Revert "Upgrade all esp32 targets to NimBLE 2.X (#9003 )"

This reverts commit 40f1f91c0d.
Upgrade trunk (#9121 )
2025-12-30 22:50:57 +00:00 · 2025-12-30 13:51:31 -06:00 · 2025-12-30 07:10:36 -06:00 · 2025-12-29 19:09:44 +01:00 · 2025-12-29 06:50:12 -06:00 · 2025-12-29 06:03:03 -06:00
52 changed files with 374 additions and 150 deletions
--- a/.github/actions/build-variant/action.yml
+++ b/.github/actions/build-variant/action.yml
@@ -100,7 +100,7 @@ runs:
      id: version

    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v5
+      uses: actions/upload-artifact@v6
      with:
        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
        overwrite: true
--- a/.github/workflows/build_debian_src.yml
+++ b/.github/workflows/build_debian_src.yml
@@ -64,7 +64,7 @@ jobs:
          PKG_VERSION: ${{ steps.version.outputs.deb }}

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          overwrite: true
--- a/.github/workflows/build_firmware.yml
+++ b/.github/workflows/build_firmware.yml
@@ -56,19 +56,21 @@ jobs:
          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}

-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
+      - name: Job summary
        env:
          PIO_ENV: ${{ inputs.pio_env }}
        run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
+          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
+          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```json' >> $GITHUB_STEP_SUMMARY
          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        id: upload
        with:
          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
--- a/.github/workflows/build_one_target.yml
+++ b/.github/workflows/build_one_target.yml
@@ -98,7 +98,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-*-*
@@ -111,7 +111,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -127,7 +127,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-*-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -146,7 +146,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
          overwrite: true
--- a/.github/workflows/main_matrix.yml
+++ b/.github/workflows/main_matrix.yml
@@ -173,7 +173,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -183,7 +183,7 @@ jobs:
        run: ls -R

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -200,7 +200,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -219,7 +219,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -260,14 +260,14 @@ jobs:
            Autogenerated by github action, developer should edit as required before publishing...

      - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -291,7 +291,7 @@ jobs:
          }' > firmware-${{ needs.version.outputs.long }}.json

      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: manifest-${{ needs.version.outputs.long }}
          overwrite: true
@@ -332,7 +332,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -349,7 +349,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -388,14 +388,14 @@ jobs:
          python-version: 3.x

      - name: Get firmware artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
          path: ./publish

      - name: Get manifest artifact
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: manifest-${{ needs.version.outputs.long }}
          path: ./publish
--- a/.github/workflows/merge_queue.yml
+++ b/.github/workflows/merge_queue.yml
@@ -147,7 +147,7 @@ jobs:
          ref: ${{github.event.pull_request.head.ref}}
          repository: ${{github.event.pull_request.head.repo.full_name}}

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          path: ./
          pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat

      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -176,7 +176,7 @@ jobs:
            ./Meshtastic_nRF52_factory_erase*.uf2
          retention-days: 30

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          overwrite: true
@@ -235,14 +235,14 @@ jobs:
            Autogenerated by github action, developer should edit as required before publishing...

      - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
          merge-multiple: true
          path: ./output/debian-src

      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -292,7 +292,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -309,7 +309,7 @@ jobs:
      - name: Zip firmware
        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
          merge-multiple: true
@@ -347,7 +347,7 @@ jobs:
        with:
          python-version: 3.x

-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v7
        with:
          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
          merge-multiple: true
--- a/.github/workflows/package_obs.yml
+++ b/.github/workflows/package_obs.yml
@@ -58,7 +58,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
--- a/.github/workflows/package_pio_deps.yml
+++ b/.github/workflows/package_pio_deps.yml
@@ -56,7 +56,7 @@ jobs:
          PLATFORMIO_CORE_DIR: pio/core

      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
          overwrite: true
--- a/.github/workflows/package_ppa.yml
+++ b/.github/workflows/package_ppa.yml
@@ -60,7 +60,7 @@ jobs:
        id: version

      - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
          merge-multiple: true
--- a/.github/workflows/pr_tests.yml
+++ b/.github/workflows/pr_tests.yml
@@ -50,7 +50,7 @@ jobs:

      - name: Download test artifacts
        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
--- a/.github/workflows/sec_sast_semgrep_cron.yml
+++ b/.github/workflows/sec_sast_semgrep_cron.yml
@@ -33,7 +33,7 @@ jobs:

      # step 3
      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: report.sarif
          overwrite: true
--- a/.github/workflows/test_native.yml
+++ b/.github/workflows/test_native.yml
@@ -59,7 +59,7 @@ jobs:
        id: version

      - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
@@ -94,7 +94,7 @@ jobs:

      - name: Save test results
        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          overwrite: true
@@ -108,7 +108,7 @@ jobs:
          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.

      - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        if: always() # run this step even if previous step failed
        with:
          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
@@ -137,7 +137,7 @@ jobs:
        id: version

      - name: Download test artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          name: platformio-test-report-${{ steps.version.outputs.long }}
          merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
          reporter: java-junit

      - name: Download coverage artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v7
        with:
          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
          path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report

      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v6
        with:
          name: code-coverage-report-${{ steps.version.outputs.long }}
          path: code-coverage-report
--- a/.trunk/trunk.yaml
+++ b/.trunk/trunk.yaml
@@ -8,15 +8,15 @@ plugins:
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.495
-    - renovate@42.48.0
+    - checkov@3.2.496
+    - renovate@42.66.14
    - prettier@3.7.4
-    - trufflehog@3.92.3
+    - trufflehog@3.92.4
    - yamllint@1.37.1
    - bandit@1.9.2
-    - trivy@0.68.1
+    - trivy@0.68.2
    - taplo@0.10.0
-    - ruff@0.14.9
+    - ruff@0.14.10
    - isort@7.0.0
    - markdownlint@0.47.0
    - oxipng@10.0.0
--- a/bin/build-nrf52.sh
+++ b/bin/build-nrf52.sh
@@ -21,13 +21,14 @@ rm -f $BUILDDIR/firmware*
 export APP_VERSION=$VERSION

 basename=firmware-$1-$VERSION
+ota_basename=${basename}-ota

 pio run --environment $1 -t mtjson # -v

 cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf

 echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
+cp $BUILDDIR/$basename.zip $OUTDIR/$ota_basename.zip

 echo "Copying NRF52 UF2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
--- a/bin/platformio-custom.py
+++ b/bin/platformio-custom.py
@@ -17,6 +17,8 @@ lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"

 def manifest_gather(source, target, env):
    out = []
+    board_platform = env.BoardConfig().get("platform")
+    needs_ota_suffix = board_platform == "nordicnrf52"
    check_paths = [
        progname,
        f"{progname}.elf",
@@ -32,8 +34,11 @@ def manifest_gather(source, target, env):
    for p in check_paths:
        f = env.File(env.subst(f"$BUILD_DIR/{p}"))
        if f.exists():
+            manifest_name = p
+            if needs_ota_suffix and p == f"{progname}.zip":
+                manifest_name = f"{progname}-ota.zip"
            d = {
-                "name": p,
+                "name": manifest_name,
                "md5": f.get_content_hash(), # Returns MD5 hash
                "bytes": f.get_size() # Returns file size in bytes
            }
--- a/platformio.ini
+++ b/platformio.ini
@@ -64,7 +64,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/b34c6817c25d6faabb3a8a162b5d14fb75395433.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -123,7 +123,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/2746a1ce3804998460a2cb319b8ea8a238dfd8c9.zip
+	https://github.com/meshtastic/device-ui/archive/7656d49ea2bdb81a43afc1e8552f1cc86b8dce3c.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
--- a/2
+++ b/2
--- a/src/DisplayFormatters.cpp
+++ b/src/DisplayFormatters.cpp
@@ -31,6 +31,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
        return useShortName ? "LongF" : "LongFast";
        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        return useShortName ? "LongT" : "LongTurbo";
+        break;
    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
        return useShortName ? "LongM" : "LongMod";
        break;
--- a/src/graphics/draw/MenuHandler.cpp
+++ b/src/graphics/draw/MenuHandler.cpp
@@ -20,12 +20,41 @@
 #include "modules/KeyVerificationModule.h"

 #include "modules/TraceRouteModule.h"
+#include <algorithm>
+#include <array>
 #include <functional>
+#include <utility>

 extern uint16_t TFT_MESH;

 namespace graphics
 {
+
+namespace
+{
+
+// Caller must ensure the provided options array outlives the banner callback.
+template <typename T, size_t N, typename Callback>
+BannerOverlayOptions createStaticBannerOptions(const char *message, const MenuOption<T> (&options)[N],
+                                               std::array<const char *, N> &labels, Callback &&onSelection)
+{
+    for (size_t i = 0; i < N; ++i) {
+        labels[i] = options[i].label;
+    }
+
+    const MenuOption<T> *optionsPtr = options;
+    auto callback = std::function<void(const MenuOption<T> &, int)>(std::forward<Callback>(onSelection));
+
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = message;
+    bannerOptions.optionsArrayPtr = labels.data();
+    bannerOptions.optionsCount = static_cast<uint8_t>(N);
+    bannerOptions.bannerCallback = [optionsPtr, callback](int selected) -> void { callback(optionsPtr[selected], selected); };
+    return bannerOptions;
+}
+
+} // namespace
+
 menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
@@ -197,48 +226,38 @@ void menuHandler::DeviceRolePicker()

 void menuHandler::RadioPresetPicker()
 {
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
-    enum optionsNumbers {
-        Back = 0,
-        radiopreset_LongSlow = 1,
-        radiopreset_LongModerate = 2,
-        radiopreset_LongFast = 3,
-        radiopreset_MediumSlow = 4,
-        radiopreset_MediumFast = 5,
-        radiopreset_ShortSlow = 6,
-        radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8
-    };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Radio Preset";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 9;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuHandler::menuQueue = menuHandler::lora_Menu;
-            screen->runNow();
-            return;
-        } else if (selected == radiopreset_LongSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-        } else if (selected == radiopreset_LongModerate) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE;
-        } else if (selected == radiopreset_LongFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        } else if (selected == radiopreset_MediumSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW;
-        } else if (selected == radiopreset_MediumFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-        } else if (selected == radiopreset_ShortSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW;
-        } else if (selected == radiopreset_ShortFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
-        } else if (selected == radiopreset_ShortTurbo) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-        }
-        service->reloadConfig(SEGMENT_CONFIG);
-        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+    static const RadioPresetOption presetOptions[] = {
+        {"Back", OptionsAction::Back},
+        {"LongTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO},
+        {"LongModerate", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE},
+        {"LongFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST},
+        {"MediumSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW},
+        {"MediumFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST},
+        {"ShortSlow", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW},
+        {"ShortFast", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST},
+        {"ShortTurbo", OptionsAction::Select, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO},
    };
+
+    constexpr size_t presetCount = sizeof(presetOptions) / sizeof(presetOptions[0]);
+    static std::array<const char *, presetCount> presetLabels{};
+
+    auto bannerOptions =
+        createStaticBannerOptions("Radio Preset", presetOptions, presetLabels, [](const RadioPresetOption &option, int) -> void {
+            if (option.action == OptionsAction::Back) {
+                menuHandler::menuQueue = menuHandler::lora_Menu;
+                screen->runNow();
+                return;
+            }
+
+            if (!option.hasValue) {
+                return;
+            }
+
+            config.lora.modem_preset = option.value;
+            service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        });
+
    screen->showOverlayBanner(bannerOptions);
 }

--- a/src/graphics/draw/MenuHandler.h
+++ b/src/graphics/draw/MenuHandler.h
@@ -99,5 +99,24 @@ class menuHandler
    static void BluetoothToggleMenu();
 };

+/* Generic Menu Options designations  */
+enum class OptionsAction { Back, Select };
+
+template <typename T> struct MenuOption {
+    const char *label;
+    OptionsAction action;
+    bool hasValue;
+    T value;
+
+    MenuOption(const char *labelIn, OptionsAction actionIn, T valueIn)
+        : label(labelIn), action(actionIn), hasValue(true), value(valueIn)
+    {
+    }
+
+    MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
+};
+
+using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
+
 } // namespace graphics
 #endif
--- a/src/input/RotaryEncoderInterruptImpl1.cpp
+++ b/src/input/RotaryEncoderInterruptImpl1.cpp
@@ -27,7 +27,9 @@ bool RotaryEncoderInterruptImpl1::init()
                                     RotaryEncoderInterruptImpl1::handleIntA, RotaryEncoderInterruptImpl1::handleIntB,
                                     RotaryEncoderInterruptImpl1::handleIntPressed);
    inputBroker->registerSource(this);
+#ifndef HAS_PHYSICAL_KEYBOARD
    osk_found = true;
+#endif
    return true;
 }

--- a/src/input/TrackballInterruptBase.cpp
+++ b/src/input/TrackballInterruptBase.cpp
@@ -45,7 +45,9 @@ void TrackballInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLef

    LOG_DEBUG("Trackball GPIO initialized - UP:%d DOWN:%d LEFT:%d RIGHT:%d PRESS:%d", this->_pinUp, this->_pinDown,
              this->_pinLeft, this->_pinRight, pinPress);
+#ifndef HAS_PHYSICAL_KEYBOARD
    osk_found = true;
+#endif
    this->setInterval(100);
 }

--- a/src/input/UpDownInterruptImpl1.cpp
+++ b/src/input/UpDownInterruptImpl1.cpp
@@ -29,7 +29,9 @@ bool UpDownInterruptImpl1::init()
                              eventDownLong, UpDownInterruptImpl1::handleIntDown, UpDownInterruptImpl1::handleIntUp,
                              UpDownInterruptImpl1::handleIntPressed);
    inputBroker->registerSource(this);
+#ifndef HAS_PHYSICAL_KEYBOARD
    osk_found = true;
+#endif
    return true;
 }

--- a/src/main.cpp
+++ b/src/main.cpp
@@ -440,9 +440,11 @@ void setup()
    LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n");

 #if defined(ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
+#ifndef SENSECAP_INDICATOR
    // use PSRAM for malloc calls > 256 bytes
    heap_caps_malloc_extmem_enable(256);
 #endif
+#endif

 #if defined(DEBUG_MUTE) && defined(DEBUG_PORT)
    DEBUG_PORT.printf("\r\n\r\n//\\ E S H T /\\ S T / C\r\n");
@@ -1456,8 +1458,10 @@ void setup()
 #endif

 #if defined(HAS_TRACKBALL) || (defined(INPUTDRIVER_ENCODER_TYPE) && INPUTDRIVER_ENCODER_TYPE == 2)
+#ifndef HAS_PHYSICAL_KEYBOARD
    osk_found = true;
 #endif
+#endif

 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WEBSERVER
    // Start web server thread.
--- a/src/mesh/FloodingRouter.cpp
+++ b/src/mesh/FloodingRouter.cpp
@@ -124,6 +124,10 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
    if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) {
        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
    }
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE && iface && nodeDB &&
+        nodeDB->isFromOrToFavoritedNode(*p)) {
+        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
+    }
 }

 bool FloodingRouter::isRebroadcaster()
--- a/src/mesh/MeshService.cpp
+++ b/src/mesh/MeshService.cpp
@@ -276,6 +276,10 @@ bool MeshService::trySendPosition(NodeNum dest, bool wantReplies)
    if (nodeDB->hasValidPosition(node)) {
 #if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
        if (positionModule) {
+            if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+                LOG_DEBUG("Skip position ping; no fresh position since boot");
+                return false;
+            }
            LOG_INFO("Send position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel);
            positionModule->sendOurPosition(dest, wantReplies, node->channel);
            return true;
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -805,11 +805,12 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.external_notification.output_ms = 500;
    moduleConfig.external_notification.nag_timeout = 2;
 #endif
-#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE)
-    // Default to RAK led pin 2 (blue)
+#if defined(RAK4630) || defined(RAK11310) || defined(RAK3312) || defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3) ||          \
+    defined(ELECROW_ThinkNode_M6)
+    // Default to PIN_LED2 for external notification output (LED color depends on device variant)
    moduleConfig.external_notification.enabled = true;
    moduleConfig.external_notification.output = PIN_LED2;
-#if defined(MUZI_BASE)
+#if defined(MUZI_BASE) || defined(ELECROW_ThinkNode_M3)
    moduleConfig.external_notification.active = false;
 #else
    moduleConfig.external_notification.active = true;
@@ -1043,6 +1044,7 @@ void NodeDB::clearLocalPosition()
    node->position.altitude = 0;
    node->position.time = 0;
    setLocalPosition(meshtastic_Position_init_default);
+    localPositionUpdatedSinceBoot = false;
 }

 void NodeDB::cleanupMeshDB()
--- a/src/mesh/NodeDB.h
+++ b/src/mesh/NodeDB.h
@@ -279,9 +279,13 @@ class NodeDB
        LOG_DEBUG("Set local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i,
                  position.time, position.timestamp);
        localPosition = position;
+        if (position.latitude_i != 0 || position.longitude_i != 0) {
+            localPositionUpdatedSinceBoot = true;
+        }
    }

    bool hasValidPosition(const meshtastic_NodeInfoLite *n);
+    bool hasLocalPositionSinceBoot() const { return localPositionUpdatedSinceBoot; }

 #if !defined(MESHTASTIC_EXCLUDE_PKI)
    bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
@@ -301,6 +305,7 @@ class NodeDB

  private:
    bool duplicateWarned = false;
+    bool localPositionUpdatedSinceBoot = false;
    uint32_t lastNodeDbSave = 0;    // when we last saved our db to flash
    uint32_t lastBackupAttempt = 0; // when we last tried a backup automatically or manually
    uint32_t lastSort = 0;          // When last sorted the nodeDB
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -296,11 +296,6 @@ bool RadioInterface::shouldRebroadcastEarlyLikeRouter(meshtastic_MeshPacket *p)
        return true;
    }

-    // If we are a CLIENT_BASE and the packet is from or to a favorited node, we should rebroadcast early
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
-        return nodeDB->isFromOrToFavoritedNode(*p);
-    }
-
    return false;
 }

@@ -503,6 +498,11 @@ void RadioInterface::applyModemConfig()
                cr = 5;
                sf = 10;
                break;
+            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+                bw = (myRegion->wideLora) ? 1625.0 : 500;
+                cr = 8;
+                sf = 11;
+                break;
            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
                bw = (myRegion->wideLora) ? 812.5 : 250;
                cr = 5;
@@ -539,13 +539,26 @@ void RadioInterface::applyModemConfig()
        }

        if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
-            static const char *err_string = "Regional frequency range is smaller than bandwidth. Fall back to default preset";
-            LOG_ERROR(err_string);
+            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
+            const float requestedBwKHz = bw;
+            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
+            const char *presetName =
+                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
+
+            char err_string[160];
+            if (isWideRequest) {
+                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
+                         myRegion->name, presetName);
+            } else {
+                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
+                         myRegion->name, regionSpanKHz, requestedBwKHz);
+            }
+            LOG_ERROR("%s", err_string);
            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);

            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
            cn->level = meshtastic_LogRecord_Level_ERROR;
-            sprintf(cn->message, err_string);
+            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
            service->sendClientNotification(cn);

            // Set to default modem preset
--- a/src/mesh/generated/meshtastic/config.pb.h
+++ b/src/mesh/generated/meshtastic/config.pb.h
@@ -293,7 +293,8 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
 typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
    /* Long Range - Fast */
    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST = 0,
-    /* Long Range - Slow */
+    /* Long Range - Slow
+ Deprecated in 2.7: Unpopular slow preset. */
    meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW = 1,
    /* Very Long Range - Slow
 Deprecated in 2.5: Works only with txco and is unusably slow */
@@ -311,7 +312,10 @@ typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
    /* Short Range - Turbo
 This is the fastest preset and the only one with 500kHz bandwidth.
 It is not legal to use in all regions due to this wider bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8
+    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8,
+    /* Long Range - Turbo
+ This preset performs similarly to LongFast, but with 500Khz bandwidth. */
+    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9
 } meshtastic_Config_LoRaConfig_ModemPreset;

 typedef enum _meshtastic_Config_BluetoothConfig_PairingMode {
@@ -689,8 +693,8 @@ extern "C" {
 #define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_BR_902+1))

 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
-#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO
-#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO+1))
+#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO
+#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO+1))

 #define _meshtastic_Config_BluetoothConfig_PairingMode_MIN meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN
 #define _meshtastic_Config_BluetoothConfig_PairingMode_MAX meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN
--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -417,6 +417,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
    }
    case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
        LOG_INFO("Client requesting to enter DFU mode");
+#if HAS_SCREEN
+        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
+#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
        enterDfuMode();
 #endif
--- a/src/modules/NodeInfoModule.cpp
+++ b/src/modules/NodeInfoModule.cpp
@@ -7,17 +7,41 @@
 #include "configuration.h"
 #include "main.h"
 #include <Throttle.h>
+#include <algorithm>
+
+#ifndef USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS
+#define USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS (12 * 60 * 60)
+#endif

 NodeInfoModule *nodeInfoModule;

+static constexpr uint32_t NodeInfoReplySuppressSeconds = USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS;
+
 bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_User *pptr)
 {
+    suppressReplyForCurrentRequest = false;
+
    if (mp.from == nodeDB->getNodeNum()) {
        LOG_WARN("Ignoring packet supposed to be from our own node: %08x", mp.from);
        return false;
    }

    auto p = *pptr;
+
+    if (mp.decoded.want_response) {
+        const NodeNum sender = getFrom(&mp);
+        const uint32_t now = mp.rx_time ? mp.rx_time : getTime();
+        auto it = lastNodeInfoSeen.find(sender);
+        if (it != lastNodeInfoSeen.end()) {
+            uint32_t sinceLast = now >= it->second ? now - it->second : 0;
+            if (sinceLast < NodeInfoReplySuppressSeconds) {
+                suppressReplyForCurrentRequest = true;
+            }
+        }
+        lastNodeInfoSeen[sender] = now;
+        pruneLastNodeInfoCache();
+    }
+
    if (p.is_licensed != owner.is_licensed) {
        LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
        return true;
@@ -42,6 +66,8 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
        service->sendToPhone(packetCopy);
    }

+    pruneLastNodeInfoCache();
+
    // LOG_DEBUG("did handleReceived");
    return false; // Let others look at this message also if they want
 }
@@ -68,9 +94,11 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha

    if (p) { // Check whether we didn't ignore it
        p->to = dest;
-        p->decoded.want_response = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
+        bool requestWantResponse = (config.device.role != meshtastic_Config_DeviceConfig_Role_TRACKER &&
                                    config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
                                   wantReplies;
+
+        p->decoded.want_response = requestWantResponse;
        if (_shorterTimeout)
            p->priority = meshtastic_MeshPacket_Priority_DEFAULT;
        else
@@ -89,6 +117,13 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha

 meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
+    if (suppressReplyForCurrentRequest) {
+        LOG_DEBUG("Skip send NodeInfo since we heard the requester <12h ago");
+        ignoreRequest = true;
+        suppressReplyForCurrentRequest = false;
+        return NULL;
+    }
+
    if (!airTime->isTxAllowedChannelUtil(false)) {
        ignoreRequest = true; // Mark it as ignored for MeshModule
        LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
@@ -125,6 +160,29 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
    }
 }

+void NodeInfoModule::pruneLastNodeInfoCache()
+{
+    if (!nodeDB || !nodeDB->meshNodes)
+        return;
+
+    const size_t maxEntries = nodeDB->meshNodes->size();
+
+    for (auto it = lastNodeInfoSeen.begin(); it != lastNodeInfoSeen.end();) {
+        if (!nodeDB->getMeshNode(it->first)) {
+            it = lastNodeInfoSeen.erase(it);
+        } else {
+            ++it;
+        }
+    }
+
+    while (!lastNodeInfoSeen.empty() && lastNodeInfoSeen.size() > maxEntries) {
+        auto oldestIt = std::min_element(lastNodeInfoSeen.begin(), lastNodeInfoSeen.end(),
+                                         [](const std::pair<const NodeNum, uint32_t> &lhs,
+                                            const std::pair<const NodeNum, uint32_t> &rhs) { return lhs.second < rhs.second; });
+        lastNodeInfoSeen.erase(oldestIt);
+    }
+}
+
 NodeInfoModule::NodeInfoModule()
    : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfo")
 {
--- a/src/modules/NodeInfoModule.h
+++ b/src/modules/NodeInfoModule.h
@@ -1,5 +1,6 @@
 #pragma once
 #include "ProtobufModule.h"
+#include <map>

 /**
 * NodeInfo module for sending/receiving NodeInfos into the mesh
@@ -43,6 +44,10 @@ class NodeInfoModule : public ProtobufModule<meshtastic_User>, private concurren
  private:
    uint32_t lastSentToMesh = 0; // Last time we sent our NodeInfo to the mesh
    bool shorterTimeout = false;
+    bool suppressReplyForCurrentRequest = false;
+    std::map<NodeNum, uint32_t> lastNodeInfoSeen;
+
+    void pruneLastNodeInfoCache();
 };

 extern NodeInfoModule *nodeInfoModule;
--- a/src/modules/PositionModule.cpp
+++ b/src/modules/PositionModule.cpp
@@ -349,6 +349,11 @@ void PositionModule::sendOurPosition()

 void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t channel)
 {
+    if (!config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot()) {
+        LOG_DEBUG("Skip position send; no fresh position since boot");
+        return;
+    }
+
    // cancel any not yet sent (now stale) position packets
    if (prevPacketId) // if we wrap around to zero, we'll simply fail to cancel in that rare case (no big deal)
        service->cancelSending(prevPacketId);
@@ -420,8 +425,14 @@ int32_t PositionModule::runOnce()
        return RUNONCE_INTERVAL;
    }

+    bool waitingForFreshPosition = (lastGpsSend == 0) && !config.position.fixed_position && !nodeDB->hasLocalPositionSinceBoot();
+
    if (lastGpsSend == 0 || msSinceLastSend >= intervalMs) {
-        if (nodeDB->hasValidPosition(node)) {
+        if (waitingForFreshPosition) {
+#ifdef GPS_DEBUG
+            LOG_DEBUG("Skip initial position send; no fresh position since boot");
+#endif
+        } else if (nodeDB->hasValidPosition(node)) {
            lastGpsSend = now;

            lastGpsLatitude = node->position.latitude_i;
--- a/src/modules/StatusLEDModule.cpp
+++ b/src/modules/StatusLEDModule.cpp
@@ -20,13 +20,17 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
    switch (arg->getStatusType()) {
    case STATUS_TYPE_POWER: {
        meshtastic::PowerStatus *powerStatus = (meshtastic::PowerStatus *)arg;
-        if (powerStatus->getHasUSB()) {
+        if (powerStatus->getHasUSB() || powerStatus->getIsCharging()) {
            power_state = charging;
            if (powerStatus->getBatteryChargePercent() >= 100) {
                power_state = charged;
            }
        } else {
-            power_state = discharging;
+            if (powerStatus->getBatteryChargePercent() > 5) {
+                power_state = discharging;
+            } else {
+                power_state = critical;
+            }
        }
        break;
    }
@@ -58,16 +62,33 @@ int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)

 int32_t StatusLEDModule::runOnce()
 {
+    my_interval = 1000;

    if (power_state == charging) {
        CHARGE_LED_state = !CHARGE_LED_state;
    } else if (power_state == charged) {
        CHARGE_LED_state = LED_STATE_ON;
+    } else if (power_state == critical) {
+        if (POWER_LED_starttime + 30000 < millis() && !doing_fast_blink) {
+            doing_fast_blink = true;
+            POWER_LED_starttime = millis();
+        }
+        if (doing_fast_blink) {
+            PAIRING_LED_state = LED_STATE_OFF;
+            CHARGE_LED_state = !CHARGE_LED_state;
+            my_interval = 250;
+            if (POWER_LED_starttime + 2000 < millis()) {
+                doing_fast_blink = false;
+            }
+        } else {
+            CHARGE_LED_state = LED_STATE_OFF;
+        }
+
    } else {
        CHARGE_LED_state = LED_STATE_OFF;
    }

-    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis() || doing_fast_blink) {
        PAIRING_LED_state = LED_STATE_OFF;
    } else if (ble_state == unpaired) {
        if (slowTrack) {
--- a/src/modules/StatusLEDModule.h
+++ b/src/modules/StatusLEDModule.h
@@ -31,8 +31,10 @@ class StatusLEDModule : private concurrency::OSThread
    bool PAIRING_LED_state = LED_STATE_OFF;

    uint32_t PAIRING_LED_starttime = 0;
+    uint32_t POWER_LED_starttime = 0;
+    bool doing_fast_blink = false;

-    enum PowerState { discharging, charging, charged };
+    enum PowerState { discharging, charging, charged, critical };

    PowerState power_state = discharging;

--- a/src/platform/portduino/PortduinoGlue.cpp
+++ b/src/platform/portduino/PortduinoGlue.cpp
@@ -279,7 +279,7 @@ void portduinoSetup()
        //      RAK6421-13300-S1:aabbcc123456:5ba85807d92138b7519cfb60460573af:3061e8d8
        // <model string>:mac address :<16 random unique bytes in hexidecimal> : crc32
        // crc32 is calculated on the eeprom string up to but not including the final colon
-        if (strlen(autoconf_product) < 6) {
+        if (strlen(autoconf_product) < 6 && portduino_config.i2cdev != "") {
            try {
                char *mac_start = nullptr;
                char *devID_start = nullptr;
@@ -867,4 +867,4 @@ void readGPIOFromYaml(YAML::Node sourceNode, pinMapping &destPin, int pinDefault
        destPin.line = destPin.pin;
        destPin.gpiochip = portduino_config.lora_default_gpiochip;
    }
-}
+}
--- a/userPrefs.jsonc
+++ b/userPrefs.jsonc
@@ -55,6 +55,7 @@
  // "USERPREFS_MQTT_TLS_ENABLED": "false",
  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
  // "USERPREFS_RINGTONE_NAG_SECS": "60",
+  // "USERPREFS_NODEINFO_REPLY_SUPPRESS_SECS": "43200",
  "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
  // "USERPREFS_NETWORK_IPV6_ENABLED": "1",
  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
--- a/variants/esp32s3/t-deck-pro/variant.h
+++ b/variants/esp32s3/t-deck-pro/variant.h
@@ -100,3 +100,5 @@
 #define MODEM_DTR 8
 #define MODEM_RX 10
 #define MODEM_TX 11
+
+#define HAS_PHYSICAL_KEYBOARD 1
--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -23,6 +23,7 @@
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
 #define USE_TFTDISPLAY 1
+#define HAS_PHYSICAL_KEYBOARD 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
--- a/variants/esp32s3/tlora-pager/variant.h
+++ b/variants/esp32s3/tlora-pager/variant.h
@@ -21,6 +21,7 @@
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
 #define USE_TFTDISPLAY 1
+#define HAS_PHYSICAL_KEYBOARD 1

 #define I2C_SDA SDA
 #define I2C_SCL SCL
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
@@ -54,6 +54,7 @@ extern "C" {
 #define LED_POWER red_LED_PIN
 #define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED
 #define green_LED_PIN 35
+#define PIN_LED2 green_LED_PIN
 #define LED_BLUE 37
 #define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED

--- a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp
@@ -41,3 +41,30 @@ void initVariant()
    pinMode(VDD_FLASH_EN, OUTPUT);
    digitalWrite(VDD_FLASH_EN, HIGH);
 }
+
+// called from main-nrf52.cpp during the cpuDeepSleep() function
+void variant_shutdown()
+{
+    // This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == PIN_GPS_EN || pin == ADC_CTRL || pin == PIN_BUTTON1 || pin == PIN_SPI_MISO || pin == PIN_SPI_MOSI ||
+            pin == PIN_SPI_SCK) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+
+    digitalWrite(PIN_GPS_EN, LOW);
+    digitalWrite(ADC_CTRL, LOW);
+    // digitalWrite(RTC_POWER, LOW);
+
+    nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+}
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
@@ -44,8 +44,10 @@ extern "C" {
 #define LED_BLUE -1
 #define LED_CHARGE (12)
 #define LED_PAIRING (7)
+#define PIN_LED2 LED_PAIRING

-#define LED_STATE_ON 1
+#define LED_STATE_ON HIGH
+#define LED_STATE_OFF LOW

 // USB power detection
 #define EXT_PWR_DETECT (13)
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h
@@ -90,16 +90,16 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define BUTTON_PIN (32 + 0) // P1.00

 // GPS
-#define PIN_GPS_TX (0 + 20) // P0.20 - This is data from the MCU
-#define PIN_GPS_RX (0 + 22) // P0.22 - This is data from the GNSS
+#define GPS_TX_PIN (0 + 20) // P0.20 - This is data from the MCU
+#define GPS_RX_PIN (0 + 22) // P0.22 - This is data from the GNSS

 #define PIN_GPS_EN (0 + 24) // P0.24
 #define GPS_UBLOX
 // define GPS_DEBUG

 // UART interfaces
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN

 #define PIN_SERIAL2_RX (0 + 6) // P0.06
 #define PIN_SERIAL2_TX (0 + 8) // P0.08
--- a/variants/nrf52840/nano-g2-ultra/variant.h
+++ b/variants/nrf52840/nano-g2-ultra/variant.h
@@ -132,13 +132,13 @@ External serial flash W25Q16JV_IQ
 #define GPS_L76K

 #define PIN_GPS_STANDBY (0 + 13) // An output to wake GPS, low means allow sleep, high means force wake STANDBY
-#define PIN_GPS_TX (0 + 10)      // This is for bits going TOWARDS the CPU
-#define PIN_GPS_RX (0 + 9)       // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (0 + 10)      // This is for bits going FROM the CPU
+#define GPS_RX_PIN (0 + 9)       // This is for bits going FROM the GPS

 // #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
--- a/variants/nrf52840/seeed_solar_node/variant.h
+++ b/variants/nrf52840/seeed_solar_node/variant.h
@@ -116,13 +116,13 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_TX D6 // 44
-#define PIN_GPS_RX D7 // 43
+#define GPS_TX_PIN D6 // 44
+#define GPS_RX_PIN D7 // 43
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_GPS_STANDBY D0
 #define GPS_EN D18 // P1.05
 #endif
--- a/variants/nrf52840/seeed_wio_tracker_L1/variant.h
+++ b/variants/nrf52840/seeed_wio_tracker_L1/variant.h
@@ -119,16 +119,14 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6 // P0.26
-#define PIN_GPS_TX D7
+#define GPS_TX_PIN D6 // P0.26 - This is data from the MCU
+#define GPS_RX_PIN D7 // P0.27 - This is data from the GNSS
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

-#define GPS_RX_PIN PIN_GPS_TX
-#define GPS_TX_PIN PIN_GPS_RX
 #define PIN_GPS_STANDBY D0

 // #define GPS_DEBUG
--- a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h
+++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h
@@ -129,16 +129,14 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6 // P0.26
-#define PIN_GPS_TX D7
+#define GPS_TX_PIN D6 // P0.26 - This is data from the MCU
+#define GPS_RX_PIN D7 // P0.27 - This is data from the GNSS
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

-#define GPS_RX_PIN PIN_GPS_TX
-#define GPS_TX_PIN PIN_GPS_RX
 #define PIN_GPS_STANDBY D0

 // #define GPS_DEBUG
--- a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h
+++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h
@@ -147,12 +147,12 @@ static const uint8_t SCK = PIN_SPI_SCK;
 */
 // GPS L76K
 #ifdef GPS_L76K
-#define PIN_GPS_TX D6
-#define PIN_GPS_RX D7
+#define GPS_TX_PIN D6 // This is data from the MCU
+#define GPS_RX_PIN D7 // This is data from the GNSS module
 #define HAS_GPS 1
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_TX PIN_GPS_TX
-#define PIN_SERIAL1_RX PIN_GPS_RX
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_GPS_STANDBY D0
 #else
 #define PIN_SERIAL1_RX (-1)
--- a/variants/rp2040/rp2040.ini
+++ b/variants/rp2040/rp2040.ini
@@ -2,12 +2,12 @@
 [rp2040_base]
 platform =
  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  ; For arduino-pico >= 5.4.4
 extends = arduino_base
 platform_packages =
  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip

 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -17,6 +17,7 @@ build_flags =
  -Isrc/platform/rp2xx0/hardware_rosc/include
  -Isrc/platform/rp2xx0/pico_sleep/include
  -D__PLAT_RP2040__
+  -D__FREERTOS=1
 #  -D _POSIX_THREADS
 build_src_filter = 
  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
--- a/variants/rp2350/rp2350.ini
+++ b/variants/rp2350/rp2350.ini
@@ -2,12 +2,12 @@
 [rp2350_base]
 platform =
  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  ; For arduino-pico >= 5.4.4
 extends = arduino_base
 platform_packages =
  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip

 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -15,6 +15,7 @@ build_flags =
  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
  -Isrc/platform/rp2xx0
  -D__PLAT_RP2350__
+  -D__FREERTOS=1
 build_src_filter = 
  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
Author	SHA1	Message	Date
Ben Meadors	717249327a	Revert "Upgrade all esp32 targets to NimBLE 2.X (#9003 )" This reverts commit `40f1f91c0d`.	2025-12-30 13:51:31 -06:00
github-actions[bot]	ac571d5dd2	Upgrade trunk (#9121 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-30 07:10:36 -06:00
renovate[bot]	ef30fd850d	Update meshtastic/device-ui digest to 7656d49 (#9111 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-29 19:09:44 +01:00
renovate[bot]	b9a0015149	chore(deps): update meshtastic/device-ui digest to d234bd9 (#9108 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-29 06:50:12 -06:00
github-actions[bot]	9673cfb0b2	Upgrade trunk (#9106 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-29 06:03:03 -06:00
renovate[bot]	757f7b68d6	Update meshtastic/device-ui digest to caff403 (#9104 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-29 13:35:31 +11:00
Jason P	5510dae8d3	Implement HAS_PHYSICAL_KEYBOARD for devices with physical keyboards (#9071 ) - Implement HAS_PHYSICAL_KEYBOARD for devices with physical keyboards - Add HAS_PHYSICAL_KEYBOARD to variant.h for: - TDeck - TLora Pager - TDeck Pro	2025-12-27 06:53:55 -06:00
Tom	52fd362720	Fix gps pin defs for various NRF variants. (#9034 ) * fix on nrf52_promicro * try fix for GPS issue * fix GPS pin assignment in variant.h * cleared up some comments and confirmed pinouts from schematics --------- Co-authored-by: macvenez <macvenez@gmail.com>	2025-12-27 06:50:07 -06:00
github-actions[bot]	33e1f58f6e	Upgrade trunk (#9076 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-26 17:45:57 -06:00
Jonathan Bennett	9dc7ef612e	In autoconf, don't probe Wire unless i2c device is set (#9081 ) Found another bit of code that crashes my desktop, by probing the wrong i2c bus.	2025-12-26 14:33:17 -06:00
github-actions[bot]	b2c82bdc41	Upgrade trunk (#9072 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-25 06:34:38 -06:00
Jonathan Bennett	54a928f47f	M6 shutdown and LEDs work (#9065 ) Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-24 07:48:14 -06:00
github-actions[bot]	33f18659c8	Upgrade trunk (#9067 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-24 05:20:22 -06:00
github-actions[bot]	3a7093a973	Upgrade trunk (#9047 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-23 18:55:54 -06:00
renovate[bot]	a4f6f4515a	Update meshtastic-esp8266-oled-ssd1306 digest to b34c681 (#9062 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-23 18:55:37 -06:00
Jonathan Bennett	d609d05698	In statusLEDModule, also detect isCharging (#9050 )	2025-12-23 07:48:55 -06:00
Ben Meadors	83c6161ac6	Revert "Automated version bumps (#9025 )" This reverts commit `1021d967da`.	2025-12-20 14:10:02 -06:00
Ben Meadors	d93d68d31e	Fix -ota.zip in manifest and build output	2025-12-20 14:09:05 -06:00
github-actions[bot]	1021d967da	Automated version bumps (#9025 ) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-12-20 09:50:11 -06:00
Ben Meadors	217abc4c10	fmt	2025-12-20 07:05:47 -06:00
Austin	e6af68bd14	Actions: Compact manifest job output summary (#8957 )	2025-12-20 07:04:52 -06:00
Jason P	530f0135ee	Macro guard heap_caps_malloc_extmem_enable from SENSECAP_INDICATOR (#9007 )	2025-12-20 07:04:07 -06:00
korbinianbauer	208a873c4c	CLIENT_BASE: Act like ROUTER_LATE for fav'd nodes, instead of like ROUTER (#8567 ) * Client_Base - Dont rebroadcast in early (Router) window Removed early rebroadcast check for CLIENT_BASE role. * Client_Base - Clamp rebroadcast to late (Router_Late) window on dupe * Only clamp to Router_Late window if packet from fav'd node --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-20 07:03:53 -06:00
Austin	f57eb6f27d	rp2xx0: Update to arduino-pico 5.4.4 (#8979 )	2025-12-20 07:03:41 -06:00
Jason P	155cdf9f9d	Add Rebooting to DFU mode notification as a simple pop-up (#8970 ) * Add DFU notification as a simple pop-up * Add safe conditional of IF_SCREEN * Forgot #if HAS_SCREEN	2025-12-20 07:03:10 -06:00
Ben Meadors	661f49ad7a	For our first position send on boot, validate that we have received a fresh position (#9023 )	2025-12-20 07:01:00 -06:00
Ben Meadors	31e55d0b66	Be more judicious about responding to want_response in existing meshes (#9014 ) * Be more judicious about sending want_response in existing meshes and responding to nodes we already heard from * Turns out we don't actually use this	2025-12-19 13:56:10 -06:00
github-actions[bot]	85aba3a4f7	Upgrade trunk (#9011 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-19 05:36:16 -06:00
Jonathan Bennett	5262233b2d	More blinkenlights work for Thinknode-m3 (#8940 ) * More blinkenlights work for Thinknode-m3 * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-12-17 19:52:55 -06:00
Ben Meadors	40f1f91c0d	Upgrade all esp32 targets to NimBLE 2.X (#9003 ) * Upgrade all esp32 targets to NimBLE 2.X * Remove guard	2025-12-17 10:40:33 -06:00
github-actions[bot]	269dee7a2d	Upgrade trunk (#9000 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-17 06:07:19 -06:00
Ben Meadors	8e0547e76d	Implement Long Turbo preset (#8985 ) * Implement Long_Turbo preset * Oops * Start to DRY up menu handler by actually using OO concepts instead of jank separate arrays * Move the implementation back into the method * Dummy comment * Listen to copilot feedback and prevent dangling pointer * Static and optional	2025-12-16 11:42:13 -06:00
github-actions[bot]	8a48321555	Upgrade trunk (#8989 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-16 06:17:03 -06:00
renovate[bot]	aa8bb6c6f1	Update meshtastic/device-ui digest to 862ed04 (#8980 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-15 16:52:23 -06:00
github-actions[bot]	1952982896	Update protobufs (#8982 ) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-12-15 16:51:59 -06:00
renovate[bot]	de2b9632bb	Update GitHub Artifact Actions (#8954 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-12-15 06:52:40 -06:00
github-actions[bot]	c2b7dc2641	Upgrade trunk (#8976 ) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-12-15 06:47:00 -06:00