Add t-echo plus support

* Calculate hops correctly even when hop_start==0.

* Use the same type (int8_t) in the loop, avoiding signed/unsigned mismatches.

* Clarify defaultIfUnknown is returned for encrypted packets.

.github/workflows/build_firmware.yml

@@ -56,16 +56,18 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
+      - name: Job summary
         env:
           PIO_ENV: ${{ inputs.pio_env }}
         run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
+          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
+          echo '' >> $GITHUB_STEP_SUMMARY
           echo '```json' >> $GITHUB_STEP_SUMMARY
           cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
           echo '' >> $GITHUB_STEP_SUMMARY
           echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "</details>" >> $GITHUB_STEP_SUMMARY
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v6

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
-    - renovate@42.48.0
+    - checkov@3.2.496
+    - renovate@42.66.14
     - prettier@3.7.4
-    - trufflehog@3.92.3
+    - trufflehog@3.92.4
     - yamllint@1.37.1
     - bandit@1.9.2
-    - trivy@0.68.1
+    - trivy@0.68.2
     - taplo@0.10.0
-    - ruff@0.14.9
+    - ruff@0.14.10
     - isort@7.0.0
     - markdownlint@0.47.0
     - oxipng@10.0.0

bin/build-nrf52.sh

@@ -21,13 +21,14 @@ rm -f $BUILDDIR/firmware*
 export APP_VERSION=$VERSION
 
 basename=firmware-$1-$VERSION
+ota_basename=${basename}-ota
 
 pio run --environment $1 -t mtjson # -v
 
 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
 
 echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
+cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip
 
 echo "Copying NRF52 UF2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2

bin/platformio-custom.py

@@ -17,6 +17,8 @@ lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
 
 def manifest_gather(source, target, env):
     out = []
+    board_platform = env.BoardConfig().get("platform")
+    needs_ota_suffix = board_platform == "nordicnrf52"
     check_paths = [
         progname,
         f"{progname}.elf",
@@ -32,8 +34,11 @@ def manifest_gather(source, target, env):
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
         if f.exists():
+            manifest_name = p
+            if needs_ota_suffix and p == f"{progname}.zip":
+                manifest_name = f"{progname}-ota.zip"
             d = {
-                "name": p,
+                "name": manifest_name,
                 "md5": f.get_content_hash(), # Returns MD5 hash
                 "bytes": f.get_size() # Returns file size in bytes
             }

platformio.ini

@@ -64,7 +64,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/b34c6817c25d6faabb3a8a162b5d14fb75395433.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -123,7 +123,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/2746a1ce3804998460a2cb319b8ea8a238dfd8c9.zip
+	https://github.com/meshtastic/device-ui/archive/7656d49ea2bdb81a43afc1e8552f1cc86b8dce3c.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/DisplayFormatters.cpp

@@ -31,6 +31,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
         return useShortName ? "LongF" : "LongFast";
         break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        return useShortName ? "LongT" : "LongTurbo";
+        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;

src/graphics/EInkDisplay2.cpp

@@ -148,7 +148,7 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE) || defined(TTGO_T_ECHO_PLUS)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 

src/graphics/draw/MenuHandler.cpp

@@ -20,12 +20,41 @@
 #include "modules/KeyVerificationModule.h"
 
 #include "modules/TraceRouteModule.h"
+#include <algorithm>
+#include <array>
 #include <functional>
+#include <utility>
 
 extern uint16_t TFT_MESH;
 
 namespace graphics
 {
+
+namespace
+{
+
+// Caller must ensure the provided options array outlives the banner callback.
+template <typename T, size_t N, typename Callback>
+BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOption<T> (&options)[N],
+                                               std::array<const char *, N> &labels, Callback &&onSelection)
+{
+    for (size_t i = 0; i < N; ++i) {
+        labels[i] = options[i].label;
+    }
+
+    const MenuOption<T> *optionsPtr = options;
+    auto callback = std::function<void(const MenuOption<T> &, int)>(std::forward<Callback>(onSelection));
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = message;
+    bannerOptions.optionsArrayPtr = labels.data();
+    bannerOptions.optionsCount = static_cast<uint8_t>(N);
+    bannerOptions.bannerCallback = [optionsPtr, callback](int selected) -> void { callback(optionsPtr[selected], selected); };
+    return bannerOptions;
+}
+
+} // namespace
+
 menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
@@ -197,48 +226,38 @@ void menuHandler::DeviceRolePicker()
 
 void menuHandler::RadioPresetPicker()
 {
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
-    enum optionsNumbers {
-        Back = 0,
-        radiopreset_LongSlow = 1,
-        radiopreset_LongModerate = 2,
-        radiopreset_LongFast = 3,
-        radiopreset_MediumSlow = 4,
-        radiopreset_MediumFast = 5,
-        radiopreset_ShortSlow = 6,
-        radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8
-    };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Radio Preset";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 9;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuHandler::menuQueue = menuHandler::lora_Menu;
-            screen->runNow();
-            return;
-        } else if (selected == radiopreset_LongSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-        } else if (selected == radiopreset_LongModerate) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE;
-        } else if (selected == radiopreset_LongFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        } else if (selected == radiopreset_MediumSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW;
-        } else if (selected == radiopreset_MediumFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-        } else if (selected == radiopreset_ShortSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW;
-        } else if (selected == radiopreset_ShortFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
-        } else if (selected == radiopreset_ShortTurbo) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-        }
-        service->reloadConfig(SEGMENT_CONFIG);
-        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+    static const RadioPresetOption presetOptions[] = {
+        {"Back", OptionsAction::Back},
+        {"LongTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO},
+        {"LongModerate", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE},
+        {"LongFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST},
+        {"MediumSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW},
+        {"MediumFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST},
+        {"ShortSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW},
+        {"ShortFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST},
+        {"ShortTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO},
     };
+
+    constexpr size_t presetCount = sizeof(presetOptions) / sizeof(presetOptions[0]);
+    static std::array<const char *, presetCount> presetLabels{};
+
+    auto bannerOptions =
+        createStaticBannerOptions("Radio Preset", presetOptions, presetLabels, [](const RadioPresetOption &option, int) -> void {
+            if (option.action == OptionsAction::Back) {
+                menuHandler::menuQueue = menuHandler::lora_Menu;
+                screen->runNow();
+                return;
+            }
+
+            if (!option.hasValue) {
+                return;
+            }
+
+            config.lora.modem_preset = option.value;
+            service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        });
+
     screen->showOverlayBanner(bannerOptions);
 }
 

src/graphics/draw/MenuHandler.h

@@ -99,5 +99,24 @@ class menuHandler
     static void BluetoothToggleMenu();
 };
 
+/* Generic Menu Options designations  */
+enum class OptionsAction { Back, Select };
+
+template <typename T> struct MenuOption {
+    const char *label;
+    OptionsAction action;
+    bool hasValue;
+    T value;
+
+    MenuOption(const char *labelIn, OptionsAction actionIn, T valueIn)
+        : label(labelIn), action(actionIn), hasValue(true), value(valueIn)
+    {
+    }
+
+    MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
+};
+
+using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
+
 } // namespace graphics
 #endif

src/graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.cpp

@@ -1,6 +1,7 @@
 #ifdef MESHTASTIC_INCLUDE_INKHUD
 
 #include "./PositionsApplet.h"
+#include "NodeDB.h"
 
 using namespace NicheGraphics;
 
@@ -49,8 +50,8 @@ ProcessMessage InkHUD::PositionsApplet::handleReceived(const meshtastic_MeshPack
     if (!hasPosition)
         return ProcessMessage::CONTINUE;
 
-    bool hasHopsAway = (mp.hop_start != 0 && mp.hop_limit <= mp.hop_start); // From NodeDB::updateFrom
-    uint8_t hopsAway = mp.hop_start - mp.hop_limit;
+    const int8_t hopsAway = getHopsAway(mp);
+    const bool hasHopsAway = hopsAway >= 0;
 
     // Determine if the position packet would change anything on-screen
     // -----------------------------------------------------------------

src/input/RotaryEncoderInterruptImpl1.cpp

@@ -27,7 +27,9 @@ bool RotaryEncoderInterruptImpl1::init()
                                      RotaryEncoderInterruptImpl1::handleIntA, RotaryEncoderInterruptImpl1::handleIntB,
                                      RotaryEncoderInterruptImpl1::handleIntPressed);
     inputBroker->registerSource(this);
+#ifndef HAS_PHYSICAL_KEYBOARD
     osk_found = true;
+#endif
     return true;
 }
 

src/input/TrackballInterruptBase.cpp

@@ -45,7 +45,9 @@ void TrackballInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLef
 
     LOG_DEBUG("Trackball GPIO initialized - UP:%d DOWN:%d LEFT:%d RIGHT:%d PRESS:%d", this->_pinUp, this->_pinDown,
               this->_pinLeft, this->_pinRight, pinPress);
+#ifndef HAS_PHYSICAL_KEYBOARD
     osk_found = true;
+#endif
     this->setInterval(100);
 }
 

src/input/UpDownInterruptImpl1.cpp

@@ -29,7 +29,9 @@ bool UpDownInterruptImpl1::init()
                               eventDownLong, UpDownInterruptImpl1::handleIntDown, UpDownInterruptImpl1::handleIntUp,
                               UpDownInterruptImpl1::handleIntPressed);
     inputBroker->registerSource(this);
+#ifndef HAS_PHYSICAL_KEYBOARD
     osk_found = true;
+#endif
     return true;
 }
 

src/main.cpp

@@ -205,7 +205,7 @@ ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE,
 /// The I2C address of our Air Quality Indicator (if found)
 ScanI2C::DeviceAddress aqi_found = ScanI2C::ADDRESS_NONE;
 
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
 Adafruit_DRV2605 drv;
 #endif
 
@@ -440,9 +440,11 @@ void setup()
     LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n");
 
 #if defined(ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
+#ifndef SENSECAP_INDICATOR
     // use PSRAM for malloc calls > 256 bytes
     heap_caps_malloc_extmem_enable(256);
 #endif
+#endif
 
 #if defined(DEBUG_MUTE) && defined(DEBUG_PORT)
     DEBUG_PORT.printf("\r\n\r\n//\\ E S H T /\\ S T / C\r\n");
@@ -786,7 +788,6 @@ void setup()
     // We do this as early as possible because this loads preferences from flash
     // but we need to do this after main cpu init (esp32setup), because we need the random seed set
     nodeDB = new NodeDB;
-
 #if HAS_TFT
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         tftSetup();
@@ -832,7 +833,12 @@ void setup()
 #endif
 #endif
 
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
+#if defined(PIN_DRV_EN)
+    pinMode(PIN_DRV_EN, OUTPUT);
+    digitalWrite(PIN_DRV_EN, HIGH);
+    delay(10);
+#endif
     drv.begin();
     drv.selectLibrary(1);
     // I2C trigger by sending 'go' command
@@ -868,7 +874,7 @@ void setup()
     SPI.begin();
 #endif
 #else
-        // ESP32
+// ESP32
 #if defined(HW_SPI1_DEVICE)
     SPI1.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     LOG_DEBUG("SPI1.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
@@ -1456,8 +1462,10 @@ void setup()
 #endif
 
 #if defined(HAS_TRACKBALL) || (defined(INPUTDRIVER_ENCODER_TYPE) && INPUTDRIVER_ENCODER_TYPE == 2)
+#ifndef HAS_PHYSICAL_KEYBOARD
     osk_found = true;
 #endif
+#endif
 
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WEBSERVER
     // Start web server thread.

src/main.h

@@ -42,7 +42,7 @@ extern bool eink_found;
 extern bool pmu_found;
 extern bool isUSBPowered;
 
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
 #include <Adafruit_DRV2605.h>
 extern Adafruit_DRV2605 drv;
 #endif

src/mesh/FloodingRouter.cpp

@@ -124,6 +124,10 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) {
         iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
     }
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE && iface && nodeDB &&
+        nodeDB->isFromOrToFavoritedNode(*p)) {
+        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
+    }
 }
 
 bool FloodingRouter::isRebroadcaster()

src/mesh/MeshModule.cpp

@@ -195,7 +195,7 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
             // but opted NOT TO.  Because it is not a good idea to let remote nodes 'probe' to find out which PSKs were "good" vs
             // bad.
             routingModule->sendAckNak(meshtastic_Routing_Error_NO_RESPONSE, getFrom(&mp), mp.id, mp.channel,
-                                      routingModule->getHopLimitForResponse(mp.hop_start, mp.hop_limit));
+                                      routingModule->getHopLimitForResponse(mp));
         }
     }
 
@@ -235,7 +235,7 @@ void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to)
     assert(p->which_payload_variant == meshtastic_MeshPacket_decoded_tag); // Should already be set by now
     p->to = getFrom(&to);    // Make sure that if we are sending to the local node, we use our local node addr, not 0
     p->channel = to.channel; // Use the same channel that the request came in on
-    p->hop_limit = routingModule->getHopLimitForResponse(to.hop_start, to.hop_limit);
+    p->hop_limit = routingModule->getHopLimitForResponse(to);
 
     // No need for an ack if we are just delivering locally (it just generates an ignored ack)
     p->want_ack = (to.from != 0) ? to.want_ack : false;

src/mesh/MeshService.cpp

@@ -93,11 +93,8 @@ int MeshService::handleFromRadio(const meshtastic_MeshPacket *mp)
     } else if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag && !nodeDB->getMeshNode(mp->from)->has_user &&
                nodeInfoModule && !isPreferredRebroadcaster && !nodeDB->isFull()) {
         if (airTime->isTxAllowedChannelUtil(true)) {
-            // Hops used by the request. If somebody in between running modified firmware modified it, ignore it
-            auto hopStart = mp->hop_start;
-            auto hopLimit = mp->hop_limit;
-            uint8_t hopsUsed = hopStart < hopLimit ? config.lora.hop_limit : hopStart - hopLimit;
-            if (hopsUsed > config.lora.hop_limit + 2) {
+            const int8_t hopsUsed = getHopsAway(*mp, config.lora.hop_limit);
+            if (hopsUsed > (int32_t)(config.lora.hop_limit + 2)) {
                 LOG_DEBUG("Skip send NodeInfo: %d hops away is too far away", hopsUsed);
             } else {
                 LOG_INFO("Heard new node on ch. %d, send NodeInfo and ask for response", mp->channel);
@@ -276,6 +273,10 @@ bool MeshService::trySendPosition(NodeNum dest, bool wantReplies)
     if (nodeDB->hasValidPosition(node)) {
 #if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
         if (positionModule) {
+            if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+                LOG_DEBUG("Skip position ping; no fresh position since boot");
+                return false;
+            }
             LOG_INFO("Send position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel);
             positionModule->sendOurPosition(dest, wantReplies, node->channel);
             return true;

src/mesh/NextHopRouter.cpp

@@ -64,7 +64,7 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
                 perhapsRebroadcast(p);
             }
         } else {
-            bool isRepeated = p->hop_start > 0 && p->hop_start == p->hop_limit;
+            bool isRepeated = getHopsAway(*p) == 0;
             // If repeated and not in Tx queue anymore, try relaying again, or if we are the destination, send the ACK again
             if (isRepeated) {
                 if (!findInTxQueue(p->from, p->id)) {
@@ -101,8 +101,7 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
                 bool wasAlreadyRelayer = wasRelayer(p->relay_node, p->decoded.request_id, p->to);
                 bool weWereSoleRelayer = false;
                 bool weWereRelayer = wasRelayer(ourRelayID, p->decoded.request_id, p->to, &weWereSoleRelayer);
-                if ((weWereRelayer && wasAlreadyRelayer) ||
-                    (p->hop_start != 0 && p->hop_start == p->hop_limit && weWereSoleRelayer)) {
+                if ((weWereRelayer && wasAlreadyRelayer) || (getHopsAway(*p) == 0 && weWereSoleRelayer)) {
                     if (origTx->next_hop != p->relay_node) { // Not already set
                         LOG_INFO("Update next hop of 0x%x to 0x%x based on ACK/reply (was relayer %d we were sole %d)", p->from,
                                  p->relay_node, wasAlreadyRelayer, weWereSoleRelayer);

src/mesh/NodeDB.cpp

@@ -805,11 +805,12 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.output_ms = 500;
     moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
-    // Default to RAK led pin 2 (blue)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3) ||          \
+    defined(ELECROW_ThinkNode_M6)
+    // Default to PIN_LED2 for external notification output (LED color depends on device variant)
     moduleConfig.external_notification.enabled = true;
     moduleConfig.external_notification.output = PIN_LED2;
-#if defined(MUZI_BASE)
+#if defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
     moduleConfig.external_notification.active = false;
 #else
     moduleConfig.external_notification.active = true;
@@ -1043,6 +1044,7 @@ void NodeDB::clearLocalPosition()
     node->position.altitude = 0;
     node->position.time = 0;
     setLocalPosition(meshtastic_Position_init_default);
+    localPositionUpdatedSinceBoot = false;
 }
 
 void NodeDB::cleanupMeshDB()
@@ -1547,6 +1549,23 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p)
     return delta;
 }
 
+int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown)
+{
+    // Firmware prior to 2.3.0 (585805c) lacked a hop_start field. Firmware version 2.5.0 (bf34329) introduced a
+    // bitfield that is always present. Use the presence of the bitfield to determine if the origin's firmware
+    // version is guaranteed to have hop_start populated. Note that this can only be done for decoded packets as
+    // the bitfield is encrypted under the channel encryption key. For encrypted packets, this returns
+    // defaultIfUnknown when hop_start is 0.
+    if (p.hop_start == 0 && !(p.which_payload_variant == meshtastic_MeshPacket_decoded_tag && p.decoded.has_bitfield))
+        return defaultIfUnknown; // Cannot reliably determine the number of hops.
+
+    // Guard against invalid values.
+    if (p.hop_start < p.hop_limit)
+        return defaultIfUnknown;
+
+    return p.hop_start - p.hop_limit;
+}
+
 #define NUM_ONLINE_SECS (60 * 60 * 2) // 2 hrs to consider someone offline
 
 size_t NodeDB::getNumOnlineMeshNodes(bool localOnly)
@@ -1799,9 +1818,10 @@ void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
         info->via_mqtt = mp.via_mqtt; // Store if we received this packet via MQTT
 
         // If hopStart was set and there wasn't someone messing with the limit in the middle, add hopsAway
-        if (mp.hop_start != 0 && mp.hop_limit <= mp.hop_start) {
+        const int8_t hopsAway = getHopsAway(mp);
+        if (hopsAway >= 0) {
             info->has_hops_away = true;
-            info->hops_away = mp.hop_start - mp.hop_limit;
+            info->hops_away = hopsAway;
         }
         sortMeshDB();
     }

src/mesh/NodeDB.h

@@ -110,6 +110,10 @@ uint32_t sinceLastSeen(const meshtastic_NodeInfoLite *n);
 /// Given a packet, return how many seconds in the past (vs now) it was received
 uint32_t sinceReceived(const meshtastic_MeshPacket *p);
 
+/// Given a packet, return the number of hops used to reach this node.
+/// Returns defaultIfUnknown if the number of hops couldn't be determined.
+int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown = -1);
+
 enum LoadFileResult {
     // Successfully opened the file
     LOAD_SUCCESS = 1,
@@ -279,9 +283,13 @@ class NodeDB
         LOG_DEBUG("Set local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i,
                   position.time, position.timestamp);
         localPosition = position;
+        if (position.latitude_i != 0 || position.longitude_i != 0) {
+            localPositionUpdatedSinceBoot = true;
+        }
     }
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
+    bool hasLocalPositionSinceBoot() const { return localPositionUpdatedSinceBoot; }
 
 #if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
@@ -301,6 +309,7 @@ class NodeDB
 
   private:
     bool duplicateWarned = false;
+    bool localPositionUpdatedSinceBoot = false;
     uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash
     uint32_t lastBackupAttempt = 0; // when we last tried a backup automatically or manually
     uint32_t lastSort = 0;          // When last sorted the nodeDB

src/mesh/RadioInterface.cpp

@@ -296,11 +296,6 @@ bool RadioInterface::shouldRebroadcastEarlyLikeRouter(meshtastic_MeshPacket *p)
         return true;
     }
 
-    // If we are a CLIENT_BASE and the packet is from or to a favorited node, we should rebroadcast early
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
-        return nodeDB->isFromOrToFavoritedNode(*p);
-    }
-
     return false;
 }
 
@@ -503,6 +498,11 @@ void RadioInterface::applyModemConfig()
                 cr = 5;
                 sf = 10;
                 break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
             default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
                 bw = (myRegion->wideLora) ? 812.5 : 250;
                 cr = 5;
@@ -539,13 +539,26 @@ void RadioInterface::applyModemConfig()
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
-            static const char *err_string = "Regional frequency range is smaller than bandwidth. Fall back to default preset";
-            LOG_ERROR(err_string);
+            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
+            const float requestedBwKHz = bw;
+            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
+            const char *presetName =
+                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
+
+            char err_string[160];
+            if (isWideRequest) {
+                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
+                         myRegion->name, presetName);
+            } else {
+                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
+                         myRegion->name, regionSpanKHz, requestedBwKHz);
+            }
+            LOG_ERROR("%s", err_string);
             RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
             meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
             cn->level = meshtastic_LogRecord_Level_ERROR;
-            sprintf(cn->message, err_string);
+            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
             service->sendClientNotification(cn);
 
             // Set to default modem preset

src/mesh/ReliableRouter.cpp

@@ -1,6 +1,7 @@
 #include "ReliableRouter.h"
 #include "Default.h"
 #include "MeshTypes.h"
+#include "NodeDB.h"
 #include "configuration.h"
 #include "memGet.h"
 #include "mesh-pb-constants.h"
@@ -108,12 +109,12 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
                         // If this packet should always be ACKed reliably with want_ack back to the original sender, make sure we
                         // do that unconditionally.
                         sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel,
-                                   routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit), true);
+                                   routingModule->getHopLimitForResponse(*p), true);
                     } else if (!p->decoded.request_id && !p->decoded.reply_id) {
                         // If it's not an ACK or a reply, send an ACK.
                         sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel,
-                                   routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit));
-                    } else if ((p->hop_start > 0 && p->hop_start == p->hop_limit) || p->next_hop != NO_NEXT_HOP_PREFERENCE) {
+                                   routingModule->getHopLimitForResponse(*p));
+                    } else if ((getHopsAway(*p) == 0) || p->next_hop != NO_NEXT_HOP_PREFERENCE) {
                         // If we received the packet directly from the original sender, send a 0-hop ACK since the original sender
                         // won't overhear any implicit ACKs. If we received the packet via NextHopRouter, also send a 0-hop ACK to
                         // stop the immediate relayer's retransmissions.
@@ -123,11 +124,11 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas
                            (nodeDB->getMeshNode(p->from) == nullptr || nodeDB->getMeshNode(p->from)->user.public_key.size == 0)) {
                     LOG_INFO("PKI packet from unknown node, send PKI_UNKNOWN_PUBKEY");
                     sendAckNak(meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY, getFrom(p), p->id, channels.getPrimaryIndex(),
-                               routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit));
+                               routingModule->getHopLimitForResponse(*p));
                 } else {
                     // Send a 'NO_CHANNEL' error on the primary channel if want_ack packet destined for us cannot be decoded
                     sendAckNak(meshtastic_Routing_Error_NO_CHANNEL, getFrom(p), p->id, channels.getPrimaryIndex(),
-                               routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit));
+                               routingModule->getHopLimitForResponse(*p));
                 }
             } else if (p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum()) && p->hop_limit > 0) {
                 // No wantAck, but we need to ACK with hop limit of 0 if we were the next hop to stop their retransmissions

src/mesh/Router.cpp

@@ -81,8 +81,7 @@ Router::Router() : concurrency::OSThread("Router"), fromRadioQueue(MAX_RX_FROMRA
 bool Router::shouldDecrementHopLimit(const meshtastic_MeshPacket *p)
 {
     // First hop MUST always decrement to prevent retry issues
-    bool isFirstHop = (p->hop_start != 0 && p->hop_start == p->hop_limit);
-    if (isFirstHop) {
+    if (getHopsAway(*p) == 0) {
         return true; // Always decrement on first hop
     }
 

src/mesh/generated/meshtastic/config.pb.h

@@ -293,7 +293,8 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
 typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
     /* Long Range - Fast */
     meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
-    /* Long Range - Slow */
+    /* Long Range - Slow
+ Deprecated in 2.7: Unpopular slow preset. */
     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
     /* Very Long Range - Slow
  Deprecated in 2.5: Works only with txco and is unusably slow */
@@ -311,7 +312,10 @@ typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
     /* Short Range - Turbo
  This is the fastest preset and the only one with 500kHz bandwidth.
  It is not legal to use in all regions due to this wider bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8
+    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8,
+    /* Long Range - Turbo
+ This preset performs similarly to LongFast, but with 500Khz bandwidth. */
+    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9
 } meshtastic_Config_LoRaConfig_ModemPreset;
 
 typedef enum _meshtastic_Config_BluetoothConfig_PairingMode {
@@ -689,8 +693,8 @@ extern "C" {
 #define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_BR_902+1))
 
 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
-#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO
-#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO+1))
+#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO
+#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO+1))
 
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MIN meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MAX meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN

src/modules/AdminModule.cpp

@@ -417,6 +417,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     }
     case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
         LOG_INFO("Client requesting to enter DFU mode");
+#if HAS_SCREEN
+        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
+#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
         enterDfuMode();
 #endif

src/modules/ExternalNotificationModule.cpp

@@ -168,7 +168,7 @@ int32_t ExternalNotificationModule::runOnce()
             delay = EXT_NOTIFICATION_FAST_THREAD_MS;
 #endif
 
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
             drv.go();
 #endif
         }
@@ -283,7 +283,7 @@ void ExternalNotificationModule::setExternalState(uint8_t index, bool on)
 #ifdef UNPHONE
     unphone.rgb(red, green, blue);
 #endif
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
     if (on) {
         drv.go();
     } else {
@@ -319,7 +319,7 @@ void ExternalNotificationModule::stopNow()
         externalTurnedOn[i] = 0;
     }
     setIntervalFromNow(0);
-#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
+#ifdef HAS_DRV2605
     drv.stop();
 #endif
 

src/modules/NeighborInfoModule.cpp

@@ -170,7 +170,7 @@ bool NeighborInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp,
         } else {
             LOG_DEBUG("  Ignoring dummy neighbor info packet (single neighbor with nodeId 0, snr 0)");
         }
-    } else if (mp.hop_start != 0 && mp.hop_start == mp.hop_limit) {
+    } else if (getHopsAway(mp) == 0) {
         LOG_DEBUG("Get or create neighbor: %u with snr %f", mp.from, mp.rx_snr);
         // If the hopLimit is the same as hopStart, then it is a neighbor
         getOrCreateNeighbor(mp.from, mp.from, 0,

src/modules/NodeInfoModule.cpp

@@ -7,17 +7,41 @@
 #include "configuration.h"
 #include "main.h"
 #include <Throttle.h>
+#include <algorithm>
+
+#ifndef USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS
+#define USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS (12 * 60 * 60)
+#endif
 
 NodeInfoModule *nodeInfoModule;
 
+static constexpr uint32_t NodeInfoReplySuppressSeconds = USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS;
+
 bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_User *pptr)
 {
+    suppressReplyForCurrentRequest = false;
+
     if (mp.from == nodeDB->getNodeNum()) {
         LOG_WARN("Ignoring packet supposed to be from our own node: %08x", mp.from);
         return false;
     }
 
     auto p = *pptr;
+
+    if (mp.decoded.want_response) {
+        const NodeNum sender = getFrom(&mp);
+        const uint32_t now = mp.rx_time ? mp.rx_time : getTime();
+        auto it = lastNodeInfoSeen.find(sender);
+        if (it != lastNodeInfoSeen.end()) {
+            uint32_t sinceLast = now >= it->second ? now - it->second : 0;
+            if (sinceLast < NodeInfoReplySuppressSeconds) {
+                suppressReplyForCurrentRequest = true;
+            }
+        }
+        lastNodeInfoSeen[sender] = now;
+        pruneLastNodeInfoCache();
+    }
+
     if (p.is_licensed != owner.is_licensed) {
         LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
         return true;
@@ -42,6 +66,8 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
         service->sendToPhone(packetCopy);
     }
 
+    pruneLastNodeInfoCache();
+
     // LOG_DEBUG("did handleReceived");
     return false; // Let others look at this message also if they want
 }
@@ -68,9 +94,11 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
 
     if (p) { // Check whether we didn't ignore it
         p->to = dest;
-        p->decoded.want_response = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
+        bool requestWantResponse = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
                                     config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
                                    wantReplies;
+
+        p->decoded.want_response = requestWantResponse;
         if (_shorterTimeout)
             p->priority = meshtastic_MeshPacket_Priority_DEFAULT;
         else
@@ -89,6 +117,13 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
 
 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
+    if (suppressReplyForCurrentRequest) {
+        LOG_DEBUG("Skip send NodeInfo since we heard the requester <12h ago");
+        ignoreRequest = true;
+        suppressReplyForCurrentRequest = false;
+        return NULL;
+    }
+
     if (!airTime->isTxAllowedChannelUtil(false)) {
         ignoreRequest = true; // Mark it as ignored for MeshModule
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
@@ -125,6 +160,29 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
     }
 }
 
+void NodeInfoModule::pruneLastNodeInfoCache()
+{
+    if (!nodeDB || !nodeDB->meshNodes)
+        return;
+
+    const size_t maxEntries = nodeDB->meshNodes->size();
+
+    for (auto it = lastNodeInfoSeen.begin(); it != lastNodeInfoSeen.end();) {
+        if (!nodeDB->getMeshNode(it->first)) {
+            it = lastNodeInfoSeen.erase(it);
+        } else {
+            ++it;
+        }
+    }
+
+    while (!lastNodeInfoSeen.empty() && lastNodeInfoSeen.size() > maxEntries) {
+        auto oldestIt = std::min_element(lastNodeInfoSeen.begin(), lastNodeInfoSeen.end(),
+                                         [](const std::pair<const NodeNum, uint32_t> &lhs,
+                                            const std::pair<const NodeNum, uint32_t> &rhs) { return lhs.second < rhs.second; });
+        lastNodeInfoSeen.erase(oldestIt);
+    }
+}
+
 NodeInfoModule::NodeInfoModule()
     : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfo")
 {

src/modules/NodeInfoModule.h

@@ -1,5 +1,6 @@
 #pragma once
 #include "ProtobufModule.h"
+#include <map>
 
 /**
  * NodeInfo module for sending/receiving NodeInfos into the mesh
@@ -43,6 +44,10 @@ class NodeInfoModule : public ProtobufModule<meshtastic_User>, private concurren
   private:
     uint32_t lastSentToMesh = 0; // Last time we sent our NodeInfo to the mesh
     bool shorterTimeout = false;
+    bool suppressReplyForCurrentRequest = false;
+    std::map<NodeNum, uint32_t> lastNodeInfoSeen;
+
+    void pruneLastNodeInfoCache();
 };
 
 extern NodeInfoModule *nodeInfoModule;

src/modules/PositionModule.cpp

@@ -349,6 +349,11 @@ void PositionModule::sendOurPosition()
 
 void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t channel)
 {
+    if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+        LOG_DEBUG("Skip position send; no fresh position since boot");
+        return;
+    }
+
     // cancel any not yet sent (now stale) position packets
     if (prevPacketId) // if we wrap around to zero, we'll simply fail to cancel in that rare case (no big deal)
         service->cancelSending(prevPacketId);
@@ -420,8 +425,14 @@ int32_t PositionModule::runOnce()
         return RUNONCE_INTERVAL;
     }
 
+    bool waitingForFreshPosition = (lastGpsSend == 0) && !config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot();
+
     if (lastGpsSend == 0 || msSinceLastSend >= intervalMs) {
-        if (nodeDB->hasValidPosition(node)) {
+        if (waitingForFreshPosition) {
+#ifdef GPS_DEBUG
+            LOG_DEBUG("Skip initial position send; no fresh position since boot");
+#endif
+        } else if (nodeDB->hasValidPosition(node)) {
             lastGpsSend = now;
 
             lastGpsLatitude = node->position.latitude_i;

src/modules/RoutingModule.cpp

@@ -58,12 +58,11 @@ void RoutingModule::sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketI
     router->sendLocal(p); // we sometimes send directly to the local node
 }
 
-uint8_t RoutingModule::getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit)
+uint8_t RoutingModule::getHopLimitForResponse(const meshtastic_MeshPacket &mp)
 {
-    if (hopStart != 0) {
-        // Hops used by the request. If somebody in between running modified firmware modified it, ignore it
-        uint8_t hopsUsed = hopStart < hopLimit ? config.lora.hop_limit : hopStart - hopLimit;
-        if (hopsUsed > config.lora.hop_limit) {
+    const int8_t hopsUsed = getHopsAway(mp);
+    if (hopsUsed >= 0) {
+        if (hopsUsed > (int32_t)(config.lora.hop_limit)) {
 // In event mode, we never want to send packets with more than our default 3 hops.
 #if !(EVENTMODE)             // This falls through to the default.
             return hopsUsed; // If the request used more hops than the limit, use the same amount of hops

src/modules/RoutingModule.h

@@ -20,7 +20,7 @@ class RoutingModule : public ProtobufModule<meshtastic_Routing>
                                        uint8_t hopLimit = 0);
 
     // Given the hopStart and hopLimit upon reception of a request, return the hop limit to use for the response
-    uint8_t getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit);
+    uint8_t getHopLimitForResponse(const meshtastic_MeshPacket &mp);
 
   protected:
     friend class Router;

src/modules/SerialModule.cpp

@@ -63,9 +63,9 @@
 SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
-#if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
-    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) ||      \
-    defined(MUZI_BASE)
+#if defined(TTGO_T_ECHO) || defined(TTGO_T_ECHO_PLUS) || defined(CANARYONE) || defined(MESHLINK) ||                              \
+    defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) ||      \
+    defined(ELECROW_ThinkNode_M3) || defined(MUZI_BASE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
 {
     api_type = TYPE_SERIAL;
@@ -204,8 +204,9 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-#elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                             \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
+#elif !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) &&                     \
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
+    !defined(MUZI_BASE)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
                 Serial2.setFIFOSize(RX_BUFFER);
@@ -261,7 +262,7 @@ int32_t SerialModule::runOnce()
                 }
             }
 
-#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                               \
+#if !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) && \
     !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
@@ -536,9 +537,9 @@ ParsedLine parseLine(const char *line)
  */
 void SerialModule::processWXSerial()
 {
-#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
-    !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
+#if !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) &&                       \
+    !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) &&                               \
+    !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/StatusLEDModule.cpp

@@ -20,13 +20,17 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
     switch (arg->getStatusType()) {
     case STATUS_TYPE_POWER: {
         meshtastic::PowerStatus *powerStatus = (meshtastic::PowerStatus *)arg;
-        if (powerStatus->getHasUSB()) {
+        if (powerStatus->getHasUSB() || powerStatus->getIsCharging()) {
             power_state = charging;
             if (powerStatus->getBatteryChargePercent() >= 100) {
                 power_state = charged;
             }
         } else {
-            power_state = discharging;
+            if (powerStatus->getBatteryChargePercent() > 5) {
+                power_state = discharging;
+            } else {
+                power_state = critical;
+            }
         }
         break;
     }
@@ -58,16 +62,33 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
 
 int32_t StatusLEDModule::runOnce()
 {
+    my_interval = 1000;
 
     if (power_state == charging) {
         CHARGE_LED_state = !CHARGE_LED_state;
     } else if (power_state == charged) {
         CHARGE_LED_state = LED_STATE_ON;
+    } else if (power_state == critical) {
+        if (POWER_LED_starttime + 30000 < millis() && !doing_fast_blink) {
+            doing_fast_blink = true;
+            POWER_LED_starttime = millis();
+        }
+        if (doing_fast_blink) {
+            PAIRING_LED_state = LED_STATE_OFF;
+            CHARGE_LED_state = !CHARGE_LED_state;
+            my_interval = 250;
+            if (POWER_LED_starttime + 2000 < millis()) {
+                doing_fast_blink = false;
+            }
+        } else {
+            CHARGE_LED_state = LED_STATE_OFF;
+        }
+
     } else {
         CHARGE_LED_state = LED_STATE_OFF;
     }
 
-    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis() || doing_fast_blink) {
         PAIRING_LED_state = LED_STATE_OFF;
     } else if (ble_state == unpaired) {
         if (slowTrack) {

src/modules/StatusLEDModule.h

@@ -31,8 +31,10 @@ class StatusLEDModule : private concurrency::OSThread
     bool PAIRING_LED_state = LED_STATE_OFF;
 
     uint32_t PAIRING_LED_starttime = 0;
+    uint32_t POWER_LED_starttime = 0;
+    bool doing_fast_blink = false;
 
-    enum PowerState { discharging, charging, charged };
+    enum PowerState { discharging, charging, charged, critical };
 
     PowerState power_state = discharging;
 

src/modules/TraceRouteModule.cpp

@@ -1,5 +1,6 @@
 #include "TraceRouteModule.h"
 #include "MeshService.h"
+#include "NodeDB.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -359,10 +360,10 @@ void TraceRouteModule::insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_Ro
     }
 
     // Only insert unknown hops if hop_start is valid
-    if (p.hop_start != 0 && p.hop_limit <= p.hop_start) {
-        uint8_t hopsTaken = p.hop_start - p.hop_limit;
+    const int8_t hopsTaken = getHopsAway(p);
+    if (hopsTaken >= 0) {
         int8_t diff = hopsTaken - *route_count;
-        for (uint8_t i = 0; i < diff; i++) {
+        for (int8_t i = 0; i < diff; i++) {
             if (*route_count < ROUTE_SIZE) {
                 route[*route_count] = NODENUM_BROADCAST; // This will represent an unknown hop
                 *route_count += 1;
@@ -370,7 +371,7 @@ void TraceRouteModule::insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_Ro
         }
         // Add unknown SNR values if necessary
         diff = *route_count - *snr_count;
-        for (uint8_t i = 0; i < diff; i++) {
+        for (int8_t i = 0; i < diff; i++) {
             if (*snr_count < ROUTE_SIZE) {
                 snr_list[*snr_count] = INT8_MIN; // This will represent an unknown SNR
                 *snr_count += 1;

src/platform/portduino/PortduinoGlue.cpp

@@ -279,7 +279,7 @@ void portduinoSetup()
         //      RAK6421-13300-S1:aabbcc123456:5ba85807d92138b7519cfb60460573af:3061e8d8
         // <model string>:mac address :<16 random unique bytes in hexidecimal> : crc32
         // crc32 is calculated on the eeprom string up to but not including the final colon
-        if (strlen(autoconf_product) < 6) {
+        if (strlen(autoconf_product) < 6 && portduino_config.i2cdev != "") {
             try {
                 char *mac_start = nullptr;
                 char *devID_start = nullptr;
@@ -867,4 +867,4 @@ void readGPIOFromYaml(YAML::Node sourceNode, pinMapping &destPin, int pinDefault
         destPin.line = destPin.pin;
         destPin.gpiochip = portduino_config.lora_default_gpiochip;
     }
-}
+}

src/serialization/MeshPacketSerializer.cpp

@@ -418,8 +418,9 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
         jsonObj["rssi"] = new JSONValue((int)mp->rx_rssi);
     if (mp->rx_snr != 0)
         jsonObj["snr"] = new JSONValue((float)mp->rx_snr);
-    if (mp->hop_start != 0 && mp->hop_limit <= mp->hop_start) {
-        jsonObj["hops_away"] = new JSONValue((unsigned int)(mp->hop_start - mp->hop_limit));
+    const int8_t hopsAway = getHopsAway(*mp);
+    if (hopsAway >= 0) {
+        jsonObj["hops_away"] = new JSONValue((unsigned int)(hopsAway));
         jsonObj["hop_start"] = new JSONValue((unsigned int)(mp->hop_start));
     }
 
@@ -450,8 +451,9 @@ std::string MeshPacketSerializer::JsonSerializeEncrypted(const meshtastic_MeshPa
         jsonObj["rssi"] = new JSONValue((int)mp->rx_rssi);
     if (mp->rx_snr != 0)
         jsonObj["snr"] = new JSONValue((float)mp->rx_snr);
-    if (mp->hop_start != 0 && mp->hop_limit <= mp->hop_start) {
-        jsonObj["hops_away"] = new JSONValue((unsigned int)(mp->hop_start - mp->hop_limit));
+    const int8_t hopsAway = getHopsAway(*mp);
+    if (hopsAway >= 0) {
+        jsonObj["hops_away"] = new JSONValue((unsigned int)(hopsAway));
         jsonObj["hop_start"] = new JSONValue((unsigned int)(mp->hop_start));
     }
     jsonObj["size"] = new JSONValue((unsigned int)mp->encrypted.size);

src/serialization/MeshPacketSerializer_nRF52.cpp

@@ -358,8 +358,9 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
         jsonObj["rssi"] = (int)mp->rx_rssi;
     if (mp->rx_snr != 0)
         jsonObj["snr"] = (float)mp->rx_snr;
-    if (mp->hop_start != 0 && mp->hop_limit <= mp->hop_start) {
-        jsonObj["hops_away"] = (unsigned int)(mp->hop_start - mp->hop_limit);
+    const int8_t hopsAway = getHopsAway(*mp);
+    if (hopsAway >= 0) {
+        jsonObj["hops_away"] = (unsigned int)(hopsAway);
         jsonObj["hop_start"] = (unsigned int)(mp->hop_start);
     }
 
@@ -393,8 +394,9 @@ std::string MeshPacketSerializer::JsonSerializeEncrypted(const meshtastic_MeshPa
         jsonObj["rssi"] = (int)mp->rx_rssi;
     if (mp->rx_snr != 0)
         jsonObj["snr"] = (float)mp->rx_snr;
-    if (mp->hop_start != 0 && mp->hop_limit <= mp->hop_start) {
-        jsonObj["hops_away"] = (unsigned int)(mp->hop_start - mp->hop_limit);
+    const int8_t hopsAway = getHopsAway(*mp);
+    if (hopsAway >= 0) {
+        jsonObj["hops_away"] = (unsigned int)(hopsAway);
         jsonObj["hop_start"] = (unsigned int)(mp->hop_start);
     }
     jsonObj["size"] = (unsigned int)mp->encrypted.size;

userPrefs.jsonc

@@ -55,6 +55,7 @@
   // "USERPREFS_MQTT_TLS_ENABLED": "false",
   // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
+  // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
   // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
   "USERPREFS_TZ_STRING": "tzplaceholder                                         "

variants/esp32s3/t-deck-pro/variant.h

@@ -100,3 +100,5 @@
 #define MODEM_DTR 8
 #define MODEM_RX 10
 #define MODEM_TX 11
+
+#define HAS_PHYSICAL_KEYBOARD 1

variants/esp32s3/t-deck/variant.h

@@ -23,6 +23,7 @@
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
 #define USE_TFTDISPLAY 1
+#define HAS_PHYSICAL_KEYBOARD 1
 
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16

variants/esp32s3/t-watch-s3/variant.h

@@ -20,6 +20,8 @@
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 #define USE_TFTDISPLAY 1
 
+#define HAS_DRV2605 1
+
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
 #define SCREEN_TOUCH_USE_I2C1

variants/esp32s3/tlora-pager/variant.h

@@ -21,10 +21,13 @@
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
 #define USE_TFTDISPLAY 1
+#define HAS_PHYSICAL_KEYBOARD 1
 
 #define I2C_SDA SDA
 #define I2C_SCL SCL
 
+#define HAS_DRV2605 1
+
 #define USE_POWERSAVE
 #define SLEEP_TIME 120
 

variants/nrf52840/ELECROW-ThinkNode-M3/variant.h

@@ -54,6 +54,7 @@ extern "C" {
 #define LED_POWER red_LED_PIN
 #define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED
 #define green_LED_PIN 35
+#define PIN_LED2 green_LED_PIN
 #define LED_BLUE 37
 #define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED
 

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -41,3 +41,30 @@ void initVariant()
     pinMode(VDD_FLASH_EN, OUTPUT);
     digitalWrite(VDD_FLASH_EN, HIGH);
 }
+
+// called from main-nrf52.cpp during the cpuDeepSleep() function
+void variant_shutdown()
+{
+    // This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == PIN_GPS_EN || pin == ADC_CTRL || pin == PIN_BUTTON1 || pin == PIN_SPI_MISO || pin == PIN_SPI_MOSI ||
+            pin == PIN_SPI_SCK) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+
+    digitalWrite(PIN_GPS_EN, LOW);
+    digitalWrite(ADC_CTRL, LOW);
+    // digitalWrite(RTC_POWER, LOW);
+
+    nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+}

variants/nrf52840/ELECROW-ThinkNode-M6/variant.h

@@ -44,8 +44,10 @@ extern "C" {
 #define LED_BLUE -1
 #define LED_CHARGE (12)
 #define LED_PAIRING (7)
+#define PIN_LED2 LED_PAIRING
 
-#define LED_STATE_ON 1
+#define LED_STATE_ON HIGH
+#define LED_STATE_OFF LOW
 
 // USB power detection
 #define EXT_PWR_DETECT (13)

variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h

@@ -90,16 +90,16 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define BUTTON_PIN (32 + 0) // P1.00
 
 // GPS
-#define PIN_GPS_TX (0 + 20) // P0.20 - This is data from the MCU
-#define PIN_GPS_RX (0 + 22) // P0.22 - This is data from the GNSS
+#define GPS_TX_PIN (0 + 20) // P0.20 - This is data from the MCU
+#define GPS_RX_PIN (0 + 22) // P0.22 - This is data from the GNSS
 
 #define PIN_GPS_EN (0 + 24) // P0.24
 #define GPS_UBLOX
 // define GPS_DEBUG
 
 // UART interfaces
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 
 #define PIN_SERIAL2_RX (0 + 6) // P0.06
 #define PIN_SERIAL2_TX (0 + 8) // P0.08

variants/nrf52840/nano-g2-ultra/variant.h

@@ -132,13 +132,13 @@ External serial flash W25Q16JV_IQ
 #define GPS_L76K
 
 #define PIN_GPS_STANDBY (0 + 13) // An output to wake GPS, low means allow sleep, high means force wake STANDBY
-#define PIN_GPS_TX (0 + 10)      // This is for bits going TOWARDS the CPU
-#define PIN_GPS_RX (0 + 9)       // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (0 + 10)      // This is for bits going FROM the CPU
+#define GPS_RX_PIN (0 + 9)       // This is for bits going FROM the GPS
 
 // #define GPS_THREAD_INTERVAL 50
 
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51

variants/nrf52840/seeed_solar_node/variant.h

@@ -116,13 +116,13 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_TX D6 // 44
-#define PIN_GPS_RX D7 // 43
+#define GPS_TX_PIN D6 // 44
+#define GPS_RX_PIN D7 // 43
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_GPS_STANDBY D0
 #define GPS_EN D18 // P1.05
 #endif

variants/nrf52840/seeed_wio_tracker_L1/variant.h

@@ -119,16 +119,14 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6 // P0.26
-#define PIN_GPS_TX D7
+#define GPS_TX_PIN D6 // P0.26 - This is data from the MCU
+#define GPS_RX_PIN D7 // P0.27 - This is data from the GNSS
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
 
-#define GPS_RX_PIN PIN_GPS_TX
-#define GPS_TX_PIN PIN_GPS_RX
 #define PIN_GPS_STANDBY D0
 
 // #define GPS_DEBUG

variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h

@@ -129,16 +129,14 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6 // P0.26
-#define PIN_GPS_TX D7
+#define GPS_TX_PIN D6 // P0.26 - This is data from the MCU
+#define GPS_RX_PIN D7 // P0.27 - This is data from the GNSS
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
 
-#define GPS_RX_PIN PIN_GPS_TX
-#define GPS_TX_PIN PIN_GPS_RX
 #define PIN_GPS_STANDBY D0
 
 // #define GPS_DEBUG

variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h

@@ -147,12 +147,12 @@ static const uint8_t SCK = PIN_SPI_SCK;
  */
 // GPS L76K
 #ifdef GPS_L76K
-#define PIN_GPS_TX D6
-#define PIN_GPS_RX D7
+#define GPS_TX_PIN D6 // This is data from the MCU
+#define GPS_RX_PIN D7 // This is data from the GNSS module
 #define HAS_GPS 1
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_GPS_STANDBY D0
 #else
 #define PIN_SERIAL1_RX (-1)

variants/nrf52840/t-echo-plus/nicheGraphics.h

@@ -0,0 +1,70 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
+#include "graphics/niche/Drivers/EInk/GDEY0154D67.h"
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+#include "graphics/niche/InkHUD/InkHUD.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    SPI1.begin();
+
+    Drivers::EInk *driver = new Drivers::GDEY0154D67;
+    driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+    inkhud->setDriver(driver);
+    inkhud->setDisplayResilience(20, 1.5);
+    InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
+    InkHUD::Applet::fontMedium = FREESANS_9PT_WIN1252;
+    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+    inkhud->persistence->settings.userTiles.maxCount = 2;
+    inkhud->persistence->settings.rotation = 3;
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true;
+    inkhud->persistence->settings.optionalMenuItems.backlight = true;
+
+    Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
+    backlight->setPin(PIN_EINK_BL);
+
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true);
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);
+
+    inkhud->begin();
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance();
+
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
+    buttons->setTiming(0, 75, 500);
+    buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
+    buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
+
+    buttons->setWiring(1, PIN_BUTTON_TOUCH);
+    buttons->setTiming(1, 50, 5000);
+    buttons->setHandlerDown(1, [inkhud, backlight]() {
+        backlight->peek();
+        inkhud->persistence->settings.optionalMenuItems.backlight = false;
+    });
+    buttons->setHandlerLongPress(1, [backlight]() { backlight->latch(); });
+    buttons->setHandlerShortPress(1, [backlight]() { backlight->off(); });
+
+    buttons->start();
+}
+
+#endif

variants/nrf52840/t-echo-plus/platformio.ini

@@ -0,0 +1,26 @@
+[env:t-echo-plus]
+extends = nrf52840_base
+board = t-echo
+board_level = pr
+board_check = true
+debug_tool = jlink
+
+build_flags = ${nrf52840_base.build_flags}
+  -D PRIVATE_HW
+  -Ivariants/nrf52840/t-echo-plus
+  -DEINK_DISPLAY_MODEL=GxEPD2_154_D67
+  -DEINK_WIDTH=200
+  -DEINK_HEIGHT=200
+  -DUSE_EINK
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=20          ; How many consecutive fast-refreshes are permitted
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+  -DI2C_NO_RESCAN
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/t-echo-plus>
+
+lib_deps =
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
+  lewisxhe/PCF8563_Library@^1.0.1
+  adafruit/Adafruit DRV2605 Library@1.2.4

variants/nrf52840/t-echo-plus/variant.cpp

@@ -0,0 +1,24 @@
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LEDs (if populated)
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    pinMode(PIN_LED3, OUTPUT);
+    ledOff(PIN_LED3);
+}

variants/nrf52840/t-echo-plus/variant.h

@@ -0,0 +1,148 @@
+#ifndef _VARIANT_T_ECHO_PLUS_
+#define _VARIANT_T_ECHO_PLUS_
+
+#define VARIANT_MCK (64000000ul)
+#define USE_LFXO
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define TTGO_T_ECHO_PLUS
+
+// Pin counts
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs (not documented on pinmap; keep defaults for compatibility)
+#define PIN_LED1 (0 + 14)
+#define PIN_LED2 (0 + 15)
+#define PIN_LED3 (0 + 13)
+
+#define LED_RED PIN_LED3
+#define LED_BLUE PIN_LED1
+#define LED_GREEN PIN_LED2
+
+#define LED_BUILTIN LED_BLUE
+#define LED_CONN LED_GREEN
+
+#define LED_STATE_ON 0
+
+// Buttons / touch
+#define PIN_BUTTON1 (32 + 10)
+#define BUTTON_ACTIVE_LOW true
+#define BUTTON_ACTIVE_PULLUP true
+#define PIN_BUTTON2 (0 + 18)      // reset-labelled but usable as GPIO
+#define PIN_BUTTON_TOUCH (0 + 11) // capacitive touch
+#define BUTTON_TOUCH_ACTIVE_LOW true
+#define BUTTON_TOUCH_ACTIVE_PULLUP true
+
+#define BUTTON_CLICK_MS 400
+#define BUTTON_TOUCH_MS 200
+
+// Analog
+#define PIN_A0 (4)
+#define BATTERY_PIN PIN_A0
+static const uint8_t A0 = PIN_A0;
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (2.0F)
+
+// NFC
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+// I2C (IMU BHI260AP, RTC, etc.)
+#define WIRE_INTERFACES_COUNT 1
+#define PIN_WIRE_SDA (0 + 26)
+#define PIN_WIRE_SCL (0 + 27)
+#define HAS_BHI260AP
+
+#define TP_SER_IO (0 + 11)
+
+// RTC interrupt
+#define PIN_RTC_INT (0 + 16)
+
+// QSPI flash
+#define PIN_QSPI_SCK (32 + 14)
+#define PIN_QSPI_CS (32 + 15)
+#define PIN_QSPI_IO0 (32 + 12)
+#define PIN_QSPI_IO1 (32 + 13)
+#define PIN_QSPI_IO2 (0 + 7)
+#define PIN_QSPI_IO3 (0 + 5)
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES MX25R1635F
+#define EXTERNAL_FLASH_USE_QSPI
+
+// LoRa SX1262
+#define USE_SX1262
+#define USE_SX1268
+#define SX126X_CS (0 + 24)
+#define SX126X_DIO1 (0 + 20)
+#define SX1262_DIO3 (0 + 21)
+#define SX126X_BUSY (0 + 17)
+#define SX126X_RESET (0 + 25)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define TCXO_OPTIONAL
+
+#define SPI_INTERFACES_COUNT 2
+
+#define PIN_SPI_MISO (0 + 23)
+#define PIN_SPI_MOSI (0 + 22)
+#define PIN_SPI_SCK (0 + 19)
+
+// E-paper (1.54" per pinmap)
+// Alias PIN_EINK_EN to keep common eink power control code working
+#define PIN_EINK_BL (32 + 11) // backlight / panel power switch
+#define PIN_EINK_EN PIN_EINK_BL
+#define PIN_EINK_CS (0 + 30)
+#define PIN_EINK_BUSY (0 + 3)
+#define PIN_EINK_DC (0 + 28)
+#define PIN_EINK_RES (0 + 2)
+#define PIN_EINK_SCLK (0 + 31)
+#define PIN_EINK_MOSI (0 + 29) // also called SDI
+
+// Power control
+#define PIN_POWER_EN (0 + 12)
+
+#define PIN_SPI1_MISO (32 + 7) // Placeholder MISO; keep off QSPI pins to avoid contention
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+
+// GPS (TX/RX/Wake/Reset/PPS per pinmap)
+#define GPS_L76K
+#define PIN_GPS_REINIT (32 + 5)  // Reset
+#define PIN_GPS_STANDBY (32 + 2) // Wake
+#define PIN_GPS_PPS (32 + 4)
+#define GPS_TX_PIN (32 + 8)
+#define GPS_RX_PIN (32 + 9)
+#define GPS_THREAD_INTERVAL 50
+#define NO_GPS 1
+
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
+
+// Sensors / accessories (disable buzzer/driver to avoid PWM pin use on this variant)
+#define PIN_BUZZER (0 + 6)
+#define PIN_DRV_EN (0 + 8)
+
+#define HAS_DRV2605 1
+
+// Battery / ADC already defined above
+#define HAS_RTC 1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

variants/rp2040/rp2040.ini

@@ -2,12 +2,12 @@
 [rp2040_base]
 platform =
   # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  ; For arduino-pico >= 5.4.4
 extends = arduino_base
 platform_packages =
   # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -17,6 +17,7 @@ build_flags =
   -Isrc/platform/rp2xx0/hardware_rosc/include
   -Isrc/platform/rp2xx0/pico_sleep/include
   -D__PLAT_RP2040__
+  -D__FREERTOS=1
 #  -D _POSIX_THREADS
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>

variants/rp2350/rp2350.ini

@@ -2,12 +2,12 @@
 [rp2350_base]
 platform =
   # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  ; For arduino-pico >= 5.4.4
 extends = arduino_base
 platform_packages =
   # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -15,6 +15,7 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
   -Isrc/platform/rp2xx0
   -D__PLAT_RP2350__
+  -D__FREERTOS=1
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>