chore(deps): update meshtastic/device-ui digest to 10f0244 (#7840)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.trunk/trunk.yaml

@@ -8,8 +8,8 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.467
-    - renovate@41.91.3
+    - checkov@3.2.469
+    - renovate@41.93.2
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1

bin/device-install.bat

@@ -14,11 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
 :help
@@ -233,14 +233,14 @@ IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!S
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase-flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x00 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -252,9 +252,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write-flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-install.sh

@@ -33,10 +33,9 @@ BIGDB_16MB=(
 	"m5stack-cores3"
 	"station-g2"
     "t-eth-elite"
+    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv-35-tft"
-    "elecrow-adv-24-28-tft"
-    "elecrow-adv1-43-50-70-tft"
+    "elecrow-adv"
 )
 S3_VARIANTS=(
     "s3"
@@ -47,6 +46,7 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
+    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -201,12 +201,12 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase_flash
-    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD write-flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.bat

@@ -133,7 +133,7 @@ IF %CHANGE_MODE% EQU 1 (
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -145,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -75,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write-flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/8019704395b7539600d581330499208edcd80804.zip
+	https://github.com/meshtastic/device-ui/archive/10f02441ec7dcd099c4c5165c709afc3e0e3cb88.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]