WIP

.devcontainer/devcontainer.json

@@ -13,13 +13,16 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
+  "forwardPorts": [ 4403 ],
 
   // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
+  "postCreateCommand": ".devcontainer/setup.sh",
 }

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,24 +49,10 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,7 +18,6 @@ body:
         - ESP32
         - RP2040
         - Linux Native
-        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -1,95 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: "esp32"
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,11 +11,6 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
     - name: Install dependencies
       shell: bash
       run: |

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/workflows/build_esp32.yml

@@ -7,31 +7,57 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        id: build
+        run: bin/build-esp32.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/firmware-ota
-          board: ${{ inputs.board }}
+          file: firmware.bin
-          remove-debug-flags: >-
+          target: release/bleota.bin
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Get release version string
-            ./arch/esp32/esp32c3.ini
+        shell: bash
-            ./arch/esp32/esp32c6.ini
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          build-script-path: bin/build-esp32.sh
+        id: version
-          ota-firmware-source: firmware.bin
+
-          ota-firmware-target: release/bleota.bin
+      - name: Store binaries as an artifact
-          artifact-paths: |
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,24 +14,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-C3
+      - name: Pull web ui
-        id: build
+        uses: dsaltares/fetch-gh-release-asset@master
-        uses: ./.github/actions/build-variant
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/web
-          board: ${{ inputs.board }}
+          file: build.tar
-          remove-debug-flags: >-
+          target: build.tar
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Unpack web ui
-            ./arch/esp32/esp32c3.ini
+        run: |
-            ./arch/esp32/esp32c6.ini
+          tar -xf build.tar -C data/static
-          build-script-path: bin/build-esp32.sh
+          rm build.tar
-          ota-firmware-source: firmware-c3.bin
+      - name: Remove debug flags for release
-          ota-firmware-target: release/bleota-c3.bin
+        if: ${{ github.event_name == 'workflow_dispatch' }}
-          artifact-paths: |
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -7,31 +7,55 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-S3
+      - name: Pull web ui
-        id: build
+        uses: dsaltares/fetch-gh-release-asset@master
-        uses: ./.github/actions/build-variant
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/web
-          board: ${{ inputs.board }}
+          file: build.tar
-          remove-debug-flags: >-
+          target: build.tar
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Unpack web ui
-            ./arch/esp32/esp32c3.ini
+        run: |
-            ./arch/esp32/esp32c6.ini
+          tar -xf build.tar -C data/static
-          build-script-path: bin/build-esp32.sh
+          rm build.tar
-          ota-firmware-source: firmware-s3.bin
+      - name: Remove debug flags for release
-          ota-firmware-target: release/bleota-s3.bin
+        if: ${{ github.event_name == 'workflow_dispatch' }}
-          artifact-paths: |
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_native.yml

@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,17 +12,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        id: build
+        run: bin/build-nrf52.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-nrf52.sh
+          path: |
-          artifact-paths: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
-          arch: nrf52840

.github/workflows/build_raspbian.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
+          apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_raspbian_armv7l.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
+          apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_rpi2040.yml

@@ -12,15 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        id: build
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-rpi2040.sh
+          path: |
-          artifact-paths: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -12,16 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build STM32WL
+      - name: Build STM32
-        id: build
+        run: bin/build-stm32.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-stm32.sh
+          path: |
-          artifact-paths: |
             release/*.hex
             release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-concurrency:
+#concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
+#  group: ${{ github.ref }}
-  cancel-in-progress: true
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,18 +32,13 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
@@ -56,7 +51,6 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -92,15 +86,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
   build-nrf52:
     needs: setup
     strategy:
@@ -139,7 +124,6 @@ jobs:
 
   after-checks:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -152,20 +136,18 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
-        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
         build-stm32,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -177,7 +159,6 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
-          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -188,12 +169,12 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -202,15 +183,16 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
+          retention-days: 90
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -224,35 +206,32 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - uses: scruplelesswizard/comment-artifact@main
+      - name: Create request artifacts
-        if: ${{ github.event_name == 'pull_request' }}
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          github-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
+    needs: [gather-artifacts, after-checks]
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      [
-        gather-artifacts,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
-      ]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -266,6 +245,42 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -279,16 +294,25 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Download deb files
+      - name: Add bins to release
-        uses: actions/download-artifact@v4
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
         with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          merge-multiple: true
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
-          path: ./output
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
-      # For diagnostics
+      - name: Add debug elfs to release
-      - name: Display structure of downloaded files
+        uses: actions/upload-release-asset@v1
-        run: ls -lR
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -325,79 +349,7 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Bump version.properties
           add-paths: |
             version.properties
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-native
     steps:
       - name: Checkout code
@@ -50,18 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian
     steps:
       - name: Checkout code
@@ -50,18 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code
@@ -50,18 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/stale_bot.yml

@@ -1,22 +0,0 @@
-name: process stale Issues and PR's
-on:
-  schedule:
-    - cron: 0 6 * * *
-  workflow_dispatch: {}
-
-permissions:
-  issues: write
-  pull-requests: write
-  actions: write
-
-jobs:
-  stale_issues:
-    name: Close Stale Issues
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Stale PR+Issues
-        uses: actions/stale@v9.0.0
-        with:
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0

.github/workflows/tests.yml

@@ -57,50 +57,35 @@ jobs:
           reporter: java-junit
 
   hardware-tests:
-    runs-on: test-runner
+    runs-on: ubuntu-latest
     steps:
       - name: Checkout code
         uses: actions/checkout@v4
 
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
       - name: Upgrade python tools
         shell: bash
         run: |
-          pipx install adafruit-nrfutil
+          python -m pip install --upgrade pip
-          pipx install poetry
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
-          pipx install meshtastic --pip-args=--pre
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
-
+          pip install -U poetry --no-build-isolation
-      - name: Install PlatformIO from script
+          pip install -U meshtastic --pre --no-build-isolation
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
 
       - name: Upgrade platformio
         shell: bash
         run: |
-          export PATH=$PATH:$HOME/.local/bin
           pio upgrade
 
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 18
-
       - name: Setup pnpm
-        uses: pnpm/action-setup@v4
+        uses: pnpm/action-setup@v2
         with:
           version: latest
 
-      - name: Install dependencies, setup devices and run
+      - name: Install Dependencies
-        shell: bash
+        run: pnpm install
-        run: |
+
-          git submodule update --init --recursive
+      - name: Setup devices
-          cd meshtestic/
+        run: pnpm run setup
-          pnpm install
+
-          pnpm run setup
+      - name: Execute end to end tests on connected hardware
-          pnpm run test
+        run: pnpm run test

.github/workflows/trunk_format_pr.yml

@@ -1,43 +0,0 @@
-name: Run Trunk Fmt on PR Comment
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  trunk-fmt:
-    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Run Trunk Fmt
-        run: trunk fmt
-
-      - name: Commit and push changes
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-          git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
-          git push
-
-      - name: Comment on PR
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          script: |
-            github.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: '`trunk fmt` has been run on this PR.'
-            })

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
 jobs:
@@ -17,18 +17,17 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
-          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,4 +1,6 @@
 .pio
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.8
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.4
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.83.6
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.10
+    - bandit@1.7.9
-    - checkov@3.2.287
+    - checkov@3.2.238
-    - terrascan@1.19.9
+    - terrascan@1.19.1
-    - trivy@0.56.2
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.7.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.42.0
+    - markdownlint@0.41.0
     - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.4
+    - actionlint@1.7.1
     - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.10.0
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.21.1
+    - gitleaks@8.18.4
     - clang-format@16.0.3
     - prettier@3.3.3
   ignore:

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
+        "platformio.platformio-ide"
-        "platformio.platformio-ide",
-        "trunk.io"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

CODE_OF_CONDUCT.md

@@ -1,4 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here: 
-https://meshtastic.org/docs/legal/conduct/

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

arch/apollo3/apollo3.ini

@@ -1,33 +0,0 @@
-[apollo3_base]
-extends = arduino_base
-platform = https://github.com/nigelb/platform-apollo3blue.git#2e8a9895cf82f2836c483885e6f89b3f83d3ade4
-platform_packages=framework-arduinoapollo3@https://github.com/sparkfun/Arduino_Apollo3#a0d99c5fc9b1112d46a9d11c1339898d01e586c9
-build_type = debug
-build_flags =
-  ${arduino_base.build_flags}
-  -Isrc/platform/apollo3 -g
-  -I"${platformio.packages_dir}/framework-arduinoapollo3/libraries/SPI/src"
-  -DRADIOLIB_EEPROM_UNSUPPORTED
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-build_src_filter = 
-  ${arduino_base.build_src_filter}
-  -<platform/nrf52>
-  -<platform/esp32/>
-  -<platform/rp2040>
-  -<platform/portduino>
-  -<platform/stm32wl>
-  -<nimble/>
-  -<mesh/api/>
-  -<mesh/http/>
-  -<mesh/wifi/>
-  -<modules/esp32>
-  -<mesh/eth/>
-  -<input>
-  -<buzz>
-  -<modules/Telemetry>
-lib_deps =
-  ${env.lib_deps}
-  charlesbaynham/OSFS@^1.2.3
-  rweather/Crypto
-lib_ignore = 
-  mathertel/OneButton

arch/esp32/esp32.ini

@@ -2,16 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter}
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
-  -<platform/nrf52/>
-  -<platform/stm32wl>
-  -<platform/rp2xx0>
-  -<platform/apollo3>
-  -<mesh/eth/>
-  -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -37,7 +31,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -49,11 +43,10 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
-  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 

arch/esp32/esp32c3.ini

@@ -1,6 +1,5 @@
 [esp32c3_base]
 extends = esp32_base
-
 custom_esp32_kind = esp32c3
 
 monitor_speed = 115200

arch/esp32/esp32c6.ini

@@ -1,41 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/esp32/esp32s3.ini

@@ -1,6 +1,6 @@
 [esp32s3_base]
 extends = esp32_base
-
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
+

arch/nrf52/nrf52.ini

@@ -14,29 +14,13 @@ build_flags =
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
-  -DMESHTASTIC_EXCLUDE_AUDIO=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
-  ${arduino_base.build_src_filter}
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
-  -<platform/esp32/>
-  -<platform/stm32wl>
-  -<nimble/>
-  -<mesh/wifi/>
-  -<mesh/api/>
-  -<mesh/http/>
-  -<modules/esp32>
-  -<platform/rp2xx0>
-  -<mesh/eth/>
-  -<mesh/raspihttp>
-  -<platform/apollo3>
 
 lib_deps=
   ${arduino_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#bcd02436cfca91f7d28ad0f7dab977c6aaa781af
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -9,8 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2xx0>
+  -<platform/rp2040>
-  -<platform/apollo3>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -24,9 +23,8 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,7 +32,6 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -1,35 +1,23 @@
 ; Common settings for rp2040 Processor based targets
-[rp2350_base]
+[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico 4.2.1
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#96c3bfab9758f12c07aa20cc6d352e630c16987 ; 4.2.1 with fix for sporadic hangs
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2040
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter}
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-  -<platform/esp32/>
-  -<nimble/>
-  -<modules/esp32>
-  -<platform/nrf52/>
-  -<platform/stm32wl>
-  -<mesh/eth/>
-  -<mesh/wifi/>
-  -<mesh/http/>
-  -<platform/apollo3>
-  -<mesh/raspihttp>
 
 lib_ignore =
   BluetoothOTA
-  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto

arch/rp2xx0/rp2040.ini

@@ -1,26 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico 4.2.1
-extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#996c3bfab9758f12c07aa20cc6d352e630c16987 ; 4.2.1 with fix for sporadic hangs
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
-  -D__PLAT_RP2040__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/apollo3> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-
-lib_ignore =
-  BluetoothOTA
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,7 +1,7 @@
 [stm32_base]
 extends = arduino_base
 platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
 
 build_type = release
 
@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<platform/apollo3> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -30,9 +30,8 @@ upload_protocol = stlink
 lib_deps =
   ${env.lib_deps}
   charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
+  https://github.com/mathertel/OneButton@~2.6.1
   Wire

bin/base64_to_hex.py

@@ -1,33 +0,0 @@
-import sys
-import base64
-
-def base64_to_hex_string(b64_string):
-    try:
-        # Decode the Base64 string to raw bytes
-        decoded_bytes = base64.b64decode(b64_string)
-    except Exception as e:
-        raise ValueError(f"Invalid Base64 input: {e}")
-    
-    # Check if the decoded result is exactly 32 bytes
-    if len(decoded_bytes) != 32:
-        raise ValueError("Decoded Base64 input must be exactly 32 bytes.")
-    
-    # Convert each byte to its hex representation
-    hex_values = [f"0x{byte:02x}" for byte in decoded_bytes]
-    
-    # Join the formatted hex values with commas
-    formatted_output = "{ " + ", ".join(hex_values) + " };"
-    return formatted_output
-
-if __name__ == "__main__":
-    # Check if a Base64 string was provided in command line arguments
-    if len(sys.argv) != 2:
-        print("Usage: python script.py <base64-string>")
-        sys.exit(1)
-    
-    b64_string = sys.argv[1]
-    try:
-        formatted_hex = base64_to_hex_string(b64_string)
-        print(formatted_hex)
-    except ValueError as e:
-        print(e)

bin/build-esp32.sh

@@ -35,11 +35,6 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
-# Remove webserver files from the filesystem and rebuild
-ls -l data/static # Diagnostic list of files
-rm -rf data/static
-pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -27,4 +27,5 @@ rm -r $OUTDIR/* || true
 platformio pkg update --environment native || platformioFailed
 pio run --environment native || platformioFailed
 cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-userprefs-json.py

@@ -1,48 +0,0 @@
-import json
-import subprocess
-import re
-
-def get_macros_from_header(header_file):
-    # Run clang to preprocess the header file and capture the output
-    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
-    if result.returncode != 0:
-        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
-
-    # Extract macros from the output
-    macros = {}
-    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
-    for line in result.stdout.splitlines():
-        match = macro_pattern.match(line) 
-        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
-            macros[match.group(1)] = match.group(2)
-
-    return macros
-
-def write_macros_to_json(macros, output_file):
-    with open(output_file, 'w') as f:
-        json.dump(macros, f, indent=4)
-
-def main():
-    header_file = 'userPrefs.h'
-    output_file = 'userPrefs.json'
-    # Uncomment all macros in the header file
-    with open(header_file, 'r') as file:
-        lines = file.readlines()
-
-    uncommented_lines = []
-    for line in lines:
-        stripped_line = line.strip().replace('/*', '').replace('*/', '')
-        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
-            # Replace "//"
-            stripped_line = stripped_line.replace('//', '')
-        uncommented_lines.append(stripped_line + '\n')
-
-    with open(header_file, 'w') as file:
-        for line in uncommented_lines:
-                file.write(line)
-    macros = get_macros_from_header(header_file)
-    write_macros_to_json(macros, output_file)
-    print(f"Macros have been written to {output_file}")
-
-if __name__ == "__main__":
-    main()

bin/config-dist.yaml

@@ -1,11 +1,14 @@
-### Many device configs have been moved to /etc/meshtasticd/available.d
-### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d
-
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
 ### Including the "Module:" line!
 ---
 Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -16,7 +19,6 @@ Lora:
 #  CS: 0
 #  IRQ: 10
 #  Busy: 11
-#  DIO2_AS_RF_SWITCH: true
 #  spidev: spidev0.1
 
 #  Module: RF95  # Adafruit RFM9x
@@ -81,6 +83,17 @@ I2C:
 
 Display:
 
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
 ### Waveshare 1.44inch LCD HAT
 #  Panel: ST7735S
 #  CS: 8         #Chip Select
@@ -100,29 +113,6 @@ Display:
 #  Height: 320
 #  Rotate: true
 
-### SHCHV 3.5 RPi TFT+Touchscreen
-#  Panel: ILI9486
-#  spidev: spidev0.0
-#  BusFrequency: 30000000
-#  DC: 24
-#  Reset: 25
-#  Width: 320
-#  Height: 480
-#  OffsetRotate: 2
-
-### TZT 2.0 Inch TFT Display ST7789V 240RGBx320
-#  Panel: ST7789
-#  spidev: spidev0.0
-#  # CS: 8     # can be freely chosen
-#  BusFrequency: 80000000
-#  DC: 24      # can be freely chosen
-#  Width: 320
-#  Height: 240
-#  Reset: 25   # can be freely chosen
-#  Rotate: true
-#  OffsetRotate: 1
-#  Invert: true
-
 ### You can also specify the spi device for the display to use
 # spidev: spidev0.0
 
@@ -137,6 +127,10 @@ Touchscreen:
 #  IRQ: 24
 #  I2CAddr: 0x38
 
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
+
 ### You can also specify the spi device for the touchscreen to use
 # spidev: spidev0.0
 
@@ -160,4 +154,3 @@ Webserver:
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
-  ConfigDirectory: /etc/meshtasticd/config.d/

bin/config.d/display-waveshare-2.8.yaml

@@ -1,18 +0,0 @@
-Display:
-
-### Waveshare 2.8inch RPi LCD
-  Panel: ST7789
-  CS: 8
-  DC: 22        # Data/Command pin
-  Backlight: 18
-  Width: 240
-  Height: 320
-  Reset: 27
-  Rotate: true
-  Invert: true
-
-Touchscreen:
-### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
-  Module: XPT2046 # Waveshare 2.8inch
-  CS: 7
-  IRQ: 17

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,9 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  TXen: 13
-  RXen: 12
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  SX126X_ANT_SW: 6

bin/device-install.bat

@@ -1,26 +1,16 @@
 @ECHO OFF
 
 set PYTHON=python
-set WEB_APP=0
-
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
 
 goto GETOPTS
 :HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
 echo Flash image file to device, but first erasing and writing system information
 echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
 echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-echo     --web            Flash WEB APP.
 goto EOF
 
 :GETOPTS
@@ -29,44 +19,37 @@ if /I "%1"=="--help" goto HELP
 if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
 if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
 if /I "%1"=="-P" set PYTHON=%2 & SHIFT
-if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
 IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-    %ESPTOOL_CMD% --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 erase_flash
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-    ) else (
+	) else (
-        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF %WEB_APP%==1 (
+    for %%f in (littlefs-*.bin) do (
-        for %%f in (littlefswebui-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
-    ) else (
-        for %%f in (littlefs-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -1,45 +1,22 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
-
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
 
 set -e
 
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-    --web            Flash WEB APP.
 
 EOF
 }
-# Preprocess long options like --web
-for arg in "$@"; do
-    case "$arg" in
-        --web)
-            WEB_APP=true
-            shift # Remove this argument from the list
-            ;;
-    esac
-done
 
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
@@ -72,23 +49,19 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
+	"$PYTHON" -m esptool erase_flash
-	$ESPTOOL_CMD write_flash 0x00 ${FILENAME}
+	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
 		else
-			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
-	fi
-	if [ "$WEB_APP" = true ]; then
-		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
-	else
-		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
 	fi
+	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help

bin/device-update.bat

@@ -2,14 +2,6 @@
 
 set PYTHON=python
 
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
-
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -32,17 +24,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-update.sh

@@ -2,18 +2,6 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -21,7 +9,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -42,7 +30,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	        echo "Invalid flag."
+ 	    echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -57,7 +45,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -6,7 +6,6 @@ import configparser
 import json
 import os
 import sys
-import random
 
 rootdir = "variants/"
 
@@ -40,7 +39,5 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
+
-    print(json.dumps(random.sample(outlist, 3)))
+print(json.dumps(outlist))
-else:
-    print(json.dumps(outlist))

bin/meshtasticd.service

@@ -1,16 +1,12 @@
 [Unit]
 Description=Meshtastic Native Daemon
 After=network-online.target
-StartLimitInterval=200
-StartLimitBurst=5
 
 [Service]
 User=root
 Group=root
 Type=simple
 ExecStart=/usr/sbin/meshtasticd
-Restart=always
-RestartSec=3
 
 [Install]
 WantedBy=multi-user.target

bin/native-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
-mkdir -p /etc/meshtasticd
+mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
 else

bin/platformio-custom.py

@@ -88,13 +88,12 @@ Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
 
 # General options that are passed to the C and C++ compilers
 projenv.Append(
     CCFLAGS=[
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
-        "-DAPP_ENV=" + env.get("PIOENV"),
     ]
 )

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.9"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/icarus.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "icarus"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "icarus",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://icarus.azlan.works",
-  "vendor": "Muhammad Shah"
-}

boards/lora-relay-v1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora_isp4520.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056-rc-clock",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/ppr.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4403"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52840",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/ppr1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/seeed-sensecap-indicator.json

@@ -1,42 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x1A86", "0x7523"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3r8"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Seeed Studio SenseCAP Indicator",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "require_upload_port": true,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed-xiao-s3.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "seeed-xiao-s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "seeed-xiao-s3",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
-  "vendor": "Seeed Studio"
-}

boards/unphone.json

@@ -1,46 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_8MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DUNPHONE_SPIN=9",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [
-      ["0x16D0", "0x1178"],
-      ["0x303a", "0x1001"]
-    ],
-    "mcu": "esp32s3",
-    "variant": "unphone"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "unPhone",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8323072,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://unphone.net/",
-  "vendor": "University of Sheffield"
-}

boards/wiscore_rak11720.json

@@ -1,45 +0,0 @@
-{
-  "build": {
-    "cpu": "cortex-m4",
-    "f_cpu": "48000000L",
-    "mcu": "AMA3B1KK",
-    "part": "apollo3",
-    "fabi": "hard",
-    "specs": "nosys.specs",
-    "framework": {
-      "arduino": {
-        "v1": {
-          "variant": "artemis",
-          "extra_flags": "-DSFE_ARTEMIS"
-        },
-        "v2": {
-          "variant": "rak11720",
-          "extra_flags": "-DARDUINO_RAK_11720_MODULE"
-        }
-      },
-      "ambiqsdk-sfe": {
-        "variant": ["boards_sfe", "artemis_module"],
-        "extra_flags": "",
-        "variant_lib_src_filter": ""
-      }
-    }
-  },
-  "debug": {
-    "jlink_device": "AMA3B1KK-KBR",
-    "svd_path": "apollo3.svd",
-    "swo_freq": 12000000,
-    "init": {
-      "break": "tbreak setup"
-    }
-  },
-  "frameworks": ["arduino", "ambiqsdk-sfe"],
-  "name": "WisCore RAK11720 Board",
-  "upload": {
-    "maximum_ram_size": 393216,
-    "maximum_size": 983040,
-    "protocol": "svl",
-    "protocols": ["svl", "asb", "jlink"]
-  },
-  "url": "https://www.rakwireless.com",
-  "vendor": "RAKwireless"
-}

images/face-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M9 11.75a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5m6 0a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2m0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37a9.97 9.97 0 0 0 10.41 3.97c.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M9 11.75c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zm6 0c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zM12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37C11.07 8.33 14.05 10 17.42 10c.78 0 1.53-.09 2.25-.26.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/location_searching-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path fill="none" d="M0 0h24v24H0z"/><path d="M20.94 11A8.994 8.994 0 0 0 13 3.06V1h-2v2.06A8.994 8.994 0 0 0 3.06 11H1v2h2.06A8.994 8.994 0 0 0 11 20.94V23h2v-2.06A8.994 8.994 0 0 0 20.94 13H23v-2zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M0 0h24v24H0z" fill="none"/><path d="M20.94 11c-.46-4.17-3.77-7.48-7.94-7.94V1h-2v2.06C6.83 3.52 3.52 6.83 3.06 11H1v2h2.06c.46 4.17 3.77 7.48 7.94 7.94V23h2v-2.06c4.17-.46 7.48-3.77 7.94-7.94H23v-2h-2.06zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7z"/></svg>

images/room-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7m0 9.5a2.5 2.5 0 0 1 0-5 2.5 2.5 0 0 1 0 5"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7zm0 9.5c-1.38 0-2.5-1.12-2.5-2.5s1.12-2.5 2.5-2.5 2.5 1.12 2.5 2.5-1.12 2.5-2.5 2.5z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/textsms-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2M9 11H7V9h2zm4 0h-2V9h2zm4 0h-2V9h2z"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2zM9 11H7V9h2v2zm4 0h-2V9h2v2zm4 0h-2V9h2v2z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

platformio.ini

@@ -17,9 +17,11 @@ default_envs = tbeam
 ;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
+;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = canaryone
-;default_envs = native
+;default_envs = nrf52840dk-geeksville
+;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
@@ -27,9 +29,8 @@ default_envs = tbeam
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
-;default_envs = rak4631_eth_gw
 ;default_envs = rak2560
-;default_envs = rak_wismeshtap
+;default_envs = rak10701
 ;default_envs = wio-e5
 ;default_envs = radiomaster_900_bandit_nano
 ;default_envs = radiomaster_900_bandit_micro
@@ -39,126 +40,121 @@ default_envs = tbeam
 ;default_envs = heltec_vision_master_e213
 ;default_envs = heltec_vision_master_e290
 ;default_envs = heltec_mesh_node_t114
+
 extra_configs =
-	arch/*/*.ini
+  arch/*/*.ini
-	variants/*/platformio.ini
+  variants/*/platformio.ini
-description = Meshtastic
 
 [env]
 test_build_src = true
 extra_scripts = bin/platformio-custom.py
+
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-
+  -Wno-format
-	-Wno-format
+  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
-	-Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
+  -DUSE_THREAD_NAMES
-	-DUSE_THREAD_NAMES
+  -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
-	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
+  -DPB_ENABLE_MALLOC=1
-	-DPB_ENABLE_MALLOC=1
+  -DRADIOLIB_EXCLUDE_CC1101
-	-DRADIOLIB_EXCLUDE_CC1101=1
+  -DRADIOLIB_EXCLUDE_NRF24
-	-DRADIOLIB_EXCLUDE_NRF24=1
+  -DRADIOLIB_EXCLUDE_RF69
-	-DRADIOLIB_EXCLUDE_RF69=1
+  -DRADIOLIB_EXCLUDE_SX1231
-	-DRADIOLIB_EXCLUDE_SX1231=1
+  -DRADIOLIB_EXCLUDE_SX1233
-	-DRADIOLIB_EXCLUDE_SX1233=1
+  -DRADIOLIB_EXCLUDE_SI443X
-	-DRADIOLIB_EXCLUDE_SI443X=1
+  -DRADIOLIB_EXCLUDE_RFM2X
-	-DRADIOLIB_EXCLUDE_RFM2X=1
+  -DRADIOLIB_EXCLUDE_AFSK
-	-DRADIOLIB_EXCLUDE_AFSK=1
+  -DRADIOLIB_EXCLUDE_BELL
-	-DRADIOLIB_EXCLUDE_BELL=1
+  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
-	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+  -DRADIOLIB_EXCLUDE_MORSE
-	-DRADIOLIB_EXCLUDE_MORSE=1
+  -DRADIOLIB_EXCLUDE_RTTY
-	-DRADIOLIB_EXCLUDE_RTTY=1
+  -DRADIOLIB_EXCLUDE_SSTV
-	-DRADIOLIB_EXCLUDE_SSTV=1
+  -DRADIOLIB_EXCLUDE_AX25
-	-DRADIOLIB_EXCLUDE_AX25=1
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
-	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+  -DRADIOLIB_EXCLUDE_BELL
-	-DRADIOLIB_EXCLUDE_BELL=1
+  -DRADIOLIB_EXCLUDE_PAGER
-	-DRADIOLIB_EXCLUDE_PAGER=1
+  -DRADIOLIB_EXCLUDE_FSK4
-	-DRADIOLIB_EXCLUDE_FSK4=1
+  -DRADIOLIB_EXCLUDE_APRS
-	-DRADIOLIB_EXCLUDE_APRS=1
+  -DRADIOLIB_EXCLUDE_LORAWAN
-	-DRADIOLIB_EXCLUDE_LORAWAN=1
+  -DMESHTASTIC_EXCLUDE_DROPZONE=1
-	-DMESHTASTIC_EXCLUDE_DROPZONE=1
+  ;-D OLED_PL
-	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
-  -DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
-        #-DBUILD_EPOCH=$UNIX_TIME
-        ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
+
 lib_deps =
-	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
+;  jgromes/RadioLib@~6.6.0
-	mathertel/OneButton@2.6.1
+  https://github.com/jgromes/RadioLib.git#3115fc2d6700a9aee05888791ac930a910f2628f
-	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
-	https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+  https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-	nanopb/Nanopb@0.4.9
+  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
-	erriez/ErriezCRC32@1.0.1
+  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+  nanopb/Nanopb@^0.4.8
+  erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
 check_flags =
-	-DAPP_VERSION=1.0.0
+  -DAPP_VERSION=1.0.0
-	--suppressions-list=suppressions.txt
+  --suppressions-list=suppressions.txt
-	--inline-suppr
+  --inline-suppr
 
 ; Common settings for conventional (non Portduino) Arduino targets
 [arduino_base]
 framework = arduino
 lib_deps =
-	${env.lib_deps}
+  ${env.lib_deps}
-	end2endzone/NonBlockingRTTTL@1.3.0
+  end2endzone/NonBlockingRTTTL@^1.3.0
-	https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
+  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
+
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	knolleary/PubSubClient@2.8
+  knolleary/PubSubClient@^2.8
-	arduino-libraries/NTPClient@3.1.0
+  arduino-libraries/NTPClient@^3.1.0
-	arcao/Syslog@2.0.0
+  arcao/Syslog@^2.0.0
-
-[radiolib_base]
-lib_deps =
-	jgromes/RadioLib@7.1.0
 
 ; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-	adafruit/Adafruit BusIO@1.16.2
+  adafruit/Adafruit BusIO@^1.15.0
-	adafruit/Adafruit Unified Sensor@1.1.14
+  adafruit/Adafruit Unified Sensor@^1.1.11
-	adafruit/Adafruit BMP280 Library@2.6.8
+  adafruit/Adafruit BMP280 Library@^2.6.8
-	adafruit/Adafruit BMP085 Library@1.2.4
+  adafruit/Adafruit BMP085 Library@^1.2.4
-	adafruit/Adafruit BME280 Library@2.2.4
+  adafruit/Adafruit BME280 Library@^2.2.2
-	adafruit/Adafruit BMP3XX Library@2.1.5
+  adafruit/Adafruit BMP3XX Library@^2.1.5
-	adafruit/Adafruit MCP9808 Library@2.0.2
+  adafruit/Adafruit MCP9808 Library@^2.0.0
-	adafruit/Adafruit INA260 Library@1.5.2
+  adafruit/Adafruit INA260 Library@^1.5.0
-	adafruit/Adafruit INA219@1.2.3
+  adafruit/Adafruit INA219@^1.2.0
-	adafruit/Adafruit MAX1704X@1.0.3
+  adafruit/Adafruit SHTC3 Library@^1.0.0
-	adafruit/Adafruit SHTC3 Library@1.0.1
+  adafruit/Adafruit LPS2X@^2.0.4
-	adafruit/Adafruit LPS2X@2.0.6
+  adafruit/Adafruit SHT31 Library@^2.2.2
-	adafruit/Adafruit SHT31 Library@2.2.2
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
-	adafruit/Adafruit PM25 AQI Sensor@1.1.1
+  adafruit/Adafruit MPU6050@^2.2.4
-	adafruit/Adafruit MPU6050@2.2.6
+  adafruit/Adafruit LIS3DH@^1.2.4
-	adafruit/Adafruit LIS3DH@1.3.0
+  adafruit/Adafruit AHTX0@^2.0.5
-	adafruit/Adafruit AHTX0@2.0.5
+  adafruit/Adafruit LSM6DS@^4.7.2
-	adafruit/Adafruit LSM6DS@4.7.3
+  adafruit/Adafruit VEML7700 Library@^2.1.6
-	adafruit/Adafruit VEML7700 Library@2.1.6
+  adafruit/Adafruit SHT4x Library@^1.0.4
-	adafruit/Adafruit SHT4x Library@1.0.5
+  adafruit/Adafruit TSL2591 Library@^1.4.5
-	adafruit/Adafruit TSL2591 Library@1.4.5
+  sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+  ClosedCube OPT3001@^1.1.2
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
+  emotibit/EmotiBit MLX90632@^1.0.8
-	ClosedCube OPT3001@1.1.2
+  dfrobot/DFRobot_RTU@^1.0.3
-	emotibit/EmotiBit MLX90632@1.0.8
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
-	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
+  boschsensortec/BME68x Sensor Library@^1.1.40407
-	adafruit/Adafruit MLX90614 Library@2.1.5
+  https://github.com/KodinLanewave/INA3221@^1.0.0
-	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
+  lewisxhe/SensorLib@^0.2.0
-	boschsensortec/BME68x Sensor Library@1.1.40407
+  mprograms/QMC5883LCompass@^1.2.0
-	https://github.com/KodinLanewave/INA3221@1.0.1
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
-	mprograms/QMC5883LCompass@1.2.3
+  https://github.com/meshtastic/i2c-sensor#8e97122268960593c8c279df1a84a29970136a8f
-	dfrobot/DFRobot_RTU@1.0.3
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d

release/latest/.gitignore

@@ -0,0 +1 @@
+curfirmwareversion.xml

src/AccelerometerThread.h

@@ -0,0 +1,297 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <SensorBMA423.hpp>
+#include <Wire.h>
+#ifdef RAK_4631
+#include "Fusion/Fusion.h"
+#include "graphics/Screen.h"
+#include "graphics/ScreenFonts.h"
+#include <Rak_BMX160.h>
+#endif
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+        acceleremoter_type = type;
+#ifndef RAK_4631
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+#endif
+        init();
+    }
+
+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
+            }
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160) {
+            sBmx160SensorData_t magAccel;
+            sBmx160SensorData_t gAccel;
+
+            /* Get a new sensor event */
+            bmx160.getAllData(&magAccel, NULL, &gAccel);
+
+            // expirimental calibrate routine. Limited to between 10 and 30 seconds after boot
+            if (millis() > 12 * 1000 && millis() < 30 * 1000) {
+                if (!showingScreen) {
+                    showingScreen = true;
+                    screen->startAlert((FrameCallback)drawFrameCalibration);
+                }
+                if (magAccel.x > highestX)
+                    highestX = magAccel.x;
+                if (magAccel.x < lowestX)
+                    lowestX = magAccel.x;
+                if (magAccel.y > highestY)
+                    highestY = magAccel.y;
+                if (magAccel.y < lowestY)
+                    lowestY = magAccel.y;
+                if (magAccel.z > highestZ)
+                    highestZ = magAccel.z;
+                if (magAccel.z < lowestZ)
+                    lowestZ = magAccel.z;
+            } else if (showingScreen && millis() >= 30 * 1000) {
+                showingScreen = false;
+                screen->endAlert();
+            }
+
+            int highestRealX = highestX - (highestX + lowestX) / 2;
+
+            magAccel.x -= (highestX + lowestX) / 2;
+            magAccel.y -= (highestY + lowestY) / 2;
+            magAccel.z -= (highestZ + lowestZ) / 2;
+            FusionVector ga, ma;
+            ga.axis.x = -gAccel.x; // default location for the BMX160 is on the rear of the board
+            ga.axis.y = -gAccel.y;
+            ga.axis.z = gAccel.z;
+            ma.axis.x = -magAccel.x;
+            ma.axis.y = -magAccel.y;
+            ma.axis.z = magAccel.z * 3;
+
+            // If we're set to one of the inverted positions
+            if (config.display.compass_orientation > meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270) {
+                ma = FusionAxesSwap(ma, FusionAxesAlignmentNXNYPZ);
+                ga = FusionAxesSwap(ga, FusionAxesAlignmentNXNYPZ);
+            }
+
+            float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
+
+            switch (config.display.compass_orientation) {
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+                heading += 90;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+                heading += 180;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+                heading += 270;
+                break;
+            }
+
+            screen->setHeading(heading);
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void init()
+    {
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160 && bmx160.begin()) {
+            bmx160.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ); // set output data rate
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        }
+    }
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
+#ifdef RAK_4631
+    bool showingScreen = false;
+    RAK_BMX160 bmx160;
+    float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+
+    static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+    {
+        int x_offset = display->width() / 2;
+        int y_offset = display->height() <= 80 ? 0 : 32;
+        display->setTextAlignment(TEXT_ALIGN_LEFT);
+        display->setFont(FONT_MEDIUM);
+        display->drawString(x, y, "Calibrating\nCompass");
+        int16_t compassX = 0, compassY = 0;
+        uint16_t compassDiam = graphics::Screen::getCompassDiam(display->getWidth(), display->getHeight());
+
+        // coordinates for the center of the compass/circle
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + display->getHeight() / 2;
+        } else {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + FONT_HEIGHT_SMALL + (display->getHeight() - FONT_HEIGHT_SMALL) / 2;
+        }
+        display->drawCircle(compassX, compassY, compassDiam / 2);
+        screen->drawCompassNorth(display, compassX, compassY, screen->getHeading() * PI / 180);
+    }
+#endif
+};
+
+#endif

src/AmbientLightingThread.h

@@ -21,7 +21,7 @@ namespace concurrency
 class AmbientLightingThread : public concurrency::OSThread
 {
   public:
-    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting")
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
     {
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
@@ -42,18 +42,18 @@ class AmbientLightingThread : public concurrency::OSThread
 #ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
-            LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
             disable();
             return;
         }
 #endif
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
-            LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
-        LOG_DEBUG("AmbientLighting init");
+        LOG_DEBUG("AmbientLightingThread initializing\n");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
@@ -106,27 +106,27 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(0);
         rgb.setGreen(0);
         rgb.setBlue(0);
-        LOG_INFO("OFF: NCP5623 Ambient lighting");
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
-        LOG_INFO("OFF: NeoPixel Ambient lighting");
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
 #endif
 #ifdef RGBLED_CA
         analogWrite(RGBLED_RED, 255 - 0);
         analogWrite(RGBLED_GREEN, 255 - 0);
         analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("OFF: Ambient light RGB Common Anode");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
         analogWrite(RGBLED_BLUE, 0);
-        LOG_INFO("OFF: Ambient light RGB Common Cathode");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
 #endif
 #ifdef UNPHONE
         unphone.rgb(0, 0, 0);
-        LOG_INFO("OFF: unPhone Ambient lighting");
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
 #endif
         return 0;
     }
@@ -138,8 +138,9 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
@@ -157,7 +158,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
         pixels.show();
-        LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -165,18 +166,18 @@ class AmbientLightingThread : public concurrency::OSThread
         analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
         unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }

src/AudioThread.h

@@ -16,7 +16,7 @@
 class AudioThread : public concurrency::OSThread
 {
   public:
-    AudioThread() : OSThread("Audio") { initOutput(); }
+    AudioThread() : OSThread("AudioThread") { initOutput(); }
 
     void beginRttl(const void *data, uint32_t len)
     {
@@ -64,7 +64,7 @@ class AudioThread : public concurrency::OSThread
     void initOutput()
     {
         audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
-        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
         audioOut->SetGain(0.2);
     };
 

src/ButtonThread.cpp

@@ -1,5 +1,4 @@
 #include "ButtonThread.h"
-#include "../userPrefs.h"
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
@@ -27,25 +26,20 @@ using namespace concurrency;
 ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
 
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
         this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
-#endif
-#ifdef USERPREFS_BUTTON_PIN
-    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
-#endif
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
@@ -53,7 +47,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #else
     this->userButton = OneButton(pin, true, true);
 #endif
-    LOG_DEBUG("Use GPIO%02d for button", pin);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
 #endif
 
 #ifdef INPUT_PULLUP_SENSE
@@ -65,7 +59,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 #endif
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
     userButton.attachClick(userButtonPressed);
     userButton.setClickMs(BUTTON_CLICK_MS);
     userButton.setPressMs(BUTTON_LONGPRESS_MS);
@@ -108,7 +102,7 @@ int32_t ButtonThread::runOnce()
     // If the button is pressed we suppress CPU sleep until release
     canSleep = true; // Assume we should not keep the board awake
 
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
+#if defined(BUTTON_PIN)
     userButton.tick();
     canSleep &= userButton.isIdle();
 #elif defined(ARCH_PORTDUINO)
@@ -129,19 +123,9 @@ int32_t ButtonThread::runOnce()
     if (btnEvent != BUTTON_EVENT_NONE) {
         switch (btnEvent) {
         case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!");
+            LOG_BUTTON("press!\n");
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                return 50;
-            }
 #ifdef BUTTON_PIN
-#if !defined(USERPREFS_BUTTON_PIN)
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
-#endif
                  moduleConfig.canned_message.inputbroker_pin_press) ||
                 !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
                 !moduleConfig.canned_message.enabled) {
@@ -159,7 +143,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!");
+            LOG_BUTTON("Double press!\n");
             service->refreshLocalMeshNode();
             auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
@@ -173,7 +157,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
             switch (multipressClickCount) {
 #if HAS_GPS
             // 3 clicks: toggle GPS
@@ -200,7 +184,7 @@ int32_t ButtonThread::runOnce()
         } // end multipress event
 
         case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!");
+            LOG_BUTTON("Long press!\n");
             powerFSM.trigger(EVENT_PRESS);
             if (screen) {
                 screen->startAlert("Shutting down...");
@@ -212,7 +196,7 @@ int32_t ButtonThread::runOnce()
         // Do actual shutdown when button released, otherwise the button release
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press");
+            LOG_INFO("Shutdown from long press\n");
             playShutdownMelody();
             delay(3000);
             power->shutdown();
@@ -221,7 +205,7 @@ int32_t ButtonThread::runOnce()
 
 #ifdef BUTTON_PIN_TOUCH
         case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!");
+            LOG_BUTTON("Touch press!\n");
             if (screen) {
                 // Wake if asleep
                 if (powerFSM.getState() == &stateDARK)
@@ -255,12 +239,7 @@ void ButtonThread::attachButtonInterrupts()
 #elif defined(BUTTON_PIN)
     // Interrupt for user button, during normal use. Improves responsiveness.
     attachInterrupt(
-#if !defined(USERPREFS_BUTTON_PIN)
         config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
-#endif
         []() {
             ButtonThread::userButton.tick();
             runASAP = true;
@@ -289,13 +268,8 @@ void ButtonThread::detachButtonInterrupts()
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
         detachInterrupt(settingsMap[user]);
 #elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
     detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #endif
-#if defined(USERPREFS_BUTTON_PIN)
-    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
-#endif
-#endif
 
 #ifdef BUTTON_PIN_ALT
     detachInterrupt(BUTTON_PIN_ALT);
@@ -336,7 +310,7 @@ void ButtonThread::userButtonMultiPressed(void *callerThread)
 // Non-static method, runs during callback. Grabs info while still valid
 void ButtonThread::storeClickCount()
 {
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
+#ifdef BUTTON_PIN
     multipressClickCount = userButton.getNumberClicks();
 #endif
 }

src/ButtonThread.h

@@ -38,7 +38,7 @@ class ButtonThread : public concurrency::OSThread
     void storeClickCount();
 
   private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
     static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT

src/FSCommon.cpp

@@ -24,16 +24,11 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
-#if defined(ARCH_APOLLO3)
+#if defined(ARCH_STM32WL)
-// Apollo series 2 Kbytes (8 rows of 256 bytes)
 
 uint16_t OSFS::startOfEEPROM = 1;
 uint16_t OSFS::endOfEEPROM = 2048;
 
-// Useful consts
-const OSFS::result noerr = OSFS::result::NO_ERROR;
-const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
-
 // 3) How do I read from the medium?
 void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
 {
@@ -58,7 +53,7 @@ bool lfs_assert_failed =
 
 extern "C" void lfs_assert(const char *reason)
 {
-    LOG_ERROR("LFS assert: %s", reason);
+    LOG_ERROR("LFS assert: %s\n", reason);
     lfs_assert_failed = true;
 }
 
@@ -71,7 +66,7 @@ extern "C" void lfs_assert(const char *reason)
  */
 bool copyFile(const char *from, const char *to)
 {
-#if defined(ARCH_STM32WL) || defined(ARCH_APOLLO3)
+#ifdef ARCH_STM32WL
     unsigned char cbuffer[2048];
 
     // Var to hold the result of actions
@@ -80,19 +75,19 @@ bool copyFile(const char *from, const char *to)
     r = OSFS::getFile(from, cbuffer);
 
     if (r == notfound) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     } else if (r == noerr) {
         r = OSFS::newFile(to, cbuffer, true);
         if (r == noerr) {
             return true;
         } else {
-            LOG_ERROR("OSFS Error %d", r);
+            LOG_ERROR("OSFS Error %d\n", r);
             return false;
         }
 
     } else {
-        LOG_ERROR("OSFS Error %d", r);
+        LOG_ERROR("OSFS Error %d\n", r);
         return false;
     }
     return true;
@@ -102,13 +97,13 @@ bool copyFile(const char *from, const char *to)
 
     File f1 = FSCom.open(from, FILE_O_READ);
     if (!f1) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     }
 
     File f2 = FSCom.open(to, FILE_O_WRITE);
     if (!f2) {
-        LOG_ERROR("Failed to open destination file %s", to);
+        LOG_ERROR("Failed to open destination file %s\n", to);
         return false;
     }
 
@@ -134,7 +129,7 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#if defined(ARCH_STM32WL) || defined(ARCH_APOLLO3)
+#ifdef ARCH_STM32WL
     if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
         return true;
     } else {
@@ -236,7 +231,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #ifdef ARCH_ESP32
                 listDir(file.path(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Remove %s", file.path());
+                    LOG_DEBUG("Removing %s\n", file.path());
                     strncpy(buffer, file.path(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -246,7 +241,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
                 listDir(file.name(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Remove %s", file.name());
+                    LOG_DEBUG("Removing %s\n", file.name());
                     strncpy(buffer, file.name(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -254,7 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                     file.close();
                 }
 #else
-                LOG_DEBUG(" %s (directory)", file.name());
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -262,26 +257,26 @@ void listDir(const char *dirname, uint8_t levels, bool del)
         } else {
 #ifdef ARCH_ESP32
             if (del) {
-                LOG_DEBUG("Delete %s", file.path());
+                LOG_DEBUG("Deleting %s\n", file.path());
                 strncpy(buffer, file.path(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.path(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
                 file.close();
             }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
             if (del) {
-                LOG_DEBUG("Delete %s", file.name());
+                LOG_DEBUG("Deleting %s\n", file.name());
                 strncpy(buffer, file.name(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.name(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
                 file.close();
             }
 #else
-            LOG_DEBUG("   %s (%i Bytes)", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }
@@ -289,7 +284,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #ifdef ARCH_ESP32
     if (del) {
-        LOG_DEBUG("Remove %s", root.path());
+        LOG_DEBUG("Removing %s\n", root.path());
         strncpy(buffer, root.path(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -298,7 +293,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     if (del) {
-        LOG_DEBUG("Remove %s", root.name());
+        LOG_DEBUG("Removing %s\n", root.name());
         strncpy(buffer, root.name(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -334,13 +329,13 @@ void fsInit()
 {
 #ifdef FSCom
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount failed");
+        LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
-    LOG_DEBUG("Filesystem files (%d/%d Bytes):", FSCom.usedBytes(), FSCom.totalBytes());
+    LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
 #else
-    LOG_DEBUG("Filesystem files:");
+    LOG_DEBUG("Filesystem files:\n");
 #endif
     listDir("/", 10);
 #endif
@@ -355,28 +350,28 @@ void setupSDCard()
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
-        LOG_DEBUG("No SD_MMC card detected");
+        LOG_DEBUG("No SD_MMC card detected\n");
         return;
     }
     uint8_t cardType = SD.cardType();
     if (cardType == CARD_NONE) {
-        LOG_DEBUG("No SD_MMC card attached");
+        LOG_DEBUG("No SD_MMC card attached\n");
         return;
     }
     LOG_DEBUG("SD_MMC Card Type: ");
     if (cardType == CARD_MMC) {
-        LOG_DEBUG("MMC");
+        LOG_DEBUG("MMC\n");
     } else if (cardType == CARD_SD) {
-        LOG_DEBUG("SDSC");
+        LOG_DEBUG("SDSC\n");
     } else if (cardType == CARD_SDHC) {
-        LOG_DEBUG("SDHC");
+        LOG_DEBUG("SDHC\n");
     } else {
-        LOG_DEBUG("UNKNOWN");
+        LOG_DEBUG("UNKNOWN\n");
     }
 
     uint64_t cardSize = SD.cardSize() / (1024 * 1024);
-    LOG_DEBUG("SD Card Size: %lu MB", (uint32_t)cardSize);
+    LOG_DEBUG("SD Card Size: %lluMB\n", cardSize);
-    LOG_DEBUG("Total space: %lu MB", (uint32_t)(SD.totalBytes() / (1024 * 1024)));
+    LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
-    LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
+    LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
 }

src/FSCommon.h

@@ -24,25 +24,6 @@ const OSFS::result noerr = OSFS::result::NO_ERROR;
 const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
-#if defined(ARCH_APOLLO3)
-// Apollo series 2 Kbytes (8 rows of 256 bytes)
-#include <EEPROM.h>
-#include <OSFS.h>
-
-extern uint16_t OSFS::startOfEEPROM;
-extern uint16_t OSFS::endOfEEPROM;
-
-// Useful consts
-extern const OSFS::result noerr;
-extern const OSFS::result notfound;
-
-// 3) How do I read from the medium?
-void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output);
-
-// 4) How to I write to the medium?
-void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input);
-#endif
-
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"

src/GPSStatus.h

@@ -50,6 +50,9 @@ class GPSStatus : public Status
     int32_t getLatitude() const
     {
         if (config.position.fixed_position) {
+#ifdef GPS_EXTRAVERBOSE
+            LOG_WARN("Using fixed latitude\n");
+#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
         } else {
@@ -60,6 +63,9 @@ class GPSStatus : public Status
     int32_t getLongitude() const
     {
         if (config.position.fixed_position) {
+#ifdef GPS_EXTRAVERBOSE
+            LOG_WARN("Using fixed longitude\n");
+#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
         } else {
@@ -70,6 +76,9 @@ class GPSStatus : public Status
     int32_t getAltitude() const
     {
         if (config.position.fixed_position) {
+#ifdef GPS_EXTRAVERBOSE
+            LOG_WARN("Using fixed altitude\n");
+#endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
         } else {
@@ -85,8 +94,8 @@ class GPSStatus : public Status
 
     bool matches(const GPSStatus *newStatus) const
     {
-#ifdef GPS_DEBUG
+#ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x", newStatus->p.timestamp, p.timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -103,7 +112,7 @@ class GPSStatus : public Status
 
         if (isDirty && p.timestamp && (newStatus->p.timestamp == p.timestamp)) {
             // We can NEVER be in two locations at the same time! (also PR #886)
-            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution");
+            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution\n");
         }
 
         initialized = true;
@@ -115,11 +124,11 @@ class GPSStatus : public Status
         if (isDirty) {
             if (hasLock) {
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
-                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
+                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
             } else {
-                LOG_DEBUG("No GPS lock");
+                LOG_DEBUG("No GPS lock\n");
             }
             onNewStatus.notifyObservers(this);
         }

src/GpioLogic.cpp

@@ -12,6 +12,7 @@ void GpioVirtPin::set(bool value)
 
 void GpioHwPin::set(bool value)
 {
+    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
     pinMode(num, OUTPUT);
     digitalWrite(num, value);
 }
@@ -65,7 +66,7 @@ GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *i
     assert(!inPin2->dependentPin); // We only allow one dependent pin
     inPin2->dependentPin = this;
 
-    // Don't update at construction time, because various GpioPins might be global constructor based not yet initiated because
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
     // order of operations for global constructors is not defined.
     // update();
 }
@@ -87,6 +88,7 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
+            // LOG_DEBUG("Doing GPIO OR\n");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:

src/NodeStatus.h

@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -13,7 +13,6 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
-#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -31,7 +30,6 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
-
 #endif
 
 #ifndef DELAY_FOREVER
@@ -77,15 +75,6 @@ INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-#include "modules/Telemetry/Sensor/MAX17048Sensor.h"
-#include <utility>
-extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
-#if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
-MAX17048Sensor max17048Sensor;
-#endif
-#endif
-
 #if HAS_RAKPROT && !defined(ARCH_PORTDUINO)
 RAK9154Sensor rak9154Sensor;
 #endif
@@ -147,23 +136,14 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
-#ifdef BATTERY_PIN
-
 static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLUP);
-#else
-#ifdef HELTEC_V3
-    pinMode(ADC_CTRL, INPUT);
-    uint8_t adc_ctl_enable_value = !(digitalRead(ADC_CTRL));
-    pinMode(ADC_CTRL, OUTPUT);
-    digitalWrite(ADC_CTRL, adc_ctl_enable_value);
 #else
     pinMode(ADC_CTRL, OUTPUT);
     digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-#endif
 #endif
     delay(10);
 #endif
@@ -174,24 +154,17 @@ static void adcDisable()
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLDOWN);
-#else
-#ifdef HELTEC_V3
-    pinMode(ADC_CTRL, ANALOG);
 #else
     digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
 #endif
 #endif
-#endif
 }
 
-#endif
-
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
-  public:
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
      */
@@ -251,6 +224,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -270,7 +244,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (!initial_read_done || !Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
+        if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
@@ -300,7 +274,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
             // (last_read_value));
         }
         return last_read_value;
@@ -345,7 +319,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 raw += adc_buf;
                 raw_c++; // Count valid samples
             } else {
-                LOG_DEBUG("An attempt to sample ADC2 failed");
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
             }
         }
 
@@ -370,12 +344,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    // if we have a integrated device with a battery, we can assume that the battery is always connected
-#ifdef BATTERY_IMMUTABLE
-    virtual bool isBatteryConnect() override { return true; }
-#else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
-#endif
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
@@ -510,7 +479,7 @@ bool Power::analogInit()
 #endif
 
 #ifdef BATTERY_PIN
-    LOG_DEBUG("Use analog input %d for battery level", BATTERY_PIN);
+    LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
@@ -541,18 +510,18 @@ bool Power::analogInit()
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
     // show ADC characterization base
     if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        LOG_INFO("ADC config based on Two Point values stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        LOG_INFO("ADC config based on reference voltage stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
     }
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse");
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
     }
 #endif
     else {
-        LOG_INFO("ADC config based on default reference voltage");
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
     }
 #endif // ARCH_ESP32
 
@@ -582,12 +551,7 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    // initialise one power sensor (only)
+    bool found = axpChipInit() || analogInit();
-    bool found = axpChipInit();
-    if (!found)
-        found = lipoInit();
-    if (!found)
-        found = analogInit();
 
 #ifdef NRF_APM
     found = true;
@@ -601,9 +565,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    LOG_INFO("Shutting down");
+    LOG_INFO("Shutting down\n");
 
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -613,7 +577,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, false);
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }
 
@@ -639,7 +603,7 @@ void Power::readPowerStatus()
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
                 // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
-                // In that case, we compute an estimate of the charge percent based on open circuit voltage table defined
+                // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
                 // in power.h
                 batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
                                                    ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
@@ -656,7 +620,7 @@ void Power::readPowerStatus()
                // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
-    // LOG_DEBUG("NRF Power %d", nrf_usb_state);
+    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
@@ -669,22 +633,22 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        std::string threadlist = "Threads running:";
+        LOG_DEBUG("Threads running:");
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                threadlist += vformat(" %s", thread->ThreadName.c_str());
+                LOG_DEBUG(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG("\n");
-        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
@@ -717,13 +681,13 @@ void Power::readPowerStatus()
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
-            LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
+            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
             if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
                 // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
+                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
 #else
-                LOG_INFO("Low voltage detected, trigger deep sleep");
+                LOG_INFO("Low voltage detected, triggering deep sleep\n");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
             }
@@ -745,12 +709,12 @@ int32_t Power::runOnce()
         PMU->getIrqStatus();
 
         if (PMU->isVbusRemoveIrq()) {
-            LOG_INFO("USB unplugged");
+            LOG_INFO("USB unplugged\n");
             powerFSM.trigger(EVENT_POWER_DISCONNECTED);
         }
 
         if (PMU->isVbusInsertIrq()) {
-            LOG_INFO("USB plugged In");
+            LOG_INFO("USB plugged In\n");
             powerFSM.trigger(EVENT_POWER_CONNECTED);
         }
 
@@ -758,21 +722,21 @@ int32_t Power::runOnce()
         Other things we could check if we cared...
 
         if (PMU->isBatChagerStartIrq()) {
-            LOG_DEBUG("Battery start charging");
+            LOG_DEBUG("Battery start charging\n");
         }
         if (PMU->isBatChagerDoneIrq()) {
-            LOG_DEBUG("Battery fully charged");
+            LOG_DEBUG("Battery fully charged\n");
         }
         if (PMU->isBatInsertIrq()) {
-            LOG_DEBUG("Battery inserted");
+            LOG_DEBUG("Battery inserted\n");
         }
         if (PMU->isBatRemoveIrq()) {
-            LOG_DEBUG("Battery removed");
+            LOG_DEBUG("Battery removed\n");
         }
         */
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
-            LOG_DEBUG("PEK long button press");
+            LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
 #endif
@@ -815,22 +779,22 @@ bool Power::axpChipInit()
     if (!PMU) {
         PMU = new XPowersAXP2101(*w);
         if (!PMU->init()) {
-            LOG_WARN("No AXP2101 power management");
+            LOG_WARN("Failed to find AXP2101 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP2101 PMU init succeeded");
+            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
         }
     }
 
     if (!PMU) {
         PMU = new XPowersAXP192(*w);
         if (!PMU->init()) {
-            LOG_WARN("No AXP192 power management");
+            LOG_WARN("Failed to find AXP192 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP192 PMU init succeeded");
+            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU\n");
         }
     }
 
@@ -986,54 +950,56 @@ bool Power::axpChipInit()
     PMU->enableVbusVoltageMeasure();
     PMU->enableBattVoltageMeasure();
 
+    LOG_DEBUG("=======================================================================\n");
     if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
-        LOG_DEBUG("DC1  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
+        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
-        LOG_DEBUG("DC2  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
+        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
-        LOG_DEBUG("DC3  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
+        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
-        LOG_DEBUG("DC4  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
+        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
-        LOG_DEBUG("LDO2 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
+        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
-        LOG_DEBUG("LDO3 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
+        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
-        LOG_DEBUG("ALDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
+        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
-        LOG_DEBUG("ALDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
+        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
-        LOG_DEBUG("ALDO3: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
+        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
-        LOG_DEBUG("ALDO4: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
+        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
-        LOG_DEBUG("BLDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
+        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
-        LOG_DEBUG("BLDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
+        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
+    LOG_DEBUG("=======================================================================\n");
 
 // We can safely ignore this approach for most (or all) boards because MCU turned off
 // earlier than battery discharged to 2.6V.
@@ -1077,81 +1043,3 @@ bool Power::axpChipInit()
     return false;
 #endif
 }
-
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-
-/**
- * Wrapper class for an I2C MAX17048 Lipo battery sensor.
- */
-class LipoBatteryLevel : public HasBatteryLevel
-{
-  private:
-    MAX17048Singleton *max17048 = nullptr;
-
-  public:
-    /**
-     * Init the I2C MAX17048 Lipo battery level sensor
-     */
-    bool runOnce()
-    {
-        if (max17048 == nullptr) {
-            max17048 = MAX17048Singleton::GetInstance();
-        }
-
-        // try to start if the sensor has been detected
-        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].first != 0) {
-            return max17048->runOnce(nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].second);
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return max17048->getBusBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return max17048->getBusVoltageMv(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return max17048->isBatteryConnected(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return max17048->isExternallyPowered(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return max17048->isBatteryCharging(); }
-};
-
-LipoBatteryLevel lipoLevel;
-
-/**
- * Init the Lipo battery level sensor
- */
-bool Power::lipoInit()
-{
-    bool result = lipoLevel.runOnce();
-    LOG_DEBUG("Power::lipoInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoLevel;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -53,21 +53,16 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_DEBUG("State: SDS");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
-static void lowBattSDSEnter()
-{
-    LOG_DEBUG("State: Lower batt SDS");
-    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
-}
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_DEBUG("State: SHUTDOWN");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -77,16 +72,16 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
-    // LOG_INFO("lsEnter end");
+    // LOG_INFO("lsEnter end\n");
 }
 
 static void lsIdle()
 {
-    // LOG_INFO("lsIdle begin ls_secs=%u", getPref_ls_secs());
+    // LOG_INFO("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
 
 #ifdef ARCH_ESP32
 
@@ -110,7 +105,7 @@ static void lsIdle()
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
-                // LOG_INFO("Sleep, flash led!");
+                // LOG_INFO("sleeping, flash led!\n");
                 break;
 
             case ESP_SLEEP_WAKEUP_UART:
@@ -142,7 +137,7 @@ static void lsIdle()
     } else {
         // Time to stop sleeping!
         ledBlink.set(false);
-        LOG_INFO("Reached ls_secs, service loop()");
+        LOG_INFO("Reached ls_secs, servicing loop()\n");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
 #endif
@@ -150,12 +145,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_INFO("Exit state: LS");
+    LOG_INFO("Exit state: LS\n");
 }
 
 static void nbEnter()
 {
-    LOG_DEBUG("State: NB");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -173,7 +168,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_DEBUG("State: SERIAL");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -188,10 +183,10 @@ static void serialExit()
 
 static void powerEnter()
 {
-    // LOG_DEBUG("State: POWER");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
-        // If we got here, we are in the wrong state - we should be in powered, let that state handle things
+        // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
         screen->setOn(true);
@@ -210,7 +205,7 @@ static void powerIdle()
 {
     if (!isPowered()) {
         // If we got here, we are in the wrong state
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     }
 }
@@ -227,7 +222,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_DEBUG("State: ON");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -235,7 +230,7 @@ static void onEnter()
 static void onIdle()
 {
     if (isPowered()) {
-        // If we got here, we are in the wrong state - we should be in powered, let that state handle things
+        // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
     }
 }
@@ -247,12 +242,11 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_DEBUG("State: BOOT");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
 State stateSDS(sdsEnter, NULL, NULL, "SDS");
-State stateLowBattSDS(lowBattSDSEnter, NULL, NULL, "SDS");
 State stateLS(lsEnter, lsIdle, lsExit, "LS");
 State stateNB(nbEnter, NULL, NULL, "NB");
 State stateDARK(darkEnter, NULL, NULL, "DARK");
@@ -270,7 +264,7 @@ void PowerFSM_setup()
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
-    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
+    LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
     // wake timer expired or a packet arrived
@@ -297,12 +291,12 @@ void PowerFSM_setup()
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
-    powerFSM.add_transition(&stateBOOT, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateLS, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateLS, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateNB, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateNB, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateDARK, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateDARK, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateON, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateON, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateSERIAL, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateSERIAL, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
 
     // Handle being told to power off
     powerFSM.add_transition(&stateBOOT, &stateSHUTDOWN, EVENT_SHUTDOWN, NULL, "Shutdown");
@@ -377,7 +371,7 @@ void PowerFSM_setup()
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
     // See: https://github.com/meshtastic/firmware/issues/1071
-    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiated through the
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
     // modules
     if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,

src/PowerMon.cpp

@@ -35,7 +35,7 @@ void PowerMon::emitLog(const char *reason)
 {
 #ifdef USE_POWERMON
     // The nrf52 printf doesn't understand 64 bit ints, so if we ever reach that point this function will need to change.
-    LOG_INFO("S:PM:0x%08lx,%s", (uint32_t)states, reason);
+    LOG_INFO("S:PM:0x%08lx,%s\n", (uint32_t)states, reason);
 #endif
 }