "UM600", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("ATGM336H", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H, 500);
     /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS))
     based on AT6558 */
-    clearBuffer();
-    _serial_gps->write("$PCAS06,1*1A\r\n");
-    if (getACK("$GPTXT,01,01,02,HW=ATGM332D", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("ATGM332D detected, using ATGM336H Module\n");
-        return GNSS_MODEL_ATGM336H;
-    }
+    PROBE_SIMPLE("ATGM332D", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H, 500);
 
     /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
-    clearBuffer();
-    _serial_gps->write("PAIR020*38\r\n");
-    if (getACK("$PAIR020,AG3335", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("Aioha AG3335 detected, using AG3335 Module\n");
-        return GNSS_MODEL_AG3335;
-    }
-    // Get version information for Airoha AG3335
-    clearBuffer();
-    _serial_gps->write("$PMTK605*31\r\n");
+    _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
+    _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
+    _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
+    PROBE_SIMPLE("AG3335", "$PAIR021*39", "$PAIR021,AG3335", GNSS_MODEL_AG3335, 500);
+    PROBE_SIMPLE("AG3352", "$PAIR021*39", "$PAIR021,AG3352", GNSS_MODEL_AG3352, 500);
+    PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
 
-    // Get version information
-    clearBuffer();
-    _serial_gps->write("$PCAS06,0*1B\r\n");
-    if (getACK("$GPTXT,01,01,02,SW=", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("L76K GNSS init succeeded, using L76K GNSS Module\n");
-        return GNSS_MODEL_MTK;
-    }
+    PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
 
     // Close all NMEA sentences, valid for L76B MTK platform (Waveshare Pico GPS)
     _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
     delay(20);
 
-    // Get version information
-    clearBuffer();
-    _serial_gps->write("$PMTK605*31\r\n");
-    if (getACK("Quectel-L76B", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("L76B GNSS init succeeded, using L76B GNSS Module\n");
-        return GNSS_MODEL_MTK_L76B;
-    }
+    PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500);
 
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
     UBXChecksum(cfg_rate, sizeof(cfg_rate));
@@ -1308,9 +1271,13 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->write(_message_prt, sizeof(_message_prt));
         delay(500);
         serialSpeed = 9600;
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
         _serial_gps->end();
         _serial_gps->begin(serialSpeed);
+#elif defined(ARCH_RP2040)
+        _serial_gps->end();
+        _serial_gps->setFIFOSize(256);
+        _serial_gps->begin(serialSpeed);
 #else
         _serial_gps->updateBaudRate(serialSpeed);
 #endif
@@ -1421,7 +1388,20 @@ GPS *GPS::createGps()
     GPS *new_gps = new GPS;
     new_gps->rx_gpio = _rx_gpio;
     new_gps->tx_gpio = _tx_gpio;
-    new_gps->en_gpio = _en_gpio;
+
+    GpioVirtPin *virtPin = new GpioVirtPin();
+    new_gps->enablePin = virtPin; // Always at least populate a virtual pin
+    if (_en_gpio) {
+        GpioPin *p = new GpioHwPin(_en_gpio);
+
+        if (!GPS_EN_ACTIVE) { // Need to invert the pin before hardware
+            new GpioNotTransformer(
+                virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        } else {
+            new GpioUnaryTransformer(
+                virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        }
+    }
 
 #ifdef PIN_GPS_PPS
     // pulse per second
@@ -1458,6 +1438,9 @@ GPS *GPS::createGps()
         LOG_DEBUG("Using GPIO%d for GPS RX\n", new_gps->rx_gpio);
         LOG_DEBUG("Using GPIO%d for GPS TX\n", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
+#elif defined(ARCH_RP2040)
+        _serial_gps->setFIFOSize(256);
+        _serial_gps->begin(GPS_BAUDRATE);
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -1569,7 +1552,7 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
 (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
 */
         struct tm t;
-        t.tm_sec = ti.second();
+        t.tm_sec = ti.second() + round(ti.age() / 1000);
         t.tm_min = ti.minute();
         t.tm_hour = ti.hour();
         t.tm_mday = d.day();
@@ -1577,8 +1560,8 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d\n", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec);
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d\n", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
+                      t.tm_sec, ti.age());
             perhapsSetRTC(RTCQualityGPS, t);
             return true;
         } else
@@ -1837,4 +1820,4 @@ void GPS::toggleGpsMode()
         enable();
     }
 }
-#endif // Exclude GPS
+#endif // Exclude GPS

src/gps/GPS.h

@@ -3,6 +3,7 @@
 #if !MESHTASTIC_EXCLUDE_GPS
 
 #include "GPSStatus.h"
+#include "GpioLogic.h"
 #include "Observer.h"
 #include "TinyGPS++.h"
 #include "concurrency/OSThread.h"
@@ -29,7 +30,8 @@ typedef enum {
     GNSS_MODEL_UC6580,
     GNSS_MODEL_UNKNOWN,
     GNSS_MODEL_MTK_L76B,
-    GNSS_MODEL_AG3335
+    GNSS_MODEL_AG3335,
+    GNSS_MODEL_AG3352
 } GnssModel_t;
 
 typedef enum {
@@ -73,7 +75,6 @@ class GPS : private concurrency::OSThread
     uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
-    uint32_t en_gpio = 0;
 
     int speedSelect = 0;
     int probeTries = 2;
@@ -101,7 +102,7 @@ class GPS : private concurrency::OSThread
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
-#if defined(RPI_PICO_WAVESHARE)
+#if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
@@ -152,6 +153,13 @@ class GPS : private concurrency::OSThread
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
+    /** This is normally bound to config.position.gps_en_gpio but some rare boards (like heltec tracker) need more advanced
+     * implementations. Those boards will set this public variable to a custom implementation.
+     *
+     * Normally set by GPS::createGPS()
+     */
+    GpioVirtPin *enablePin = NULL;
+
     GPS() : concurrency::OSThread("GPS") {}
 
     virtual ~GPS();
@@ -290,7 +298,6 @@ class GPS : private concurrency::OSThread
     virtual int32_t runOnce() override;
 
     // Get GNSS model
-    String getNMEA();
     GnssModel_t probe(int serialSpeed);
 
     // delay counter to allow more sats before fixed position stops GPS thread

src/gps/RTC.cpp

@@ -43,7 +43,10 @@ void readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-        LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec);
+
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900, t.tm_mon + 1,
+                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
@@ -71,7 +74,10 @@ void readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-        LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec);
+
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900,
+                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
@@ -81,7 +87,8 @@ void readFromRTC()
 #else
     if (!gettimeofday(&tv, NULL)) {
         uint32_t now = millis();
-        LOG_DEBUG("Read RTC time as %ld\n", tv.tv_sec);
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time as %ld\n", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
     }
@@ -101,6 +108,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
+    uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+#ifdef BUILD_EPOCH
+    if (tv->tv_sec < BUILD_EPOCH) {
+        LOG_WARN("Ignoring time (%ld) before build epoch (%ld)!\n", printableEpoch, BUILD_EPOCH);
+        return false;
+    }
+#endif
 
     bool shouldSet;
     if (forceUpdate) {
@@ -110,10 +124,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
     } else if (q > currentQuality) {
         shouldSet = true;
         LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
-    } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
-        // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
+    } else if (q == RTCQualityGPS) {
         shouldSet = true;
-        LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
+        LOG_DEBUG("Reapplying GPS time: %ld secs\n", printableEpoch);
+    } else if (q == RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
+        // Every 12 hrs we will slam in a new NTP or Phone GPS / NTP time, to correct for local RTC clock drift
+        shouldSet = true;
+        LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", printableEpoch);
     } else {
         shouldSet = false;
         LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
@@ -140,8 +157,8 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 #endif
             tm *t = gmtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
-            LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-                      t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
+            LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+                      t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
 #elif defined(PCF8563_RTC)
         if (rtc_found.address == PCF8563_RTC) {
@@ -154,8 +171,8 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 #endif
             tm *t = gmtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
-            LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-                      t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
+            LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1,
+                      t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
 #elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
@@ -272,4 +289,4 @@ time_t gm_mktime(struct tm *tm)
 #else
     return mktime(tm);
 #endif
-}
+}

src/graphics/EInkDisplay2.cpp

@@ -157,7 +157,7 @@ bool EInkDisplay::connect()
     }
 
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
-    defined(HELTEC_VISION_MASTER_E290)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);

src/graphics/EInkDisplay2.h

@@ -68,7 +68,7 @@ class EInkDisplay : public OLEDDisplay
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
-    defined(HELTEC_VISION_MASTER_E290)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 

src/graphics/Screen.cpp

@@ -123,7 +123,7 @@ static bool heartbeat = false;
 /// Check if the display can render a string (detect special chars; emoji)
 static bool haveGlyphs(const char *str)
 {
-#if defined(OLED_UA) || defined(OLED_RU)
+#if defined(OLED_PL) || defined(OLED_UA) || defined(OLED_RU)
     // Don't want to make any assumptions about custom language support
     return true;
 #endif
@@ -1093,7 +1093,8 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
@@ -1284,8 +1285,8 @@ static int8_t prevFrame = -1;
 // Draw the arrow pointing to a node's location
 void Screen::drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, uint16_t compassDiam, float headingRadian)
 {
-    Point tip(0.0f, 0.5f), tail(0.0f, -0.5f); // pointing up initially
-    float arrowOffsetX = 0.2f, arrowOffsetY = 0.2f;
+    Point tip(0.0f, 0.5f), tail(0.0f, -0.35f); // pointing up initially
+    float arrowOffsetX = 0.14f, arrowOffsetY = 1.0f;
     Point leftArrow(tip.x - arrowOffsetX, tip.y - arrowOffsetY), rightArrow(tip.x + arrowOffsetX, tip.y - arrowOffsetY);
 
     Point *arrowPoints[] = {&tip, &tail, &leftArrow, &rightArrow};
@@ -1295,9 +1296,19 @@ void Screen::drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t com
         arrowPoints[i]->scale(compassDiam * 0.6);
         arrowPoints[i]->translate(compassX, compassY);
     }
+    /* Old arrow
     display->drawLine(tip.x, tip.y, tail.x, tail.y);
     display->drawLine(leftArrow.x, leftArrow.y, tip.x, tip.y);
     display->drawLine(rightArrow.x, rightArrow.y, tip.x, tip.y);
+    display->drawLine(leftArrow.x, leftArrow.y, tail.x, tail.y);
+    display->drawLine(rightArrow.x, rightArrow.y, tail.x, tail.y);
+    */
+#ifdef USE_EINK
+    display->drawTriangle(tip.x, tip.y, rightArrow.x, rightArrow.y, tail.x, tail.y);
+#else
+    display->fillTriangle(tip.x, tip.y, rightArrow.x, rightArrow.y, tail.x, tail.y);
+#endif
+    display->drawTriangle(tip.x, tip.y, leftArrow.x, leftArrow.y, tail.x, tail.y);
 }
 
 // Get a string representation of the time passed since something happened
@@ -1335,22 +1346,27 @@ void Screen::drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t co
     // If north is supposed to be at the top of the compass we want rotation to be +0
     if (config.display.compass_north_top)
         myHeading = -0;
-
-    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    /* N sign points currently not deleted*/
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f); // N sign points (N1-N4)
     Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
-    Point *rosePoints[] = {&N1, &N2, &N3, &N4};
+    Point NC1(0.00f, 0.50f); // north circle center point
+    Point *rosePoints[] = {&N1, &N2, &N3, &N4, &NC1};
 
     uint16_t compassDiam = Screen::getCompassDiam(SCREEN_WIDTH, SCREEN_HEIGHT);
 
-    for (int i = 0; i < 4; i++) {
+    for (int i = 0; i < 5; i++) {
         // North on compass will be negative of heading
         rosePoints[i]->rotate(-myHeading);
         rosePoints[i]->scale(compassDiam);
         rosePoints[i]->translate(compassX, compassY);
     }
+
+    /* changed the N sign to a small circle on the compass circle.
     display->drawLine(N1.x, N1.y, N3.x, N3.y);
     display->drawLine(N2.x, N2.y, N4.x, N4.y);
     display->drawLine(N1.x, N1.y, N4.x, N4.y);
+    */
+    display->drawCircle(NC1.x, NC1.y, 4); // North sign circle, 4px radius is sufficient for all displays.
 }
 
 uint16_t Screen::getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
@@ -1514,7 +1530,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || defined(RAK14014) ||          \
+    defined(HX8357_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -1653,6 +1670,11 @@ void Screen::setup()
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
+#if defined(USE_ST7789) && defined(TFT_MESH)
+    // Heltec T114 and T190: honor a custom text color, if defined in variant.h
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
+
     // Initialising the UI will init the display too.
     ui->init();
 
@@ -1706,8 +1728,11 @@ void Screen::setup()
     // Standard behaviour is to FLIP the screen (needed on T-Beam). If this config item is set, unflip it, and thereby logically
     // flip it. If you have a headache now, you're welcome.
     if (!config.display.flip_screen) {
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||           \
+    defined(RAK14014) || defined(HX8357_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
+#elif defined(USE_ST7789)
+        static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
 #else
         dispdev->flipScreenVertically();
 #endif
@@ -1765,6 +1790,11 @@ void Screen::forceDisplay(bool forceUiUpdate)
 #ifdef USE_EINK
     // If requested, make sure queued commands are run, and UI has rendered a new frame
     if (forceUiUpdate) {
+        // Force a display refresh, in addition to the UI update
+        // Changing the GPS status bar icon apparently doesn't register as a change in image
+        // (False negative of the image hashing algorithm used to skip identical frames)
+        EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST);
+
         // No delay between UI frame rendering
         setFastFramerate();
 
@@ -2414,7 +2444,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #ifdef ARCH_ESP32
         if (millis() - storeForwardModule->lastHeartbeat >
             (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
@@ -2425,7 +2456,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
@@ -2439,8 +2471,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #endif
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -2746,4 +2778,4 @@ int Screen::handleAdminMessage(const meshtastic_AdminMessage *arg)
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -309,7 +309,7 @@ class Screen : public concurrency::OSThread
     static char customFontTableLookup(const uint8_t ch)
     {
         // UTF-8 to font table index converter
-        // Code form http://playground.arduino.cc/Main/Utf8ascii
+        // Code from http://playground.arduino.cc/Main/Utf8ascii
         static uint8_t LASTCHAR;
         static bool SKIPREST; // Only display a single unconvertable-character symbol per sequence of unconvertable characters
 
@@ -322,11 +322,57 @@ class Screen : public concurrency::OSThread
         uint8_t last = LASTCHAR; // get last char
         LASTCHAR = ch;
 
-        switch (last) { // conversion depending on first UTF8-character
+        switch (last) {
         case 0xC2: {
             SKIPREST = false;
             return (uint8_t)ch;
         }
+        }
+
+        // We want to strip out prefix chars for two-byte char formats
+        if (ch == 0xC2)
+            return (uint8_t)0;
+
+#if defined(OLED_PL)
+
+        switch (last) {
+        case 0xC3: {
+
+            if (ch == 147)
+                return (uint8_t)(ch); // Ó
+            else if (ch == 179)
+                return (uint8_t)(148); // ó
+            else
+                return (uint8_t)(ch | 0xC0);
+            break;
+        }
+
+        case 0xC4: {
+            SKIPREST = false;
+            return (uint8_t)(ch);
+        }
+
+        case 0xC5: {
+            SKIPREST = false;
+            if (ch == 132)
+                return (uint8_t)(136); // ń
+            else if (ch == 186)
+                return (uint8_t)(137); // ź
+            else
+                return (uint8_t)(ch);
+            break;
+        }
+        }
+
+        // We want to strip out prefix chars for two-byte char formats
+        if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5)
+            return (uint8_t)0;
+
+#endif
+
+#if defined(OLED_UA) || defined(OLED_RU)
+
+        switch (last) {
         case 0xC3: {
             SKIPREST = false;
             return (uint8_t)(ch | 0xC0);
@@ -376,6 +422,8 @@ class Screen : public concurrency::OSThread
         if (ch == 0xC2 || ch == 0xC3 || ch == 0x82 || ch == 0xD0 || ch == 0xD1)
             return (uint8_t)0;
 
+#endif
+
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
         // rest of it
         if (SKIPREST)

src/graphics/ScreenFonts.h

@@ -1,5 +1,9 @@
 #pragma once
 
+#ifdef OLED_PL
+#include "graphics/fonts/OLEDDisplayFontsPL.h"
+#endif
+
 #ifdef OLED_RU
 #include "graphics/fonts/OLEDDisplayFontsRU.h"
 #endif
@@ -8,13 +12,17 @@
 #include "graphics/fonts/OLEDDisplayFontsUA.h"
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19
 #define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #else
+#ifdef OLED_PL
+#define FONT_SMALL ArialMT_Plain_10_PL
+#else
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
@@ -24,6 +32,7 @@
 #define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
 #endif
+#endif
 #define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #endif

src/graphics/TFTDisplay.cpp

@@ -21,10 +21,6 @@ extern SX1509 gpioExtender;
 #if defined(ST7735S)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
-#if defined(ST7735_BACKLIGHT_EN) && !defined(TFT_BL)
-#define TFT_BL ST7735_BACKLIGHT_EN
-#endif
-
 #ifndef TFT_INVERT
 #define TFT_INVERT true
 #endif
@@ -91,24 +87,20 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef TFT_BL
         // Set the backlight control
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
 
-#ifdef ST7735_BL_V03
-            cfg.pin_bl = ST7735_BL_V03;
-#elif defined(ST7735_BL_V05)
-            cfg.pin_bl = ST7735_BL_V05;
-#else
-            cfg.pin_bl = ST7735_BL; // Pin number to which the backlight is connected
-#endif
-            cfg.invert = true; // true to invert the brightness of the backlight
+            cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
+            cfg.invert = true;   // true to invert the brightness of the backlight
             // cfg.freq = 44100;    // PWM frequency of backlight
             // cfg.pwm_channel = 1; // PWM channel number to use
 
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
         setPanel(&_panel_instance);
     }
@@ -131,10 +123,6 @@ static void rak14014_tpIntHandle(void)
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
-#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
-#define TFT_BL ST7789_BACKLIGHT_EN
-#endif
-
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -204,6 +192,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef ST7789_BL
         // Set the backlight control. (delete if not necessary)
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
@@ -215,6 +204,7 @@ class LGFX : public lgfx::LGFX_Device
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
 #if HAS_TOUCHSCREEN
         // Configure settings for touch screen control.
@@ -324,6 +314,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef TFT_BL
         // Set the backlight control
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
@@ -336,6 +327,7 @@ class LGFX : public lgfx::LGFX_Device
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
         setPanel(&_panel_instance);
     }
@@ -508,10 +500,126 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
+#elif defined(ST7701_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7701 driver chip
+#include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
+#include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7701 _panel_instance;
+    lgfx::Bus_RGB _bus_instance;
+    lgfx::Light_PWM _light_instance;
+    lgfx::Touch_FT5x06 _touch_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _panel_instance.config();
+            cfg.memory_width = 800;
+            cfg.memory_height = 480;
+            cfg.panel_width = TFT_WIDTH;
+            cfg.panel_height = TFT_HEIGHT;
+            cfg.offset_x = TFT_OFFSET_X;
+            cfg.offset_y = TFT_OFFSET_Y;
+            _panel_instance.config(cfg);
+        }
+
+        {
+            auto cfg = _panel_instance.config_detail();
+            cfg.pin_cs = ST7701_CS;
+            cfg.pin_sclk = ST7701_SCK;
+            cfg.pin_mosi = ST7701_SDA;
+            // cfg.use_psram = 1;
+            _panel_instance.config_detail(cfg);
+        }
+
+        {
+            auto cfg = _bus_instance.config();
+            cfg.panel = &_panel_instance;
+#ifdef SENSECAP_INDICATOR
+            cfg.pin_d0 = GPIO_NUM_15; // B0
+            cfg.pin_d1 = GPIO_NUM_14; // B1
+            cfg.pin_d2 = GPIO_NUM_13; // B2
+            cfg.pin_d3 = GPIO_NUM_12; // B3
+            cfg.pin_d4 = GPIO_NUM_11; // B4
+
+            cfg.pin_d5 = GPIO_NUM_10; // G0
+            cfg.pin_d6 = GPIO_NUM_9;  // G1
+            cfg.pin_d7 = GPIO_NUM_8;  // G2
+            cfg.pin_d8 = GPIO_NUM_7;  // G3
+            cfg.pin_d9 = GPIO_NUM_6;  // G4
+            cfg.pin_d10 = GPIO_NUM_5; // G5
+
+            cfg.pin_d11 = GPIO_NUM_4; // R0
+            cfg.pin_d12 = GPIO_NUM_3; // R1
+            cfg.pin_d13 = GPIO_NUM_2; // R2
+            cfg.pin_d14 = GPIO_NUM_1; // R3
+            cfg.pin_d15 = GPIO_NUM_0; // R4
+
+            cfg.pin_henable = GPIO_NUM_18;
+            cfg.pin_vsync = GPIO_NUM_17;
+            cfg.pin_hsync = GPIO_NUM_16;
+            cfg.pin_pclk = GPIO_NUM_21;
+            cfg.freq_write = 12000000;
+
+            cfg.hsync_polarity = 0;
+            cfg.hsync_front_porch = 10;
+            cfg.hsync_pulse_width = 8;
+            cfg.hsync_back_porch = 50;
+
+            cfg.vsync_polarity = 0;
+            cfg.vsync_front_porch = 10;
+            cfg.vsync_pulse_width = 8;
+            cfg.vsync_back_porch = 20;
+
+            cfg.pclk_active_neg = 0;
+            cfg.de_idle_high = 1;
+            cfg.pclk_idle_high = 0;
+#endif
+            _bus_instance.config(cfg);
+        }
+        _panel_instance.setBus(&_bus_instance);
+
+        {
+            auto cfg = _light_instance.config();
+            cfg.pin_bl = ST7701_BL;
+            _light_instance.config(cfg);
+        }
+        _panel_instance.light(&_light_instance);
+
+        {
+            auto cfg = _touch_instance.config();
+            cfg.pin_cs = -1;
+            cfg.x_min = 0;
+            cfg.x_max = 479;
+            cfg.y_min = 0;
+            cfg.y_max = 479;
+            cfg.pin_int = -1; // don't use SCREEN_TOUCH_INT;
+            cfg.pin_rst = SCREEN_TOUCH_RST;
+            cfg.bus_shared = true;
+            cfg.offset_rotation = TFT_OFFSET_ROTATION;
+
+            cfg.i2c_port = TOUCH_I2C_PORT;
+            cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+            cfg.pin_sda = I2C_SDA;
+            cfg.pin_scl = I2C_SCL;
+            cfg.freq = 400000;
+            _touch_instance.config(cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
 #endif
 
-#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || defined(HX8357_CS) ||            \
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) ||            \
+    defined(HX8357_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -521,9 +629,26 @@ static LGFX *tft = nullptr;
 extern unPhone unphone;
 #endif
 
+GpioPin *TFTDisplay::backlightEnable = NULL;
+
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     LOG_DEBUG("TFTDisplay!\n");
+
+#ifdef TFT_BL
+    GpioPin *p = new GpioHwPin(TFT_BL);
+
+    if (!TFT_BACKLIGHT_ON) { // Need to invert the pin before hardware
+        auto virtPin = new GpioVirtPin();
+        new GpioNotTransformer(
+            virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        p = virtPin;
+    }
+#else
+    GpioPin *p = new GpioVirtPin(); // Just simulate a pin
+#endif
+    backlightEnable = p;
+
 #if ARCH_PORTDUINO
     if (settingsMap[displayRotate]) {
         setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
@@ -577,24 +702,15 @@ void TFTDisplay::sendCommand(uint8_t com)
     // handle display on/off directly
     switch (com) {
     case DISPLAYON: {
+        // LOG_DEBUG("Display on\n");
+        backlightEnable->set(true);
 #if ARCH_PORTDUINO
         display(true);
         if (settingsMap[displayBacklight] > 0)
             digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V03)
-        digitalWrite(ST7735_BL_V03, TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-        pinMode(ST7735_BL_V05, OUTPUT);
-        digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
-#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
-        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
-#endif
-
-#ifdef VTFT_CTRL_V03
-        digitalWrite(VTFT_CTRL_V03, LOW);
 #endif
 
 #ifdef VTFT_CTRL
@@ -610,25 +726,17 @@ void TFTDisplay::sendCommand(uint8_t com)
         break;
     }
     case DISPLAYOFF: {
+        // LOG_DEBUG("Display off\n");
+        backlightEnable->set(false);
 #if ARCH_PORTDUINO
         tft->clear();
         if (settingsMap[displayBacklight] > 0)
             digitalWrite(settingsMap[displayBacklight], !TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V03)
-        digitalWrite(ST7735_BL_V03, !TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-        pinMode(ST7735_BL_V05, OUTPUT);
-        digitalWrite(ST7735_BL_V05, !TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
-#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
-        digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
 #endif
 
-#ifdef VTFT_CTRL_V03
-        digitalWrite(VTFT_CTRL_V03, HIGH);
-#endif
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, HIGH);
 #endif
@@ -712,23 +820,11 @@ bool TFTDisplay::connect()
     tft = new LGFX;
 #endif
 
-#ifdef TFT_BL
-    pinMode(TFT_BL, OUTPUT);
-    digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
-    // pinMode(PIN_3V3_EN, OUTPUT);
-    // digitalWrite(PIN_3V3_EN, HIGH);
+    backlightEnable->set(true);
     LOG_INFO("Power to TFT Backlight\n");
-#endif
 
-#ifdef ST7735_BL_V03
-    digitalWrite(ST7735_BL_V03, TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-    pinMode(ST7735_BL_V05, OUTPUT);
-    digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
-#endif
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
-    LOG_INFO("Power to TFT Backlight\n");
 #endif
 
     tft->init();
@@ -744,7 +840,7 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label

src/graphics/TFTDisplay.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include <GpioLogic.h>
 #include <OLEDDisplay.h>
 
 /**
@@ -39,6 +40,14 @@ class TFTDisplay : public OLEDDisplay
      */
     void setDetected(uint8_t detected);
 
+    /**
+     * This is normally managed entirely by TFTDisplay, but some rare applications (heltec tracker) might need to replace the
+     * default GPIO behavior with something a bit more complex.
+     *
+     * We (cruftily) make it static so that variant.cpp can access it without needing a ptr to the TFTDisplay instance.
+     */
+    static GpioPin *backlightEnable;
+
   protected:
     // the header size of the buffer used, e.g. for the SPI command header
     virtual int getBufferOffset(void) override { return 0; }

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -0,0 +1,440 @@
+#include "OLEDDisplayFontsPL.h"
+
+// Font generated or edited with the glyphEditor
+const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
+    0x0A, // Width: 10
+    0x0D, // Height: 13
+    0x20, // First char: 32
+    0xE0, // Number of chars: 224
+
+    // Jump Table:
+    0xFF, 0xFF, 0x00, 0x03, // 32:65535
+    0x00, 0x00, 0x04, 0x03, // 33
+    0x00, 0x04, 0x05, 0x04, // 34
+    0x00, 0x09, 0x09, 0x06, // 35
+    0x00, 0x12, 0x0A, 0x06, // 36
+    0x00, 0x1C, 0x10, 0x09, // 37
+    0x00, 0x2C, 0x0E, 0x08, // 38
+    0x00, 0x3A, 0x01, 0x02, // 39
+    0x00, 0x3B, 0x06, 0x04, // 40
+    0x00, 0x41, 0x06, 0x04, // 41
+    0x00, 0x47, 0x05, 0x04, // 42
+    0x00, 0x4C, 0x09, 0x06, // 43
+    0x00, 0x55, 0x04, 0x03, // 44
+    0x00, 0x59, 0x03, 0x03, // 45
+    0x00, 0x5C, 0x04, 0x03, // 46
+    0x00, 0x60, 0x05, 0x04, // 47
+    0x00, 0x65, 0x0A, 0x06, // 48
+    0x00, 0x6F, 0x08, 0x05, // 49
+    0x00, 0x77, 0x0A, 0x06, // 50
+    0x00, 0x81, 0x0A, 0x06, // 51
+    0x00, 0x8B, 0x0B, 0x07, // 52
+    0x00, 0x96, 0x0A, 0x06, // 53
+    0x00, 0xA0, 0x0A, 0x06, // 54
+    0x00, 0xAA, 0x09, 0x06, // 55
+    0x00, 0xB3, 0x0A, 0x06, // 56
+    0x00, 0xBD, 0x0A, 0x06, // 57
+    0x00, 0xC7, 0x04, 0x03, // 58
+    0x00, 0xCB, 0x04, 0x03, // 59
+    0x00, 0xCF, 0x0A, 0x06, // 60
+    0x00, 0xD9, 0x09, 0x06, // 61
+    0x00, 0xE2, 0x09, 0x06, // 62
+    0x00, 0xEB, 0x0B, 0x07, // 63
+    0x00, 0xF6, 0x14, 0x0B, // 64
+    0x01, 0x0A, 0x0E, 0x08, // 65
+    0x01, 0x18, 0x0C, 0x07, // 66
+    0x01, 0x24, 0x0C, 0x07, // 67
+    0x01, 0x30, 0x0B, 0x07, // 68
+    0x01, 0x3B, 0x0C, 0x07, // 69
+    0x01, 0x47, 0x09, 0x06, // 70
+    0x01, 0x50, 0x0D, 0x08, // 71
+    0x01, 0x5D, 0x0C, 0x07, // 72
+    0x01, 0x69, 0x04, 0x03, // 73
+    0x01, 0x6D, 0x08, 0x05, // 74
+    0x01, 0x75, 0x0E, 0x08, // 75
+    0x01, 0x83, 0x0C, 0x07, // 76
+    0x01, 0x8F, 0x10, 0x09, // 77
+    0x01, 0x9F, 0x0C, 0x07, // 78
+    0x01, 0xAB, 0x0E, 0x08, // 79
+    0x01, 0xB9, 0x0B, 0x07, // 80
+    0x01, 0xC4, 0x0E, 0x08, // 81
+    0x01, 0xD2, 0x0C, 0x07, // 82
+    0x01, 0xDE, 0x0C, 0x07, // 83
+    0x01, 0xEA, 0x0B, 0x07, // 84
+    0x01, 0xF5, 0x0C, 0x07, // 85
+    0x02, 0x01, 0x0D, 0x08, // 86
+    0x02, 0x0E, 0x11, 0x0A, // 87
+    0x02, 0x1F, 0x0E, 0x08, // 88
+    0x02, 0x2D, 0x0D, 0x08, // 89
+    0x02, 0x3A, 0x0C, 0x07, // 90
+    0x02, 0x46, 0x06, 0x04, // 91
+    0x02, 0x4C, 0x06, 0x04, // 92
+    0x02, 0x52, 0x04, 0x03, // 93
+    0x02, 0x56, 0x09, 0x06, // 94
+    0x02, 0x5F, 0x0C, 0x07, // 95
+    0x02, 0x6B, 0x03, 0x03, // 96
+    0x02, 0x6E, 0x0A, 0x06, // 97
+    0x02, 0x78, 0x0A, 0x06, // 98
+    0x02, 0x82, 0x0A, 0x06, // 99
+    0x02, 0x8C, 0x0A, 0x06, // 100
+    0x02, 0x96, 0x0A, 0x06, // 101
+    0x02, 0xA0, 0x05, 0x04, // 102
+    0x02, 0xA5, 0x0A, 0x06, // 103
+    0x02, 0xAF, 0x0A, 0x06, // 104
+    0x02, 0xB9, 0x04, 0x03, // 105
+    0x02, 0xBD, 0x04, 0x03, // 106
+    0x02, 0xC1, 0x08, 0x05, // 107
+    0x02, 0xC9, 0x04, 0x03, // 108
+    0x02, 0xCD, 0x10, 0x09, // 109
+    0x02, 0xDD, 0x0A, 0x06, // 110
+    0x02, 0xE7, 0x0A, 0x06, // 111
+    0x02, 0xF1, 0x0A, 0x06, // 112
+    0x02, 0xFB, 0x0A, 0x06, // 113
+    0x03, 0x05, 0x05, 0x04, // 114
+    0x03, 0x0A, 0x08, 0x05, // 115
+    0x03, 0x12, 0x06, 0x04, // 116
+    0x03, 0x18, 0x0A, 0x06, // 117
+    0x03, 0x22, 0x09, 0x06, // 118
+    0x03, 0x2B, 0x0E, 0x08, // 119
+    0x03, 0x39, 0x0A, 0x06, // 120
+    0x03, 0x43, 0x09, 0x06, // 121
+    0x03, 0x4C, 0x0A, 0x06, // 122
+    0x03, 0x56, 0x06, 0x04, // 123
+    0x03, 0x5C, 0x04, 0x03, // 124
+    0x03, 0x60, 0x05, 0x04, // 125
+    0x03, 0x65, 0x09, 0x06, // 126
+    0xFF, 0xFF, 0x00, 0x0A, // 127
+    0xFF, 0xFF, 0x00, 0x0A, // 128
+    0x03, 0x6E, 0x0C, 0x07, // 129
+    0x03, 0x7A, 0x05, 0x04, // 130
+    0x03, 0x7F, 0x0C, 0x07, // 131
+    0x03, 0x8B, 0x0E, 0x08, // 132
+    0x03, 0x99, 0x0C, 0x07, // 133
+    0x03, 0xA5, 0x0C, 0x07, // 134
+    0x03, 0xB1, 0x0A, 0x06, // 135
+    0x03, 0xBB, 0x0A, 0x06, // 136
+    0x03, 0xC5, 0x0A, 0x06, // 137
+    0xFF, 0xFF, 0x00, 0x0A, // 138
+    0xFF, 0xFF, 0x00, 0x0A, // 139
+    0xFF, 0xFF, 0x00, 0x0A, // 140
+    0xFF, 0xFF, 0x00, 0x0A, // 141
+    0xFF, 0xFF, 0x00, 0x0A, // 142
+    0xFF, 0xFF, 0x00, 0x0A, // 143
+    0xFF, 0xFF, 0x00, 0x0A, // 144
+    0xFF, 0xFF, 0x00, 0x0A, // 145
+    0xFF, 0xFF, 0x00, 0x0A, // 146
+    0x03, 0xCF, 0x0E, 0x08, // 147
+    0x03, 0xDD, 0x0A, 0x06, // 148
+    0xFF, 0xFF, 0x00, 0x0A, // 149
+    0xFF, 0xFF, 0x00, 0x0A, // 150
+    0xFF, 0xFF, 0x00, 0x0A, // 151
+    0x03, 0xE7, 0x0C, 0x07, // 152
+    0x03, 0xF3, 0x0C, 0x07, // 153
+    0x03, 0xFF, 0x0C, 0x07, // 154
+    0x04, 0x0B, 0x08, 0x05, // 155
+    0xFF, 0xFF, 0x00, 0x0A, // 156
+    0xFF, 0xFF, 0x00, 0x0A, // 157
+    0xFF, 0xFF, 0x00, 0x0A, // 158
+    0xFF, 0xFF, 0x00, 0x0A, // 159
+    0xFF, 0xFF, 0x00, 0x0A, // 160
+    0x04, 0x13, 0x04, 0x03, // 161
+    0x04, 0x17, 0x0A, 0x06, // 162
+    0x04, 0x21, 0x0C, 0x07, // 163
+    0x04, 0x2D, 0x0A, 0x06, // 164
+    0x04, 0x37, 0x0A, 0x06, // 165
+    0x04, 0x41, 0x04, 0x03, // 166
+    0x04, 0x45, 0x0A, 0x06, // 167
+    0x04, 0x4F, 0x05, 0x04, // 168
+    0x04, 0x54, 0x0D, 0x08, // 169
+    0x04, 0x61, 0x07, 0x05, // 170
+    0x04, 0x68, 0x0A, 0x06, // 171
+    0x04, 0x72, 0x09, 0x06, // 172
+    0x04, 0x7B, 0x03, 0x03, // 173
+    0x04, 0x7E, 0x0D, 0x08, // 174
+    0x04, 0x8B, 0x0B, 0x07, // 175
+    0x04, 0x96, 0x07, 0x05, // 176
+    0x04, 0x9D, 0x0A, 0x06, // 177
+    0x04, 0xA7, 0x05, 0x04, // 178
+    0x04, 0xAC, 0x05, 0x04, // 179
+    0x04, 0xB1, 0x05, 0x04, // 180
+    0x04, 0xB6, 0x0A, 0x06, // 181
+    0x04, 0xC0, 0x09, 0x06, // 182
+    0x04, 0xC9, 0x03, 0x03, // 183
+    0x04, 0xCC, 0x06, 0x04, // 184
+    0x04, 0xD2, 0x0C, 0x07, // 185
+    0x04, 0xDE, 0x07, 0x05, // 186
+    0x04, 0xE5, 0x0C, 0x07, // 187
+    0x04, 0xF1, 0x0A, 0x06, // 188
+    0x04, 0xFB, 0x10, 0x09, // 189
+    0x05, 0x0B, 0x10, 0x09, // 190
+    0x05, 0x1B, 0x0A, 0x06, // 191
+    0x05, 0x25, 0x0E, 0x08, // 192
+    0x05, 0x33, 0x0E, 0x08, // 193
+    0x05, 0x41, 0x0E, 0x08, // 194
+    0x05, 0x4F, 0x0E, 0x08, // 195
+    0x05, 0x5D, 0x0E, 0x08, // 196
+    0x05, 0x6B, 0x0E, 0x08, // 197
+    0x05, 0x79, 0x12, 0x0A, // 198
+    0x05, 0x8B, 0x0C, 0x07, // 199
+    0x05, 0x97, 0x0C, 0x07, // 200
+    0x05, 0xA3, 0x0C, 0x07, // 201
+    0x05, 0xAF, 0x0C, 0x07, // 202
+    0x05, 0xBB, 0x0C, 0x07, // 203
+    0x05, 0xC7, 0x05, 0x04, // 204
+    0x05, 0xCC, 0x04, 0x03, // 205
+    0x05, 0xD0, 0x04, 0x03, // 206
+    0x05, 0xD4, 0x05, 0x04, // 207
+    0x05, 0xD9, 0x0B, 0x07, // 208
+    0x05, 0xE4, 0x0C, 0x07, // 209
+    0x05, 0xF0, 0x0E, 0x08, // 210
+    0x05, 0xFE, 0x0E, 0x08, // 211
+    0x06, 0x0C, 0x0E, 0x08, // 212
+    0x06, 0x1A, 0x0E, 0x08, // 213
+    0x06, 0x28, 0x0E, 0x08, // 214
+    0x06, 0x36, 0x0A, 0x06, // 215
+    0x06, 0x40, 0x0D, 0x08, // 216
+    0x06, 0x4D, 0x0C, 0x07, // 217
+    0x06, 0x59, 0x0C, 0x07, // 218
+    0x06, 0x65, 0x0C, 0x07, // 219
+    0x06, 0x71, 0x0C, 0x07, // 220
+    0x06, 0x7D, 0x0D, 0x08, // 221
+    0x06, 0x8A, 0x0B, 0x07, // 222
+    0x06, 0x95, 0x0C, 0x07, // 223
+    0x06, 0xA1, 0x0A, 0x06, // 224
+    0x06, 0xAB, 0x0A, 0x06, // 225
+    0x06, 0xB5, 0x0A, 0x06, // 226
+    0x06, 0xBF, 0x0A, 0x06, // 227
+    0x06, 0xC9, 0x0A, 0x06, // 228
+    0x06, 0xD3, 0x0A, 0x06, // 229
+    0x06, 0xDD, 0x10, 0x09, // 230
+    0x06, 0xED, 0x0A, 0x06, // 231
+    0x06, 0xF7, 0x0A, 0x06, // 232
+    0x07, 0x01, 0x0A, 0x06, // 233
+    0x07, 0x0B, 0x0A, 0x06, // 234
+    0x07, 0x15, 0x0A, 0x06, // 235
+    0x07, 0x1F, 0x05, 0x04, // 236
+    0x07, 0x24, 0x04, 0x03, // 237
+    0x07, 0x28, 0x05, 0x04, // 238
+    0x07, 0x2D, 0x05, 0x04, // 239
+    0x07, 0x32, 0x0A, 0x06, // 240
+    0x07, 0x3C, 0x0A, 0x06, // 241
+    0x07, 0x46, 0x0A, 0x06, // 242
+    0x07, 0x50, 0x0A, 0x06, // 243
+    0x07, 0x5A, 0x0A, 0x06, // 244
+    0x07, 0x64, 0x0A, 0x06, // 245
+    0x07, 0x6E, 0x0A, 0x06, // 246
+    0x07, 0x78, 0x09, 0x06, // 247
+    0x07, 0x81, 0x0A, 0x06, // 248
+    0x07, 0x8B, 0x0A, 0x06, // 249
+    0x07, 0x95, 0x0A, 0x06, // 250
+    0x07, 0x9F, 0x0A, 0x06, // 251
+    0x07, 0xA9, 0x0A, 0x06, // 252
+    0x07, 0xB3, 0x09, 0x06, // 253
+    0x07, 0xBC, 0x0A, 0x06, // 254
+    0x07, 0xC6, 0x09, 0x06, // 255
+    // Font Data:
+    0x00, 0x00, 0xF8, 0x02,                                                                                                 // 33
+    0x38, 0x00, 0x00, 0x00, 0x38,                                                                                           // 34
+    0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8,                                                                   // 35
+    0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01,                                                             // 36
+    0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01,                         // 37
+    0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02,                                     // 38
+    0x38,                                                                                                                   // 39
+    0xE0, 0x03, 0x10, 0x04, 0x08, 0x08,                                                                                     // 40
+    0x08, 0x08, 0x10, 0x04, 0xE0, 0x03,                                                                                     // 41
+    0x28, 0x00, 0x18, 0x00, 0x28,                                                                                           // 42
+    0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40,                                                                   // 43
+    0x00, 0x00, 0x00, 0x06,                                                                                                 // 44
+    0x80, 0x00, 0x80,                                                                                                       // 45
+    0x00, 0x00, 0x00, 0x02,                                                                                                 // 46
+    0x00, 0x03, 0xE0, 0x00, 0x18,                                                                                           // 47
+    0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                                             // 48
+    0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                                         // 49
+    0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02,                                                             // 50
+    0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 51
+    0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80,                                                       // 52
+    0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01,                                                             // 53
+    0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01,                                                             // 54
+    0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08,                                                                   // 55
+    0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 56
+    0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01,                                                             // 57
+    0x00, 0x00, 0x20, 0x02,                                                                                                 // 58
+    0x00, 0x00, 0x20, 0x06,                                                                                                 // 59
+    0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 60
+    0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0,                                                                   // 61
+    0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                                                   // 62
+    0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30,                                                       // 63
+    0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 65
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                                                 // 66
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 67
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0,                                                       // 68
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 69
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08,                                                                   // 70
+    0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0,                                           // 71
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 72
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 73
+    0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                                         // 74
+    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 75
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 76
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03,                         // 77
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                                                 // 78
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 79
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                       // 80
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02,                                     // 81
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03,                                                 // 82
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                                                 // 83
+    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                                       // 84
+    0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 85
+    0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08,                                           // 86
+    0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18,                   // 87
+    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 88
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                                           // 89
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 90
+    0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08,                                                                                     // 91
+    0x18, 0x00, 0xE0, 0x00, 0x00, 0x03,                                                                                     // 92
+    0x08, 0x08, 0xF8, 0x0F,                                                                                                 // 93
+    0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40,                                                                   // 94
+    0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08,                                                 // 95
+    0x08, 0x00, 0x10,                                                                                                       // 96
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,                                                             // 97
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 98
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01,                                                             // 99
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03,                                                             // 100
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                                                             // 101
+    0x20, 0x00, 0xF0, 0x03, 0x28,                                                                                           // 102
+    0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07,                                                             // 103
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 104
+    0x00, 0x00, 0xE8, 0x03,                                                                                                 // 105
+    0x00, 0x08, 0xE8, 0x07,                                                                                                 // 106
+    0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02,                                                                         // 107
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 108
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                         // 109
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 110
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 111
+    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 112
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F,                                                             // 113
+    0x00, 0x00, 0xE0, 0x03, 0x20,                                                                                           // 114
+    0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01,                                                                         // 115
+    0x20, 0x00, 0xF8, 0x03, 0x20, 0x02,                                                                                     // 116
+    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 117
+    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20,                                                                   // 118
+    0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01,                                     // 119
+    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                             // 120
+    0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20,                                                                   // 121
+    0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 122
+    0x80, 0x00, 0x78, 0x0F, 0x08, 0x08,                                                                                     // 123
+    0x00, 0x00, 0xF8, 0x0F,                                                                                                 // 124
+    0x08, 0x08, 0x78, 0x0F, 0x80,                                                                                           // 125
+    0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0,                                                                   // 126
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x20, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 129
+    0x40, 0x00, 0xF8, 0x03, 0x20,                                                                                           // 130
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x44, 0x00, 0x82, 0x01, 0xF8, 0x03,                                                 // 131
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x05, 0x00, 0x0A,                                     // 132
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x07, 0x00, 0x08,                                                 // 133
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x10, 0x01,                                                 // 134
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0x44, 0x01,                                                             // 135
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 136
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x64, 0x02, 0x20, 0x02,                                                             // 137
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 147
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 148
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x06, 0x48, 0x0A,                                                 // 152
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x06, 0x00, 0x08,                                                 // 153
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x90, 0x01,                                                 // 154
+    0x40, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0x24, 0x01,                                                                         // 155
+    0x00, 0x00, 0xA0, 0x0F,                                                                                                 // 161
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01,                                                             // 162
+    0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02,                                                 // 163
+    0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01,                                                             // 164
+    0x48, 0x01, 0x70, 0x01, 0xC0, 0x03, 0x70, 0x01, 0x48, 0x01,                                                             // 165
+    0x00, 0x00, 0x38, 0x0F,                                                                                                 // 166
+    0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05,                                                             // 167
+    0x08, 0x00, 0x00, 0x00, 0x08,                                                                                           // 168
+    0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0,                                           // 169
+    0x68, 0x00, 0x68, 0x00, 0x68, 0x00, 0x78,                                                                               // 170
+    0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02,                                                             // 171
+    0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0,                                                                   // 172
+    0x80, 0x00, 0x80,                                                                                                       // 173
+    0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0,                                           // 174
+    0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                       // 175
+    0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38,                                                                               // 176
+    0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02,                                                             // 177
+    0x48, 0x00, 0x68, 0x00, 0x58,                                                                                           // 178
+    0x48, 0x00, 0x58, 0x00, 0x68,                                                                                           // 179
+    0x00, 0x00, 0x10, 0x00, 0x08,                                                                                           // 180
+    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 181
+    0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08,                                                                   // 182
+    0x00, 0x00, 0x40,                                                                                                       // 183
+    0x00, 0x00, 0x00, 0x14, 0x00, 0x18,                                                                                     // 184
+    0x08, 0x03, 0x88, 0x02, 0xCA, 0x02, 0x69, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 185
+    0x30, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                                               // 186
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x6A, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 187
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 188
+    0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02,                         // 189
+    0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01,                         // 190
+    0x00, 0x00, 0x00, 0x06, 0x00, 0x09, 0xA0, 0x09, 0x00, 0x04,                                                             // 191
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 192
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 193
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 194
+    0x00, 0x02, 0xC2, 0x01, 0xB1, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 195
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x88, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 196
+    0x00, 0x02, 0xC0, 0x01, 0xBE, 0x00, 0x8A, 0x00, 0xBE, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 197
+    0x00, 0x03, 0xC0, 0x00, 0xE0, 0x00, 0x98, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,             // 198
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x16, 0x08, 0x1A, 0x10, 0x01,                                                 // 199
+    0x00, 0x00, 0xF8, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 200
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x48, 0x02,                                                 // 201
+    0x00, 0x00, 0xFA, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 202
+    0x00, 0x00, 0xF8, 0x03, 0x4A, 0x02, 0x48, 0x02, 0x4A, 0x02, 0x48, 0x02,                                                 // 203
+    0x00, 0x00, 0xF9, 0x03, 0x02,                                                                                           // 204
+    0x02, 0x00, 0xF9, 0x03,                                                                                                 // 205
+    0x01, 0x00, 0xFA, 0x03,                                                                                                 // 206
+    0x02, 0x00, 0xF8, 0x03, 0x02,                                                                                           // 207
+    0x40, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x10, 0x01, 0xE0,                                                       // 208
+    0x00, 0x00, 0xFA, 0x03, 0x31, 0x00, 0x42, 0x00, 0x81, 0x01, 0xF8, 0x03,                                                 // 209
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 210
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 211
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0xF0, 0x01,                                     // 212
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 213
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 214
+    0x10, 0x01, 0xA0, 0x00, 0xE0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 215
+    0x00, 0x00, 0xF0, 0x02, 0x08, 0x03, 0xC8, 0x02, 0x28, 0x02, 0x18, 0x03, 0xE8,                                           // 216
+    0x00, 0x00, 0xF8, 0x01, 0x01, 0x02, 0x02, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 217
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 218
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 219
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x00, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 220
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC2, 0x03, 0x21, 0x00, 0x10, 0x00, 0x08,                                           // 221
+    0x00, 0x00, 0xF8, 0x03, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xE0,                                                       // 222
+    0x00, 0x00, 0xF0, 0x03, 0x08, 0x01, 0x48, 0x02, 0xB0, 0x02, 0x80, 0x01,                                                 // 223
+    0x00, 0x00, 0x00, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE0, 0x03,                                                             // 224
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE0, 0x03,                                                             // 225
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE8, 0x03,                                                             // 226
+    0x00, 0x00, 0x08, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE4, 0x03,                                                             // 227
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xE8, 0x03,                                                             // 228
+    0x00, 0x00, 0x00, 0x03, 0xAE, 0x02, 0xAA, 0x02, 0xEE, 0x03,                                                             // 229
+    0x00, 0x00, 0x40, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                         // 230
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x16, 0x20, 0x1A, 0x40, 0x01,                                                             // 231
+    0x00, 0x00, 0xC0, 0x01, 0xA4, 0x02, 0xA8, 0x02, 0xC0, 0x02,                                                             // 232
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC0, 0x02,                                                             // 233
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC8, 0x02,                                                             // 234
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xC8, 0x02,                                                             // 235
+    0x00, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 236
+    0x08, 0x00, 0xE4, 0x03,                                                                                                 // 237
+    0x08, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 238
+    0x08, 0x00, 0xE0, 0x03, 0x08,                                                                                           // 239
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x38, 0x02, 0xE0, 0x01,                                                             // 240
+    0x00, 0x00, 0xE8, 0x03, 0x24, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 241
+    0x00, 0x00, 0xC0, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC0, 0x01,                                                             // 242
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC0, 0x01,                                                             // 243
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC8, 0x01,                                                             // 244
+    0x00, 0x00, 0xC8, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 245
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x20, 0x02, 0xC8, 0x01,                                                             // 246
+    0x40, 0x00, 0x40, 0x00, 0x50, 0x01, 0x40, 0x00, 0x40,                                                                   // 247
+    0x00, 0x00, 0xC0, 0x02, 0xA0, 0x03, 0x60, 0x02, 0xA0, 0x01,                                                             // 248
+    0x00, 0x00, 0xE0, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 249
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x04, 0x02, 0xE0, 0x03,                                                             // 250
+    0x00, 0x00, 0xE8, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 251
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x00, 0x02, 0xE8, 0x03,                                                             // 252
+    0x20, 0x00, 0xC0, 0x09, 0x08, 0x06, 0xC4, 0x01, 0x20,                                                                   // 253
+    0x00, 0x00, 0xF8, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 254
+    0x20, 0x00, 0xC8, 0x09, 0x00, 0x06, 0xC8, 0x01, 0x20,                                                                   // 255
+};

src/graphics/fonts/OLEDDisplayFontsPL.h

@@ -0,0 +1,11 @@
+#ifndef OLEDDISPLAYFONTSPL_h
+#define OLEDDISPLAYFONTSPL_h
+
+#ifdef ARDUINO
+#include <Arduino.h>
+#elif __MBED__
+#define PROGMEM
+#endif
+
+extern const uint8_t ArialMT_Plain_10_PL[] PROGMEM;
+#endif

src/graphics/images.h

@@ -20,8 +20,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/input/InputBroker.h

@@ -4,6 +4,20 @@
 #define ANYKEY 0xFF
 #define MATRIXKEY 0xFE
 
+#define INPUT_BROKER_MSG_BRIGHTNESS_UP 0x11
+#define INPUT_BROKER_MSG_BRIGHTNESS_DOWN 0x12
+#define INPUT_BROKER_MSG_REBOOT 0x90
+#define INPUT_BROKER_MSG_SHUTDOWN 0x9b
+#define INPUT_BROKER_MSG_GPS_TOGGLE 0x9e
+#define INPUT_BROKER_MSG_MUTE_TOGGLE 0xac
+#define INPUT_BROKER_MSG_SEND_PING 0xaf
+#define INPUT_BROKER_MSG_LEFT 0xb4
+#define INPUT_BROKER_MSG_UP 0xb5
+#define INPUT_BROKER_MSG_DOWN 0xb6
+#define INPUT_BROKER_MSG_RIGHT 0xb7
+#define INPUT_BROKER_MSG_FN_SYMBOL_ON 0xf1
+#define INPUT_BROKER_MSG_FN_SYMBOL_OFF 0xf2
+
 typedef struct _InputEvent {
     const char *source;
     char inputEvent;

src/input/LinuxInput.cpp

@@ -147,11 +147,11 @@ int32_t LinuxInput::runOnce()
                     case KEY_LEFT: // Left
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
                         break;
-                        e.kbchar = 0xb4;
+                        e.kbchar = INPUT_BROKER_MSG_LEFT;
                     case KEY_RIGHT: // Right
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
                         break;
-                        e.kbchar = 0xb7;
+                        e.kbchar = INPUT_BROKER_MSG_RIGHT;
                     case KEY_ENTER: // Enter
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
                         break;

src/input/SerialKeyboard.cpp

@@ -87,7 +87,7 @@ int32_t SerialKeyboard::runOnce()
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
             } else if (!(shiftRegister2 & (1 << 2))) {
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-                e.kbchar = 0xb7;
+                e.kbchar = INPUT_BROKER_MSG_RIGHT;
             } else if (!(shiftRegister2 & (1 << 1))) {
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
             } else if (!(shiftRegister2 & (1 << 0))) {

src/input/cardKbI2cImpl.cpp

@@ -9,7 +9,7 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {}
 
 void CardKbI2cImpl::init()
 {
-#ifndef ARCH_PORTDUINO
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO)
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescanning for I2C keyboard\n");
         uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR};
@@ -57,4 +57,4 @@ void CardKbI2cImpl::init()
     }
 #endif
     inputBroker->registerSource(this);
-}
+}

src/input/kbI2cBase.cpp

@@ -94,7 +94,7 @@ int32_t KbI2cBase::runOnce()
                 case 'e': // sym e
                     if (is_sym) {
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-                        e.kbchar = 0xb5;
+                        e.kbchar = INPUT_BROKER_MSG_UP;
                         is_sym = false; // reset sym state after second keypress
                     } else {
                         e.inputEvent = ANYKEY;
@@ -104,7 +104,7 @@ int32_t KbI2cBase::runOnce()
                 case 'x': // sym x
                     if (is_sym) {
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-                        e.kbchar = 0xb6;
+                        e.kbchar = INPUT_BROKER_MSG_DOWN;
                         is_sym = false; // reset sym state after second keypress
                     } else {
                         e.inputEvent = ANYKEY;
@@ -134,8 +134,8 @@ int32_t KbI2cBase::runOnce()
                 case 0x13: // Code scanner says the SYM key is 0x13
                     is_sym = !is_sym;
                     e.inputEvent = ANYKEY;
-                    e.kbchar =
-                        is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
+                    e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON   // send 0xf1 to tell CannedMessages to display that
+                                      : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // the modifier key is active
                     break;
                 case 0x0a: // apparently Enter on Q10 is a line feed instead of carriage return
                     e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
@@ -214,7 +214,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0xac; // mute notifications
+                    e.kbchar = INPUT_BROKER_MSG_MUTE_TOGGLE; // mute notifications
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -224,7 +224,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x11; // Increase Brightness code
+                    e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_UP; // Increase Brightness code
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -234,7 +234,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x12; // Decrease Brightness code
+                    e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_DOWN; // Decrease Brightness code
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -244,7 +244,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0xaf; // (fn + space)
+                    e.kbchar = INPUT_BROKER_MSG_SEND_PING; // (fn + space)
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -254,7 +254,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x9e;
+                    e.kbchar = INPUT_BROKER_MSG_GPS_TOGGLE;
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -269,32 +269,33 @@ int32_t KbI2cBase::runOnce()
                 break;
             case 0xb5: // Up
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-                e.kbchar = 0xb5;
+                e.kbchar = INPUT_BROKER_MSG_UP;
                 break;
             case 0xb6: // Down
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-                e.kbchar = 0xb6;
+                e.kbchar = INPUT_BROKER_MSG_DOWN;
                 break;
             case 0xb4: // Left
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
-                e.kbchar = 0xb4;
+                e.kbchar = INPUT_BROKER_MSG_LEFT;
                 break;
             case 0xb7: // Right
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-                e.kbchar = 0xb7;
+                e.kbchar = INPUT_BROKER_MSG_RIGHT;
                 break;
             case 0xc: // Modifier key: 0xc is alt+c (Other options could be: 0xea = shift+mic button or 0x4 shift+$(speaker))
                 // toggle moddifiers button.
                 is_sym = !is_sym;
                 e.inputEvent = ANYKEY;
-                e.kbchar = is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
+                e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON   // send 0xf1 to tell CannedMessages to display that the
+                                  : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // modifier key is active
                 break;
-            case 0x90: // fn+r
+            case 0x90: // fn+r      INPUT_BROKER_MSG_REBOOT
             case 0x91: // fn+t
-            case 0x9b: // fn+s
-            case 0xac: // fn+m
-            case 0x9e: // fn+g
-            case 0xaf: // fn+space
+            case 0x9b: // fn+s      INPUT_BROKER_MSG_SHUTDOWN
+            case 0xac: // fn+m      INPUT_BROKER_MSG_MUTE_TOGGLE
+            case 0x9e: // fn+g      INPUT_BROKER_MSG_GPS_TOGGLE
+            case 0xaf: // fn+space  INPUT_BROKER_MSG_SEND_PING
                 // just pass those unmodified
                 e.inputEvent = ANYKEY;
                 e.kbchar = c;

src/main.cpp

@@ -224,6 +224,11 @@ __attribute__((weak, noinline)) bool loopCanSleep()
     return true;
 }
 
+// Weak empty variant initialization function.
+// May be redefined by variant files.
+void lateInitVariant() __attribute__((weak));
+void lateInitVariant() {}
+
 /**
  * Print info as a structured log message (for automated log processing)
  */
@@ -257,6 +262,12 @@ void setup()
 
 #ifdef DEBUG_PORT
     consoleInit(); // Set serial baud rate and init our mesh console
+#endif
+#if ARCH_PORTDUINO
+    struct timeval tv;
+    tv.tv_sec = time(NULL);
+    tv.tv_usec = 0;
+    perhapsSetRTC(RTCQualityNTP, &tv);
 #endif
     powerMonInit();
 
@@ -278,29 +289,9 @@ void setup()
     digitalWrite(LORA_TCXO_GPIO, HIGH);
 #endif
 
-#if defined(VEXT_ENABLE_V03)
-    pinMode(VEXT_ENABLE_V03, OUTPUT);
-    pinMode(ST7735_BL_V03, OUTPUT);
-    digitalWrite(VEXT_ENABLE_V03, 0); // turn on the display power and antenna boost
-    digitalWrite(ST7735_BL_V03, 1);   // display backligth on
-    LOG_DEBUG("HELTEC Detect Tracker V1.0\n");
-#elif defined(VEXT_ENABLE_V05)
-    pinMode(VEXT_ENABLE_V05, OUTPUT);
-    pinMode(ST7735_BL_V05, OUTPUT);
-    digitalWrite(VEXT_ENABLE_V05, 1); // turn on the lora antenna boost
-    digitalWrite(ST7735_BL_V05, 1);   // turn on display backligth
-    LOG_DEBUG("HELTEC Detect Tracker V1.1\n");
-#elif defined(VEXT_ENABLE) && defined(VEXT_ON_VALUE)
+#if defined(VEXT_ENABLE)
     pinMode(VEXT_ENABLE, OUTPUT);
     digitalWrite(VEXT_ENABLE, VEXT_ON_VALUE); // turn on the display power
-#elif defined(VEXT_ENABLE)
-    pinMode(VEXT_ENABLE, OUTPUT);
-    digitalWrite(VEXT_ENABLE, 0); // turn on the display power
-#endif
-
-#if defined(VTFT_CTRL_V03)
-    pinMode(VTFT_CTRL_V03, OUTPUT);
-    digitalWrite(VTFT_CTRL_V03, LOW);
 #endif
 
 #if defined(VTFT_CTRL)
@@ -399,7 +390,7 @@ void setup()
 #endif
 
 #ifdef AQ_SET_PIN
-    // RAK-12039 set pin for Air quality sensor
+    // RAK-12039 set pin for Air quality sensor. Detectable on I2C after ~3 seconds, so we need to rescan later
     pinMode(AQ_SET_PIN, OUTPUT);
     digitalWrite(AQ_SET_PIN, HIGH);
 #endif
@@ -556,6 +547,7 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_680, meshtastic_TelemetrySensorType_BME680)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_280, meshtastic_TelemetrySensorType_BME280)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_280, meshtastic_TelemetrySensorType_BMP280)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_3XX, meshtastic_TelemetrySensorType_BMP3XX)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_085, meshtastic_TelemetrySensorType_BMP085)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA260, meshtastic_TelemetrySensorType_INA260)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA219, meshtastic_TelemetrySensorType_INA219)
@@ -568,6 +560,7 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC6310, meshtastic_TelemetrySensorType_QMC6310)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::HMC5883L, meshtastic_TelemetrySensorType_QMC5883L)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::RCWL9620, meshtastic_TelemetrySensorType_RCWL9620)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::VEML7700, meshtastic_TelemetrySensorType_VEML7700)
@@ -594,6 +587,9 @@ void setup()
 
     // Hello
     printInfo();
+#ifdef BUILD_EPOCH
+    LOG_INFO("Build timestamp: %ld\n", BUILD_EPOCH);
+#endif
 
 #ifdef ARCH_ESP32
     esp32Setup();
@@ -643,8 +639,6 @@ void setup()
 #if !MESHTASTIC_EXCLUDE_I2C
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
-        config.display.wake_on_tap_or_motion = true;
-        moduleConfig.external_notification.enabled = true;
         accelerometerThread = new AccelerometerThread(acc_info.type);
     }
 #endif
@@ -755,8 +749,8 @@ void setup()
 #if !MESHTASTIC_EXCLUDE_I2C
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(HX8357_CS) ||            \
-    defined(USE_ST7789)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) ||            \
+    defined(HX8357_CS) || defined(USE_ST7789)
     screen->setup();
 #elif defined(ARCH_PORTDUINO)
     if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) {
@@ -770,12 +764,6 @@ void setup()
 
     screen->print("Started...\n");
 
-#ifdef SX126X_ANT_SW
-    // make analog PA vs not PA switch on SX126x eval board work properly
-    pinMode(SX126X_ANT_SW, OUTPUT);
-    digitalWrite(SX126X_ANT_SW, 1);
-#endif
-
 #ifdef PIN_PWR_DELAY_MS
     // This may be required to give the peripherals time to power up.
     delay(PIN_PWR_DELAY_MS);
@@ -1023,6 +1011,8 @@ void setup()
         }
     }
 
+    lateInitVariant(); // Do board specific init (see extra_variants/README.md for documentation)
+
 #if !MESHTASTIC_EXCLUDE_MQTT
     mqttInit();
 #endif
@@ -1101,6 +1091,9 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
     deviceMetadata.position_flags = config.position.position_flags;
     deviceMetadata.hw_model = HW_VENDOR;
     deviceMetadata.hasRemoteHardware = moduleConfig.remote_hardware.enabled;
+#if !(MESHTASTIC_EXCLUDE_PKI)
+    deviceMetadata.hasPKC = true;
+#endif
     return deviceMetadata;
 }
 #ifndef PIO_UNIT_TESTING
@@ -1149,4 +1142,4 @@ void loop()
     }
     // if (didWake) LOG_DEBUG("wake!\n");
 }
-#endif
+#endif

src/mesh/Channels.cpp

@@ -13,10 +13,6 @@
 #include "mqtt/MQTT.h"
 #endif
 
-/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128)
-static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59,
-                                     0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01};
-
 Channels channels;
 
 const char *Channels::adminChannel = "admin";

src/mesh/Channels.h

@@ -129,4 +129,12 @@ class Channels
 };
 
 /// Singleton channel table
-extern Channels channels;
+extern Channels channels;
+
+/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128)
+static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59,
+                                     0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01};
+
+static const uint8_t eventpsk[] = {0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36,
+                                   0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74,
+                                   0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1};

src/mesh/CryptoEngine.cpp

@@ -11,6 +11,7 @@
 #include <Curve25519.h>
 #include <SHA256.h>
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
+
 /**
  * Create a public/private key pair with Curve25519.
  *
@@ -24,6 +25,30 @@ void CryptoEngine::generateKeyPair(uint8_t *pubKey, uint8_t *privKey)
     memcpy(pubKey, public_key, sizeof(public_key));
     memcpy(privKey, private_key, sizeof(private_key));
 }
+
+/**
+ * regenerate a public key with Curve25519.
+ *
+ * @param pubKey The destination for the public key.
+ * @param privKey The source for the private key.
+ */
+bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
+{
+    if (!memfll(privKey, 0, sizeof(private_key))) {
+        Curve25519::eval(pubKey, privKey, 0);
+        if (Curve25519::isWeakPoint(pubKey)) {
+            LOG_ERROR("PKI key generation failed. Specified private key results in a weak\n");
+            memset(pubKey, 0, 32);
+            return false;
+        }
+        memcpy(private_key, privKey, sizeof(private_key));
+        memcpy(public_key, pubKey, sizeof(public_key));
+    } else {
+        LOG_WARN("X25519 key generation failed due to blank private key\n");
+        return false;
+    }
+    return true;
+}
 #endif
 void CryptoEngine::clearKeys()
 {
@@ -59,7 +84,7 @@ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, uint64_
 
     // Calculate the shared secret with the destination node and encrypt
     printBytes("Attempting encrypt using nonce: ", nonce, 13);
-    printBytes("Attempting encrypt using shared_key: ", shared_key, 32);
+    printBytes("Attempting encrypt using shared_key starting with: ", shared_key, 8);
     aes_ccm_ae(shared_key, 32, nonce, 8, bytes, numBytes, nullptr, 0, bytesOut,
                auth); // this can write up to 15 bytes longer than numbytes past bytesOut
     *extraNonce = extraNonceTmp;
@@ -92,7 +117,7 @@ bool CryptoEngine::decryptCurve25519(uint32_t fromNode, uint64_t packetNum, size
     }
     initNonce(fromNode, packetNum, *extraNonce);
     printBytes("Attempting decrypt using nonce: ", nonce, 13);
-    printBytes("Attempting decrypt using shared_key: ", shared_key, 32);
+    printBytes("Attempting decrypt using shared_key starting with: ", shared_key, 8);
     return aes_ccm_ad(shared_key, 32, nonce, 8, bytes, numBytes - 12, nullptr, 0, auth, bytesOut);
 }
 
@@ -112,11 +137,12 @@ bool CryptoEngine::setDHKey(uint32_t nodeNum)
         LOG_DEBUG("Node %d or their public_key not found\n", nodeNum);
         return false;
     }
-
+    printBytes("Generating DH with remote pubkey: ", node->user.public_key.bytes, 32);
+    printBytes("And local pubkey: ", config.security.public_key.bytes, 32);
     if (!setDHPublicKey(node->user.public_key.bytes))
         return false;
 
-    printBytes("DH Output: ", shared_key, 32);
+    // printBytes("DH Output: ", shared_key, 32);
 
     /**
      * D.J. Bernstein reccomends hashing the shared key. We want to do this because there are

src/mesh/CryptoEngine.h

@@ -21,6 +21,7 @@ struct CryptoKey {
  */
 
 #define MAX_BLOCKSIZE 256
+#define TEST_CURVE25519_FIELD_OPS // Exposes Curve25519::isWeakPoint() for testing keys
 
 class CryptoEngine
 {
@@ -33,6 +34,8 @@ class CryptoEngine
 #if !(MESHTASTIC_EXCLUDE_PKI)
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
     virtual void generateKeyPair(uint8_t *pubKey, uint8_t *privKey);
+    virtual bool regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey);
+
 #endif
     void clearKeys();
     void setDHPrivateKey(uint8_t *_private_key);

src/mesh/Default.h

@@ -3,6 +3,8 @@
 #include <cstdint>
 #define ONE_DAY 24 * 60 * 60
 #define ONE_MINUTE_MS 60 * 1000
+#define THIRTY_SECONDS_MS 30 * 1000
+#define FIVE_SECONDS_MS 5 * 1000
 
 #define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60)
 #define default_telemetry_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 30 * 60)

src/mesh/LR11x0Interface.cpp

@@ -50,11 +50,23 @@ template <typename T> bool LR11x0Interface<T>::init()
 
     limitPower();
 
+#ifdef TRACKER_T1000_E // Tracker T1000E uses DIO5, DIO6, DIO7, DIO8 for RF switching
+
+    static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7,
+                                                 RADIOLIB_LR11X0_DIO8, RADIOLIB_NC};
+
+    static const Module::RfSwitchMode_t rfswitch_table[] = {
+        // mode             DIO5  DIO6  DIO7  DIO8
+        {LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW, LOW, HIGH}},
+        {LR11x0::MODE_TX, {HIGH, HIGH, LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH, LOW, HIGH}},
+        {LR11x0::MODE_TX_HF, {LOW, LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH, LOW}},
+        {LR11x0::MODE_WIFI, {LOW, LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+    };
+
+#else
+
     // set RF switch configuration for Wio WM1110
     // Wio WM1110 uses DIO5 and DIO6 for RF switching
-    // NOTE: other boards may be different. If you are
-    // using a different board, you may need to wrap
-    // this in a conditional.
 
     static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC,
                                                  RADIOLIB_NC};
@@ -67,6 +79,8 @@ template <typename T> bool LR11x0Interface<T>::init()
         {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
     };
 
+#endif
+
 // We need to do this before begin() call
 #ifdef LR11X0_DIO_AS_RF_SWITCH
     LOG_DEBUG("Setting DIO RF switch\n");
@@ -90,6 +104,13 @@ template <typename T> bool LR11x0Interface<T>::init()
     if (res == RADIOLIB_ERR_CHIP_NOT_FOUND)
         return false;
 
+    LR11x0VersionInfo_t version;
+    res = lora.getVersionInfo(&version);
+    if (res == RADIOLIB_ERR_NONE)
+        LOG_DEBUG("LR11x0 Device %d, HW %d, FW %d.%d, WiFi %d.%d, GNSS %d.%d\n", version.device, version.hardware,
+                  version.fwMajor, version.fwMinor, version.fwMajorWiFi, version.fwMinorWiFi, version.fwGNSS,
+                  version.almanacGNSS);
+
     LOG_INFO("Frequency set to %f\n", getFreq());
     LOG_INFO("Bandwidth set to %f\n", bw);
     LOG_INFO("Power output set to %d\n", power);
@@ -100,13 +121,6 @@ template <typename T> bool LR11x0Interface<T>::init()
     // FIXME: May want to set depending on a definition, currently all LR1110 variant files use the DC-DC regulator option
     if (res == RADIOLIB_ERR_NONE)
         res = lora.setRegulatorDCDC();
-#ifdef TRACKER_T1000_E
-#ifdef LR11X0_DIO_RF_SWITCH_CONFIG
-    res = lora.setDioAsRfSwitch(LR11X0_DIO_RF_SWITCH_CONFIG);
-#else
-    res = lora.setDioAsRfSwitch(0x03, 0x0, 0x01, 0x03, 0x02, 0x0, 0x0, 0x0);
-#endif
-#endif
     if (res == RADIOLIB_ERR_NONE) {
         if (config.lora.sx126x_rx_boosted_gain) { // the name is unfortunate but historically accurate
             res = lora.setRxBoostedGainMode(true);
@@ -225,9 +239,7 @@ template <typename T> void LR11x0Interface<T>::startReceive()
 
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     // Furthermore, we need the PREAMBLE_DETECTED and HEADER_VALID IRQ flag to detect whether we are actively receiving
-    int err = lora.startReceive(
-        RADIOLIB_LR11X0_RX_TIMEOUT_INF, RADIOLIB_LR11X0_IRQ_RX_DONE,
-        0); // only RX_DONE IRQ is needed, we'll check for PREAMBLE_DETECTED and HEADER_VALID in isActivelyReceiving
+    int err = lora.startReceive(RADIOLIB_LR11X0_RX_TIMEOUT_INF, RADIOLIB_IRQ_RX_DEFAULT_FLAGS, RADIOLIB_IRQ_RX_DEFAULT_MASK, 0);
     assert(err == RADIOLIB_ERR_NONE);
 
     RadioLibInterface::startReceive();

src/mesh/LR11x0Interface.h

@@ -25,7 +25,7 @@ template <class T> class LR11x0Interface : public RadioLibInterface
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() override;
 
-    bool isIRQPending() override { return lora.getIrqStatus() != 0; }
+    bool isIRQPending() override { return lora.getIrqFlags() != 0; }
 
   protected:
     /**

src/mesh/MeshPacketQueue.cpp

@@ -1,4 +1,5 @@
 #include "MeshPacketQueue.h"
+#include "NodeDB.h"
 #include "configuration.h"
 #include <assert.h>
 
@@ -16,12 +17,9 @@ bool CompareMeshPacketFunc(const meshtastic_MeshPacket *p1, const meshtastic_Mes
 {
     assert(p1 && p2);
     auto p1p = getPriority(p1), p2p = getPriority(p2);
-
     // If priorities differ, use that
-    // for equal priorities, order by id (older packets have higher priority - this will briefly be wrong when IDs roll over but
-    // no big deal)
-    return (p1p != p2p) ? (p1p < p2p)         // prefer bigger priorities
-                        : (p1->id >= p2->id); // prefer smaller packet ids
+    // for equal priorities, prefer packets already on mesh.
+    return (p1p != p2p) ? (p1p > p2p) : (getFrom(p1) != nodeDB->getNodeNum() && getFrom(p2) == nodeDB->getNodeNum());
 }
 
 MeshPacketQueue::MeshPacketQueue(size_t _maxLen) : maxLen(_maxLen) {}
@@ -39,26 +37,38 @@ void fixPriority(meshtastic_MeshPacket *p)
     // We might receive acks from other nodes (and since generated remotely, they won't have priority assigned.  Check for that
     // and fix it
     if (p->priority == meshtastic_MeshPacket_Priority_UNSET) {
-        // if acks give high priority
         // if a reliable message give a bit higher default priority
-        p->priority = (p->decoded.portnum == meshtastic_PortNum_ROUTING_APP)
-                          ? meshtastic_MeshPacket_Priority_ACK
-                          : (p->want_ack ? meshtastic_MeshPacket_Priority_RELIABLE : meshtastic_MeshPacket_Priority_DEFAULT);
+        p->priority = (p->want_ack ? meshtastic_MeshPacket_Priority_RELIABLE : meshtastic_MeshPacket_Priority_DEFAULT);
+        if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+            // if acks/naks give very high priority
+            if (p->decoded.portnum == meshtastic_PortNum_ROUTING_APP) {
+                p->priority = meshtastic_MeshPacket_Priority_ACK;
+                // if text or admin, give high priority
+            } else if (p->decoded.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP ||
+                       p->decoded.portnum == meshtastic_PortNum_ADMIN_APP) {
+                p->priority = meshtastic_MeshPacket_Priority_HIGH;
+                // if it is a response, give higher priority to let it arrive early and stop the request being relayed
+            } else if (p->decoded.request_id != 0) {
+                p->priority = meshtastic_MeshPacket_Priority_RESPONSE;
+                // Also if we want a response, give a bit higher priority
+            } else if (p->decoded.want_response) {
+                p->priority = meshtastic_MeshPacket_Priority_RELIABLE;
+            }
+        }
     }
 }
 
 /** enqueue a packet, return false if full */
 bool MeshPacketQueue::enqueue(meshtastic_MeshPacket *p)
 {
-    fixPriority(p);
-
     // no space - try to replace a lower priority packet in the queue
     if (queue.size() >= maxLen) {
         return replaceLowerPriorityPacket(p);
     }
 
-    queue.push_back(p);
-    std::push_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc);
+    // Find the correct position using upper_bound to maintain a stable order
+    auto it = std::upper_bound(queue.begin(), queue.end(), p, CompareMeshPacketFunc);
+    queue.insert(it, p); // Insert packet at the found position
     return true;
 }
 
@@ -69,9 +79,7 @@ meshtastic_MeshPacket *MeshPacketQueue::dequeue()
     }
 
     auto *p = queue.front();
-    std::pop_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc);
-    queue.pop_back();
-
+    queue.erase(queue.begin()); // Remove the highest-priority packet
     return p;
 }
 
@@ -92,7 +100,6 @@ meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id)
         auto p = (*it);
         if (getFrom(p) == from && p->id == id) {
             queue.erase(it);
-            std::make_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc);
             return p;
         }
     }
@@ -103,28 +110,21 @@ meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id)
 /** Attempt to find and remove a packet from this queue.  Returns the packet which was removed from the queue */
 bool MeshPacketQueue::replaceLowerPriorityPacket(meshtastic_MeshPacket *p)
 {
-    std::sort_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc); // sort ascending based on priority (0 -> 127)
 
-    // find first packet which does not compare less (in priority) than parameter packet
-    auto low = std::lower_bound(queue.begin(), queue.end(), p, &CompareMeshPacketFunc);
-
-    if (low == queue.begin()) { // if already at start, there are no packets with lower priority
-        return false;
+    if (queue.empty()) {
+        return false; // No packets to replace
+    }
+    // Check if the packet at the back has a lower priority than the new packet
+    auto &backPacket = queue.back();
+    if (backPacket->priority < p->priority) {
+        // Remove the back packet
+        packetPool.release(backPacket);
+        queue.pop_back();
+        // Insert the new packet in the correct order
+        enqueue(p);
+        return true;
     }
 
-    if (low == queue.end()) {
-        // all priorities in the vector are smaller than the incoming packet. Replace the lowest priority (first) element
-        low = queue.begin();
-    } else {
-        // 'low' iterator points to first packet which does not compare less than parameter
-        --low; // iterate to lower priority packet
-    }
-
-    if (getPriority(p) > getPriority(*low)) {
-        packetPool.release(*low); // deallocate and drop the packet we're replacing
-        *low = p;                 // replace low-pri packet at this position with incoming packet with higher priority
-    }
-
-    std::make_heap(queue.begin(), queue.end(), &CompareMeshPacketFunc);
-    return true;
-}
+    // If the back packet's priority is not lower, no replacement occurs
+    return false;
+}

src/mesh/MeshTypes.h

@@ -14,8 +14,9 @@ typedef uint32_t PacketId; // A packet sequence number
     1 // Reserved to only deliver packets over high speed (non-lora) transports, such as MQTT or BLE mesh (not yet implemented)
 #define ERRNO_OK 0
 #define ERRNO_NO_INTERFACES 33
-#define ERRNO_UNKNOWN 32  // pick something that doesn't conflict with RH_ROUTER_ERROR_UNABLE_TO_DELIVER
-#define ERRNO_DISABLED 34 // the interface is disabled
+#define ERRNO_UNKNOWN 32                   // pick something that doesn't conflict with RH_ROUTER_ERROR_UNABLE_TO_DELIVER
+#define ERRNO_DISABLED 34                  // the interface is disabled
+#define ID_COUNTER_MASK (UINT32_MAX >> 22) // mask to select the counter portion of the ID
 
 /*
  * Source of a received message
@@ -47,4 +48,7 @@ extern Allocator<meshtastic_MeshPacket> &packetPool;
  * Most (but not always) of the time we want to treat packets 'from' the local phone (where from == 0), as if they originated on
  * the local node. If from is zero this function returns our node number instead
  */
-NodeNum getFrom(const meshtastic_MeshPacket *p);
+NodeNum getFrom(const meshtastic_MeshPacket *p);
+
+/* Some clients might not properly set priority, therefore we fix it here. */
+void fixPriority(meshtastic_MeshPacket *p);

src/mesh/NodeDB.cpp

@@ -121,6 +121,8 @@ NodeDB::NodeDB()
     owner.hw_model = HW_VENDOR;
     // Ensure user (nodeinfo) role is set to whatever we're configured to
     owner.role = config.device.role;
+    // Ensure macaddr is set to our macaddr as it will be copied in our info below
+    memcpy(owner.macaddr, ourMacAddr, sizeof(owner.macaddr));
 
     // Include our owner in the node db under our nodenum
     meshtastic_NodeInfoLite *info = getOrCreateMeshNode(getNodeNum());
@@ -139,14 +141,24 @@ NodeDB::NodeDB()
         crypto->setDHPrivateKey(config.security.private_key.bytes);
     } else {
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
-        LOG_INFO("Generating new PKI keys\n");
-        crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
-        config.security.public_key.size = 32;
-        config.security.private_key.size = 32;
-
-        printBytes("New Pubkey", config.security.public_key.bytes, 32);
-        owner.public_key.size = 32;
-        memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+        bool keygenSuccess = false;
+        if (config.security.private_key.size == 32) {
+            LOG_INFO("Calculating PKI Public Key\n");
+            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                keygenSuccess = true;
+            }
+        } else {
+            LOG_INFO("Generating new PKI keys\n");
+            crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+            keygenSuccess = true;
+        }
+        if (keygenSuccess) {
+            config.security.public_key.size = 32;
+            config.security.private_key.size = 32;
+            printBytes("New Pubkey", config.security.public_key.bytes, 32);
+            owner.public_key.size = 32;
+            memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+        }
 #else
         LOG_INFO("No PKI keys set, and generation disabled!\n");
 #endif
@@ -233,7 +245,7 @@ bool NodeDB::factoryReset(bool eraseBleBonds)
 #endif
     // second, install default state (this will deal with the duplicate mac address issue)
     installDefaultDeviceState();
-    installDefaultConfig();
+    installDefaultConfig(!eraseBleBonds); // Also preserve the private key if we're not erasing BLE bonds
     installDefaultModuleConfig();
     installDefaultChannels();
     // third, write everything to disk
@@ -256,8 +268,13 @@ bool NodeDB::factoryReset(bool eraseBleBonds)
     return true;
 }
 
-void NodeDB::installDefaultConfig()
+void NodeDB::installDefaultConfig(bool preserveKey = false)
 {
+    uint8_t private_key_temp[32];
+    bool shouldPreserveKey = preserveKey && config.has_security && config.security.private_key.size > 0;
+    if (shouldPreserveKey) {
+        memcpy(private_key_temp, config.security.private_key.bytes, config.security.private_key.size);
+    }
     LOG_INFO("Installing default LocalConfig\n");
     memset(&config, 0, sizeof(meshtastic_LocalConfig));
     config.version = DEVICESTATE_CUR_VER;
@@ -275,6 +292,7 @@ void NodeDB::installDefaultConfig()
     config.lora.tx_enabled =
         true; // FIXME: maybe false in the future, and setting region to enable it. (unset region forces it off)
     config.lora.override_duty_cycle = false;
+    config.lora.config_ok_to_mqtt = false;
 #ifdef CONFIG_LORA_REGION_USERPREFS
     config.lora.region = CONFIG_LORA_REGION_USERPREFS;
 #else
@@ -292,13 +310,19 @@ void NodeDB::installDefaultConfig()
     config.lora.ignore_mqtt = false;
 #endif
 #ifdef ADMIN_KEY_USERPREFS
-    memcpy(config.security.admin_key.bytes, admin_key_userprefs, 32);
-    config.security.admin_key.size = 32;
+    memcpy(config.security.admin_key[0].bytes, admin_key_userprefs, 32);
+    config.security.admin_key[0].size = 32;
 #else
-    config.security.admin_key.size = 0;
+    config.security.admin_key[0].size = 0;
 #endif
+    if (shouldPreserveKey) {
+        config.security.private_key.size = 32;
+        memcpy(config.security.private_key.bytes, private_key_temp, config.security.private_key.size);
+        printBytes("Restored key", config.security.private_key.bytes, config.security.private_key.size);
+    } else {
+        config.security.private_key.size = 0;
+    }
     config.security.public_key.size = 0;
-    config.security.private_key.size = 0;
 #ifdef PIN_GPS_EN
     config.position.gps_en_gpio = PIN_GPS_EN;
 #endif
@@ -307,7 +331,7 @@ void NodeDB::installDefaultConfig()
 #else
     config.device.disable_triple_click = true;
 #endif
-#if !HAS_GPS || defined(T_DECK)
+#if !HAS_GPS || defined(T_DECK) || defined(TLORA_T3S3_EPAPER)
     config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT;
 #elif !defined(GPS_RX_PIN)
     if (config.position.rx_gpio == 0)
@@ -352,6 +376,9 @@ void NodeDB::installDefaultConfig()
 #ifdef DISPLAY_FLIP_SCREEN
     config.display.flip_screen = true;
 #endif
+#ifdef RAK4630
+    config.display.wake_on_tap_or_motion = true;
+#endif
 #ifdef T_WATCH_S3
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
@@ -395,6 +422,13 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_store_forward = true;
     moduleConfig.has_telemetry = true;
     moduleConfig.has_external_notification = true;
+#if defined(PIN_BUZZER)
+    moduleConfig.external_notification.enabled = true;
+    moduleConfig.external_notification.output_buzzer = PIN_BUZZER;
+    moduleConfig.external_notification.use_pwm = true;
+    moduleConfig.external_notification.alert_message_buzzer = true;
+    moduleConfig.external_notification.nag_timeout = 60;
+#endif
 #if defined(RAK4630) || defined(RAK11310)
     // Default to RAK led pin 2 (blue)
     moduleConfig.external_notification.enabled = true;
@@ -404,6 +438,7 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.output_ms = 1000;
     moduleConfig.external_notification.nag_timeout = 60;
 #endif
+
 #ifdef HAS_I2S
     // Don't worry about the other settings for T-Watch, we'll also use the DRV2056 behavior for notifications
     moduleConfig.external_notification.enabled = true;
@@ -619,10 +654,12 @@ void NodeDB::pickNewNodeNum()
     }
 
     meshtastic_NodeInfoLite *found;
-    while ((nodeNum == NODENUM_BROADCAST || nodeNum < NUM_RESERVED) ||
-           ((found = getMeshNode(nodeNum)) && memcmp(found->user.macaddr, owner.macaddr, sizeof(owner.macaddr)) != 0)) {
+    while (((found = getMeshNode(nodeNum)) && memcmp(found->user.macaddr, ourMacAddr, sizeof(ourMacAddr)) != 0) ||
+           (nodeNum == NODENUM_BROADCAST || nodeNum < NUM_RESERVED)) {
         NodeNum candidate = random(NUM_RESERVED, LONG_MAX); // try a new random choice
-        LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, so trying for 0x%x\n", nodeNum, candidate);
+        LOG_WARN("NOTE! Our desired nodenum 0x%x is invalid or in use, by MAC ending in 0x%02x%02x vs our 0x%02x%02x, so "
+                 "trying for 0x%x\n",
+                 nodeNum, found->user.macaddr[4], found->user.macaddr[5], ourMacAddr[4], ourMacAddr[5], candidate);
         nodeNum = candidate;
     }
     LOG_DEBUG("Using nodenum 0x%x \n", nodeNum);
@@ -688,7 +725,7 @@ void NodeDB::loadFromDisk()
     //} else {
     if (devicestate.version < DEVICESTATE_MIN_VER) {
         LOG_WARN("Devicestate %d is old, discarding\n", devicestate.version);
-        factoryReset();
+        installDefaultDeviceState();
     } else {
         LOG_INFO("Loaded saved devicestate version %d, with nodecount: %d\n", devicestate.version,
                  devicestate.node_db_lite.size());
@@ -704,7 +741,7 @@ void NodeDB::loadFromDisk()
     } else {
         if (config.version < DEVICESTATE_MIN_VER) {
             LOG_WARN("config %d is old, discarding\n", config.version);
-            installDefaultConfig();
+            installDefaultConfig(true);
         } else {
             LOG_INFO("Loaded saved config version %d\n", config.version);
         }
@@ -1017,7 +1054,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
     if (p.public_key.size > 0) {
         printBytes("Incoming Pubkey: ", p.public_key.bytes, 32);
         if (info->user.public_key.size > 0) { // if we have a key for this user already, don't overwrite with a new one
-            LOG_INFO("Public Key set for node, not updateing!\n");
+            LOG_INFO("Public Key set for node, not updating!\n");
             // we copy the key into the incoming packet, to prevent overwrite
             memcpy(p.public_key.bytes, info->user.public_key.bytes, 32);
         } else {
@@ -1075,8 +1112,10 @@ void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
         info->via_mqtt = mp.via_mqtt; // Store if we received this packet via MQTT
 
         // If hopStart was set and there wasn't someone messing with the limit in the middle, add hopsAway
-        if (mp.hop_start != 0 && mp.hop_limit <= mp.hop_start)
+        if (mp.hop_start != 0 && mp.hop_limit <= mp.hop_start) {
+            info->has_hops_away = true;
             info->hops_away = mp.hop_start - mp.hop_limit;
+        }
     }
 }
 

src/mesh/NodeDB.h

@@ -182,7 +182,8 @@ class NodeDB
     void cleanupMeshDB();
 
     /// Reinit device state from scratch (not loading from disk)
-    void installDefaultDeviceState(), installDefaultChannels(), installDefaultConfig(), installDefaultModuleConfig();
+    void installDefaultDeviceState(), installDefaultChannels(), installDefaultConfig(bool preserveKey),
+        installDefaultModuleConfig();
 
     /// write to flash
     /// @return true if the save was successful

src/mesh/PhoneAPI.cpp

@@ -25,6 +25,7 @@
 #if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #endif
+#include <RTC.h>
 
 PhoneAPI::PhoneAPI()
 {
@@ -194,6 +195,8 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         auto us = nodeDB->readNextMeshNode(readIndex);
         if (us) {
             nodeInfoForPhone = TypeConversions::ConvertToNodeInfo(us);
+            nodeInfoForPhone.has_hops_away = false;
+            nodeInfoForPhone.is_favorite = true;
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_node_info_tag;
             fromRadioScratch.node_info = nodeInfoForPhone;
             // Should allow us to resume sending NodeInfo in STATE_SEND_OTHER_NODEINFOS
@@ -259,6 +262,9 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
             fromRadioScratch.config.which_payload_variant = meshtastic_Config_security_tag;
             fromRadioScratch.config.payload_variant.security = config.security;
             break;
+        case meshtastic_Config_sessionkey_tag:
+            fromRadioScratch.config.which_payload_variant = meshtastic_Config_sessionkey_tag;
+            break;
         default:
             LOG_ERROR("Unknown config type %d\n", config_state);
         }
@@ -536,14 +542,37 @@ bool PhoneAPI::available()
     return false;
 }
 
+void PhoneAPI::sendNotification(meshtastic_LogRecord_Level level, uint32_t replyId, const char *message)
+{
+    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+    cn->has_reply_id = true;
+    cn->reply_id = replyId;
+    cn->level = meshtastic_LogRecord_Level_WARNING;
+    cn->time = getValidTime(RTCQualityFromNet);
+    strncpy(cn->message, message, sizeof(cn->message));
+    service->sendClientNotification(cn);
+    delete cn;
+}
+
 /**
  * Handle a packet that the phone wants us to send.  It is our responsibility to free the packet to the pool
  */
 bool PhoneAPI::handleToRadioPacket(meshtastic_MeshPacket &p)
 {
     printPacket("PACKET FROM PHONE", &p);
+    if (p.decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP && lastPortNumToRadio[p.decoded.portnum] &&
+        (millis() - lastPortNumToRadio[p.decoded.portnum]) < (THIRTY_SECONDS_MS)) {
+        LOG_WARN("Rate limiting portnum %d\n", p.decoded.portnum);
+        sendNotification(meshtastic_LogRecord_Level_WARNING, p.id, "TraceRoute can only be sent once every 30 seconds");
+        return false;
+    } else if (p.decoded.portnum == meshtastic_PortNum_POSITION_APP && lastPortNumToRadio[p.decoded.portnum] &&
+               (millis() - lastPortNumToRadio[p.decoded.portnum]) < (FIVE_SECONDS_MS)) {
+        LOG_WARN("Rate limiting portnum %d\n", p.decoded.portnum);
+        sendNotification(meshtastic_LogRecord_Level_WARNING, p.id, "Position can only be sent once every 5 seconds");
+        return false;
+    }
+    lastPortNumToRadio[p.decoded.portnum] = millis();
     service->handleToRadio(p);
-
     return true;
 }
 

src/mesh/PhoneAPI.h

@@ -2,8 +2,10 @@
 
 #include "Observer.h"
 #include "mesh-pb-constants.h"
+#include "meshtastic/portnums.pb.h"
 #include <iterator>
 #include <string>
+#include <unordered_map>
 #include <vector>
 
 // Make sure that we never let our packets grow too large for one BLE packet
@@ -48,6 +50,9 @@ class PhoneAPI
 
     uint8_t config_state = 0;
 
+    // Hashmap of timestamps for last time we received a packet on the API per portnum
+    std::unordered_map<meshtastic_PortNum, uint32_t> lastPortNumToRadio;
+
     /**
      * Each packet sent to the phone has an incrementing count
      */
@@ -99,6 +104,11 @@ class PhoneAPI
      */
     virtual bool handleToRadio(const uint8_t *buf, size_t len);
 
+    /**
+     * Send a (client)notification to the phone
+     */
+    virtual void sendNotification(meshtastic_LogRecord_Level level, uint32_t replyId, const char *message);
+
     /**
      * Get the next packet we want to send to the phone
      *

src/mesh/RadioInterface.cpp

@@ -420,7 +420,7 @@ void RadioInterface::applyModemConfig()
 
             switch (loraConfig.modem_preset) {
             case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-                bw = (myRegion->wideLora) ? 812.5 : 500;
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
                 cr = 5;
                 sf = 7;
                 break;

src/mesh/ReliableRouter.cpp

@@ -112,7 +112,7 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
                 sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, p->hop_start, p->hop_limit);
             } else if (p->which_payload_variant == meshtastic_MeshPacket_encrypted_tag && p->channel == 0 &&
                        (nodeDB->getMeshNode(p->from) == nullptr || nodeDB->getMeshNode(p->from)->user.public_key.size == 0)) {
-                // This looks like it might be a PKI packet from an unknown node, so send PKI_UNKNOWN_PUBKEY
+                LOG_INFO("This looks like it might be a PKI packet from an unknown node, so send PKI_UNKNOWN_PUBKEY\n");
                 sendAckNak(meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY, getFrom(p), p->id, channels.getPrimaryIndex(),
                            p->hop_start, p->hop_limit);
             } else {

src/mesh/Router.cpp

@@ -109,7 +109,7 @@ PacketId generatePacketId()
 
     rollingPacketId++;
 
-    rollingPacketId &= UINT32_MAX >> 22;                                   // Mask out the top 22 bits
+    rollingPacketId &= ID_COUNTER_MASK;                                    // Mask out the top 22 bits
     PacketId id = rollingPacketId | random(UINT32_MAX & 0x7fffffff) << 10; // top 22 bits
     LOG_DEBUG("Partially randomized packet id %u\n", id);
     return id;
@@ -165,6 +165,9 @@ meshtastic_QueueStatus Router::getQueueStatus()
 
 ErrorCode Router::sendLocal(meshtastic_MeshPacket *p, RxSource src)
 {
+    if (p->to == 0) {
+        LOG_ERROR("Packet received with to: of 0!\n");
+    }
     // No need to deliver externally if the destination is the local node
     if (p->to == nodeDB->getNodeNum()) {
         printPacket("Enqueued local", p);
@@ -182,9 +185,12 @@ ErrorCode Router::sendLocal(meshtastic_MeshPacket *p, RxSource src)
             handleReceived(p, src);
         }
 
-        if (!p->channel) { // don't override if a channel was requested
-            p->channel = nodeDB->getMeshNodeChannel(p->to);
-            LOG_DEBUG("localSend to channel %d\n", p->channel);
+        if (!p->channel && !p->pki_encrypted) { // don't override if a channel was requested
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->to);
+            if (node && node->user.public_key.size == 0) {
+                p->channel = node->channel;
+                LOG_DEBUG("localSend to channel %d\n", p->channel);
+            }
         }
 
         return send(p);
@@ -252,6 +258,8 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
         return meshtastic_Routing_Error_BAD_REQUEST;
     }
 
+    fixPriority(p); // Before encryption, fix the priority if it's unset
+
     // If the packet is not yet encrypted, do so now
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
         ChannelIndex chIndex = p->channel; // keep as a local because we are about to change it
@@ -339,8 +347,11 @@ bool perhapsDecode(meshtastic_MeshPacket *p)
                 // memcpy(bytes, ScratchEncrypted, rawSize); // TODO: Rename the bytes buffers
                 // chIndex = 8;
             } else {
+                LOG_ERROR("PKC Decrypted, but pb_decode failed!\n");
                 return false;
             }
+        } else {
+            LOG_WARN("PKC decrypt attempted but failed!\n");
         }
     }
 #endif
@@ -373,6 +384,8 @@ bool perhapsDecode(meshtastic_MeshPacket *p)
         // parsing was successful
         p->which_payload_variant = meshtastic_MeshPacket_decoded_tag; // change type to decoded
         p->channel = chIndex;                                         // change to store the index instead of the hash
+        if (p->decoded.has_bitfield)
+            p->decoded.want_response |= p->decoded.bitfield & BITFIELD_WANT_RESPONSE_MASK;
 
         /* Not actually ever used.
         // Decompress if needed. jm
@@ -419,6 +432,12 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
 
     // If the packet is not yet encrypted, do so now
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        if (p->from == nodeDB->getNodeNum()) {
+            p->decoded.has_bitfield = true;
+            p->decoded.bitfield |= (config.lora.config_ok_to_mqtt << BITFIELD_OK_TO_MQTT_SHIFT);
+            p->decoded.bitfield |= (p->decoded.want_response << BITFIELD_WANT_RESPONSE_SHIFT);
+        }
+
         size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded);
 
         /* Not actually used, so save the cycles
@@ -465,10 +484,20 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
 
 #if !(MESHTASTIC_EXCLUDE_PKI)
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->to);
-        if (!owner.is_licensed && config.security.private_key.size == 32 && p->to != NODENUM_BROADCAST && node != nullptr &&
-            node->user.public_key.size > 0 && p->decoded.portnum != meshtastic_PortNum_TRACEROUTE_APP &&
-            p->decoded.portnum != meshtastic_PortNum_NODEINFO_APP && p->decoded.portnum != meshtastic_PortNum_ROUTING_APP &&
-            p->decoded.portnum != meshtastic_PortNum_POSITION_APP) {
+        // We may want to retool things so we can send a PKC packet when the client specifies a key and nodenum, even if the node
+        // is not in the local nodedb
+        if (
+            // Don't use PKC with Ham mode
+            !owner.is_licensed &&
+            // Don't use PKC if it's not explicitly requested and a non-primary channel is requested
+            !(p->pki_encrypted != true && p->channel > 0) &&
+            // Check for valid keys and single node destination
+            config.security.private_key.size == 32 && p->to != NODENUM_BROADCAST && node != nullptr &&
+            // Check for a known public key for the destination
+            (node->user.public_key.size == 32) &&
+            // Some portnums either make no sense to send with PKC
+            p->decoded.portnum != meshtastic_PortNum_TRACEROUTE_APP && p->decoded.portnum != meshtastic_PortNum_NODEINFO_APP &&
+            p->decoded.portnum != meshtastic_PortNum_ROUTING_APP && p->decoded.portnum != meshtastic_PortNum_POSITION_APP) {
             LOG_DEBUG("Using PKI!\n");
             if (numbytes + 12 > MAX_RHPACKETLEN)
                 return meshtastic_Routing_Error_TOO_LARGE;

src/mesh/Router.h

@@ -148,3 +148,8 @@ extern Router *router;
 /// Generate a unique packet id
 // FIXME, move this someplace better
 PacketId generatePacketId();
+
+#define BITFIELD_WANT_RESPONSE_SHIFT 1
+#define BITFIELD_OK_TO_MQTT_SHIFT 0
+#define BITFIELD_WANT_RESPONSE_MASK (1 << BITFIELD_WANT_RESPONSE_SHIFT)
+#define BITFIELD_OK_TO_MQTT_MASK (1 << BITFIELD_OK_TO_MQTT_SHIFT)

src/mesh/SX126xInterface.cpp

@@ -25,9 +25,25 @@ SX126xInterface<T>::SX126xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs
 /// \return true if initialisation succeeded.
 template <typename T> bool SX126xInterface<T>::init()
 {
-#ifdef SX126X_POWER_EN
-    pinMode(SX126X_POWER_EN, OUTPUT);
+
+// Typically, the RF switch on SX126x boards is controlled by two signals, which are negations of each other (switched RFIO
+// paths). The negation is usually performed in hardware, or (suboptimal design) TXEN and RXEN are the two inputs to this style of
+// RF switch. On some boards, there is no hardware negation between CTRL and ¬CTRL, but CTRL is internally connected to DIO2, and
+// DIO2's switching is done by the SX126X itself, so the MCU can't control ¬CTRL at exactly the same time. One solution would be
+// to set ¬CTRL as SX126X_TXEN or SX126X_RXEN, but they may already be used for another purpose, such as controlling another
+// PA/LNA. Keeping ¬CTRL high seems to work, as long CTRL=1, ¬CTRL=1 has the opposite and stable RF path effect as CTRL=0 and
+// ¬CTRL=1, this depends on the RF switch, but it seems this usually works. Better hardware design, which is done most the time,
+// means this workaround is not necessary.
+#ifdef SX126X_ANT_SW // Perhaps add RADIOLIB_NC check, and beforehand define as such if it is undefined, but it is not commonly
+                     // used and not part of the 'default' set of pin definitions.
+    digitalWrite(SX126X_ANT_SW, HIGH);
+    pinMode(SX126X_ANT_SW, OUTPUT);
+#endif
+
+#ifdef SX126X_POWER_EN // Perhaps add RADIOLIB_NC check, and beforehand define as such if it is undefined, but it is not commonly
+                       // used and not part of the 'default' set of pin definitions.
     digitalWrite(SX126X_POWER_EN, HIGH);
+    pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
 #if ARCH_PORTDUINO
@@ -264,9 +280,7 @@ template <typename T> void SX126xInterface<T>::startReceive()
 
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     // Furthermore, we need the PREAMBLE_DETECTED and HEADER_VALID IRQ flag to detect whether we are actively receiving
-    int err = lora.startReceiveDutyCycleAuto(preambleLength, 8,
-                                             RADIOLIB_SX126X_IRQ_RX_DEFAULT | RADIOLIB_SX126X_IRQ_PREAMBLE_DETECTED |
-                                                 RADIOLIB_SX126X_IRQ_HEADER_VALID);
+    int err = lora.startReceiveDutyCycleAuto(preambleLength, 8, RADIOLIB_IRQ_RX_DEFAULT_FLAGS | RADIOLIB_IRQ_PREAMBLE_DETECTED);
     if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("Radiolib error %d when attempting SX126X startReceiveDutyCycleAuto!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
@@ -301,7 +315,7 @@ template <typename T> bool SX126xInterface<T>::isActivelyReceiving()
     // The IRQ status will be cleared when we start our read operation. Check if we've started a header, but haven't yet
     // received and handled the interrupt for reading the packet/handling errors.
 
-    uint16_t irq = lora.getIrqStatus();
+    uint16_t irq = lora.getIrqFlags();
     bool detected = (irq & (RADIOLIB_SX126X_IRQ_HEADER_VALID | RADIOLIB_SX126X_IRQ_PREAMBLE_DETECTED));
     // Handle false detections
     if (detected) {

src/mesh/SX126xInterface.h

@@ -25,7 +25,7 @@ template <class T> class SX126xInterface : public RadioLibInterface
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() override;
 
-    bool isIRQPending() override { return lora.getIrqStatus() != 0; }
+    bool isIRQPending() override { return lora.getIrqFlags() != 0; }
 
   protected:
     float currentLimit = 140; // Higher OCP limit for SX126x PA

src/mesh/SX128xInterface.cpp

@@ -256,9 +256,7 @@ template <typename T> void SX128xInterface<T>::startReceive()
 #endif
 
     // We use the PREAMBLE_DETECTED and HEADER_VALID IRQ flag to detect whether we are actively receiving
-    int err =
-        lora.startReceive(RADIOLIB_SX128X_RX_TIMEOUT_INF, RADIOLIB_SX128X_IRQ_RX_DEFAULT | RADIOLIB_SX128X_IRQ_PREAMBLE_DETECTED |
-                                                              RADIOLIB_SX128X_IRQ_HEADER_VALID);
+    int err = lora.startReceive(RADIOLIB_SX128X_RX_TIMEOUT_INF, RADIOLIB_IRQ_RX_DEFAULT_FLAGS | RADIOLIB_IRQ_PREAMBLE_DETECTED);
 
     if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("Radiolib error %d when attempting SX128X startReceive!\n", err);

src/mesh/SX128xInterface.h

@@ -27,7 +27,7 @@ template <class T> class SX128xInterface : public RadioLibInterface
     /// Prepare hardware for sleep.  Call this _only_ for deep sleep, not needed for light sleep.
     virtual bool sleep() override;
 
-    bool isIRQPending() override { return lora.getIrqStatus() != 0; }
+    bool isIRQPending() override { return lora.getIrqFlags() != 0; }
 
   protected:
     /**

src/mesh/TypeConversions.cpp

@@ -11,9 +11,13 @@ meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfo
     info.last_heard = lite->last_heard;
     info.channel = lite->channel;
     info.via_mqtt = lite->via_mqtt;
-    info.hops_away = lite->hops_away;
     info.is_favorite = lite->is_favorite;
 
+    if (lite->has_hops_away) {
+        info.has_hops_away = true;
+        info.hops_away = lite->hops_away;
+    }
+
     if (lite->has_position) {
         info.has_position = true;
         if (lite->position.latitude_i != 0)
@@ -78,7 +82,7 @@ meshtastic_UserLite TypeConversions::ConvertToUserLite(meshtastic_User user)
     lite.hw_model = user.hw_model;
     lite.role = user.role;
     lite.is_licensed = user.is_licensed;
-    memccpy(lite.macaddr, user.macaddr, sizeof(user.macaddr), sizeof(lite.macaddr));
+    memcpy(lite.macaddr, user.macaddr, sizeof(lite.macaddr));
     memcpy(lite.public_key.bytes, user.public_key.bytes, sizeof(lite.public_key.bytes));
     lite.public_key.size = user.public_key.size;
     return lite;
@@ -94,7 +98,7 @@ meshtastic_User TypeConversions::ConvertToUser(uint32_t nodeNum, meshtastic_User
     user.hw_model = lite.hw_model;
     user.role = lite.role;
     user.is_licensed = lite.is_licensed;
-    memccpy(user.macaddr, lite.macaddr, sizeof(lite.macaddr), sizeof(user.macaddr));
+    memcpy(user.macaddr, lite.macaddr, sizeof(user.macaddr));
     memcpy(user.public_key.bytes, lite.public_key.bytes, sizeof(user.public_key.bytes));
     user.public_key.size = lite.public_key.size;
 

src/mesh/api/ServerAPI.cpp

@@ -5,7 +5,7 @@
 template <typename T>
 ServerAPI<T>::ServerAPI(T &_client) : StreamAPI(&client), concurrency::OSThread("ServerAPI"), client(_client)
 {
-    LOG_INFO("Incoming wifi connection\n");
+    LOG_INFO("Incoming API connection\n");
 }
 
 template <typename T> ServerAPI<T>::~ServerAPI()
@@ -49,6 +49,16 @@ template <class T, class U> int32_t APIServerPort<T, U>::runOnce()
     if (client) {
         // Close any previous connection (see FIXME in header file)
         if (openAPI) {
+#if RAK_4631
+            // RAK13800 Ethernet requests periodically take more time
+            // This backoff addresses most cases keeping max wait < 1s
+            // Reconnections are delayed by full wait time
+            if (waitTime < 400) {
+                waitTime *= 2;
+                LOG_INFO("Previous TCP connection still open, trying again in %dms\n", waitTime);
+                return waitTime;
+            }
+#endif
             LOG_INFO("Force closing previous TCP connection\n");
             delete openAPI;
         }
@@ -56,5 +66,8 @@ template <class T, class U> int32_t APIServerPort<T, U>::runOnce()
         openAPI = new T(client);
     }
 
+#if RAK_4631
+    waitTime = 100;
+#endif
     return 100; // only check occasionally for incoming connections
 }

src/mesh/api/ServerAPI.h

@@ -31,7 +31,7 @@ template <class T> class ServerAPI : public StreamAPI, private concurrency::OSTh
 };
 
 /**
- * Listens for incoming connections and does accepts and creates instances of WiFiServerAPI as needed
+ * Listens for incoming connections and does accepts and creates instances of ServerAPI as needed
  */
 template <class T, class U> class APIServerPort : public U, private concurrency::OSThread
 {
@@ -41,6 +41,10 @@ template <class T, class U> class APIServerPort : public U, private concurrency:
      * delegate to the worker.  Once coroutines are implemented we can relax this restriction.
      */
     T *openAPI = NULL;
+#if RAK_4631
+    // Track wait time for RAK13800 Ethernet requests
+    int32_t waitTime = 100;
+#endif
 
   public:
     explicit APIServerPort(int port);

src/mesh/api/ethServerAPI.h

@@ -14,7 +14,7 @@ class ethServerAPI : public ServerAPI<EthernetClient>
 };
 
 /**
- * Listens for incoming connections and does accepts and creates instances of WiFiServerAPI as needed
+ * Listens for incoming connections and does accepts and creates instances of EthernetServerAPI as needed
  */
 class ethServerPort : public APIServerPort<ethServerAPI, EthernetServer>
 {

src/mesh/eth/ethClient.cpp

@@ -38,7 +38,7 @@ static int32_t reconnectETH()
         Ethernet.maintain();
         if (!ethStartupComplete) {
             // Start web server
-            LOG_INFO("... Starting network services\n");
+            LOG_INFO("Starting Ethernet network services\n");
 
 #ifndef DISABLE_NTP
             LOG_INFO("Starting NTP time client\n");
@@ -131,7 +131,8 @@ bool initEthernet()
             status = Ethernet.begin(mac);
         } else if (config.network.address_mode == meshtastic_Config_NetworkConfig_AddressMode_STATIC) {
             LOG_INFO("starting Ethernet Static\n");
-            Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.subnet);
+            Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.gateway,
+                           config.network.ipv4_config.subnet);
             status = 1;
         } else {
             LOG_INFO("Ethernet Disabled\n");
@@ -186,4 +187,4 @@ bool isEthernetAvailable()
     }
 }
 
-#endif
+#endif

src/mesh/generated/meshtastic/apponly.pb.h

@@ -55,7 +55,7 @@ extern const pb_msgdesc_t meshtastic_ChannelSet_msg;
 
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_APPONLY_PB_H_MAX_SIZE meshtastic_ChannelSet_size
-#define meshtastic_ChannelSet_size               676
+#define meshtastic_ChannelSet_size               679
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/atak.pb.h

@@ -120,6 +120,7 @@ typedef struct _meshtastic_PLI {
     uint16_t course;
 } meshtastic_PLI;
 
+typedef PB_BYTES_ARRAY_T(220) meshtastic_TAKPacket_detail_t;
 /* Packets for the official ATAK Plugin */
 typedef struct _meshtastic_TAKPacket {
     /* Are the payloads strings compressed for LoRA transport? */
@@ -139,6 +140,9 @@ typedef struct _meshtastic_TAKPacket {
         meshtastic_PLI pli;
         /* ATAK GeoChat message */
         meshtastic_GeoChat chat;
+        /* Generic CoT detail XML
+     May be compressed / truncated by the sender */
+        meshtastic_TAKPacket_detail_t detail;
     } payload_variant;
 } meshtastic_TAKPacket;
 
@@ -199,6 +203,7 @@ extern "C" {
 #define meshtastic_TAKPacket_status_tag          4
 #define meshtastic_TAKPacket_pli_tag             5
 #define meshtastic_TAKPacket_chat_tag            6
+#define meshtastic_TAKPacket_detail_tag          7
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_TAKPacket_FIELDLIST(X, a) \
@@ -207,7 +212,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  contact,           2) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  group,             3) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  status,            4) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,pli,payload_variant.pli),   5) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,chat,payload_variant.chat),   6)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload_variant,chat,payload_variant.chat),   6) \
+X(a, STATIC,   ONEOF,    BYTES,    (payload_variant,detail,payload_variant.detail),   7)
 #define meshtastic_TAKPacket_CALLBACK NULL
 #define meshtastic_TAKPacket_DEFAULT NULL
 #define meshtastic_TAKPacket_contact_MSGTYPE meshtastic_Contact

src/mesh/generated/meshtastic/clientonly.pb.h

@@ -5,6 +5,7 @@
 #define PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED
 #include <pb.h>
 #include "meshtastic/localonly.pb.h"
+#include "meshtastic/mesh.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
@@ -28,6 +29,15 @@ typedef struct _meshtastic_DeviceProfile {
     /* The ModuleConfig of the node */
     bool has_module_config;
     meshtastic_LocalModuleConfig module_config;
+    /* Fixed position data */
+    bool has_fixed_position;
+    meshtastic_Position fixed_position;
+    /* Ringtone for ExternalNotification */
+    bool has_ringtone;
+    char ringtone[231];
+    /* Predefined messages for CannedMessage */
+    bool has_canned_messages;
+    char canned_messages[201];
 } meshtastic_DeviceProfile;
 
 
@@ -36,8 +46,8 @@ extern "C" {
 #endif
 
 /* Initializer values for message structs */
-#define meshtastic_DeviceProfile_init_default    {false, "", false, "", {{NULL}, NULL}, false, meshtastic_LocalConfig_init_default, false, meshtastic_LocalModuleConfig_init_default}
-#define meshtastic_DeviceProfile_init_zero       {false, "", false, "", {{NULL}, NULL}, false, meshtastic_LocalConfig_init_zero, false, meshtastic_LocalModuleConfig_init_zero}
+#define meshtastic_DeviceProfile_init_default    {false, "", false, "", {{NULL}, NULL}, false, meshtastic_LocalConfig_init_default, false, meshtastic_LocalModuleConfig_init_default, false, meshtastic_Position_init_default, false, "", false, ""}
+#define meshtastic_DeviceProfile_init_zero       {false, "", false, "", {{NULL}, NULL}, false, meshtastic_LocalConfig_init_zero, false, meshtastic_LocalModuleConfig_init_zero, false, meshtastic_Position_init_zero, false, "", false, ""}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_DeviceProfile_long_name_tag   1
@@ -45,6 +55,9 @@ extern "C" {
 #define meshtastic_DeviceProfile_channel_url_tag 3
 #define meshtastic_DeviceProfile_config_tag      4
 #define meshtastic_DeviceProfile_module_config_tag 5
+#define meshtastic_DeviceProfile_fixed_position_tag 6
+#define meshtastic_DeviceProfile_ringtone_tag    7
+#define meshtastic_DeviceProfile_canned_messages_tag 8
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_DeviceProfile_FIELDLIST(X, a) \
@@ -52,11 +65,15 @@ X(a, STATIC,   OPTIONAL, STRING,   long_name,         1) \
 X(a, STATIC,   OPTIONAL, STRING,   short_name,        2) \
 X(a, CALLBACK, OPTIONAL, STRING,   channel_url,       3) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  config,            4) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  module_config,     5)
+X(a, STATIC,   OPTIONAL, MESSAGE,  module_config,     5) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  fixed_position,    6) \
+X(a, STATIC,   OPTIONAL, STRING,   ringtone,          7) \
+X(a, STATIC,   OPTIONAL, STRING,   canned_messages,   8)
 #define meshtastic_DeviceProfile_CALLBACK pb_default_field_callback
 #define meshtastic_DeviceProfile_DEFAULT NULL
 #define meshtastic_DeviceProfile_config_MSGTYPE meshtastic_LocalConfig
 #define meshtastic_DeviceProfile_module_config_MSGTYPE meshtastic_LocalModuleConfig
+#define meshtastic_DeviceProfile_fixed_position_MSGTYPE meshtastic_Position
 
 extern const pb_msgdesc_t meshtastic_DeviceProfile_msg;
 

src/mesh/generated/meshtastic/config.pb.h

@@ -510,6 +510,8 @@ typedef struct _meshtastic_Config_LoRaConfig {
     uint32_t ignore_incoming[3];
     /* If true, the device will not process any packets received via LoRa that passed via MQTT anywhere on the path towards it. */
     bool ignore_mqtt;
+    /* Sets the ok_to_mqtt bit on outgoing packets */
+    bool config_ok_to_mqtt;
 } meshtastic_Config_LoRaConfig;
 
 typedef struct _meshtastic_Config_BluetoothConfig {
@@ -532,7 +534,8 @@ typedef struct _meshtastic_Config_SecurityConfig {
  Used to create a shared key with a remote device. */
     meshtastic_Config_SecurityConfig_private_key_t private_key;
     /* The public key authorized to send admin messages to this node. */
-    meshtastic_Config_SecurityConfig_admin_key_t admin_key;
+    pb_size_t admin_key_count;
+    meshtastic_Config_SecurityConfig_admin_key_t admin_key[3];
     /* If true, device is considered to be "managed" by a mesh administrator via admin messages
  Device is managed by a mesh administrator. */
     bool is_managed;
@@ -655,9 +658,9 @@ extern "C" {
 #define meshtastic_Config_NetworkConfig_init_default {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_default, ""}
 #define meshtastic_Config_NetworkConfig_IpV4Config_init_default {0, 0, 0, 0}
 #define meshtastic_Config_DisplayConfig_init_default {0, _meshtastic_Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _meshtastic_Config_DisplayConfig_DisplayUnits_MIN, _meshtastic_Config_DisplayConfig_OledType_MIN, _meshtastic_Config_DisplayConfig_DisplayMode_MIN, 0, 0, _meshtastic_Config_DisplayConfig_CompassOrientation_MIN}
-#define meshtastic_Config_LoRaConfig_init_default {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0}
+#define meshtastic_Config_LoRaConfig_init_default {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0, 0}
 #define meshtastic_Config_BluetoothConfig_init_default {0, _meshtastic_Config_BluetoothConfig_PairingMode_MIN, 0}
-#define meshtastic_Config_SecurityConfig_init_default {{0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
+#define meshtastic_Config_SecurityConfig_init_default {{0, {0}}, {0, {0}}, 0, {{0, {0}}, {0, {0}}, {0, {0}}}, 0, 0, 0, 0}
 #define meshtastic_Config_SessionkeyConfig_init_default {0}
 #define meshtastic_Config_init_zero              {0, {meshtastic_Config_DeviceConfig_init_zero}}
 #define meshtastic_Config_DeviceConfig_init_zero {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0}
@@ -666,9 +669,9 @@ extern "C" {
 #define meshtastic_Config_NetworkConfig_init_zero {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_zero, ""}
 #define meshtastic_Config_NetworkConfig_IpV4Config_init_zero {0, 0, 0, 0}
 #define meshtastic_Config_DisplayConfig_init_zero {0, _meshtastic_Config_DisplayConfig_GpsCoordinateFormat_MIN, 0, 0, 0, _meshtastic_Config_DisplayConfig_DisplayUnits_MIN, _meshtastic_Config_DisplayConfig_OledType_MIN, _meshtastic_Config_DisplayConfig_DisplayMode_MIN, 0, 0, _meshtastic_Config_DisplayConfig_CompassOrientation_MIN}
-#define meshtastic_Config_LoRaConfig_init_zero   {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0}
+#define meshtastic_Config_LoRaConfig_init_zero   {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0, 0}
 #define meshtastic_Config_BluetoothConfig_init_zero {0, _meshtastic_Config_BluetoothConfig_PairingMode_MIN, 0}
-#define meshtastic_Config_SecurityConfig_init_zero {{0, {0}}, {0, {0}}, {0, {0}}, 0, 0, 0, 0}
+#define meshtastic_Config_SecurityConfig_init_zero {{0, {0}}, {0, {0}}, 0, {{0, {0}}, {0, {0}}, {0, {0}}}, 0, 0, 0, 0}
 #define meshtastic_Config_SessionkeyConfig_init_zero {0}
 
 /* Field tags (for use in manual encoding/decoding) */
@@ -745,6 +748,7 @@ extern "C" {
 #define meshtastic_Config_LoRaConfig_pa_fan_disabled_tag 15
 #define meshtastic_Config_LoRaConfig_ignore_incoming_tag 103
 #define meshtastic_Config_LoRaConfig_ignore_mqtt_tag 104
+#define meshtastic_Config_LoRaConfig_config_ok_to_mqtt_tag 105
 #define meshtastic_Config_BluetoothConfig_enabled_tag 1
 #define meshtastic_Config_BluetoothConfig_mode_tag 2
 #define meshtastic_Config_BluetoothConfig_fixed_pin_tag 3
@@ -886,7 +890,8 @@ X(a, STATIC,   SINGULAR, BOOL,     sx126x_rx_boosted_gain,  13) \
 X(a, STATIC,   SINGULAR, FLOAT,    override_frequency,  14) \
 X(a, STATIC,   SINGULAR, BOOL,     pa_fan_disabled,  15) \
 X(a, STATIC,   REPEATED, UINT32,   ignore_incoming, 103) \
-X(a, STATIC,   SINGULAR, BOOL,     ignore_mqtt,     104)
+X(a, STATIC,   SINGULAR, BOOL,     ignore_mqtt,     104) \
+X(a, STATIC,   SINGULAR, BOOL,     config_ok_to_mqtt, 105)
 #define meshtastic_Config_LoRaConfig_CALLBACK NULL
 #define meshtastic_Config_LoRaConfig_DEFAULT NULL
 
@@ -900,7 +905,7 @@ X(a, STATIC,   SINGULAR, UINT32,   fixed_pin,         3)
 #define meshtastic_Config_SecurityConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BYTES,    public_key,        1) \
 X(a, STATIC,   SINGULAR, BYTES,    private_key,       2) \
-X(a, STATIC,   SINGULAR, BYTES,    admin_key,         3) \
+X(a, STATIC,   REPEATED, BYTES,    admin_key,         3) \
 X(a, STATIC,   SINGULAR, BOOL,     is_managed,        4) \
 X(a, STATIC,   SINGULAR, BOOL,     serial_enabled,    5) \
 X(a, STATIC,   SINGULAR, BOOL,     debug_log_api_enabled,   6) \
@@ -943,12 +948,12 @@ extern const pb_msgdesc_t meshtastic_Config_SessionkeyConfig_msg;
 #define meshtastic_Config_BluetoothConfig_size   10
 #define meshtastic_Config_DeviceConfig_size      98
 #define meshtastic_Config_DisplayConfig_size     30
-#define meshtastic_Config_LoRaConfig_size        82
+#define meshtastic_Config_LoRaConfig_size        85
 #define meshtastic_Config_NetworkConfig_IpV4Config_size 20
 #define meshtastic_Config_NetworkConfig_size     196
 #define meshtastic_Config_PositionConfig_size    62
 #define meshtastic_Config_PowerConfig_size       52
-#define meshtastic_Config_SecurityConfig_size    110
+#define meshtastic_Config_SecurityConfig_size    178
 #define meshtastic_Config_SessionkeyConfig_size  0
 #define meshtastic_Config_size                   199
 

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -94,6 +94,7 @@ typedef struct _meshtastic_NodeInfoLite {
     /* True if we witnessed the node over MQTT instead of LoRA transport */
     bool via_mqtt;
     /* Number of hops away from us this node is (0 if adjacent) */
+    bool has_hops_away;
     uint8_t hops_away;
     /* True if node is in our favorites list
  Persists between NodeDB internal clean ups */
@@ -202,13 +203,13 @@ extern "C" {
 /* Initializer values for message structs */
 #define meshtastic_PositionLite_init_default     {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
 #define meshtastic_UserLite_init_default         {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
-#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, 0, 0}
+#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0}
 #define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default, 0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}, {0}}
 #define meshtastic_ChannelFile_init_default      {0, {meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default}, 0}
 #define meshtastic_OEMStore_init_default         {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_default, false, meshtastic_LocalModuleConfig_init_default}
 #define meshtastic_PositionLite_init_zero        {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
 #define meshtastic_UserLite_init_zero            {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
-#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, 0, 0}
+#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0}
 #define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero, 0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}, {0}}
 #define meshtastic_ChannelFile_init_zero         {0, {meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero}, 0}
 #define meshtastic_OEMStore_init_zero            {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_zero, false, meshtastic_LocalModuleConfig_init_zero}
@@ -287,7 +288,7 @@ X(a, STATIC,   SINGULAR, FIXED32,  last_heard,        5) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
 X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
 X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
-X(a, STATIC,   SINGULAR, UINT32,   hops_away,         9) \
+X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
 X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
 #define meshtastic_NodeInfoLite_CALLBACK NULL
 #define meshtastic_NodeInfoLite_DEFAULT NULL
@@ -358,7 +359,7 @@ extern const pb_msgdesc_t meshtastic_OEMStore_msg;
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_OEMStore_size
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_NodeInfoLite_size             183
-#define meshtastic_OEMStore_size                 3496
+#define meshtastic_OEMStore_size                 3568
 #define meshtastic_PositionLite_size             28
 #define meshtastic_UserLite_size                 96
 

src/mesh/generated/meshtastic/localonly.pb.h

@@ -186,8 +186,8 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
-#define meshtastic_LocalConfig_size              663
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define meshtastic_LocalConfig_size              735
 #define meshtastic_LocalModuleConfig_size        687
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/mesh.pb.h

@@ -196,6 +196,9 @@ typedef enum _meshtastic_HardwareModel {
  https://www.adafruit.com/product/938
   ^^^ short A0 to switch to I2C address 0x3C */
     meshtastic_HardwareModel_RP2040_FEATHER_RFM95 = 76,
+    /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
+    meshtastic_HardwareModel_M5STACK_COREBASIC = 77,
+    meshtastic_HardwareModel_M5STACK_CORE2 = 78,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -313,7 +316,11 @@ typedef enum _meshtastic_Routing_Error {
     /* The client specified a PKI transport, but the node was unable to send the packet using PKI (and did not send the message at all) */
     meshtastic_Routing_Error_PKI_FAILED = 34,
     /* The receiving node does not have a Public Key to decode with */
-    meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY = 35
+    meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY = 35,
+    /* Admin packet otherwise checks out, but uses a bogus or expired session key */
+    meshtastic_Routing_Error_ADMIN_BAD_SESSION_KEY = 36,
+    /* Admin packet sent using PKC, but not from a public key on the admin key list */
+    meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED = 37
 } meshtastic_Routing_Error;
 
 /* The priority of this message for sending.
@@ -347,6 +354,11 @@ typedef enum _meshtastic_MeshPacket_Priority {
     /* If priority is unset but the message is marked as want_ack,
  assume it is important and use a slightly higher priority */
     meshtastic_MeshPacket_Priority_RELIABLE = 70,
+    /* If priority is unset but the packet is a response to a request, we want it to get there relatively quickly.
+ Furthermore, responses stop relaying packets directed to a node early. */
+    meshtastic_MeshPacket_Priority_RESPONSE = 80,
+    /* Higher priority for specific message types (portnums) to distinguish between other reliable packets. */
+    meshtastic_MeshPacket_Priority_HIGH = 100,
     /* Ack/naks are sent with very high priority to ensure that retransmission
  stops as soon as possible */
     meshtastic_MeshPacket_Priority_ACK = 120,
@@ -572,6 +584,9 @@ typedef struct _meshtastic_Data {
     /* Defaults to false. If true, then what is in the payload should be treated as an emoji like giving
  a message a heart or poop emoji. */
     uint32_t emoji;
+    /* Bitfield for extra flags. First use is to indicate that user approves the packet being uploaded to MQTT. */
+    bool has_bitfield;
+    uint8_t bitfield;
 } meshtastic_Data;
 
 /* Waypoint message, used to share arbitrary locations across the mesh */
@@ -730,6 +745,7 @@ typedef struct _meshtastic_NodeInfo {
     /* True if we witnessed the node over MQTT instead of LoRA transport */
     bool via_mqtt;
     /* Number of hops away from us this node is (0 if adjacent) */
+    bool has_hops_away;
     uint8_t hops_away;
     /* True if node is in our favorites list
  Persists between NodeDB internal clean ups */
@@ -860,6 +876,8 @@ typedef struct _meshtastic_DeviceMetadata {
     meshtastic_HardwareModel hw_model;
     /* Has Remote Hardware enabled */
     bool hasRemoteHardware;
+    /* Has PKC capabilities */
+    bool hasPKC;
 } meshtastic_DeviceMetadata;
 
 /* Packets from the radio to the phone will appear on the fromRadio characteristic.
@@ -1015,8 +1033,8 @@ extern "C" {
 #define _meshtastic_Position_AltSource_ARRAYSIZE ((meshtastic_Position_AltSource)(meshtastic_Position_AltSource_ALT_BAROMETRIC+1))
 
 #define _meshtastic_Routing_Error_MIN meshtastic_Routing_Error_NONE
-#define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY
-#define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY+1))
+#define _meshtastic_Routing_Error_MAX meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED
+#define _meshtastic_Routing_Error_ARRAYSIZE ((meshtastic_Routing_Error)(meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED+1))
 
 #define _meshtastic_MeshPacket_Priority_MIN meshtastic_MeshPacket_Priority_UNSET
 #define _meshtastic_MeshPacket_Priority_MAX meshtastic_MeshPacket_Priority_MAX
@@ -1074,11 +1092,11 @@ extern "C" {
 #define meshtastic_User_init_default             {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
 #define meshtastic_RouteDiscovery_init_default   {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define meshtastic_Routing_init_default          {0, {meshtastic_RouteDiscovery_init_default}}
-#define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0}
+#define meshtastic_Data_init_default             {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_Waypoint_init_default         {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_default       {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0}
-#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, 0, 0}
+#define meshtastic_NodeInfo_init_default         {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0}
 #define meshtastic_MyNodeInfo_init_default       {0, 0, 0}
 #define meshtastic_LogRecord_init_default        {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_default      {0, 0, 0, 0}
@@ -1089,7 +1107,7 @@ extern "C" {
 #define meshtastic_Compressed_init_default       {_meshtastic_PortNum_MIN, {0, {0}}}
 #define meshtastic_NeighborInfo_init_default     {0, 0, 0, 0, {meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default}}
 #define meshtastic_Neighbor_init_default         {0, 0, 0, 0}
-#define meshtastic_DeviceMetadata_init_default   {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0}
+#define meshtastic_DeviceMetadata_init_default   {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0}
 #define meshtastic_Heartbeat_init_default        {0}
 #define meshtastic_NodeRemoteHardwarePin_init_default {0, false, meshtastic_RemoteHardwarePin_init_default}
 #define meshtastic_ChunkedPayload_init_default   {0, 0, 0, {0, {0}}}
@@ -1099,11 +1117,11 @@ extern "C" {
 #define meshtastic_User_init_zero                {"", "", "", {0}, _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}}
 #define meshtastic_RouteDiscovery_init_zero      {0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}, 0, {0, 0, 0, 0, 0, 0, 0, 0}}
 #define meshtastic_Routing_init_zero             {0, {meshtastic_RouteDiscovery_init_zero}}
-#define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0}
+#define meshtastic_Data_init_zero                {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0}
 #define meshtastic_Waypoint_init_zero            {0, false, 0, false, 0, 0, 0, "", "", 0}
 #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0}
 #define meshtastic_MeshPacket_init_zero          {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0}
-#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, 0, 0}
+#define meshtastic_NodeInfo_init_zero            {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0}
 #define meshtastic_MyNodeInfo_init_zero          {0, 0, 0}
 #define meshtastic_LogRecord_init_zero           {"", 0, "", _meshtastic_LogRecord_Level_MIN}
 #define meshtastic_QueueStatus_init_zero         {0, 0, 0, 0}
@@ -1114,7 +1132,7 @@ extern "C" {
 #define meshtastic_Compressed_init_zero          {_meshtastic_PortNum_MIN, {0, {0}}}
 #define meshtastic_NeighborInfo_init_zero        {0, 0, 0, 0, {meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero}}
 #define meshtastic_Neighbor_init_zero            {0, 0, 0, 0}
-#define meshtastic_DeviceMetadata_init_zero      {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0}
+#define meshtastic_DeviceMetadata_init_zero      {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0}
 #define meshtastic_Heartbeat_init_zero           {0}
 #define meshtastic_NodeRemoteHardwarePin_init_zero {0, false, meshtastic_RemoteHardwarePin_init_zero}
 #define meshtastic_ChunkedPayload_init_zero      {0, 0, 0, {0, {0}}}
@@ -1168,6 +1186,7 @@ extern "C" {
 #define meshtastic_Data_request_id_tag           6
 #define meshtastic_Data_reply_id_tag             7
 #define meshtastic_Data_emoji_tag                8
+#define meshtastic_Data_bitfield_tag             9
 #define meshtastic_Waypoint_id_tag               1
 #define meshtastic_Waypoint_latitude_i_tag       2
 #define meshtastic_Waypoint_longitude_i_tag      3
@@ -1244,6 +1263,7 @@ extern "C" {
 #define meshtastic_DeviceMetadata_position_flags_tag 8
 #define meshtastic_DeviceMetadata_hw_model_tag   9
 #define meshtastic_DeviceMetadata_hasRemoteHardware_tag 10
+#define meshtastic_DeviceMetadata_hasPKC_tag     11
 #define meshtastic_FromRadio_id_tag              1
 #define meshtastic_FromRadio_packet_tag          2
 #define meshtastic_FromRadio_my_info_tag         3
@@ -1343,7 +1363,8 @@ X(a, STATIC,   SINGULAR, FIXED32,  dest,              4) \
 X(a, STATIC,   SINGULAR, FIXED32,  source,            5) \
 X(a, STATIC,   SINGULAR, FIXED32,  request_id,        6) \
 X(a, STATIC,   SINGULAR, FIXED32,  reply_id,          7) \
-X(a, STATIC,   SINGULAR, FIXED32,  emoji,             8)
+X(a, STATIC,   SINGULAR, FIXED32,  emoji,             8) \
+X(a, STATIC,   OPTIONAL, UINT32,   bitfield,          9)
 #define meshtastic_Data_CALLBACK NULL
 #define meshtastic_Data_DEFAULT NULL
 
@@ -1398,7 +1419,7 @@ X(a, STATIC,   SINGULAR, FIXED32,  last_heard,        5) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
 X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
 X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
-X(a, STATIC,   SINGULAR, UINT32,   hops_away,         9) \
+X(a, STATIC,   OPTIONAL, UINT32,   hops_away,         9) \
 X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
 #define meshtastic_NodeInfo_CALLBACK NULL
 #define meshtastic_NodeInfo_DEFAULT NULL
@@ -1523,7 +1544,8 @@ X(a, STATIC,   SINGULAR, BOOL,     hasEthernet,       6) \
 X(a, STATIC,   SINGULAR, UENUM,    role,              7) \
 X(a, STATIC,   SINGULAR, UINT32,   position_flags,    8) \
 X(a, STATIC,   SINGULAR, UENUM,    hw_model,          9) \
-X(a, STATIC,   SINGULAR, BOOL,     hasRemoteHardware,  10)
+X(a, STATIC,   SINGULAR, BOOL,     hasRemoteHardware,  10) \
+X(a, STATIC,   SINGULAR, BOOL,     hasPKC,           11)
 #define meshtastic_DeviceMetadata_CALLBACK NULL
 #define meshtastic_DeviceMetadata_DEFAULT NULL
 
@@ -1621,13 +1643,13 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg;
 #define meshtastic_ChunkedPayload_size           245
 #define meshtastic_ClientNotification_size       415
 #define meshtastic_Compressed_size               243
-#define meshtastic_Data_size                     270
-#define meshtastic_DeviceMetadata_size           46
+#define meshtastic_Data_size                     273
+#define meshtastic_DeviceMetadata_size           48
 #define meshtastic_FileInfo_size                 236
 #define meshtastic_FromRadio_size                510
 #define meshtastic_Heartbeat_size                0
 #define meshtastic_LogRecord_size                426
-#define meshtastic_MeshPacket_size               364
+#define meshtastic_MeshPacket_size               367
 #define meshtastic_MqttClientProxyMessage_size   501
 #define meshtastic_MyNodeInfo_size               18
 #define meshtastic_NeighborInfo_size             258