Merge pull request #746 from geeksville/dev1.2

fixing bugs for the sat release

.github/pull_request_template.md

@@ -7,7 +7,7 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor,
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
   because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.

.github/workflows/main.yml

@@ -4,23 +4,38 @@ on:
   - pull_request
 
 jobs:
-  main:
-    name: Main
+  setup:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@master
-      - name: Checkout submodules
-        uses: textbook/git-checkout-submodule-action@master
+      - name: Checkout code
+        uses: actions/checkout@v2
+        with:
+          submodules: true
       - name: Setup Python
-        uses: actions/setup-python@master
+        uses: actions/setup-python@v2
         with:
           python-version: 3.x
-      - name: Install Platform IO
+      - name: Install Platform IO and meshtastic-python
         run: |
           python -m pip install --upgrade pip
-          pip install -U platformio
+          pip install -U platformio meshtastic
       - name: Install extra python tools
         run: |
           pip install -U adafruit-nrfutil
-      - name: Build
-        run: platformio run -e tbeam -e heltec -e lora-relay-v1 -e linux
+      - name: Install libs needed for linux build
+        run: |
+          sudo apt install -y libpsocksxx-dev
+      - name: Build for tbeam
+        run: platformio run -e tbeam
+      - name: Build for heltec
+        run: platformio run -e heltec
+      - name: Build for lora-relay-v1
+        run: platformio run -e lora-relay-v1 
+      - name: Build for native
+        run: platformio run -e native
+      - name: Integration test
+        run: |
+          .pio/build/native/program &
+          sleep 1
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+

.gitignore

@@ -15,7 +15,8 @@ Thumbs.db
 .built
 .context
 .cproject
-.idea/*
 .vagrant
-
+nanopb*
 flash.uf2
+cmake-build*
+

.gitmodules

@@ -4,3 +4,6 @@
 [submodule "sdk-nrfxlib"]
 	path = sdk-nrfxlib
 	url = https://github.com/nrfconnect/sdk-nrfxlib.git
+[submodule "design"]
+	path = design
+	url = https://github.com/meshtastic/meshtastic-design.git

.idea/codeStyles/Project.xml

@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>

.idea/codeStyles/codeStyleConfig.xml

@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>

.idea/meshtastic-esp32.iml

@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />

.idea/misc.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>

.idea/modules.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/meshtastic-esp32.iml" filepath="$PROJECT_DIR$/.idea/meshtastic-esp32.iml" />
+    </modules>
+  </component>
+</project>

.idea/vcs.xml

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="$PROJECT_DIR$" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/design" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/proto" vcs="Git" />
+    <mapping directory="$PROJECT_DIR$/sdk-nrfxlib" vcs="Git" />
+  </component>
+</project>

.idea/workspace.xml

@@ -0,0 +1,137 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeRunConfigurationManager" shouldGenerate="true" shouldDeleteObsolete="true">
+    <generated>
+      <config projectName="meshtastic-esp32" targetName="Debug" />
+      <config projectName="meshtastic-esp32" targetName="Production" />
+      <config projectName="meshtastic-esp32" targetName="Z_DUMMY_TARGET" />
+    </generated>
+  </component>
+  <component name="CMakeSettings">
+    <configurations>
+      <configuration PROFILE_NAME="native" CONFIG_NAME="native" ENABLED="true" />
+    </configurations>
+  </component>
+  <component name="ChangeListManager">
+    <list default="true" id="58922733-b05b-4b90-9655-b9b18914977a" name="Default Changelist" comment="">
+      <change beforePath="$PROJECT_DIR$/.idea/workspace.xml" beforeDir="false" afterPath="$PROJECT_DIR$/.idea/workspace.xml" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/docs/software/TODO.md" beforeDir="false" afterPath="$PROJECT_DIR$/docs/software/TODO.md" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/proto" beforeDir="false" afterPath="$PROJECT_DIR$/proto" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/src/mesh/generated/mesh.pb.h" beforeDir="false" afterPath="$PROJECT_DIR$/src/mesh/generated/mesh.pb.h" afterDir="false" />
+    </list>
+    <option name="SHOW_DIALOG" value="false" />
+    <option name="HIGHLIGHT_CONFLICTS" value="true" />
+    <option name="HIGHLIGHT_NON_ACTIVE_CHANGELIST" value="false" />
+    <option name="LAST_RESOLUTION" value="IGNORE" />
+  </component>
+  <component name="ExecutionTargetManager" SELECTED_TARGET="CMakeBuildProfile:native" />
+  <component name="Git.Settings">
+    <option name="RECENT_GIT_ROOT_PATH" value="$PROJECT_DIR$" />
+  </component>
+  <component name="ProjectId" id="1pmWHw2wau2TbdKvXvmQUB0EUE9" />
+  <component name="ProjectLevelVcsManager" settingsEditedManually="true" />
+  <component name="ProjectViewState">
+    <option name="hideEmptyMiddlePackages" value="true" />
+    <option name="showLibraryContents" value="true" />
+  </component>
+  <component name="PropertiesComponent">
+    <property name="ASKED_ADD_EXTERNAL_FILES" value="true" />
+    <property name="RunOnceActivity.OpenProjectViewOnStart" value="true" />
+    <property name="RunOnceActivity.ShowReadmeOnStart" value="true" />
+    <property name="WebServerToolWindowFactoryState" value="false" />
+    <property name="cf.advertisement.text.overridden" value="true" />
+    <property name="cf.first.check.clang-format" value="false" />
+    <property name="node.js.detected.package.eslint" value="true" />
+    <property name="node.js.detected.package.tslint" value="true" />
+    <property name="node.js.path.for.package.eslint" value="project" />
+    <property name="node.js.path.for.package.tslint" value="project" />
+    <property name="node.js.selected.package.eslint" value="(autodetect)" />
+    <property name="node.js.selected.package.tslint" value="(autodetect)" />
+    <property name="settings.editor.selected.configurable" value="CMakeSettings" />
+  </component>
+  <component name="RunManager" selected="PlatformIO.PlatformIO Upload">
+    <configuration default="true" type="CLion_Remote" version="1" remoteCommand="tcp:localhost:2345" symbolFile="" sysroot="">
+      <debugger kind="GDB" isBundled="true" />
+      <method v="2" />
+    </configuration>
+    <configuration name="gdbremote-localhost-2345" type="CLion_Remote" version="1" remoteCommand="tcp:localhost:2345" symbolFile="" sysroot="">
+      <debugger kind="GDB" isBundled="true" />
+      <method v="2" />
+    </configuration>
+    <configuration name="Z_DUMMY_TARGET" type="CMakeRunConfiguration" factoryName="Application" REDIRECT_INPUT="false" ELEVATE="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="meshtastic-esp32" TARGET_NAME="Z_DUMMY_TARGET" CONFIG_NAME="native" RUN_TARGET_PROJECT_NAME="meshtastic-esp32" RUN_TARGET_NAME="Z_DUMMY_TARGET">
+      <method v="2">
+        <option name="com.jetbrains.cidr.execution.CidrBuildBeforeRunTaskProvider$BuildBeforeRunTask" enabled="true" />
+      </method>
+    </configuration>
+    <configuration default="true" type="GradleAppRunConfiguration" factoryName="Application" REDIRECT_INPUT="false" ELEVATE="false" PASS_PARENT_ENVS_2="true">
+      <method v="2">
+        <option name="com.jetbrains.cidr.cpp.gradle.execution.GradleNativeBuildBeforeRunTaskProvider$BuildBeforeRunTask" enabled="true" />
+      </method>
+    </configuration>
+    <configuration name="PlatformIO Debug" type="platformio" factoryName="PlatformIO Debug" REDIRECT_INPUT="false" ELEVATE="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="meshtastic-esp32" TARGET_NAME="Debug" CONFIG_NAME="native" RUN_TARGET_PROJECT_NAME="meshtastic-esp32" RUN_TARGET_NAME="Debug">
+      <method v="2">
+        <option name="com.jetbrains.cidr.execution.CidrBuildBeforeRunTaskProvider$BuildBeforeRunTask" enabled="true" />
+      </method>
+    </configuration>
+    <configuration name="PlatformIO Upload" type="platformio" factoryName="PlatformIO Upload" REDIRECT_INPUT="false" ELEVATE="false" PASS_PARENT_ENVS_2="true" PROJECT_NAME="meshtastic-esp32" TARGET_NAME="Production" CONFIG_NAME="native" RUN_TARGET_PROJECT_NAME="meshtastic-esp32" RUN_TARGET_NAME="Production">
+      <method v="2">
+        <option name="com.jetbrains.cidr.execution.CidrBuildBeforeRunTaskProvider$BuildBeforeRunTask" enabled="true" />
+      </method>
+    </configuration>
+    <list>
+      <item itemvalue="CMake Application.Z_DUMMY_TARGET" />
+      <item itemvalue="GDB Remote Debug.gdbremote-localhost-2345" />
+      <item itemvalue="PlatformIO.PlatformIO Debug" />
+      <item itemvalue="PlatformIO.PlatformIO Upload" />
+    </list>
+  </component>
+  <component name="SpellCheckerSettings" RuntimeDictionaries="0" Folders="0" CustomDictionaries="0" DefaultDictionary="application-level" UseSingleDictionary="true" transferred="true" />
+  <component name="TaskManager">
+    <task active="true" id="Default" summary="Default task">
+      <changelist id="58922733-b05b-4b90-9655-b9b18914977a" name="Default Changelist" comment="" />
+      <created>1615788661896</created>
+      <option name="number" value="Default" />
+      <option name="presentableId" value="Default" />
+      <updated>1615788661896</updated>
+      <workItem from="1615788663210" duration="6661000" />
+      <workItem from="1615938346019" duration="1208000" />
+      <workItem from="1615971126983" duration="5945000" />
+    </task>
+    <servers />
+  </component>
+  <component name="TypeScriptGeneratedFilesManager">
+    <option name="version" value="3" />
+  </component>
+  <component name="Vcs.Log.Tabs.Properties">
+    <option name="TAB_STATES">
+      <map>
+        <entry key="MAIN">
+          <value>
+            <State />
+          </value>
+        </entry>
+      </map>
+    </option>
+    <option name="oldMeFiltersMigrated" value="true" />
+  </component>
+  <component name="XDebuggerManager">
+    <breakpoint-manager>
+      <breakpoints>
+        <line-breakpoint enabled="true" type="com.jetbrains.cidr.execution.debugger.OCBreakpointType">
+          <url>file://$PROJECT_DIR$/src/mesh/StreamAPI.cpp</url>
+          <line>20</line>
+          <option name="timeStamp" value="4" />
+        </line-breakpoint>
+        <line-breakpoint enabled="true" type="com.jetbrains.cidr.execution.debugger.OCBreakpointType">
+          <url>file://$PROJECT_DIR$/src/mesh/wifi/WiFiServerAPI.cpp</url>
+          <line>53</line>
+          <option name="timeStamp" value="6" />
+        </line-breakpoint>
+      </breakpoints>
+    </breakpoint-manager>
+  </component>
+  <component name="XSLT-Support.FileAssociations.UIState">
+    <expand />
+    <select />
+  </component>
+</project>

.vscode/extensions.json

@@ -2,6 +2,7 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+        "platformio.platformio-ide",
+        "xaver.clang-format"
     ]
 }

.vscode/settings.json

@@ -49,7 +49,8 @@
         "string_view": "cpp",
         "cassert": "cpp",
         "iterator": "cpp",
-        "shared_mutex": "cpp"
+        "shared_mutex": "cpp",
+        "iostream": "cpp"
     },
     "cSpell.words": [
         "Blox",
@@ -67,5 +68,15 @@
         "protobufs",
         "wifi"
     ],
-    "C_Cpp.dimInactiveRegions": true
+    "C_Cpp.dimInactiveRegions": true,
+    "cmake.configureOnOpen": true,
+    "protoc": {
+        "compile_on_save": false,
+        "compile_all_path": "/home/kevinh/development/meshtastic/meshtastic-esp32/proto",
+        "options": [
+            "--java_out=/tmp",
+            "-I=/home/kevinh/development/meshtastic/meshtastic-esp32/proto"
+        ]
+    },
+    "editor.formatOnSave": true
 }

CMakeLists.txt

@@ -0,0 +1,36 @@
+# !!! WARNING !!! AUTO-GENERATED FILE, PLEASE DO NOT MODIFY IT AND USE
+# https://docs.platformio.org/page/projectconf/section_env_build.html#build-flags
+#
+# If you need to override existing CMake configuration or add extra,
+# please create `CMakeListsUser.txt` in the root of project.
+# The `CMakeListsUser.txt` will not be overwritten by PlatformIO.
+
+cmake_minimum_required(VERSION 3.13)
+set(CMAKE_SYSTEM_NAME Generic)
+set(CMAKE_C_COMPILER_WORKS 1)
+set(CMAKE_CXX_COMPILER_WORKS 1)
+
+project("meshtastic-esp32" C CXX)
+
+include(CMakeListsPrivate.txt)
+
+if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/CMakeListsUser.txt)
+include(CMakeListsUser.txt)
+endif()
+
+include_directories("$ENV{HOME}/.platformio/packages/framework-portduino")
+include_directories("/usr/include")
+
+add_custom_target(
+    Production ALL
+    COMMAND platformio -c clion run "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_custom_target(
+    Debug ALL
+    COMMAND platformio -c clion run --target debug "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_executable(Z_DUMMY_TARGET ${SRC_LIST})

README.md

@@ -4,7 +4,7 @@ This is the device side code for the [meshtastic.org](https://www.meshtastic.org
 
 ![Continuous Integration](https://github.com/meshtastic/Meshtastic-esp32/workflows/Continuous%20Integration/badge.svg)
 
-Meshtastic™ is a project that lets you use
+Meshtastic® is a project that lets you use
 inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
 essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
 members and any text messages sent to your group chat.
@@ -30,11 +30,14 @@ We currently support three models of radios.
   - [T-Beam V0.7 w/ NEO-6M](https://www.aliexpress.com/item/4000574335430.html) (will work but **you must use the tbeam0.7 firmware ** - but the T-Beam V1.0 or later are better!)
      - board labels "TTGO T22_V07 20180711"
   - 3D printable cases
-    - [T-Beam V0](https://www.thingiverse.com/thing:3773717)
+    - [T-Beam V0](https://www.thingiverse.com/thing:3773717) (GPS and LoRa antenna misaligned if GPS placed as pictured)
     - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:3830711)
-    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297)
+    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:4677388) (Mounting option for larger GPS antenna but LoRa antenna enclosed)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297) (GPS and LoRa antenna misaligned if GPS placed as pictured)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4589651)
+    - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4619981) (GPS and LoRa antenna misaligned if GPS placed as pictured)
   - Laser-cut cases
-    - [T-Beam V1](https://www.thingiverse.com/thing:4552771)
+    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:4552771)
 
 - [TTGO LORA32](https://www.aliexpress.com/item/4000211331316.html) - No GPS
   - version 2.1
@@ -43,7 +46,10 @@ We currently support three models of radios.
     - [TTGO LORA32 v1](https://www.thingiverse.com/thing:3385109)
 
 - [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/) - No GPS
+  - [Official Heltec case](https://www.aliexpress.com/item/4001050707951.html)
   - [3D Printable case](https://www.thingiverse.com/thing:3125854)
+  
+Note: The GPS and LoRa stock antennas should be placed in a way, that the GPS antenna faces the sky and the LoRa antenna radiates 360 degrees horizontally. For better GPS reception you might want to [upgrade the GPS antenna](https://meshtastic.discourse.group/t/the-importance-of-gps-antennas-and-request-to-3d-case-documentation-people/1505) and to properly align the antennas you might want to upgrade to a LoRa antenna that can be adjusted to radiate into the right directions.
 
 **Make sure to get the frequency for your country**
 

bin/build-all.sh

@@ -2,18 +2,13 @@
 
 set -e
 
-source bin/version.sh
-
-COUNTRIES="US EU433 EU865 CN JP ANZ KR"
-#COUNTRIES=US
-#COUNTRIES=CN
+VERSION=`bin/buildinfo.py`
 
 BOARDS_ESP32="tlora-v2 tlora-v1 tlora-v2-1-1.6 tbeam heltec tbeam0.7"
+#BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine
 BOARDS_NRF52="lora-relay-v1"
-BOARDS="$BOARDS_ESP32 $BOARDS_NRF52"
-#BOARDS=tbeam
 
 OUTDIR=release/latest
 
@@ -22,22 +17,48 @@ ARCHIVEDIR=release/archive
 
 rm -f $OUTDIR/firmware*
 
-mkdir -p $OUTDIR/bins $OUTDIR/elfs
-rm -f $OUTDIR/bins/*
+mkdir -p $OUTDIR/bins $ARCHIVEDIR
+rm -r $OUTDIR/bins/*
+mkdir -p $OUTDIR/bins/universal $OUTDIR/elfs/universal
 
 # build the named environment and copy the bins to the release directory
-function do_build {
+function do_build() {
+	BOARD=$1
+	isNrf=$3
+	
     echo "Building for $BOARD with $PLATFORMIO_BUILD_FLAGS"
     rm -f .pio/build/$BOARD/firmware.*
 
     # The shell vars the build tool expects to find
-    export HW_VERSION="1.0-$COUNTRY"
     export APP_VERSION=$VERSION
-    export COUNTRY
 
-    pio run --jobs 4 --environment $BOARD # -v
+    # Are we building a universal/regionless rom?
+    export HW_VERSION="1.0"
+    basename=universal/firmware-$BOARD-$VERSION
+
+    pio run --environment $BOARD # -v
     SRCELF=.pio/build/$BOARD/firmware.elf
-    cp $SRCELF $OUTDIR/elfs/firmware-$BOARD-$COUNTRY-$VERSION.elf
+    cp $SRCELF $OUTDIR/elfs/$basename.elf
+
+    if [ "$isNrf" = "false" ]
+    then
+        echo "Copying ESP32 bin file"
+        SRCBIN=.pio/build/$BOARD/firmware.bin
+        cp $SRCBIN $OUTDIR/bins/$basename.bin
+    else
+        echo "Generating NRF52 uf2 file"
+        SRCHEX=.pio/build/$BOARD/firmware.hex
+        bin/uf2conv.py $SRCHEX -c -o $OUTDIR/bins/$basename.uf2 -f 0xADA52840
+    fi
+}
+
+function do_boards() {
+	declare boards=$1
+	declare isNrf=$2
+	for board in $boards; do
+		# Build universal
+		do_build $board "" "$isNrf" 
+	done
 }
 
 # Make sure our submodules are current
@@ -46,26 +67,20 @@ git submodule update
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
 platformio lib update 
 
-for COUNTRY in $COUNTRIES; do 
-    for BOARD in $BOARDS; do
-        do_build $BOARD
-    done
+do_boards "$BOARDS_ESP32" "false"
+do_boards "$BOARDS_NRF52" "true"
 
-    echo "Copying ESP32 bin files"
-    for BOARD in $BOARDS_ESP32; do
-        SRCBIN=.pio/build/$BOARD/firmware.bin
-        cp $SRCBIN $OUTDIR/bins/firmware-$BOARD-$COUNTRY-$VERSION.bin
-    done
-
-    echo "Generating NRF52 uf2 files"
-    for BOARD in $BOARDS_NRF52; do
-        SRCHEX=.pio/build/$BOARD/firmware.hex
-        bin/uf2conv.py $SRCHEX -c -o $OUTDIR/bins/firmware-$BOARD-$COUNTRY-$VERSION.uf2 -f 0xADA52840
-    done
-done
+echo "Building SPIFFS for ESP32 targets"
+pio run --environment tbeam -t buildfs
+cp .pio/build/tbeam/spiffs.bin $OUTDIR/bins/universal/spiffs-$VERSION.bin
 
 # keep the bins in archive also
-cp $OUTDIR/bins/firmware* $OUTDIR/elfs/firmware* $ARCHIVEDIR
+cp $OUTDIR/bins/universal/spiffs* $OUTDIR/bins/universal/firmware* $OUTDIR/elfs/universal/firmware* $ARCHIVEDIR
+
+echo Updating android bins $OUTDIR/forandroid
+rm -rf $OUTDIR/forandroid
+mkdir -p $OUTDIR/forandroid
+cp -a $OUTDIR/bins/universal/*.bin $OUTDIR/forandroid/
 
 cat >$OUTDIR/curfirmwareversion.xml <<XML
 <?xml version="1.0" encoding="utf-8"?>
@@ -75,11 +90,12 @@ release.  It is used by the android app for forcing software updates.  Do not ed
 Generated by bin/buildall.sh -->
 
 <resources>
-    <string name="cur_firmware_version">$VERSION</string>
+    <string name="cur_firmware_version" translatable="false">$VERSION</string>
 </resources>
 XML
 
+echo Generating $ARCHIVEDIR/firmware-$VERSION.zip
 rm -f $ARCHIVEDIR/firmware-$VERSION.zip
-zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $OUTDIR/bins/firmware-*-$VERSION.* images/system-info.bin bin/device-install.sh bin/device-update.sh
+zip --junk-paths $ARCHIVEDIR/firmware-$VERSION.zip $ARCHIVEDIR/spiffs-$VERSION.bin $OUTDIR/bins/universal/firmware-*-$VERSION.* images/system-info.bin bin/device-install.sh bin/device-update.sh
 
 echo BUILT ALL

bin/buildinfo.py

@@ -0,0 +1,11 @@
+#!/usr/bin/env python3
+import configparser
+
+config = configparser.RawConfigParser()
+config.read('version.properties')
+
+version = dict(config.items('VERSION'))
+
+verStr = "{}.{}.{}".format(version["major"], version["minor"], version["build"])
+
+print(f"{verStr}")

bin/device-install.sh

@@ -1,5 +1,7 @@
 #!/bin/sh
 
+set -e
+
 # Usage info
 show_help() {
 cat << EOF
@@ -36,6 +38,7 @@ if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	esptool.py --baud 921600 erase_flash
 	esptool.py --baud 921600 write_flash 0x1000 system-info.bin
+    esptool.py --baud 921600 write_flash 0x00390000 spiffs-*.bin
 	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
 else
 	echo "Invalid file: ${FILENAME}"

bin/device-update.sh

@@ -35,6 +35,8 @@ shift "$((OPTIND-1))"
 if [ -f "${FILENAME}" ]; then
 	echo "Trying to flash update ${FILENAME}."
 	esptool.py --baud 921600 write_flash 0x10000 ${FILENAME}
+	echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
+	esptool.py --baud 921600 erase_region 0xe000 0x2000
 else
 	echo "Invalid file: ${FILENAME}"
 	show_help

bin/exception_decoder.py

@@ -241,7 +241,7 @@ def print_addr(name, value, resolver):
 def print_stack_full(lines, resolver):
     print("stack:")
     for line in lines:
-        print(line.offset + ":")
+        print(str(line.offset) + ":")
         for content in line.content:
             print("  " + resolver.resolve_stack_addr(content))
 

bin/gen-images.sh

@@ -0,0 +1,19 @@
+
+
+set -e 
+
+# regen the design bins first
+cd design
+bin/generate-pngs.sh
+cd ..
+
+# assumes 50 wide, 28 high
+convert design/logo/png/Mesh_Logo_Black_Small.png -background white -alpha Background src/graphics/img/icon.xbm
+
+inkscape --batch-process -o images/compass.png -w 48 -h 48 images/location_searching-24px.svg
+convert compass.png -background white -alpha Background src/graphics/img/compass.xbm
+
+inkscape --batch-process -o images/face.png -w 13 -h 13 images/face-24px.svg
+
+inkscape --batch-process -o images/pin.png -w 13 -h 13 images/room-24px.svg
+convert pin.png -background white -alpha Background src/graphics/img/pin.xbm

bin/install-bootloader.sh

@@ -2,7 +2,20 @@
 
 set -e 
 
+# dependencies
+# apt install srecord
+
 BOOTDIR=/home/kevinh/development/meshtastic/Adafruit_nRF52_Bootloader
+BOARD=othernet_ppr1
+BOOTVER=0.3.2
+BOOTNUM=128
+BOOTSHA=gc01b9ea
+SDCODE=s113
+SDVER=7.2.0
+PROJ=ppr1
+
+# FIXME for nRF52840 use 0xff000, for nRF52833 use 0x7f000
+BOOTSET=0x7f000
 
 nrfjprog --eraseall -f nrf52
 
@@ -11,12 +24,12 @@ nrfjprog --eraseall -f nrf52
 # first 4 bytes should be 0x01 to indicate valid app image
 # second 4 bytes should be 0x00 to indicate no CRC required for image
 echo "01 00 00 00 00 00 00 00" | xxd -r -p - >/tmp/bootconf.bin
-srec_cat /tmp/bootconf.bin -binary -offset 0xff000 -output /tmp/bootconf.hex -intel   
+srec_cat /tmp/bootconf.bin -binary -offset $BOOTSET -output /tmp/bootconf.hex -intel   
 
-echo Generating merged hex file 
-mergehex -m $BOOTDIR/_build/build-ttgo_eink/ttgo_eink_bootloader-0.3.2-124-g69bd8eb-dirty_s140_6.1.1.hex .pio/build/eink/firmware.hex /tmp/bootconf.hex -o ttgo_eink_full.hex
+echo Generating merged hex file from .pio/build/$PROJ/firmware.hex
+mergehex -o ${BOARD}_full.hex -m $BOOTDIR/_build/build-$BOARD/${BOARD}_bootloader-$BOOTVER-$BOOTNUM-$BOOTSHA-dirty_${SDCODE}_$SDVER.hex .pio/build/$PROJ/firmware.hex /tmp/bootconf.hex
 
 echo Telling bootloader app region is valid and telling CPU to run
-nrfjprog --program ttgo_eink_full.hex -f nrf52 --reset
+nrfjprog --program ${BOARD}_full.hex -f nrf52 --reset
 
 # nrfjprog --readuicr /tmp/uicr.hex; objdump -s /tmp/uicr.hex | less

bin/install-eink.sh

@@ -0,0 +1,24 @@
+# You probably don't want to use this script, it programs a custom bootloader build onto a nrf52 board
+
+set -e 
+
+BOOTDIR=/home/kevinh/development/meshtastic/Adafruit_nRF52_Bootloader
+
+nrfjprog --eraseall -f nrf52
+
+# to get tool run "sudo apt-get install srecord"
+
+# this generates an intel hex file that can be programmed into a NRF52 to tell the adafruit bootloader that the current app image is valid
+# Bootloader settings are at BOOTLOADER_SETTINGS (rw) : ORIGIN = 0xFF000, LENGTH = 0x1000
+# first 4 bytes should be 0x01 to indicate valid app image
+# second 4 bytes should be 0x00 to indicate no CRC required for image
+echo "01 00 00 00 00 00 00 00" | xxd -r -p - >/tmp/bootconf.bin
+srec_cat /tmp/bootconf.bin -binary -offset 0xff000 -output /tmp/bootconf.hex -intel   
+
+echo Generating merged hex file 
+mergehex -m $BOOTDIR/_build/build-ttgo_eink/ttgo_eink_bootloader-0.3.2-213-gf67f592-dirty_s140_6.1.1.hex .pio/build/eink/firmware.hex /tmp/bootconf.hex -o ttgo_eink_full.hex
+
+echo Telling bootloader app region is valid and telling CPU to run
+nrfjprog --program ttgo_eink_full.hex -f nrf52 --reset
+
+# nrfjprog --readuicr /tmp/uicr.hex; objdump -s /tmp/uicr.hex | less

bin/native-gdbserver.sh

@@ -0,0 +1,3 @@
+set -e
+pio run --environment native
+gdbserver --once localhost:2345 .pio/build/native/program

bin/native-run.sh

@@ -0,0 +1,3 @@
+set -e
+pio run --environment native
+.pio/build/native/program

bin/nrf52832-gdbserver.sh

@@ -1,3 +1,3 @@
 
 
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA
+JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52832_XXAA

bin/nrf52833-gdbserver.sh

@@ -0,0 +1,3 @@
+
+
+JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52833_XXAA

bin/nrf52840-gdbserver.sh

@@ -1,3 +1,3 @@
 
 
-JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52832_XXAA
+JLinkGDBServerCLExe -if SWD -select USB -port 2331 -device NRF52840_XXAA -SuppressInfoUpdateFW -DisableAutoUpdateFW -rtos GDBServer/RTOSPlugin_FreeRTOS

bin/platformio-custom.py

@@ -0,0 +1,16 @@
+
+Import("projenv")
+
+import configparser
+prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
+config = configparser.RawConfigParser()
+config.read(prefsLoc)
+version = dict(config.items('VERSION'))
+verStr = "{}.{}.{}".format(version["major"], version["minor"], version["build"])
+
+print("Using meshtastic platform-custom.py, firmare version " + verStr)
+
+# General options that are passed to the C and C++ compilers
+projenv.Append(CCFLAGS=[
+    "-DAPP_VERSION=" + verStr
+    ])

bin/program-1.0-tbeam.sh

@@ -0,0 +1,3 @@
+esptool.py --baud 921600 write_flash 0x10000 release/archive/old/firmware-tbeam-EU865-1.0.0.bin
+echo "Erasing the otadata partition, which will turn off flash flippy-flop and force the first image to be used"
+esptool.py --baud 921600 erase_region 0xe000 0x2000

bin/program-1.1-tbeam.sh

@@ -0,0 +1 @@
+esptool.py --baud 921600 write_flash 0x10000 release/archive/old/firmware-tbeam-1.1.50.bin

bin/program-release-tbeam.sh

@@ -1,6 +1,8 @@
 
 set -e
 
-source bin/version.sh
+VERSION=`bin/buildinfo.py`
+FILENAME=release/latest/bins/universal/firmware-tbeam-$VERSION.bin
 
-esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/firmware-tbeam-US-$VERSION.bin
+echo Installing $FILENAME
+esptool.py --baud 921600 write_flash 0x10000 $FILENAME

bin/program-release-universal.sh

@@ -0,0 +1,6 @@
+
+set -e
+
+source bin/version.sh
+
+esptool.py --baud 921600 write_flash 0x10000 release/latest/bins/universal/firmware-tbeam-$VERSION.bin

bin/qspi-flash-test.sh

@@ -1,6 +1,6 @@
 # You probably don't need this - it is a basic test of the serial flash on the TTGO eink board
 
-nrfjprog -qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
+nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --memwr 0x12000000 --val 0xdeadbeef --verify
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --readqspi spi.hex
 objdump -s spi.hex | less

bin/regen-protos.sh

@@ -1,6 +1,15 @@
 #!/bin/bash
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.1"
+set -e
+
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.4 to be located in the"
+echo "meshtastic-device root directory if the following step fails, you should download the correct"
+echo "prebuilt binaries for your computer into nanopb-0.4.4"
+
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd proto
-../../nanopb-0.4.1-linux-x86/generator-bin/protoc --nanopb_out=-v:../src/mesh -I=../proto mesh.proto
+../nanopb-0.4.4/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated -I=../proto *.proto
+
+echo "Regenerating protobuf documentation - if you see an error message"
+echo "you can ignore it unless doing a new protobuf release to github."
+bin/regen-docs.sh

bin/run-both.sh

@@ -0,0 +1,11 @@
+set -e 
+
+pio run
+
+echo uploading to usb1
+pio run --upload-port /dev/ttyUSB1 -t upload &
+
+echo uploading to usb0
+pio run --upload-port /dev/ttyUSB0 -t upload &
+
+wait

bin/upload-to-bootloader.sh

@@ -1,4 +1,4 @@
 
 echo "Converting to uf2 for NRF52 Adafruit bootloader"
-bin/uf2conv.py .pio/build/lora-relay-v1/firmware.hex -f 0xADA52840
+bin/uf2conv.py .pio/build/lora-relay-v2/firmware.hex -f 0xADA52840
 # cp flash.uf2 /media/kevinh/FTH*BOOT/

bin/version.sh

@@ -1,3 +0,0 @@
-
-
-export VERSION=1.1.5

bin/view-map.sh

@@ -0,0 +1,2 @@
+echo using amap tool to display memory map
+amap .pio/build/output.map

boards/eink.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       [

boards/eink0.1.json

@@ -0,0 +1,61 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      [
+        "0x239A",
+        "0x4405"
+      ]
+    ],
+    "usb_product": "TTGO_eink",
+    "mcu": "nrf52840",
+    "variant": "eink0.1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": [
+    "bluetooth"
+  ],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": [
+      "jlink"
+    ],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": [
+    "arduino"
+  ],
+  "name": "TTGO eink (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "stlink"
+    ]
+  },
+  "url": "FIXME",
+  "vendor": "TTGO"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/nrf52840_dk_modified.json

@@ -1,7 +1,7 @@
 {
   "build": {
     "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
+      "ldscript": "nrf52840_s113_v7.ld"
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
@@ -16,9 +16,9 @@
       "name": "adafruit"
     },
     "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
       "sd_fwid": "0x00B6"
     },
     "bootloader": {

boards/ppr1.json

@@ -0,0 +1,46 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

data/static/basic.js

@@ -0,0 +1,43 @@
+var meshtasticClient;
+var connectionOne;
+
+
+// Important: the connect action must be called from a user interaction (e.g. button press), otherwise the browsers won't allow the connect
+function connect() {
+
+    // Create new connection
+    var httpconn = new meshtasticjs.IHTTPConnection();
+
+    // Set connection params
+    let sslActive;
+    if (window.location.protocol === 'https:') {
+        sslActive = true;
+    } else {
+        sslActive = false;
+    }
+    let deviceIp = window.location.hostname; // Your devices IP here
+
+
+    // Add event listeners that get called when a new packet is received / state of device changes
+    httpconn.addEventListener('fromRadio', function (packet) { console.log(packet) });
+
+    // Connect to the device async, then send a text message
+    httpconn.connect(deviceIp, sslActive)
+        .then(result => {
+
+            alert('device has been configured')
+            // This gets called when the connection has been established
+            // -> send a message over the mesh network. If no recipient node is provided, it gets sent as a broadcast
+            return httpconn.sendText('meshtastic is awesome');
+
+        })
+        .then(result => {
+
+            // This gets called when the message has been sucessfully sent
+            console.log('Message sent!');
+        })
+
+        .catch(error => { console.log(error); });
+
+}
+

data/static/index.html

@@ -0,0 +1,18 @@
+<!doctype html>
+<html class="no-js" lang="">
+
+<head>
+  <meta charset="utf-8">
+  <title></title>
+
+  <script src="/static/meshtastic.js"></script>
+  <script src="/static/basic.js"></script>
+</head>
+
+<body>
+
+  <button id="connect_button" onclick="connect()">Connect to Meshtastic device</button>
+ 
+</body>
+
+</html>

docs/README.md

@@ -1,13 +1,13 @@
 # What is Meshtastic?
 
-Meshtastic™ is a project that lets you use
+Meshtastic® is a project that lets you use
 inexpensive (\$30 ish) GPS radios as an extensible, long battery life, secure, mesh GPS communicator. These radios are great for hiking, skiing, paragliding - essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other members and any text messages sent to your group chat.
 
 The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios will optionally work with your phone, but no phone is required.
 
 Note: Questions after reading this? See our new [forum](https://meshtastic.discourse.group/).
 
-### Uses
+## Uses
 
 - Outdoor sports where cellular coverage is limited. (Hiking, Skiing, Boating, Paragliding, Gliders etc..)
 - Applications where closed source GPS communicators just won't cut it (it is easy to add features for glider pilots etc...)
@@ -17,7 +17,7 @@ Note: Questions after reading this? See our new [forum](https://meshtastic.disco
 
 [![Youtube video demo](desk-video-screenshot.png)](https://www.youtube.com/watch?v=WlNbMbVZlHI "Meshtastic early demo")
 
-### Features
+## Features
 
 Not all of these features are fully implemented yet - see **important** disclaimers below. But they should be in by the time we decide to call this project beta (three months?)
 
@@ -39,6 +39,11 @@ This software is 100% open source and developed by a group of hobbyist experimen
 
 For an detailed walk-through aimed at beginners, we recommend [meshtastic.letstalkthis.com](https://meshtastic.letstalkthis.com/).
 
+### Related Groups
+
+Telegram group for **Italy**-based users [t.me/meshtastic_italia](http://t.me/meshtastic_italia) (Italian language, unofficial).<br/>
+Telegram group for **Russian**-based users [t.me/meshtastic_russia](https://t.me/meshtastic_russia) (Russian language, unofficial).
+
 # Updates
 
 Note: Updates are happening almost daily, only major updates are listed below. For more details see our forum.

docs/radio-settings.md

@@ -2,13 +2,13 @@
 
 We use the same channel maps as LoRaWAN (though this is not LoRaWAN).
 
-![freq table](images/LoRa-Frequency-Bands.jpg)
+![freq table](/images/LoRa-Frequency-Bands.jpg)
 
 See [this site](https://www.rfwireless-world.com/Tutorials/LoRa-channels-list.html) for more information.
 
 ## LoRaWAN Europe Frequency Band
 
-The maximum power allowed is +14dBM.
+The maximum power allowed is +14dBm ERP (Effective Radiated Power, see [this site](https://en.wikipedia.org/wiki/Effective_radiated_power) for more information).
 
 ### 433 MHz
 
@@ -24,7 +24,82 @@ Channel zero starts at 865.20 MHz
 
 LoRaWAN defines 64, 125 kHz channels from 902.3 to 914.9 MHz increments.
 
-The maximum output power for North America is +30 dBM.
+The maximum output power for North America is +30 dBm ERP.
 
 The band is from 902 to 928 MHz. It mentions channel number and its respective channel frequency. All the 13 channels are separated by 2.16 MHz with respect to the adjacent channels.  
-Channel zero starts at 903.08 MHz center frequency.
+Channel zero starts at 903.08 MHz center frequency.
+
+## Data-rates
+
+### About
+
+Various data-rates are selectable when configuring a channel and are inversely proportional to the theoretical range of the devices.
+
+Considerations:
+
+* Spreading Factor - How much we "spread" our data over time.
+* * Each step up in Spreading Factor dobules the airtime to transmit.
+* * Each step up in Spreading Factor adds about 2.5db extra link budget.
+* Bandwidth - How big of a slice of the spectrum we use.
+* * Each doubling of the bandwidth is almost 3db less link budget.
+* * Bandwidths less than 31 may be unstable unless you have a high quality Crystal Ossilator.
+* Coding Rate - How much redundency we encode to resist noise.
+* * Increasing coding rate increases reliability while decrasing data-rate.
+* * 4/5 - 1.25x overhead
+* * 4/6 - 1.5x overhead
+* * 4/7 - 1.75x overhead
+* * 4/8 - 2x overhead
+
+
+### Pre-Defined
+
+We have four predefined channels. These are the most common settings and have been proven to work well:
+
+| Channel setting            | Alt Channel Name | Data-rate            | SF / Symbols | Coding Rate | Bandwidth | Link Budget |
+|:---------------------------|:-----------------|:---------------------|:-------------|:------------|:----------|:------------|
+| Short range (but fast)     | Short Fast       | 21.875 kbps          | 7 / 128      | 4/5         | 125       | 134dB       |
+| Medium range (but fast)    | Medium           | 5.469 kbps           | 7 / 128      | 4/5         | 500       | 140dB       |
+| Long range (but slower)    | Long Alt         | 0.275 kbps           | 9 / 512      | 4/8         | 31        | 153dB       |
+| Very long range (but slow) | Long Slow        | 0.183 kbps (default) | 12 / 4096    | 4/8         | 125       | 154dB       |
+
+The link budget used by these calculations assumes a transmit power of 17dBm and an antenna with 0dB gain. Adjust your link budget assumptions based on your actual devices.
+
+### Custom Settings
+
+You may want to select other channels for your usage. The other settings can be set by using the Python API.
+
+> meshtastic --setchan spread_factor 10 --setchan coding_rate 8 --setchan bandwidth 125
+
+After applying the settings, you will need to restart the device. After your device is restarted, it will generate a new crypto key and you will need to share the newly generated QR Code or URL to all your other devices.
+
+Some example settings:
+
+| Data-rate            | SF / Symbols | Coding Rate | Bandwidth | Link Budget | Note |
+|:---------------------|:-------------|:------------|:----------|:------------|:-----|
+| 37.50 kbps           | 6 / 64       | 4/5         | 500       | 129dB       | Fastest possible speed |
+| 3.125 kbps           | 8 / 256      | 4/5         | 125       | 143dB       | |
+| 1.953 kbps           | 8 / 256      | 4/8         | 125       | 143dB       | |
+| 1.343 kbps           | 11 / 2048    | 4/8         | 500       | 145dB       | | 
+| 1.099 kbps           | 9 / 512      | 4/8         | 125       | 146dB       | |
+| 0.814 kbps           | 10 / 1024    | 4/6         | 125       | 149dB       | |
+| 0.610 kbps           | 10 / 1024    | 4/8         | 125       | 149dB       | |
+| 0.488 kbps           | 11 / 2048    | 4/6         | 125       | 152dB       | |
+| 0.336 kbps           | 11 / 2048    | 4/8         | 125       | 152dB       | |
+| 0.073 kbps           | 12 / 4096    | 4/5         | 31        | 160dB       | Twice the range and/or coverage of "Long Slow", low resliance to noise |
+| 0.046 kbps           | 12 / 4096    | 4/8         | 31        | 160dB       | Twice the range and/or coverage of "Long Slow", high resliance to noise |
+
+The link budget used by these calculations assumes a transmit power of 17dBm and an antenna with 0dB gain. Adjust your link budget assumptions based on your actual devices.
+
+These channel settings may have not been tested. Use at your own discression. Share on https://meshtastic.discourse.group with your successes or failure.
+
+## Cryptography
+
+The preshared key used by the devices can be modified.
+
+* 0 = No crypto
+* 1 = Default channel key
+* 2 - 10 = The default channel key, except with 1 through 9 added to the last byte
+
+Use of cryptography can also be modified. To disable cryptography (maybe useful if you have HAM radio license):
+
+> meshtastic --setchan psk 0

docs/software/TODO.md

@@ -2,31 +2,243 @@
 
 You probably don't care about this section - skip to the next one.
 
-Threading tasks:
+## before next release
 
-- Use https://github.com/ivanseidel/ArduinoThread? rather than full coroutines 
-- clean up main loop()
-- check that we are mostly asleep, show which thread is causing us to wake
-- 
-- use tickless idle on nrf52, and sleep X msec or until an interrupt occurs or the cooperative scheduling changes. https://devzone.nordicsemi.com/f/nordic-q-a/12363/nrf52-freertos-power-consumption-tickless-idle
-- BAD IDEA: use vTaskDelay and https://www.freertos.org/xTaskAbortDelay.html if scheduling changes. (define INCLUDE_xTaskAbortDelay on ESP32 and NRF52 - seems impossible to find?)
-- GOOD IDEA: use xSemaphoreTake to take a semaphore using a timeout.  Expect semaphore to not be set, but set it to indicate scheduling has changed.
+* DONE timestamps on oled screen are wrong - don't seem to be updating based on message rx (actually: this is expected behavior when no node on the mesh has GPS time)
+* DONE add ch-del
+* DONE channel hash suffixes are wrong on android
+* DONE before next relase: test empty channel sets on android
+* DONE channel sharing in android
+* DONE test 1.0 firmware update on android
+* DONE test 1.1 firmware update on android
+* test 1.2.10 firmware update on android
+* DONE test link sharing on android
+* luxon bug report - seeing rx acks for nodes that are not on the network
+* document how to do remote admin
+* release py, android, device
+  
+## 1.2 cleanup & multichannel support:
 
-Nimble tasks:
+* DONE cleanup the external notification and serial plugins
+* non ack version of stress test fails sometimes!
 
-- readerror.txt stress test bug
-- started RPA long test, jul 22 6pm
-- implement nimble software update api
-- update to latest bins, test OTA again (measure times) and then checkin bins
-- do alpha release
+* tx fault test has a bug #734
+* DONE move device types into an enum in nodeinfo
+* fix android to use new device types for firmware update
+  
+* cdcacm bug on nrf52: emittx thinks it emitted but client sees nothing.  works again later
+* nrf52: segger logs have errors in formatting that should be impossible (because not going through serial, try stalling on segger)
+* DONE call RouterPlugin for *all* packets - not just Router packets
+* DONE generate channel hash from the name of the channel+the psk (not just one or the other)
+* DONE send a hint that can be used to select which channel to try and hash against with each message
+* DONE remove deprecated
+* DONE fix setchannel in phoneapi.cpp
+* DONE set mynodeinfo.max_channels
+* DONE set mynodeinfo.num_bands (formerly num_channels)
+* DONE fix sniffing of non Routing packets
+* DONE enable remote setttings access by moving settings operations into a regular plugin (move settings ops out of PhoneAPI)
+* DONE move portnum up?
+* DONE remove region specific builds from the firmware
+* DONE test single channel without python
+* DONE Use "default" for name if name is empty
+* DONE fix python data packet receiving (nothing showing in log?)
+* DONE implement 'get channels' Admin plugin operation
+* DONE use get-channels from python
+* DONE use get channels & get settings from android
+* DONE use set-channel from python
+* DONE make settings changes from python work
+* DONE pthon should stop fetching channels once we've reached our first empty channel definition (hasSettings == true)
+* DONE add check for old devices with new API library
+* DONE release python api
+* DONE release protobufs
+* DONE release to developers
+* DONE fix setch-fast in python tool
+* turn off fault 8: https://github.com/meshtastic/Meshtastic-device/issues/734
+* age out pendingrequests in the python API
+* DONE stress test channel download from python, sometimes it seems like we don't get all replies, bug was due to simultaneous android connection
+* DONE combine acks and responses in a single message if possible (do routing plugin LAST and drop ACK if someone else has already replied)
+* DONE don't send packets we received from the phone BACK TOWARDS THE PHONE (possibly use fromnode 0 for packets the phone sends?)
+* fix 1.1.50 android debug panel display
+* DONE test android channel setting
+* DONE release to users
+* DONE warn in android app about unset regions
+* DONE use set-channel from android
+* DONE add gui in android app for setting region
+* DONE clean up python channel usage
+* DONE use bindToChannel to limit admin access for remote nodes
+* DONE move channels and radio config out of device settings
+* test remote info and remote settings changes
+* make python tests more exhaustive
+* pick default random admin key
+* exclude admin channels from URL?
+* make a way to share just secondary channels via URL
+* use single byte 'well known' channel names for the four default channel names (longslow etc), and for admin, gpio, etc...
+* use presence of gpio channel to enable gpio ops, same for serial etc...
+* restrict gpio & serial & settings operations to the admin channel (unless local to the current node)
+* add channel restrictions for plugins (and restrict routing plugin to the "control" channel)
+* stress test multi channel
+* investigate @mc-hamster report of heap corruption
+* DONE use set-user from android
+* generalize the concept of "shortstrings" use it for both PSKs and well known channel names.  Possibly use a ShortString class.
+* use portuino TCP connection to debug with python API
+* document the relationship between want_response (indicating remote node received it) and want_ack (indicating that this message should be sent reliably - and also get acks from the first rx node and naks if it is never delivered)
+* DONE android should stop fetching channels once we've reached our first empty channel definition (hasSettings == true)
+* DONE warn in python api if we are too new to talk to the device code
+* DONE make a post warning about 1.2, telling how to stay on old android & python clients.  link to this from the android dialog message and python version warning.
+* DONE "FIXME - move the radioconfig/user/channel READ operations into SettingsMessage as well"
+* DONE scrub protobufs to make sure they are absoloute minimum wiresize (in particular Data, ChannelSets and positions)
+* DONE change syncword (now ox2b)
+* allow chaning packets in single transmission - to increase airtime efficiency and amortize packet overhead
+* DONE move most parts of meshpacket into the Data packet, so that we can chain multiple Data for sending when they all have a common destination and key.
+* when selecting a MeshPacket for transmit, scan the TX queue for any Data packets we can merge together as a WirePayload.  In the low level send/rx code expand that into multiple MeshPackets as needed (thus 'hiding' from MeshPacket that over the wire we send multiple datapackets
+* confirm we are still calling the plugins for messages inbound from the phone (or generated locally)
+* confirm we are still multi hop routing flood broadcasts
+* confirm we are still doing resends on unicast reliable packets
+* add history to routed packets: https://meshtastic.discourse.group/t/packet-source-tracking/2764/2
+* add support for full DSR unicast delivery
+* DONE move acks into routing
+* DONE make all subpackets different versions of data
+* DONE move routing control into a data packet
+* have phoneapi done via plugin (will allow multiple simultaneous API clients - stop disabling BLE while using phone API)
+* DONE figure out how to add micro_delta to position, make it so that phone apps don't need to understand it?
+* only send battery updates a max of once a minute
+* add python channel selection for sending
+* DONE record recevied channel in meshpacket
+* test remote settings operations (confirm it works 3 hops away)
+* DONE make a primaryChannel global and properly maintain it when the phone sends setChannel
+* DONE move setCrypto call into packet send and packet decode code
+* implement 'small location diffs' change
+* move battery level out of position? 
+* consider "A special exception (FIXME, not sure if this is a good idea) - packets that arrive on the local interface 
+  are allowed on any channel (this lets the local user do anything)."  Probably by adding a "secure_local_interface" settings bool.
+* DOUBLE CHECK android app can still upgrade 1.1 and 1.0 loads
+ 
+eink:
+
+* DONE check email of reported issues
+* DONE turn off vbus driving (in bootloader)
+* new battery level sensing
+* current draw no good
+* DONE: fix backlight
+* DONE - USB is busted because of power enable mode?
+* test CPU voltage? something is bad with RAM (removing eink module does not help)
+* test that board leaves bootloader always
+* test USB - works in bootloader
+* test LEDs
+* Test BME280
+* test gps
+* check GPS fast locking
+* tested! dlora
+* test eink backlight
+* tested! eink
+* test buttons
+* test battery charging
+* test serial flash
+* send updated app and bootloader image
+* OHH BME280!  THAT IS GREAT!
+* make new screen work, ask for datasheet
+* say I think you could ship this
+* leds seem busted
+* fix hw_model: "nrf52unknown"
+* use larger icon for meshtastic logo
+* send email about variants & faster flash programming - https://github.com/geeksville/Meshtastic-esp32/commit/f110225173a77326aac029321cdb6491bfa640f6
+* send PR for bootloader
+* fix nrf52 time/date
+* send new master bin file
+* send email about low power mode problems
+* support new flash chip in appload, possibly use low power mode
+* swbug! stuck busy tx occurred!
+  
+For app cleanup:
+
+* use structured logging to kep logs in ram.  Also send logs as packets to api clients
+* DONE writeup nice python options docs (common cases, link to protobuf docs)
+* have android app link to user manual
+* DONE only do wantReplies once per packet type, if we change network settings force it again
+* update positions and nodeinfos based on packets we just merely witness on the mesh.  via isPromsciousPort bool, remove sniffing
+* DONE make device build always have a valid version
+* DONE do fixed position bug https://github.com/meshtastic/Meshtastic-device/issues/536
+* DONE check build guide
+* DONE write devapi user guide
+* DONE update android code: https://developer.android.com/topic/libraries/view-binding/migration
+* DONE test GPIO watch
+* DONE set --set-chan-fast, --set-chan-default
+* writeup docs on gpio 
+* DONE make python ping command
+* DONE make hello world example service
+* DONE have python tool check max packet size before sending to device
+* DONE if request was sent reliably, send reply reliably
+* DONE require a recent python api to talk to these new device loads
+* DONE require a recent android app to talk to these new device loads
+* DONE fix handleIncomingPosition
+* DONE move want_replies handling into plugins
+* DONE on android for received positions handle either old or new positions / user messages
+* DONE on android side send old or new positions as needed / user messages
+* DONE test python side handle new position/user messages
+* DONE make a gpio example. --gpiowrb 4 1, --gpiord 0x444, --gpiowatch 0x3ff
+* DONE fix position sending to use new plugin
+* DONE Add SinglePortNumPlugin - as the new most useful baseclass
+* DONE move positions into regular data packets (use new app framework)
+* DONE move user info into regular data packets (use new app framework)
+* DONE test that positions, text messages and user info still work
+* DONE test that position, text messages and user info work properly with new android app and old device code
+* DONE do UDP tunnel
+* DONE fix the RTC drift bug
+* move python ping functionality into device, reply with rxsnr info
+* use channels for gpio security https://github.com/meshtastic/Meshtastic-device/issues/104
+* MeshPackets for sending should be reference counted so that API clients would have the option of checking sent status (would allow removing the nasty 30 sec timer in gpio watch sending)
+
+For high speed/lots of devices/short range tasks:
+
+- When guessing numhops for sending: if I've heard from many local (0 hop neighbors) decrease hopcount by 2 rather than 1. 
+This should nicely help 'router' nodes do the right thing when long range, or if there are many local nodes for short range.
+- fix timeouts/delays to be based on packet length at current radio settings
 
-* update protocol description per cyclomies email thread
 * update faq with antennas https://meshtastic.discourse.group/t/range-test-ideas-requested/738/2
 * update faq on recommended android version and phones
 * add help link inside the app, reference a page on the wiki
 * turn on amazon reviews support
 * add a tablet layout (with map next to messages) in the android app
 
+# Old docs to merge
+
+MESH RADIO PROTOCOL
+
+Old TODO notes on the mesh radio protocol, merge into real docs someday...
+
+for each named group we have a pre-shared key known by all group members and
+wrapped around the device. you can only be in one group at a time (FIXME?!) To
+join the group we read a qr code with the preshared key and ParamsCodeEnum. that
+gets sent via bluetooth to the device.  ParamsCodeEnum maps to a set of various
+radio params (regulatory region, center freq, SF, bandwidth, bitrate, power
+etc...) so all members of the mesh can have their radios set the same way.
+
+once in that group, we can talk between 254 node numbers.
+to get our node number (and announce our presence in the channel) we pick a
+random node number and broadcast as that node with WANT-NODENUM(my globally
+unique name).  If anyone on the channel has seen someone _else_ using that name
+within the last 24 hrs(?) they reply with DENY-NODENUM. Note: we might receive
+multiple denies.  Note: this allows others to speak up for some other node that
+might be saving battery right now. Any time we hear from another node (for any
+message type), we add that node number to the unpickable list.  To dramatically
+decrease the odds a node number we request is already used by someone. If no one
+denies within TBD seconds, we assume that we have that node number.  As long as
+we keep talking to folks at least once every 24 hrs, others should remember we
+have it.
+
+Once we have a node number we can broadcast POSITION-UPDATE(my globally unique
+name, lat, lon, alt, amt battery remaining).  All receivers will use this to a)
+update the mapping of who is at what node nums, b) the time of last rx, c)
+position.  If we haven't heard from that node in a while we reply to that node
+(only) with our current POSITION_UPDATE state - so that node (presumably just
+rejoined the network) can build a map of all participants.
+
+We will periodically broadcast POSITION-UPDATE as needed based on distance moved
+or a periodic minimum heartbeat.
+
+If user wants to send a text they can SEND_TEXT(dest user, short text message).
+Dest user is a node number, or 0xff for broadcast.
+
 # Medium priority
 
 Items to complete before 1.0.

docs/software/android-too-old.md

@@ -0,0 +1,13 @@
+# Your android application needs updating
+
+Hi.
+
+If you've landed here that means your android application is too old for the running device firmware.  Usually our updates are backwards compatible, but in this special circumstance it is not.  Sorry.
+
+Probably, what this means is that you installed the **alpha test** version of the firmware from github.  We really love people helping with development by running the alpha test binaries.  But if you aren't ready to sign up for that right now, please go back to [github](https://github.com/meshtastic/Meshtastic-device/releases) and install the latest **not alpha** 1.1.x firmware.
+
+If you **do** intend to run the alpha test please [opt-in](https://play.google.com/apps/testing/com.geeksville.mesh) to receive the alpha test version of the android application.
+
+If you are willing to be an alpha tester, please keep an eye on our forum where we post frequent release notes.  We also will actively help you with any bugs you might encounter (along our shared journey of new feature goodness).
+
+If you have problems/questions please post in our [forum](https://meshtastic.discourse.group) and some nice person will probably help.

docs/software/build-instructions.md

@@ -1,8 +1,11 @@
 # Build instructions
 
-This project uses the simple PlatformIO build system. PlatformIO is an extension to Microsoft VSCode.
+This project uses the simple PlatformIO build system. PlatformIO is an extension to Microsoft VSCode.  Workflows from building from the GUI or from the commandline are listed below.  
+
+If you encounter any problems, please post a question in [our forum](meshtastic.discourse.group).  And when you learn a fix, update these instructions for the next person (i.e. edit this file and send in a [pull-request](https://opensource.com/article/19/7/create-pull-request-github) which we will eagerly merge).
 
 ## GUI
+
 1. Purchase a suitable [radio](https://github.com/meshtastic/Meshtastic-device/wiki/Hardware-Information).
 2. Install [Python](https://www.python.org/downloads/).
 3. Install [Git](https://git-scm.com/downloads).
@@ -19,6 +22,7 @@ This project uses the simple PlatformIO build system. PlatformIO is an extension
 Note - To get a clean build you may have to delete the auto-generated file `./.vscode/c_cpp_properties.json`, close and re-open Visual Studio and WAIT until the file is auto-generated before compiling again.
 
 ## Command Line
+
 1. Purchase a suitable [radio](https://github.com/meshtastic/Meshtastic-device/wiki/Hardware-Information).
 2. Install [PlatformIO](https://platformio.org/platformio-ide)
 3. Download this git repo and cd into it:
@@ -35,9 +39,20 @@ cd Meshtastic-device
 
 ## Decoding stack traces
 
+### Option 1
+
 If you get a crash, you can decode the addresses from the `Backtrace:` line:
 
 1. Save the `Backtrace: 0x....` line to a file, e.g., `backtrace.txt`.
 2. Run `bin/exception_decoder.py backtrace.txt` (this uses symbols from the
    last `firmware.elf`, so you must be running the same binary that's still in
    your `.pio/build` directory).
+
+### Option 2
+
+You can run the exception decoder to monitor the serial output and decode backtraces in real time.
+
+1. From within PlatformIO, open a new terminal.
+2. At the the terminal, enter:
+   `pio device monitor --port /dev/cu.SLAB_USBtoUART -f esp32_exception_decoder`
+   Replace the value of port with the location of your serial port.

docs/software/crypto.md

@@ -13,7 +13,7 @@ the project developers are not cryptography experts. Therefore we ask two things
 Based on comments from reviewers (see below), here's some tips for usage of these radios.  So you can know the level of protection offered:
 
 * It is pretty likely that the AES256 security is implemented 'correctly' and an observer will not be able to decode your messages.
-* Warning: If an attacker is able to get one of the radios in their position, they could either a) extract the channel key from that device or b) use that radio to listen to new communications.
+* Warning: If an attacker is able to get one of the radios in their posession, they could either a) extract the channel key from that device or b) use that radio to listen to new communications.
 * Warning: If an attacker is able to get the "Channel QR code/URL" that you share with others - that attacker could then be able to read any messages sent on the channel (either tomorrow or in the past - if they kept a raw copy of those broadcast packets)
 
 Possible future areas of work (if there is enough interest - post in our [forum](https://meshtastic.discourse.group) if you want this):
@@ -48,4 +48,4 @@ I'm assuming that meshtastic is being used to hike in places where someone capab
 * I think the bigger encryption question is "what does the encryption need to do"? As it stands, an attacker who has yet to capture any of the devices cannot reasonably capture text or location data. An attacker who captures any device in the channel/mesh can read everything going to that device, everything stored on that device, and any other communication within the channel that they captured in encrypted form. If that capability basically matches your expectations, it is suitable for whatever adventures this was intended for, then, based on information publicly available or widely disclosed, the encryption is good. If those properties are distressing (like, device history is deliberately limited and you don't want a device captured today to endanger the information sent over the channel yesterday) we could talk about ways to achieve that (most likely synchronizing time and replacing the key with its own SHA256 every X hours, and ensuring the old key is not retained unnecessarily).
 * Two other things to keep in mind are that AES-CTR does not itself provide authenticity (e.g. an attacker can flip bits in replaying data and scramble the resulting plaintext), and that the current scheme gives some hints about transmission in the size. So, if you worry about an adversary deliberately messing-up messages or knowing the length of a text message, it looks like those might be possible.
 
-I'm guessing that the network behaves somewhat like a store-and-forward network - or, at least, that the goal is to avoid establishing a two-way connection to transmit data. I'm afraid I haven't worked with mesh networks much, but remember studying them briefly in school about ten years ago.
+I'm guessing that the network behaves somewhat like a store-and-forward network - or, at least, that the goal is to avoid establishing a two-way connection to transmit data. I'm afraid I haven't worked with mesh networks much, but remember studying them briefly in school about ten years ago.

docs/software/device-api.md

@@ -1,4 +1,6 @@
-# Device API
+# Bluetooth/serial/TCP protocol API
+
+(This document describes the protocol for external API clients using our devices.  If you are interested in running your own code on the device itself, see the [on-device](plugin-api.md) documentation instead)
 
 The Device API is design to have only a simple stream of ToRadio and FromRadio packets and all polymorphism comes from the flexible set of Google Protocol Buffers which are sent over the wire. We use protocol buffers extensively both for the bluetooth API and for packets inside the mesh or when providing packets to other applications on the phone.
 
@@ -111,6 +113,7 @@ Characteristics
 | e272ebac-d463-4b98-bc84-5cc1a39ee517 | write       | data, variable sized, recommended 512 bytes, write one for each block of file                                     |
 | 4826129c-c22a-43a3-b066-ce8f0d5bacc6 | write       | crc32, write last - writing this will complete the OTA operation, now you can read result                         |
 | 5e134862-7411-4424-ac4a-210937432c77 | read,notify | result code, readable but will notify when the OTA operation completes                                            |
+| 5e134862-7411-4424-ac4a-210937432c67 | write | sets the region for programming, currently only 0 (app) or 100 (spiffs) are defined, if not set app is assumed |
 | GATT_UUID_SW_VERSION_STR/0x2a28      | read        | We also implement these standard GATT entries because SW update probably needs them:                              |
 | GATT_UUID_MANU_NAME/0x2a29           | read        |                                                                                                                   |
 | GATT_UUID_HW_VERSION_STR/0x2a27      | read        |                                                                                                                   |

docs/software/esp32-arduino-build-notes.md

@@ -10,7 +10,7 @@ you'll automatically get our fixed libraries.
   IDF release/v3.3 46b12a560
   IDF release/v3.3 367c3c09c
   https://docs.espressif.com/projects/esp-idf/en/release-v3.3/get-started/linux-setup.html
-  kevinh@kevin-server:~/development/meshtastic/esp32-arduino-lib-builder\$ python /home/kevinh/development/meshtastic/esp32-arduino-lib-builder/esp-idf/components/esptool*py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dout --flash_freq 40m --flash_size detect 0x1000 /home/kevinh/development/meshtastic/esp32-arduino-lib-builder/build/bootloader/bootloader.bin
+  kevinh@kevin-server:~/development/meshtastic/esp32-arduino-lib-builder\$ python /home/kevinh/development/meshtastic/
   cp -a out/tools/sdk/* components/arduino/tools/sdk
   cp -ar components/arduino/* ~/.platformio/packages/framework-arduinoespressif32
   
@@ -21,3 +21,9 @@ you'll automatically get our fixed libraries.
   cp -ar out/tools/sdk/* ~/.platformio/packages/framework-arduinoespressif32/tools/sdk
 
 ```
+
+How to flash new bootloader
+
+```
+esp32-arduino-lib-builder/esp-idf/components/esptool*py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dout --flash_freq 40m --flash_size detect 0x1000 /home/kevinh/development/meshtastic/esp32-arduino-lib-builder/build/bootloader/bootloader.bin
+```

docs/software/mqtt.md

@@ -0,0 +1,192 @@
+
+# Table of Contents
+- [Table of Contents](#table-of-contents)
+  - [Abstract](#abstract)
+  - [Short term goals](#short-term-goals)
+  - [Long term goals](#long-term-goals)
+  - [Multiple Channel support / Security](#multiple-channel-support--security)
+  - [On device API](#on-device-api)
+  - [MQTT transport](#mqtt-transport)
+    - [Topics](#topics)
+      - [Service Envelope](#service-envelope)
+      - [NODEID](#nodeid)
+      - [USERID](#userid)
+      - [CHANNELID](#channelid)
+    - [Gateway nodes](#gateway-nodes)
+    - [Optional web services](#optional-web-services)
+      - [Public MQTT broker service](#public-mqtt-broker-service)
+      - [Riot.im messaging bridge](#riotim-messaging-bridge)
+    - [Deprecated concepts](#deprecated-concepts)
+      - [MESHID (deprecated)](#meshid-deprecated)
+      - [DESTCLASS (deprecated)](#destclass-deprecated)
+      - [DESTID (deprecated)](#destid-deprecated)
+  - [Rejected idea: RAW UDP](#rejected-idea-raw-udp)
+  - [Development plan](#development-plan)
+    - [Work items](#work-items)
+    - [Enhancements in following releases](#enhancements-in-following-releases)
+
+## Abstract
+
+This is a mini-doc/RFC sketching out a development plan to satisfy a number of 1.1 goals.
+
+- [MQTT](https://opensource.com/article/18/6/mqtt) internet accessible API.  Issue #[369](https://github.com/meshtastic/Meshtastic-device/issues/169)
+- An open API to easily run custom mini-apps on the devices
+- A text messaging bridge when a node in the mesh can gateway to the internet. Issue #[353](https://github.com/meshtastic/Meshtastic-device/issues/353) and this nicely documented [android issue](https://github.com/meshtastic/Meshtastic-Android/issues/2).
+- An easy way to let desktop app developers remotely control GPIOs. Issue #[182](https://github.com/meshtastic/Meshtastic-device/issues/182)
+- Remote attribute access (to change settings of distant nodes). Issue #182
+
+## Short term goals
+
+- We want a clean API for novice developers to write mini "apps" that run **on the device** with the existing messaging/location "apps".
+- We want the ability to have a gateway web service, so that if any node in the mesh can connect to the internet (via its connected phone app or directly) then that node will provide bidirectional messaging between nodes and the internet.
+- We want an easy way for novice developers to remotely read and control GPIOs (because this is an often requested use case), without those developers having to write any device code.
+- We want a way to gateway text messaging between our current private meshes and the broader internet (when that mesh is able to connect to the internet)
+- We want a way to remotely set any device/channel parameter on a node. This is particularly important for administering physically inaccessible router nodes. Ideally this mechanism would also be used for administering the local node (so one common mechanism for both cases).
+- This work should be independent of our current (semi-custom) LoRa transport, so that in the future we can swap out that transport if we wish (to QMesh or Reticulum?)
+- Our networks are (usually) very slow and low bandwidth, so the messaging must be very airtime efficient.
+
+## Long term goals
+
+- Store and forward messaging should be supported, so apps can send messages that might be delivered to their destination in **hours** or **days** if a node/mesh was partitioned.
+
+## Multiple Channel support / Security
+
+Mini-apps API can bind to particular channels. They will only see messages sent on that channel.
+
+During the 1.0 timeframe only one channel was supported per node.  Starting in the 1.1 tree we will do things like "remote admin operations / channel settings etc..." are on the "Control" channel and only especially trusted users should have the keys to access that channel.
+
+FIXME - explain this more, talk about how useful for users and security domains.
+- add channels as security
+
+## On device API
+
+For information on the related on-device API see [here](device-api.md).
+
+## MQTT transport
+
+Any gateway-device will contact the MQTT broker. 
+
+### Topics
+
+The "mesh/crypt/CHANNELID/NODEID/PORTID" [topic](https://www.hivemq.com/blog/mqtt-essentials-part-5-mqtt-topics-best-practices/) will be used for messages sent from/to a mesh.
+
+Gateway nodes will foward any MeshPacket from a local mesh channel with uplink_enabled.  The packet (encapsulated in a ServiceEnvelope) will remain encrypted with the key for the specified channel.  
+
+For any channels in the local node with downlink_enabled, the gateway node will forward packets from MQTT to the local mesh.  It will do this by subscribing to mesh/crypt/CHANNELID/# and forwarding relevant packets.
+
+If the channelid 'well known'/public it could be decrypted by a web service (if the web service was provided with the associated channel key), in which case it will be decrypted by a web service and appear at "mesh/clear/CHANNELID/NODEID/PORTID". Note: This is not in the initial deliverable. 
+
+FIXME, discuss how text message global mirroring could scale (or not)
+FIXME, possibly don't global mirror text messages - instead rely on matrix/riot? 
+FIXME, discuss possible attacks by griefers and how they can be prvented
+
+#### Service Envelope
+
+The payload published on mesh/... will always be wrapped in a [ServiceEnvelope protobuf](https://github.com/meshtastic/Meshtastic-protobufs/blob/master/docs/docs.md#.ServiceEnvelope).
+
+ServiceEnvelope will include the message, and full information about arrival time, who forwarded it, source channel, source mesh id, etc... 
+
+#### NODEID
+
+The unique ID for a node. A hex string that starts with a ! symbol.
+
+#### USERID
+
+A user ID string. This string is either a user ID if known or a nodeid to simply deliver the message to whoever the local user is of a particular device (i.e. person who might see the screen). FIXME, see what riot.im uses and perhaps use that convention? Or use the signal +phone number convention? Or the email addr?
+
+#### CHANNELID
+
+FIXME, figure out how channelids work
+
+### Gateway nodes
+
+Any meshtastic node that has a direct connection to the internet (either via a helper app or installed wifi/4G/satellite hardware) can function as a "Gateway node". 
+
+Gateway nodes (via code running in the phone) will contain two tables to whitelist particular traffic to either be delivered toward the internet, or down toward the mesh. Users that are developing custom apps will be able to customize these filters/subscriptions.
+
+Since multiple gateway nodes might be connected to a single mesh, it is possible that duplicate messages will be published on any particular topic.  Therefore subscribers to these topics should
+deduplicate if needed by using the packet ID of each message.
+
+### Optional web services
+
+#### Public MQTT broker service
+
+An existing public [MQTT broker](https://mosquitto.org/) will be the default for this service, but clients can use any MQTT broker they choose. 
+
+FIXME - figure out how to avoid impersonation (because we are initially using a public mqtt server with no special security options).  FIXME, include some ideas on this in the ServiceEnvelope documentation.
+
+#### Riot.im messaging bridge
+
+@Geeksville will run a riot.im bridge that talks to the public MQTT broker and sends/receives into the riot.im network.
+
+There is apparently [already](https://github.com/derEisele/tuple) a riot.im [bridge](https://matrix.org/bridges/) for MQTT. That will possibly need to be customized a bit. But by doing this, we should be able to let random riot.im users send/receive messages to/from any meshtastic device. (FIXME ponder security).  See this [issue](https://github.com/meshtastic/Meshtastic-Android/issues/2#issuecomment-645660990) with discussion with the dev.
+
+### Deprecated concepts
+
+You can ignore these for now...
+
+#### MESHID (deprecated)
+
+Earlier drafts of this document included the concept of a MESHID.  That concept has been removed for now, but might be useful in the future.  The old idea is listed below:
+
+A unique ID for this mesh. There will be some sort of key exchange process so that the mesh ID can not be impersonated by other meshes. 
+
+#### DESTCLASS (deprecated)
+
+Earlier drafts of this document included the concept of a DESTCLASS.  That concept has been removed for now, but might be useful in the future.  The old idea is listed below:
+
+The type of DESTID this message should be delivered to. A short one letter sequence:
+
+| Symbol | Description                                                   |
+| ------ | ------------------------------------------------------------- |
+| R      | riot.im                                                       |
+| L      | local mesh node ID or ^all                                    |
+| A      | an application specific message, ID will be an APP ID         |
+| S      | SMS gateway, DESTID is a phone number to reach via Twilio.com |
+| E      | Emergency message, see bug #fixme for more context            |
+
+#### DESTID (deprecated)
+
+Earlier drafts of this document included the concept of a DESTCLASS.  That concept has been removed for now, but might be useful in the future.  The old idea is listed below:
+
+Can be...
+
+- an internet username: kevinh@geeksville.com
+- ^ALL for anyone
+- An app ID (to allow apps out in the web to receive arbitrary binary data from nodes or simply other apps using meshtastic as a transport). They would connect to the MQTT broker and subscribe to their topic
+
+## Rejected idea: RAW UDP
+
+A number of commenters have requested/proposed using UDP for the transport.  We've considered this option and decided to use MQTT instead for the following reasons:
+
+  - Most UDP uses cases would need to have a server anyways so that nodes can reach each other from anywhere (i.e. if most gateways will be behind some form of NAT which would need to be tunnelled)
+  - Raw UDP is dropped **very** agressively by many cellular providers.  MQTT from the gateway to a broker can be done over a TCP connection for this reason.
+  - MQTT provides a nice/documented/standard security model to build upon
+  - MQTT is fairly wire efficient with multiple broker implementations/providers and numerous client libraries for any language.  The actual implementation of MQTT is quite simple.
+  
+## Development plan
+
+Given the previous problem/goals statement, here's the initial thoughts on the work items required.  As this idea becomes a bit more fully baked we should add details
+on how this will be implemented and guesses at approximate work items.
+
+### Work items
+
+- Change nodeIDs to be base64 instead of eight hex digits.
+- DONE Refactor the position features into a position "mini-app". Use only the new public on-device API to implement this app.
+- DONE Refactor the on device texting features into a messaging "mini-app". (Similar to the position mini-app)
+- Add new multi channel concept
+- Send new channels to python client
+- Let python client add channels
+- Add portion of channelid to the raw lora packet header
+- Confirm that we can now forward encrypted packets without decrypting at each node
+- Use a channel named "remotehw" to secure the GPIO service.  If that channel is not found, don't even start the service.  Document this as the standard method for securing services.
+- Add first cut of the "gateway node" code (i.e. MQTT broker client) to the python API (very little code needed for this component)
+- Confirm that texting works to/from the internet
+- Confirm that positions are optionally sent to the internet
+- Add the first cut of the "gateway node" code to the android app (very little code needed for this component)
+
+### Enhancements in following releases
+
+The initial gateway will be added to the python tool.  But the gateway implementation is designed to be fairly trivial/dumb.  After the initial release the actual gateway code can be ported to also run inside of the android app.  In fact, we could have ESP32 based nodes include a built-in "gateway node" implementation.
+
+Store and forward could be added so that nodes on the mesh could deliver messages (i.e. text messages) on an "as possible" basis.  This would allow things like "hiker sends a message to friend - mesh can not currently reach friend - eventually (days later) mesh can somehow reach friend, message gets delivered"

docs/software/nrf52-TODO.md

@@ -5,7 +5,27 @@
 
 ## RAK815
 
-TODO:
+### PPR1 TODO
+
+* V_BK for the GPS should probably be supplied from something always on
+
+* use S113 soft device 7.2.0
+* properly test charge controller config and read battery/charge status
+* fix bluetooth
+* fix LCD max contrast (currently too high, needs to be about 40?)
+* save brightness settings in flash
+* make ST7567Wire driver less ugly, move OLED stuff into a common class treee
+* add LCD power save mode for lcd per page 31 of datasheet
+* add LCD power off sequence per datasheet to lcd driver
+* leave LCD screen on most of the time (because it needs little power)
+
+### general nrf52 TODO:
+
+- turn off transitions on eink screens
+- change update interval on eink from 1/sec frames to one frame every 5 mins
+- enter SDS state at correct time (to protect battery or loss of phone contact)
+- show screen on eink when we enter SDS state (with app info and say sleeping)
+- require button press to pair
 
 - shrink soft device RAM usage
 - get nrf52832 working again (currently OOM)

docs/software/pinetab.md

@@ -2,18 +2,25 @@
 
 These are **preliminary** notes on support for Meshtastic in the Pinetab.
 
-A RF95 is connected via a CS341 USB-SPI chip.
+A RF95 is connected via a CH341 USB-SPI chip.
 
 Pin assignments:
-CS0 from RF95 goes to CS0 on CS341
-DIO0 from RF95 goes to INT on CS341
-RST from RF95 goes to RST on CS341
+CS0 from RF95 goes to CS0 on CH341
+DIO0 from RF95 goes to INT on CH341
+RST from RF95 goes to RST on CH341
 
 This linux driver claims to provide USB-SPI support: https://github.com/gschorcht/spi-ch341-usb
 Notes here on using that driver: https://www.linuxquestions.org/questions/linux-hardware-18/ch341-usb-to-spi-adaptor-driver-doesn%27t-work-4175622736/
 
 Or if **absolutely** necessary could bitbang: https://www.cnx-software.com/2018/02/16/wch-ch341-usb-to-serial-chip-gets-linux-driver-to-control-gpios-over-usb/
 
+## Portduino tasks
+
+* How to access spi devices via ioctl (spidev): https://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md#:~:text=Troubleshooting-,Overview,bus)%2C%20UARTs%2C%20etc.
+* access gpio via libgpiod?
+* Use dkms to distribute driver? 
+* echo 100 > /sys/module/spi_ch341_usb/parameters/poll_period
+
 ## Task list
 
 * Port meshtastic to build (under platformio) for a poxix target.  spec: no screen, no gpios, sim network interface, posix threads, posix semaphores & queues, IO to the console only

docs/software/plugin-api.md

@@ -0,0 +1,81 @@
+# Plugin-API
+
+This is a tutorial on how to write small plugins which run on the device.  Plugins are bits regular 'arduino' code that can send and receive packets to other nodes/apps/PCs using our mesh.
+
+## Key concepts
+
+All plugins should be subclasses of MeshPlugin.  By inheriting from this class and creating an instance of your new plugin your plugin will be automatically registered to receive packets.
+
+Messages are sent to particular port numbers (similar to UDP networking).  Your new plugin should eventually pick its own port number (see below), but at first you can simply use PRIVATE_APP (which is the default).
+
+Packets can be sent/received either as raw binary structures or as [Protobufs](https://developers.google.com/protocol-buffers).
+
+### Class heirarchy
+
+The relevant bits of the class heirarchy are as follows
+
+* [MeshPlugin](/src/mesh/MeshPlugin.h) (in src/mesh/MeshPlugin.h) - you probably don't want to use this baseclass directly
+  * [SinglePortPlugin](/src/mesh/SinglePortPlugin.h) (in src/mesh/SinglePortPlugin.h) - for plugins that send/receive from a single port number (the normal case)
+    * [ProtobufPlugin](/src/mesh/ProtobufPlugin.h) (in src/mesh/ProtobufPlugin.h) - for plugins that send/receive a single particular Protobuf type.  Inherit from this if you are using protocol buffers in your plugin.
+
+You will typically want to inherit from either SinglePortPlugin (if you are just sending/receiving raw bytes) or ProtobufPlugin (if you are sending/receiving protobufs).  You'll implement your own handleReceived/handleReceivedProtobuf - probably based on the example code.
+
+If your plugin needs to perform any operations at startup you can override and implement the setup() method to run your code.
+
+If you need to send a packet you can call service.sendToMesh with code like this (from the examples):
+
+```
+    MeshPacket *p = allocReply();
+    p->to = dest;
+
+    service.sendToMesh(p);
+```
+
+## Example plugins
+
+A number of [key services](/src/plugins) are implemented using the plugin API, these plugins are as follows:
+
+* [TextMessagePlugin](/src/plugins/TextMessagePlugin.h) - receives text messages and displays them on the LCD screen/stores them in the local DB
+* [NodeInfoPlugin](/src/plugins/NodeInfoPlugin.h) - receives/sends User information to other nodes so that usernames are available in the databases
+* [RemoteHardwarePlugin](/src/plugins/RemoteHardwarePlugin.h) - a plugin that provides easy remote access to device hardware (for things like turning GPIOs on or off).  Intended to be a more extensive example and provide a useful feature of its own.  See [remote-hardware](remote-hardware.md) for details.
+* [ReplyPlugin](/src/plugins/ReplyPlugin.h) - a simple plugin that just replies to any packet it receives (provides a 'ping' service).
+
+## Getting started
+
+The easiest way to get started is:
+
+* [Build and install](build-instructions.md) the standard codebase from github.
+* Copy [src/plugins/ReplyPlugin.*](/src/plugins/ReplyPlugin.cpp) into src/plugins/YourPlugin.*.  Then change the port number from *PortNum_REPLY_APP* to *PortNum_PRIVATE_APP*.
+* Edit plugins/Plugins.cpp:setupPlugins() to add a call to create an instance of your plugin (see comment at head of that function)
+* Rebuild with your new messaging goodness and install on the device
+* Use the [meshtastic commandline tool](https://github.com/meshtastic/Meshtastic-python) to send a packet to your board, for example "*meshtastic --dest 1234 --sendping*", where *1234* is another mesh node to send the ping to.
+
+## Threading
+
+It is very common that you would like your plugin to be invoked periodically.
+We use a crude/basic cooperative threading system to allow this on any of our supported platforms.  Simply inherit from OSThread and implement runOnce().  See the OSThread [documentation](/src/concurrency/OSThread.h) for more details.  For an example consumer of this API see RemoteHardwarePlugin::runOnce.
+
+## Sending messages
+
+If you would like to proactively send messages (rather than just responding to them), just call service.sendToMesh().  For an example of this see [NodeInfoPlugin::sendOurNodeInfo(...)](/src/plugins/NodeInfoPlugin.cpp).
+
+## Picking a port number
+
+For any new 'apps' that run on the device or via sister apps on phones/PCs they should pick and use a unique 'portnum' for their application.
+
+If you are making a new app using meshtastic, please send in a pull request to add your 'portnum' to [the master list](https://github.com/meshtastic/Meshtastic-protobufs/blob/master/portnums.proto).  PortNums should be assigned in the following range:
+
+* **0-63** Core Meshtastic use; do not use for third party apps
+* **64-127** Registered 3rd party apps.  Send in a pull request that adds a new entry to portnums.proto to register your application
+* **256-511** Use one of these portnums for your private applications that you don't want to register publically
+* **1024-66559** Are reserved for use by IP tunneling (see *FIXME* for more information)
+
+All other values are reserved.
+
+## How to add custom protocol buffers
+
+If you would like to use protocol buffers to define the structures you send over the mesh (recommended), here's how to do that.
+
+* Create a new .proto file in the protos directory.  You can use the existing [remote_hardware.proto](https://github.com/meshtastic/Meshtastic-protobufs/blob/master/remote_hardware.proto) file as an example.
+* Run "bin/regen-protos.sh" to regenerate the C code for accessing the protocol buffers.  If you don't have the required nanopb tool, follow the instructions printed by the script to get it.
+* Done!  You can now use your new protobuf just like any of the existing protobufs in meshtastic.

docs/software/plugins/ExternalNotificationPlugin.md

@@ -0,0 +1,89 @@
+# About
+
+The ExternalNotification Plugin will allow you to connect a speaker, LED or other device to notify you when a message has been received from the mesh network.
+
+# Configuration
+
+These are the settings that can be configured.
+
+    ext_notification_plugin_enabled
+        Is the plugin enabled?
+        
+        0 = Disabled (Default)
+        1 = Enabled
+
+    ext_notification_plugin_active
+        Is your external circuit triggered when our GPIO is low or high?
+
+        0 = Active Low (Default)
+        1 = Active High
+
+    ext_notification_plugin_alert_message
+        Do you want to be notified on an incoming message?
+
+        0 = Disabled (Default)
+        1 = Alert when a text message comes
+
+    ext_notification_plugin_alert_bell
+        Do you want to be notified on an incoming bell?
+
+        0 = Disabled (Default)
+        1 = Alert when the bell character is received
+
+    ext_notification_plugin_output
+        What GPIO is your external circuit attached?
+
+        GPIO of the output. (Default = 13)
+
+    ext_notification_plugin_output_ms
+        How long do you want us to trigger your external circuit?
+    
+        Amount of time in ms for the alert. Default is 1000.
+
+
+# Usage Notes
+
+For basic usage, start with:
+
+	ext_notification_plugin_enabled = 1
+	ext_notification_plugin_alert_message = 1
+    
+Depending on how your external cirtcuit configured is configured, you may need to set the active state to true.
+
+	ext_notification_plugin_active = 1
+	
+## Alert Types
+
+We support being alerted on two events:
+
+1) Incoming Text Message
+
+2) Incoming Text Message that contains the ascii bell character. At present, only the Python API can send an ascii bell character, but more support may be added in the future.
+
+### Bell Character
+
+The bell character is ASCII 0x07. Include 0x07 anywhere in the text message and with ext_notification_plugin_alert_bell enabled, we will issue an external notification.
+    
+# External Hardware
+
+Be mindful of the max current sink and source of the esp32 GPIO. The easiest devices to interface with would be either an LED or Active Buzzer.
+
+Ideas for external hardware:
+
+* LED
+* Active Buzzer
+* Flame thrower
+* Strobe Light
+* Siren
+    
+# Known Problems
+
+* This won't directly support an passive (normal) speaker as it does not generate any audio wave forms.
+* This currently only supports the esp32. Other targets may be possible, I just don't have to test with.
+* This plugin only monitors text messages. We won't trigger on any other packet types.
+
+# Need more help?
+
+Go to the Meshtastic Discourse Group if you have any questions or to share how you have used this.
+
+https://meshtastic.discourse.group

docs/software/plugins/RangeTestPlugin.md

@@ -0,0 +1,105 @@
+# About
+
+The RangeTest Plugin will help you perform range and coverage tests.
+
+# Configuration
+
+These are the settings that can be configured.
+
+    range_test_plugin_enabled
+        Is the plugin enabled?
+        
+        0 = Disabled (Default)
+        1 = Enabled
+
+    range_test_plugin_save
+        If enabled, we will save a log of all received messages to /static/rangetest.csv which you can access from the webserver. We will abort
+        writing if there is less than 50k of space on the filesystem to prevent filling up the storage.
+
+        0 = Disabled (Default)
+        1 = Enabled
+
+    range_test_plugin_sender
+        Number of seconds to wait between sending packets. Using the long_slow channel configuration, it's best not to go more frequent than once every 60 seconds. You can be more agressive with faster settings. 0 is default which disables sending messages.
+
+# Usage Notes
+
+For basic usage, you will need two devices both with a GPS. A device with a paired phone with GPS may work, I have not tried it. 
+
+The first thing to do is to turn on the plugin. With the plugin turned on, the other settings will be available:
+
+	range_test_plugin_enabled = 1
+
+If you want to send a message every 60 seconds:
+    
+	range_test_plugin_sender = 60
+
+To save a log of the messages:
+
+    range_test_plugin_save = 1
+
+Recommended settings for a sender at different radio settings:
+
+    Long Slow  ... range_test_plugin_sender = 60
+    Long Alt   ... range_test_plugin_sender = 30
+    Medium     ... range_test_plugin_sender = 15
+    Short Fast ... range_test_plugin_sender = 15
+
+## Python API Examples
+
+### Sender 
+
+    meshtastic --set range_test_plugin_enabled 1
+    meshtastic --set range_test_plugin_sender 60
+
+### Receiver
+
+    meshtastic --set range_test_plugin_enabled 1
+    meshtastic --set range_test_plugin_save 1
+
+## Other things to keep in mind
+
+Be sure to turn off either the plugin configured as a sender or the device where the plugin setup as sender when not in use. This will use a lot of time on air and will spam your channel.
+
+Also be mindful of your space usage on the file system. It has protections from filling up the space but it's best to delete old range test results.
+
+
+# Known Problems
+
+* If turned on, using mesh network will become unwieldly because messages are sent over the same channel as the other messages. See TODO below.
+
+# TODO
+
+* Right now range test messages go over the TEXT_MESSAGE_APP port. We need a toggle to switch to optionally send over RANGE_TEST_APP.
+
+# FAQ
+
+Q: Where is rangetest.csv saved?
+A: Turn on the WiFi on your device as either a WiFi client or a WiFi AP. Once you can connect to your device, go to /static and you will see rangetest.csv.
+
+Q: Do I need to have WiFi turned on for the file to be saved?
+A: Nope, it'll just work.
+
+Q: Do I need a phone for this plugin?
+A: There's no need for a phone.
+
+Q: Can I use this as a message logger?
+A: While it's not the intended purpose, sure, why not. Do it!
+
+Q: What will happen if I run out of space on my device?
+A: We have a protection in place to keep you from completly filling up your device. This will make sure that other device critical functions will continue to work. We will reserve at least 50k of free space.
+
+Q: What do I do with the rangetest.csv file when I'm done?
+A: Go to /static and delete the file.
+
+Q: Can I use this as a sender while on battery power?
+A: Yes, but your battery will run down quicker than normal. While sending, we tell the device not to go into low-power mode since it needs to keep to a fairly strict timer.
+
+Q: Why is this operating on incoming messages instead of the existing location discovery protocol?
+A: This plugin is still young and currently supports monitoring just one port at a time. I decided to use the existing message port because that is easy to test with. A future version will listen to multiple ports to be more promiscuous. 
+
+# Need more help?
+
+Go to the Meshtastic Discourse Group if you have any questions or to share how you have used this.
+
+https://meshtastic.discourse.group

docs/software/plugins/SerialPlugin.md

@@ -0,0 +1,40 @@
+# About
+
+A simple interface to send messages over the mesh network by sending strings
+over a serial port.
+
+Default is to use RX GPIO 16 and TX GPIO 17.
+
+
+# Basic Usage:
+
+        1) Enable the plugin by setting serialplugin_enabled to 1.
+        2) Set the pins (serialplugin_rxd / serialplugin_rxd) for your preferred RX and TX GPIO pins.
+           On tbeam, recommend to use:
+                RXD 35
+                TXD 15
+        3) Set serialplugin_timeout to the amount of time to wait before we consider
+           your packet as "done".
+        4) (Optional) In SerialPlugin.h set the port to PortNum_TEXT_MESSAGE_APP if you want to
+           send messages to/from the general text message channel.
+        5) Connect to your device over the serial interface at 38400 8N1.
+        6) Send a packet up to 240 bytes in length. This will get relayed over the mesh network.
+        7) (Optional) Set serialplugin_echo to 1 and any message you send out will be echoed back
+           to your device.
+
+# TODO (in this order):
+
+* Define a verbose RX mode to report on mesh and packet infomration.
+        - This won't happen any time soon.
+
+# Known Problems
+
+    * Until the plugin is initilized by the startup sequence, the TX pin is in a floating
+      state. Device connected to that pin may see this as "noise".
+    * Will not work on NRF and the Linux device targets.
+    
+# Need help?
+
+Need help with this plugin? Post your question on the Meshtastic Discourse:
+
+https://meshtastic.discourse.group

docs/software/plugins/StoreForwardPlugin.md

@@ -0,0 +1,105 @@
+# About
+
+This is a work in progress and is not yet available.
+
+The Store Forward Plugin is an implementation of a Store and Forward system to enable resilient messaging in the event that a client device is disconnected from the main network.
+
+Because of the increased network traffic for this overhead, it's not adviced to use this if you are duty cycle limited for your airtime usage nor is it adviced to use this for SF12 (Long range but Slow).
+
+# Requirements
+
+Initial Requirements:
+
+* Must be installed on a router node.
+* * This is an artificial limitation, but is in place to enforce best practices.
+* * Router nodes are intended to be always online. If this plugin misses any messages, the reliability of the stored messages will be reduced
+* Esp32 Processor based device with external PSRAM. (tbeam v1.0 and tbeamv1.1, maybe others)
+
+# Implementation timeline
+
+Not necessarily in this order:
+
+UC 1) MVP - automagically forward packets to a client that may have missed packets.
+
+UC 2) Client Interface (Web, Android, Python or iOS when that happens) to optionally request packets be resent. This is to support the case where Router has not detected that the client was away. This is because the router will only know you're away if you've been gone for a period of time but will have no way of knowing if you were offline for a short number of minutes. This will cover the case where you have ducked into a cave or you're swapping out your battery.
+
+UC 3) router sends a periodic “heartbeat” to let the clients know they’re part of the main mesh
+
+UC 4) support for a mesh to have multiple routers that have the store & forward functionality (for redundancy)
+
+UC 5) Support for "long term" delayed messages and "short term" delayed messages. Handle the cases slightly different to improve user expierence. A short term delayed message would be a message that was resent becaue a node was not heard from for <5 minutes. A long term delayed message is a message that has not been delivered in >5 minutes.
+
+UC 6) Eventually we could add a "want_store_and_forward" bit to MeshPacket and that could be nicer than whitelists in this plugin. Initially we'd only set that bit in text messages (and any other plugin messages that can cope with this). This change would be backward wire compatible so can add easily later.
+
+UC 7) Currently the way we allocate messages in the device code is super inefficient. It always allocates the worst case message size. Really we should dynamically allocate just the # of bytes we need. This would allow many more MeshPackets to be kept in RAM.
+
+UC 8) We'll want a "delayed" bit in MeshPacket. This will indicate that the message was not received in real time.
+
+# Things to consider
+
+Not all these cases will be initially implemented. It's just a running stream of thoughts to be considered.
+
+## Main Mesh Network with Router
+
+The store and forward plugin is intended to be enabled on a router that designates your "main" mesh network.
+
+## Store and Forward on Multiple Routers
+
+If multiple routers with the plugin are enabled, they should be able to share their stored database amongst each other. This enable resilliancy from one router going offline.
+
+## Fragmented networks - No router
+
+In this case, the mesh network has been fragmented by two client devices leaving the main network.
+
+If two Meshtastic devices walk away from the main mesh, they will be able to message each other but not message the main network. When they return to the main network, they will receive the messages they have missed from the main mesh network.
+
+## Fragmented network - With routers
+
+In this case, we have two routers separate by a great distance, each serving multiple devices. One of the routers have gone offline. This has now created two physically seaprated mesh networks using the same channel configuration.
+
+Q: How do we rejoin both fragmented networks? Do we care about messages that were unrouted between fagments?
+
+## Identifing Delayed Messages
+
+When a message is replayed for a node, identify the packet as "Delayed". This will indicate that the message was not received in real time.
+
+# Router Data Structures
+
+Structure of received messages:
+
+    receivedMessages
+      Port_No
+      packetID
+      to
+      from
+      rxTimeMsec
+      data
+
+Structure of nodes and last time we heard from them. This is a record of any packet type.
+
+    receivedRecord
+      From
+      rxTimeMillis
+
+# General Operation for UC1 - automagically forward packets to a client that may have missed packets
+
+On every handled packet
+* Record the sender from and the time we heard from that sender into senderRecord.
+
+On every handled packet
+
+* If the packet is a message, save the messsage into receivedMessages
+
+On every handled packet, if we have not heard from that sender in a period of time greater than timeAway, let's assume that they have been away from the network.
+
+* In this case, we will resend them all the messages they have missed since they were gone
+
+## Expected problems this implementation
+
+* If the client has been away for less than 5 minutes and has received the previously sent message, the client will gracefully ignore it. This is thanks to PacketHistory::wasSeenRecently in PacketHistory.cpp.
+* * If the client has been away for more than 5 minutes and we resend packets that they have already received, it's possible they will see duplicate messages. This should be unlikely but is still possible. 
+
+
+# Designed limitations
+
+The Store and Forward plugin will subscribe to specific packet types and channels and only save those. This will both reduce the amount of data we will need to store and reduce the overhead on the network. Eg: There's no need to replay ACK packets nor is there's no need to replay old location packets.

docs/software/power.md

@@ -50,7 +50,7 @@ From lower to higher power consumption.
 
 - At cold boot: The initial state (after setup() has run) is DARK
 - While in DARK: if we receive EVENT_BOOT, transition to ON (and show the bootscreen). This event will be sent if we detect we woke due to reset (as opposed to deep sleep)
-- While in LS: Once every position_broadcast_secs (default 15 mins) - the unit will wake into DARK mode and broadcast a "networkPing" (our position) and stay alive for wait_bluetooth_secs (default 30 seconds). This allows other nodes to have a record of our last known position if we go away and allows a paired phone to hear from us and download messages.
+- While in LS: Once every position_broadcast_secs (default 15 mins) - the unit will wake into DARK mode and broadcast a "networkPing" (our position) and stay alive for wait_bluetooth_secs (default 60 seconds). This allows other nodes to have a record of our last known position if we go away and allows a paired phone to hear from us and download messages.
 - While in LS: Every send*owner_interval (defaults to 4, i.e. one hour), when we wake to send our position we \_also* broadcast our owner. This lets new nodes on the network find out about us or correct duplicate node number assignments.
 - While in LS/NB/DARK: If the user presses a button (EVENT_PRESS) we go to full ON mode for screen_on_secs (default 30 seconds). Multiple presses keeps resetting this timeout
 - While in LS/NB/DARK: If we receive new text messages (EVENT_RECEIVED_TEXT_MSG), we go to full ON mode for screen_on_secs (same as if user pressed a button)

docs/software/remote-hardware-service.md

@@ -0,0 +1,23 @@
+# Remote Hardware Service
+
+FIXME - the following are a collection of notes moved from elsewhere.  We need to refactor these notes into actual documentation on the remote-hardware/gpio service.
+
+### 1.7.2. New 'no-code-IOT' mini-app
+
+Add a new 'remote GPIO/serial port/SPI/I2C access' mini-app. This new standard app would use the MQTT messaging layer to let users (developers that don't need to write device code) do basic (potentially dangerous) operations remotely.
+
+#### 1.7.2.1. Supported operations in the initial release
+
+Initially supported features for no-code-IOT.
+
+- Set any GPIO
+- Read any GPIO
+
+#### 1.7.2.2. Supported operations eventually
+
+General ideas for no-code IOT.
+
+- Subscribe for notification of GPIO input status change (i.e. when pin goes low, send my app a message)
+- Write/read N bytes over I2C/SPI bus Y (as one atomic I2C/SPI transaction)
+- Send N bytes out serial port Z
+- Subscribe for notification for when regex X matches the bytes that were received on serial port Z

docs/software/sw-design.md

@@ -1,9 +1,10 @@
 This is a mini design doc for developing the meshtastic software.
 
 * [Build instructions](build-instructions.md)
+* [On device plugin API](plugin-api.md) - a tutorial on how to write small Plugins which run on the device and can message other nodes.
 * [TODO](TODO.md) - read this if you are looking for things to do (or curious about currently missing features)
 * Our [project board](https://github.com/orgs/meshtastic/projects/1) - shows what things we are currently working on and remaining work items for the current release.
 * [Power Management](power.md)
 * [Mesh algorithm](mesh-alg.md)
-* [Device API](device-api.md) and porting guide for new clients (iOS, python, etc...)
+* [External client API](device-api.md) and porting guide for new clients (iOS, python, etc...)
 * TODO: how to port the device code to a new device.

images/genfiles.sh

@@ -1,11 +0,0 @@
-# using height of 50 to have 14 pixels beneath icon for text
-inkscape -z -e icon.png -w 50 -h 50 icon-24px.svg
-convert icon.png -background white -alpha Background ../src/icon.xbm
-
-inkscape -z -e compass.png -w 48 -h 48 location_searching-24px.svg
-convert compass.png -background white -alpha Background ../src/compass.xbm
-
-inkscape -z -e face.png -w 13 -h 13 face-24px.svg
-
-inkscape -z -e pin.png -w 13 -h 13 room-24px.svg
-convert pin.png -background white -alpha Background ../src/pin.xbm

lib/nanopb/include/pb.h

@@ -11,7 +11,7 @@
  *****************************************************************/
 
 /* Enable support for dynamically allocated fields */
-#define PB_ENABLE_MALLOC 1
+/* #define PB_ENABLE_MALLOC 1 */
 
 /* Define this if your CPU / compiler combination does not support
  * unaligned memory access to packed structures. */
@@ -55,7 +55,7 @@
 
 /* Version of the nanopb library. Just in case you want to check it in
  * your own program. */
-#define NANOPB_VERSION nanopb-0.4.1
+#define NANOPB_VERSION nanopb-0.4.4
 
 /* Include all the system headers needed by nanopb. You will need the
  * definitions of the following:
@@ -276,17 +276,18 @@ typedef struct pb_field_iter_s pb_field_iter_t;
 /* This structure is used in auto-generated constants
  * to specify struct fields.
  */
-PB_PACKED_STRUCT_START
 typedef struct pb_msgdesc_s pb_msgdesc_t;
 struct pb_msgdesc_s {
-    pb_size_t field_count;
     const uint32_t *field_info;
     const pb_msgdesc_t * const * submsg_info;
     const pb_byte_t *default_value;
 
     bool (*field_callback)(pb_istream_t *istream, pb_ostream_t *ostream, const pb_field_iter_t *field);
-} pb_packed;
-PB_PACKED_STRUCT_END
+
+    pb_size_t field_count;
+    pb_size_t required_field_count;
+    pb_size_t largest_tag;
+};
 
 /* Iterator for message descriptor */
 struct pb_field_iter_s {
@@ -469,137 +470,181 @@ struct pb_extension_s {
     }; \
     const pb_msgdesc_t structname ## _msg = \
     { \
-       0 msgname ## _FIELDLIST(PB_GEN_FIELD_COUNT, structname), \
        structname ## _field_info, \
        structname ## _submsg_info, \
        msgname ## _DEFAULT, \
        msgname ## _CALLBACK, \
+       0 msgname ## _FIELDLIST(PB_GEN_FIELD_COUNT, structname), \
+       0 msgname ## _FIELDLIST(PB_GEN_REQ_FIELD_COUNT, structname), \
+       0 msgname ## _FIELDLIST(PB_GEN_LARGEST_TAG, structname), \
     }; \
     msgname ## _FIELDLIST(PB_GEN_FIELD_INFO_ASSERT_ ## width, structname)
 
 #define PB_GEN_FIELD_COUNT(structname, atype, htype, ltype, fieldname, tag) +1
+#define PB_GEN_REQ_FIELD_COUNT(structname, atype, htype, ltype, fieldname, tag) \
+    + (PB_HTYPE_ ## htype == PB_HTYPE_REQUIRED)
+#define PB_GEN_LARGEST_TAG(structname, atype, htype, ltype, fieldname, tag) \
+    * 0 + tag
 
+/* X-macro for generating the entries in struct_field_info[] array. */
 #define PB_GEN_FIELD_INFO_1(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO(1, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_1(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_2(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO(2, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_2(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_4(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO(4, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_4(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_8(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO(8, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_8(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_AUTO(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_AUTO2(PB_FIELDINFO_WIDTH_AUTO(atype, htype, ltype), structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_AUTO2(PB_FIELDINFO_WIDTH_AUTO(_PB_ATYPE_ ## atype, _PB_HTYPE_ ## htype, _PB_LTYPE_ ## ltype), \
+                   tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
-#define PB_GEN_FIELD_INFO_AUTO2(width, structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO(width, structname, atype, htype, ltype, fieldname, tag)
+#define PB_FIELDINFO_AUTO2(width, tag, type, data_offset, data_size, size_offset, array_size) \
+    PB_FIELDINFO_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size)
 
-#define PB_GEN_FIELD_INFO(width, structname, atype, htype, ltype, fieldname, tag) \
-    PB_FIELDINFO_ ## width(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
-                   PB_DATA_OFFSET_ ## atype(htype, structname, fieldname), \
-                   PB_DATA_SIZE_ ## atype(htype, structname, fieldname), \
-                   PB_SIZE_OFFSET_ ## atype(htype, structname, fieldname), \
-                   PB_ARRAY_SIZE_ ## atype(htype, structname, fieldname))
+#define PB_FIELDINFO_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) \
+    PB_FIELDINFO_ ## width(tag, type, data_offset, data_size, size_offset, array_size)
 
+/* X-macro for generating asserts that entries fit in struct_field_info[] array.
+ * The structure of macros here must match the structure above in PB_GEN_FIELD_INFO_x(),
+ * but it is not easily reused because of how macro substitutions work. */
 #define PB_GEN_FIELD_INFO_ASSERT_1(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT(1, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_ASSERT_1(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_ASSERT_2(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT(2, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_ASSERT_2(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_ASSERT_4(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT(4, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_ASSERT_4(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_ASSERT_8(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT(8, structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_ASSERT_8(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
 #define PB_GEN_FIELD_INFO_ASSERT_AUTO(structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT_AUTO2(PB_FIELDINFO_WIDTH_AUTO(atype, htype, ltype), structname, atype, htype, ltype, fieldname, tag)
+    PB_FIELDINFO_ASSERT_AUTO2(PB_FIELDINFO_WIDTH_AUTO(_PB_ATYPE_ ## atype, _PB_HTYPE_ ## htype, _PB_LTYPE_ ## ltype), \
+                   tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
+                   PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \
+                   PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname))
 
-#define PB_GEN_FIELD_INFO_ASSERT_AUTO2(width, structname, atype, htype, ltype, fieldname, tag) \
-    PB_GEN_FIELD_INFO_ASSERT(width, structname, atype, htype, ltype, fieldname, tag)
+#define PB_FIELDINFO_ASSERT_AUTO2(width, tag, type, data_offset, data_size, size_offset, array_size) \
+    PB_FIELDINFO_ASSERT_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size)
 
-#define PB_GEN_FIELD_INFO_ASSERT(width, structname, atype, htype, ltype, fieldname, tag) \
-    PB_FIELDINFO_ASSERT_ ## width(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \
-                   PB_DATA_OFFSET_ ## atype(htype, structname, fieldname), \
-                   PB_DATA_SIZE_ ## atype(htype, structname, fieldname), \
-                   PB_SIZE_OFFSET_ ## atype(htype, structname, fieldname), \
-                   PB_ARRAY_SIZE_ ## atype(htype, structname, fieldname))
+#define PB_FIELDINFO_ASSERT_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) \
+    PB_FIELDINFO_ASSERT_ ## width(tag, type, data_offset, data_size, size_offset, array_size)
 
-#define PB_DATA_OFFSET_STATIC(htype, structname, fieldname) PB_DATA_OFFSET_ ## htype(structname, fieldname)
-#define PB_DATA_OFFSET_POINTER(htype, structname, fieldname) PB_DATA_OFFSET_ ## htype(structname, fieldname)
-#define PB_DATA_OFFSET_CALLBACK(htype, structname, fieldname) PB_DATA_OFFSET_ ## htype(structname, fieldname)
-#define PB_DATA_OFFSET_REQUIRED(structname, fieldname) offsetof(structname, fieldname)
-#define PB_DATA_OFFSET_SINGULAR(structname, fieldname) offsetof(structname, fieldname)
-#define PB_DATA_OFFSET_ONEOF(structname, fieldname) offsetof(structname, PB_ONEOF_NAME(FULL, fieldname))
-#define PB_DATA_OFFSET_OPTIONAL(structname, fieldname) offsetof(structname, fieldname)
-#define PB_DATA_OFFSET_REPEATED(structname, fieldname) offsetof(structname, fieldname)
-#define PB_DATA_OFFSET_FIXARRAY(structname, fieldname) offsetof(structname, fieldname)
+#define PB_DATA_OFFSET_STATIC(htype, structname, fieldname) PB_DO ## htype(structname, fieldname)
+#define PB_DATA_OFFSET_POINTER(htype, structname, fieldname) PB_DO ## htype(structname, fieldname)
+#define PB_DATA_OFFSET_CALLBACK(htype, structname, fieldname) PB_DO ## htype(structname, fieldname)
+#define PB_DO_PB_HTYPE_REQUIRED(structname, fieldname) offsetof(structname, fieldname)
+#define PB_DO_PB_HTYPE_SINGULAR(structname, fieldname) offsetof(structname, fieldname)
+#define PB_DO_PB_HTYPE_ONEOF(structname, fieldname) offsetof(structname, PB_ONEOF_NAME(FULL, fieldname))
+#define PB_DO_PB_HTYPE_OPTIONAL(structname, fieldname) offsetof(structname, fieldname)
+#define PB_DO_PB_HTYPE_REPEATED(structname, fieldname) offsetof(structname, fieldname)
+#define PB_DO_PB_HTYPE_FIXARRAY(structname, fieldname) offsetof(structname, fieldname)
 
-#define PB_SIZE_OFFSET_STATIC(htype, structname, fieldname) PB_SIZE_OFFSET_ ## htype(structname, fieldname)
-#define PB_SIZE_OFFSET_POINTER(htype, structname, fieldname) PB_SIZE_OFFSET_PTR_ ## htype(structname, fieldname)
-#define PB_SIZE_OFFSET_CALLBACK(htype, structname, fieldname) PB_SIZE_OFFSET_CB_ ## htype(structname, fieldname)
-#define PB_SIZE_OFFSET_REQUIRED(structname, fieldname) 0
-#define PB_SIZE_OFFSET_SINGULAR(structname, fieldname) 0
-#define PB_SIZE_OFFSET_ONEOF(structname, fieldname) PB_SIZE_OFFSET_ONEOF2(structname, PB_ONEOF_NAME(FULL, fieldname), PB_ONEOF_NAME(UNION, fieldname))
-#define PB_SIZE_OFFSET_ONEOF2(structname, fullname, unionname) PB_SIZE_OFFSET_ONEOF3(structname, fullname, unionname)
-#define PB_SIZE_OFFSET_ONEOF3(structname, fullname, unionname) pb_delta(structname, fullname, which_ ## unionname)
-#define PB_SIZE_OFFSET_OPTIONAL(structname, fieldname) pb_delta(structname, fieldname, has_ ## fieldname)
-#define PB_SIZE_OFFSET_REPEATED(structname, fieldname) pb_delta(structname, fieldname, fieldname ## _count)
-#define PB_SIZE_OFFSET_FIXARRAY(structname, fieldname) 0
-#define PB_SIZE_OFFSET_PTR_REQUIRED(structname, fieldname) 0
-#define PB_SIZE_OFFSET_PTR_SINGULAR(structname, fieldname) 0
-#define PB_SIZE_OFFSET_PTR_ONEOF(structname, fieldname) PB_SIZE_OFFSET_ONEOF(structname, fieldname)
-#define PB_SIZE_OFFSET_PTR_OPTIONAL(structname, fieldname) 0
-#define PB_SIZE_OFFSET_PTR_REPEATED(structname, fieldname) PB_SIZE_OFFSET_REPEATED(structname, fieldname)
-#define PB_SIZE_OFFSET_PTR_FIXARRAY(structname, fieldname) 0
-#define PB_SIZE_OFFSET_CB_REQUIRED(structname, fieldname) 0
-#define PB_SIZE_OFFSET_CB_SINGULAR(structname, fieldname) 0
-#define PB_SIZE_OFFSET_CB_ONEOF(structname, fieldname) PB_SIZE_OFFSET_ONEOF(structname, fieldname)
-#define PB_SIZE_OFFSET_CB_OPTIONAL(structname, fieldname) 0
-#define PB_SIZE_OFFSET_CB_REPEATED(structname, fieldname) 0
-#define PB_SIZE_OFFSET_CB_FIXARRAY(structname, fieldname) 0
+#define PB_SIZE_OFFSET_STATIC(htype, structname, fieldname) PB_SO ## htype(structname, fieldname)
+#define PB_SIZE_OFFSET_POINTER(htype, structname, fieldname) PB_SO_PTR ## htype(structname, fieldname)
+#define PB_SIZE_OFFSET_CALLBACK(htype, structname, fieldname) PB_SO_CB ## htype(structname, fieldname)
+#define PB_SO_PB_HTYPE_REQUIRED(structname, fieldname) 0
+#define PB_SO_PB_HTYPE_SINGULAR(structname, fieldname) 0
+#define PB_SO_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF2(structname, PB_ONEOF_NAME(FULL, fieldname), PB_ONEOF_NAME(UNION, fieldname))
+#define PB_SO_PB_HTYPE_ONEOF2(structname, fullname, unionname) PB_SO_PB_HTYPE_ONEOF3(structname, fullname, unionname)
+#define PB_SO_PB_HTYPE_ONEOF3(structname, fullname, unionname) pb_delta(structname, fullname, which_ ## unionname)
+#define PB_SO_PB_HTYPE_OPTIONAL(structname, fieldname) pb_delta(structname, fieldname, has_ ## fieldname)
+#define PB_SO_PB_HTYPE_REPEATED(structname, fieldname) pb_delta(structname, fieldname, fieldname ## _count)
+#define PB_SO_PB_HTYPE_FIXARRAY(structname, fieldname) 0
+#define PB_SO_PTR_PB_HTYPE_REQUIRED(structname, fieldname) 0
+#define PB_SO_PTR_PB_HTYPE_SINGULAR(structname, fieldname) 0
+#define PB_SO_PTR_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF(structname, fieldname)
+#define PB_SO_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) 0
+#define PB_SO_PTR_PB_HTYPE_REPEATED(structname, fieldname) PB_SO_PB_HTYPE_REPEATED(structname, fieldname)
+#define PB_SO_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) 0
+#define PB_SO_CB_PB_HTYPE_REQUIRED(structname, fieldname) 0
+#define PB_SO_CB_PB_HTYPE_SINGULAR(structname, fieldname) 0
+#define PB_SO_CB_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF(structname, fieldname)
+#define PB_SO_CB_PB_HTYPE_OPTIONAL(structname, fieldname) 0
+#define PB_SO_CB_PB_HTYPE_REPEATED(structname, fieldname) 0
+#define PB_SO_CB_PB_HTYPE_FIXARRAY(structname, fieldname) 0
 
-#define PB_ARRAY_SIZE_STATIC(htype, structname, fieldname) PB_ARRAY_SIZE_ ## htype(structname, fieldname)
-#define PB_ARRAY_SIZE_POINTER(htype, structname, fieldname) PB_ARRAY_SIZE_PTR_ ## htype(structname, fieldname)
+#define PB_ARRAY_SIZE_STATIC(htype, structname, fieldname) PB_AS ## htype(structname, fieldname)
+#define PB_ARRAY_SIZE_POINTER(htype, structname, fieldname) PB_AS_PTR ## htype(structname, fieldname)
 #define PB_ARRAY_SIZE_CALLBACK(htype, structname, fieldname) 1
-#define PB_ARRAY_SIZE_REQUIRED(structname, fieldname) 1
-#define PB_ARRAY_SIZE_SINGULAR(structname, fieldname) 1
-#define PB_ARRAY_SIZE_OPTIONAL(structname, fieldname) 1
-#define PB_ARRAY_SIZE_ONEOF(structname, fieldname) 1
-#define PB_ARRAY_SIZE_REPEATED(structname, fieldname) pb_arraysize(structname, fieldname)
-#define PB_ARRAY_SIZE_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname)
-#define PB_ARRAY_SIZE_PTR_REQUIRED(structname, fieldname) 1
-#define PB_ARRAY_SIZE_PTR_SINGULAR(structname, fieldname) 1
-#define PB_ARRAY_SIZE_PTR_OPTIONAL(structname, fieldname) 1
-#define PB_ARRAY_SIZE_PTR_ONEOF(structname, fieldname) 1
-#define PB_ARRAY_SIZE_PTR_REPEATED(structname, fieldname) 1
-#define PB_ARRAY_SIZE_PTR_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname[0])
+#define PB_AS_PB_HTYPE_REQUIRED(structname, fieldname) 1
+#define PB_AS_PB_HTYPE_SINGULAR(structname, fieldname) 1
+#define PB_AS_PB_HTYPE_OPTIONAL(structname, fieldname) 1
+#define PB_AS_PB_HTYPE_ONEOF(structname, fieldname) 1
+#define PB_AS_PB_HTYPE_REPEATED(structname, fieldname) pb_arraysize(structname, fieldname)
+#define PB_AS_PB_HTYPE_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname)
+#define PB_AS_PTR_PB_HTYPE_REQUIRED(structname, fieldname) 1
+#define PB_AS_PTR_PB_HTYPE_SINGULAR(structname, fieldname) 1
+#define PB_AS_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) 1
+#define PB_AS_PTR_PB_HTYPE_ONEOF(structname, fieldname) 1
+#define PB_AS_PTR_PB_HTYPE_REPEATED(structname, fieldname) 1
+#define PB_AS_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname[0])
 
-#define PB_DATA_SIZE_STATIC(htype, structname, fieldname) PB_DATA_SIZE_ ## htype(structname, fieldname)
-#define PB_DATA_SIZE_POINTER(htype, structname, fieldname) PB_DATA_SIZE_PTR_ ## htype(structname, fieldname)
-#define PB_DATA_SIZE_CALLBACK(htype, structname, fieldname) PB_DATA_SIZE_CB_ ## htype(structname, fieldname)
-#define PB_DATA_SIZE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname))
-#define PB_DATA_SIZE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_PTR_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_PTR_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_PTR_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_PTR_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname)[0])
-#define PB_DATA_SIZE_PTR_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0])
-#define PB_DATA_SIZE_PTR_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0][0])
-#define PB_DATA_SIZE_CB_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_CB_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_CB_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_CB_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname))
-#define PB_DATA_SIZE_CB_REPEATED(structname, fieldname) pb_membersize(structname, fieldname)
-#define PB_DATA_SIZE_CB_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DATA_SIZE_STATIC(htype, structname, fieldname) PB_DS ## htype(structname, fieldname)
+#define PB_DATA_SIZE_POINTER(htype, structname, fieldname) PB_DS_PTR ## htype(structname, fieldname)
+#define PB_DATA_SIZE_CALLBACK(htype, structname, fieldname) PB_DS_CB ## htype(structname, fieldname)
+#define PB_DS_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname))
+#define PB_DS_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PTR_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PTR_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PTR_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname)[0])
+#define PB_DS_PTR_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0])
+#define PB_DS_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0][0])
+#define PB_DS_CB_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_CB_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_CB_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_CB_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname))
+#define PB_DS_CB_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname)
+#define PB_DS_CB_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname)
 
 #define PB_ONEOF_NAME(type, tuple) PB_EXPAND(PB_ONEOF_NAME_ ## type tuple)
 #define PB_ONEOF_NAME_UNION(unionname,membername,fullname) unionname
@@ -607,37 +652,37 @@ struct pb_extension_s {
 #define PB_ONEOF_NAME_FULL(unionname,membername,fullname) fullname
 
 #define PB_GEN_SUBMSG_INFO(structname, atype, htype, ltype, fieldname, tag) \
-    PB_SUBMSG_INFO_ ## htype(ltype, structname, fieldname)
+    PB_SUBMSG_INFO_ ## htype(_PB_LTYPE_ ## ltype, structname, fieldname)
 
-#define PB_SUBMSG_INFO_REQUIRED(ltype, structname, fieldname) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
-#define PB_SUBMSG_INFO_SINGULAR(ltype, structname, fieldname) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
-#define PB_SUBMSG_INFO_OPTIONAL(ltype, structname, fieldname) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
+#define PB_SUBMSG_INFO_REQUIRED(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
+#define PB_SUBMSG_INFO_SINGULAR(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
+#define PB_SUBMSG_INFO_OPTIONAL(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
 #define PB_SUBMSG_INFO_ONEOF(ltype, structname, fieldname) PB_SUBMSG_INFO_ONEOF2(ltype, structname, PB_ONEOF_NAME(UNION, fieldname), PB_ONEOF_NAME(MEMBER, fieldname))
 #define PB_SUBMSG_INFO_ONEOF2(ltype, structname, unionname, membername) PB_SUBMSG_INFO_ONEOF3(ltype, structname, unionname, membername)
-#define PB_SUBMSG_INFO_ONEOF3(ltype, structname, unionname, membername) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## unionname ## _ ## membername ## _MSGTYPE)
-#define PB_SUBMSG_INFO_REPEATED(ltype, structname, fieldname) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
-#define PB_SUBMSG_INFO_FIXARRAY(ltype, structname, fieldname) PB_SUBMSG_INFO_ ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
-#define PB_SUBMSG_INFO_BOOL(t)
-#define PB_SUBMSG_INFO_BYTES(t)
-#define PB_SUBMSG_INFO_DOUBLE(t)
-#define PB_SUBMSG_INFO_ENUM(t)
-#define PB_SUBMSG_INFO_UENUM(t)
-#define PB_SUBMSG_INFO_FIXED32(t)
-#define PB_SUBMSG_INFO_FIXED64(t)
-#define PB_SUBMSG_INFO_FLOAT(t)
-#define PB_SUBMSG_INFO_INT32(t)
-#define PB_SUBMSG_INFO_INT64(t)
-#define PB_SUBMSG_INFO_MESSAGE(t)  PB_SUBMSG_DESCRIPTOR(t)
-#define PB_SUBMSG_INFO_MSG_W_CB(t) PB_SUBMSG_DESCRIPTOR(t)
-#define PB_SUBMSG_INFO_SFIXED32(t)
-#define PB_SUBMSG_INFO_SFIXED64(t)
-#define PB_SUBMSG_INFO_SINT32(t)
-#define PB_SUBMSG_INFO_SINT64(t)
-#define PB_SUBMSG_INFO_STRING(t)
-#define PB_SUBMSG_INFO_UINT32(t)
-#define PB_SUBMSG_INFO_UINT64(t)
-#define PB_SUBMSG_INFO_EXTENSION(t)
-#define PB_SUBMSG_INFO_FIXED_LENGTH_BYTES(t)
+#define PB_SUBMSG_INFO_ONEOF3(ltype, structname, unionname, membername) PB_SI ## ltype(structname ## _ ## unionname ## _ ## membername ## _MSGTYPE)
+#define PB_SUBMSG_INFO_REPEATED(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
+#define PB_SUBMSG_INFO_FIXARRAY(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE)
+#define PB_SI_PB_LTYPE_BOOL(t)
+#define PB_SI_PB_LTYPE_BYTES(t)
+#define PB_SI_PB_LTYPE_DOUBLE(t)
+#define PB_SI_PB_LTYPE_ENUM(t)
+#define PB_SI_PB_LTYPE_UENUM(t)
+#define PB_SI_PB_LTYPE_FIXED32(t)
+#define PB_SI_PB_LTYPE_FIXED64(t)
+#define PB_SI_PB_LTYPE_FLOAT(t)
+#define PB_SI_PB_LTYPE_INT32(t)
+#define PB_SI_PB_LTYPE_INT64(t)
+#define PB_SI_PB_LTYPE_MESSAGE(t)  PB_SUBMSG_DESCRIPTOR(t)
+#define PB_SI_PB_LTYPE_MSG_W_CB(t) PB_SUBMSG_DESCRIPTOR(t)
+#define PB_SI_PB_LTYPE_SFIXED32(t)
+#define PB_SI_PB_LTYPE_SFIXED64(t)
+#define PB_SI_PB_LTYPE_SINT32(t)
+#define PB_SI_PB_LTYPE_SINT64(t)
+#define PB_SI_PB_LTYPE_STRING(t)
+#define PB_SI_PB_LTYPE_UINT32(t)
+#define PB_SI_PB_LTYPE_UINT64(t)
+#define PB_SI_PB_LTYPE_EXTENSION(t)
+#define PB_SI_PB_LTYPE_FIXED_LENGTH_BYTES(t)
 #define PB_SUBMSG_DESCRIPTOR(t)    &(t ## _msg),
 
 /* The field descriptors use a variable width format, with width of either
@@ -726,37 +771,37 @@ struct pb_extension_s {
  * The generator will give explicit size argument when it knows that a message
  * structure grows beyond 1-word format limits.
  */
-#define PB_FIELDINFO_WIDTH_AUTO(atype, htype, ltype) PB_FIELDINFO_WIDTH_ ## atype(htype, ltype)
-#define PB_FIELDINFO_WIDTH_STATIC(htype, ltype) PB_FIELDINFO_WIDTH_ ## htype(ltype)
-#define PB_FIELDINFO_WIDTH_POINTER(htype, ltype) PB_FIELDINFO_WIDTH_ ## htype(ltype)
-#define PB_FIELDINFO_WIDTH_CALLBACK(htype, ltype) 2
-#define PB_FIELDINFO_WIDTH_REQUIRED(ltype) PB_FIELDINFO_WIDTH_ ## ltype
-#define PB_FIELDINFO_WIDTH_SINGULAR(ltype) PB_FIELDINFO_WIDTH_ ## ltype
-#define PB_FIELDINFO_WIDTH_OPTIONAL(ltype) PB_FIELDINFO_WIDTH_ ## ltype
-#define PB_FIELDINFO_WIDTH_ONEOF(ltype) PB_FIELDINFO_WIDTH_ ## ltype
-#define PB_FIELDINFO_WIDTH_REPEATED(ltype) 2
-#define PB_FIELDINFO_WIDTH_FIXARRAY(ltype) 2
-#define PB_FIELDINFO_WIDTH_BOOL      1
-#define PB_FIELDINFO_WIDTH_BYTES     2
-#define PB_FIELDINFO_WIDTH_DOUBLE    1
-#define PB_FIELDINFO_WIDTH_ENUM      1
-#define PB_FIELDINFO_WIDTH_UENUM     1
-#define PB_FIELDINFO_WIDTH_FIXED32   1
-#define PB_FIELDINFO_WIDTH_FIXED64   1
-#define PB_FIELDINFO_WIDTH_FLOAT     1
-#define PB_FIELDINFO_WIDTH_INT32     1
-#define PB_FIELDINFO_WIDTH_INT64     1
-#define PB_FIELDINFO_WIDTH_MESSAGE   2
-#define PB_FIELDINFO_WIDTH_MSG_W_CB  2
-#define PB_FIELDINFO_WIDTH_SFIXED32  1
-#define PB_FIELDINFO_WIDTH_SFIXED64  1
-#define PB_FIELDINFO_WIDTH_SINT32    1
-#define PB_FIELDINFO_WIDTH_SINT64    1
-#define PB_FIELDINFO_WIDTH_STRING    2
-#define PB_FIELDINFO_WIDTH_UINT32    1
-#define PB_FIELDINFO_WIDTH_UINT64    1
-#define PB_FIELDINFO_WIDTH_EXTENSION 1
-#define PB_FIELDINFO_WIDTH_FIXED_LENGTH_BYTES 2
+#define PB_FIELDINFO_WIDTH_AUTO(atype, htype, ltype) PB_FI_WIDTH ## atype(htype, ltype)
+#define PB_FI_WIDTH_PB_ATYPE_STATIC(htype, ltype) PB_FI_WIDTH ## htype(ltype)
+#define PB_FI_WIDTH_PB_ATYPE_POINTER(htype, ltype) PB_FI_WIDTH ## htype(ltype)
+#define PB_FI_WIDTH_PB_ATYPE_CALLBACK(htype, ltype) 2
+#define PB_FI_WIDTH_PB_HTYPE_REQUIRED(ltype) PB_FI_WIDTH ## ltype
+#define PB_FI_WIDTH_PB_HTYPE_SINGULAR(ltype) PB_FI_WIDTH ## ltype
+#define PB_FI_WIDTH_PB_HTYPE_OPTIONAL(ltype) PB_FI_WIDTH ## ltype
+#define PB_FI_WIDTH_PB_HTYPE_ONEOF(ltype) PB_FI_WIDTH ## ltype
+#define PB_FI_WIDTH_PB_HTYPE_REPEATED(ltype) 2
+#define PB_FI_WIDTH_PB_HTYPE_FIXARRAY(ltype) 2
+#define PB_FI_WIDTH_PB_LTYPE_BOOL      1
+#define PB_FI_WIDTH_PB_LTYPE_BYTES     2
+#define PB_FI_WIDTH_PB_LTYPE_DOUBLE    1
+#define PB_FI_WIDTH_PB_LTYPE_ENUM      1
+#define PB_FI_WIDTH_PB_LTYPE_UENUM     1
+#define PB_FI_WIDTH_PB_LTYPE_FIXED32   1
+#define PB_FI_WIDTH_PB_LTYPE_FIXED64   1
+#define PB_FI_WIDTH_PB_LTYPE_FLOAT     1
+#define PB_FI_WIDTH_PB_LTYPE_INT32     1
+#define PB_FI_WIDTH_PB_LTYPE_INT64     1
+#define PB_FI_WIDTH_PB_LTYPE_MESSAGE   2
+#define PB_FI_WIDTH_PB_LTYPE_MSG_W_CB  2
+#define PB_FI_WIDTH_PB_LTYPE_SFIXED32  1
+#define PB_FI_WIDTH_PB_LTYPE_SFIXED64  1
+#define PB_FI_WIDTH_PB_LTYPE_SINT32    1
+#define PB_FI_WIDTH_PB_LTYPE_SINT64    1
+#define PB_FI_WIDTH_PB_LTYPE_STRING    2
+#define PB_FI_WIDTH_PB_LTYPE_UINT32    1
+#define PB_FI_WIDTH_PB_LTYPE_UINT64    1
+#define PB_FI_WIDTH_PB_LTYPE_EXTENSION 1
+#define PB_FI_WIDTH_PB_LTYPE_FIXED_LENGTH_BYTES 2
 
 /* The mapping from protobuf types to LTYPEs is done using these macros. */
 #define PB_LTYPE_MAP_BOOL               PB_LTYPE_BOOL

lib/nanopb/include/pb_common.h

@@ -32,6 +32,10 @@ bool pb_field_iter_next(pb_field_iter_t *iter);
  * Returns false if no such field exists. */
 bool pb_field_iter_find(pb_field_iter_t *iter, uint32_t tag);
 
+/* Find a field with type PB_LTYPE_EXTENSION, or return false if not found.
+ * There can be only one extension range field per message. */
+bool pb_field_iter_find_extension(pb_field_iter_t *iter);
+
 #ifdef PB_VALIDATE_UTF8
 /* Validate UTF-8 text string */
 bool pb_validate_utf8(const char *s);

lib/nanopb/include/pb_decode.h

@@ -113,6 +113,9 @@ bool pb_decode_ex(pb_istream_t *stream, const pb_msgdesc_t *fields, void *dest_s
  * pb_decode() returns with an error, the message is already released.
  */
 void pb_release(const pb_msgdesc_t *fields, void *dest_struct);
+#else
+/* Allocation is not supported, so release is no-op */
+#define pb_release(fields, dest_struct) PB_UNUSED(fields); PB_UNUSED(dest_struct);
 #endif
 
 
@@ -121,11 +124,14 @@ void pb_release(const pb_msgdesc_t *fields, void *dest_struct);
  **************************************/
 
 /* Create an input stream for reading from a memory buffer.
+ *
+ * msglen should be the actual length of the message, not the full size of
+ * allocated buffer.
  *
  * Alternatively, you can use a custom stream that reads directly from e.g.
  * a file or a network socket.
  */
-pb_istream_t pb_istream_from_buffer(const pb_byte_t *buf, size_t bufsize);
+pb_istream_t pb_istream_from_buffer(const pb_byte_t *buf, size_t msglen);
 
 /* Function to read from a pb_istream_t. You can use this if you need to
  * read some custom header data, or to read data in field callbacks.

lib/nanopb/include/pb_encode.h

@@ -132,7 +132,7 @@ bool pb_write(pb_ostream_t *stream, const pb_byte_t *buf, size_t count);
  * structure. Call this from the callback before writing out field contents. */
 bool pb_encode_tag_for_field(pb_ostream_t *stream, const pb_field_iter_t *field);
 
-/* Encode field header by manually specifing wire type. You need to use this
+/* Encode field header by manually specifying wire type. You need to use this
  * if you want to write out packed arrays from a callback field. */
 bool pb_encode_tag(pb_ostream_t *stream, pb_wire_type_t wiretype, uint32_t field_number);
 

lib/nanopb/src/pb_common.c

@@ -9,89 +9,102 @@ static bool load_descriptor_values(pb_field_iter_t *iter)
 {
     uint32_t word0;
     uint32_t data_offset;
-    uint_least8_t format;
     int_least8_t size_offset;
 
     if (iter->index >= iter->descriptor->field_count)
         return false;
 
     word0 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index]);
-    format = word0 & 3;
-    iter->tag = (pb_size_t)((word0 >> 2) & 0x3F);
     iter->type = (pb_type_t)((word0 >> 8) & 0xFF);
 
-    if (format == 0)
+    switch(word0 & 3)
     {
-        /* 1-word format */
-        iter->array_size = 1;
-        size_offset = (int_least8_t)((word0 >> 24) & 0x0F);
-        data_offset = (word0 >> 16) & 0xFF;
-        iter->data_size = (pb_size_t)((word0 >> 28) & 0x0F);
-    }
-    else if (format == 1)
-    {
-        /* 2-word format */
-        uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
+        case 0: {
+            /* 1-word format */
+            iter->array_size = 1;
+            iter->tag = (pb_size_t)((word0 >> 2) & 0x3F);
+            size_offset = (int_least8_t)((word0 >> 24) & 0x0F);
+            data_offset = (word0 >> 16) & 0xFF;
+            iter->data_size = (pb_size_t)((word0 >> 28) & 0x0F);
+            break;
+        }
 
-        iter->array_size = (pb_size_t)((word0 >> 16) & 0x0FFF);
-        iter->tag = (pb_size_t)(iter->tag | ((word1 >> 28) << 6));
-        size_offset = (int_least8_t)((word0 >> 28) & 0x0F);
-        data_offset = word1 & 0xFFFF;
-        iter->data_size = (pb_size_t)((word1 >> 16) & 0x0FFF);
-    }
-    else if (format == 2)
-    {
-        /* 4-word format */
-        uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
-        uint32_t word2 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 2]);
-        uint32_t word3 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 3]);
+        case 1: {
+            /* 2-word format */
+            uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
 
-        iter->array_size = (pb_size_t)(word0 >> 16);
-        iter->tag = (pb_size_t)(iter->tag | ((word1 >> 8) << 6));
-        size_offset = (int_least8_t)(word1 & 0xFF);
-        data_offset = word2;
-        iter->data_size = (pb_size_t)word3;
-    }
-    else
-    {
-        /* 8-word format */
-        uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
-        uint32_t word2 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 2]);
-        uint32_t word3 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 3]);
-        uint32_t word4 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 4]);
+            iter->array_size = (pb_size_t)((word0 >> 16) & 0x0FFF);
+            iter->tag = (pb_size_t)(((word0 >> 2) & 0x3F) | ((word1 >> 28) << 6));
+            size_offset = (int_least8_t)((word0 >> 28) & 0x0F);
+            data_offset = word1 & 0xFFFF;
+            iter->data_size = (pb_size_t)((word1 >> 16) & 0x0FFF);
+            break;
+        }
 
-        iter->array_size = (pb_size_t)word4;
-        iter->tag = (pb_size_t)(iter->tag | ((word1 >> 8) << 6));
-        size_offset = (int_least8_t)(word1 & 0xFF);
-        data_offset = word2;
-        iter->data_size = (pb_size_t)word3;
+        case 2: {
+            /* 4-word format */
+            uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
+            uint32_t word2 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 2]);
+            uint32_t word3 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 3]);
+
+            iter->array_size = (pb_size_t)(word0 >> 16);
+            iter->tag = (pb_size_t)(((word0 >> 2) & 0x3F) | ((word1 >> 8) << 6));
+            size_offset = (int_least8_t)(word1 & 0xFF);
+            data_offset = word2;
+            iter->data_size = (pb_size_t)word3;
+            break;
+        }
+
+        default: {
+            /* 8-word format */
+            uint32_t word1 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 1]);
+            uint32_t word2 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 2]);
+            uint32_t word3 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 3]);
+            uint32_t word4 = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index + 4]);
+
+            iter->array_size = (pb_size_t)word4;
+            iter->tag = (pb_size_t)(((word0 >> 2) & 0x3F) | ((word1 >> 8) << 6));
+            size_offset = (int_least8_t)(word1 & 0xFF);
+            data_offset = word2;
+            iter->data_size = (pb_size_t)word3;
+            break;
+        }
     }
 
-    iter->pField = (char*)iter->message + data_offset;
-
-    if (size_offset)
-    {
-        iter->pSize = (char*)iter->pField - size_offset;
-    }
-    else if (PB_HTYPE(iter->type) == PB_HTYPE_REPEATED &&
-             (PB_ATYPE(iter->type) == PB_ATYPE_STATIC ||
-              PB_ATYPE(iter->type) == PB_ATYPE_POINTER))
-    {
-        /* Fixed count array */
-        iter->pSize = &iter->array_size;
-    }
-    else
+    if (!iter->message)
     {
+        /* Avoid doing arithmetic on null pointers, it is undefined */
+        iter->pField = NULL;
         iter->pSize = NULL;
     }
-
-    if (PB_ATYPE(iter->type) == PB_ATYPE_POINTER && iter->pField != NULL)
-    {
-        iter->pData = *(void**)iter->pField;
-    }
     else
     {
-        iter->pData = iter->pField;
+        iter->pField = (char*)iter->message + data_offset;
+
+        if (size_offset)
+        {
+            iter->pSize = (char*)iter->pField - size_offset;
+        }
+        else if (PB_HTYPE(iter->type) == PB_HTYPE_REPEATED &&
+                 (PB_ATYPE(iter->type) == PB_ATYPE_STATIC ||
+                  PB_ATYPE(iter->type) == PB_ATYPE_POINTER))
+        {
+            /* Fixed count array */
+            iter->pSize = &iter->array_size;
+        }
+        else
+        {
+            iter->pSize = NULL;
+        }
+
+        if (PB_ATYPE(iter->type) == PB_ATYPE_POINTER && iter->pField != NULL)
+        {
+            iter->pData = *(void**)iter->pField;
+        }
+        else
+        {
+            iter->pData = iter->pField;
+        }
     }
 
     if (PB_LTYPE_IS_SUBMSG(iter->type))
@@ -130,17 +143,13 @@ static void advance_iterator(pb_field_iter_t *iter)
         pb_type_t prev_type = (prev_descriptor >> 8) & 0xFF;
         pb_size_t descriptor_len = (pb_size_t)(1 << (prev_descriptor & 3));
 
+        /* Add to fields.
+         * The cast to pb_size_t is needed to avoid -Wconversion warning.
+         * Because the data is is constants from generator, there is no danger of overflow.
+         */
         iter->field_info_index = (pb_size_t)(iter->field_info_index + descriptor_len);
-
-        if (PB_HTYPE(prev_type) == PB_HTYPE_REQUIRED)
-        {
-            iter->required_field_index++;
-        }
-
-        if (PB_LTYPE_IS_SUBMSG(prev_type))
-        {
-            iter->submessage_index++;
-        }
+        iter->required_field_index = (pb_size_t)(iter->required_field_index + (PB_HTYPE(prev_type) == PB_HTYPE_REQUIRED));
+        iter->submessage_index = (pb_size_t)(iter->submessage_index + PB_LTYPE_IS_SUBMSG(prev_type));
     }
 }
 
@@ -189,11 +198,23 @@ bool pb_field_iter_find(pb_field_iter_t *iter, uint32_t tag)
     {
         return true; /* Nothing to do, correct field already. */
     }
+    else if (tag > iter->descriptor->largest_tag)
+    {
+        return false;
+    }
     else
     {
         pb_size_t start = iter->index;
         uint32_t fieldinfo;
 
+        if (tag < iter->tag)
+        {
+            /* Fields are in tag number order, so we know that tag is between
+             * 0 and our start position. Setting index to end forces
+             * advance_iterator() call below to restart from beginning. */
+            iter->index = iter->descriptor->field_count;
+        }
+
         do
         {
             /* Advance iterator but don't load values yet */
@@ -222,6 +243,37 @@ bool pb_field_iter_find(pb_field_iter_t *iter, uint32_t tag)
     }
 }
 
+bool pb_field_iter_find_extension(pb_field_iter_t *iter)
+{
+    if (PB_LTYPE(iter->type) == PB_LTYPE_EXTENSION)
+    {
+        return true;
+    }
+    else
+    {
+        pb_size_t start = iter->index;
+        uint32_t fieldinfo;
+
+        do
+        {
+            /* Advance iterator but don't load values yet */
+            advance_iterator(iter);
+
+            /* Do fast check for field type */
+            fieldinfo = PB_PROGMEM_READU32(iter->descriptor->field_info[iter->field_info_index]);
+
+            if (PB_LTYPE((fieldinfo >> 8) & 0xFF) == PB_LTYPE_EXTENSION)
+            {
+                return load_descriptor_values(iter);
+            }
+        } while (iter->index != start);
+
+        /* Searched all the way back to start, and found nothing. */
+        (void)load_descriptor_values(iter);
+        return false;
+    }
+}
+
 static void *pb_const_cast(const void *p)
 {
     /* Note: this casts away const, in order to use the common field iterator

lib/nanopb/src/pb_decode.c

@@ -24,19 +24,17 @@
 static bool checkreturn buf_read(pb_istream_t *stream, pb_byte_t *buf, size_t count);
 static bool checkreturn pb_decode_varint32_eof(pb_istream_t *stream, uint32_t *dest, bool *eof);
 static bool checkreturn read_raw_value(pb_istream_t *stream, pb_wire_type_t wire_type, pb_byte_t *buf, size_t *size);
-static bool checkreturn check_wire_type(pb_wire_type_t wire_type, pb_field_iter_t *field);
-static bool checkreturn decode_basic_field(pb_istream_t *stream, pb_field_iter_t *field);
+static bool checkreturn decode_basic_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field);
 static bool checkreturn decode_static_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field);
 static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field);
 static bool checkreturn decode_callback_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field);
 static bool checkreturn decode_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field);
 static bool checkreturn default_extension_decoder(pb_istream_t *stream, pb_extension_t *extension, uint32_t tag, pb_wire_type_t wire_type);
-static bool checkreturn decode_extension(pb_istream_t *stream, uint32_t tag, pb_wire_type_t wire_type, pb_field_iter_t *iter);
-static bool checkreturn find_extension_field(pb_field_iter_t *iter);
+static bool checkreturn decode_extension(pb_istream_t *stream, uint32_t tag, pb_wire_type_t wire_type, pb_extension_t *extension);
+static bool pb_field_set_to_default(pb_field_iter_t *field);
 static bool pb_message_set_to_defaults(pb_field_iter_t *iter);
 static bool checkreturn pb_dec_bool(pb_istream_t *stream, const pb_field_iter_t *field);
 static bool checkreturn pb_dec_varint(pb_istream_t *stream, const pb_field_iter_t *field);
-static bool checkreturn pb_dec_fixed(pb_istream_t *stream, const pb_field_iter_t *field);
 static bool checkreturn pb_dec_bytes(pb_istream_t *stream, const pb_field_iter_t *field);
 static bool checkreturn pb_dec_string(pb_istream_t *stream, const pb_field_iter_t *field);
 static bool checkreturn pb_dec_submessage(pb_istream_t *stream, const pb_field_iter_t *field);
@@ -59,6 +57,8 @@ static void pb_release_single_field(pb_field_iter_t *field);
 #define pb_uint64_t uint64_t
 #endif
 
+#define PB_WT_PACKED ((pb_wire_type_t)0xFF)
+
 typedef struct {
     uint32_t bitfield[(PB_MAX_REQUIRED_FIELDS + 31) / 32];
 } pb_fields_seen_t;
@@ -139,7 +139,7 @@ static bool checkreturn pb_readbyte(pb_istream_t *stream, pb_byte_t *buf)
     return true;    
 }
 
-pb_istream_t pb_istream_from_buffer(const pb_byte_t *buf, size_t bufsize)
+pb_istream_t pb_istream_from_buffer(const pb_byte_t *buf, size_t msglen)
 {
     pb_istream_t stream;
     /* Cast away the const from buf without a compiler error.  We are
@@ -156,7 +156,7 @@ pb_istream_t pb_istream_from_buffer(const pb_byte_t *buf, size_t bufsize)
 #endif
     state.c_state = buf;
     stream.state = state.state;
-    stream.bytes_left = bufsize;
+    stream.bytes_left = msglen;
 #ifndef PB_NO_ERRMSG
     stream.errmsg = NULL;
 #endif
@@ -205,8 +205,10 @@ static bool checkreturn pb_decode_varint32_eof(pb_istream_t *stream, uint32_t *d
             {
                 /* Note: The varint could have trailing 0x80 bytes, or 0xFF for negative. */
                 pb_byte_t sign_extension = (bitpos < 63) ? 0xFF : 0x01;
-                
-                if ((byte & 0x7F) != 0x00 && ((result >> 31) == 0 || byte != sign_extension))
+                bool valid_extension = ((byte & 0x7F) == 0x00 ||
+                         ((result >> 31) != 0 && byte == sign_extension));
+
+                if (bitpos >= 64 || !valid_extension)
                 {
                     PB_RETURN_ERROR(stream, "varint overflow");
                 }
@@ -388,61 +390,70 @@ bool checkreturn pb_close_string_substream(pb_istream_t *stream, pb_istream_t *s
  * Decode a single field *
  *************************/
 
-static bool checkreturn check_wire_type(pb_wire_type_t wire_type, pb_field_iter_t *field)
+static bool checkreturn decode_basic_field(pb_istream_t *stream, pb_wire_type_t wire_type, pb_field_iter_t *field)
 {
     switch (PB_LTYPE(field->type))
     {
         case PB_LTYPE_BOOL:
-        case PB_LTYPE_VARINT:
-        case PB_LTYPE_UVARINT:
-        case PB_LTYPE_SVARINT:
-            return wire_type == PB_WT_VARINT;
+            if (wire_type != PB_WT_VARINT && wire_type != PB_WT_PACKED)
+                PB_RETURN_ERROR(stream, "wrong wire type");
 
-        case PB_LTYPE_FIXED32:
-            return wire_type == PB_WT_32BIT;
-
-        case PB_LTYPE_FIXED64:
-            return wire_type == PB_WT_64BIT;
-
-        case PB_LTYPE_BYTES:
-        case PB_LTYPE_STRING:
-        case PB_LTYPE_SUBMESSAGE:
-        case PB_LTYPE_SUBMSG_W_CB:
-        case PB_LTYPE_FIXED_LENGTH_BYTES:
-            return wire_type == PB_WT_STRING;
-
-        default:
-            return false;
-    }
-}
-
-static bool checkreturn decode_basic_field(pb_istream_t *stream, pb_field_iter_t *field)
-{
-    switch (PB_LTYPE(field->type))
-    {
-        case PB_LTYPE_BOOL:
             return pb_dec_bool(stream, field);
 
         case PB_LTYPE_VARINT:
         case PB_LTYPE_UVARINT:
         case PB_LTYPE_SVARINT:
+            if (wire_type != PB_WT_VARINT && wire_type != PB_WT_PACKED)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
             return pb_dec_varint(stream, field);
 
         case PB_LTYPE_FIXED32:
+            if (wire_type != PB_WT_32BIT && wire_type != PB_WT_PACKED)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
+            return pb_decode_fixed32(stream, field->pData);
+
         case PB_LTYPE_FIXED64:
-            return pb_dec_fixed(stream, field);
+            if (wire_type != PB_WT_64BIT && wire_type != PB_WT_PACKED)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
+#ifdef PB_CONVERT_DOUBLE_FLOAT
+            if (field->data_size == sizeof(float))
+            {
+                return pb_decode_double_as_float(stream, (float*)field->pData);
+            }
+#endif
+
+#ifdef PB_WITHOUT_64BIT
+            PB_RETURN_ERROR(stream, "invalid data_size");
+#else
+            return pb_decode_fixed64(stream, field->pData);
+#endif
 
         case PB_LTYPE_BYTES:
+            if (wire_type != PB_WT_STRING)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
             return pb_dec_bytes(stream, field);
 
         case PB_LTYPE_STRING:
+            if (wire_type != PB_WT_STRING)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
             return pb_dec_string(stream, field);
 
         case PB_LTYPE_SUBMESSAGE:
         case PB_LTYPE_SUBMSG_W_CB:
+            if (wire_type != PB_WT_STRING)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
             return pb_dec_submessage(stream, field);
 
         case PB_LTYPE_FIXED_LENGTH_BYTES:
+            if (wire_type != PB_WT_STRING)
+                PB_RETURN_ERROR(stream, "wrong wire type");
+
             return pb_dec_fixed_length_bytes(stream, field);
 
         default:
@@ -455,18 +466,12 @@ static bool checkreturn decode_static_field(pb_istream_t *stream, pb_wire_type_t
     switch (PB_HTYPE(field->type))
     {
         case PB_HTYPE_REQUIRED:
-            if (!check_wire_type(wire_type, field))
-                PB_RETURN_ERROR(stream, "wrong wire type");
-
-            return decode_basic_field(stream, field);
+            return decode_basic_field(stream, wire_type, field);
             
         case PB_HTYPE_OPTIONAL:
-            if (!check_wire_type(wire_type, field))
-                PB_RETURN_ERROR(stream, "wrong wire type");
-
             if (field->pSize != NULL)
                 *(bool*)field->pSize = true;
-            return decode_basic_field(stream, field);
+            return decode_basic_field(stream, wire_type, field);
     
         case PB_HTYPE_REPEATED:
             if (wire_type == PB_WT_STRING
@@ -483,7 +488,7 @@ static bool checkreturn decode_static_field(pb_istream_t *stream, pb_wire_type_t
 
                 while (substream.bytes_left > 0 && *size < field->array_size)
                 {
-                    if (!decode_basic_field(&substream, field))
+                    if (!decode_basic_field(&substream, PB_WT_PACKED, field))
                     {
                         status = false;
                         break;
@@ -505,18 +510,15 @@ static bool checkreturn decode_static_field(pb_istream_t *stream, pb_wire_type_t
                 pb_size_t *size = (pb_size_t*)field->pSize;
                 field->pData = (char*)field->pField + field->data_size * (*size);
 
-                if (!check_wire_type(wire_type, field))
-                    PB_RETURN_ERROR(stream, "wrong wire type");
-
                 if ((*size)++ >= field->array_size)
                     PB_RETURN_ERROR(stream, "array overflow");
 
-                return decode_basic_field(stream, field);
+                return decode_basic_field(stream, wire_type, field);
             }
 
         case PB_HTYPE_ONEOF:
-            *(pb_size_t*)field->pSize = field->tag;
-            if (PB_LTYPE_IS_SUBMSG(field->type))
+            if (PB_LTYPE_IS_SUBMSG(field->type) &&
+                *(pb_size_t*)field->pSize != field->tag)
             {
                 /* We memset to zero so that any callbacks are set to NULL.
                  * This is because the callbacks might otherwise have values
@@ -526,12 +528,14 @@ static bool checkreturn decode_static_field(pb_istream_t *stream, pb_wire_type_t
                  * that can set the fields before submessage is decoded.
                  * pb_dec_submessage() will set any default values. */
                 memset(field->pData, 0, (size_t)field->data_size);
+
+                /* Set default values for the submessage fields. */
+                if (!pb_field_set_to_default(field))
+                    PB_RETURN_ERROR(stream, "failed to set defaults");
             }
+            *(pb_size_t*)field->pSize = field->tag;
 
-            if (!check_wire_type(wire_type, field))
-                PB_RETURN_ERROR(stream, "wrong wire type");
-
-            return decode_basic_field(stream, field);
+            return decode_basic_field(stream, wire_type, field);
 
         default:
             PB_RETURN_ERROR(stream, "invalid field type");
@@ -599,14 +603,8 @@ static void initialize_pointer_field(void *pItem, pb_field_iter_t *field)
     else if (PB_LTYPE_IS_SUBMSG(field->type))
     {
         /* We memset to zero so that any callbacks are set to NULL.
-         * Then set any default values. */
-        pb_field_iter_t submsg_iter;
+         * Default values will be set by pb_dec_submessage(). */
         memset(pItem, 0, field->data_size);
-
-        if (pb_field_iter_begin(&submsg_iter, field->submsg_desc, pItem))
-        {
-            (void)pb_message_set_to_defaults(&submsg_iter);
-        }
     }
 }
 #endif
@@ -623,9 +621,6 @@ static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_
         case PB_HTYPE_REQUIRED:
         case PB_HTYPE_OPTIONAL:
         case PB_HTYPE_ONEOF:
-            if (!check_wire_type(wire_type, field))
-                PB_RETURN_ERROR(stream, "wrong wire type");
-
             if (PB_LTYPE_IS_SUBMSG(field->type) && *(void**)field->pField != NULL)
             {
                 /* Duplicate field, have to release the old allocation first. */
@@ -643,7 +638,7 @@ static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_
             {
                 /* pb_dec_string and pb_dec_bytes handle allocation themselves */
                 field->pData = field->pField;
-                return decode_basic_field(stream, field);
+                return decode_basic_field(stream, wire_type, field);
             }
             else
             {
@@ -652,7 +647,7 @@ static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_
                 
                 field->pData = *(void**)field->pField;
                 initialize_pointer_field(field->pData, field);
-                return decode_basic_field(stream, field);
+                return decode_basic_field(stream, wire_type, field);
             }
     
         case PB_HTYPE_REPEATED:
@@ -700,7 +695,7 @@ static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_
                     /* Decode the array entry */
                     field->pData = *(char**)field->pField + field->data_size * (*size);
                     initialize_pointer_field(field->pData, field);
-                    if (!decode_basic_field(&substream, field))
+                    if (!decode_basic_field(&substream, PB_WT_PACKED, field))
                     {
                         status = false;
                         break;
@@ -721,16 +716,13 @@ static bool checkreturn decode_pointer_field(pb_istream_t *stream, pb_wire_type_
                 if (*size == PB_SIZE_MAX)
                     PB_RETURN_ERROR(stream, "too many array entries");
                 
-                if (!check_wire_type(wire_type, field))
-                    PB_RETURN_ERROR(stream, "wrong wire type");
-
                 if (!allocate_field(stream, field->pField, field->data_size, (size_t)(*size + 1)))
                     return false;
             
                 field->pData = *(char**)field->pField + field->data_size * (*size);
                 (*size)++;
                 initialize_pointer_field(field->pData, field);
-                return decode_basic_field(stream, field);
+                return decode_basic_field(stream, wire_type, field);
             }
 
         default:
@@ -821,7 +813,7 @@ static bool checkreturn default_extension_decoder(pb_istream_t *stream,
     if (!pb_field_iter_begin_extension(&iter, extension))
         PB_RETURN_ERROR(stream, "invalid extension");
 
-    if (iter.tag != tag)
+    if (iter.tag != tag || !iter.message)
         return true;
 
     extension->found = true;
@@ -831,9 +823,8 @@ static bool checkreturn default_extension_decoder(pb_istream_t *stream,
 /* Try to decode an unknown field as an extension field. Tries each extension
  * decoder in turn, until one of them handles the field or loop ends. */
 static bool checkreturn decode_extension(pb_istream_t *stream,
-    uint32_t tag, pb_wire_type_t wire_type, pb_field_iter_t *iter)
+    uint32_t tag, pb_wire_type_t wire_type, pb_extension_t *extension)
 {
-    pb_extension_t *extension = *(pb_extension_t* const *)iter->pData;
     size_t pos = stream->bytes_left;
     
     while (extension != NULL && pos == stream->bytes_left)
@@ -853,22 +844,6 @@ static bool checkreturn decode_extension(pb_istream_t *stream,
     return true;
 }
 
-/* Step through the iterator until an extension field is found or until all
- * entries have been checked. There can be only one extension field per
- * message. Returns false if no extension field is found. */
-static bool checkreturn find_extension_field(pb_field_iter_t *iter)
-{
-    pb_size_t start = iter->index;
-
-    do {
-        if (PB_LTYPE(iter->type) == PB_LTYPE_EXTENSION)
-            return true;
-        (void)pb_field_iter_next(iter);
-    } while (iter->index != start);
-    
-    return false;
-}
-
 /* Initialize message fields to default values, recursively */
 static bool pb_field_set_to_default(pb_field_iter_t *field)
 {
@@ -910,9 +885,14 @@ static bool pb_field_set_to_default(pb_field_iter_t *field)
 
         if (init_data)
         {
-            if (PB_LTYPE_IS_SUBMSG(field->type))
+            if (PB_LTYPE_IS_SUBMSG(field->type) &&
+                (field->submsg_desc->default_value != NULL ||
+                 field->submsg_desc->field_callback != NULL ||
+                 field->submsg_desc->submsg_info[0] != NULL))
             {
-                /* Initialize submessage to defaults */
+                /* Initialize submessage to defaults.
+                 * Only needed if it has default values
+                 * or callback/submessage fields. */
                 pb_field_iter_t submsg_iter;
                 if (pb_field_iter_begin(&submsg_iter, field->submsg_desc, field->pData))
                 {
@@ -989,6 +969,7 @@ static bool pb_message_set_to_defaults(pb_field_iter_t *iter)
 static bool checkreturn pb_decode_inner(pb_istream_t *stream, const pb_msgdesc_t *fields, void *dest_struct, unsigned int flags)
 {
     uint32_t extension_range_start = 0;
+    pb_extension_t *extensions = NULL;
 
     /* 'fixed_count_field' and 'fixed_count_size' track position of a repeated fixed
      * count field. This can only handle _one_ repeated fixed count field that
@@ -1040,25 +1021,31 @@ static bool checkreturn pb_decode_inner(pb_istream_t *stream, const pb_msgdesc_t
         if (!pb_field_iter_find(&iter, tag) || PB_LTYPE(iter.type) == PB_LTYPE_EXTENSION)
         {
             /* No match found, check if it matches an extension. */
+            if (extension_range_start == 0)
+            {
+                if (pb_field_iter_find_extension(&iter))
+                {
+                    extensions = *(pb_extension_t* const *)iter.pData;
+                    extension_range_start = iter.tag;
+                }
+
+                if (!extensions)
+                {
+                    extension_range_start = (uint32_t)-1;
+                }
+            }
+
             if (tag >= extension_range_start)
             {
-                if (!find_extension_field(&iter))
-                    extension_range_start = (uint32_t)-1;
-                else
-                    extension_range_start = iter.tag;
+                size_t pos = stream->bytes_left;
 
-                if (tag >= extension_range_start)
+                if (!decode_extension(stream, tag, wire_type, extensions))
+                    return false;
+
+                if (pos != stream->bytes_left)
                 {
-                    size_t pos = stream->bytes_left;
-
-                    if (!decode_extension(stream, tag, wire_type, &iter))
-                        return false;
-
-                    if (pos != stream->bytes_left)
-                    {
-                        /* The field was handled */
-                        continue;
-                    }
+                    /* The field was handled */
+                    continue;
                 }
             }
 
@@ -1112,27 +1099,15 @@ static bool checkreturn pb_decode_inner(pb_istream_t *stream, const pb_msgdesc_t
 
     /* Check that all required fields were present. */
     {
-        /* First figure out the number of required fields by
-         * seeking to the end of the field array. Usually we
-         * are already close to end after decoding.
-         */
-        pb_size_t req_field_count;
-        pb_type_t last_type;
-        pb_size_t i;
-        do {
-            req_field_count = iter.required_field_index;
-            last_type = iter.type;
-        } while (pb_field_iter_next(&iter));
-
-        /* Fixup if last field was also required. */
-        if (PB_HTYPE(last_type) == PB_HTYPE_REQUIRED && iter.tag != 0)
-            req_field_count++;
-
-        if (req_field_count > PB_MAX_REQUIRED_FIELDS)
-            req_field_count = PB_MAX_REQUIRED_FIELDS;
+        pb_size_t req_field_count = iter.descriptor->required_field_count;
 
         if (req_field_count > 0)
         {
+            pb_size_t i;
+
+            if (req_field_count > PB_MAX_REQUIRED_FIELDS)
+                req_field_count = PB_MAX_REQUIRED_FIELDS;
+
             /* Check the whole words */
             for (i = 0; i < (req_field_count >> 5); i++)
             {
@@ -1277,7 +1252,7 @@ static void pb_release_single_field(pb_field_iter_t *field)
         
         if (field->pData)
         {
-            while (count--)
+            for (; count > 0; count--)
             {
                 pb_release(field->submsg_desc, field->pData);
                 field->pData = (char*)field->pData + field->data_size;
@@ -1294,7 +1269,7 @@ static void pb_release_single_field(pb_field_iter_t *field)
             /* Release entries in repeated string or bytes array */
             void **pItem = *(void***)field->pField;
             pb_size_t count = *(pb_size_t*)field->pSize;
-            while (count--)
+            for (; count > 0; count--)
             {
                 pb_free(*pItem);
                 *pItem++ = NULL;
@@ -1454,7 +1429,7 @@ static bool checkreturn pb_dec_varint(pb_istream_t *stream, const pb_field_iter_
 
             /* See issue 97: Google's C++ protobuf allows negative varint values to
             * be cast as int32_t, instead of the int64_t that should be used when
-            * encoding. Previous nanopb versions had a bug in encoding. In order to
+            * encoding. Nanopb versions before 0.2.5 had a bug in encoding. In order to
             * not break decoding of such messages, we cast <=32 bit fields to
             * int32_t first to get the sign correct.
             */
@@ -1483,31 +1458,6 @@ static bool checkreturn pb_dec_varint(pb_istream_t *stream, const pb_field_iter_
     }
 }
 
-static bool checkreturn pb_dec_fixed(pb_istream_t *stream, const pb_field_iter_t *field)
-{
-#ifdef PB_CONVERT_DOUBLE_FLOAT
-    if (field->data_size == sizeof(float) && PB_LTYPE(field->type) == PB_LTYPE_FIXED64)
-    {
-        return pb_decode_double_as_float(stream, (float*)field->pData);
-    }
-#endif
-
-    if (field->data_size == sizeof(uint32_t))
-    {
-        return pb_decode_fixed32(stream, field->pData);
-    }
-#ifndef PB_WITHOUT_64BIT
-    else if (field->data_size == sizeof(uint64_t))
-    {
-        return pb_decode_fixed64(stream, field->pData);
-    }
-#endif
-    else
-    {
-        PB_RETURN_ERROR(stream, "invalid data_size");
-    }
-}
-
 static bool checkreturn pb_dec_bytes(pb_istream_t *stream, const pb_field_iter_t *field)
 {
     uint32_t size;
@@ -1601,6 +1551,7 @@ static bool checkreturn pb_dec_string(pb_istream_t *stream, const pb_field_iter_
 static bool checkreturn pb_dec_submessage(pb_istream_t *stream, const pb_field_iter_t *field)
 {
     bool status = true;
+    bool submsg_consumed = false;
     pb_istream_t substream;
 
     if (!pb_make_string_substream(stream, &substream))
@@ -1609,19 +1560,6 @@ static bool checkreturn pb_dec_submessage(pb_istream_t *stream, const pb_field_i
     if (field->submsg_desc == NULL)
         PB_RETURN_ERROR(stream, "invalid field descriptor");
     
-    /* New array entries need to be initialized, while required and optional
-     * submessages have already been initialized in the top-level pb_decode. */
-    if (PB_HTYPE(field->type) == PB_HTYPE_REPEATED ||
-        PB_HTYPE(field->type) == PB_HTYPE_ONEOF)
-    {
-        pb_field_iter_t submsg_iter;
-        if (pb_field_iter_begin(&submsg_iter, field->submsg_desc, field->pData))
-        {
-            if (!pb_message_set_to_defaults(&submsg_iter))
-                PB_RETURN_ERROR(stream, "failed to set defaults");
-        }
-    }
-
     /* Submessages can have a separate message-level callback that is called
      * before decoding the message. Typically it is used to set callback fields
      * inside oneofs. */
@@ -1632,13 +1570,28 @@ static bool checkreturn pb_dec_submessage(pb_istream_t *stream, const pb_field_i
         if (callback->funcs.decode)
         {
             status = callback->funcs.decode(&substream, field, &callback->arg);
+
+            if (substream.bytes_left == 0)
+            {
+                submsg_consumed = true;
+            }
         }
     }
 
     /* Now decode the submessage contents */
-    if (status)
+    if (status && !submsg_consumed)
     {
-        status = pb_decode_inner(&substream, field->submsg_desc, field->pData, 0);
+        unsigned int flags = 0;
+
+        /* Static required/optional fields are already initialized by top-level
+         * pb_decode(), no need to initialize them again. */
+        if (PB_ATYPE(field->type) == PB_ATYPE_STATIC &&
+            PB_HTYPE(field->type) != PB_HTYPE_REPEATED)
+        {
+            flags = PB_DECODE_NOINIT;
+        }
+
+        status = pb_decode_inner(&substream, field->submsg_desc, field->pData, flags);
     }
     
     if (!pb_close_string_substream(stream, &substream))
@@ -1692,37 +1645,41 @@ bool pb_decode_double_as_float(pb_istream_t *stream, float *dest)
     {
         /* Special value */
         exponent = 128;
-    }
-    else if (exponent > 127)
-    {
-        /* Too large, convert to infinity */
-        exponent = 128;
-        mantissa = 0;
-    }
-    else if (exponent < -150)
-    {
-        /* Too small, convert to zero */
-        exponent = -127;
-        mantissa = 0;
-    }
-    else if (exponent < -126)
-    {
-        /* Denormalized */
-        mantissa |= 0x1000000;
-        mantissa >>= (-126 - exponent);
-        exponent = -127;
-    }
-
-    /* Round off mantissa */
-    mantissa = (mantissa + 1) >> 1;
-
-    /* Check if mantissa went over 2.0 */
-    if (mantissa & 0x800000)
-    {
-        exponent += 1;
-        mantissa &= 0x7FFFFF;
         mantissa >>= 1;
     }
+    else
+    {
+        if (exponent > 127)
+        {
+            /* Too large, convert to infinity */
+            exponent = 128;
+            mantissa = 0;
+        }
+        else if (exponent < -150)
+        {
+            /* Too small, convert to zero */
+            exponent = -127;
+            mantissa = 0;
+        }
+        else if (exponent < -126)
+        {
+            /* Denormalized */
+            mantissa |= 0x1000000;
+            mantissa >>= (-126 - exponent);
+            exponent = -127;
+        }
+
+        /* Round off mantissa */
+        mantissa = (mantissa + 1) >> 1;
+
+        /* Check if mantissa went over 2.0 */
+        if (mantissa & 0x800000)
+        {
+            exponent += 1;
+            mantissa &= 0x7FFFFF;
+            mantissa >>= 1;
+        }
+    }
 
     /* Combine fields */
     out.i = mantissa;

lib/nanopb/src/pb_encode.c

@@ -82,8 +82,11 @@ bool checkreturn pb_write(pb_ostream_t *stream, const pb_byte_t *buf, size_t cou
 {
     if (count > 0 && stream->callback != NULL)
     {
-        if (stream->bytes_written + count > stream->max_size)
+        if (stream->bytes_written + count < stream->bytes_written ||
+            stream->bytes_written + count > stream->max_size)
+        {
             PB_RETURN_ERROR(stream, "stream full");
+        }
 
 #ifdef PB_BUFFER_ONLY
         if (!buf_write(stream, buf, count))
@@ -262,9 +265,33 @@ static bool checkreturn pb_check_proto3_default_value(const pb_field_iter_t *fie
              * submessage fields. */
             return safe_read_bool(field->pSize) == false;
         }
+        else if (field->descriptor->default_value)
+        {
+            /* Proto3 messages do not have default values, but proto2 messages
+             * can contain optional fields without has_fields (generator option 'proto3').
+             * In this case they must always be encoded, to make sure that the
+             * non-zero default value is overwritten.
+             */
+            return false;
+        }
 
         /* Rest is proto3 singular fields */
-        if (PB_LTYPE(type) == PB_LTYPE_BYTES)
+        if (PB_LTYPE(type) <= PB_LTYPE_LAST_PACKABLE)
+        {
+            /* Simple integer / float fields */
+            pb_size_t i;
+            const char *p = (const char*)field->pData;
+            for (i = 0; i < field->data_size; i++)
+            {
+                if (p[i] != 0)
+                {
+                    return false;
+                }
+            }
+
+            return true;
+        }
+        else if (PB_LTYPE(type) == PB_LTYPE_BYTES)
         {
             const pb_bytes_array_t *bytes = (const pb_bytes_array_t*)field->pData;
             return bytes->size == 0;
@@ -302,27 +329,29 @@ static bool checkreturn pb_check_proto3_default_value(const pb_field_iter_t *fie
             return true;
         }
     }
-    
+    else if (PB_ATYPE(type) == PB_ATYPE_POINTER)
     {
-        /* Catch-all branch that does byte-per-byte comparison for zero value.
-         *
-         * This is for all pointer fields, and for static PB_LTYPE_VARINT,
-         * UVARINT, SVARINT, FIXED32, FIXED64, EXTENSION fields, and also
-         * callback fields. These all have integer or pointer value which
-         * can be compared with 0.
-         */
-        pb_size_t i;
-        const char *p = (const char*)field->pData;
-        for (i = 0; i < field->data_size; i++)
-        {
-            if (p[i] != 0)
-            {
-                return false;
-            }
-        }
-
-        return true;
+        return field->pData == NULL;
     }
+    else if (PB_ATYPE(type) == PB_ATYPE_CALLBACK)
+    {
+        if (PB_LTYPE(type) == PB_LTYPE_EXTENSION)
+        {
+            const pb_extension_t *extension = *(const pb_extension_t* const *)field->pData;
+            return extension == NULL;
+        }
+        else if (field->descriptor->field_callback == pb_default_field_callback)
+        {
+            pb_callback_t *pCallback = (pb_callback_t*)field->pData;
+            return pCallback->funcs.encode == NULL;
+        }
+        else
+        {
+            return field->descriptor->field_callback == NULL;
+        }
+    }
+
+    return false; /* Not typically reached, safe default for weird special cases. */
 }
 
 /* Encode a field with static or pointer allocation, i.e. one whose data
@@ -823,7 +852,7 @@ static bool checkreturn pb_enc_bytes(pb_ostream_t *stream, const pb_field_iter_t
     }
     
     if (PB_ATYPE(field->type) == PB_ATYPE_STATIC &&
-        PB_BYTES_ARRAY_T_ALLOCSIZE(bytes->size) > field->data_size)
+        bytes->size > field->data_size - offsetof(pb_bytes_array_t, bytes))
     {
         PB_RETURN_ERROR(stream, "bytes size exceeded");
     }

nrf52/ttgo_eink_qpsi.ini

@@ -8,10 +8,10 @@
 MemSize = 0x200000
 
 ; Define the desired ReadMode. Valid options are FASTREAD, READ2O, READ2IO, READ4O and READ4IO
-ReadMode = READ2IO
+ReadMode = READ4IO
 
 ; Define the desired WriteMode. Valid options are PP, PP2O, PP4O and PP4IO
-WriteMode = PP
+WriteMode = PP4IO
 
 ; Define the desired AddressMode. Valid options are BIT24 and BIT32
 AddressMode = BIT24
@@ -38,12 +38,10 @@ DIO0Pin = 12
 DIO0Port = 1
 DIO1Pin = 13
 DIO1Port = 1
-
-;These two pins are not connected, but we must name something
-DIO2Pin = 3
-DIO2Port = 1
+DIO2Pin = 7
+DIO2Port = 0
 DIO3Pin = 5
-DIO3Port = 1
+DIO3Port = 0
 
 ; Define the Index of the Write In Progress (WIP) bit in the status register. Valid options are in the range of 0 to 7.
 WIPIndex = 0
@@ -57,13 +55,8 @@ PPSize = PAGE256
 ; Numbers can be given in decimal, hex (starting with either 0x or 0X) and binary (starting with either 0b or 0B) formats. 
 ; The custom instructions will be executed in the order found. 
 
-; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling the Quad Operation and the High Performance
-; mode for the MX25R6435F memory present in the nRF52840 DK.
-;InitializationCustomInstruction =  0x06
-;InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]
-
 ; For MX25R1635F on TTGO board, only two data lines are connected
-; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) disabling Quad Operation and the High Performance
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling Quad Operation and the High Performance
 ; mode.  For normal operation you might want low power mode instead.
 InitializationCustomInstruction =  0x06
-InitializationCustomInstruction =  0x01, [0x00, 0, 0x2]
+InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]

nrf52/ttgo_eink_qpsi0.1.ini

@@ -0,0 +1,69 @@
+; nrfjprog.exe configuration file.
+
+; Note: QSPI flash is mapped into memory at address 0x12000000
+
+[DEFAULT_CONFIGURATION]
+; Define the capacity of the flash memory device in bytes. Set to 0 if no external memory device is present in your board.
+; MX25R1635F is 16Mbit/2Mbyte
+MemSize = 0x200000
+
+; Define the desired ReadMode. Valid options are FASTREAD, READ2O, READ2IO, READ4O and READ4IO
+ReadMode = READ2IO
+
+; Define the desired WriteMode. Valid options are PP, PP2O, PP4O and PP4IO
+WriteMode = PP
+
+; Define the desired AddressMode. Valid options are BIT24 and BIT32
+AddressMode = BIT24
+
+; Define the desired Frequency. Valid options are M2, M4, M8, M16 and M32
+Frequency = M16
+
+; Define the desired SPI mode. Valid options are MODE0 and MODE3
+SpiMode = MODE0
+
+; Define the desired SckDelay. Valid options are in the range 0 to 255
+SckDelay = 0x80
+
+; Define the desired IO level for DIO2 and DIO3 during a custom instruction. Valid options are LEVEL_HIGH and LEVEL_LOW
+CustomInstructionIO2Level = LEVEL_LOW
+CustomInstructionIO3Level = LEVEL_HIGH
+
+; Define the assigned pins for the QSPI peripheral. Valid options are those existing in your device
+CSNPin = 15
+CSNPort = 1
+SCKPin = 14
+SCKPort = 1
+DIO0Pin = 12
+DIO0Port = 1
+DIO1Pin = 13
+DIO1Port = 1
+
+;These two pins are not connected, but we must name something
+DIO2Pin = 3
+DIO2Port = 1
+DIO3Pin = 5
+DIO3Port = 1
+
+; Define the Index of the Write In Progress (WIP) bit in the status register. Valid options are in the range of 0 to 7.
+WIPIndex = 0
+
+; Define page size for commands. Valid sizes are PAGE256 and PAGE512.
+PPSize = PAGE256
+
+; Custom instructions to send to the external memory after initialization. Format is instruction code plus data to send in between optional brakets. 
+; These instructions will be executed each time the qspi peripheral is initiated by nrfjprog. 
+; To improve execution speed on consecutive interations with QSPI, you can run nrfjprog once with custom initialization, and then comment out the lines below.
+; Numbers can be given in decimal, hex (starting with either 0x or 0X) and binary (starting with either 0b or 0B) formats. 
+; The custom instructions will be executed in the order found. 
+
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling the Quad Operation and the High Performance
+; mode for the MX25R6435F memory present in the nRF52840 DK.
+;InitializationCustomInstruction =  0x06
+;InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]
+
+; For MX25R1635F on TTGO board, only two data lines are connected
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) disabling Quad Operation and the High Performance
+; mode.  For normal operation you might want low power mode instead.
+InitializationCustomInstruction =  0x06
+InitializationCustomInstruction =  0x01, [0x00, 0, 0x2]

platformio.ini

@@ -9,8 +9,15 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [platformio]
-default_envs = tbeam # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
-;default_envs = heltec # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
+default_envs = tbeam
+;default_envs = tbeam0.7
+;default_envs = heltec
+;default_envs = tlora-v1
+;default_envs = tlora-v2
+;default_envs = lora-relay-v1 # nrf board
+;default_envs = eink
+;default_envs = nrf52840dk-geeksville
+;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 
 [common]
 ; common is not currently used
@@ -19,26 +26,24 @@ default_envs = tbeam # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you
 ; The following environment variables must be set in the shell if you'd like to override them.
 ; They are used in this ini file as systenv.VARNAME, so in your shell do export "VARNAME=fish"
 ; COUNTRY (default US), i.e. "export COUNTRY=EU865"
-; APP_VERSION (default emptystring)
 ; HW_VERSION (default emptystring)
 
 [env]
 
+; note: APP_VERSION now comes from bin/version.json
+extra_scripts = bin/platformio-custom.py 
+
 ; note: we add src to our include search path so that lmic_project_config can override
+; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
+; of code is a heap corruption bug!
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
-build_flags = -Wno-missing-field-initializers -Isrc -Isrc/mesh -Isrc/gps -Ilib/nanopb/include -Wl,-Map,.pio/build/output.map 
+build_flags = -Wno-missing-field-initializers
+  -Wno-format 
+  -Isrc -Isrc/mesh -Isrc/gps -Ilib/nanopb/include -Wl,-Map,.pio/build/output.map 
   -DHW_VERSION_${sysenv.COUNTRY}
-  -DAPP_VERSION=${sysenv.APP_VERSION}
   -DHW_VERSION=${sysenv.HW_VERSION}
   -DUSE_THREAD_NAMES
-
-; leave this commented out to avoid breaking Windows
-;upload_port = /dev/ttyUSB0
-;monitor_port = /dev/ttyUSB0
-
-; geeksville: I think setting this should not be required - it breaks linux
-;upload_port = /dev/cu.SLAB_USBtoUART
-;monitor_port = /dev/cu.SLAB_USBtoUART
+  -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 
 ; the default is esptool
 ; upload_protocol = esp-prog
@@ -59,17 +64,17 @@ debug_tool = jlink
 ;  monitor adapter_khz 10000
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git ; ESP8266_SSD1306 
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#35d796226b853b0c0ff818b2f1aa3d35e7296a96 ; ESP8266_SSD1306 
   https://github.com/geeksville/OneButton.git ; OneButton library for non-blocking button debounce
   1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
-  https://github.com/meshtastic/arduino-fsm.git#2f106146071fc7bc620e1e8d4b88dc4e0266ce39
+  https://github.com/meshtastic/arduino-fsm.git#55c47b6cded91645aff05a27b6e5821d8d0f64be
   https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad
-  https://github.com/meshtastic/RadioLib.git#8657380241bce681c33aab46598bbf13b11f876c
-  https://github.com/meshtastic/TinyGPSPlus.git 
+  https://github.com/meshtastic/RadioLib.git#07de964e929238949035fb0d5887026a3058df1a
+  https://github.com/meshtastic/TinyGPSPlus.git#f0f47067ef2f67c856475933188251c1ef615e79
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
   Wire ; explicitly needed here because the AXP202 library forgets to add it
   SPI
-  https://github.com/geeksville/ArduinoThread.git#333ffd09b596977c217ba25da4258f588b462ac6
+  https://github.com/geeksville/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
   
 ; Common settings for conventional (non Portduino) Ardino targets
 [arduino_base]
@@ -95,11 +100,23 @@ build_flags =
   ${arduino_base.build_flags} -Wall -Wextra -Isrc/esp32 -Isrc/esp32-mfix-esp32-psram-cache-issue -lnimble -std=c++11 
   -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
   -DAXP_DEBUG_PORT=Serial
+lib_deps =
+  ${arduino_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git
+  adafruit/DHT sensor library@^1.4.1
+  adafruit/Adafruit Unified Sensor@^1.1.4
 # Hmm - this doesn't work yet
 # board_build.ldscript = linker/esp32.extram.bss.ld
 lib_ignore = segger_rtt
 platform_packages =
-    framework-arduinoespressif32@https://github.com/meshtastic/arduino-esp32.git#2814f110aa618429bdd9a0a2d6a93c55f29f87a6
+    framework-arduinoespressif32@https://github.com/meshtastic/arduino-esp32.git#352c8ea7cb73f10433ed139f34251979c470ad56
+
+; leave this commented out to avoid breaking Windows
+upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
@@ -117,7 +134,7 @@ board_build.partitions = partition-table.csv
 extends = esp32_base
 board = ttgo-t-beam
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags} -D TBEAM_V10
 
@@ -170,20 +187,40 @@ src_filter =
 ; platform = nordicnrf52
 platform = https://github.com/meshtastic/platform-nordicnrf52.git#1a2639a6b0f79b5df66bea3e3089f0d5285fdc63
 extends = arduino_base
-debug_tool = jlink
 build_type = debug ; I'm debugging with ICE a lot now
 ; note: liboberon provides the AES256 implementation for NRF52 (though not using the hardware acceleration of the NRF52840 - FIXME)
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
   -Isrc/nrf52 
-  -Isdk-nrfxlib/crypto/nrf_oberon/include -Lsdk-nrfxlib/crypto/nrf_oberon/lib/cortex-m4/hard-float/ -lliboberon_3.0.3 
+  -Isdk-nrfxlib/crypto/nrf_oberon/include -Lsdk-nrfxlib/crypto/nrf_oberon/lib/cortex-m4/hard-float/ -lliboberon_3.0.7 
 ;-DCFG_DEBUG=3
 src_filter = 
-  ${arduino_base.src_filter} -<esp32/> -<nimble/> -<meshwifi/>
+  ${arduino_base.src_filter} -<esp32/> -<nimble/> -<mesh/wifi/> -<mesh/http/> -<plugins/esp32>
 lib_ignore =
   BluetoothOTA
 monitor_port = /dev/ttyACM1
 
+# we pass in options to jlink so it can understand freertos (note: we don't use "jlink" as the tool)
+debug_tool = jlink
+debug_port = :2331
+# Note: the ARGUMENTS MUST BE on multiple lines.  Otherwise platformio/commands/debug/helpers.py misparses everything into the "executable"
+# attribute and leaves "arguments" empty
+# /home/kevinh/.platformio/packages/tool-jlink/JLinkGDBServerCLExe 
+# This doesn't work yet, so not using for now
+disabled_debug_server = 
+  /usr/bin/JLinkGDBServerCLExe
+  -singlerun 
+  -if 
+  SWD 
+  -select 
+  USB 
+  -device 
+  nRF52840_xxAA 
+  -port 
+  2331 
+  -rtos 
+  GDBServer/RTOSPlugin_FreeRTOS
+
 debug_extra_cmds =
   source gdbinit
 
@@ -234,7 +271,16 @@ lib_deps =
   ${arduino_base.lib_deps}
   UC1701
 
-; Prototype eink/nrf52840/sx1262 device
+; The PPR board
+[env:ppr1]
+extends = nrf52_base
+board = ppr1
+build_flags = ${nrf52_base.build_flags} -Ivariants/ppr1
+src_filter = ${nrf52_base.src_filter} +<../variants/ppr1>
+lib_deps = 
+  ${arduino_base.lib_deps}
+
+; First prototype eink/nrf52840/sx1262 device
 [env:eink]
 extends = nrf52_base
 board = eink
@@ -248,6 +294,20 @@ lib_deps =
   https://github.com/geeksville/EPD_Libraries.git
   TFT_eSPI
 
+; First prototype eink/nrf52840/sx1262 device
+[env:eink0.1]
+extends = nrf52_base
+board = eink0.1
+# add our variants files to the include and src paths
+# define build flags for the TFT_eSPI library
+build_flags = ${nrf52_base.build_flags} -Ivariants/eink0.1
+  -DBUSY_PIN=3 -DRST_PIN=2 -DDC_PIN=28 -DCS_PIN=30
+src_filter = ${nrf52_base.src_filter} +<../variants/eink0.1>
+lib_deps = 
+  ${arduino_base.lib_deps}
+  https://github.com/geeksville/EPD_Libraries.git
+  TFT_eSPI
+
 ; The https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay board by @BigCorvus
 [env:lora-relay-v1]
 extends = nrf52_base
@@ -269,12 +329,46 @@ lib_deps =
   ${arduino_base.lib_deps}
   SparkFun BQ27441 LiPo Fuel Gauge Arduino Library
   TFT_eSPI
-  # Adafruit ST7735 and ST7789 Library
+
+; The https://github.com/BigCorvus/LoRa-BLE-Relay-v2 board by @BigCorvus
+[env:lora-relay-v2]
+extends = nrf52_base
+board = lora-relay-v2
+# add our variants files to the include and src paths
+# define build flags for the TFT_eSPI library
+build_flags = ${nrf52_base.build_flags} -Ivariants/lora_relay_v2
+  -DUSER_SETUP_LOADED
+  -DTFT_WIDTH=80
+  -DTFT_HEIGHT=160
+  -DST7735_GREENTAB160x80
+  -DST7735_DRIVER
+  -DTFT_CS=ST7735_CS
+  -DTFT_DC=ST7735_RS
+  -DTFT_RST=ST7735_RESET
+  -DSPI_FREQUENCY=27000000
+  -DTFT_WR=ST7735_SDA
+  -DTFT_SCLK=ST7735_SCK
+src_filter = ${nrf52_base.src_filter} +<../variants/lora_relay_v2>
+lib_deps = 
+  ${arduino_base.lib_deps}
+  SparkFun BQ27441 LiPo Fuel Gauge Arduino Library
+  TFT_eSPI
 
 ; The Portduino based sim environment on top of linux
-[env:linux]
-platform = https://github.com/geeksville/platform-portduino.git
-src_filter = ${env.src_filter} -<esp32/> -<nimble/> -<nrf52/> -<meshwifi/>
+[env:native]
+platform = https://github.com/geeksville/platform-native.git 
+src_filter = ${env.src_filter} -<esp32/> -<nimble/> -<nrf52/> -<mesh/http/> -<plugins/esp32>
 build_flags = ${arduino_base.build_flags} -O0
 framework = arduino
-board = linux_x86_64
+board = native
+lib_deps =
+  ${arduino_base.lib_deps}
+  rweather/Crypto
+
+; The GenieBlocks LORA prototype board
+; note: @geeksville disabled because genieblocks_lora is not checked into the boards directory, please send in a PR to add it ;-)
+;[env:genieblocks_lora]
+;extends = esp32_base
+;board = genieblocks_lora
+;build_flags = 
+;  ${esp32_base.build_flags} -D GENIEBLOCKS

src/FSCommon.cpp

@@ -0,0 +1,21 @@
+#include "FSCommon.h"
+
+void fsInit()
+{
+#ifdef FS
+    if (!FSBegin()) 
+    {
+        DEBUG_MSG("ERROR filesystem mount Failed\n");
+        assert(0); // FIXME - report failure to phone
+    }
+
+    DEBUG_MSG("Filesystem files:\n");
+    File dir = FS.open("/");
+    File f = dir.openNextFile();
+    while (f) {
+        DEBUG_MSG("  %s\n", f.name());
+        f.close();
+        f = dir.openNextFile(); 
+    }
+#endif
+}

src/FSCommon.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "configuration.h"
+
+// Cross platform filesystem API
+
+#ifdef PORTDUINO
+// Portduino version
+#include "PortduinoFS.h"
+#define FS PortduinoFS
+#define FSBegin() true
+#define FILE_O_WRITE "w"
+#define FILE_O_READ "r"
+#elif !defined(NO_ESP32)
+// ESP32 version
+#include "SPIFFS.h"
+#define FS SPIFFS
+#define FSBegin() FS.begin(true)
+#define FILE_O_WRITE "w"
+#define FILE_O_READ "r"
+#else
+// NRF52 version
+#include "InternalFileSystem.h"
+#define FS InternalFS
+#define FSBegin() FS.begin()
+using namespace Adafruit_LittleFS_Namespace;
+#endif
+
+void fsInit();

src/Observer.h

@@ -16,6 +16,10 @@ template <class T> class Observer
   public:
     virtual ~Observer();
 
+    /// Stop watching our current obserable
+    void unobserve();
+
+    /// Start watching a specified observable
     void observe(Observable<T> *o);
 
   private:
@@ -82,6 +86,11 @@ template <class T> class Observable
 };
 
 template <class T> Observer<T>::~Observer()
+{
+    unobserve();
+}
+
+template <class T> void Observer<T>::unobserve()
 {
     if (observed)
         observed->removeObserver(this);

src/Power.cpp

@@ -1,4 +1,5 @@
 #include "power.h"
+#include "NodeDB.h"
 #include "PowerFSM.h"
 #include "main.h"
 #include "sleep.h"
@@ -18,6 +19,21 @@ Power *power;
 
 using namespace meshtastic;
 
+#if defined(NRF52_SERIES)
+/*
+ * Internal Reference is +/-0.6V, with an adjustable gain of 1/6, 1/5, 1/4,
+ * 1/3, 1/2 or 1, meaning 3.6, 3.0, 2.4, 1.8, 1.2 or 0.6V for the ADC levels.
+ *
+ * External Reference is VDD/4, with an adjustable gain of 1, 2 or 4, meaning
+ * VDD/4, VDD/2 or VDD for the ADC levels.
+ *
+ * Default settings are internal reference with 1/6 gain (GND..3.6V ADC range)
+ */
+#define AREF_VOLTAGE 3.6
+#else
+#define AREF_VOLTAGE 3.3
+#endif
+
 /**
  * If this board has a battery level sensor, set this to a valid implementation
  */
@@ -37,10 +53,13 @@ class AnalogBatteryLevel : public HasBatteryLevel
     {
         float v = getBattVoltage() / 1000;
 
-        if (v < 2.1)
+        if (v < noBatVolt)
             return -1; // If voltage is super low assume no battery installed
 
-        return 100 * (v - 3.27) / (4.2 - 3.27);
+        if (v > chargingVolt)
+            return 0; // While charging we can't report % full on the battery
+
+        return 100 * (v - emptyVolt) / (fullVolt - emptyVolt);
     }
 
     /**
@@ -48,9 +67,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
      */
     virtual float getBattVoltage()
     {
+        // Tested ttgo eink nrf52 board and the reported value is perfect
+        // DEBUG_MSG("raw val %u", raw);
         return
 #ifdef BATTERY_PIN
-            1000.0 * analogRead(BATTERY_PIN) * 2.0 * (3.3 / 1024.0);
+            1000.0 * 2.0 * (AREF_VOLTAGE / 1024.0) * analogRead(BATTERY_PIN);
 #else
             NAN;
 #endif
@@ -59,7 +80,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() { return getBattVoltage() != -1; }
+    virtual bool isBatteryConnect() { return getBattPercentage() != -1; }
+
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
+    virtual bool isVBUSPlug() { return getBattVoltage() > 1000 * chargingVolt; }
+
+    /// Assume charging if we have a battery and external power is connected.
+    /// we can't be smart enough to say 'full'?
+    virtual bool isChargeing() { return isBatteryConnect() && isVBUSPlug(); }
+
+  private:
+    /// If we see a battery voltage higher than physics allows - assume charger is pumping
+    /// in power
+    const float fullVolt = 4.2, emptyVolt = 3.27, chargingVolt = 4.3, noBatVolt = 2.1;
 } analogLevel;
 
 Power::Power() : OSThread("Power") {}
@@ -68,10 +102,18 @@ bool Power::analogInit()
 {
 #ifdef BATTERY_PIN
     DEBUG_MSG("Using analog input for battery level\n");
+
+    // disable any internal pullups
+    pinMode(BATTERY_PIN, INPUT);
+
 #ifndef NO_ESP32
     // ESP32 needs special analog stuff
     adcAttachPin(BATTERY_PIN);
 #endif
+#ifdef NRF52_SERIES
+    analogReference(AR_INTERNAL); // 3.6V
+#endif
+
     // adcStart(BATTERY_PIN);
     analogReadResolution(10); // Default of 12 is not very linear. Recommended to use 10 or 11 depending on needed resolution.
     batteryLevel = &analogLevel;
@@ -93,6 +135,14 @@ bool Power::setup()
     return found;
 }
 
+void Power::shutdown()
+{
+#ifdef TBEAM_V10
+    DEBUG_MSG("Shutting down\n");
+    axp.shutdown();
+#endif
+}
+
 /// Reads power status to powerStatus singleton.
 //
 // TODO(girts): move this and other axp stuff to power.h/power.cpp.
@@ -121,7 +171,8 @@ void Power::readPowerStatus()
         const PowerStatus powerStatus =
             PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVBUSPlug() ? OptTrue : OptFalse,
                         batteryLevel->isChargeing() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
-        DEBUG_MSG("Read power stat %d\n", powerStatus.getHasUSB());
+        DEBUG_MSG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus.getHasUSB(),
+                  powerStatus.getIsCharging(), powerStatus.getBatteryVoltageMv(), powerStatus.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus);
 
         // If we have a battery at all and it is less than 10% full, force deep sleep
@@ -218,7 +269,42 @@ bool Power::axp192Init()
             DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
             DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
 
-            axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1320MA); // actual limit (in HW) on the tbeam is 450mA
+            if (radioConfig.preferences.charge_current == ChargeCurrent_MAUnset) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA100) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_100MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA190) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_190MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA280) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_280MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA360) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_360MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA450) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA550) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_550MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA630) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_630MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA700) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_700MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA780) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_780MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA880) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_880MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA960) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_960MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA1000) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1000MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA1080) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1080MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA1160) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1160MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA1240) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1240MA);
+            } else if (radioConfig.preferences.charge_current == ChargeCurrent_MA1320) {
+                axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1320MA);
+            }
+
 #if 0
 
       // Not connected

src/PowerFSM.cpp

@@ -144,7 +144,8 @@ static void onEnter()
 
     uint32_t now = millis();
 
-    if (now - lastPingMs > 30 * 1000) { // if more than a minute since our last press, ask other nodes to update their state
+    if (now - lastPingMs >
+        30 * 1000) { // if more than a minute since our last press, ask node we are looking at to update their state
         if (displayedNodeNum)
             service.sendNetworkPing(displayedNodeNum, true); // Refresh the currently displayed node
         lastPingMs = now;
@@ -170,11 +171,19 @@ Fsm powerFSM(&stateBOOT);
 
 void PowerFSM_setup()
 {
+    bool isRouter = radioConfig.preferences.is_router;
+        
     // If we are not a router and we already have AC power go to POWER state after init, otherwise go to ON
     // We assume routers might be powered all the time, but from a low current (solar) source
-    bool isLowPower = radioConfig.preferences.is_low_power;
-    bool hasPower = !isLowPower && powerStatus && powerStatus->getHasUSB();
-    bool isRouter = radioConfig.preferences.is_router;
+    bool isLowPower = radioConfig.preferences.is_low_power || isRouter;
+
+    /* To determine if we're externally powered, assumptions
+        1) If we're powered up and there's no battery, we must be getting power externally. (because we'd be dead otherwise)
+
+        2) If we detect USB power from the power management chip, we must be getting power externally. 
+    */
+    bool hasPower = !isLowPower && powerStatus && (!powerStatus->getHasBattery() || powerStatus->getHasUSB());
+
     DEBUG_MSG("PowerFSM init, USB power=%d\n", hasPower);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
@@ -244,20 +253,24 @@ void PowerFSM_setup()
 
     powerFSM.add_timed_transition(&stateON, &stateDARK, getPref_screen_on_secs() * 1000, NULL, "Screen-on timeout");
 
-    powerFSM.add_timed_transition(&stateDARK, &stateNB, getPref_phone_timeout_secs() * 1000, NULL, "Phone timeout");
+    // On most boards we use light-sleep to be our main state, but on NRF52 we just stay in DARK
+    State *lowPowerState = &stateLS;
 
 #ifndef NRF52_SERIES
-    // We never enter light-sleep state on NRF52 (because the CPU uses so little power normally)
-    powerFSM.add_timed_transition(&stateNB, &stateLS, getPref_min_wake_secs() * 1000, NULL, "Min wake timeout");
+    // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 
+    powerFSM.add_timed_transition(&stateDARK, &stateNB, getPref_phone_timeout_secs() * 1000, NULL, "Phone timeout");
+    powerFSM.add_timed_transition(&stateNB, &stateLS, getPref_min_wake_secs() * 1000, NULL, "Min wake timeout");
     powerFSM.add_timed_transition(&stateDARK, &stateLS, getPref_wait_bluetooth_secs() * 1000, NULL, "Bluetooth timeout");
+#else
+    lowPowerState = &stateDARK;
 #endif
 
     auto meshSds = getPref_mesh_sds_timeout_secs();
     if (meshSds != UINT32_MAX)
-        powerFSM.add_timed_transition(&stateLS, &stateSDS, meshSds * 1000, NULL, "mesh timeout");
+        powerFSM.add_timed_transition(lowPowerState, &stateSDS, meshSds * 1000, NULL, "mesh timeout");
     // removing for now, because some users don't even have phones
-    // powerFSM.add_timed_transition(&stateLS, &stateSDS, getPref_phone_sds_timeout_sec() * 1000, NULL, "phone
+    // powerFSM.add_timed_transition(lowPowerState, &stateSDS, getPref_phone_sds_timeout_sec() * 1000, NULL, "phone
     // timeout");
 
     powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state