Merge branch 'develop' into ble-Banner

Fixes ClosedCube reinstalling on every build

.github/actionlint.yaml

@@ -2,4 +2,5 @@
 self-hosted-runner:
   # Labels of self-hosted runner in array of strings.
   labels:
+    - arctastic
     - test-runner

.github/workflows/build_firmware.yml

@@ -18,7 +18,8 @@ permissions: read-all
 jobs:
   pio-build:
     name: build-${{ inputs.platform }}
-    runs-on: ubuntu-24.04
+    # Use 'arctastic' self-hosted runner pool when building in the main repo
+    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:

.github/workflows/build_one_target.yml

@@ -139,8 +139,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

.github/workflows/main_matrix.yml

@@ -207,8 +207,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
@@ -280,9 +280,9 @@ jobs:
 
       - name: Generate Release manifest
         run: |
-          jq -n --arg ver "${{ needs.version.outputs.long }}" --arg targets "${{ toJson(needs.setup.outputs.all) }}" '{
+          jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
             "version": $ver,
-            "targets": ($targets | fromjson)
+            "targets": $targets
           }' > firmware-${{ needs.version.outputs.long }}.json
 
       - name: Save Release manifest artifact
@@ -338,8 +338,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

.github/workflows/merge_queue.yml

@@ -188,8 +188,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
@@ -303,8 +303,8 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
+          chmod +x ./output/device-install.sh || true
+          chmod +x ./output/device-update.sh || true
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

.github/workflows/release_channels.yml

@@ -102,7 +102,7 @@ jobs:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 
       - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version

.github/workflows/update_protobufs.yml

@@ -31,7 +31,7 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v8
+        uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
           labels: submodules

.trunk/trunk.yaml

@@ -9,24 +9,24 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.495
-    - renovate@42.42.2
+    - renovate@42.30.4
     - prettier@3.7.4
-    - trufflehog@3.92.1
+    - trufflehog@3.91.2
     - yamllint@1.37.1
     - bandit@1.9.2
-    - trivy@0.68.1
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.8
+    - ruff@0.14.7
     - isort@7.0.0
     - markdownlint@0.46.0
-    - oxipng@10.0.0
+    - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.12.0
+    - black@25.11.0
     - git-diff-check
     - gitleaks@8.30.0
     - clang-format@16.0.3

bin/exception_decoder.py

@@ -75,7 +75,7 @@ TOOLS = {
 }
 
 BACKTRACE_REGEX = re.compile(
-    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+    r"\b(0x4[0-9a-fA-F]{7,8}):0x[0-9a-fA-F]{8}\b"
 )
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
 COUNTER_REGEX = re.compile(
@@ -89,7 +89,7 @@ POINTER_REGEX = re.compile(
 STACK_BEGIN = ">>>stack>>>"
 STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+    r"^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
 )
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
@@ -223,7 +223,7 @@ class AddressResolver(object):
             if match is None:
                 if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += "\n  \-> inlined by: " + line
+                    self._address_map[last] += "\n  \\-> inlined by: " + line
                 continue
 
             if match.group("result") == "?? ??:0":

extra_scripts/esp32_extra.py

@@ -10,12 +10,6 @@ Import("env")
 platform = env.PioPlatform()
 
 sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-# IntelHex workaround, remove after fixed upstream
-# https://github.com/platformio/platform-espressif32/issues/1632
-try:
-    import intelhex
-except ImportError:
-    env.Execute("$PYTHONEXE -m pip install intelhex")
 import esptool
 
 

platformio.ini

@@ -123,7 +123,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/14dc991a4b57066e0a83599be1a87ff08e5e5308.zip
+	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -207,7 +207,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	ClosedCube OPT3001@1.1.2
+	closedcube/ClosedCube OPT3001@1.1.2
 	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
 	boschsensortec/bsec2@1.10.2610
 	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library

src/configuration.h

@@ -269,9 +269,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
-// used for display brightness control
-#define STC8H1K28_ADDR 0x30
-
 // -----------------------------------------------------------------------------
 // Touchscreen
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.h

@@ -61,7 +61,6 @@ class ScanI2C
         NAU7802,
         FT6336U,
         STK8BAXX,
-        STC8H1K28,
         ICM20948,
         SCD4X,
         MAX30102,

src/detect/ScanI2CTwoWire.cpp

@@ -234,8 +234,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 #ifdef HAS_LP5562
                 SCAN_SIMPLE_CASE(LP5562_ADDR, LP5562, "LP5562", (uint8_t)addr.address);
-#else
-                SCAN_SIMPLE_CASE(STC8H1K28_ADDR, LP5562, "STC8H1K28", (uint8_t)addr.address);
 #endif
             case XPOWERS_AXP192_AXP2101_ADDRESS:
                 // Do we have the axp2101/192 or the TCA8418

src/graphics/Screen.cpp

@@ -174,7 +174,7 @@ void Screen::showOverlayBanner(BannerOverlayOptions banner_overlay_options)
     NotificationRenderer::pauseBanner = false;
     NotificationRenderer::current_notification_type = notificationTypeEnum::selection_picker;
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 2);
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -196,7 +196,7 @@ void Screen::showNodePicker(const char *message, uint32_t durationMs, std::funct
     NotificationRenderer::current_notification_type = notificationTypeEnum::node_picker;
 
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 2);
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -220,7 +220,7 @@ void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t
     NotificationRenderer::currentNumber = 0;
 
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 2);
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -243,7 +243,7 @@ void Screen::showTextInput(const char *header, const char *initialText, uint32_t
 
     // Set the overlay using the same pattern as other notification types
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 2);
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -611,7 +611,7 @@ void Screen::setup()
     static OverlayCallback overlays[] = {
         graphics::UIRenderer::drawNavigationBar // Custom indicator icons for each frame
     };
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 1);
 
     // === Enable UTF-8 to display mapping ===
     dispdev->setFontTableLookupFunction(customFontTableLookup);
@@ -1181,7 +1181,7 @@ void Screen::setFrames(FrameFocus focus)
 
     // Add overlays: frame icons and alert banner)
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+    ui->setOverlays(overlays, 2);
 
     prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
 
@@ -1649,7 +1649,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
         NotificationRenderer::inEvent = *event;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+        ui->setOverlays(overlays, 2);
         setFastFramerate(); // Draw ASAP
         ui->update();
         return 0;
@@ -1664,7 +1664,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     if (NotificationRenderer::isOverlayBannerShowing()) {
         NotificationRenderer::inEvent = *event;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
+        ui->setOverlays(overlays, 2);
         setFastFramerate(); // Draw ASAP
         ui->update();
 

src/nimble/NimbleBluetooth.cpp

@@ -573,51 +573,30 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     virtual uint32_t onPassKeyRequest()
 #endif
     {
-        uint32_t passkey = config.bluetooth.fixed_pin;
+        uint32_t configuredPasskey = config.bluetooth.fixed_pin;
 
         if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
             LOG_INFO("Use random passkey");
             // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
-            passkey = random(100000, 999999);
+            configuredPasskey = random(100000, 999999);
         }
-        LOG_INFO("*** Enter passkey %d on the peer side ***", passkey);
+        LOG_INFO("*** Enter passkey %d on the peer side ***", configuredPasskey);
 
         powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
-        meshtastic::BluetoothStatus newStatus(std::to_string(passkey));
+        std::string passkey = std::to_string(configuredPasskey);
+        meshtastic::BluetoothStatus newStatus(passkey);
         bluetoothStatus->updateStatus(&newStatus);
 
 #if HAS_SCREEN // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (screen) {
-            screen->startAlert([passkey](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
-                char btPIN[16] = "888888";
-                snprintf(btPIN, sizeof(btPIN), "%06u", passkey);
-                int x_offset = display->width() / 2;
-                int y_offset = display->height() <= 80 ? 0 : 12;
-                display->setTextAlignment(TEXT_ALIGN_CENTER);
-                display->setFont(FONT_MEDIUM);
-                display->drawString(x_offset + x, y_offset + y, "Bluetooth");
-#if !defined(M5STACK_UNITC6L)
-                display->setFont(FONT_SMALL);
-                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM - 4 : y_offset + FONT_HEIGHT_MEDIUM + 5;
-                display->drawString(x_offset + x, y_offset + y, "Enter this code");
-#endif
-                display->setFont(FONT_LARGE);
-                char pin[8];
-                snprintf(pin, sizeof(pin), "%.3s %.3s", btPIN, btPIN + 3);
-                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_SMALL - 5 : y_offset + FONT_HEIGHT_SMALL + 5;
-                display->drawString(x_offset + x, y_offset + y, pin);
 
-                display->setFont(FONT_SMALL);
-                char deviceName[64];
-                snprintf(deviceName, sizeof(deviceName), "Name: %s", getDeviceName());
-                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_LARGE - 6 : y_offset + FONT_HEIGHT_LARGE + 5;
-                display->drawString(x_offset + x, y_offset + y, deviceName);
-            });
+            std::string ble_message = "Bluetooth\nPIN\n" + passkey.substr(0, 3) + " " + passkey.substr(3, 6);
+            screen->showSimpleBanner(ble_message.c_str(), 30000);
         }
 #endif
         passkeyShowing = true;
 
-        return passkey;
+        return configuredPasskey;
     }
 
 #ifdef NIMBLE_TWO

src/platform/nrf52/NRF52Bluetooth.cpp

@@ -64,16 +64,6 @@ void onConnect(uint16_t conn_handle)
     connection->getPeerName(central_name, sizeof(central_name));
     LOG_INFO("BLE Connected to %s", central_name);
 
-    // negotiate connections params as soon as possible
-
-    ble_gap_conn_params_t newParams;
-    newParams.min_conn_interval = 24;
-    newParams.max_conn_interval = 40;
-    newParams.slave_latency = 5;
-    newParams.conn_sup_timeout = 400;
-
-    sd_ble_gap_conn_param_update(conn_handle, &newParams);
-
     // Notify UI (or any other interested firmware components)
     meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::CONNECTED);
     bluetoothStatus->updateStatus(&newStatus);
@@ -129,7 +119,7 @@ void startAdv(void)
     Bluefruit.Advertising.addService(meshBleService);
     /* Start Advertising
      * - Enable auto advertising if disconnected
-     * - Interval:  fast mode = 20 ms, slow mode = 417,5 ms
+     * - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
      * - Timeout for fast mode is 30 seconds
      * - Start(timeout) with timeout = 0 will advertise forever (until connected)
      *
@@ -137,7 +127,7 @@ void startAdv(void)
      * https://developer.apple.com/library/content/qa/qa1931/_index.html
      */
     Bluefruit.Advertising.restartOnDisconnect(true);
-    Bluefruit.Advertising.setInterval(32, 668); // in unit of 0.625 ms
+    Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
     Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
     Bluefruit.Advertising.start(0); // 0 = Don't stop advertising after n seconds.  FIXME, we should stop advertising after X
 }
@@ -282,24 +272,6 @@ void NRF52Bluetooth::setup()
     // Set the connect/disconnect callback handlers
     Bluefruit.Periph.setConnectCallback(onConnect);
     Bluefruit.Periph.setDisconnectCallback(onDisconnect);
-
-    // Set slave latency to 5 to conserve power
-    // Despite name this does not impact data transfer
-    // https://docs.silabs.com/bluetooth/2.13/bluetooth-general-system-and-performance/optimizing-current-consumption-in-bluetooth-low-energy-devices
-    
-    Bluefruit.Periph.setConnSlaveLatency(5);
-
-    // TODO: Adafruit defaul min, max interval seems to be (20,30) [in 1.25 ms units] -> (25.00, 31.25) milliseconds
-    // so using formula Interval Max * (Slave Latency + 1) ≤ 2 seconds
-    // max slave latency we can use is 30 (max available in BLE)
-    // and even double max inteval (see apple doc linked above for formulas)
-    // See Periph.SetConnInterval method
-
-    // Tweak this later for even more power savings once those changes are confirmed to work well.
-    // Changing min, max interval may slow BLE transfer a bit - bumping slave latency will most likely not.
-
-
-
 #ifndef BLE_DFU_SECURE
     bledfu.setPermission(SECMODE_ENC_WITH_MITM, SECMODE_ENC_WITH_MITM);
     bledfu.begin(); // Install the DFU helper
@@ -328,7 +300,7 @@ void NRF52Bluetooth::setup()
 void NRF52Bluetooth::resumeAdvertising()
 {
     Bluefruit.Advertising.restartOnDisconnect(true);
-    Bluefruit.Advertising.setInterval(32, 668); // in unit of 0.625 ms
+    Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
     Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
     Bluefruit.Advertising.start(0);
 }
@@ -366,34 +338,11 @@ bool NRF52Bluetooth::onPairingPasskey(uint16_t conn_handle, uint8_t const passke
     meshtastic::BluetoothStatus newStatus(textkey);
     bluetoothStatus->updateStatus(&newStatus);
 
-#if HAS_SCREEN &&                                                                                                                \
-    !defined(MESHTASTIC_EXCLUDE_SCREEN) // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
+#if HAS_SCREEN && !defined(MESHTASTIC_EXCLUDE_SCREEN)
     if (screen) {
-        screen->startAlert([](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
-            char btPIN[16] = "888888";
-            snprintf(btPIN, sizeof(btPIN), "%06u", configuredPasskey);
-            int x_offset = display->width() / 2;
-            int y_offset = display->height() <= 80 ? 0 : 12;
-            display->setTextAlignment(TEXT_ALIGN_CENTER);
-            display->setFont(FONT_MEDIUM);
-            display->drawString(x_offset + x, y_offset + y, "Bluetooth");
-
-            display->setFont(FONT_SMALL);
-            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM - 4 : y_offset + FONT_HEIGHT_MEDIUM + 5;
-            display->drawString(x_offset + x, y_offset + y, "Enter this code");
-
-            display->setFont(FONT_LARGE);
-            String displayPin(btPIN);
-            String pin = displayPin.substring(0, 3) + " " + displayPin.substring(3, 6);
-            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_SMALL - 5 : y_offset + FONT_HEIGHT_SMALL + 5;
-            display->drawString(x_offset + x, y_offset + y, pin);
-
-            display->setFont(FONT_SMALL);
-            String deviceName = "Name: ";
-            deviceName.concat(getDeviceName());
-            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_LARGE - 6 : y_offset + FONT_HEIGHT_LARGE + 5;
-            display->drawString(x_offset + x, y_offset + y, deviceName);
-        });
+        std::string passkey = std::to_string(configuredPasskey);
+        std::string ble_message = "Bluetooth\nPIN\n" + passkey.substr(0, 3) + " " + passkey.substr(3, 6);
+        screen->showSimpleBanner(ble_message.c_str(), 30000);
     }
 #endif
     if (match_request) {

variants/esp32/esp32.ini

@@ -5,7 +5,7 @@ custom_esp32_kind = esp32
 custom_mtjson_part =
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.12.0
+  platformio/espressif32@6.11.0
 
 extra_scripts =
   ${env.extra_scripts}

variants/esp32s3/elecrow_panel/platformio.ini

@@ -128,6 +128,3 @@ build_flags =
   ${crowpanel_large_esp32s3_base.build_flags}
   -D VIEW_320x240
   -D DISPLAY_SIZE=800x480 ; landscape mode
-build_src_filter =
-  ${esp32s3_base.build_src_filter}
-  +<../variants/esp32s3/elecrow_panel>

variants/esp32s3/elecrow_panel/variant.cpp

@@ -1,21 +0,0 @@
-// meshtastic/firmware/variants/elecrow_panel/variant.cpp
-
-#include "variant.h"
-#include "Arduino.h"
-#include "Wire.h"
-
-bool elecrow_v2 = false; // false = v1, true = v2
-
-extern "C" {
-
-void initVariant()
-{
-    Wire.begin(I2C_SDA, I2C_SCL, 100000);
-    delay(50);
-    Wire.beginTransmission(0x30);
-    if (Wire.endTransmission() == 0) {
-        elecrow_v2 = true;
-    }
-    Wire.end();
-}
-}

variants/esp32s3/elecrow_panel/variant.h

@@ -1,8 +1,6 @@
 #define I2C_SDA 15
 #define I2C_SCL 16
 
-extern bool elecrow_v2; // false = v1, true = v2
-
 #if CROW_SELECT == 1
 #define WAKE_ON_TOUCH
 #define SCREEN_TOUCH_INT 47
@@ -19,7 +17,7 @@ extern bool elecrow_v2; // false = v1, true = v2
 #define DAC_I2S_DOUT 12
 #define DAC_I2S_MCLK 8 // don't use GPIO0 because it's assigned to LoRa or button
 #else
-#define PIN_BUZZER (elecrow_v2 ? 0 : 8)
+#define PIN_BUZZER 8
 #endif
 
 // GPS via UART1 connector
@@ -74,7 +72,7 @@ extern bool elecrow_v2; // false = v1, true = v2
 #define SENSOR_POWER_ON LOW
 #else
 // 4.3", 5.0", 7.0"
-#define LORA_CS (elecrow_v2 ? 8 : 0)
+#define LORA_CS 0
 #define LORA_SCK 5
 #define LORA_MISO 4
 #define LORA_MOSI 6

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -21,8 +21,8 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)
 
-//#define USE_LFXO // Board uses 32khz crystal for LF
-#define USE_LFRC    // Board uses RC for LF
+#define USE_LFXO // Board uses 32khz crystal for LF
+
 /*----------------------------------------------------------------------------
  *        Headers
  *----------------------------------------------------------------------------*/

variants/nrf52840/tracker-t1000-e/variant.h

@@ -22,9 +22,7 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)
 
-//#define USE_LFXO // Board uses 32khz crystal for LF
-
-#define USE_LFRC 
+#define USE_LFXO // Board uses 32khz crystal for LF
 
 /*----------------------------------------------------------------------------
  *        Headers