ThinkNode G3, ETH support WIP

* Implement Meshtastic reply bot module with ping and status features

Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes.

* Update ReplyBotModule.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update src/modules/ReplyBotModule.h

Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default.

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update src/modules/ReplyBotModule.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Tidying up

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

platformio.ini

@@ -50,6 +50,7 @@ build_flags = -Wno-missing-field-initializers
 	-DRADIOLIB_EXCLUDE_APRS=1
 	-DRADIOLIB_EXCLUDE_LORAWAN=1
 	-DMESHTASTIC_EXCLUDE_DROPZONE=1
+	-DMESHTASTIC_EXCLUDE_REPLYBOT=1
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware

src/DebugConfiguration.h

@@ -13,6 +13,11 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
+// WIFI LED
+#ifndef WIFI_STATE_ON
+#define WIFI_STATE_ON 1
+#endif
+
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -147,7 +152,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && defined(USE_CH390D)
+#include <ESP32_CH390.h>
+#elif HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/Power.cpp

@@ -459,6 +459,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
+        // If we have an EXT_PWR_DETECT pin and it indicates no external power, believe it.
+        return false;
 
 // technically speaking this should work for all(?) NRF52 boards
 // but needs testing across multiple devices. NRF52 USB would not even work if

src/graphics/Screen.cpp

@@ -168,7 +168,7 @@ void Screen::showOverlayBanner(BannerOverlayOptions banner_overlay_options)
     NotificationRenderer::pauseBanner = false;
     NotificationRenderer::current_notification_type = notificationTypeEnum::selection_picker;
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, 2);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -190,7 +190,7 @@ void Screen::showNodePicker(const char *message, uint32_t durationMs, std::funct
     NotificationRenderer::current_notification_type = notificationTypeEnum::node_picker;
 
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, 2);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -214,7 +214,7 @@ void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t
     NotificationRenderer::currentNumber = 0;
 
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, 2);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -237,7 +237,7 @@ void Screen::showTextInput(const char *header, const char *initialText, uint32_t
 
     // Set the overlay using the same pattern as other notification types
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, 2);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
     ui->setTargetFPS(60);
     ui->update();
 }
@@ -608,7 +608,7 @@ void Screen::setup()
     static OverlayCallback overlays[] = {
         graphics::UIRenderer::drawNavigationBar // Custom indicator icons for each frame
     };
-    ui->setOverlays(overlays, 1);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
     // Enable UTF-8 to display mapping
     dispdev->setFontTableLookupFunction(customFontTableLookup);
@@ -1202,7 +1202,7 @@ void Screen::setFrames(FrameFocus focus)
 
     // Add overlays: frame icons and alert banner)
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, 2);
+    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
     prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
 
@@ -1630,7 +1630,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
         NotificationRenderer::inEvent = *event;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-        ui->setOverlays(overlays, 2);
+        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
         setFastFramerate(); // Draw ASAP
         ui->update();
         return 0;
@@ -1645,7 +1645,7 @@ int Screen::handleInputEvent(const InputEvent *event)
     if (NotificationRenderer::isOverlayBannerShowing()) {
         NotificationRenderer::inEvent = *event;
         static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-        ui->setOverlays(overlays, 2);
+        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
         setFastFramerate(); // Draw ASAP
         ui->update();
 

src/graphics/niche/InkHUD/Applet.cpp

@@ -1,3 +1,5 @@
+#include "graphics/niche/InkHUD/Tile.h"
+#include <cstdint>
 #ifdef MESHTASTIC_INCLUDE_INKHUD
 
 #include "./Applet.h"
@@ -785,6 +787,16 @@ void InkHUD::Applet::drawHeader(std::string text)
         drawPixel(x, 0, BLACK);
         drawPixel(x, headerDivY, BLACK); // Dotted 50%
     }
+
+    // Dither near battery
+    if (settings->optionalFeatures.batteryIcon) {
+        constexpr uint16_t ditherSizePx = 4;
+        Tile *batteryTile = ((Applet *)inkhud->getSystemApplet("BatteryIcon"))->getTile();
+        const uint16_t batteryTileLeft = batteryTile->getLeft();
+        const uint16_t batteryTileTop = batteryTile->getTop();
+        const uint16_t batteryTileHeight = batteryTile->getHeight();
+        hatchRegion(batteryTileLeft - ditherSizePx, batteryTileTop, ditherSizePx, batteryTileHeight, 2, WHITE);
+    }
 }
 
 // Get the height of the standard applet header

src/graphics/niche/InkHUD/Applets/System/BatteryIcon/BatteryIconApplet.cpp

@@ -48,37 +48,27 @@ int InkHUD::BatteryIconApplet::onPowerStatusUpdate(const meshtastic::Status *sta
 
 void InkHUD::BatteryIconApplet::onRender(bool full)
 {
-    // Fill entire tile
-    // - size of icon controlled by size of tile
-    int16_t l = 0;
-    int16_t t = 0;
-    uint16_t w = width();
-    int16_t h = height();
-
-    // Clear the region beneath the tile
+    // Clear the region beneath the tile, including the border
     // Most applets are drawing onto an empty frame buffer and don't need to do this
     // We do need to do this with the battery though, as it is an "overlay"
-    fillRect(l, t, w, h, WHITE);
-
-    // Vertical centerline
-    const int16_t m = t + (h / 2);
+    fillRect(0, 0, width(), height(), WHITE);
 
     // =====================
     // Draw battery outline
     // =====================
 
     // Positive terminal "bump"
-    const int16_t &bumpL = l;
-    const uint16_t bumpH = h / 2;
-    const int16_t bumpT = m - (bumpH / 2);
     constexpr uint16_t bumpW = 2;
+    const int16_t &bumpL = 1;
+    const uint16_t bumpH = (height() - 2) / 2;
+    const int16_t bumpT = (1 + ((height() - 2) / 2)) - (bumpH / 2);
     fillRect(bumpL, bumpT, bumpW, bumpH, BLACK);
 
     // Main body of battery
-    const int16_t bodyL = bumpL + bumpW;
-    const int16_t &bodyT = t;
-    const int16_t &bodyH = h;
-    const int16_t bodyW = w - bumpW;
+    const int16_t bodyL = 1 + bumpW;
+    const int16_t &bodyT = 1;
+    const int16_t &bodyH = height() - 2;         // Handle top/bottom padding
+    const int16_t bodyW = (width() - 1) - bumpW; // Handle 1px left pad
     drawRect(bodyL, bodyT, bodyW, bodyH, BLACK);
 
     // Erase join between bump and body
@@ -89,12 +79,13 @@ void InkHUD::BatteryIconApplet::onRender(bool full)
     // ===================
 
     constexpr int16_t slicePad = 2;
-    const int16_t sliceL = bodyL + slicePad;
+    int16_t sliceL = bodyL + slicePad;
     const int16_t sliceT = bodyT + slicePad;
     const uint16_t sliceH = bodyH - (slicePad * 2);
     uint16_t sliceW = bodyW - (slicePad * 2);
 
-    sliceW = (sliceW * socRounded) / 100; // Apply percentage
+    sliceW = (sliceW * socRounded) / 100;          // Apply percentage
+    sliceL += ((bodyW - (slicePad * 2)) - sliceW); // Shift slice to the battery's negative terminal, correcting drain direction
 
     hatchRegion(sliceL, sliceT, sliceW, sliceH, 2, BLACK);
     drawRect(sliceL, sliceT, sliceW, sliceH, BLACK);

src/graphics/niche/InkHUD/WindowManager.cpp

@@ -510,10 +510,10 @@ void InkHUD::WindowManager::placeSystemTiles()
     const uint16_t batteryIconWidth = batteryIconHeight * 1.8;
     inkhud->getSystemApplet("BatteryIcon")
         ->getTile()
-        ->setRegion(inkhud->width() - batteryIconWidth, // x
-                    2,                                  // y
-                    batteryIconWidth,                   // width
-                    batteryIconHeight);                 // height
+        ->setRegion(inkhud->width() - batteryIconWidth - 1, // x
+                    1,                                      // y
+                    batteryIconWidth + 1,                   // width
+                    batteryIconHeight + 2);                 // height
 
     // Note: the tiles of placeholder and menu applets are manipulated specially
     // - menuApplet borrows user tiles

src/main.cpp

@@ -361,7 +361,7 @@ void setup()
 
 #ifdef WIFI_LED
     pinMode(WIFI_LED, OUTPUT);
-    digitalWrite(WIFI_LED, LOW);
+    digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
 
 #ifdef BLE_LED

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/NodeDB.cpp

@@ -2223,8 +2223,8 @@ bool NodeDB::restorePreferences(meshtastic_AdminMessage_BackupLocation location,
     } else if (location == meshtastic_AdminMessage_BackupLocation_SD) {
         // TODO: After more mainline SD card support
     }
-    return success;
 #endif
+    return success;
 }
 
 /// Record an error that should be reported via analytics

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 
 #include "ethServerAPI.h"
 

src/mesh/api/ethServerAPI.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
-#ifndef USE_WS5500
+#if !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <RAK13800_W5100S.h>
 
 /**

src/mesh/wifi/WiFiAPClient.cpp

@@ -384,13 +384,13 @@ static void WiFiEvent(WiFiEvent_t event)
 #endif
         }
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         LOG_INFO("Disconnected from WiFi access point");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
@@ -442,13 +442,13 @@ static void WiFiEvent(WiFiEvent_t event)
     case ARDUINO_EVENT_WIFI_AP_START:
         LOG_INFO("WiFi access point started");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STOP:
         LOG_INFO("WiFi access point stopped");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STACONNECTED:

src/modules/AdminModule.cpp

@@ -1274,7 +1274,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     }
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
     conn.has_ethernet = true;
     conn.ethernet.has_status = true;
     if (Ethernet.linkStatus() == LinkON) {

src/modules/ReplyBotModule.cpp

@@ -0,0 +1,183 @@
+#if !MESHTASTIC_EXCLUDE_REPLYBOT
+/*
+ * ReplyBotModule.cpp
+ *
+ * This module implements a simple reply bot for the Meshtastic firmware.  It listens for
+ * specific text commands ("/ping", "/hello" and "/test") delivered either via a direct
+ * message (DM) or a broadcast on the primary channel.  When a supported command is
+ * received the bot responds with a short status message that includes the hop count
+ * (minimum number of relays), RSSI and SNR of the received packet.  To avoid spamming
+ * the network it enforces a per‑sender cooldown between responses.  By default the
+ * module is enabled; define MESHTASTIC_EXCLUDE_REPLYBOT at build time to exclude it
+ * entirely.  See the official firmware documentation for guidance on adding modules.
+ */
+
+#include "ReplyBotModule.h"
+#include "Channels.h"
+#include "MeshService.h"
+#include "NodeDB.h"
+#include "configuration.h"
+#include "mesh/MeshTypes.h"
+
+#include <Arduino.h>
+#include <cctype>
+#include <cstring>
+
+//
+// Rate limiting data structures
+//
+// Each sender is tracked in a small ring buffer.  When a message arrives from a
+// sender we check the last time we responded to them.  If the difference is
+// less than the configured cooldown (different values for DM vs broadcast)
+// the message is ignored; otherwise we update the last response time and
+// proceed with replying.
+
+struct ReplyBotCooldownEntry {
+    uint32_t from = 0;
+    uint32_t lastMs = 0;
+};
+
+static constexpr uint8_t REPLYBOT_COOLDOWN_SLOTS = 8;          // ring buffer size
+static constexpr uint32_t REPLYBOT_DM_COOLDOWN_MS = 15 * 1000; // 15 seconds for DMs
+static constexpr uint32_t REPLYBOT_LF_COOLDOWN_MS = 60 * 1000; // 60 seconds for LongFast broadcasts
+
+static ReplyBotCooldownEntry replybotCooldown[REPLYBOT_COOLDOWN_SLOTS];
+static uint8_t replybotCooldownIdx = 0;
+
+// Return true if a reply should be rate‑limited for this sender, updating the
+// entry table as needed.
+static bool replybotRateLimited(uint32_t from, uint32_t cooldownMs)
+{
+    const uint32_t now = millis();
+    for (auto &e : replybotCooldown) {
+        if (e.from == from) {
+            // Found existing entry; check if cooldown expired
+            if ((uint32_t)(now - e.lastMs) < cooldownMs) {
+                return true;
+            }
+            e.lastMs = now;
+            return false;
+        }
+    }
+    // No entry found – insert new sender into the ring
+    replybotCooldown[replybotCooldownIdx].from = from;
+    replybotCooldown[replybotCooldownIdx].lastMs = now;
+    replybotCooldownIdx = (replybotCooldownIdx + 1) % REPLYBOT_COOLDOWN_SLOTS;
+    return false;
+}
+
+// Constructor – registers a single text port and marks the module promiscuous
+// so that broadcast messages on the primary channel are visible.
+ReplyBotModule::ReplyBotModule() : SinglePortModule("replybot", meshtastic_PortNum_TEXT_MESSAGE_APP)
+{
+    isPromiscuous = true;
+}
+
+void ReplyBotModule::setup()
+{
+    // In future we may add a protobuf configuration; for now the module is
+    // always enabled when compiled in.
+}
+
+// Determine whether we want to process this packet.  We only care about
+// plain text messages addressed to our port.
+bool ReplyBotModule::wantPacket(const meshtastic_MeshPacket *p)
+{
+    return (p && p->decoded.portnum == ourPortNum);
+}
+
+ProcessMessage ReplyBotModule::handleReceived(const meshtastic_MeshPacket &mp)
+{
+    // Accept only direct messages to us or broadcasts on the Primary channel
+    // (regardless of modem preset: LongFast, MediumFast, etc).
+
+    const uint32_t ourNode = nodeDB->getNodeNum();
+    const bool isDM = (mp.to == ourNode);
+    const bool isPrimaryChannel = (mp.channel == channels.getPrimaryIndex()) && isBroadcast(mp.to);
+    if (!isDM && !isPrimaryChannel) {
+        return ProcessMessage::CONTINUE;
+    }
+
+    // Ignore empty payloads
+    if (mp.decoded.payload.size == 0) {
+        return ProcessMessage::CONTINUE;
+    }
+
+    // Copy payload into a null‑terminated buffer
+    char buf[260];
+    memset(buf, 0, sizeof(buf));
+    size_t n = mp.decoded.payload.size;
+    if (n > sizeof(buf) - 1)
+        n = sizeof(buf) - 1;
+    memcpy(buf, mp.decoded.payload.bytes, n);
+
+    // React only to supported slash commands
+    if (!isCommand(buf)) {
+        return ProcessMessage::CONTINUE;
+    }
+
+    // Apply rate limiting per sender depending on DM/broadcast
+    const uint32_t cooldownMs = isDM ? REPLYBOT_DM_COOLDOWN_MS : REPLYBOT_LF_COOLDOWN_MS;
+    if (replybotRateLimited(mp.from, cooldownMs)) {
+        return ProcessMessage::CONTINUE;
+    }
+
+    // Compute hop count indicator – if the relay_node is non‑zero we know
+    // there was at least one relay.  Some firmware builds support a hop_start
+    // field which could be used for more accurate counts, but here we use
+    // the available relay_node flag only.
+    // int hopsAway = mp.hop_start - mp.hop_limit;
+    int hopsAway = getHopsAway(mp);
+
+    // Normalize RSSI: if positive adjust down by 200 to align with typical values
+    int rssi = mp.rx_rssi;
+    if (rssi > 0) {
+        rssi -= 200;
+    }
+    float snr = mp.rx_snr;
+
+    // Build the reply message and send it back via DM
+    char reply[96];
+    snprintf(reply, sizeof(reply), "🎙️ Mic Check : %d Hops away | RSSI %d | SNR %.1f", hopsAway, rssi, snr);
+    sendDm(mp, reply);
+    return ProcessMessage::CONTINUE;
+}
+
+// Check if the message starts with one of the supported commands.  Leading
+// whitespace is skipped and commands must be followed by end‑of‑string or
+// whitespace.
+bool ReplyBotModule::isCommand(const char *msg) const
+{
+    if (!msg)
+        return false;
+    while (*msg == ' ' || *msg == '\t')
+        msg++;
+    auto isEndOrSpace = [](char c) { return c == '\0' || std::isspace(static_cast<unsigned char>(c)); };
+    if (strncmp(msg, "/ping", 5) == 0 && isEndOrSpace(msg[5]))
+        return true;
+    if (strncmp(msg, "/hello", 6) == 0 && isEndOrSpace(msg[6]))
+        return true;
+    if (strncmp(msg, "/test", 5) == 0 && isEndOrSpace(msg[5]))
+        return true;
+    return false;
+}
+
+// Send a direct message back to the originating node.
+void ReplyBotModule::sendDm(const meshtastic_MeshPacket &rx, const char *text)
+{
+    if (!text)
+        return;
+    meshtastic_MeshPacket *p = allocDataPacket();
+    p->to = rx.from;
+    p->channel = rx.channel;
+    p->want_ack = false;
+    p->decoded.want_response = false;
+    size_t len = strlen(text);
+    if (len > sizeof(p->decoded.payload.bytes)) {
+        len = sizeof(p->decoded.payload.bytes);
+    }
+    p->decoded.payload.size = len;
+    memcpy(p->decoded.payload.bytes, text, len);
+    service->sendToMesh(p);
+}
+#endif // MESHTASTIC_EXCLUDE_REPLYBOT

src/modules/ReplyBotModule.h

@@ -0,0 +1,18 @@
+#pragma once
+#if !MESHTASTIC_EXCLUDE_REPLYBOT
+#include "SinglePortModule.h"
+#include "mesh/generated/meshtastic/mesh.pb.h"
+
+class ReplyBotModule : public SinglePortModule
+{
+  public:
+    ReplyBotModule();
+    void setup() override;
+    bool wantPacket(const meshtastic_MeshPacket *p) override;
+    ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
+
+  protected:
+    bool isCommand(const char *msg) const;
+    void sendDm(const meshtastic_MeshPacket &rx, const char *text);
+};
+#endif // MESHTASTIC_EXCLUDE_REPLYBOT

src/mqtt/MQTT.h

@@ -15,7 +15,7 @@
 #include <WiFiClientSecure.h>
 #endif
 #endif
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <EthernetClient.h>
 #endif
 

src/nimble/NimbleBluetooth.cpp

@@ -573,30 +573,51 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     virtual uint32_t onPassKeyRequest()
 #endif
     {
-        uint32_t configuredPasskey = config.bluetooth.fixed_pin;
+        uint32_t passkey = config.bluetooth.fixed_pin;
 
         if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
             LOG_INFO("Use random passkey");
             // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
-            configuredPasskey = random(100000, 999999);
+            passkey = random(100000, 999999);
         }
-        LOG_INFO("*** Enter passkey %d on the peer side ***", configuredPasskey);
+        LOG_INFO("*** Enter passkey %d on the peer side ***", passkey);
 
         powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
-        std::string passkey = std::to_string(configuredPasskey);
-        meshtastic::BluetoothStatus newStatus(passkey);
+        meshtastic::BluetoothStatus newStatus(std::to_string(passkey));
         bluetoothStatus->updateStatus(&newStatus);
 
 #if HAS_SCREEN // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (screen) {
+            screen->startAlert([passkey](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
+                char btPIN[16] = "888888";
+                snprintf(btPIN, sizeof(btPIN), "%06u", passkey);
+                int x_offset = display->width() / 2;
+                int y_offset = display->height() <= 80 ? 0 : 12;
+                display->setTextAlignment(TEXT_ALIGN_CENTER);
+                display->setFont(FONT_MEDIUM);
+                display->drawString(x_offset + x, y_offset + y, "Bluetooth");
+#if !defined(M5STACK_UNITC6L)
+                display->setFont(FONT_SMALL);
+                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM - 4 : y_offset + FONT_HEIGHT_MEDIUM + 5;
+                display->drawString(x_offset + x, y_offset + y, "Enter this code");
+#endif
+                display->setFont(FONT_LARGE);
+                char pin[8];
+                snprintf(pin, sizeof(pin), "%.3s %.3s", btPIN, btPIN + 3);
+                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_SMALL - 5 : y_offset + FONT_HEIGHT_SMALL + 5;
+                display->drawString(x_offset + x, y_offset + y, pin);
 
-            std::string ble_message = "Bluetooth\nPIN\n" + passkey.substr(0, 3) + " " + passkey.substr(3, 6);
-            screen->showSimpleBanner(ble_message.c_str(), 30000);
+                display->setFont(FONT_SMALL);
+                char deviceName[64];
+                snprintf(deviceName, sizeof(deviceName), "Name: %s", getDeviceName());
+                y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_LARGE - 6 : y_offset + FONT_HEIGHT_LARGE + 5;
+                display->drawString(x_offset + x, y_offset + y, deviceName);
+            });
         }
 #endif
         passkeyShowing = true;
 
-        return configuredPasskey;
+        return passkey;
     }
 
 #ifdef NIMBLE_TWO

src/platform/nrf52/NRF52Bluetooth.cpp

@@ -370,11 +370,34 @@ bool NRF52Bluetooth::onPairingPasskey(uint16_t conn_handle, uint8_t const passke
     meshtastic::BluetoothStatus newStatus(textkey);
     bluetoothStatus->updateStatus(&newStatus);
 
-#if HAS_SCREEN && !defined(MESHTASTIC_EXCLUDE_SCREEN)
+#if HAS_SCREEN &&                                                                                                                \
+    !defined(MESHTASTIC_EXCLUDE_SCREEN) // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
     if (screen) {
-        std::string passkey = std::to_string(configuredPasskey);
-        std::string ble_message = "Bluetooth\nPIN\n" + passkey.substr(0, 3) + " " + passkey.substr(3, 6);
-        screen->showSimpleBanner(ble_message.c_str(), 30000);
+        screen->startAlert([](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
+            char btPIN[16] = "888888";
+            snprintf(btPIN, sizeof(btPIN), "%06u", configuredPasskey);
+            int x_offset = display->width() / 2;
+            int y_offset = display->height() <= 80 ? 0 : 12;
+            display->setTextAlignment(TEXT_ALIGN_CENTER);
+            display->setFont(FONT_MEDIUM);
+            display->drawString(x_offset + x, y_offset + y, "Bluetooth");
+
+            display->setFont(FONT_SMALL);
+            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_MEDIUM - 4 : y_offset + FONT_HEIGHT_MEDIUM + 5;
+            display->drawString(x_offset + x, y_offset + y, "Enter this code");
+
+            display->setFont(FONT_LARGE);
+            String displayPin(btPIN);
+            String pin = displayPin.substring(0, 3) + " " + displayPin.substring(3, 6);
+            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_SMALL - 5 : y_offset + FONT_HEIGHT_SMALL + 5;
+            display->drawString(x_offset + x, y_offset + y, pin);
+
+            display->setFont(FONT_SMALL);
+            String deviceName = "Name: ";
+            deviceName.concat(getDeviceName());
+            y_offset = display->height() == 64 ? y_offset + FONT_HEIGHT_LARGE - 6 : y_offset + FONT_HEIGHT_LARGE + 5;
+            display->drawString(x_offset + x, y_offset + y, deviceName);
+        });
     }
 #endif
     if (match_request) {

variants/esp32s3/ELECROW-ThinkNode-G3/pins_arduino.h

@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 39;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 41;
+static const uint8_t SCK = 42;
+
+// #define SPI_MOSI (11)
+// #define SPI_SCK (10)
+// #define SPI_MISO (9)
+// #define SPI_CS (12)
+
+// #define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/ELECROW-ThinkNode-G3/platformio.ini

@@ -0,0 +1,22 @@
+[env:thinknode_g3]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+board_build.psram_type = opi
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_G3
+  -D HAS_UDP_MULTICAST=1
+  -D BOARD_HAS_PSRAM
+  -D PRIVATE_HW
+#  -D CONFIG_ETH_ENABLED=1
+#  -D CONFIG_ETH_USE_ESP32_EMAC=1
+  -I variants/esp32s3/ELECROW-ThinkNode-G3
+  -mfix-esp32-psram-cache-issue
+
+lib_ignore = 
+    Ethernet
+
+lib_deps = 
+  ${esp32s3_base.lib_deps}
+#  file://../ESP32-CH390/ESP32-CH390-1.0.1.tar.gz

variants/esp32s3/ELECROW-ThinkNode-G3/variant.h

@@ -0,0 +1,36 @@
+#define HAS_GPS 0
+#define HAS_WIRE 0
+#define I2C_NO_RESCAN
+
+#define WIFI_LED 5
+#define WIFI_STATE_ON 0
+
+#define LED_PIN 6 // The blue LORA LED
+#define LED_STATE_ON 0
+#define BUTTON_PIN 4 // the external user button of the device, BOOT and RESET are not accessible without opening it up.
+
+#define USE_SX1262
+#define LORA_SCK 42
+#define LORA_MISO 41
+#define LORA_MOSI 40
+#define LORA_CS 39
+#define LORA_RESET 21
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 15
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define PIN_POWER_EN 45
+
+// #define HAS_ETHERNET 1
+// #define USE_CH390D 1 // this driver uses the same stack as the ESP32 Wifi driver
+
+// #define ETH_MISO_PIN 47
+// #define ETH_MOSI_PIN 21
+// #define ETH_SCLK_PIN 48
+// #define ETH_CS_PIN 45
+// #define ETH_INT_PIN 14
+// #define ETH_RST_PIN -1
+// #define ETH_ADDR 1