1.2.39

remove google play link (for now)

.devcontainer/Dockerfile

@@ -0,0 +1,11 @@
+# See here for image contents: https://github.com/microsoft/vscode-dev-containers/tree/v0.162.0/containers/ubuntu/.devcontainer/base.Dockerfile
+
+# [Choice] Ubuntu version: bionic, focal
+ARG VARIANT="focal"
+FROM mcr.microsoft.com/vscode/devcontainers/base:0-${VARIANT}
+
+# [Optional] Uncomment this section to install additional OS packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+     && apt-get -y install python3-distutils python3-pip
+RUN pip3 install platformio meshtastic adafruit-nrfutil
+RUN wget https://github.com/protocolbuffers/protobuf/releases/download/v3.15.8/protoc-3.15.8-linux-x86_64.zip -O /tmp/protoc.zip && cd /tmp && unzip protoc.zip && chmod a+x bin/protoc && cp bin/protoc /usr/local/bin

.devcontainer/devcontainer.json

@@ -0,0 +1,32 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the README at:
+// https://github.com/microsoft/vscode-dev-containers/tree/v0.162.0/containers/ubuntu
+{
+	"name": "Ubuntu",
+	"build": {
+		"dockerfile": "Dockerfile",
+		// Update 'VARIANT' to pick an Ubuntu version: focal, bionic
+		"args": { "VARIANT": "focal" }
+	},
+
+	// Set *default* container specific settings.json values on container create.
+	"settings": { 
+		"terminal.integrated.shell.linux": "/bin/bash"
+	},
+
+	// Add the IDs of extensions you want installed when the container is created.
+	"extensions": [
+        "platformio.platformio-ide",
+        "xaver.clang-format"
+		],
+
+	// Use 'forwardPorts' to make a list of ports inside the container available locally.
+	// "forwardPorts": [],
+
+	// Use 'postCreateCommand' to run commands after the container is created.
+	// "postCreateCommand": "uname -a",
+
+	// Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
+	"remoteUser": "vscode",
+
+	"postCreateCommand": "git submodule update --init"
+}

.github/actions/initbuild/action.yml

@@ -0,0 +1,39 @@
+name: 'Common init'
+
+# WARNING due to https://github.com/actions/runner/issues/646
+# this code can't work - must copy and paste into workflows for now because 'uses' is not supported
+runs:
+  using: "composite"
+  steps:
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    # Don't cache for now because I want to be lazy with portuino updates githashes
+    # - name: Cache platformio
+    #  uses: actions/cache@v1
+    #  id: cache-platformio # needed in if test
+    #  with:
+    #    path: ~/.platformio
+    #    key: ${{ runner.os }}-platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+

.github/pull_request_template.md

@@ -7,7 +7,7 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor,
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
   because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.

.github/workflows/main.yml

@@ -1,26 +1,93 @@
 name: Continuous Integration
 on:
-  - push
-  - pull_request
+  # Triggers the workflow on push or pull request events but only for the master branch
+  push:
+    branches: [ master ]
+  pull_request:
+    branches: [ master ]
 
 jobs:
-  main:
-    name: Main
+  # setup:
+  # runs-on: ubuntu-latest
+  # steps:
+  
+  # - name: Startup
+  #   run: echo "No action setup currently needed, skipping..."
+
+  ci-build:
+    # needs: setup
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@master
-      - name: Checkout submodules
-        uses: textbook/git-checkout-submodule-action@master
-      - name: Setup Python
-        uses: actions/setup-python@master
-        with:
-          python-version: 3.x
-      - name: Install Platform IO
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio
-      - name: Install extra python tools
-        run: |
-          pip install -U adafruit-nrfutil
-      - name: Build
-        run: platformio run -e tbeam -e heltec -e lora-relay-v1 -e linux
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    #- name: Install linux apt packages
+    #  run: |
+    #    sudo apt-get install -y libgpiod-dev
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    # - name: Cache platformio
+    #  uses: actions/cache@v1
+    #  id: cache-platformio # needed in if test
+    #  with:
+    #    path: ~/.platformio
+    #    key: ${{ runner.os }}-platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    # We now run integration test before other build steps (to quickly see runtime failures)
+    - name: Build for native
+      run: platformio run -e native
+    - name: Integration test
+      run: |
+        .pio/build/native/program &
+        sleep 20 # 5 seconds was not enough
+        echo "Simulator started, launching python test..."
+        python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+    # - name: Build for tbeam
+    #   run: platformio run -e tbeam
+    # - name: Build for heltec
+    #   run: platformio run -e heltec
+    # - name: Build for wisblock RAK4631
+    #   run: platformio run -e rak4631
+
+    - name: Build everything
+      run: bin/build-all.sh
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: built
+        path: release/archive/firmware-*.zip
+        retention-days: 30
+
+    - name: Store debugging elf files as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: debug-elfs
+        path: release/archive/elfs-*.zip
+        retention-days: 7

.github/workflows/release.yml

@@ -0,0 +1,90 @@
+name: Make Release
+on:
+  # Can optionally take parameters from the github UI, more info here https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/#:~:text=You%20can%20now%20create%20workflows,the%20workflow%20is%20run%20on.
+  # workflow_dispatch:
+  #  inputs:
+
+  # Only want to be run if a new tag starting with v is pushed.
+  push:
+    branches:
+      - "!*"
+    tags:
+      - "v1*"
+
+jobs:
+  release-build:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+
+    # get github branch and tag names as ${{ steps.branch_name.outputs.SOURCE_TAG }}
+    - name: Branch name
+      id: branch_name
+      run: |
+        echo ::set-output name=SOURCE_NAME::${GITHUB_REF#refs/*/}
+        echo ::set-output name=SOURCE_BRANCH::${GITHUB_REF#refs/heads/}
+        echo ::set-output name=SOURCE_TAG::${GITHUB_REF#refs/tags/}
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    # Note: we don't use caches on release builds because we don't want to accidentally not have a virgin build machine
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    # Will be available in steps.version.outputs.version
+    - name: Get version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+
+    - name: Build everything
+      run: bin/build-all.sh
+
+    - name: Create release
+      uses: actions/create-release@v1
+      id: create_release
+      with:
+        draft: true
+        prerelease: true
+        release_name: ${{ steps.version.outputs.version }} alpha
+        tag_name: ${{ steps.branch_name.outputs.SOURCE_TAG }}
+        # was ${{ github.ref }}
+        body: |
+          Autogenerated by github action, developer should edit as required before publishing...
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+
+    - name: Add bins to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
+        asset_name: firmware-${{ steps.version.outputs.version }}.zip
+        asset_content_type: application/zip
+
+    - name: Add debug elfs to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: release/archive/elfs-${{ steps.version.outputs.version }}.zip
+        asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+        asset_content_type: application/zip        

.gitignore

@@ -9,13 +9,17 @@ main/credentials.h
 !.vscode/extensions.json
 *.code-workspace
 
+.idea/workspace.xml
+
 .DS_Store
 Thumbs.db
 .autotools
 .built
 .context
 .cproject
-.idea/*
 .vagrant
-
+nanopb*
 flash.uf2
+cmake-build*
+__pycache__
+

.gitmodules

@@ -4,3 +4,6 @@
 [submodule "sdk-nrfxlib"]
 	path = sdk-nrfxlib
 	url = https://github.com/nrfconnect/sdk-nrfxlib.git
+[submodule "design"]
+	path = design
+	url = https://github.com/meshtastic/meshtastic-design.git

.idea/codeStyles/Project.xml

@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>

.idea/codeStyles/codeStyleConfig.xml

@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>

.idea/meshtastic-esp32.iml

@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />

.idea/misc.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>

.idea/modules.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/meshtastic-esp32.iml" filepath="$PROJECT_DIR$/.idea/meshtastic-esp32.iml" />
+    </modules>
+  </component>
+</project>

.idea/vcs.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="$PROJECT_DIR$" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/design" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/proto" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/sdk-nrfxlib" vcs="Git" />
+  </component>
+</project>

.vscode/extensions.json

@@ -2,6 +2,7 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+        "platformio.platformio-ide",
+        "xaver.clang-format"
     ]
 }

.vscode/settings.json

@@ -49,7 +49,8 @@
         "string_view": "cpp",
         "cassert": "cpp",
         "iterator": "cpp",
-        "shared_mutex": "cpp"
+        "shared_mutex": "cpp",
+        "iostream": "cpp"
     },
     "cSpell.words": [
         "Blox",
@@ -67,5 +68,14 @@
         "protobufs",
         "wifi"
     ],
-    "C_Cpp.dimInactiveRegions": true
+    "C_Cpp.dimInactiveRegions": true,
+    "cmake.configureOnOpen": true,
+    "protoc": {
+        "compile_on_save": false,
+        "compile_all_path": "/home/kevinh/development/meshtastic/meshtastic-esp32/proto",
+        "options": [
+            "--java_out=/tmp",
+            "-I=/home/kevinh/development/meshtastic/meshtastic-esp32/proto"
+        ]
+    }
 }

CMakeLists.txt

@@ -0,0 +1,36 @@
+# !!! WARNING !!! AUTO-GENERATED FILE, PLEASE DO NOT MODIFY IT AND USE
+# https://docs.platformio.org/page/projectconf/section_env_build.html#build-flags
+#
+# If you need to override existing CMake configuration or add extra,
+# please create `CMakeListsUser.txt` in the root of project.
+# The `CMakeListsUser.txt` will not be overwritten by PlatformIO.
+
+cmake_minimum_required(VERSION 3.13)
+set(CMAKE_SYSTEM_NAME Generic)
+set(CMAKE_C_COMPILER_WORKS 1)
+set(CMAKE_CXX_COMPILER_WORKS 1)
+
+project("meshtastic-esp32" C CXX)
+
+include(CMakeListsPrivate.txt)
+
+if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/CMakeListsUser.txt)
+include(CMakeListsUser.txt)
+endif()
+
+include_directories("$ENV{HOME}/.platformio/packages/framework-portduino")
+include_directories("/usr/include")
+
+add_custom_target(
+    Production ALL
+    COMMAND platformio -c clion run "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_custom_target(
+    Debug ALL
+    COMMAND platformio -c clion run --target debug "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_executable(Z_DUMMY_TARGET ${SRC_LIST})

README.md

@@ -4,7 +4,7 @@ This is the device side code for the [meshtastic.org](https://www.meshtastic.org
 
 ![Continuous Integration](https://github.com/meshtastic/Meshtastic-esp32/workflows/Continuous%20Integration/badge.svg)
 
-Meshtastic™ is a project that lets you use
+Meshtastic® is a project that lets you use
 inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
 essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
 members and any text messages sent to your group chat.
@@ -30,11 +30,14 @@ We currently support three models of radios.
   - [T-Beam V0.7 w/ NEO-6M](https://www.aliexpress.com/item/4000574335430.html) (will work but **you must use the tbeam0.7 firmware ** - but the T-Beam V1.0 or later are better!)
      - board labels "TTGO T22_V07 20180711"
   - 3D printable cases
-    - [T-Beam V0](https://www.thingiverse.com/thing:3773717)
+    - [T-Beam V0](https://www.thingiverse.com/thing:3773717) (GPS and LoRa antenna misaligned if GPS placed as pictured)
     - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:3830711)
-    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297)
+    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:4677388) (Mounting option for larger GPS antenna but LoRa antenna enclosed)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297) (GPS and LoRa antenna misaligned if GPS placed as pictured)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4589651)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4619981) (GPS and LoRa antenna misaligned if GPS placed as pictured)
   - Laser-cut cases
-    - [T-Beam V1](https://www.thingiverse.com/thing:4552771)
+    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:4552771)
 
 - [TTGO LORA32](https://www.aliexpress.com/item/4000211331316.html) - No GPS
   - version 2.1
@@ -43,7 +46,10 @@ We currently support three models of radios.
     - [TTGO LORA32 v1](https://www.thingiverse.com/thing:3385109)
 
 - [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/) - No GPS
+  - [Official Heltec case](https://www.aliexpress.com/item/4001050707951.html)
   - [3D Printable case](https://www.thingiverse.com/thing:3125854)
+  
+Note: The GPS and LoRa stock antennas should be placed in a way, that the GPS antenna faces the sky and the LoRa antenna radiates 360 degrees horizontally. For better GPS reception you might want to [upgrade the GPS antenna](https://meshtastic.discourse.group/t/the-importance-of-gps-antennas-and-request-to-3d-case-documentation-people/1505) and to properly align the antennas you might want to upgrade to a LoRa antenna that can be adjusted to radiate into the right directions.
 
 **Make sure to get the frequency for your country**
 
@@ -181,7 +187,7 @@ Hard resetting via RTS pin...
 
 # Meshtastic Android app
 
-The companion (optional) Meshtastic Android app is [here](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub-dev-readme). You can also download it on Google Play.
+The companion (optional, free, open-source) Meshtastic Android app is available on various appstores [see this page for details](https://github.com/meshtastic/Meshtastic-Android/blob/master/README.md).
 
 # Python API
 
@@ -189,11 +195,11 @@ We offer a [python API](https://github.com/meshtastic/Meshtastic-python) that ma
 
 # Development
 
-We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
+We'd love to have you join us on this merry little project. Please see our [development documents](https://meshtastic.org/docs/software/other/sw-design) and [join us in our discussion forum](https://meshtastic.discourse.group/).
 
 # Credits
 
-This project is run by volunteers. Past contributors include:
+This project is run by volunteers. We are a friendly group and welcome any contribution (code fixes, documentation, features, bug reports etc...).  We try to be good about listing contributor names in release notes, but it has become unwieldy for the main-devs to keep updating the list below and we've neglected it too long.  If you'd like your name included in this list please send a pull request to edit this README and simply add your line yourself.  Thank you very much for your help!
 
 - @astro-arphid: Added support for 433MHz radios in europe.
 - @claesg: Various documentation fixes and 3D print enclosures

bin/build-all.sh

@@ -2,17 +2,15 @@
 
 set -e
 
-source bin/version.sh
+VERSION=`bin/buildinfo.py long`
+SHORT_VERSION=`bin/buildinfo.py short`
 
-COUNTRIES="US EU433 EU865 CN JP ANZ KR"
-#COUNTRIES=US
-#COUNTRIES=CN
-
-BOARDS_ESP32="tlora-v2 tlora-v1 tlora-v2-1-1.6 tbeam heltec tbeam0.7"
-# BOARDS_ESP32=tbeam
+BOARDS_ESP32="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7"
+#BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine
-BOARDS_NRF52="lora-relay-v1"
+BOARDS_NRF52="rak4631 t-echo"
+#BOARDS_NRF52=""
 
 OUTDIR=release/latest
 
@@ -21,35 +19,26 @@ ARCHIVEDIR=release/archive
 
 rm -f $OUTDIR/firmware*
 
-mkdir -p $OUTDIR/bins
-rm -r $OUTDIR/bins/*
+mkdir -p $OUTDIR/bins $ARCHIVEDIR
+rm -r $OUTDIR/bins/* || true
 mkdir -p $OUTDIR/bins/universal $OUTDIR/elfs/universal
 
 # build the named environment and copy the bins to the release directory
 function do_build() {
 	BOARD=$1
-	COUNTRY=$2
 	isNrf=$3
 	
-    echo "Building $COUNTRY for $BOARD with $PLATFORMIO_BUILD_FLAGS"
+    echo "Building for $BOARD with $PLATFORMIO_BUILD_FLAGS"
     rm -f .pio/build/$BOARD/firmware.*
 
     # The shell vars the build tool expects to find
     export APP_VERSION=$VERSION
 
     # Are we building a universal/regionless rom?
-    if [ "x$COUNTRY" != "x" ]
-    then
-        export HW_VERSION="1.0-$COUNTRY"
-        export COUNTRY
-        basename=firmware-$BOARD-$COUNTRY-$VERSION
-    else
-        export HW_VERSION="1.0"
-        unset COUNTRY
-        basename=universal/firmware-$BOARD-$VERSION
-    fi
+    export HW_VERSION="1.0"
+    basename=universal/firmware-$BOARD-$VERSION
 
-    pio run --jobs 4 --environment $BOARD # -v
+    pio run --environment $BOARD # -v
     SRCELF=.pio/build/$BOARD/firmware.elf
     cp $SRCELF $OUTDIR/elfs/$basename.elf
 
@@ -69,10 +58,6 @@ function do_boards() {
 	declare boards=$1
 	declare isNrf=$2
 	for board in $boards; do
-		for country in $COUNTRIES; do 
-		    do_build $board $country "$isNrf"   
-		done
-
 		# Build universal
 		do_build $board "" "$isNrf" 
 	done
@@ -87,8 +72,12 @@ platformio lib update
 do_boards "$BOARDS_ESP32" "false"
 do_boards "$BOARDS_NRF52" "true"
 
+echo "Building SPIFFS for ESP32 targets"
+pio run --environment tbeam -t buildfs
+cp .pio/build/tbeam/spiffs.bin $OUTDIR/bins/universal/spiffs-$VERSION.bin
+
 # keep the bins in archive also
-cp $OUTDIR/bins/firmware* $OUTDIR/elfs/firmware* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
+cp $OUTDIR/bins/universal/spiffs* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
 
 echo Updating android bins $OUTDIR/forandroid
 rm -rf $OUTDIR/forandroid
@@ -103,12 +92,16 @@ release.  It is used by the android app for forcing software updates.  Do not ed
 Generated by bin/buildall.sh -->
 
 <resources>
-    <string name="cur_firmware_version">$VERSION</string>
+    <string name="cur_firmware_version" translatable="false">$VERSION</string>
+    <string name="short_firmware_version" translatable="false">$SHORT_VERSION</string>
 </resources>
 XML
 
 echo Generating $ARCHIVEDIR/firmware-$VERSION.zip
 rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $OUTDIR/bins/firmware-*-$VERSION.* images/system-info.bin bin/device-install.sh bin/device-update.sh
+zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $ARCHIVEDIR/spiffs-$VERSION.bin $OUTDIR/bins/universal/firmware-*-$VERSION.* images/system-info.bin bin/device-install.* bin/device-update.*
+echo Generating $ARCHIVEDIR/elfs-$VERSION.zip
+rm -f $ARCHIVEDIR/elfs-$VERSION.zip
+zip --junk-paths $ARCHIVEDIR/elfs-$VERSION.zip $OUTDIR/elfs/universal/firmware-*-$VERSION.* 
 
 echo BUILT ALL

bin/build-nightly.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+source ~/.bashrc
+
+# Meshtastic Nightly Build Script.
+#  McHamster (jm@casler.org)
+#
+# This is the script that is used for the nightly build server.
+#
+# It's probably not useful for most people, but you may want to run your own
+#   nightly builds.
+#
+# The last line of ~/.bashrc contains an inclusion of platformio in the path.
+#   Without this, the build script won't run from the crontab:
+#
+#    export PATH="$HOME/.platformio/penv/bin:$PATH" 
+#
+# The crontab contains:
+#  0 2 * * * cd ~/meshtastic/github/meshtastic && source "~/.bashrc"; ./build-nightly.sh > ~/cronout.txt 2> ~/cronout.txt
+
+cd Meshtastic-device
+
+git pull
+
+bin/build-all.sh
+
+date_stamp=$(date +'%Y-%m-%d')
+
+cd ..
+
+# TODO: Archive the same binaries used by the build-all script.
+#zip -r meshtastic_device_nightly_${date_stamp} Meshtastic-device/release/latest/bins
+cp Meshtastic-device/release/archive/`ls -t ./Meshtastic-device/release/archive/| head -1` meshtastic_device_nightly_${date_stamp}.zip
+
+# Copy the file to the webserver
+scp meshtastic_device_nightly_${date_stamp}.zip jm@10.11.12.20:/volume1/web/meshtastic/nightly_builds/
+
+# Delete the local copy
+rm meshtastic_device_nightly_${date_stamp}.zip

bin/buildinfo.py

@@ -0,0 +1,9 @@
+#!/usr/bin/env python3
+import configparser
+import sys
+from readprops import readProps
+
+
+verObj = readProps('version.properties')
+propName = sys.argv[1]
+print(f"{verObj[propName]}")

bin/device-install.bat

@@ -0,0 +1,42 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+	%PYTHON% -m esptool --baud 921600 erase_flash
+	%PYTHON% -m esptool --baud 921600 write_flash 0x1000 system-info.bin
+    for %%f in (spiffs-*.bin) do (
+        %PYTHON% -m esptool --baud 921600 write_flash 0x00390000 %%f
+    )
+	%PYTHON% -m esptool --baud 921600 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-install.sh

@@ -1,19 +1,24 @@
 #!/bin/sh
 
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
+set -e
+
 # Usage info
 show_help() {
 cat << EOF
-Usage: ${0##*/} [-h] [-p ESPTOOL_PORT] [-f FILENAME]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
-    -f FILENAME         The .bin file to flash.  Custom to your device type and region.
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
 EOF
 }
 
 
-while getopts ":h:p:f:" opt; do
+while getopts ":hp:P:f:" opt; do
     case "${opt}" in
         h)
             show_help
@@ -21,6 +26,8 @@ while getopts ":h:p:f:" opt; do
             ;;
         p)  export ESPTOOL_PORT=${OPTARG}
 	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
         f)  FILENAME=${OPTARG}
             ;;
         *)
@@ -32,11 +39,17 @@ while getopts ":h:p:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	esptool.py --baud 921600 erase_flash
-	esptool.py --baud 921600 write_flash 0x1000 system-info.bin
-	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 921600 erase_flash
+	$PYTHON -m esptool --baud 921600 write_flash 0x1000 system-info.bin
+	$PYTHON -m esptool --baud 921600 write_flash 0x00390000 spiffs-*.bin
+	$PYTHON -m esptool --baud 921600 write_flash 0x10000 ${FILENAME}
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/device-update.bat

@@ -0,0 +1,39 @@
+@ECHO OFF
+
+set PYTHON=python
+
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+goto EOF
+
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+SHIFT
+IF NOT "__%1__"=="____" goto GETOPTS
+
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+	goto HELP
+)
+IF EXIST %FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %PYTHON% -m esptool --baud 921600 write_flash 0x10000 %FILENAME%
+    echo Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used
+    %PYTHON% -m esptool --baud 921600 erase_region 0xe000 0x2000
+) else (
+    echo "Invalid file: %FILENAME%"
+	goto HELP
+)
+
+:EOF

bin/device-update.sh

@@ -1,19 +1,22 @@
 #!/bin/sh
 
+PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+
 # Usage info
 show_help() {
 cat << EOF
-Usage: ${0##*/} [-h] [-p ESPTOOL_PORT] -f FILENAME
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
-    -f FILENAME         The .bin file to flash.  Custom to your device type and region.
+    -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
 EOF
 }
 
 
-while getopts ":h:p:f:" opt; do
+while getopts ":hp:P:f:" opt; do
     case "${opt}" in
         h)
             show_help
@@ -21,6 +24,8 @@ while getopts ":h:p:f:" opt; do
             ;;
         p)  export ESPTOOL_PORT=${OPTARG}
 	    ;;
+        P)  PYTHON=${OPTARG}
+            ;;
         f)  FILENAME=${OPTARG}
             ;;
         *)
@@ -32,9 +37,16 @@ while getopts ":h:p:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
+[ -z "$FILENAME" -a -n "$1" ] && {
+    FILENAME=$1
+    shift
+}
+
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash update ${FILENAME}."
-	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 921600 write_flash 0x10000 ${FILENAME}
+	echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
+	$PYTHON -m esptool --baud 921600 erase_region 0xe000 0x2000
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/exception_decoder.py

@@ -241,7 +241,7 @@ def print_addr(name, value, resolver):
 def print_stack_full(lines, resolver):
     print("stack:")
     for line in lines:
-        print(line.offset + ":")
+        print(str(line.offset) + ":")
         for content in line.content:
             print("  " + resolver.resolve_stack_addr(content))
 

bin/gen-images.sh

@@ -0,0 +1,19 @@
+
+
+set -e 
+
+# regen the design bins first
+cd design
+bin/generate-pngs.sh
+cd ..
+
+# assumes 50 wide, 28 high
+convert design/logo/png/Mesh_Logo_Black_Small.png -background white -alpha Background src/graphics/img/icon.xbm
+
+inkscape --batch-process -o images/compass.png -w 48 -h 48 images/location_searching-24px.svg
+convert compass.png -background white -alpha Background src/graphics/img/compass.xbm
+
+inkscape --batch-process -o images/face.png -w 13 -h 13 images/face-24px.svg
+
+inkscape --batch-process -o images/pin.png -w 13 -h 13 images/room-24px.svg
+convert pin.png -background white -alpha Background src/graphics/img/pin.xbm

bin/install-eink.sh

@@ -6,6 +6,8 @@ BOOTDIR=/home/kevinh/development/meshtastic/Adafruit_nRF52_Bootloader
 
 nrfjprog --eraseall -f nrf52
 
+# to get tool run "sudo apt-get install srecord"
+
 # this generates an intel hex file that can be programmed into a NRF52 to tell the adafruit bootloader that the current app image is valid
 # Bootloader settings are at BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
 # first 4 bytes should be 0x01 to indicate valid app image
@@ -14,7 +16,7 @@ echo "01 00 00 00 00 00 00 00" | xxd -r -p - >/tmp/bootconf.bin
 srec_cat /tmp/bootconf.bin -binary -offset 0xff000 -output /tmp/bootconf.hex -intel   
 
 echo Generating merged hex file 
-mergehex -m $BOOTDIR/_build/build-ttgo_eink/ttgo_eink_bootloader-0.3.2-125-gf38f8f4-dirty_s140_6.1.1.hex .pio/build/eink/firmware.hex /tmp/bootconf.hex -o ttgo_eink_full.hex
+mergehex -m $BOOTDIR/_build/build-ttgo_eink/ttgo_eink_bootloader-0.3.2-213-gf67f592-dirty_s140_6.1.1.hex .pio/build/eink/firmware.hex /tmp/bootconf.hex -o ttgo_eink_full.hex
 
 echo Telling bootloader app region is valid and telling CPU to run
 nrfjprog --program ttgo_eink_full.hex -f nrf52 --reset

bin/mqtt-listen.sh

@@ -0,0 +1,3 @@
+
+mosquitto_sub -h mqtt.meshtastic.org -v -t \$SYS/\# -t msh/+/stat/\# -t msh/+/json/\#
+# mosquitto_sub -h test.mosquitto.org -v -t mesh/\# -F "%j"

bin/mqtt-send-status.sh

@@ -0,0 +1 @@
+mosquitto_pub -h mqtt.meshtastic.org -u meshdev -P large4cats -t msh/1/stat/FakeNode -m online -d

bin/native-gdbserver.sh

@@ -0,0 +1,3 @@
+set -e
+pio run --environment native
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -0,0 +1,3 @@
+set -e
+pio run --environment native
+.pio/build/native/program "$@"

bin/nrf52840-gdbserver.sh

@@ -1,3 +1,3 @@
 
 
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA
+JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA -SuppressInfoUpdateFW -DisableAutoUpdateFW -rtos GDBServer/RTOSPlugin_FreeRTOS

bin/platformio-custom.py

@@ -0,0 +1,20 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+from readprops import readProps
+
+Import("projenv")
+
+prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
+verObj = readProps(prefsLoc)
+print("Using meshtastic platform-custom.py, firmare version " + verObj['long'])
+# print("path is" + ','.join(sys.path))
+
+# General options that are passed to the C and C++ compilers
+projenv.Append(CCFLAGS=[
+    "-DAPP_VERSION=" + verObj['long'],
+    "-DAPP_VERSION_SHORT=" + verObj['short']    
+])

bin/program-1.0-tbeam.sh

@@ -0,0 +1,3 @@
+esptool.py --baud 921600 write_flash 0x10000 release/archive/old/firmware-tbeam-EU865-1.0.0.bin
+echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
+esptool.py --baud 921600 erase_region 0xe000 0x2000

bin/program-1.1-tbeam.sh

@@ -0,0 +1 @@
+esptool.py --baud 921600 write_flash 0x10000 release/archive/old/firmware-tbeam-1.1.50.bin

bin/program-release-tbeam.sh

@@ -1,6 +1,8 @@
 
 set -e
 
-source bin/version.sh
+VERSION=`bin/buildinfo.py`
+FILENAME=release/latest/bins/universal/firmware-tbeam-$VERSION.bin
 
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-tbeam-US-$VERSION.bin
+echo Installing $FILENAME
+esptool.py --baud 921600 write_flash 0x10000 $FILENAME

bin/program-release-universal.sh

@@ -0,0 +1,6 @@
+
+set -e
+
+source bin/version.sh
+
+esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/universal/firmware-tbeam-$VERSION.bin

bin/promote-release.sh

@@ -0,0 +1,11 @@
+set -e 
+
+echo "This script is only for developers who are publishing new builds on github.  Most users don't need it"
+
+VERSION=`bin/buildinfo.py long`
+
+# Must have a V prefix to trigger github
+git tag "v${VERSION}"
+git push root "v${VERSION}" # push the tag
+
+echo "Tag ${VERSION} pushed to github, github actions should now be building the draft release.  If it seems good, click to publish it"

bin/qspi-flash-test.sh

@@ -1,6 +1,6 @@
 # You probably don't need this - it is a basic test of the serial flash on the TTGO eink board
 
-nrfjprog -qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
+nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --memwr 0x12000000 --val 0xdeadbeef --verify
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --readqspi spi.hex
 objdump -s spi.hex | less

bin/readprops.py

@@ -0,0 +1,37 @@
+
+
+import subprocess
+import configparser
+import traceback
+import sys
+
+
+def readProps(prefsLoc):
+    """Read the version of our project as a string"""
+
+    config = configparser.RawConfigParser()
+    config.read(prefsLoc)
+    version = dict(config.items('VERSION'))
+    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long = "unset")
+
+    # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
+    try:
+        sha = subprocess.check_output(
+            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
+        isDirty = subprocess.check_output(
+            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        suffix = sha
+        if isDirty:
+            # short for 'dirty', we want to keep our verstrings source for protobuf reasons
+            suffix = sha + "-d"
+        verObj['long'] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix)
+    except:
+        # print("Unexpected error:", sys.exc_info()[0])
+        # traceback.print_exc()
+        verObj['long'] = verObj['short']
+
+    # print("firmare version " + verStr)
+    return verObj
+# print("path is" + ','.join(sys.path))

bin/regen-protos.sh

@@ -1,6 +1,15 @@
 #!/bin/bash
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.1"
+set -e
+
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.4 to be located in the"
+echo "meshtastic-device root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.4"
+
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd proto
-../../nanopb-0.4.1-linux-x86/generator-bin/protoc --nanopb_out=-v:../src/mesh -I=../proto mesh.proto
+../nanopb-0.4.4/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../proto *.proto
+
+#echo "Regenerating protobuf documentation - if you see an error message"
+#echo "you can ignore it unless doing a new protobuf release to github."
+#bin/regen-docs.sh

bin/run-both.sh

@@ -0,0 +1,13 @@
+set -e 
+
+TARG=tbeam
+
+pio run -e $TARG
+
+echo uploading to usb1
+pio run --upload-port /dev/ttyUSB1 -t upload -e $TARG &
+
+echo uploading to usb0
+pio run --upload-port /dev/ttyUSB0 -t upload -e $TARG &
+
+wait

bin/test-simulator.sh

@@ -0,0 +1,9 @@
+set -e
+
+echo "Starting simulator"
+.pio/build/native/program &
+sleep 20 # 5 seconds was not enough
+
+echo "Simulator started, launching python test..."
+python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+

bin/upload-to-bootloader.sh

@@ -1,4 +1,5 @@
+set -e
 
 echo "Converting to uf2 for NRF52 Adafruit bootloader"
-bin/uf2conv.py .pio/build/lora-relay-v2/firmware.hex -f 0xADA52840
-# cp flash.uf2 /media/kevinh/FTH*BOOT/
+bin/uf2conv.py .pio/build/t-echo/firmware.hex -f 0xADA52840
+cp flash.uf2 /media/kevinh/FTH*BOOT/

bin/upload-to-rak4631.sh

@@ -0,0 +1,5 @@
+set -e
+
+echo "Converting to uf2 for NRF52 Adafruit bootloader"
+bin/uf2conv.py .pio/build/rak4631/firmware.hex -f 0xADA52840
+cp flash.uf2 /media/kevinh/FTH*BOOT/

bin/version.sh

@@ -1,3 +0,0 @@
-
-
-export VERSION=1.1.8

boards/eink0.1.json

@@ -15,7 +15,7 @@
     ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
-    "variant": "eink",
+    "variant": "eink0.1",
     "variants_dir": "variants",
     "bsp": {
       "name": "adafruit"

boards/lora_isp4520.json

@@ -0,0 +1,48 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/t-echo.json

@@ -0,0 +1,64 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ]
+    ],
+    "usb_product": "TTGO_eink",
+    "mcu": "nrf52840",
+    "variant": "t-echo",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "TTGO eink (Adafruit BSP)",
+    "upload": {
+      "maximum_ram_size": 248832,
+      "maximum_size": 815104,
+      "speed": 115200,
+      "protocol": "nrfutil",
+      "protocols": [
+          "jlink",
+          "nrfjprog",
+          "nrfutil",
+          "stlink"
+      ],
+      "use_1200bps_touch": true,
+      "require_upload_port": true,
+      "wait_for_upload_port": true
+  },
+  "url": "FIXME",
+  "vendor": "TTGO"
+}

boards/wiscore_rak4600.json

@@ -0,0 +1,71 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8029"
+      ],
+      [
+        "0x239A",
+        "0x0029"
+      ],
+      [
+        "0x239A",
+        "0x002A"
+      ],
+      [
+        "0x239A",
+        "0x802A"
+      ]
+    ],
+    "usb_product": "Feather nRF52832 Express",
+    "mcu": "nrf52832",
+    "variant": "WisCore_RAK4600_Board",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    },
+    "zephyr": {
+      "variant": "nrf52_adafruit_feather"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd"
+  },
+  "frameworks": [
+    "arduino",
+    "zephyr"
+  ],
+  "name": "Adafruit Bluefruit nRF52832 Feather",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink"
+    ]
+  },
+  "url": "https://www.adafruit.com/product/3406",
+  "vendor": "Adafruit"
+}

boards/wiscore_rak4631.json

@@ -0,0 +1,72 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "nrf52840_s140_v6.ld"
+        },
+        "core": "nRF5",
+        "cpu": "cortex-m4",
+        "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+        "f_cpu": "64000000L",
+        "hwids": [
+            [
+                "0x239A",
+                "0x8029"
+            ],
+            [
+                "0x239A",
+                "0x0029"
+            ],
+            [
+                "0x239A",
+                "0x002A"
+            ],
+            [
+                "0x239A",
+                "0x802A"
+            ]
+        ],
+        "usb_product": "WisCore RAK4631 Board",
+        "mcu": "nrf52840",
+        "variant": "WisCore_RAK4631_Board",
+        "bsp": {
+            "name": "adafruit"
+        },
+        "softdevice": {
+            "sd_flags": "-DS140",
+            "sd_name": "s140",
+            "sd_version": "6.1.1",
+            "sd_fwid": "0x00B6"
+        },
+        "bootloader": {
+            "settings_addr": "0xFF000"
+        }
+    },
+    "connectivity": [
+        "bluetooth"
+    ],
+    "debug": {
+        "jlink_device": "nRF52840_xxAA",
+        "svd_path": "nrf52840.svd"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "WisCore RAK4631 Board",
+    "upload": {
+        "maximum_ram_size": 248832,
+        "maximum_size": 815104,
+        "speed": 115200,
+        "protocol": "nrfutil",
+        "protocols": [
+            "jlink",
+            "nrfjprog",
+            "nrfutil",
+            "stlink"
+        ],
+        "use_1200bps_touch": true,
+        "require_upload_port": true,
+        "wait_for_upload_port": true
+    },
+    "url": "https://www.rakwireless.com",
+    "vendor": "RAKwireless"
+}

data/static/index.html

@@ -0,0 +1 @@
+not yet supported - soon will be included in build

data/style.css

@@ -1,277 +0,0 @@
-/* latin-ext */
-@font-face {
-  font-family: 'Lato';
-  font-style: normal;
-  font-weight: 400;
-  src: local('Lato Regular'), local('Lato-Regular'), url(./Google.woff2) format('woff2');
-  unicode-range: U+0100-024F, U+0259, U+1E00-1EFF, U+2020, U+20A0-20AB, U+20AD-20CF, U+2113, U+2C60-2C7F, U+A720-A7FF;
-}
-
-
-*, *:before, *:after {
-  box-sizing: border-box;
-}
-
-body {
-  background: #C5DDEB;
-  font: 14px/20px "Lato", Arial, sans-serif;
-  padding: 40px 0;
-  color: white;
-}
-
-
-  
-.grid {
-  display: grid;
-  grid-template-columns:
-	1fr 4fr;
-  grid-template-areas:
-	"header header"
-	"sidebar content";
-  margin: 0 auto;
-  width: 750px;
-  background: #444753;
-  border-radius: 5px;
-}
-
-.top {grid-area: header;}
-.side {grid-area: sidebar;}
-.main {grid-area: content;}
-
-.top {
-  border-bottom: 2px solid white;
-}
-.top-text {
-  font-weight: bold;
-  font-size: 24px;
-  text-align: center;
-  padding: 20px;
-}
-
-.side {
-  width: 260px;
-  float: left;
-}
-.side .side-header {
-  padding: 20px;
-  border-bottom: 2px solid white;
-}
-
-.side .side-header .side-text {
-  padding-left: 10px;
-  margin-top: 6px;
-  font-size: 16px;
-  text-align: left;
-  font-weight: bold;
-  
-}
-
-.channel-list ul {
-  padding: 20px;
-  height: 570px;
-  list-style-type: none;
-}
-.channel-list ul li {
-  padding-bottom: 20px;
-}
-
-.channel-list .channel-name {
-  font-size: 20px;
-  margin-top: 8px;
-  padding-left: 8px;
-}
-
-.channel-list .message-count {
-  padding-left: 16px;
-  color: #92959E;
-}
-
-.icon {
-  display: inline-block;
-  width: 1em;
-  height: 1em;
-  stroke-width: 0;
-  stroke: currentColor;
-  fill: currentColor;
-}
-
-.icon-map-marker {
-  width: 0.5714285714285714em;
-}
-
-.icon-circle {
-  width: 0.8571428571428571em;
-}
-
-.content {
-  display: flex;
-  flex-direction: column;
-  flex-wrap: nowrap;
-/* width: 490px; */
-  float: left;
-  background: #F2F5F8;
-/*  border-top-right-radius: 5px;
-  border-bottom-right-radius: 5px; */
-  color: #434651;
-}
-.content .content-header {
-  flex-grow: 0;
-  padding: 20px;
-  border-bottom: 2px solid white;
-}
-
-.content .content-header .content-from {
-  padding-left: 10px;
-  margin-top: 6px;
-  font-size: 20px;
-  text-align: center;
-  font-size: 16px;
-}
-.content .content-header .content-from .content-from-highlight {
-  font-weight: bold;
-}
-.content .content-header .content-num-messages {
-  color: #92959E;
-}
-
-.content .content-history {
-  flex-grow: 1;
-  padding: 20px 20px 20px;
-  border-bottom: 2px solid white;
-  overflow-y: scroll;
-  height: 375px;
-}
-.content .content-history ul {
-  list-style-type: none;
-  padding-inline-start: 10px;
-}
-.content .content-history .message-data {
-  margin-bottom: 10px;
-}
-.content .content-history .message-data-time {
-  color: #a8aab1;
-  padding-left: 6px;
-}
-.content .content-history .message {
-  color: white;
-  padding: 8px 10px;
-  line-height: 20px;
-  font-size: 14px;
-  border-radius: 7px;
-  margin-bottom: 30px;
-  width: 90%;
-  position: relative;
-}
-.content .content-history .message:after {
-  bottom: 100%;
-  left: 7%;
-  border: solid transparent;
-  content: " ";
-  height: 0;
-  width: 0;
-  position: absolute;
-  pointer-events: none;
-  border-bottom-color: #86BB71;
-  border-width: 10px;
-  margin-left: -10px;
-}
-.content .content-history .my-message {
-  background: #86BB71;
-}
-.content .content-history .other-message {
-  background: #94C2ED;
-}
-.content .content-history .other-message:after {
-  border-bottom-color: #94C2ED;
-  left: 93%;
-}
-.content .content-message {
-  flex-grow: 0;
-  padding: 10px;
-}
-.content .content-message textarea {
-  width: 100%;
-  border: none;
-  padding: 10px 10px;
-  font: 14px/22px "Lato", Arial, sans-serif;
-  margin-bottom: 10px;
-  border-radius: 5px;
-  resize: none;
-}
-
-.content .content-message button {
-  float: right;
-  color: #94C2ED;
-  font-size: 16px;
-  text-transform: uppercase;
-  border: none;
-  cursor: pointer;
-  font-weight: bold;
-  background: #F2F5F8;
-}
-.content .content-message button:hover {
-  color: #75b1e8;
-}
-/* Tooltip container */
-.tooltip {
-  color: #86BB71;
-  position: relative;
-  display: inline-block;
-  border-bottom: 1px dotted black; /* If you want dots under the hoverable text */
-}
-/* Tooltip text */
-.tooltip .tooltiptext {
-  visibility: hidden;
-  width: 120px;
-  background-color: #444753;
-  color: #fff;
-  text-align: center;
-  padding: 5px 0;
-  border-radius: 6px;
-   /* Position the tooltip text - see examples below! */
-  position: absolute;
-  z-index: 1;
-}
-
-/* Show the tooltip text when you mouse over the tooltip container */
-.tooltip:hover .tooltiptext {
-  visibility: visible;
-}
-
-.online, .offline, .me {
-  margin-right: 3px;
-  font-size: 10px;
-}
-
-.online {
-  color: #86BB71;
-}
-
-.offline {
-  color: #E38968;
-}
-
-.me {
-  color: #94C2ED;
-}
-
-.align-left {
-  text-align: left;
-}
-
-.align-right {
-  text-align: right;
-}
-
-.float-right {
-  float: right;
-}
-
-.clearfix:after {
-  visibility: hidden;
-  display: block;
-  font-size: 0;
-  content: " ";
-  clear: both;
-  height: 0;
-}

docs/.well-known/assetlinks.json

@@ -1,9 +0,0 @@
-[{
-  "relation": ["delegate_permission/common.handle_all_urls"],
-  "target": {
-    "namespace": "android_app",
-    "package_name": "com.geeksville.mesh",
-    "sha256_cert_fingerprints":
-    ["D0:05:E7:8B:D2:1B:FA:94:56:1D:6B:90:EB:53:07:1A:74:4F:D9:C2:6F:13:87:6A:D9:17:4F:C2:59:48:02:9D", "42:17:52:DC:57:40:38:B5:6B:86:61:1C:2F:47:DB:2B:0F:A2:EA:59:E1:18:9C:AA:90:8D:37:D6:CD:40:0E:BB", "A9:3B:45:65:68:C1:75:DB:08:00:A0:9F:06:77:7F:89:2D:81:24:32:AD:B8:A3:DF:73:BC:3E:7F:06:C8:0C:6D"]
-  }
-}]

docs/CNAME

@@ -1 +0,0 @@
-www.meshtastic.org

docs/README.md

@@ -1,92 +0,0 @@
-# What is Meshtastic?
-
-Meshtastic™ is a project that lets you use
-inexpensive (\$30 ish) GPS radios as an extensible, long battery life, secure, mesh GPS communicator. These radios are great for hiking, skiing, paragliding - essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other members and any text messages sent to your group chat.
-
-The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios will optionally work with your phone, but no phone is required.
-
-Note: Questions after reading this? See our new [forum](https://meshtastic.discourse.group/).
-
-### Uses
-
-- Outdoor sports where cellular coverage is limited. (Hiking, Skiing, Boating, Paragliding, Gliders etc..)
-- Applications where closed source GPS communicators just won't cut it (it is easy to add features for glider pilots etc...)
-- Secure long-range communication within groups without depending on cellular providers
-- Finding your lost kids ;-)
-- Through our [python API](https://pypi.org/project/meshtastic/) use these inexpensive radios to easily add mesh networking to your own projects.
-
-[![Youtube video demo](desk-video-screenshot.png)](https://www.youtube.com/watch?v=WlNbMbVZlHI "Meshtastic early demo")
-
-### Features
-
-Not all of these features are fully implemented yet - see **important** disclaimers below. But they should be in by the time we decide to call this project beta (three months?)
-
-- Very long battery life (should be about eight days with the beta software)
-- Built in GPS and [LoRa](https://en.wikipedia.org/wiki/LoRa) radio, but we manage the radio automatically for you
-- Long range - a few miles per node but each node will forward packets as needed
-- Secure - channels are encrypted by AES256 (But see important disclaimers below wrt this feature)
-- Shows direction and distance to all members of your channel
-- Directed or broadcast text messages for channel members
-- Open and extensible codebase supporting multiple hardware vendors - no lock in to one vendor
-- Communication API for bluetooth devices (such as our Android app) to use the mesh. An iOS application is in the works. And [Meshtastic-python](https://pypi.org/project/meshtastic/) provides access from desktop computers.
-- Very easy sharing of private secured channels. Just share a special link or QR code with friends and they can join your encrypted mesh
-
-This project is currently in beta testing but it is fairly stable and feature complete - if you have questions please [join our discussion forum](https://meshtastic.discourse.group/).
-
-This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the [forum](https://meshtastic.discourse.group/).
-
-### Beginner's Guide
-
-For an detailed walk-through aimed at beginners, we recommend [meshtastic.letstalkthis.com](https://meshtastic.letstalkthis.com/).
-
-# Updates
-
-Note: Updates are happening almost daily, only major updates are listed below. For more details see our forum.
-
-- 09/14/2020 - 1.0.0 Now with over 1700 android users, over 2000 nodes and translated into 15 languages. This project will always be a "beta" experiment, but now quite usable. We are currently selecting 1.1 features in our discussion forum.
-- 06/24/2020 - 0.7.x Now with over 1000 android users, over 600 people using the radios and translated into 22 languages. Fairly stable and we are working through bugs to get to 1.0.
-- 06/04/2020 - 0.6.7 Beta releases of both the application and the device code are released. Features are fairly solid now with a sizable number of users.
-- 04/28/2020 - 0.6.0 [Python API](https://pypi.org/project/meshtastic/) released. Makes it easy to use meshtastic devices as "zero config / just works" mesh transport adapters for other projects.
-- 04/20/2020 - 0.4.3 Pretty solid now both for the android app and the device code. Many people have donated translations and code. Probably going to call it a beta soon.
-- 03/03/2020 - 0.0.9 of the Android app and device code is released. Still an alpha but fairly functional.
-- 02/25/2020 - 0.0.4 of the Android app is released. This is a very early alpha, see below to join the alpha-testers group.
-- 02/23/2020 - 0.0.4 release. Still very bleeding edge but much closer to the final power management, a charged T-BEAM should run for many days with this load. If you'd like to try it, we'd love your feedback. Click [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md) for instructions.
-- 02/20/2020 - Our first alpha release (0.0.3) of the radio software is ready brave early people.
-
-## Meshtastic Android app
-
-Our Android application is available here:
-
-[![Download at https://play.google.com/store/apps/details?id=com.geeksville.mesh](https://play.google.com/intl/en_us/badges/static/images/badges/en_badge_web_generic.png)](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub-homepage)
-
-The link above will return older more stable releases. We would prefer if you join our alpha-test group, because the application is rapidly improving. Three steps to opt-in to the alpha- test:
-
-1. Join [this Google group](https://groups.google.com/forum/#!forum/meshtastic-alpha-testers) with the account you use in Google Play.
-2. Go to this [URL](https://play.google.com/apps/testing/com.geeksville.mesh) to opt-in to the alpha test.
-3. If you encounter any problems or have questions, post in our [forum](https://meshtastic.discourse.group/) and we'll help.
-
-If you'd like to help with development, the source code is [on github](https://github.com/meshtastic/Meshtastic-Android).
-
-The app is also distributed for Amazon Fire devices via the Amazon appstore: [![Amazon appstore link](https://raw.githubusercontent.com/meshtastic/Meshtastic-device/master/images/amazon-fire-button.png)](https://www.amazon.com/Geeksville-Industries-Meshtastic/dp/B08CY9394Q)
-
-## Supported hardware
-
-We currently support two brands of radios. The [TTGO T-Beam](https://www.aliexpress.com/item/4001178678568.html) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/). Most people should buy the T-Beam and a 18650 battery (total cost less than \$35). Also, the version of the T-Beam we link to is shipped with Meshtastic **preinstalled** by TTGO, so you don't have to install it yourself.
-
-Make sure to buy the frequency range which is legal for your country. For the USA, you should buy the 915MHz version. Getting a version that include a screen is optional, but highly recommended.
-
-Instructions for installing prebuilt firmware can be found [here](https://github.com/meshtastic/Meshtastic-esp32/blob/master/README.md).
-
-For a nice looking cases:
-
-- 3D printable cases
-  1. TTGO T-Beam V0 see this [design](https://www.thingiverse.com/thing:3773717) by [bsiege](https://www.thingiverse.com/bsiege).
-  2. TTGO T_Beam V1 (SMA) see this [design](https://www.thingiverse.com/thing:3830711) by [rwanrooy](https://www.thingiverse.com/rwanrooy) or this [remix](https://www.thingiverse.com/thing:3949330) by [8ung](https://www.thingiverse.com/8ung)
-  3. TTGO T_Beam V1 (IPEX) see this [design](https://www.thingiverse.com/thing:4587297) by [drewsed](https://www.thingiverse.com/drewsed)
-  4. Heltec Lora32 see this [design](https://www.thingiverse.com/thing:3125854) by [ornotermes](https://www.thingiverse.com/ornotermes).
-- Laser-cut cases
-  1. TTGO T_Beam V1 (SMA) see this [design](https://www.thingiverse.com/thing:4552771) by [jefish](https://www.thingiverse.com/jefish)
-
-# IMPORTANT DISCLAIMERS AND FAQ
-
-For a listing of currently missing features and a FAQ click [here](faq.md).

docs/SupportedHardware.md

@@ -1,8 +0,0 @@
-| Vendor  | Product line  | Version  | Board labels  | Notes  | URL |
-|---|---|---|---|---|---|
-| TTGO  | T-Beam  | 0.7  | T22_V07 20180711  | LoRa 433/470MHz *OR* LoRa 868/915MHz , <br/>GPS ublox NEO-6M , <br/>battery holder for Li-Ion 18650  |  [buy](https://www.aliexpress.com/item/4000574335430.html)  |
-| TTGO  | T-Beam  | 1.0  |   |   |  [buy](https://www.aliexpress.com/item/4001178678568.html)  |
-| TTGO  | T-Beam  | 1.1  | T22_V11 20191212 | LoRa 433/470MHz *OR* LoRa 868/915MHz *OR* LoRa 923MHz , <br/>GPS ublox NEO-M8N , <br/>battery holder for Li-Ion 18650  | [buy](https://www.aliexpress.com/item/4001178678568.html) |
-| TTGO  | Lora32  | 2.0  | *missing*  | LoRa 433/470MHz *OR* LoRa 868/915MHz , <br/>OLED SSD1306 , <br/>SD card holder | [buy](https://www.aliexpress.com/item/4000211331316.html) |
-| TTGO  | Lora32  | 2.1  | T3_V1.6 20180606  | LoRa 32 (V2) , <br/>SD card holder | [buy](https://www.aliexpress.com/item/4000119208093.html) |
-| Heltec | Lora 32 | V2  | V2 | LoRa 433/470MHz *OR* LoRa 868/915MHz | [buy](https://heltec.org/project/wifi-lora-32/) |

docs/_config.yml

@@ -1,8 +0,0 @@
-theme: jekyll-theme-cayman
-
-title: Meshtastic
-description: An opensource hiking, pilot, skiing, secure GPS mesh communicator
-google_analytics: G-DRZ5H5EXHV
-
-include: [".well-known"]
-

docs/editing-this-site.md

@@ -1,10 +0,0 @@
-If you'd like to edit this website and test it locally:
-
-Not yet implemented:
-Per https://help.github.com/en/github/working-with-github-pages/testing-your-github-pages-site-locally-with-jekyll
-
-* follow instructions here: https://jekyllrb.com/docs/installation/ubuntu/
-* run "run-locally.sh"
-* view webpages at localhost:4000
-
-The template seems to come from here: https://github.com/pages-themes/cayman

docs/faq.md

@@ -1,34 +0,0 @@
-# Disclaimers
-
-This project is still pretty young but moving at a pretty good pace. Not all features are fully implemented in the current alpha builds.
-Most of these problems should be solved by the beta release (within three months):
-
-- We don't make these devices and they haven't been tested by UL or the FCC. If you use them you are experimenting and we can't promise they won't burn your house down ;-)
-- The encryption implementation is good but see this list of [caveats](software/crypto.md#summary-of-strengthsweaknesses-of-our-current-implementation) to determine risks you might face.
-- A number of (straightforward) software work items have to be completed before battery life matches our measurements, currently battery life is about three days. Join us on chat if you want the spreadsheet of power measurements/calculations.
-- The Android API needs to be documented better
-- No one has written an iOS app yet. But some good souls [are talking about it](https://github.com/meshtastic/Meshtastic-esp32/issues/14) ;-)
-
-For more details see the [device software TODO](https://github.com/meshtastic/Meshtastic-esp32/blob/master/docs/software/TODO.md) or the [Android app TODO](https://github.com/meshtastic/Meshtastic-Android/blob/master/TODO.md).
-
-# FAQ
-
-If you have a question missing from this faq, please [ask in our discussion forum](https://meshtastic.discourse.group/). And if you are feeling extra generous send in a pull-request for this faq.md with whatever we answered ;-).
-
-## Q: Which of the various supported radios should I buy?
-
-Basically you just need the radio + (optional but recommended) battery. The TBEAM is usually better because it has gps and huge battery socket. The Heltec is basically the same hardware but without the GPS (the phone provides position data to the radio in that case, so the behavior is similar - but it does burn some battery in the phone). Also the battery for the Heltec can be smaller.
-
-In addition to Aliexpress, (banggood.com) usually has stock and faster shipping, or Amazon. If buying a TBEAM, make sure to buy a version that includes the OLED screen - this project doesn't absolutely require the screen, but we use it if is installed.
-
-@claesg has added links to various 3D printable cases, you can see them at (www.meshtastic.org).
-
-## Q: Do you have plans to commercialize this project
-
-Nope. though if some other person/group wanted to use this software and a more customized device we think that would be awesome (as long as they obey the GPL license).
-
-## Q: Does this project use patented algorithms?
-
-(Kindly borrowed from the geeks at [ffmpeg](http://ffmpeg.org/legal.html))
-
-We do not know, we are not lawyers so we are not qualified to answer this. Also we have never read patents to implement any part of this, so even if we were qualified we could not answer it as we do not know what is patented. Furthermore the sheer number of software patents makes it impossible to read them all so no one (lawyer or not) could answer such a question with a definite no. We are merely geeks experimenting on a fun and free project.

docs/hardware/corvus.md

@@ -1,35 +0,0 @@
-# Notes on @BigCorvus boards
-
-## Board version 1.1
-
-variant name lora_relay_v1
-
-### Remaining TODOs
-
-- power hold for the ST7735
-- look at example sketch
-- turn on xmit boost
-
-## Recommendations for future boards
-
-@BigCorvus your board is **really** nice. Here's some ideas for the future:
-
-- make the SWDIO header more standard (the small ARM 2x5 micro footprint?) or at least througholes so it is easy to solder a header
-
-## How to program bootloader
-
-Download from here: https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases
-
-```
-nrfjprog -f nrf52 --eraseall
-Erasing user available code and UICR flash areas.
-Applying system reset.
-
-nrfjprog -f nrf52 --program feather_nrf52840_express_bootloader-0.3.2_s140_6.1.1.hex
-Parsing hex file.
-Reading flash area to program to guarantee it is erased.
-Checking that the area to write is not protected.
-Programming device.
-```
-
-Then reboot the board, if all went well it now shows up as a mountable filesystem on your USB bus.

docs/hardware/cubecell-TODO.md

@@ -1,6 +0,0 @@
-
-https://heltec-automation-docs.readthedocs.io/en/latest/cubecell/index.html
-
-https://github.com/HelTecAutomation/ASR650x-Arduino?utm_source=platformio.org&utm_medium=docs
-
-* Either portfreertos or make not theaded versions of Lock, WorkerThread, Queue (probably the latter).

docs/privacy.md

@@ -1,11 +0,0 @@
-# Meshtastic privacy policy
-
-We don't collect any personal identifying information.  
-
-If you have opted-in to analytics (thank you - that helps us know what things we need to improve), we'll receive anonymized information about user behavior.  i.e. which screens you used in the app etc...  We never
-capture usernames, the contents of your texts or your location.
-
-This is an open-source project run by hobbyists and we try to be completely transparent.  If you have questions on this policy, please file [a github issue](https://github.com/meshtastic/meshtastic-esp32/issues) and we'll reply/clarify/correct.
-
-Keep being awesome!
-