Deprecate smart gps config -- Always Smart!

.github/actions/setup-base/action.yml

@@ -5,12 +5,17 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
+    - name: Uncomment build epoch
+      shell: bash
+      run: |
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
     - name: Install dependencies
       shell: bash
       run: |
@@ -18,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_esp32.yml

@@ -0,0 +1,42 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build ESP32
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware.bin
+          ota_firmware_target: release/bleota.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,42 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build ESP32-C3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c3-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,42 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build ESP32-C6
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c6-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,42 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build ESP32-S3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-s3.bin
+          ota_firmware_target: release/bleota-s3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32s3-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_firmware.yml

@@ -1,66 +0,0 @@
-name: Build
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      platform:
-        required: true
-        type: string
-      pio_env:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  pio-build:
-    name: build-${{ inputs.platform }}
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Set OTA firmware source and target
-        if: startsWith(inputs.platform, 'esp32')
-        id: ota_dir
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
-            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
-            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32" ]; then
-            echo "src=firmware.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Build ${{ inputs.platform }}
-        id: build
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ inputs.platform }}
-          pio_env: ${{ inputs.pio_env }}
-          pio_target: build
-          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
-          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
-          overwrite: true
-          path: |
-            release/*.bin
-            release/*.elf
-            release/*.uf2
-            release/*.hex
-            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -0,0 +1,42 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build NRF52
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: nrf52
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,40 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: rp2xx0
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/build_stm32.yml

@@ -0,0 +1,41 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      version:
+        required: true
+        type: string
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Build STM32WL
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: stm32wl
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ inputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.bin
+            release/*.elf

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -3,7 +3,7 @@ concurrency:
   group: ci-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 on:
-  # # Triggers the workflow on push but only for the main branches
+  # # Triggers the workflow on push but only for the master branch
   push:
     branches:
       - master
@@ -30,20 +30,11 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
+      - uses: actions/checkout@v4
+      - uses: actions/setup-python@v5
         with:
           python-version: 3.x
           cache: pip
@@ -54,7 +45,7 @@ jobs:
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -65,14 +56,13 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -93,7 +83,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -105,88 +95,70 @@ jobs:
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
+      board: ${{ matrix.board }}
 
-  build-esp32s3:
+  build-esp32-s3:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
+      board: ${{ matrix.board }}
 
-  build-esp32c3:
+  build-esp32-c3:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c3.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
+      board: ${{ matrix.board }}
 
-  build-esp32c6:
+  build-esp32-c6:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c6.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
+      board: ${{ matrix.board }}
 
-  build-nrf52840:
+  build-nrf52:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_nrf52.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
+      board: ${{ matrix.board }}
 
-  build-rp2040:
+  build-rpi2040:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_rpi2040.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
+      board: ${{ matrix.board }}
 
   build-stm32:
     needs: [setup, version]
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_stm32.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      board: ${{ matrix.board }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -258,43 +230,33 @@ jobs:
       push: false
 
   gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
     permissions:
       contents: write
       pull-requests: write
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         version,
         build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-esp32-c6,
+        build-nrf52,
+        build-rpi2040,
         build-stm32,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -323,7 +285,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -368,10 +330,10 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -387,14 +349,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -423,28 +385,20 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -461,7 +415,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -488,18 +442,17 @@ jobs:
     if: ${{ github.event_name == 'workflow_dispatch' }}
     needs: [release-firmware, version]
     env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -1,508 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-env:
-  FAIL_FAST_PER_ARCH: true
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
-
-  build-esp32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v4
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v4
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,14 +24,14 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -1,238 +0,0 @@
-name: Tests
-
-# DISABLED: Changed from automatic PR triggers to manual only
-on:
-  workflow_dispatch:
-    inputs:
-      reason:
-        description: "Reason for manual test run"
-        required: false
-        default: "Manual test execution"
-
-concurrency:
-  group: tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-  pull-requests: write
-
-jobs:
-  native-tests:
-    name: "🧪 Native Tests"
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/test_native.yml
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-
-  test-summary:
-    name: "📊 Test Results"
-    runs-on: ubuntu-latest
-    needs: [native-tests]
-    if: always()
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-      pull-requests: write
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Parse test results and create detailed summary
-        id: test-results
-        run: |
-          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Check overall job status first
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
-            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
-            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          else
-            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Parse detailed test results if available
-          if [ -f "testreport.xml" ]; then
-            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            
-            python3 << 'EOF'
-          import xml.etree.ElementTree as ET
-          import os
-
-          try:
-              tree = ET.parse('testreport.xml')
-              root = tree.getroot()
-              
-              total_tests = 0
-              passed_tests = 0
-              failed_tests = 0
-              skipped_tests = 0
-              
-              # Parse testsuite elements
-              for testsuite in root.findall('.//testsuite'):
-                  suite_name = testsuite.get('name', 'Unknown')
-                  suite_tests = int(testsuite.get('tests', '0'))
-                  suite_failures = int(testsuite.get('failures', '0'))
-                  suite_errors = int(testsuite.get('errors', '0'))
-                  suite_skipped = int(testsuite.get('skipped', '0'))
-                  
-                  total_tests += suite_tests
-                  failed_tests += suite_failures + suite_errors
-                  skipped_tests += suite_skipped
-                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
-                  
-                  if suite_tests > 0:
-                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
-                      print(f"**{status} Test Suite: {suite_name}**")
-                      print(f"- Total: {suite_tests}")
-                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
-                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
-                      if suite_skipped > 0:
-                          print(f"- Skipped: ⏭️ {suite_skipped}")
-                      print("")
-                      
-                      # Show individual test results for failed suites
-                      if suite_failures + suite_errors > 0:
-                          print("**Failed Tests:**")
-                          for testcase in testsuite.findall('testcase'):
-                              test_name = testcase.get('name', 'Unknown')
-                              failure = testcase.find('failure')
-                              error = testcase.find('error')
-                              
-                              if failure is not None:
-                                  msg = failure.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: {msg}")
-                              elif error is not None:
-                                  msg = error.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
-                          print("")
-                      else:
-                          # Show passed tests for successful suites
-                          passed_count = 0
-                          for testcase in testsuite.findall('testcase'):
-                              if testcase.find('failure') is None and testcase.find('error') is None:
-                                  if passed_count < 5:  # Limit to first 5 to avoid spam
-                                      test_name = testcase.get('name', 'Unknown')
-                                      print(f"- ✅ `{test_name}`: PASSED")
-                                  passed_count += 1
-                          if passed_count > 5:
-                              print(f"- ... and {passed_count - 5} more tests passed")
-                          print("")
-              
-              # Summary statistics
-              print("### 📊 Test Statistics")
-              print(f"- **Total Tests**: {total_tests}")
-              print(f"- **Passed**: ✅ {passed_tests}")
-              print(f"- **Failed**: ❌ {failed_tests}")
-              if skipped_tests > 0:
-                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
-              
-              if failed_tests > 0:
-                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
-              else:
-                  print(f"\n✅ **All {total_tests} tests passed!**")
-                  
-          except Exception as e:
-              print(f"❌ Error parsing test results: {e}")
-          EOF
-          else
-            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "---" >> $GITHUB_STEP_SUMMARY
-          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
-
-      - name: Comment test results on PR
-        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const fs = require('fs');
-
-            // Read the step summary to use as PR comment
-            let testSummary = "## 🧪 Test Results Summary\n\n";
-
-            if ("${{ needs.native-tests.result }}" === "success") {
-              testSummary += "✅ **All tests passed!**\n\n";
-            } else if ("${{ needs.native-tests.result }}" === "failure") {
-              testSummary += "❌ **Some tests failed.**\n\n";
-            } else {
-              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
-            }
-
-            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
-            testSummary += "---\n";
-            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
-
-            // Find existing comment
-            const comments = await github.rest.issues.listComments({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-
-            const botComment = comments.data.find(comment => 
-              comment.user.type === 'Bot' && 
-              comment.body.includes('🧪 Test Results Summary')
-            );
-
-            if (botComment) {
-              // Update existing comment
-              await github.rest.issues.updateComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                comment_id: botComment.id,
-                body: testSummary
-              });
-            } else {
-              // Create new comment
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: context.issue.number,
-                body: testSummary
-              });
-            }
-
-      - name: Set overall status
-        run: |
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "All tests passed! ✅"
-            exit 0
-          else
-            echo "Some tests failed! ❌"
-            exit 1
-          fi

.github/workflows/release_channels.yml

@@ -60,10 +60,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,7 +47,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v4
         with:
           node-version: 22
 

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: true
 

.gitignore

@@ -39,14 +39,5 @@ release/
 src/mesh/raspihttp/certificate.pem
 src/mesh/raspihttp/private_key.pem
 
-# pioarduino platform
-managed_components/*
-arduino-lib-builder*
-dependencies.lock
-idf_component.yml
-CMakeLists.txt
-sdkconfig.*
-.dummy/*
-
 # Ignore logo (set at build time with platformio-custom.py)
 data/boot/logo.*

.trunk/trunk.yaml

@@ -1,31 +1,31 @@
 version: 0.1
 cli:
-  version: 1.25.0
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.2
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.471
-    - renovate@41.115.2
+    - checkov@3.2.451
+    - renovate@41.40.0
     - prettier@3.6.2
-    - trufflehog@3.90.6
+    - trufflehog@3.90.1
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.66.0
-    - taplo@0.10.0
-    - ruff@0.13.0
+    - trivy@0.64.1
+    - taplo@0.9.3
+    - ruff@0.12.4
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.13.1
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
-    - shellcheck@0.11.0
+    - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
     - gitleaks@8.28.0

8MB_no_ota.csv

@@ -1,6 +0,0 @@
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x660000,
-spiffs,   data, spiffs,  0x670000,0x180000,
-coredump, data, coredump,0x7F0000,0x10000,

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.13-bookworm AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:trixie-slim
+FROM debian:bookworm-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7t64 libssl3t64 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

arch/esp32/esp32.ini

@@ -52,8 +52,8 @@ lib_deps =
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/mverch67/libpax gitBranch=master
-  https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
   https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/c490bcd019e0658404088a61b96e653c9da22c45.zip
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,6 +17,7 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -31,12 +32,9 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}
-  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -50,7 +50,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   OneButton

bin/build-firmware.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
 export PIP_BREAK_SYSTEM_PACKAGES=1
 
 if (echo $2 | grep -q "esp32"); then
@@ -9,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rp2xx0.sh $1
+  bin/build-rpi2040.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,8 +0,0 @@
-Lora:
-  ### RAK13300in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  spidev: spidev0.1
-  # CS: 7

bin/config.d/lora-RAK6421.yaml

@@ -9,4 +9,13 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/device-install.bat

@@ -7,7 +7,6 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
-SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -15,12 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
@@ -102,6 +100,7 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -121,10 +120,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,15 +164,6 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
-FOR %%a IN (%MUIDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %MUIDB_8MB%.
-        SET "MUIDB8=1"
-        GOTO end_loop_muidb_8mb
-    )
-)
-:end_loop_muidb_8mb
-
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -183,7 +174,6 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -228,12 +218,6 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUIDB 8mb.
-IF %MUIDB8% EQU 1 (
-    SET "OTA_OFFSET=0x5D0000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -5,43 +5,38 @@ BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
-    "crowpanel-esp32s3"
-    "heltec_capsule_sensor_v3"
-    "heltec-v3"
-    "heltec-vision-master-e213"
-    "heltec-vision-master-e290"
-    "heltec-vision-master-t190"
-    "heltec-wireless-paper"
-    "heltec-wireless-tracker"
-    "heltec-wsl-v3"
-    "icarus"
-    "seeed-xiao-s3"
-    "tbeam-s3-core"
-    "tracksenger"
-)
-MUIDB_8MB=(
-    "picomputer-s3"
-    "unphone"
-    "seeed-sensecap-indicator"
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
-    "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
     "t-eth-elite"
-    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -52,7 +47,6 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -112,8 +106,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-        BPS_RESET=true
-        ;;
+		    BPS_RESET=true
+		    ;;
     --) # Stop parsing options
         shift
         break
@@ -127,7 +121,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -164,13 +158,6 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
-    for variant in "${MUIDB_8MB[@]}"; do
-        if [ -z "${FILENAME##*"$variant"*}" ]; then
-            OFFSET=0x670000
-            OTA_OFFSET=0x5D0000
-        fi
-    done
-
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -214,8 +201,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -146,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -1,13 +1,8 @@
-#!/bin/bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -69,7 +64,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -45,28 +45,24 @@ for pio_env in pio_envs:
   all_envs.append(env)
 
 # Filter outputs based on options
-# Check is mutually exclusive with other options (except 'pr')
+# Check is currently mutually exclusive with other options
 if "check" in options:
   for env in all_envs:
     if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
-      else:
-        outlist.append(env['name'])
+      outlist.append(env['name'])
 # Filter (non-check) builds by platform
 else:
   for env in all_envs:
     if options[0] == env['platform']:
-      # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
+      # If no board level is specified, always include it
+      if not env['board_level']:
         outlist.append(env['name'])
-      # Include board_level = 'extra' when requested
+      # Include `extra` boards when requested
       elif "extra" in options and env['board_level'] == "extra":
         outlist.append(env['name'])
-      # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
 
 # Return as a JSON list
-print(json.dumps(outlist))
+if ("quick" in options) and (len(outlist) > 3):
+    print(json.dumps(random.sample(outlist, 3)))
+else:
+    print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,21 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
-    <release version="2.7.7" date="2025-08-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
-    </release>
-    <release version="2.7.6" date="2025-08-12">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
-    </release>
-    <release version="2.7.5" date="2025-08-09">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
-    </release>
     <release version="2.7.4" date="2025-07-19">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
     </release>

bin/platformio-custom.py

@@ -6,8 +6,6 @@ from os.path import join
 import subprocess
 import json
 import re
-import time
-from datetime import datetime
 
 from readprops import readProps
 
@@ -127,16 +125,11 @@ for pref in userPrefs:
         pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
 
 # General options that are passed to the C and C++ compilers
-# Calculate unix epoch for current day (midnight)
-current_date = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
-build_epoch = int(current_date.timestamp())
-
 flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
         "-DAPP_REPO=" + repo_owner,
-        "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
 print ("Using flags:")

boards/heltec_mesh_solar.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x0071"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_solar",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshsolar/",
-  "vendor": "Heltec"
-}

boards/meshtiny.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MeshTiny",
-    "mcu": "nrf52840",
-    "variant": "meshtiny",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "MeshTiny",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://github.com/meshtastic/firmware",
-  "vendor": "MTools Tec"
-}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "partition-table-8MB.csv",
+      "partitions": "default_8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",
@@ -16,7 +16,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "f_boot": "120000000L",
-    "boot_freq": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
     "psram_type": "opi",

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "partition-table-8MB.csv"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.4.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -34,17 +34,4 @@ meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Wed, 03 Sep 2025 23:39:17 +0000
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 19 Jul 2025 11:36:55 +0000

debian/meshtasticd.postinst

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postinst script for meshtasticd
 #
 # see: dh_installdeb(1)

debian/meshtasticd.postrm

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postrm script for meshtasticd
 #
 # see: dh_installdeb(1)

partition-table-8MB.csv

@@ -1,7 +0,0 @@
-# This is a layout for 8MB of flash for MUI devices
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x5C0000,
-flashApp, app,  ota_1,   0x5D0000,0x0A0000,
-spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -53,16 +53,16 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
+	#-DBUILD_EPOCH=$UNIX_TIME
 	#-D OLED_PL=1
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
-	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
-	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	mathertel/OneButton@2.6.1
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -87,9 +87,8 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=mverch67/library/NonBlockingRTTTL
-	https://github.com/mverch67/NonBlockingRTTTL/archive/ad1c2fb12bc81db546c6a94e963acb3382d3689e.zip ; TODO
-
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -100,14 +99,8 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
-
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
+	arcao/Syslog@2.0.0
 
 [radiolib_base]
 lib_deps =
@@ -117,7 +110,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/9ed5355a24059750e9b2eb5d669574d9ea42a37b.zip
+	https://github.com/meshtastic/device-ui/archive/86a09a7360f92d10053fbbf8d74f67f85b0ceb09.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -156,8 +149,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -176,8 +169,6 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -187,7 +178,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
+	adafruit/Adafruit SHTC3 Library@1.0.1
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

src/AmbientLightingThread.h

@@ -183,9 +183,9 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);

src/BluetoothStatus.h

@@ -89,22 +89,14 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, LOW);
-#else
                 digitalWrite(BLE_LED, HIGH);
-#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, HIGH);
-#else
                 digitalWrite(BLE_LED, LOW);
-#endif
 #endif
                 break;
             }

src/DebugConfiguration.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-// Forward declarations
-#if defined(DEBUG_HEAP)
-class MemGet;
-extern MemGet memGet;
-#endif
-
 // DEBUG LED
 #ifndef LED_STATE_ON
 #define LED_STATE_ON 1
@@ -29,7 +23,6 @@ extern MemGet memGet;
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
 #define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
-#define MESHTASTIC_LOG_LEVEL_HEAP "HEAP"
 
 #include "SerialConsole.h"
 
@@ -69,25 +62,6 @@ extern MemGet memGet;
 #endif
 #endif
 
-#if defined(DEBUG_HEAP)
-#define LOG_HEAP(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_HEAP, __VA_ARGS__)
-
-// Macro-based heap debugging
-#define DEBUG_HEAP_BEFORE auto heapBefore = memGet.getFreeHeap();
-#define DEBUG_HEAP_AFTER(context, ptr)                                                                                           \
-    do {                                                                                                                         \
-        auto heapAfter = memGet.getFreeHeap();                                                                                   \
-        if (heapBefore != heapAfter) {                                                                                           \
-            LOG_HEAP("Alloc in %s pointer 0x%x, size: %u, free: %u", context, ptr, heapBefore - heapAfter, heapAfter);           \
-        }                                                                                                                        \
-    } while (0)
-
-#else
-#define LOG_HEAP(...)
-#define DEBUG_HEAP_BEFORE
-#define DEBUG_HEAP_AFTER(context, ptr)
-#endif
-
 /// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
 extern "C" void logLegacy(const char *level, const char *fmt, ...);
 

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                         bool usePreset)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";

src/DisplayFormatters.h

@@ -4,6 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                 bool usePreset);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
 };

src/Power.cpp

@@ -128,7 +128,6 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
-XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -682,8 +681,6 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    } else if (meshSolarInit()) {
-        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -727,12 +724,10 @@ void Power::reboot()
     SPI.end();
     Wire.end();
     Serial1.end();
-    if (screen) {
+    if (screen)
         delete screen;
-        screen = nullptr;
-    }
     LOG_DEBUG("final reboot!");
-    ::reboot();
+    reboot();
 #elif defined(ARCH_STM32WL)
     HAL_NVIC_SystemReset();
 #else
@@ -746,11 +741,7 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
-#ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -768,7 +759,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, true, true);
+    doDeepSleep(DELAY_FOREVER, false, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -833,27 +824,18 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_HEAP(threadlist);
-        LOG_HEAP("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
-                 memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
 #ifdef DEBUG_HEAP_MQTT
@@ -865,19 +847,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
-        char heapTopic[128];
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char heapString[16];
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char wifiString[16];
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
     }
 #endif
 
@@ -1338,6 +1316,7 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
+    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1346,41 +1325,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (PPM == nullptr) {
-            PPM = new XPowersPPM;
-            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (ppm == nullptr) {
+            ppm = new XPowersPPM;
+            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // PPM->setSysPowerDownVoltage(3100);
+                // ppm->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // PPM->setInputCurrentLimit(800);
+                // ppm->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // PPM->disableCurrentLimitPin();
+                // ppm->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                PPM->setChargeTargetVoltage(4288);
+                ppm->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // PPM->setPrechargeCurr(64);
+                // ppm->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                PPM->setChargerConstantCurr(1024);
+                ppm->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                PPM->enableMeasure();
+                ppm->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                PPM->enableCharge();
+                ppm->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete PPM;
-                PPM = nullptr;
+                delete ppm;
+                ppm = nullptr;
                 return false;
             }
         }
@@ -1421,23 +1400,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = PPM->isCharging();
+        bool isCharging = ppm->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!PPM->isVbusIn()) {
+            if (!ppm->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1469,73 +1448,3 @@ bool Power::lipoChargerInit()
     return false;
 }
 #endif
-
-#ifdef HELTEC_MESH_SOLAR
-#include "meshSolarApp.h"
-
-/**
- * meshSolar class for an SMBUS battery sensor.
- */
-class meshSolarBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        meshSolarStart();
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return meshSolarIsCharging(); }
-};
-
-meshSolarBatteryLevel meshSolarLevel;
-
-/**
- * Init the meshSolar battery level sensor
- */
-bool Power::meshSolarInit()
-{
-    bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &meshSolarLevel;
-    return true;
-}
-
-#else
-/**
- * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::meshSolarInit()
-{
-    return false;
-}
-#endif

src/SerialConsole.cpp

@@ -64,14 +64,6 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-#ifdef HELTEC_MESH_SOLAR
-    //After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
-        && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
-    {
-        return 250;
-    }
-#endif
     return runOncePart();
 }
 

src/buzz/buzz.cpp

@@ -140,10 +140,6 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
-
-    if (leadUpNoteIndex >= leadUpNotesCount) {
-        return false; // this was the final note
-    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/concurrency/OSThread.cpp

@@ -86,9 +86,9 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_HEAP("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
 
     runned();

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 
@@ -135,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(SEEED_WIO_TRACKER_L1)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else

src/detect/ScanI2C.h

@@ -79,9 +79,7 @@ class ScanI2C
         BQ27220,
         LTR553ALS,
         BHI260AP,
-        BMM150,
-        TSL2561,
-        DRV2605
+        BMM150
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -184,13 +184,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                // Update RTC EEPROM settings, if necessary
-                if (rtc.readEEPROMRegister(0x35) != 0x07) {
-                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
-                }
-                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
-                    rtc.writeEEPROMRegister(0x37, 0xB4);
-                }
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
                 break;
 #endif
 
@@ -294,7 +289,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = AHT10;
                 break;
 #endif
-#if !defined(M5STACK_UNITC6L)
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -341,7 +335,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
-#endif
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
@@ -463,17 +456,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
@@ -495,14 +478,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
-                    if (registerValue == 0xe0) {
-                        type = DRV2605;
-                        logFoundDevice("DRV2605", (uint8_t)addr.address);
-                    } else {
-                        type = MPR121KB;
-                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                    }
+                    type = MPR121KB;
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
                 }
                 break;
 

src/gps/GPS.cpp

@@ -1,4 +1,5 @@
 #include <cstring> // Include for strstr
+#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -842,6 +843,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+#ifdef GNSS_AIROHA
+        lastFixStartMsec = 0;
+#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -859,7 +863,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
 
@@ -871,7 +877,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
     }
@@ -1054,8 +1062,6 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
-        // Reset the fix quality to 0, since we're off.
-        fixQual = 0;
     }
 }
 
@@ -1115,19 +1121,11 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
-    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1136,7 +1134,8 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
+
+        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1144,15 +1143,9 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
-#ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
-#endif
-        }
+
+        down();
+        shouldPublish = true; // publish our update for this just finished acquisition window
     }
 
     // If state has changed do a publish
@@ -1205,7 +1198,7 @@ static const char *DETECTED_MESSAGE = "%s detected";
         LOG_DEBUG(PROBE_MESSAGE, COMMAND, FAMILY_NAME);                                                                          \
         clearBuffer();                                                                                                           \
         _serial_gps->write(COMMAND "\r\n");                                                                                      \
-        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP, serialSpeed);                                       \
+        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP);                                                    \
         if (detectedDriver != GNSS_MODEL_UNKNOWN) {                                                                              \
             return detectedDriver;                                                                                               \
         }                                                                                                                        \
@@ -1367,55 +1360,36 @@ GnssModel_t GPS::probe(int serialSpeed)
     return GNSS_MODEL_UNKNOWN;
 }
 
-GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed)
+GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    // Calculate buffer size based on baud rate - 256 bytes for 9600 baud as baseline
-    // Higher baud rates get proportionally larger buffers to handle more data
-    int bufferSize = (serialSpeed * 256) / 9600;
-    // Clamp buffer size between reasonable limits
-    if (bufferSize < 128)
-        bufferSize = 128;
-    if (bufferSize > 2048)
-        bufferSize = 2048;
-
-    char *response = new char[bufferSize](); // Dynamically allocate based on baud rate
-    uint16_t responseLen = 0;
+    String response = "";
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            char c = _serial_gps->read();
+            response += (char)_serial_gps->read();
 
-            // Add char to buffer if there's space
-            if (responseLen < bufferSize - 1) {
-                response[responseLen++] = c;
-                response[responseLen] = '\0';
-            }
-
-            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+            if (response.endsWith(",") || response.endsWith("\r\n")) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response);
+                LOG_DEBUG(response.c_str());
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
-                        delete[] response; // Cleanup before return
                         return chipInfo.driver;
                     }
                 }
             }
-            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-                // Reset the response buffer for the next potential message
-                responseLen = 0;
-                response[0] = '\0';
+            if (response.endsWith("\r\n")) {
+                response.trim();
+                response = ""; // Reset the response string for the next potential message
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response);
+    LOG_DEBUG(response.c_str());
 #endif
-    delete[] response;         // Cleanup before return
-    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
+    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
 }
 
 GPS *GPS::createGps()
@@ -1530,10 +1504,28 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've set a new time
+ * @return true if we've acquired a new location
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    if (fix > 0) {
+        if (lastFixStartMsec > 0) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = millis();
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1550,13 +1542,13 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
-                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
-                          t.tm_min, t.tm_sec, ti.age());
-                return true;
-            } else {
-                return false;
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
+                      t.tm_sec, ti.age());
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
+                // Clear the GPS buffer if we got an invalid time
+                clearBuffer();
             }
+            return true;
         } else
             return false;
     } else
@@ -1571,6 +1563,25 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        if (fix > 0) {
+            if (lastFixStartMsec > 0) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = millis();
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -159,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t fixHoldEnds = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 
@@ -236,7 +236,7 @@ class GPS : private concurrency::OSThread
 
     virtual int32_t runOnce() override;
 
-    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed);
+    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap);
 
     // Get GNSS model
     GnssModel_t probe(int serialSpeed);

src/gps/RTC.cpp

@@ -9,9 +9,6 @@
 static RTCQuality currentQuality = RTCQualityNone;
 uint32_t lastSetFromPhoneNtpOrGps = 0;
 
-static uint32_t lastTimeValidationWarning = 0;
-static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
-
 RTCQuality getRTCQuality()
 {
     return currentQuality;
@@ -26,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-RTCSetResult readFromRTC()
+void readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -47,25 +44,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -88,26 +75,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-                lastTimeValidationWarning = millis();
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -116,10 +92,8 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
-        return RTCSetResultSuccess;
     }
 #endif
-    return RTCSetResultNotSet;
 }
 
 /**
@@ -127,7 +101,7 @@ RTCSetResult readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return RTCSetResult
+ * @return True if the RTC was set, false otherwise.
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
@@ -138,20 +112,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv->tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
     }
 #endif
@@ -269,20 +230,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv.tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
     }
 #endif
@@ -342,40 +290,14 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
 time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
-    time_t result = 0;
-
-    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
-    int year = 1900 + tm->tm_year; // tm_year is years since 1900
-    int year_minus_one = year - 1;
-    int days_before_this_year = 0;
-    days_before_this_year += year_minus_one * 365;
-    // leap days: every 4 years, except 100s, but including 400s.
-    days_before_this_year += year_minus_one / 4 - year_minus_one / 100 + year_minus_one / 400;
-    // subtract from 1970-01-01 to get days since epoch
-    days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
-
-    // Now, within this tm->year, compute the days *before* this tm->month starts.
-    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
-
-    // If this is a leap year, and we're past February, add a day:
-    if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
-        days_this_year_before_this_month += 1;
+    setenv("TZ", "GMT0", 1);
+    time_t res = mktime(tm);
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "UTC0", 1);
     }
-
-    // And within this month:
-    int days_this_month_before_today = tm->tm_mday - 1; // tm->tm_mday is 1..31
-
-    // Now combine them all together, and convert days to seconds:
-    result += (days_before_this_year + days_this_year_before_this_month + days_this_month_before_today);
-    result *= 86400L;
-
-    // Finally, add in the hours, minutes, and seconds of today:
-    result += tm->tm_hour * 3600;
-    result += tm->tm_min * 60;
-    result += tm->tm_sec;
-
-    return result;
+    return res;
 #else
     return mktime(tm);
 #endif

src/gps/RTC.h

@@ -48,13 +48,10 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-RTCSetResult readFromRTC();
+void readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
-#ifdef BUILD_EPOCH
-static constexpr uint64_t FORTY_YEARS = (40ULL * 365 * SEC_PER_DAY); // Use 64-bit arithmetic to prevent overflow
-#endif

src/graphics/EInkDisplay2.cpp

@@ -67,28 +67,20 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
-    // HACK for L1 EInk
-#if defined(SEEED_WIO_TRACKER_L1_EINK)
-    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
-    for (uint32_t y = 0; y < displayHeight; y++) {
-        for (uint32_t x = 0; x < displayWidth; x++) {
-            auto b = buffer[x + (y / 8) * displayWidth];
-            auto isset = b & (1 << (y & 7));
-            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
-        }
-    }
-#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
+            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
-#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -148,32 +140,17 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#ifdef ELECROW_ThinkNode_M1
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
 #endif
-        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
-    }
-#elif defined(ELECROW_ThinkNode_M5)
-    {
-        // Start HSPI
-        hspi = new SPIClass(HSPI);
-        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-        adafruitDisplay->init();
-
-        adafruitDisplay->setRotation(4);
-
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -243,7 +220,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#elif defined(HELTEC_MESH_POCKET)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -257,7 +234,6 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 

src/graphics/EInkDisplay2.h

@@ -80,11 +80,11 @@ class EInkDisplay : public OLEDDisplay
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
     defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(HELTEC_MESH_POCKET)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/Screen.cpp

@@ -317,16 +317,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_SPISSD1306)
-    dispdev = new SSD1306Spi(SSD1306_RESET, SSD1306_RS, SSD1306_NSS, GEOMETRY_64_48);
-    if (!dispdev->init()) {
-        LOG_DEBUG("Error: SSD1306 not detected!");
-    } else {
-        static_cast<SSD1306Spi *>(dispdev)->setHorizontalOffset(32);
-        LOG_INFO("SSD1306 init success");
-    }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -373,6 +365,9 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
+#ifdef PIN_EINK_EN
+    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
+#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -396,14 +391,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             dispdev->displayOn();
 #endif
 
-#ifdef PIN_EINK_EN
-            if (uiconfig.screen_brightness == 1)
-                digitalWrite(PIN_EINK_EN, HIGH);
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-#endif
-
 #if defined(ST7789_CS) &&                                                                                                        \
     !defined(M5STACK) // set display brightness when turning on screens. Just moved function from TFTDisplay to here.
             static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
@@ -433,13 +420,11 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-
-#ifdef PIN_EINK_EN
-            digitalWrite(PIN_EINK_EN, LOW);
-#elif defined(PCA_PIN_EINK_EN)
-            io.digitalWrite(PCA_PIN_EINK_EN, LOW);
+#ifdef ELECROW_ThinkNode_M1
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
+                digitalWrite(PIN_EINK_EN, LOW);
+            }
 #endif
-
             dispdev->displayOff();
 #ifdef USE_ST7789
             SPI1.end();
@@ -515,7 +500,7 @@ void Screen::setup()
     // === Apply loaded brightness ===
 #if defined(ST7789_CS)
     static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
-#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SPISSD1306)
+#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
     dispdev->setBrightness(brightness);
 #endif
     LOG_INFO("Applied screen brightness: %d", brightness);
@@ -558,11 +543,11 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif !defined(M5STACK_UNITC6L)
+#else
         dispdev->flipScreenVertically();
 #endif
     }
@@ -700,11 +685,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-#if defined(M5STACK_UNITC6L)
-        menuHandler::LoraRegionPicker();
-#else
-        menuHandler::OnboardMessage();
-#endif
+        menuHandler::LoraRegionPicker(0);
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
@@ -902,12 +883,8 @@ void Screen::setFrames(FrameFocus focus)
 
 #if defined(DISPLAY_CLOCK_FRAME)
     fsi.positions.clock = numframes;
-#if defined(M5STACK_UNITC6L)
-    normalFrames[numframes++] = graphics::ClockRenderer::drawAnalogClockFrame;
-#else
     normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
                                                              : graphics::ClockRenderer::drawDigitalClockFrame;
-#endif
     indicatorIcons.push_back(digital_icon_clock);
 #endif
 
@@ -1242,10 +1219,6 @@ void Screen::handleShowNextFrame()
 
 void Screen::setFastFramerate()
 {
-#if defined(M5STACK_UNITC6L)
-    dispdev->clear();
-    dispdev->display();
-#endif
     // We are about to start a transition so speed up fps
     targetFramerate = SCREEN_TRANSITION_FRAMERATE;
 
@@ -1291,49 +1264,40 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             if (shouldWakeOnReceivedMessage()) {
                 setOn(true);    // Wake up the screen first
                 forceDisplay(); // Forces screen redraw
-            }
-            // === Prepare banner content ===
-            const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
-            const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
-            const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
+                // === Prepare banner content ===
+                const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
+                const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
-            char banner[256];
+                const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
 
-            // Check for bell character in message to determine alert type
-            bool isAlert = false;
-            for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
-                if (msgRaw[i] == '\x07') {
-                    isAlert = true;
-                    break;
+                char banner[256];
+
+                // Check for bell character in message to determine alert type
+                bool isAlert = false;
+                for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
+                    if (msgRaw[i] == '\x07') {
+                        isAlert = true;
+                        break;
+                    }
                 }
-            }
 
-            if (isAlert) {
-                if (longName && longName[0]) {
-                    snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
+                if (isAlert) {
+                    if (longName && longName[0]) {
+                        snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
+                    } else {
+                        strcpy(banner, "Alert Received");
+                    }
                 } else {
-                    strcpy(banner, "Alert Received");
+                    if (longName && longName[0]) {
+                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+                    } else {
+                        strcpy(banner, "New Message");
+                    }
                 }
-            } else {
-                if (longName && longName[0]) {
-#if defined(M5STACK_UNITC6L)
-                    strcpy(banner, "New Message");
-#else
-                    snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
-#endif
 
-                } else {
-                    strcpy(banner, "New Message");
-                }
+                screen->showSimpleBanner(banner, 3000);
             }
-#if defined(M5STACK_UNITC6L)
-            screen->setOn(true);
-            screen->showSimpleBanner(banner, 1500);
-            playLongBeep();
-#else
-            screen->showSimpleBanner(banner, 3000);
-#endif
         }
     }
 
@@ -1416,11 +1380,7 @@ int Screen::handleInputEvent(const InputEvent *event)
                     if (devicestate.rx_text_message.from) {
                         menuHandler::messageResponseMenu();
                     } else {
-#if defined(M5STACK_UNITC6L)
-                        menuHandler::textMessageMenu();
-#else
                         menuHandler::textMessageBaseMenu();
-#endif
                     }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&

src/graphics/Screen.h

@@ -81,8 +81,6 @@ class Screen
 #include <SSD1306Wire.h>
 #elif defined(USE_ST7789)
 #include <ST7789Spi.h>
-#elif defined(USE_SPISSD1306)
-#include <SSD1306Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#ifdef CROWPANEL_ESP32S3_5_EPAPER
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,9 +40,6 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
-#ifdef OLED_RU
-#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
-#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -53,13 +50,9 @@
 #endif
 #endif
 #endif
-#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
-#ifdef OLED_RU
-#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
-#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -70,26 +63,21 @@
 #endif
 #endif
 #endif
-#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28
 #define FONT_LARGE FONT_LARGE_LOCAL  // Height: 28
-#elif defined(M5STACK_UNITC6L)
-#define FONT_SMALL FONT_SMALL_LOCAL  // Height: 13
-#define FONT_MEDIUM FONT_SMALL_LOCAL // Height: 13
-#define FONT_LARGE FONT_SMALL_LOCAL  // Height: 13
 #else
 #define FONT_SMALL FONT_SMALL_LOCAL   // Height: 13
 #define FONT_MEDIUM FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/SharedUIDisplay.cpp

@@ -124,7 +124,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
 
     int batteryX = 1;
     int batteryY = HEADER_OFFSET_Y + 1;
-#if !defined(M5STACK_UNITC6L)
+
     // === Battery Icons ===
     if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
         batteryX += 1;
@@ -337,7 +337,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             }
         }
     }
-#endif
+
     display->setColor(WHITE); // Reset for other UI
 }
 

src/graphics/TFTDisplay.cpp

@@ -562,91 +562,6 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
-#elif defined(ST7796_CS)
-#include <LovyanGFX.hpp> // Graphics and font library for ST7796 driver chip
-
-class LGFX : public lgfx::LGFX_Device
-{
-    lgfx::Panel_ST7796 _panel_instance;
-    lgfx::Bus_SPI _bus_instance;
-    lgfx::Light_PWM _light_instance;
-
-  public:
-    LGFX(void)
-    {
-        {
-            auto cfg = _bus_instance.config();
-
-            // SPI
-            cfg.spi_host = ST7796_SPI_HOST;
-            cfg.spi_mode = 0;
-            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
-                                            // 80MHz by an integer)
-            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
-            cfg.spi_3wire = false;
-            cfg.use_lock = true;               // Set to true to use transaction locking
-            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
-                                               // SPI_DMA_CH_AUTO=auto setting)
-            cfg.pin_sclk = ST7796_SCK;         // Set SPI SCLK pin number
-            cfg.pin_mosi = ST7796_SDA;         // Set SPI MOSI pin number
-            cfg.pin_miso = ST7796_MISO;        // Set SPI MISO pin number (-1 = disable)
-            cfg.pin_dc = ST7796_RS;            // Set SPI DC pin number (-1 = disable)
-
-            _bus_instance.config(cfg);              // applies the set value to the bus.
-            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
-        }
-
-        {                                        // Set the display panel control.
-            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
-
-            cfg.pin_cs = ST7796_CS;     // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7796_RESET; // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7796_BUSY; // Pin number where BUSY is connected (-1 = disable)
-
-            // cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
-            // cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
-            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
-            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
-            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
-            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
-            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
-#ifdef TFT_DUMMY_READ_PIXELS
-            cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
-#else
-            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
-#endif
-            cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
-            cfg.readable = true;                          // Set to true if data can be read
-            cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
-            cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
-            cfg.dlen_16bit =
-                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
-            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
-
-            _panel_instance.config(cfg);
-        }
-
-#ifdef ST7796_BL
-        // Set the backlight control. (delete if not necessary)
-        {
-            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
-
-            cfg.pin_bl = ST7796_BL; // Pin number to which the backlight is connected
-            cfg.invert = false;     // true to invert the brightness of the backlight
-            cfg.freq = 44100;
-            cfg.pwm_channel = 7;
-
-            _light_instance.config(cfg);
-            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
-        }
-#endif
-
-        setPanel(&_panel_instance); // Sets the panel to use.
-    }
-};
-
-static LGFX *tft = nullptr;
-
 #elif defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER)
 
 #include <LovyanGFX.hpp> // Graphics and font library for ILI9341/ILI9342 driver chip
@@ -752,19 +667,15 @@ static LGFX *tft = nullptr;
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#if defined(LGFX_SDL)
-#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
-#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
+    lgfx::Panel_Device *_panel_instance;
     lgfx::Bus_SPI _bus_instance;
 
     lgfx::ITouch *_touch_instance;
 
   public:
-    lgfx::Panel_Device *_panel_instance;
-
     LGFX(void)
     {
         if (settingsMap[displayPanel] == st7789)
@@ -783,11 +694,6 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9488;
         else if (settingsMap[displayPanel] == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
-#if defined(LGFX_SDL)
-        else if (settingsMap[displayPanel] == x11) {
-            _panel_instance = new lgfx::Panel_sdl;
-        }
-#endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
             LOG_ERROR("Unknown display panel configured!");
@@ -848,13 +754,7 @@ class LGFX : public lgfx::LGFX_Device
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-#if defined(LGFX_SDL)
-        if (settingsMap[displayPanel] == x11) {
-            lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
-            sdl_panel_->setup();
-            sdl_panel_->addKeyCodeMapping(SDLK_RETURN, SDL_SCANCODE_KP_ENTER);
-        }
-#endif
+
         setPanel(_panel_instance); // Sets the panel to use.
     }
 };
@@ -949,29 +849,9 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
-class PanelInit_ST7701 : public lgfx::Panel_ST7701
-{
-  public:
-    const uint8_t *getInitCommands(uint8_t listno) const override
-    {
-        // 180 degree hw rotation: vertical flip, horizontal flip
-        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
-                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
-                                                  0xFF, 0xFF};
-        switch (listno) {
-        case 1:
-            return list1;
-        default:
-            return lgfx::Panel_ST7701::getInitCommands(listno);
-        }
-    }
-};
-
 class LGFX : public lgfx::LGFX_Device
 {
-    PanelInit_ST7701 _panel_instance;
+    lgfx::Panel_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -1082,9 +962,8 @@ static LGFX *tft = nullptr;
 
 #endif
 
-#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
-    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||      \
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1128,154 +1007,37 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
-TFTDisplay::~TFTDisplay()
-{
-    // Clean up allocated line pixel buffer to prevent memory leak
-    if (linePixelBuffer != nullptr) {
-        free(linePixelBuffer);
-        linePixelBuffer = nullptr;
-    }
-}
-
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
         tft->fillScreen(TFT_BLACK);
-
+    // tft->clear();
     concurrency::LockGuard g(spiLock);
 
-    uint32_t x, y;
-    uint32_t y_byteIndex;
-    uint8_t y_byteMask;
-    uint32_t x_FirstPixelUpdate;
-    uint32_t x_LastPixelUpdate;
-    bool isset, dblbuf_isset;
-    uint16_t colorTftMesh, colorTftBlack;
-    bool somethingChanged = false;
+    uint16_t x, y;
 
-    // Store colors byte-reversed so that TFT_eSPI doesn't have to swap bytes in a separate step
-    colorTftMesh = (TFT_MESH >> 8) | ((TFT_MESH & 0xFF) << 8);
-    colorTftBlack = (TFT_BLACK >> 8) | ((TFT_BLACK & 0xFF) << 8);
-
-    y = 0;
-    while (y < displayHeight) {
-        y_byteIndex = (y / 8) * displayWidth;
-        y_byteMask = (1 << (y & 7));
-
-        // Step 1: Do a quick scan of 8 rows together. This allows fast-forwarding over unchanged screen areas.
-        if (y_byteMask == 1) {
+    for (y = 0; y < displayHeight; y++) {
+        for (x = 0; x < displayWidth; x++) {
+            auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
             if (!fromBlank) {
-                for (x = 0; x < displayWidth; x++) {
-                    if (buffer[x + y_byteIndex] != buffer_back[x + y_byteIndex])
-                        break;
-                }
-            } else {
-                for (x = 0; x < displayWidth; x++) {
-                    if (buffer[x + y_byteIndex] != 0)
-                        break;
-                }
-            }
-            if (x >= displayWidth) {
-                // No changed pixels found in these 8 rows, fast-forward to the next 8
-                y = y + 8;
-                continue;
-            }
-        }
-
-        // Step 2: Scan each of the 8 rows individually. Find the first pixel in each row that needs updating
-        for (x_FirstPixelUpdate = 0; x_FirstPixelUpdate < displayWidth; x_FirstPixelUpdate++) {
-            isset = buffer[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
-
-            if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses
-                dblbuf_isset = buffer_back[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
+                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
                 if (isset != dblbuf_isset) {
-                    break;
+                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
                 }
             } else if (isset) {
-                break;
+                tft->drawPixel(x, y, TFT_MESH);
             }
         }
-
-        // Did we find a pixel that needs updating on this row?
-        if (x_FirstPixelUpdate < displayWidth) {
-
-            // Quickly write out the first changed pixel (saves another array lookup)
-            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
-            x_LastPixelUpdate = x_FirstPixelUpdate;
-
-            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating
-            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
-                isset = buffer[x + y_byteIndex] & y_byteMask;
-                linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
-
-                if (!fromBlank) {
-                    dblbuf_isset = buffer_back[x + y_byteIndex] & y_byteMask;
-                    if (isset != dblbuf_isset) {
-                        x_LastPixelUpdate = x;
-                    }
-                } else if (isset) {
-                    x_LastPixelUpdate = x;
-                }
-            }
-
-            // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
-            // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
-            tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
-                          &linePixelBuffer[x_FirstPixelUpdate]);
-
-            somethingChanged = true;
-        }
-        y++;
     }
     // Copy the Buffer to the Back Buffer
-    if (somethingChanged)
-        memcpy(buffer_back, buffer, displayBufferSize);
-}
-
-void TFTDisplay::sdlLoop()
-{
-#if defined(LGFX_SDL)
-    static int lastPressed = 0;
-    static int shuttingDown = false;
-    if (settingsMap[displayPanel] == x11) {
-        lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)tft->_panel_instance;
-        if (sdl_panel_->loop() && !shuttingDown) {
-            LOG_WARN("Window Closed!");
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        }
-
-        // debounce
-        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
-            return;
-        if (!lgfx::v1::gpio_in(37)) {
-            lastPressed = 37;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(36)) {
-            lastPressed = 36;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(38)) {
-            lastPressed = 38;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(39)) {
-            lastPressed = 39;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
-            lastPressed = SDL_SCANCODE_KP_ENTER;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else {
-            lastPressed = 0;
+    for (y = 0; y < (displayHeight / 8); y++) {
+        for (x = 0; x < displayWidth; x++) {
+            uint16_t pos = x + y * displayWidth;
+            buffer_back[pos] = buffer[pos];
         }
     }
-#endif
 }
 
 // Send a command to the display (low level function)
@@ -1422,23 +1184,15 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
+#elif ARCH_PORTDUINO
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft->fillScreen(TFT_BLACK);
 
-    if (this->linePixelBuffer == NULL) {
-        this->linePixelBuffer = (uint16_t *)malloc(sizeof(uint16_t) * displayWidth);
-
-        if (!this->linePixelBuffer) {
-            LOG_ERROR("Not enough memory to create TFT line buffer\n");
-            return false;
-        }
-    }
     return true;
 }
 

src/graphics/TFTDisplay.h

@@ -20,13 +20,9 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
-    // Destructor to clean up allocated memory
-    ~TFTDisplay();
-
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);
-    void sdlLoop();
 
     // Turn the display upside down
     virtual void flipScreenVertically();
@@ -61,6 +57,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-
-    uint16_t *linePixelBuffer = nullptr;
 };

src/graphics/draw/DebugRenderer.cpp

@@ -94,8 +94,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -107,7 +106,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -122,8 +121,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -263,6 +261,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
+    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
+
+    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    //    if (config.display.heading_bold)
+    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
+
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -277,13 +281,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
 
     // Line 1 (Still)
-#if !defined(M5STACK_UNITC6L)
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
     if (config.display.heading_bold)
         display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
 
     display->setColor(WHITE);
-#endif
+
     // Setup string to assemble analogClock string
     std::string analogClock = "";
 
@@ -387,24 +390,17 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     char shortnameble[35];
     getMacAddr(dmac);
     snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
-#if defined(M5STACK_UNITC6L)
-    snprintf(shortnameble, sizeof(shortnameble), "%s", screen->ourId);
-#else
     snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
-#endif
     int textWidth = display->getStringWidth(shortnameble);
     int nameX = (SCREEN_WIDTH - textWidth);
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
+
     // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {
-#if defined(M5STACK_UNITC6L)
-        snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
-#else
         snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
-#endif
     }
     textWidth = display->getStringWidth(regionradiopreset);
     nameX = (SCREEN_WIDTH - textWidth) / 2;
@@ -416,17 +412,9 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     float freq = RadioLibInterface::instance->getFreq();
     snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
     if (config.lora.channel_num == 0) {
-#if defined(M5STACK_UNITC6L)
-        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz", freqStr);
-#else
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
-#endif
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
     } else {
-#if defined(M5STACK_UNITC6L)
-        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
-#else
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
-#endif
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
     }
     size_t len = strlen(frequencyslot);
     if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
@@ -436,7 +424,6 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
 
-#if !defined(M5STACK_UNITC6L)
     // === Fourth Row: Channel Utilization ===
     const char *chUtil = "ChUtil:";
     char chUtilPercentage[10];
@@ -493,7 +480,6 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 
     display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[4],
                         chUtilPercentage);
-#endif
 }
 
 // ****************************
@@ -519,11 +505,8 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 #ifdef USE_EINK
     barsOffset -= 12;
 #endif
-#if defined(M5STACK_UNITC6L)
-    const int barX = x + 45 + barsOffset;
-#else
     const int barX = x + 40 + barsOffset;
-#endif
+
     auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
         if (total == 0)
             return;
@@ -548,7 +531,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         // Label
         display->setTextAlignment(TEXT_ALIGN_LEFT);
         display->drawString(labelX, getTextPositions(display)[line], label);
-#if !defined(M5STACK_UNITC6L)
+
         // Bar
         int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
         display->setColor(WHITE);
@@ -556,7 +539,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 
         display->fillRect(barX, barY, fillWidth, barHeight);
         display->setColor(WHITE);
-#endif
+
         // Value string
         display->setTextAlignment(TEXT_ALIGN_RIGHT);
         display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
@@ -609,16 +592,10 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         line += 1;
     }
     line += 1;
-
     char appversionstr[35];
     snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
     char appversionstr_formatted[40];
     char *lastDot = strrchr(appversionstr, '.');
-#if defined(M5STACK_UNITC6L)
-    if (lastDot != nullptr) {
-        *lastDot = '\0'; // truncate string
-    }
-#else
     if (lastDot) {
         size_t prefixLen = lastDot - appversionstr;
         strncpy(appversionstr_formatted, appversionstr, prefixLen);
@@ -629,12 +606,10 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
         appversionstr[sizeof(appversionstr) - 1] = '\0';
     }
-#endif
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
-
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-#if !defined(M5STACK_UNITC6L)
+
     if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
         line += 1;
         char uptimeStr[32] = "";
@@ -653,7 +628,6 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
     }
-#endif
 }
 } // namespace DebugRenderer
 } // namespace graphics

src/graphics/draw/MenuHandler.cpp

@@ -15,9 +15,6 @@
 #include "modules/CannedMessageModule.h"
 #include "modules/KeyVerificationModule.h"
 
-#include "modules/TraceRouteModule.h"
-#include <functional>
-
 extern uint16_t TFT_MESH;
 
 namespace graphics
@@ -26,27 +23,6 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
-void menuHandler::OnboardMessage()
-{
-    static const char *optionsArray[] = {"OK", "Got it!"};
-    enum optionsNumbers { OK, got };
-    BannerOverlayOptions bannerOptions;
-#if HAS_TFT
-    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
-#elif defined(BUTTON_PIN)
-    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
-#else
-    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
-#endif
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
-        screen->runNow();
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -75,18 +51,12 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "PH_915",
                                          "ANZ_433",
                                          "KZ_433",
-                                         "KZ_863",
-                                         "NP_865",
-                                         "BR_902"};
+                                         "KZ_863"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "LoRa Region";
-#else
     bannerOptions.message = "Set the LoRa region";
-#endif
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 27;
+    bannerOptions.optionsCount = 25;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -145,22 +115,6 @@ void menuHandler::TwelveHourPicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
-// Reusable confirmation prompt function
-void menuHandler::showConfirmationBanner(const char *message, std::function<void()> onConfirm)
-{
-    static const char *confirmOptions[] = {"No", "Yes"};
-    BannerOverlayOptions confirmBanner;
-    confirmBanner.message = message;
-    confirmBanner.optionsArrayPtr = confirmOptions;
-    confirmBanner.optionsCount = 2;
-    confirmBanner.bannerCallback = [onConfirm](int confirmSelected) -> void {
-        if (confirmSelected == 1) {
-            onConfirm();
-        }
-    };
-    screen->showOverlayBanner(confirmBanner);
-}
-
 void menuHandler::ClockFacePicker()
 {
     static const char *optionsArray[] = {"Back", "Digital", "Analog"};
@@ -197,7 +151,6 @@ void menuHandler::TZPicker()
                                          "US/Mountain",
                                          "US/Central",
                                          "US/Eastern",
-                                         "BR/Brasilia",
                                          "UTC",
                                          "EU/Western",
                                          "EU/"
@@ -212,7 +165,7 @@ void menuHandler::TZPicker()
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Pick Timezone";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 19;
+    bannerOptions.optionsCount = 17;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 0) {
             menuHandler::menuQueue = menuHandler::clock_menu;
@@ -231,27 +184,25 @@ void menuHandler::TZPicker()
             strncpy(config.device.tzdef, "CST6CDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
         } else if (selected == 7) { // Eastern
             strncpy(config.device.tzdef, "EST5EDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
-        } else if (selected == 8) { // Brazil
-            strncpy(config.device.tzdef, "BRT3", sizeof(config.device.tzdef));
-        } else if (selected == 9) { // UTC
-            strncpy(config.device.tzdef, "UTC0", sizeof(config.device.tzdef));
-        } else if (selected == 10) { // EU/Western
+        } else if (selected == 8) { // UTC
+            strncpy(config.device.tzdef, "UTC", sizeof(config.device.tzdef));
+        } else if (selected == 9) { // EU/Western
             strncpy(config.device.tzdef, "GMT0BST,M3.5.0/1,M10.5.0", sizeof(config.device.tzdef));
-        } else if (selected == 11) { // EU/Central
+        } else if (selected == 10) { // EU/Central
             strncpy(config.device.tzdef, "CET-1CEST,M3.5.0,M10.5.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 12) { // EU/Eastern
+        } else if (selected == 11) { // EU/Eastern
             strncpy(config.device.tzdef, "EET-2EEST,M3.5.0/3,M10.5.0/4", sizeof(config.device.tzdef));
-        } else if (selected == 13) { // Asia/Kolkata
+        } else if (selected == 12) { // Asia/Kolkata
             strncpy(config.device.tzdef, "IST-5:30", sizeof(config.device.tzdef));
-        } else if (selected == 14) { // China
+        } else if (selected == 13) { // China
             strncpy(config.device.tzdef, "HKT-8", sizeof(config.device.tzdef));
-        } else if (selected == 15) { // AU/AWST
+        } else if (selected == 14) { // AU/AWST
             strncpy(config.device.tzdef, "AWST-8", sizeof(config.device.tzdef));
-        } else if (selected == 16) { // AU/ACST
+        } else if (selected == 15) { // AU/ACST
             strncpy(config.device.tzdef, "ACST-9:30ACDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 17) { // AU/AEST
+        } else if (selected == 16) { // AU/AEST
             strncpy(config.device.tzdef, "AEST-10AEDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 18) { // NZ
+        } else if (selected == 17) { // NZ
             strncpy(config.device.tzdef, "NZST-12NZDT,M9.5.0,M4.1.0/3", sizeof(config.device.tzdef));
         }
         if (selected != 0) {
@@ -264,11 +215,7 @@ void menuHandler::TZPicker()
 
 void menuHandler::clockMenu()
 {
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[] = {"Back", "Time Format", "Timezone"};
-#else
     static const char *optionsArray[] = {"Back", "Clock Face", "Time Format", "Timezone"};
-#endif
     enum optionsNumbers { Back = 0, Clock = 1, Time = 2, Timezone = 3 };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Clock Action";
@@ -292,11 +239,8 @@ void menuHandler::clockMenu()
 void menuHandler::messageResponseMenu()
 {
     enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3, Aloud = 4, enumEnd = 5 };
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply Preset"};
-#else
+
     static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply via Preset"};
-#endif
     static int optionsEnumArray[enumEnd] = {Back, Dismiss, Preset};
     int options = 3;
 
@@ -310,11 +254,7 @@ void menuHandler::messageResponseMenu()
     optionsEnumArray[options++] = Aloud;
 #endif
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Message";
-#else
     bannerOptions.message = "Message Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
@@ -348,13 +288,13 @@ void menuHandler::messageResponseMenu()
 
 void menuHandler::homeBaseMenu()
 {
-    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Sleep, enumEnd };
+    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep, enumEnd };
 
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
+#ifdef PIN_EINK_EN
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
@@ -364,46 +304,28 @@ void menuHandler::homeBaseMenu()
 
     optionsArray[options] = "Send Position";
     optionsEnumArray[options++] = Position;
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "New Preset";
-#else
     optionsArray[options] = "New Preset Msg";
-#endif
     optionsEnumArray[options++] = Preset;
     if (kb_found) {
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
+    optionsArray[options] = "Bluetooth Toggle";
+    optionsEnumArray[options++] = Bluetooth;
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Home";
-#else
     bannerOptions.message = "Home Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#if defined(PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
-                uiconfig.screen_brightness = 0;
+#ifdef PIN_EINK_EN
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
-                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
-            saveUIConfig();
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
-                uiconfig.screen_brightness = 0;
-                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
-            } else {
-                uiconfig.screen_brightness = 1;
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-            }
-            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -414,16 +336,14 @@ void menuHandler::homeBaseMenu()
             cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
         } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
+        } else if (selected == Bluetooth) {
+            menuQueue = bluetooth_toggle_menu;
+            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::textMessageMenu()
-{
-    cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-}
-
 void menuHandler::textMessageBaseMenu()
 {
     enum optionsNumbers { Back, Preset, Freetext, enumEnd };
@@ -455,29 +375,20 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) ||             \
+    defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Screen Options";
     optionsEnumArray[options++] = ScreenOptions;
 #endif
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Bluetooth";
-#else
-    optionsArray[options] = "Bluetooth Toggle";
-#endif
-    optionsEnumArray[options++] = Bluetooth;
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Power";
-#else
+
     optionsArray[options] = "Reboot/Shutdown";
-#endif
     optionsEnumArray[options++] = PowerMenu;
 
     if (test_enabled) {
@@ -486,11 +397,7 @@ void menuHandler::systemBaseMenu()
     }
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "System";
-#else
     bannerOptions.message = "System Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -507,9 +414,6 @@ void menuHandler::systemBaseMenu()
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
-        } else if (selected == Bluetooth) {
-            menuQueue = bluetooth_toggle_menu;
-            screen->runNow();
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -522,12 +426,8 @@ void menuHandler::systemBaseMenu()
 
 void menuHandler::favoriteBaseMenu()
 {
-    enum optionsNumbers { Back, Preset, Freetext, Remove, TraceRoute, enumEnd };
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[enumEnd] = {"Back", "New Preset"};
-#else
+    enum optionsNumbers { Back, Preset, Freetext, Remove, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back", "New Preset Msg"};
-#endif
     static int optionsEnumArray[enumEnd] = {Back, Preset};
     int options = 2;
 
@@ -535,19 +435,11 @@ void menuHandler::favoriteBaseMenu()
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
-#if !defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Trace Route";
-    optionsEnumArray[options++] = TraceRoute;
-#endif
     optionsArray[options] = "Remove Favorite";
     optionsEnumArray[options++] = Remove;
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Favorites";
-#else
     bannerOptions.message = "Favorites Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
@@ -559,10 +451,6 @@ void menuHandler::favoriteBaseMenu()
         } else if (selected == Remove) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            if (traceRouteModule) {
-                traceRouteModule->launch(graphics::UIRenderer::currentFavoriteNodeNum);
-            }
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -576,12 +464,10 @@ void menuHandler::positionBaseMenu()
     static int optionsEnumArray[enumEnd] = {Back, GPSToggle, CompassMenu};
     int options = 3;
 
-#if !MESHTASTIC_EXCLUDE_I2C
     if (accelerometerThread) {
         optionsArray[options] = "Compass Calibrate";
         optionsEnumArray[options++] = CompassCalibrate;
     }
-#endif
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Position Action";
     bannerOptions.optionsArrayPtr = optionsArray;
@@ -594,10 +480,8 @@ void menuHandler::positionBaseMenu()
         } else if (selected == CompassMenu) {
             menuQueue = compass_point_north_menu;
             screen->runNow();
-#if !MESHTASTIC_EXCLUDE_I2C
         } else if (selected == CompassCalibrate) {
             accelerometerThread->calibrate(30);
-#endif
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -605,20 +489,12 @@ void menuHandler::positionBaseMenu()
 
 void menuHandler::nodeListMenu()
 {
-    enum optionsNumbers { Back, Favorite, TraceRoute, Verify, Reset, enumEnd };
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Reset Node"};
-#else
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Trace Route", "Key Verification", "Reset NodeDB"};
-#endif
+    enum optionsNumbers { Back, Favorite, Verify, Reset };
+    static const char *optionsArray[] = {"Back", "Add Favorite", "Key Verification", "Reset NodeDB"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Node Action";
     bannerOptions.optionsArrayPtr = optionsArray;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.optionsCount = 3;
-#else
-    bannerOptions.optionsCount = 5;
-#endif
+    bannerOptions.optionsCount = 4;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Favorite) {
             menuQueue = add_favorite;
@@ -629,9 +505,6 @@ void menuHandler::nodeListMenu()
         } else if (selected == Reset) {
             menuQueue = reset_node_db_menu;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            menuQueue = trace_route_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -725,11 +598,7 @@ void menuHandler::BluetoothToggleMenu()
 {
     static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Bluetooth";
-#else
     bannerOptions.message = "Toggle Bluetooth";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -789,7 +658,7 @@ void menuHandler::BrightnessPickerMenu()
 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
             // For HELTEC devices, use analogWrite to control backlight
             analogWrite(VTFT_LEDA, uiconfig.screen_brightness);
-#elif defined(ST7789_CS) || defined(ST7796_CS)
+#elif defined(ST7789_CS)
             static_cast<TFTDisplay *>(screen->getDisplayDevice())->setDisplayBrightness(uiconfig.screen_brightness);
 #elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
             screen->getDisplayDevice()->setBrightness(uiconfig.screen_brightness);
@@ -832,7 +701,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -921,11 +790,7 @@ void menuHandler::rebootMenu()
 {
     static const char *optionsArray[] = {"Back", "Confirm"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Reboot";
-#else
     bannerOptions.message = "Reboot Device?";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -945,11 +810,7 @@ void menuHandler::shutdownMenu()
 {
     static const char *optionsArray[] = {"Back", "Confirm"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Shutdown";
-#else
     bannerOptions.message = "Shutdown Device?";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -966,12 +827,7 @@ void menuHandler::shutdownMenu()
 
 void menuHandler::addFavoriteMenu()
 {
-#if defined(M5STACK_UNITC6L)
-    screen->showNodePicker("Node Favorite", 30000, [](uint32_t nodenum) -> void {
-#else
     screen->showNodePicker("Node To Favorite", 30000, [](uint32_t nodenum) -> void {
-
-#endif
         LOG_WARN("Nodenum: %u", nodenum);
         nodeDB->set_favorite(true, nodenum);
         screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
@@ -1001,16 +857,6 @@ void menuHandler::removeFavoriteMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::traceRouteMenu()
-{
-    screen->showNodePicker("Node to Trace", 30000, [](uint32_t nodenum) -> void {
-        LOG_INFO("Menu: Node picker selected node 0x%08x, traceRouteModule=%p", nodenum, traceRouteModule);
-        if (traceRouteModule) {
-            traceRouteModule->startTraceRoute(nodenum);
-        }
-    });
-}
-
 void menuHandler::testMenu()
 {
 
@@ -1122,7 +968,7 @@ void menuHandler::screenOptionsMenu()
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
@@ -1167,11 +1013,7 @@ void menuHandler::powerMenu()
 #endif
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Power";
-#else
     bannerOptions.message = "Reboot / Shutdown";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1234,9 +1076,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case lora_picker:
         LoraRegionPicker();
         break;
-    case no_timeout_lora_picker:
-        LoraRegionPicker(0);
-        break;
     case TZ_picker:
         TZPicker();
         break;
@@ -1290,9 +1129,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case remove_favorite:
         removeFavoriteMenu();
         break;
-    case trace_route_menu:
-        traceRouteMenu();
-        break;
     case test_menu:
         testMenu();
         break;

src/graphics/draw/MenuHandler.h

@@ -10,7 +10,6 @@ class menuHandler
     enum screenMenus {
         menu_none,
         lora_picker,
-        no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
         clock_face_picker,
@@ -37,15 +36,12 @@ class menuHandler
         system_base_menu,
         key_verification_init,
         key_verification_final_prompt,
-        trace_route_menu,
-        throttle_message,
+        throttle_message
     };
     static screenMenus menuQueue;
 
-    static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void handleMenuSwitch(OLEDDisplay *display);
-    static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);
     static void clockMenu();
     static void TZPicker();
     static void TwelveHourPicker();
@@ -68,7 +64,6 @@ class menuHandler
     static void shutdownMenu();
     static void addFavoriteMenu();
     static void removeFavoriteMenu();
-    static void traceRouteMenu();
     static void testMenu();
     static void numberTest();
     static void wifiBaseMenu();
@@ -76,7 +71,6 @@ class menuHandler
     static void notificationsMenu();
     static void screenOptionsMenu();
     static void powerMenu();
-    static void textMessageMenu();
 
   private:
     static void saveUIConfig();

src/graphics/draw/MessageRenderer.cpp

@@ -137,11 +137,7 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, textChunk.c_str());
             }
             display->drawString(cursorX, fontY, textChunk.c_str());
-#if defined(OLED_UA) || defined(OLED_RU)
-            cursorX += display->getStringWidth(textChunk.c_str(), textChunk.length(), true);
-#else
             cursorX += display->getStringWidth(textChunk.c_str());
-#endif
             i = nextControl;
             continue;
         }
@@ -159,12 +155,7 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, remaining.c_str());
             }
             display->drawString(cursorX, fontY, remaining.c_str());
-#if defined(OLED_UA) || defined(OLED_RU)
-            cursorX += display->getStringWidth(remaining.c_str(), remaining.length(), true);
-#else
             cursorX += display->getStringWidth(remaining.c_str());
-#endif
-
             break;
         }
     }
@@ -181,19 +172,12 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
-#if defined(M5STACK_UNITC6L)
-    const int fixedTopHeight = 24;
-    const int windowX = 0;
-    const int windowY = fixedTopHeight;
-    const int windowWidth = 64;
-    const int windowHeight = SCREEN_HEIGHT - fixedTopHeight;
-#else
+
     const int navHeight = FONT_HEIGHT_SMALL;
     const int scrollBottom = SCREEN_HEIGHT - navHeight;
     const int usableHeight = scrollBottom;
     const int textWidth = SCREEN_WIDTH;
 
-#endif
     bool isInverted = (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED);
     bool isBold = config.display.heading_bold;
 
@@ -208,11 +192,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         graphics::drawCommonHeader(display, x, y, titleStr);
         const char *messageString = "No messages";
         int center_text = (SCREEN_WIDTH / 2) - (display->getStringWidth(messageString) / 2);
-#if defined(M5STACK_UNITC6L)
-        display->drawString(center_text, windowY + (windowHeight / 2) - (FONT_HEIGHT_SMALL / 2) - 5, messageString);
-#else
         display->drawString(center_text, getTextPositions(display)[2], messageString);
-#endif
         return;
     }
 
@@ -220,10 +200,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(getFrom(&mp));
     char headerStr[80];
     const char *sender = "???";
-#if defined(M5STACK_UNITC6L)
-    if (node && node->has_user)
-        sender = node->user.short_name;
-#else
     if (node && node->has_user) {
         if (SCREEN_WIDTH >= 200 && strlen(node->user.long_name) > 0) {
             sender = node->user.long_name;
@@ -231,7 +207,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
             sender = node->user.short_name;
         }
     }
-#endif
     uint32_t seconds = sinceReceived(&mp), minutes = seconds / 60, hours = minutes / 60, days = hours / 24;
     uint8_t timestampHours, timestampMinutes;
     int32_t daysAgo;
@@ -251,61 +226,10 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                      sender);
         }
     } else {
-#if defined(M5STACK_UNITC6L)
-        snprintf(headerStr, sizeof(headerStr), "%s from %s", UIRenderer::drawTimeDelta(days, hours, minutes, seconds).c_str(),
-                 sender);
-#else
         snprintf(headerStr, sizeof(headerStr), "%s ago from %s", UIRenderer::drawTimeDelta(days, hours, minutes, seconds).c_str(),
                  sender);
-#endif
     }
-#if defined(M5STACK_UNITC6L)
-    graphics::drawCommonHeader(display, x, y, titleStr);
-    int headerY = getTextPositions(display)[1];
-    display->drawString(x, headerY, headerStr);
-    for (int separatorX = 0; separatorX < SCREEN_WIDTH; separatorX += 2) {
-        display->setPixel(separatorX, fixedTopHeight - 1);
-    }
-    cachedLines.clear();
-    std::string fullMsg(messageBuf);
-    std::string currentLine;
-    for (size_t i = 0; i < fullMsg.size();) {
-        unsigned char c = fullMsg[i];
-        size_t charLen = 1;
-        if ((c & 0xE0) == 0xC0)
-            charLen = 2;
-        else if ((c & 0xF0) == 0xE0)
-            charLen = 3;
-        else if ((c & 0xF8) == 0xF0)
-            charLen = 4;
-        std::string nextChar = fullMsg.substr(i, charLen);
-        std::string testLine = currentLine + nextChar;
-        if (display->getStringWidth(testLine.c_str()) > windowWidth) {
-            cachedLines.push_back(currentLine);
-            currentLine = nextChar;
-        } else {
-            currentLine = testLine;
-        }
 
-        i += charLen;
-    }
-    if (!currentLine.empty())
-        cachedLines.push_back(currentLine);
-    cachedHeights = calculateLineHeights(cachedLines, emotes);
-    int yOffset = windowY;
-    int linesDrawn = 0;
-    for (size_t i = 0; i < cachedLines.size(); ++i) {
-        if (linesDrawn >= 2)
-            break;
-        int lineHeight = cachedHeights[i];
-        if (yOffset + lineHeight > windowY + windowHeight)
-            break;
-        drawStringWithEmotes(display, windowX, yOffset, cachedLines[i], emotes, numEmotes);
-        yOffset += lineHeight;
-        linesDrawn++;
-    }
-    screen->forceDisplay();
-#else
     uint32_t now = millis();
 #ifndef EXCLUDE_EMOJI
     // === Bounce animation setup ===
@@ -349,7 +273,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     currentKey ^= ((size_t)mp.id << 24);
 
     if (cachedKey != currentKey) {
-        LOG_INFO("Onscreen message scroll cache key needs updating: cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
+        LOG_INFO("Message cache key is misssed cachedKey=0x%0x, currentKey=0x%x", cachedKey, currentKey);
 
         // Cache miss - regenerate lines and heights
         cachedLines = generateLines(display, headerStr, messageBuf, textWidth);
@@ -422,7 +346,6 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     // Draw header at the end to sort out overlapping elements
     graphics::drawCommonHeader(display, x, y, titleStr);
-#endif
 }
 
 std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerStr, const char *messageBuf, int textWidth)
@@ -451,16 +374,10 @@ std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerS
         } else {
             word += ch;
             std::string test = line + word;
-// Keep these lines for diagnostics
-// LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
-// LOG_INFO("Current String: %s", test.c_str());
-// Note: there are boolean comparison uint16 (getStringWidth) with int (textWidth), hope textWidth is always positive :)
-#if defined(OLED_UA) || defined(OLED_RU)
-            uint16_t strWidth = display->getStringWidth(test.c_str(), test.length(), true);
-#else
-            uint16_t strWidth = display->getStringWidth(test.c_str());
-#endif
-            if (strWidth > textWidth) {
+            // Keep these lines for diagnostics
+            // LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
+            // LOG_INFO("Current String: %s", test.c_str());
+            if (display->getStringWidth(test.c_str()) > textWidth) {
                 if (!line.empty())
                     lines.push_back(line);
                 line = word;

src/graphics/draw/NodeListRenderer.cpp

@@ -21,10 +21,6 @@ extern bool haveGlyphs(const char *str);
 // Global screen instance
 extern graphics::Screen *screen;
 
-#if defined(M5STACK_UNITC6L)
-static uint32_t lastSwitchTime = 0;
-#else
-#endif
 namespace graphics
 {
 namespace NodeListRenderer
@@ -397,11 +393,9 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
-#if defined(M5STACK_UNITC6L)
-    int columnWidth = display->getWidth();
-#else
+
     int columnWidth = display->getWidth() / 2;
-#endif
+
     display->clear();
 
     // Draw the battery/time header
@@ -414,11 +408,8 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
 
     int visibleNodeRows = totalRowsAvailable;
-#if defined(M5STACK_UNITC6L)
-    int totalColumns = 1;
-#else
     int totalColumns = 2;
-#endif
+
     int startIndex = scrollIndex * visibleNodeRows * totalColumns;
     if (nodeDB->getMeshNodeByIndex(startIndex)->num == nodeDB->getNodeNum()) {
         startIndex++; // skip own node
@@ -454,14 +445,12 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         }
     }
 
-#if !defined(M5STACK_UNITC6L)
     // Draw column separator
     if (shownCount > 0) {
         const int firstNodeY = y + 3;
         drawColumnSeparator(display, x, firstNodeY, lastNodeY);
     }
 
-#endif
     const int scrollStartY = y + 3;
     drawScrollbar(display, visibleNodeRows, totalEntries, scrollIndex, 2, scrollStartY);
 }
@@ -479,13 +468,6 @@ void drawDynamicNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state,
 
     unsigned long now = millis();
 
-#if defined(M5STACK_UNITC6L)
-    display->clear();
-    if (now - lastSwitchTime >= 3000) {
-        display->display();
-        lastSwitchTime = now;
-    }
-#endif
     // On very first call (on boot or state enter)
     if (lastRenderedMode == MODE_COUNT) {
         currentMode = MODE_LAST_HEARD;
@@ -540,14 +522,6 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
     double lat = DegD(ourNode->position.latitude_i);
     double lon = DegD(ourNode->position.longitude_i);
 
-#if defined(M5STACK_UNITC6L)
-    display->clear();
-    uint32_t now = millis();
-    if (now - lastSwitchTime >= 2000) {
-        display->display();
-        lastSwitchTime = now;
-    }
-#endif
     if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
 #if HAS_GPS
         if (screen->hasHeading()) {

src/graphics/draw/NotificationRenderer.cpp

@@ -383,9 +383,7 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     uint8_t firstOptionToShow = 0;
     if (alertBannerOptions > 0) {
-        if (visibleTotalLines - lineCount == 1) {
-            firstOptionToShow = curSelected;
-        } else if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
+        if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
             if (curSelected > alertBannerOptions - visibleTotalLines + lineCount)
                 firstOptionToShow = alertBannerOptions - visibleTotalLines + lineCount;
             else
@@ -394,9 +392,6 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
             firstOptionToShow = 0;
         }
     }
-    // Useful log line for troubleshooting:
-    /* LOG_WARN("alertBannerOptions: %u, curSelected: %u, visibleTotalLines: %u, lineCount: %u, firstOptionToShow: %u",
-             alertBannerOptions, curSelected, visibleTotalLines, lineCount, firstOptionToShow); */
 
     for (int i = firstOptionToShow; i < alertBannerOptions && linesShown < visibleTotalLines; i++, linesShown++) {
         if (i == curSelected) {
@@ -459,135 +454,6 @@ void NotificationRenderer::drawNotificationBox(OLEDDisplay *display, OLEDDisplay
     // count lines
 
     uint16_t boxWidth = hPadding * 2 + maxWidth;
-#if defined(M5STACK_UNITC6L)
-    if (needs_bell) {
-        if (isHighResolution && boxWidth <= 150)
-            boxWidth += 26;
-        if (!isHighResolution && boxWidth <= 100)
-            boxWidth += 20;
-    }
-
-    uint16_t screenHeight = display->height();
-    uint8_t effectiveLineHeight = FONT_HEIGHT_SMALL - 3;
-    uint8_t visibleTotalLines = std::min<uint8_t>(lineCount, (screenHeight - vPadding * 2) / effectiveLineHeight);
-    uint16_t contentHeight = visibleTotalLines * effectiveLineHeight;
-    uint16_t boxHeight = contentHeight + vPadding * 2;
-    if (visibleTotalLines == 1)
-        boxHeight += (isHighResolution ? 4 : 3);
-
-    int16_t boxLeft = (display->width() / 2) - (boxWidth / 2);
-    if (totalLines > visibleTotalLines)
-        boxWidth += (isHighResolution ? 4 : 2);
-    int16_t boxTop = (display->height() / 2) - (boxHeight / 2);
-
-    if (visibleTotalLines == 1) {
-        boxTop += 25;
-    }
-    if (alertBannerOptions < 3) {
-        int missingLines = 3 - alertBannerOptions;
-        int moveUp = missingLines * (effectiveLineHeight / 2);
-        boxTop -= moveUp;
-        if (boxTop < 0)
-            boxTop = 0;
-    }
-
-    // === Draw Box ===
-    display->setColor(BLACK);
-    display->fillRect(boxLeft, boxTop, boxWidth, boxHeight);
-    display->setColor(WHITE);
-    display->drawRect(boxLeft, boxTop, boxWidth, boxHeight);
-    display->fillRect(boxLeft, boxTop - 2, boxWidth, 1);
-    display->fillRect(boxLeft - 2, boxTop, 1, boxHeight);
-    display->fillRect(boxLeft + boxWidth + 1, boxTop, 1, boxHeight);
-    display->setColor(BLACK);
-    display->fillRect(boxLeft, boxTop, 1, 1);
-    display->fillRect(boxLeft + boxWidth - 1, boxTop, 1, 1);
-    display->fillRect(boxLeft, boxTop + boxHeight - 1, 1, 1);
-    display->fillRect(boxLeft + boxWidth - 1, boxTop + boxHeight - 1, 1, 1);
-    display->setColor(WHITE);
-    int16_t lineY = boxTop + vPadding;
-    int swingRange = 8;
-    static int swingOffset = 0;
-    static bool swingRight = true;
-    static unsigned long lastSwingTime = 0;
-    unsigned long now = millis();
-    int swingSpeedMs = 10 / (swingRange * 2);
-    if (now - lastSwingTime >= (unsigned long)swingSpeedMs) {
-        lastSwingTime = now;
-        if (swingRight) {
-            swingOffset++;
-            if (swingOffset >= swingRange)
-                swingRight = false;
-        } else {
-            swingOffset--;
-            if (swingOffset <= 0)
-                swingRight = true;
-        }
-    }
-    for (int i = 0; i < lineCount; i++) {
-        bool isTitle = (i == 0);
-        int globalOptionIndex = (i - 1) + firstOptionToShow;
-        bool isSelectedOption = (!isTitle && globalOptionIndex >= 0 && globalOptionIndex == curSelected);
-
-        uint16_t visibleWidth = 64 - hPadding * 2;
-        if (totalLines > visibleTotalLines)
-            visibleWidth -= 6;
-        char lineBuffer[lineLengths[i] + 1];
-        strncpy(lineBuffer, lines[i], lineLengths[i]);
-        lineBuffer[lineLengths[i]] = '\0';
-
-        if (isTitle) {
-            if (visibleTotalLines == 1) {
-                display->setColor(BLACK);
-                display->fillRect(boxLeft, boxTop, boxWidth, effectiveLineHeight);
-                display->setColor(WHITE);
-                display->drawString(boxLeft + (boxWidth - lineWidths[i]) / 2, boxTop, lineBuffer);
-            } else {
-                display->setColor(WHITE);
-                display->fillRect(boxLeft, boxTop, boxWidth, effectiveLineHeight);
-                display->setColor(BLACK);
-                display->drawString(boxLeft + (boxWidth - lineWidths[i]) / 2, boxTop, lineBuffer);
-                display->setColor(WHITE);
-                if (needs_bell) {
-                    int bellY = boxTop + (FONT_HEIGHT_SMALL - 8) / 2;
-                    display->drawXbm(boxLeft + (boxWidth - lineWidths[i]) / 2 - 10, bellY, 8, 8, bell_alert);
-                    display->drawXbm(boxLeft + (boxWidth + lineWidths[i]) / 2 + 2, bellY, 8, 8, bell_alert);
-                }
-            }
-            lineY = boxTop + effectiveLineHeight + 1;
-        } else if (isSelectedOption) {
-            display->setColor(WHITE);
-            display->fillRect(boxLeft, lineY, boxWidth, effectiveLineHeight);
-            display->setColor(BLACK);
-            if (lineLengths[i] > 15 && lineWidths[i] > visibleWidth) {
-                int textX = boxLeft + hPadding + swingOffset;
-                display->drawString(textX, lineY - 1, lineBuffer);
-            } else {
-                display->drawString(boxLeft + (boxWidth - lineWidths[i]) / 2, lineY - 1, lineBuffer);
-            }
-            display->setColor(WHITE);
-            lineY += effectiveLineHeight;
-        } else {
-            display->setColor(BLACK);
-            display->fillRect(boxLeft, lineY, boxWidth, effectiveLineHeight);
-            display->setColor(WHITE);
-            display->drawString(boxLeft + (boxWidth - lineWidths[i]) / 2, lineY, lineBuffer);
-            lineY += effectiveLineHeight;
-        }
-    }
-    if (totalLines > visibleTotalLines) {
-        const uint8_t scrollBarWidth = 5;
-        int16_t scrollBarX = boxLeft + boxWidth - scrollBarWidth - 2;
-        int16_t scrollBarY = boxTop + vPadding + effectiveLineHeight;
-        uint16_t scrollBarHeight = boxHeight - vPadding * 2 - effectiveLineHeight;
-        float ratio = (float)visibleTotalLines / totalLines;
-        uint16_t indicatorHeight = std::max((int)(scrollBarHeight * ratio), 4);
-        float scrollRatio = (float)(firstOptionToShow + lineCount - visibleTotalLines) / (totalLines - visibleTotalLines);
-        uint16_t indicatorY = scrollBarY + scrollRatio * (scrollBarHeight - indicatorHeight);
-        display->drawRect(scrollBarX, scrollBarY, scrollBarWidth, scrollBarHeight);
-        display->fillRect(scrollBarX + 1, indicatorY, scrollBarWidth - 2, indicatorHeight);
-    }
-#else
     if (needs_bell) {
         if (isHighResolution && boxWidth <= 150)
             boxWidth += 26;
@@ -676,7 +542,6 @@ void NotificationRenderer::drawNotificationBox(OLEDDisplay *display, OLEDDisplay
         display->drawRect(scrollBarX, scrollBarY, scrollBarWidth, scrollBarHeight);
         display->fillRect(scrollBarX + 1, indicatorY, scrollBarWidth - 2, indicatorHeight);
     }
-#endif
 }
 
 /// Draw the last text message we received

src/graphics/draw/UIRenderer.cpp

@@ -20,7 +20,7 @@
 
 // External variables
 extern graphics::Screen *screen;
-static uint32_t lastSwitchTime = 0;
+
 namespace graphics
 {
 NodeNum UIRenderer::currentFavoriteNodeNum = 0;
@@ -194,7 +194,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -218,6 +218,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // **********************
 void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+
     if (favoritedNodes.empty())
         return;
 
@@ -229,15 +230,8 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     meshtastic_NodeInfoLite *node = favoritedNodes[nodeIndex];
     if (!node || node->num == nodeDB->getNodeNum() || !node->is_favorite)
         return;
-    uint32_t now = millis();
+
     display->clear();
-#if defined(M5STACK_UNITC6L)
-    if (now - lastSwitchTime >= 10000) // 10000 ms = 10 秒
-    {
-        display->display();
-        lastSwitchTime = now;
-    }
-#endif
     currentFavoriteNodeNum = node->num;
     // === Create the shortName and title string ===
     const char *shortName = (node->has_user && haveGlyphs(node->user.short_name)) ? node->user.short_name : "Node";
@@ -256,13 +250,9 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // List of available macro Y positions in order, from top to bottom.
     int line = 1; // which slot to use next
     std::string usernameStr;
-    // === 1. Long Name (always try to show first) ===
-#if defined(M5STACK_UNITC6L)
-    const char *username = (node->has_user && node->user.long_name[0]) ? node->user.short_name : nullptr;
-#else
-    const char *username = (node->has_user && node->user.long_name[0]) ? node->user.long_name : nullptr;
-#endif
 
+    // === 1. Long Name (always try to show first) ===
+    const char *username = (node->has_user && node->user.long_name[0]) ? node->user.long_name : nullptr;
     if (username) {
         usernameStr = sanitizeString(username); // Sanitize the incoming long_name just in case
         // Print node's long name (e.g. "Backpack Node")
@@ -317,7 +307,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     if (seenStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], seenStr);
     }
-#if !defined(M5STACK_UNITC6L)
+
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
@@ -489,7 +479,6 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         }
         // else show nothing
     }
-#endif
 }
 
 // ****************************
@@ -503,11 +492,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     int line = 1;
 
     // === Header ===
-#if defined(M5STACK_UNITC6L)
-    graphics::drawCommonHeader(display, x, y, "Home");
-#else
     graphics::drawCommonHeader(display, x, y, "");
-#endif
 
     // === Content below header ===
 
@@ -522,25 +507,20 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     config.display.heading_bold = false;
 
     // Display Region and Channel Utilization
-#if defined(M5STACK_UNITC6L)
-    drawNodes(display, x, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
-#else
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
-#endif
+
     char uptimeStr[32] = "";
     uint32_t uptime = millis() / 1000;
     uint32_t days = uptime / 86400;
     uint32_t hours = (uptime % 86400) / 3600;
     uint32_t mins = (uptime % 3600) / 60;
     // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-#if !defined(M5STACK_UNITC6L)
     if (days)
         snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
     else if (hours)
         snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
     else
         snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
-#endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
     // === Second Row: Satellites and Voltage ===
@@ -569,21 +549,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     }
 #endif
 
-#if defined(M5STACK_UNITC6L)
-    line += 1;
-
-    // === Node Identity ===
-    int textWidth = 0;
-    int nameX = 0;
-    char shortnameble[35];
-    snprintf(shortnameble, sizeof(shortnameble), "%s",
-             graphics::UIRenderer::haveGlyphs(owner.short_name) ? owner.short_name : "");
-
-    // === ShortName Centered ===
-    textWidth = display->getStringWidth(shortnameble);
-    nameX = (SCREEN_WIDTH - textWidth) / 2;
-    display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
-#else
     if (powerStatus->getHasBattery()) {
         char batStr[20];
         int batV = powerStatus->getBatteryVoltageMv() / 1000;
@@ -709,7 +674,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
     }
-#endif
 }
 
 // Start Functions to write date/time to the screen
@@ -868,28 +832,6 @@ void UIRenderer::drawIconScreen(const char *upperMsg, OLEDDisplay *display, OLED
     // needs to be drawn relative to x and y
 
     // draw centered icon left to right and centered above the one line of app text
-#if defined(M5STACK_UNITC6L)
-    display->drawXbm(x + (SCREEN_WIDTH - 50) / 2, y + (SCREEN_HEIGHT - 28) / 2, icon_width, icon_height, icon_bits);
-    display->setFont(FONT_MEDIUM);
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-    display->setFont(FONT_SMALL);
-    // Draw region in upper left
-    if (upperMsg) {
-        int msgWidth = display->getStringWidth(upperMsg);
-        int msgX = x + (SCREEN_WIDTH - msgWidth) / 2;
-        int msgY = y;
-        display->drawString(msgX, msgY, upperMsg);
-    }
-    // Draw version and short name in bottom middle
-    char buf[25];
-    snprintf(buf, sizeof(buf), "%s   %s", xstr(APP_VERSION_SHORT),
-             graphics::UIRenderer::haveGlyphs(owner.short_name) ? owner.short_name : "");
-
-    display->drawString(x + getStringCenteredX(buf), y + SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM, buf);
-    screen->forceDisplay();
-
-    display->setTextAlignment(TEXT_ALIGN_LEFT); // Restore left align, just to be kind to any other unsuspecting code
-#else
     display->drawXbm(x + (SCREEN_WIDTH - icon_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - icon_height) / 2 + 2,
                      icon_width, icon_height, icon_bits);
 
@@ -898,6 +840,7 @@ void UIRenderer::drawIconScreen(const char *upperMsg, OLEDDisplay *display, OLED
     const char *title = "meshtastic.org";
     display->drawString(x + getStringCenteredX(title), y + SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM, title);
     display->setFont(FONT_SMALL);
+
     // Draw region in upper left
     if (upperMsg)
         display->drawString(x + 0, y + 0, upperMsg);
@@ -912,7 +855,6 @@ void UIRenderer::drawIconScreen(const char *upperMsg, OLEDDisplay *display, OLED
     screen->forceDisplay();
 
     display->setTextAlignment(TEXT_ALIGN_LEFT); // Restore left align, just to be kind to any other unsuspecting code
-#endif
 }
 
 // ****************************
@@ -988,26 +930,15 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         UIRenderer::formatDateTime(datetimeStr, sizeof(datetimeStr), rtc_sec, display, showTime);
         char fullLine[40];
         snprintf(fullLine, sizeof(fullLine), " Date: %s", datetimeStr);
-#if !defined(M5STACK_UNITC6L)
         display->drawString(0, getTextPositions(display)[line++], fullLine);
-#endif
 
         // === Third Row: Latitude ===
         char latStr[32];
-#if defined(M5STACK_UNITC6L)
-        snprintf(latStr, sizeof(latStr), "Lat:%.5f", geoCoord.getLatitude() * 1e-7);
-        display->drawString(x, getTextPositions(display)[line++] + 2, latStr);
-#else
         snprintf(latStr, sizeof(latStr), " Lat: %.5f", geoCoord.getLatitude() * 1e-7);
         display->drawString(x, getTextPositions(display)[line++], latStr);
-#endif
 
         // === Fourth Row: Longitude ===
         char lonStr[32];
-#if defined(M5STACK_UNITC6L)
-        snprintf(lonStr, sizeof(lonStr), "Lon:%.3f", geoCoord.getLongitude() * 1e-7);
-        display->drawString(x, getTextPositions(display)[line++] + 4, lonStr);
-#else
         snprintf(lonStr, sizeof(lonStr), " Lon: %.5f", geoCoord.getLongitude() * 1e-7);
         display->drawString(x, getTextPositions(display)[line++], lonStr);
 
@@ -1019,9 +950,8 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             snprintf(DisplayLineTwo, sizeof(DisplayLineTwo), " Alt: %.0im", geoCoord.getAltitude());
         }
         display->drawString(x, getTextPositions(display)[line++], DisplayLineTwo);
-#endif
     }
-#if !defined(M5STACK_UNITC6L)
+
     // === Draw Compass if heading is valid ===
     if (validHeading) {
         // --- Compass Rendering: landscape (wide) screens use original side-aligned logic ---
@@ -1104,7 +1034,6 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         }
     }
 #endif
-#endif
 }
 
 #ifdef USERPREFS_OEM_TEXT
@@ -1261,6 +1190,7 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
             display->setColor(WHITE);
         }
     }
+
     // Knock the corners off the square
     display->setColor(BLACK);
     display->drawRect(rectX, y - 2, 1, 1);

src/graphics/fonts/EinkDisplayFonts.cpp

@@ -1,5 +1,3 @@
-#ifdef USE_EINK
-
 #include "EinkDisplayFonts.h"
 
 // Created by https://oleddisplay.squix.ch/ Consider a donation
@@ -1184,5 +1182,3 @@ const uint8_t Monospaced_plain_30[] PROGMEM = {
     0xF0, 0xFF, 0x01, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0xE0, 0x00, 0xFE, 0x03, 0x00, 0xE0, 0x80, 0x7F,
     0x00, 0x00, 0xE0, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x10 // 255
 };
-
-#endif // USE_EINK

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,8 +1,6 @@
 #ifndef EINKDISPLAYFONTS_h
 #define EINKDISPLAYFONTS_h
 
-#ifdef USE_EINK
-
 #ifdef ARDUINO
 #include <Arduino.h>
 #elif __MBED__
@@ -13,7 +11,4 @@
  * Monospaced Plain 30
  */
 extern const uint8_t Monospaced_plain_30[] PROGMEM;
-
-#endif // USE_EINK
-
 #endif

src/graphics/fonts/OLEDDisplayFontsCS.cpp

@@ -1,5 +1,3 @@
-#ifdef OLED_CS
-
 #include "OLEDDisplayFontsCS.h"
 
 // Font generated or edited with the glyphEditor
@@ -1862,6 +1860,4 @@ const uint8_t ArialMT_Plain_24_CS[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00,
     0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00,
     0x06, // 255
-};
-
-#endif // OLED_CS
+};

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -1,5 +1,4 @@
 // trunk-ignore-all(clang-format): Preserve long lines
-#ifdef OLED_PL
 #include "OLEDDisplayFontsPL.h"
 
 const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
@@ -1311,6 +1310,4 @@ const uint8_t ArialMT_Plain_24_PL[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 253
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 255
-};
-
-#endif // OLED_PL
+};

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -8,6 +8,4 @@
 #endif
 
 extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
-extern const uint8_t ArialMT_Plain_16_RU[] PROGMEM;
-extern const uint8_t ArialMT_Plain_24_RU[] PROGMEM;
 #endif

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -1,5 +1,3 @@
-#ifdef OLED_UA
-
 #include "OLEDDisplayFontsUA.h"
 
 // Font generated or edited with the glyphEditor
@@ -1922,6 +1920,4 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00,
     0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8,
     0xFF, // 1103
-};
-
-#endif // OLED_UA
+};

src/graphics/images.h

@@ -27,8 +27,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
@@ -287,9 +286,6 @@ const uint8_t digital_icon_clock[] PROGMEM = {0b00111100, 0b01000010, 0b10000101
 #define analog_icon_clock_height 8
 const uint8_t analog_icon_clock[] PROGMEM = {0b11111111, 0b01000010, 0b00100100, 0b00011000,
                                              0b00100100, 0b01000010, 0b01000010, 0b11111111};
-#ifdef M5STACK_UNITC6L
-#include "img/icon_small.xbm"
-#else
+
 #include "img/icon.xbm"
-#endif
 static_assert(sizeof(icon_bits) >= 0, "Silence unused variable warning");

src/graphics/img/icon_small.xbm

@@ -1,30 +0,0 @@
-#ifndef USERPREFS_HAS_SPLASH
-#define icon_width 50
-#define icon_height 20
-static uint8_t icon_bits[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x80, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x80,
-  0x07, 0xc0, 0x07, 0x00, 0x00, 0x00, 0xc0, 0x0f,
-  0xc0, 0x0f, 0x00, 0x00, 0x00, 0xe0, 0x07, 0xe0,
-  0x0f, 0x00, 0x00, 0x00, 0xe0, 0x07, 0xf0, 0x1f,
-  0x00, 0x00, 0x00, 0xf0, 0x03, 0xf0, 0x3f, 0x00,
-  0x00, 0x00, 0xf8, 0x03, 0xf8, 0x7f, 0x00, 0x00,
-  0x00, 0xf8, 0x01, 0xfc, 0x7e, 0x00, 0x00, 0x00,
-  0xfc, 0x00, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0xfe,
-  0x00, 0x7e, 0xf8, 0x00, 0x00, 0x00, 0x7e, 0x00,
-  0x3f, 0xf8, 0x01, 0x00, 0x00, 0x3f, 0x00, 0x1f,
-  0xf0, 0x01, 0x00, 0x00, 0x1f, 0x80, 0x1f, 0xe0,
-  0x03, 0x00, 0x80, 0x1f, 0xc0, 0x0f, 0xe0, 0x03,
-  0x00, 0x80, 0x0f, 0xc0, 0x07, 0xc0, 0x07, 0x00,
-  0xc0, 0x0f, 0xe0, 0x07, 0x80, 0x0f, 0x00, 0xe0,
-  0x07, 0xf0, 0x03, 0x80, 0x1f, 0x00, 0xe0, 0x03,
-  0xf8, 0x03, 0x00, 0x1f, 0x00, 0xf0, 0x03, 0xf8,
-  0x01, 0x00, 0x3f, 0x00, 0xf8, 0x01, 0xfc, 0x00,
-  0x00, 0x7e, 0x00, 0xfc, 0x00, 0xfe, 0x00, 0x00,
-  0x7e, 0x00, 0xfc, 0x00, 0x7e, 0x00, 0x00, 0xfc,
-  0x00, 0x7e, 0x00, 0x3f, 0x00, 0x00, 0xf8, 0x00,
-  0x7e, 0x00, 0x3e, 0x00, 0x00, 0xf8, 0x00, 0x38,
-  0x00, 0x1c, 0x00, 0x00, 0x70, 0x00, 0x10, 0x00,
-  0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00 };
-#endif