Upgrade trunk (#9547)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

.trunk/trunk.yaml

@@ -8,18 +8,18 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.497
-    - renovate@42.84.2
-    - prettier@3.8.0
-    - trufflehog@3.92.5
+    - checkov@3.2.500
+    - renovate@43.4.0
+    - prettier@3.8.1
+    - trufflehog@3.93.0
     - yamllint@1.38.0
     - bandit@1.9.3
-    - trivy@0.68.2
+    - trivy@0.69.1
     - taplo@0.10.0
-    - ruff@0.14.13
+    - ruff@0.15.0
     - isort@7.0.0
     - markdownlint@0.47.0
-    - oxipng@10.0.0
+    - oxipng@10.1.0
     - svgo@4.0.0
     - actionlint@1.7.10
     - flake8@7.3.0

bin/device-install.bat

@@ -156,16 +156,8 @@ IF %BPS_RESET% EQU 1 (
 SET "PROGNAME=!FILENAME:.factory.bin=!"
 CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
 
-IF "__!MCU!__" == "__esp32s3__" (
-    @REM We are working with ESP32-S3
-    SET "OTA_FILENAME=bleota-s3.bin"
-) ELSE IF "__!MCU!__" == "__esp32c3__" (
-    @REM We are working with ESP32-C3
-    SET "OTA_FILENAME=bleota-c3.bin"
-) ELSE (
-    @REM Everything else
-    SET "OTA_FILENAME=bleota.bin"
-)
+@REM Determine OTA filename based on MCU type (unified OTA format)
+SET "OTA_FILENAME=mt-!MCU!-ota.bin"
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.

bin/device-install.sh

@@ -131,14 +131,8 @@ if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
         exit 1
     fi
 
-    # Determine OTA filename based on MCU type
-    if [ "$MCU" == "esp32s3" ]; then
-        OTAFILE=bleota-s3.bin
-    elif [ "$MCU" == "esp32c3" ]; then
-        OTAFILE=bleota-c3.bin
-    else
-        OTAFILE=bleota.bin
-    fi
+    # Determine OTA filename based on MCU type (unified OTA format)
+    OTAFILE="mt-${MCU}-ota.bin"
 
     # Set SPIFFS filename with "littlefs-" prefix.
     SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"

platformio.ini

@@ -66,7 +66,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/b34c6817c25d6faabb3a8a162b5d14fb75395433.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/21e484f409cde18d44012caef84c244eb5ca28f3.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -144,7 +144,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.6
+	adafruit/Adafruit MPU6050@2.2.8
 	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
 	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0

src/gps/RTC.cpp

@@ -72,11 +72,13 @@ RTCSetResult readFromRTC()
 #elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
 #if defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
+        SensorPCF8563 rtc;
 #elif defined(PCF85063_RTC)
     if (rtc_found.address == PCF85063_RTC) {
+        SensorPCF85063 rtc;
+
 #endif
         uint32_t now = millis();
-        SensorRtcHelper rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
         rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
@@ -240,10 +242,12 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #elif defined(PCF8563_RTC) || defined(PCF85063_RTC)
 #if defined(PCF8563_RTC)
         if (rtc_found.address == PCF8563_RTC) {
+            SensorPCF8563 rtc;
 #elif defined(PCF85063_RTC)
         if (rtc_found.address == PCF85063_RTC) {
+            SensorPCF85063 rtc;
+
 #endif
-            SensorRtcHelper rtc;
 
 #if WIRE_INTERFACES_COUNT == 2
             rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);

src/graphics/draw/MenuHandler.cpp

@@ -1498,6 +1498,7 @@ void menuHandler::nodeNameLengthMenu()
 
                                                        config.display.use_long_node_name = option.value;
                                                        saveUIConfig();
+                                                       service->reloadConfig(SEGMENT_CONFIG);
                                                        LOG_INFO("Setting names to %s", option.value ? "long" : "short");
                                                    });
 

src/mesh/NodeDB.cpp

@@ -2213,8 +2213,8 @@ bool NodeDB::restorePreferences(meshtastic_AdminMessage_BackupLocation location,
     } else if (location == meshtastic_AdminMessage_BackupLocation_SD) {
         // TODO: After more mainline SD card support
     }
-    return success;
 #endif
+    return success;
 }
 
 /// Record an error that should be reported via analytics

src/mesh/udp/UdpMulticastHandler.h

@@ -22,10 +22,14 @@
 class UdpMulticastHandler final
 {
   public:
-    UdpMulticastHandler() { udpIpAddress = IPAddress(224, 0, 0, 69); }
+    UdpMulticastHandler() : isRunning(false) { udpIpAddress = IPAddress(224, 0, 0, 69); }
 
     void start()
     {
+        if (isRunning) {
+            LOG_DEBUG("UDP multicast already running");
+            return;
+        }
         if (udp.listenMulticast(udpIpAddress, UDP_MULTICAST_DEFAUL_PORT, 64)) {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
             LOG_DEBUG("UDP Listening on IP: %u.%u.%u.%u:%u", udpIpAddress[0], udpIpAddress[1], udpIpAddress[2], udpIpAddress[3],
@@ -34,13 +38,29 @@ class UdpMulticastHandler final
             LOG_DEBUG("UDP Listening on IP: %s", WiFi.localIP().toString().c_str());
 #endif
             udp.onPacket([this](AsyncUDPPacket packet) { onReceive(packet); });
+            isRunning = true;
         } else {
             LOG_DEBUG("Failed to listen on UDP");
         }
     }
 
+    void stop()
+    {
+        if (!isRunning) {
+            return;
+        }
+        LOG_DEBUG("Stopping UDP multicast");
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52)
+        udp.close();
+#endif
+        isRunning = false;
+    }
+
     void onReceive(AsyncUDPPacket packet)
     {
+        if (!isRunning) {
+            return;
+        }
         size_t packetLength = packet.length();
 #if defined(ARCH_NRF52)
         IPAddress ip = packet.remoteIP();
@@ -67,7 +87,7 @@ class UdpMulticastHandler final
 
     bool onSend(const meshtastic_MeshPacket *mp)
     {
-        if (!mp || !udp) {
+        if (!isRunning || !mp || !udp) {
             return false;
         }
 #if defined(ARCH_NRF52)
@@ -92,5 +112,6 @@ class UdpMulticastHandler final
   private:
     IPAddress udpIpAddress;
     AsyncUDP udp;
+    bool isRunning;
 };
 #endif // HAS_UDP_MULTICAST

src/mesh/wifi/WiFiAPClient.cpp

@@ -391,6 +391,11 @@ static void WiFiEvent(WiFiEvent_t event)
         LOG_INFO("Disconnected from WiFi access point");
 #ifdef WIFI_LED
         digitalWrite(WIFI_LED, LOW);
+#endif
+#if HAS_UDP_MULTICAST
+        if (udpHandler) {
+            udpHandler->stop();
+        }
 #endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
@@ -417,6 +422,11 @@ static void WiFiEvent(WiFiEvent_t event)
         break;
     case ARDUINO_EVENT_WIFI_STA_LOST_IP:
         LOG_INFO("Lost IP address and IP address is reset to 0");
+#if HAS_UDP_MULTICAST
+        if (udpHandler) {
+            udpHandler->stop();
+        }
+#endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
             syslog.disable();

src/platform/esp32/main-esp32.cpp

@@ -24,6 +24,11 @@
 #include <nvs.h>
 #include <nvs_flash.h>
 
+// Weak empty variant shutdown prep function.
+// May be redefined by variant files.
+void variant_shutdown() __attribute__((weak));
+void variant_shutdown() {}
+
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_BLUETOOTH
 void setBluetoothEnable(bool enable)
 {
@@ -249,6 +254,7 @@ void cpuDeepSleep(uint32_t msecToWake)
 
 #endif // #end ESP32S3_WAKE_TYPE
 #endif
+    variant_shutdown();
 
     // We want RTC peripherals to stay on
     esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON);

src/platform/nrf52/AsyncUDP.cpp

@@ -36,6 +36,13 @@ bool AsyncUDP::writeTo(const uint8_t *data, size_t len, IPAddress ip, uint16_t p
     return udp.endPacket();
 }
 
+void AsyncUDP::close()
+{
+    udp.stop();
+    localPort = 0;
+    _onPacket = nullptr;
+}
+
 // AsyncUDPPacket
 AsyncUDPPacket::AsyncUDPPacket(EthernetUDP &source) : _udp(source), _remoteIP(source.remoteIP()), _remotePort(source.remotePort())
 {

src/platform/nrf52/AsyncUDP.h

@@ -22,6 +22,7 @@ class AsyncUDP : public Print, private concurrency::OSThread
 
     bool listenMulticast(IPAddress multicastIP, uint16_t port, uint8_t ttl = 64);
     bool writeTo(const uint8_t *data, size_t len, IPAddress ip, uint16_t port);
+    void close();
 
     size_t write(uint8_t b) override;
     size_t write(const uint8_t *data, size_t len) override;

src/platform/nrf52/main-nrf52.cpp

@@ -46,7 +46,7 @@
 
 uint16_t getVDDVoltage();
 
-// Weak empty variant initialization function.
+// Weak empty variant shutdown prep function.
 // May be redefined by variant files.
 void variant_shutdown() __attribute__((weak));
 void variant_shutdown() {}

variants/esp32/betafpv_2400_tx_micro/platformio.ini

@@ -16,4 +16,4 @@ upload_speed = 460800
 lib_deps =
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3

variants/esp32c3/heltec_hru_3601/platformio.ini

@@ -7,4 +7,4 @@ build_flags =
   -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -24,7 +24,7 @@ build_unflags =
 lib_deps =
   ${esp32c6_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@2.3.7
 build_flags = 

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -34,3 +34,5 @@ lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
   # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
   maxpromer/PCA9557-arduino@1.0.0
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.4

variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp

@@ -1,12 +1,17 @@
 #include "variant.h"
 #include <PCA9557.h>
 
-PCA9557 io(0x18, &Wire);
+PCA9557 io(0x18, &Wire1);
 
 void earlyInitVariant()
 {
-    Wire.begin(48, 47);
+    Wire1.begin(48, 47);
     io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
     io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
     io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
 }
+
+void variant_shutdown()
+{
+    io.digitalWrite(PCA_PIN_POWER_EN, LOW);
+}

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -30,6 +30,9 @@
 #define I2C_SCL 1
 #define I2C_SDA 2
 
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
 // GPS pins
 #define GPS_SWITH 10
 #define HAS_GPS 1

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -13,7 +13,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
   zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -25,4 +25,4 @@ lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
   zinggjm/GxEPD2@1.6.6
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3

variants/esp32s3/heltec_sensor_hub/platformio.ini

@@ -11,4 +11,4 @@ build_flags =
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3

variants/esp32s3/unphone/platformio.ini

@@ -41,7 +41,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   # TODO renovate
   https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
-  adafruit/Adafruit NeoPixel@1.15.2
+  adafruit/Adafruit NeoPixel@1.15.3
 
 [env:unphone-tft]
 board_level = extra

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -24,5 +24,5 @@ lib_deps =
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
   khoih-prog/nRF52_PWM@1.0.1
-  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M3/variant.h

@@ -116,7 +116,6 @@ extern "C" {
 
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
-#define HAS_RTC 1
 
 #ifdef __cplusplus
 }

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -21,5 +21,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
 lib_deps =
   ${nrf52840_base.lib_deps}
-  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4

variants/nrf52840/ELECROW-ThinkNode-M6/variant.h

@@ -121,7 +121,6 @@ static const uint8_t A0 = PIN_A0;
 
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
-#define HAS_RTC 1
 
 // SPI
 #define SPI_INTERFACES_COUNT 1

variants/nrf52840/t-echo-plus/variant.h

@@ -132,9 +132,6 @@ static const uint8_t A0 = PIN_A0;
 
 #define HAS_DRV2605 1
 
-// Battery / ADC already defined above
-#define HAS_RTC 1
-
 #define SERIAL_PRINT_PORT 0
 
 #ifdef __cplusplus