Merge branch 'develop' into merge-master-fix

.github/workflows/first_time_contributor.yml

@@ -22,7 +22,7 @@ jobs:
             ### @{fc-author}, Welcome to Meshtastic! :wave:
 
             Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
+            to get logs is the "Open Serial Monitor" button on the (Web Flasher](https://flasher.meshtastic.org).
 
             If you have ideas for features, note that we often debate big ideas
             in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)

.github/workflows/main_matrix.yml

@@ -8,9 +8,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       - version.properties
@@ -20,9 +18,7 @@ on:
     branches:
       - master
       - develop
-      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
-      - feature/*
     paths-ignore:
       - "**.md"
       #- "**.yml"

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.4.0
+        uses: dorny/test-reporter@v2.3.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.7.x            | :white_check_mark: |
-| <= 2.6.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

bin/build-esp32.sh

@@ -38,4 +38,4 @@ cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-nrf52.sh

@@ -49,4 +49,4 @@ if (echo $1 | grep -q "rak4631"); then
 fi
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-rp2xx0.sh

@@ -30,4 +30,4 @@ echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/build-stm32wl.sh

@@ -30,4 +30,4 @@ echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -1,14 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  SX126X_MAX_POWER: 22

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.18" date="2026-01-02">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
-    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -2,12 +2,11 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join
+from os.path import join, basename, isfile
 import subprocess
 import json
 import re
 from datetime import datetime
-from typing import Dict
 
 from readprops import readProps
 
@@ -15,47 +14,8 @@ Import("env")
 platform = env.PioPlatform()
 progname = env.get("PROGNAME")
 lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
-manifest_ran = False
-
-def infer_architecture(board_cfg):
-    try:
-        mcu = board_cfg.get("build.mcu") if board_cfg else None
-    except KeyError:
-        mcu = None
-    except Exception:
-        mcu = None
-    if not mcu:
-        return None
-    mcu_l = str(mcu).lower()
-    if "esp32s3" in mcu_l:
-        return "esp32-s3"
-    if "esp32c6" in mcu_l:
-        return "esp32-c6"
-    if "esp32c3" in mcu_l:
-        return "esp32-c3"
-    if "esp32" in mcu_l:
-        return "esp32"
-    if "rp2040" in mcu_l:
-        return "rp2040"
-    if "rp2350" in mcu_l:
-        return "rp2350"
-    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
-        return "nrf52840"
-    if "stm32" in mcu_l:
-        return "stm32"
-    return None
 
 def manifest_gather(source, target, env):
-    global manifest_ran
-    if manifest_ran:
-        return
-    # Skip manifest generation if we cannot determine architecture (host/native builds)
-    board_arch = infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
-        manifest_ran = True
-        return
-    manifest_ran = True
     out = []
     board_platform = env.BoardConfig().get("platform")
     needs_ota_suffix = board_platform == "nordicnrf52"
@@ -87,39 +47,14 @@ def manifest_gather(source, target, env):
     manifest_write(out, env)
 
 def manifest_write(files, env):
-    # Defensive: also skip manifest writing if we cannot determine architecture
-    def get_project_option(name):
-        try:
-            return env.GetProjectOption(name)
-        except Exception:
-            return None
-
-    def get_project_option_any(names):
-        for name in names:
-            val = get_project_option(name)
-            if val is not None:
-                return val
-        return None
-
-    def as_bool(val):
-        return str(val).strip().lower() in ("1", "true", "yes", "on")
-
-    def as_int(val):
-        try:
-            return int(str(val), 10)
-        except (TypeError, ValueError):
-            return None
-
-    def as_list(val):
-        return [item.strip() for item in str(val).split(",") if item.strip()]
-
     manifest = {
         "version": verObj["long"],
         "build_epoch": build_epoch,
-        "platformioTarget": env.get("PIOENV"),
+        "board": env.get("PIOENV"),
         "mcu": env.get("BOARD_MCU"),
         "repo": repo_owner,
         "files": files,
+        "part": None,
         "has_mui": False,
         "has_inkhud": False,
     }
@@ -134,51 +69,6 @@ def manifest_write(files, env):
     if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
         manifest["has_inkhud"] = True
 
-    pioenv = env.get("PIOENV")
-    device_meta = {}
-    device_meta_fields = [
-        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
-        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
-        ("architecture", ["custom_meshtastic_architecture"], str),
-        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
-        ("displayName", ["custom_meshtastic_display_name"], str),
-        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
-        ("images", ["custom_meshtastic_images"], as_list),
-        ("tags", ["custom_meshtastic_tags"], as_list),
-        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
-        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
-        ("url", ["custom_meshtastic_url"], str),
-        ("key", ["custom_meshtastic_key"], str),
-        ("variant", ["custom_meshtastic_variant"], str),
-    ]
-
-
-    for manifest_key, option_keys, caster in device_meta_fields:
-        raw_val = get_project_option_any(option_keys)
-        if raw_val is None:
-            continue
-        parsed = caster(raw_val) if callable(caster) else raw_val
-        if parsed is not None and parsed != "":
-            device_meta[manifest_key] = parsed
-
-    # Determine architecture once; if we can't infer it, skip manifest generation
-    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
-    if not board_arch:
-        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
-        return
-
-    device_meta["architecture"] = board_arch
-
-    # Always set requiresDfu: true for nrf52840 targets
-    if board_arch == "nrf52840":
-        device_meta["requiresDfu"] = True
-
-    device_meta.setdefault("displayName", pioenv)
-    device_meta.setdefault("activelySupported", False)
-
-    if device_meta:
-        manifest.update(device_meta)
-
     # Write the manifest to the build directory
     with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
         json.dump(manifest, f, indent=2)
@@ -276,12 +166,8 @@ def load_boot_logo(source, target, env):
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
     env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
 
-board_arch = infer_architecture(env.BoardConfig())
-should_skip_manifest = board_arch is None
-
-# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
-mtjson_deps = [] if should_skip_manifest else ["buildprog"]
-if not should_skip_manifest and platform.name == "espressif32":
+mtjson_deps = ["buildprog"]
+if platform.name == "espressif32":
     # Build littlefs image as part of mtjson target
     # Equivalent to `pio run -t buildfs`
     target_lfs = env.DataToBin(
@@ -289,27 +175,11 @@ if not should_skip_manifest and platform.name == "espressif32":
     )
     mtjson_deps.append(target_lfs)
 
-if should_skip_manifest:
-    def skip_manifest(source, target, env):
-        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
-
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[skip_manifest],
-        title="Meshtastic Manifest (skipped)",
-        description="mtjson generation is skipped for native environments",
-        always_build=True,
-    )
-else:
-    env.AddCustomTarget(
-        name="mtjson",
-        dependencies=mtjson_deps,
-        actions=[manifest_gather],
-        title="Meshtastic Manifest",
-        description="Generating Meshtastic manifest JSON + Checksums",
-        always_build=True,
-    )
-
-    # Run manifest generation as part of the default build pipeline for non-native builds.
-    env.Default("mtjson")
+env.AddCustomTarget(
+    name="mtjson",
+    dependencies=mtjson_deps,
+    actions=[manifest_gather],
+    title="Meshtastic Manifest",
+    description="Generating Meshtastic manifest JSON + Checksums",
+    always_build=False,
+)

bin/readprops.py

@@ -18,9 +18,8 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
             .decode("utf-8")
             .strip()
         )

boards/t-beam-1w.json

@@ -1,50 +0,0 @@
-{
-    "build": {
-        "arduino": {
-            "ldscript": "esp32s3_out.ld",
-            "memory_type": "qio_opi"
-        },
-        "core": "esp32",
-        "extra_flags": [
-            "-DBOARD_HAS_PSRAM",
-            "-DLILYGO_TBEAM_1W",
-            "-DARDUINO_USB_CDC_ON_BOOT=1",
-            "-DARDUINO_USB_MODE=0",
-            "-DARDUINO_RUNNING_CORE=1",
-            "-DARDUINO_EVENT_RUNNING_CORE=1"
-        ],
-        "f_cpu": "240000000L",
-        "f_flash": "80000000L",
-        "flash_mode": "qio",
-        "psram_type": "opi",
-        "hwids": [
-            [
-                "0x303A",
-                "0x1001"
-            ]
-        ],
-        "mcu": "esp32s3",
-        "variant": "t-beam-1w"
-    },
-    "connectivity": [
-        "wifi",
-        "bluetooth",
-        "lora"
-    ],
-    "debug": {
-        "openocd_target": "esp32s3.cfg"
-    },
-    "frameworks": [
-        "arduino"
-    ],
-    "name": "LilyGo TBeam-1W",
-    "upload": {
-        "flash_size": "16MB",
-        "maximum_ram_size": 327680,
-        "maximum_size": 16777216,
-        "require_upload_port": true,
-        "speed": 921600
-    },
-    "url": "http://www.lilygo.cn/",
-    "vendor": "LilyGo"
-}

debian/changelog

@@ -1,9 +1,3 @@
-meshtasticd (2.7.18.0) unstable; urgency=medium
-
-  * Version 2.7.18
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 02 Jan 2026 12:45:36 +0000
-
 meshtasticd (2.7.17.0) unstable; urgency=medium
 
   * Version 2.7.17

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/a8e2f947f7abaf0c5ac8e6dd189a22156335beaa.zip
+	https://github.com/meshtastic/device-ui/archive/940ba8570f59c59c3508643f4d72840de716ce20.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/buzz/BuzzerFeedbackThread.cpp

@@ -22,19 +22,12 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
-#ifdef INPUTDRIVER_ENCODER_TYPE
-    case INPUT_BROKER_SELECT:
-    case INPUT_BROKER_SELECT_LONG:
-        playClick();
-        break;
-#else
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
     case INPUT_BROKER_SELECT:
     case INPUT_BROKER_SELECT_LONG:
-        playBeep();
+        playBeep(); // Confirmation feedback
         break;
-#endif
 
     case INPUT_BROKER_UP:
     case INPUT_BROKER_UP_LONG:
@@ -65,4 +58,4 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     }
 
     return 0; // Allow other handlers to process the event
-}
+}

src/buzz/buzz.cpp

@@ -65,7 +65,7 @@ void playTones(const ToneDuration *tone_durations, int size)
 
 void playBeep()
 {
-    ToneDuration melody[] = {{NOTE_B3, DURATION_1_16}};
+    ToneDuration melody[] = {{NOTE_B3, DURATION_1_8}};
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
@@ -113,14 +113,7 @@ void playShutdownMelody()
 void playChirp()
 {
     // A short, friendly "chirp" sound for key presses
-    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Short AS3 note
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
-void playClick()
-{
-    // A very short "click" sound with minimum delay; ideal for rotary encoder events
-    ToneDuration melody[] = {{NOTE_AS3, 1}}; // Very Short AS3
+    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Very short AS3 note
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 

src/buzz/buzz.h

@@ -9,7 +9,6 @@ void playGPSDisableBeep();
 void playComboTune();
 void playBoop();
 void playChirp();
-void playClick();
 void playLongPressLeadUp();
 bool playNextLeadUpNote();  // Play the next note in the lead-up sequence
 void resetLeadUpSequence(); // Reset the lead-up sequence to start from beginning

src/configuration.h

@@ -444,18 +444,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #endif
 
-// BME680 BSEC2 support detection
-#if !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
-#if defined(RAK_4631) || defined(TBEAM_V10)
-
-#define MESHTASTIC_BME680_BSEC2_SUPPORTED 1
-#define MESHTASTIC_BME680_HEADER <bsec2.h>
-#else
-#define MESHTASTIC_BME680_BSEC2_SUPPORTED 0
-#define MESHTASTIC_BME680_HEADER <Adafruit_BME680.h>
-#endif // defined(RAK_4631)
-#endif // !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
-
 // -----------------------------------------------------------------------------
 // Global switches to turn off features for a minimized build
 // -----------------------------------------------------------------------------

src/detect/ScanI2CTwoWire.cpp

@@ -487,7 +487,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
             case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xA0 | 0x12), 1);
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
                     type = TSL2591;
                     logFoundDevice("TSL25911", (uint8_t)addr.address);

src/graphics/draw/MenuHandler.h

@@ -128,28 +128,7 @@ template <typename T> struct MenuOption {
     MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
 };
 
-struct ScreenColor {
-    uint8_t r;
-    uint8_t g;
-    uint8_t b;
-    bool useVariant;
-
-    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
-        : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
-    {
-    }
-};
-
 using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
-using LoraRegionOption = MenuOption<meshtastic_Config_LoRaConfig_RegionCode>;
-using TimezoneOption = MenuOption<const char *>;
-using CompassOption = MenuOption<meshtastic_CompassMode>;
-using ScreenColorOption = MenuOption<ScreenColor>;
-using GPSToggleOption = MenuOption<meshtastic_Config_PositionConfig_GpsMode>;
-using GPSFormatOption = MenuOption<meshtastic_DeviceUIConfig_GpsCoordinateFormat>;
-using NodeNameOption = MenuOption<bool>;
-using PositionMenuOption = MenuOption<int>;
-using ClockFaceOption = MenuOption<bool>;
 
 } // namespace graphics
 #endif

src/mesh/FloodingRouter.cpp

@@ -4,7 +4,6 @@
 #include "configuration.h"
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"
-#include "modules/TextMessageModule.h"
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
 #include "modules/TraceRouteModule.h"
 #endif
@@ -36,10 +35,6 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         return true; // we handled it, so stop processing
     }
 
-    if (!seenRecently && !wasUpgraded && textMessageModule) {
-        seenRecently = textMessageModule->recentlySeen(p->id);
-    }
-
     if (seenRecently) {
         printPacket("Ignore dupe incoming msg", p);
         rxDupe++;

src/mesh/RadioInterface.cpp

@@ -246,8 +246,7 @@ uint32_t RadioInterface::getPacketTime(const meshtastic_MeshPacket *p, bool rece
 /** The delay to use for retransmitting dropped packets */
 uint32_t RadioInterface::getRetransmissionMsec(const meshtastic_MeshPacket *p)
 {
-    size_t numbytes =p->which_payload_variant == meshtastic_MeshPacket_decoded_tag ? 
-      pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded) : p->encrypted.size+MESHTASTIC_HEADER_LENGTH;
+    size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded);
     uint32_t packetAirtime = getPacketTime(numbytes + sizeof(PacketHeader));
     // Make sure enough time has elapsed for this packet to be sent and an ACK is received.
     // LOG_DEBUG("Waiting for flooding message with airtime %d and slotTime is %d", packetAirtime, slotTimeMsec);
@@ -521,10 +520,6 @@ void RadioInterface::applyModemConfig()
                 sf = 12;
                 break;
             }
-            if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
-                cr = loraConfig.coding_rate;
-                LOG_INFO("Using custom Coding Rate %u", cr);
-            }
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;

src/mesh/Router.cpp

@@ -113,7 +113,7 @@ bool Router::shouldDecrementHopLimit(const meshtastic_MeshPacket *p)
 
         // Check 3: role check (moderate cost - multiple comparisons)
         if (!IS_ONE_OF(node->user.role, meshtastic_Config_DeviceConfig_Role_ROUTER,
-                       meshtastic_Config_DeviceConfig_Role_ROUTER_LATE, meshtastic_Config_DeviceConfig_Role_CLIENT_BASE)) {
+                       meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)) {
             continue;
         }
 

src/mesh/SX126xInterface.cpp

@@ -53,26 +53,13 @@ template <typename T> bool SX126xInterface<T>::init()
 #endif
 
 #if defined(USE_GC1109_PA)
-    // GC1109 FEM chip initialization
-    // See variant.h for full pin mapping and control logic documentation
-
-    // VFEM_Ctrl (LORA_PA_POWER): Power enable for GC1109 LDO (always on)
     pinMode(LORA_PA_POWER, OUTPUT);
     digitalWrite(LORA_PA_POWER, HIGH);
 
-    // CSD (LORA_PA_EN): Chip enable - must be HIGH to enable GC1109 for both RX and TX
     pinMode(LORA_PA_EN, OUTPUT);
-    digitalWrite(LORA_PA_EN, HIGH);
-
-    // CPS (LORA_PA_TX_EN): PA mode select - HIGH enables full PA during TX, LOW for RX (don't care)
-    // Note: TX/RX path switching (CTX) is handled by DIO2 via SX126X_DIO2_AS_RF_SWITCH
+    digitalWrite(LORA_PA_EN, LOW);
     pinMode(LORA_PA_TX_EN, OUTPUT);
-    digitalWrite(LORA_PA_TX_EN, LOW); // Start in RX-ready state
-#endif
-
-#ifdef RF95_FAN_EN
-    digitalWrite(RF95_FAN_EN, HIGH);
-    pinMode(RF95_FAN_EN, OUTPUT);
+    digitalWrite(LORA_PA_TX_EN, LOW);
 #endif
 
 #if ARCH_PORTDUINO
@@ -98,13 +85,6 @@ template <typename T> bool SX126xInterface<T>::init()
         power = -9;
 
     int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength, tcxoVoltage, useRegulatorLDO);
-
-#ifdef SX126X_PA_RAMP_US
-    // Set custom PA ramp time for boards requiring longer stabilization (e.g., T-Beam 1W needs >800us)
-    if (res == RADIOLIB_ERR_NONE) {
-        lora.setPaRampTime(SX126X_PA_RAMP_US);
-    }
-#endif
     // \todo Display actual typename of the adapter, not just `SX126x`
     LOG_INFO("SX126x init result %d", res);
     if (res == RADIOLIB_ERR_CHIP_NOT_FOUND || res == RADIOLIB_ERR_SPI_CMD_FAILED)
@@ -385,13 +365,13 @@ template <typename T> bool SX126xInterface<T>::sleep()
     return true;
 }
 
-/** Control PA mode for GC1109 FEM - CPS pin selects full PA (txon=true) or bypass mode (txon=false) */
+/** Some boards require GPIO control of tx vs rx paths */
 template <typename T> void SX126xInterface<T>::setTransmitEnable(bool txon)
 {
 #if defined(USE_GC1109_PA)
-    digitalWrite(LORA_PA_POWER, HIGH);  // Ensure LDO is on
-    digitalWrite(LORA_PA_EN, HIGH);     // CSD=1: Chip enabled
-    digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);  // CPS: 1=full PA, 0=bypass (for RX, CPS is don't care)
+    digitalWrite(LORA_PA_POWER, HIGH);
+    digitalWrite(LORA_PA_EN, HIGH);
+    digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);
 #endif
 }
 

src/modules/SystemCommandsModule.cpp

@@ -45,9 +45,9 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     // Mute
     case INPUT_BROKER_MSG_MUTE_TOGGLE:
         if (moduleConfig.external_notification.enabled && externalNotificationModule) {
-            externalNotificationModule->setMute(!externalNotificationModule->getMute());
+            externalNotificationModule->setMute(externalNotificationModule->getMute());
             IF_SCREEN(if (!externalNotificationModule->getMute()) externalNotificationModule->stopNow(); screen->showSimpleBanner(
-                externalNotificationModule->getMute() ? "Notifications\nDisabled" : "Notifications\nEnabled", 3000);)
+                externalNotificationModule->getMute() ? "Notifications\nEnabled" : "Notifications\nDisabled", 3000);)
         }
         return 0;
     // Bluetooth

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -53,7 +53,7 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
 #include "Sensor/LTR390UVSensor.h"
 #endif
 
-#if __has_include(MESHTASTIC_BME680_HEADER)
+#if __has_include(<bsec2.h>)
 #include "Sensor/BME680Sensor.h"
 #endif
 
@@ -214,7 +214,7 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
 #if __has_include(<Adafruit_LTR390.h>)
     addSensor<LTR390UVSensor>(i2cScanner, ScanI2C::DeviceType::LTR390UV);
 #endif
-#if __has_include(MESHTASTIC_BME680_HEADER)
+#if __has_include(<bsec2.h>)
     addSensor<BME680Sensor>(i2cScanner, ScanI2C::DeviceType::BME_680);
 #endif
 #if __has_include(<Adafruit_BMP280.h>)

src/modules/Telemetry/HealthTelemetry.cpp

@@ -136,12 +136,12 @@ void HealthTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *
     display->drawString(x, y += _fontHeight(FONT_SMALL), tempStr);
     if (lastMeasurement.variant.health_metrics.has_heart_bpm) {
         char heartStr[32];
-        snprintf(heartStr, sizeof(heartStr), "Heart Rate: %u bpm", lastMeasurement.variant.health_metrics.heart_bpm);
+        snprintf(heartStr, sizeof(heartStr), "Heart Rate: %.0f bpm", lastMeasurement.variant.health_metrics.heart_bpm);
         display->drawString(x, y += _fontHeight(FONT_SMALL), heartStr);
     }
     if (lastMeasurement.variant.health_metrics.has_spO2) {
         char spo2Str[32];
-        snprintf(spo2Str, sizeof(spo2Str), "spO2: %u %%", lastMeasurement.variant.health_metrics.spO2);
+        snprintf(spo2Str, sizeof(spo2Str), "spO2: %.0f %%", lastMeasurement.variant.health_metrics.spO2);
         display->drawString(x, y += _fontHeight(FONT_SMALL), spo2Str);
     }
 }

src/modules/Telemetry/Sensor/BME680Sensor.cpp

@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(MESHTASTIC_BME680_HEADER)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<bsec2.h>)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "BME680Sensor.h"
@@ -10,7 +10,6 @@
 
 BME680Sensor::BME680Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_BME680, "BME680") {}
 
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 int32_t BME680Sensor::runOnce()
 {
     if (!bme680.run()) {
@@ -18,13 +17,10 @@ int32_t BME680Sensor::runOnce()
     }
     return 35;
 }
-#endif // defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
 
 bool BME680Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
 {
     status = 0;
-
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     if (!bme680.begin(dev->address.address, *bus))
         checkStatus("begin");
 
@@ -46,25 +42,12 @@ bool BME680Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
     if (status == 0)
         LOG_DEBUG("BME680Sensor::runOnce: bme680.status %d", bme680.status);
 
-#else
-    bme680 = makeBME680(bus);
-
-    if (!bme680->begin(dev->address.address)) {
-        LOG_ERROR("Init sensor: %s failed at begin()", sensorName);
-        return status;
-    }
-
-    status = 1;
-
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
-
     initI2CSensor();
     return status;
 }
 
 bool BME680Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     if (bme680.getData(BSEC_OUTPUT_RAW_PRESSURE).signal == 0)
         return false;
 
@@ -82,27 +65,9 @@ bool BME680Sensor::getMetrics(meshtastic_Telemetry *measurement)
     // Check if we need to save state to filesystem (every STATE_SAVE_PERIOD ms)
     measurement->variant.environment_metrics.iaq = bme680.getData(BSEC_OUTPUT_IAQ).signal;
     updateState();
-#else
-    if (!bme680->performReading()) {
-        LOG_ERROR("BME680Sensor::getMetrics: performReading failed");
-        return false;
-    }
-
-    measurement->variant.environment_metrics.has_temperature = true;
-    measurement->variant.environment_metrics.has_relative_humidity = true;
-    measurement->variant.environment_metrics.has_barometric_pressure = true;
-    measurement->variant.environment_metrics.has_gas_resistance = true;
-
-    measurement->variant.environment_metrics.temperature = bme680->readTemperature();
-    measurement->variant.environment_metrics.relative_humidity = bme680->readHumidity();
-    measurement->variant.environment_metrics.barometric_pressure = bme680->readPressure() / 100.0F;
-    measurement->variant.environment_metrics.gas_resistance = bme680->readGas() / 1000.0;
-
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
     return true;
 }
 
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 void BME680Sensor::loadState()
 {
 #ifdef FSCom
@@ -179,6 +144,5 @@ void BME680Sensor::checkStatus(const char *functionName)
     else if (bme680.sensor.status > BME68X_OK)
         LOG_WARN("%s BME68X code: %d", functionName, bme680.sensor.status);
 }
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
 #endif

src/modules/Telemetry/Sensor/BME680Sensor.h

@@ -1,40 +1,23 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(MESHTASTIC_BME680_HEADER)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<bsec2.h>)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
-
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
-#include <bme68xLibrary.h>
 #include <bsec2.h>
-#else
-#include <Adafruit_BME680.h>
-#include <memory>
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
 #define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // That's 6 hours worth of millis()
 
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 const uint8_t bsec_config[] = {
 #include "config/bme680/bme680_iaq_33v_3s_4d/bsec_iaq.txt"
 };
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
+
 class BME680Sensor : public TelemetrySensor
 {
   private:
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     Bsec2 bme680;
-#else
-    using BME680Ptr = std::unique_ptr<Adafruit_BME680>;
-
-    static BME680Ptr makeBME680(TwoWire *bus) { return std::make_unique<Adafruit_BME680>(bus); }
-
-    BME680Ptr bme680;
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
   protected:
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     const char *bsecConfigFileName = "/prefs/bsec.dat";
     uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
     uint8_t accuracy = 0;
@@ -51,13 +34,10 @@ class BME680Sensor : public TelemetrySensor
     void loadState();
     void updateState();
     void checkStatus(const char *functionName);
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
   public:
     BME680Sensor();
-#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     virtual int32_t runOnce() override;
-#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
     virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
 };

src/modules/TextMessageModule.cpp

@@ -17,9 +17,6 @@ ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp
     auto &p = mp.decoded;
     LOG_INFO("Received text msg from=0x%0x, id=0x%x, msg=%.*s", mp.from, mp.id, p.payload.size, p.payload.bytes);
 #endif
-    // add packet ID to the rolling list of packets
-    textPacketList[textPacketListIndex] = mp.id;
-    textPacketListIndex = (textPacketListIndex + 1) % TEXT_PACKET_LIST_SIZE;
 
     // We only store/display messages destined for us.
     devicestate.rx_text_message = mp;
@@ -50,13 +47,3 @@ bool TextMessageModule::wantPacket(const meshtastic_MeshPacket *p)
 {
     return MeshService::isTextPayload(p);
 }
-
-bool TextMessageModule::recentlySeen(uint32_t id)
-{
-    for (size_t i = 0; i < TEXT_PACKET_LIST_SIZE; i++) {
-        if (textPacketList[i] != 0 && textPacketList[i] == id) {
-            return true;
-        }
-    }
-    return false;
-}

src/modules/TextMessageModule.h

@@ -1,7 +1,6 @@
 #pragma once
 #include "Observer.h"
 #include "SinglePortModule.h"
-#define TEXT_PACKET_LIST_SIZE 50
 
 /**
  * Text message handling for Meshtastic.
@@ -20,8 +19,6 @@ class TextMessageModule : public SinglePortModule, public Observable<const mesht
      */
     TextMessageModule() : SinglePortModule("text", meshtastic_PortNum_TEXT_MESSAGE_APP) {}
 
-    bool recentlySeen(uint32_t id);
-
   protected:
     /** Called to handle a particular incoming message
      *
@@ -30,10 +27,6 @@ class TextMessageModule : public SinglePortModule, public Observable<const mesht
      */
     virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
     virtual bool wantPacket(const meshtastic_MeshPacket *p) override;
-
-  private:
-    uint32_t textPacketList[TEXT_PACKET_LIST_SIZE] = {0};
-    size_t textPacketListIndex = 0;
 };
 
 extern TextMessageModule *textMessageModule;

src/platform/portduino/PortduinoGlue.cpp

@@ -366,14 +366,6 @@ void portduinoSetup()
                         cleanupNameForAutoconf("lora-hat-" + std::string(hat_vendor) + "-" + autoconf_product + ".yaml");
                 } else if (found_ch341) {
                     product_config = cleanupNameForAutoconf("lora-usb-" + std::string(autoconf_product) + ".yaml");
-                    // look for more data after the null terminator
-                    size_t len = strlen(autoconf_product);
-                    if (len < 74) {
-                        memcpy(portduino_config.device_id, autoconf_product + len + 1, 16);
-                        if (!memfll(portduino_config.device_id, '\0', 16) && !memfll(portduino_config.device_id, 0xff, 16)) {
-                            portduino_config.has_device_id = true;
-                        }
-                    }
                 }
 
                 // Don't try to automatically find config for a device with RAK eeprom.

src/platform/portduino/USBHal.h

@@ -64,7 +64,7 @@ class Ch341Hal : public RadioLibHal
     void getProductString(char *_product_string, size_t len)
     {
         len = len > 95 ? 95 : len;
-        memcpy(_product_string, pinedio.product_string, len);
+        strncpy(_product_string, pinedio.product_string, len);
     }
 
     void init() override {}

variants/esp32/diy/dr-dev/platformio.ini

@@ -1,12 +1,5 @@
 ; Port to Disaster Radio's ESP32-v3 Dev Board
 [env:meshtastic-dr-dev]
-custom_meshtastic_hw_model = 41
-custom_meshtastic_hw_model_slug = DR_DEV
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = DR-DEV
-custom_meshtastic_tags = DIY
-
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_level = extra

variants/esp32/diy/hydra/platformio.ini

@@ -1,13 +1,5 @@
 ; Hydra - Meshtastic DIY v1 hardware with some specific changes
 [env:hydra]
-custom_meshtastic_hw_model = 39
-custom_meshtastic_hw_model_slug = HYDRA
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Hydra
-custom_meshtastic_tags = DIY
-
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/diy/v1/platformio.ini

@@ -1,14 +1,5 @@
 ; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
 [env:meshtastic-diy-v1]
-custom_meshtastic_hw_model = 39
-custom_meshtastic_hw_model_slug = DIY_V1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = DIY V1
-custom_meshtastic_images = diy.svg
-custom_meshtastic_tags = DIY
-
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_check = true

variants/esp32/esp32-common.ini

@@ -38,6 +38,7 @@ build_flags =
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
@@ -60,11 +61,11 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
+  h2zero/NimBLE-Arduino@2.3.7
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32/esp32.ini

@@ -5,4 +5,4 @@ extends = esp32_common
 custom_esp32_kind = esp32
 
 build_flags =
-  ${esp32_common.build_flags}
+  ${esp32_common.build_flags}

variants/esp32/heltec_v1/platformio.ini

@@ -1,11 +1,4 @@
 [env:heltec-v1]
-custom_meshtastic_hw_model = 11
-custom_meshtastic_hw_model_slug = HELTEC_V1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = Heltec V1
-custom_meshtastic_tags = Heltec
-
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
 board_level = extra

variants/esp32/heltec_v2.1/platformio.ini

@@ -1,11 +1,4 @@
 [env:heltec-v2_1]
-custom_meshtastic_hw_model = 10
-custom_meshtastic_hw_model_slug = HELTEC_V2_1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = Heltec V2.1
-custom_meshtastic_tags = Heltec
-
 board_level = extra
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base

variants/esp32/heltec_v2/platformio.ini

@@ -1,11 +1,4 @@
 [env:heltec-v2_0]
-custom_meshtastic_hw_model = 5
-custom_meshtastic_hw_model_slug = HELTEC_V2_0
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = Heltec V2.0
-custom_meshtastic_tags = Heltec
-
 ;build_type = debug ; to make it possible to step through our jtag debugger
 board_level = extra
 extends = esp32_base

variants/esp32/m5stack_core/platformio.ini

@@ -1,12 +1,4 @@
 [env:m5stack-core]
-custom_meshtastic_hw_model = 42
-custom_meshtastic_hw_model_slug = M5STACK
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = M5 Stack
-custom_meshtastic_tags = M5Stack
-
 extends = esp32_base
 board = m5stack-core-esp32
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -1,13 +1,5 @@
 ; The 1.0 release of the nano-g1-explorer board 
 [env:nano-g1-explorer]
-custom_meshtastic_hw_model = 17
-custom_meshtastic_hw_model_slug = NANO_G1_EXPLORER
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Nano G1 Explorer
-custom_meshtastic_tags = B&Q
-
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/nano-g1/platformio.ini

@@ -1,13 +1,5 @@
 ; The 1.0 release of the nano-g1 board 
 [env:nano-g1]
-custom_meshtastic_hw_model = 14
-custom_meshtastic_hw_model_slug = NANO_G1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Nano G1
-custom_meshtastic_tags = B&Q
-
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -1,12 +1,4 @@
 [env:radiomaster_900_bandit_nano]
-custom_meshtastic_hw_model = 64
-custom_meshtastic_hw_model_slug = RADIOMASTER_900_BANDIT_NANO
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 2
-custom_meshtastic_display_name = RadioMaster 900 Bandit Nano
-custom_meshtastic_tags = RadioMaster
-
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/rak11200/platformio.ini

@@ -1,13 +1,4 @@
 [env:rak11200]
-custom_meshtastic_hw_model = 13
-custom_meshtastic_hw_model_slug = RAK11200
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = RAK WisBlock 11200
-custom_meshtastic_images = rak11200.svg
-custom_meshtastic_tags = RAK
-
 extends = esp32_base
 board = wiscore_rak11200
 board_level = pr

variants/esp32/station-g1/platformio.ini

@@ -1,13 +1,5 @@
 ; The 1.0 release of the nano-g1 board 
 [env:station-g1]
-custom_meshtastic_hw_model = 25
-custom_meshtastic_hw_model_slug = STATION_G1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Station G1
-custom_meshtastic_tags = B&Q
-
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/tbeam/platformio.ini

@@ -1,14 +1,5 @@
 ; The 1.0 release of the TBEAM board 
 [env:tbeam]
-custom_meshtastic_hw_model = 4
-custom_meshtastic_hw_model_slug = TBEAM
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = LILYGO T-Beam
-custom_meshtastic_images = tbeam.svg
-custom_meshtastic_tags = LilyGo
-
 extends = esp32_base
 board = ttgo-t-beam
 

variants/esp32/tbeam_v07/platformio.ini

@@ -1,12 +1,5 @@
 ; The original TBEAM board without the AXP power chip and a few other changes
 [env:tbeam0_7]
-custom_meshtastic_hw_model = 6
-custom_meshtastic_hw_model_slug = TBEAM_V0P7
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = LILYGO T-Beam V0.7
-custom_meshtastic_tags = LilyGo
-
 board_level = extra
 extends = esp32_base
 board = ttgo-t-beam

variants/esp32/tlora_v1/platformio.ini

@@ -1,11 +1,4 @@
 [env:tlora-v1]
-custom_meshtastic_hw_model = 2
-custom_meshtastic_hw_model_slug = TLORA_V1
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = LILYGO T-LoRa V1
-custom_meshtastic_tags = LilyGo
-
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2/platformio.ini

@@ -1,11 +1,4 @@
 [env:tlora-v2]
-custom_meshtastic_hw_model = 1
-custom_meshtastic_hw_model_slug = TLORA_V2
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = false
-custom_meshtastic_display_name = LILYGO T-LoRa V2
-custom_meshtastic_tags = LilyGo
-
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2_1_16/platformio.ini

@@ -1,13 +1,4 @@
 [env:tlora-v2-1-1_6]
-custom_meshtastic_hw_model = 3
-custom_meshtastic_hw_model_slug = TLORA_V2_1_1P6
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.6
-custom_meshtastic_images = tlora-v2-1-1_6.svg
-custom_meshtastic_tags = LilyGo
-
 extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true

variants/esp32/tlora_v2_1_18/platformio.ini

@@ -1,13 +1,4 @@
 [env:tlora-v2-1-1_8]
-custom_meshtastic_hw_model = 15
-custom_meshtastic_hw_model_slug = TLORA_V2_1_1P8
-custom_meshtastic_architecture = esp32
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.8
-custom_meshtastic_images = tlora-v2-1-1_8.svg
-custom_meshtastic_tags = LilyGo, 2.4GHz
-
 extends = esp32_base
 board_level = extra
 board = ttgo-lora32-v21

variants/esp32c3/esp32c3.ini

@@ -4,3 +4,8 @@ custom_esp32_kind = esp32c3
 
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
+
+build_flags =
+  ${esp32_common.build_flags}
+  -DCONFIG_BT_NIMBLE_EXT_ADV=1
+  -DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -1,13 +1,4 @@
 [env:heltec-ht62-esp32c3-sx1262]
-custom_meshtastic_hw_model = 53
-custom_meshtastic_hw_model_slug = HELTEC_HT62
-custom_meshtastic_architecture = esp32-c3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec HT62
-custom_meshtastic_images = heltec-ht62-esp32c3-sx1262.svg
-custom_meshtastic_tags = Heltec
-
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -1,13 +1,4 @@
 [env:m5stack-unitc6l]
-custom_meshtastic_hw_model = 111
-custom_meshtastic_hw_model_slug = M5STACK_C6L
-custom_meshtastic_architecture = esp32-c6
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = M5Stack Unit C6L
-custom_meshtastic_images = m5_c6l.svg
-custom_meshtastic_tags = M5Stack
-
 extends = esp32c6_base
 board = esp32-c6-devkitc-1
 ;OpenOCD flash method

variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini

@@ -1,13 +1,4 @@
 [env:CDEBYTE_EoRa-S3]
-custom_meshtastic_hw_model = 61
-custom_meshtastic_hw_model_slug = CDEBYTE_EORA_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = EBYTE EoRa-S3
-custom_meshtastic_tags = EByte
-custom_meshtastic_requires_dfu = true
-
 extends = esp32s3_base
 board = CDEBYTE_EoRa-S3
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini

@@ -1,14 +1,4 @@
 [env:thinknode_m2]
-custom_meshtastic_hw_model = 90
-custom_meshtastic_hw_model_slug = THINKNODE_M2
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = ThinkNode M2
-custom_meshtastic_images = thinknode_m2.svg
-custom_meshtastic_tags = Elecrow
-custom_meshtastic_requires_dfu = false
-
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -1,14 +1,4 @@
 [env:thinknode_m5]
-custom_meshtastic_hw_model = 107
-custom_meshtastic_hw_model_slug = THINKNODE_M5
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = ThinkNode M5
-custom_meshtastic_images = thinknode_m1.svg
-custom_meshtastic_tags = Elecrow
-custom_meshtastic_requires_dfu = false
-
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/elecrow_panel/platformio.ini

@@ -75,17 +75,6 @@ build_flags =
   -D DISPLAY_SET_RESOLUTION
 
 [env:elecrow-adv-24-28-tft]
-custom_meshtastic_hw_model = 97
-custom_meshtastic_hw_model_slug = CROWPANEL
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Crowpanel Adv 2.4/2.8 TFT
-custom_meshtastic_images = crowpanel_2_4.svg, crowpanel_2_8.svg
-custom_meshtastic_tags = Elecrow
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = crowpanel_small_esp32s3_base
 build_flags =
   ${crowpanel_small_esp32s3_base.build_flags}
@@ -110,17 +99,6 @@ build_flags =
   -D LGFX_TOUCH_ROTATION=0
 
 [env:elecrow-adv-35-tft]
-custom_meshtastic_hw_model = 97
-custom_meshtastic_hw_model_slug = CROWPANEL
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Crowpanel Adv 3.5 TFT
-custom_meshtastic_images = crowpanel_3_5.svg
-custom_meshtastic_tags = Elecrow
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = crowpanel_small_esp32s3_base
 board_level = pr
 build_flags =
@@ -149,17 +127,6 @@ build_flags =
 
 ; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
 [env:elecrow-adv1-43-50-70-tft]
-custom_meshtastic_hw_model = 97
-custom_meshtastic_hw_model_slug = CROWPANEL
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Crowpanel Adv 4.3/5.0/7.0 TFT
-custom_meshtastic_images = crowpanel_5_0.svg, crowpanel_7_0.svg
-custom_meshtastic_tags = Elecrow
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = crowpanel_large_esp32s3_base
 build_flags =
   ${crowpanel_large_esp32s3_base.build_flags}

variants/esp32s3/esp32s3.ini

@@ -3,3 +3,8 @@ extends = esp32_common
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
+
+build_flags =
+  ${esp32_common.build_flags}
+  -DCONFIG_BT_NIMBLE_EXT_ADV=1
+  -DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32s3/heltec_v3/platformio.ini

@@ -1,14 +1,4 @@
-[env:heltec-v3]
-custom_meshtastic_hw_model = 43
-custom_meshtastic_hw_model_slug = HELTEC_V3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec V3
-custom_meshtastic_images = heltec-v3.svg, heltec-v3-case.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_partition_scheme = 8MB
- 
+[env:heltec-v3] 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_level = pr

variants/esp32s3/heltec_v4/platformio.ini

@@ -10,17 +10,6 @@ build_flags =
 
 
 [env:heltec-v4]
-custom_meshtastic_hw_model = 110
-custom_meshtastic_hw_model_slug = HELTEC_V4
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec V4
-custom_meshtastic_images = heltec_v4.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = heltec_v4_base
 build_flags = 
   ${heltec_v4_base.build_flags}

variants/esp32s3/heltec_v4/variant.h

@@ -29,32 +29,10 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
-// ---- GC1109 RF FRONT END CONFIGURATION ----
-// The Heltec V4 uses a GC1109 FEM chip with integrated PA and LNA
-// RF path: SX1262 -> GC1109 PA -> Pi attenuator -> Antenna
-// Measured net TX gain (non-linear due to PA compression):
-//   +11dB at 0-15dBm input  (e.g., 10dBm in -> 21dBm out)
-//   +10dB at 16-17dBm input
-//   +9dB  at 18-19dBm input
-//   +7dB  at 21dBm input    (e.g., 21dBm in -> 28dBm out max)
-// Control logic (from GC1109 datasheet):
-//   Shutdown:        CSD=0, CTX=X, CPS=X
-//   Receive LNA:     CSD=1, CTX=0, CPS=X  (17dB gain, 2dB NF)
-//   Transmit bypass: CSD=1, CTX=1, CPS=0  (~1dB loss, no PA)
-//   Transmit PA:     CSD=1, CTX=1, CPS=1  (full PA enabled)
-// Pin mapping:
-//   CTX (pin 6)  -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
-//   CSD (pin 4)  -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
-//   CPS (pin 5)  -> GPIO46: PA mode select (HIGH=full PA, LOW=bypass)
-//   VCC0/VCC1    -> Vfem via U3 LDO, controlled by GPIO7
-#define USE_GC1109_PA
-#define LORA_PA_POWER 7  // VFEM_Ctrl - GC1109 LDO power enable
-#define LORA_PA_EN 2     // CSD - GC1109 chip enable (HIGH=on)
-#define LORA_PA_TX_EN 46 // CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-
-// GC1109 FEM: TX/RX path switching is handled by DIO2 -> CTX pin (via SX126X_DIO2_AS_RF_SWITCH)
-// GPIO46 is CPS (PA mode), not TX control - setTransmitEnable() handles it in SX126xInterface.cpp
-// Do NOT use SX126X_TXEN/RXEN as that would cause double-control of GPIO46
+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
+#define LORA_PA_POWER 7 // power en
+#define LORA_PA_EN 2
+#define LORA_PA_TX_EN 46 // enable tx
 
 #if HAS_TFT
 #define USE_TFTDISPLAY 1

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -1,15 +1,4 @@
 [env:heltec-vision-master-e213]
-custom_meshtastic_hw_model = 67
-custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E213
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Vision Master E213
-custom_meshtastic_images = heltec-vision-master-e213.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -1,16 +1,5 @@
 ; Using the original screen class
 [env:heltec-vision-master-e290]
-custom_meshtastic_hw_model = 68
-custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E290
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Vision Master E290
-custom_meshtastic_images = heltec-vision-master-e290.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -1,15 +1,4 @@
 [env:heltec-vision-master-t190]
-custom_meshtastic_hw_model = 66
-custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_T190
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Vision Master T190
-custom_meshtastic_images = heltec-vision-master-t190.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_vision_master_t190
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -1,15 +1,5 @@
 ; Using the original screen class
 [env:heltec-wireless-paper]
-custom_meshtastic_hw_model = 49
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Wireless Paper
-custom_meshtastic_images = heltec-wireless-paper.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -1,14 +1,4 @@
 [env:heltec-wireless-paper-v1_0]
-custom_meshtastic_hw_model = 57
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER_V1_0
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = false
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Heltec Wireless Paper V1.0
-custom_meshtastic_images = heltec-wireless-paper-v1_0.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -1,15 +1,4 @@
 [env:heltec-wireless-tracker]
-custom_meshtastic_hw_model = 48
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Wireless Tracker V1.1
-custom_meshtastic_images = heltec-wireless-tracker.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -1,14 +1,4 @@
 [env:heltec-wireless-tracker-V1-0]
-custom_meshtastic_hw_model = 58
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V1_0
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = false
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Heltec Wireless Tracker V1.0
-custom_meshtastic_images = heltec-wireless-tracker.svg
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker

variants/esp32s3/heltec_wireless_tracker_v2/variant.h

@@ -73,29 +73,7 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
-// ---- GC1109 RF FRONT END CONFIGURATION ----
-// The Heltec Wireless Tracker V2 uses a GC1109 FEM chip with integrated PA and LNA
-// RF path: SX1262 -> GC1109 PA -> Pi attenuator -> Antenna
-// Measured net TX gain (non-linear due to PA compression):
-//   +11dB at 0-15dBm input  (e.g., 10dBm in -> 21dBm out)
-//   +10dB at 16-17dBm input
-//   +9dB  at 18-19dBm input
-//   +7dB  at 21dBm input    (e.g., 21dBm in -> 28dBm out max)
-// Control logic (from GC1109 datasheet):
-//   Shutdown:        CSD=0, CTX=X, CPS=X
-//   Receive LNA:     CSD=1, CTX=0, CPS=X  (17dB gain, 2dB NF)
-//   Transmit bypass: CSD=1, CTX=1, CPS=0  (~1dB loss, no PA)
-//   Transmit PA:     CSD=1, CTX=1, CPS=1  (full PA enabled)
-// Pin mapping:
-//   CTX (pin 6)  -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
-//   CSD (pin 4)  -> GPIO4: Chip enable (HIGH=on, LOW=shutdown)
-//   CPS (pin 5)  -> GPIO46: PA mode select (HIGH=full PA, LOW=bypass)
-//   VCC0/VCC1    -> Vfem via U3 LDO, controlled by GPIO7
-#define USE_GC1109_PA
-#define LORA_PA_POWER 7  // VFEM_Ctrl - GC1109 LDO power enable
-#define LORA_PA_EN 4     // CSD - GC1109 chip enable (HIGH=on)
-#define LORA_PA_TX_EN 46 // CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-
-// GC1109 FEM: TX/RX path switching is handled by DIO2 -> CTX pin (via SX126X_DIO2_AS_RF_SWITCH)
-// GPIO46 is CPS (PA mode), not TX control - setTransmitEnable() handles it in SX126xInterface.cpp
-// Do NOT use SX126X_TXEN/RXEN as that would cause double-control of GPIO46
+#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
+#define LORA_PA_POWER 7 // power en
+#define LORA_PA_EN 4
+#define LORA_PA_TX_EN 46 // enable tx

variants/esp32s3/heltec_wsl_v3/platformio.ini

@@ -1,14 +1,4 @@
-[env:heltec-wsl-v3]
-custom_meshtastic_hw_model = 44
-custom_meshtastic_hw_model_slug = HELTEC_WSL_V3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Wireless Stick Lite V3
-custom_meshtastic_images = heltec-wsl-v3.svg
-custom_meshtastic_tags = Heltec
-custom_meshtastic_partition_scheme = 8MB
- 
+[env:heltec-wsl-v3] 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/mesh-tab/variant.h

@@ -55,6 +55,5 @@
 #define SX126X_RESET 14
 #define SX126X_RXEN 47
 #define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
 #endif

variants/esp32s3/picomputer-s3/platformio.ini

@@ -1,12 +1,4 @@
 [env:picomputer-s3]
-custom_meshtastic_hw_model = 52
-custom_meshtastic_hw_model_slug = PICOMPUTER_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Pi Computer S3
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true

variants/esp32s3/rak3312/platformio.ini

@@ -1,15 +1,4 @@
 [env:rak3312]
-custom_meshtastic_hw_model = 106
-custom_meshtastic_hw_model_slug = RAK3312
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = RAK3312
-custom_meshtastic_images = rak_3312.svg
-custom_meshtastic_tags = RAK
-custom_meshtastic_requires_dfu = false
-custom_meshtastic_partition_scheme = 16MB
-
 extends = esp32s3_base
 board = wiscore_rak3312
 board_level = pr
@@ -24,7 +13,8 @@ build_flags =
 [env:rak3112]
 extends = esp32s3_base
 board = wiscore_rak3312
-board_level = extra
+board_level = pr
+board_check = true
 upload_protocol = esptool
 
 build_flags =

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -1,16 +1,5 @@
 ; Seeed Studio SenseCAP Indicator
 [env:seeed-sensecap-indicator]
-custom_meshtastic_hw_model = 70
-custom_meshtastic_hw_model_slug = SENSECAP_INDICATOR
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Seeed SenseCAP Indicator
-custom_meshtastic_images = seeed-sensecap-indicator.svg
-custom_meshtastic_tags = Seeed
-custom_meshtastic_partition_scheme = 8MB
- = true
-
 extends = esp32s3_base
 platform_packages =
     platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -1,15 +1,4 @@
 [env:seeed-xiao-s3]
-custom_meshtastic_hw_model = 81
-custom_meshtastic_hw_model_slug = SEEED_XIAO_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Seeed Xiao ESP32-S3
-custom_meshtastic_images = seeed-xiao-s3.svg
-custom_meshtastic_tags = Seeed
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_level = pr

variants/esp32s3/station-g2/platformio.ini

@@ -1,15 +1,4 @@
 [env:station-g2]
-custom_meshtastic_hw_model = 31
-custom_meshtastic_hw_model_slug = STATION_G2
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 2
-custom_meshtastic_display_name = Station G2
-custom_meshtastic_images = station-g2.svg
-custom_meshtastic_tags = B&Q
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = esp32s3_base
 board = station-g2
 board_level = pr

variants/esp32s3/t-beam-1w/pins_arduino.h

@@ -1,25 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <stdint.h>
-
-#define USB_VID 0x303a
-#define USB_PID 0x1001
-
-static const uint8_t TX = 43;
-static const uint8_t RX = 44;
-
-// I2C for OLED and sensors
-static const uint8_t SDA = 8;
-static const uint8_t SCL = 9;
-
-// Default SPI mapped to Radio/SD
-static const uint8_t SS = 15;   // LoRa CS
-static const uint8_t MOSI = 11;
-static const uint8_t MISO = 12;
-static const uint8_t SCK = 13;
-
-// SD Card CS
-#define SDCARD_CS 10
-
-#endif /* Pins_Arduino_h */

variants/esp32s3/t-beam-1w/platformio.ini

@@ -1,14 +0,0 @@
-; LilyGo T-Beam-1W (1 Watt LoRa with external PA)
-[env:t-beam-1w]
-extends = esp32s3_base
-board = t-beam-1w
-board_build.partitions = default_8MB.csv
-board_check = true
-
-lib_deps =
-  ${esp32s3_base.lib_deps}
-
-build_flags = 
-  ${esp32s3_base.build_flags} 
-  -I variants/esp32s3/t-beam-1w
-  -D T_BEAM_1W

variants/esp32s3/t-beam-1w/variant.h

@@ -1,97 +0,0 @@
-// LilyGo T-Beam-1W variant.h  
-// Configuration based on LilyGO utilities.h and RF documentation
-
-// I2C for OLED display (SH1106 at 0x3C)
-#define I2C_SDA 8
-#define I2C_SCL 9
-
-// GPS - Quectel L76K
-#define GPS_RX_PIN 5
-#define GPS_TX_PIN 6
-#define GPS_1PPS_PIN 7
-#define GPS_WAKEUP_PIN 16  // GPS_EN_PIN in LilyGO code
-#define HAS_GPS 1
-#define GPS_BAUDRATE 9600
-
-// Buttons
-#define BUTTON_PIN 0         // BUTTON 1
-#define BUTTON_PIN_ALT 17    // BUTTON 2
-
-// SPI (shared by LoRa and SD)
-#define SPI_MOSI 11
-#define SPI_SCK 13
-#define SPI_MISO 12
-#define SPI_CS 10
-
-// SD Card
-#define HAS_SDCARD
-#define SDCARD_USE_SPI1
-#define SDCARD_CS SPI_CS
-
-// LoRa Radio - SX1262 with 1W PA
-#define USE_SX1262
-
-#define LORA_SCK SPI_SCK
-#define LORA_MISO SPI_MISO  
-#define LORA_MOSI SPI_MOSI
-#define LORA_CS 15
-#define LORA_RESET 3
-#define LORA_DIO1 1
-#define LORA_BUSY 38
-
-// CRITICAL: Radio power enable - MUST be HIGH before lora.begin()!
-// GPIO 40 powers the SX1262 + PA module via LDO
-#define SX126X_POWER_EN 40
-
-// TX power offset for external PA (0 = no offset, full SX1262 power)
-#define TX_GAIN_LORA 10
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_BUSY
-#define SX126X_RESET LORA_RESET
-
-// RF switching configuration for 1W PA module
-// DIO2 controls PA (via SX126X_DIO2_AS_RF_SWITCH)
-// CTRL PIN (GPIO 21) controls LNA - must be HIGH during RX
-// Truth table: DIO2=1,CTRL=0 → TX (PA on, LNA off)
-//              DIO2=0,CTRL=1 → RX (PA off, LNA on)
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_RXEN 21  // LNA enable - HIGH during RX
-
-// TCXO voltage - required for radio init
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-
-#define SX126X_MAX_POWER 22
-#endif
-
-// LED
-#define LED_PIN 18
-#define LED_STATE_ON 1  // HIGH = ON
-
-// Battery ADC
-#define BATTERY_PIN 4
-#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
-#define BATTERY_SENSE_SAMPLES 30
-#define ADC_MULTIPLIER 2.9333
-
-// NTC temperature sensor
-#define NTC_PIN 14
-
-// Fan control
-#define FAN_CTRL_PIN 41
-// Meshtastic standard fan control pin macro
-#define RF95_FAN_EN FAN_CTRL_PIN
-
-// PA Ramp Time - T-Beam 1W requires >800us stabilization (default is 200us)
-// Value 0x05 = RADIOLIB_SX126X_PA_RAMP_800U
-#define SX126X_PA_RAMP_US 0x05
-
-// Display - SH1106 OLED (128x64)
-#define USE_SH1106 
-#define OLED_WIDTH 128
-#define OLED_HEIGHT 64
-
-// 32768 Hz crystal present
-#define HAS_32768HZ 1

variants/esp32s3/t-deck-pro/platformio.ini

@@ -1,15 +1,4 @@
 [env:t-deck-pro]
-custom_meshtastic_hw_model = 102
-custom_meshtastic_hw_model_slug = T_DECK_PRO
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-Deck Pro
-custom_meshtastic_images = tdeck_pro.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = esp32s3_base
 board = t-deck-pro
 board_check = true

variants/esp32s3/t-deck/platformio.ini

@@ -1,16 +1,5 @@
 ; LilyGo T-Deck
 [env:t-deck]
-custom_meshtastic_hw_model = 50
-custom_meshtastic_hw_model_slug = T_DECK
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-Deck
-custom_meshtastic_images = t-deck.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = esp32s3_base
 board = t-deck
 board_check = true

variants/esp32s3/t-watch-s3/platformio.ini

@@ -1,15 +1,5 @@
 ; LilyGo T-Watch S3
 [env:t-watch-s3]
-custom_meshtastic_hw_model = 51
-custom_meshtastic_hw_model_slug = T_WATCH_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = LILYGO T-Watch S3
-custom_meshtastic_images = t-watch-s3.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = t-watch-s3
 board_check = true

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -1,16 +1,5 @@
 ; The 1.0 release of the LilyGo TBEAM-S3-Core board 
 [env:tbeam-s3-core]
-custom_meshtastic_hw_model = 12
-custom_meshtastic_hw_model_slug = LILYGO_TBEAM_S3_CORE
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-Beam Supreme
-custom_meshtastic_images = tbeam-s3-core.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = tbeam-s3-core
 board_build.partitions = default_8MB.csv

variants/esp32s3/tlora-pager/platformio.ini

@@ -1,16 +1,5 @@
 ; LilyGo T-Lora-Pager
 [env:tlora-pager]
-custom_meshtastic_hw_model = 103
-custom_meshtastic_hw_model_slug = T_LORA_PAGER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-LoRa Pager
-custom_meshtastic_images = lilygo-tlora-pager.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 16MB
-
 extends = esp32s3_base
 board = t-deck-pro ; same as T-Deck Pro
 board_check = true

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -1,14 +1,4 @@
 [env:tlora-t3s3-epaper]
-custom_meshtastic_hw_model = 16
-custom_meshtastic_hw_model_slug = TLORA_T3_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-LoRa T3-S3 E-Ink
-custom_meshtastic_images = tlora-t3s3-epaper.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-
 extends = esp32s3_base
 board = tlora-t3s3-v1
 board_check = true

variants/esp32s3/tlora_t3s3_v1/platformio.ini

@@ -1,14 +1,4 @@
 [env:tlora-t3s3-v1]
-custom_meshtastic_hw_model = 16
-custom_meshtastic_hw_model_slug = TLORA_T3_S3
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = LILYGO T-LoRa T3-S3
-custom_meshtastic_images = tlora-t3s3-v1.svg
-custom_meshtastic_tags = LilyGo
-custom_meshtastic_requires_dfu = true
-
 extends = esp32s3_base
 board = tlora-t3s3-v1
 board_check = true

variants/esp32s3/tracksenger/platformio.ini

@@ -1,13 +1,4 @@
 [env:tracksenger]
-custom_meshtastic_hw_model = 48
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = TrackSenger (small TFT)
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
@@ -25,15 +16,6 @@ lib_deps =
   lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-lcd]
-custom_meshtastic_hw_model = 48
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = false
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = TrackSenger (big TFT)
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
@@ -51,14 +33,6 @@ lib_deps =
   lovyan03/LovyanGFX@1.2.7
 
 [env:tracksenger-oled]
-custom_meshtastic_hw_model = 48
-custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = TrackSenger (big OLED)
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv

variants/esp32s3/unphone/platformio.ini

@@ -1,15 +1,6 @@
 ; platformio.ini for unphone meshtastic
 
 [env:unphone]
-custom_meshtastic_hw_model = 59
-custom_meshtastic_hw_model_slug = UNPHONE
-custom_meshtastic_architecture = esp32-s3
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = unPhone
-custom_meshtastic_requires_dfu = true
-custom_meshtastic_partition_scheme = 8MB
-
 extends = esp32s3_base
 board = unphone
 board_build.partitions = partition-table-8MB.csv

variants/native/portduino.ini

@@ -34,8 +34,6 @@ lib_deps =
 	adafruit/Adafruit seesaw Library@1.7.9
   # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
-  # renovate: datasource=custom.pio depName=adafruit/Adafruit BME680 Library packageName=adafruit/library/Adafruit BME680
-  adafruit/Adafruit BME680 Library@^2.0.5
 
 build_flags =
   ${arduino_base.build_flags}

variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini

@@ -1,14 +1,5 @@
 ; First prototype eink/nrf52840/sx1262 device
 [env:thinknode_m1]
-custom_meshtastic_hw_model = 89
-custom_meshtastic_hw_model_slug = THINKNODE_M1
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = ThinkNode M1
-custom_meshtastic_images = thinknode_m1.svg
-custom_meshtastic_tags = Elecrow
-
 extends = nrf52840_base
 board = ThinkNode-M1
 board_check = true

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -1,17 +1,8 @@
 [env:thinknode_m3]
-custom_meshtastic_support_level = 1
-custom_meshtastic_images = thinknode_m3.svg
-custom_meshtastic_tags = Elecrow
-
 extends = nrf52840_base
 board = ThinkNode-M3
 board_check = true
 debug_tool = jlink
-custom_meshtastic_hw_model = 115
-custom_meshtastic_hw_model_slug = THINKNODE_M3
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_display_name = Elecrow ThinkNode M3
-custom_meshtastic_actively_supported = true
 build_flags = 
   ${nrf52840_base.build_flags} 
   -Ivariants/nrf52840/ELECROW-ThinkNode-M3

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -1,14 +1,5 @@
 ; ThinkNode M6 - Outdoor Solar Power nrf52840/sx1262 device
 [env:thinknode_m6]
-custom_meshtastic_hw_model = 120
-custom_meshtastic_hw_model_slug = THINKNODE_M6
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_actively_supported = false
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = ThinkNode M6
-custom_meshtastic_images = thinknode_m6.svg
-custom_meshtastic_tags = Elecrow
-
 extends = nrf52840_base
 board = ThinkNode-M6
 board_check = true

variants/nrf52840/canaryone/platformio.ini

@@ -1,13 +1,5 @@
 ; Public Beta oled/nrf52840/sx1262 device
 [env:canaryone]
-custom_meshtastic_hw_model = 29
-custom_meshtastic_hw_model_slug = CANARYONE
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = Canary One
-custom_meshtastic_tags = Canary
-
 extends = nrf52840_base
 board = canaryone
 debug_tool = jlink

variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini

@@ -1,15 +1,5 @@
 ; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
 [env:nrf52_promicro_diy_tcxo]
-custom_meshtastic_hw_model = 63
-custom_meshtastic_hw_model_slug = NRF52_PROMICRO_DIY
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 3
-custom_meshtastic_display_name = NRF52 Pro-micro DIY
-custom_meshtastic_images = promicro.svg
-custom_meshtastic_tags = DIY
-custom_meshtastic_requires_dfu = true
-
 extends = nrf52840_base
 board = promicro-nrf52840
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/heltec_mesh_node_t114/platformio.ini

@@ -1,14 +1,5 @@
 ; First prototype nrf52840/sx1262 device
 [env:heltec-mesh-node-t114]
-custom_meshtastic_hw_model = 69
-custom_meshtastic_hw_model_slug = HELTEC_MESH_NODE_T114
-custom_meshtastic_architecture = nrf52840
-custom_meshtastic_actively_supported = true
-custom_meshtastic_support_level = 1
-custom_meshtastic_display_name = Heltec Mesh Node T114
-custom_meshtastic_images = heltec-mesh-node-t114.svg, heltec-mesh-node-t114-case.svg
-custom_meshtastic_tags = Heltec
-
 extends = nrf52840_base
 board = heltec_mesh_node_t114
 board_level = pr