Code updates to resolve build failures (#7406)

* Move BRC address code to a .cpp file since it will be used from multiple places.

* Nodelist with addresses

* Burning Man icon for BRC page

* Draw last-seen time instead of compass

This is likely more important - don't want to wander to a device that is off.

* Add the bearing list back to the cycled pages on oled devices

* Add bearings screen into the carousel of rotated screens

* trunk fmt

* fix build errors caused by trunk fmt

* correct swapped screen positions for BRC vs bearings display

* don't show playa position if unknown

src/graphics/BRC.cpp

@@ -0,0 +1,156 @@
+#include "BRC.h"
+#include "GPSStatus.h"
+#include "gps/GeoCoord.h"
+#include "graphics/Screen.h"
+
+#if HAS_SCREEN
+
+using namespace meshtastic;
+
+const int32_t BRC_LATI = (40.786958 * 1e7);
+const int32_t BRC_LONI = (-119.202994 * 1e7);
+const double BRC_LATF = 40.786958;
+const double BRC_LONF = -119.202994;
+const double BRC_NOON = 1.5;
+const double RAD_TO_HOUR = (6.0 / 3.14159);
+const double METER_TO_FEET = 3.28084;
+const double FEET_TO_METER = 1.0 / METER_TO_FEET;
+
+// Pre-calculated street data for performance
+struct StreetInfo {
+    float center;
+    float width;
+    const char *name;
+};
+
+/*
+# python code to generate the StreetInfo
+
+esp_center = 2500
+street_info = [
+  # name, width, preceeding block depth
+  ('Esp', 40, 60), # block size is fake
+  ('A',   30, 400),
+  ('B',   30, 250),
+  ('C',   30, 250),
+  ('D',   30, 250),
+  ('E',   40, 250),
+  ('F',   30, 450), # E-F block is exra deep
+  ('G',   30, 250),
+  ('H',   30, 250),
+  ('I',   30, 250),
+  ('J',   30, 150),
+  ('K',   50, 150),
+]
+
+street_center = esp_center - street_info[0][1] //2 - street_info[0][2]
+last_center = esp_center
+for (name, street_width, block_width) in street_info:
+    offset = (street_width + block_width) // 2
+    street_center += street_width //2 + block_width
+
+    dia = street_center * 2
+    dist = street_center - last_center
+
+    print(f"{{{street_center}, {offset}, \"{name}\"}},\t// +{dist}ft\tdia: {dia:,}ft")
+
+    last_center = street_center
+    street_center += street_width //2
+
+street_center += 50 # extra buffer after the edge of k to include walk-in camping parking
+print(f"{{{street_center}, 0, nullptr}},\t// +{street_center-last_center}ft")
+*/
+
+static const StreetInfo streets[] = {
+    {2500, 50, "Esp"},  // +0ft	dia: 5,000ft
+    {2935, 215, "A"},   // +435ft	dia: 5,870ft
+    {3215, 140, "B"},   // +280ft	dia: 6,430ft
+    {3495, 140, "C"},   // +280ft	dia: 6,990ft
+    {3775, 140, "D"},   // +280ft	dia: 7,550ft
+    {4060, 145, "E"},   // +285ft	dia: 8,120ft
+    {4545, 240, "F"},   // +485ft	dia: 9,090ft
+    {4825, 140, "G"},   // +280ft	dia: 9,650ft
+    {5105, 140, "H"},   // +280ft	dia: 10,210ft
+    {5385, 140, "I"},   // +280ft	dia: 10,770ft
+    {5565, 90, "J"},    // +180ft	dia: 11,130ft
+    {5755, 100, "K"},   // +190ft	dia: 11,510ft
+    {5830, 0, nullptr}, // +75ft
+};
+
+BRCAddress::BRCAddress(int32_t lat, int32_t lon)
+{
+    bearing = GeoCoord::bearing(BRC_LATF, BRC_LONF, DegD(lat), DegD(lon)) * RAD_TO_HOUR;
+    bearing += 12.0 - BRC_NOON;
+    while (bearing > 12.0) {
+        bearing -= 12.0;
+    }
+
+    // In imperial units because that is how golden spike data is provided.
+    distance = GeoCoord::latLongToMeter(BRC_LATF, BRC_LONF, DegD(lat), DegD(lon)) * METER_TO_FEET;
+};
+
+int BRCAddress::radial(char *buf, size_t len)
+{
+    uint8_t hour = (uint8_t)(bearing);
+    uint8_t minute = (uint8_t)((bearing - hour) * 60.0);
+    hour %= 12;
+    if (hour == 0) {
+        hour = 12;
+    }
+    return snprintf(buf, len, "%d:%02d", hour, minute);
+};
+
+int BRCAddress::annular(char *buf, size_t len, bool noUnit)
+{
+    const char *unit = "m";
+    float unitMultiplier = FEET_TO_METER;
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+        unitMultiplier = 1.0;
+        unit = "ft";
+    }
+    if (noUnit)
+        unit = "";
+
+    if (bearing > 1.75 && bearing < 10.25) {
+        const char *street = nullptr;
+        float dist = 0;
+        // Find the appropriate street based on distance
+        for (const auto &s : streets) {
+            if (distance > s.center - s.width) {
+                street = s.name;
+                dist = distance - s.center;
+            } else {
+                break;
+            }
+        }
+        if (street) {
+            return snprintf(buf, len, "%s %d%s", street, int(dist * unitMultiplier), unit);
+        }
+    }
+
+    return snprintf(buf, len, "%d%s", int(distance * unitMultiplier), unit);
+};
+
+int BRCAddress::full(char *buf, size_t len)
+{
+    auto l = radial(buf, len - 4);
+    buf += l;
+    *(buf++) = ' ';
+    *(buf++) = '&';
+    *(buf++) = ' ';
+    buf += annular(buf, len - l - 4, false);
+    buf[l] = 0; // always null terminated
+    return l;
+};
+
+int BRCAddress::compact(char *buf, size_t len)
+{
+    auto l = radial(buf, len - 2);
+    buf += l;
+    *(buf++) = '&';
+    buf += annular(buf, len - l - 2, true);
+    buf[l] = 0; // always null terminated
+    return l;
+};
+
+#endif

src/graphics/BRC.h

@@ -0,0 +1,21 @@
+#pragma once
+
+// For size_t/int32_t types on some platforms.
+#include <cstdint>
+// For size_t
+#include <cstddef>
+
+class BRCAddress
+{
+  public:
+    BRCAddress(int32_t lat, int32_t lon);
+
+    int radial(char *buf, size_t len);
+    int annular(char *buf, size_t len, bool noUnit);
+    int full(char *buf, size_t len);
+    int compact(char *buf, size_t len);
+
+  private:
+    float bearing;
+    float distance;
+};

src/graphics/Screen.cpp

@@ -924,6 +924,12 @@ void Screen::setFrames(FrameFocus focus)
     normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
     indicatorIcons.push_back(icon_list);
 
+#if HAS_SCREEN
+    fsi.positions.nodelist_brc = numframes;
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawBRCList;
+    indicatorIcons.push_back(icon_bm);
+#endif
+
     fsi.positions.gps = numframes;
     normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
     indicatorIcons.push_back(icon_compass);
@@ -1391,7 +1397,8 @@ int Screen::handleInputEvent(const InputEvent *event)
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_distance ||
                            this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_hopsignal ||
-                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings) {
+                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_bearings ||
+                           this->ui->getUiState()->currentFrame == framesetInfo.positions.nodelist_brc) {
                     menuHandler::nodeListMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.wifi) {
                     menuHandler::wifiBaseMenu();

src/graphics/Screen.h

@@ -662,6 +662,7 @@ class Screen : public concurrency::OSThread
             uint8_t nodelist_hopsignal = 255;
             uint8_t nodelist_distance = 255;
             uint8_t nodelist_bearings = 255;
+            uint8_t nodelist_brc = 255;
             uint8_t clock = 255;
             uint8_t firstFavorite = 255;
             uint8_t lastFavorite = 255;

src/graphics/draw/NodeListRenderer.cpp

@@ -6,6 +6,7 @@
 #include "UIRenderer.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h" // for getTime() function
+#include "graphics/BRC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
 #include "graphics/images.h"
@@ -87,6 +88,8 @@ const char *getCurrentModeTitle(int screenWidth)
 #endif
     case MODE_DISTANCE:
         return "Distance";
+    case MODE_BEARING:
+        return "Bearing";
     default:
         return "Nodes";
     }
@@ -309,6 +312,9 @@ void drawEntryDynamic(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     case MODE_DISTANCE:
         drawNodeDistance(display, node, x, y, columnWidth);
         break;
+    case MODE_BEARING:
+        drawEntryCompass(display, node, x, y, columnWidth);
+        break;
     default:
         break;
     }
@@ -335,6 +341,35 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     }
 }
 
+void drawEntryBRC(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth)
+{
+    bool isLeftCol = (x < SCREEN_WIDTH / 2);
+
+    // Adjust max text width depending on column and screen width
+    int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
+
+    const char *nodeName = getSafeNodeName(node);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    auto xText = x + ((isHighResolution) ? 6 : 3);
+    display->drawString(xText, y, nodeName);
+
+    if (nodeDB->hasValidPosition(node)) {
+        char buf[14] = "";
+        BRCAddress(node->position.latitude_i, node->position.longitude_i).compact(buf, 14);
+        auto nameWidth = display->getStringWidth("WWWW") - 2; // Fixed width so they are aligned.
+        display->drawString(xText + nameWidth, y, buf);
+    }
+
+    if (node->is_favorite) {
+        if (isHighResolution) {
+            drawScaledXBitmap16x16(x, y + 6, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint, display);
+        } else {
+            display->drawXbm(x, y + 5, smallbulletpoint_width, smallbulletpoint_height, smallbulletpoint);
+        }
+    }
+}
+
 void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
                       double userLat, double userLon)
 {
@@ -384,17 +419,46 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     */
 }
 
+void drawLastSeenExtra(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
+                       float /*myHeading*/, double /*userLat*/, double /*userLon*/)
+{
+    char timeStr[10];
+    uint32_t seconds = sinceLastSeen(node);
+    if (seconds == 0 || seconds == UINT32_MAX) {
+        snprintf(timeStr, sizeof(timeStr), "?");
+    } else {
+        uint32_t minutes = seconds / 60, hours = minutes / 60, days = hours / 24;
+        snprintf(timeStr, sizeof(timeStr), (days > 99 ? "?" : "%d%c"),
+                 (days    ? days
+                  : hours ? hours
+                          : minutes),
+                 (days    ? 'd'
+                  : hours ? 'h'
+                          : 'm'));
+    }
+
+    bool isLeftCol = (x < SCREEN_WIDTH / 2);
+    int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
+    int rightEdge = x + columnWidth - timeOffset;
+    if (timeStr[strlen(timeStr) - 1] == 'm') // Fix the fact that our fonts don't line up well all the time
+        rightEdge -= 1;
+    // display->setTextAlignment(TEXT_ALIGN_RIGHT);
+    int textWidth = display->getStringWidth(timeStr);
+    display->drawString(rightEdge - textWidth, y, timeStr);
+}
+
 // =============================
 // Main Screen Functions
 // =============================
 
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon)
+                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon,
+                        int totalColumns)
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
 
-    int columnWidth = display->getWidth() / 2;
+    int columnWidth = display->getWidth() / totalColumns;
 
     display->clear();
 
@@ -408,7 +472,6 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
 
     int visibleNodeRows = totalRowsAvailable;
-    int totalColumns = 2;
 
     int startIndex = scrollIndex * visibleNodeRows * totalColumns;
     if (nodeDB->getMeshNodeByIndex(startIndex)->num == nodeDB->getNodeNum()) {
@@ -446,7 +509,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     }
 
     // Draw column separator
-    if (shownCount > 0) {
+    if (shownCount > 0 && totalColumns > 1) {
         const int firstNodeY = y + 3;
         drawColumnSeparator(display, x, firstNodeY, lastNodeY);
     }
@@ -482,7 +545,31 @@ void drawDynamicNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state,
 
     // Render screen based on currentMode
     const char *title = getCurrentModeTitle(display->getWidth());
+
+    if (currentMode == MODE_BEARING) {
+        float heading = 0;
+        bool validHeading = false;
+        auto ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+        double lat = DegD(ourNode->position.latitude_i);
+        double lon = DegD(ourNode->position.longitude_i);
+
+        if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+            if (screen->hasHeading()) {
+                heading = screen->getHeading(); // degrees
+                validHeading = true;
+            } else {
+                heading = screen->estimatedHeading(lat, lon);
+                validHeading = !isnan(heading);
+            }
+            if (!validHeading) {
+                lastRenderedMode = MODE_COUNT;
+                return;
+            }
+        }
+        drawNodeListScreen(display, state, x, y, title, drawEntryCompass, drawCompassArrow, heading, lat, lon);
+    } else {
         drawNodeListScreen(display, state, x, y, title, drawEntryDynamic);
+    }
 
     // Track the last mode to avoid reinitializing modeStartTime
     lastRenderedMode = currentMode;
@@ -539,6 +626,11 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
     drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, heading, lat, lon);
 }
 
+void drawBRCList(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    drawNodeListScreen(display, state, x, y, "BRC", drawEntryBRC, drawLastSeenExtra, 0, 0, 0, 1);
+}
+
 /// Draw a series of fields in a column, wrapping to multiple columns if needed
 void drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char **fields)
 {

src/graphics/draw/NodeListRenderer.h

@@ -24,12 +24,12 @@ typedef void (*EntryRenderer)(OLEDDisplay *, meshtastic_NodeInfoLite *, int16_t,
 typedef void (*NodeExtrasRenderer)(OLEDDisplay *, meshtastic_NodeInfoLite *, int16_t, int16_t, int, float, double, double);
 
 // Node list mode enumeration
-enum NodeListMode { MODE_LAST_HEARD = 0, MODE_HOP_SIGNAL = 1, MODE_DISTANCE = 2, MODE_COUNT = 3 };
+enum NodeListMode { MODE_LAST_HEARD = 0, MODE_HOP_SIGNAL = 1, MODE_DISTANCE = 2, MODE_BEARING = 3, MODE_COUNT = 4 };
 
 // Main node list screen function
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
                         EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float heading = 0, double lat = 0,
-                        double lon = 0);
+                        double lon = 0, int totalColumns = 2);
 
 // Entry renderers
 void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth);
@@ -48,6 +48,7 @@ void drawHopSignalScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
 void drawDistanceScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 void drawDynamicNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+void drawBRCList(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
 // Utility functions
 const char *getCurrentModeTitle(int screenWidth);

src/graphics/draw/UIRenderer.cpp

@@ -8,6 +8,7 @@
 #include "airtime.h"
 #include "configuration.h"
 #include "gps/GeoCoord.h"
+#include "graphics/BRC.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -308,23 +309,12 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         display->drawString(x, getTextPositions(display)[line++], seenStr);
     }
 
-    // === 4. Uptime (only show if metric is present) ===
-    char uptimeStr[32] = "";
-    if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
-    }
-    if (uptimeStr[0] && line < 5) {
-        display->drawString(x, getTextPositions(display)[line++], uptimeStr);
+    // === 4. Burning Man location (only show if their position is known) ===
+    char brcStr[32] = "";
+    if (nodeDB->hasValidPosition(node) && line < 5) {
+        brcStr[0] = 32; // Space before the address to align with other rows.
+        BRCAddress(node->position.latitude_i, node->position.longitude_i).full(brcStr + 1, sizeof(brcStr) - 1);
+        display->drawString(x, getTextPositions(display)[line++], brcStr);
     }
 
     // === 5. Distance (only if both nodes have GPS position) ===
@@ -921,7 +911,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 
     // If GPS is off, no need to display these parts
-    if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
+    if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0 && gpsStatus->getHasLock()) {
 
         // === Second Row: Date ===
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true);
@@ -942,14 +932,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         snprintf(lonStr, sizeof(lonStr), " Lon: %.5f", geoCoord.getLongitude() * 1e-7);
         display->drawString(x, getTextPositions(display)[line++], lonStr);
 
-        // === Fifth Row: Altitude ===
-        char DisplayLineTwo[32] = {0};
-        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
-            snprintf(DisplayLineTwo, sizeof(DisplayLineTwo), " Alt: %.0fft", geoCoord.getAltitude() * METERS_TO_FEET);
+        // === Fifth Row: Burning Man! ===
+        char addrStr[32];
+        BRCAddress(geoCoord.getLatitude(), geoCoord.getLongitude()).full(addrStr, sizeof(addrStr));
+        display->drawString(x, getTextPositions(display)[line++], addrStr);
     } else {
-            snprintf(DisplayLineTwo, sizeof(DisplayLineTwo), " Alt: %.0im", geoCoord.getAltitude());
+        meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+        // from cell phone?
+        if (nodeDB->hasValidPosition(ourNode)) {
+            char addrStr[32];
+            BRCAddress(ourNode->position.latitude_i, ourNode->position.longitude_i).full(addrStr, sizeof(addrStr));
+            display->drawString(x, getTextPositions(display)[line++], addrStr);
         }
-        display->drawString(x, getTextPositions(display)[line++], DisplayLineTwo);
     }
 
     // === Draw Compass if heading is valid ===

src/graphics/images.h

@@ -156,6 +156,18 @@ const uint8_t icon_list[] PROGMEM = {
     0x82  // Row 7: #.....#.
 };
 
+// ➤ The Man Icon (8x8)
+const uint8_t icon_bm[] PROGMEM = {
+    0x42, // Row 0: .#....#.
+    0x3C, // Row 1: ..####..
+    0x3C, // Row 2: ..####..
+    0x18, // Row 3: ...##...
+    0x18, // Row 4: ...##...
+    0x24, // Row 5: ..#..#..
+    0x24, // Row 6: ..#..#..
+    0x42  // Row 7: .#....#.
+};
+
 // 📶 Signal Bars Icon (left to right, small to large with spacing)
 const uint8_t icon_signal[] PROGMEM = {
     0b00000000, // ░░░░░░░

src/mesh/FloodingRouter.cpp

@@ -72,10 +72,11 @@ void FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 
                 tosend->hop_limit--; // bump down the hop count
 #if USERPREFS_EVENT_MODE
-                if (tosend->hop_limit > 2) {
+                // BURNING MESH!
+                if (tosend->hop_limit > 3) {
                     // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
-                    tosend->hop_start -= (tosend->hop_limit - 2);
-                    tosend->hop_limit = 2;
+                    tosend->hop_start -= (tosend->hop_limit - 3);
+                    tosend->hop_limit = 3;
                 }
 #endif
                 tosend->next_hop = NO_NEXT_HOP_PREFERENCE; // this should already be the case, but just in case

src/mesh/MeshTypes.h

@@ -38,7 +38,8 @@ enum RxSource {
 #define HOP_MAX 7
 
 /// We normally just use max 3 hops for sending reliable messages
-#define HOP_RELIABLE 3
+// BURNING MESH!
+#define HOP_RELIABLE 4
 
 // For old firmware or when falling back to flooding, there is no next-hop preference
 #define NO_NEXT_HOP_PREFERENCE 0

userPrefs.jsonc

@@ -1,10 +1,10 @@
 {
   // "USERPREFS_BUTTON_PIN": "36",
-  // "USERPREFS_CHANNELS_TO_WRITE": "3",
+  "USERPREFS_CHANNELS_TO_WRITE": "1",
   // "USERPREFS_CHANNEL_0_DOWNLINK_ENABLED": "false",
-  // "USERPREFS_CHANNEL_0_NAME": "REPLACEME",
-  // "USERPREFS_CHANNEL_0_PRECISION": "14",
-  // "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
+  "USERPREFS_CHANNEL_0_NAME": "Everyone",
+  "USERPREFS_CHANNEL_0_PRECISION": "0",
+  "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
   // "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
   // "USERPREFS_CHANNEL_1_DOWNLINK_ENABLED": "false",
   // "USERPREFS_CHANNEL_1_NAME": "NodeChat",
@@ -17,12 +17,12 @@
   // "USERPREFS_CHANNEL_2_PSK": "{ 0x15, 0x6f, 0xfe, 0x46, 0xd4, 0x56, 0x63, 0x8a, 0x54, 0x43, 0x13, 0xf2, 0xef, 0x6c, 0x63, 0x89, 0xf0, 0x06, 0x30, 0x52, 0xce, 0x36, 0x5e, 0xb1, 0xe8, 0xbb, 0x86, 0xe6, 0x26, 0x5b, 0x1d, 0x58 }",
   // "USERPREFS_CHANNEL_2_UPLINK_ENABLED": "false",
   // "USERPREFS_CONFIG_GPS_MODE": "meshtastic_Config_PositionConfig_GpsMode_ENABLED",
-  // "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
+  "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
   // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
   // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
   // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
   // "USERPREFS_CONFIG_DEVICE_ROLE": "meshtastic_Config_DeviceConfig_Role_CLIENT", // Defaults to CLIENT. ROUTER*, LOST AND FOUND, and REPEATER roles are restricted.
-  // "USERPREFS_EVENT_MODE": "1",
+  "USERPREFS_EVENT_MODE": "1",
   // "USERPREFS_FIXED_BLUETOOTH": "121212",
   // "USERPREFS_FIXED_GPS": "",
   // "USERPREFS_FIXED_GPS_ALT": "0",
@@ -32,16 +32,16 @@
   // "USERPREFS_CONFIG_GPS_UPDATE_INTERVAL": "600",
   // "USERPREFS_CONFIG_POSITION_BROADCAST_INTERVAL": "1800",
   // "USERPREFS_CONFIG_DEVICE_TELEM_UPDATE_INTERVAL": "900", // Device telemetry update interval in seconds
-  // "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
-  // "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
+  "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
+  "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO",
   // "USERPREFS_USE_ADMIN_KEY_0": "{ 0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c }",
   // "USERPREFS_USE_ADMIN_KEY_1": "{}",
   // "USERPREFS_USE_ADMIN_KEY_2": "{}",
-  // "USERPREFS_OEM_TEXT": "Caterham Car Club",
-  // "USERPREFS_OEM_FONT_SIZE": "0",
-  // "USERPREFS_OEM_IMAGE_WIDTH": "50",
-  // "USERPREFS_OEM_IMAGE_HEIGHT": "28",
-  // "USERPREFS_OEM_IMAGE_DATA": "{ 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x80, 0x0F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x61, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x67, 0x00, 0x00, 0x00, 0x18, 0x1F, 0xF0, 0x67, 0x00, 0x00, 0x00, 0x30, 0x1F, 0xF8, 0x33, 0x00, 0x00, 0x00, 0x30, 0x00, 0xFC, 0x31, 0x00, 0x00, 0x00, 0x60, 0x00, 0xFE, 0x18, 0x00, 0x00, 0x00, 0x60, 0x00, 0x7E, 0x18, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x3F, 0x0C, 0x00, 0x00, 0x00, 0xC0, 0x80, 0x1F, 0x0C, 0x00, 0x00, 0x00, 0x80, 0x81, 0x1F, 0x06, 0x00, 0x00, 0x00, 0x80, 0xC1, 0x0F, 0x06, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x8F, 0x01, 0x00, 0x00, 0x00, 0x00, 0xEE, 0xC7, 0x01, 0x00, 0x00, 0x00, 0x00, 0x0C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00}",
+  "USERPREFS_OEM_TEXT": "Burning Mesh 2025",
+  "USERPREFS_OEM_FONT_SIZE": "0",
+  "USERPREFS_OEM_IMAGE_WIDTH": "36",
+  "USERPREFS_OEM_IMAGE_HEIGHT": "56",
+  "USERPREFS_OEM_IMAGE_DATA": "{ 0x06, 0x00, 0x06, 0x00, 0x06, 0x0F, 0x00, 0x0F, 0x00, 0x0F, 0x1F, 0x80, 0x1F, 0x80, 0x0F, 0x1E, 0xC0, 0x3F, 0x80, 0x07, 0x3C, 0xE0, 0x7F, 0xC0, 0x03, 0x7C, 0xF0, 0xF9, 0xE0, 0x03, 0xF8, 0xF8, 0xF0, 0xF1, 0x01, 0xF0, 0xF0, 0xF0, 0xF0, 0x00, 0xE0, 0xF1, 0xF0, 0x78, 0x00, 0xE0, 0xE3, 0x79, 0x7C, 0x00, 0xC0, 0xE3, 0x79, 0x3C, 0x00, 0x80, 0xC7, 0x3F, 0x1E, 0x00, 0x80, 0xC7, 0x3F, 0x1E, 0x00, 0x00, 0x8F, 0x1F, 0x0F, 0x00, 0x00, 0x8F, 0x0F, 0x0F, 0x00, 0x00, 0x1E, 0x8F, 0x07, 0x00, 0x00, 0x1E, 0x86, 0x07, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x70, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x78, 0xE0, 0x01, 0x00, 0x00, 0x38, 0xC0, 0x01, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x3C, 0xC0, 0x03, 0x00, 0x00, 0x1C, 0x80, 0x03, 0x00, 0x00, 0x1E, 0x80, 0x07, 0x00, 0x00, 0x1E, 0x80, 0x07, 0x00, 0x00, 0x0F, 0x00, 0x07, 0x00, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x80, 0x07, 0x00, 0x1E, 0x00, 0x80, 0x07, 0x00, 0x1E, 0x00, 0xC0, 0x03, 0x00, 0x1C, 0x00, 0xC0, 0x03, 0x00, 0x3C, 0x00, 0xC0, 0x03, 0x00, 0x3C, 0x00, 0xC0, 0x01, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00 }",
   // "USERPREFS_NETWORK_ENABLED_PROTOCOLS": "1", // Enable UDP mesh
   // "USERPREFS_NETWORK_WIFI_ENABLED": "true",
   // "USERPREFS_NETWORK_WIFI_SSID": "wifi_ssid",
@@ -52,8 +52,8 @@
   // "USERPREFS_MQTT_PASSWORD": "large4cats",
   // "USERPREFS_MQTT_ENCRYPTION_ENABLED": "true",
   // "USERPREFS_MQTT_TLS_ENABLED": "false",
-  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
+  "USERPREFS_MQTT_ROOT_TOPIC": "event/BurningMesh",
   // "USERPREFS_RINGTONE_NAG_SECS": "60",
   "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
-  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
+  "USERPREFS_TZ_STRING": "PST8PDT,M3.2.0,M11.1.0"
 }