Merge branch 'develop' into esp32-h2

.github/actions/build-variant/action.yml

@@ -76,7 +76,7 @@ runs:
         done
 
     - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v5
+      uses: actions/cache@v4
       with:
         path: ~/.platformio/.cache
         key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v6
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
         overwrite: true

.github/workflows/build_debian_src.yml

@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -56,21 +56,19 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Job summary
+      - name: Echo manifest from release/firmware-*.mt.json to job summary
+        if: ${{ always() }}
         env:
           PIO_ENV: ${{ inputs.pio_env }}
         run: |
-          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
-          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
+          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
           echo '```json' >> $GITHUB_STEP_SUMMARY
           cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
           echo '' >> $GITHUB_STEP_SUMMARY
           echo '```' >> $GITHUB_STEP_SUMMARY
-          echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}

.github/workflows/build_one_target.yml

@@ -98,7 +98,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -127,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/main_matrix.yml

@@ -77,21 +77,16 @@ jobs:
       fail-fast: false
       matrix:
         check: ${{ fromJson(needs.setup.outputs.check) }}
-    # Use 'arctastic' self-hosted runner pool when checking in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+
+    runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v6
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
       - name: Check ${{ matrix.check.board }}
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ matrix.check.platform }}
-          pio_env: ${{ matrix.check.board }}
-          pio_target: check
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
   build:
     needs: [setup, version]
@@ -173,7 +168,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -183,7 +178,7 @@ jobs:
         run: ls -R
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -200,7 +195,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -219,7 +214,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -260,14 +255,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -291,7 +286,7 @@ jobs:
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: manifest-${{ needs.version.outputs.long }}
           overwrite: true
@@ -332,7 +327,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -349,7 +344,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -388,14 +383,14 @@ jobs:
           python-version: 3.x
 
       - name: Get firmware artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
       - name: Get manifest artifact
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: manifest-${{ needs.version.outputs.long }}
           path: ./publish

.github/workflows/merge_queue.yml

@@ -147,7 +147,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -235,14 +235,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -292,7 +292,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -309,7 +309,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -347,7 +347,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -102,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/test_native.yml

@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v7
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v6
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}
           path: code-coverage-report

.github/workflows/update_protobufs.yml

@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.trunk/trunk.yaml

@@ -9,24 +9,24 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.495
-    - renovate@42.57.1
+    - renovate@42.30.4
     - prettier@3.7.4
-    - trufflehog@3.92.3
+    - trufflehog@3.91.2
     - yamllint@1.37.1
     - bandit@1.9.2
-    - trivy@0.68.1
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.9
+    - ruff@0.14.7
     - isort@7.0.0
-    - markdownlint@0.47.0
-    - oxipng@10.0.0
+    - markdownlint@0.46.0
+    - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.12.0
+    - black@25.11.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

bin/build-esp32.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -32,10 +32,20 @@ cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
 echo "Copying ESP32 update bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying Filesystem for ESP32 targets"
+echo "Building Filesystem for ESP32 targets"
+# If you want to build the webui, uncomment the following lines
+# pio run --environment $1 -t buildfs
+# cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+# # Remove webserver files from the filesystem and rebuild
+# ls -l data/static # Diagnostic list of files
+# rm -rf data/static
+pio run --environment $1 -t buildfs --disable-auto-clean
 cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
-echo "Copying manifest"
+# Generate the manifest file
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-nrf52.sh

@@ -22,7 +22,7 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
@@ -47,5 +47,8 @@ if (echo $1 | grep -q "rak4631"); then
 	cp $SRCHEX $OUTDIR/
 fi
 
-echo "Copying manifest"
+# Generate the manifest file
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
-echo "Copying manifest"
+# Generate the manifest file
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-stm32wl.sh

@@ -22,12 +22,15 @@ export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
 
-pio run --environment $1 -t mtjson # -v
+pio run --environment $1 # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
-echo "Copying manifest"
+# Generate the manifest file
+echo "Generating Meshtastic manifest"
+TIMEFORMAT="Generated manifest in %E seconds"
+time pio run --environment $1 -t mtjson --silent --disable-auto-clean
 cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/config-dist.yaml

@@ -184,8 +184,6 @@ Input:
 Logging:
   LogLevel: info # debug, info, warn, error
 #  TraceFile: /var/log/meshtasticd.json
-#  JSONFile: /packets.json # File location for JSON output of decoded packets
-#  JSONFilter: position # filter for packets to save to JSON file
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:

bin/platformio-custom.py

@@ -159,22 +159,20 @@ def load_boot_logo(source, target, env):
 
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-    env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
+    env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
 
-mtjson_deps = ["buildprog"]
-if platform.name == "espressif32":
-    # Build littlefs image as part of mtjson target
-    # Equivalent to `pio run -t buildfs`
-    target_lfs = env.DataToBin(
-        join("$BUILD_DIR", "${ESP32_FS_IMAGE_NAME}"), "$PROJECT_DATA_DIR"
-    )
-    mtjson_deps.append(target_lfs)
+# Rename (mv) littlefs.bin to include the PROGNAME
+# This ensures the littlefs.bin is named consistently with the firmware
+env.AddPostAction('$BUILD_DIR/littlefs.bin', env.VerboseAction(
+    f'mv $BUILD_DIR/littlefs.bin $BUILD_DIR/{lfsbin}',
+    f'Renaming littlefs.bin to {lfsbin}'
+))
 
 env.AddCustomTarget(
     name="mtjson",
-    dependencies=mtjson_deps,
+    dependencies=None,
     actions=[manifest_gather],
     title="Meshtastic Manifest",
     description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=False,
+    always_build=True,
 )

bin/platformio-pre.py

@@ -11,9 +11,6 @@ else:
     prefsLoc = env["PROJECT_DIR"] + "/version.properties"
     verObj = readProps(prefsLoc)
     env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-    env.Replace(ESP32_FS_IMAGE_NAME=f"littlefs-{env.get('PIOENV')}-{verObj['long']}")
 
 # Print the new program name for verification
 print(f"PROGNAME: {env.get('PROGNAME')}")
-if platform.name == "espressif32":
-    print(f"ESP32_FS_IMAGE_NAME: {env.get('ESP32_FS_IMAGE_NAME')}")

extra_scripts/esp32_extra.py

@@ -10,12 +10,6 @@ Import("env")
 platform = env.PioPlatform()
 
 sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
 import esptool
 
 

platformio.ini

@@ -123,7 +123,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/862ed040c4ab44f0dfbbe492691f144886102588.zip
+	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/DisplayFormatters.cpp

@@ -31,9 +31,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         return useShortName ? "LongF" : "LongFast";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-        return useShortName ? "LongT" : "LongTurbo";
-        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;

src/graphics/draw/DebugRenderer.cpp

@@ -532,10 +532,8 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     const int labelX = x;
     int barsOffset = (isHighResolution) ? 24 : 0;
 #ifdef USE_EINK
-#ifndef T_DECK_PRO
     barsOffset -= 12;
 #endif
-#endif
 #if defined(M5STACK_UNITC6L)
     const int barX = x + 45 + barsOffset;
 #else
@@ -576,7 +574,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 #endif
         // Value string
         display->setTextAlignment(TEXT_ALIGN_RIGHT);
-        display->drawString(SCREEN_WIDTH, getTextPositions(display)[line], combinedStr);
+        display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
     };
 
     // === Memory values ===

src/graphics/draw/MenuHandler.cpp

@@ -20,41 +20,12 @@
 #include "modules/KeyVerificationModule.h"
 
 #include "modules/TraceRouteModule.h"
-#include <algorithm>
-#include <array>
 #include <functional>
-#include <utility>
 
 extern uint16_t TFT_MESH;
 
 namespace graphics
 {
-
-namespace
-{
-
-// Caller must ensure the provided options array outlives the banner callback.
-template <typename T, size_t N, typename Callback>
-BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOption<T> (&options)[N],
-                                               std::array<const char *, N> &labels, Callback &&onSelection)
-{
-    for (size_t i = 0; i < N; ++i) {
-        labels[i] = options[i].label;
-    }
-
-    const MenuOption<T> *optionsPtr = options;
-    auto callback = std::function<void(const MenuOption<T> &, int)>(std::forward<Callback>(onSelection));
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = message;
-    bannerOptions.optionsArrayPtr = labels.data();
-    bannerOptions.optionsCount = static_cast<uint8_t>(N);
-    bannerOptions.bannerCallback = [optionsPtr, callback](int selected) -> void { callback(optionsPtr[selected], selected); };
-    return bannerOptions;
-}
-
-} // namespace
-
 menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
@@ -226,38 +197,48 @@ void menuHandler::DeviceRolePicker()
 
 void menuHandler::RadioPresetPicker()
 {
-    static const RadioPresetOption presetOptions[] = {
-        {"Back", OptionsAction::Back},
-        {"LongTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO},
-        {"LongModerate", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE},
-        {"LongFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST},
-        {"MediumSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW},
-        {"MediumFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST},
-        {"ShortSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW},
-        {"ShortFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST},
-        {"ShortTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO},
+    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
+                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
+    enum optionsNumbers {
+        Back = 0,
+        radiopreset_LongSlow = 1,
+        radiopreset_LongModerate = 2,
+        radiopreset_LongFast = 3,
+        radiopreset_MediumSlow = 4,
+        radiopreset_MediumFast = 5,
+        radiopreset_ShortSlow = 6,
+        radiopreset_ShortFast = 7,
+        radiopreset_ShortTurbo = 8
     };
-
-    constexpr size_t presetCount = sizeof(presetOptions) / sizeof(presetOptions[0]);
-    static std::array<const char *, presetCount> presetLabels{};
-
-    auto bannerOptions =
-        createStaticBannerOptions("Radio Preset", presetOptions, presetLabels, [](const RadioPresetOption &option, int) -> void {
-            if (option.action == OptionsAction::Back) {
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Radio Preset";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 9;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Back) {
             menuHandler::menuQueue = menuHandler::lora_Menu;
             screen->runNow();
             return;
+        } else if (selected == radiopreset_LongSlow) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
+        } else if (selected == radiopreset_LongModerate) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE;
+        } else if (selected == radiopreset_LongFast) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        } else if (selected == radiopreset_MediumSlow) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW;
+        } else if (selected == radiopreset_MediumFast) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+        } else if (selected == radiopreset_ShortSlow) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW;
+        } else if (selected == radiopreset_ShortFast) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
+        } else if (selected == radiopreset_ShortTurbo) {
+            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
         }
-
-            if (!option.hasValue) {
-                return;
-            }
-
-            config.lora.modem_preset = option.value;
         service->reloadConfig(SEGMENT_CONFIG);
         rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-        });
-
+    };
     screen->showOverlayBanner(bannerOptions);
 }
 

src/graphics/draw/MenuHandler.h

@@ -99,24 +99,5 @@ class menuHandler
     static void BluetoothToggleMenu();
 };
 
-/* Generic Menu Options designations  */
-enum class OptionsAction { Back, Select };
-
-template <typename T> struct MenuOption {
-    const char *label;
-    OptionsAction action;
-    bool hasValue;
-    T value;
-
-    MenuOption(const char *labelIn, OptionsAction actionIn, T valueIn)
-        : label(labelIn), action(actionIn), hasValue(true), value(valueIn)
-    {
-    }
-
-    MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
-};
-
-using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
-
 } // namespace graphics
 #endif

src/input/InputBroker.h

@@ -53,7 +53,6 @@ typedef struct _InputEvent {
 class InputPollable
 {
   public:
-    virtual ~InputPollable() = default;
     virtual void pollOnce() = 0;
 };
 

src/input/RotaryEncoderImpl.cpp

@@ -3,9 +3,6 @@
 #include "RotaryEncoderImpl.h"
 #include "InputBroker.h"
 #include "RotaryEncoder.h"
-#ifdef ARCH_ESP32
-#include "sleep.h"
-#endif
 
 #define ORIGIN_NAME "RotaryEncoder"
 
@@ -14,20 +11,6 @@ RotaryEncoderImpl *rotaryEncoderImpl;
 RotaryEncoderImpl::RotaryEncoderImpl()
 {
     rotary = nullptr;
-#ifdef ARCH_ESP32
-    isFirstInit = true;
-#endif
-}
-
-RotaryEncoderImpl::~RotaryEncoderImpl()
-{
-    LOG_DEBUG("RotaryEncoderImpl destructor");
-    detachRotaryEncoderInterrupts();
-
-    if (rotary != nullptr) {
-        delete rotary;
-        rotary = nullptr;
-    }
 }
 
 bool RotaryEncoderImpl::init()
@@ -42,22 +25,15 @@ bool RotaryEncoderImpl::init()
     eventCcw = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_ccw);
     eventPressed = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_press);
 
-    if (rotary == nullptr) {
     rotary = new RotaryEncoder(moduleConfig.canned_message.inputbroker_pin_a, moduleConfig.canned_message.inputbroker_pin_b,
                                moduleConfig.canned_message.inputbroker_pin_press);
-    }
+    rotary->resetButton();
 
-    attachRotaryEncoderInterrupts();
-
-#ifdef ARCH_ESP32
-    // Register callbacks for before and after lightsleep
-    // Used to detach and reattach interrupts
-    if (isFirstInit) {
-        lsObserver.observe(&notifyLightSleep);
-        lsEndObserver.observe(&notifyLightSleepEnd);
-        isFirstInit = false;
-    }
-#endif
+    interruptInstance = this;
+    auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
+    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
+    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
+    attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
 
     LOG_INFO("RotaryEncoder initialized pins(%d, %d, %d), events(%d, %d, %d)", moduleConfig.canned_message.inputbroker_pin_a,
              moduleConfig.canned_message.inputbroker_pin_b, moduleConfig.canned_message.inputbroker_pin_press, eventCw, eventCcw,
@@ -95,50 +71,6 @@ void RotaryEncoderImpl::pollOnce()
     }
 }
 
-void RotaryEncoderImpl::detachRotaryEncoderInterrupts()
-{
-    LOG_DEBUG("RotaryEncoderImpl detach button interrupts");
-    if (interruptInstance == this) {
-        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_a);
-        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_b);
-        detachInterrupt(moduleConfig.canned_message.inputbroker_pin_press);
-        interruptInstance = nullptr;
-    } else {
-        LOG_WARN("RotaryEncoderImpl: interrupts already detached");
-    }
-}
-
-void RotaryEncoderImpl::attachRotaryEncoderInterrupts()
-{
-    LOG_DEBUG("RotaryEncoderImpl attach button interrupts");
-    if (rotary != nullptr && interruptInstance == nullptr) {
-        rotary->resetButton();
-
-        interruptInstance = this;
-        auto interruptHandler = []() { inputBroker->requestPollSoon(interruptInstance); };
-        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_a, interruptHandler, CHANGE);
-        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_b, interruptHandler, CHANGE);
-        attachInterrupt(moduleConfig.canned_message.inputbroker_pin_press, interruptHandler, CHANGE);
-    } else {
-        LOG_WARN("RotaryEncoderImpl: interrupts already attached");
-    }
-}
-
-#ifdef ARCH_ESP32
-
-int RotaryEncoderImpl::beforeLightSleep(void *unused)
-{
-    detachRotaryEncoderInterrupts();
-    return 0; // Indicates success;
-}
-
-int RotaryEncoderImpl::afterLightSleep(esp_sleep_wakeup_cause_t cause)
-{
-    attachRotaryEncoderInterrupts();
-    return 0; // Indicates success;
-}
-#endif
-
 RotaryEncoderImpl *RotaryEncoderImpl::interruptInstance;
 
 #endif

src/input/RotaryEncoderImpl.h

@@ -8,18 +8,12 @@
 
 class RotaryEncoder;
 
-class RotaryEncoderImpl final : public InputPollable
+class RotaryEncoderImpl : public InputPollable
 {
   public:
     RotaryEncoderImpl();
-    ~RotaryEncoderImpl() override;
-    bool init();
+    bool init(void);
     virtual void pollOnce() override;
-    // Disconnect and reconnect interrupts for light sleep
-#ifdef ARCH_ESP32
-    int beforeLightSleep(void *unused);
-    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
-#endif
 
   protected:
     static RotaryEncoderImpl *interruptInstance;
@@ -29,21 +23,6 @@ class RotaryEncoderImpl final : public InputPollable
     input_broker_event eventPressed = INPUT_BROKER_NONE;
 
     RotaryEncoder *rotary;
-
-  private:
-#ifdef ARCH_ESP32
-    bool isFirstInit;
-#endif
-    void detachRotaryEncoderInterrupts();
-    void attachRotaryEncoderInterrupts();
-
-#ifdef ARCH_ESP32
-    // Get notified when lightsleep begins and ends
-    CallbackObserver<RotaryEncoderImpl, void *> lsObserver =
-        CallbackObserver<RotaryEncoderImpl, void *>(this, &RotaryEncoderImpl::beforeLightSleep);
-    CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t> lsEndObserver =
-        CallbackObserver<RotaryEncoderImpl, esp_sleep_wakeup_cause_t>(this, &RotaryEncoderImpl::afterLightSleep);
-#endif
 };
 
 extern RotaryEncoderImpl *rotaryEncoderImpl;

src/mesh/NodeDB.cpp

@@ -805,15 +805,11 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.output_ms = 500;
     moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312)
     // Default to RAK led pin 2 (blue)
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.output = PIN_LED2;
-#if defined(MUZI_BASE)
-    moduleConfig.external_notification.active = false;
-#else
     moduleConfig.external_notification.active = true;
-#endif
     moduleConfig.external_notification.alert_message = true;
     moduleConfig.external_notification.output_ms = 1000;
     moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;

src/mesh/RadioInterface.cpp

@@ -503,11 +503,6 @@ void RadioInterface::applyModemConfig()
                 cr = 5;
                 sf = 10;
                 break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 8;
-                sf = 11;
-                break;
             default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
                 bw = (myRegion->wideLora) ? 812.5 : 250;
                 cr = 5;
@@ -544,26 +539,13 @@ void RadioInterface::applyModemConfig()
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
-            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
-            const float requestedBwKHz = bw;
-            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
-            const char *presetName =
-                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
-
-            char err_string[160];
-            if (isWideRequest) {
-                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
-                         myRegion->name, presetName);
-            } else {
-                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
-                         myRegion->name, regionSpanKHz, requestedBwKHz);
-            }
-            LOG_ERROR("%s", err_string);
+            static const char *err_string = "Regional frequency range is smaller than bandwidth. Fall back to default preset";
+            LOG_ERROR(err_string);
             RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
             meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
             cn->level = meshtastic_LogRecord_Level_ERROR;
-            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
+            sprintf(cn->message, err_string);
             service->sendClientNotification(cn);
 
             // Set to default modem preset

src/mesh/ReliableRouter.cpp

@@ -150,9 +150,7 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
         PacketId nakId = (c && c->error_reason != meshtastic_Routing_Error_NONE) ? p->decoded.request_id : 0;
 
         // We intentionally don't check wasSeenRecently, because it is harmless to delete non existent retransmission records
-        if ((ackId || nakId) &&
-            // Implicit ACKs from MQTT should not stop retransmissions
-            !(isFromUs(p) && p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MQTT)) {
+        if (ackId || nakId) {
             LOG_DEBUG("Received a %s for 0x%x, stopping retransmissions", ackId ? "ACK" : "NAK", ackId);
             if (ackId) {
                 stopRetransmission(p->to, ackId);

src/mesh/Router.cpp

@@ -526,10 +526,6 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
 #elif ARCH_PORTDUINO
         if (portduino_config.traceFilename != "" || portduino_config.logoutputlevel == level_trace) {
             LOG_TRACE("%s", MeshPacketSerializer::JsonSerialize(p, false).c_str());
-        } else if (portduino_config.JSONFilename != "") {
-            if (portduino_config.JSONFilter == (_meshtastic_PortNum)0 || portduino_config.JSONFilter == p->decoded.portnum) {
-                JSONFile << MeshPacketSerializer::JsonSerialize(p, false) << std::endl;
-            }
         }
 #endif
         return DecodeState::DECODE_SUCCESS;

src/mesh/generated/meshtastic/config.pb.h

@@ -293,8 +293,7 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
 typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
     /* Long Range - Fast */
     meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
-    /* Long Range - Slow
- Deprecated in 2.7: Unpopular slow preset. */
+    /* Long Range - Slow */
     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
     /* Very Long Range - Slow
  Deprecated in 2.5: Works only with txco and is unusably slow */
@@ -312,10 +311,7 @@ typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
     /* Short Range - Turbo
  This is the fastest preset and the only one with 500kHz bandwidth.
  It is not legal to use in all regions due to this wider bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8,
-    /* Long Range - Turbo
- This preset performs similarly to LongFast, but with 500Khz bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9
+    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8
 } meshtastic_Config_LoRaConfig_ModemPreset;
 
 typedef enum _meshtastic_Config_BluetoothConfig_PairingMode {
@@ -693,8 +689,8 @@ extern "C" {
 #define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_BR_902+1))
 
 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
-#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO
-#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO+1))
+#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO
+#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO+1))
 
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MIN meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MAX meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN

src/modules/AdminModule.cpp

@@ -417,9 +417,6 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     }
     case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
         LOG_INFO("Client requesting to enter DFU mode");
-#if HAS_SCREEN
-        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
-#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
         enterDfuMode();
 #endif

src/modules/ExternalNotificationModule.h

@@ -5,7 +5,8 @@
 #include "configuration.h"
 #include "input/InputBroker.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(CONFIG_IDF_TARGET_ESP32C6)
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&                                 \
+    !defined(CONFIG_IDF_TARGET_ESP32H2)
 #include <NonBlockingRtttl.h>
 #else
 // Noop class for portduino.

src/modules/Modules.cpp

@@ -217,7 +217,7 @@ void setupModules()
     }
 #endif // HAS_BUTTON
 #if ARCH_PORTDUINO
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         seesawRotary = new SeesawRotary("SeesawRotary");
         if (!seesawRotary->init()) {
             delete seesawRotary;

src/modules/PositionModule.cpp

@@ -45,12 +45,8 @@ bool PositionModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 {
     auto p = *pptr;
 
-    const auto transport = mp.transport_mechanism;
-    if (isFromUs(&mp) && !IS_ONE_OF(transport, meshtastic_MeshPacket_TransportMechanism_TRANSPORT_INTERNAL,
-                                    meshtastic_MeshPacket_TransportMechanism_TRANSPORT_API)) {
-        LOG_WARN("Ignoring packet supposedly from us over external transport");
-        return true;
-    }
+    // If inbound message is a replay (or spoof!) of our own messages, we shouldn't process
+    // (why use second-hand sources for our own data?)
 
     // FIXME this can in fact happen with packets sent from EUD (src=RX_SRC_USER)
     // to set fixed location, EUD-GPS location or just the time (see also issue #900)
@@ -476,53 +472,19 @@ void PositionModule::sendLostAndFoundText()
     delete[] message;
 }
 
-// Helper: return imprecise (truncated + centered) lat/lon as int32 using current precision
-static inline void computeImpreciseLatLon(int32_t inLat, int32_t inLon, uint8_t precisionBits, int32_t &outLat, int32_t &outLon)
-{
-    if (precisionBits > 0 && precisionBits < 32) {
-        // Build mask for top 'precisionBits' bits of a 32-bit unsigned field
-        const uint32_t mask = (precisionBits == 32) ? UINT32_MAX : (UINT32_MAX << (32 - precisionBits));
-        // Note: latitude_i/longitude_i are stored as signed 32-bit in meshtastic code but
-        // the bitmask logic used previously operated as unsigned—preserve that behavior by
-        // casting to uint32_t for masking, then back to int32_t.
-        uint32_t lat_u = static_cast<uint32_t>(inLat) & mask;
-        uint32_t lon_u = static_cast<uint32_t>(inLon) & mask;
-
-        // Add the "center of cell" offset used elsewhere:
-        // The code previously added (1 << (31 - precision)) to produce the middle of the possible location.
-        uint32_t center_offset = (1u << (31 - precisionBits));
-        lat_u += center_offset;
-        lon_u += center_offset;
-
-        outLat = static_cast<int32_t>(lat_u);
-        outLon = static_cast<int32_t>(lon_u);
-    } else {
-        // full precision: return input unchanged
-        outLat = inLat;
-        outLon = inLon;
-    }
-}
-
 struct SmartPosition PositionModule::getDistanceTraveledSinceLastSend(meshtastic_PositionLite currentPosition)
 {
+    // The minimum distance to travel before we are able to send a new position packet.
     const uint32_t distanceTravelThreshold =
         Default::getConfiguredOrDefault(config.position.broadcast_smart_minimum_distance, 100);
 
-    int32_t lastLatImprecise, lastLonImprecise;
-    int32_t currentLatImprecise, currentLonImprecise;
+    // Determine the distance in meters between two points on the globe
+    float distanceTraveledSinceLastSend = GeoCoord::latLongToMeter(
+        lastGpsLatitude * 1e-7, lastGpsLongitude * 1e-7, currentPosition.latitude_i * 1e-7, currentPosition.longitude_i * 1e-7);
 
-    computeImpreciseLatLon(lastGpsLatitude, lastGpsLongitude, precision, lastLatImprecise, lastLonImprecise);
-    computeImpreciseLatLon(currentPosition.latitude_i, currentPosition.longitude_i, precision, currentLatImprecise,
-                           currentLonImprecise);
-
-    float distMeters = GeoCoord::latLongToMeter(lastLatImprecise * 1e-7, lastLonImprecise * 1e-7, currentLatImprecise * 1e-7,
-                                                currentLonImprecise * 1e-7);
-
-    float distanceTraveled = fabsf(distMeters);
-
-    return SmartPosition{.distanceTraveled = distanceTraveled,
+    return SmartPosition{.distanceTraveled = abs(distanceTraveledSinceLastSend),
                          .distanceThreshold = distanceTravelThreshold,
-                         .hasTraveledOverThreshold = distanceTraveled >= distanceTravelThreshold};
+                         .hasTraveledOverThreshold = abs(distanceTraveledSinceLastSend) >= distanceTravelThreshold};
 }
 
 void PositionModule::handleNewPosition()

src/modules/RoutingModule.cpp

@@ -75,12 +75,6 @@ uint8_t RoutingModule::getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit
     return Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit); // Use the default hop limit
 }
 
-meshtastic_MeshPacket *RoutingModule::allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex,
-                                                  uint8_t hopLimit)
-{
-    return MeshModule::allocAckNak(err, to, idFrom, chIndex, hopLimit);
-}
-
 RoutingModule::RoutingModule() : ProtobufModule("routing", meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
 {
     isPromiscuous = true;

src/modules/RoutingModule.h

@@ -16,9 +16,6 @@ class RoutingModule : public ProtobufModule<meshtastic_Routing>
     virtual void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit = 0,
                             bool ackWantsAck = false);
 
-    meshtastic_MeshPacket *allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex,
-                                       uint8_t hopLimit = 0);
-
     // Given the hopStart and hopLimit upon reception of a request, return the hop limit to use for the response
     uint8_t getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit);
 

src/modules/SerialModule.cpp

@@ -71,7 +71,7 @@ SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial
     api_type = TYPE_SERIAL;
 }
 static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172) || defined(EBYTE_E77_MBL)
+#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172) || defined(EBYTE_E77_MBL) || defined(CONFIG_IDF_TARGET_ESP32H2)
 SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial")
 {
     api_type = TYPE_SERIAL;
@@ -175,7 +175,7 @@ int32_t SerialModule::runOnce()
                 // Give it a chance to flush out 💩
                 delay(10);
             }
-#if defined(CONFIG_IDF_TARGET_ESP32C6)
+#if defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
                 Serial1.setRxBufferSize(RX_BUFFER);
                 Serial1.begin(baud, SERIAL_8N1, moduleConfig.serial.rxd, moduleConfig.serial.txd);
@@ -277,7 +277,7 @@ int32_t SerialModule::runOnce()
             }
 #endif
             else {
-#if defined(CONFIG_IDF_TARGET_ESP32C6)
+#if defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2)
                 while (Serial1.available()) {
                     serialPayloadSize = Serial1.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #else
@@ -538,7 +538,7 @@ void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
     !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
-    !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
+    !defined(ARCH_STM32WL) && !defined(MUZI_BASE) && !defined(CONFIG_IDF_TARGET_ESP32H2)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/mqtt/MQTT.cpp

@@ -87,13 +87,10 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
         // Generate an implicit ACK towards ourselves (handled and processed only locally!) for this message.
         // We do this because packets are not rebroadcasted back into MQTT anymore and we assume that at least one node
         // receives it when we get our own packet back. Then we'll stop our retransmissions.
-        if (isFromUs(e.packet)) {
-            auto pAck = routingModule->allocAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
-            pAck->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_MQTT;
-            router->sendLocal(pAck);
-        } else {
+        if (isFromUs(e.packet))
+            routingModule->sendAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
+        else
             LOG_INFO("Ignore downlink message we originally sent");
-        }
         return;
     }
     if (isFromUs(e.packet)) {

src/platform/esp32/main-esp32.cpp

@@ -169,6 +169,8 @@ void esp32Setup()
 // #define APP_WATCHDOG_SECS 45
 #define APP_WATCHDOG_SECS 90
 
+// esp_task_wdt_init returns an unknown error, so skip it on ESP32H2
+#ifndef CONFIG_IDF_TARGET_ESP32H2
 #ifdef CONFIG_IDF_TARGET_ESP32C6
     esp_task_wdt_config_t *wdt_config = (esp_task_wdt_config_t *)malloc(sizeof(esp_task_wdt_config_t));
     wdt_config->timeout_ms = APP_WATCHDOG_SECS * 1000;
@@ -181,7 +183,7 @@ void esp32Setup()
 #endif
     res = esp_task_wdt_add(NULL);
     assert(res == ESP_OK);
-
+#endif
 #if HAS_32768HZ
     enableSlowCLK();
 #endif
@@ -223,9 +225,10 @@ void cpuDeepSleep(uint32_t msecToWake)
         13,
 #endif
         34, 35, 37};
-
+#ifndef CONFIG_IDF_TARGET_ESP32H2
     for (int i = 0; i < sizeof(rtcGpios); i++)
         rtc_gpio_isolate((gpio_num_t)rtcGpios[i]);
+#endif
 #endif
 
         // FIXME, disable internal rtc pullups/pulldowns on the non isolated pins. for inputs that we aren't using
@@ -258,10 +261,10 @@ void cpuDeepSleep(uint32_t msecToWake)
 
 #endif // #end ESP32S3_WAKE_TYPE
 #endif
-
+#ifdef ESP_PD_DOMAIN_RTC_PERIPH
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
-
+#endif
     esp_sleep_enable_timer_wakeup(msecToWake * 1000ULL); // call expects usecs
     esp_deep_sleep_start();                              // TBD mA sleep current (battery)
 }

src/platform/portduino/PortduinoGlue.cpp

@@ -29,7 +29,6 @@
 
 portduino_config_struct portduino_config;
 std::ofstream traceFile;
-std::ofstream JSONFile;
 Ch341Hal *ch341Hal = nullptr;
 char *configPath = nullptr;
 char *optionMac = nullptr;
@@ -464,7 +463,6 @@ void portduinoSetup()
     if (portduino_config.lora_spi_dev != "" && portduino_config.lora_spi_dev != "ch341") {
         SPI.begin(portduino_config.lora_spi_dev.c_str());
     }
-
     if (portduino_config.traceFilename != "") {
         try {
             traceFile.open(portduino_config.traceFilename, std::ios::out | std::ios::app);
@@ -472,21 +470,6 @@ void portduinoSetup()
             std::cout << "*** traceFile Exception " << e.what() << std::endl;
             exit(EXIT_FAILURE);
         }
-        if (!traceFile.is_open()) {
-            std::cout << "*** traceFile open failure" << std::endl;
-            exit(EXIT_FAILURE);
-        }
-    } else if (portduino_config.JSONFilename != "") {
-        try {
-            JSONFile.open(portduino_config.JSONFilename, std::ios::out | std::ios::app);
-        } catch (std::ofstream::failure &e) {
-            std::cout << "*** JSONFile Exception " << e.what() << std::endl;
-            exit(EXIT_FAILURE);
-        }
-        if (!JSONFile.is_open()) {
-            std::cout << "*** JSONFile open failure" << std::endl;
-            exit(EXIT_FAILURE);
-        }
     }
     if (verboseEnabled && portduino_config.logoutputlevel != level_trace) {
         portduino_config.logoutputlevel = level_debug;
@@ -534,29 +517,6 @@ bool loadConfig(const char *configPath)
                 portduino_config.logoutputlevel = level_error;
             }
             portduino_config.traceFilename = yamlConfig["Logging"]["TraceFile"].as<std::string>("");
-            portduino_config.JSONFilename = yamlConfig["Logging"]["JSONFile"].as<std::string>("");
-            portduino_config.JSONFilter = (_meshtastic_PortNum)yamlConfig["Logging"]["JSONFilter"].as<int>(0);
-            if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "textmessage")
-                portduino_config.JSONFilter = meshtastic_PortNum_TEXT_MESSAGE_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "telemetry")
-                portduino_config.JSONFilter = meshtastic_PortNum_TELEMETRY_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "nodeinfo")
-                portduino_config.JSONFilter = meshtastic_PortNum_NODEINFO_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "position")
-                portduino_config.JSONFilter = meshtastic_PortNum_POSITION_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "waypoint")
-                portduino_config.JSONFilter = meshtastic_PortNum_WAYPOINT_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "neighborinfo")
-                portduino_config.JSONFilter = meshtastic_PortNum_NEIGHBORINFO_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "traceroute")
-                portduino_config.JSONFilter = meshtastic_PortNum_TRACEROUTE_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "detection")
-                portduino_config.JSONFilter = meshtastic_PortNum_DETECTION_SENSOR_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "paxcounter")
-                portduino_config.JSONFilter = meshtastic_PortNum_PAXCOUNTER_APP;
-            else if (yamlConfig["Logging"]["JSONFilter"].as<std::string>("") == "remotehardware")
-                portduino_config.JSONFilter = meshtastic_PortNum_REMOTE_HARDWARE_APP;
-
             if (yamlConfig["Logging"]["AsciiLogs"]) {
                 // Default is !isatty(1) but can be set explicitly in config.yaml
                 portduino_config.ascii_logs = yamlConfig["Logging"]["AsciiLogs"].as<bool>();

src/platform/portduino/PortduinoGlue.h

@@ -5,7 +5,6 @@
 
 #include "LR11x0Interface.h"
 #include "Module.h"
-#include "mesh/generated/meshtastic/mesh.pb.h"
 #include "platform/portduino/USBHal.h"
 #include "yaml-cpp/yaml.h"
 
@@ -47,8 +46,6 @@ struct pinMapping {
 };
 
 extern std::ofstream traceFile;
-extern std::ofstream JSONFile;
-
 extern Ch341Hal *ch341Hal;
 int initGPIOPin(int pinNum, std::string gpioChipname, int line);
 bool loadConfig(const char *configPath);
@@ -151,9 +148,6 @@ extern struct portduino_config_struct {
     bool ascii_logs = !isatty(1);
     bool ascii_logs_explicit = false;
 
-    std::string JSONFilename;
-    meshtastic_PortNum JSONFilter = (_meshtastic_PortNum)0;
-
     // Webserver
     std::string webserver_root_path = "";
     std::string webserver_ssl_key_path = "/etc/meshtasticd/ssl/private_key.pem";
@@ -419,29 +413,6 @@ extern struct portduino_config_struct {
         }
         if (traceFilename != "")
             out << YAML::Key << "TraceFile" << YAML::Value << traceFilename;
-        if (JSONFilename != "") {
-            out << YAML::Key << "JSONFile" << YAML::Value << JSONFilename;
-            if (JSONFilter == meshtastic_PortNum_TEXT_MESSAGE_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "textmessage";
-            else if (JSONFilter == meshtastic_PortNum_TELEMETRY_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "telemetry";
-            else if (JSONFilter == meshtastic_PortNum_NODEINFO_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "nodeinfo";
-            else if (JSONFilter == meshtastic_PortNum_POSITION_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "position";
-            else if (JSONFilter == meshtastic_PortNum_WAYPOINT_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "waypoint";
-            else if (JSONFilter == meshtastic_PortNum_NEIGHBORINFO_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "neighborinfo";
-            else if (JSONFilter == meshtastic_PortNum_TRACEROUTE_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "traceroute";
-            else if (JSONFilter == meshtastic_PortNum_DETECTION_SENSOR_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "detection";
-            else if (JSONFilter == meshtastic_PortNum_PAXCOUNTER_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "paxcounter";
-            else if (JSONFilter == meshtastic_PortNum_REMOTE_HARDWARE_APP)
-                out << YAML::Key << "JSONFilter" << YAML::Value << "remotehardware";
-        }
         if (ascii_logs_explicit) {
             out << YAML::Key << "AsciiLogs" << YAML::Value << ascii_logs;
         }

src/sleep.cpp

@@ -388,10 +388,10 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     uint64_t sleepUsec = sleepMsec * 1000LL;
 
     // NOTE! ESP docs say we must disable bluetooth and wifi before light sleep
-
+#ifdef ESP_PD_DOMAIN_RTC_PERIPH
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);
-
+#endif
 #if defined(BUTTON_PIN) && defined(BUTTON_NEED_PULLUP)
     gpio_pullup_en((gpio_num_t)BUTTON_PIN);
 #endif
@@ -523,6 +523,8 @@ void enableModemSleep()
     esp32_config.max_freq_mhz = CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ;
 #elif CONFIG_IDF_TARGET_ESP32C6
     esp32_config.max_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ;
+#elif CONFIG_IDF_TARGET_ESP32H2
+    esp32_config.max_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ;
 #elif CONFIG_IDF_TARGET_ESP32C3
     esp32_config.max_freq_mhz = CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ;
 #else

test/test_mqtt/MQTT.cpp

@@ -605,13 +605,12 @@ void test_receiveAcksOwnSentMessages(void)
 
     unitTest->publish(&p, nodeDB->getNodeId().c_str());
 
-    // FIXME: Better assertion for this test
-    // TEST_ASSERT_TRUE(mockRouter->packets_.empty());
-    // TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
-    // const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
-    // TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
-    // TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
-    // TEST_ASSERT_EQUAL(p.id, idFrom);
+    TEST_ASSERT_TRUE(mockRouter->packets_.empty());
+    TEST_ASSERT_EQUAL(1, mockRoutingModule->ackNacks_.size());
+    const auto &[err, to, idFrom, chIndex, hopLimit] = mockRoutingModule->ackNacks_.front();
+    TEST_ASSERT_EQUAL(meshtastic_Routing_Error_NONE, err);
+    TEST_ASSERT_EQUAL(myNodeInfo.my_node_num, to);
+    TEST_ASSERT_EQUAL(p.id, idFrom);
 }
 
 // Should ignore our own messages from MQTT that were heard by other nodes.

variants/esp32/betafpv_2400_tx_micro/platformio.ini

@@ -15,4 +15,4 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
   ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32/betafpv_900_tx_nano/platformio.ini

@@ -13,3 +13,5 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
+lib_deps =
+  ${esp32_base.lib_deps}

variants/esp32/chatter2/platformio.ini

@@ -9,4 +9,4 @@ build_flags =
   
 lib_deps =
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32/diy/dr-dev/platformio.ini

@@ -2,7 +2,6 @@
 [env:meshtastic-dr-dev]
 extends = esp32_base
 board = esp32doit-devkit-v1
-board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =

variants/esp32/esp32.ini

@@ -5,7 +5,7 @@ custom_esp32_kind = esp32
 custom_mtjson_part =
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.12.0
+  platformio/espressif32@6.11.0
 
 extra_scripts =
   ${env.extra_scripts}
@@ -59,7 +59,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@1.4.3
+  h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib

variants/esp32/m5stack_core/platformio.ini

@@ -25,4 +25,4 @@ lib_ignore =
   m5stack-core
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32/m5stack_coreink/platformio.ini

@@ -18,8 +18,8 @@ build_flags =
   -DM5STACK
 lib_deps = 
   ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@1.6.5
-  lewisxhe/PCF8563_Library@1.0.1
+  zinggjm/GxEPD2@^1.6.2
+  lewisxhe/PCF8563_Library@^1.0.1
 lib_ignore =
   m5stack-coreink
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -2,6 +2,8 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1_EXPLORER

variants/esp32/nano-g1/platformio.ini

@@ -2,6 +2,8 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D NANO_G1

variants/esp32/radiomaster_900_bandit_micro/platformio.ini

@@ -15,3 +15,5 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
+lib_deps =
+  ${esp32_base.lib_deps}

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -10,3 +10,5 @@ build_flags =
   -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
+lib_deps =
+  ${esp32_base.lib_deps}

variants/esp32/station-g1/platformio.ini

@@ -2,6 +2,8 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags}
   -D STATION_G1

variants/esp32/tbeam/platformio.ini

@@ -2,8 +2,9 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
-board_level = extra
+board_level = pr
 board_check = true
+lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
   -I variants/esp32/tbeam

variants/esp32/wiphone/platformio.ini

@@ -10,6 +10,6 @@ build_flags =
   -I variants/esp32/wiphone
 lib_deps = 
   ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
-  sparkfun/SX1509 IO Expander@3.0.6
-  pololu/APA102@3.0.0
+  lovyan03/LovyanGFX@^1.2.0
+  sparkfun/SX1509 IO Expander@^3.0.5
+  pololu/APA102@^3.0.0

variants/esp32c3/diy/esp32c3_super_mini/platformio.ini

@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/diy/esp32c3_super_mini
   -D ARDUINO_USB_MODE=1

variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -D ARDUINO_USB_MODE=1
   -D ARDUINO_USB_CDC_ON_BOOT=1

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D HELTEC_HT62
   -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200

variants/esp32c3/heltec_hru_3601/platformio.ini

@@ -2,8 +2,8 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D HELTEC_HRU_3601
   -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32c3/m5stack-stamp-c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -12,8 +12,8 @@ build_unflags =
   -D HAS_WIFI
 lib_deps =
   ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@1.15.2
-  h2zero/NimBLE-Arduino@2.3.7
+  adafruit/Adafruit NeoPixel@^1.12.3
+  h2zero/NimBLE-Arduino@^2.3.6
 build_flags = 
   ${esp32c6_base.build_flags}
   -D M5STACK_UNITC6L

variants/esp32h2/esp32h2.ini

@@ -0,0 +1,47 @@
+[esp32h2_base]
+extends = esp32_base
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/39475a7213fa3a52b0c2048d1a31c215fc85fcf8.zip
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.1
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} -<mesh/http> 
+
+monitor_speed = 460800
+monitor_filters = esp32_h2_exception_decoder
+
+lib_ignore =
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  

variants/esp32h2/waveshare-esp32-h2/platformio.ini

@@ -0,0 +1,11 @@
+[env:waveshare-esp32h2]
+extends = esp32h2_base
+board = esp32-h2-devkitm-1
+board_build.f_flash = 16000000L
+board_level = pr
+build_flags = 
+  ${esp32h2_base.build_flags}
+  -I variants/esp32h2/waveshare-esp32-h2
+  -DARDUINO_USB_CDC_ON_BOOT=1
+  -DARDUINO_USB_MODE=1
+  -DHAS_WIFI=0

variants/esp32h2/waveshare-esp32-h2/variant.h

@@ -0,0 +1,8 @@
+
+#define HAS_SCREEN 0
+#define HAS_WIFI 0
+
+#define LORA_SCK 4
+#define LORA_MISO 3
+#define LORA_MOSI 2
+#define LORA_CS 1

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -17,5 +17,5 @@ build_flags =
 
 lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@1.0.1
-  maxpromer/PCA9557-arduino@1.0.0
+  lewisxhe/PCF8563_Library@^1.0.1
+  maxpromer/PCA9557-arduino @ ^1.0.0

variants/esp32s3/bpi_picow_esp32_s3/platformio.ini

@@ -8,9 +8,9 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32s3_base.lib_deps}
-  caveman99/ESP32 Codec2@1.0.1
+  ${esp32_base.lib_deps}
+  caveman99/ESP32 Codec2@^1.0.1
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/bpi_picow_esp32_s3

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -9,14 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 lib_deps =
-  ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@1.6.5
-  adafruit/Adafruit NeoPixel@1.15.2
+  ${esp32_base.lib_deps}
+  zinggjm/GxEPD2@^1.6.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_eink
   -Dmy

variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini

@@ -9,13 +9,13 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 lib_deps =
-  ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel@1.15.2
+  ${esp32_base.lib_deps}
+  adafruit/Adafruit NeoPixel @ ^1.12.0
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/diy/my_esp32s3_diy_oled
   -DBOARD_HAS_PSRAM

variants/esp32s3/dreamcatcher/platformio.ini

@@ -12,8 +12,8 @@ build_flags =
   -D ARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@1.9.9
-  earlephilhower/ESP8266SAM@1.1.0
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
 
 [env:dreamcatcher-2206] 
 extends = esp32s3_base

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -22,5 +22,5 @@ build_flags = ${esp32s3_base.build_flags}
   -DEINK_HEIGHT=128
 
 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@1.6.5
-  adafruit/Adafruit NeoPixel@1.15.2
+  zinggjm/GxEPD2@^1.6.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32s3/heltec_sensor_hub/platformio.ini

@@ -9,4 +9,4 @@ build_flags =
   -D HELTEC_SENSOR_HUB
 
 lib_deps = ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32s3/heltec_v4/platformio.ini

@@ -7,6 +7,8 @@ build_flags =
   ${esp32s3_base.build_flags}
   -D HELTEC_V4
   -I variants/esp32s3/heltec_v4
+lib_deps = 
+  ${esp32s3_base.lib_deps}
 
 
 [env:heltec-v4]

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -18,7 +18,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e213-inkhud]
@@ -27,7 +27,7 @@ board = heltec_vision_master_e213
 board_level = pr
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32s3_base.build_src_filter}
+  ${esp32_base.build_src_filter}
   ${inkhud.build_src_filter}
 build_flags =  
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -21,7 +21,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
 
 [env:heltec-vision-master-e290-inkhud]
@@ -29,7 +29,7 @@ extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
 build_src_filter = 
-  ${esp32s3_base.build_src_filter}
+  ${esp32_base.build_src_filter} 
   ${inkhud.build_src_filter}
 build_flags = 
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -8,6 +8,6 @@ build_flags =
   -D HELTEC_VISION_MASTER_T190
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1
   https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -19,7 +19,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
 
 [env:heltec-wireless-paper-inkhud]
@@ -27,7 +27,7 @@ extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32s3_base.build_src_filter}
+  ${esp32_base.build_src_filter} 
   ${inkhud.build_src_filter}
 build_flags =
   ${esp32s3_base.build_flags}

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -16,5 +16,5 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -12,4 +12,4 @@ build_flags =
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -11,4 +11,4 @@ build_flags =
   ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -10,4 +10,4 @@ build_flags =
   -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0

variants/esp32s3/icarus/platformio.ini

@@ -8,6 +8,8 @@ board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
+lib_deps =
+  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/link32_s3_v1/platformio.ini

@@ -1,9 +1,8 @@
 [env:link32-s3-v1]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
-board_level = extra
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D LINK_32
   -I variants/esp32s3/link32_s3_v1
   -DARDUINO_USB_CDC_ON_BOOT

variants/esp32s3/m5stack_cores3/platformio.ini

@@ -6,7 +6,8 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags} 
   -D PRIVATE_HW
   -D M5STACK_CORES3
   -I variants/esp32s3/m5stack_cores3
+lib_deps = ${esp32_base.lib_deps}

variants/esp32s3/mesh-tab/platformio.ini

@@ -46,11 +46,11 @@ build_flags = ${esp32s3_base.build_flags}
   -D VIEW_320x240
   -D USE_PACKET_API
   -I variants/esp32s3/mesh-tab
-build_src_filter = ${esp32s3_base.build_src_filter}
+build_src_filter = ${esp32_base.build_src_filter}
 lib_deps =
-  ${esp32s3_base.lib_deps}
+  ${esp32_base.lib_deps}
   ${device-ui_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0
 
 [mesh_tab_xpt2046]
 extends = mesh_tab_base

variants/esp32s3/nibble_esp32/platformio.ini

@@ -3,6 +3,6 @@ extends = esp32s3_base
 board = esp32-s3-zero
 board_level = extra
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/esp32s3/nibble_esp32

variants/esp32s3/picomputer-s3/platformio.ini

@@ -15,7 +15,7 @@ build_flags =
 
 lib_deps = 
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}

variants/esp32s3/rak3312/platformio.ini

@@ -6,6 +6,6 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags}
   -D RAK3312
   -I variants/esp32s3/rak3312

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -8,14 +8,14 @@ upload_protocol = esptool
 board_build.partitions = default_8MB.csv
 
 build_flags = 
-  ${esp32s3_base.build_flags}
+  ${esp32_base.build_flags} 
   -D RAK3312
   -D RAK_WISMESH_TAP_V2 
   -I variants/esp32s3/rak_wismesh_tap_v2
 
 lib_deps =
   ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@^1.2.0
 
 [ft5x06]
 extends = mesh_tab_base

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -9,7 +9,7 @@ board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool
 
-build_flags = ${esp32s3_base.build_flags}
+build_flags = ${esp32_base.build_flags}
   -Ivariants/esp32s3/seeed-sensecap-indicator
   -DSENSECAP_INDICATOR
   -DCONFIG_ARDUHAL_LOG_COLORS
@@ -25,8 +25,8 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
-  earlephilhower/ESP8266Audio@1.9.9
-  earlephilhower/ESP8266SAM@1.1.0
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
 
 
 [env:seeed-sensecap-indicator-tft]

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -6,6 +6,8 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
+lib_deps =
+  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/station-g2/platformio.ini

@@ -8,6 +8,8 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
+lib_deps =
+  ${esp32s3_base.lib_deps}
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1