Bump to .27

Fix formula to consider Bandwidth in kHz

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -0,0 +1,76 @@
+name: Bug Report
+description: File a bug report
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for taking the time to fill out this bug report!
+
+  - type: dropdown
+    id: category
+    attributes:
+      label: Category
+      description: How would you catagorize this issue?
+      multiple: true
+      options:
+        - Hardware Compatibility
+        - BLE
+        - Serial
+        - WiFi
+        - Other
+    validations:
+      required: true
+
+  - type: dropdown
+    id: hardware
+    attributes:
+      label: Hardware
+      description: What hardware are you encountering this issue on?
+      multiple: true
+      options:
+        - Not Applicable
+        - T-Beam
+        - T-Beam 0.7
+        - T-Lora v1
+        - T-Lora v1.3
+        - T-Lora v2 1.6
+        - T-Echo
+        - Rak4631
+        - Rak11200
+        - Heltec v1
+        - Heltec v2
+        - Heltec v2.1
+        - Relay v1
+        - Relay v2
+        - DIY
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: version
+    attributes:
+      label: Firmware Version
+      description: This can be found on the device's screen or via one of the apps.
+      placeholder: x.x.x.yyyyyyy
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide details on what steps you performed for this to happen.
+    validations:
+      required: true
+
+  - type: textarea
+    id: logs
+    attributes:
+      label: Relevant log output
+      description: If you have any log output to help in diagnosing your bug, please provide it here.
+      render: Shell
+    validations:
+      required: false

.github/ISSUE_TEMPLATE/New Board.yml

@@ -0,0 +1,46 @@
+name: New Board
+description: Request us to support new hardware
+title: "[Board]: "
+labels: ["enhancement", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for requesting a new board, this will not gurantee that we will support it, but will be on our radar.
+
+  - type: dropdown
+    id: soc
+    attributes:
+      label: SOC
+      description: What SOC does your board have?
+      multiple: true
+      options:
+        - NRF52
+        - ESP32
+        - Other
+    validations:
+      required: true
+
+  - type: input
+    id: lora
+    attributes:
+      label: Lora IC
+      description: What LoRa IC does the board have?
+    validations:
+      required: true
+      
+  - type: input
+    id: link
+    attributes:
+      label: Product Link
+      description: Where can we find this product?
+    validations:
+      required: true
+
+  - type: textarea
+    id: body
+    attributes:
+      label: Description
+      description: Please provide any further details you think we may need.
+    validations:
+      required: true

.github/ISSUE_TEMPLATE/bug-report-or-feature-proposal.md

@@ -1,38 +0,0 @@
----
-name: Bug report or feature proposal
-about: Create a report to help us improve
-title: ''
-labels: ''
-assignees: ''
-
----
-
-Please - if you just have a question (i.e. not a bug report or a feature proposal), post in our [forum](https://meshtastic.discourse.group/) instead.
-
-**Describe the bug**
-A clear and concise description of what the bug is.
-
-**To Reproduce**
-Steps to reproduce the behavior:
-1. Go to '...'
-2. Click on '....'
-3. Scroll down to '....'
-4. See error
-
-**Expected behavior**
-A clear and concise description of what you expected to happen.
-
-**Screenshots**
-If applicable, add screenshots to help explain your problem.
-
-**Device info:**
- - Device model: [e.g. TBEAM]
- - Software Version [e.g. 0.7.8]
-
-**Smartphone information (if relevant):**
- - Device: [e.g. iPhone6]
- - OS: [e.g. iOS8.1]
- - App Version [e.g. 0.7.2]
-
-**Additional context**
-Add any other context about the problem here.

.github/pull_request_template.md

@@ -7,7 +7,7 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor,
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
   because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.

.github/workflows/main.yml

@@ -1,26 +0,0 @@
-name: Continuous Integration
-on:
-  - push
-  - pull_request
-
-jobs:
-  main:
-    name: Main
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@master
-      - name: Checkout submodules
-        uses: textbook/git-checkout-submodule-action@master
-      - name: Setup Python
-        uses: actions/setup-python@master
-        with:
-          python-version: 3.x
-      - name: Install Platform IO
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio
-      - name: Install extra python tools
-        run: |
-          pip install -U adafruit-nrfutil
-      - name: Build
-        run: platformio run -e tbeam -e heltec -e lora-relay-v1 -e linux

.github/workflows/main_matrix.yml

@@ -0,0 +1,350 @@
+name: CI
+on:
+  # # Triggers the workflow on push but only for the master branch
+  push:
+    branches: [master]
+    paths-ignore:
+      - "**.md"
+      - "**.yml"
+      - "version.properties"
+
+  # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
+  pull_request_target:
+    branches: [master]
+    paths-ignore:
+      - "**.md"
+      - "**.yml"
+
+  workflow_dispatch:
+
+jobs:
+  check:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: rak11200
+          - board: tlora-v2
+          - board: tlora-v1
+          - board: tlora_v1_3
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v1
+          - board: heltec-v2.0
+          - board: heltec-v2.1
+          - board: tbeam0.7
+          - board: meshtastic-diy-v1
+          - board: rak4631
+          - board: rak4631_eink
+          - board: t-echo
+          - board: nano-g1
+          - board: m5stack-core
+          - board: m5stack-coreink
+          
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install cppcheck
+        run: |
+          sudo apt-get install -y cppcheck
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v1
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools and install platformio
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Check ${{ matrix.board }}
+        run: bin/check-all.sh ${{ matrix.board }}
+
+  build-esp32:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: rak11200
+          - board: tlora-v2
+          - board: tlora-v1
+          - board: tlora_v1_3
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v1
+          - board: heltec-v2.0
+          - board: heltec-v2.1
+          - board: tbeam0.7
+          - board: meshtastic-diy-v1
+          - board: nano-g1
+          - board: m5stack-core
+          - board: m5stack-coreink
+
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v1
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil littlefs-python
+          pip install -U --pre meshtastic
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/meshtastic-web"
+          file: "build.tar"
+          target: "build.tar"
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ matrix.board }}
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v2
+        with:
+          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf
+          retention-days: 90
+
+  build-nrf52:
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        include:
+          - board: rak4631
+          - board: rak4631_eink
+          - board: t-echo
+          - board: pca10059_diy_eink
+
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v1
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U --pre meshtastic
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Build NRF52
+        run: bin/build-nrf52.sh ${{ matrix.board }}
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v2
+        with:
+          name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.uf2
+            release/*.elf
+          retention-days: 90
+
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      - name: Cache python libs
+        uses: actions/cache@v1
+        id: cache-pip # needed in if test
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip
+
+      - name: Upgrade python tools
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U --pre meshtastic
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+      - name: Integration test
+        run: |
+          .pio/build/native/program &
+          sleep 20 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v2
+        with:
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_amd64
+            release/device-*.sh
+            release/device-*.bat
+          retention-days: 90
+
+  after-checks:
+    runs-on: ubuntu-latest
+    needs: [check]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+  gather-artifacts:
+    runs-on: ubuntu-latest
+    needs: [build-esp32, build-nrf52, build-native]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v2
+        with:
+          path: ./
+
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+
+      - name: Move files up
+        run: mv -b -t ./ ./*tbeam-*/littlefs*.bin ./*tbeam-*/system-info.bin ./**/firmware*.bin ./**/*.uf2 ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v2
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: |
+            ./*.bin
+            ./*.uf2
+            ./meshtasticd_linux_amd64
+            ./device-*.sh
+            ./device-*.bat
+          retention-days: 90
+
+      - uses: actions/download-artifact@v2
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Zip firmware
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v2
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./*.elf
+          retention-days: 90
+
+      - name: Create request artifacts
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v1.0.0
+        with:
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts-dir: pr
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip

.github/workflows/release.yml

@@ -0,0 +1,92 @@
+name: Make Release
+on:
+  # Can optionally take parameters from the github UI, more info here https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/#:~:text=You%20can%20now%20create%20workflows,the%20workflow%20is%20run%20on.
+  workflow_dispatch:
+  #  inputs:
+
+  # Only want to run if version.properties is bumped in master
+  push:
+    branches:
+      - master
+    paths:
+      - "version.properties"
+
+jobs:
+  release-build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: "recursive"
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.x
+
+      # Will be available in steps.version.outputs.version
+      - name: Get release version string
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+        id: version
+      # Note: we don't use caches on release builds because we don't want to accidentally not have a virgin build machine
+
+      - name: Upgrade python tools
+        # We actually want to run this every time
+        # if: steps.cache-pip.outputs.cache-hit != 'true'
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio meshtastic adafruit-nrfutil littlefs-python
+
+      - name: Upgrade platformio
+        run: |
+          pio upgrade
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: "meshtastic/meshtastic-web"
+          file: "build.tar"
+          target: "build.tar"
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Build everything
+        run: bin/build-all.sh
+
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: ${{ steps.version.outputs.version }} alpha
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: release/archive/elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip

.github/workflows/update_protobufs.yml

@@ -0,0 +1,33 @@
+name: "Update protobufs and regenerate classes"
+on: workflow_dispatch
+
+jobs:
+  update-protobufs:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+
+      - name: Update submodule
+        run: |
+          git submodule update --remote protobufs
+
+      - name: Download nanopb
+        run: |
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.6-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.6-linux-x86.tar.gz
+          mv nanopb-0.4.6-linux-x86 nanopb-0.4.6
+
+      - name: Re-generate protocol buffers
+        run: |
+          ./bin/regen-protos.sh
+
+      - name: Create pull request
+        uses: peter-evans/create-pull-request@v3
+        with:
+          add-paths: |
+            protobufs
+            src/mesh

.gitignore

@@ -9,13 +9,23 @@ main/credentials.h
 !.vscode/extensions.json
 *.code-workspace
 
+.idea
+
 .DS_Store
 Thumbs.db
 .autotools
 .built
 .context
 .cproject
-.idea/*
 .vagrant
-
+nanopb*
 flash.uf2
+cmake-build*
+__pycache__
+
+*.swp
+*.swo
+*~
+
+venv/
+release/

.gitmodules

@@ -1,6 +1,3 @@
-[submodule "proto"]
-	path = proto
+[submodule "protobufs"]
+	path = protobufs
 	url = https://github.com/meshtastic/Meshtastic-protobufs.git
-[submodule "sdk-nrfxlib"]
-	path = sdk-nrfxlib
-	url = https://github.com/nrfconnect/sdk-nrfxlib.git

.vscode/extensions.json

@@ -2,6 +2,10 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+        "platformio.platformio-ide",
+        "xaver.clang-format"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
     ]
 }

.vscode/settings.json

@@ -49,7 +49,10 @@
         "string_view": "cpp",
         "cassert": "cpp",
         "iterator": "cpp",
-        "shared_mutex": "cpp"
+        "shared_mutex": "cpp",
+        "iostream": "cpp",
+        "esp_nimble_hci.h": "c",
+        "map": "cpp"
     },
     "cSpell.words": [
         "Blox",
@@ -67,5 +70,9 @@
         "protobufs",
         "wifi"
     ],
-    "C_Cpp.dimInactiveRegions": true
+    "C_Cpp.dimInactiveRegions": true,
+    "cmake.configureOnOpen": true,
+    "protoc": {
+        "compile_on_save": false,
+    }
 }

README.md

@@ -1,207 +1,19 @@
-# Meshtastic-device
+# Meshtastic Firmware
 
-This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.
+![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/meshtastic-device/total)
+[![CI](https://img.shields.io/github/workflow/status/meshtastic/Meshtastic-device/CI?label=actions&logo=github&color=yellow)](https://github.com/meshtastic/repo/actions/workflows/main_matrix.yml)
+[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/Meshtastic-device)](https://cla-assistant.io/meshtastic/Meshtastic-device)
+[![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
+[![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
-![Continuous Integration](https://github.com/meshtastic/Meshtastic-esp32/workflows/Continuous%20Integration/badge.svg)
+## Overview
 
-Meshtastic™ is a project that lets you use
-inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
-essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
-members and any text messages sent to your group chat.
+This repository contains the device firmware for the Meshtastic project.
 
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios
-will optionally work with your phone, but no phone is required.
 
-Typical time between recharging the radios should be about eight days.
+**[Building Instructions](https://meshtastic.org/docs/developers/Firmware/build)**
+**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
-This project is is currently in beta-testing - if you have questions please [join our discussion forum](https://meshtastic.discourse.group/).
+## Stats
 
-This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the chat.
-
-## Supported hardware
-
-We currently support three models of radios.
-
-- TTGO T-Beam (usually the recommended choice)
-  - [T-Beam V1.1 w/ NEO-6M - special Meshtastic version](https://www.aliexpress.com/item/4001178678568.html) (Includes built-in OLED display and they have **preinstalled** the meshtastic software)
-  - [T-Beam V1.1 w/ NEO-M8N](https://www.aliexpress.com/item/33047631119.html) (slightly better GPS)
-  - [T-Beam V1.1 w/ NEO-M8N /w SX1262](https://www.aliexpress.com/item/4001287221970.html) (slightly better GPS + LoRa)
-    - board labels "TTGO T22_V1.1 20191212"
-  - [T-Beam V0.7 w/ NEO-6M](https://www.aliexpress.com/item/4000574335430.html) (will work but **you must use the tbeam0.7 firmware ** - but the T-Beam V1.0 or later are better!)
-     - board labels "TTGO T22_V07 20180711"
-  - 3D printable cases
-    - [T-Beam V0](https://www.thingiverse.com/thing:3773717)
-    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:3830711)
-    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297)
-  - Laser-cut cases
-    - [T-Beam V1](https://www.thingiverse.com/thing:4552771)
-
-- [TTGO LORA32](https://www.aliexpress.com/item/4000211331316.html) - No GPS
-  - version 2.1
-    - board labels "TTGO T3_V1.6 20180606"
-  - 3D printable case
-    - [TTGO LORA32 v1](https://www.thingiverse.com/thing:3385109)
-
-- [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/) - No GPS
-  - [3D Printable case](https://www.thingiverse.com/thing:3125854)
-
-**Make sure to get the frequency for your country**
-
-- US/JP/AU/NZ/CA - 915MHz
-- CN - 470MHz
-- EU - 868MHz, 433MHz
-- full list of LoRa frequencies per region is available [here](https://www.thethingsnetwork.org/docs/lorawan/frequencies-by-country.html)
-
-Getting a version that includes a screen is optional, but highly recommended.
-
-## Firmware Installation
-
-Prebuilt binaries for the supported radios are available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases). Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
-
-Be **very careful** to install the correct load for your board. In particular the popular 'T-BEAM' radio from TTGO is not called 'TTGO-Lora' (that is a different board). So don't install the 'TTGO-Lora' build on a TBEAM, it won't work correctly.
-
-Please post comments on our [group chat](https://meshtastic.discourse.group/) if you have problems or successes.
-
-### Installing from a GUI - Windows and Mac
-
-1. Download and unzip the latest Meshtastic firmware [release](https://github.com/meshtastic/Meshtastic-esp32/releases).
-2. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases) (either x86-32bit Windows or x64-64 bit Windows).
-3. Connect your radio to your USB port and open ESPHome Flasher.
-4. If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
-5. If there is an error, download the drivers [here](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), then unzip and run the Installer application.
-6. In ESPHome Flasher, refresh the serial ports and select your board.
-7. Browse to the previously downloaded firmware and select the correct firmware based on the board type, country and frequency.
-8. Select Flash ESP.
-9. Once complete, “Done! Flashing is complete!” will be shown.
-10. Debug messages sent from the Meshtastic device can be viewed with a terminal program such as [PuTTY](https://www.putty.org/) (Windows only). Within PuTTY, click “Serial”, enter the “Serial line” com port (can be found at step 4), enter “Speed” as 921600, then click “Open”.
-
-### Installing from a commandline
-
-These instructions currently require a few commmand lines, but it should be pretty straightforward.
-
-1. Install "pip". Pip is the python package manager we use to get the esptool installer app. Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/). If you are using OS-X, see these [special instructions](docs/software/install-OSX.md).
-2. Run "pip install --upgrade esptool" to get esptool installed on your machine.
-3. Connect your radio to your USB port.
-4. Confirm that your device is talking to your PC by running "esptool.py chip_id". The Heltec build also works on the TTGO LORA32 radio. You should see something like:
-
-```
-mydir$ esptool.py chip_id
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting....
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b5:36:71
-Uploading stub...
-Running stub...
-Stub running...
-Warning: ESP32 has no Chip ID. Reading MAC instead.
-MAC: 24:6f:28:b5:36:71
-Hard resetting via RTS pin...
-```
-
-5. cd into the directory where the release zip file was expanded.
-6. Install the correct firmware for your board with `device-install.sh -f firmware-_board_-_country_.bin`.
-   - Example: `./device-install.sh -f firmware-HELTEC-US-0.0.3.bin`.
-7. To update run `device-update.sh -f firmware-_board_-_country_.bin`
-   - Example: `./device-update.sh -f firmware-HELTEC-US-0.0.3.bin`.
-
-Note: If you have previously installed meshtastic, you don't need to run this full script instead just run `esptool.py --baud 921600 write_flash 0x10000 firmware-_board_-_country_-_version_.bin`. This will be faster, also all of your current preferences will be preserved.
-
-You should see something like this:
-
-```
-kevinh@kevin-server:~/development/meshtastic/meshtastic-esp32/release/latest$ ./device-install.sh firmware-TBEAM-US-0.1.8.bin
-Trying to flash firmware-TBEAM-US-0.1.8.bin, but first erasing and writing system information
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting........____
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Erasing flash (this may take a while)...
-Chip erase completed successfully in 6.1s
-Hard resetting via RTS pin...
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting.......
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Configuring flash size...
-Auto-detected Flash size: 4MB
-Flash params set to 0x0220
-Compressed 61440 bytes to 11950...
-Wrote 61440 bytes (11950 compressed) at 0x00001000 in 0.2 seconds (effective 3092.4 kbit/s)...
-Hash of data verified.
-
-Leaving...
-Hard resetting via RTS pin...
-esptool.py v2.6
-Found 2 serial ports
-Serial port /dev/ttyUSB0
-Connecting.....
-Detecting chip type... ESP32
-Chip is ESP32D0WDQ6 (revision 1)
-Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
-MAC: 24:6f:28:b2:01:6c
-Uploading stub...
-Running stub...
-Stub running...
-Changing baud rate to 921600
-Changed.
-Configuring flash size...
-Auto-detected Flash size: 4MB
-Compressed 1223568 bytes to 678412...
-Wrote 1223568 bytes (678412 compressed) at 0x00010000 in 10.7 seconds (effective 912.0 kbit/s)...
-Hash of data verified.
-
-Leaving...
-Hard resetting via RTS pin...
-```
-
-7. The board will boot and show the Meshtastic logo.
-8. Please post a comment on our chat so we know if these instructions worked for you ;-). If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
-
-# Meshtastic Android app
-
-The companion (optional) Meshtastic Android app is [here](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub-dev-readme). You can also download it on Google Play.
-
-# Python API
-
-We offer a [python API](https://github.com/meshtastic/Meshtastic-python) that makes it easy to use these devices to provide mesh networking for your custom projects.
-
-# Development
-
-We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
-
-# Credits
-
-This project is run by volunteers. Past contributors include:
-
-- @astro-arphid: Added support for 433MHz radios in europe.
-- @claesg: Various documentation fixes and 3D print enclosures
-- @girtsf: Lots of improvements
-- @spattinson: Fixed interrupt handling for the AXP192 part
-
-# IMPORTANT DISCLAIMERS AND FAQ
-
-For a listing of currently missing features and a FAQ click [here](docs/faq.md).
-
-Copyright 2019 Geeksville Industries, LLC. GPL V3 Licensed.
+![Alt](https://repobeats.axiom.co/api/embed/99a2cf5622bb4807f9e8c3b86589f1133cce58a2.svg 'Repobeats analytics image')

bin/build-all.sh

@@ -1,18 +1,16 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 set -e
 
-source bin/version.sh
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
 
-COUNTRIES="US EU433 EU865 CN JP ANZ KR"
-#COUNTRIES=US
-#COUNTRIES=CN
-
-BOARDS_ESP32="tlora-v2 tlora-v1 tlora-v2-1-1.6 tbeam heltec tbeam0.7"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine
-BOARDS_NRF52="lora-relay-v1"
+BOARDS_NRF52="rak4631 rak4631_eink t-echo pca10059_diy_eink"
+#BOARDS_NRF52=""
 
 OUTDIR=release/latest
 
@@ -21,35 +19,24 @@ ARCHIVEDIR=release/archive
 
 rm -f $OUTDIR/firmware*
 
-mkdir -p $OUTDIR/bins
-rm -r $OUTDIR/bins/*
+mkdir -p $OUTDIR/bins $ARCHIVEDIR
+rm -r $OUTDIR/bins/* || true
 mkdir -p $OUTDIR/bins/universal $OUTDIR/elfs/universal
 
 # build the named environment and copy the bins to the release directory
 function do_build() {
 	BOARD=$1
-	COUNTRY=$2
 	isNrf=$3
 	
-    echo "Building $COUNTRY for $BOARD with $PLATFORMIO_BUILD_FLAGS"
+    echo "Building for $BOARD ($isNrf) with $PLATFORMIO_BUILD_FLAGS"
     rm -f .pio/build/$BOARD/firmware.*
 
     # The shell vars the build tool expects to find
     export APP_VERSION=$VERSION
 
-    # Are we building a universal/regionless rom?
-    if [ "x$COUNTRY" != "x" ]
-    then
-        export HW_VERSION="1.0-$COUNTRY"
-        export COUNTRY
-        basename=firmware-$BOARD-$COUNTRY-$VERSION
-    else
-        export HW_VERSION="1.0"
-        unset COUNTRY
     basename=universal/firmware-$BOARD-$VERSION
-    fi
 
-    pio run --jobs 4 --environment $BOARD # -v
+    pio run --environment $BOARD # -v
     SRCELF=.pio/build/$BOARD/firmware.elf
     cp $SRCELF $OUTDIR/elfs/$basename.elf
 
@@ -69,11 +56,8 @@ function do_boards() {
 	declare boards=$1
 	declare isNrf=$2
 	for board in $boards; do
-		for country in $COUNTRIES; do 
-		    do_build $board $country "$isNrf"   
-		done
-
 		# Build universal
+        echo "about to build $board $isNrf"
 		do_build $board "" "$isNrf" 
 	done
 }
@@ -87,8 +71,15 @@ platformio lib update
 do_boards "$BOARDS_ESP32" "false"
 do_boards "$BOARDS_NRF52" "true"
 
+pio run --environment native
+cp .pio/build/native/program $OUTDIR/bins/universal/meshtasticd_linux_amd64
+
+echo "Building Filesystem for ESP32 targets"
+pio run --environment tbeam -t buildfs
+cp .pio/build/tbeam/spiffs.bin $OUTDIR/bins/universal/littlefs-$VERSION.bin
+
 # keep the bins in archive also
-cp $OUTDIR/bins/firmware* $OUTDIR/elfs/firmware* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
+cp $OUTDIR/bins/universal/littlefs* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
 
 echo Updating android bins $OUTDIR/forandroid
 rm -rf $OUTDIR/forandroid
@@ -103,12 +94,16 @@ release.  It is used by the android app for forcing software updates.  Do not ed
 Generated by bin/buildall.sh -->
 
 <resources>
-    <string name="cur_firmware_version">$VERSION</string>
+    <string name="cur_firmware_version" translatable="false">$VERSION</string>
+    <string name="short_firmware_version" translatable="false">$SHORT_VERSION</string>
 </resources>
 XML
 
 echo Generating $ARCHIVEDIR/firmware-$VERSION.zip
 rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $OUTDIR/bins/firmware-*-$VERSION.* images/system-info.bin bin/device-install.sh bin/device-update.sh
+zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $ARCHIVEDIR/littlefs-$VERSION.bin $OUTDIR/bins/universal/firmware-*-$VERSION.* $OUTDIR/bins/universal/meshtasticd* images/system-info.bin bin/device-install.* bin/device-update.*
+echo Generating $ARCHIVEDIR/elfs-$VERSION.zip
+rm -f $ARCHIVEDIR/elfs-$VERSION.zip
+zip --junk-paths $ARCHIVEDIR/elfs-$VERSION.zip $OUTDIR/elfs/universal/firmware-*-$VERSION.*
 
 echo BUILT ALL

bin/build-esp32.sh

@@ -0,0 +1,41 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Make sure our submodules are current
+git submodule update 
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio lib update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Copying ESP32 bin file"
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin
+
+echo "Building Filesystem for ESP32 targets"
+pio run --environment tbeam -t buildfs
+cp .pio/build/tbeam/spiffs.bin $OUTDIR/littlefs-$VERSION.bin
+cp images/system-info.bin $OUTDIR/system-info.bin
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+
+mkdir -p $OUTDIR/
+rm -r $OUTDIR/* || true
+
+# Make sure our submodules are current
+git submodule update 
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio lib update 
+
+pio run --environment native
+cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR
+

bin/build-nrf52.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Make sure our submodules are current
+git submodule update 
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio lib update 
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
+bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/buildinfo.py

@@ -0,0 +1,9 @@
+#!/usr/bin/env python3
+import configparser
+import sys
+from readprops import readProps
+
+
+verObj = readProps('version.properties')
+propName = sys.argv[1]
+print(f"{verObj[propName]}")

bin/check-all.sh

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+
+# Note: This is a prototype for how we could add static code analysis to the CI.
+
+set -e
+
+VERSION=`bin/buildinfo.py long`
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+if [[ $# -gt 0 ]]; then
+    # can override which environment by passing arg
+    BOARDS="$@"
+else
+    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+fi
+
+echo "BOARDS:${BOARDS}"
+
+CHECK=""
+for BOARD in $BOARDS; do
+     CHECK="${CHECK} -e ${BOARD}"
+done
+
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high

bin/device-install.bat

@@ -0,0 +1,42 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+	%PYTHON% -m esptool --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 write_flash 0x1000 system-info.bin
+    for %%f in (littlefs-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x00390000 %%f
+    )
+	%PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-install.sh

@@ -1,19 +1,24 @@
 #!/bin/sh
 
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
+set -e
+
 # Usage info
 show_help() {
 cat << EOF
-Usage: ${0##*/} [-h] [-p ESPTOOL_PORT] [-f FILENAME]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
 EOF
 }
 
 
-while getopts ":h:p:f:" opt; do
+while getopts ":hp:P:f:" opt; do
     case "${opt}" in
         h)
             show_help
@@ -21,6 +26,8 @@ while getopts ":h:p:f:" opt; do
             ;;
         p)  export ESPTOOL_PORT=${OPTARG}
 	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
         f)  FILENAME=${OPTARG}
             ;;
         *)
@@ -32,11 +39,17 @@ while getopts ":h:p:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	esptool.py --baud 921600 erase_flash
-	esptool.py --baud 921600 write_flash 0x1000 system-info.bin
-	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
+	"$PYTHON" -m esptool  erase_flash
+	"$PYTHON" -m esptool  write_flash 0x1000 system-info.bin
+	"$PYTHON" -m esptool  write_flash 0x00390000 littlefs-*.bin
+	"$PYTHON" -m esptool  write_flash 0x10000 ${FILENAME}
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/device-update.bat

@@ -0,0 +1,39 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+    echo Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used
+    %PYTHON% -m esptool --baud 115200 erase_region 0xe000 0x2000
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-update.sh

@@ -1,19 +1,22 @@
 #!/bin/sh
 
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
 # Usage info
 show_help() {
 cat << EOF
-Usage: ${0##*/} [-h] [-p ESPTOOL_PORT] -f FILENAME
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
 EOF
 }
 
 
-while getopts ":h:p:f:" opt; do
+while getopts ":hp:P:f:" opt; do
     case "${opt}" in
         h)
             show_help
@@ -21,6 +24,8 @@ while getopts ":h:p:f:" opt; do
             ;;
         p)  export ESPTOOL_PORT=${OPTARG}
 	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
         f)  FILENAME=${OPTARG}
             ;;
         *)
@@ -32,9 +37,16 @@ while getopts ":h:p:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash update ${FILENAME}."
-	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
+	echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
+	$PYTHON -m esptool --baud 115200 erase_region 0xe000 0x2000
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/dump-ram-users.sh

@@ -1,3 +1,5 @@
+#!/usr/bin/env bash
+
 arm-none-eabi-readelf -s -e .pio/build/nrf52dk/firmware.elf | head -80
 
 nm -CSr --size-sort .pio/build/nrf52dk/firmware.elf  | grep '^200'

bin/exception_decoder.py

@@ -241,7 +241,7 @@ def print_addr(name, value, resolver):
 def print_stack_full(lines, resolver):
     print("stack:")
     for line in lines:
-        print(line.offset + ":")
+        print(str(line.offset) + ":")
         for content in line.content:
             print("  " + resolver.resolve_stack_addr(content))
 

bin/gen-images.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/env bash
+
+set -e 
+
+# regen the design bins first
+cd design
+bin/generate-pngs.sh
+cd ..
+
+# assumes 50 wide, 28 high
+convert design/logo/png/Mesh_Logo_Black_Small.png -background white -alpha Background src/graphics/img/icon.xbm
+
+inkscape --batch-process -o images/compass.png -w 48 -h 48 images/location_searching-24px.svg
+convert compass.png -background white -alpha Background src/graphics/img/compass.xbm
+
+inkscape --batch-process -o images/face.png -w 13 -h 13 images/face-24px.svg
+
+inkscape --batch-process -o images/pin.png -w 13 -h 13 images/room-24px.svg
+convert pin.png -background white -alpha Background src/graphics/img/pin.xbm

bin/genpartitions.py

@@ -1,4 +1,4 @@
-#!/usr/bin/python2
+#!/usr/bin/env python2
 
 # This is a layout for 4MB of flash
 # Name,   Type, SubType, Offset,  Size, Flags

bin/install-bootloader.sh

@@ -1,35 +0,0 @@
-# You probably don't want to use this script, it programs a custom bootloader build onto a nrf52 board
-
-set -e 
-
-# dependencies
-# apt install srecord
-
-BOOTDIR=/home/kevinh/development/meshtastic/Adafruit_nRF52_Bootloader
-BOARD=othernet_ppr1
-BOOTVER=0.3.2
-BOOTNUM=128
-BOOTSHA=gc01b9ea
-SDCODE=s113
-SDVER=7.2.0
-PROJ=ppr1
-
-# FIXME for nRF52840 use 0xff000, for nRF52833 use 0x7f000
-BOOTSET=0x7f000
-
-nrfjprog --eraseall -f nrf52
-
-# this generates an intel hex file that can be programmed into a NRF52 to tell the adafruit bootloader that the current app image is valid
-# Bootloader settings are at BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
-# first 4 bytes should be 0x01 to indicate valid app image
-# second 4 bytes should be 0x00 to indicate no CRC required for image
-echo "01 00 00 00 00 00 00 00" | xxd -r -p - >/tmp/bootconf.bin
-srec_cat /tmp/bootconf.bin -binary -offset $BOOTSET -output /tmp/bootconf.hex -intel   
-
-echo Generating merged hex file from .pio/build/$PROJ/firmware.hex
-mergehex -o ${BOARD}_full.hex -m $BOOTDIR/_build/build-$BOARD/${BOARD}_bootloader-$BOOTVER-$BOOTNUM-$BOOTSHA-dirty_${SDCODE}_$SDVER.hex .pio/build/$PROJ/firmware.hex /tmp/bootconf.hex
-
-echo Telling bootloader app region is valid and telling CPU to run
-nrfjprog --program ${BOARD}_full.hex -f nrf52 --reset
-
-# nrfjprog --readuicr /tmp/uicr.hex; objdump -s /tmp/uicr.hex | less

bin/install-eink.sh

@@ -1,22 +0,0 @@
-# You probably don't want to use this script, it programs a custom bootloader build onto a nrf52 board
-
-set -e 
-
-BOOTDIR=/home/kevinh/development/meshtastic/Adafruit_nRF52_Bootloader
-
-nrfjprog --eraseall -f nrf52
-
-# this generates an intel hex file that can be programmed into a NRF52 to tell the adafruit bootloader that the current app image is valid
-# Bootloader settings are at BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
-# first 4 bytes should be 0x01 to indicate valid app image
-# second 4 bytes should be 0x00 to indicate no CRC required for image
-echo "01 00 00 00 00 00 00 00" | xxd -r -p - >/tmp/bootconf.bin
-srec_cat /tmp/bootconf.bin -binary -offset 0xff000 -output /tmp/bootconf.hex -intel   
-
-echo Generating merged hex file 
-mergehex -m $BOOTDIR/_build/build-ttgo_eink/ttgo_eink_bootloader-0.3.2-125-gf38f8f4-dirty_s140_6.1.1.hex .pio/build/eink/firmware.hex /tmp/bootconf.hex -o ttgo_eink_full.hex
-
-echo Telling bootloader app region is valid and telling CPU to run
-nrfjprog --program ttgo_eink_full.hex -f nrf52 --reset
-
-# nrfjprog --readuicr /tmp/uicr.hex; objdump -s /tmp/uicr.hex | less

bin/lora32-openocd.cfg

@@ -1,61 +0,0 @@
-# Example OpenOCD configuration file for ESP-WROOM-32 module.
-# By default, the following configuration is used:
-# - dual core debugging
-# - support for listing FreeRTOS tasks is enabled
-# - OpenOCD is configured to set SPI flash voltage at 3.3V
-#   by keeping MTDI bootstrapping pin low
-#
-# Use variables listed below to customize this.
-# Variables can be modified in this file or set on the command line.
-#
-# For example, OpenOCD can be started for single core ESP32 debugging on
-# ESP-WROVER-KIT with ESP-WROOM-32 module as follows:
-#
-#   openocd -f interface/ftdi/esp32_devkitj_v1.cfg -c 'set ESP32_ONLYCPU 1' -f board/esp-wroom-32.cfg
-#
-# If a different JTAG interface is used, change the first -f option.
-#
-# If OpenOCD is built from source, pass an additional -s option to specify
-# the location of 'tcl' directory:
-#
-#    src/openocd -s tcl <rest of the command line>
-#
-# Note:
-#   For ESP32-WROVER module use 'esp32-wrover.cfg' configuration file
-#   ESP-WROOM-32 and ESP32-WROVER have different flash voltage setting
-
-
-# The ESP32 only supports JTAG.
-transport select jtag
-
-# The speed of the JTAG interface, in KHz. If you get DSR/DIR errors (and they
-# do not relate to OpenOCD trying to read from a memory range without physical
-# memory being present there), you can try lowering this.
-#
-# On DevKit-J, this can go as high as 20MHz if CPU frequency is 80MHz, or 26MHz
-# if CPU frequency is 160MHz or 240MHz.
-adapter_khz 20000
-
-# If single core debugging is required, uncomment the following line
-# set ESP32_ONLYCPU 1
-
-# To disable RTOS support, uncomment the following line
-# set ESP32_RTOS none
-
-# Tell OpenOCD which SPI flash voltage is used by the board (3.3 or 1.8)
-# The TDI pin of ESP32 is also a bootstrap pin that selects the voltage the SPI flash
-# chip runs at. When a hard reset happens (e.g. because someone switches the board off
-# and on) the ESP32 will use the current TDI value as the bootstrap value because the
-# JTAG adapter overrides the pull-up or pull-down resistor that is supposed to do the
-# bootstrapping. These lines basically set the idle value of the TDI line to a
-# specified value, therefore reducing the chance of a bad bootup due to a bad flash
-# voltage greatly.
-# This option defaults to 3.3, if not set. To override the default, uncomment
-# the following line:
-# set ESP32_FLASH_VOLTAGE 1.8
-
-# Set semihosting I/O base dir
-# set ESP_SEMIHOST_BASEDIR ""
-
-# Source the ESP32 configuration file
-source [find target/esp32.cfg]

bin/mklittlefs.py

@@ -0,0 +1,51 @@
+#!/usr/bin/env python3
+import getopt
+import sys
+import os
+from littlefs import LittleFS
+from pathlib import Path
+
+print( "Building LittleFS image..." )
+
+argList = sys.argv[1:]
+arxx = { argList[i]: argList[i+1] for i in range(0, len(argList)-1, 2) }
+
+dataPath = arxx["-c"]
+blockSize = int(arxx["-b"])
+blockCount = int(arxx["-s"]) / blockSize
+
+cwd = os.getcwd()
+
+os.chdir(dataPath)
+
+fileList = []
+dirList = []
+
+for (dirpath, dirnames, filenames) in os.walk('.'):
+    for f in filenames:
+        if (f[:1] != '.'):
+            fileList.append( os.path.join(dirpath, f) )
+    for d in dirnames:
+        if (d[:1] != '.'):
+            dirList.append( os.path.join(dirpath, d) )
+
+fs = LittleFS(block_size=blockSize, block_count=blockCount) # create a 448kB partition
+
+for curDir in dirList:
+    print( "Creating dir " + curDir )
+    fs.mkdir( curDir )
+        
+for curFile in fileList:
+    print( "Adding file " + curFile )
+    with open( curFile, 'rb' ) as f:
+        data = f.read()
+
+    with fs.open( curFile, 'wb') as fh:
+        fh.write( data )
+
+outName = argList[-1]
+
+os.chdir(cwd)
+
+with open(outName, 'wb') as fh:
+    fh.write(fs.context.buffer)

bin/native-gdbserver.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+set -e
+pio run --environment native
+.pio/build/native/program "$@"

bin/nrf52-console.sh

@@ -1,4 +0,0 @@
-
-
-# JLinkRTTViewer
-JLinkRTTClient

bin/nrf52832-gdbserver.sh

@@ -1,3 +0,0 @@
-
-
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52832_XXAA

bin/nrf52833-gdbserver.sh

@@ -1,3 +0,0 @@
-
-
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52833_XXAA

bin/nrf52840-gdbserver.sh

@@ -1,3 +0,0 @@
-
-
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA

bin/platformio-custom.py

@@ -0,0 +1,27 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+from readprops import readProps
+
+Import("env")
+env.Replace( MKSPIFFSTOOL=env.get("PROJECT_DIR") + '/bin/mklittlefs.py' )
+try:
+    import littlefs
+except ImportError:
+    env.Execute("$PYTHONEXE -m pip install littlefs-python")
+
+Import("projenv")
+
+prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
+verObj = readProps(prefsLoc)
+print("Using meshtastic platformio-custom.py, firmare version " + verObj['long'])
+# print("path is" + ','.join(sys.path))
+
+# General options that are passed to the C and C++ compilers
+projenv.Append(CCFLAGS=[
+    "-DAPP_VERSION=" + verObj['long'],
+    "-DAPP_VERSION_SHORT=" + verObj['short']    
+])

bin/program-release-heltec.sh

@@ -1,6 +0,0 @@
-
-set -e
-
-source bin/version.sh
-
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-heltec-US-$VERSION.bin

bin/program-release-tbeam.sh

@@ -1,6 +0,0 @@
-
-set -e
-
-source bin/version.sh
-
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-tbeam-US-$VERSION.bin

bin/promote-release.sh

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+
+set -e 
+
+echo "This script is only for developers who are publishing new builds on github.  Most users don't need it"
+
+VERSION=`bin/buildinfo.py long`
+
+# Must have a V prefix to trigger github
+git tag "v${VERSION}"
+
+# Commented out per https://github.com/meshtastic/Meshtastic-device/issues/947
+#git push root "v${VERSION}" # push the tag
+
+git push origin "v${VERSION}" # push the tag
+
+echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/qspi-flash-test.sh

@@ -1,6 +0,0 @@
-# You probably don't need this - it is a basic test of the serial flash on the TTGO eink board
-
-nrfjprog -qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
-nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --memwr 0x12000000 --val 0xdeadbeef --verify
-nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --readqspi spi.hex
-objdump -s spi.hex | less

bin/read-system-info.sh

@@ -1 +1,3 @@
-esptool.py --baud 921600 read_flash 0x1000 0xf000 system-info.img
+#!/usr/bin/env bash
+
+esptool.py --baud 115200 read_flash 0x1000 0xf000 system-info.img

bin/readprops.py

@@ -0,0 +1,37 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+
+
+def readProps(prefsLoc):
+    """Read the version of our project as a string"""
+
+    config = configparser.RawConfigParser()
+    config.read(prefsLoc)
+    version = dict(config.items('VERSION'))
+    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long = "unset")
+
+    # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
+    try:
+        sha = subprocess.check_output(
+            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
+        isDirty = subprocess.check_output(
+            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        suffix = sha
+        if isDirty:
+            # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+            suffix = sha + "-d"
+        verObj['long'] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix)
+    except:
+        # print("Unexpected error:", sys.exc_info()[0])
+        # traceback.print_exc()
+        verObj['long'] = verObj['short']
+
+    # print("firmare version " + verStr)
+    return verObj
+# print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -0,0 +1 @@
+cd protobufs && ..\nanopb-0.4.6\generator-bin\protoc.exe --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs *.proto

bin/regen-protos.sh

@@ -1,6 +1,15 @@
-#!/bin/bash
+#!/usr/bin/env bash
+
+set -e
+
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.6 to be located in the"
+echo "meshtastic-device root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.6"
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.1"
 # the nanopb tool seems to require that the .options file be in the current directory!
-cd proto
-../../nanopb-0.4.1-linux-x86/generator-bin/protoc --nanopb_out=-v:../src/mesh -I=../proto mesh.proto
+cd protobufs
+../nanopb-0.4.6/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../protobufs *.proto
+
+#echo "Regenerating protobuf documentation - if you see an error message"
+#echo "you can ignore it unless doing a new protobuf release to github."
+#bin/regen-docs.sh

bin/run-0-monitor.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-1-monitor.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB1 -t upload -t monitor

bin/run-both-monitor.sh

@@ -1,7 +0,0 @@
-set -e 
-
-echo uploading to usb1
-pio run --upload-port /dev/ttyUSB1 -t upload
-
-echo uploading to usb0
-pio run --upload-port /dev/ttyUSB0 -t upload -t monitor

bin/run-openocd.sh

@@ -1,5 +0,0 @@
-
-
-# /home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -c gdb_port pipe; tcl_port disabled; telnet_port disabled -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f board/esp-wroom-32.cfg
-/home/kevinh/.platformio/packages/tool-openocd-esp32/bin/openocd -s /home/kevinh/.platformio/packages/tool-openocd-esp32 -s /home/kevinh/.platformio/packages/tool-openocd-esp32/share/openocd/scripts -f interface/jlink.cfg -f ./lora32-openocd.cfg
-

bin/start-terminal0.sh

@@ -1 +0,0 @@
-pio device monitor -b 921600

bin/start-terminal1.sh

@@ -1 +0,0 @@
-pio device monitor -p /dev/ttyUSB1 -b 921600

bin/test-simulator.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+set -e
+
+echo "Starting simulator"
+.pio/build/native/program &
+sleep 20 # 5 seconds was not enough
+
+echo "Simulator started, launching python test..."
+python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+

bin/uf2-convert.bat

@@ -0,0 +1,2 @@
+@echo off
+if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)

bin/upload-to-bootloader.sh

@@ -1,4 +0,0 @@
-
-echo "Converting to uf2 for NRF52 Adafruit bootloader"
-bin/uf2conv.py .pio/build/lora-relay-v2/firmware.hex -f 0xADA52840
-# cp flash.uf2 /media/kevinh/FTH*BOOT/

bin/upload-usb1.sh

@@ -1 +0,0 @@
-pio run --upload-port /dev/ttyUSB1 -t upload

bin/version.sh

@@ -1,3 +0,0 @@
-
-
-export VERSION=1.1.8

bin/view-map.sh

@@ -1,2 +1,4 @@
+#!/usr/bin/env bash
+
 echo using amap tool to display memory map
 amap .pio/build/output.map

boards/eink0.1.json

@@ -15,7 +15,7 @@
     ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
-    "variant": "eink",
+    "variant": "eink0.1",
     "variants_dir": "variants",
     "bsp": {
       "name": "adafruit"

boards/lora_isp4520.json

@@ -7,15 +7,8 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DNRF52832_XXAA -DNRF52",
     "f_cpu": "64000000L",
-    "hwids": [
-      [
-        "0x10c4",
-        "0xea60"
-      ]
-    ],
-    "usb_product": "RAK815",
     "mcu": "nrf52832",
-    "variant": "rak815",
+    "variant": "lora_isp4520",
     "bsp": {
       "name": "adafruit"
     },
@@ -36,7 +29,7 @@
   "frameworks": [
     "arduino"
   ],
-  "name": "RAK RAK815",
+  "name": "lora ISP4520",
   "upload": {
     "maximum_ram_size": 65536,
     "maximum_size": 524288,
@@ -50,6 +43,6 @@
       "stlink"
     ]
   },
-  "url": "https://store.rakwireless.com/products/rak815-hybrid-location-tracker",
-  "vendor": "RAK"
+  "url": "",
+  "vendor": "PsiSoft"
 }

boards/nordic_pca10059.json

@@ -0,0 +1,72 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "nrf52840_s140_v6.ld"
+        },
+        "core": "nRF5",
+        "cpu": "cortex-m4",
+        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+        "f_cpu": "64000000L",
+        "hwids": [
+            [
+                "0x239A",
+                "0x8029"
+            ],
+            [
+                "0x239A",
+                "0x0029"
+            ],
+            [
+                "0x239A",
+                "0x002A"
+            ],
+            [
+                "0x239A",
+                "0x802A"
+            ]
+        ],
+        "usb_product": "PCA10059",
+        "mcu": "nrf52840",
+        "variant": "nRF52840 Dongle",
+        "bsp": {
+            "name": "adafruit"
+        },
+        "softdevice": {
+            "sd_flags": "-DS140",
+            "sd_name": "s140",
+            "sd_version": "6.1.1",
+            "sd_fwid": "0x00B6"
+        },
+        "bootloader": {
+            "settings_addr": "0xFF000"
+        }
+    },
+    "connectivity": [
+        "bluetooth"
+    ],
+    "debug": {
+        "jlink_device": "nRF52840_xxAA",
+        "svd_path": "nrf52840.svd"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "nRF52840 Dongle",
+    "upload": {
+        "maximum_ram_size": 248832,
+        "maximum_size": 815104,
+        "speed": 115200,
+        "protocol": "nrfutil",
+        "protocols": [
+            "jlink",
+            "nrfjprog",
+            "nrfutil",
+            "stlink"
+        ],
+        "use_1200bps_touch": true,
+        "require_upload_port": true,
+        "wait_for_upload_port": true
+    },
+    "url": "https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle",
+    "vendor": "Nordic Semiconductor"
+}

boards/nrf52840_dk_modified.json

@@ -16,9 +16,9 @@
       "name": "adafruit"
     },
     "softdevice": {
-      "sd_flags": "-DS113",
-      "sd_name": "s113",
-      "sd_version": "7.2.0",
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
       "sd_fwid": "0x00B6"
     },
     "bootloader": {

boards/t-echo.json

@@ -0,0 +1,64 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ]
+    ],
+    "usb_product": "TTGO_eink",
+    "mcu": "nrf52840",
+    "variant": "t-echo",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "TTGO eink (Adafruit BSP)",
+    "upload": {
+      "maximum_ram_size": 248832,
+      "maximum_size": 815104,
+      "speed": 115200,
+      "protocol": "nrfutil",
+      "protocols": [
+          "jlink",
+          "nrfjprog",
+          "nrfutil",
+          "stlink"
+      ],
+      "use_1200bps_touch": true,
+      "require_upload_port": true,
+      "wait_for_upload_port": true
+  },
+  "url": "FIXME",
+  "vendor": "TTGO"
+}

boards/wiscore_rak11200.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": "-DARDUINO_ESP32_DEV",
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "WisCore_RAK11200_Board"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "ethernet",
+    "can"
+  ],
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "WisCore RAK11200 Board",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "protocols": [
+      "esptool",
+      "espota",
+      "ftdi"
+    ],
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.rakwireless.com",
+  "vendor": "RAKwireless"
+}

boards/wiscore_rak4600.json

@@ -0,0 +1,71 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "Feather nRF52832 Express",
+    "mcu": "nrf52832",
+    "variant": "WisCore_RAK4600_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    },
+    "zephyr": {
+      "variant": "nrf52_adafruit_feather"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd"
+  },
+  "frameworks": [
+    "arduino",
+    "zephyr"
+  ],
+  "name": "Adafruit Bluefruit nRF52832 Feather",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "https://www.adafruit.com/product/3406",
+  "vendor": "Adafruit"
+}

boards/wiscore_rak4631.json

@@ -0,0 +1,72 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "nrf52840_s140_v6.ld"
+        },
+        "core": "nRF5",
+        "cpu": "cortex-m4",
+        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+        "f_cpu": "64000000L",
+        "hwids": [
+            [
+                "0x239A",
+                "0x8029"
+            ],
+            [
+                "0x239A",
+                "0x0029"
+            ],
+            [
+                "0x239A",
+                "0x002A"
+            ],
+            [
+                "0x239A",
+                "0x802A"
+            ]
+        ],
+        "usb_product": "WisCore RAK4631 Board",
+        "mcu": "nrf52840",
+        "variant": "WisCore_RAK4631_Board",
+        "bsp": {
+            "name": "adafruit"
+        },
+        "softdevice": {
+            "sd_flags": "-DS140",
+            "sd_name": "s140",
+            "sd_version": "6.1.1",
+            "sd_fwid": "0x00B6"
+        },
+        "bootloader": {
+            "settings_addr": "0xFF000"
+        }
+    },
+    "connectivity": [
+        "bluetooth"
+    ],
+    "debug": {
+        "jlink_device": "nRF52840_xxAA",
+        "svd_path": "nrf52840.svd"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "WisCore RAK4631 Board",
+    "upload": {
+        "maximum_ram_size": 248832,
+        "maximum_size": 815104,
+        "speed": 115200,
+        "protocol": "nrfutil",
+        "protocols": [
+            "jlink",
+            "nrfjprog",
+            "nrfutil",
+            "stlink"
+        ],
+        "use_1200bps_touch": true,
+        "require_upload_port": true,
+        "wait_for_upload_port": true
+    },
+    "url": "https://www.rakwireless.com",
+    "vendor": "RAKwireless"
+}

data/style.css

@@ -1,277 +0,0 @@
-/* latin-ext */
-@font-face {
-  font-family: 'Lato';
-  font-style: normal;
-  font-weight: 400;
-  src: local('Lato Regular'), local('Lato-Regular'), url(./Google.woff2) format('woff2');
-  unicode-range: U+0100-024F, U+0259, U+1E00-1EFF, U+2020, U+20A0-20AB, U+20AD-20CF, U+2113, U+2C60-2C7F, U+A720-A7FF;
-}
-
-
-*, *:before, *:after {
-  box-sizing: border-box;
-}
-
-body {
-  background: #C5DDEB;
-  font: 14px/20px "Lato", Arial, sans-serif;
-  padding: 40px 0;
-  color: white;
-}
-
-
-  
-.grid {
-  display: grid;
-  grid-template-columns:
-	1fr 4fr;
-  grid-template-areas:
-	"header header"
-	"sidebar content";
-  margin: 0 auto;
-  width: 750px;
-  background: #444753;
-  border-radius: 5px;
-}
-
-.top {grid-area: header;}
-.side {grid-area: sidebar;}
-.main {grid-area: content;}
-
-.top {
-  border-bottom: 2px solid white;
-}
-.top-text {
-  font-weight: bold;
-  font-size: 24px;
-  text-align: center;
-  padding: 20px;
-}
-
-.side {
-  width: 260px;
-  float: left;
-}
-.side .side-header {
-  padding: 20px;
-  border-bottom: 2px solid white;
-}
-
-.side .side-header .side-text {
-  padding-left: 10px;
-  margin-top: 6px;
-  font-size: 16px;
-  text-align: left;
-  font-weight: bold;
-  
-}
-
-.channel-list ul {
-  padding: 20px;
-  height: 570px;
-  list-style-type: none;
-}
-.channel-list ul li {
-  padding-bottom: 20px;
-}
-
-.channel-list .channel-name {
-  font-size: 20px;
-  margin-top: 8px;
-  padding-left: 8px;
-}
-
-.channel-list .message-count {
-  padding-left: 16px;
-  color: #92959E;
-}
-
-.icon {
-  display: inline-block;
-  width: 1em;
-  height: 1em;
-  stroke-width: 0;
-  stroke: currentColor;
-  fill: currentColor;
-}
-
-.icon-map-marker {
-  width: 0.5714285714285714em;
-}
-
-.icon-circle {
-  width: 0.8571428571428571em;
-}
-
-.content {
-  display: flex;
-  flex-direction: column;
-  flex-wrap: nowrap;
-/* width: 490px; */
-  float: left;
-  background: #F2F5F8;
-/*  border-top-right-radius: 5px;
-  border-bottom-right-radius: 5px; */
-  color: #434651;
-}
-.content .content-header {
-  flex-grow: 0;
-  padding: 20px;
-  border-bottom: 2px solid white;
-}
-
-.content .content-header .content-from {
-  padding-left: 10px;
-  margin-top: 6px;
-  font-size: 20px;
-  text-align: center;
-  font-size: 16px;
-}
-.content .content-header .content-from .content-from-highlight {
-  font-weight: bold;
-}
-.content .content-header .content-num-messages {
-  color: #92959E;
-}
-
-.content .content-history {
-  flex-grow: 1;
-  padding: 20px 20px 20px;
-  border-bottom: 2px solid white;
-  overflow-y: scroll;
-  height: 375px;
-}
-.content .content-history ul {
-  list-style-type: none;
-  padding-inline-start: 10px;
-}
-.content .content-history .message-data {
-  margin-bottom: 10px;
-}
-.content .content-history .message-data-time {
-  color: #a8aab1;
-  padding-left: 6px;
-}
-.content .content-history .message {
-  color: white;
-  padding: 8px 10px;
-  line-height: 20px;
-  font-size: 14px;
-  border-radius: 7px;
-  margin-bottom: 30px;
-  width: 90%;
-  position: relative;
-}
-.content .content-history .message:after {
-  bottom: 100%;
-  left: 7%;
-  border: solid transparent;
-  content: " ";
-  height: 0;
-  width: 0;
-  position: absolute;
-  pointer-events: none;
-  border-bottom-color: #86BB71;
-  border-width: 10px;
-  margin-left: -10px;
-}
-.content .content-history .my-message {
-  background: #86BB71;
-}
-.content .content-history .other-message {
-  background: #94C2ED;
-}
-.content .content-history .other-message:after {
-  border-bottom-color: #94C2ED;
-  left: 93%;
-}
-.content .content-message {
-  flex-grow: 0;
-  padding: 10px;
-}
-.content .content-message textarea {
-  width: 100%;
-  border: none;
-  padding: 10px 10px;
-  font: 14px/22px "Lato", Arial, sans-serif;
-  margin-bottom: 10px;
-  border-radius: 5px;
-  resize: none;
-}
-
-.content .content-message button {
-  float: right;
-  color: #94C2ED;
-  font-size: 16px;
-  text-transform: uppercase;
-  border: none;
-  cursor: pointer;
-  font-weight: bold;
-  background: #F2F5F8;
-}
-.content .content-message button:hover {
-  color: #75b1e8;
-}
-/* Tooltip container */
-.tooltip {
-  color: #86BB71;
-  position: relative;
-  display: inline-block;
-  border-bottom: 1px dotted black; /* If you want dots under the hoverable text */
-}
-/* Tooltip text */
-.tooltip .tooltiptext {
-  visibility: hidden;
-  width: 120px;
-  background-color: #444753;
-  color: #fff;
-  text-align: center;
-  padding: 5px 0;
-  border-radius: 6px;
-   /* Position the tooltip text - see examples below! */
-  position: absolute;
-  z-index: 1;
-}
-
-/* Show the tooltip text when you mouse over the tooltip container */
-.tooltip:hover .tooltiptext {
-  visibility: visible;
-}
-
-.online, .offline, .me {
-  margin-right: 3px;
-  font-size: 10px;
-}
-
-.online {
-  color: #86BB71;
-}
-
-.offline {
-  color: #E38968;
-}
-
-.me {
-  color: #94C2ED;
-}
-
-.align-left {
-  text-align: left;
-}
-
-.align-right {
-  text-align: right;
-}
-
-.float-right {
-  float: right;
-}
-
-.clearfix:after {
-  visibility: hidden;
-  display: block;
-  font-size: 0;
-  content: " ";
-  clear: both;
-  height: 0;
-}

docs/.well-known/assetlinks.json

@@ -1,9 +0,0 @@
-[{
-  "relation": ["delegate_permission/common.handle_all_urls"],
-  "target": {
-    "namespace": "android_app",
-    "package_name": "com.geeksville.mesh",
-    "sha256_cert_fingerprints":
-    ["D0:05:E7:8B:D2:1B:FA:94:56:1D:6B:90:EB:53:07:1A:74:4F:D9:C2:6F:13:87:6A:D9:17:4F:C2:59:48:02:9D", "42:17:52:DC:57:40:38:B5:6B:86:61:1C:2F:47:DB:2B:0F:A2:EA:59:E1:18:9C:AA:90:8D:37:D6:CD:40:0E:BB", "A9:3B:45:65:68:C1:75:DB:08:00:A0:9F:06:77:7F:89:2D:81:24:32:AD:B8:A3:DF:73:BC:3E:7F:06:C8:0C:6D"]
-  }
-}]

docs/CNAME

@@ -1 +0,0 @@
-www.meshtastic.org

docs/README.md

@@ -1,92 +0,0 @@
-# What is Meshtastic?
-
-Meshtastic™ is a project that lets you use
-inexpensive (\$30 ish) GPS radios as an extensible, long battery life, secure, mesh GPS communicator. These radios are great for hiking, skiing, paragliding - essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other members and any text messages sent to your group chat.
-
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios will optionally work with your phone, but no phone is required.
-
-Note: Questions after reading this? See our new [forum](https://meshtastic.discourse.group/).
-
-### Uses
-
-- Outdoor sports where cellular coverage is limited. (Hiking, Skiing, Boating, Paragliding, Gliders etc..)
-- Applications where closed source GPS communicators just won't cut it (it is easy to add features for glider pilots etc...)
-- Secure long-range communication within groups without depending on cellular providers
-- Finding your lost kids ;-)
-- Through our [python API](https://pypi.org/project/meshtastic/) use these inexpensive radios to easily add mesh networking to your own projects.
-
-[![Youtube video demo](desk-video-screenshot.png)](https://www.youtube.com/watch?v=WlNbMbVZlHI "Meshtastic early demo")
-
-### Features
-
-Not all of these features are fully implemented yet - see **important** disclaimers below. But they should be in by the time we decide to call this project beta (three months?)
-
-- Very long battery life (should be about eight days with the beta software)
-- Built in GPS and [LoRa](https://en.wikipedia.org/wiki/LoRa) radio, but we manage the radio automatically for you
-- Long range - a few miles per node but each node will forward packets as needed
-- Secure - channels are encrypted by AES256 (But see important disclaimers below wrt this feature)
-- Shows direction and distance to all members of your channel
-- Directed or broadcast text messages for channel members
-- Open and extensible codebase supporting multiple hardware vendors - no lock in to one vendor
-- Communication API for bluetooth devices (such as our Android app) to use the mesh. An iOS application is in the works. And [Meshtastic-python](https://pypi.org/project/meshtastic/) provides access from desktop computers.
-- Very easy sharing of private secured channels. Just share a special link or QR code with friends and they can join your encrypted mesh
-
-This project is currently in beta testing but it is fairly stable and feature complete - if you have questions please [join our discussion forum](https://meshtastic.discourse.group/).
-
-This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the [forum](https://meshtastic.discourse.group/).
-
-### Beginner's Guide
-
-For an detailed walk-through aimed at beginners, we recommend [meshtastic.letstalkthis.com](https://meshtastic.letstalkthis.com/).
-
-# Updates
-
-Note: Updates are happening almost daily, only major updates are listed below. For more details see our forum.
-
-- 09/14/2020 - 1.0.0 Now with over 1700 android users, over 2000 nodes and translated into 15 languages. This project will always be a "beta" experiment, but now quite usable. We are currently selecting 1.1 features in our discussion forum.
-- 06/24/2020 - 0.7.x Now with over 1000 android users, over 600 people using the radios and translated into 22 languages. Fairly stable and we are working through bugs to get to 1.0.
-- 06/04/2020 - 0.6.7 Beta releases of both the application and the device code are released. Features are fairly solid now with a sizable number of users.
-- 04/28/2020 - 0.6.0 [Python API](https://pypi.org/project/meshtastic/) released. Makes it easy to use meshtastic devices as "zero config / just works" mesh transport adapters for other projects.
-- 04/20/2020 - 0.4.3 Pretty solid now both for the android app and the device code. Many people have donated translations and code. Probably going to call it a beta soon.
-- 03/03/2020 - 0.0.9 of the Android app and device code is released. Still an alpha but fairly functional.
-- 02/25/2020 - 0.0.4 of the Android app is released. This is a very early alpha, see below to join the alpha-testers group.
-- 02/23/2020 - 0.0.4 release. Still very bleeding edge but much closer to the final power management, a charged T-BEAM should run for many days with this load. If you'd like to try it, we'd love your feedback. Click [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md) for instructions.
-- 02/20/2020 - Our first alpha release (0.0.3) of the radio software is ready brave early people.
-
-## Meshtastic Android app
-
-Our Android application is available here:
-
-[![Download at https://play.google.com/store/apps/details?id=com.geeksville.mesh](https://play.google.com/intl/en_us/badges/static/images/badges/en_badge_web_generic.png)](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub-homepage)
-
-The link above will return older more stable releases. We would prefer if you join our alpha-test group, because the application is rapidly improving. Three steps to opt-in to the alpha- test:
-
-1. Join [this Google group](https://groups.google.com/forum/#!forum/meshtastic-alpha-testers) with the account you use in Google Play.
-2. Go to this [URL](https://play.google.com/apps/testing/com.geeksville.mesh) to opt-in to the alpha test.
-3. If you encounter any problems or have questions, post in our [forum](https://meshtastic.discourse.group/) and we'll help.
-
-If you'd like to help with development, the source code is [on github](https://github.com/meshtastic/Meshtastic-Android).
-
-The app is also distributed for Amazon Fire devices via the Amazon appstore: [![Amazon appstore link](https://raw.githubusercontent.com/meshtastic/Meshtastic-device/master/images/amazon-fire-button.png)](https://www.amazon.com/Geeksville-Industries-Meshtastic/dp/B08CY9394Q)
-
-## Supported hardware
-
-We currently support two brands of radios. The [TTGO T-Beam](https://www.aliexpress.com/item/4001178678568.html) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/). Most people should buy the T-Beam and a 18650 battery (total cost less than \$35). Also, the version of the T-Beam we link to is shipped with Meshtastic **preinstalled** by TTGO, so you don't have to install it yourself.
-
-Make sure to buy the frequency range which is legal for your country. For the USA, you should buy the 915MHz version. Getting a version that include a screen is optional, but highly recommended.
-
-Instructions for installing prebuilt firmware can be found [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md).
-
-For a nice looking cases:
-
-- 3D printable cases
-  1. TTGO T-Beam V0 see this [design](https://www.thingiverse.com/thing:3773717) by [bsiege](https://www.thingiverse.com/bsiege).
-  2. TTGO T_Beam V1 (SMA) see this [design](https://www.thingiverse.com/thing:3830711) by [rwanrooy](https://www.thingiverse.com/rwanrooy) or this [remix](https://www.thingiverse.com/thing:3949330) by [8ung](https://www.thingiverse.com/8ung)
-  3. TTGO T_Beam V1 (IPEX) see this [design](https://www.thingiverse.com/thing:4587297) by [drewsed](https://www.thingiverse.com/drewsed)
-  4. Heltec Lora32 see this [design](https://www.thingiverse.com/thing:3125854) by [ornotermes](https://www.thingiverse.com/ornotermes).
-- Laser-cut cases
-  1. TTGO T_Beam V1 (SMA) see this [design](https://www.thingiverse.com/thing:4552771) by [jefish](https://www.thingiverse.com/jefish)
-
-# IMPORTANT DISCLAIMERS AND FAQ
-
-For a listing of currently missing features and a FAQ click [here](faq.md).

docs/SupportedHardware.md

@@ -1,8 +0,0 @@
-| Vendor  | Product line  | Version  | Board labels  | Notes  | URL |
-|---|---|---|---|---|---|
-| TTGO  | T-Beam  | 0.7  | T22_V07 20180711  | LoRa 433/470MHz *OR* LoRa 868/915MHz , <br/>GPS ublox NEO-6M , <br/>battery holder for Li-Ion 18650  |  [buy](https://www.aliexpress.com/item/4000574335430.html)  |
-| TTGO  | T-Beam  | 1.0  |   |   |  [buy](https://www.aliexpress.com/item/4001178678568.html)  |
-| TTGO  | T-Beam  | 1.1  | T22_V11 20191212 | LoRa 433/470MHz *OR* LoRa 868/915MHz *OR* LoRa 923MHz , <br/>GPS ublox NEO-M8N , <br/>battery holder for Li-Ion 18650  | [buy](https://www.aliexpress.com/item/4001178678568.html) |
-| TTGO  | Lora32  | 2.0  | *missing*  | LoRa 433/470MHz *OR* LoRa 868/915MHz , <br/>OLED SSD1306 , <br/>SD card holder | [buy](https://www.aliexpress.com/item/4000211331316.html) |
-| TTGO  | Lora32  | 2.1  | T3_V1.6 20180606  | LoRa 32 (V2) , <br/>SD card holder | [buy](https://www.aliexpress.com/item/4000119208093.html) |
-| Heltec | Lora 32 | V2  | V2 | LoRa 433/470MHz *OR* LoRa 868/915MHz | [buy](https://heltec.org/project/wifi-lora-32/) |

docs/_config.yml

@@ -1,8 +0,0 @@
-theme: jekyll-theme-cayman
-
-title: Meshtastic
-description: An opensource hiking, pilot, skiing, secure GPS mesh communicator
-google_analytics: G-DRZ5H5EXHV
-
-include: [".well-known"]
-

docs/editing-this-site.md

@@ -1,10 +0,0 @@
-If you'd like to edit this website and test it locally:
-
-Not yet implemented:
-Per https://help.github.com/en/github/working-with-github-pages/testing-your-github-pages-site-locally-with-jekyll
-
-* follow instructions here: https://jekyllrb.com/docs/installation/ubuntu/
-* run "run-locally.sh"
-* view webpages at localhost:4000
-
-The template seems to come from here: https://github.com/pages-themes/cayman

docs/faq.md

@@ -1,34 +0,0 @@
-# Disclaimers
-
-This project is still pretty young but moving at a pretty good pace. Not all features are fully implemented in the current alpha builds.
-Most of these problems should be solved by the beta release (within three months):
-
-- We don't make these devices and they haven't been tested by UL or the FCC. If you use them you are experimenting and we can't promise they won't burn your house down ;-)
-- The encryption implementation is good but see this list of [caveats](software/crypto.md#summary-of-strengthsweaknesses-of-our-current-implementation) to determine risks you might face.
-- A number of (straightforward) software work items have to be completed before battery life matches our measurements, currently battery life is about three days. Join us on chat if you want the spreadsheet of power measurements/calculations.
-- The Android API needs to be documented better
-- No one has written an iOS app yet. But some good souls [are talking about it](https://github.com/meshtastic/Meshtastic-esp32/issues/14) ;-)
-
-For more details see the [device software TODO](https://github.com/meshtastic/Meshtastic-esp32/blob/master/docs/software/TODO.md) or the [Android app TODO](https://github.com/meshtastic/Meshtastic-Android/blob/master/TODO.md).
-
-# FAQ
-
-If you have a question missing from this faq, please [ask in our discussion forum](https://meshtastic.discourse.group/). And if you are feeling extra generous send in a pull-request for this faq.md with whatever we answered ;-).
-
-## Q: Which of the various supported radios should I buy?
-
-Basically you just need the radio + (optional but recommended) battery. The TBEAM is usually better because it has gps and huge battery socket. The Heltec is basically the same hardware but without the GPS (the phone provides position data to the radio in that case, so the behavior is similar - but it does burn some battery in the phone). Also the battery for the Heltec can be smaller.
-
-In addition to Aliexpress, (banggood.com) usually has stock and faster shipping, or Amazon. If buying a TBEAM, make sure to buy a version that includes the OLED screen - this project doesn't absolutely require the screen, but we use it if is installed.
-
-@claesg has added links to various 3D printable cases, you can see them at (www.meshtastic.org).
-
-## Q: Do you have plans to commercialize this project
-
-Nope. though if some other person/group wanted to use this software and a more customized device we think that would be awesome (as long as they obey the GPL license).
-
-## Q: Does this project use patented algorithms?
-
-(Kindly borrowed from the geeks at [ffmpeg](http://ffmpeg.org/legal.html))
-
-We do not know, we are not lawyers so we are not qualified to answer this. Also we have never read patents to implement any part of this, so even if we were qualified we could not answer it as we do not know what is patented. Furthermore the sheer number of software patents makes it impossible to read them all so no one (lawyer or not) could answer such a question with a definite no. We are merely geeks experimenting on a fun and free project.

docs/hardware/corvus.md

@@ -1,35 +0,0 @@
-# Notes on @BigCorvus boards
-
-## Board version 1.1
-
-variant name lora_relay_v1
-
-### Remaining TODOs
-
-- power hold for the ST7735
-- look at example sketch
-- turn on xmit boost
-
-## Recommendations for future boards
-
-@BigCorvus your board is **really** nice. Here's some ideas for the future:
-
-- make the SWDIO header more standard (the small ARM 2x5 micro footprint?) or at least througholes so it is easy to solder a header
-
-## How to program bootloader
-
-Download from here: https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases
-
-```
-nrfjprog -f nrf52 --eraseall
-Erasing user available code and UICR flash areas.
-Applying system reset.
-
-nrfjprog -f nrf52 --program feather_nrf52840_express_bootloader-0.3.2_s140_6.1.1.hex
-Parsing hex file.
-Reading flash area to program to guarantee it is erased.
-Checking that the area to write is not protected.
-Programming device.
-```
-
-Then reboot the board, if all went well it now shows up as a mountable filesystem on your USB bus.

docs/hardware/cubecell-TODO.md

@@ -1,6 +0,0 @@
-
-https://heltec-automation-docs.readthedocs.io/en/latest/cubecell/index.html
-
-https://github.com/HelTecAutomation/ASR650x-Arduino?utm_source=platformio.org&utm_medium=docs
-
-* Either portfreertos or make not theaded versions of Lock, WorkerThread, Queue (probably the latter).